None (yet) A. Barth
Internet-Draft U.C. Berkeley
Expires: May 15, 2010 November 11, 2009
HTTP State Management Mechanism
draft-abarth-cookie-04
Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with the
provisions of BCP 78 and BCP 79. This document may contain material
from IETF Documents or IETF Contributions published or made publicly
available before November 10, 2008. The person(s) controlling the
copyright in some of this material may not have granted the IETF
Trust the right to allow modifications of such material outside the
IETF Standards Process. Without obtaining an adequate license from
the person(s) controlling the copyright in such materials, this
document may not be modified outside the IETF Standards Process, and
derivative works of it may not be created outside the IETF Standards
Process, except to format it for publication as an RFC or to
translate it into languages other than English.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on May 15, 2010.
Copyright Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents in effect on the date of
Barth Expires May 15, 2010 [Page 1]
Internet-Draft HTTP State Management Mechanism November 2009
publication of this document (http://trustee.ietf.org/license-info).
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document.
Barth Expires May 15, 2010 [Page 2]
Internet-Draft HTTP State Management Mechanism November 2009
Abstract
This document defines the HTTP Cookie and Set-Cookie headers.
NOTE: Much of the text herein is completely wrong. If you have
suggestions for improving the draft, please send email to
http-state@ietf.org. Suggestions with test cases are especially
appreciated.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1. Examples . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Protocol Description . . . . . . . . . . . . . . . . . . . . . 7
4.1. Set-Cookie . . . . . . . . . . . . . . . . . . . . . . . . 7
4.1.1. Syntax . . . . . . . . . . . . . . . . . . . . . . . . 7
4.1.2. Semantics . . . . . . . . . . . . . . . . . . . . . . 8
4.2. Cookie . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2.1. Syntax . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2.2. Semantics . . . . . . . . . . . . . . . . . . . . . . 10
4.3. Controlling Caching . . . . . . . . . . . . . . . . . . . 10
5. User Agent Conformance . . . . . . . . . . . . . . . . . . . . 12
5.1. Parsing the Set-Cookie Header . . . . . . . . . . . . . . 12
5.1.1. The Max-Age Attribute . . . . . . . . . . . . . . . . 14
5.1.2. The Expires Attribute . . . . . . . . . . . . . . . . 14
5.1.3. The Domain Attribute . . . . . . . . . . . . . . . . . 16
5.1.4. The Path Attribute . . . . . . . . . . . . . . . . . . 16
5.1.5. The Secure Attribute . . . . . . . . . . . . . . . . . 17
5.1.6. The HttpOnly Attribute . . . . . . . . . . . . . . . . 17
5.2. Storage Model . . . . . . . . . . . . . . . . . . . . . . 18
5.3. The Cookie Header . . . . . . . . . . . . . . . . . . . . 20
6. Implementation Considerations . . . . . . . . . . . . . . . . 23
6.1. Set-Cookie Content . . . . . . . . . . . . . . . . . . . . 23
6.2. Implementation Limits . . . . . . . . . . . . . . . . . . 23
7. Security Considerations . . . . . . . . . . . . . . . . . . . 24
7.1. Clear Text . . . . . . . . . . . . . . . . . . . . . . . . 24
7.2. Weak Isolation . . . . . . . . . . . . . . . . . . . . . . 24
7.3. Cookie Spoofing . . . . . . . . . . . . . . . . . . . . . 24
8. Other, Similar, Proposals . . . . . . . . . . . . . . . . . . 25
Appendix A. Acknowledgements . . . . . . . . . . . . . . . . . . 26
Appendix B. Tabled Items . . . . . . . . . . . . . . . . . . . . 27
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 28
Barth Expires May 15, 2010 [Page 3]
Internet-Draft HTTP State Management Mechanism November 2009
1. Introduction
This document defines the HTTP Cookie and Set-Cookie header.
Barth Expires May 15, 2010 [Page 4]
Internet-Draft HTTP State Management Mechanism November 2009
2. Terminology
The terms user agent, client, server, proxy, and origin server have
the same meaning as in the HTTP/1.0 specification.
Fully-qualified host name (FQHN) means either the fully-qualified
domain name (FQDN) of a host (i.e., a completely specified domain
name ending in a top-level domain such as .com or .uk), or the
numeric Internet Protocol (IP) address of a host. The fully
qualified domain name is preferred; use of numeric IP addresses is
strongly discouraged. [TODO: What does "strongly discouraged" mean?]
The terms request-host and request-URI refer to the values the client
would send to the server as, respectively, the host (but not port)
and abs_path portions of the absoluteURI (http_URL) of the HTTP
request line. Note that request-host must be a FQHN. Hosts names
can be specified either as an IP address or a FQHN string.
Because it was used in Netscape's original implementation of state
management, we will use the term cookie to refer to the state
information that passes between an origin server and user agent, and
that gets stored by the user agent.
Barth Expires May 15, 2010 [Page 5]
Internet-Draft HTTP State Management Mechanism November 2009
3. Overview
We outline here a way for an origin server to send state information
to the user agent, and for the user agent to return the state
information to the origin server.
The origin server initiates a session, if it so desires, by including
a Set-Cookie header in an HTTP response. (Note that "session" here
does not refer to a persistent network connection but to a logical
session created from HTTP requests and responses. The presence or
absence of a persistent connection should have no effect on the use
of cookie-derived sessions).
A user agent returns a Cookie request header (see below) to the
origin server if it chooses to continue a session. The origin server
may ignore it or use it to determine the current state of the
session. It may send the client a Set-Cookie response header with
the same or different information, or it may send no Set-Cookie
header at all.
Servers may return a Set-Cookie response headers with any response.
User agents should send Cookie request headers, subject to other
rules detailed below, with every request.
An origin server may include multiple Set-Cookie headers in a
response. Note that an intervening gateway MUST NOT fold multiple
Set-Cookie headers into a single header.
[TODO: Overview the Set-Cookie and Cookie headers.]
3.1. Examples
[TODO: Put some examples here.
Barth Expires May 15, 2010 [Page 6]
Internet-Draft HTTP State Management Mechanism November 2009
4. Protocol Description
The cookie protocol consists of two HTTP headers: the Set-Cookie
header and the Cookie header. The server sends the Set-Cookie header
is to the user agent in an HTTP response, causing the user agent to
modify the Cookie header it returns to the server.
This section describes the syntax and semantics of the protocol.
Detailed conformance requirements for user agents are given in
Section [TODO].
4.1. Set-Cookie
4.1.1. Syntax
Informally, the Set-Cookie response header comprises the token Set-
Cookie:, followed by a cookie. Each cookie begins with a name-value-
pair, followed by zero or more semi-colon-separated attribute-value
pairs.
set-cookie-header = "Set-Cookie:" name-value-pairs
name-value-pairs = name-value-pair *(";" name-value-pair)
name-value-pair = name ["=" value] ; optional value
name = token
value = *CHAR
The valid character for the value production vary depending on the
attribute name.
[TODO: Investigate what token actually means.]
Attributes names are case-insensitive. White space is permitted
between tokens. Servers MUST NOT include two attributes with the
same name. Note that although the above syntax description shows
value as optional, some attributes require values.
The cookie-value is opaque to the user agent and MAY be anything the
origin server chooses to send, possibly in a server-selected
printable ASCII encoding. "Opaque" implies that the content is of
interest and relevance only to the origin server. The content may,
in fact, be readable by anyone who examines the Set-Cookie header.
NOTE: The syntax above allows whitespace between the attribute and
the U+3D ("=") character. Servers wishing to interoperate with some
legacy user agents might wish to elide this extra white space to
maximize compatibility.
Barth Expires May 15, 2010 [Page 7]
Internet-Draft HTTP State Management Mechanism November 2009
4.1.2. Semantics
When the user agent receives a Set-Cookie header, the user agent
stores the cookie in its cookie store. When the user agent makes
another HTTP request to the origin server, the user agent returns the
cookie in the Cookie header.
The server can override the default handling of cookies by specifying
cookie attributes. User agents ignore unrecognized cookie
attributes.
4.1.2.1. Max-Age
[TODO: Consider removing Max-Age from the server conformance section
because it's not supported by IE.]
Syntax A sequence of ASCII numerals.
Semantics The value of the Max-Age attribute represents the maximum
lifetime of the cookie, measured in seconds from the moment the
user agent receives the cookie. If the server does not supply an
Expires or a Max-Age attribute, the lifetime of the cookie is
limited to the current session (as defined by the user agent).
4.1.2.2. Expires
Syntax An RFC 1123 date [cite]. (Note that user agents use very
forgiving date parers; see Section [TODO]).
Semantics The value of the Expires attribute represents the maximum
lifetime of the cookie, represented as the point in time at which
the cookie expires. If the server does not supply an Expires or a
Max-Age attribute, the lifetime of the cookie is limited to the
current session (as defined by the user agent).
4.1.2.3. Domain
[TODO: Test Domain.] The Domain attribute specifies the domain for
which the cookie is valid. The leading dot isn't required. If there
is no Domain attribute, the default is to return the cookie only to
the origin server. [TODO: You can only set cookies for related
domains.]
4.1.2.4. Path
Barth Expires May 15, 2010 [Page 8]
Internet-Draft HTTP State Management Mechanism November 2009
Syntax A sequence of characters beginning with a "/" character.
Semantics The Path attribute specifies the scope of the cookie
within a given FQDN. The user agent will include a cookie in an
HTTP request only if the Request-URI's path matches, or is a
subdirectory of, the cookie's Path attribute (where the "/"
character is interpreted as a directory separator). The default
value for the Path attribute is the directory of the Request-URI
when the cookie was received.
4.1.2.5. Secure
Syntax Servers MUST NOT include a value.
Semantics The user agent SHOULD protect the confidentiality of
cookies with the Secure attribute by not transmitting Secure
cookies over an "insecure" channel (where "insecure" is defined by
the user agent).
4.1.2.6. HttpOnly
Syntax Servers MUST NOT include a value.
Semantics The user agent SHOULD protect confidentiality of cookies
with the HttpOnly attribute by not revealing their contents via
"non-HTTP" APIs. (Note that this document does not define which
APIs are "non-HTTP".)
4.2. Cookie
4.2.1. Syntax
The user agent returns stored cookies to the origin server in the
Cookie header. The Cookie header shares a common syntax with the
Set-Cookie header, but the semantics of the header differ
dramatically.
cookie-header = "Cookie:" name-value-pairs
name-value-pairs = name-value-pair *(";" name-value-pair)
name-value-pair = name "=" value
name = token
value = *CHAR
NOTE: If the server supplies a Set-Cookie header that does not
conform to the grammar in Section [TODO], the user agent might not
supply a Cookie header that conforms to the preceding grammar.
Barth Expires May 15, 2010 [Page 9]
Internet-Draft HTTP State Management Mechanism November 2009
4.2.2. Semantics
Each name-value-pair represents a cookie stored by the user agent.
The cookie name is returned in as the name and the cookie value is
returned as the value.
The meaning of the cookies in the Cookie header is not defined by
this document. Servers are expected to imbue these cookies with
server-specific semantics.
4.3. Controlling Caching
[TODO: Should we go into this much detail here? This seems redundant
with the HTTP specs.]
An origin server must be cognizant of the effect of possible caching
of both the returned resource and the Set-Cookie header. Caching
"public" documents is desirable. For example, if the origin server
wants to use a public document such as a "front door" page as a
sentinel to indicate the beginning of a session for which a Set-
Cookie response header must be generated, the page should be stored
in caches "pre-expired" so that the origin server will see further
requests. "Private documents", for example those that contain
information strictly private to a session, should not be cached in
shared caches.
If the cookie is intended for use by a single user, the Set-Cookie
header should not be cached. A Set-Cookie header that is intended to
be shared by multiple users may be cached.
The origin server should send the following additional HTTP/1.1
response headers, depending on circumstances: [TODO: Is this good
advice?]
o To suppress caching of the Set-Cookie header: Cache-control: no-
cache="set-cookie".
and one of the following:
o To suppress caching of a private document in shared caches: Cache-
Control: private.
o To allow caching of a document and require that it be validated
before returning it to the client: Cache-Control: must-revalidate.
o To allow caching of a document, but to require that proxy caches
(not user agent caches) validate it before returning it to the
client: Cache-Control: proxy-revalidate.
Barth Expires May 15, 2010 [Page 10]
Internet-Draft HTTP State Management Mechanism November 2009
o To allow caching of a document and request that it be validated
before returning it to the client (by "pre-expiring" it): Cache-
Control: max-age=0. Not all caches will revalidate the document
in every case.
HTTP/1.1 servers must send Expires: old-date (where old-date is a
date long in the past) on responses containing Set-Cookie response
headers unless they know for certain (by out of band means) that
there are no downstream HTTP/1.0 proxies. HTTP/1.1 servers may send
other Cache-Control directives that permit caching by HTTP/1.1
proxies in addition to the Expires: old-date directive; the Cache-
Control directive will override the Expires: old-date for HTTP/1.1
proxies.
Barth Expires May 15, 2010 [Page 11]
Internet-Draft HTTP State Management Mechanism November 2009
5. User Agent Conformance
Not all origin servers conform to the behavior specified in the
previous section. To ensure interoperability, user agents MUST
process cookies in a manner that is "black-box" indistinguishable
from the requirements in this section.
5.1. Parsing the Set-Cookie Header
Let an LWS character be either a U+20 (SPACE) or a U+09 (TAB)
character.
When a user agent recieves an Set-Cookie header in an HTTP response,
the user agent *receives a set-cookie-string* consisting of the value
of the header.
A user agent MUST use the following algorithm to parse set-cookie-
strings:
1. [TODO: Deal with "," characters. My current thinking is that we
don't actually have to do anything special for them.]
2. If the header contains a U+3B (";") character:
the name-value-pair string is characters up to, but not
including, the first U+3B (";"), and the unparsed-cookie-
attributes are the remainder of the header (including the U+3B
(";") in question).
Otherwise:
the name-value-pair string is all the character contained in
the header, and the unparsed-cookie-attributes is the empty
string.
3. If the name-value-pair string contains a U+3D ("=") character:
the (possibly empty) name string is the characters up to, but
not including, the first U+3D ("=") character, and the
(possibly empty) value string is the characters after the
first U+3D ("=") character.
Otherwise:
the name string is empty, and the value string is the entire
name-value-pair string.
Barth Expires May 15, 2010 [Page 12]
Internet-Draft HTTP State Management Mechanism November 2009
4. Remove any leading or trailing space from the name string and the
value string.
5. The cookie-name is the name string, and the cookie-value is the
value string.
The user agent MUST use the following algorithm to parse the
unparsed-attributes:
1. If the unparsed-attributes string is empty, skip the rest of
these steps.
2. Consume the first character of the unparsed-attributes (which
will be a U+3B (";") character).
3. If the remaining unparsed-attributes contains a U+3B (";")
character:
Consume the characters of the unparsed-attributes up to, but
not including, the first U+3B (";") character.
Otherwise:
Consume the remainder of the unparsed-attributes.
The characters consumed in this step comprise the attribute-
value-pair string.
4. If the attribute-value-pair string contains a U+3D ("=")
character:
the (possibly empty) name string is the characters up to, but
not including, the first U+3D ("=") character, and the
(possibly empty) value string is the characters after the
first U+3D ("=") character .
Otherwise:
the name string is the entire attribute-value-pair string, and
the value string is empty. (Note that this step differs from
the analogous step when parsing the name-value-pair string.)
5. Remove any leading or trailing space from the name string and the
value string.
6. If the name is a ASCII case-insensitive match for an entry in the
following table, process the value string as instructed.
Barth Expires May 15, 2010 [Page 13]
Internet-Draft HTTP State Management Mechanism November 2009
Attribute | Instruction
------------+---------------------
Max-Age | See Section [TODO]
Expires | See Section [TODO]
Domain | See Section [TODO]
Path | See Section [TODO]
Secure | See Section [TODO]
HttpOnly | See Section [TODO]
7. Return to Step 1.
[TODO: Can parsing a cookie ever fail? Doesn't look like it! Well,
unless you count "Set-Cookie: " as a fail...]
When the user agent finishes parsing the set-cookie-string header,
the user agent *receives a cookie* from the origin server with name
cookie-name, value cookie-value, and attributes cookie-attribute-
list.
5.1.1. The Max-Age Attribute
When the user agent receives a cookie attribute with a name string
that case-insensitively matches the string "Max-Age", the user agent
MUST process the value string as follows.
If the first character of the value string is not a DIGIT or a "-"
character, the user agent MUST ignore the attribute.
If the remainder of value string contains a non-DIGIT character, the
user agent MUST ignore the attribute.
Let delta-seconds be the contents of the value string converted to an
integer.
If delta-seconds is less than or equal to 0, then append an attribute
named Expires (note the name conversion) to the cookie-attribute-list
with a value equal to the current date and time.
If delta-seconds is strictly greater than 0, then append an attribute
named Expires (note the name conversion) to the cookie-attribute-list
with a value equal to the current date and time plus delta-seconds
seconds.
5.1.2. The Expires Attribute
Unfortunately, cookie dates are quite complex for historical reasons.
Barth Expires May 15, 2010 [Page 14]
Internet-Draft HTTP State Management Mechanism November 2009
When the user agent receives a cookie attribute with a name string
that case-insensitively matches the string "Expires", the user agent
MUST process the value string as follows.
If the attribute lacks a value or the value is the empty string,
abort these steps.
Using the grammar below, divide the value of the attribute into date-
tokens.
cookie-date = date-token-list
date-token-list = date-token [ delimiter date-token-list ]
delimiter = U+09 / U+20 / U+21 / U+22 / U+23 / U+24 /
U+25 / U+26 / U+27 / U+28 / U+29 / U+2A /
U+2B / U+2C / U+2D / U+2E / U+2F / U+3B /
U+3C / U+3D / U+3E / U+3F / U+40 / U+5B /
U+5C / U+5D / U+5E / U+5F / U+60 / U+7B /
U+7C / U+7D / U+7E
date-token = day-of-month / month / year / time / mystery
day-of-month = 2DIGIT / DIGIT
month = "jan" [mystery] / "feb" [mystery] /
"mar" [mystery] / "apr" [mystery] /
"may" [mystery] / "jun" [mystery] /
"jul" [mystery] / "aug" [mystery] /
"sep" [mystery] / "oct" [mystery] /
"nov" [mystery] / "dec" [mystery]
year = 5DIGIT / 4DIGIT / 3DIGIT / 2DIGIT / DIGIT
time = 2DIGIT ":" 2DIGIT ":" 2DIGIT
mystery = (anything except a delimiter)
Process each data-token sequentially in the order the date-tokens
appear in the attribute value.
If the found-day-of-month flag is not set and the token matches the
day-of-month production, set the found-day-of-month flag and set the
day-of-month-value to the number denoted by the token.
If the found-month flag is not set and the token matches the month
production, set the found-month flag and set the month-value to the
month denoted by the token.
If the found-year flag is not set and the token matches the year
production, set the found-year flag and set the year-value to the
number denoted by the token.
If the found-time flag is not set and the token matches the time
Barth Expires May 15, 2010 [Page 15]
Internet-Draft HTTP State Management Mechanism November 2009
production, set the found-time flag and set the hour-value, minute-
value, and second-value to the numbers denoted by the digits in the
token, respectively.
Abort these steps if
o at least one of the found-day-of-month, found-month, found-year,
or found-time flags is not set,
o the day-of-month-value is less than 1 or greater than 31,
o the year-value is less than 1601 or greater than 30827,
o the hour-value is greater than 23,
o the minute-value is greater than 59, or
o the second-value is greater than 59.
If the year-value is greater than 68 and less than 100, increment the
year-value by 1900.
If the year-value is greater than or equal to 0 and less than 69,
increment the year-value by 2000.
Let the expiry-time be the date whose day-of-month, month, year,
hour, minute, and second (in GMT) are the day-of-month-value, the
month-value, the year-value, the hour-value, the minute-value, and
the second-value, respectively.
Append an attribute named Expires to the cookie-attribute-list with a
value equal to expiry-time.
5.1.3. The Domain Attribute
[TODO]
5.1.4. The Path Attribute
The user agent MUST use the following algorithm to compute the
default-path of a cookie:
1. Let uri-path be the path portion of the URI from which the user
agent received the cookie. [TODO: Define this more precisely.]
2. If the first character of the uri-path is not a "/" character,
output "/" and skip the remaining steps.
Barth Expires May 15, 2010 [Page 16]
Internet-Draft HTTP State Management Mechanism November 2009
3. If the uri-path contains only a single "/" character, output "/"
and skip the remaining steps.
4. Output the characters of the uri-path from the first character up
to, and but not including, the right-most "/".
A request-path path-matches a cookie-path if the cookie-path is a
prefix of the request-path and at least one of the following
conditions hold:
o The last character of the cookie-path is "/".
o The first character of the request-path that is not included in
the cookie-path is a "/" character.
When the user agent receives a cookie attribute with a name string
that case-insensitively matches the string "Path", the user agent
MUST process the value string as follows:
o If the value string is empty, then append an attribute named Path
to the cookie-attribute-list with a value equal to default-path of
the cookie.
o If the value string is non-empty and the first character is "/",
then append an attribute named Path to the cookie-attribute-list
with a value equal to value string.
o Otherwise, ignore the attribute.
[TODO: Test \ ? ; # $ % etc]
5.1.5. The Secure Attribute
When the user agent receives a cookie attribute with a name string
that case-insensitively matches the string "Secure", the user agent
MUST append an attribute named Secure to the cookie-attribute-list
with an empty value regardless of the value string.
5.1.6. The HttpOnly Attribute
When the user agent receives a cookie attribute with a name string
that case-insensitively matches the string "HttpOnly", the user agent
MUST append an attribute named HttpOnly to the cookie-attribute-list
with an empty value regardless of the value string.
Barth Expires May 15, 2010 [Page 17]
Internet-Draft HTTP State Management Mechanism November 2009
5.2. Storage Model
When the user agent receives a cookie, the user agent SHOULD record
the cookie in its cookie store as follows.
A user agent MAY ignore received cookies in their entirety if the
user agent is configured to block receiving cookie for a particular
response. For example, the user agent might wish to block receiving
cookies from "third-party" responses.
The user agent stores the following fields about each cookie:
o name (a sequence of bytes)
o value (a sequence of bytes)
o expiry (a date)
o domain (a cookie-domain)
o path (a sequence of bytes)
o creation (a date)
o last-access (a date)
o persistent (a Boolean)
o host-only (a Boolean)
o secure-only (a Boolean)
o http-only (a Boolean)
When the user agent receives a cookie, the user agent MUST follow the
following algorithm:
1. Create a new cookie based on the parsed Set-Cookie header:
1. Create a new cookie with the following default field values:
+ name = the cookie-name
+ value = the cookie-value
+ expiry = the latest representable date
Barth Expires May 15, 2010 [Page 18]
Internet-Draft HTTP State Management Mechanism November 2009
+ domain = the request-host
+ path = the cookie's default-path
+ last-access = the date and time the cookie was received
+ persistent = false
+ host-only = true
+ secure-only = false
+ http-only = false
2. Update the default field values according to the cookie-
attributes:
expiry If the cookie-attributes contains at least one valid
Expires attribute, store the expiry-value of the last such
attribute in the expiry field. Store the value true in
the persistent field. [TODO: Test that this really works
when mixing Max-Age and Expires.]
domain If the cookie-attributes contains at least one Domain
attribute, store the value of the last such attribute in
the domain field. Store the value false in the host-only
field. [TODO: Reject cookies for unrelated domains.]
[TODO: If the URL's host is an IP address, let Domain to
be an IP address if it matches the URL's host exactly, but
set the host-only flag. ]
path If the cookie-attributes contains at least one Path
attribute, store the value of the last such attribute in
the path field.
secure-only If the cookie-attributes contains at least one
Secure attribute, store the value true in the secure-only
field.
http-only If the cookie-attributes contains at least one
HttpOnly attribute, store the value true in the http-only
field.
2. Remove from the cookie store all cookies that have the share the
same name, domain, path, and host-only fields as the newly
created cookie. [TODO: Validate this list!] [TODO: There's some
funny business around http-only here.]
Barth Expires May 15, 2010 [Page 19]
Internet-Draft HTTP State Management Mechanism November 2009
3. Insert the newly created cookie into the cookie store.
The user agent MUST evict a cookie from the cookie store if A cookie
exists in the cookie store with an expiry date in the past.
The user agent MAY evict a cookie from the cookie store if the number
of cookies sharing a domain field exceeds some predetermined upper
bound (such as 50 cookies). [TODO: Explain where 50 comes from.]
The user agent MAY evict cookies from the cookie store if the cookie
store exceeds some maximum storage bound (such as 3000 cookies).
[TODO: Explain where 3000 comes from.]
When the user agent evicts cookies from the cookie store, the user
agent MUST evict cookies in the following priority order:
1. Cookies with an expiry date in the past.
2. Cookies that share a domain field more than a predetermined
number of other cookies.
3. All other cookies.
If two cookies have the same removal priority, the user agent MUST
evict the cookie with the least recent last-access date first.
When "the current session is over", the user agent MUST remove from
the cookie store all cookies with the persistent field set to false.
NOTE: This document does not define when "the current session is
over." Many user agents remove non-persistent cookies when they
exit. However, other user agent expire non-persistent cookies
using other heuristics.
5.3. The Cookie Header
When the user agent generates an HTTP request for a particular URI,
the user agent SHOULD attach exactly one HTTP header named Cookie if
the cookie-string (defined below) for that URI is non-empty.
A user agent MAY elide the Cookie header in its entirety if the user
agent is configured to block sending cookie for a particular request.
For example, the user agent might wish to block sending cookies
during "third-party" requests.
The user agent MUST use the following algorithm to compute the
cookie-string from a cookie store and from a URI:
Barth Expires May 15, 2010 [Page 20]
Internet-Draft HTTP State Management Mechanism November 2009
1. Let cookie-list be the set of cookies from the cookie store that
meet the following requirements:
* The cookie's domain field must domain-match the URI's host.
[TODO: Spec me]
* The cookie's path field must path-match the URI's path.
* If the cookie's host-only flag is set, the cookie's domain
field must denote exactly the same FQDN as the URI's host.
[TODO: Internet Explorer does not implement this requirement
but most other major implementations do.]
* If the cookie's secure-only field is true, then the URI's
scheme must denote a "secure" protocol.
NOTE: The notion of an "secure" protocol is not defined by
this document. Typically, user agents consider a protocol
secure if the protocol makes use of transport-layer
security, such as TLS. For example, most user agents
consider "https" to be a scheme that denotes a secure
protocol.
* If the cookie's http-only field is true, then include the
cookie unless the cookie-string is begin generated for a "non-
HTTP" API. (Note that this document does not define which
APIs are "non-HTTP".)
NOTE: The Cookie header will not contain any expired cookies
because cookies past their expiry date are removed from the
cookie store immediately.
2. Sort the cookie-list in the following order:
* Cookies with longer path fields are listed before cookies with
shorter path field.
* Among cookies that have equal length path fields, cookies with
earlier creation dates are listed before cookies with later
creation dates.
3. Update the last-access field of each cookie in the cookie-list to
the current date.
4. Serialize the cookie-list into a cookie-string by processing each
cookie in the cookie-list in order:
Barth Expires May 15, 2010 [Page 21]
Internet-Draft HTTP State Management Mechanism November 2009
1. If the cookie's name field is non-empty, output the cookie's
name field followed by the character U+3D ("=").
2. Output the cookie's value field.
3. If there is an unprocessed cookie in the cookie-list, output
the characters U+3B and U+20 ("; ")
Barth Expires May 15, 2010 [Page 22]
Internet-Draft HTTP State Management Mechanism November 2009
6. Implementation Considerations
6.1. Set-Cookie Content
An origin server's content should probably be divided into disjoint
application areas, some of which require the use of state
information. The application areas can be distinguished by their
request URLs. The Set-Cookie header can incorporate information
about the application areas by setting the Path attribute for each
one.
The session information can obviously be clear or encoded text that
describes state. However, if it grows too large, it can become
unwieldy. Therefore, an implementor might choose for the session
information to be a key to a server-side resource. [TODO: Describe
briefly how to generate a decent session key.]
[TODO: We could recommend that servers encrypt and mac their cookie
data.]
[TODO: Mention issues that arise from having multiple concurrent
sessions.]
6.2. Implementation Limits
Practical user agent implementations have limits on the number and
size of cookies that they can store. General-use user agents SHOULD
provide each of the following minimum capabilities:
o At least 4096 bytes per cookie (as measured by the size of the
characters that comprise the cookie non-terminal in the syntax
description of the Set-Cookie header). [TODO: Validate]
o At least 50 cookies per domain. [TODO: History lesson]
o At least 3000 cookies total.
The information in a Set-Cookie response header must be retained in
its entirety. If for some reason there is inadequate space to store
the cookie, the cookie must be discarded, not truncated.
Applications should use as few and as small cookies as possible, and
they should cope gracefully with the loss of a cookie. [TODO: Could
mention latency issues that arise from having tons of cookies.]
Barth Expires May 15, 2010 [Page 23]
Internet-Draft HTTP State Management Mechanism November 2009
7. Security Considerations
7.1. Clear Text
The information in the Set-Cookie and Cookie headers is transmitted
in the clear. Three consequences are:
1. Any sensitive information that is conveyed in in the headers is
exposed to an eavesdropper.
2. A malicious intermediary could alter the headers as they travel
in either direction, with unpredictable results.
3. A malicious client could alter the Cookie header before
transmission, with unpredictable results.
These facts imply that information of a personal and/or financial
nature should be sent over a secure channel. For less sensitive
information, or when the content of the header is a database key, an
origin server should be vigilant to prevent a bad Cookie value from
causing failures.
7.2. Weak Isolation
[TODO: Weak isolation by port.]
[TODO: Weak isolation by scheme (e.g., ftp, gopher, etc).]
7.3. Cookie Spoofing
[TODO: Mention integrity issue where a sibling domain can inject
cookies.]
[TODO: Mention integrity issue where a HTTP can inject cookies into
HTTPS.]
Barth Expires May 15, 2010 [Page 24]
Internet-Draft HTTP State Management Mechanism November 2009
8. Other, Similar, Proposals
[TODO: Describe relation to the Netscape Cookie Spec, RFC 2109, RFC
2629, and cookie-v2.]
Barth Expires May 15, 2010 [Page 25]
Internet-Draft HTTP State Management Mechanism November 2009
Appendix A. Acknowledgements
This document borrows heavily from RFC 2109. [TODO: Figure out the
proper way to credit the authors of RFC 2109.]
Barth Expires May 15, 2010 [Page 26]
Internet-Draft HTTP State Management Mechanism November 2009
Appendix B. Tabled Items
Tabled items:
o Public suffix.
Barth Expires May 15, 2010 [Page 27]
Internet-Draft HTTP State Management Mechanism November 2009
Author's Address
Adam Barth
University of California, Berkeley
Email: abarth@eecs.berkeley.edu
URI: http://www.adambarth.com/
Barth Expires May 15, 2010 [Page 28]