INTERNET-DRAFT Ken A L Coar draft-coar-cgi-v11-00.{html,txt} The Apache Group D.R.T. Robinson ESI 28 May, 1998 The WWW Common Gateway Interface Version 1.1 Status of this Memo This document is an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." To view the entire list of current Internet-Drafts, please check the "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast). Abstract The Common Gateway Interface (CGI) is a simple interface for running external programs, software or gateways under an information server in a platform-independent manner. Currently, the supported information servers are HTTP servers. The interface has been in use by the World-Wide Web since 1993. This specification defines the 'current practice' parameters of the 'CGI/1.1' interface developed and documented at the U.S. National Centre for Supercomputing Applications [NCSA-CGI]. This document also defines the use of the CGI/1.1 interface on the Unix and AmigaDOS(tm) systems. Discussion of this draft occurs on the CGI-WG mailing list; see the project Web page at <URL:http://Web.Golux.Com/coar/cgi/> for details on the mailing list and the status of the project. Table of Contents 1 Introduction................................................2 1.1 Purpose..................................................2 1.2 Requirements.............................................3 1.3 Specifications...........................................3 1.4 Terminology..............................................4 2 Notational Conventions and Generic Grammar..................4 Coar, et al. INTERNET-DRAFT [Page 1]
CGI/1.1 Expires: 29 November, 1998 2.1 Augmented BNF............................................4 2.2 Basic Rules..............................................5 3 Protocol Parameters.........................................5 3.1 URL Encoding.............................................5 3.2 The Script URI...........................................6 4 Request Metadata (Meta-Variables)...........................6 4.1 AUTH_TYPE................................................7 4.2 CONTENT_LENGTH...........................................7 4.3 CONTENT_TYPE.............................................7 4.4 GATEWAY_INTERFACE........................................8 4.5 HTTP_*...................................................8 4.6 PATH_INFO................................................9 4.7 PATH_TRANSLATED..........................................9 4.8 QUERY_STRING............................................10 4.9 REMOTE_ADDR.............................................10 4.10 REMOTE_HOST............................................10 4.11 REMOTE_IDENT...........................................10 4.12 REMOTE_USER............................................11 4.13 REQUEST_METHOD.........................................11 4.14 SCRIPT_NAME............................................11 4.15 SERVER_NAME............................................11 4.16 SERVER_PORT............................................12 4.17 SERVER_PROTOCOL........................................12 4.18 SERVER_SOFTWARE........................................12 5 Invoking the Script........................................12 6 The CGI Script Command Line................................12 7 Data Input to the CGI Script...............................13 8 Data Output from the CGI Script............................13 8.1 Non-Parsed Header Output................................13 8.2 Parsed Header Output....................................14 9 Requirements for Servers...................................16 10 Recommendations for Scripts...............................17 11 System Specifications.....................................17 11.1 AmigaDOS...............................................17 11.2 Unix...................................................17 12 Security Considerations...................................18 12.1 Safe Methods...........................................18 12.2 HTTP Header Fields Containing Sensitive Information....18 12.3 Script Interference with the Server....................18 13 Acknowledgments...........................................19 14 References................................................19 15 Authors' Addresses........................................20 1. Introduction 1.1. Purpose Together the HTTP [3],[8] server and the CGI script are responsible for servicing a client request by sending back responses. The client request comprises a Universal Resource Identifier (URI) [1], a request method and various ancillary information about the request provided by the transport mechanism. Coar, et al. INTERNET-DRAFT [Page 2]
CGI/1.1 Expires: 29 November, 1998 The CGI defines the abstract parameters, known as meta-variables, which describe the client's request. Together with a concrete programmer interface this specifies a platform-independent interface between the script and the HTTP server. 1.2. Requirements This specification uses the same words as RFC 1123 [5] to define the significance of each particular requirement. These are: MUST This word or the adjective 'required' means that the item is an absolute requirement of the specification. SHOULD This word or the adjective 'recommended' means that there may exist valid reasons in particular circumstances to ignore this item, but the full implications should be understood and the case carefully weighed before choosing a different course. MAY This word or the adjective 'optional' means that this item is truly optional. One vendor may choose to include the item because a particular marketplace requires it or because it enhances the product, for example; another vendor may omit the same item. An implementation is not compliant if it fails to satisfy one or more of the 'must' requirements for the protocols it implements. An implementation that satisfies all of the 'must' and all of the 'should' requirements for its features is said to be 'unconditionally compliant'; one that satisfies all of the 'must' requirements but not all of the 'should' requirements for its features is said to be 'conditionally compliant'. 1.3. Specifications Not all of the functions and features of the CGI are defined in the main part of this specification. The following phrases are used to describe the features which are not specified: system defined The feature may differ between systems, but must be the same for different implementations using the same system. A system will usually identify a class of operating-systems. Some systems are defined in section 12 of this document. New systems may be defined by new specifications without revision of this document. implementation defined The behaviour of the feature may vary from implementation to implementation, but a particular implementation must document its behaviour. Coar, et al. INTERNET-DRAFT [Page 3]
CGI/1.1 Expires: 29 November, 1998 1.4. Terminology This specification uses many terms defined in the HTTP/1.1 specification [8]; however, the following terms are used here in a sense which may not accord with their definitions in that document, or with their common meaning. meta-variable A named parameter that carries information from the server to the script. It is not necessarily a variable in the operating-system's environment, although that is the most common implementation. script The software which is invoked by the server via this interface. It need not be a standalone program, but could be a dynamically-loaded or shared library, or even a subroutine in the server. server The application program which invokes the script in order to service requests. 2. Notational Conventions and Generic Grammar 2.1. Augmented BNF All of the mechanisms specified in this document are described in both prose and an augmented Backus-Naur Form (BNF) similar to that used by RFC 822 [6]. This augmented BNF contains the following constructs: name = definition the definition by the equal character ("="). Whitespace is only significant in that continuation lines of a definition are indented. "literal" Quotation marks (") surround literal text, except for a literal quotation mark, which is surrounded by angle-brackets ("<" and ">"). Unless stated otherwise, the text is case-sensitive. rule1 | rule2 Alternative rules are separated by a vertical bar ("|"). (rule1 rule2 rule3) Elements enclosed in parentheses are treated as a single element. *rule A rule preceded by an asterisk ("*") may have zero or more occurrences. A rule preceded by an integer followed by an asterisk must occur at least the specified number of times. Coar, et al. INTERNET-DRAFT [Page 4]
CGI/1.1 Expires: 29 November, 1998 [rule] A element enclosed in square brackets ("[" and "]") is optional. 2.2. Basic Rules The following rules are used throughout this specification to describe basic parsing constructs. alpha = lowalpha | hialpha lowalpha = "a" | "b" | "c" | "d" | "e" | "f" | "g" | "h" | "i" | "j" | "k" | "l" | "m" | "n" | "o" | "p" | "q" | "r" | "s" | "t" | "u" | "v" | "w" | "x" | "y" | "z" hialpha = "A" | "B" | "C" | "D" | "E" | "F" | "G" | "H" | "I" | "J" | "K" | "L" | "M" | "N" | "O" | "P" | "Q" | "R" | "S" | "T" | "U" | "V" | "W" | "X" | "Y" | "Z" digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" OCTET = <any 8-bit byte> CHAR = <any character> CTL = <any control character> SP = <space character> HT = <horizontal tab character> NL = <newline> LWSP = SP | HT | NL tspecial = "(" | ")" | "@" | "," | ";" | ":" | "\" | <"> | "/" | "[" | "]" | "?" | "<" | ">" | "{" | "}" | SP | HT token = 1*<any CHAR except CTLs or tspecials> quoted-string = ( <"> *qdtext <"> ) | ( "<" *qatext ">") qdtext = <any CHAR except <"> and CTLs but including LWSP> qatext = <any CHAR except "<", ">" and CTLs but including LWSP> Note that newline (NL) need not be a single character, but can be a character sequence. 3. Protocol Parameters 3.1. URL Encoding Some variables and constructs used here are described as being 'URL-encoded'. This encoding is described in section 2.2 of RFC 1738 [4]. In a URL encoded string an escape sequence consists of a percent character ("%") followed by two hexadecimal digits, where the two hexadecimal digits form an octet. An escape sequence represents the graphic character which has the octet as its code within the US-ASCII [12] coded character set, if it exists. If no such graphic character exists, then the escape sequence represents the octet value itself. Coar, et al. INTERNET-DRAFT [Page 5]
CGI/1.1 Expires: 29 November, 1998 An alternate "shortcut" encoding for representing the space character exists and is in common use. Scripts MUST be prepared to recognise both '+' and '%20' as an encoded space in a URL. Note that some unsafe characters may have different semantics if they are encoded. The definition of which characters are unsafe depends on the context. See section 2.2 of RFC 1738 [4] for authoritative treatment of this issue. 3.2. The Script URI The 'Script-URI' is defined as the URI of the resource identified by the meta-variables. Often, this URI will be the same as the URI requested by the client (the 'Client-URI'); however, it need not be. Instead, it could be a URI invented by the server, and so it can only be used in the context of the server and its CGI interface. The Script-URI has the syntax of generic-RL as defined in section 2.1 of RFC 1808 [7], with the exception that object parameters and fragment identifiers are not permitted: <scheme>://<host><port>/<path>?<query> The various components of the script URI are defined by some of the meta-variables (see below); script-uri = protocol "://" SERVER_NAME ":" SERVER_PORT enc-script enc-path-info "?" QUERY_STRING where 'protocol' is found from SERVER_PROTOCOL, 'enc-script' is a URL-encoded version of SCRIPT_NAME and 'enc-path-info' is a URL-encoded version of PATH_INFO. Note that the scheme and the protocol are not identical; for instance, a resource accessed via an SSL mechanism may have a Client-URI with a scheme of "https" rather than "http". There is no way in CGI/1.1 for the script to reconstruct this, and therefore the Script-URI includes the base protocol used. 4. Request Metadata (Meta-Variables) Each CGI implementation MUST define a mechanism to pass data about the request from the server to the script. The meta-variables containing these data are accessed by the script in a system defined manner. In all cases, a missing meta-variable is equivalent to a zero-length (NULL) value, and vice versa. The representation of the characters in the meta-variables is system defined. Case is not significant in the meta-variable names, in that there cannot be two different variables whose names differ in case only. Here they are shown using a canonical representation of capitals plus underscore ("_"). The actual representation of the names is system Coar, et al. INTERNET-DRAFT [Page 6]
CGI/1.1 Expires: 29 November, 1998 defined; for a particular system the representation MAY be defined differently than this. The variables are: AUTH_TYPE CONTENT_LENGTH CONTENT_TYPE GATEWAY_INTERFACE HTTP_* PATH_INFO PATH_TRANSLATED QUERY_STRING REMOTE_ADDR REMOTE_HOST REMOTE_IDENT REMOTE_USER REQUEST_METHOD SCRIPT_NAME SERVER_NAME SERVER_PORT SERVER_PROTOCOL SERVER_SOFTWARE 4.1. AUTH_TYPE This variable is specific to requests made with HTTP. If the script URI would require access authentication for external access, then this variable is found from the 'auth-scheme' token in the request, otherwise NULL. AUTH_TYPE = "" | auth-scheme auth-scheme = "Basic" | token HTTP access authentication schemes are described in section 11 of the HTTP/1.1 specification [8]. The auth-scheme is not case-sensitive. 4.2. CONTENT_LENGTH The size of the entity attached to the request, if any, in decimal number of octets. If no data are attached, then NULL. The syntax is the same as the HTTP Content-Length header field (section 14.14, HTTP/1.1 specification [8]). CONTENT_LENGTH = "" | 1*digit 4.3. CONTENT_TYPE The Internet Media Type [9] of the attached entity. The syntax is the same as the HTTP Content-Type header field. Coar, et al. INTERNET-DRAFT [Page 7]
CGI/1.1 Expires: 29 November, 1998 CONTENT_TYPE = "" | media-type media-type = type "/" subtype *( ";" parameter) type = token subtype = token parameter = attribute "=" value attribute = token value = token | quoted-string The type, subtype and parameter attribute names are not case-sensitive. Parameter values MAY be case sensitive. Media types and their use in HTTP are described section 3.7 of the HTTP/1.1 specification [8]. Example: application/x-www-form-urlencoded There is no default value for this variable. If and only if it is unset, then the script MAY attempt to determine the media type from the data received. If the type remains unknown, then the script MAY choose to either assume a content-type of application/octet-stream or reject the request with either a 406 ("Not Acceptable") or 415 ("Unsupported Media Type") error. 4.4. GATEWAY_INTERFACE The version of the CGI specification to which this server complies. Syntax: GATEWAY_INTERFACE = "CGI" "/" 1*digit "." 1*digit Note that the major and minor numbers are treated as separate integers and hence each may be incremented higher than a single digit. Thus CGI/2.4 is a lower version than CGI/2.13 which in turn is lower than CGI/12.3. Leading zeros MUST be ignored by scripts and SHOULD NOT be generated by servers. This document defines the 1.1 version of the CGI interface. 4.5. HTTP_* These variables are specific to requests made with HTTP. Interpretation of these variables depends on the value of SERVER_PROTOCOL. Meta-variables with names beginning with "HTTP_" contain header data read from the client, if the protocol used was HTTP. The HTTP header field name is converted to upper case, has all occurrences of "-" replaced with "_" and has "HTTP_" prepended to give the meta-variable name. The header data MAY be presented as sent by the client, or MAY be rewritten in ways which do not change its semantics. If multiple header fields with the same field-name are received then they MUST be Coar, et al. INTERNET-DRAFT [Page 8]
CGI/1.1 Expires: 29 November, 1998 rewritten as a single header field having the same semantics before being represented in a meta-variable. Similarly, a header field that is received on more than one line MUST be merged into a single line. The server MUST, if necessary, change the representation of the data (for example, the character set) to be appropriate for a CGI meta-variable. The server is not required to create meta-variables for all the header fields that it receives. In particular, it MAY remove any header fields carrying authentication information, such as "Authorization"; and it MAY remove header fields whose value is available to the script via other variables, such as "Content-Length" and "Content-Type". 4.6. PATH_INFO A path to be interpreted by the CGI script. It identifies the source or sub-resource to be returned by the CGI script. The syntax and semantics are similar to a decoded HTTP URL 'hpath' token (defined in RFC 1738 [4]), with the exception that a PATH_INFO of "/" represents a single void path segment. PATH_INFO = "" | ( "/" path ) path = segment *( "/" segment ) segment = *pchar pchar = <any CHAR except "/"> The PATH_INFO string is the trailing part of the <path> component of the script URI that follows the SCRIPT_NAME part of the path. 4.7. PATH_TRANSLATED The OS path to the file that the server would attempt to access were the client to request the absolute URL containing the path PATH_INFO. I.e., for a request of protocol "://" SERVER_NAME ":" SERVER_PORT enc-path-info where 'enc-path-info' is a URL-encoded version of PATH_INFO. If PATH_INFO is NULL then PATH_TRANSLATED is set to NULL. PATH_TRANSLATED = *CHAR PATH_TRANSLATED need not be supported by the server. The server may choose to set PATH_TRANSLATED to NULL for reasons of security, or because the path would not be interpretable by a CGI script; such as the object it represented was internal to the server and not visible in the file-system; or for any other reason. The algorithm the server uses to derive PATH_TRANSLATED is obviously implementation defined; CGI scripts which use this variable may Coar, et al. INTERNET-DRAFT [Page 9]
CGI/1.1 Expires: 29 November, 1998 suffer limited portability. 4.8. QUERY_STRING A URL-encoded search string; the <query> part of the script URI. QUERY_STRING = query-string query-string = *qchar qchar = unreserved | escape | reserved unreserved = alpha | digit | safe | extra reserved = ";" | "/" | "?" | ":" | "@" | "&" | "=" safe = "$" | "-" | "_" | "." | "+" extra = "!" | "*" | "'" | "(" | ")" | "," escape = "%" hex hex hex = digit | "A" | "B" | "C" | "D" | "E" | "F" | "a" | "b" | "c" | "d" | "e" | "f" The URL syntax for a search string is described in RFC 1738 [4]. 4.9. REMOTE_ADDR The IP address of the agent sending the request to the server. This is not necessarily that of the client. REMOTE_ADDR = hostnumber hostnumber = digits "." digits "." digits "." digits digits = 1*digit 4.10. REMOTE_HOST The fully qualified domain name of the agent sending the request to the server, if available, otherwise NULL. Not necessarily that of the client. Fully qualified domain names take the form as described in section 3.5 of RFC 1034 [10] and section 2.1 of RFC 1123 [5]; a sequence of domain labels separated by ".", each domain label starting and ending with an alphanumerical character and possibly also containing "-" characters. The rightmost domain label will never start with a digit. Domain names are not case sensitive. REMOTE_HOST = "" | hostname hostname = *( domainlabel ".") toplabel domainlabel = alphadigit [ *alphahypdigit alphadigit ] toplabel = alpha [ *alphahypdigit alphadigit ] alphahypdigit = alphadigit | "-" alphadigit = alpha | digit 4.11. REMOTE_IDENT The identity information reported about the connection by a RFC 1413 [11] request to the remote agent, if available. The server MAY choose not to support this feature, or not to request the data for Coar, et al. INTERNET-DRAFT [Page 10]
CGI/1.1 Expires: 29 November, 1998 efficiency reasons. REMOTE_IDENT = *CHAR The data returned are not appropriate for use as authentication information. 4.12. REMOTE_USER This variable is specific to requests made with HTTP. If AUTH_TYPE is "Basic", then the user-ID sent by the client. If AUTH_TYPE is NULL, then NULL, otherwise undefined. REMOTE_USER = "" | userid | *OCTET userid = token 4.13. REQUEST_METHOD This variable is specific to requests made with HTTP. The method with which the request was made, as described in section 5.1.1 of the HTTP/1.0 specification [3] and section 5.1.1 of the HTTP/1.1 specification [8]. REQUEST_METHOD = http-method http-method = "GET" | "HEAD" | "POST" | "PUT" | "DELETE" | extension-method extension-method = token The method is case sensitive. Note that of the new methods defined by the HTTP/1.1 specification [8], OPTIONS and TRACE are not appropriate for the CGI/1.1 environment. 4.14. SCRIPT_NAME A URL path that could identify the CGI script (rather than the particular CGI output). The syntax and semantics are identical to a decoded HTTP URL 'hpath' token [4]. SCRIPT_NAME = "" | ( "/" [ path ] ) The leading "/" is not part of the path. It is optional if the path is NULL. The SCRIPT_NAME string is some leading part of the <path> component of the script URI derived in some implementation defined manner. 4.15. SERVER_NAME Coar, et al. INTERNET-DRAFT [Page 11]
CGI/1.1 Expires: 29 November, 1998 The name for this server, as used in the <host> part of the script URI. Thus either a fully qualified domain name, or an IP address. SERVER_NAME = hostname | hostnumber 4.16. SERVER_PORT The port on which this request was received, as used in the <port> part of the script URI. SERVER_PORT = 1*digit 4.17. SERVER_PROTOCOL The name and revision of the information protocol with which this request arrived. This is not necessarily the same as the protocol version used by the server in its response. SERVER_PROTOCOL = HTTP-Version | extension-version HTTP-Version = "HTTP" "/" 1*digit "." 1*digit extension-version = protocol "/" 1*digit "." 1*digit protocol = 1*( alpha | digit | "+" | "-" | "." ) 'protocol' is a version of the <scheme> part of the script URI, but is not identical to it. For example, the scheme of a request may be "https" while the protocol remains "http". The protocol is not case sensitive. By convention, 'protocol' is in upper case. 4.18. SERVER_SOFTWARE The name and version of the information server software answering the request (and running the gateway). SERVER_SOFTWARE = *CHAR 5. Invoking the Script This script is invoked in a system defined manner. Unless specified otherwise, this will be by treating the file containing the script as an executable program, and running it as a child process of the server. 6. The CGI Script Command Line Some systems support a method for supplying an array of strings to the CGI script. This is only used in the case of an 'indexed' query. This is identified by a "GET" or "HEAD" HTTP request with a URL search string not containing any unencoded "=" characters. For such a request, the server SHOULD parse the search string into words, using the rules: Coar, et al. INTERNET-DRAFT [Page 12]
CGI/1.1 Expires: 29 November, 1998 search-string = search-word *( "+" search-word ) search-word = 1*schar schar = xunreserved | escape | xreserved xunreserved = alpha | digit | xsafe | extra xsafe = "$" | "-" | "_" | "." xreserved = ";" | "/" | "?" | ":" | "@" | "&" After parsing, each word is URL-decoded, optionally encoded in a system defined manner and then the argument list is set to the list of words. If the server cannot create any part of the argument list, then the server SHOULD NOT generate any command line information. For example, the number of arguments may be greater than operating system or server limitations permit, or one of the words may not be representable as an argument. 7. Data Input to the CGI Script As there may be a data entity attached to the request, there MUST be a system defined method for the script to read these data. Unless defined otherwise, this will be via the 'standard input' file descriptor. There MUST be at least CONTENT_LENGTH bytes available for the script to read if CONTENT_LENGTH is not NULL. The script is not obliged to read the data, but it MUST NOT attempt to read more than CONTENT_LENGTH bytes, even if more data are available. For non-parsed header (NPH) scripts (see below), the server SHOULD attempt to ensure that the script input comes directly from the client, with minimal buffering. For all scripts the data will be as supplied by the client. 8. Data Output from the CGI Script There MUST be a system defined method for the script to send data back to the server or client; a script MUST always return some data. Unless defined otherwise, this will be via the 'standard output' file descriptor. There are two forms of output that the script can give; non-parsed header (NPH) output, and parsed header output. A server is only required to support the latter; distinguishing between the two types of output (or scripts) is implementation defined. 8.1. Non-Parsed Header Output The script MUST return a complete HTTP response message, as described in Section 6 of the HTTP specifications [3],[8]. The script MUST use the SERVER_PROTOCOL variable to determine the appropriate format for a response. Coar, et al. INTERNET-DRAFT [Page 13]
CGI/1.1 Expires: 29 November, 1998 The server SHOULD attempt to ensure that the script output is sent directly to the client, with minimal internal and no transport-visible buffering. 8.2. Parsed Header Output The script returns a CGI response message as follows: CGI-Response = *( CGI-Header | HTTP-Header ) NL [ Entity-Body ] CGI-Header = Content-type | Location | Status | extension-header The response comprises a header and a body, separated by a blank line. The header fields are either CGI header fields to be interpreted by the server, or HTTP headers to be included in the response returned to the client if the request method is HTTP. At least one CGI-Header MUST be supplied, but no CGI header field can be repeated with the same field-name. If a body is supplied, then a Content-type header field is required, otherwise the script MUST send a Location or Status header field. If a Location CGI-header field is returned, then the script MUST NOT supply any HTTP-Headers. All header fields occurring in a CGI-Response MUST be specified one per line; CGI/1.1 makes no provision for continuation lines. The CGI header fields have the generic syntax: generic-header = field-name ":" [ field-value ] NL field-name = 1*<any CHAR, excluding CTLs, SP and ":"> field-value = *( field-content | LWSP ) field-content = *( token | tspecial | quoted-string ) The field-name is not case sensitive; a NULL field value is equivalent to the header field not being sent. Content-Type The Internet Media Type [9] of the entity body, which is to be sent unmodified to the client. Content-Type = "Content-Type" ":" media-type NL This is actually an HTTP-Header rather than a CGI-header field, but it is listed here because of its importance in the CGI dialogue as a member of the "one of these is required" set of header fields. Location This is used to specify to the server that the script is Coar, et al. INTERNET-DRAFT [Page 14]
CGI/1.1 Expires: 29 November, 1998 returning a reference to a document rather than an actual document. Location = "Location" ":" ( fragment-URI | rel-URL-abs-path ) NL fragment-URI = URI [ # fragmentid ] URI = scheme ":" *qchar fragmentid = *qchar rel-URL-abs-path = "/" [ hpath ] [ "?" query-string ] hpath = fpsegment *( "/" psegment ) fpsegment = 1*hchar psegment = *hchar hchar = alpha | digit | safe | extra | ":" | "@" | "& | "=" The Location value is either an absolute URI with optional fragment, as defined in RFC 1630 [1], or an absolute path and optional query-string. If an absolute URI is returned by the script, then the server will generate a '302 redirect' HTTP response message, and if no entity body is supplied by the script, then the server will produce one. If the Location value is a path, then the server will generate the response that it would have produced in response to a request containing the URL protocol "://" SERVER_NAME ":" SERVER_PORT rel-URL-abs-path The location header field MUST only be sent if the REQUEST_METHOD is HEAD or GET. Status The Status header field is used to indicate to the server what status code the server MUST use in the response message. It SHOULD NOT be sent if the script returns a Location header field. Status = "Status" ":" digit digit digit SP reason-phrase NL reason-phrase = *<CHAR, excluding CTLs, NL> The valid status codes are listed in section 6.1.1 of the HTTP/1.0 specifications [3]. If the SERVER_PROTOCOL is "HTTP/1.1", then the status codes defined in the HTTP/1.1 specification [8] may be used. If the script does not return a Status header field, then "200 OK" SHOULD be assumed by the server. If a script is being used to handle a particular error or condition encountered by the server, such as a 404 Not Found error, the script SHOULD use the Status CGI header field to propagate the error condition back to the client. E.g., in the example mentioned it SHOULD include a "Status: 404 Not Found" Coar, et al. INTERNET-DRAFT [Page 15]
CGI/1.1 Expires: 29 November, 1998 in the header data returned to the server. HTTP header fields The script MAY return any other header fields defined by the specification for the SERVER_PROTOCOL (HTTP/1.0 [3] or HTTP/1.1 [8]). The server MUST translate the header data from the CGI header field syntax to the HTTP header field syntax if these differ. For example, the character sequence for newline (such as Unix's ASCII NL) used by CGI scripts may not be the same as that used by HTTP (ASCII CR followed by LF). The server MUST also resolve any conflicts between header fields returned by the script and header fields that it would otherwise send itself. 9. Requirements for Servers Servers MUST support the standard mechanism (described below) which allows the script author to determine what URL to use in documents which reference the script. Specifically, what URL to use in order to achieve particular settings of the meta-variables. This mechanism is as follows: The value for SCRIPT_NAME is governed by the server configuration and the location of the script in the OS file-system. Given this, any access to the partial URL SCRIPT_NAME extra-path ? query-information where extra-path is either NULL or begins with a "/" and satisfies any other server requirements, will cause the CGI script to be executed with PATH_INFO set to the decoded extra-path, and QUERY_STRING set to query-information (not decoded). Servers MAY reject with error 404 any requests that would result in an encoded "/" being decoded into PATH_INFO or SCRIPT_NAME, as this might represent a loss of information to the script. Although the server and the CGI script need not be consistent in their handling of URL paths (client URLs and the PATH_INFO data, respectively), server authors may wish to impose consistency. So the server implementation SHOULD define its behaviour for the following cases: 1. define any restrictions on allowed characters, in particular whether ASCII NUL is permitted; 2. define any restrictions on allowed path segments, in particular whether non-terminal NULL segments are permitted; 3. define the behaviour for "." or ".." path segments; i.e., whether they are prohibited, treated as ordinary path segments or interpreted in accordance with the relative URL specification [7]; 4. define any limits of the implementation, including limits on path or search string lengths, and limits on the volume of header data Coar, et al. INTERNET-DRAFT [Page 16]
CGI/1.1 Expires: 29 November, 1998 the server will parse. Servers MAY generate the script URI in any way from the client URI, or from any other data (but the behaviour SHOULD be documented). 10. Recommendations for Scripts Scripts SHOULD reject unexpected methods (such as DELETE, etc.) with error 405 Method Not Allowed. If the script does not intend processing the PATH_INFO data, then it SHOULD reject the request with 404 Not Found if PATH_INFO is not NULL. If the output of a form is being processed, check that CONTENT_TYPE is "application/x-www-form-urlencoded" [2]. If parsing PATH_INFO, PATH_TRANSLATED or SCRIPT_NAME then be careful of void path segments ("//") and special path segments ("." and ".."). They SHOULD either be removed from the path before use in OS system calls, or the request SHOULD be rejected with 404 Not Found. It is very unlikely that any other use could be made of these. As it is impossible for the script to determine the client URI that initiated this request without knowledge of the specific server in use, the script SHOULD NOT return text/html documents containing relative URL links without including a <BASE> tag in the document. When returning header fields, the script SHOULD try to send the CGI header fields as soon as possible, and preferably before any HTTP header fields. This may help reduce the server's memory requirements. 11. System Specifications 11.1. AmigaDOS The implementation of the CGI on an AmigaDOS operating system platform SHOULD use environment variables as the mechanism of providing request metadata to CGI scripts. Environment variables These are accessed by the DOS library routine GetVar. The flags argument SHOULD be 0. Case is ignored, but upper case is recommended for compatibility with case-sensitive systems. The current working directory The current working directory for the script is set to the directory containing the script. Character set The US-ASCII character set is used for the definition of environment variable names and header field names; the newline (NL) sequence is LF; servers SHOULD also accept CR LF as a newline. 11.2. Unix Coar, et al. INTERNET-DRAFT [Page 17]
CGI/1.1 Expires: 29 November, 1998 The implementation of the CGI on a UNIX operating system platform SHOULD use environment variables as the mechanism of providing request metadata to CGI scripts. For Unix compatible operating systems, the following are defined: Environment variables These are accessed by the C library routine getenv. The command line This is accessed using the the argc and argv arguments to main(). The words have any characters which are 'active' in the Bourne shell escaped with a backslash. The current working directory The current working directory for the script SHOULD be set to the directory containing the script. Character set The US-ASCII character set is used for the definition of environment variable names and header field names; the newline (NL) sequence is LF; servers SHOULD also accept CR LF as a newline. 12. Security Considerations 12.1. Safe Methods As discussed in the security considerations of the HTTP specifications [3],[8], the convention has been established that the GET and HEAD methods should be 'safe'; they should cause no side-effects and only have the significance of resource retrieval. 12.2. HTTP Header Fields Containing Sensitive Information Some HTTP header fields may carry sensitive information which the server SHOULD NOT pass on to the script unless explicitly configured to do so. For example, if the server protects the script using the Basic authentication scheme, then the client will send an Authorization header field containing a username and password. If the server, rather than the script, validates this information then the password SHOULD NOT be passed on to the script via the HTTP_AUTHORIZATION meta-variable. 12.3. Script Interference with the Server The most common implementation of CGI invokes the script as a child process using the same user and group as the server process. It SHOULD therefore be ensured that the script cannot interfere with the server process, its configuration, or documents. If the script is executed by calling a function linked in to the server software (either at compile-time or run-time) then precautions Coar, et al. INTERNET-DRAFT [Page 18]
CGI/1.1 Expires: 29 November, 1998 SHOULD be taken to protect the core memory of the server, or to ensure that untrusted code cannot be executed. 13. Acknowledgements This work is based on a draft published in 1997 by David R. Robinson in 1997, which in turn was based on the original CGI interface that arose out of discussions on the www-talk mailing list. In particular, Rob McCool, John Franks, Ari Luotonen, George Phillips and Tony Sanders deserve special recognition for their efforts in defining and implementing the early versions of this interface. This document has also greatly benefited from the comments and suggestions made by Chris Adie, Dave Kristol, Mike Meyer, David Morris, and Harald Alvestrand. 14. References [1] Berners-Lee, T., 'Universal Resource Identifiers in WWW: A Unifying Syntax for the Expression of Names and Addresses of Objects on the Network as used in the World-Wide Web', RFC 1630, CERN, June 1994. [2] Berners-Lee, T. and Connolly, D., 'Hypertext Markup Language - 2.0', RFC 1866, MIT/W3C, November 1995. [3] Berners-Lee, T., Fielding, R. T. and Frystyk, H., 'Hypertext Transfer Protocol -- HTTP/1.0', RFC 1945, MIT/LCS, UC Irvine, May 1996. [4] Berners-Lee, T., Masinter, L. and McCahill, M., Editors, 'Uniform Resource Locators (URL)', RFC 1738, CERN, Xerox Corporation, University of Minnesota, December 1994. [5] Braden, R., Editor, 'Requirements for Internet Hosts -- Application and Support', STD 3, RFC 1123, IETF, October 1989. [6] Crocker, D.H., 'Standard for the Format of ARPA Internet Text Messages', STD 11, RFC 822, University of Delaware, August 1982. [7] Fielding, R., 'Relative Uniform Resource Locators', RFC 1808, UC Irving, June 1995. [8] Fielding, R., Gettys, J., Mogul, J., Frystyk, H. and Berners-Lee, T., 'Hypertext Transfer Protocol -- HTTP/1.1', RFC 2068, UC Irving, DEC, MIT/LCS, January 1997. [9] Freed, N. and Borenstein N., 'Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types', RFC 2046, Innosoft, First Virtual, November 1996. [10] Mockapetris, P., 'Domain Names - Concepts and Facilities', STD Coar, et al. INTERNET-DRAFT [Page 19]
CGI/1.1 Expires: 29 November, 1998 13, RFC 1034, ISI, November 1987. [11] St. Johns, M., 'Identification Protocol', RFC 1431, US Department of Defense, February 1993. [12] 'Coded Character Set -- 7-bit American Standard Code for Information Interchange', ANSI X3.4-1986. 15. Authors' Addresses Ken A L Coar MeepZor Consulting 26B Bay Ridge Drive Nashua, NH 03062 U.S.A. Tel: +1 (603) 891.2243 Fax: not available Email: Ken.Coar@Golux.Com David Robinson Electronic Share Information Ltd Mount Pleasant House 2 Mount Pleasant Huntingdon Road Cambridge CB3 0RN UK Tel: +44 (1223) 566926 Fax: +44 (1223) 506288 Email: drtr@esi.co.uk Coar, et al. INTERNET-DRAFT [Page 20]