[Search] [pdf|bibtex] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 rfc5728                            
IPDVB Working Group                                           S. Combes
Internet-Draft                                              P. Amundsen
Intended status: Informational                               M. Lambert
Expires: May 3, 2008                                                                             H-P. Lexow
                                                          SatLabs Group
                                                                                                           December 3, 2007


                              The DVB-RCS MIB
                     draft-combes-ipdvb-mib-rcs-02.txt


Status of this Memo

By submitting this Internet-Draft, each author represents that
any applicable patent or other IPR claims of which he or she is
aware have been or will be disclosed, and any of which he or she
becomes aware will be disclosed, in accordance with Section 6 of
BCP 79.

This document may not be modified, and derivative works of it may not
be created, except to publish it as an RFC and to translate it into
languages other than English, or to extract section 3 as-is for
separate use.

Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups.  Note that
other groups may also distribute working documents as Internet-
Drafts.

Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time.  It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."

The list of current Internet-Drafts can be accessed at
        http://www.ietf.org/ietf/1id-abstracts.txt

The list of Internet-Draft Shadow Directories can be accessed at
        http://www.ietf.org/shadow.html

This Internet-Draft will expire on May 3, 2008.

Abstract

   This document describes the MIB module for the Digital Video
   Broadcasting Return Channel via Satellite system (DVB-RCS). It
   defines a set of MIB entities to characterise the behaviour and
   performance of network layer entities deploying DVB-RCS.



Combes                   Expires May 28, 2008                  [Page 1]


Internet-Draft               DVB-RCS MIB                  December 2007




Table of Contents

   1. Introduction...................................................2
   2. Conventions used in this document..............................2
      2.1. Abbreviations.............................................2
      2.2. Glossary..................................................2
         2.2.1. Star DVB-RCS network.................................2
         2.2.2. Mesh DVB-RCS network.................................2
         2.2.3. Transparent DVB-RCS network..........................2
         2.2.4. Regenerative DVB-RCS network.........................2
         2.2.5. DVB-RCS MAC layer....................................2
         2.2.6. DVB-RCS Downlink.....................................2
         2.2.7. DVB-RCS Uplink.......................................2
         2.2.8. IDU..................................................2
         2.2.9. ODU..................................................2
         2.2.10. RCST................................................2
         2.2.11. NCC.................................................2
         2.2.12. Configuration file..................................2
         2.2.13. Logfile.............................................2
         2.2.14. InstallLogfile......................................2
         2.2.15. Antenna alignment...................................2
         2.2.16. CW frequency........................................2
         2.2.17. Request Class.......................................2
         2.2.18. Channel ID..........................................2
         2.2.19. ATM profile.........................................2
         2.2.20. MPEG profile........................................2
         2.2.21. PID pool............................................2
         2.2.22. Capacity Categories.................................2
         2.2.23. Start transponder...................................2
         2.2.24. DVB-S...............................................2
         2.2.25. DVB-S2 and CCM/VCM/ACM..............................2
      2.3. MIB Module................................................2
   3. Definitions....................................................2
   4. Security Considerations........................................2
   5. IANA Considerations............................................2
   6. Acknowledgments................................................2
   7. References.....................................................2
      7.1. Normative References......................................2
      7.2. Informative References....................................2
   8. Authors' Addresses.............................................2
   9. Intellectual Property Statement................................2
   10. Disclaimer of Validity........................................2
   11. Copyright Statement...........................................2




Combes                   Expires May 28, 2008                  [Page 2]


Internet-Draft               DVB-RCS MIB                  December 2007


1. Introduction

   The SatLabs Group [SATLABS] is an international non-profit EEIG
   (European Economic Interest Grouping) committed to large-scale
   adoption and deployment of the Digital Video Broadcasting Return
   Channel via Satellite (DVB-RCS) standard [ETSI-RCS]. SatLabs members
   are service providers, satellite operators, system integrators,
   terminal manufacturers and technology providers with an interest in
   DVB-RCS.

   Since its creation in 2001, the main goal of the SatLabs Group has
   been to achieve interoperability between DVB-RCS terminals and
   systems. Therefore, the Group has defined the SatLabs Qualification
   Program that provides an independent certification process for DVB-
   RCS Terminals based on System Recommendations defined by SatLabs. To
   enhance products interoperability, beyond the physical and MAC layer
   mechanisms defined in the DVB-RCS standard, SatLabs has expanded its
   Recommendations in the field of DVB-RCS terminal management
   [SATLABS]. As a part of this effort, SatLabs has specified a common
   SNMP Management Information Base (MIB) for DVB-RCS terminals, which
   is defined in this document.

   A DVB-RCS terminal is denoted as a Return Channel Satellite Terminal
   (RCST) in the remainder of this document. This consists of an Indoor
   Unit (IDU) and an Outdoor Unit (ODU) connected through an Inter
   Facility Link (IFL), usually a coaxial L-band interface. On the user
   side, the IDU is connected to the user network through a Local Area
   Network (LAN) interface (usually Ethernet). On the network side, the
   ODU is connected via a satellite link (the Air Interface).

   The DVB-RCS MIB is implemented in the IDU of an RCST. RCST
   management can be performed either through the LAN interface (Local
   management) or through the Air Interface (Remote management from the
   Network Control Center, NCC).












Combes                   Expires May 28, 2008                  [Page 3]


Internet-Draft               DVB-RCS MIB                  December 2007


           +------------+
           |  IP        |
           |  End Host  |
           +-----+------+
                    |
     - - - - - - - -|- - - - - - - - - - - - - - - -
    |              | LAN interface                 |
                   |
    |       +------+--------+                      |
            | Indoor Unit   |
    |       |  (IDU)        |                      |
            +------+--------+
    |              |                               |
           Inter Facility Link (IFL)
    |              |                               |
             +-----+--------+
    |       | OutDoor Unit  |                      |
             | (ODU)         |
    |       +------+--------+                      |
                   |
    |              | Air Interface                 |
    - - - - - - -  |- - - - - - - - - - - - - - - -
     RCST         |
                  |        +----------------+
                +------->| Network Control|
                           | Center (NCC)   |
                           +----------------+

                            FIGURE 1: RCST architecture




2. Conventions used in this document

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].




Combes                   Expires May 28, 2008                  [Page 4]


Internet-Draft               DVB-RCS MIB                  December 2007


   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB. MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].



2.1. Abbreviations

   ACM    Adaptive Coding and Modulation (defined in [ETSI-DVBS2])

   ATM    Asynchronous Transfer Mode (cell framing)

   AVBDC  Absolute Volume-Based Dynamic Capacity

   BER    Bit Error Ratio

   BUC    Block Up-Converter

   CCM    Constant Coding and Modulation

   CNR    Carrier to Noise Ratio

   CRA    Continuous Rate Assignment

   CSC    Common Signalling Channel

   CW     Continuous Wave (carrier frequency)

   dBi    deciBel (isotropic)

   dBm    deciBel (with respect to 1 mW)

   DSCP   DiffServ Code Point

   ETSI   European Telecommunications Standards Institute

   IDU    InDoor Unit



Combes                   Expires May 28, 2008                  [Page 5]


Internet-Draft               DVB-RCS MIB                  December 2007


   IFL    Inter-Facility Link

   LNB    Low Noise Block

   LO     Local Oscillator

   MAC    Medium Access Control

   MIB    Management Information Base

   MPEG   Motion Pictures Expert Group (TS Packet framing)

   NCC    Network Control Centre

   OAM    Operations and Management

   ODU    OutDoor Unit

   PHB    Per-Hop Behavior

   PID    Packet IDentifier (MPEG, used as Program Identifier in DVB)

   RBDC   Rate-Based Dynamic Capacity

   RC     Request Class

   RCST   Return Channel via Satellite Terminal (DVB-RCS Terminal)

   Rx     Receive

   SSPA   Solid State Power Amplifier

   TDM    Time Division Multiplex

   TDMA   Time Division Multiple Access

   Tx     Transmit

   VBDC   Volume-Based Dynamic Capacity

   VCI    Virtual Channel Identifier (ATM)

   VPI    Virtual Path Identifier (ATM)

   Vpp    Volts peak-to-peak




Combes                   Expires May 28, 2008                  [Page 6]


Internet-Draft               DVB-RCS MIB                  December 2007


2.2. Glossary

   The terms in this document are derived either from DVB-RCS standard
   specifications [ETSI-RCS] or from SatLabs System Recommendations
   [SATLABS].

2.2.1. Star DVB-RCS network

   This denotes a hub-and-spoke configuration where all communications
   pass through a central hub, that usually also includes the NCC. Peer-
   to-peer communication between RCSTs is possible, but through a double
   satellite hop (this traffic has to pass through the hub).

2.2.2. Mesh DVB-RCS network

   This denotes a mesh configuration that supports peer-to-peer
   communications in a single satellite hop directly between RCSTs.

2.2.3. Transparent DVB-RCS network

   This denotes a network using transparent satellite transponders. Star
   or mesh network configurations can be supported. In the case of a
   mesh configuration, RCSTs need to incorporate a TDMA receiver in
   addition to the TDM receiver.

2.2.4. Regenerative DVB-RCS network

   This denotes a network using regenerative satellite transponders,
   i.e. including some On-Board Processing functionality allowing
   demodulation and decoding of the uplink TDMA signals and re-multiplex
   the traffic on the downlink. Star or mesh network configurations can
   be supported.

2.2.5. DVB-RCS MAC layer

   The DVB-RCS MAC Layer represents the air interface of an RCST, as
   defined in the DVB-RCS standard. The interface supports star and mesh
   networks and is bi-directional.

2.2.6. DVB-RCS Downlink

   The downlink is a DVB-RCS physical link based on TDM. It corresponds
   to the forward link of a DVB-RCS transparent system or the downlink
   of a DVB-RCS regenerative system. It is based on either the DVB-S or
   DVB-S2 standard. In the DVB-RCS context, this interface is bi-
   directional.



Combes                   Expires May 28, 2008                  [Page 7]


Internet-Draft               DVB-RCS MIB                  December 2007


2.2.7. DVB-RCS Uplink

   The DVB-RCS Uplink is based on TDMA. It corresponds to the return or
   mesh link of a RCS transparent system or the uplink of a RCS
   regenerative system. It is based on the DVB-RCS standard.

   In the context of star transparent and mesh regenerative DVB-RCS
   systems, this interface is uni-directional.

   In the context of mesh transparent DVB-RCS systems, this interface is
   bi-directional.

2.2.8. IDU

   This is the indoor part of the RCST (including at least the power
   supply, and usually also the modem and networking functions).

2.2.9. ODU

   This is the outdoor part of the RCST (including at least the aerial,
   and usually also the LNB and BUC).

2.2.10. RCST

   This is the Satellite Terminal, installed on the customer premises.
   It is composed of the IDU and ODU.

2.2.11. NCC

   The NCC provides Control and Monitoring Functions. It generates
   control and timing signals for the operation of the DVB-RCS Network.

2.2.12. Configuration file

   The configuration file is XML formatted file, storing configuration
   parameters for the RCST and their values.

2.2.13. Logfile

   The logfile is stored at the RCST. This is used to log particular
   events that occurr on RCST side.

2.2.14. InstallLogfile

   The Installlogfile is stored at the RCST. This logs particular events
   that occur on RCST side, related to RCST installation phase.



Combes                   Expires May 28, 2008                  [Page 8]


Internet-Draft               DVB-RCS MIB                  December 2007


2.2.15. Antenna alignment

   This is the process to align the RCST antenna, part of the ODU, in
   order to enable bi-directional communication (uplink, downlink) with
   the satellite network.

2.2.16. CW frequency

   The CW frequency is the frequency of a Continuous Wave signal. It is
   a narrowband carrier transmitted for the duration of measurements
   during the installation of a RCST.

2.2.17. Request Class

   A Request Class (RC) is a representation of a Per Hop Behavior (PHB)
   at the MAC layer. It defines a behavior of the MAC layer for a given
   aggregation of traffic. This behavior includes a combination of
   Capacity Categories associated to the RC and a Priority with respect
   to the other RCs supported by a RCST.

2.2.18. Channel ID

   Each Request Class is identified by a unique Channel_ID in the
   communication between the RCST and the NCC.

2.2.19. ATM profile

   The ATM profile is one of the two profiles for traffic burst format
   on a DVB-RCS uplink. It is based on one or more concatenated ATM
   cells, each of length 53 bytes, plus an optional prefix.

2.2.20. MPEG profile

   The MPEG profile is one of the two profiles for traffic burst format
   on the DVB-RCS uplink. It is based on a number of concatenated MPEG2-
   TS packets, each of length 188 bytes.

2.2.21. PID pool

   For the MPEG profile several RCs may be mapped within a pool of
   several PIDs to allow cross-RC Section Packing [RFC4259]. Section
   packing can be used on all PIDs and higher priority traffic can
   always pre-empt lower priority streams. This reduces the need for
   padding.





Combes                   Expires May 28, 2008                  [Page 9]


Internet-Draft               DVB-RCS MIB                  December 2007


2.2.22. Capacity Categories

   The TDMA timeslot allocation process for the DVB-RCS uplink supports
   several capacity categories.

   The Capacity Categories CRA, RBDC and A/VBDC, when authorized for a
   RC, have to be configured from the NCC. These configuration
   parameters are used to inform the RCST of the configuration of each
   Category at the NCC side and thus help in Capacity Requests
   computation.

   The configuration of these parameters is performed for each RC. A
   SatLabs option is defined that allows their configuration at the RCST
   level in addition to configuration per RC. This option is denoted
   RCST_PARA.

2.2.22.1. Continuous Rate Assignment (CRA)

   CRA is a rate capacity that is provided in full in a continuous
   manner to the RCST while required.

2.2.22.2. Rate-Based Dynamic Capacity (RBDC)

   RBDC is rate capacity that is requested dynamically by an RCST. RBDC
   capacity is provided in response to explicit requests from the RCST
   to the NCC, such requests being absolute (i.e. corresponding to the
   full rate currently being requested). Each request overrides all
   previous RBDC requests from the same RCST, and is subject to a
   maximum rate limit.

2.2.22.3. Volume-Based Dynamic Capacity (VBDC)

   VBDC is volume capacity that is requested dynamically by an RCST.
   VBDC capacity is provided in response to explicit requests from the
   RCST to the NCC, such requests being cumulative (i.e. each request
   adds to all previous requests from the same RCST).

2.2.22.4. Absolute Volume-Based Dynamic Capacity (AVBDC)

   AVBDC is volume capacity that is requested dynamically by an RCST.
   This capacity is provided in response to explicit requests from the
   RCST to the NCC, such requests being absolute (i.e. this request
   replaces the previous ones from the same RCST).

   The combination of AVBDC and VBDC is seen as a single Capacity
   Category, denoted A/VBDC.



Combes                   Expires May 28, 2008                 [Page 10]


Internet-Draft               DVB-RCS MIB                  December 2007


   A SatLabs Option is defined which allows AVBDC requests to be sent
   periodically, as defined by the AVBDCrepTime parameter. This option
   is denoted AVBDC_REP.

2.2.22.5. Population ID

   This defines a group of RCSTs within a Network.

2.2.23. Start transponder

   This is the satellite transponder on which the communication is
   initiated from a RCST point-of-view when in the installation mode.
   The parameters corresponding to this transponder (satellite orbital
   position, frequency, etc.) are stored at the RCST as power-up
   configuration data.

2.2.24. DVB-S

   DVB-S is the Digital Video Broadcast over Satellite [ETSI-DVBS]. It
   is a framework and set of associated standards published by ETSI for
   the transmission of video, audio, and data, using the ISO MPEG-2
   Standard [ISO-MPEG], over satellite links.

2.2.25. DVB-S2 and CCM/VCM/ACM

   DVB-S2 is the Second Generation of the Digital Video Broadcast for
   Satellite applications standard [ETSI-DVBS2]. It is a framework and
   set of associated standards published by ETSI for the transmission of
   video, audio and data.

   BBFRAME: The main framing unit of the DVB-S2 protocol stack.

   CCM: In CCM transmission mode, the forward link uses a constant set
   of transmission parameters (FEC coding rate and modulation scheme)
   for all receivers.

   VCM: In VCM transmission mode, the forward link uses transmission
   parameters which are variable on a BBFRAME-by-BBFRAME, but fixed on a
   Receiver basis, according to fixed link and propagation conditions
   for each Receiver.

   ACM: In ACM transmission mode, the forward link uses transmission
   parameters which are dynamically adjusted on a BBFRAME-by-BBFRAME and
   Receiver-per-Receiver basis, according to actual link and propagation
   conditions.  In order to implement ACM, feedback from each Receiver
   has to be provided by DVB-RCS return channel.



Combes                   Expires May 28, 2008                 [Page 11]


Internet-Draft               DVB-RCS MIB                  December 2007


2.2.26. Interactive Network

   This is another name for a DVB-RCS based satellite network.





2.3. MIB Module

   The MIB module in this document uses the following OBJECT IDENTIFIER
   values as already assigned by IANA under the smi-numbers registry:



                    +------------+---------------------------+
                    | Descriptor | OBJECT IDENTIFIER value   |
                    +------------+---------------------------+
                    |dvbrcsMib   |{ mib-2 transmission 239 } |
                    +------------+---------------------------+

                Table 1: Object Identifiers for the MIB

   These values have been assigned for this MIB under the 'mib-
   2.transmission' subtree.
























Combes                   Expires May 28, 2008                 [Page 12]


Internet-Draft               DVB-RCS MIB                  December 2007


3. Definitions

   DVBRCS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY,
       Integer32,
       IpAddress,
       transmission,
       OBJECT-TYPE
           FROM SNMPv2-SMI        -- [RFC2578]
       TEXTUAL-CONVENTION,
       DisplayString,
       RowStatus
           FROM SNMPv2-TC         -- [RFC2579]
       OBJECT-GROUP,
       MODULE-COMPLIANCE
           FROM SNMPv2-CONF;      -- [RFC2580]

   dvbrcsMIB MODULE-IDENTITY
       LAST-UPDATED "200710301200Z"
       ORGANIZATION "The SatLabs Group"
       CONTACT-INFO
              "The SatLabs Group
               Web:    www.satlabs.org
               E-mail: info@satlabs.org"
       DESCRIPTION
           "DVB-RCS MIB subtree.
           This MIB module applies to equipment that is a
           Return Channel Satellite Terminal (RCST) defined in
           the Digital Video Broadcasting Return
           Channel via Satellite system (DVB-RCS) standard (ETSI EN 301
           791 Digital Video Broadcasting (DVB); Interaction Channel
           for Satellite Distribution Systems, European
           Telecommunications Standards Institute (ETSI)).
           It defines a set of MIB entities to characterise the
           behaviour and performance of network layer entities
           implementing DVB-RCS.
           This MIB module is intended to be used by DVB-RCS equipment
           following the SatLabs System Recommendations, defined by the
           SatLabs Group and available at www.satlabs.org."



Combes                   Expires May 28, 2008                 [Page 13]


Internet-Draft               DVB-RCS MIB                  December 2007


      REVISION "200710301200Z"
      DESCRIPTION
          "Revision of this MIB module, following comments from ipdvb
          WG."
   ::= { transmission 239 }

   ===================================================================
   -- Textual Conventions
   --===================================================================
   SatLabsOptionMap ::= TEXTUAL-CONVENTION
       STATUS current
       DESCRIPTION
           "This textual convention enumerates the declaration of the
            SatLabs defined options. (0) refers to the most significant
            bit."
       REFERENCE
          "SatLabs System Recommendations version 2 available at
           www.satlabs.org"
       SYNTAX BITS     {
               mpegTrf(0),
               coarseSync(1),
               wideHop(2),
               fastHop(3),
               dynamicMfTdma(4),
               routeId(5),
               contentionSync(6),
               qpskLow(7),
               mod16Apsk(8),
               mod32Apsk(9),
               normalFec(10),
               multiTs(11),
               gsTs(12),
               enhQoS(13),
               pep(14),
               http(15),
               ftp(16),
               dhcp(17),
               dns(18),
               avbdcRep(19),
               chIdStrict(20),
               rcstPara(21),


Combes                   Expires May 28, 2008                 [Page 14]


Internet-Draft               DVB-RCS MIB                  December 2007


               nlid(22),
               snmpAll(23),
               installLog(24),
               fwdLinkStatus(25),
               enhClassifier(26),
               spare1(27),
               spare2(28),
               spare3(29),
               spare4(30),
               spare5(31)
               }

   --===================================================================
   -- object type definitions
   --===================================================================
   dvbrcsMIBObjects      OBJECT IDENTIFIER ::= {dvbrcsMIB 1}
   dvbrcsConformance     OBJECT IDENTIFIER ::= {dvbrcsMIB 2}

   rcst        OBJECT IDENTIFIER ::= {dvbrcsMIBObjects 1}
   fwdLink     OBJECT IDENTIFIER ::= {dvbrcsMIBObjects 2}
   rtnLink     OBJECT IDENTIFIER ::= {dvbrcsMIBObjects 3}

   rcstSystem        OBJECT IDENTIFIER ::= {rcst 1}
   rcstNetwork       OBJECT IDENTIFIER ::= {rcst 2}
   rcstInstall       OBJECT IDENTIFIER ::= {rcst 3}
   rcstQos           OBJECT IDENTIFIER ::= {rcst 4}
   rcstControl       OBJECT IDENTIFIER ::= {rcst 5}
   rcstState         OBJECT IDENTIFIER ::= {rcst 6}

   fwdConfig         OBJECT IDENTIFIER ::= {fwdLink 1}
   fwdStatus         OBJECT IDENTIFIER ::= {fwdLink 2}

   rtnConfig         OBJECT IDENTIFIER ::= {rtnLink 1}
   rtnStatus         OBJECT IDENTIFIER ::= {rtnLink 2}

   --===================================================================
   ---    rcstSystem sub-tree object types
   --===================================================================
   systemMibRevision        OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-only


Combes                   Expires May 28, 2008                 [Page 15]


Internet-Draft               DVB-RCS MIB                  December 2007


       STATUS              current
       DESCRIPTION
           "This object allows the SNMP agent to report the implemented
            MIB module revision.
            The supported REVISION of this module is reported."
   ::= {rcstSystem 1}

   --===================================================================
   -- Options declared according to the textual conventions
   --===================================================================
   systemSatlabsOptions OBJECT-TYPE
       SYNTAX        SatLabsOptionMap
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
           "Indicates the options supported as defined in the SatLabs
            System Recommendations version 2.
            A value of 1 indicates that the respective option is
            supported. The mapping to the options is to be understood
            as described here.(0) refers to the most significant bit.

               mpegTrf(0) -> MPEG_TRF
               coarseSync(1) -> COARSE_SYNC
               wideHop(2) -> WIDE_HOPP
               fastHop(3) -> FAST_HOPP
               dynamicMfTdma(4) -> Dynamic_MF_TDMA
               routeId(5) -> ROUTE_ID
               contentionSync(6) -> CONTENTION_SYNC
               qpskLow(7) -> QPSKLOW
               mod16Apsk(8) -> 16APSK
               mod32Apsk(9) -> 32APSK
               normalFec(10) -> NORMALFEC
               multiTs(11) -> MULTITS
               gsTs(12) -> GSTS
               enhQoS(13) -> ENHQOS
               pep(14) -> PEP
               http(15) -> HTTP
               ftp(16) -> FTP
               dhcp(17) -> DHCP
               dns(18) -> DNS
               avbdcRep(19) -> AVBDC_REP


Combes                   Expires May 28, 2008                 [Page 16]


Internet-Draft               DVB-RCS MIB                  December 2007


               chIdStrict(20) -> CHID_STRICT
               rcstPara(21) -> RCST_PARA
               nlid(22) -> NLID
               snmpAll(23) -> SNMPALL
               installLog(24) -> INSTALL_LOG
               fwdLinkStatus(25) -> FWDLINKSTATUS
               enhClassifier(26) -> ENHCLASSIFIER

           The support of specific options mandates the support of
           specific objects and access levels."
       REFERENCE
           "SatLabs System Recommendation version 2 available
            at www.satlabs.org"
   ::= {rcstSystem 2}

   systemLocation OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Physical location of the ODU antenna expressed as
            Longitude, Latitude and Altitude. The string
            shall have 31 characters in the following format:
            <xxxx.xxx>,<a>,<yyyyy.yyy>,<b>,<zzzz.z>,M
            where x, y and z represents digits,
            a=N or S,
            b=E or W,
            Reading the digits from left to right:
            'x' 7 latitude digits; x digits 1-2 contain the degrees,
                x digits 3-7 contain the minutes in decimal;
            'y' 8 longitude digits; y digits 1-3 contain the degrees,
                y digits 4-8 contain the minutes in decimal;
            ''' 5 altitude digits; meters above sea level in decimal;
            '.' is the decimal point;
            ',' is the field separator;
            'M' is the indicator for altitude meters.

            This format is a modified subset of the NMEA 0183
            (National Marine Electronics Association, Interface
            Standard) format for Global Positioning System Fix Data."
   ::= {rcstSystem 3}


Combes                   Expires May 28, 2008                 [Page 17]


Internet-Draft               DVB-RCS MIB                  December 2007



   systemOduAntennaSize OBJECT-TYPE
       SYNTAX              DisplayString
       UNITS               "cm"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This object gives the diameter of the antenna. This value
           shall be given in centimeters. It is defined at
           installation.
           The object can be used in conjunction with environmental
           requirements. "
   ::= {rcstSystem 4}

   systemOduAntennaGain OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dBi"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This field describes the antenna peak gain of the ODU and
           shall be defined by the installer. The gain shall be given
           in tenth of dBi for more flexibility, i.e. 46.5 dBi will be
           represented by 465. Defined at installation."
   ::= {rcstSystem 5}

   systemOduSspa OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 W"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This field describes the Solid State Power Amplifier
           installed in the ODU and shall be defined by the installer.
           The power shall be given in tenth of a Watt, i.e. 0,5 W will
           be represented by 5, 1 W by 10 and 2 W by 20.
           Defined at installation."
   ::= {rcstSystem 6}

   systemOduTxType OBJECT-TYPE
       SYNTAX              DisplayString


Combes                   Expires May 28, 2008                 [Page 18]


Internet-Draft               DVB-RCS MIB                  December 2007


       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Describes the type of transmitter installed in the ODU."
   ::= {rcstSystem 7}

   systemOduRxType OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
            "Describes the type of LNB installed in the ODU, with
            information such as vendor type, output type (single, twin,
            quad,...), etc."
   ::= {rcstSystem 8}

   systemOduRxBand OBJECT-TYPE
       SYNTAX              INTEGER   {
                           oduHighRxBand (0),
                           oduLowRxBand  (1)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Describes whether High Band or Low Band is selected in
           the LNB. Specifying High Band results in activation of a
           18-26 kHz tone with 0.4-0.8 Vpp in the Rx IFL cable:
           (0)    - High Band
           (1)    - Low Band"
   ::= {rcstSystem 9}

   systemOduRxLO OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x100 Hz"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Frequency of LNB Local Oscillator (in 100 Hz)"
   ::= {rcstSystem 10}




Combes                   Expires May 28, 2008                 [Page 19]


Internet-Draft               DVB-RCS MIB                  December 2007


   systemOduTxLO OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x100 Hz"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Frequency of Block Up-Converter Local Oscillator
           (in 100 Hz)."
   ::= {rcstSystem 11}

   --===================================================================
   --    rcstInstall sub-tree object types
   --===================================================================
   installAntennaAlignmentState OBJECT-TYPE
       SYNTAX              INTEGER {
                   antennaAlignmentStart   (1),
                   antennaAlignmentDeny    (2),
                   antennaAlignmentContinue(3),
                   antennaAlignmentStop    (4),
                   antennaAlignmentSuccess (5),
                   antennaAlignmentFail    (6)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Indicates the alignment state of the antenna:
               (1)-Start;
               (2)-Deny;
               (3)-Continue;
               (4)-Stop;
               (5)-Success;
               (6)-Fail"
   ::= {rcstInstall 1}

   installCwFrequency OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x100 Hz"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Frequency at which the transmitted Continuous Wave carrier


Combes                   Expires May 28, 2008                 [Page 20]


Internet-Draft               DVB-RCS MIB                  December 2007


           (in 100 Hz).
            Minimum required precision is 1 kHz."
   ::= {rcstInstall 2}

   installCwMaxDuration OBJECT-TYPE
         SYNTAX              Integer32
        UNITS        "seconds"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
          "Time after which the Continuous Wave carrier must be put
          down (in seconds)"
   ::= {rcstInstall 3}

   installCwPower OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dBm"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Power of the Continuous Wave carrier.
           It is specified in tenth of dBm. This parameter allows for
           fine (manual) tuning of the power setup. Minimum required
           precision is 1 dBm. It must be configurable while CW signal
           is on. Once the power has been properly adjusted, the power
           setup is stored in rtnConfigDefIfLevel."
    ::= {rcstInstall 4}

   installCoPolReading OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
          "Co-Polarisation measured value during installation
          procedure (in 0.1 dB)"
   ::= {rcstInstall 5}

   installXPolReading OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dB"


Combes                   Expires May 28, 2008                 [Page 21]


Internet-Draft               DVB-RCS MIB                  December 2007


       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Cross-Polarisation measured value during installation
           procedure (in 0.1 dB)"
       ::= {rcstInstall 6}

   installCoPolTarget OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Co-Polarisation target value during installation procedure
           (in 0.1 dB)."
   ::= {rcstInstall 7}

   installXPolTarget OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
         "Cross-Polarisation target value during installation procedure
         (in 0.1 dB)"
    ::= {rcstInstall 8}

   installStandByDuration OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "seconds"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Time to wait in stand-by mode (in seconds)"
   ::= {rcstInstall 9}

   installTargetEsN0 OBJECT-TYPE
       SYNTAX              Integer32(0..315)
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current


Combes                   Expires May 28, 2008                 [Page 22]


Internet-Draft               DVB-RCS MIB                  December 2007


       DESCRIPTION
           "This value describes the wanted Es/N0 value that enables
           operation of the return link with the required error
           performance. The values shall be given in tenth of dB and
           the initial value shall be equal to 7 dB. The range shall be
           from 0 dBm to 31.5 dBm with a precision of 0.1 dB."
       DEFVAL        { 70 }
   ::= {rcstInstall 10}

   --===================================================================
   -- rcstNetwork sub-tree object types
   --===================================================================
   networkOamIpAddr OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "OAM IP Address of the RCST. This object is used with both
           IP and interfaces MIB-II subgroups. It uniquely determines
           the interface through which OAM traffic passes.
           The OAM IP address may be statically or dynamically
           assigned. It is system dependent whether the OAM IP address
           and the Traffic IP address are the same address."
   ::= {rcstNetwork 1}

   networkOamIpNetworkMask OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Network Mask for the OAM IP Address."
   ::= {rcstNetwork 2}

   networkOamIpAddrAssign OBJECT-TYPE
       SYNTAX             INTEGER    {
                   oamIpAddressStatic    (1),
                   oamIpAddressDynamic    (2)
       }
       MAX-ACCESS         read-write
       STATUS             current
       DESCRIPTION


Combes                   Expires May 28, 2008                 [Page 23]


Internet-Draft               DVB-RCS MIB                  December 2007


           "Identifies whether the OAM IP address is statically
           (1) or dynamically (2) assigned."
   ::= {rcstNetwork 3}

   networkLanIpAddress OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "IP address of the LAN interface"
   ::= {rcstNetwork 4}

   networkLanIpMask OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Mask for the LAN interface"
   ::= {rcstNetwork 5}

   networkAirInterfaceDefaultGateway OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Default Gateway for the air interface"
   ::= {rcstNetwork 6}

   networkDnsServerIpAddress OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "IP address of the DNS server in the NCC."
   ::= {rcstNetwork 7}

   networkNccMgtIpAddress OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION


Combes                   Expires May 28, 2008                 [Page 24]


Internet-Draft               DVB-RCS MIB                  December 2007


           "IP address of the management server in the NCC."
   ::= {rcstNetwork 8}

   networkConfigFileDownloadUrl OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path name for the configuration file download.
           It includes the protocol type (tftp or ftp) and the
           associated server IP address or hostname. Hostname can
           only be used if DNS is supported by the RCST.
           The format of this parameter follows RFC 1738."
   ::= {rcstNetwork 9}

   networkInstallLogFileDownloadUrl OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path of the installation log file to download.
           It includes the protocol type (tftp or ftp) and the
           associated server IP address or hostname. Hostname can
           only be used if DNS is supported by the RCST. The
           installation log file can be created on the installer's
           computer and downloaded to the RCST.
           The format of this parameter follows RFC 1738."
   ::= {rcstNetwork 10}

   networkConfigFileUploadUrl OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path name for the configuration file upload.
           It includes the protocol type (tftp or ftp) and the
           associated server IP address or hostname. Hostname can
           only be used if DNS is supported by the RCST.
           The format of this parameter follows RFC 1738."
   ::= {rcstNetwork 11}



Combes                   Expires May 28, 2008                 [Page 25]


Internet-Draft               DVB-RCS MIB                  December 2007


   networkLogFileUploadUrl OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path of the event log file. It includes the protocol
           type (tftp or ftp) and the associated server IP address
           or hostname. Hostname can only be used if DNS is supported
           by the RCST.
           The format of this parameter follows RFC 1738."
   ::= {rcstNetwork 12}

   networkInstallLogFileUploadUrl OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path of the installation log file. It includes the
           protocol type (tftp or ftp) and the associated server
           IP address or hostname. Hostname can only be used if DNS is
           supported by the RCST. The installation log file can be
           retrieved from the RCST by the NCC or by the installer
           via the LAN.
           The format of this parameter follows RFC 1738."
   ::= {rcstNetwork 13}

   --===================================================================
   --  rtnConfig sub-tree object types
   --===================================================================
   rtnConfigMaxEirp OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dBm"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Maximum allowed EIRP in tenth of dBm on the return link."
   ::= {rtnConfig 1}

   rtnConfigDefIfLevel OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dBm"


Combes                   Expires May 28, 2008                 [Page 26]


Internet-Draft               DVB-RCS MIB                  December 2007


       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Default transmitted IF power level, specified in tenth of
           dBm, out of the IDU for sending a CSC burst at RCST reboot or
           power on. Applies to all signals transmitted by RCST (CW and
           traffic) immediately."
   ::= {rtnConfig 2}

   --===================================================================
   --  rtnStatus sub-tree object types
   --===================================================================
   rtnStatusEbN0 OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "The EbN0 value reported for the return link, referenced to
           the regular SYNC burst transmission, in 0.1 dB units."
   ::= {rtnStatus 1}

   rtnStatusSFDuration OBJECT-TYPE
       SYNTAX              Integer32 (250..7500)
       UNITS               "0.1 ms"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "The duration of the currently applied return link super-
           frame structure, in tenths of milliseconds."
   ::= {rtnStatus 2}

   rtnStatusPayloadUnit OBJECT-TYPE
       SYNTAX              INTEGER   {
                       unitATM    (0),
                       unitMPEG   (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates if the payload unit used for the return link is


Combes                   Expires May 28, 2008                 [Page 27]


Internet-Draft               DVB-RCS MIB                  December 2007


           ATM or MPEG."
   ::= {rtnStatus 3}

   --===================================================================
   --- fwdConfig sub-tree object types
   --
   =====================================================================
   fwdStartTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF FwdStartEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Lists Forward Links attachment points (e.g. different for
           installation and operation).
           The table describes the forward link parameters used for the
           start-up stream with the NCC."
   ::={fwdConfig 1}

   fwdStartEntry OBJECT-TYPE
       SYNTAX            FwdStartEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the Forward Link StartConfig table."
       INDEX   { fwdStartIndex, fwdStartPopId }
   ::= { fwdStartTable 1 }

   FwdStartEntry ::= SEQUENCE {
                       fwdStartIndex        Integer32,
                       fwdStartPopId        Integer32,
                       fwdStartFrequency     Integer32,
                       fwdStartPolar         INTEGER,
                       fwdStartFormat        INTEGER,
                       fwdStartRolloff       INTEGER,
                       fwdStartSymbolRate    Integer32,
                       fwdStartInnerFec      INTEGER,
                       fwdStartRowStatus     RowStatus
           }

   fwdStartIndex OBJECT-TYPE
       SYNTAX              Integer32 (1..8)


Combes                   Expires May 28, 2008                 [Page 28]


Internet-Draft               DVB-RCS MIB                  December 2007


       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the Forward Link StartConfig table."
   ::={fwdStartEntry 1}


   fwdStartPopId OBJECT-TYPE
       SYNTAX              Integer32 (-1..65535)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Population identifier associated with the start-up
            forward link:
               -1: any (auto)
               0-65535: specific StartPopId
            If 'any' is set, the RCST will assume membership of any
            announced population ID and will commence with logon in
            accordance with this assumption."
   ::={fwdStartEntry 2}

   fwdStartFrequency OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x100 kHz"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Frequency of the start transponder carrying a
           Network Information Table to which any RCST shall
           trigger to acquire forward link. Its value shall be given
           in multiple of 100 kHz."
   ::={fwdStartEntry 3}

   fwdStartPolar OBJECT-TYPE
       SYNTAX              INTEGER   {
                       linearHorizontal (0),
                       linearVertical   (1),
                       circularLeft     (2),
                       circularRight    (3)
       }
       MAX-ACCESS          read-create


Combes                   Expires May 28, 2008                 [Page 29]


Internet-Draft               DVB-RCS MIB                  December 2007


       STATUS              current
       DESCRIPTION
           "2-bit field giving the polarization of the start
           transponder carrying an Network Information Table
           to which any RCST shall trigger to acquire forward link:
               00: linear and horizontal
               01: linear and vertical
               10: circular left
               11: circular right"
   ::={fwdStartEntry 4}

   fwdStartFormat OBJECT-TYPE
       SYNTAX        INTEGER {
                               auto      (-1),
                               dvbs      (0),
                               dvbs2ccm  (1),
                               dvbs2acm  (2)
       }
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Specifies the transmission format standard applied for the
           startup stream. The start transport stream carries a Network
           Information Table that the RCST uses for acquiring the
           forward link signaling. Supported values are:
               -1: unspecified (automatic format acquisition is
                   assumed)
                0: DVB-S (support of this value is mandatory if DVB-S
                   support is claimed)
                1: DVB-S2 with CCM (support of this value is mandatory
                   if DVB-S2 CCM support is claimed)
                2: DVB-S2 with VCM or ACM (support of this value is
                   mandatory if DVB-S2 ACM support is claimed)
           This allows the RCST to discriminate between CCM and VCM/ACM
           when selecting FL.
           The support of automatic format selection is optional. One
           Or several of the other format selections must be supported,
           according to the claimed SatLabs profile support."
   ::={fwdStartEntry 5}




Combes                   Expires May 28, 2008                 [Page 30]


Internet-Draft               DVB-RCS MIB                  December 2007


   fwdStartRolloff OBJECT-TYPE
       SYNTAX        INTEGER {
                           autoRolloff     (0),
                           rolloff020     (1),
                           rolloff025     (2),
                           rolloff035    (3)
                               }
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
           "Specifies the receive filter roll-off applied on the start
           transponder. The start transponder carries a Network
           Information Table that the RCST uses for acquiring the
           forward link signaling.
           Supported values are:
               0: any (auto)
               1: 0.20
               2: 0.25
               3: 0.35"
   ::={fwdStartEntry 6}

   fwdStartSymbolRate OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x100 symbols/s"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Specifies the symbol rate on the start transponder
           carrying a Network Information Table to which any RCST
           shall trigger to acquire forward link. Its value shall be
           given in multiple of 100 symbols/s."
   ::={fwdStartEntry 7}

   fwdStartInnerFec OBJECT-TYPE
       SYNTAX              INTEGER     {
                   autoFec       (-1),
                   fecRate1/2    (0),
                   fecRate2/3    (1),
                   fecRate3/4    (2),
                   fecRate5/6    (3),
                   fecRate7/8    (4),


Combes                   Expires May 28, 2008                 [Page 31]


Internet-Draft               DVB-RCS MIB                  December 2007


                   fecRate8/9    (5),
                   fecRate3/5    (6),
                   fecRate4/5    (7),
                   fecRate9/10   (8),
                   fecRate2/5    (9),
                   fecRate1/3    (10),
                   fecRate1/4    (11),
                   noInnerCode   (12)                }
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Specifies the inner Forward Error Correction used on the
           start transponder carrying a Network Information Table
           to which any RCST shall trigger to acquire forward link.
           Supported values are:
                   autoFec      (-1),
                   fecRate1/2    (0),
                   fecRate2/3    (1),
                   fecRate3/4    (2),
                   fecRate5/6    (3),
                   fecRate7/8    (4),
                   fecRate8/9    (5),
                   fecRate3/5    (6),
                   fecRate4/5    (7),
                   fecRate9/10   (8),
                   fecRate2/5    (9),
                   fecRate1/3    (10),
                   fecRate1/4    (11),
                   noInnerCode   (12)
       The support of autoFec is optional."
   ::={fwdStartEntry 8}

   fwdStartRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Standard SNMP row status"
       DEFVAL  { active }
   ::={fwdStartEntry 9}



Combes                   Expires May 28, 2008                 [Page 32]


Internet-Draft               DVB-RCS MIB                  December 2007


   --===================================================================
   --  fwdStatus sub-tree object types
   --===================================================================
   fwdStatusPopId OBJECT-TYPE
       SYNTAX              Integer32 (0..65535)
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Population identifier applied at log-on:
               0-65535: specific StartPopId
           If the RCST was allowed to logon with any population, the
           RCST will report the base number of the announced
           population ID indicated by the RCS Map Table linkage
           descriptor used at logon."
   ::={fwdStatus 1}

   fwdStatusTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF FwdStatusEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table describes the current status of Forward Link
           interfaces."
   ::={fwdStatus 2}

   fwdStatusEntry OBJECT-TYPE
       SYNTAX            FwdStatusEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the Forward Link Status table. Each entry is
           associated with a physical interface.
           A RCST shall support at least one entry."
       INDEX   { fwdStatusIndex, fwdStatusIfReference }
   ::= { fwdStatusTable 1 }

   FwdStatusEntry ::= SEQUENCE {
                  fwdStatusIndex              Integer32,
                  fwdStatusIfReference        Integer32,
                   fwdStatusNetId             Integer32,
                   fwdStatusNetName           DisplayString,


Combes                   Expires May 28, 2008                 [Page 33]


Internet-Draft               DVB-RCS MIB                  December 2007


                   fwdStatusFormat            INTEGER,
                   fwdStatusFrequency         Integer32,
                   fwdStatusPolar             INTEGER,
                   fwdStatusInnerFec          INTEGER,
                   fwdStatusSymbolRate        Integer32,
                   fwdStatusRolloff           INTEGER,
                   fwdStatusModulation        INTEGER,
                   fwdStatusFecFrame          INTEGER,
                   fwdStatusPilot             INTEGER,
                   fwdStatusBer               Integer32,
                   fwdStatusCnr               Integer32,
                   fwdStatusRxPower           Integer32,
                   fwdStatusRowStatus         RowStatus
           }

   fwdStatusIndex OBJECT-TYPE
       SYNTAX              Integer32 (1..8)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the Forward Link Status table."
   ::={fwdStatusEntry 1}

   fwdStatusIfReference OBJECT-TYPE
       SYNTAX              Integer32 (1..8)
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Cross reference to the interface table"
   ::={fwdStatusEntry 2}

   fwdStatusNetId  OBJECT-TYPE
       SYNTAX              Integer32
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Interactive network identifier of the forward
           link (from RCS Map Table)"
   ::={fwdStatusEntry 3}

   fwdStatusNetName OBJECT-TYPE


Combes                   Expires May 28, 2008                 [Page 34]


Internet-Draft               DVB-RCS MIB                  December 2007


       SYNTAX              DisplayString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "The name of the interactive network of the forward
           link (from RCS Map Table)"
   ::={fwdStatusEntry 4}

   fwdStatusFormat OBJECT-TYPE
       SYNTAX           INTEGER  {
                               dvbs         (0),
                               dvbs2ccm     (1),
                               dvbs2acm     (2),
                               reservedFormat  (3)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Specifies the transmission format applied on the forward
           link. Supported values are (from RMT):
               0: DVB-S
               1: DVB-S2 using CCM
               2: DVB-S2 using VCM or ACM
               3: reserved"
   ::={fwdStatusEntry 5}

   fwdStatusFrequency OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x100 kHz"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "An estimate of the frequency of the forward link. Its value
           shall be given in multiple of 100 kHz."
   ::={fwdStatusEntry 6}

   fwdStatusPolar OBJECT-TYPE
       SYNTAX              INTEGER   {
                       linearHorizontal (0),
                       linearVertical   (1),
                       circularLeft     (2),


Combes                   Expires May 28, 2008                 [Page 35]


Internet-Draft               DVB-RCS MIB                  December 2007


                       circularRight    (3)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "2-bit field giving the polarization of the forward link
           (from RMT):
               00: linear and horizontal
               01: linear and vertical
               10: circular left
               11: circular right"
   ::={fwdStatusEntry 7}

   fwdStatusInnerFec OBJECT-TYPE
       SYNTAX              INTEGER     {
                   unknown      (-1),
                   fecRate1/2    (0),
                   fecRate2/3    (1),
                   fecRate3/4    (2),
                   fecRate5/6    (3),
                   fecRate7/8    (4),
                   fecRate8/9    (5),
                   fecRate3/5    (6),
                   fecRate4/5    (7),
                   fecRate9/10   (8),
                   fecRate2/5    (9),
                   fecRate1/3    (10),
                   fecRate1/4    (11),
                   noInnerCode   (12)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Specifies the inner Forward Error Correction used on the
           forward link for transmission to the RCST.
           Supported values are:
                   unknown      (-1),
                   fecRate1/2    (0),
                   fecRate2/3    (1),
                   fecRate3/4    (2),
                   fecRate5/6    (3),


Combes                   Expires May 28, 2008                 [Page 36]


Internet-Draft               DVB-RCS MIB                  December 2007


                   fecRate7/8    (4),
                   fecRate8/9    (5),
                   fecRate3/5    (6),
                   fecRate4/5    (7),
                   fecRate9/10   (8),
                   fecRate2/5    (9),
                   fecRate1/3    (10),
                   fecRate1/4    (11),
                   noInnerCode   (12)
       The RCST will report a value that has been used for transmission
       to the RCST within the most recent 60 seconds.
       If this is not relevant, the RCST will report 'unknown'."
   ::={fwdStatusEntry 8}

   fwdStatusSymbolRate OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x100 symbols/s"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "An estimate of the symbol rate of the forward link.
           Its value shall be given in multiple of 100 symbol/s."
   ::={fwdStatusEntry 9}


   fwdStatusRolloff OBJECT-TYPE
       SYNTAX              INTEGER   {
                   undefRolloff       (0),
                   rolloff020         (1),
                   rolloff025         (2),
                   rolloff035         (3)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "An estimate of the roll-off applied on the forward link.
           Supported values are:
               0: undefined
               1: 0.20
               2: 0.25
               3: 0.35"


Combes                   Expires May 28, 2008                 [Page 37]


Internet-Draft               DVB-RCS MIB                  December 2007


   ::={fwdStatusEntry 10}

   fwdStatusModulation OBJECT-TYPE
       SYNTAX              INTEGER   {
                   unknown        (0),
                   mBPSK          (1),
                   mQPSK          (2),
                   m8PSK          (3),
                   m16APSK        (4),
                   m32APSK        (5)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates the modulation on the forward link used for
           transmission to the RCST.
               0: unknown
               1: BPSK
               2: QPSK
               3: 8PSK
               4: 16APSK
               5: 32APSK
           The RCST will report a value that has been used for
           transmission to the RCST within the most recent 60 seconds.
           If this is not relevant, the RCST will report 'unknown'."
   ::={fwdStatusEntry 11}

   fwdStatusFecFrame OBJECT-TYPE
       SYNTAX              INTEGER {
                        unknown       (0),
                        shortframe    (1),
                        longframe     (2)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates the frame length used on the forward link for
           transmission to the RCST.
           Supported values are:
               0: Unknown
               1: Short frame


Combes                   Expires May 28, 2008                 [Page 38]


Internet-Draft               DVB-RCS MIB                  December 2007


               2: Normal frame
           The RCST will report a value that has been used for
           transmission to the RCST within the most recent 60 seconds.
           If this is not relevant, the RCST will report 'unknown'."
   ::={fwdStatusEntry 12}

   fwdStatusPilot OBJECT-TYPE
       SYNTAX              INTEGER {
                        unknown      (0),
                        pilotNotused (1),
                        pilotUsed    (2)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates whether pilots are used on the forward link for
           transmission to the RCST.
           Supported values are:
               0: Unknown
               1: Pilots are not used
               2: Pilots are used
           The RCST will report a value that has been used for
           transmission to the RCST within the most recent 60 seconds.
           If this is not relevant, the RCST will report 'unknown'."
   ::={fwdStatusEntry 13}

   fwdStatusBer OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "exponent of 10"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Provides the RCST BER on the Forward Link in log10 units."
   ::={fwdStatusEntry 14}

   fwdStatusCnr OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "0.1 dB"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION


Combes                   Expires May 28, 2008                 [Page 39]


Internet-Draft               DVB-RCS MIB                  December 2007


           "Provides the RCST CNR on the Forward Link in 0.1 dB units."
   ::={fwdStatusEntry 15}

   fwdStatusRxPower OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "0.1 dBm"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Provides the power level of the Forward Link as received at
           the IDU, in 0.1 dBm units."
       DEFVAL { -500 }
   ::={fwdStatusEntry 16}

   fwdStatusRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Standard SNMP row status"
       DEFVAL { active }
   ::={fwdStatusEntry 17}


   ===================================================================
   -- rcstQos sub-tree object types
   --===================================================================
   pktClassTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF PktClassEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table describes the packet classification used in the
           DVB-RCS terminal. The number of entries is specified by
           PktClassIndex. "
   ::={rcstQos 1}

   pktClassEntry OBJECT-TYPE
       SYNTAX            PktClassEntry
       MAX-ACCESS        not-accessible
       STATUS            current


Combes                   Expires May 28, 2008                 [Page 40]


Internet-Draft               DVB-RCS MIB                  December 2007


       DESCRIPTION
          "An entry in the packet classification table. One object type
          of each entry may have a value in the active range (a non-
          default value).The other object types are then assumed set to
          'inactive'. The entry with the lowest index value takes
          precedence when classifying a packet."
       INDEX   { pktClassIndex }
   ::= { pktClassTable 1 }

   PktClassEntry ::= SEQUENCE {
               pktClassIndex           Integer32,
               pktClassDscpLow         Integer32,
               pktClassDscpHigh        Integer32,
               pktClassDscpMarkValue   Integer32,
               pktClassIPProtocol      Integer32,
               pktClassIPSrcAddr       IpAddress,
               pktClassIPSrcAddrMask   IpAddress,
               pktClassIPDstAddr       IpAddress,
               pktClassIPDstAddrMask   IpAddress,
               pktClassSrcPortLow      Integer32,
               pktClassSrcPortHigh     Integer32,
               pktClassDstPortLow      Integer32,
               pktClassDstPortHigh     Integer32,
               pktClassVlanUserPri     Integer32,
               pktClassPhbAssociation  Integer32,
               pktClassRowStatus       RowStatus
           }

   pktClassIndex OBJECT-TYPE
       SYNTAX              Integer32 (1..64)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index automatically incremented by one at row creation."
   ::={pktClassEntry 1}

   pktClassDscpLow OBJECT-TYPE
       SYNTAX              Integer32 (0..63)

       MAX-ACCESS          read-create
       STATUS              current


Combes                   Expires May 28, 2008                 [Page 41]


Internet-Draft               DVB-RCS MIB                  December 2007


       DESCRIPTION
           "This object specifies the low value of a range of DiffServ
            Code Point (DSCP) values to which a packet is compared.
            A value of 0 is used to inactivate."
       DEFVAL        { 0 }
   ::={pktClassEntry 2}

   pktClassDscpHigh OBJECT-TYPE
       SYNTAX              Integer32 (0..63)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the high value of a range of DiffServ
           Code Point (DSCP) values to which a packet is compared.
           A value of 63 is used to inactivate."
       DEFVAL        { 63 }
   ::={pktClassEntry 3}

   pktClassDscpMarkValue OBJECT-TYPE
       SYNTAX              Integer32 (-1..63)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
         "This object is the DiffServ Code Point (DSCP) value used to
         mark the packet, -1 indicates no DSCP marking, possible DSCP
         marks values are (0..63)"
       DEFVAL        { -1 }
   ::={pktClassEntry 4}

   pktClassIPProtocol OBJECT-TYPE
       SYNTAX              Integer32 (-1..255)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the IP protocol to which a
           packet is compared. A value of 255 indicates inactive."
       DEFVAL        { -1 }
   ::={pktClassEntry 5}

   pktClassIPSrcAddr OBJECT-TYPE
       SYNTAX              IpAddress


Combes                   Expires May 28, 2008                 [Page 42]


Internet-Draft               DVB-RCS MIB                  December 2007


       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
         "This object specifies the IP source address to which a
         packet is compared."
   ::={pktClassEntry 6}


   pktClassIPSrcAddrMask OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
         "This object specifies which bits of the IP source address
         will be matched. A mask of all zeros indicates that the
         selectivity is inactive."
       DEFVAL        { '00000000'H }
   ::={pktClassEntry 7}

   pktClassIPDstAddr OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the IP destination address to which a
           packet is compared."
   ::={pktClassEntry 8}

   pktClassIPDstAddrMask OBJECT-TYPE
       SYNTAX              IpAddress
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
          "This object specifies which bits of the IP destination
          address will be matched. A mask of all zeros indicates that
          the selectivity is inactive."
       DEFVAL        { '00000000'H }
   ::={pktClassEntry 9}

   pktClassSrcPortLow OBJECT-TYPE
       SYNTAX              Integer32 (-1..65535)


Combes                   Expires May 28, 2008                 [Page 43]


Internet-Draft               DVB-RCS MIB                  December 2007


       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
         "This object specifies the low range of the source
         port to which a packet is compared. A value of -1 indicates
         that the selectivity is inactive."
       DEFVAL        { -1 }
   ::={pktClassEntry 10}

   pktClassSrcPortHigh OBJECT-TYPE
       SYNTAX              Integer32 (-1..65535)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the high range of the source
            port to which a packet is compared. A value of -1 indicates
            that the selectivity is inactive."
       DEFVAL        { -1 }
   ::={pktClassEntry 11}

   pktClassDstPortLow OBJECT-TYPE
       SYNTAX              Integer32 (-1..65535)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the low range of the destination
           port to which a packet is compared. A value of -1 indicates
           that the selectivity is inactive."
       DEFVAL        { -1 }
   ::={pktClassEntry 12}

   pktClassDstPortHigh OBJECT-TYPE
       SYNTAX              Integer32 (-1..65535)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the high range of the destination
           port to which a packet is compared. A value of -1 indicates
           that the selectivity is inactive."
       DEFVAL        { -1 }
   ::={pktClassEntry 13}


Combes                   Expires May 28, 2008                 [Page 44]


Internet-Draft               DVB-RCS MIB                  December 2007



   pktClassVlanUserPri OBJECT-TYPE
       SYNTAX              Integer32 (-1..7)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
         "This object specifies the VLAN User Priority to which a packet
         is compared. A value of -1 indicates that the selectivity is
         inactive."
       DEFVAL        { -1 }
   ::={pktClassEntry 14}

   pktClassPhbAssociation OBJECT-TYPE
       SYNTAX              Integer32 (0..63)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
         "Associate the filter entry to a specific PHB (refer to
          phbIdentifier)."
   ::={pktClassEntry 15}

   pktClassRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Standard SNMP row status"
   ::={pktClassEntry 16}

   --===================================================================
   -----PhbMappingTable
   --===================================================================
   phbMappingTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF PhbMappingEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table is a list of Per-Hop Behaviour (PHB) MIB entries.
           It describes the PHB mapping to the Request Class."
   ::={rcstQos 2}



Combes                   Expires May 28, 2008                 [Page 45]


Internet-Draft               DVB-RCS MIB                  December 2007


   phbMappingEntry OBJECT-TYPE
       SYNTAX            PhbMappingEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
          "An entry in the PHB mapping table."
       INDEX   { phbIdentifier }
   ::= { phbMappingTable 1 }

   PhbMappingEntry ::= SEQUENCE {
                   phbIdentifier               Integer32,
                   phbName                     DisplayString,
                   phbRequestClassAssociation  Integer32,
                   phbMappingRowStatus         RowStatus
                   }

   phbIdentifier OBJECT-TYPE
       SYNTAX              Integer32 (0..63)
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Identification of the Per-Hop Behaviour (PHB) (0..63)."
   ::={phbMappingEntry 1}

   phbName OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "The name of the Per-Hop Behaviour (PHB)."
   ::={phbMappingEntry 2}

   phbRequestClassAssociation OBJECT-TYPE
       SYNTAX              Integer32 (1..16)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object is an association of this Per-Hop Behaviour
           (PHB) to a Request class (by reference to a Request Class
           index)."
   ::={phbMappingEntry 3}


Combes                   Expires May 28, 2008                 [Page 46]


Internet-Draft               DVB-RCS MIB                  December 2007



   phbMappingRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Standard SNMP row status"
       DEFVAL { active }
   ::={phbMappingEntry 4}


   --===================================================================
   --   RequestClassTable
   --===================================================================
   requestClassTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF RequestClassEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table is a list of Request class entries. This class
           describes the layer 2 QoS objects."
   ::={rcstQos 3}

   requestClassEntry OBJECT-TYPE
       SYNTAX            RequestClassEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
          "An entry in the Request Class table."
       INDEX   { requestClassIndex }
   ::= { requestClassTable 1 }

   RequestClassEntry ::= SEQUENCE {
                   requestClassIndex               Integer32,
                   requestClassName                DisplayString,
                   requestClassChanId              Integer32,
                   requestClassVccVpi              Integer32,
                   requestClassVccVci              Integer32,
                   requestClassPidPoolReference    Integer32,
                   requestClassCra                 Integer32,
                   requestClassRbdcMax             Integer32,


Combes                   Expires May 28, 2008                 [Page 47]


Internet-Draft               DVB-RCS MIB                  December 2007


                   requestClassRbdcTimeout         Integer32,
                   requestClassVbdcMax             Integer32,
                   requestClassVbdcTimeout         Integer32,
                   requestClassVbdcMaxBackLog      Integer32,
                   requestClassAvbdcRepTime        Integer32,
                   requestClassRowStatus           RowStatus
                   }

   requestClassIndex OBJECT-TYPE
       SYNTAX              Integer32 (1..16)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the Request Class table. A total of 16 entries are
           supported."
   ::={requestClassEntry 1}

   requestClassName OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Name of the Request Class."
   ::={requestClassEntry 2}

   requestClassChanId OBJECT-TYPE
       SYNTAX              Integer32 (0..15)
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Channel id of the Request Class."
   ::={requestClassEntry 3}

   requestClassVccVpi OBJECT-TYPE
       SYNTAX              Integer32 (0..255)
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Defines VPI used for the Request Class (ATM profile)."
    ::={requestClassEntry 4}



Combes                   Expires May 28, 2008                 [Page 48]


Internet-Draft               DVB-RCS MIB                  December 2007


   requestClassVccVci OBJECT-TYPE
       SYNTAX              Integer32 (0..65535)
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Defines VCI used for the Request Class (ATM profile)."
   ::={requestClassEntry 5}

   requestClassPidPoolReference OBJECT-TYPE
       SYNTAX              Integer32 (1..16)
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Reference to the Packet IDentifier (PID) pool applicable
           for the Request Class."
   ::={requestClassEntry 6}

   requestClassCra OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "bits/s"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Define Continuous Rate Assignment (CRA) level for the
           Request Class in bit per second (b/s)."
   ::={requestClassEntry 7}

   requestClassRbdcMax OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x2 kbits/s"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Maximum Rate-Based Dynamic Capacity (RBDC) that can be
           requested for the Request Class, in number of 2 kbits/s"
   ::={requestClassEntry 8}

   requestClassRbdcTimeout OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "superframes"
       MAX-ACCESS          read-write


Combes                   Expires May 28, 2008                 [Page 49]


Internet-Draft               DVB-RCS MIB                  December 2007


       STATUS              current
       DESCRIPTION
           "Persistence of the Rate-Based Dynamic Capacity (RBDC)
           request, expressed in superframes"
   ::={requestClassEntry 9}

   requestClassVbdcMax OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "ATM cells/MPEG packets"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Max Volume-Based Dynamic Capacity (VBDC) that can be
           allocated to the Request Class, in payload units (one ATM
           cell or one MPEG packet) per superframe"
   ::={requestClassEntry 10}

   requestClassVbdcTimeout OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "superframes"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Time after which the RCST considers that the pending
           requests are lost. The RCST may issue new request for that
           traffic. Volume-Based Dynamic Capacity (VBDC) Timeout is
           expressed in superframes."
   ::={requestClassEntry 11}

   requestClassVbdcMaxBackLog OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "bytes"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Volume-Based Dynamic Capacity (VBDC) back Log per Request
           Class. (expressed in bytes)"
   ::={requestClassEntry 12}

   requestClassAvbdcRepTime OBJECT-TYPE
       SYNTAX              Integer32


Combes                   Expires May 28, 2008                 [Page 50]


Internet-Draft               DVB-RCS MIB                  December 2007


       UNITS               "superframes"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Optional parameter. Absolute Volume-Based Dynamic Capacity
           (VBDC) requests can be sent periodically, according to the
           value of that parameter, expressed in superframes."
   ::={requestClassEntry 13}

   requestClassRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Standard SNMP row status"
       DEFVAL { active }
   ::={requestClassEntry 14}

   --===================================================================
   -- The table of PID pools
   --===================================================================

   pidPoolTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF PidPoolEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table contains the Packet IDentifier (PID) pools.
           For MPEG profile several Request Classes may be mapped
           within a pool of several PIDs to allow Section Packing
           across Several Request Classes.
           A PID value may occur in more than one PID pool. Each PID
           value can effectively occur only once in each pool."
   ::={rcstQos 4}

   pidPoolEntry OBJECT-TYPE
       SYNTAX            PidPoolEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the PID list table."


Combes                   Expires May 28, 2008                 [Page 51]


Internet-Draft               DVB-RCS MIB                  December 2007


       INDEX   { pidPoolIndex, pidIndex }
   ::= { pidPoolTable 1 }

   PidPoolEntry ::= SEQUENCE {
           pidPoolIndex            Integer32,
           pidIndex                Integer32,
           pidValue                Integer32,
           pidPoolRowStatus        RowStatus
                }

   pidPoolIndex OBJECT-TYPE
       SYNTAX              Integer32 (1..16)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the PID pool in the PID pool table."
   ::={pidPoolEntry 1}

   pidIndex OBJECT-TYPE
       SYNTAX              Integer32 (1..16)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the PID entry within the PID pool."
   ::={pidPoolEntry 2}

   pidValue OBJECT-TYPE
       SYNTAX              Integer32 (0..8191)
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Defines one of the PIDs to be used in a PID pool of
           pidPoolIndex.
           A PID value may occur in more than one PID pool. Each PID
           value can effectively occur only once in each pool."
   ::={pidPoolEntry 3}

   pidPoolRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-write
       STATUS              current


Combes                   Expires May 28, 2008                 [Page 52]


Internet-Draft               DVB-RCS MIB                  December 2007


       DESCRIPTION
           "Standard SNMP row status"
       DEFVAL { active }
   ::={pidPoolEntry 4}

   qosGlobalRbdcMax OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x2 kbits/s"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "The global RBDC max is for information only and it is
           optional (expressed in number of 2 kbits/s)."
   ::={rcstQos 5}

   qosGlobalVbdcMax OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "ATM cells/MPEG packets"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "The global VBDC max is for information only and it is
           optional.(expressed in payload units/superframe)"
   ::={rcstQos 6}

   qosGlobalVbdcMaxBackLog OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "bytes"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "The global VBDC back log is used only if the VBDC back log
           is not configured in the Request class (expressed in
           bytes)."
   ::={rcstQos 7}

   qosGlobalAvbdcRepTime OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "superframes"
       MAX-ACCESS          read-write
       STATUS              current


Combes                   Expires May 28, 2008                 [Page 53]


Internet-Draft               DVB-RCS MIB                  December 2007


       DESCRIPTION
           "The global AVBDC repetition time is optional (expressed in
           superframes)."
   ::={rcstQos 8}

   qosChannelIdStrictDispatching OBJECT-TYPE
       SYNTAX              INTEGER {
                       notStrict (0),
                       strict (1)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Indicates whether the RCST will strictly follow RC
           association when signaled through Channel_ID in the TBTP:
               No strict association (0)
               Strict association (1)"
   ::={rcstQos 9}


   --===================================================================
   -- rcstState sub-tree object types
   --===================================================================
   rcstMode OBJECT-TYPE
       SYNTAX              INTEGER {
                   installation (0),
                   operational (1)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
         "Identifies the current mode of the RCST is and allows it to
         return to the installation mode when needed. Values for the
         RCST mode are:
             Installation (0)
             Operational (1)"
   ::={rcstState 1}

   rcstFaultStatus OBJECT-TYPE
       SYNTAX              INTEGER {
                       nofault (0),


Combes                   Expires May 28, 2008                 [Page 54]


Internet-Draft               DVB-RCS MIB                  December 2007


                       fault (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
          "Provide the fault status of the terminal. The fault status
           management is vendor specific. Values for the Fault Status
           are:
               no fault (0)
               fault (1)"
   ::={rcstState 2}

   rcstFwdLinkStatus OBJECT-TYPE
       SYNTAX              INTEGER {
                       notAcquired (0),
                       acquired     (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
          "Provides the status of the RCST Forward Link. Values for the
          Forward Link Status are:
             Not acquired (0)
             Acquired (1)"
   ::={rcstState 3}

   rcstRtnLinkStatus OBJECT-TYPE
       SYNTAX              INTEGER {
                       loggedOff (0),
                       loggedOn  (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
          "Provides the status of the RCST Return Link. Values for the
          Return Link Status are:
               Logged-off (0)
               Logged-on (1)"
   ::={rcstState 4}

   rcstLogUpdated OBJECT-TYPE


Combes                   Expires May 28, 2008                 [Page 55]


Internet-Draft               DVB-RCS MIB                  December 2007


       SYNTAX              INTEGER {
                       noUpdate         (0),
                       logfileUpdated  (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
          "Indicates the existence of an updated event log file:
               No update (0)
               Event Log file updated (1)
           The RCST should remove the Event Log file updated indication
           as the log file is fetched by the NCC."
   ::={rcstState 5}

   rcstCurrentSoftwareVersion OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Current RCST software version."
   ::={rcstState 6}

   rcstAlternateSoftwareVersion OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Alternate (backup/new) RCST software version."
   ::={rcstState 7}

   rcstActivatedConfigFileVersion OBJECT-TYPE
       SYNTAX              DisplayString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Version of the most recently activated configuration file.
           The version is vendor specific."
   ::={rcstState 8}

   rcstDownloadedConfigFileVersion OBJECT-TYPE
       SYNTAX              DisplayString


Combes                   Expires May 28, 2008                 [Page 56]


Internet-Draft               DVB-RCS MIB                  December 2007


       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
         "Version of the most recently downloaded configuration file.
          Version is vendor specific. If the value is different from
          rcstActivatedConfigFileVersion, it is pending for activation."
   ::={rcstState 9}

   --===================================================================
   -- rcstControl sub-tree object types
   --===================================================================
   ctrlRebootCommand OBJECT-TYPE
       SYNTAX           INTEGER {
                                idle        (1),
                                normal      (2),
                                alternate   (3)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable shall force the RCST to reboot
               (1)- idle
               (2)- normal reboot (from current software load)
               (3)- reboot from alternate load (swap to alternate load
           before reboot)"
       DEFVAL {1}
   ::={rcstControl 1}

   ctrlRcstTxDisable OBJECT-TYPE
       SYNTAX           INTEGER {
                                idle        (1),
                                disable     (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable shall force the RCST to stop transmission
           (transmit disabled as defined in SatLabs System
            Recommendations):
               (1)- idle
               (2)- initiate Tx Disabled"


Combes                   Expires May 28, 2008                 [Page 57]


Internet-Draft               DVB-RCS MIB                  December 2007


       DEFVAL {1}
   ::={rcstControl 2}

   ctrlUserTrafficDisable OBJECT-TYPE
       SYNTAX           INTEGER {
                                idle        (1),
                                disable     (2)
       }
       MAX-ACCESS       read-write
       STATUS           current
       DESCRIPTION
           "This variable shall disable user traffic (only RCST
           management traffic can be transmitted)
               (1)- idle
               (2)- disable user traffic"
       DEFVAL {1}
   ::={rcstControl 3}

   ctrlCwEnable OBJECT-TYPE
       SYNTAX           INTEGER {
                                off    (1),
                                on     (2)
       }
       MAX-ACCESS       read-write
       STATUS           current
       DESCRIPTION
           "This variable will force the RCST to start transmission of
           CW, if the RCST is first set to the installation state, and
           is properly configured for CW transmission:
              (1)- off
              (2)- on"
       DEFVAL {1}
   ::={rcstControl 4}

   ctrlOduTxReferenceEnable OBJECT-TYPE
       SYNTAX           INTEGER {
                                off    (1),
                                on     (2)
       }
       MAX-ACCESS       read-write
       STATUS           current


Combes                   Expires May 28, 2008                 [Page 58]


Internet-Draft               DVB-RCS MIB                  December 2007


       DESCRIPTION
           "Enables activation and deactivation of 10 MHz reference
            clock in the Tx IFL cable:
               (1) off
               (2) on"
       DEFVAL {2}
   ::={rcstControl 5}

   ctrlOduTxDCEnable OBJECT-TYPE
       SYNTAX           INTEGER {
                                off    (1),
                                on     (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Enables activation and deactivation of DC in the Tx IFL
           cable:
             (1) off
             (2) on"
       DEFVAL {2}
   ::={rcstControl 6}

   ctrlOduRxDCEnable OBJECT-TYPE
       SYNTAX           INTEGER {
                                off    (1),
                                on     (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Enables activation and deactivation of DC in the Rx IFL
           cable:
             (1) off
             (2) on"
       DEFVAL {2}
   ::={rcstControl 7}

   ctrlDownloadFileCommand OBJECT-TYPE
       SYNTAX           INTEGER {
                                idle (1),


Combes                   Expires May 28, 2008                 [Page 59]


Internet-Draft               DVB-RCS MIB                  December 2007


                                config (2),
                                installationLog (3)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable will initiate a RCST configuration file
           download process
           (1) idle
           (2) download RCST configuration file from TFTP/FTP server
           (3) download RCST installation log file from TFTP/FTP server
               (INSTALL_LOG Option)"
       DEFVAL {1}
   ::={rcstControl 8}

   ctrlUploadFileCommand OBJECT-TYPE
       SYNTAX           INTEGER {
                            idle              (1),
                            config            (2),
                            eventAlarm        (3),
                            installationLog   (4)
                            }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable will initiate a RCST upload process
           (1) idle
           (2) upload RCST configuration file to TFTP/FTP server
           (3) upload RCST event/alarm log file to TFTP/FTP server
           (4) upload RCST installation log file to TFTP/FTP server
               (INSTALL_LOG Option)"
       DEFVAL {1}
   ::={rcstControl 9}

   ctrlActivateConfigFileCommand OBJECT-TYPE
       SYNTAX           INTEGER {
                                idle            (1),
                                activate        (2)
       }
       MAX-ACCESS          read-write
       STATUS              current


Combes                   Expires May 28, 2008                 [Page 60]


Internet-Draft               DVB-RCS MIB                  December 2007


       DESCRIPTION
           "Triggers the RCST to use the configuration file and update
           its parameters accordingly.  Some RCST implementations may
           require a reboot for the parameters to take effect (vendor
           specific).
           (1)    Idle
           (2)    activate"
       DEFVAL {1}
   ::={rcstControl 10}

   ctrlRcstLogonCommand OBJECT-TYPE
       SYNTAX           INTEGER {
                                idle           (1),
                                logon          (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable will initiate a RCST logon
              (1) idle
              (2) initiate RCST logon"
       DEFVAL {1}
   ::={rcstControl 11}

   ctrlRcstLogoffCommand OBJECT-TYPE
       SYNTAX           INTEGER {
                                idle      (1),
                                logoff    (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable will initiate a RCST logoff
              (1) idle
              (2) initiate RCST logoff"
       DEFVAL {1}
   ::={rcstControl 12}

   --==================================================================
   --    conformance information
   --==================================================================


Combes                   Expires May 28, 2008                 [Page 61]


Internet-Draft               DVB-RCS MIB                  December 2007


   rcstGroups            OBJECT IDENTIFIER ::= {dvbrcsConformance 1}
   rcstCompliances       OBJECT IDENTIFIER ::= {dvbrcsConformance 2}

   --==================================================================
   --    conformance statements
   --==================================================================
   rcstCompliance1 MODULE-COMPLIANCE
        STATUS          current
        DESCRIPTION
            "The compliance statement for DVB-RCS terminals that are
            compliant with SatLabs System Recommendations version 2."

       MODULE  -- this module

              MANDATORY-GROUPS    {rcstSystemGroup, rcstInstallGroup,
   rcstNetworkGroup, rtnConfigGroup, fwdConfigGroup, fwdStatusGroup,
   rcstQosGroup, rcstStateGroup, rcstControlGroup}

                  GROUP       rcstExtSystemGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the SNMPALL option."

                  GROUP       rcstExtNetworkGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the SNMPALL option."

                  GROUP       rcstExtInstallGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the INSTALL_LOG option."

                  GROUP       rcstDnsGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the DNS option."

                  GROUP       rtnExtConfigGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the SNMPALL option."

                  GROUP       fwdExtStatusGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the FWDLINKSTATUS option."


Combes                   Expires May 28, 2008                 [Page 62]


Internet-Draft               DVB-RCS MIB                  December 2007



                  GROUP       rcstEnhancedClassifierGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the ENHCLASSIFIER option."

                  GROUP       rcstMpegQosGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the MPEG option."

                  GROUP       rcstAvbdcRepQosGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the AVBDC_REP option."

                  GROUP       rcstGlobalQosGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the RCST_PARA option."

                  GROUP       rcstGlobalAvbdcRepQosGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support both the RCST_PARA option
                  and the AVBDC_REP option."

                  GROUP       rcstStrictQosGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the CHID_STRICT option."

                  GROUP       rtnStatusGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the SNMPALL option."

                  GROUP       rcstExtControlGroup
                  DESCRIPTION "This group is mandatory for an RCST
                  that claims to support the SNMPALL option."

           OBJECT systemOduTxType
               MIN-ACCESS read-only
               DESCRIPTION    "Write access required if the RCST does
               not provide the information."

           OBJECT systemOduRxType
               MIN-ACCESS read-only


Combes                   Expires May 28, 2008                 [Page 63]


Internet-Draft               DVB-RCS MIB                  December 2007


               DESCRIPTION    "Write access required if the RCST does
               not provide the information."

           OBJECT networkLanIpAddress
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT networkLanIpMask
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT pktClassDscpLow
               MIN-ACCESS read-only
               DESCRIPTION    "Create access only required if
   ENHCLASSIFIER support is claimed."

           OBJECT pktClassDscpHigh
               MIN-ACCESS read-only
               DESCRIPTION    "Create access only required if
   ENHCLASSIFIER support is claimed."

           OBJECT pktClassDscpMarkValue
               MIN-ACCESS read-only
               DESCRIPTION    "Create access only required if
               ENHCLASSIFIER support is claimed."

           OBJECT phbIdentifier
               MIN-ACCESS read-only
               DESCRIPTION    "Create access only required if SNMPALL
               support is claimed."

           OBJECT phbName
               MIN-ACCESS read-only
               DESCRIPTION    "Create access only required if SNMPALL
               support is claimed."

           OBJECT phbRequestClassAssociation
               MIN-ACCESS read-only
               DESCRIPTION    "Create access only required if SNMPALL


Combes                   Expires May 28, 2008                 [Page 64]


Internet-Draft               DVB-RCS MIB                  December 2007


               support is claimed."

           OBJECT phbMappingRowStatus
               MIN-ACCESS read-only
               DESCRIPTION    "Create access only required if SNMPALL
               support is claimed."

           OBJECT requestClassName
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT requestClassChanId
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT requestClassVccVpi
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
                support is claimed."

           OBJECT requestClassVccVci
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT requestClassPidPoolReference
               MIN-ACCESS not-accessible
               DESCRIPTION    "Read-only access required if MPEG option
                is claimed. Write access only required if also SNMPALL
                support is claimed."

           OBJECT requestClassCra
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT requestClassRbdcMax
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL


Combes                   Expires May 28, 2008                 [Page 65]


Internet-Draft               DVB-RCS MIB                  December 2007


               support is claimed."

           OBJECT requestClassRbdcTimeout
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT requestClassVbdcMax
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT requestClassVbdcTimeout
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT requestClassVbdcMaxBackLog
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT requestClassRowStatus
               MIN-ACCESS read-only
               DESCRIPTION    "Write access only required if SNMPALL
               support is claimed."

           OBJECT pidValue
               MIN-ACCESS not-accessible
               DESCRIPTION    "Read-only access required if MPEG option
               is claimed.  Write access only required if also SNMPALL
               support is claimed."

           OBJECT pidPoolRowStatus
               MIN-ACCESS not-accessible
               DESCRIPTION    "Read-only access required if MPEG option
               is claimed.  Write access only required if also SNMPALL
               support is claimed."

   ::= { rcstCompliances 1 }



Combes                   Expires May 28, 2008                 [Page 66]


Internet-Draft               DVB-RCS MIB                  December 2007



   ===================================================================
   --    units of conformance
   --
   ====================================================================

   ===================================================================
   --    object groups for rcst system
   --===================================================================
   rcstSystemGroup OBJECT-GROUP
       OBJECTS {
           systemMibRevision,
           systemLocation,
           systemOduTxType,
           systemOduRxType,
           systemSatlabsOptions
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing information
       applicable for basic device management support."
   ::= { rcstGroups 1 }

   rcstExtSystemGroup OBJECT-GROUP
       OBJECTS {
           systemOduAntennaSize,
           systemOduAntennaGain,
           systemOduSspa,
           systemOduRxBand,
           systemOduRxLO,
           systemOduTxLO,
           installCwPower
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing information
       applicable for extended device management support."
   ::= { rcstGroups 2 }

   ====================================================================
   --    object groups for rcst installation
   --
   ====================================================================


Combes                   Expires May 28, 2008                 [Page 67]


Internet-Draft               DVB-RCS MIB                  December 2007



   rcstInstallGroup OBJECT-GROUP
       OBJECTS {
           installAntennaAlignmentState,
           installCwFrequency,
           installCwMaxDuration,
           installCoPolReading,
           installXPolReading,
           installCoPolTarget,
           installXPolTarget,
           installStandByDuration,
           installTargetEsN0
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing information
       applicable for basic installation support."
   ::= { rcstGroups 3 }

   rcstExtInstallGroup OBJECT-GROUP
       OBJECTS {
           networkInstallLogFileDownloadUrl,
           networkInstallLogFileUploadUrl
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing extended
       device installation support."
   ::= { rcstGroups 4 }

   ====================================================================
   --    object groups for rcst networking
   --
   ====================================================================
   rcstNetworkGroup OBJECT-GROUP
       OBJECTS {
           networkOamIpAddr,
           networkOamIpNetworkMask,
           networkLanIpAddress,
           networkLanIpMask,
           networkConfigFileDownloadUrl,
           networkConfigFileUploadUrl,
           networkLogFileUploadUrl


Combes                   Expires May 28, 2008                 [Page 68]


Internet-Draft               DVB-RCS MIB                  December 2007


           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing basic
   networking management support."
   ::= { rcstGroups 5 }

   rcstExtNetworkGroup OBJECT-GROUP
       OBJECTS {
           networkOamIpAddrAssign,
           networkAirInterfaceDefaultGateway,
           networkNccMgtIpAddress
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing extended
       networking management support."
   ::= { rcstGroups 6 }

   rcstDnsGroup OBJECT-GROUP
       OBJECTS {
           networkDnsServerIpAddress
           }
       STATUS    current
       DESCRIPTION    "IP address of the DNS server to be used to
       resolve URL's as needed."
    ::= { rcstGroups 7 }

   ==================================================================
   --    object groups for return link
   --
   ==================================================================

    rtnConfigGroup OBJECT-GROUP
       OBJECTS {
           rtnConfigDefIfLevel
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing basic return
       link configuration support."
    ::= { rcstGroups 8 }

    rtnExtConfigGroup OBJECT-GROUP


Combes                   Expires May 28, 2008                 [Page 69]


Internet-Draft               DVB-RCS MIB                  December 2007


       OBJECTS {
           rtnConfigMaxEirp
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing extended
       return link configuration support."
    ::= { rcstGroups 9 }

    rtnStatusGroup OBJECT-GROUP
       OBJECTS {
           rcstRtnLinkStatus,
           rtnStatusEbN0,
           rtnStatusSFDuration,
           rtnStatusPayloadUnit
           }
       STATUS    current
       DESCRIPTION    "A collection of objects allowing access to return
   link status."
    ::= { rcstGroups 10 }

   ==================================================================
   --    object groups for forward link
   --
   ==================================================================

   fwdConfigGroup OBJECT-GROUP
       OBJECTS {
               fwdStartPopId,
               fwdStartFrequency,
               fwdStartPolar,
               fwdStartFormat,
               fwdStartRolloff,
               fwdStartSymbolRate,
               fwdStartInnerFec,
               fwdStartRowStatus
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing basic start
       forward link configuration support."
    ::= { rcstGroups 11 }



Combes                   Expires May 28, 2008                 [Page 70]


Internet-Draft               DVB-RCS MIB                  December 2007


    fwdStatusGroup OBJECT-GROUP
       OBJECTS {
           fwdStatusPopId,
           fwdStatusIfReference,
           fwdStatusNetId,
           fwdStatusNetName,
           fwdStatusCnr,
           fwdStatusRowStatus
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing basic forward
   link status."
    ::= { rcstGroups 12 }

    fwdExtStatusGroup OBJECT-GROUP
       OBJECTS {
           fwdStatusFormat,
           fwdStatusFrequency,
           fwdStatusPolar,
           fwdStatusInnerFec,
           fwdStatusSymbolRate,
           fwdStatusRolloff,
           fwdStatusModulation,
           fwdStatusFecFrame,
           fwdStatusPilot,
           fwdStatusBer,
           fwdStatusRxPower,
           rcstFwdLinkStatus
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing extended
   forward link status."
    ::= { rcstGroups 13 }

   ==================================================================
   --    object groups for QOS
   --
   ==================================================================

    rcstQosGroup OBJECT-GROUP
       OBJECTS {


Combes                   Expires May 28, 2008                 [Page 71]


Internet-Draft               DVB-RCS MIB                  December 2007


           pktClassPhbAssociation,
           pktClassDscpLow,
           pktClassDscpHigh,
           pktClassDscpMarkValue,
           pktClassRowStatus,
           phbIdentifier,
           phbName,
           phbRequestClassAssociation,
           phbMappingRowStatus,
           requestClassName,
           requestClassChanId,
           requestClassVccVpi,
           requestClassVccVci,
           requestClassCra,
           requestClassRbdcMax,
           requestClassRbdcTimeout,
           requestClassVbdcMax,
           requestClassVbdcTimeout,
           requestClassVbdcMaxBackLog,
           requestClassRowStatus
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing basic access to
   QOS configuration data."
    ::= { rcstGroups 14 }

    rcstEnhancedClassifierGroup OBJECT-GROUP
       OBJECTS {
           pktClassIPProtocol,
           pktClassIPSrcAddr,
           pktClassIPSrcAddrMask,
           pktClassIPDstAddr,
           pktClassIPDstAddrMask,
           pktClassSrcPortLow,
           pktClassSrcPortHigh,
           pktClassDstPortLow,
           pktClassDstPortHigh,
           pktClassVlanUserPri
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing support for


Combes                   Expires May 28, 2008                 [Page 72]


Internet-Draft               DVB-RCS MIB                  December 2007


       management of the enhanced classifier."
    ::= { rcstGroups 15 }

    rcstMpegQosGroup OBJECT-GROUP
       OBJECTS {
           requestClassPidPoolReference,
           pidValue,
           pidPoolRowStatus
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing access to MPEG
       related link QOS configuration data."
    ::= { rcstGroups 16 }

    rcstAvbdcRepQosGroup OBJECT-GROUP
       OBJECTS {
           requestClassAvbdcRepTime
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing access to
       AVDBC repeat related QOS configuration data."
    ::= { rcstGroups 17 }

    rcstGlobalQosGroup OBJECT-GROUP
       OBJECTS {
           qosGlobalRbdcMax,
           qosGlobalVbdcMax,
           qosGlobalVbdcMaxBackLog
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing access to
       global RCST QOS configuration data."
    ::= { rcstGroups 18 }

    rcstGlobalAvbdcRepQosGroup OBJECT-GROUP
       OBJECTS {
           qosGlobalAvbdcRepTime
           }
       STATUS    current
       DESCRIPTION    "A collection of objects providing access to
       global AVDBC repeat related QOS configuration data."


Combes                   Expires May 28, 2008                 [Page 73]


Internet-Draft               DVB-RCS MIB                  December 2007


    ::= { rcstGroups 19 }

    rcstStrictQosGroup OBJECT-GROUP
       OBJECTS {
           qosChannelIdStrictDispatching
           }
       STATUS    current
       DESCRIPTION    "A collection of objects allowing management of
        strict channel ID dispatching."
    ::= { rcstGroups 20 }

   ==================================================================
   --    object groups for rcst state
   --
   ==================================================================

   rcstStateGroup OBJECT-GROUP
       OBJECTS {
           rcstMode,
           rcstFaultStatus,
           rcstLogUpdated,
           rcstCurrentSoftwareVersion,
           rcstAlternateSoftwareVersion,
           rcstActivatedConfigFileVersion,
           rcstDownloadedConfigFileVersion
           }
       STATUS    current
       DESCRIPTION    "A collection of objects allowing access to RCST
       state."
   ::= { rcstGroups 21 }

   ==================================================================
   --    object groups for rcst control
   --==================================================================
    rcstControlGroup OBJECT-GROUP
       OBJECTS {
           ctrlRebootCommand,
           ctrlUserTrafficDisable,
           ctrlCwEnable,
           ctrlDownloadFileCommand,
           ctrlUploadFileCommand,


Combes                   Expires May 28, 2008                 [Page 74]


Internet-Draft               DVB-RCS MIB                  December 2007


           ctrlActivateConfigFileCommand
           }
       STATUS    current
       DESCRIPTION    "A collection of objects allowing basic RCST
       control."
    ::= { rcstGroups 22 }

   rcstExtControlGroup OBJECT-GROUP
       OBJECTS {
           ctrlRcstTxDisable,
           ctrlOduTxReferenceEnable,
           ctrlOduTxDCEnable,
           ctrlOduRxDCEnable,
           ctrlRcstLogonCommand,
           ctrlRcstLogoffCommand
           }
       STATUS    current
       DESCRIPTION    "A collection of objects allowing extended RCST
       control."
    ::= { rcstGroups 23 }

    END


4. Security Considerations

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.

   SNMP versions prior to SNMPv3 did not include adequate security. Even
   if the network itself is secure (for example by using IPsec), even
   then, there is no control as to who on the secure network is allowed
   to access and GET/SET (read/change/create/delete) the objects in this
   MIB module.

   It is RECOMMENDED that implementers consider the security features
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator


Combes                   Expires May 28, 2008                 [Page 75]


Internet-Draft               DVB-RCS MIB                  December 2007


   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module, is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.



5. IANA Considerations

   This document includes no request to IANA. The assignment described
   in Section 2.2 has already been assigned under the smi-numbers
   registry.



6. Acknowledgments

   The authors thank Gorry Fairhurst for advice in the preparation of
   this document.

   The authors recognize this document is a collective effort of the
   SatLabs Group (www.satlabs.org).



























Combes                   Expires May 28, 2008                 [Page 76]


Internet-Draft               DVB-RCS MIB                  December 2007


7. References

7.1. Normative References

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997 (BEST
             CURRENT PRACTICE).

   [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
             Schoenwaelder, Ed., "Structure of Management Information,
             Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.

   [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
             Schoenwaelder, Ed., "Textual Conventions for SMIv2",
             STD 58, RFC 2579, April 1999.

   [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Conformance Statements for SMIv2", STD 58, RFC 2580, April
             1999.



7.2. Informative References

   [ISO-MPEG] ISO/IEC DIS 13818-1:2000, "Information Technology;
             Generic Coding of Moving Pictures and Associated Audio
             Information Systems", International Standardisation
             Organisation (ISO).

   [ETSI-DAT] EN 301 192, "Digital Video Broadcasting (DVB); DVB
             Specifications for Data Broadcasting", European
             Telecommunications Standards Institute (ETSI).

   [ETSI-DVBS] EN 301 421 "Digital Video Broadcasting (DVB); Modulation
             and Coding for DBS satellite systems at 11/12 GHz",
             European Telecommunications Standards Institute (ETSI).

   [ETSI-DVBS2] ETSI EN 302 307 "Digital Video Broadcasting (DVB);
             Second generation framing structure, channel coding and
             modulation systems for Broadcasting, Interactive Services,
             News Gathering and other broadband satellite applications",
             European Telecommunications Standards Institute (ETSI).

   [ETSI-RCS] ETSI 301 791 "Digital Video Broadcasting (DVB);
             Interaction Channel for Satellite Distribution Systems",
             European Telecommunications Standards Institute (ETSI).



Combes                   Expires May 28, 2008                 [Page 77]


Internet-Draft               DVB-RCS MIB                  December 2007


   [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
             "Introduction and Applicability Statements for Internet-
             Standard Management Framework", RFC 3410, December 2002.

   [RFC4259] Montpetit, M.-J., Fairhurst, G., Clausen, H., Collini-
             Nocker, B., and H. Linder, "A Framework for Transmission of
             IP Datagrams over MPEG-2 Networks", RFC 4259, November
             2005.

   [SATLABS]    SatLabs System Recommendations, version 2, December
             2006. Available at www.satlabs.org.



8. Authors' Addresses

   Stephane Combes
   ESTEC
   European Space Agency
   Keplerlaan 1 - P.O. Box 299
   2200 AG Noordwijk ZH
   The Netherlands

   Email: stephane.combes@esa.int
   URL:   telecom.esa.int


   Petter Chr. Amundsen
   VeriSat AS
   P.O Box 1
   1330 Fornebu
   Norway

   Email: pca@verisat.no
   URL:   www.verisat.no


   Micheline Lambert
   Advantech Satellite Networks
   2341 boul. Alfred-Nobel
   Saint-Laurent (Montreal,)H4S 2A9
   Quebec, Canada

   Email: micheline.lambert@advantechamt.com
   URL:   www.advantechsatnet.com




Combes                   Expires May 28, 2008                 [Page 78]


Internet-Draft               DVB-RCS MIB                  December 2007


   Hans-Peter Lexow
   STM Norway
   Vollsveien 21
   1366 Lysaker
   Norway

   Email: hlexow@stmi.com
   URL:   www.stmi.com


9. Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.



10. Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.




Combes                   Expires May 28, 2008                 [Page 79]


Internet-Draft               DVB-RCS MIB                  December 2007


11. Copyright Statement


   Copyright (C) The IETF Trust (2007).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.









































Combes                   Expires May 28, 2008                 [Page 80]


Internet-Draft               DVB-RCS MIB                  December 2007


   <<< RFC Ed Note: please remove the text below, prior to publications
   >>>



   Change Log.

   Rev -00

   * First draft, for comment by the community.

   Rev -01

   * Second draft, for comment by the community.

   The MIB module is renamed DVBRCS-MIB to reflect that it covers more
   than solely interface issues.

   The MIB has been updated with

         * a conformance section that captures the options

         * structural changes and corrections to achieve this

         * SYNTAX refinements where applicable

         * UNITS declarations where applicable

   Document reformatted to conform to I-D format conventions.

   Rev -02

   * Third draft, for comment by the community.

   Update following comments received from the ipdvb list (Gorry
   Fairhurst).

   <<<End of RFC Ed Note >>











Combes                   Expires May 28, 2008                 [Page 81]