Internet-Draft | SM2 Digital Signature Algorithm for DNSS | January 2024 |
Zhang, et al. | Expires 21 July 2024 | [Page] |
- Workgroup:
- Network Working Group
- Internet-Draft:
- draft-cuiling-dnsop-sm2-alg-15
- Published:
- Intended Status:
- Informational
- Expires:
SM2 Digital Signature Algorithm for DNSSEC
Abstract
This document specifies the use of the SM2 digital signature algorithm and SM3 hash algorithm for DNS Security (DNSSEC).¶
This draft is an independent submission to the RFC series, and does not have consensus of the IETF community.¶
Status of This Memo
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 21 July 2024.¶
Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
1. Introduction
DNSSEC is broadly defined in [RFC4033], [RFC4034], and [RFC4035]. It uses cryptographic keys and digital signatures to provide authentication of DNS data. DNSSEC signature algorithms are registered in the DNSSEC algorithm IANA registry [IANA].¶
This document defines the DNSKEY and RRSIG resource records (RRs) of new signing algorithms: SM2 uses elliptic curves over 256-bit prime fields with SM3 hash algorithm. (A description of SM2 and SM3 can be found in GB/T 32918.2-2016 [GBT-32918.2-2016] or ISO/IEC14888-3:2018 [ISO-IEC14888-3_2018], and GB/T 32905-2016 [GBT-32905-2016] or ISO/IEC10118-3:2018 [ISO-IEC10118-3_2018].) This document also defines the DS RR for the SM3 one-way hash algorithm. In the signing algorithm defined in this document, the size of the key for the elliptic curve is matched with the size of the output of the hash algorithm. Both are 256 bits.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].¶
2. SM3 DS Records
The implementation of SM3 in DNSSEC follows the implementation of SHA-256 as specified in [RFC4509] except that the underlying algorithm is SM3 with digest type code [TBD1, waiting for an IANA's code assignment].¶
The generation of a SM3 hash value is described in Section 5 of [GBT-32905-2016] and generates 256-bit hash value.¶
3. SM2 Parameters
Verifying SM2 signatures requires agreement between the signer and the verifier of the parameters used. SM2 digital signature algorithm has been added to ISO/IEC 14888-3:2018. And the parameters of the curve used in this profile are as follows:¶
p = FFFFFFFE FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 00000000 FFFFFFFF FFFFFFFF a = FFFFFFFE FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 00000000 FFFFFFFF FFFFFFFC b = 28E9FA9E 9D9F5E34 4D5A9E4B CF6509A7 F39789F5 15AB8F92 DDBCBD41 4D940E93 xG = 32C4AE2C 1F198119 5F990446 6A39C994 8FE30BBF F2660BE1 715A4589 334C74C7 yG = BC3736A2 F4F6779C 59BDCEE3 6B692153 D0A9877C C62A4740 02DF32E5 2139F0A0 n = FFFFFFFE FFFFFFFF FFFFFFFF FFFFFFFF 7203DF6B 21C6052B 53BBF409 39D54123¶
4. DNSKEY and RRSIG Resource Records for SM2
4.1. DNSKEY Resource Records
SM2 public keys consist of a single value, called "P". In DNSSEC keys, P is a string of 32 octets that represents the uncompressed form of a curve point, "x | y". (Conversion of a point to an octet string is described in Section 4.2.8 of GB/T 32918.1-2016 [GBT-32918.1-2016].)¶
4.2. RRSIG Resource Records
The SM2 signature is the combination of two non-negative integers, called "r" and "s". The two integers, each of which is formatted as a simple octet string, are combined into a single longer octet string for DNSSEC as the concatenation "r | s". (Conversion of the integers to bit strings is described in Section 4.2.1 of [GBT-32918.1-2016].) Each integer MUST be encoded as 32 octets.¶
Process details are described in Section 6 "Digital signature generation algorithm and its process" in [GBT-32918.2-2016].¶
The algorithm number associated with the DNSKEY and RRSIG resource records is [TBD2, waiting for an IANA’s code assignment], which is described in the IANA Considerations section.¶
Conformant implementations that create records to be put into the DNS MAY implement signing and verification for the above algorithm. Conformant DNSSEC verifiers MAY implement verification for the above algorithm.¶
5. Support for NSEC3 Denial of Existence
This document does not define algorithm aliases mentioned in [RFC5155].¶
A DNSSEC validator that implements the signing algorithms defined in this document MUST be able to validate negative answers in the form of both NSEC and NSEC3 with hash algorithm SHA-1, as defined in [RFC5155]. An authoritative server that does not implement NSEC3 MAY still serve zones that use the signing algorithms defined in this document with NSEC denial of existence.¶
If using NSEC3, the iterations MUST be 0 and salt MUST be an empty string as recommended in Section 3.1 of [RFC9276].¶
6. Example
The following is an example of SM2 keys and signatures in DNS zone file format, including DNSKEY RR, NSEC3PARAM RR, NSEC3 RR with RRSIG RRs and DS RR.¶
Private-key-format: v1.3 Algorithm: [TBD2] (SM2SM3) PrivateKey: V24tjJgXxp2ykscKRZdT+iuR5J1xRQN+FKoQACmo9fA=¶
- example. 3600 IN DS 27215 TBD2 TBD1 (
- 86671f82dd872e4ee73647a95dff7fd0af599ff8a43f fa26c9a2593091653c0e )¶
example. 3600 IN DNSKEY 256 3 TBD2 ( 7EQ32PTAp+1ac6R9Ze2nfB8pPc2OJqkHSjug ALr4SuD9awuQxhfw7wMpiXv7JK4/VwwTrCxJ wu+qUuDsgoBK4w== ) ; ZSK; alg = SM2SM3 ; key id = 65042 example. 3600 IN RRSIG DNSKEY TBD2 1 3600 ( 20230901000000 20220901000000 65042 example. lF2eq49e62Nn4aT5x8ZI6PdRSTPHPDixZdyl lM6GWu4lkRWkpTgWLE4lQK/+qHdNS4DdTd36 Jsuu0FSO5k48Qg== ) example. 0 IN NSEC3PARAM 1 0 10 AABBCCDD example. 0 IN RRSIG NSEC3PARAM TBD2 1 0 ( 20230901000000 20220901000000 65042 example. aqntwEYEJzkVb8SNuJLwdx7f+vivv5IUIeAj¶
- 62KP1QB93KRGR6LM7SEVPJVNG90BLUE8.example. 3600 IN NSEC3
-
1 1 10 AABBCCDD (¶
GTGVQIILTSSJ8FFO9J6DC8PRTFAEA8G2 NS SOA RRSIG DNSKEY NSEC3PARAM )¶
- 62KP1QB93KRGR6LM7SEVPJVNG90BLUE8.example. 3600 IN RRSIG
-
NSEC3 TBD2 2 3600 (¶
20230901000000 20220901000000 65042 example. FOWLegTgFkFY9vCOo4kHwjEvZ+IL1NMl4s9V hVyPOwokd5uOLKeXTP19HIeEtW73WcJ9XNe/ ie/knp7Edo/hxw== )¶
Here is an example program [Example_Program] based on dnspython and gmssl, which supplies key generating, zone signing, zone validating and DS RR generating functions for convenience.¶
7. IANA Considerations
This document will update the IANA registry for digest types in DS records, currently called "Digest Algorithms," in the "Delegation Signer (DS) Resource Record (RR) Type Digest Algorithms" registry group.¶
Value TBD1 Digest Type SM3 Status OPTIONAL Reference This document¶
This document will update the IANA registry "Domain Name System Security (DNSSEC) Algorithm Numbers".¶
Number TBD2 Description SM2 signing algorithm with SM3 hashing algorithm Mnemonic SM2SM3 Zone Signing Y Trans. Sec. * Reference This document¶
* There has been no determination of standardization of the use of this algorithm with Transaction Security.¶
8. Security Considerations
The security strength of SM2 depends on the size of the key. Longer key provides stronger security strength. The security of ECC-based algorithms is influenced by the curve it uses, too.¶
Like any cryptographic algorithm, it may come to pass that a weakness is found in either SM2 or SM3. In this case, the proper remediation is crypto-agility. In the case of DNSSEC, the appropriate approach would be to regenerate appropriate DS, DNSKEY, RRSIG, and NSEC3 records. Care MUST be taken in this situation to permit appropriate rollovers, taking into account record caching. See [RFC7583] for details. Choice of a suitable replacement algorithm should be one that is both widely implemented and not known to have weaknesses.¶
The security considerations listed in [RFC4509] apply here as well.¶
9. References
9.1. Normative References
- [RFC2119]
- Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
- [RFC4033]
- Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "DNS Security Introduction and Requirements", RFC 4033, DOI 10.17487/RFC4033, , <https://www.rfc-editor.org/info/rfc4033>.
- [RFC4034]
- Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "Resource Records for the DNS Security Extensions", RFC 4034, DOI 10.17487/RFC4034, , <https://www.rfc-editor.org/info/rfc4034>.
- [RFC4035]
- Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "Protocol Modifications for the DNS Security Extensions", RFC 4035, DOI 10.17487/RFC4035, , <https://www.rfc-editor.org/info/rfc4035>.
- [IANA]
- IANA, "Domain Name System Security (DNSSEC) Algorithm Numbers", Registered DNSSEC Algorithm Numbers, , <https://www.iana.org/assignments/dns-sec-alg-numbers/dns-sec-alg-numbers.xhtml>.
- [RFC4509]
- Hardaker, W., "Use of SHA-256 in DNSSEC Delegation Signer (DS) Resource Records (RRs)", RFC 4509, DOI 10.17487/RFC4509, , <https://www.rfc-editor.org/info/rfc4509>.
- [RFC5155]
- Laurie, B., Sisson, G., Arends, R., and D. Blacka, "DNS Security (DNSSEC) Hashed Authenticated Denial of Existence", RFC 5155, DOI 10.17487/RFC5155, , <https://www.rfc-editor.org/info/rfc5155>.
- [RFC9276]
- Hardaker, W. and V. Dukhovni, "Guidance for NSEC3 Parameter Settings", BCP 236, RFC 9276, DOI 10.17487/RFC9276, , <https://www.rfc-editor.org/info/rfc9276>.
- [RFC7583]
- Morris, S., Ihren, J., Dickinson, J., and W. Mekking, "DNSSEC Key Rollover Timing Considerations", RFC 7583, DOI 10.17487/RFC7583, , <https://www.rfc-editor.org/info/rfc7583>.
- [GBT-32918.1-2016]
- Standardization Administration of China, "Information security technology --- Public key cryptographic algorithm SM2 based on elliptic curves --- Part 1: General", GB/T 32918.2-2016, , <http://www.gmbz.org.cn/upload/2018-07-24/1532401673134070738.pdf>.
- [GBT-32918.2-2016]
- Standardization Administration of China, "Information security technology --- Public key cryptographic algorithm SM2 based on elliptic curves --- Part 2: Digital signature algorithm", GB/T 32918.2-2016, , <http://www.gmbz.org.cn/upload/2018-07-24/1532401673138056311.pdf>.
- [ISO-IEC14888-3_2018]
- International Organization for Standardization, "IT Security techniques -- Digital signatures with appendix -- Part 3: Discrete logarithm based mechanisms", ISO/IEC 14888-3:2018, .
- [GBT-32905-2016]
- Standardization Administration of China, "Information security technology --- SM3 cryptographic hash algorithm", GB/T 32905-2016, , <http://www.gmbz.org.cn/upload/2018-07-24/1532401392982079739.pdf>.
- [ISO-IEC10118-3_2018]
- International Organization for Standardization, "IT Security techniques -- Hash-functions -- Part 3: Dedicated hash-functions", ISO/IEC 10118-3:2018, .
9.2. Informative References
- [Example_Program]
- Zhang, C., "Sign and Validate DNSSEC Signature with SM2SM3 Algorithm", SM2SM3 DNSSEC Example Program, , <https://github.com/scooct/dnssec_sm2sm3>.