TLS Working Group                                             I. Hajjeh
Internet Draft                                               INEOVATION
                                                               M. Badra
                                                       LIMOS Laboratory
Intended status: Experimental                           October 6, 2008
Expires: April 2009



      Credential Protection Ciphersuites for Transport Layer Security
                                   (TLS)
                draft-hajjeh-tls-identity-protection-07.txt


Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html

   This Internet-Draft will expire on April 6, 2009.

Copyright Notice

   Copyright (C) The IETF Trust (2008).

Abstract

   This document defines a set of cipher suites to add client credential
   protection to the Transport Layer Security (TLS) protocol.  By
   negotiating one of those ciphersuites, the TLS clients will be able



Hajjeh & Badra          Expires April 6, 2009                  [Page 1]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


   to determine for themselves when, how, to what extent and for what
   purpose information about them is communicated to others.  The
   ciphersuites defined in this document can be used only when public
   key certificates are used in the client authentication process.

Table of Contents

   1. Introduction...................................................3
      1.1. Conventions used in this document.........................5
   2. TLS credential protection overview.............................5
      2.1. Certificate and CertificateVerify encryption..............6
         2.1.1. Stream cipher encryption.............................6
         2.1.2. Block cipher encryption..............................7
      2.2. Key derivation............................................7
      2.3. Structure of Certificate and CertificateVerify............8
         2.3.1. Certificate structure................................9
            2.3.1.1. Case TLS version 1.2............................9
            2.3.1.2. Case TLS version 1.1...........................10
            2.3.1.3. Case TLS version 1.0...........................10
         2.3.2. CertificateVerify structure.........................11
            2.3.2.1. Case TLS version 1.2...........................11
            2.3.2.2. Case TLS version 1.1...........................12
            2.3.2.3. Case TLS version 1.0...........................13
      2.4. Message Flow.............................................13
      2.5. New ciphersuites.........................................14
   3. CP_RSA Key Exchange Algorithm.................................14
   4. CP_DHE Key Exchange Algorithm.................................15
   5. CP_ECDHE Key Exchange Algorithm...............................15
   6. Security Considerations.......................................16
   7. IANA Considerations...........................................17
   8. Acknowledgment................................................18
   9. References....................................................18
      9.1. Normative References.....................................18
      9.2. Informative References...................................19
   Author's Addresses...............................................19
   Intellectual Property Statement..................................20
   Disclaimer of Validity...........................................20












Hajjeh & Badra          Expires April 6, 2009                  [Page 2]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


1. Introduction

   The Transport Layer Security (TLS) protocol (TLS v1.0 [RFC2246], TLS
   v1.1 [RFC4346], and TLS v1.2 [RFC5246]), is the most deployed
   security protocol for securing exchanges.  It provides end-to-end
   secure communications between two entities with authentication and
   data protection.

   TLS supports three authentication modes: authentication of both
   parties, only server-side authentication, and anonymous key exchange.
   For each mode, TLS specifies a set of cipher suites.  However,
   anonymous cipher suites are strongly discouraged because they cannot
   prevent man-in-the-middle (MITM) attacks.

   The TLS authentication is usually based on either preshared keys or
   public key certificates.  If a public key certificate is used to
   authenticate the TLS client, the TLS client credentials are sent in
   clear text over the wire.  Thus, any observer can determine the
   credentials used by the client; learn who is reaching the network,
   when, and from where, and hence correlate the client credentials to
   the connection location.

   Credentials protection and privacy are the right to informational
   self-determination, i.e., individuals must be able to determine for
   themselves when, how, to what extent and for what purpose information
   about them is communicated to others.

   TLS client credential protection may be established by changing the
   order of the messages that the client sends after receiving
   ServerHelloDone [CORELLA].  It consists of sending the
   ChangeCipherSpec message before the Certificate and the
   CertificateVerify messages and after the ClientKeyExchange message.
   The ChangeCipherSpec message is sent to notify the receiving party
   that subsequent messages will be protected under the cipher suite and
   keys negotiated during the TLS Handshake.  However, this solution
   requires a major change to the TLS state machine as well as a new TLS
   version.

   TLS client credential protection may also be done through a DHE
   exchange before establishing an ordinary handshake with identity
   information [SSLTLS].  This wouldn't however be secure enough against
   active attackers, which will be able to disclose the client's
   credentials. Moreover, it wouldn't be favorable for some environments
   (e.g., performance-constrained environments with limited CPU power),
   due to the additional cryptographic computations and round trips.




Hajjeh & Badra          Expires April 6, 2009                  [Page 3]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


   TLS client credential protection may also be possible, assuming that
   the client permits renegotiation after the first server
   authentication [RFC5246]: the client and the server establish a TLS
   session with only server-side authentication and then bring up the
   TLS session to establish a second TLS Handshake with mutual
   authentication.  This solution doesn't require a change to TLS.
   However, it requires more asymmetric cryptographic computations and
   augments significantly the number of rounds trips.  In fact,
   renegotiation refers back to an asymmetric encryption/decryption and
   to a full previously certificate chain verified public key, whose
   chain was verified properly during the first handshake and stored in
   the client session context.  In addition, computation overhead
   increases due to all second handshake messages encryption/decryption.
   Regarding the round trips, their number increases dramatically
   especially when small data packets are used to convey TLS messages.
   Furthermore, the server is forced to complete a first TLS handshake
   before it becomes able to confirm if the client has a certificate or
   not.

   TLS client credential protection may as well be done by allowing the
   client and the server to add a TLS extension to their hello messages
   in order to negotiate specific crypto algorithms, and use these to
   protect the client certificate [EAPIP].  This solution may suffer
   from interoperability issues related to TLS Extensions, TLS 1.0 and
   TLS 1.1 implementations, as described in [INTEROP].

   This document defines a set of cipher suites to add client credential
   protection to the TLS protocol.  When one of the cipher suites
   defined through this document is negotiated, a symmetric encryption
   is used to encrypt the TLS client Certificate and the
   CertificateVerify messages as following:

       o The keys for the symmetric encryption and MAC are generated
        uniquely for each TLS Handshake and are based on a secret
        negotiated during the TLS Handshake. These keys don't replace
        the other keys and secrets (master_secret and key_block).

       o Each encrypted message includes a message integrity check using
        a keyed MAC.  Secure hash functions (e.g., SHA, etc.) are used
        for MAC computations.

       o The encryption and MAC algorithms are determined by the
        cipher_suite selected by the server and revealed in the server
        hello message.





Hajjeh & Badra          Expires April 6, 2009                  [Page 4]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


       o Any key generated by this document should be deleted from
        memory once the CertificateVerify message has been encrypted or
        decrypted.

   The reader is expected to become familiar with the TLS standards
   ([RFC5246] and, if needed, [RFC4346] and [RFC2246] for its
   predecessors) prior to studying this document.

1.1. Conventions used in this document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC-2119 [RFC2119].

2. TLS credential protection overview

   This document specifies a set of cipher suites for TLS.  These cipher
   suites reuse existing key exchange algorithms with certificate-based
   authentication, and reuse existing cipher and MAC algorithms from
   [RFC5246], [RFC4492], [RFC3268], and [RFC4132].

   The name of cipher suites defined in this document includes the text
   "CP" to refer to the client credential protection.  An example is
   shown below.

   CipherSuite                         Key Exchange   Cipher        Hash
   TLS_CP_RSA_WITH_AES_128_CBC_SHA     RSA            AES_128_CBC   SHA1
   TLS_CP_DHE_DSS_WITH_AES_128_CBC_SHA DHE            AES_128_CBC   SHA1

   If no certificates are available, the client MUST NOT include any
   credential protection cipher suite in the ClientHello.cipher_suites.

   If the server selects a cipher suite with client credential
   protection, the server MUST send a certificate appropriate for the
   negotiated cipher suite's key exchange algorithm, and MUST request a
   certificate from the client.  If the server, agreeing on using a
   credential protection cipher suite, does not receive a client
   certificate in response to the subsequent certificate request, then
   it MUST abort the session by sending a fatal handshake failure alert.

   The client certificate MUST be appropriate for the negotiated cipher
   suite's key exchange algorithm, and any negotiated extensions.







Hajjeh & Badra          Expires April 6, 2009                  [Page 5]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


2.1. Certificate and CertificateVerify encryption

   If the server selects one of the cipher suites defined in this
   document, the client MUST symmetrically encrypt the Certificate and
   the CertificateVerify messages.

   The encryption and MAC algorithms are determined by the cipher_suite
   selected by the server and revealed in the server hello message.

   The keys for the symmetric encryption and MAC are derived from the
   pre_master_secret.

   This document reuses the hash algorithm and the two symmetric
   encryption modes defined by TLS: stream cipher encryption and block
   cipher encryption, in a manner dependent on the negotiated TLS
   version.

2.1.1. Stream cipher encryption

   In stream cipher encryption, the client symmetrically encrypts the
   Certificate and the CertificateVerify messages without any padding
   byte.  The encryption key cp_client_write_key is computed as
   described in section 2.2.

   The MAC notation slightly varies with the TLS version being employed.
   Symbolically, the MAC in this document is generated as follow:

      In TLS version 1.2:

                MAC(cp_client_write_MAC_key, plaintext)

      The cp_client_write_MAC_key is generated as described in section
      2.2.

      In TLS versions prior to 1.2:

                HMAC_hash(cp_client_write_MAC_secret, plaintext)

      The cp_client_write_MAC_secret is generated as described in
      section 2.2.

   Note that the MAC is computed before encryption. The stream cipher
   encrypts the entire block, including the MAC.






Hajjeh & Badra          Expires April 6, 2009                  [Page 6]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


2.1.2. Block cipher encryption

   In block cipher encryption, every block of plaintext encrypts to a
   block of ciphertext. All block cipher encryption is done in CBC
   (Cipher Block Chaining) mode, and all items that are block-ciphered
   will be an exact multiple of the cipher block length.

   In block cipher encryption, the client uses an explicit
   initialization vector, generated as described through this document.
   The client adds a padding value to force the structure's length of
   each the Certificate and the CertificateVerify messages to be an
   integral multiple of the block cipher's block length, as it is
   described later through this document.

2.2. Key derivation

   For all key exchange methods, the same algorithm is used to convert
   the pre_master_secret into the cp_key_block (credential protection
   key block). The cp_key_block MUST be deleted from memory as soon as
   possible during the TLS handshake, i.e.

        o on the client: after encoding the CertificateVerify message;
        o on the server: after decoding and verifying this message.

   All the keys and parameters generated in this section are used only
   to encrypt and compute the MAC of the client Certificate and the
   CertificateVerify messages.  The name of these keys includes the text
   "cp" to refer to this use.

   The pending premaster secret is used as an entropy source.  To
   generate the CP encryption and MAC keys, compute using the pending
   connection state (see Section 6.1 of [RFC5246])

            cp_key_block = PRF(pre_master_secret, "cp key block",
                               SecurityParameters.server_random +
                               SecurityParameters.client_random);

   until enough output has been generated. Then the cp_key_block is
   partitioned as follows:

   Case TLS version 1.2:

          cp_client_write_MAC_key[SecurityParameters.mac_key_length]
          cp_client_write_key[SecurityParameters.enc_key_length]

   Case TLS version 1.1:



Hajjeh & Badra          Expires April 6, 2009                  [Page 7]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


          cp_client_write_MAC_secret[SecurityParameters.hash_size]
          cp_client_write_key[SecurityParameters.key_material_length]

   Case TLS version 1.0:

          cp_client_write_MAC_secret[SecurityParameters.hash_size]
          cp_client_write_key[SecurityParameters.key_material_length]
          cp_client_write_IV[SecurityParameters.IV_size]

      Note 1: There are always four TLS connection states outstanding
      [RFC5246]: the current read and write states, and the pending read
      and write states.  All records (conveying the Handshake messages)
      are processed under the current read and write states per standard
      TLS rules (i.e., usually no encryption or MAC will be used unless
      renegotiation is in progress).

      When one of the ciphersuites described in this document is
      negotiated, the encryption and MAC keys generated above are used
      to encrypt the content of the Certificate and the
      CertificateVerify messages in the ciphersuite specific part of the
      TLS Handshake Layer, independent of the current processing in the
      TLS Record Layer.

      Note 2: During the handshake, the client MUST send the Certificate
      message before the ClientKeyExchange message. Because the
      ClientKeyExchange message conveys the encrypted pre_master_secret,

          o the client has to use the pre_master_secret before sending
            the ClientKeyExchange message in order to perform the
            credential protection key derivation necessary to encrypt
            the Certificate and the CertificateVerify messages;

          o the server cannot decrypt and verify the content of the
            Certificate and the CertificateVerify messages until it has
            received the ClientKeyExchange message, which allows the
            server to assemble the pre_master_secret needed to perform
            the credential protection key derivation necessary to this
            end.

2.3. Structure of Certificate and CertificateVerify

   The stream-ciphered, block-ciphered and digitally-signed structures
   vary with the TLS version being employed.






Hajjeh & Badra          Expires April 6, 2009                  [Page 8]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


2.3.1. Certificate structure

2.3.1.1. Case TLS version 1.2

      opaque ASN.1Cert<1..2^24-1>;

      struct {
         select (SecurityParameters.cipher_type) {
            case stream:
               stream-ciphered struct {
                  ASN.1Cert certificate_list<0..2^24-1>;
                  opaque MAC[SecurityParameters.mac_length];
               };

            case block:
               opaque IV[SecurityParameters.record_iv_length];
               block-ciphered struct {
                  ASN.1Cert certificate_list<0..2^24-1>;
                  opaque MAC[SecurityParameters.mac_length];
                  uint8 padding[Certificate.padding_length];
                  uint8 padding_length;
               };

         };
     } Certificate;

   The MAC is generated as described in section 2.1.1 (the plaintext is
   the certificate_list).

   IV
     As part of the TLS Handshake, the standard TLS IV (Initialization
     Vector) is generated and therefore used by the TLS Record protocol.
     This document uses a second IV, generated in the same way as
     described in section 6.2.3.2 of [RFC5246].  This IV is only used
     during the encryption/decryption of the content of the Certificate
     message (concatenation of certificate_list and MAC).

     The IV SHOULD be chosen at random, and MUST be unpredictable. For
     block ciphers, the IV length is of length
     SecurityParameters.record_iv_length which is equal to the
     SecurityParameters.block_size.

   padding
     Padding that is added to force the length of the Certificate
     structure to be an integral multiple of the block cipher's block
     length.  The padding MAY be any length up to 255 bytes, as long as
     it results in the length of the encrypted Certificate being an


Hajjeh & Badra          Expires April 6, 2009                  [Page 9]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


     integral multiple of the block length.  Lengths longer than
     necessary might be desirable to frustrate attacks on a protocol
     that are based on analysis of the lengths of exchanged messages.
     Each uint8 in the padding data vector MUST be filled with the
     padding length value.  The receiver MUST check this padding and
     SHOULD use the bad_record_mac alert to indicate padding errors.

   padding_length
     The padding length MUST be such that the total size of the
     Certificate structure is a multiple of the cipher's block length.
     Legal values range from zero to 255, inclusive.  This length
     specifies the length of the padding field exclusive of the
     padding_length field itself.

2.3.1.2. Case TLS version 1.1

      opaque ASN.1Cert<1..2^24-1>;

      struct {
         select (SecurityParameters.cipher_type) {
            case stream:
               stream-ciphered struct {
                  ASN.1Cert certificate_list<0..2^24-1>;
                  opaque MAC[SecurityParameters.hash_size];
               };

            case block:
               block-ciphered struct {
                  opaque IV[SecurityParameters.block_length];
                  ASN.1Cert certificate_list<0..2^24-1>;
                  opaque MAC[SecurityParameters.hash_size];
                  uint8 padding[Certificate.padding_length];
                  uint8 padding_length;
               };

         };
      } Certificate;

   The MAC is generated as described in section 2.1.1 (the plaintext is
   the certificate_list).  For the generation and handling of the IV see
   [RFC4346], section 6.2.3.2; this document supports both sample
   algorithms described there.  The padding and padding_length are
   generated and handled as described in section 2.3.1.1.

2.3.1.3. Case TLS version 1.0

      opaque ASN.1Cert<1..2^24-1>;


Hajjeh & Badra          Expires April 6, 2009                 [Page 10]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


      struct {
         select (SecurityParameters.cipher_type) {
            case stream:
               stream-ciphered struct {
                  ASN.1Cert certificate_list<0..2^24-1>;
                  opaque MAC[SecurityParameters.hash_size];
               };

            case block:
               block-ciphered struct {
                  ASN.1Cert certificate_list<0..2^24-1>;
                  opaque MAC[SecurityParameters.hash_size];
                  uint8 padding[Certificate.padding_length];
                  uint8 padding_length;
               };

         };
      } Certificate;

   The MAC is generated as described in section 2.1.1 (the plaintext is
   the certificate_list).

   As specified for TLS 1.0, with block ciphers in CBC (Cipher Block
   Chaining) mode, the initialization vector (IV) for the Certificate
   content is generated as described in [RFC2246], section 6.2.3.2.

   The padding is generated as described in section 2.3.1.1.

   The IV for CertificateVerify content (section 2.3.2.3) is the last
   ciphertext block from the Certificate content.  For more details of
   TLS 1.0 IV handling, see sections 6.1, 6.2.3.2, and 6.3, of
   [RFC2246].

2.3.2. CertificateVerify structure

2.3.2.1. Case TLS version 1.2

      struct {
         digitally-signed struct {
            opaque handshake_messages[handshake_messages_length];
         };
      } Signature;

      struct {
         select (SecurityParameters.cipher_type) {
            case stream:
               stream-ciphered struct {


Hajjeh & Badra          Expires April 6, 2009                 [Page 11]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


                  Signature signature;
                  opaque MAC[SecurityParameters.mac_length];
               };

            case block:
               opaque IV[SecurityParameters.record_iv_length];
               block-ciphered struct {
                  Signature signature;
                  opaque MAC[SecurityParameters.mac_length];
                  uint8 padding[CertificateVerify.padding_length];
                  uint8 padding_length;
               };

         };
      } CertificateVerify;

   The padding, IV and the MAC are described in section 2.3.1.1,
   replacing Certificate with CertificateVerify and the certificate_list
   with the signature.  The CertificateVerify content is the
   concatenation of the signature and the MAC.  The digitally-signed
   type and the handshake messages are described in the Section 7.4.8 of
   [RFC5246].

2.3.2.2. Case TLS version 1.1

      struct {
         select (SecurityParameters.cipher_type) {
            case stream:
               stream-ciphered struct {
                  Signature signature;
                  opaque MAC[SecurityParameters.hash_size];
               };

            case block:
               block-ciphered struct {
                  opaque IV[SecurityParameters.block_length];
                  Signature signature;
                  opaque MAC[SecurityParameters.hash_size];
                  uint8 padding[CertificateVerify.padding_length];
                  uint8 padding_length;
               };

         };
      } CertificateVerify;

   The padding, IV and the MAC are described in section 2.3.1.2,
   replacing Certificate with CertificateVerify and the certificate_list


Hajjeh & Badra          Expires April 6, 2009                 [Page 12]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


   with the signature.  The CertificateVerify content is the
   concatenation of the signature and the MAC.  The Signature type and
   structure are described in the Sections 7.4.3 and 7.4.8 of [RFC4346].

2.3.2.3. Case TLS version 1.0

      struct {
         select (SecurityParameters.cipher_type) {
            case stream:
               stream-ciphered struct {
                  Signature signature;
                  opaque MAC[SecurityParameters.hash_size];
               };

            case block:
               block-ciphered struct {
                  Signature signature;
                  opaque MAC[SecurityParameters.hash_size];
                  uint8 padding[CertificateVerify.padding_length];
                  uint8 padding_length;
               };

         };
      } CertificateVerify;

   The Signature type and structure are described in the Sections 7.4.3
   and 7.4.8 of [RFC2246].

   With block ciphers in CBC mode, the IV is the last ciphertext block
   from the Certificate content.  The padding and the MAC are generated
   as described in section 2.3.1.3, replacing Certificate with
   CertificateVerify and the certificate_list with the signature.

2.4. Message Flow

         Client                           Server

         ClientHello       -------->
                                          ServerHello
                                          Certificate
                                          ServerKeyExchange*
                           <--------      CertificateRequest
         {Certificate}
         ClientKeyExchange
         {CertificateVerify}
         ChangeCipherSpec
         Finished          -------->


Hajjeh & Badra          Expires April 6, 2009                 [Page 13]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


                                          ChangeCipherSpec
                           <--------      Finished
         Application Data  <------->      Application Data

   * Indicates optional or situation-dependent messages that are not
   always sent.

   {} Indicates messages with symmetrically encrypted body.

   For the DHE key exchange algorithm, the client always sends the
   ClientKeyExchange message conveying its ephemeral DH public key Yc.

   For the ECDHE key exchange algorithm, the client always sends the
   ClientKeyExchange message conveying its ephemeral ECDH public key Yc.

   Current TLS specifications note that if the client certificate
   already contains a suitable DH or ECDH public key, then Yc is
   implicit and does not need to be sent again and consequently, the
   client key exchange message will be sent, but it MUST be empty.  Even
   if the client key exchange message is used to carry the Yc, using the
   same Yc will allow traceability.  Consequently, static Diffie-Hellman
   SHOULD NOT be used with this document.

2.5. New ciphersuites

   The cipher suites in Section 3 (CP_RSA Key Exchange Algorithm) use
   RSA based certificates to mutually authenticate an RSA exchange with
   client credential protection.

   The cipher suites in Section 4 (CP_DHE Key Exchange Algorithm) use
   DHE_RSA or DHE_DSS to mutually authenticate an Ephemeral Diffie-
   Hellman (DHE) exchange.

   The cipher suites in Section 5 (CP_ECDHE Key Exchange Algorithm) use
   ECDHE_RSA or ECDHE_ECDSA to mutually authenticate an Ephemeral EC
   Diffie-Hellman (ECDHE) exchange.

3. CP_RSA Key Exchange Algorithm

   This section defines additional cipher suites that use RSA based
   certificates to authenticate an RSA exchange.  These cipher suites
   give client credential protection.

CipherSuite                           Key        Cipher           Hash
                                      Exchange




Hajjeh & Badra          Expires April 6, 2009                 [Page 14]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


TLS_CP_RSA_WITH_RC4_128_MD5           RSA        RC4_128          MD5
TLS_CP_RSA_WITH_RC4_128_SHA           RSA        RC4_128          SHA1
TLS_CP_RSA_WITH_3DES_EDE_CBC_SHA      RSA        3DES_EDE         SHA1
TLS_CP_RSA_WITH_AES_128_CBC_SHA       RSA        AES_128_CBC      SHA1
TLS_CP_RSA_WITH_AES_256_CBC_SHA       RSA        AES_256_CBC      SHA1
TLS_CP_RSA_WITH_CAMELLIA_128_CBC_SHA  RSA        CAMELLIA_128_CBC SHA1
TLS_CP_RSA_WITH_CAMELLIA_256_CBC_SHA  RSA        CAMELLIA_256_CBC SHA1
TLS_CP_RSA_WITH_AES_128_CBC_SHA256    RSA        AES_128_CBC      SHA256
TLS_CP_RSA_WITH_AES_256_CBC_SHA384    RSA        AES_256_CBC      SHA384

4. CP_DHE Key Exchange Algorithm

   This section defines additional cipher suites that use DHE as key
   exchange algorithm, with RSA or DSS based certificates to
   authenticate an Ephemeral Diffie-Hellman exchange.  These cipher
   suites provide client credentials protection and Perfect Forward
   Secrecy (PFS).

CipherSuite                              Key     Cipher           Hash
                                         Exchange

TLS_CP_DHE_DSS_WITH_3DES_EDE_CBC_SHA     DHE_DSS 3DES_EDE_CBC     SHA1
TLS_CP_DHE_RSA_WITH_3DES_EDE_CBC_SHA     DHE_RSA 3DES_EDE_CBC     SHA1
TLS_CP_DHE_DSS_WITH_AES_128_CBC_SHA      DHE_DSS AES_128_CBC      SHA1
TLS_CP_DHE_RSA_WITH_AES_128_CBC_SHA      DHE_RSA AES_128_CBC      SHA1
TLS_CP_DHE_DSS_WITH_AES_256_CBC_SHA      DHE_DSS AES_256_CBC      SHA1
TLS_CP_DHE_RSA_WITH_AES_256_CBC_SHA      DHE_RSA AES_256_CBC      SHA1
TLS_CP_DHE_DSS_WITH_AES_128_CBC_SHA256   DHE_DSS AES_128_CBC      SHA256
TLS_CP_DHE_RSA_WITH_AES_128_CBC_SHA256   DHE_RSA AES_128_CBC      SHA256
TLS_CP_DHE_DSS_WITH_AES_256_CBC_SHA384   DHE_DSS AES_256_CBC      SHA384
TLS_CP_DHE_RSA_WITH_AES_256_CBC_SHA384   DHE_RSA AES_256_CBC      SHA384
TLS_CP_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA DHE_DSS CAMELLIA_128_CBC SHA1
TLS_CP_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA DHE_RSA CAMELLIA_128_CBC SHA1
TLS_CP_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA DHE_DSS CAMELLIA_256_CBC SHA1
TLS_CP_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA DHE_RSA CAMELLIA_256_CBC SHA1

5. CP_ECDHE Key Exchange Algorithm

   This section defines additional cipher suites that use ECDHE as key
   exchange algorithm, with RSA or ECDSA based certificates to
   authenticate an Ephemeral ECDH exchange.  These cipher suites provide
   client credentials protection and PFS.

CipherSuite                               Key Exchange Cipher       Hash

TLS_CP_ECDHE_ECDSA_WITH_RC4_128_SHA       ECDHE_ECDSA  RC4_128      SHA1
TLS_CP_ECDHE_RSA_WITH_RC4_128_SHA         ECDHE_RSA    RC4_128      SHA1


Hajjeh & Badra          Expires April 6, 2009                 [Page 15]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


TLS_CP_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA  ECDHE_ECDSA  3DES_EDE_CBC SHA1
TLS_CP_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA    ECDHE_RSA    3DES_EDE_CBC SHA1
TLS_CP_ECDHE_ECDSA_WITH_AES_128_CBC_SHA   ECDHE_ECDSA  AES_128_CBC  SHA1
TLS_CP_ECDHE_ECDSA_WITH_AES_256_CBC_SHA   ECDHE_RSA    AES_256_CBC  SHA1
TLS_CP_ECDHE_RSA_WITH_AES_128_CBC_SHA     ECDHE_RSA    AES_256_CBC  SHA1
TLS_CP_ECDHE_RSA_WITH_AES_256_CBC_SHA     ECDHE_RSA    AES_256_CBC  SHA1

6. Security Considerations

   The security considerations described throughout [RFC2246],
   [RFC4346], [RFC5246], [RFC4347], [RFC3268], [RFC4492] and [RFC3268]
   apply here as well.

   In order for the client to be protected against man-in-the-middle
   attacks, the client SHOULD verify that the server provided a valid
   certificate and that the received public key belongs to the server.

   Because the question of whether this is the correct certificate is
   outside of TLS, applications that do implement credential protection
   cipher suites SHOULD enable the client to carefully examine the
   certificate presented by the server to determine if it meets its
   expectations.  Particularly, the client MUST check its understanding
   of the server hostname against the server's identity as presented in
   the server Certificate message.

   In the absence of an application profile specification specifying
   otherwise, the matching is performed according to the following
   rules, as described in [RFC4642]:

      - The client MUST use the server hostname it used to open the
        connection (or the hostname specified in TLS "server_name"
        extension [RFC4366]) as the value to compare against the server
        name as expressed in the server certificate.  The client MUST
        NOT use any form of the server hostname derived from an
        insecure remote source (e.g., insecure DNS lookup).  CNAME
        canonicalization is not done.

      - If a subjectAltName extension of type dNSName is present in the
        certificate, it MUST be used as the source of the server's
        identity.

      - Matching is case-insensitive.

      - A "*" wildcard character MAY be used as the left-most name
        component in the certificate.  For example, *.example.com would
        match a.example.com, foo.example.com, etc., but would not match
        example.com.


Hajjeh & Badra          Expires April 6, 2009                 [Page 16]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


      - If the certificate contains multiple names (e.g., more than one
        dNSName field), then a match with any one of the fields is
        considered acceptable.

   If the match fails, the client MUST either ask for explicit user
   confirmation or terminate the connection and indicate the server's
   identity is suspect.

   Additionally, the client MUST verify the binding between the identity
   of the server to which it connect and the public key presented by
   this servers.  The client SHOULD implement the algorithm in Section 6
   of [RFC5280] for general certificate validation, but MAY supplement
   that algorithm with other validation methods that achieve equivalent
   levels of verification (such as comparing the server certificate
   against a local store of already-verified certificates and identity
   bindings).

   If the client has external information as to the expected identity of
   the server, the hostname check MAY be omitted.

7. IANA Considerations

   This section provides guidance to the IANA regarding registration of
   values related to the credential protection cipher suites.

   CipherSuite TLS_CP_RSA_WITH_RC4_128_MD5              = { 0xXX,0xXX };
   CipherSuite TLS_CP_RSA_WITH_RC4_128_SHA              = { 0xXX,0xXX };
   CipherSuite TLS_CP_RSA_WITH_3DES_EDE_CBC_SHA         = { 0xXX,0xXX };
   CipherSuite TLS_CP_RSA_WITH_AES_128_CBC_SHA          = { 0xXX,0xXX };
   CipherSuite TLS_CP_RSA_WITH_AES_256_CBC_SHA          = { 0xXX,0xXX };
   CipherSuite TLS_CP_RSA_WITH_AES_128_CBC_SHA256       = { 0x00,0xXX };
   CipherSuite TLS_CP_RSA_WITH_AES_256_CBC_SHA384       = { 0x00,0xXX };
   CipherSuite TLS_CP_RSA_WITH_CAMELLIA_128_CBC_SHA     = { 0xXX,0xXX };
   CipherSuite TLS_CP_RSA_WITH_CAMELLIA_256_CBC_SHA     = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_DSS_WITH_3DES_EDE_CBC_SHA     = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_RSA_WITH_3DES_EDE_CBC_SHA     = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_DSS_WITH_AES_128_CBC_SHA      = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_DSS_WITH_AES_128_CBC_SHA256   = { 0x00,0xXX };
   CipherSuite TLS_CP_DHE_RSA_WITH_AES_128_CBC_SHA256   = { 0x00,0xXX };
   CipherSuite TLS_CP_DHE_DSS_WITH_AES_256_CBC_SHA384   = { 0x00,0xXX };
   CipherSuite TLS_CP_DHE_RSA_WITH_AES_256_CBC_SHA384   = { 0x00,0xXX };
   CipherSuite TLS_CP_DHE_RSA_WITH_AES_128_CBC_SHA      = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_DSS_WITH_AES_256_CBC_SHA      = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_RSA_WITH_AES_256_CBC_SHA      = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA = { 0xXX,0xXX };
   CipherSuite TLS_CP_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA = { 0xXX,0xXX };


Hajjeh & Badra          Expires April 6, 2009                 [Page 17]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


   CipherSuite TLS_CP_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA = { 0xXX,0xXX };
   CipherSuite TLS_CP_ECDHE_ECDSA_WITH_RC4_128_SHA      = { 0xXX,0xXX };
   CipherSuite TLS_CP_ECDHE_RSA_WITH_RC4_128_SHA        = { 0xXX,0xXX };
   CipherSuite TLS_CP_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA = { 0xXX,0xXX };
   CipherSuite TLS_CP_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA   = { 0xXX,0xXX };
   CipherSuite TLS_CP_ECDHE_ECDSA_WITH_AES_128_CBC_SHA  = { 0xXX,0xXX };
   CipherSuite TLS_CP_ECDHE_RSA_WITH_AES_128_CBC_SHA    = { 0xXX,0xXX };
   CipherSuite TLS_CP_ECDHE_ECDSA_WITH_AES_256_CBC_SHA  = { 0xXX,0xXX };
   CipherSuite TLS_CP_ECDHE_RSA_WITH_AES_256_CBC_SHA    = { 0xXX,0xXX };

   Note: To facilitate implementation and deployment, it is helpful to
   reserve a specific registry sub-range (minor, major) for credential
   protection cipher suites.

8. Acknowledgment

   People who should be acknowledged include Alfred Hoenes, Pasi Eronen
   and Eric Rescorla.  Listing their names here does not mean that they
   endorse this document, but that they have reviewed it and have
   contributed to its improvement.

9. References

9.1. Normative References

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2246] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0",
             RFC 2246, January 1999.

   [RFC3268] Chown, P., "Advanced Encryption Standard (AES) Ciphersuites
             for Transport Layer Security (TLS)", RFC 3268, June 2002.

   [RFC4132] Moriai, S., Kato, A., Kanda M., "Addition of Camellia
             Cipher Suites to Transport Layer Security (TLS)", RFC 4132,
             July 2005.

   [RFC4346] Dierks, T. and E. Rescorla, "The TLS Protocol Version 1.1",
             RFC 4346, April 2005.

   [RFC4347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer
             Security", RFC 4347, April 2006.

   [RFC4366] Blake-Wilson, S., Nystrom, M., Hopwood, D., Mikkelsen, J.,
             and T. Wright, "Transport Layer Security (TLS) Extensions",
             RFC 4366, April 2006.


Hajjeh & Badra          Expires April 6, 2009                 [Page 18]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


   [RFC4492] Blake-Wilson, S., Bolyard, N., Gupta, V., Hawk, C.,
             Moeller, B., "Elliptic Curve Cryptography (ECC) Cipher
             Suites for Transport Layer Security (TLS)", RFC 4492, May
             2006.

   [RFC4642] Murchison, K., Vinocur, J., Newman, C., "Using Transport
             Layer Security (TLS) with Network News Transfer Protocol
             (NNTP)", RFC 4642, October 2006.

   [RFC5246] Dierks, T. and E. Rescorla, "The TLS Protocol Version 1.2",
             RFC 5246, August 2008.

   [RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
             Housley, R., and W. Polk, "Internet X.509 Public Key
             Infrastructure Certificate and Certificate Revocation List
             (CRL) Profile", RFC 5280, May 2008.

9.2. Informative References

   [SSLTLS]  Rescorla, E., "SSL and TLS: Designing and Building Secure
             Systems", Addison-Wesley, March 2001.

   [CORELLA] Corella, F., "adding client identity protection to TLS",
             message on ietf-tls@lists.certicom.com mailing list,
             http://www.imc.org/ietf-tls/mail-archive/msg02004.html,
             August 2000.

   [INTEROP] Pettersen, Y., "Clientside interoperability experiences for
             the SSL and TLS protocols",
             draft-ietf-tls-interoperability-00 (expired work in
             progress), October 2006.

   [EAPIP]   Urien, P. and M. Badra, "Identity Protection within EAP-
             TLS", draft-urien-badra-eap-tls-identity-protection-01.txt
             (expired work in progress), October 2006.

Author's Addresses

   Ibrahim Hajjeh
   INEOVATION
   France

   Email: hajjeh@ineovation.com






Hajjeh & Badra          Expires April 6, 2009                 [Page 19]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


   Mohamad Badra
   LIMOS Laboratory - UMR6158, CNRS
   France

   Email: badra@isima.fr


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Copyright Statement

   Copyright (C) The IETF Trust (2008).





Hajjeh & Badra          Expires April 6, 2009                 [Page 20]


Internet-Draft  Credential Protection Ciphersuites for TLS  October 2008


   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.









































Hajjeh & Badra          Expires April 6, 2009                 [Page 21]