Network Working Group P. Hallam-Baker
Internet-Draft Comodo Group Inc.
Intended status: Standards Track September 19, 2016
Expires: March 23, 2017
Mathematical Mesh: Platform Configuration
draft-hallambaker-mesh-platform-00
Abstract
The Mathematical Mesh 'The Mesh' is an end-to-end secure
infrastructure that facilitates the exchange of configuration and
credential data between multiple user devices. This document
describes how Mesh profiles are stored for application access on
Windows, Linux and OSX platforms.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on March 23, 2017.
Copyright Notice
Copyright (c) 2016 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Hallam-Baker Expires March 23, 2017 [Page 1]
Internet-Draft Mathematical Mesh Platform Configuration September 2016
Table of Contents
1. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Requirements Language . . . . . . . . . . . . . . . . . . 2
2. Configuration Scope . . . . . . . . . . . . . . . . . . . . . 2
3. Windows Platform Configuration . . . . . . . . . . . . . . . 2
3.1. Registry Key Entries . . . . . . . . . . . . . . . . . . 3
3.2. Data File Locations . . . . . . . . . . . . . . . . . . . 4
3.3. Key Store Entries . . . . . . . . . . . . . . . . . . . . 4
3.4. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 4
3.4.1. Locating a personal profile . . . . . . . . . . . . . 4
3.4.2. Locating a device profile . . . . . . . . . . . . . . 4
3.4.3. Locating an application profile . . . . . . . . . . . 5
4. OSX Platform Configuration . . . . . . . . . . . . . . . . . 5
4.1. Key Storage . . . . . . . . . . . . . . . . . . . . . . . 5
5. Linux Platform Configuration . . . . . . . . . . . . . . . . 5
5.1. Key Storage . . . . . . . . . . . . . . . . . . . . . . . 5
6. JSON configuration File . . . . . . . . . . . . . . . . . . . 6
7. Application Programming Interface . . . . . . . . . . . . . . 6
7.1. C# . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6
9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 6
10. Normative References . . . . . . . . . . . . . . . . . . . . 6
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 7
1. Definitions
1.1. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
2. Configuration Scope
3. Windows Platform Configuration
The Windows Configuration is stored in a combination of Windows Key
Store entries, registry entries and data files.
The profiles that are available to a user are specified as Windows
registry keys.
Cached and archival copies of profiles are stored on the local
machine as data files with file names and locations specified in the
Windows registry.
Cryptographic keys are stored in a Windows key store.
Hallam-Baker Expires March 23, 2017 [Page 2]
Internet-Draft Mathematical Mesh Platform Configuration September 2016
To locate a device, application or personal profile, an application:
Searches for a Windows registry entry that matches the relevant
criteria.
Retrieves the profile data from either a local cached copy or the
corresponding portal.
Accesses the corresponding private keys through the Windows key
store.
The Windows Key store is the natural storage location for
cryptographic keys on the Windows platform as keys are at minimum
protected by the operating system access control mechanism. The
Windows key store also permits the use of cryptographic hardware
devices.
3.1. Registry Key Entries
All keys used by the Mathematical Mesh are stored in the following
Windows registry location:
HKEY_CURRENT_USER\SOFTWARE\CryptoMesh
This location has the following sub keys:
PersonalProfiles (Default) -> UDF fingerprint of the default
personal profile
PersonalProfiles\<UDF> (Default) -> File location for the
profile.
Archive -> File location for the profile archive.
Portals -> Multistring containing portal accounts to which the
profile is registered. The default portal is first.
ApplicationProfiles Web -> UDF fingerprint of default Web
Application profile
SSH -> UDF fingerprint of default SSH Application profile
Network -> UDF fingerprint of default network Application
profile
Mail -> UDF fingerprint of default Mail Application profile
Hallam-Baker Expires March 23, 2017 [Page 3]
Internet-Draft Mathematical Mesh Platform Configuration September 2016
UDF Fingerprint of profile -> File location of profile
DeviceProfiles (Default) -> UDF fingerprint of default device
profile
UDF Fingerprint of Device profile -> File location of device
profile
3.2. Data File Locations
ApplicationData \CryptoMesh\
3.3. Key Store Entries
<>
3.4. Profiles
3.4.1. Locating a personal profile
To locate the default personal profile, an application:
Retrieves the key PersonalProfiles\(Default) to get <UDF>
Locates the profile with identifier <UDF>
To locate the personal profile with identifier UDF, an application:
Retrieves the key PersonalProfiles\<UDF>
Retrieves the latest version of the profile from the location
specified in PersonalProfiles\<UDF>\(Default)
If necessary, the profile is refreshed from one of the accounts
specified in PersonalProfiles\<UDF>\Portal
In case of an inconsistency being detected, the application MAY use
the archived copies of the profile to resynchronize.
Note that having been connected to a profile at some time in the past
does not guarantee that a device currently has access, even if the
device in question was an administration device for the profile.
3.4.2. Locating a device profile
To locate a device profile an application
Hallam-Baker Expires March 23, 2017 [Page 4]
Internet-Draft Mathematical Mesh Platform Configuration September 2016
3.4.3. Locating an application profile
To locate a device profile an application
4. OSX Platform Configuration
The OSX configuration is stored in a combination of a master
configuration file, profile data files and the OSX KeyChain
The profiles that are available to a user are stored in a JSON
configuration file
Cached and archival copies of profiles are stored on the local
machine as data files with file names and locations specified in the
JSON configuration file
Cryptographic keys are stored in the OSX Key Chain.
File locations
The JSON Configuration file is stored in ~/.cryptomesh/profiles.json
Profile data files are stored in a directory ~/.cryptomesh/<UDF>
The latest copy of the profile is stored in <UDF>.mmm
An archive containing all the stored profiles is stored in
<UDF>.all.mmm
4.1. Key Storage
Private keys are stored in the OSX Key Manager in some fashion to be
decided later.
5. Linux Platform Configuration
The Linux configuration is stored in a combination of a master
configuration file, profile data files and private key files.
The file layout of the Linux configuration and data files is
identical to that of OSX.
5.1. Key Storage
Private Keys are stored in the locations that the Linux applications
that are to use them expect to find them.
Hallam-Baker Expires March 23, 2017 [Page 5]
Internet-Draft Mathematical Mesh Platform Configuration September 2016
6. JSON configuration File
7. Application Programming Interface
7.1. C#
The C# reference code base provides the following classes to provide
access to the Mesh machine configuration:
Goedel.Mesh.RegistrationType
Goedel.Mesh.RegistrationMachine
Goedel.Mesh.RegistrationPersonal
Goedel.Mesh.RegistrationDevice
Goedel.Mesh.RegistrationApplication
Goedel.Portability.Windows
Goedel.Portability.OSX
Goedel.Portability.Linux
Goedel.Mesh.Windows
8. IANA Considerations
None
9. Acknowledgements
TBS
10. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997.
Hallam-Baker Expires March 23, 2017 [Page 6]
Internet-Draft Mathematical Mesh Platform Configuration September 2016
Author's Address
Phillip Hallam-Baker
Comodo Group Inc.
Email: philliph@comodo.com
Hallam-Baker Expires March 23, 2017 [Page 7]