Internet-Draft | Mesh UDF | October 2024 |
Hallam-Baker | Expires 17 April 2025 | [Page] |
- Workgroup:
- Network Working Group
- draft-hallambaker-mesh-udf-19:
- draft-hallambaker-mesh-udf
- Published:
- Intended Status:
- Informational
- Expires:
Mathematical Mesh 3.0 Part II: Uniform Data Fingerprint.
Abstract
This document describes the underlying naming and addressing schemes used in the Mathematical Mesh. The means of generating Uniform Data Fingerprint (UDF) values and their presentation as text sequences and as URIs are described.¶
A UDF consists of a binary sequence, the initial eight bits of which specify a type identifier code. For convenience, UDFs are typically presented to the user in the form of a Base32 encoded string. Type identifier codes have been selected so as to provide a useful mnemonic indicating their purpose when presented in Base32 encoding.¶
Two categories of UDF are described. Data UDFs provide a compact presentation of a fixed length binary data value in a format that is convenient for data entry. A Data UDF may represent a cryptographic key, a nonce value or a share of a secret. Fingerprint UDFs provide a compact presentation of a Message Digest or Message Authentication Code value.¶
A Strong Internet Name (SIN) consists of a DNS name which contains at least one label that is a UDF fingerprint of a policy document controlling interpretation of the name. SINs allow a direct trust model to be applied to achieve end-to-end security in existing Internet applications without the need for trusted third parties.¶
UDFs may be presented as URIs to form either names or locators for use with the UDF location service. An Encrypted Authenticated Resource Locator (EARL) is a UDF locator URI presenting a service from which an encrypted resource may be obtained and a symmetric key that may be used to decrypt the content. EARLs may be presented on paper correspondence as a QR code to securely provide a machine-readable version of the same content. This may be applied to automate processes such as invoicing or to provide accessibility services for the partially sighted.¶
[Note to Readers]¶
Discussion of this draft takes place on the MATHMESH mailing list (mathmesh@ietf.org), which is archived at https://mailarchive.ietf.org/arch/search/?email_list=mathmesh.¶
This document is also available online at http://mathmesh.com/Documents/draft-hallambaker-mesh-udf.html.¶
Status of This Memo
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 17 April 2025.¶
Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document.¶
1. Introduction
A Uniform Data Fingerprint (UDF) is a generalized format for presenting and interpreting short binary sequences representing cryptographic keys or fingerprints of data of any specified type. The UDF format provides a superset of the OpenPGP [RFC4880] fingerprint encoding capability with greater encoding density and readability.¶
This document describes the syntax and encoding of UDFs, the means of constructing and comparing them and their use in other Internet addressing schemes.¶
1.1. UDF Types
Two categories of UDF are described. Data UDFs provide a compact presentation of a fixed length binary data value in a format that is convenient for data entry. A Data UDF may represent a cryptographic key or nonce value or a part share of a key generated using a secret sharing mechanism. Fingerprint UDFs provide a compact presentation of a Message Digest or Message Authentication Code value.¶
Both categories of UDF are encoded as a UDF binary sequence, the first octet of which is a Type Identifier and the remaining octets specify the binary value according to the type identifier and data referenced.¶
UDFs are typically presented to the user as a Base32 encoded sequence in groups of four characters separated by dashes. This format provides a useful balance between compactness and readability. The type identifier codes have been selected so as to provide a useful mnemonic when presented in Base32 encoding.¶
The following are examples of UDF values:¶
Nonce: NAC6-LTCH-TH7H-CN5H-Q7NN-G4UE-FW7Q Secret: 7KIV-SMI2-WRDR-2XHJ-ECBB-YC6C-YQ SHA-2 Digest:MB5S-R4AJ-3FBT-7NHO-T26Z-2E6Y-WFH4 SHA-3 Digest:KCM5-7VB6-IJXJ-WKHX-NZQF-OKGZ-EWVN Public Key: OAYC-YMAF-AYBS-WZLQ-AMRQ-ABBA-OETG-WAGM-W6BD-ZIKQ-KUIH-V KTM-AREH-6S6F-XGHC-3IRF-UFTF-WFYU-FPKA¶
Like email addresses, UDFs are not a Uniform Resource Identifier (URI) but may be expressed in URI form by adding the scheme identifier (UDF) for use in contexts where an identifier in URI syntax is required. A UDF URI MAY contain a domain name component allowing it to be used as a locator¶
1.1.1. Cryptographic Keys and Nonces
A Nonce (N) UDF represents a short, fixed length randomly chosen binary value.¶
Nonce UDFs are used within many Mesh protocols and data formats where it is necessary to represent a nonce value in text form.¶
Nonce UDF: NAC6-LTCH-TH7H-CN5H-Q7NN-G4UE-FW7Q¶
An Encryption/Authentication (E) UDF has the same format as a Random UDF but is identified as being intended to be used as a symmetric key for encryption and/or authentication.¶
KeyValue: 91 59 31 1A B4 47 1D 5C E9 20 82 1C 0B C2 C4 Encryption/Authenticator UDF: 7KIV-SMI2-WRDR-2XHJ-ECBB-YC6C-YQ¶
A Share (S) UDF also represents a short, fixed length binary value but only provides one share in secret sharing scheme. Recovery of the binary value requires a sufficient number of shares.¶
Share UDFs are used in the Mesh to support key and data escrow operations without the need to rely on trusted hardware. A share UDF can be copied by hand or printed in human or machine-readable form (e.g. QR code).¶
Key: 7KIV-SMI2-WRDR-2XHJ-ECBB-YC6C-YQ Share 0: SAQP-COY2-MLPI-RZLI-ZDJK-VIIQ-77KD-W Share 1: SAQ6-PZG3-SSRF-3A5U-GS6D-JQAF-6PS3-E Share 2: SARN-5DU4-YZTD-EIP7-UCS3-5XX2-473S-S¶
1.1.2. Fingerprint type UDFS
Fingerprint type UDFs contains a fingerprint value calculated over a content data item and an IANA media type.¶
A Content Digest type UDF is a fingerprint type UDF in which the fingerprint is formed using a cryptographic algorithm. Two digest algorithms are currently supported, SHA-2-512 (M, for Merkle Damgard) and SHA-3-512 (K, for Keccak).¶
The inclusion of the media type in the calculation of the UDF value provides protection against semantic substitution attacks in which content that has been found to be trustworthy when interpreted as one content type is presented in a context in which it is interpreted as a different content type in which it is unsafe.¶
SHA-2-512: MB5S-R4AJ-3FBT-7NHO-T26Z-2E6Y-WFH4 SHA-3-512: KCM5-7VB6-IJXJ-WKHX-NZQF-OKGZ-EWVN¶
An Authentication UDF (A) is formed in the same manner as a fingerprint but using a Message Authentication Code algorithm and a symmetric key.¶
Authentication UDFs are used to express commitments and to provide a means of blinding fingerprint values within a protocol by means of a nonce.¶
SHA-2-512: ABWJ-76ZY-RYNY-T5HN-NWTB-VE2D-YROX¶
1.2. Using UDFs in URIs
The UDF URI scheme allows use of a UDF in contexts where a URF is expected. The UDF URI scheme has two forms, name and locator.¶
1.2.1. Name Form
Name form UDF URIs identify a data resource but do not provide a means of discovery. The URI is simply the scheme (udf
) followed by the UDF value:¶
udf:MB5S-R4AJ-3FBT-7NHO-T26Z-2E6Y-WFH4¶
1.2.2. Locator Form
Locator form UDF URIs identify a data resource and provide a hint that MAY provide a means of discovery. If the content is not available from the location indicated, content obtained from a different source that matches the fingerprint MAY be used instead.¶
udf://example.com/MB5S-R4AJ-3FBT-7NHO-T26Z-2E6Y-WFH4¶
UDF locator form URIs presenting a fingerprint type UDF provide a tight binding of the content to the locator. This allows the resolved content to be verified and rejected if it has been modified.¶
UDF locator form URIs presenting an Encryptor/Authenticator type UDF provide a mechanism for identification, discovery and decryption of encrypted content. UDF locators of this type are known as Encrypted/Authenticated Resource Locators (EARLs).¶
Regardless of the type of the embedded UDF, UDF locator form URIs are resolved by first performing DNS Web Service Discovery to identify the Web Service Endpoint for the mmm-udf service at the specified domain.¶
Resolution is completed by presenting the Content Digest Fingerprint of the UDF value specified in the URI to the specified Web Service Endpoint and performing a GET method request on the result.¶
For example, Alice subscribes to Example.com, a purveyor of cat and kitten images. The company generates paper and electronic invoices on a monthly basis.¶
To generate the paper invoice, Example.com first creates a new encryption key:¶
EAGB-5GUQ-A7VV-X4M7-5L6V-GAT6-CATI-YA¶
One or more electronic forms of the invoice are encrypted under the key EAGB-5GUQ-A7VV-X4M7-5L6V-GAT6-CATI-YA and placed on the Example.com Web site so that the appropriate version is returned if Alice scans the QR code.¶
The key is then converted to form an EARL for the example.com UDF resolution service:¶
udf://example.com/EAGB-5GUQ-A7VV-X4M7-5L6V-GAT6-CATI-YA¶
The EARL is then rendered as a QR code:¶
A printable invoice containing the QR code is now generated and sent to Alice.¶
When Alice receives the invoice, she can pay it by simply scanning the invoice with a device that recognizes at least one of the invoice formats supported by Example.com.¶
The UDF EARL locator shown above is resolved by first determining the Web Service Endpoint for the mmm-udf service for the domain example.com.¶
Discover ("example.com", "mmm-udf") = https://example.com/.well-known/mmm-udf/¶
Next the fingerprint of the source UDF is obtained.¶
UDF (EAGB-5GUQ-A7VV-X4M7-5L6V-GAT6-CATI-YA) = MBZN-RAFJ-GCFE-FATS-Y2UH-2VJQ-RJOJ-KOV4-MKXM-OL52-XATJ-SY3J-3DIS-DYKP¶
Combining the Web Service Endpoint and the fingerprint of the source UDF provides the URI from which the content is obtained using the normal HTTP GET method:¶
https://example.com/.well-known/mmm-udf/MBZN-RAFJ-GCFE-FATS-Y2UH-2VJQ-RJOJ-KOV4-MKXM-OL52-XATJ-SY3J-3DIS-DYKP¶
Having established that Alice can read postal mail sent to a physical address and having delivered a secret to that address, this process might be extended to provide a means of automating the process of enrolment in electronic delivery of future invoices.¶
1.3. Secure Internet Names
A SIN is an Internet Identifier that contains a UDF fingerprint of a security policy document that may be used to verify the interpretation of the identifier. This permits traditional forms of Internet address such as URIs and RFC822 email addresses to be used to express a trusted address that is independent of any trusted third party.¶
This document only describes the syntax and interpretation of the identifiers themselves. The means by which the security policy documents bound to an address govern interpretation of the name is discussed separately in [draft-hallambaker-mesh-trust].¶
For example, Example Inc holds the domain name example.com and has deployed a private CA whose root of trust is a PKIX certificate with the UDF fingerprint MB2GK-6DUF5-YGYYL-JNY5E-RWSHZ.¶
Alice is an employee of Example Inc., she uses three email addresses:¶
- alice@example.com
-
A regular email address (not a SIN).¶
- alice@mm--mb2gk-6duf5-ygyyl-jny5e-rwshz.example.com
-
A strong email address that is backwards compatible.¶
- alice@example.com.mm--mb2gk-6duf5-ygyyl-jny5e-rwshz
-
A strong email address that is backwards incompatible.¶
All three forms of the address are valid RFC822 addresses and may be used in a legacy email client, stored in an address book application, etc. But the ability of a legacy client to make use of the address differs. Addresses of the first type may always be used. Addresses of the second type may only be used if an appropriate MX record is provisioned. Addresses of the third type will always fail unless the resolver understands that it is a SIN requiring special processing.¶
These rules allow Bob to send email to Alice with either 'best effort' security or mandatory security as the circumstances demand.¶
2. Definitions
This section presents the related specifications and standard, the terms that are used as terms of art within the documents and the terms used as requirements language.¶
2.1. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].¶
2.2. Defined Terms
- Cryptographic Digest Function
-
A hash function that has the properties required for use as a cryptographic hash function. These include collision resistance, first pre-image resistance and second pre-image resistance.¶
- Content Type
-
An identifier indicating how a Data Value is to be interpreted as specified in the IANA registry Media Types.¶
- Commitment
-
A cryptographic primitive that allows one to commit to a chosen value while keeping it hidden to others, with the ability to reveal the committed value later.¶
- Data Value
-
The binary octet stream that is the input to the digest function used to calculate a digest value.¶
- Data Object
-
A Data Value and its associated Content Type¶
- Digest Algorithm
-
A synonym for Cryptographic Digest Function¶
- Digest Value
-
The output of a Cryptographic Digest Function¶
- Data Digest Value
-
The output of a Cryptographic Digest Function for a given Data Value input.¶
- Fingerprint
-
A presentation of the digest value of a data value or data object.¶
- Fingerprint Presentation
-
The representation of at least some part of a fingerprint value in human or machine-readable form.¶
- Fingerprint Improvement
-
The practice of recording a higher precision presentation of a fingerprint on successful validation.¶
- Fingerprint Work Hardening
-
The practice of generating a sequence of fingerprints until one is found that matches criteria that permit a compressed presentation form to be used. The compressed fingerprint thus being shorter than but presenting the same work factor as an uncompressed one.¶
- Hash
-
A function which takes an input and returns a fixed-size output. Ideally, the output of a hash function is unbiased and not correlated to the outputs returned to similar inputs in any predictable fashion.¶
- Precision
-
The number of significant bits provided by a Fingerprint Presentation.¶
- Work Factor
-
A measure of the computational effort required to perform an attack against some security property.¶
2.4. Implementation Status
The implementation status of the reference code base is described in the companion document [draft-hallambaker-mesh-developer].¶
3. Architecture
A Uniform Data Fingerprint (UDF) is a presentation of a UDF Binary Data Sequence.¶
This document specifies seven UDF Binary Data Sequence types and one presentation.¶
The first octet of a UDF Binary Data Sequence identifies the UDF type and is referred to as the Type identifier.¶
UDF Binary Data Sequence types are either fixed length or variable length. A variable length Binary Data Sequence MUST be truncated for presentation. Fixed length Binary Data Sequences MUST not be truncated.¶
3.1. Base32 Presentation
The default UDF presentation is Base32 Presentation.¶
Variable length Binary Data Sequences are truncated to an integer multiple of 20 bits that provides the desired precision before conversion to Base32 form.¶
Fixed length Binary Data Sequences are converted to Base32 form without truncation.¶
After conversion to Base32 form, dash '-' characters are inserted between groups of 4 characters to aid reading. This representation improves the accuracy of both data entry and verification.¶
3.1.1. Precision Improvement
Precision improvement is the practice of using a high precision UDF (e.g. 260 bits) calculated from content data that has been validated according to a lower precision UDF (e.g. 120 bits).¶
This allows a lower precision UDF to be used in a medium such as a business card where space is constrained without compromising subsequent uses.¶
Applications SHOULD make use of precision improvement wherever possible.¶
3.2. Type Identifier
A Version Identifier consists of a single byte.¶
The byte codes have been chosen so that the first character of the Base32 presentation of the UDF provides a mnemonic for its type. A SHA-2 fingerprint UDF will always have M (for Merkle Damgard) as the initial letter, a SHA-3 fingerprint UDF will always have K (for Keccak) as the initial letter, and so on.¶
The following version identifiers are specified in this document:¶
Type ID | Initial | Algorithm |
---|---|---|
0 | A | HMAC_SHA_2_512 |
1 | A | HMAC_SHA_3_512 |
32 | E | HKDF_AES_512 |
33 | E | HKDF_AES_512 |
80 | K | SHA_3_512 |
81 | K | SHA_3_512 (20 compressed) |
82 | K | SHA_3_512 (30 compressed) |
83 | K | SHA_3_512 (40 compressed) |
84 | K | SHA_3_512 (50 compressed) |
96 | M | SHA_2_512 |
97 | M | SHA_2_512 (20 compressed) |
98 | M | SHA_2_512 (30 compressed) |
99 | M | SHA_2_512 (40 compressed) |
100 | M | SHA_2_512 (50 compressed) |
104 | N | Nonce Data |
112 | O | OID distinguished sequence (DER encoded) |
144 | S | Shamir Secret Share |
200 | Z | Secret seed |
3.3. Content Type Identifier
A secure cryptographic digest algorithm provides a unique digest value that is probabilistically unique for a particular byte sequence but does not fix the context in which a byte sequence is interpreted. While such ambiguity may be tolerated in a fingerprint format designed for a single specific field of use, it is not acceptable in a general-purpose format.¶
For example, the SSH and OpenPGP applications both make use of fingerprints as identifiers for the public keys used but using different digest algorithms and data formats for representing the public key data. While no such vulnerability has been demonstrated to date, it is certainly conceivable that a crafty attacker might construct an SSH key in such a fashion that OpenPGP interprets the data in an insecure fashion. If the number of applications making use of fingerprint format that permits such substitutions is sufficiently large, the probability of a semantic substitution vulnerability being possible becomes unacceptably large.¶
A simple control that defeats such attacks is to incorporate a content type identifier within the scope of the data input to the hash function.¶
3.4. Truncation
Different applications of fingerprints demand different tradeoffs between compactness of the representation and the number of significant bits. A larger the number of significant bits reduces the risk of collision but at a cost to convenience.¶
Modern cryptographic digest functions such as SHA-2 produce output values of at least 256 bits in length. This is considerably larger than most uses of fingerprints require and certainly greater than can be represented in human readable form on a business card.¶
Since a strong cryptographic digest function produces an output value in which every bit in the input value affects every bit in the output value with equal probability, it follows that truncating the digest value to produce a finger print is at least as strong as any other mechanism if digest algorithm used is strong.¶
Using truncation to reduce the precision of the digest function has the advantage that a lower precision fingerprint of some data content is always a prefix of a higher prefix of the same content. This allows higher precision fingerprints to be converted to a lower precision without the need for special tools.¶
3.4.1. Compressed presentation
The Content Digest UDF types make use of work factor compression. Additional type identifiers are used to indicate digest values with 20, 30, 40 or 50 trailing zero bits allowing a UDF fingerprint offering the equivalent of up to 150 bits of precision to be expressed in 20 characters instead of 30.¶
To use compressed UDF identifiers, it is necessary to search for content that can be compressed. If the digest algorithm used is secure, this means that by definition, the fastest means of search is brute force. Thus, the reduction in fingerprint size is achieved by transferring the work factor from the attacker to the defender. To maintain a work factor of 2120 with an identifier of 280 bits, it is necessary for the content generator to perform a brute force search at a cost of the order of 240 operations.¶
For example, the smallest allowable work factor for a UDF presentation of a public key fingerprint is 92 bits. This would normally require a presentation with 20 significant characters. Reducing this to 16 characters requires a brute force search of approximately 106 attempts. Reducing this to 12 characters would require 1012 attempts and to 10 characters, 1015 attempts.¶
Omission of support for higher levels of compression than 250 is intentional.¶
In addition to allowing use of shorter presentations, work factor compression MAY be used as evidence of proof of work.¶
3.5. Presentation
The presentation of a fingerprint is the format in which it is presented to either an application or the user.¶
Base32 encoding is used to produce the preferred text representation of a UDF fingerprint. This encoding uses only the letters of the Latin alphabet with numbers chosen to minimize the risk of ambiguity between numbers and letters (2, 3, 4, 5, 6 and 7).¶
To enhance readability and improve data entry, characters are grouped into groups of four. This means that each block of four characters represents an increase in work factor of approximately one million times.¶
3.6. Alternative Presentations
Applications that support UDF MUST support use of the Base32 presentation. Applications MAY support alternative presentations.¶
3.6.1. Word Lists
The use of a Word List to encode fingerprint values was introduced by Patrick Juola and Philip Zimmerman for the PGPfone application. The PGP Word List is designed to facilitate exchange and verification of fingerprint values in a voice application. To minimize the risk of misinterpretation, two-word lists of 256 values each are used to encode alternative fingerprint bytes. The compact size of the lists used allowed the compilers to curate them so as to maximize the phonetic distance of the words selected.¶
The PGP Word List is designed to achieve a balance between ease of entry and verification. Applications where only verification is required may be better served by a much larger word list, permitting shorter fingerprint encodings.¶
For example, a word list with 16384 entries permits 14 bits of the fingerprint to be encoded at once, 65536 entries permit encoding of 16 bits. These encodings allow a 120-bit fingerprint to be encoded in 9 and 8 words respectively.¶
3.6.2. Image List
An image list is used in the same manner as a word list affording rapid visual verification of a fingerprint value. For obvious reasons, this approach is not suited to data entry but is preferable for comparison purposes. An image list of 1,048,576 images would provide a 20-bit encoding allowing 120 bit precision fingerprints to be displayed in six images.¶
4. Fixed Length UDFs
Fixed length UDFs are used to represent cryptographic keys, nonces and secret shares and have a fixed length determined by their function that cannot be truncated without loss of information.¶
All fixed length Binary Data Sequence values are an integer multiple of eight bits.¶
4.1. Nonce Type
A Nonce Type UDF consists of the type identifier octet 104 followed by the Binary Data Sequence value.¶
The Binary Data Sequence value is an integer number of octets that SHOULD have been generated in accordance with processes and procedures that ensure that it is sufficiently unpredictable for the purposes of the protocol in which the value is to be used. Requirements for such processes and procedures are described in [RFC4086].¶
Nonce Type UDFs are intended for use in contexts where it is necessary for a randomly chosen value to be unpredictable but not secret. For example, the challenge in a challenge/response mechanism.¶
4.2. OID Identified Sequence
An OID Identified Sequence Type UDF consists of the type identifier octet 108 followed by the Binary Data Sequence value.¶
The Binary Data Sequence value is an octet sequence that contains the DER encoding of the following ASN.1 data:¶
OIDInfo ::= SEQUENCE { algorithm AlgorithmIdentifier, data BIT STRING } AlgorithmIdentifier ::= SEQUENCE { algorithm OBJECT IDENTIFIER, parameters ANY DEFINED BY algorithm OPTIONAL }¶
OID Identified Sequences are intended to allow arbitrary data sequences to be encoded in the UDF format without exhausting the limited type identifier space.¶
In particular, OID Identified Sequences MAY be used to specify public and private key values.¶
Given the following Ed25519 public key:¶
71 26 6B 00 CC B7 82 3C A1 50 55 10 7A AA 6C 04 48 7F 4B C5 B9 8E 2D A2 25 A1 66 5B 17 14 2B D4¶
The equivalent DER encoding is:¶
30 2C 30 05 06 03 2B 65 70 03 23 00 04 20 71 26 6B 00 CC B7 82 3C A1 50 55 10 7A AA 6C 04 48 7F 4B C5 B9 8E 2D A2 25 A1 66 5B 17 14 2B D4¶
To encode this key as a UDF OID sequence we prepend the value OID and convert to Base32:¶
OID: OAYC-YMAF-AYBS-WZLQ-AMRQ-ABBA-OETG-WAGM-W6BD-ZIKQ-KUIH-V KTM-AREH-6S6F-XGHC-3IRF-UFTF-WFYU-FPKA¶
The corresponding UDF content digest value is more compact and allows us to identify the key unambiguously but does not provide the value:¶
MCCR-IPW7-AUHT-I7HV-FX4A-CLD3-LU7E¶
4.3. Encryption/Authentication Type
Encryption and Authenticator Type UDFs consists of the type identifier specifying the algorithm to be used on the key data followed by the Binary Data Sequence value.¶
The Binary Data Sequence value is an integer number of octets that SHOULD have been generated in accordance with processes and procedures that ensure that it is sufficiently unpredictable and unguessable for the purposes of the protocol in which the value is to be used. Requirements for such processes and procedures are described in [RFC4086].¶
Encryption and Authenticator Type UDFs are intended to be used as a means of specifying secret cryptographic keying material. For example, the input to a Key Derivation Function used to encrypt a document. Accordingly, the identifier UDF corresponding to an Encryption or Authenticator type UDF is a UDF fingerprint of the UDF in Base32 presentation with content type 'application/udf'.¶
4.4. Key Pair Derivation
The key pair derivation type is used to specify a public key pair value by means of a sufficiently random input to a deterministic key generation function.¶
A key pair derivation Type UDF consists of the type identifier octet 200 followed by the Binary Data Sequence value.¶
The first two octets of the Binary Data Sequence value comprise the Key Specifier which specifies the algorithm and key uses for which the private key is to be derived.¶
- Bits 6-7 of the first octet specify the key use.¶
- Bits 0-5 of the first byte and bits 0-7 of the second specify the key type in network byte order.¶
In the unlikely event that this code space is ever exhausted, allocation of a new UDF type code will be required.¶
The following key uses are specified:¶
Code | Algorithm | Description |
---|---|---|
0 | Any | Any |
1 | Encryption | Encryption |
2 | Signature | Signature |
3 | Authentication | Authentication |
Two types of key type are defined: Explicit and Generic.¶
Explicit key types specify a public key cryptographic algorithm and all the parameters required to generate a key pair. Generic key types are used to specify a type of key but not the algorithm which MUST be specified when the key is generated.¶
Derivation of key pairs for the following algorithms is specified in this document:¶
Code | Algorithm | Description |
---|---|---|
0 | Any | Seed MAY be used to generate keypairs for any algorithm |
1 | X25519 | X25519 keypair as described in RFC7748 |
2 | X448 | X448 keypair as described in RFC7748 |
3 | Ed25519 | Ed25519 keypair as described in RFC8032 |
4 | Ed448 | Ed448 keypair as described in RFC8032 |
5 | P256 | NIST curve P-256 |
6 | P384 | NIST curve P-384 |
7 | P521 | NIST curve P-521 |
8 | RSA2048 | 2048 bit RSA keypair |
9 | RSA3072 | 3072 bit RSA keypair |
10 | RSA4096 | 4096 bit RSA keypair |
11 | RSA6144 | 6144 bit RSA keypair |
12 | RSA8192 | 8192 bit RSA keypair |
13 | RSA15360 | 15360 bit RSA keypair |
14 | MLKEM512 | ML-KEM 512 as described in FIPS 203 |
15 | MLKEM768 | ML-KEM-768 as described in FIPS 203 |
16 | MLKEM1024 | ML-KEM-1024 as described in FIPS 203 |
17 | MLDSA44 | ML-DSA-44 as described in FIPS 204 |
18 | MLDSA65 | ML-DSA-65 as described in FIPS 204 |
19 | MLDSA87 | ML-DSA-87 as described in FIPS 204 |
17-255 | ReservedIetf | Reserved for IETF recommended algorithms |
256 | MeshProfileDevice | Mesh device profile |
257 | MeshActivationDevice | Mesh device activation |
258 | MeshProfileAccount | Mesh account account |
259 | MeshActivationAccount | Mesh account activation |
260 | MeshProfileService | Mesh service profile |
261 | MeshActivationService | Mesh host activation |
262-511 | ReservedMesh | Reserved for future Mesh use |
The key parameter derivation function takes as inputs, the UDF seed value seed
, the parameter identifier param
and an optional string specifying a key name keyname
.¶
KeyParam (seed, param, keyname)¶
The value param is an octet sequence determined by the actual key type generated. The first two octets of parm are always equal to the key identifier for the key algorithm and key usage being generated. If the key derivation algorithm requires multiple inputs, additional octets are specified for each of the different inputs required.¶
The HKDF function [RFC5869] is used to derive key pairs for all the algorithms specified in this document. Derivation functions for additional key algorithms MAY use a different function for this purpose provided that it meets the applicable security requirements.¶
The HKDF function is specified as a two-step extract-expand process with an optional non-secret value input at both steps.¶
4.4.1. Extraction step
The HKDF extraction step calculates a PRK value from a salt
and IKM
:¶
HKDF-Extract(salt, IKM) -> PRK¶
The IKM value is the binary presentation of the complete Binary Data Sequence as originally specified. The salt value is null.¶
The output from the extraction step forms the input to the expand step:¶
HKDF-Expand(PRK, info, L) -> OKM¶
The info parameter of the HKDF function is the concatenation of alg
, param
and the UTF8 binary representation of keyname
.¶
info = alg + param + keyname.UTF8()¶
An X25519 key may be derived as follows:¶
Private Key Generator = ZAAA-CDJ5-DHPA-DUUW-WIPQ-UXNC-DSAR-U7A IKM = 00 01 0D 3D 19 DE 01 D2 96 B2 1F 0A 5D A2 1C 81 1A 7C Info = 00 01 PRK = ED EC A0 DA 5E F0 15 7D B2 5A F7 C9 37 77 8F 96 37 C8 CC 3B FC CC F5 3D 1C 0C 39 35 25 3D E6 12 1D 4A 9A 15 15 66 D4 B2 C8 CA 60 2A C4 12 41 A6 DB CA 56 A5 75 70 79 0F 3F 7D E9 A4 79 59 BA 53 OKM = CF C5 37 60 9E 9B A0 84 D2 C1 E3 1D FB AD F9 39 DE C2 61 4C BC 33 41 0B 70 D4 AF 33 32 0E B6 CB Key = C8 C5 37 60 9E 9B A0 84 D2 C1 E3 1D FB AD F9 39 DE C2 61 4C BC 33 41 0B 70 D4 AF 33 32 0E B6 4B Public Key Fingerprint = MBAA-AFM2-7STR-HZ6B-X6LO-2RHH-C3YX¶
Derivation of an X448 key:¶
Private Key Generator = ZAAA-FFQA-3LE5-SAHG-E6K6-HOTN-TVLB-K4A OKM = 68 79 A7 D6 A6 2D 06 C5 69 F3 D2 38 68 F7 07 2A E4 F6 3E A3 DF 05 B6 B8 6E FA 11 98 1A 44 76 8E DB 66 00 82 64 7B 07 B1 FE 74 26 86 9F DA 0B EF 2F 52 B8 40 5A E6 F2 72 Key = 68 79 A7 D6 A6 2D 06 C5 69 F3 D2 38 68 F7 07 2A E4 F6 3E A3 DF 05 B6 B8 6E FA 11 98 1A 44 76 8E DB 66 00 82 64 7B 07 B1 FE 74 26 86 9F DA 0B EF 2F 52 B8 40 5A E6 F2 F2 Public Key Fingerprint = MDHU-TLPK-ULU7-TGBX-OFSA-UF3V-FVM3¶
Derivation of an Ed25519 key:¶
Private Key Generator = ZAAA-GZ5N-PSNF-7LMS-QJZN-3O2X-GJXV-X6I OKM = A3 75 2E EB 64 95 2E 7F CF 98 88 0F B0 A5 4E 33 CA 3A 9C A2 66 21 92 36 C6 3A 9A C9 19 89 26 A9 Key = A3 75 2E EB 64 95 2E 7F CF 98 88 0F B0 A5 4E 33 CA 3A 9C A2 66 21 92 36 C6 3A 9A C9 19 89 26 A9 Public Key Fingerprint = MDON-QYXO-ZNJ6-3TAX-QZIZ-SYSF-EW5D¶
Derivation of an Ed448 key:¶
Private Key Generator = ZAAA-ILZB-KTQV-YWUK-FO7E-MQVV-EWPR-UPA OKM = F9 82 8F 36 A1 0C 41 15 A5 D6 4E 8A 47 6E FA E8 65 5E 80 CE AA 73 A6 35 1E F6 AE 6E 4D F2 B8 54 C9 05 61 4E 07 D4 33 3E 6D 7A 3C 8D B3 E7 8E 3A 8A 42 DA C7 97 36 D3 B6 Key = F9 82 8F 36 A1 0C 41 15 A5 D6 4E 8A 47 6E FA E8 65 5E 80 CE AA 73 A6 35 1E F6 AE 6E 4D F2 B8 54 C9 05 61 4E 07 D4 33 3E 6D 7A 3C 8D B3 E7 8E 3A 8A 42 DA C7 97 36 D3 B6 Public Key Fingerprint = MAEU-RSVZ-SDHZ-2U7K-536P-5KEC-LCUG¶
4.4.2. Elliptic Curve Diffie Hellman Key Pairs type 1-4
The generation of key pairs for X25519, X448, Ed25519 and Ed448 is specified in [RFC7748] and [RFC8032]. In each case, the public and private key parameters are generated from a string of random octets whose transformation to the secret scalar function is described in the document.¶
Thus, info is the null string and the value L is specified as follows:¶
Algorithm | L |
---|---|
X25519 | 256 |
X448 | 448 |
Ed25519 | 256 |
Ed448 | 448 |
4.4.3. Elliptic Curve Diffie Hellman Key Pairs type 5-7
The generation of key pairs for the curves P-256, P-384 and P-521 described in [RFC5903] is not mandated by the specification. FIPS 186-4r5 specifies two approaches. A modified form of the mechanism Key Pair Generation Using Extra Random Bits specified in B.4.1 is used as follows:¶
The number of random bits L is given by the following table:¶
Algorithm | L |
---|---|
P-256 | 320 |
P-384 | 448 |
P-521 | 592 |
These numbers are specified in FIPS 186-4r5.¶
The OKM value is interpreted as an integer in Network Byte Order, that is the first byte contains the most significant bits, to yield the parameter c
.¶
The parameter c
is reduced modulo the value of the prime field n
to yield the secret scalar value d:¶
d = (c mod (n?1)) + 1.¶
A P-256 key may be derived as follows:¶
Private Key Generator = ZAAA-LLBO-4A4E-LFMH-EJ73-XVFG-7PZ5-V7Y IKM = 00 05 AC 2E E0 38 45 95 87 22 7F BB D4 A6 FB F3 DA FF Info = 00 05 PRK = 8D 0B DC 97 FB BC 45 DB 78 AE A2 9A FF 73 14 50 B8 CC E7 FD F2 3D 8D 27 6D C8 63 37 51 5C 8E 82 6A 10 CE C6 5F 5F 0C 85 0F E4 C8 27 2E CF 87 6B CB B0 AA 52 E3 26 8F 26 16 CA 76 61 D1 3E B9 0B OKM = 76 F2 A8 D8 6B DD 42 ED BE 7F 3D 8F FD 17 5B FA 9F E0 65 CE D6 1C B9 B7 0F AF EF 05 43 B6 4D F0 68 A2 26 84 30 B0 C8 59 Key = 191605763667500298526613912723297536059242182507169413592645 27980114811592678 Public Key Fingerprint = MB5Y-NIO3-HHHO-SAZS-NZKM-WBDZ-MUGO¶
Derivation of a P-384 key:¶
Private Key Generator = ZAAA-NPLI-G7Z3-WFD2-GBJ6-OONN-ELTO-MHA Key = 263562153835186555492398415999907974190429336371779371513601 10220614461855115463471099487031481746504948869192071231 Public Key Fingerprint = MBXU-YJ4H-H25F-FQSV-T5TP-ZL4V-TFWX¶
Derivation of a P-521 key:¶
Private Key Generator = ZAAA-PQCC-YFVT-LRWP-7MUZ-GJV3-HLX2-JPQ Key = 285278603474502869601933299497808748025671548567167650987170 60737911080322264378141444953784251249111870679097121904 15156000053283570819983763397634449540951 Public Key Fingerprint = MBAE-UZIV-QTVJ-MX4W-2DOI-ZA6M-QYFG¶
4.4.4. RSA Key Pairs
Generation of RSA key pairs requires two parameters, p, q which are prime. FIPS 186-4r5 requires the use of primes constructed with auxilary primes. Since finding random primes by trial and error is a lengthy process, the number of trials required to perform each step of the process can be recorded in a 'hints' structure that can be used to regenerate the private key without the need to repeat the trial and error stage.¶
The method used to compute a probable prime based on auxiliary primes applies the algorithm described in section B9 of FIPS 186-4r5 using primes derived from base values generated using the following tags:¶
Parameter | Tag | UTF8 equivalent string |
---|---|---|
p | [112] | p[i] |
p1 | [112] | p1 |
p2 | [112] | p2 |
q | [113] | q[i] |
q1 | [113] | q1 |
q2 | [113] | q2 |
To generate p, auxiliary primes, p1 and p2 are first generated according to the process described in Appendix C. The lengths of the auxiliary primes are as follows:¶
Algorithm | L |
---|---|
RSA-2048 | 140 |
RSA-3072 | 170 |
RSA-4096 | 200 |
RSA-6144 | 260 |
RSA-8192 | 320 |
RSA-15360 | 530 |
[Note that although FIPS 186-4r5 specifies lengths for RSA keys up to 4096 bits, it does not give values for longer primes. The larger values are extrapolated using the formula 80+30*(length/1024).]¶
The auxiliary primes are then used to derive the prime value following the procedure described in Appendix D.¶
Implementations MAY record the number of additional attempts required to perform each of the iterative steps required to generate the primes and use them to construct a hints string. The hints string MAY be appended to the UDF value as a suffix to allow the private key to be regenerated efficiently without the need to repeat the search.¶
The hints string is constructed as a series of 2, 4, 6 or 8 varints specifying the number of additional attempts required to perform each step of the process. The order of the varints is as follows:¶
Primality tests to generate p¶
Primality tests to generate q¶
Primality tests to generate p1¶
Primality tests to generate q1¶
Primality tests to generate p2¶
Primality tests to generate q2¶
Seeds to generate base for deriving p¶
Seeds to generate base for deriving q¶
An RSA-2048 may be derived as follows:¶
Private Key Generator = ZAAA-RJ5I-OSMI-X2KH-MBHX-KUPB-OC54-NQI IKM = 00 08 A7 A8 74 98 8B E9 47 60 4F 75 51 E1 70 BB C6 C1 Info = 00 08 [Generation of the PRK as before] Info(p) = 70 // Rest TBS Public Key Fingerprint = MC3F-GOL3-C2A3-NLSI-EVK3-OEHP-TTOV Hints = TEC2-AAYC-GMFT-SAQC¶
An RSA-3072 may be derived as follows:¶
Private Key Generator = ZAAA-TRZW-THS7-KXE6-2L3G-JAUK-VMDR-MOY Public Key Fingerprint = MDWW-4LGC-FL3I-PA6M-TJT6-OTHY-CP6A Hints = VICL-YAIJ-A5DR-EBYB¶
An RSA-4096 may be derived as follows:¶
Private Key Generator = ZAAA-VMJY-JTS6-EXFD-ZBUI-UP3Z-CPCU-WFA Public Key Fingerprint = MCAO-OK3H-CC37-AMMQ-D5QL-U5IN-IFMI Hints = A3WQ-EFWG-ANOA-GBID¶
4.4.5. Any Key Algorithm
The Any key algorithm allows a single UDF value to be used to derive key pairs for multiple algorithms. The IKM value is the same for each key pair derived. The salt value is changed according to the algorithm for which the key is to be derived.¶
Fingerprint = ZAAA-A6WP-XMGW-FUOF-2T5L-AHNL-FBPY-RSY To generate an RSA-2048 key Info = 00 08 // Rest TBS To generate an X25519 key Info = 00 08 Key = 7F 9F D5 70 DA 71 03 86 43 8D 2E 91 E5 CC 24 B4 1F 9D 95 01 2C 84 8A A3 58 B5 57 D1 05 34 71 E8¶
5. Variable Length UDFs
Variable length UDFs are used to represent fingerprint values calculated over a content type identifier and the cryptographic digest of a content data item. The fingerprint value MAY be specified at any integer multiple of 20 bits that provides a work factor sufficient for the intended purpose.¶
Two types of fingerprint are specified:¶
- Digest fingerprints
-
Are computed with the same cryptographic digest algorithm used to calculate the digest of the content data.¶
- Message Authentication Code fingerprints
-
Are computed using a Message Authentication Code.¶
For a given algorithm (and key, if requires), if two UDF fingerprints are of the same content data and content type, either the fingerprint values will be the same or the initial characters of one will be exactly equal to the other.¶
5.1. Content Digest
A Content Digest Type UDF consists of the type identifier octet followed by the Binary Data Sequence value.¶
The type identifier specifies the digest algorithm used and the compression level. Two digest algorithms are currently specified with four compression levels for each making a total of eight possible type identifiers.¶
The Content Digest UDF for given content data is generated by the steps of:¶
- Applying the digest algorithm to determine the Content Digest Value¶
- Applying the digest algorithm to determine the Typed Content Digest Value¶
- Determining the compression level from bytes 0-3 of the Typed Content Digest Value.¶
- Determining the Type Identifier octet from the Digest algorithm identifier and compression level.¶
- Truncating bytes 4-63 of the Typed Content Digest Value to determine the Binary Data Sequence value.¶
5.1.1. Content Digest Value
The Content Digest Value (CDV) is determined by applying the digest algorithm to the content data:¶
CDV = H(<Data>)¶
Where¶
5.1.2. Typed Content Digest Value
The Typed Content Digest Value (TCDV) is determined by applying the digest algorithm to the content type identifier and the CDV:¶
TCDV = H (<Content-ID> + ?:? + CDV)¶
Where¶
-
A + B represents concatenation of the binary sequences A and B.¶
<Content-ID> is the IANA Content Type of the data in UTF8 encoding¶
The two-step approach to calculating the Type Content Digest Value allows an application to attempt to match a set of content data against multiple types without the need to recalculate the value of the content data digest.¶
5.1.3. Content Digest Compression
The compression factor is determined according to the number of trailing zero bits in the first 8 bytes of the Typed Content Digest Value as follows:¶
- 19 or fewer trailing zero bits
-
Compression factor = 0¶
- 29 or fewer trailing zero bits
-
Compression factor = 20¶
- 39 or fewer trailing zero bits
-
Compression factor = 30¶
- 49 or fewer trailing zero bits
-
Compression factor = 40¶
- 50 or more trailing zero bits
-
Compression factor = 50¶
The least significant bits of each octet are regarded to be 'trailing'.¶
Applications MUST use compression when creating and comparing UDFs. Applications MAY support content generation techniques that search for UDF values that use a compressed representation. Presentation of a content digest value indicating use of compression MAY be used as an indicator of 'proof of work'.¶
5.1.4. Content Digest Presentation
The type identifier is determined by the algorithm and compression factor as specified above.¶
The Binary Data Sequence value is taken from the Typed Content Digest Value starting at the 9th octet and as many additional bytes as are required to meet the presentation precision.¶
5.1.5. Example Encoding
In the following examples, <Content-ID> is the UTF8 encoding of the string "text/plain" and <Data> is the UTF8 encoding of the string "UDF Data Value"¶
Data = 55 44 46 20 44 61 74 61 20 56 61 6C 75 65 ContentType = 74 65 78 74 2F 70 6C 61 69 6E¶
5.1.6. Using SHA-2-512 Digest
H(<Data>) = 48 DA 47 CC AB FE A4 5C 76 61 D3 21 BA 34 3E 58 10 87 2A 03 B4 02 9D AB 84 7C CE D2 22 B6 9C AB 02 38 D4 E9 1E 2F 6B 36 A0 9E ED 11 09 8A EA AC 99 D9 E0 BD EA 47 93 15 BD 7A E9 E1 2E AD C4 15 <Content-ID> + ':' + H(<Data>) = 74 65 78 74 2F 70 6C 61 69 6E 3A 48 DA 47 CC AB FE A4 5C 76 61 D3 21 BA 34 3E 58 10 87 2A 03 B4 02 9D AB 84 7C CE D2 22 B6 9C AB 02 38 D4 E9 1E 2F 6B 36 A0 9E ED 11 09 8A EA AC 99 D9 E0 BD EA 47 93 15 BD 7A E9 E1 2E AD C4 15 H(<Content-ID> + ':' + H(<Data>)) = C6 AF B7 C0 FE BE 04 E5 AE 94 E3 7B AA 5F 1A 40 5B A3 CE CC 97 4D 55 C0 9E 61 E4 B0 EF 9C AE F9 EB 83 BB 9D 5F 0F 39 F6 5F AA 06 DC 67 2A 67 71 4F FF 8F 83 C4 55 38 36 38 AE 42 7A 82 9C 85 BB The prefixed Binary Data Sequence is thus 60 C6 AF B7 C0 FE BE 04 E5 AE 94 E3 7B AA 5F 1A 40 5B A3 CE CC 97 4D 55 C0 9E 61 E4 B0 EF 9C AE F9 EB 83 BB 9D 5F 0F 39 F6 5F AA 06 DC 67 2A 67 71 4F FF 8F 83 C4 55 38 36 38 AE 42 7A 82 9C 85 BB¶
The 125 bit fingerprint value is MDDK-7N6A-727A-JZNO-STRX-XKS7-DJAF¶
This fingerprint MAY be specified with higher or lower precision as appropriate.¶
5.1.7. Using SHA-3-512 Digest
H(<Data>) = 6D 2E CF E6 93 5A 0C FC F2 A9 1A 49 E0 0C D8 07 A1 4E 70 AB 72 94 6E CC BB 47 48 F1 8E 41 49 95 07 1D F3 6E 0D 0C 8B 60 39 C1 8E B4 0F 6E C8 08 65 B4 C4 45 9B A2 7E 97 74 7B BE 68 BC A8 C2 17 <Content-ID> + ':' + H(<Data>) = 74 65 78 74 2F 70 6C 61 69 6E 3A 6D 2E CF E6 93 5A 0C FC F2 A9 1A 49 E0 0C D8 07 A1 4E 70 AB 72 94 6E CC BB 47 48 F1 8E 41 49 95 07 1D F3 6E 0D 0C 8B 60 39 C1 8E B4 0F 6E C8 08 65 B4 C4 45 9B A2 7E 97 74 7B BE 68 BC A8 C2 17 H(<Content-ID> + ':' + H(<Data>)) = 8A 86 8A 06 1C 54 6E 7E 3F 75 5F 39 88 F9 FD 2F 8E C8 45 93 1B 80 A8 2F 29 16 7B A3 BE 21 1F 8A 75 61 88 A1 D5 7F 07 D5 9D 68 A4 2D 17 F4 4D 23 F9 E4 0B B2 1A 8D B9 F5 8D FC EC BD 01 F4 37 7C The prefixed Binary Data Sequence is thus 50 8A 86 8A 06 1C 54 6E 7E 3F 75 5F 39 88 F9 FD 2F 8E C8 45 93 1B 80 A8 2F 29 16 7B A3 BE 21 1F 8A 75 61 88 A1 D5 7F 07 D5 9D 68 A4 2D 17 F4 4D 23 F9 E4 0B B2 1A 8D B9 F5 8D FC EC BD 01 F4 37 7C¶
The 125 bit fingerprint value is KCFI-NCQG-DRKG-47R7-OVPT-TCHZ-7UXY¶
5.1.8. Using SHA-2-512 Digest with Compression
The content data "UDF Compressed Document 4187123" produces a UDF Content Digest SHA-2-512 binary value with 20 trailing zeros and is therefore presented using compressed presentation:¶
Data = " 55 44 46 20 43 6F 6D 70 72 65 73 73 65 64 20 44 6F 63 75 6D 65 6E 74 20 34 31 38 37 31 32 33"¶
The UTF8 Content Digest is given as:¶
H(<Data>) = 36 21 FA 2A C5 D8 62 5C 2D 0B 45 FB 65 93 FC 69 C1 ED F7 00 AE 6F E3 3D 38 13 FE AB 76 AA 74 13 6D 5A 2B 20 DE D6 A5 CF 6C 04 E6 56 3F F3 C0 C7 C4 1D 3F 43 DD DC F1 A5 67 A7 E0 67 9A B0 C6 B7 <Content-ID> + ':' + H(<Data>) = 74 65 78 74 2F 70 6C 61 69 6E 3A 36 21 FA 2A C5 D8 62 5C 2D 0B 45 FB 65 93 FC 69 C1 ED F7 00 AE 6F E3 3D 38 13 FE AB 76 AA 74 13 6D 5A 2B 20 DE D6 A5 CF 6C 04 E6 56 3F F3 C0 C7 C4 1D 3F 43 DD DC F1 A5 67 A7 E0 67 9A B0 C6 B7 H(<Content-ID> + ':' + H(<Data>)) = 8E 14 D9 19 4E D6 02 12 C3 30 A7 BB 5F C7 17 6D AE 9A 56 7C A8 2A 23 1F 96 75 ED 53 10 EC E8 F2 60 14 24 D0 C8 BC 55 3D C0 70 F7 5E 86 38 1A 0B CB 55 9C B2 87 81 27 FF 3C EC E2 F0 90 A0 00 00 The prefixed Binary Data Sequence is thus 61 8E 14 D9 19 4E D6 02 12 C3 30 A7 BB 5F C7 17 6D AE 9A 56 7C A8 2A 23 1F 96 75 ED 53 10 EC E8 F2 60 14 24 D0 C8 BC 55 3D C0 70 F7 5E 86 38 1A 0B CB 55 9C B2 87 81 27 FF 3C EC E2 F0 90 A0 00 00¶
The 125 bit fingerprint value is MGHB-JWIZ-J3LA-EEWD-GCT3-WX6H-C5W2¶
5.1.9. Using SHA-3-512 Digest with Compression
The content data "UDF Compressed Document 774665" produces a UDF Content Digest SHA-3-512 binary value with 20 trailing zeros and is therefore presented using compressed presentation:¶
Data = 55 44 46 20 43 6F 6D 70 72 65 73 73 65 64 20 44 6F 63 75 6D 65 6E 74 20 37 37 34 36 36 35¶
The UTF8 SHA-3-512 Content Digest is KEJI-Y225-BDUG-XX22-MXKE-5ITF-YVYM¶
5.2. Authenticator UDF
An authenticator Type UDF consists of the type identifier octet followed by the Binary Data Sequence value.¶
The type identifier specifies the digest and Message Authentication Code algorithm. Two algorithm suites are currently specified. Use of compression is not supported.¶
The Authenticator UDF for given content data and key is generated by the steps of:¶
- Applying the digest algorithm to determine the Content Digest Value¶
- Applying the MAC algorithm to determine the Authentication value¶
- Determining the Type Identifier octet from the Digest algorithm identifier and compression level.¶
- Truncating the Authentication value to determine the Binary Data Sequence value.¶
The key used to calculate and Authenticator type UDF is always a UNICODE string. If use of a binary value as a key is required, the value MUST be converted to a string format first. For example, by conversion to an Encryption/Authentication type UDF.¶
5.2.1. Authentication Content Digest Value
The Content Digest Value (CDV) is determined in the exact same fashion as for a Content Digest UDF by applying the digest algorithm to the content data:¶
CDV = H(<Data>))¶
Where¶
5.2.2. Authentication Value
The Authentication Value (AV) is determined by applying the digest algorithm to the content type identifier and the CDV:¶
AV = MAC (<OKM>, (<Content-ID> + ?:? + CDV))¶
Where¶
-
<OKM> is the authentication key as specified below¶
MAC( <Key>, <data>) is the result of applying the Message Authentication Code algorithm to with Key <Key> and data <data>¶
The value <OKM> is calculated as follows:¶
IKM = UTF8 (Key) PRK = MAC (UTF8 ("KeyedUDFMaster"), IKM) OKM = HKDF-Expand(PRK, UTF8 ("KeyedUDFExpand"), HashLen)¶
Where the function UTF8(string) converts a string to the binary UTF8 representation, HKDF-Expand is as defined in [RFC5869] and the function MAC(k,m) is the HMAC function formed from the specified hash H(m) as specified in [RFC2014].¶
Keyed UDFs are typically used in circumstances where user interaction requires a cryptographic commitment type functionality¶
In the following example, <Content-ID> is the UTF8 encoding of the string "text/plain" and <Data> is the UTF8 encoding of the string "Konrad is the traitor". The randomly chosen key is NDD7-6CMX-H2FW-ISAL-K4VB-DQ3E-PEDM.¶
Data = 4B 6F 6E 72 61 64 20 69 73 20 74 68 65 20 74 72 61 69 74 6F 72 ContentType = 74 65 78 74 2F 70 6C 61 69 6E Key = 4E 44 44 37 2D 36 43 4D 58 2D 48 32 46 57 2D 49 53 41 4C 2D 4B 34 56 42 2D 44 51 33 45 2D 50 45 44 4D¶
Processing is performed in the same manner as an unkeyed fingerprint except that compression is never used:¶
H(<Data>) = 93 FC DA F9 FA FD 1E 26 50 26 C3 C1 28 43 40 73 D8 BC 3D 62 87 73 2B 73 B8 EC 93 B6 DE 80 FF DA 70 0A D1 CE E8 F4 36 68 EF 4E 71 63 41 53 91 5C CE 8C 5C CE C7 9A 46 94 6A 35 79 F9 33 70 85 01 <Content-ID> + ':' + H(<Data>) = 74 65 78 74 2F 70 6C 61 69 6E 3A 93 FC DA F9 FA FD 1E 26 50 26 C3 C1 28 43 40 73 D8 BC 3D 62 87 73 2B 73 B8 EC 93 B6 DE 80 FF DA 70 0A D1 CE E8 F4 36 68 EF 4E 71 63 41 53 91 5C CE 8C 5C CE C7 9A 46 94 6A 35 79 F9 33 70 85 01 PRK(Key) = 77 D3 0A 08 39 BD 9D C0 97 44 DA 33 15 0A 42 5E CD 17 80 03 B3 CF CC 89 7A C7 84 12 B4 51 5B 25 DC 26 F5 E1 1B 20 F3 89 2E 9A 1A 7B 0E 73 23 39 0E C3 4C EF 2D 40 DA 05 B4 70 C6 1C 82 C1 49 33 HKDF(Key) = BF A9 B4 58 9C 1D 68 D7 9A B7 11 F6 C8 98 59 14 20 D7 82 67 C5 84 22 E5 A0 F9 93 52 B1 C3 87 EB 05 06 CB C4 E4 D6 E6 EE 1F F0 D4 7A 97 68 5E CE 28 1C CA AF D8 B5 D1 24 4A 71 EC E3 AC B5 D2 04 MAC(<key>, <Content-ID> + ':' + H(<Data>)) = 4C C3 7F D3 F9 9E 52 CF 07 90 74 53 84 65 95 BC 1A 2B A5 D1 68 9D 05 6D 06 C5 CA BF 17 CB E0 49 95 39 57 08 79 C4 E5 49 D3 3A 59 A3 32 05 45 A6 30 26 25 AE 8A F4 47 C6 1F B5 33 7F AD 69 A6 30 The prefixed Binary Data Sequence is thus 00 4C C3 7F D3 F9 9E 52 CF 07 90 74 53 84 65 95 BC 1A 2B A5 D1 68 9D 05 6D 06 C5 CA BF 17 CB E0 49 95 39 57 08 79 C4 E5 49 D3 3A 59 A3 32 05 45 A6 30 26 25 AE 8A F4 47 C6 1F B5 33 7F AD 69 A6 30¶
The 125 bit fingerprint value is ABGM-G76T-7GPF-FTYH-SB2F-HBDF-SW6B¶
5.3. Fingerprint of Fingerprints
A fingerprint of fingerprints has content type application/udf-list
. The digest value is calculated over a sequence of fingerprint entries where each entry consists of a <length>, <value> sequence where value is the binary fingerprint value and length is the length of value in bytes.¶
The SHA-2-512 and SHA-3-512 binary fingerprint values calculated over the data string "UDF Data Value" and content type text/plain earlier can be prefixed with their lengths and concatenated to form a UDF fingerprint list:¶
DataString: UDF Data Value Content-Type: text/plain List = 41 60 C6 AF B7 C0 FE BE 04 E5 AE 94 E3 7B AA 5F 1A 40 5B A3 CE CC 97 4D 55 C0 9E 61 E4 B0 EF 9C AE F9 EB 83 BB 9D 5F 0F 39 F6 5F AA 06 DC 67 2A 67 71 4F FF 8F 83 C4 55 38 36 38 AE 42 7A 82 9C 85 BB 41 50 8A 86 8A 06 1C 54 6E 7E 3F 75 5F 39 88 F9 FD 2F 8E C8 45 93 1B 80 A8 2F 29 16 7B A3 BE 21 1F 8A 75 61 88 A1 D5 7F 07 D5 9D 68 A4 2D 17 F4 4D 23 F9 E4 0B B2 1A 8D B9 F5 8D FC EC BD 01 F4 37 7C¶
The SHA-2-512 fingerprint of the list is thus:¶
DataString: UDF Data Value Content-Type: UdfList Udf = MAHE-AM23-KSLN-UWLR-CYSR-QPCV-VL34¶
5.4. Content Type Values
While a UDF fingerprint MAY be used to identify any form of static data, the use of a UDF fingerprint to identify a public key signature key provides a level of indirection and thus the ability to identify dynamic data. The content types used to identify public keys are thus of particular interest.¶
As described in the security considerations section, the use of fingerprints to identify a bare public key and the use of fingerprints to identify a public key and associated security policy information are quite different.¶
- application/pkix-cert
-
A PKIX Certificate¶
- application/pkix-crl
-
A PKIX CRL¶
- application/pkix-keyinfo
-
Content type identifier for PKIX KeyInfo data type¶
- application/udf-list
-
Content type identifier for list of UDF binary entries¶
- application/pgp-keys
-
Content type identifier for OpenPGP Key¶
- application/dns
-
A DNS resource record in binary format¶
- application/udf-encryption
-
UDF encrypted data¶
- application/udf-lock
-
System file lock.¶
5.4.1. PKIX Certificates and Keys
UDF fingerprints MAY be used to identify PKIX certificates, CRLs and public keys in the ASN.1 encoding used in PKIX certificates.¶
Since PKIX certificates and CLRs contain security policy information, UDF fingerprints used to identify certificates or CRLs SHOULD be presented with a minimum of 200 bits of precision. PKIX applications MUST not accept UDF fingerprints specified with less than 200 bits of precision for purposes of identifying trust anchors.¶
PKIX certificates, keys and related content data are identified by the following content types:¶
- application/pkix-cert
-
A PKIX Certificate¶
- application/pkix-crl
-
A PKIX CRL¶
- application/pkix-keyinfo
-
The SubjectPublicKeyInfo structure defined in the PKIX certificate specification encoded using DER encoding rules.¶
The SubjectPublicKeyInfo structure is defined in [RFC5280] as follows:¶
SubjectPublicKeyInfo ::= SEQUENCE { algorithm AlgorithmIdentifier, subjectPublicKey BIT STRING }¶
This schema results in an identical DER encoding to the OIDInfo
sequence specified in section XXX. The distinction between these productions is that the OIDInfo
schema is intended to be used to encode arbitrary data while the application/pkix-keyinfo content type is only intended to be used to describe public keys.¶
5.4.2. OpenPGP Key
OpenPGPv5 keys and key set content data are identified by the following content type:¶
- application/pgp-keys
-
An OpenPGP key set.¶
6. UDF URIs
The UDF URI scheme describes a means of constructing URIs from a UDF value.¶
Two forms or UDF URI are specified, Name and Locator. In both cases the URI MUST specify the scheme type "UDF
", and a UDF fingerprint and MAY specify a query identifier and/or a fragment identifier.¶
By definition a Locator form URI contains an authority
field which MUST be a DNS domain name. The use of IP address forms for this purpose is not permitted.¶
Name Form URIs allow static content data to be identified without specifying the means by which the content data may be retrieved. Locator form URIs allow static content data or dynamic network resources to be identified and the means of retrieval.¶
The syntax of a UDF URI is a subset of the generic URI syntax specified in [RFC3986]. The use of userinfo and port numbers is not supported and the path part of the uri is a UDF in base32 presentation.¶
URI = "UDF:" udf [ "?" query ] [ "" fragment ] udf = name-form / locator-form name-form = udf-value locator-form = "//" authority "/" udf-value authority = host host = reg-name¶
6.1. Name form URI
Name form UDF URIs provide a means of presenting a UDF value in a context in which a URI form of a name is required without providing a means of resolution.¶
Adding the UDF scheme prefix to a UDF fingerprint does not change the semantics of the fingerprint itself. The semantics of the name result from the context in which it is used.¶
For example, a UDF value of any type MAY be used to give a unique targetNamespace value in an XML Schema [XMLSchema]¶
6.2. Locator form URI
The locator form of an unkeyed UDF URI is resolved by the following steps:¶
- Use DNS Web service discovery to determine the Web Service Endpoint.¶
- Determine the content identifier from the source URI.¶
- Append the content identifier to the Web Service Endpoint as a suffix to form the target URI.¶
- Retrieve content from the Web Service Endpoint by means of a GET method.¶
- Perform post processing as specified by the UDF type.¶
6.2.1. DNS Web service discovery
DNS Web Discovery is performed as specified in [draft-hallambaker-web-service-discovery] for the service mmm-udf
and domain name specified in the URI. For a full description of the discovery mechanism, consult the referenced specification.¶
The use of DNS Web Discovery permits service providers to make full use of the load balancing and service description capabilities afforded by use of DNS SRV and TXT records in accordance with the approach described in [RFC6763].¶
If no SRV or TXT records are specified, DNS Web Discovery specifies that the Web Service Endpoint be the Well Known Service [RFC5785] with the prefix /.well-known/srv/mmm-udf.
¶
6.2.2. Content Identifier
For all UDF types other than Secret Share, the Content Identifier value is the UDF SHA-2-512 Content Digest of the canonical form of the UDF specified in the source URI presented at twice the precision to a maximum of 440 bits.¶
If the UDF is of type Secret Share, the shared secret MUST be recovered before the content identifier can be resolved. The shared secret is then expressed as a UDF of type Encryption/Authentication and the Content Identifier determined as for an Encryption/Authentication type UDF.¶
6.2.3. Target URI
The target URI is formed by appending a slash separator '/' and the Content Identifier value to the Web Service Endpoint.¶
Since the path portion of a URI is case sensitive, the UDF value MUST be specified in upper case and MUST include separator marks.¶
6.2.4. Postprocessing
After retrieving the content data, the resolver MUST perform post processing as indicated by the content type:¶
- Nonce
-
No additional post processing is required.¶
- Content Digest
-
The resolver MUST verify that the content returned matches the UDF fingerprint value.¶
- Authenticator
-
The resolver MUST verify that the content returned matches the UDF fingerprint value.¶
- Encryption/Authentication
-
The content data returned is decrypted and authenticated using the key specified in the UDF value as the initial keying material (see below).¶
- Secret Share (set)
-
The content data returned is decrypted and authenticated using the shared secret as the initial keying material (see below).¶
6.2.5. Decryption and Authentication
The steps performed to decode cryptographically enhanced content data depends on the content type specified in the returned content. Two formats are currently supported:¶
- DARE Envelope format as specified in [draft-hallambaker-mesh-dare]¶
- Cryptographic Message Syntax (CMS) Symmetric Key Package as specified in [RFC6031]¶
6.2.6. QR Presentation
Encoding of a UDF URI as a QR code requires only the characters in alphanumeric encoding, thus achieving compactness with minimal overhead.¶
7. Strong Internet Names
A Strong Internet Name is an Internet address that is bound to a policy governing interpretation of that address by means of a Content Digest type UDF of the policy expressed as a UDF prefixed DNS label within the address itself.¶
The Reserved LDH labels as defined in [RFC5890] that begin with the prefix mm--
are reserved for use as Strong Internet Names. The characters following the prefix are a Content Digest type UDF in Base32 presentation.¶
Since DNS labels are limited to 63 characters, the presentation of the SIN itself is limited to 59 characters and thus 240 bits of precision.¶
8. Security Considerations
This section describes security considerations arising from the use of UDF in general applications.¶
Additional security considerations for use of UDFs in Mesh services and applications are described in the Mesh Security Considerations guide [draft-hallambaker-mesh-security].¶
8.1. Confidentiality
Encrypted locator is a bearer token¶
8.2. Availability
Corruption of a part of a shared secret may prevent recovery¶
8.3. Integrity
Shared secret parts do not contain context information to specify which secret they relate to.¶
8.4. Work Factor and Precision
A given UDF data object has a single fingerprint value that may be presented at different precisions. The shortest legitimate precision with which a UDF fingerprint may be presented has 96 significant bits¶
A UDF fingerprint presents the same work factor as any other cryptographic digest function. The difficulty of finding a second data item that matches a given fingerprint is 2n and the difficulty or finding two data items that have the same fingerprint is 2(n/2). Where n is the precision of the fingerprint.¶
For the algorithms specified in this document, n = 512 and thus the work factor for finding collisions is 2256, a value that is generally considered to be computationally infeasible.¶
Since the use of 512 bit fingerprints is impractical in the type of applications where fingerprints are generally used, truncation is a practical necessity. The longer a fingerprint is, the less likely it is that a user will check every character. It is therefore important to consider carefully whether the security of an application depends on second pre-image resistance or collision resistance.¶
In most fingerprint applications, such as the use of fingerprints to identify public keys, the fact that a malicious party might generate two keys that have the same fingerprint value is a minor concern. Combined with a flawed protocol architecture, such a vulnerability may permit an attacker to construct a document such that the signature will be accepted as valid by some parties but not by others.¶
For example, Alice generates keypairs until two are generated that have the same 100 bit UDF presentation (typically 248 attempts). She registers one keypair with a merchant and the other with her bank. This allows Alice to create a payment instrument that will be accepted as valid by one and rejected by the other.¶
The ability to generate of two PKIX certificates with the same fingerprint and different certificate attributes raises very different and more serious security concerns. For example, an attacker might generate two certificates with the same key and different use constraints. This might allow an attacker to present a highly constrained certificate that does not present a security risk to an application for purposes of gaining approval and an unconstrained certificate to request a malicious action.¶
In general, any use of fingerprints to identify data that has security policy semantics requires the risk of collision attacks to be considered. For this reason, the use of short, 'user friendly' fingerprint presentations (Less than 200 bits) SHOULD only be used for public key values.¶
8.5. Semantic Substitution
Many applications record the fact that a data item is trusted, rather fewer record the circumstances in which the data item is trusted. This results in a semantic substitution vulnerability which an attacker may exploit by presenting the trusted data item in the wrong context.¶
The UDF format provides protection against high level semantic substitution attacks by incorporating the content type into the input to the outermost fingerprint digest function. The work factor for generating a UDF fingerprint that is valid in both contexts is thus the same as the work factor for finding a second preimage in the digest function (2512 for the specified digest algorithms).¶
It is thus infeasible to generate a data item such that some applications will interpret it as a PKIX key and others will accept as an OpenPGP key. While attempting to parse a PKIX key as an OpenPGP key is virtually certain to fail to return the correct key parameters it cannot be assumed that the attempt is guaranteed to fail with an error message.¶
The UDF format does not provide protection against semantic substitution attacks that do not affect the content type.¶
8.6. QR Code Scanning
The act of scanning a QR code SHOULD be considered equivalent to clicking on an unlabeled hypertext link. Since QR codes are scanned in many different contexts, the mere act of scanning a QR code MUST NOT be interpreted as constituting an affirmative acceptance of terms or conditions or as creating an electronic signature.¶
If such semantics are required in the context of an application, these MUST be established by secondary user actions made subsequent to the scanning of the QR code.¶
There is a risk that use of QR codes to automate processes such as payment will lead to abusive practices such as presentation of fraudulent invoices for goods not ordered or delivered. It is therefore important to ensure that such requests are subject to adequate accountability controls.¶
9. IANA Considerations
Registrations are requested in the following registries:¶
- Service Name and Transport Protocol Port Number¶
- well-known URI registry¶
- Uniform Resource Identifier (URI) Schemes¶
- Media Types¶
In addition, the creation of the following registry is requested: Uniform Data Fingerprint Type Identifier Registry.¶
9.1. Protocol Service Name
The following registration is requested in the Service Name and Transport Protocol Port Number Registry in accordance with [RFC6355]¶
- Service Name (REQUIRED)
-
mmm-udf¶
- Transport Protocol(s) (REQUIRED)
-
TCP¶
- Assignee (REQUIRED)
-
Phillip Hallam-Baker, phill@hallambaker.com¶
- Contact (REQUIRED)
-
Phillip Hallam-Baker, phill@hallambaker.com¶
- Description (REQUIRED)
-
mmm-udf is a Web Service protocol that resolves Mathematical Mesh Uniform Data Fingerprints (UDF) to resources. The mmm-udf service name is used in service discovery to identify a Web Service endpoint to perform resolution of a UDF presented in URI locator form.¶
- Reference (REQUIRED)
-
[This document]¶
- Port Number (OPTIONAL)
-
None¶
- Service Code (REQUIRED for DCCP only)
-
None¶
- Known Unauthorized Uses (OPTIONAL)
-
None¶
- Assignment Notes (OPTIONAL)
-
None¶
9.2. Well Known
The following registration is requested in the well-known URI registry in accordance with [RFC5785]¶
9.3. URI Registration
The following registration is requested in the Uniform Resource Identifier (URI) Schemes registry in accordance with [RFC7595]¶
9.4. Media Types Registrations
9.4.1. Media Type: application/pkix-keyinfo
- Type name:
-
application¶
- Subtype name:
-
pkix-keyinfo¶
- Required parameters:
-
None¶
- Optional parameters:
-
None¶
- Encoding considerations:
-
Binary¶
- Security considerations:
-
Described in [This]¶
- Interoperability considerations:
-
None¶
- Published specification:
-
[This]¶
- Applications that use this media type:
-
Uniform Data Fingerprint¶
- Fragment identifier considerations:
-
None¶
- Additional information:
-
Deprecated alias names for this type: None¶
Magic number(s): None¶
File extension(s): None¶
Macintosh file type code(s): None¶
- Person & email address to contact for further information:
-
Phillip Hallam-Baker @hallambaker.com>¶
- Intended usage:
-
Content type identifier to be used in constructing UDF Content Digests and Authenticators and related cryptographic purposes.¶
- Restrictions on usage:
-
None¶
- Author:
-
Phillip Hallam-Baker¶
- Change controller:
-
Phillip Hallam-Baker¶
- Provisional registration? (standards tree only):
-
Yes¶
9.4.2. Media Type: application/udf
- Type name:
-
application¶
- Subtype name:
-
udf¶
- Required parameters:
-
None¶
- Optional parameters:
-
None¶
- Encoding considerations:
-
None¶
- Security considerations:
-
Described in [This]¶
- Interoperability considerations:
-
None¶
- Published specification:
-
[This]¶
- Applications that use this media type:
-
Uniform Data Fingerprint¶
- Fragment identifier considerations:
-
None¶
- Additional information:
-
Deprecated alias names for this type: None¶
Magic number(s): None¶
File extension(s): None¶
Macintosh file type code(s): None¶
- Person & email address to contact for further information:
-
Phillip Hallam-Baker @hallambaker.com>¶
- Intended usage:
-
Content type identifier to be used in constructing UDF Content Digests and Authenticators and related cryptographic purposes.¶
- Restrictions on usage:
-
None¶
- Author:
-
Phillip Hallam-Baker¶
- Change controller:
-
Phillip Hallam-Baker¶
- Provisional registration? (standards tree only):
-
Yes¶
9.5. Uniform Data Fingerprint Type Identifier Registry
This document describes a new extensible data format employing fixed length version identifiers for UDF types.¶
9.5.1. The name of the registry
Uniform Data Fingerprint Type Identifier Registry¶
9.5.2. Required information for registrations
Registrants must specify the Type identifier code(s) requested, description and RFC number for the corresponding standards action document.¶
The standards document must specify the means of generating and interpreting the UDF Data Sequence Value and the purpose(s) for which it is proposed.¶
Since the initial letter of the Base32 presentation provides a mnemonic function in UDFs, the standards document must explain why the proposed Type Identifier and associated initial letter are appropriate. In cases where a new initial letter is to be created, there must be an explanation of why this is appropriate. If an existing initial letter is to be created, there must be an explanation of why this is appropriate and/or acceptable.¶
9.5.3. Applicable registration policy
Due to the intended field of use (human data entry), the code space is severely constrained. Accordingly, it is intended that code point registrations be as infrequent as possible.¶
Registration of new digest algorithms is strongly discouraged and should not occur unless, (1) there is a known security vulnerability in one of the two schemes specified in the original assignment and (2) the proposed algorithm has been subjected to rigorous peer review, preferably in the form of an open, international competition and (3) the proposed algorithm has been adopted as a preferred algorithm for use in IETF protocols.¶
Accordingly, the applicable registration policy is Standards Action.¶
9.5.4. Size, format, and syntax of registry entries
Each registry entry consists of a single byte code,¶
9.5.5. Initial assignments and reservations
The following entries should be added to the registry as initial assignments:¶
Code Description Reference ---- ---------------------------------------- --------- 0 HMAC_SHA_2_512 [This document] 1 HMAC_SHA_3_512 [This document] 32 HKDF_AES_512 [This document] 33 HKDF_AES_512 [This document] 80 SHA_3_512 [This document] 81 SHA_3_512 (20 compressed) [This document] 82 SHA_3_512 (30 compressed) [This document] 83 SHA_3_512 (40 compressed) [This document] 84 SHA_3_512 (50 compressed) [This document] 96 SHA_2_512 [This document] 97 SHA_2_512 (20 compressed) [This document] 98 SHA_2_512 (30 compressed) [This document] 99 SHA_2_512 (40 compressed) [This document] 100 SHA_2_512 (50 compressed) [This document] 104 Nonce Data [This document] 112 OID distinguished sequence (DER encoded) [This document] 144 Shamir Secret Share [This document] 200 Secret seed [This document]¶
10. Acknowledgements
A list of people who have contributed to the design of the Mesh is presented in [draft-hallambaker-mesh-architecture].¶
Thanks are due to Viktor Dukhovni, Damian Weber and an anonymous member of the cryptography@metzdowd.com list for assisting in the compilation of the table of prime values.¶
11. Appendix A: Prime Values for Secret Sharing
The following are the prime values to be used for sharing secrets of up to 512 bits.¶
If it is necessary to share larger secrets, the corresponding prime may be found by choosing a value (28)n that is larger than the secret to be encoded and determining the next largest number that is prime.¶
Bytes | Bits | Prime |
---|---|---|
1 | 8 | 2^8+1 |
2 | 16 | 2^16+1 |
3 | 24 | 2^24+43 |
4 | 32 | 2^32+15 |
5 | 40 | 2^40+15 |
6 | 48 | 2^48+21 |
7 | 56 | 2^56+81 |
8 | 64 | 2^64+13 |
9 | 72 | 2^72+15 |
10 | 80 | 2^80+13 |
11 | 88 | 2^88+7 |
12 | 96 | 2^96+61 |
13 | 104 | 2^104+111 |
14 | 112 | 2^112+25 |
15 | 120 | 2^120+451 |
16 | 128 | 2^128+51 |
17 | 136 | 2^136+85 |
18 | 144 | 2^144+175 |
19 | 152 | 2^152+253 |
20 | 160 | 2^160+7 |
21 | 168 | 2^168+87 |
22 | 176 | 2^176+427 |
23 | 184 | 2^184+27 |
24 | 192 | 2^192+133 |
25 | 200 | 2^200+235 |
26 | 208 | 2^208+375 |
27 | 216 | 2^216+423 |
28 | 224 | 2^224+735 |
29 | 232 | 2^232+357 |
30 | 240 | 2^240+115 |
31 | 248 | 2^248+81 |
32 | 256 | 2^256+297 |
33 | 264 | 2^264+175 |
34 | 272 | 2^272+57 |
35 | 280 | 2^280+45 |
36 | 288 | 2^288+127 |
37 | 296 | 2^296+61 |
38 | 304 | 2^304+37 |
39 | 312 | 2^312+91 |
40 | 320 | 2^320+27 |
41 | 328 | 2^328+15 |
42 | 336 | 2^336+241 |
43 | 344 | 2^344+231 |
44 | 352 | 2^352+55 |
45 | 360 | 2^360+105 |
46 | 368 | 2^368+127 |
47 | 376 | 2^376+115 |
48 | 384 | 2^384+231 |
49 | 392 | 2^392+207 |
50 | 400 | 2^400+181 |
51 | 408 | 2^408+37 |
52 | 416 | 2^416+235 |
53 | 424 | 2^424+163 |
54 | 432 | 2^432+1093 |
55 | 440 | 2^440+187 |
56 | 448 | 2^448+211 |
57 | 456 | 2^456+21 |
58 | 464 | 2^464+841 |
59 | 472 | 2^472+445 |
60 | 480 | 2^480+165 |
61 | 488 | 2^488+777 |
62 | 496 | 2^496+583 |
63 | 504 | 2^504+133 |
64 | 512 | 2^512+75 |
For example, the prime to be used to share a 128 bit value is 2128 + 51.¶
13. Appendix C: Generation of auxiliary Primes
The method used to compute the auxiliary primes is described in FIPS 186-4r5.¶
Each auxiliary prime is generated by first calculating an initial candidate value x by generating a random bit string of the specified length from the seed using the corresponding tag, setting the most significant bits to zero to trim it to the exact length specified and converting the result to an integer in big-endian format.¶
The prime value y is the first odd integer >= x that is prime.¶
If a hint h, is provided, the prime y is the first odd integer >= x + 2h.¶
14. Appendix D: Prime Generation with auxiliary Primes
The method used to compute a probable prime based on auxiliary primes is described in section B9 of FIPS 186-4r5.¶
Generation of the probable prime factor is performed in the same fashion except that there are two iteration points, the first to find a value x meeting the criteria x 2nlen/2, the second to find a prime y = x + n*modulo.¶
Selection of the value x is performed by making repeated trials of the seed generator with different tag values on each call. For p the tag values are p0, p1, p2, etc.¶
Note that this algorithm does not mandate a particular method of primality testing.¶
15. Normative References
- [draft-hallambaker-mesh-architecture]
- Hallam-Baker, P., "Mathematical Mesh 3.0 Part I: Architecture Guide", Work in Progress, Internet-Draft, draft-hallambaker-mesh-architecture-22, , <https://datatracker.ietf.org/doc/html/draft-hallambaker-mesh-architecture-22>.
- [draft-hallambaker-mesh-dare]
- Hallam-Baker, P., "Mathematical Mesh 3.0 Part III : Data At Rest Encryption (DARE)", Work in Progress, Internet-Draft, draft-hallambaker-mesh-dare-17, , <https://datatracker.ietf.org/doc/html/draft-hallambaker-mesh-dare-17>.
- [draft-hallambaker-mesh-security]
- Hallam-Baker, P., "Mathematical Mesh 3.0 Part IX Security Considerations", Work in Progress, Internet-Draft, draft-hallambaker-mesh-security-09, , <https://datatracker.ietf.org/doc/html/draft-hallambaker-mesh-security-09>.
- [draft-hallambaker-web-service-discovery]
- Hallam-Baker, P., "DNS Web Service Discovery", Work in Progress, Internet-Draft, draft-hallambaker-web-service-discovery-09, , <https://datatracker.ietf.org/doc/html/draft-hallambaker-web-service-discovery-09>.
- [RFC2014]
- Weinrib, A. and J. Postel, "IRTF Research Group Guidelines and Procedures", BCP 8, RFC 2014, DOI 10.17487/RFC2014, , <https://www.rfc-editor.org/rfc/rfc2014>.
- [RFC2119]
- Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
- [RFC3986]
- Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, , <https://www.rfc-editor.org/rfc/rfc3986>.
- [RFC4648]
- Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, , <https://www.rfc-editor.org/rfc/rfc4648>.
- [RFC5280]
- Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, , <https://www.rfc-editor.org/rfc/rfc5280>.
- [RFC5869]
- Krawczyk, H. and P. Eronen, "HMAC-based Extract-and-Expand Key Derivation Function (HKDF)", RFC 5869, DOI 10.17487/RFC5869, , <https://www.rfc-editor.org/rfc/rfc5869>.
- [RFC5903]
- Fu, D. and J. Solinas, "Elliptic Curve Groups modulo a Prime (ECP Groups) for IKE and IKEv2", RFC 5903, DOI 10.17487/RFC5903, , <https://www.rfc-editor.org/rfc/rfc5903>.
- [RFC6031]
- Turner, S. and R. Housley, "Cryptographic Message Syntax (CMS) Symmetric Key Package Content Type", RFC 6031, DOI 10.17487/RFC6031, , <https://www.rfc-editor.org/rfc/rfc6031>.
- [RFC7748]
- Langley, A., Hamburg, M., and S. Turner, "Elliptic Curves for Security", RFC 7748, DOI 10.17487/RFC7748, , <https://www.rfc-editor.org/rfc/rfc7748>.
- [RFC8032]
- Josefsson, S. and I. Liusvaara, "Edwards-Curve Digital Signature Algorithm (EdDSA)", RFC 8032, DOI 10.17487/RFC8032, , <https://www.rfc-editor.org/rfc/rfc8032>.
- [SHA-2]
- NIST, "Secure Hash Standard", .
- [SHA-3]
- Dworkin, M. J., "SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions", .
16. Informative References
- [draft-hallambaker-mesh-developer]
- Hallam-Baker, P., "Mathematical Mesh: Reference Implementation", Work in Progress, Internet-Draft, draft-hallambaker-mesh-developer-11, , <https://datatracker.ietf.org/doc/html/draft-hallambaker-mesh-developer-11>.
- [draft-hallambaker-mesh-trust]
- Hallam-Baker, P., "Mathematical Mesh 3.0 Part X: The Trust Mesh", Work in Progress, Internet-Draft, draft-hallambaker-mesh-trust-09, , <https://datatracker.ietf.org/doc/html/draft-hallambaker-mesh-trust-09>.
- [RFC4086]
- Eastlake 3rd, D., Schiller, J., and S. Crocker, "Randomness Requirements for Security", BCP 106, RFC 4086, DOI 10.17487/RFC4086, , <https://www.rfc-editor.org/rfc/rfc4086>.
- [RFC4880]
- Callas, J., Donnerhacke, L., Finney, H., Shaw, D., and R. Thayer, "OpenPGP Message Format", RFC 4880, DOI 10.17487/RFC4880, , <https://www.rfc-editor.org/rfc/rfc4880>.
- [RFC5785]
- Nottingham, M. and E. Hammer-Lahav, "Defining Well-Known Uniform Resource Identifiers (URIs)", RFC 5785, DOI 10.17487/RFC5785, , <https://www.rfc-editor.org/rfc/rfc5785>.
- [RFC5890]
- Klensin, J., "Internationalized Domain Names for Applications (IDNA): Definitions and Document Framework", RFC 5890, DOI 10.17487/RFC5890, , <https://www.rfc-editor.org/rfc/rfc5890>.
- [RFC6355]
- Narten, T. and J. Johnson, "Definition of the UUID-Based DHCPv6 Unique Identifier (DUID-UUID)", RFC 6355, DOI 10.17487/RFC6355, , <https://www.rfc-editor.org/rfc/rfc6355>.
- [RFC6763]
- Cheshire, S. and M. Krochmal, "DNS-Based Service Discovery", RFC 6763, DOI 10.17487/RFC6763, , <https://www.rfc-editor.org/rfc/rfc6763>.
- [RFC7595]
- Thaler, D., Hansen, T., and T. Hardie, "Guidelines and Registration Procedures for URI Schemes", BCP 35, RFC 7595, DOI 10.17487/RFC7595, , <https://www.rfc-editor.org/rfc/rfc7595>.
- [Shamir79]
- Shamir, A., "How to share a secret.", .
- [XMLSchema]
- Gao, S., Sperberg-McQueen, C. M., Thompson, H. S., Mendelsohn, N., Beech, D., and M. Maloney, "W3C XML Schema Definition Language (XSD) 1.1 Part 1: Structures", .