Network Working Group                                            M. Wahl
INTERNET-DRAFT                                       Critical Angle Inc.
Expires in six months from                                  11 July 1997


         A Summary of the X.500(96) User Schema for use with LDAPv3
                 <draft-ietf-asid-ldapv3schema-x500-01.txt>


1. Status of this Memo

   This document is an Internet-Draft.  Internet-Drafts are working
   documents of the Internet Engineering Task Force (IETF), its areas, and
   its working groups.  Note that other groups may also distribute working
   documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference material
   or to cite them other than as "work in progress."

   To learn the current status of any Internet-Draft, please check the
   "1id-abstracts.txt" listing  contained in the Internet-Drafts Shadow
   Directories on ds.internic.net (US East Coast), nic.nordu.net (Europe),
   ftp.isi.edu (US West Coast), or munnari.oz.au (Pacific Rim).

2. Abstract

   This document provides an overview of the attribute types and object
   classes defined by the ISO and ITU-T committees in the X.500
   documents, in particular those intended for use by directory clients.
   This is the most widely used schema for LDAP/X.500 directories, and
   many other schema definitions for white pages objects use it as a
   basis.  This document does not cover attributes used for the
   administration of X.500 directory servers, nor does it include
   attributes defined by other ISO/ITU-T documents.

3. General Issues

   This document references syntaxes given in section 6 of this document
   and section 6 of [1].  Matching rules are listed in section 8 of this
   document and section 8 of [1].

   The attribute type and object class definitions are written using the
   BNF form of AttributeTypeDescription and ObjectClassDescription given
   in [1].  Lines have been folded for readability.












Wahl                                                         Page 1

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997

4. Source

   The schema definitions in this document are based on those found in
   X.500 [2],[3],[4],[5], and updates to these documents, specifically:

        Sections                Source
        ============            ============
        5.1  - 5.2              X.501(93)
        5.3  - 5.36             X.520(88)
        5.37 - 5.41             X.509(93)
        5.42 - 5.52             X.520(93)
        5.53 - 5.54             X.509(96)
        5.55                    X.520(96)
        6.1                     RFC 1274
        6.2                     (new syntax)
        6.3  - 6.6              RFC 1274
        7.1  - 7.2              X.501(93)
        7.3  - 7.18             X.521(88)
        7.19 - 7.22             X.501(93)
        7.23 - 7.25             X.509(96)
        7.26                    X.521(96)

   Some attribute names are different from those found in X.520(93).

   Three new attributes supportedAlgorithms, deltaRevocationList and
   dmdName, and the objectClass dmd, are defined in the X.500(96)
   documents.

5. Attribute Types

   An LDAP server implementation SHOULD recognize the attribute types
   described in this section.

5.1. objectClass

   The values of the objectClass attribute describe the kind of object
   which an entry represents.  The objectClass attribute is present in
   every entry, with at least two values.  One of the values is either
   "top" or "alias".

    ( 2.5.4.0 NAME 'objectClass' EQUALITY objectIdentifierMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.38' )

5.2. aliasedObjectName

   The aliasedObjectName attribute is used by the directory service if
   the entry containing this attribute is an alias.

    ( 2.5.4.1 NAME 'aliasedObjectName' EQUALITY distinguishedNameMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' SINGLE-VALUE )






Wahl                                                         Page 2

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


5.3. knowledgeInformation

   This attribute is no longer used.

    ( 2.5.4.2 NAME 'knowledgeInformation' EQUALITY caseIgnoreMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{32768}' )

5.4. cn

   This is the X.500 commonName attribute, which contains a name of
   an object.  If the object corresponds to a person, it is typically the
   person's full name.

    ( 2.5.4.3 NAME 'cn' SUP name )

5.5. sn

   This is the X.500 surname attribute, which contains the family name of
   a person.

    ( 2.5.4.4 NAME 'sn' SUP name )

5.6. serialNumber

   This attribute contains the serial number of a device.

    ( 2.5.4.5 NAME 'serialNumber' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.44{64}' )

5.7. c

   This attribute contains a two-letter ISO 3166 country code
   (countryName).

    ( 2.5.4.6 NAME 'c' SUP name SINGLE-VALUE )

5.8. l

   This attribute contains the name of a locality, such as a city,
   county or other geographic region (localityName).

    ( 2.5.4.7 NAME 'l' SUP name )

5.9. st

   This attribute contains the full name of a state or province
   (stateOrProvinceName).

    ( 2.5.4.8 NAME 'st' SUP name )






Wahl                                                         Page 3

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


5.10. street

   This attribute contains the physical address of the object to which
   the entry corresponds, such as an address for package delivery
   (streetAddress).

    ( 2.5.4.9 NAME 'street' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{128}' )

5.11. o

   This attribute contains the name of an organization
   (organizationName).

    ( 2.5.4.10 NAME 'o' SUP name )

5.12. ou

   This attribute contains the name of an organizational unit
   (organizationalUnitName).

    ( 2.5.4.11 NAME 'ou' SUP name )

5.13. title

   This attribute contains the title, such as "Vice President", of a
   person in their organizational context.  The "personalTitle"
   attribute would be used for a person's title independent of their
   job function.

    ( 2.5.4.12 NAME 'title' SUP name )

5.14. description

   This attribute contains a human-readable description of the object.

    ( 2.5.4.13 NAME 'description' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{1024}' )

5.15. searchGuide

   This attribute is for use by X.500 clients in constructing search
   filters. It is obsoleted by enhancedSearchGuide, described below in
   5.48.

    ( 2.5.4.14 NAME 'searchGuide'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.25' )







Wahl                                                         Page 4

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


5.16. businessCategory

   This attribute describes the kind of business performed by an
   organization.

    ( 2.5.4.15 NAME 'businessCategory' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{128}' )

5.17. postalAddress

    ( 2.5.4.16 NAME 'postalAddress' EQUALITY caseIgnoreListMatch
      SUBSTR caseIgnoreListSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.41' )

5.18. postalCode

    ( 2.5.4.17 NAME 'postalCode' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{40}' )

5.19. postOfficeBox

    ( 2.5.4.18 NAME 'postOfficeBox' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{40}' )

5.20. physicalDeliveryOfficeName

    ( 2.5.4.19 NAME 'physicalDeliveryOfficeName' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{128}' )

5.21. telephoneNumber

    ( 2.5.4.20 NAME 'telephoneNumber' EQUALITY telephoneNumberMatch
      SUBSTR telephoneNumberSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.50{32}' )

5.22. telexNumber

    ( 2.5.4.21 NAME 'telexNumber'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.52' )

5.23. teletexTerminalIdentifier

    ( 2.5.4.22 NAME 'teletexTerminalIdentifier'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.51' )

5.24. facsimileTelephoneNumber

    ( 2.5.4.23 NAME 'facsimileTelephoneNumber'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.22' )



Wahl                                                         Page 5

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


5.25. x121Address

    ( 2.5.4.24 NAME 'x121Address' EQUALITY numericStringMatch
      SUBSTR numericStringSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.36{15}' )

5.26. internationaliSDNNumber

    ( 2.5.4.25 NAME 'internationaliSDNNumber' EQUALITY numericStringMatch
      SUBSTR numericStringSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.36{16}' )

5.27. registeredAddress

   This attribute holds a postal address suitable for reception of
   telegrams or expedited documents, where it is necessary to have the
   recipient accept delivery.

    ( 2.5.4.26 NAME 'registeredAddress' SUP postalAddress
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.41' )

5.28. destinationIndicator

   This attribute is used for the telegram service.

    ( 2.5.4.27 NAME 'destinationIndicator' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.44{128}' )

5.29. preferredDeliveryMethod

    ( 2.5.4.28 NAME 'preferredDeliveryMethod'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.14'
      SINGLE-VALUE )

5.30. presentationAddress

   This attribute contains an OSI presentation address.

    ( 2.5.4.29 NAME 'presentationAddress'
      EQUALITY presentationAddressMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.43'
      SINGLE-VALUE )

5.31. supportedApplicationContext

   This attribute contains the identifiers of OSI application contexts.

    ( 2.5.4.30 NAME 'supportedApplicationContext'
      EQUALITY objectIdentifierMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.38' )

5.32. member

    ( 2.5.4.31 NAME 'member' SUP distinguishedName )

Wahl                                                         Page 6

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


5.33. owner

    ( 2.5.4.32 NAME 'owner' SUP distinguishedName )

5.34. roleOccupant

    ( 2.5.4.33 NAME 'roleOccupant' SUP distinguishedName )

5.35. seeAlso

    ( 2.5.4.34 NAME 'seeAlso' SUP distinguishedName )

5.36. userPassword

    ( 2.5.4.35 NAME 'userPassword' EQUALITY octetStringMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.40{128}' )

   Transfer of cleartext passwords are strongly discouraged where the
   underlying transport service cannot guarantee confidentiality and may
   result in disclosure of the password to unauthorized parties.

5.37. userCertificate

   This attribute is to be stored and requested in the binary form, as
   'userCertificate;binary'.

    ( 2.5.4.36 NAME 'userCertificate'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.8' )

5.38. cACertificate

   This attribute is to be stored and requested in the binary form, as
   'cACertificate;binary'.

    ( 2.5.4.37 NAME 'cACertificate'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.8' )

5.39. authorityRevocationList

   This attribute is to be stored and requested in the binary form, as
   'authorityRevocationList;binary'.

    ( 2.5.4.38 NAME 'authorityRevocationList'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.9' )

5.40. certificateRevocationList

   This attribute is to be stored and requested in the binary form, as
   'certificateRevocationList;binary'.

    ( 2.5.4.39 NAME 'certificateRevocationList'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.9' )




Wahl                                                         Page 7

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


5.41. crossCertificatePair

   This attribute is to be stored and requested in the binary form, as
   'crossCertificatePair;binary'.

    ( 2.5.4.40 NAME 'crossCertificatePair'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.10' )

5.42. name

   The name attribute type is the attribute supertype from which string
   attribute types typically used for naming may be formed.  It is
   unlikely that values of this type itself will occur in an entry.
   LDAP server implementations which do not support attribute subtyping
   need not recognize this attribute in requests.   Client
   implementations MUST NOT assume that LDAP servers are capable of
   performing attribute subtyping.

    ( 2.5.4.41 NAME 'name' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{32768}' )

5.43. givenName

   The givenName attribute is used to hold the part of a person's name
   which is not their surname nor middle name.

    ( 2.5.4.42 NAME 'givenName' SUP name )

5.44. initials

   The initials attribute contains the initials of some or all of an
   individuals names, but not the surname(s).

    ( 2.5.4.43 NAME 'initials' SUP name )

5.45. generationQualifier

   The generationQualifier attribute contains the part of the name which
   typically is the suffix, as in "IIIrd".

    ( 2.5.4.44 NAME 'generationQualifier' SUP name )

5.46. x500UniqueIdentifier

   The x500UniqueIdentifier attribute is used to distinguish between
   objects when a distinguished name has been reused.  This is a
   different attribute type from both the "uid" and "uniqueIdentifier"
   types.

    ( 2.5.4.45 NAME 'x500UniqueIdentifier' EQUALITY bitStringMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.6' )




Wahl                                                         Page 8

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


5.47. dnQualifier

   The dnQualifier attribute type specifies disambiguating information to
   add to the relative distinguished name of an entry.  It is intended
   for use when merging data from multiple sources in order to prevent
   conflicts between entries which would otherwise have the same name.
   It is recommended that the value of the dnQualifier attribute be the
   same for all entries from a particular source.

    ( 2.5.4.46 NAME 'dnQualifier' EQUALITY caseIgnoreMatch
      ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.44' )

5.48. enhancedSearchGuide

   This attribute is for use by X.500 clients in constructing search
   filters.

    ( 2.5.4.47 NAME 'enhancedSearchGuide'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.21' )

5.49. protocolInformation

   This attribute is used in conjuction with the presentationAddress
   attribute, to provide additional information to the OSI network
   service.

    ( 2.5.4.48 NAME 'protocolInformation'
      EQUALITY protocolInformationMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.42' )

5.50. distinguishedName

   This attribute type is not used as the name of the object itself, but
   it is instead a base type from which attributes with DN syntax
   inherit.

   It is unlikely that values of this type itself will occur in an entry.
   LDAP server implementations which do not support attribute subtyping
   need not recognize this attribute in requests.   Client
   implementations MUST NOT assume that LDAP servers are capable of
   performing attribute subtyping.

    ( 2.5.4.49 NAME 'distinguishedName' EQUALITY distinguishedNameMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' )

5.51. uniqueMember

    ( 2.5.4.50 NAME 'uniqueMember' EQUALITY uniqueMemberMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.34' )






Wahl                                                         Page 9

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


5.52. houseIdentifier

   This attribute is used to identify a building within a location.

    ( 2.5.4.51 NAME 'houseIdentifier' EQUALITY caseIgnoreMatch
      SUBSTR caseIgnoreSubstringsMatch
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.15{32768}' )

5.53. supportedAlgorithms

   This attribute is to be stored and requested in the binary form, as
   'supportedAlgorithms;binary'.

    ( 2.5.4.52 NAME 'supportedAlgorithms'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.49' )

5.54. deltaRevocationList

   This attribute is to be stored and requested in the binary form, as
   'deltaRevocationList;binary'.

    ( 2.5.4.53 NAME 'deltaRevocationList'
      SYNTAX '1.3.6.1.4.1.1466.115.121.1.9' )

5.55. dmdName

   The value of this attribute specifies a directory management
   domain (DMD), the administrative authority which operates the
   directory server.

    ( 2.5.4.54 NAME 'dmdName' SUP name )

6. Syntaxes

   Servers SHOULD recognize the syntaxes defined in this section.

6.1. Delivery Method

   This syntax has OBJECT IDENTIFIER 1.3.6.1.4.1.1466.115.121.1.14.

   Values in this syntax are encoded according to the following BNF:

      delivery-value = pdm / ( pdm "$" delivery-value )

      pdm = "any" / "mhs" / "physical" / "telex" / "teletex" /
                "g3fax" / "g4fax" / "ia5" / "videotex" / "telephone"

   Example:

      telephone






Wahl                                                         Page 10

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


6.2. Enhanced Guide

   This syntax has OBJECT IDENTIFIER 1.3.6.1.4.1.1466.115.121.1.21.

   Values in this syntax are encoded according to the following BNF:

       EnhancedGuide = objectclass "#" criteria "#" subset

       subset = "baseobject" / "oneLevel" / "wholeSubtree"

   The criteria production is defined in the Guide syntax below.
   This syntax has been added subsequent to RFC 1778.

   Example:

       person#(sn)#oneLevel

6.3. Guide

   This syntax has OBJECT IDENTIFIER 1.3.6.1.4.1.1466.115.121.1.25.

   Values in this syntax are encoded according to the following BNF:

     guide-value = [ object-class "#" ] criteria

     object-class = <an encoded value with OID syntax>

     criteria = criteria-item / criteria-set / ( "!" criteria )

     criteria-set = ( [ "(" ] criteria "&" criteria-set [ ")" ] ) /
                    ( [ "(" ] criteria "|" criteria-set [ ")" ] )

     criteria-item = [ "(" ] attributetype "$" match-type [ ")" ]

     match-type = "EQ" / "SUBSTR" / "GE" / "LE" / "APPROX"

   This syntax should not be used for defining new attributes.

6.4. Password

   This syntax has OBJECT IDENTIFIER 1.3.6.1.4.1.1466.115.121.1.40.

   Values in this syntax are encoded as octet strings.  They are not
   encrypted.

   Example:

      secret








Wahl                                                         Page 11

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


6.5. Teletex Terminal Identifier

   This syntax has OBJECT IDENTIFIER 1.3.6.1.4.1.1466.115.121.1.51.

   Values in this syntax are encoded according to the following BNF:

      teletex-id = ttx-term  0*("$" ttx-param)

      ttx-term   = printablestring

      ttx-param  = ttx-key ":" ttx-value

      ttx-key    = "graphic" / "control" / "misc" / "page" / "private"

      ttx-value  = octetstring

   In the above, the first printablestring is the encoding of the
   first portion of the teletex terminal identifier to be encoded, and
   the subsequent 0 or more octetstrings are subsequent portions
   of the teletex terminal identifier.

6.6. Telex Number

   This syntax has OBJECT IDENTIFIER 1.3.6.1.4.1.1466.115.121.1.52.

   Values in this syntax are encoded according to the following BNF:

      telex-number  = actual-number "$" country "$" answerback

      actual-number = printablestring

      country       = printablestring

      answerback    = printablestring

   In the above, actual-number is the syntactic representation of the
   number portion of the TELEX number being encoded, country is the
   TELEX country code, and answerback is the answerback code of a
   TELEX terminal.

6.7. Supported Algorithm

   This syntax has OBJECT IDENTIFIER 1.3.6.1.4.1.1466.115.121.1.49.

   No printable representation of values of the supportedAlgorithms
   attribute is defined in this document.  Clients which wish to store
   and retrieve this attribute MUST use "supportedAlgorithms;binary", in
   which the value is transferred as a binary encoding.

7. Object Classes

   LDAP servers MUST recognize the object classes "top" and "subschema".
   LDAP servers SHOULD recognize all the other object classes listed here
   as values of the objectClass attribute.


Wahl                                                         Page 12

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


7.1. top

    ( 2.5.6.0 NAME 'top' ABSTRACT MUST objectClass )

7.2. alias

    ( 2.5.6.1 NAME 'alias' SUP top STRUCTURAL MUST aliasedObjectName )

7.3. country

    ( 2.5.6.2 NAME 'country' SUP top STRUCTURAL MUST c
      MAY ( searchGuide $ description ) )

7.4. locality

    ( 2.5.6.3 NAME 'locality' SUP top STRUCTURAL
      MAY ( street $ seeAlso $ searchGuide $ st $ l $ description ) )

7.5. organization

    ( 2.5.6.4 NAME 'organization' SUP top STRUCTURAL MUST o
      MAY ( userPassword $ searchGuide $ seeAlso $ businessCategory $
      x121Address $ registeredAddress $ destinationIndicator $
      preferredDeliveryMethod $ telexNumber $ teletexTerminalIdentifier $
      telephoneNumber $ internationaliSDNNumber $
      facsimileTelephoneNumber $
      street $ postOfficeBox $ postalCode $ postalAddress $
      physicalDeliveryOfficeName $ st $ l $ description ) )

7.6. organizationalUnit

    ( 2.5.6.5 NAME 'organizationalUnit' SUP top STRUCTURAL MUST ou
      MAY ( userPassword $ searchGuide $ seeAlso $ businessCategory $
      x121Address $ registeredAddress $ destinationIndicator $
      preferredDeliveryMethod $ telexNumber $ teletexTerminalIdentifier $
      telephoneNumber $ internationaliSDNNumber $
      facsimileTelephoneNumber $
      street $ postOfficeBox $ postalCode $ postalAddress $
      physicalDeliveryOfficeName $ st $ l $ description ) )

7.7. person

    ( 2.5.6.6 NAME 'person' SUP top STRUCTURAL MUST ( sn $ cn )
      MAY ( userPassword $ telephoneNumber $ seeAlso $ description ) )

7.8. organizationalPerson

    ( 2.5.6.7 NAME 'organizationalPerson' SUP person STRUCTURAL
      MAY ( title $ x121Address $ registeredAddress $
      destinationIndicator $
      preferredDeliveryMethod $ telexNumber $ teletexTerminalIdentifier $
      telephoneNumber $ internationaliSDNNumber $
      facsimileTelephoneNumber $
      street $ postOfficeBox $ postalCode $ postalAddress $
      physicalDeliveryOfficeName $ ou $ st $ l ) )

Wahl                                                         Page 13

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


7.9. organizationalRole

    ( 2.5.6.8 NAME 'organizationalRole' SUP top STRUCTURAL MUST cn
      MAY ( x121Address $ registeredAddress $ destinationIndicator $
      preferredDeliveryMethod $ telexNumber $ teletexTerminalIdentifier $
      telephoneNumber $ internationaliSDNNumber $
      facsimileTelephoneNumber $
      seeAlso $ roleOccupant $ preferredDeliveryMethod $ street $
      postOfficeBox $ postalCode $ postalAddress $
      physicalDeliveryOfficeName $ ou $ st $ l $ description ) )

7.10. groupOfNames

    ( 2.5.6.9 NAME 'groupOfNames' SUP top STRUCTURAL MUST ( member $ cn )
      MAY ( businessCategory $ seeAlso $ owner $ ou $ o $ description ) )

7.11. residentialPerson

    ( 2.5.6.10 NAME 'residentialPerson' SUP person STRUCTURAL MUST l
      MAY ( businessCategory $ x121Address $ registeredAddress $
      destinationIndicator $ preferredDeliveryMethod $ telexNumber $
      teletexTerminalIdentifier $ telephoneNumber $
      internationaliSDNNumber $
      facsimileTelephoneNumber $ preferredDeliveryMethod $ street $
      postOfficeBox $ postalCode $ postalAddress $
      physicalDeliveryOfficeName $ st $ l ) )

7.12. applicationProcess

    ( 2.5.6.11 NAME 'applicationProcess' SUP top STRUCTURAL MUST cn
      MAY ( seeAlso $ ou $ l $ description ) )

7.13. applicationEntity

    ( 2.5.6.12 NAME 'applicationEntity' SUP top STRUCTURAL
      MUST ( presentationAddress $ cn )
      MAY ( supportedApplicationContext $ seeAlso $ ou $ o $ l $
      description ) )

7.14. dSA

    ( 2.5.6.13 NAME 'dSA' SUP applicationEntity STRUCTURAL
      MAY knowledgeInformation )

7.15. device

    ( 2.5.6.14 NAME 'device' SUP top STRUCTURAL MUST cn
      MAY ( serialNumber $ seeAlso $ owner $ ou $ o $ l $ description ) )

7.16. strongAuthenticationUser

    ( 2.5.6.15 NAME 'strongAuthenticationUser' SUP top AUXILIARY
      MUST userCertificate )



Wahl                                                         Page 14

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


7.17. certificationAuthority

    ( 2.5.6.16 NAME 'certificationAuthority' SUP top AUXILIARY
      MUST ( authorityRevocationList $ certificateRevocationList $
      cACertificate ) MAY crossCertificatePair )

7.18. groupOfUniqueNames

    ( 2.5.6.17 NAME 'groupOfUniqueNames' SUP top STRUCTURAL
      MUST ( uniqueMember $ cn )
      MAY ( businessCategory $ seeAlso $ owner $ ou $ o $ description ) )

7.19. subentry

   This object class has special significance for administering X.500(93)
   servers, as described in section 13.2 of X.501 [2].

    ( 2.5.17.0 NAME 'subentry' SUP top STRUCTURAL
      MUST ( cn $ subtreeSpecification ) )

7.20. accessControlSubentry

   This object class has special significance for administering X.500(93)
   servers.  It is used in conjunction with the "subentry" object class.

    ( 2.5.17.1 NAME 'accessControlSubentry' AUXILIARY )

7.21. collectiveAttributeSubentry

   This object class has special significance for administering X.500(93)
   servers.  It is used in conjunction with the "subentry" object class.

    ( 2.5.17.2 NAME 'collectiveAttributeSubentry' AUXILIARY )

7.22. subschema

   This object class is used for the subschema subentry in X.500(93)
   servers.

    ( 2.5.20.1 NAME 'subschema' AUXILIARY
      MAY ( dITStructureRules $ nameForms $ ditContentRules $
      objectClasses $ attributeTypes $ matchingRules $
      matchingRuleUse ) )

7.23. userSecurityInformation

    ( 2.5.6.18 NAME 'userSecurityInformation' SUP top AUXILIARY
      MAY ( supportedAlgorithms ) )

7.24. certificationAuthority-V2

    ( 2.5.6.16.2 NAME 'certificationAuthority-V2' SUP
      certificationAuthority
      AUXILIARY MAY ( deltaRevocationList ) )


Wahl                                                         Page 15

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


7.25. cRLDistributionPoint

    ( 2.5.6.19 NAME 'cRLDistributionPoint' SUP top STRUCTURAL
      MUST ( cn ) MAY ( certificateRevocationList $
      authorityRevocationList $
      deltaRevocationList ) )

7.26. dmd

    ( 2.5.6.20 NAME 'dmd' SUP top STRUCTURAL MUST ( dmdName )
      MAY ( userPassword $ searchGuide $ seeAlso $ businessCategory $
      x121Address $ registeredAddress $ destinationIndicator $
      preferredDeliveryMethod $ telexNumber $ teletexTerminalIdentifier $
      telephoneNumber $ internationaliSDNNumber $
      facsimileTelephoneNumber $
      street $ postOfficeBox $ postalCode $ postalAddress $
      physicalDeliveryOfficeName $ st $ l $ description ) )

8. Matching Rule

   Servers which implement the extensibleMatch filter SHOULD allow
   the matching rule listed in this section to be used in the
   extensibleMatch.  In general these servers SHOULD allow matching
   rules to be used with all attribute types known to the server, when
   the assertion syntax of the matching rule is the same as the value
   syntax of the attribute.

   Servers MAY implement additional matching rules.

   ( 2.5.13.17 NAME 'octetStringMatch'
     SYNTAX '1.3.6.1.4.1.1466.115.121.1.40' )

9. Security Considerations

   Attributes of directory entries are used to provide descriptive
   information about the real-world objects they represent, which can
   be people, organizations or devices.  Most countries have privacy
   laws regarding the publication of information about people.

   Transfer of cleartext passwords are strongly discouraged where the
   underlying transport service cannot guarantee confidentiality and may
   result in disclosure of the password to unauthorized parties.

10. Acknowledgements

   The definitions on which this document have been developed by
   committees for telecommunications and international standards.
   No new schema definitions have been added.  The syntax definitions
   are based on the ISODE "QUIPU" implementation of X.500.

11. Bibliography





Wahl                                                         Page 16

INTERNET-DRAFT  A Summary of the X.500 User Schema For LDAP  March 1997


   [1] M. Wahl, A. Coulbeck, T. Howes, S. Kille, W. Yeong, C. Robbins,
       "Lightweight X.500 Directory Access Protocol Attribute Syntax
       Definitions", INTERNET-DRAFT
       <draft-ietf-asid-ldapv3-attributes-06.txt>, July 1997.

   [2] The Directory: Models. ITU-T Recommendation X.501, 1993.

   [3] The Directory: Authentication Framework. ITU-T Recommendation
       X.509, 1993.

   [4] The Directory: Selected Attribute Types. ITU-T Recommendation
       X.520, 1993.

   [5] The Directory: Selected Object Classes.  ITU-T Recommendation
       X.521, 1993.

12. Author's Address

       Mark Wahl
       Critical Angle Inc.
       4815 West Braker Lane #502-385
       Austin, TX 78759
       USA

       Phone:  +1 512 372 3160
       EMail:  M.Wahl@critical-angle.com






























Wahl                                                         Page 17