Audio/Video Working Group                                    Alan Clark
Internet-Draft                                                 Telchemy
Expires: August 31, 2006                                  Amy Pendleton
                                                                 Nortel
                                                             March 2006


               RTP Control Protocol Extended Reports (RTCP XR)
                 VoIP Metrics Management Information Base
                     draft-ietf-avt-rtcp-xr-mib-04.txt



Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on August 31, 2006.

   This document is a product of the Audio-Visual Transport (AVT)
   working group of the Internet Engineering Task Force. Comments are
   solicited and should be addressed to the working group's mailing
   list at avt@ietf.org and/or the authors.

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it defines objects for managing Real-Time Transport
   Control Protocol Extended Reports (RTCP XR) VoIP Metrics (RFC3611).








Clark             Expires August 2006                         [Page 1]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

Table of Contents

   1. The Network Management Framework .............................  2
   2. Overview .....................................................  3
   2.1 Components ..................................................  3
   2.2 Applicability of the MIB to RTP System Implementations ......  3
   2.3 Relationship to the RTP MIB....................................3
   2.4 Relationship to the RAQMON Architecture......................  3
   2.5 The Structure of the RTCP XR MIB ............................  4
   2.6 Application to multi-party and multicast calls ..............  4
   3 Definitions ...................................................  5
   4. Security Considerations ...................................... 38
   5. IANA Considerations .......................................... 38
   5. Acknowledgements ............................................. 38
   6. Intellectual Property ........................................ 39
   7. Normative References ......................................... 39
   9. Informative References ....................................... 39
   8. Authors' Addresses ........................................... 40
   9. Full Copyright Statement ..................................... 40

1. The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

2. Overview

   An "RTP System" may be a host end-system that runs an application
   program that sends or receives RTP data packets, or it may be an
   intermediate-system that forwards RTP packets.  RTP Control Protocol
   (RTCP) packets are sent by senders and receivers to convey
   information about RTP packet transmission and reception [RFC3550].
   RTCP Extended Report (XR) [RFC3611] packets are sent by receivers
   to convey additional information about certain types of RTP packet
   reception.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119.

2.1 Components

   The RTCP XR MIB is structured around "Session", "Source",
   "Destination" and "Receiver" conceptual abstractions.

Clark             Expires August 2006                         [Page 2]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

   2.1.1  An RTP Session is an association of two or more participants
   communicating with RTP.  For each participant, the session is defined
   by a particular pair of destination transport addresses (one network
   address plus a port pair for RTP and RTCP).  The destination
   transport addresses may be common for all participants, as in the
   case of IP multicast, or may be different for each, as in the case of
   individual unicast addresses plus a common port pair," as defined in
   section 3 of [RFC3550].

   2.1.2 A "Sender" is identified within an RTP session by a 32-bit
   numeric "Synchronization Source," or "SSRC", value and is "...the
   source of a stream of RTP packets" as defined in section 3 of
   [RFC3550].  The sender is also a source of RTCP Sender Report packets
   as specified in section 6 of [RFC3550].

   2.1.3 A "Receiver" of a "stream of RTP packets" can be a unicast or
   multicast Receiver as described in 2.1.1, above.  An RTP Receiver has
   an SSRC value that is unique to the session.  An RTP Receiver is a
   source of RTCP Receiver Reports as specified in section 6 of
   [RFC3550] and RTCP XR VoIP Metrics Reports as specified in section
   4.7 of [RFC3611].

2.2 Applicability of the MIB to RTP System Implementations

   The RTCP XR MIB may be used in RTP Host Systems (end systems), see
   section 3 of [RFC3550], that are supporting Voice over IP (VoIP host
   systems) or in intermediate systems.

   2.2.1 VoIP host Systems are end-systems that may use the RTCP XR MIB
   to collect RTP Voice over IP session data that the host is sending or
   receiving; these data may be used by a network manager to detect and
   diagnose faults that occur over the lifetime of a VoIP session as in
   a "help-desk" scenario.

   2.2.2 Monitors of RTP Voice over IP sessions may be third-party or
   may be located in the RTP host.  Monitors may use the RTCP XR MIB to
   collect Voice over IP session statistical data; these data may be
   used by a network manager for planning and other network-management
   purposes.  A Monitor may use the RTCP XR MIB to collect data to
   permit a network manager to diagnose faults in VoIP sessions.

2.3  Relationship to the RTP MIB V2

   The RTP MIB V2 [draft-ietf-avt-mib-rtp-bis-00.txt] defines a table
   of session identifying information.  The tables in the RTCP XR MIB
   augment the session data from the RTP MIB V2, providing detailed
   performance information for RTP sessions transporting Voice over
   IP.  The RTP MIB V2 session table MUST be implemented if the RTCP
   XR MIB Basic Parameter and Call Quality tables are implemented.
   The history table in this MIB contains aggregate information and
   does not have any relationship to the RTP MIB V2 session table.
   In implementations that use only the RTCP XR history table to
   report aggregate data, the RTP MIB V2 session table MUST NOT be
   implemented.

Clark             Expires August 2006                         [Page 3]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

2.4  Relationship to the RAQMON Architecture

   The Real-time Application QoS monitoring (RAQMON) Framework [RAQMON]
   defines an architecture that extends the Remote Monitoring (RMON)
   family of applications for monitoring of application QoS in real
   time, and an extensible data model with objects carried between
   RAQMON data sources and RAQMON collectors. The RAQMON work is
   more generic, and complementary in concept to RTCP-XR, covering a
   wider range of applications running concurrently, while RTCP-XR
   focuses on in-depth QoS monitoring of media traffic in VoIP.

   The Real-time Application QoS Monitoring (RAQMON) MIB is defined
   by [xxx] and runs on RAQMON collectors. A performance monitoring
   application may query (i) RAQMON collectors for RAQMON MIB
   information about the QoS parameters of multiple concurrent
   applications (ii) end-points and gateways for in-depth RTCP-XR
   information about the media QoS of VoIP or (iii) both.

2.5  The Structure of the RTCP XR MIB

   There are three tables in the RTCP XR MIB

   The rtcpXrBasicParametersTable contains basic packet loss, discard
   and delay related parameters about a session.

   The rtcpXrVoiceQualityMetricsTable contains information about the
   call quality of a session

   The rtcpXrHistoryTable contains aggregate information about a group
   of sessions.

2.6 Application to multi-party and multicast calls

   The RTCP XR MIB may be applied to multi-party calls.  The RTP MIB
   Session table is defined in terms of uni-directional RTP streams
   from a source to a destination.

   For a multi-party IP-IP conference call in which parties are
   directly interconnected in a mesh network, a row should be created
   in the session table for each such interconnection.

   For a multi-party call in which parties are interconnected via
   a bridge function and RTP streams are literally or logically
   terminated at the bridge, a row should be created in the session
   table for the RTP sessions established to and from each endpoint
   and the bridge.

   For a multicast call in which RTP sessions are terminated in
   logical IP addresses from they are redistributed, a row in the
   session table should be created for the source to multicast
   address RTP session.




Clark             Expires August 2006                         [Page 4]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

RTCPXR-MIB DEFINITIONS ::= BEGIN
IMPORTS
       mib-2, MODULE-IDENTITY, NOTIFICATION-TYPE,
       OBJECT-TYPE, Unsigned32, Integer32,
       Gauge32, Counter32                     FROM SNMPv2-SMI
       OBJECT-GROUP, MODULE-COMPLIANCE,
       NOTIFICATION-GROUP                     FROM SNMPv2-CONF
       TEXTUAL-CONVENTION, RowPointer, DateAndTime
                                              FROM SNMPv2-TC
       SnmpAdminString                        FROM SNMP-FRAMEWORK-MIB
       ItuPerceivedSeverity                   FROM ITU-ALARM-TC-MIB
       rtpSessionIndex, rtpSessionCallStatus
                                              FROM RTP-MIBV2;

rtcpXrMIB MODULE-IDENTITY
    LAST-UPDATED "200603040000Z"
    ORGANIZATION
        "IETF AVT Working Group"
    CONTACT-INFO
        "IETF AVT Working Group
         Chairs: Colin Perkins, Magnus Westerlund
         Working Group Email:  avt@ietf.org

         Editors: Alan Clark
                  Telchemy
                  Email: alan@telchemy.com

                  Amy Pendleton
                  Nortel
                  Email: aspen@nortel.com"
   DESCRIPTION
                 "RTCP Extended Reports MIB
                 Copyright (c) The Internet Society (2005)
                 This version of the MIB module is part of
                 RFC nnnn and is based on RFC3611."

   REVISION      "200603040000Z"
   DESCRIPTION
                 "Published as draft-ietf-avt-rtcp-xr-mib-04.txt"

-- RFC Ed: replace above draft with RFC number and remove this note

::= { mib-2 nnn }

-- IANA: need assignment of a mib-2 OID for this MIB
-- RFC Ed: replace mmm with assigned OID number and remove this note









Clark             Expires August 2006                         [Page 5]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

--
-- RTCP Extended Reports - Voice over IP Metrics
--
-- Description
--    This MIB module provides basic voice quality monitoring
--    capabilities for Voice-over-packet systems. The MIB contains
--    3 tables of information that augment the data available in
--    the RTP MIB V2.
--         a table of basic parameters for each Stream
--         a table of call quality metrics for each Stream
--         a table of aggregate statistics for groups of calls
--    the indexes to these tables are imported from the RTP MIB V2
--    and hence this MIB MUST be used in conjunction with at least
--    the RTP session table from that MIB

-- TEXTUAL CONVENTIONS

LeveldB ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS      current
DESCRIPTION
      "Represents a signal level in decibels (dB)."
SYNTAX      Integer32 (-120..120|127)

Rfactor ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS      current
DESCRIPTION
      "Call or transmission quality expressed as an
       R factor in the range 0 to 120. A value of
       127 shall be interpreted as NULL or unsupported."
REFERENCE
       "ITU-T G.107"
SYNTAX      Unsigned32 (0..120|127)

ScaledMOSscore ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS      current
DESCRIPTION
       "Call or transmission quality expressed as a
       MOS score scaled by 10.  MOS is typically represented
       as a 1.0 to 5.0 score with a single decimal place and
       hence in this representation as 10 to 50. A value of
       127 shall be interpreted as NULL or unsupported."
REFERENCE
       "ITU-T P.800"
SYNTAX      Integer32 (10..50|127)

Percentage ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS       current
DESCRIPTION
       "Percentage expressed as a rounded integer."
SYNTAX      Unsigned32 (0..100)

Clark             Expires August 2006                         [Page 6]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

--
-- OBJECTS
--

rtcpXrEvents      OBJECT IDENTIFIER ::= { rtcpXrMIB 0 }
rtcpXrMIBObjects  OBJECT IDENTIFIER ::= { rtcpXrMIB 1 }
rtcpXrConformance OBJECT IDENTIFIER ::= { rtcpXrMIB 2 }

--
-- Table of basic RTP stream parameters
--

rtcpXrBaseParamTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RtcpXrBaseParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
     "Table of basic parameters related to RTP sessions in
      the Session table. "
    ::= { rtcpXrMIBObjects 2 }

rtcpXrBaseParamEntry OBJECT-TYPE
    SYNTAX RtcpXrBaseParamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the table of basic parameters. A row in this table
         is created for each RTP session endpoint participating."
    INDEX { rtpSessionCallStatus, rtpSessionIndex }
    ::= { rtcpXrBaseParamTable 1 }

RtcpXrBaseParamEntry ::= SEQUENCE {
    rtcpXrBaseParamCodecType                      OCTET STRING,
    rtcpXrBaseParamCodecBitRate                   Unsigned32,
    rtcpXrBaseParamFrameDuration                  Unsigned32,
    rtcpXrBaseParamFramesPerPacket                Unsigned32,
    rtcpXrBaseParamSampleRate                     Unsigned32,
    rtcpXrBaseParamDurationMs                     Counter32,
    rtcpXrBaseParamNetworkLossRate                Percentage,
    rtcpXrBaseParamAvgDiscardRate                 Percentage,
    rtcpXrBaseParamBurstLossDensity               Percentage,
    rtcpXrBaseParamBurstLenMs                     Gauge32,
    rtcpXrBaseParamGapLossDensity                 Percentage,
    rtcpXrBaseParamGapLenMs                       Gauge32,
    rtcpXrBaseParamAvgOWDelay                     Gauge32,
    rtcpXrBaseParamAvgEndSysDelay                 Gauge32,
    rtcpXrBaseParamNoiseLeveldBm                  LeveldB,
    rtcpXrBaseParamSignalLeveldBm                 LeveldB,
    rtcpXrBaseParamLocalRERLdB                    LeveldB,
    rtcpXrBaseParamRemoteRERLdB                   LeveldB,
    rtcpXrBaseParamPlcType                        INTEGER,
    rtcpXrBaseParamJBuffAdaptMode                 INTEGER,
    rtcpXrBaseParamJBuffAdaptRate                 Unsigned32,
    rtcpXrBaseParamJBuffAverageDelay              Gauge32,

Clark             Expires August 2006                         [Page 7]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

    rtcpXrBaseParamJBuffMaximumDelay              Gauge32,
    rtcpXrBaseParamJBuffAbsMaxDelay               Gauge32,
    rtcpXrBaseParamJitterLevel                    Gauge32
}

rtcpXrBaseParamCodecType OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(0..32))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Codec type used on this call. The format used shall be
         ITU-T G.7xx, GSM FR, GSM EFR, GSM HR, AMR, AMR WB, iLBC
         or similar.  For example 'ITU G.729A'. It is recommended
         that Codecs are described in consistently with SDP."
    ::= { rtcpXrBaseParamEntry 1 }

rtcpXrBaseParamCodecBitRate OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Codec rate in use at the time this data was captured
         expressed in bits per second.  For example G.711 would
         have the rate 64000 and G.729 would have the rate 8000."
    ::= { rtcpXrBaseParamEntry 2 }

rtcpXrBaseParamFrameDuration OBJECT-TYPE
    SYNTAX Unsigned32 (0..16384)
    UNITS "sample clock ticks"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Companion information to Codec type.  This represents the
         duration of the time interval represented by a frame, which
         is generally equivalent to the nominal spacing of frames.
         This is expressed in sample clock ticks as defined under
         rtxpXrSampleRate.
         This parameter may be equated to the SDP ptime parameter
         which is expressed in milliseconds (however which cannot
         represent certain Codec types, e.g. those with 2.5mS
         frames)."
    ::= { rtcpXrBaseParamEntry 3 }

rtcpXrBaseParamFramesPerPacket OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    UNITS "frames per packet"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Codec frames contained in a single IP packet in
         this RTP stream at the time of sampling. The duration of
         speech per IP packet is the product of Frame Duration and
         Frames Per Packet. This may vary during a call."
    ::= {rtcpXrBaseParamEntry 4 }

Clark             Expires August 2006                         [Page 8]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrBaseParamSampleRate OBJECT-TYPE
    SYNTAX Unsigned32 (0..16777215)
    UNITS "samples per second"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Companion information to Codec type.  This represents the
         rate at which media was sampled (e.g. 8000 for narrowband
         voice, 16000 for wideband voice)."
    ::= { rtcpXrBaseParamEntry 5 }

rtcpXrBaseParamDurationMs OBJECT-TYPE
    SYNTAX Counter32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Current duration of call in milliseconds if still active,
         duration of call in milliseconds if complete."
    ::= { rtcpXrBaseParamEntry 6 }

rtcpXrBaseParamNetworkLossRate OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average rate of network packet loss."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 7 }

rtcpXrBaseParamAvgDiscardRate OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average rate of discards due to jitter."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 8 }

rtcpXrBaseParamBurstLossDensity OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Density of loss and discarded packets during burst periods."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 9 }


Clark             Expires August 2006                         [Page 9]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrBaseParamBurstLenMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average length of bursts in milliseconds."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 10 }

rtcpXrBaseParamGapLossDensity OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Density of loss and discarded packets during gap periods."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 11 }

rtcpXrBaseParamGapLenMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average length of gaps in milliseconds."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 12 }

rtcpXrBaseParamAvgOWDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average (symmetric) one way RTCP delay on call. A value of
         zero indicates that this value has not yet been determined."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 13 }

rtcpXrBaseParamAvgEndSysDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average end system delay on call. A value of zero may
         indicate that this value has not yet been determined."


Clark             Expires August 2006                         [Page 10]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 14 }

rtcpXrBaseParamNoiseLeveldBm OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm0"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Measured received silent period noise level in dBm.
         A value of 127 indicates that this parameter is not
         available.
         In midpoint applications this parameter may not be
         available.  If this is a midstream device and call
         quality metrics were calculated using the value of
         this parameter reported from the endpoint in an
         RTCP XR payload then the value used in this
         calculation MAY be reported."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 15 }

rtcpXrBaseParamSignalLeveldBm OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm0"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Measured received signal level during talkspurts in dBm.
         A value of 127 indicates that this parameter is not
         available.
         In midpoint applications this parameter may not be
         available. If this is a midstream device and call
         quality metrics were calculated using the value of
         this parameter reported from the endpoint in an
         RTCP XR payload then the value used in this
         calculation MAY be reported."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 16 }

rtcpXrBaseParamLocalRERLdB OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Residual Echo Return Loss measured at this endpoint,
         or at the terminating endpoint of this RTP session.
         This relates to the echo level from the network beyond
         the terminating endpoint and may be interpreted as either
         line echo in the case of a gateway or acoustic echo in the
         case of a handset.

Clark             Expires August 2006                         [Page 11]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

         Note that this echo affects conversational quality as
         perceived by the user at the originating end of this
         RTP session.
         A value of 127 indicates that this parameter is not
         available.


         In midpoint applications this parameter may not be
         available.  If this is a midstream device and call
         quality metrics were calculated using the value of
         this parameter reported from the endpoint in an
         RTCP XR payload then the value used in this
         calculation MAY be reported."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 17 }

rtcpXrBaseParamRemoteRERLdB OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Residual Echo Return Loss measured at originating endpoint
         of this RTP session (i.e. the remote endpoint if this MIB
         is implemented in an endpoint).
         Note that this affects the conversational quality
         metrics reported by the terminating (this) endpoint, hence
         is useful in understanding what has affected the reported
         call quality metrics
         A value of 127 indicates that this parameter is not
         available.
         In midpoint applications this parameter may not be
         available.  If this is a midstream device and call
         quality metrics were calculated using the value of
         this parameter reported from the endpoint in an
         RTCP XR payload then the value used in this
         calculation MAY be reported."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 18 }

rtcpXrBaseParamPlcType OBJECT-TYPE
    SYNTAX INTEGER { disabled(1),
                     enhanced(2),
                     standard(3),
                     unspecified (4)}
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Defines type of packet loss concealment used on this call."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry  19 }

Clark             Expires August 2006                         [Page 12]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrBaseParamJBuffAdaptMode OBJECT-TYPE
    SYNTAX INTEGER { reserved (1),
                     nonAdaptive (2),
                     adaptive (3),
                     unknown (4) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Defines if jitter buffer is in fixed or adaptive mode."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry  20 }

rtcpXrBaseParamJBuffAdaptRate OBJECT-TYPE
    SYNTAX Unsigned32 (0..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Estimated adaptation rate of jitter buffer."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= {  rtcpXrBaseParamEntry 21 }

rtcpXrBaseParamJBuffAverageDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average size of jitter buffer in mS."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry 22 }

rtcpXrBaseParamJBuffMaximumDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Maximum delay through jitter buffer at current size in mS."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry  23 }

rtcpXrBaseParamJBuffAbsMaxDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Absolute maximum size jitter buffer can reach in mS."



Clark             Expires August 2006                         [Page 13]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrBaseParamEntry  24 }

rtcpXrBaseParamJitterLevel OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average jitter level measured according to RFC3550 and
         represented in terms of milliseconds."
    REFERENCE
         "See RFC3550 Section 6.4."
    ::= { rtcpXrBaseParamEntry  25 }


--
-- Table of Call Quality Metrics
--

rtcpXrCallQualityTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RtcpXrCallQualityEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
     "Table of voice quality metrics. A row is created
      in this table for each row in the Session table."
    ::= { rtcpXrMIBObjects 3 }

rtcpXrCallQualityEntry OBJECT-TYPE
    SYNTAX RtcpXrCallQualityEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the table of voice quality metrics.  A row in
         this table is created for each row in the Session
         table."
    INDEX { rtpSessionCallStatus, rtpSessionIndex }
    ::= { rtcpXrCallQualityTable 1 }

RtcpXrCallQualityEntry ::= SEQUENCE {
    rtcpXrCallQualityRCQ                            Rfactor,
    rtcpXrCallQualityRLQ                            Rfactor,
    rtcpXrCallQualityExternalRCQ                    Rfactor,
    rtcpXrCallQualityMOSCQ                          ScaledMOSscore,
    rtcpXrCallQualityMOSLQ                          ScaledMOSscore,
    rtcpXrCallQualityRLQestAlgorithm                OCTET STRING,
    rtcpXrCallQualityRCQestAlgorithm                OCTET STRING,
    rtcpXrCallQualityMOSLQEstAlgorithm              OCTET STRING,
    rtcpXrCallQualityMOSCQEstAlgorithm              OCTET STRING
}



Clark             Expires August 2006                         [Page 14]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrCallQualityRCQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Conversational quality R factor for this call. This value
         SHOULD be calculated using ITU G.107 (The E Model) or
         extended versions thereof."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrCallQualityEntry 1 }

rtcpXrCallQualityRLQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Listening quality R factor for this call. This value
         SHOULD be calculated using ITU G.107 (The E Model) or
         extended versions thereof."
    ::= { rtcpXrCallQualityEntry 2 }

rtcpXrCallQualityExternalRCQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "External R factor for this call. This value
         SHOULD be calculated using ITU G.107 (The E Model) or
         extended versions thereof.
         The External R factor relates to the quality of an
         incoming voice from another network segment.  For example
         if a conference bridge terminates and re-creates voice
         streams then an R factor would be calculated at the bridge
         for the endpoint A to bridge segment and relayed to the
         subsequent bridge to endpoint B as an External R factor.
         This allows endpoint B to estimate the end-to-end call
         quality."
    ::= { rtcpXrCallQualityEntry 3 }

rtcpXrCallQualityMOSCQ OBJECT-TYPE
    SYNTAX ScaledMOSscore
    UNITS "MOS x 10"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Estimated conversational quality MOS for this call
        expressed in MOS x 10 (e.g. 41 = MOS of 4.1). This value
        MAY be calculated by converting the R-CQ value to a MOS."



Clark             Expires August 2006                         [Page 15]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrCallQualityEntry 4 }

rtcpXrCallQualityMOSLQ OBJECT-TYPE
    SYNTAX ScaledMOSscore
    UNITS "MOS x 10"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Estimated listening quality MOS for this call
       expressed in MOS x 10 (e.g. 41 = MOS of 4.1). This value
        MAY be calculated by converting the R-CQ value to a MOS."
    REFERENCE
         "See RFC3611 Section 4.7."
    ::= { rtcpXrCallQualityEntry 5 }

rtcpXrCallQualityRLQestAlgorithm OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Call quality algorithm used to determine R-LQ factors.
        For example, 'ITU-T G.107' for the ITU G.107
        E model or 'ETSI TS101329-5E' for ETSI
        TS 101 329-5 Annex E."
    ::= { rtcpXrCallQualityEntry 6 }

rtcpXrCallQualityRCQestAlgorithm OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Call quality algorithm used to determine R-CQ factors.
        For example, 'ITU-T G.107' for the ITU G.107
        E model or 'ETSI TS101329-5E' for ETSI
        TS 101 329-5 Annex E."
    ::= { rtcpXrCallQualityEntry 7 }

rtcpXrCallQualityMOSLQEstAlgorithm OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Call quality algorithm used to determine MOS-LQ scores.
        If any localized parameter scaling is used
        (for example Japan's TTC MOS scaling) then this
        MUST also be reported."
    ::= { rtcpXrCallQualityEntry 8 }






Clark             Expires August 2006                         [Page 16]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrCallQualityMOSCQEstAlgorithm OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Call quality algorithm used to determine MOS-CQ scores.
        If any localized parameter scaling is used
        (for example Japan's TTC MOS scaling) then this
        MUST also be reported."
    ::= { rtcpXrCallQualityEntry 9 }

--
-- History Table
--
--

rtcpXrHistoryTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RtcpXrHistoryEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
     "Table of aggregate measurement data for groups
      of RTP sessions.  A group may be a flow or any
      other logical association of streams."
    ::= { rtcpXrMIBObjects 4 }

rtcpXrHistoryEntry OBJECT-TYPE
    SYNTAX RtcpXrHistoryEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the table of call history records."
    INDEX { rtcpXrHistoryIndex }
    ::= { rtcpXrHistoryTable 1 }

RtcpXrHistoryEntry ::= SEQUENCE {
    rtcpXrHistoryIndex                             Unsigned32,
    rtcpXrHistoryGroupName                         OCTET STRING,
    rtcpXrHistoryStartTime                         DateAndTime,
    rtcpXrHistoryStopTime                          DateAndTime,
    rtcpXrHistoryNumOfSessions                     Counter32,
    rtcpXrHistoryMinDurationMs                     Gauge32,
    rtcpXrHistoryMaxDurationMs                     Gauge32,
    rtcpXrHistoryAvgDurationMs                     Gauge32,
    rtcpXrHistoryMaxNetworkLossRate                Percentage,
    rtcpXrHistoryAvgNetworkLossRate                Percentage,
    rtcpXrHistoryMaxDiscardRate                    Percentage,
    rtcpXrHistoryAvgDiscardRate                    Percentage,
    rtcpXrHistoryMaxBurstLossDensity               Percentage,
    rtcpXrHistoryAvgBurstLossDensity               Percentage,
    rtcpXrHistoryMinBurstLenMs                     Gauge32,
    rtcpXrHistoryMaxBurstLenMs                     Gauge32,
    rtcpXrHistoryAvgBurstLenMs                     Gauge32,
    rtcpXrHistoryMaxGapLossDensity                 Percentage,

Clark             Expires August 2006                         [Page 17]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

    rtcpXrHistoryAvgGapLossDensity                 Percentage,
    rtcpXrHistoryMinGapLenMs                       Gauge32,
    rtcpXrHistoryMaxGapLenMs                       Gauge32,
    rtcpXrHistoryAvgGapLenMs                       Gauge32,
    rtcpXrHistoryMinOneWayDelay                    Gauge32,
    rtcpXrHistoryMaxOneWayDelay                    Gauge32,
    rtcpXrHistoryAvgOneWayDelay                    Gauge32,
    rtcpXrHistoryOneWayDelayCount                  Counter32,
    rtcpXrHistoryMinEndSystemDelay                 Gauge32,
    rtcpXrHistoryMaxEndSystemDelay                 Gauge32,
    rtcpXrHistoryAvgEndSystemDelay                 Gauge32,
    rtcpXrHistoryEndSystemDelayCount               Counter32,
    rtcpXrHistoryMinJitterLevel                    Gauge32,
    rtcpXrHistoryMaxJitterLevel                    Gauge32,
    rtcpXrHistoryAvgJitterLevel                    Gauge32,
    rtcpXrHistoryMinNoiseLeveldBm                  LeveldB,
    rtcpXrHistoryMaxNoiseLeveldBm                  LeveldB,
    rtcpXrHistoryAvgNoiseLeveldBm                  LeveldB,
    rtcpXrHistoryNoiseLevelCount                   Counter32,
    rtcpXrHistoryMinSignalLeveldBm                 LeveldB,
    rtcpXrHistoryMaxSignalLeveldBm                 LeveldB,
    rtcpXrHistoryAvgSignalLeveldBm                 LeveldB,
    rtcpXrHistorySignalLevelCount                  Counter32,
    rtcpXrHistoryMinLocalRERLdB                    LeveldB,
    rtcpXrHistoryMaxLocalRERLdB                    LeveldB,
    rtcpXrHistoryAvgLocalRERLdB                    LeveldB,
    rtcpXrHistoryLocalRERLCount                    Counter32,
    rtcpXrHistoryMinRemoteRERLdB                   LeveldB,
    rtcpXrHistoryMaxRemoteRERLdB                   LeveldB,
    rtcpXrHistoryAvgRemoteRERLdB                   LeveldB,
    rtcpXrHistoryRemoteRERLCount                   Counter32,
    rtcpXrHistoryMinRCQ                            Rfactor,
    rtcpXrHistoryMaxRCQ                            Rfactor,
    rtcpXrHistoryAvgRCQ                            Rfactor,
    rtcpXrHistoryRCQCount                          Counter32,
    rtcpXrHistoryMinRLQ                            Rfactor,
    rtcpXrHistoryMaxRLQ                            Rfactor,
    rtcpXrHistoryAvgRLQ                            Rfactor,
    rtcpXrHistoryRLQCount                          Counter32,
    rtcpXrHistoryMinMOSCQ                          ScaledMOSscore,
    rtcpXrHistoryMaxMOSCQ                          ScaledMOSscore,
    rtcpXrHistoryAvgMOSCQ                          ScaledMOSscore,
    rtcpXrHistoryMOSCQCount                        Counter32,
    rtcpXrHistoryMinMOSLQ                          ScaledMOSscore,
    rtcpXrHistoryMaxMOSLQ                          ScaledMOSscore,
    rtcpXrHistoryAvgMOSLQ                          ScaledMOSscore,
    rtcpXrHistoryMOSLQCount                        Counter32,
    rtcpXrHistoryCQAlgorithm                       OCTET STRING,
    rtcpXrHistoryReset                             INTEGER
}





Clark             Expires August 2006                         [Page 18]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryIndex OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967295)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index for this set of aggregate data."
    ::= { rtcpXrHistoryEntry 1 }

rtcpXrHistoryGroupName OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(0..128))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Name of this set of aggregate data. Examples may include
         a flow, an interface or some other logical grouping of
         RTP sessions."
    ::= { rtcpXrHistoryEntry 2 }

rtcpXrHistoryStartTime OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Time at which this history was reset or started."
    ::= {rtcpXrHistoryEntry 3 }

rtcpXrHistoryStopTime OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Time at which this history was stopped."
    ::= {rtcpXrHistoryEntry 4 }

rtcpXrHistoryNumOfSessions OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of calls included in this history."
    ::= {rtcpXrHistoryEntry 5 }

rtcpXrHistoryMinDurationMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum duration of calls."
    ::= {rtcpXrHistoryEntry 6 }





Clark             Expires August 2006                         [Page 19]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryMaxDurationMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum duration of calls."
    ::= {rtcpXrHistoryEntry 7 }

rtcpXrHistoryAvgDurationMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Average duration of calls within this history."
    ::= {rtcpXrHistoryEntry 8 }

rtcpXrHistoryMaxNetworkLossRate OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum loss rate occurring on any call in this history."
    ::= {rtcpXrHistoryEntry 9 }

rtcpXrHistoryAvgNetworkLossRate OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean for all calls in this history of the individual
       per call packet loss rate."
    ::= {rtcpXrHistoryEntry 10 }

rtcpXrHistoryMaxDiscardRate OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum discard rate occurring on any call in this history."
    ::= {rtcpXrHistoryEntry 11 }










Clark             Expires August 2006                         [Page 20]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryAvgDiscardRate OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean for all calls in this history of the individual
       per call packet discard rate."
    ::= {rtcpXrHistoryEntry 12 }

rtcpXrHistoryMaxBurstLossDensity OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call average burst densities for any
       call in this history. A value of 0 shall be reported if
       no bursts were reported."
    ::= {rtcpXrHistoryEntry 13 }

rtcpXrHistoryAvgBurstLossDensity OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean for all calls in this history of the individual
       per call burst density. A value of 0 shall be reported if
       no bursts were reported."
    ::= {rtcpXrHistoryEntry 14 }

rtcpXrHistoryMinBurstLenMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call burst length for all calls in this
       history for which a burst length was reported. A value of
       0 shall be reported if no bursts were present."
    ::= {rtcpXrHistoryEntry 15 }

rtcpXrHistoryMaxBurstLenMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call burst length for all calls in this
       history for which a burst length was reported. A value of
       0 shall be reported if no bursts were present."
    ::= {rtcpXrHistoryEntry 16 }


Clark             Expires August 2006                         [Page 21]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryAvgBurstLenMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call burst length for all calls in this
       history for which a burst length was reported. A value of
       0 shall be reported if no bursts were present."
    ::= {rtcpXrHistoryEntry 17 }

rtcpXrHistoryMaxGapLossDensity OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call gap density for all calls in this
       history for which a gap density was reported. A value of
       0 shall be reported if no gaps were present."
    ::= {rtcpXrHistoryEntry 18 }

rtcpXrHistoryAvgGapLossDensity OBJECT-TYPE
    SYNTAX Percentage
    UNITS "percent"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call gap density for all calls in this
       history for which a gap density was reported. A value of
       0 shall be reported if no gaps were present."
    ::= {rtcpXrHistoryEntry 19 }
Clark             Expires August 2006                         [Page 4]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryMinGapLenMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call gap length for all calls in this
       history for which a gap length was reported. A value of
       0 shall be reported if no gaps were present."
    ::= {rtcpXrHistoryEntry 20 }








Clark             Expires August 2006                         [Page 22]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryMaxGapLenMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call gap length for all calls in this
       history for which a gap length was reported. A value of
       0 shall be reported if no gaps were present."
    ::= {rtcpXrHistoryEntry 21 }

rtcpXrHistoryAvgGapLenMs OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call gap length for all calls in this
       history for which a gap length was reported. A value of
       0 shall be reported if no gaps were present."
    ::= {rtcpXrHistoryEntry 22 }

rtcpXrHistoryMinOneWayDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call OW Delays for all calls in this
       history for which a Delay was reported. A value of
       0 shall be reported if no Delay values were reported."
    ::= {rtcpXrHistoryEntry 23 }

rtcpXrHistoryMaxOneWayDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call OW Delays for all calls in this
       history for which a Delay was reported. A value of
       0 shall be reported if no Delay values were reported."
    ::= {rtcpXrHistoryEntry 24 }

rtcpXrHistoryAvgOneWayDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call OW Delays for all calls in this
       history for which a Delay was reported. A value of
       0 shall be reported if no Delay values were reported."
    ::= {rtcpXrHistoryEntry 25 }

Clark             Expires August 2006                         [Page 23]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryOneWayDelayCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the One Way Delay
       history values (as Delay may not be available on
       all calls."
    ::= {rtcpXrHistoryEntry 26 }

rtcpXrHistoryMinEndSystemDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call ES Delays for all calls in this
       history for which an ES Delay was reported."
    ::= {rtcpXrHistoryEntry 27 }

rtcpXrHistoryMaxEndSystemDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call ES Delays for all calls in this
       history for which an ES Delay was reported."
    ::= {rtcpXrHistoryEntry 28 }

rtcpXrHistoryAvgEndSystemDelay OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call ES Delays for all calls in this
       history for which an ES Delay was reported."
    ::= {rtcpXrHistoryEntry 29 }

rtcpXrHistoryEndSystemDelayCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the End System
       Delay history values (as End System Delay
       may not be available on all calls."
    ::= {rtcpXrHistoryEntry 30 }






Clark             Expires August 2006                         [Page 24]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryMinJitterLevel OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call jitter for all calls in this
       history for which a jitter value was reported."
    ::= {rtcpXrHistoryEntry 31 }

rtcpXrHistoryMaxJitterLevel OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call jitter for all calls in this
       history for which a jitter value was reported."
    ::= {rtcpXrHistoryEntry 32 }

rtcpXrHistoryAvgJitterLevel OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "milliseconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call jitter for all calls in this
       history for which a jitter value was reported."
    ::= {rtcpXrHistoryEntry 33 }

rtcpXrHistoryMinNoiseLeveldBm OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm0"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call Noise Level for all calls in this
       history for which a Noise Level value was reported."
    ::= {rtcpXrHistoryEntry 34 }

rtcpXrHistoryMaxNoiseLeveldBm OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm0"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call Noise Level for all calls in this
       history for which a Noise Level value was reported."
    ::= {rtcpXrHistoryEntry 35 }






Clark             Expires August 2006                         [Page 25]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryAvgNoiseLeveldBm OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm0"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call Noise Level for all calls in this
       history for which a Noise Level value was reported."
    ::= {rtcpXrHistoryEntry 36 }

rtcpXrHistoryNoiseLevelCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the Noise Level
       history values (as Noise Level is an optional
       parameter and may not be present on all calls."
    ::= {rtcpXrHistoryEntry 37 }

rtcpXrHistoryMinSignalLeveldBm OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm0"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call Signal Level for all calls in this
       history for which a Signal Level value was reported."
    ::= {rtcpXrHistoryEntry 38 }

rtcpXrHistoryMaxSignalLeveldBm OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm0"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call Signal Level for all calls in this
       history for which a Signal Level value was reported."
    ::= {rtcpXrHistoryEntry 39 }

rtcpXrHistoryAvgSignalLeveldBm OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm0"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call Signal Level for all calls in this
       history for which a Signal Level value was reported."
    ::= {rtcpXrHistoryEntry 40 }







Clark             Expires August 2006                         [Page 26]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistorySignalLevelCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the Signal Level
       history values (as Signal Level is an optional
       parameter and may not be present on all calls."
    ::= {rtcpXrHistoryEntry 41 }

rtcpXrHistoryMinLocalRERLdB OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call local RERL for all calls in this
       history for which a local RERL value was reported."
    ::= {rtcpXrHistoryEntry 42 }

rtcpXrHistoryMaxLocalRERLdB OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call local RERL for all calls in this
       history for which a local RERL value was reported."
    ::= {rtcpXrHistoryEntry 43 }

rtcpXrHistoryAvgLocalRERLdB OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call local RERL for all calls in this
       history for which a local RERL value was reported."
    ::= {rtcpXrHistoryEntry 44 }

rtcpXrHistoryLocalRERLCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the Local RERL
       history values (as Local RERL is an optional
       parameter and may not be present on all calls."
    ::= {rtcpXrHistoryEntry 45 }






Clark             Expires August 2006                         [Page 27]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryMinRemoteRERLdB OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call remote RERL for all calls in this
       history for which a remote RERL value was reported."
    ::= {rtcpXrHistoryEntry 46 }

rtcpXrHistoryMaxRemoteRERLdB OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call remote RERL for all calls in this
       history for which a remote RERL value was reported."
    ::= {rtcpXrHistoryEntry 47 }

rtcpXrHistoryAvgRemoteRERLdB OBJECT-TYPE
    SYNTAX LeveldB
    UNITS "dBm"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call remote RERL for all calls in this
       history for which a remote RERL value was reported."
    ::= {rtcpXrHistoryEntry 48 }

rtcpXrHistoryRemoteRERLCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the Remote RERL
       history values (as Remote RERL is an optional
       parameter and may not be present on all calls."
    ::= {rtcpXrHistoryEntry 49 }

rtcpXrHistoryMinRCQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call R-CQ for all calls in this
       history for which an R-CQ value was reported."
    ::= {rtcpXrHistoryEntry 50 }






Clark             Expires August 2006                         [Page 28]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryMaxRCQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call R-CQ for all calls in this
       history for which an R-CQ value was reported."
    ::= {rtcpXrHistoryEntry 51 }

rtcpXrHistoryAvgRCQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call R-CQ for all calls in this
       history for which an R-CQ value was reported."
    ::= {rtcpXrHistoryEntry 52 }

rtcpXrHistoryRCQCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the R CQ
       history values (as R CQ is an optional
       parameter and may not be present on all calls."
    ::= {rtcpXrHistoryEntry 53 }

rtcpXrHistoryMinRLQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call R-LQ for all calls in this
       history for which an R-LQ value was reported."
    ::= {rtcpXrHistoryEntry 54 }

rtcpXrHistoryMaxRLQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call R-LQ for all calls in this
       history for which an R-LQ value was reported."
    ::= {rtcpXrHistoryEntry 55 }






Clark             Expires August 2006                         [Page 29]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryAvgRLQ OBJECT-TYPE
    SYNTAX Rfactor
    UNITS "R factor"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call R-LQ for all calls in this
       history for which an R-LQ value was reported."
    ::= {rtcpXrHistoryEntry 56 }

rtcpXrHistoryRLQCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the R LQ
       history values (as R LQ is an optional
       parameter and may not be present on all calls."
    ::= {rtcpXrHistoryEntry 57 }

rtcpXrHistoryMinMOSCQ OBJECT-TYPE
    SYNTAX ScaledMOSscore
    UNITS "MOS x 10"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call MOS-CQ for all calls in this
       history for which a MOS-CQ value was reported."
    ::= {rtcpXrHistoryEntry 58 }

rtcpXrHistoryMaxMOSCQ OBJECT-TYPE
    SYNTAX ScaledMOSscore
    UNITS "MOS x 10"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call MOS-CQ for all calls in this
       history for which a MOS-CQ value was reported."
    ::= {rtcpXrHistoryEntry 59 }

rtcpXrHistoryAvgMOSCQ OBJECT-TYPE
    SYNTAX ScaledMOSscore
    UNITS "MOS x 10"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call MOS-CQ for all calls in this
       history for which a MOS-CQ value was reported."
    ::= {rtcpXrHistoryEntry 60 }






Clark             Expires August 2006                         [Page 30]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryMOSCQCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the MOS CQ
       history values (as MOS CQ is an optional
       parameter and may not be present on all calls."
    ::= {rtcpXrHistoryEntry 61 }

rtcpXrHistoryMinMOSLQ OBJECT-TYPE
    SYNTAX ScaledMOSscore
    UNITS "MOS x 10"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Minimum of the per-call MOS-LQ for all calls in this
       history for which a MOS-LQ value was reported."
    ::= {rtcpXrHistoryEntry 62 }

rtcpXrHistoryMaxMOSLQ OBJECT-TYPE
    SYNTAX ScaledMOSscore
    UNITS "MOS x 10"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Maximum of the per-call MOS-LQ for all calls in this
       history for which a MOS-LQ value was reported."
    ::= {rtcpXrHistoryEntry 63 }

rtcpXrHistoryAvgMOSLQ OBJECT-TYPE
    SYNTAX ScaledMOSscore
    UNITS "MOS x 10"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Mean of the per-call MOS-LQ for all calls in this
       history for which a MOS-LQ value was reported."
    ::= {rtcpXrHistoryEntry 64 }

rtcpXrHistoryMOSLQCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Number of sessions included in the MOS LQ
       history values (as MOS LQ is an optional
       parameter and may not be present on all calls."
    ::= {rtcpXrHistoryEntry 65 }






Clark             Expires August 2006                         [Page 31]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrHistoryCQAlgorithm OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(0..32))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Call quality algorithm used - if consistent
       for all calls in this history."
    ::= {rtcpXrHistoryEntry 66 }

rtcpXrHistoryReset OBJECT-TYPE
    SYNTAX INTEGER { running (1),
                     stop (2),
                     reset (3)
                    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
      "Status of this row in the history table.
       Writing a value of 2 to this object MUST cause
       history updates to be stopped for this row. Writing
       a value of 3 to this object MUST cause the history
       row to be reset.
       Reads MUST return a value of 1 if the row is still
       being updated or 2 if the row update has stopped."
    ::= {rtcpXrHistoryEntry 67 }

--
-- Notifications
--

rtcpXrVoipThresholdViolation NOTIFICATION-TYPE
    OBJECTS { rtcpXrVoipAlertSeverity, rtcpXrVoipAlertType,
              rtcpXrVoipAlertInfoType, rtcpXrVoipAlertPointer }
    STATUS current
    DESCRIPTION
        "Notification that voice quality has changed
         Sent immediately when the condition is detected."
    ::= { rtcpXrEvents 1}


rtcpXrEventParam OBJECT IDENTIFIER ::= { rtcpXrEvents 2 }

rtcpXrVoipAlertType OBJECT-TYPE
    SYNTAX SnmpAdminString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Text description of the type of alert.  Where possible,
        this parameter should be populated with the correct
        rtcpXrVoipEntry or rtcpXrVoipHistory description."
    ::= { rtcpXrEventParam 1 }




Clark             Expires August 2006                         [Page 32]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

rtcpXrVoipAlertInfoType OBJECT-TYPE
    SYNTAX INTEGER {  adminStringOnly (1),
                      sessionPointer (2),
                      historyPointer (3)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "Indicates the type of information returned in the
          rtcpXrVoipAlertInfo parameter."
    ::= { rtcpXrEventParam 2 }

rtcpXrVoipAlertPointer OBJECT-TYPE
    SYNTAX RowPointer
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "Pointer to the table of call session information to
         identify the specific call that triggered the alert."
    ::= { rtcpXrEventParam 3 }

rtcpXrVoipAlertSeverity OBJECT-TYPE
    SYNTAX ItuPerceivedSeverity
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The severity of the alert as defined in ITU-T X.733 and
        RFC3877."
    REFERENCE
        "See Alarm MIB - RFC3877."
    ::= { rtcpXrEventParam 4 }

--
--  MODULE GROUPS
--
-- There are four types of RTCP XR VoIP Metrics System.
--
-- RTCP XR VOIP Metrics Systems MUST implement one of the four
-- identified types of system and SHOULD NOT implement the
-- rtcpXrMinimalCompliance system, which is included only
-- for reasons of compatibility with RFC3611's minimal
-- requirements.
--

       rtcpXrCompliances OBJECT IDENTIFIER ::= { rtcpXrConformance 1 }
       rtcpXrGroups OBJECT IDENTIFIER ::= { rtcpXrConformance 2 }


       rtcpXrFullMetricsCompliance MODULE-COMPLIANCE
           STATUS  current
           DESCRIPTION
               "Describes the requirements for conformance to the
                rtcpXr MIB for VoIP devices that support basic
                reporting."

Clark             Expires August 2006                         [Page 33]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

           MODULE  -- this module
           MANDATORY-GROUPS {
                              rtcpXrBaseParamGroup,
                              rtcpXrCallQualityGroup
                            }
           ::= { rtcpXrCompliances 1 }

       rtcpXrMetricsAlertsCompliance MODULE-COMPLIANCE
           STATUS  current
           DESCRIPTION
               "Describes the requirements for conformance to the
                rtcpXr MIB for VoIP devices that support reporting
                and alerts."
           MODULE  -- this module
           MANDATORY-GROUPS {
                              rtcpXrBaseParamGroup,
                              rtcpXrCallQualityGroup,
                              rtcpXrNotificationParmsGroup,
                              rtcpXrNotificationsGroup
                            }
           ::= { rtcpXrCompliances 2 }

       rtcpXrMetricsHistoryCompliance MODULE-COMPLIANCE
           STATUS  current
           DESCRIPTION
               "Describes the requirements for conformance to the
                rtcpXr MIB for VoIP devices that support reporting,
                call history and alerts."
           MODULE  -- this module
           MANDATORY-GROUPS {
                              rtcpXrBaseParamGroup,
                              rtcpXrCallQualityGroup,
                              rtcpXrMIBHistoryGroup,
                              rtcpXrNotificationParmsGroup,
                              rtcpXrNotificationsGroup }
           ::= { rtcpXrCompliances 3 }

       rtcpXrHistoryCompliance MODULE-COMPLIANCE
           STATUS  current
           DESCRIPTION
               "Describes the requirements for conformance to the
                rtcpXr MIB for VoIP devices that support only
                call history."
           MODULE  -- this module
           MANDATORY-GROUPS { rtcpXrMIBHistoryGroup
                               }
           ::= { rtcpXrCompliances 4 }

      rtcpXrMinimalCompliance MODULE-COMPLIANCE
           STATUS  current
           DESCRIPTION
               "Describes the minimal requirements for conformance to
                the rtcpXr MIB - NOT RECOMMENDED."
           MODULE  -- this module

Clark             Expires August 2006                         [Page 34]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

           MANDATORY-GROUPS {
                              rtcpXrBaseParamGroup
                            }
           ::= { rtcpXrCompliances 5 }

      rtcpXrBaseParamGroup OBJECT-GROUP
           OBJECTS {
                   rtcpXrBaseParamCodecType,
                   rtcpXrBaseParamCodecBitRate,
                   rtcpXrBaseParamFrameDuration,
                   rtcpXrBaseParamFramesPerPacket,
                   rtcpXrBaseParamSampleRate,
                   rtcpXrBaseParamDurationMs,
                   rtcpXrBaseParamNetworkLossRate,
                   rtcpXrBaseParamAvgDiscardRate,
                   rtcpXrBaseParamBurstLossDensity,
                   rtcpXrBaseParamBurstLenMs,
                   rtcpXrBaseParamGapLossDensity,
                   rtcpXrBaseParamGapLenMs,
                   rtcpXrBaseParamAvgOWDelay,
                   rtcpXrBaseParamAvgEndSysDelay,
                   rtcpXrBaseParamNoiseLeveldBm,
                   rtcpXrBaseParamSignalLeveldBm,
                   rtcpXrBaseParamLocalRERLdB,
                   rtcpXrBaseParamRemoteRERLdB,
                   rtcpXrBaseParamPlcType,
                   rtcpXrBaseParamJBuffAdaptMode,
                   rtcpXrBaseParamJBuffAdaptRate,
                   rtcpXrBaseParamJBuffAverageDelay,
                   rtcpXrBaseParamJBuffMaximumDelay,
                   rtcpXrBaseParamJBuffAbsMaxDelay,
                   rtcpXrBaseParamJitterLevel
                   }
           STATUS current
           DESCRIPTION
               "Objects used in rtcpXr VoIP Metrics MIB"
           ::= { rtcpXrGroups 1 }

      rtcpXrCallQualityGroup OBJECT-GROUP
           OBJECTS {
                   rtcpXrCallQualityRCQ,
                   rtcpXrCallQualityRLQ,
                   rtcpXrCallQualityExternalRCQ,
                   rtcpXrCallQualityMOSCQ,
                   rtcpXrCallQualityMOSLQ,
                   rtcpXrCallQualityRLQestAlgorithm,
                   rtcpXrCallQualityRCQestAlgorithm,
                   rtcpXrCallQualityMOSLQEstAlgorithm,
                   rtcpXrCallQualityMOSCQEstAlgorithm
                   }
           STATUS current
           DESCRIPTION
               "Call quality objects used in rtcpXr VoIP Metrics MIB"
           ::= { rtcpXrGroups 2 }

Clark             Expires August 2006                         [Page 35]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

       rtcpXrMIBHistoryGroup OBJECT-GROUP
           OBJECTS {
                   rtcpXrHistoryGroupName,
                   rtcpXrHistoryStartTime,
                   rtcpXrHistoryStopTime,
                   rtcpXrHistoryNumOfSessions,
                   rtcpXrHistoryMinDurationMs,
                   rtcpXrHistoryMaxDurationMs,
                   rtcpXrHistoryAvgDurationMs,
                   rtcpXrHistoryMaxNetworkLossRate,
                   rtcpXrHistoryAvgNetworkLossRate,
                   rtcpXrHistoryMaxDiscardRate,
                   rtcpXrHistoryAvgDiscardRate,
                   rtcpXrHistoryMaxBurstLossDensity,
                   rtcpXrHistoryAvgBurstLossDensity,
                   rtcpXrHistoryMinBurstLenMs,
                   rtcpXrHistoryMaxBurstLenMs,
                   rtcpXrHistoryAvgBurstLenMs,
                   rtcpXrHistoryMaxGapLossDensity,
                   rtcpXrHistoryAvgGapLossDensity,
                   rtcpXrHistoryMinGapLenMs,
                   rtcpXrHistoryMaxGapLenMs,
                   rtcpXrHistoryAvgGapLenMs,
                   rtcpXrHistoryMinOneWayDelay,
                   rtcpXrHistoryMaxOneWayDelay,
                   rtcpXrHistoryAvgOneWayDelay,
                   rtcpXrHistoryOneWayDelayCount,
                   rtcpXrHistoryMinEndSystemDelay,
                   rtcpXrHistoryMaxEndSystemDelay,
                   rtcpXrHistoryAvgEndSystemDelay,
                   rtcpXrHistoryEndSystemDelayCount,
                   rtcpXrHistoryAvgJitterLevel,
                   rtcpXrHistoryMinJitterLevel,
                   rtcpXrHistoryMaxJitterLevel,
                   rtcpXrHistoryMinNoiseLeveldBm,
                   rtcpXrHistoryMaxNoiseLeveldBm,
                   rtcpXrHistoryAvgNoiseLeveldBm,
                   rtcpXrHistoryNoiseLevelCount,
                   rtcpXrHistoryMinSignalLeveldBm,
                   rtcpXrHistoryMaxSignalLeveldBm,
                   rtcpXrHistoryAvgSignalLeveldBm,
                   rtcpXrHistorySignalLevelCount,
                   rtcpXrHistoryMinLocalRERLdB,
                   rtcpXrHistoryMaxLocalRERLdB,
                   rtcpXrHistoryAvgLocalRERLdB,
                   rtcpXrHistoryLocalRERLCount,
                   rtcpXrHistoryMinRemoteRERLdB,
                   rtcpXrHistoryMaxRemoteRERLdB,
                   rtcpXrHistoryAvgRemoteRERLdB,
                   rtcpXrHistoryRemoteRERLCount,
                   rtcpXrHistoryMinRCQ,
                   rtcpXrHistoryMaxRCQ,
                   rtcpXrHistoryAvgRCQ,
                   rtcpXrHistoryRCQCount,

Clark             Expires August 2006                         [Page 36]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

                   rtcpXrHistoryMinRLQ,
                   rtcpXrHistoryMaxRLQ,
                   rtcpXrHistoryAvgRLQ,
                   rtcpXrHistoryRLQCount,
                   rtcpXrHistoryMinMOSCQ,
                   rtcpXrHistoryMaxMOSCQ,
                   rtcpXrHistoryAvgMOSCQ,
                   rtcpXrHistoryMOSCQCount,
                   rtcpXrHistoryMinMOSLQ,
                   rtcpXrHistoryMaxMOSLQ,
                   rtcpXrHistoryAvgMOSLQ,
                   rtcpXrHistoryMOSLQCount,
                   rtcpXrHistoryCQAlgorithm,
                   rtcpXrHistoryReset
                 }
           STATUS current
           DESCRIPTION
               "Objects used in rtcpXr VoIP History MIB"
           ::= { rtcpXrGroups 3 }

       rtcpXrNotificationParmsGroup OBJECT-GROUP
           OBJECTS {
                   rtcpXrVoipAlertSeverity,
                   rtcpXrVoipAlertType,
                   rtcpXrVoipAlertInfoType,
                   rtcpXrVoipAlertPointer
                   }
           STATUS current
           DESCRIPTION
               "Notification parameters emitted by a rtcpXr endpoint."
           ::= { rtcpXrGroups 4 }

       rtcpXrNotificationsGroup NOTIFICATION-GROUP
           NOTIFICATIONS {
                   rtcpXrVoipThresholdViolation
                   }
           STATUS current
           DESCRIPTION
               "Notifications emitted by a rtcpXr endpoint."
           ::= { rtcpXrGroups 5 }


   END












Clark             Expires August 2006                        [Page 37]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

4.  Security Considerations


   Access to rtcpXrHistoryReset can result in resetting the table of
   aggregate call quality information, which results in the loss of
   useful management data.

   It is thus important to control even GET and/or NOTIFY access to
   these objects and possibly to even encrypt their values when sending
   them over the network via SNMP.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

5. IANA Considerations

   An OID within the mib-2 tree is requested, following which this note
   may be deleted.

6.  Acknowledgements

   The authors would like to acknowledge the input and advice provided
   by Dan Romascanu, Rajesh Kumar Kim Curran, Shane Holthaus and Brian
   Park.















Clark             Expires August 2006                      [Page 38]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006

7.  Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

8.  Normative References

   [RFC3550]   Shulzrinne, H., Casner, S., Frederick, R. and V.
               Jacobson, "RTP: A Transport Protocol for real-time
               applications," RFC 3550, July 2003.

   [RFC3611]   Friedman, T., Caceres, R., Clark, A., "RTP Control
               Protocol Reporting Extensions (RTCP XR)," RFC 3611,
               [October/November] 2003

   [RFC2578]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
               Rose, M. and S. Waldbusser, "Structure of Management
               Information Version 2 (SMIv2)", STD 58, RFC 2578,
               December 1999.

   [RFC2579]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
               Rose, M. and S. Waldbusser, "Textual Conventions for
               SMIv2", STD 58, RFC 2579, December 1999.

   [RFC2580]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
               Rose, M. and S. Waldbusser, "Conformance Statements for
               SMIv2", STD 58, RFC 2580, December 1999.

9. Informative References

   [RFC3410]   Case, J., Mundy, R., Partain, D. and Stewart, B.,
               "Introduction and Applicability Statements for Internet
               Standard Management Framework", RFC 3410, December 2002

   [RAQMON]    Siddiqui, A., Romascanu, D.,
               draft-ietf-rmonmib-framework-16.txt

Clark             Expires August 2006                         [Page 39]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006



8. Authors' Addresses

   Alan Clark
   Telchemy Incorporated
   3360 Martins Farm Road, Ste 200
   Suwanee, Georgia 30024
   U.S.A.

   Email: alan@telchemy.com

   Amy Pendleton
   Nortel
   2380 Performance Drive
   Richardson, Texas 75081
   U.S.A.

   Email: aspen@nortel.com



9. Full Copyright Statement

   Copyright (C) The Internet Society (2006).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.











Clark             Expires August 2006                      [Page 40]


draft-ietf-avt-rtcp-xr-mib-04.txt                           March 2006


    This document and the information contained herein are provided on
    an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
    REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE
    INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
    THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
    WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.















































Clark                    Expires August 2006                 [Page 41]