[Search] [txt|pdf|bibtex] [Tracker] [WG] [Email] [Nits]

Versions: 00                                                            
INTERNET-DRAFT                                           Ari Medvinsky
draft-ietf-cat-kerberos-err-msg-00.txt                        Matt Hur
Updates: RFC 1510                                  Dominique Brezinski
expires September 30, 1997                       CyberSafe Corporation
                                                           Gene Tsudik
                                                            Brian Tung

Integrity Protection for the Kerberos Error Message

0.  Status Of this Memo

    This document is an Internet-Draft.  Internet-Drafts are working
    documents of the Internet Engineering Task Force (IETF), its
    areas, and its working groups.  Note that other groups may also
    distribute working documents as Internet-Drafts.

    Internet-Drafts are draft documents valid for a maximum of six
    months and may be updated, replaced, or obsoleted by other
    documents at any time.  It is inappropriate to use Internet-Drafts
    as reference material or to cite them other than as "work in

    To learn the current status of any Internet-Draft, please check
    the "1id-abstracts.txt" listing contained in the Internet-Drafts
    Shadow Directories on ds.internic.net (US East Coast),
    nic.nordu.net (Europe), ftp.isi.edu (US West Coast), or
    munnari.oz.au (Pacific Rim).

    The distribution of this memo is unlimited.  It is filed as
    draft-ietf-cat-kerberos-pk-init-03.txt, and expires June xx, 1997.
    Please send comments to the authors.

1.  Abstract

    The Kerberos error message, as defined in RFC 1510, is transmitted
    to the client without any integrity assurance.  Therefore, the
    client has no means to distinguish between a valid error message
    sent from the KDC and one sent by an attacker.  This draft describes
    a method for assuring the integrity of Kerberos error messages, and
    proposes a consistent format for the e-data field in the KRB_ERROR
    message.  This e-data format enables the storage of cryptographic
    checksums by providing an extensible mechanism for specifying e-data

2.  Motivation

    In the Kerberos protocol [1], if an error occurs for AS_REQ,
    TGS_REQ, or AP_REQ, a clear text error message is returned to the
    client.  An attacker may exploit this vulnerability by sending a
    false error message as a reply to any of the above requests.  For
    example, an attacker may send the KDC_ERR_KEY_EXPIRED error message
    in order to force a user to change their password in hope that the
    new key will not be as strong as the current key, and thus, easier
    to break.

    Since false error messages may be utilized by an attacker, a
    Kerberos client should have a means for determining how much trust
    to place in a given error message.  The rest of this draft
    describes a method for assuring the integrity of Kerberos error

3.  Approach

    We propose taking a cryptographic checksum over the entire KRB-ERROR
    message.  This checksum would be returned as part of the error
    message and would enable the client to verify the integrity of the
    error message.  For interoperability reasons, no new fields are
    added to the KRB-ERROR message.  Instead, the e-data field (see
    figure 1) is utilized to carry the cryptographic checksum.

3.1 Cryptographic checksums in error messages for AS_REQ,

    If an error occurs for the AS request, the only key that is
    available to the KDC is the shared secret (the key derived from the
    clients password) registered in the KDCs database.  The KDC will
    use this key to sign the error message, if and only if, the client
    already proved knowledge of the shared secret in the AS request
    (e.g. via PA-ENC-TIMESTAMP in preauth data).  This policy is needed
    to prevent an attacker from getting the KDC to send a signed error
    message and then launching an off-line attack in order to obtain a
    key of a given principal.

    If an error occurs for a TGS or an AP request, the server will use
    the session key sealed in the clients ticket granting ticket to
    compute the checksum over the error message.  If the checksum could
    not be computed (e.g. error while decrypting the ticket) the error
    message is returned to the client without the checksum.  The client
    then has the option to treat unprotected error messages differently.

            pvno       [0]  integer,
            msg-type   [1]  integer,
            ctime      [2]  KerberosTime OPTIONAL,
            cusec      [3]  INTEGER OPTIONAL,
            stime      [4]  KerberosTime,
            susec      [5]  INTEGER,
            error-code [6]  INTEGER,
            crealm     [7]  Realm OPTIONAL,
            cname      [8]  PrincipalName OPTIONAL,
            realm      [9]  Realm,         --Correct realm
            sname      [10] PrincipalName, --Correct name
            e-text     [11] GeneralString OPTIONAL,
            e-data     [12] OCTET STRING OPTIONAL
    Figure 1

3.2 Format of the e-data field

    We propose to place the cryptographic checksum in the e-data field.
    First, we review the format of the e-data field, as specified in
    RFC 1510.  The format of e-data is specified only in two cases [2].
    "If the error code is KDC_ERR_PREAUTH_REQUIRED, then the e-data
    field will contain an encoding of a sequence of padata fields":

                padata-type    [1] INTEGER,
                padata-value   [2] OCTET STRING

    The second case deals with the KRB_AP_ERR_METHOD error code.  The
    e-data field will contain an encoding of the following sequence:

                     method-type    [0] INTEGER,
                     method-data    [1] OCTET STRING OPTIONAL

    method-type indicates the required alternate authentication method.

    It should be noted that, in the case of KRB_AP_ERR_METHOD, a signed
    checksum is not returned as part of the error message, since the
    error code indicates that the Kerberos credentials provided in the
    AP_REQ message are unacceptable.

    We propose that the e-data field have the following format for all
    error-codes (except KRB_AP_ERR_METHOD):

    E-DATA ::=  SEQUENCE {
                data-type    [1] INTEGER,
                data-value   [2] OCTET STRING,

    The data-type field specifies the type of information that is
    carried in the data-value field.  Thus, to send a cryptographic
    checksum back to the client, the data-type is set to CHECKSUM, the
    data-value is set to the ASN.1 encoding of the following sequence:

    Checksum  ::=  SEQUENCE {
                   cksumtype  [0] INTEGER,
                   checksum   [1] OCTET STRING

3.3 Computing the checksum

    After the error message is filled out, the error structure is
    converted into ASN.1 representation.  A cryptographic checksum is
    then taken over the encoded error message; the result is placed in
    the error message structure, as the last item in the e-data field.
    To send the error message, ASN.1 encoding is again performed over
    the error message, which now includes the cryptographic checksum.

3.4 Verifying the integrity of the error message

    In addition to verifying the cryptographic checksum for the error
    message, the client must verify that the error message is bound to
    its request.  This is done by comparing the ctime field in the
    error message to its counterpart in the request message.

4.  E-DATA types

    Since the e-data types must not conflict with preauthentication data
    types, we propose that the preauthentication data types in the range
    of 2048 and above be reserved for use as e-data types.

    We define the following e-data type in support of integrity checking
    for the Kerberos error message:

    CHECKSUM = 2048 -- the keyed checksum described above

5.  Discussion

5.1 e-data types

    The extension for Kerberos error messages, as outlined above, is
    extensible to allow for definition of other error data types.
    We propose that the following e-data types be reserved:

    KDCTIME = 2049
    The error data would consist of the KDCs time in KerberosTime.
    This data would be used by the client to adjust for clock skew.

    REDIRECT = 2050
    The error data would consist of a hostname.  The hostname would
    indicate the authoritative KDC from which to obtain a TGT.

5.2 e-data types vs. error code specific data formats

    Since RFC 1510 does not define an error data type, the data format
    must be explicitly specified for each error code.  This draft has
    proposed an extension to RFC 1510 that would introduce the concept
    of error data types.  This would allow for a manageable set of data
    types to be used for any error message.  The authors assume that
    the introduction of this e-data structure will not break any
    existing Kerberos implementations.

6.  Bibliography

    [1] J. Kohl, C. Neuman.  The Kerberos Network Authentication
        Service (V5).  Request for Comments: 1510
    [2] J. Kohl, C. Neuman.  The Kerberos Network Authentication
        Service (V5).  Request for Comments: 1510 p.67

7.  Authors

    Ari Medvinsky       <ari.medvinsky@cybersafe.com>
    Matthew Hur         <matt.hur@cybersafe.com>
    Dominique Brezinski <dominique.brezinski@cybersafe.com>

    CyberSafe Corporation
    1605 NW Sammamish Road
    Suite 310
    Issaquah, WA 98027-5378
    Phone: (206) 391-6000
    Fax:   (206) 391-0508

    Brian Tung  <brian@isi.edu>
    Gene Tsudik <gts@isi.edu>

    USC Information Sciences Institute
    4676 Admiralty Way Suite 1001
    Marina del Rey CA 90292-6695
    Phone: (310) 822-1511