Internet Working Group                             Thomas D. Nadeau, Ed.
Internet Draft                                       Cisco Systems, Inc.
Proposed Status: Standards Track
Expires: March 2006                                   Adrian Farrel, Ed.
                                                      Old Dog Consulting

                                                          September 2006


      Generalized Multiprotocol Label Switching (GMPLS) Traffic
               Engineering Management Information Base

                draft-ietf-ccamp-gmpls-te-mib-16.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups. Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes managed objects for Generalized
   Multiprotocol Label Switching (GMPLS) based traffic engineering.


Nadeau and Farrel            Expires March 2007                 [Page 1]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

Table of Contents

   1. Introduction ........................................... 2
   1.1. Migration Strategy ................................... 3
   2. Terminology ............................................ 3
   3. The Internet-Standard Management Framework ............. 4
   4. Outline ................................................ 4
   4.1. Summary of GMPLS Traffic Engineering MIB Module ...... 4
   5. Brief Description of GMPLS TE MIB Objects .............. 5
   5.1. gmplsTunnelTable ..................................... 5
   5.2. gmplsTunnelHopTable .................................. 6
   5.3. gmplsTunnelARHopTable ................................ 6
   5.4. gmplsTunnelCHopTable ................................. 6
   5.5. gmplsTunnelErrorTable ................................ 6
   5.6. gmplsTunnelReversePerfTable .......................... 6
   5.7.  Use of 32-bit and 64-bit Counters ................... 6
   6. Cross-referencing to the gmplsLabelTable ............... 7
   7. Example of GMPLS Tunnel Setup .......................... 7
   8. GMPLS Traffic Engineering MIB Module .................. 11
   9. Security Considerations ............................... 47
   10. Acknowledgments ...................................... 48
   11. IANA Considerations .................................. 48
   11.1. IANA Considerations for GMPLS-TE-STD-MIB ........... 48
   11.2. Dependence on IANA MIB Modules ..................... 49
   11.2.1. IANA-GMPLS-TC-MIB Definition ..................... 49
   12. References ........................................... 56
   12.1. Normative References ............................... 56
   12.2. Informative References ............................. 58
   13. Contact Information .................................. 58
   14. Intellectual Property Considerations ................. 59
   15. Full Copyright Statement ............................. 59

1. Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes managed objects for modeling
   Generalized Multiprotocol Label Switching (GMPLS) [RFC3945] based
   traffic engineering. The tables and objects defined in this document
   extend those defined in the equivalent document for MPLS traffic
   engineering [RFC3812], and management of GMPLS traffic engineering is
   built on management of MPLS traffic engineering.

   The MIB modules in this document should be used in conjunction with
   the companion document [GMPLSLSRMIB] for GMPLS based traffic
   engineering configuration and management.

   Comments should be made direct to the CCAMP mailing list at
   ccamp@ops.ietf.org.


Nadeau and Farrel            Expires March 2007                 [Page 2]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in BCP 14, RFC 2119,
   reference [RFC2119].

1.1. Migration Strategy

   MPLS-TE LSPs may be modeled and managed using the MPLS-TE-STD-MIB
   module [RFC3812].

   LSRs may be migrated to model and manage their TE LSPs using the MIB
   modules in this document in order to migrate the LSRs to GMPLS
   support, or to take advantage of additional MIB objects defined in
   these MIB modules that are applicable to MPLS-TE.

   The GMPLS TE MIB module (GMPLS-TE-STD-MIB) defined in this document
   extends the MPLS-TE-STD-MIB module [RFC3812] through a series of
   augmentations and sparse augmentations of the MIB tables. The only
   additions are for support of GMPLS or to support the increased
   complexity of MPLS and GMPLS systems.

   In order to migrate from MPLS-TE-STD-MIB support to GMPLS-TE-STD-MIB
   support an implementation needs only to add support for the
   additional tables and objects defined in GMPLS-TE-STD-MIB. The
   gmplsTunnelLSPEncoding may be set to tunnelLspNotGmpls to allow an
   MPLS-TE LSP tunnel to benefit from the additional objects and tables
   of GMPLS-LSR-STD-MIB without supporting the GMPLS protocols.

   The companion document for modeling and managing GMPLS based LSRs
   [GMPLSLSRMIB] extends the MPLS-LSR-STD-MIB module [RFC3813] with the
   same intentions.

   Textual conventions are defined in [RFC3811] and the
   IANA-GMPLS-TC-MIB MIB module.

2. Terminology

   This document uses terminology from the MPLS architecture document
   [RFC3031], from the GMPLS architecture document [RFC3945], and from
   the MPLS Traffic Engineering MIB [RFC3812]. Some frequently used
   terms are described next.

   An explicitly routed LSP (ERLSP) is referred to as a GMPLS tunnel. It
   consists of in-segment(s) and/or out-segment(s) at the egress/ingress
   LSRs, each segment being associated with one GMPLS enabled interface.
   These are also referred to as tunnel segments.

   Additionally, at an intermediate LSR, we model a connection as
   consisting of one or more in-segments and/or one or more
   out-segments. The binding or interconnection between in-segments and

Nadeau and Farrel            Expires March 2007                 [Page 3]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   out-segments in performed using a cross-connect.

   These segment and cross-connect objects are defined in the MPLS Label
   Switch Router MIB (MPLS-LSR-STD-MIB) [RFC3813], but see also the
   GMPLS Label Switching Router MIB (GMPLS-LSR-STD-MIB) [GMPLSLSRMIB]
   for the GMPLS-specific extensions to these objects.

3. The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB. MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI). This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

4. Outline

   Support for GMPLS traffic-engineered tunnels requires the following
   configuration.

   - Setting up tunnels with appropriate MPLS configuration parameters
     using [RFC3812].
   - Extending the tunnels with GMPLS configuration parameters.
   - Configuring tunnel loose and strict source routed hops.

   These actions may need to be accompanied with corresponding actions
   using [RFC3813] and [GMPLSLSRMIB] to establish and configure tunnel
   segments, if this is done manually. Also, the in-segment and
   out-segment performance tables, mplsInSegmentPerfTable and
   mplsOutSegmentPerfTable [RFC3813], should be used to determine
   performance of the tunnels and tunnel segments although it should be
   noted that those tables may not be appropriate for measuring
   performance on some types of GMPLS links.

4.1. Summary of GMPLS Traffic Engineering MIB Module

   The following tables contain MIB objects for performing the actions
   listed above when they cannot be performed solely using MIB objects
   defined in MPLS-TE-STD-MIB [RFC3812].

   - Tunnel Table (gmplsTunnelTable) for providing GMPLS-specific
     tunnel configuration parameters.


Nadeau and Farrel            Expires March 2007                 [Page 4]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   - Tunnel specified, actual, and computed hop tables
     (gmplsTunnelHopTable, gmplsTunnelARHopTable, and
     gmplsTunnelCHopTable) for providing additional configuration of
     strict and loose source routed tunnel hops.
   - Performance and error reporting tables (gmplsTunnelReversePerfTable
     and gmplsTunnelErrorTable).

   These tables are described in the subsequent sections.

   Additionally, the GMPLS-TE-STD-MIB module contains a new
   notification.

   - The GMPLS Tunnel Down Notification (gmplsTunnelDown) should be used
     for all GMPLS tunnels in place of the mplsTunnelDown notification
     defined in [RFC3812]. An implementation must not issue both the
     gmplsTunnelDown and the mplsTunnelDown notifications for the same
     event. As well as indicating that a tunnel has transitioned to
     operational down state, this new notification indicates the cause
     of the failure.

5. Brief Description of GMPLS TE MIB Objects

   The objects described in this section support the functionality
   described in [RFC3473] and [RFC3472] for GMPLS tunnels. The tables
   support both manually configured and signaled tunnels.

5.1. gmplsTunnelTable

   The gmplsTunnelTable extends the MPLS traffic engineering MIB module
   (MPLS-TE-STD-MIB [RFC3812]) to allow GMPLS tunnels to be created
   between an LSR and a remote endpoint, and existing GMPLS tunnels to
   be reconfigured or removed.

   Note that we only support point-to-point tunnel segments, although
   multi-point-to-point and point-to-multi-point connections are
   supported by an LSR acting as a cross-connect.

   Each tunnel can thus have one out-segment originating at an LSR
   and/or one in-segment terminating at that LSR.

   Three objects within this table utilize enumerations in order to map
   to enumerations that are used in GMPLS signaling. In order to protect
   the GMPLS-TE-STD-MIB module from changes (in particular, extensions)
   to the range of enumerations supported by the signaling protocols,
   these MIB objects use Textual Conventions with values maintained by
   IANA. For further details, see the IANA Considerations section of
   this document.




Nadeau and Farrel            Expires March 2007                 [Page 5]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

5.2. gmplsTunnelHopTable

   The gmplsTunnelHopTable is used to indicate additional parameters for
   the hops, strict or loose, of a GMPLS tunnel defined in
   gmplsTunnelTable, when it is established using signaling. Multiple
   tunnels may share hops by pointing to the same entry in this table.

5.3. gmplsTunnelARHopTable

   The gmplsTunnelARHopTable is used to indicate the actual hops
   traversed by a tunnel as reported by the signaling protocol after the
   tunnel is setup. The support of this table is optional since not all
   GMPLS signaling protocols support this feature.

5.4. gmplsTunnelCHopTable

   The gmplsTunnelCHopTable lists the actual hops computed by a
   constraint-based routing algorithm based on the gmplsTunnelHopTable.
   The support of this table is optional since not all implementations
   support computation of hop lists using a constraint-based routing
   protocol.

5.5. gmplsTunnelErrorTable

   The gmplsTunnelErrorTable provides access to information about the
   last error that occurred on each tunnel known about by the MIB. It
   indicates the nature of the error, when and how it was reported and
   can give recovery advice through an admin string.

5.6. gmplsTunnelReversePerfTable

   gmplsTunnelReversePerfTable provides additional counters to measure
   the performance of bidirectional GMPLS tunnels in which packets are
   visible. It supplements the counters in mplsTunnelPerfTable and
   augments gmplsTunnelTable.

   Note that not all counters may be appropriate or available for some
   types of tunnel.

5.7.  Use of 32-bit and 64-bit Counters

   64-bit counters are provided in the GMPLS-TE-STD-MIB module for
   high-speed interfaces where the use of 32-bit counters might be
   impractical. The requirements on the use of 32-bit and 64-bit
   counters (copied verbatim from [RFC2863]) are as follows:

   For interfaces that operate at 20,000,000 (20 million) bits per
   second or less, 32-bit byte and packet counters MUST be supported.
   For interfaces that operate faster than 20,000,000 bits/second, and
   slower than 650,000,000 bits/second, 32-bit packet counters MUST be

Nadeau and Farrel            Expires March 2007                 [Page 6]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   supported and 64-bit octet counters MUST be supported.  For
   interfaces that operate at 650,000,000 bits/second or faster, 64-bit
   packet counters AND 64-bit octet counters MUST be supported.

6. Cross-referencing to the gmplsLabelTable

   The gmplsLabelTable is found in the GMPLS-LABEL-STD-MIB module in
   [GMPLSLSRMIB] and provides a way to model labels in a GMPLS system
   where labels might not be simple 32 bit integers.

   The hop tables in this document (gmplsTunnelHopTable,
   gmplsTunnelCHopTable and gmplsTunnelARHopTable) and the segment
   tables in the [RFC3813] (mplsInSegmentTable and mplsOutSegmentTable)
   contain objects with syntax MplsLabel.

   MplsLabel (defined in [RFC3811]) is a 32-bit integer that is capable
   of representing any MPLS label and most GMPLS labels. However, some
   GMPLS labels are larger than 32 bits and may be of arbitrary length.
   Further, some labels that may be safely encoded in 32 bits are
   constructed from multiple sub-fields. Additionally, some GMPLS
   technologies support the concatenation of individual labels to
   represent a data flow carried as multiple sub-flows.

   These GMPLS cases require that something other than a simple 32-bit
   integer is made available to represent the labels. This is achieved
   through the gmplsLabelTable contained in the GMPLS-LABEL-STD-MIB
   [GMPLSLSRMIB].

   The tables in this document and [RFC3813] that include objects with
   syntax MplsLabel also include companion objects that are row
   pointers. If the row pointer is set to zeroDotZero (0.0) then object
   of syntax MplsLabel contains the label encoded as a 32-bit integer.
   But otherwise the row pointer indicates a row in another MIB table
   that includes the label. In these cases, the row pointer may indicate
   a row in the gmplsLabelTable.

   This provides both a good way to support legacy systems that
   implement the MPLS-TE-STD-MIB [RFC3812], and a significant
   simplification in GMPLS systems that are limited to a single, simple
   label type.

   Note that gmplsLabelTable supports concatenated labels through the
   use of a label sub-index (gmplsLabelSubindex).

7. Example of GMPLS Tunnel Setup

   This section contains an example of which MIB objects should be
   modified to create a GMPLS tunnel. This example shows a best effort,
   loosely routed, bidirectional traffic engineered tunnel, which spans
   two hops of a simple network, uses Generalized Label requests with

Nadeau and Farrel            Expires March 2007                 [Page 7]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   Lambda encoding, has label recording and shared link layer
   protection. Note that these objects should be created on the
   "head-end" LSR.

   First in the mplsTunnelTable:

   {
     mplsTunnelIndex                = 1,
     mplsTunnelInstance             = 1,
     mplsTunnelIngressLSRId         = 192.0.2.1,
     mplsTunnelEgressLSRId          = 192.0.2.2,
     mplsTunnelName                 = "My first tunnel",
     mplsTunnelDescr                = "Here to there and back again",
     mplsTunnelIsIf                 = true (1),
     mplsTunnelXCPointer            = mplsXCIndex.3.0.0.12,
     mplsTunnelSignallingProto      = none (1),
     mplsTunnelSetupPrio            = 0,
     mplsTunnelHoldingPrio          = 0,
     mplsTunnelSessionAttributes    = recordRoute (4),
     mplsTunnelOwner                = snmp (2),
     mplsTunnelLocalProtectInUse    = false (2),
     mplsTunnelResourcePointer      = mplsTunnelResourceIndex.6,
     mplsTunnelInstancePriority     = 1,
     mplsTunnelHopTableIndex        = 1,
     mplsTunnelPrimaryInstance      = 0,
     mplsTunnelIncludeAnyAffinity   = 0,
     mplsTunnelIncludeAllAffinity   = 0,
     mplsTunnelExcludeAnyAffinity   = 0,
     mplsTunnelPathInUse            = 1,
     mplsTunnelRole                 = head(1),
     mplsTunnelRowStatus            = createAndWait (5),
   }

   In gmplsTunnelTable(1,1,192.0.2.1,192.0.2.2):
   {
     gmplsTunnelUnnumIf             = true (1),
     gmplsTunnelAttributes          = labelRecordingRequired (1),
     gmplsTunnelLSPEncoding         = tunnelLspLambda,
     gmplsTunnelSwitchingType       = lsc,
     gmplsTunnelLinkProtection      = shared (2),
     gmplsTunnelGPid                = lambda,
     gmplsTunnelSecondary           = false (2),
     gmplsTunnelDirection           = bidirectional (1)
     gmplsTunnelPathComp            = explicit(2),
     gmplsTunnelSendPathNotifyRecipientType = ipv4(1),
     gmplsTunnelSendPathNotifyRecipient     = 'C0000201'H,
     gmplsTunnelAdminStatusFlags    = 0,
     gmplsTunnelExtraParamsPtr      = 0.0
   }


Nadeau and Farrel            Expires March 2007                 [Page 8]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   Entries in the mplsTunnelResourceTable, mplsTunnelHopTable and
   gmplsTunnelHopTable are created and activated at this time.

   In mplsTunnelResourceTable:
   {
     mplsTunnelResourceIndex        = 6,
     mplsTunnelResourceMaxRate      = 0,
     mplsTunnelResourceMeanRate     = 0,
     mplsTunnelResourceMaxBurstSize = 0,
     mplsTunnelResourceRowStatus    = createAndGo (4)
   }

   The next two instances of mplsTunnelHopEntry are used to denote the
   hops this tunnel will take across the network.

   The following denotes the beginning of the network, or the first hop.
   We have used the fictitious LSR identified by "192.0.2.1" as our
   example head-end router.

   In mplsTunnelHopTable:
   {
     mplsTunnelHopListIndex         = 1,
     mplsTunnelPathOptionIndex      = 1,
     mplsTunnelHopIndex             = 1,
     mplsTunnelHopAddrType          = ipV4 (1),
     mplsTunnelHopIpv4Addr          = 192.0.2.1,
     mplsTunnelHopIpv4PrefixLen     = 9,
     mplsTunnelHopType              = strict (1),
     mplsTunnelHopRowStatus         = createAndWait (5),
   }

   The following denotes the end of the network, or the last hop in our
   example. We have used the fictitious LSR identified by
   "192.0.2.2" as our tail end router.

   In mplsTunnelHopTable:
   {
     mplsTunnelHopListIndex         = 1,
     mplsTunnelPathOptionIndex      = 1,
     mplsTunnelHopIndex             = 2,
     mplsTunnelHopAddrType          = ipV4 (1),
     mplsTunnelHopIpv4Addr          = 192.0.2.2,
     mplsTunnelHopIpv4PrefixLen     = 9,
     mplsTunnelHopType              = loose (2),
     mplsTunnelHopRowStatus         = createAndGo (4)
   }

   Now an associated entry in the gmplsTunnelHopTable is created to
   provide additional GMPLS hop configuration indicating that the first
   hop is an unnumbered link using explicit forward and reverse labels.

Nadeau and Farrel            Expires March 2007                 [Page 9]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   An entry in the gmplsLabelTable is created first to include the
   explicit label.

   In gmplsLabelTable:
   {
     gmplsLabelInterface            = 2,
     gmplsLabelIndex                = 1,
     gmplsLabelSubindex             = 0,
     gmplsLabelType                 = gmplsFreeformLabel(3),
     gmplsLabelFreeform             = 0xFEDCBA9876543210
     gmplsLabelRowStatus            = createAndGo(4)
   }

   In gmplsTunnelHopTable(1,1,1):
   {
     gmplsTunnelHopLabelStatuses           = forwardPresent(0)
                                                +reversePresent(1),
     gmplsTunnelHopExplicitForwardLabelPtr = gmplsLabelTable (2, 1, 0)
     gmplsTunnelHopExplicitReverseLabelPtr = gmplsLabelTable (2, 1, 0)
   }

   The first hop is now activated:

   In mplsTunnelHopTable(1,1,1):
   {
     mplsTunnelHopRowStatus         = active (1)
   }

   No gmplsTunnelHopEntry is created for the second hop as it contains
   no special GMPLS features.

   Finally the mplsTunnelEntry is activated:

   In mplsTunnelTable(1,1,192.0.2.1,192.0.2.2)
   {
     mplsTunnelRowStatus            = active(1)
   }














Nadeau and Farrel            Expires March 2007                [Page 10]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

8. GMPLS Traffic Engineering MIB Module

   This MIB module makes references to the following documents.
   [RCF2205], [RFC2578], [RFC2579], [RFC2580], [RFC3209], [RFC3411],
   [RFC3471], [RFC3473], [RFC3477], [RFC3812], [RFC4001], and
   [RFC4202].

GMPLS-TE-STD-MIB DEFINITIONS ::= BEGIN

   IMPORTS
     MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
     Unsigned32, Counter32, Counter64, zeroDotZero, Gauge32
       FROM SNMPv2-SMI                                   -- RFC2578
     MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
       FROM SNMPv2-CONF                                  -- RFC2580
     TruthValue, TimeStamp, RowPointer
       FROM SNMPv2-TC                                    -- RFC2579
     InetAddress, InetAddressType
       FROM INET-ADDRESS-MIB                             -- RFC4001
     SnmpAdminString
       FROM SNMP-FRAMEWORK-MIB                           -- RFC3411
     mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId,
     mplsTunnelEgressLSRId, mplsTunnelHopListIndex,
     mplsTunnelHopPathOptionIndex, mplsTunnelHopIndex,
     mplsTunnelARHopListIndex, mplsTunnelARHopIndex,
     mplsTunnelCHopListIndex, mplsTunnelCHopIndex,
     mplsTunnelEntry,
     mplsTunnelAdminStatus, mplsTunnelOperStatus,
     mplsTunnelGroup, mplsTunnelScalarGroup
       FROM MPLS-TE-STD-MIB                              -- RFC3812
     IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC,
     IANAGmplsGeneralizedPidTC, IANAGmplsAdminStatusInformationTC
       FROM IANA-GMPLS-TC-MIB
     mplsStdMIB
       FROM MPLS-TC-STD-MIB                              -- RFC3811
   ;

   gmplsTeStdMIB MODULE-IDENTITY
         LAST-UPDATED
            "200609060001Z" -- 06 September 2006 00:00:01 GMT
         ORGANIZATION
           "IETF Common Control And Measurement Plane (CCAMP) Working
            Group"
         CONTACT-INFO
           "       Thomas D. Nadeau
                   Cisco Systems, Inc.
            Email: tnadeau@cisco.com
                   Adrian Farrel
                   Old Dog Consulting
            Email: adrian@olddog.co.uk

Nadeau and Farrel            Expires March 2007                [Page 11]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

            Comments about this document should be emailed direct to the
            CCAMP working group mailing list at ccamp@ops.ietf.org"

         DESCRIPTION
           "Copyright (C) The Internet Society (2006).  This version of
            this MIB module is part of RFC XXX; see the RFC itself for
            full legal notices.
-- RFC Ed. Please replace XXX above with the correct RFC number and
-- remove this note.

            This MIB module contains managed object definitions
            for GMPLS Traffic Engineering (TE) as defined in:
            1. Generalized Multi-Protocol Label Switching (GMPLS)
               Signaling Functional Description, Berger, L. (Editor),
               RFC 3471, January 2003.
            2. Generalized MPLS Signaling - RSVP-TE Extensions, Berger,
               L. (Editor), RFC 3473, January 2003.
            "
         REVISION
           "200609060001Z" -- 06 September 2006 00:00:01 GMT
         DESCRIPTION
           "Initial version issued as part of RFC XXX."
   ::= { mplsStdMIB YYY }

-- RFC Editor. Please replace XXX above with the correct RFC number and
-- remove this note.

-- RFC Editor. Please replace YYY above with the OID assigned by IANA
-- and remove this note

   gmplsTeNotifications OBJECT IDENTIFIER ::= { gmplsTeStdMIB 0 }
   gmplsTeScalars OBJECT IDENTIFIER ::= { gmplsTeStdMIB 1 }
   gmplsTeObjects OBJECT IDENTIFIER ::= { gmplsTeStdMIB 2 }
   gmplsTeConformance OBJECT IDENTIFIER ::= { gmplsTeStdMIB 3 }

   gmplsTunnelsConfigured OBJECT-TYPE
     SYNTAX  Gauge32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "The number of GMPLS tunnels configured on this device. A GMPLS
        tunnel is considered configured if an entry for the tunnel
        exists in the gmplsTunnelTable and the associated
        mplsTunnelRowStatus is active(1)."
   ::= { gmplsTeScalars 1 }






Nadeau and Farrel            Expires March 2007                [Page 12]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelsActive OBJECT-TYPE
     SYNTAX  Gauge32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "The number of GMPLS tunnels active on this device. A GMPLS
        tunnel is considered active if there is an entry in the
        gmplsTunnelTable and the associated mplsTunnelOperStatus for the
        tunnel is up(1)."
   ::= { gmplsTeScalars 2 }

   gmplsTunnelTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF GmplsTunnelEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "The gmplsTunnelTable sparsely extends the mplsTunnelTable of
        MPLS-TE-STD-MIB. It allows GMPLS tunnels to be created between
        an LSR and a remote endpoint, and existing tunnels to be
        reconfigured or removed.

        Note that only point-to-point tunnel segments are supported,
        although multi-point-to-point and point-to-multi-point
        connections are supported by an LSR acting as a cross-connect.
        Each tunnel can thus have one out-segment originating at this
        LSR and/or one in-segment terminating at this LSR.

        The row status of an entry in this table is controlled by
        mplsTunnelRowStatus in the corresponding entry in
        mplsTunnelTable. When the corresponding mplsTunnelRowStatus has
        value active(1) a row in this table may not be created or
        modified.

        The exception to this rule is the
        gmplsTunnelAdminStatusInformation object, which can be modified
        whilst the tunnel is active."
     REFERENCE
       "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
           Management Information Base (MIB), RFC 3812."
   ::= { gmplsTeObjects 1 }

   gmplsTunnelEntry OBJECT-TYPE
     SYNTAX  GmplsTunnelEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in this table in association with the corresponding
        entry in the mplsTunnelTable represents a GMPLS tunnel.



Nadeau and Farrel            Expires March 2007                [Page 13]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        An entry can be created by a network administrator via SNMP SET
        commands, or in response to signaling protocol events."
     INDEX {
       mplsTunnelIndex,
       mplsTunnelInstance,
       mplsTunnelIngressLSRId,
       mplsTunnelEgressLSRId
     }
   ::= { gmplsTunnelTable 1 }

  GmplsTunnelEntry ::= SEQUENCE {
   gmplsTunnelUnnumIf                       TruthValue,
   gmplsTunnelAttributes                    BITS,
   gmplsTunnelLSPEncoding                   IANAGmplsLSPEncodingTypeTC,
   gmplsTunnelSwitchingType                 IANAGmplsSwitchingTypeTC,
   gmplsTunnelLinkProtection                BITS,
   gmplsTunnelGPid                          IANAGmplsGeneralizedPidTC,
   gmplsTunnelSecondary                     TruthValue,
   gmplsTunnelDirection                     INTEGER,
   gmplsTunnelPathComp                      INTEGER,
   gmplsTunnelUpstreamNotifyRecipientType   InetAddressType,
   gmplsTunnelUpstreamNotifyRecipient       InetAddress,
   gmplsTunnelSendResvNotifyRecipientType   InetAddressType,
   gmplsTunnelSendResvNotifyRecipient       InetAddress,
   gmplsTunnelDownstreamNotifyRecipientType InetAddressType,
   gmplsTunnelDownstreamNotifyRecipient     InetAddress,
   gmplsTunnelSendPathNotifyRecipientType   InetAddressType,
   gmplsTunnelSendPathNotifyRecipient       InetAddress,
   gmplsTunnelAdminStatusFlags        IANAGmplsAdminStatusInformationTC,
   gmplsTunnelExtraParamsPtr                RowPointer
   }

   gmplsTunnelUnnumIf OBJECT-TYPE
     SYNTAX  TruthValue
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "Denotes whether or not this tunnel corresponds to an unnumbered
        interface represented by an entry in the interfaces group table
        (the ifTable) with ifType set to mpls (166).

        This object is only used if mplsTunnelIsIf is set to 'true'.

        If both this object and the mplsTunnelIsIf object are set to
        'true', the originating LSR adds an LSP_TUNNEL_INTERFACE_ID
        object to the outgoing Path message.

        This object contains information that is only used by the
        terminating LSR."


Nadeau and Farrel            Expires March 2007                [Page 14]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

     REFERENCE
       "1. Signalling Unnumbered Links in RSVP-TE, RFC 3477."
     DEFVAL  { false }
   ::= { gmplsTunnelEntry 1 }

   gmplsTunnelAttributes OBJECT-TYPE
     SYNTAX BITS {
       labelRecordingDesired (0)
     }
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "This bitmask indicates optional parameters for this tunnel.
        These bits should be taken in addition to those defined in
        mplsTunnelSessionAttributes in order to determine the full set
        of options to be signaled (for example SESSION_ATTRIBUTES flags
        in RSVP-TE). The following describes these bitfields:

        labelRecordingDesired
          This flag is set to indicate that label information should be
          included when doing a route record. This bit is not valid
          unless the recordRoute bit is set."
     REFERENCE
       "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
           sections 4.4.3, 4.7.1 and 4.7.2."
     DEFVAL  { { } }
   ::= { gmplsTunnelEntry 2 }

   gmplsTunnelLSPEncoding OBJECT-TYPE
     SYNTAX  IANAGmplsLSPEncodingTypeTC
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "This object indicates the encoding of the LSP being requested.

        A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is
        not in use. Some objects in this MIB module may be of use for
        MPLS signaling extensions that do not use GMPLS signaling. By
        setting this object to 'tunnelLspNotGmpls', an application may
        indicate that only those objects meaningful in MPLS should be
        examined.

        The values to use are defined in the textual convention
        IANAGmplsLSPEncodingTypeTC found in the IANA-GMPLS-TC-MIB
        module."
     DEFVAL  { tunnelLspNotGmpls }
   ::= { gmplsTunnelEntry 3 }




Nadeau and Farrel            Expires March 2007                [Page 15]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelSwitchingType OBJECT-TYPE
     SYNTAX  IANAGmplsSwitchingTypeTC
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "Indicates the type of switching that should be performed on
        a particular link. This field is needed for links that
        advertise more than one type of switching capability.

        The values to use are defined in the textual convention
        IANAGmplsSwitchingTypeTC found in the IANA-GMPLS-TC-MIB module.

        This object is only meaningful if gmplsTunnelLSPEncoding is not
        set to 'tunnelLspNotGmpls'."
     DEFVAL  { unknown }
   ::= { gmplsTunnelEntry 4 }

   gmplsTunnelLinkProtection OBJECT-TYPE
     SYNTAX  BITS {
       extraTraffic(0),
       unprotected(1),
       shared (2),
       dedicatedOneToOne (3),
       dedicatedOnePlusOne(4),
       enhanced(5)
     }
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "This bitmask indicates the level of link protection required. A
        value of zero (no bits set) indicates that any protection may be
        used. The following describes these bitfields:

        extraTraffic
          This flag is set to indicate that the LSP should use links
          that are protecting other (primary) traffic. Such LSPs may be
          preempted when the links carrying the (primary) traffic being
          protected fail.

        unprotected
          This flag is set to indicate that the LSP should not use any
          link layer protection.

        shared
          This flag is set to indicate that a shared link layer
          protection scheme, such as 1:N protection, should be used to
          support the LSP.




Nadeau and Farrel            Expires March 2007                [Page 16]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        dedicatedOneToOne
          This flag is set to indicate that a dedicated link layer
          protection scheme, i.e., 1:1 protection, should be used to
          support the LSP.

        dedicatedOnePlusOne
          This flag is set to indicate that a dedicated link layer
          protection scheme, i.e., 1+1 protection, should be used to
          support the LSP.

        enhanced
          This flag is set to indicate that a protection scheme that is
          more reliable than Dedicated 1+1 should be used, e.g., 4 fiber
          BLSR/MS-SPRING.

        This object is only meaningful if gmplsTunnelLSPEncoding is
        not set to 'tunnelLspNotGmpls'."

     REFERENCE
        "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
            Functional Description, RFC 3471, section 7.1."
     DEFVAL  { { } }
   ::= { gmplsTunnelEntry 5 }

   gmplsTunnelGPid OBJECT-TYPE
     SYNTAX  IANAGmplsGeneralizedPidTC
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "This object indicates the payload carried by the LSP. It is only
        required when GMPLS will be used for this LSP.

        The values to use are defined in the textual convention
        IANAGmplsGeneralizedPidTC found in the IANA-GMPLS-TC-MIB module.

        This object is only meaningful if gmplsTunnelLSPEncoding is not
        set to 'tunnelLspNotGmpls'."
     DEFVAL  { unknown }
   ::= { gmplsTunnelEntry 6 }

   gmplsTunnelSecondary OBJECT-TYPE
     SYNTAX  TruthValue
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "Indicates that the requested LSP is a secondary LSP.

        This object is only meaningful if gmplsTunnelLSPEncoding is not
        set to 'tunnelLspNotGmpls'."


Nadeau and Farrel            Expires March 2007                [Page 17]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

     REFERENCE
       "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
           Functional Description, RFC 3471, section 7.1."
     DEFVAL  { false }
   ::= { gmplsTunnelEntry 7 }

   gmplsTunnelDirection OBJECT-TYPE
     SYNTAX  INTEGER {
       forward (0),
       bidirectional (1)
     }
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "Whether this tunnel carries forward data only (is
        unidirectional) or is bidirectional.

        Values of this object other than 'forward' are meaningful
        only if gmplsTunnelLSPEncoding is not set to
        'tunnelLspNotGmpls'."
     DEFVAL { forward }
   ::= { gmplsTunnelEntry 8 }

   gmplsTunnelPathComp OBJECT-TYPE
     SYNTAX  INTEGER {
       dynamicFull(1),   -- CSPF fully computed
       explicit(2),      -- fully specified path
       dynamicPartial(3) -- CSPF partially computed
     }
     MAX-ACCESS read-create
     STATUS current
     DESCRIPTION
       "This value instructs the source node on how to perform path
        computation on the explicit route specified by the associated
        entries in the gmplsTunnelHopTable.

        dynamicFull
          The user specifies at least the source and
          destination of the path and expects that the CSPF
          will calculate the remainder of the path.

        explicit
          The user specifies the entire path for the tunnel to
          take. This path may contain strict or loose hops.
          Evaluation of the explicit route will be performed
          hop by hop through the network.





Nadeau and Farrel            Expires March 2007                [Page 18]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        dynamicPartial
          The user specifies at least the source and
          destination of the path and expects that the CSPF
          will calculate the remainder of the path. The path
          computed by CSPF is allowed to be only partially
          computed allowing the remainder of the path to be
          filled in across the network.

        When an entry is present in gmplsTunnelTable for a tunnel,
        gmplsTunnelPathComp MUST be used and any corresponding
        mplsTunnelHopEntryPathComp object in the mplsTunnelHopTable
        MUST be ignored and SHOULD not be set.

        mplsTunnelHopTable and mplsTunnelHopEntryPathComp are part of
        MPLS-TE-STD-MIB.

        This object should be ignored if value of gmplsTunnelLSPEncoding
        is 'tunnelLspNotGmpls'."
     REFERENCE
       "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
           Management Information Base (MIB), RFC 3812."
     DEFVAL { dynamicFull }
   ::= { gmplsTunnelEntry 9 }

   gmplsTunnelUpstreamNotifyRecipientType OBJECT-TYPE
     SYNTAX  InetAddressType
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
      "This object is used to aid in interpretation of
       gmplsTunnelUpstreamNotifyRecipient."
     DEFVAL { unknown }
   ::= { gmplsTunnelEntry 10 }

   gmplsTunnelUpstreamNotifyRecipient OBJECT-TYPE
     SYNTAX  InetAddress
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "Indicates the address of the upstream recipient for Notify
        messages relating to this tunnel and issued by this LSR. This
        information is typically received from an upstream LSR in a Path
        message.

        This object is only valid when signaling a tunnel using RSVP.

        It is also not valid at the head end of a tunnel since there are
        no upstream LSRs to which to send a Notify message.



Nadeau and Farrel            Expires March 2007                [Page 19]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        This object is interpreted in the context of the value of
        gmplsTunnelUpstreamNotifyRecipient. If this object is set to 0,
        the value of gmplsTunnelUpstreamNotifyRecipient MUST be set to
        unknown(0)."
     REFERENCE
       "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
           section 4.2. "
     DEFVAL { '00000000'H } -- 0.0.0.0
   ::= { gmplsTunnelEntry 11 }

   gmplsTunnelSendResvNotifyRecipientType OBJECT-TYPE
     SYNTAX  InetAddressType
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
      "This object is used to aid in interpretation of
       gmplsTunnelSendResvNotifyRecipient."
     DEFVAL { unknown }
   ::= { gmplsTunnelEntry 12 }

   gmplsTunnelSendResvNotifyRecipient OBJECT-TYPE
     SYNTAX  InetAddress
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "Indicates to an upstream LSR the address to which it should send
        downstream Notify messages relating to this tunnel.

        This object is only valid when signaling a tunnel using RSVP.

        It is also not valid at the head end of the tunnel since no Resv
        messages are sent from that LSR for this tunnel.

        If set to 0, no Notify Request object will be included in the
        outgoing Resv messages.

        This object is interpreted in the context of the value of
        gmplsTunnelSendResvNotifyRecipientType. If this object is set to
        0, the value of gmplsTunnelSendResvNotifyRecipientType MUST be
        set to unknown(0)."
     REFERENCE
       "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
           section 4.2. "
     DEFVAL { '00000000'H } -- 0.0.0.0
   ::= { gmplsTunnelEntry 13 }






Nadeau and Farrel            Expires March 2007                [Page 20]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelDownstreamNotifyRecipientType OBJECT-TYPE
     SYNTAX  InetAddressType
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
      "This object is used to aid in interpretation of
       gmplsTunnelDownstreamNotifyRecipient."
     DEFVAL { unknown }
   ::= { gmplsTunnelEntry 14 }

   gmplsTunnelDownstreamNotifyRecipient OBJECT-TYPE
     SYNTAX  InetAddress
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "Indicates the address of the downstream recipient for Notify
        messages relating to this tunnel and issued by this LSR. This
        information is typically received from an upstream LSR in a Resv
        message. This object is only valid when signaling a tunnel using
        RSVP.

        It is also not valid at the tail end of a tunnel since there are
        no downstream LSRs to which to send a Notify message.
        This object is interpreted in the context of the value of
        gmplsTunnelDownstreamNotifyRecipient. If this object is set to
        0, the value of gmplsTunnelDownstreamNotifyRecipient MUST be set
        to unknown(0)."
     REFERENCE
       "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
           section 4.2.
       "
     DEFVAL { '00000000'H } -- 0.0.0.0
   ::= { gmplsTunnelEntry 15 }

   gmplsTunnelSendPathNotifyRecipientType OBJECT-TYPE
     SYNTAX  InetAddressType
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
      "This object is used to aid in interpretation of
       gmplsTunnelSendPathNotifyRecipient."
     DEFVAL { unknown }
   ::= { gmplsTunnelEntry 16 }

   gmplsTunnelSendPathNotifyRecipient OBJECT-TYPE
     SYNTAX  InetAddress
     MAX-ACCESS read-create
     STATUS  current



Nadeau and Farrel            Expires March 2007                [Page 21]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

     DESCRIPTION
       "Indicates to a downstream LSR the address to which it should
        send upstream Notify messages relating to this tunnel.

        This object is only valid when signaling a tunnel using RSVP.

        It is also not valid at the tail end of the tunnel since no Path
        messages are sent from that LSR for this tunnel.

        If set to 0, no Notify Request object will be included in the
        outgoing Path messages.

        This object is interpreted in the context of the value of
        gmplsTunnelSendPathNotifyRecipientType. If this object is set to
        0, the value of gmplsTunnelSendPathNotifyRecipientType MUST be
        set to unknown(0)."

     REFERENCE
       "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
           section 4.2. "
     DEFVAL { '00000000'H } -- 0.0.0.0
   ::= { gmplsTunnelEntry 17 }

   gmplsTunnelAdminStatusFlags OBJECT-TYPE
      SYNTAX   IANAGmplsAdminStatusInformationTC
      MAX-ACCESS   read-create
      STATUS       current
      DESCRIPTION
        "Determines the setting of the Admin Status flags in the
         Admin Status object or TLV, as described in RFC 3471. Setting
         this field to a non-zero value will result in the inclusion of
         the admin status object on signaling messages.

         The values to use are defined in the textual convention
         IANAGmplsAdminStatusInformationTC found in the
         IANA-GMPLS-TC-MIB module.

         This value of this object can be modified when the
         corresponding mplsTunnelRowStatus and mplsTunnelAdminStatus
         is active(1). By doing so, a new signaling message will be
         triggered including the requested Admin Status object or
         TLV."
     REFERENCE
       "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
           Functional Description, RFC 3471, section 8."
     DEFVAL  { { } }
     ::= { gmplsTunnelEntry 18 }




Nadeau and Farrel            Expires March 2007                [Page 22]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelExtraParamsPtr  OBJECT-TYPE
     SYNTAX       RowPointer
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
       "Some Tunnels will run over transports that can usefully support
        technology-specific additional parameters (for example, SONET
        resource usage). Such parameters can be supplied in an external
        table and referenced from here.

        A value of zeroDotzero in this attribute indicates that there
        is no such additional information."
     DEFVAL  { zeroDotZero }
     ::= { gmplsTunnelEntry 19 }

   gmplsTunnelHopTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF GmplsTunnelHopEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "The gmplsTunnelHopTable sparsely extends the mplsTunnelHopTable
        of MPLS-TE-STD-MIB. It is used to indicate the explicit labels
        to be used in an explicit path for a GMPLS tunnel defined in
        mplsTunnelTable and gmplsTunnelTable, when it is established
        using signaling. It does not insert new hops, but does define
        new values for hops defined in mplsTunnelHopTable.

        Each row in this table is indexed by the same indexes as
        mplsTunnelHopTable. It is acceptable for some rows in
        mplsTunnelHopTable to have corresponding entries in this table
        and some to have no corresponding entry in this table.

        The storage type for this entry is given by the value
        of mplsTunnelHopStorageType in the corresponding entry in the
        mplsTunnelHopTable.

        The row status of an entry in this table is controlled by
        mplsTunnelHopRowStatus in the corresponding entry in
        mplsTunnelHopTable. That is, it is not permitted to create a row
        in this table, nor to modify an existing row, when the
        corresponding mplsTunnelHopRowStatus has value active(1)."
     REFERENCE
       "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
           Management Information Base (MIB), RFC 3812.
        2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473.
       "
   ::= { gmplsTeObjects 2 }




Nadeau and Farrel            Expires March 2007                [Page 23]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelHopEntry  OBJECT-TYPE
     SYNTAX  GmplsTunnelHopEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in this table represents additions to a tunnel hop
        defined in mplsTunnelHopEntry. At an ingress to a tunnel an
        entry in this table is created by a network administrator for an
        ERLSP to be set up by a signaling protocol. At transit and
        egress nodes an entry in this table may be used to represent the
        explicit path instructions received using the signaling
        protocol."
     INDEX {
       mplsTunnelHopListIndex,
       mplsTunnelHopPathOptionIndex,
       mplsTunnelHopIndex
     }
   ::= { gmplsTunnelHopTable 1 }

   GmplsTunnelHopEntry ::= SEQUENCE {
     gmplsTunnelHopLabelStatuses           BITS,
     gmplsTunnelHopExplicitForwardLabel    Unsigned32,
     gmplsTunnelHopExplicitForwardLabelPtr RowPointer,
     gmplsTunnelHopExplicitReverseLabel    Unsigned32,
     gmplsTunnelHopExplicitReverseLabelPtr RowPointer
   }

   gmplsTunnelHopLabelStatuses OBJECT-TYPE
     SYNTAX  BITS {
       forwardPresent (0),
       reversePresent (1)
     }
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "This bitmask indicates the presence of labels indicated by the
        gmplsTunnelHopExplicitForwardLabel or
        gmplsTunnelHopExplicitForwardLabelPtr, and
        gmplsTunnelHopExplicitReverseLabel or
        gmplsTunnelHopExplicitReverseLabel objects.

        For the Present bits, a set bit indicates that a label is
        present for this hop in the route. This allows zero to be a
        valid label value."
     DEFVAL  { { } }
   ::= { gmplsTunnelHopEntry 1 }





Nadeau and Farrel            Expires March 2007                [Page 24]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelHopExplicitForwardLabel OBJECT-TYPE
     SYNTAX  Unsigned32
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "If gmplsTunnelHopLabelStatuses object indicates that a forward
        label is present and gmplsTunnelHopExplicitForwardLabelPtr
        contains the value zeroDotZero, then the label to use on this
        hop is represented by the value of this object."
   ::= { gmplsTunnelHopEntry 2 }

   gmplsTunnelHopExplicitForwardLabelPtr OBJECT-TYPE
     SYNTAX  RowPointer
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelHopLabelStatuses object indicates that a
        forward label is present, this object contains a pointer to a
        row in another MIB table (such as the gmplsLabelTable of
        GMPLS-LABEL-STD-MIB) that contains the label to use on this hop
        in the forward direction.

        If the gmplsTunnelHopLabelStatuses object indicates that a
        forward label is present and this object contains the value
        zeroDotZero, then the label to use on this hop is found in the
        gmplsTunnelHopExplicitForwardLabel object."
     DEFVAL  { zeroDotZero }
   ::= { gmplsTunnelHopEntry 3 }

   gmplsTunnelHopExplicitReverseLabel OBJECT-TYPE
     SYNTAX  Unsigned32
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelHopLabelStatuses object indicates that a
        reverse label is present and
        gmplsTunnelHopExplicitReverseLabelPtr contains the value
        zeroDotZero, then the label to use on this this hop is found in
        this object encoded as a 32-bit integer."
   ::= { gmplsTunnelHopEntry 4 }

   gmplsTunnelHopExplicitReverseLabelPtr OBJECT-TYPE
     SYNTAX  RowPointer
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelHopLabelStatuses object indicates that a
        reverse label is present, this object contains a pointer to a
        row in another MIB table (such as the gmplsLabelTable of the
        GMPLS-LABEL-STD-MIB) that contains the label to use on this hop

Nadeau and Farrel            Expires March 2007                [Page 25]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        in the reverse direction.

        If the gmplsTunnelHopLabelStatuses object indicates that a
        reverse label is present and this object contains the value
        zeroDotZero, then the label to use on this hop is found in the
        gmplsTunnelHopExplicitReverseLabel object."
     DEFVAL  { zeroDotZero }
   ::= { gmplsTunnelHopEntry 5 }

   gmplsTunnelARHopTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF GmplsTunnelARHopEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "The gmplsTunnelARHopTable sparsely extends the
        mplsTunnelARHopTable of MPLS-TE-STD-MIB. It is used to indicate
        the labels currently in use for a GMPLS tunnel defined in
        mplsTunnelTable and gmplsTunnelTable, as reported by the
        signaling protocol. It does not insert new hops, but does define
        new values for hops defined in mplsTunnelARHopTable.

        Each row in this table is indexed by the same indexes as
        mplsTunnelARHopTable. It is acceptable for some rows in
        mplsTunnelARHopTable to have corresponding entries in this table
        and some to have no corresponding entry in this table.

        Note that since the information necessary to build entries
        within this table is not provided by some signaling protocols
        and might not be returned in all cases of other signaling
        protocols, implementation of this table and mplsTunnelARHopTable
        is optional. Furthermore, since the information in this table is
        actually provided by the signaling protocol after the path has
        been set-up, the entries in this table are provided only for
        observation, and hence, all variables in this table are
        accessible exclusively as read-only."

     REFERENCE
       "1. Extensions to RSVP for LSP Tunnels, RFC 3209.
        2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473.
        3. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
           Management Information Base (MIB), RFC 3812."
   ::= { gmplsTeObjects 3 }

   gmplsTunnelARHopEntry  OBJECT-TYPE
     SYNTAX  GmplsTunnelARHopEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in this table represents additions to a tunnel hop
        visible in mplsTunnelARHopEntry. An entry is created by the

Nadeau and Farrel            Expires March 2007                [Page 26]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        signaling protocol for a signaled ERLSP set up by the signaling
        protocol.

        At any node on the LSP (ingress, transit or egress), this table
        and mplsTunnelARHopTable (if the tables are supported and if the
        signaling protocol is recording actual route information)
        contain the actual route of the whole tunnel. If the signaling
        protocol is not recording the actual route, this table MAY
        report the information from the gmplsTunnelHopTable or the
        gmplsTunnelCHopTable.

        Note that the recording of actual labels is distinct from the
        recording of the actual route in some signaling protocols. This
        feature is enabled using the gmplsTunnelAttributes object."
     INDEX {
       mplsTunnelARHopListIndex,
       mplsTunnelARHopIndex
     }
   ::= { gmplsTunnelARHopTable 1 }

   GmplsTunnelARHopEntry ::= SEQUENCE {
     gmplsTunnelARHopLabelStatuses           BITS,
     gmplsTunnelARHopExplicitForwardLabel    Unsigned32,
     gmplsTunnelARHopExplicitForwardLabelPtr RowPointer,
     gmplsTunnelARHopExplicitReverseLabel    Unsigned32,
     gmplsTunnelARHopExplicitReverseLabelPtr RowPointer,
     gmplsTunnelARHopProtection              BITS
   }

   gmplsTunnelARHopLabelStatuses OBJECT-TYPE
     SYNTAX  BITS {
       forwardPresent (0),
       reversePresent (1),
       forwardGlobal (2),
       reverseGlobal (3)
     }
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "This bitmask indicates the presence and status of labels
        indicated by the gmplsTunnelARHopExplicitForwardLabel or
        gmplsTunnelARHopExplicitForwardLabelPtr, and
        gmplsTunnelARHopExplicitReverseLabel or
        gmplsTunnelARHopExplicitReverseLabelPtr objects.

        For the Present bits, a set bit indicates that a label is
        present for this hop in the route. For the Global bits, a set
        bit indicates that the label comes from the Global Label Space.

        A clear bit indicates that this is a Per-Interface label. A

Nadeau and Farrel            Expires March 2007                [Page 27]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        Global bit only has meaning if the corresponding Present bit is
        set."
   ::= { gmplsTunnelARHopEntry 1 }

   gmplsTunnelARHopExplicitForwardLabel OBJECT-TYPE
     SYNTAX  Unsigned32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelARHopLabelStatuses object indicates that a
        forward label is present and
        gmplsTunnelARHopExplicitForwardLabelPtr contains the value
        zeroDotZero, then the label in use on this hop is found in this
        object encoded within a 32-bit integer."
   ::= { gmplsTunnelARHopEntry 2 }

   gmplsTunnelARHopExplicitForwardLabelPtr OBJECT-TYPE
     SYNTAX  RowPointer
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelARHopLabelStatuses object indicates that a
        forward label is present, this object contains a pointer to a
        row in another MIB table (such as the gmplsLabelTable of the
        GMPLS-LABEL-STD-MIB) that contains the label in use on this hop
        in the forward direction.

        If the gmplsTunnelARHopLabelStatuses object indicates that a
        forward label is present and this object contains the value
        zeroDotZero, then the label in use on this hop is found in the
        gmplsTunnelARHopExplicitForwardLabel object."
   ::= { gmplsTunnelARHopEntry 3 }

   gmplsTunnelARHopExplicitReverseLabel OBJECT-TYPE
     SYNTAX  Unsigned32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelARHopLabelStatuses object indicates that a
        reverse label is present and
        gmplsTunnelARHopExplicitReverseLabelPtr contains the value
        zeroDotZero, then the label in use on this hop is found in this
        object encoded as a 32-bit integer."
   ::= { gmplsTunnelARHopEntry 4 }







Nadeau and Farrel            Expires March 2007                [Page 28]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelARHopExplicitReverseLabelPtr OBJECT-TYPE
     SYNTAX  RowPointer
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelARHopLabelStatuses object indicates that a
        reverse label is present, this object contains a pointer to a
        row in another MIB table (such as the gmplsLabelTable of the
        GMPLS-LABEL-STD-MIB) that contains the label in use on this hop
        in the reverse direction.

        If the gmplsTunnelARHopLabelStatuses object indicates that a
        reverse label is present and this object contains the value
        zeroDotZero, then the label in use on this hop is found in the
        gmplsTunnelARHopExplicitReverseLabel object."
   ::= { gmplsTunnelARHopEntry 5 }

   gmplsTunnelARHopProtection  OBJECT-TYPE
     SYNTAX  BITS {
       localAvailable (0),
       localInUse (1)
     }
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "Availability and usage of protection on the reported link.

        localAvailable
          This flag is set to indicate that the link downstream of this
          node is protected via a local repair mechanism.

        localInUse
          This flag is set to indicate that a local repair mechanism is
          in use to maintain this tunnel (usually in the face of an
          outage of the link it was previously routed over)."
     REFERENCE
       "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
           section 4.4.1."
   ::= { gmplsTunnelARHopEntry 6 }

   gmplsTunnelCHopTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF GmplsTunnelCHopEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "The gmplsTunnelCHopTable sparsely extends the
        mplsTunnelCHopTable of MPLS-TE-STD-MIB. It is used to indicate
        additional information about the hops of a GMPLS tunnel defined
        in mplsTunnelTable and gmplsTunnelTable, as computed by a
        constraint-based routing protocol, based on the

Nadeau and Farrel            Expires March 2007                [Page 29]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        mplsTunnelHopTable and the gmplsTunnelHopTable.

        Each row in this table is indexed by the same indexes as
        mplsTunnelCHopTable. It is acceptable for some rows in
        mplsTunnelCHopTable to have corresponding entries in this table
        and some to have no corresponding entry in this table.

        Please note that since the information necessary to build
        entries within this table may not be supported by some LSRs,
        implementation of this table is optional.

        Furthermore, since the information in this table is actually
        provided by a path computation component after the path has been
        computed, the entries in this table are provided only for
        observation, and hence, all objects in this table are accessible
        exclusively as read-only."

     REFERENCE
       "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
           Management Information Base (MIB), RFC 3812.
        2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473."
   ::= { gmplsTeObjects 4 }

   gmplsTunnelCHopEntry  OBJECT-TYPE
     SYNTAX  GmplsTunnelCHopEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in this table represents additions to a computed tunnel
        hop visible in mplsTunnelCHopEntry. An entry is created by a
        path computation component based on the hops specified in the
        corresponding mplsTunnelHopTable and gmplsTunnelHopTable.

        At a transit LSR this table (if the table is supported) MAY
        contain the path computed by path computation engine on (or on
        behalf of) the transit LSR."
     INDEX {
       mplsTunnelCHopListIndex,
       mplsTunnelCHopIndex
     }
   ::= { gmplsTunnelCHopTable 1 }

   GmplsTunnelCHopEntry ::= SEQUENCE {
     gmplsTunnelCHopLabelStatuses           BITS,
     gmplsTunnelCHopExplicitForwardLabel    Unsigned32,
     gmplsTunnelCHopExplicitForwardLabelPtr RowPointer,
     gmplsTunnelCHopExplicitReverseLabel    Unsigned32,
     gmplsTunnelCHopExplicitReverseLabelPtr RowPointer
   }


Nadeau and Farrel            Expires March 2007                [Page 30]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelCHopLabelStatuses OBJECT-TYPE
     SYNTAX  BITS {
       forwardPresent (0),
       reversePresent (1)
     }
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "This bitmask indicates the presence of labels indicated by the
        gmplsTunnelCHopExplicitForwardLabel or
        gmplsTunnelCHopExplicitForwardLabelPtr and
        gmplsTunnelCHopExplicitReverseLabel or
        gmplsTunnelCHopExplicitReverseLabelPtr objects.
        A set bit indicates that a label is present for this hop in the
        route thus allowing zero to be a valid label value."
   ::= { gmplsTunnelCHopEntry 1 }

   gmplsTunnelCHopExplicitForwardLabel OBJECT-TYPE
     SYNTAX  Unsigned32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelCHopLabelStatuses object indicates that a
        forward label is present and
        gmplsTunnelCHopExplicitForwardLabelPtr contains the value
        zeroDotZero, then the label to use on this hop is found in this
        object encoded within a 32-bit integer."
   ::= { gmplsTunnelCHopEntry 2 }

   gmplsTunnelCHopExplicitForwardLabelPtr OBJECT-TYPE
     SYNTAX  RowPointer
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelCHopLabelStatuses object indicates that a
        forward label is present, this object contains a pointer to a
        row in another MIB table (such as the gmplsLabelTable of the
        GMPLS-LABEL-STD-MIB) that contains the label to use on this hop
        in the forward direction.

        If the gmplsTunnelCHopLabelStatuses object indicates that a
        forward label is present and this object contains the value
        zeroDotZero, then the label to use on this hop is found in the
        gmplsTunnelCHopExplicitForwardLabel object."
   ::= { gmplsTunnelCHopEntry 3 }






Nadeau and Farrel            Expires March 2007                [Page 31]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelCHopExplicitReverseLabel OBJECT-TYPE
     SYNTAX  Unsigned32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelCHopLabelStatuses object indicates that a
        reverse label is present and
        gmplsTunnelCHopExplicitReverseLabelPtr contains the value
        zeroDotZero, then the label to use on this hop is found in this
        object encoded as a 32-bit integer."
   ::= { gmplsTunnelCHopEntry 4 }

   gmplsTunnelCHopExplicitReverseLabelPtr OBJECT-TYPE
     SYNTAX  RowPointer
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "If the gmplsTunnelCHopLabelStatuses object indicates that a
        reverse label is present, this object contains a pointer to a
        row in another MIB table (such as the gmplsLabelTable of the
        GMPLS-LABEL-STD-MIB) that contains the label to use on this hop
        in the reverse direction.

        If the gmplsTunnelCHopLabelStatuses object indicates that a
        reverse label is present and this object contains the value
        zeroDotZero, then the label to use on this hop is found in the
        gmplsTunnelCHopExplicitReverseLabel object."
   ::= { gmplsTunnelCHopEntry 5 }

   gmplsTunnelReversePerfTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF GmplsTunnelReversePerfEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "This table augments the gmplsTunnelTable to provides
        per-tunnel packet performance information for the reverse
        direction of a bidirectional tunnel. It can be seen as
        supplementing the mplsTunnelPerfTable which augments the
        mplsTunnelTable.

        For links that do not transport packets, these packet counters
        cannot be maintained. For such links, attempts to read the
        objects in this table will return noSuchInstance.

        A tunnel can be known to be bidirectional by inspecting the
        gmplsTunnelDirection object."
     REFERENCE
       "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
           Management Information Base (MIB), RFC 3812."
   ::= { gmplsTeObjects 5 }

Nadeau and Farrel            Expires March 2007                [Page 32]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelReversePerfEntry OBJECT-TYPE
     SYNTAX  GmplsTunnelReversePerfEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in this table is created by the LSR for every
        bidirectional GMPLS tunnel where packets are visible to the
        LSR."
     AUGMENTS { gmplsTunnelEntry }
   ::= { gmplsTunnelReversePerfTable 1 }

   GmplsTunnelReversePerfEntry ::= SEQUENCE {
     gmplsTunnelReversePerfPackets     Counter32,
     gmplsTunnelReversePerfHCPackets   Counter64,
     gmplsTunnelReversePerfErrors      Counter32,
     gmplsTunnelReversePerfBytes       Counter32,
     gmplsTunnelReversePerfHCBytes     Counter64
   }

   gmplsTunnelReversePerfPackets OBJECT-TYPE
     SYNTAX  Counter32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "Number of packets forwarded on the tunnel in the reverse
        direction if it is bidirectional.

        This object should represents the 32-bit value of the least
        significant part of the 64-bit value if both
        gmplsTunnelReversePerfHCPackets and this object are returned.

        For links that do not transport packets, this packet counter
        cannot be maintained. For such links, this value will return a
        noSuchInstance."
   ::= { gmplsTunnelReversePerfEntry 1 }

   gmplsTunnelReversePerfHCPackets OBJECT-TYPE
     SYNTAX  Counter64
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "High capacity counter for number of packets forwarded on the
        tunnel in the reverse direction if it is bidirectional.

        For links that do not transport packets, this packet counter
        cannot be maintained. For such links, this value will return a
        noSuchInstance."
   ::= { gmplsTunnelReversePerfEntry 2 }



Nadeau and Farrel            Expires March 2007                [Page 33]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelReversePerfErrors OBJECT-TYPE
     SYNTAX  Counter32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "Number of errored packets received on the tunnel in the reverse
        direction if it is bidirectional. For links that do not
        transport packets, this packet counter cannot be maintained. For
        such links, this value will return a noSuchInstance."
   ::= { gmplsTunnelReversePerfEntry 3 }

   gmplsTunnelReversePerfBytes OBJECT-TYPE
     SYNTAX  Counter32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "Number of bytes forwarded on the tunnel in the reverse direction
        if it is bidirectional.

        This object should represents the 32-bit value of the least
        significant part of the 64-bit value if both
        gmplsTunnelReversePerfHCBytes and this object are returned.

        For links that do not transport packets, this packet counter
        cannot be maintained. For such links, this value will return a
        noSuchInstance."
   ::= { gmplsTunnelReversePerfEntry 4 }

   gmplsTunnelReversePerfHCBytes OBJECT-TYPE
     SYNTAX  Counter64
     MAX-ACCESS read-only
     STATUS  current

     DESCRIPTION
       "High capacity counter for number of bytes forwarded on the
        tunnel in the reverse direction if it is bidirectional.

        For links that do not transport packets, this packet counter
        cannot be maintained. For such links, this value will return a
        noSuchInstance."
   ::= { gmplsTunnelReversePerfEntry 5 }

   gmplsTunnelErrorTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF GmplsTunnelErrorEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "This table augments the mplsTunnelTable.

        This table provides per-tunnel information about errors. Errors

Nadeau and Farrel            Expires March 2007                [Page 34]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

        may be detected locally or reported through the signaling
        protocol. Error reporting is not exclusive to GMPLS and this
        table may be applied in MPLS systems.

        Entries in this table are not persistent over system resets
        or re-initializations of the management system."
     REFERENCE
       "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
           Management Information Base (MIB), RFC 3812."
   ::= { gmplsTeObjects 6 }

   gmplsTunnelErrorEntry OBJECT-TYPE
     SYNTAX  GmplsTunnelErrorEntry
     MAX-ACCESS not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in this table is created by the LSR for every tunnel
        where error information is visible to the LSR.

        Note that systems which read the objects in this table one
        at a time should read gmplsTunnelErrorLastTime prior to
        the first object and after reading the last object of this
        table to ensure that no additional errors occurred."
     AUGMENTS { mplsTunnelEntry }
   ::= { gmplsTunnelErrorTable 1 }

   GmplsTunnelErrorEntry ::= SEQUENCE {
     gmplsTunnelErrorLastErrorType      INTEGER,
     gmplsTunnelErrorLastTime           TimeStamp,
     gmplsTunnelErrorReporterType       InetAddressType,
     gmplsTunnelErrorReporter           InetAddress,
     gmplsTunnelErrorCode               Unsigned32,
     gmplsTunnelErrorSubcode            Unsigned32,
     gmplsTunnelErrorTLVs               OCTET STRING,
     gmplsTunnelErrorHelpString         SnmpAdminString
   }

   gmplsTunnelErrorLastErrorType OBJECT-TYPE
     SYNTAX  INTEGER {
       noError (0),
       unknown (1),
       protocol (2),
       pathComputation (3),
       localConfiguration (4),
       localResources (5),
       localOther (6)
     }
     MAX-ACCESS read-only
     STATUS  current


Nadeau and Farrel            Expires March 2007                [Page 35]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

     DESCRIPTION
       "The nature of the last error. Provides interpretation context
        for gmplsTunnelErrorProtocolCode and
        gmplsTunnelErrorProtocolSubcode.

        A value of noError (0) shows that there is no error associated
        with this tunnel and means that the other objects in this table
        entry have no meaning.

        A value of unknown (1) shows that there is an error but that no
        additional information about the cause is known. The error may
        have been received in a signaled message or generated locally.

        A value of protocol (2) or pathComputation (3) indicates the
        cause of an error and identifies an error that has been received
        through signaling or will itself be signaled.

        A value of localConfiguration (4), localResources (5) or
        localOther (6) identifies an error which has been detected
        by the local node, but which will not be reported through
        signaling."
   ::= { gmplsTunnelErrorEntry 1 }

   gmplsTunnelErrorLastTime OBJECT-TYPE
     SYNTAX  TimeStamp
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "The time at which the last error occurred. This is presented as
        the value of SysUpTime when the error occurred or was reported
        to this node.

        If gmplsTunnelErrorLastErrorType has the value noError (0), then
        this object is ignored.

        Note that entries in this table are not persistent over system
        resets or re-initializations of the management system."
   ::= { gmplsTunnelErrorEntry 2 }

   gmplsTunnelErrorReporterType OBJECT-TYPE
      SYNTAX     InetAddressType
      MAX-ACCESS read-only
      STATUS  current
      DESCRIPTION
        "The address type of the error reported.

         This object is used to aid in interpretation of
         gmplsTunnelErrorReporter."
   ::= { gmplsTunnelErrorEntry 3 }


Nadeau and Farrel            Expires March 2007                [Page 36]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelErrorReporter OBJECT-TYPE
     SYNTAX  InetAddress
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "The address of the node reporting the last error, or the address
        of the resource (such as an interface) associated with the
        error.

        If gmplsTunnelErrorLastErrorType has the value noError (0), then
        this object is ignored.

        If gmplsTunnelErrorLastErrorType has the value unknown (1),
        localConfiguration (4), localResources (5), or localOther (6)
        this object MAY contain a zero value.

        This object should be interpreted in the context of the value of
        the object gmplsTunnelErrorReporterType."
     REFERENCE
       "1. Textual Conventions for Internet Network Addresses, RFC 4001,
           section 4, Usage Hints."
   ::= { gmplsTunnelErrorEntry 4 }

   gmplsTunnelErrorCode OBJECT-TYPE
     SYNTAX  Unsigned32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "The primary error code associated with the last error.

        The interpretation of this error code depends on the value of
        gmplsTunnelErrorLastErrorType. If the value of
        gmplsTunnelErrorLastErrorType is noError (0) the value of this
        object should be 0 and should be ignored. If the value of
        gmplsTunnelErrorLastErrorType is protocol (2) the error should
        be interpreted in the context of the signaling protocol
        identified by the mplsTunnelSignallingProto object."
     REFERENCE
       "1. Resource ReserVation Protocol -- Version 1 Functional
           Specification, RFC 2205, section B.
        2. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
           section 7.3.
        3. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
           section 13.1."
   ::= { gmplsTunnelErrorEntry 5 }






Nadeau and Farrel            Expires March 2007                [Page 37]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelErrorSubcode OBJECT-TYPE
     SYNTAX  Unsigned32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "The secondary error code associated with the last error and the
        protocol used to signal this tunnel. This value is interpreted
        in the context of the value of gmplsTunnelErrorCode.
        If the value of gmplsTunnelErrorLastErrorType is noError (0) the
        value of this object should be 0 and should be ignored."
     REFERENCE
       "1. Resource ReserVation Protocol -- Version 1 Functional
           Specification, RFC 2205, section B.

        2. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
           section 7.3.
        3. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
           section 13.1. "
   ::= { gmplsTunnelErrorEntry 6 }

   gmplsTunnelErrorTLVs OBJECT-TYPE
     SYNTAX  OCTET STRING (SIZE(0..65535))
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "The sequence of interface identifier TLVs reported with the
        error by the protocol code. The interpretation of the TLVs and
        the encoding within the protocol are described in the
        references. A value of zero in the first octet indicates that no
        TLVs are present."
      REFERENCE
       "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
           section 8.2."
   ::= { gmplsTunnelErrorEntry 7 }

   gmplsTunnelErrorHelpString OBJECT-TYPE
     SYNTAX  SnmpAdminString
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       "A textual string containing information about the last error,
        recovery actions and support advice. If there is no help string
        this object contains a zero length string.
        If the value of gmplsTunnelErrorLastErrorType is noError (0)
        this object should contain a zero length string, but may contain
        a help string indicating that there is no error."
   ::= { gmplsTunnelErrorEntry 8 }




Nadeau and Farrel            Expires March 2007                [Page 38]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

--
-- Notifications
--

   gmplsTunnelDown NOTIFICATION-TYPE
   OBJECTS  {
     mplsTunnelAdminStatus,
     mplsTunnelOperStatus,
     gmplsTunnelErrorLastErrorType,
     gmplsTunnelErrorReporterType,
     gmplsTunnelErrorReporter,
     gmplsTunnelErrorCode,
     gmplsTunnelErrorSubcode
   }
   STATUS      current
   DESCRIPTION
        "This notification is generated when a mplsTunnelOperStatus
         object for a tunnel in the gmplsTunnelTable is about to enter
         the down state from some other state (but not from the
         notPresent state). This other state is indicated by the
         included value of mplsTunnelOperStatus.

         The objects in this notification provide additional error
         information that indicates the reason why the tunnel has
         transitioned down.

         Note that an implementation MUST only issue one of
         mplsTunnelDown and gmplsTunnelDown for any single event on a
         single tunnel. If the tunnel has an entry in gmplsTunnelTable
         an implementation SHOULD use gmplsTunnelDown for all tunnel
         down events and SHOULD NOT use mplsTunnelDown.

         This notification is subject to the control of the
         mplsTunnelNotificationEnable. When that object is set to
         false(2) then the notification must not be issued.

         Further, this notification is also subject to
         mplsTunnelNotificationMaxRate. That object indicates the
         maximum number of notifications issued per second. If events
         occur more rapidly, the implementation may simply fail to emit
         some notifications during that period, or may queue them until
         an appropriate time. The notification rate applies to the sum
         of all notifications in the MPLS-TE-STD-MIB and
         GMPLS-TE-STD-MIB modules applied across the whole of the
         reporting device.

         mplsTunnelOperStatus, mplsTunnelAdminStatus, mplsTunnelDown,
         mplsTunnelNotificationEnable, and mplsTunnelNotificationMaxRate
         objects are found in MPLS-TE-STD-MIB."


Nadeau and Farrel            Expires March 2007                [Page 39]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

       REFERENCE
         "1. Multiprotocol Label Switching (MPLS) Traffic Engineering
             (TE) Management Information Base (MIB), RFC 3812."
   ::= { gmplsTeNotifications 1 }

   gmplsTeGroups
     OBJECT IDENTIFIER ::= { gmplsTeConformance 1 }

   gmplsTeCompliances
     OBJECT IDENTIFIER ::= { gmplsTeConformance 2 }

   -- Compliance requirement for fully compliant implementations.

   gmplsTeModuleFullCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
        "Compliance statement for agents that provide full support for
         GMPLS-TE-STD-MIB. Such devices can then be monitored and also
         be configured using this MIB module.

         The mandatory group has to be implemented by all LSRs that
         originate, terminate or act as transit for TE-LSPs/tunnels.
         In addition, depending on the type of tunnels supported, other
         groups become mandatory as explained below."

     MODULE MPLS-TE-STD-MIB -- The MPLS-TE-STD-MIB, RFC3812

     MANDATORY-GROUPS {
        mplsTunnelGroup,
        mplsTunnelScalarGroup
     }

   MODULE -- this module

   MANDATORY-GROUPS {
     gmplsTunnelGroup,
     gmplsTunnelScalarGroup
   }

  GROUP gmplsTunnelSignaledGroup
     DESCRIPTION
       "This group is mandatory for devices which support signaled
        tunnel set up, in addition to gmplsTunnelGroup. The following
        constraints apply:
            mplsTunnelSignallingProto should be at least read-only
            returning a value of ldp(2), or rsvp(3)."

   GROUP gmplsTunnelOptionalGroup
     DESCRIPTION
       "Objects in this group are optional."

Nadeau and Farrel            Expires March 2007                [Page 40]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   GROUP gmplsTeNotificationGroup
   DESCRIPTION
        "This group is mandatory for those implementations which can
         implement the notifications contained in this group."

   ::= { gmplsTeCompliances 1 }

   -- Compliance requirement for read-only compliant implementations.

   gmplsTeModuleReadOnlyCompliance MODULE-COMPLIANCE
     STATUS current
     DESCRIPTION
       "Compliance requirement for implementations that only provide
        read-only support for GMPLS-TE-STD-MIB. Such devices can then be
        monitored but cannot be configured using this MIB module."

     MODULE -- this module

   -- The mandatory group has to be implemented by all LSRs that
   -- originate, terminate or act as transit for TE-LSPs/tunnels.
   -- In addition, depending on the type of tunnels supported, other
   -- groups become mandatory as explained below.

   MANDATORY-GROUPS {
     gmplsTunnelGroup,
     gmplsTunnelScalarGroup
   }

   GROUP gmplsTunnelSignaledGroup
     DESCRIPTION
       "This group is mandatory for devices which support signaled
        tunnel set up, in addition to gmplsTunnelGroup. The following
        constraints apply:
            mplsTunnelSignallingProto should be at least read-only
            returning a value of ldp(2), or rsvp(3)."

   GROUP gmplsTunnelOptionalGroup
     DESCRIPTION
       "Objects in this group are optional."

   GROUP gmplsTeNotificationGroup
   DESCRIPTION
        "This group is mandatory for those implementations which can
         implement the notifications contained in this group."

   OBJECT gmplsTunnelUnnumIf
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."


Nadeau and Farrel            Expires March 2007                [Page 41]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   OBJECT gmplsTunnelAttributes
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelLSPEncoding
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelSwitchingType
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelLinkProtection
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelGPid
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelSecondary
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelDirection
     MIN-ACCESS  read-only
     DESCRIPTION
       "Only forward (0) is required."

   OBJECT gmplsTunnelPathComp
    MIN-ACCESS  read-only
    DESCRIPTION
       "Only explicit (2) is required."

   OBJECT gmplsTunnelUpstreamNotifyRecipientType
   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
   MIN-ACCESS read-only
   DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
                is required."






Nadeau and Farrel            Expires March 2007                [Page 42]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   OBJECT gmplsTunnelUpstreamNotifyRecipient
   SYNTAX      InetAddress (SIZE(0|4|16))
   MIN-ACCESS  read-only
   DESCRIPTION "An implementation is only required to support
                unknown(0), ipv4(1) and ipv6(2) sizes."

   OBJECT gmplsTunnelSendResvNotifyRecipientType
   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
   MIN-ACCESS read-only
   DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
                is required."

   OBJECT gmplsTunnelSendResvNotifyRecipient
   SYNTAX      InetAddress (SIZE(0|4|16))
   MIN-ACCESS read-only
   DESCRIPTION "An implementation is only required to support
                unknown(0), ipv4(1) and ipv6(2) sizes."

   OBJECT gmplsTunnelDownstreamNotifyRecipientType
   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
   MIN-ACCESS read-only
   DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
                is required."

   OBJECT gmplsTunnelDownstreamNotifyRecipient
   SYNTAX      InetAddress (SIZE(0|4|16))
   MIN-ACCESS read-only
   DESCRIPTION "An implementation is only required to support
                unknown(0), ipv4(1) and ipv6(2) sizes."

   OBJECT gmplsTunnelSendPathNotifyRecipientType
   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
   MIN-ACCESS read-only
   DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
                is required."

   OBJECT gmplsTunnelSendPathNotifyRecipient
   SYNTAX      InetAddress (SIZE(0|4|16))
   MIN-ACCESS read-only
   DESCRIPTION "An implementation is only required to support
                unknown(0), ipv4(1) and ipv6(2) sizes."

   OBJECT gmplsTunnelAdminStatusFlags
      MIN-ACCESS read-only
      DESCRIPTION
       "Write access is not required."





Nadeau and Farrel            Expires March 2007                [Page 43]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   OBJECT gmplsTunnelExtraParamsPtr
     MIN-ACCESS read-only
     DESCRIPTION
       "Write access is not required."

   -- gmplsTunnelHopLabelStatuses has max access read-only

   OBJECT gmplsTunnelHopExplicitForwardLabel
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelHopExplicitForwardLabelPtr
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelHopExplicitReverseLabel
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   OBJECT gmplsTunnelHopExplicitReverseLabelPtr
     MIN-ACCESS  read-only
     DESCRIPTION
       "Write access is not required."

   -- gmplsTunnelARHopTable
   -- all objects have max access read-only

   -- gmplsTunnelCHopTable
   -- all objects have max access read-only

   -- gmplsTunnelReversePerfTable
   -- all objects have max access read-only

   -- gmplsTunnelErrorTable
   -- all objects have max access read-only

   OBJECT gmplsTunnelErrorReporterType
   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
   DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
                is required."

   OBJECT gmplsTunnelErrorReporter
   SYNTAX      InetAddress (SIZE(0|4|16))
   DESCRIPTION "An implementation is only required to support
                unknown(0), ipv4(1) and ipv6(2)."
   ::= { gmplsTeCompliances 2 }


Nadeau and Farrel            Expires March 2007                [Page 44]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   gmplsTunnelGroup OBJECT-GROUP
     OBJECTS {
       gmplsTunnelDirection,
       gmplsTunnelReversePerfPackets,
       gmplsTunnelReversePerfHCPackets,
       gmplsTunnelReversePerfErrors,
       gmplsTunnelReversePerfBytes,
       gmplsTunnelReversePerfHCBytes,
       gmplsTunnelErrorLastErrorType,
       gmplsTunnelErrorLastTime,
       gmplsTunnelErrorReporterType,
       gmplsTunnelErrorReporter,
       gmplsTunnelErrorCode,
       gmplsTunnelErrorSubcode,
       gmplsTunnelErrorTLVs,
       gmplsTunnelErrorHelpString,
       gmplsTunnelUnnumIf
     }
     STATUS  current
     DESCRIPTION
       "Necessary, but not sufficient, set of objects to implement
        tunnels. In addition, depending on the type of the tunnels
        supported (for example, manually configured or signaled,
        persistent or non-persistent, etc.), the
        gmplsTunnelSignaledGroup group is mandatory."
   ::= { gmplsTeGroups 1 }

   gmplsTunnelSignaledGroup OBJECT-GROUP
     OBJECTS {
       gmplsTunnelAttributes,
       gmplsTunnelLSPEncoding,
       gmplsTunnelSwitchingType,
       gmplsTunnelLinkProtection,
       gmplsTunnelGPid,
       gmplsTunnelSecondary,
       gmplsTunnelPathComp,
       gmplsTunnelUpstreamNotifyRecipientType,
       gmplsTunnelUpstreamNotifyRecipient,
       gmplsTunnelSendResvNotifyRecipientType,
       gmplsTunnelSendResvNotifyRecipient,
       gmplsTunnelDownstreamNotifyRecipientType,
       gmplsTunnelDownstreamNotifyRecipient,
       gmplsTunnelSendPathNotifyRecipientType,
       gmplsTunnelSendPathNotifyRecipient,
       gmplsTunnelAdminStatusFlags,
       gmplsTunnelHopLabelStatuses,
       gmplsTunnelHopExplicitForwardLabel,
       gmplsTunnelHopExplicitForwardLabelPtr,
       gmplsTunnelHopExplicitReverseLabel,


Nadeau and Farrel            Expires March 2007                [Page 45]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

       gmplsTunnelHopExplicitReverseLabelPtr
     }

     STATUS  current
     DESCRIPTION
       "Objects needed to implement signaled tunnels."
   ::= { gmplsTeGroups 2 }

   gmplsTunnelScalarGroup OBJECT-GROUP
     OBJECTS {
       gmplsTunnelsConfigured,
       gmplsTunnelsActive
     }
     STATUS  current
     DESCRIPTION
       "Scalar objects needed to implement MPLS tunnels."
   ::= { gmplsTeGroups 3 }

   gmplsTunnelOptionalGroup OBJECT-GROUP
     OBJECTS {
       gmplsTunnelExtraParamsPtr,
       gmplsTunnelARHopLabelStatuses,
       gmplsTunnelARHopExplicitForwardLabel,
       gmplsTunnelARHopExplicitForwardLabelPtr,
       gmplsTunnelARHopExplicitReverseLabel,
       gmplsTunnelARHopExplicitReverseLabelPtr,
       gmplsTunnelARHopProtection,
       gmplsTunnelCHopLabelStatuses,
       gmplsTunnelCHopExplicitForwardLabel,
       gmplsTunnelCHopExplicitForwardLabelPtr,
       gmplsTunnelCHopExplicitReverseLabel,
       gmplsTunnelCHopExplicitReverseLabelPtr
     }
     STATUS  current
     DESCRIPTION
       "The objects in this group are optional."
   ::= { gmplsTeGroups 4 }

   gmplsTeNotificationGroup NOTIFICATION-GROUP
     NOTIFICATIONS {
        gmplsTunnelDown
     }
     STATUS  current
     DESCRIPTION
       "Set of notifications implemented in this module. None is
        mandatory."
   ::= { gmplsTeGroups 5 }

   END


Nadeau and Farrel            Expires March 2007                [Page 46]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

9. Security Considerations

   It is clear that the MIB modules described in this document in
   association with the MPLS-TE-STD-MIB [RFC3812] are potentially useful
   for monitoring of MPLS and GMPLS tunnels. These MIB modules can also
   be used for configuration of certain objects, and anything that can
   be configured can be incorrectly configured, with potentially
   disastrous results.

   There are a number of management objects defined in these MIB modules
   with a MAX-ACCESS clause of read-write and/or read-create. Such
   objects may be considered sensitive or vulnerable in some network
   environments. The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations. These are the tables and objects and their
   sensitivity/vulnerability:

   o  the gmplsTunnelTable and gmplsTunnelHopTable collectively contain
      objects to provision GMPLS tunnels interfaces at their ingress
      LSRs. Unauthorized write access to objects in these tables, could
      result in disruption of traffic on the network. This is especially
      true if a tunnel has already been established.

   Some of the readable objects in these MIB modules (i.e., objects with
   a MAX-ACCESS other than not-accessible) may be considered sensitive
   or vulnerable in some network environments. It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP. These are the tables and objects and their
   sensitivity/vulnerability:

   o  the gmplsTunnelTable, gmplsTunnelHopTable, gmplsTunnelARHopTable,
      gmplsTunnelCHopTable, gmplsTunnelReversePerfTable, and the
      gmplsTunnelErrorTable collectively show the tunnel network
      topology and status. If an Administrator does not want to reveal
      this information, then these tables should be considered
      sensitive/vulnerable.

   SNMP versions prior to SNMPv3 did not include adequate security. Even
   if the network itself is secure (for example by using IPsec), even
   then, there is no control as to who on the secure network is allowed
   to access and GET/SET (read/change/create/delete) the objects in
   these MIB modules.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).



Nadeau and Farrel            Expires March 2007                [Page 47]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security. It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module, is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

10. Acknowledgments

   This document is a product of the CCAMP Working Group.

   This document extends [RFC3812]. The authors would like to express
   their gratitude to all those who worked on that earlier MIB document.
   Thanks also to Tony Zinicola and Jeremy Crossen for their valuable
   contributions during an early implementation, and to Lars Eggert,
   Baktha Muralidharan, Tom Petch, Dan Romascanu, Dave Thaler and
   Bert Wijnen for their review comments.

   Special thanks to Joan Cucchiara and Len Nieman for their help with
   compilation issues.

   Joan Cucchiara provided a helpful and very thorough MIB Doctor
   review.

11. IANA Considerations

   IANA is requested to root MIB objects in the MIB modules contained in
   this document according to the sections below.

11.1. IANA Considerations for GMPLS-TE-STD-MIB

   IANA is requested to root MIB objects in the GMPLS-TE-STD-MIB module
   contained in this document under the mplsStdMIB subtree.

   Upon approval of this document, the IANA will make the following
   assignments in the "NETWORK MANAGEMENT PARAMETERS" registry located
   at http://www.iana.org/assignments/smi-numbers in table:

   ...mib-2.transmission.mplsStdMIB (1.3.6.1.2.1.10.166)

   Decimal  Name                  References
   -------  -----                 ----------
   TBD+3    GMPLS-LSR-STD-MIB     [RFC-ccamp-gmpls-lsr-mib]

-- RFC Editor. Please replace YYY above with assigned OID and remove
-- this note

   In the future, GMPLS related standards track MIB modules should be
   rooted under the mplsStdMIB (sic) subtree. IANA has been requested to

Nadeau and Farrel            Expires March 2007                [Page 48]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   manage that namespace in the SMI Numbers registry [RFC3811]. New
   assignments can only be made via a Standards Action as specified in
   [RFC2434].

11.2. Dependence on IANA MIB Modules

   Three MIB objects in the GMPLS-LSR-STD-MIB module defined in this
   document (gmplsTunnelLSPEncoding, gmplsTunnelSwitchingType, and
   gmplsTunnelGPid) use textual conventions imported from the
   IANA-GMPLS-TC-MIB module. The purpose of defining these textual
   conventions in a separate MIB module is to allow additional values to
   be defined without having to issue a new version of this document.
   The Internet Assigned Numbers Authority (IANA) is responsible for the
   assignment of all Internet numbers; it will administer the values
   associated with these textual conventions.

   The rules for additions or changes to the IANA-GMPLS-TC-MIB are
   outlined in the DESCRIPTION clause associated with its
   MODULE-IDENTITY statement.

   The current versions of the IANA-GMPLS-TC-MIB can be accessed from
   the IANA home page at: "http://www.iana.org/".

11.2.1. IANA-GMPLS-TC-MIB Definition

   This is a temporary section intended to supply the base definition of
   an IANA MIB module. The normal procedure is that this MIB module is
   moved into the direct control of IANA, at which time this section
   should be deleted from this document.

   IANA is requested to assign an OID to the IANA-GMPLS-TC-MIB module
   specified in this document as { mib-2 ZZZ }.

-- RFC Editor.
-- Please replace ZZZ in the text below with assigned OID and remove
-- this note.















Nadeau and Farrel            Expires March 2007                [Page 49]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   IANA-GMPLS-TC-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY, mib-2              FROM SNMPv2-SMI  -- RFC2578
       TEXTUAL-CONVENTION                  FROM SNMPv2-TC;  -- RFC2579

   ianaGmpls MODULE-IDENTITY
       LAST-UPDATED
                  "200609060001Z" -- 06 September 2006 00:00:01 GMT
       ORGANIZATION
                  "IANA"
       CONTACT-INFO
                  "        Internet Assigned Numbers Authority
                   Postal: USC/Information Sciences Institute
                           4676 Admiralty Way, Marina del Rey, CA 90292
                   Tel:    +1 310 822 1511
                   E-Mail: iana@isi.edu"
       DESCRIPTION
         "Copyright (C) The Internet Society (2006). The initial version
          of this MIB module was published in RFC WWW. For full legal
          notices see the RFC itself.  Supplementary information
          may be available on:
          http://www.ietf.org/copyrights/ianamib.html"
-- RFC Editor. Please replace WWW above with the correct RFC number
-- Your actions may vary depending on how IANA chooses to handle
-- this IANA MIB.
-- Please remove this note.

          REVISION
               "200609060001Z" -- 06 September 2006 00:00:01 GMT
         DESCRIPTION
           "Initial version issued as part of RFC WWW."
       ::= { mib-2 ZZZ }

-- RFC Editor. Please replace WWW above with the correct RFC number
-- Your actions may vary depending on how IANA chooses to handle
-- this IANA MIB.
-- Please remove this note.

-- RFC Editor. Please replace ZZZ above with the OID assigned by IANA
-- Please remove this note.

   IANAGmplsLSPEncodingTypeTC ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
            "This type is used to represent and control
             the LSP encoding type of an LSP signaled by a GMPLS
             signaling protocol.



Nadeau and Farrel            Expires March 2007                [Page 50]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

             This textual convention is strongly tied to the LSP
             Encoding Types sub-registry of the GMPLS Signaling
             Parameters registry managed by IANA. Values should be
             assigned by IANA in step with the LSP Encoding Types
             sub-registry and using the same registry management rules.
             However, the actual values used in this textual convention
             are solely within the purview of IANA and do not
             necessarily match the values in the values in the LSP
             Encoding Types sub-registry.

             The definition of this textual convention with the
             addition of newly assigned values is published
             periodically by the IANA, in either the Assigned
             Numbers RFC, or some derivative of it specific to
             Internet Network Management number assignments. (The
             latest arrangements can be obtained by contacting the
             IANA.)

             Requests for new values should be made to IANA via
             email (iana@isi.edu)."
       REFERENCE
            "1. Generalized Multi-Protocol Label Switching (GMPLS)
                Signaling Functional Description, RFC 3471, section 
                3.1.1."
-- RFC Editor. Please update this reference to the RFC before
-- publication and remove this note
       SYNTAX  INTEGER {
                  tunnelLspNotGmpls (0), -- GMPLS is not in use
                  tunnelLspPacket (1),          -- Packet
                  tunnelLspEthernet (2),        -- Ethernet
                  tunnelLspAnsiEtsiPdh (3),     -- PDH
                  -- the value 4 is deprecated
                  tunnelLspSdhSonet (5),        -- SDH or SONET
                  -- the value 6 is deprecated
                  tunnelLspDigitalWrapper (7),  -- Digital Wrapper
                  tunnelLspLambda (8),          -- Lambda
                  tunnelLspFiber (9),           -- Fiber
                  -- the value 10 is deprecated
                  tunnelLspFiberChannel (11),   -- Fiber Channel
                  tunnelDigitalPath (12),       -- Digital Path
                  tunnelOpticalChannel (13)     -- Optical Channel
                }

   IANAGmplsSwitchingTypeTC ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
            "This type is used to represent and
             control the LSP switching type of an LSP signaled by a
             GMPLS signaling protocol.


Nadeau and Farrel            Expires March 2007                [Page 51]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

             This textual convention is strongly tied to the Switching
             Types sub-registry of the GMPLS Signaling Parameters
             registry managed by IANA. Values should be assigned by IANA
             in step with the Switching Types sub-registry and using the
             same registry management rules. However, the actual values
             used in this textual convention are solely within the
             purview of IANA and do not necessarily match the values in
             the values in the Switching Types sub-registry.

             The definition of this textual convention with the
             addition of newly assigned values is published
             periodically by the IANA, in either the Assigned
             Numbers RFC, or some derivative of it specific to
             Internet Network Management number assignments. (The
             latest arrangements can be obtained by contacting the
             IANA.)

             Requests for new values should be made to IANA via
             email (iana@isi.edu)."
       REFERENCE
            "1. Routing Extensions in Support of Generalized
                Multi-Protocol Label Switching, RFC 4202, section 2.4.
             2. Generalized Multi-Protocol Label Switching (GMPLS)
                Signaling Functional Description, RFC 3471, section 
                3.1.1."
       SYNTAX  INTEGER {
                  unknown (0),   -- none of the following, or not known
                  psc1 (1),      -- Packet-Switch-Capable 1
                  psc2 (2),      -- Packet-Switch-Capable 2
                  psc3 (3),      -- Packet-Switch-Capable 3
                  psc4 (4),      -- Packet-Switch-Capable 4
                  l2sc (51),     -- Layer-2-Switch-Capable
                  tdm (100),     -- Time-Division-Multiplex
                  lsc (150),     -- Lambda-Switch-Capable
                  fsc (200)      -- Fiber-Switch-Capable
                }

   IANAGmplsGeneralizedPidTC ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
            "This data type is used to represent and control the LSP
             Generalized Protocol Identifier (G-PID) of an LSP
             signaled by a GMPLS signaling protocol.

             This textual convention is strongly tied to the Generalized
             PIDs (G-PID) sub-registry of the GMPLS Signaling Parameters
             registry managed by IANA. Values should be assigned by IANA
             in step with the Generalized PIDs (G-PID) sub-registry and
             using the same registry management rules. However, the
             actual values used in this textual convention are solely

Nadeau and Farrel            Expires March 2007                [Page 52]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

             within the purview of IANA and do not necessarily match the
             values in the values in the Generalized PIDs (G-PID)
             sub-registry.

             The definition of this textual convention with the
             addition of newly assigned values is published
             periodically by the IANA, in either the Assigned
             Numbers RFC, or some derivative of it specific to
             Internet Network Management number assignments. (The
             latest arrangements can be obtained by contacting the
             IANA.)

             Requests for new values should be made to IANA via
             email (iana@isi.edu)."
        REFERENCE
            "1. Generalized Multi-Protocol Label Switching (GMPLS)
                Signaling Functional Description, RFC 3471, section 
                3.1.1.
            "
-- RFC Editor. Please update this reference to the RFC before
-- publication and remove this note
        SYNTAX  INTEGER {
                  unknown(0),      -- unknown or none of the following
                  -- the values 1, 2, 3 and 4 are reserved in RFC 3471
                  asynchE4(5),
                  asynchDS3T3(6),
                  asynchE3(7),
                  bitsynchE3(8),
                  bytesynchE3(9),
                  asynchDS2T2(10),
                  bitsynchDS2T2(11),
                  reservedByRFC3471first(12),
                  asynchE1(13),
                  bytesynchE1(14),
                  bytesynch31ByDS0(15),
                  asynchDS1T1(16),
                  bitsynchDS1T1(17),
                  bytesynchDS1T1(18),
                  vc1vc12(19),
                  reservedByRFC3471second(20),
                  reservedByRFC3471third(21),
                  ds1SFAsynch(22),
                  ds1ESFAsynch(23),
                  ds3M23Asynch(24),
                  ds3CBitParityAsynch(25),
                  vtLovc(26),
                  stsSpeHovc(27),
                  posNoScramble16BitCrc(28),
                  posNoScramble32BitCrc(29),
                  posScramble16BitCrc(30),

Nadeau and Farrel            Expires March 2007                [Page 53]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

                  posScramble32BitCrc(31),
                  atm(32),
                  ethernet(33),
                  sdhSonet(34),
                  digitalwrapper(36),
                  lambda(37),
                  ansiEtsiPdh (38),
                  lapsSdh (40),
                  fddi (41),
                  dqdb (42),
                  fiberChannel3 (43),
                  hdlc (44),
                  ethernetV2DixOnly (45),
                  ethernet802dot3Only (46),
                  g709ODUj (47),
                  g709OTUk (48),
                  g709CBRorCBRa (49),
                  g709CBRb (50),
                  g709BSOT (51),
                  g709BSNT (52),
                  gfpIPorPPP (53),
                  gfpEthernetMAC (54),
                  gfpEthernetPHY (55),
                  g709ESCON (56),
                  g709FICON (57),
                  g709FiberChannel (58)
                }

   IANAGmplsAdminStatusInformationTC ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
            "This data type determines the setting of the
             Admin Status flags in the Admin Status object or TLV, as
             described in RFC 3471. Setting this object to a non-zero
             value will result in the inclusion of the Admin Status
             object or TLV on signaling messages.

             This textual convention is strongly tied to the Admin
             Status Flags sub-registry of the GMPLS Signaling Parameters
             registry managed by IANA. Values should be assigned by IANA
             in step with the Admin Status Flags sub-registry and using
             the same registry management rules. However, the actual
             values used in this textual convention are solely within
             the purview of IANA and do not necessarily match the values
             in the values in the Admin Status Flags sub-registry.






Nadeau and Farrel            Expires March 2007                [Page 54]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

-- RFC Editor / IANA note
-- At the time of writing, the referenced Admin Status Flags
-- sub-registry has not been created.
-- It is not requested in RFC 3471 (the base reference for this protocol
-- element). But it is requested in two I-Ds that are ahead of this MIB
-- module in the IETF process
--    draft-ietf-ccamp-gmpls-recovery-e2e-signaling
--    draft-ietf-ccamp-gmpls-alarm-spec
-- Note, however, that at this stage no request is made to IANA for the
-- definition of values in the textual convention to match any of the
-- Admin Status bits except those defined in RFC 3471. IANA is free to
-- define additional values but these will not be used by this MIB
-- module (although future MIB modules will doubtless use them).
--
-- RFC Editor. Please update the previous paragraph to use the correct
-- name for the new sub-registry as defined by IANA, and delete this
-- note.

             The definition of this textual convention with the
             addition of newly assigned values is published
             periodically by the IANA, in either the Assigned
             Numbers RFC, or some derivative of it specific to
             Internet Network Management number assignments. (The
             latest arrangements can be obtained by contacting the
             IANA.)

             Requests for new values should be made to IANA via
             email (iana@isi.edu)."

      REFERENCE
            "1. Generalized Multi-Protocol Label Switching (GMPLS)
                Signaling Functional Description, RFC 3471, section 8."
      SYNTAX  BITS {
                     reflect (0),              -- Reflect bit (RFC 3471)
                     reserved1 (1),            -- reserved
                     reserved2 (2),            -- reserved
                     reserved3 (3),            -- reserved
                     reserved4 (4),            -- reserved
                     reserved5 (5),            -- reserved
                     reserved6 (6),            -- reserved
                     reserved7 (7),            -- reserved
                     reserved8 (8),            -- reserved
                     reserved9 (9),            -- reserved
                     reserved10 (10),          -- reserved
                     reserved11 (11),          -- reserved
                     reserved12 (12),          -- reserved
                     reserved13 (13),          -- reserved
                     reserved14 (14),          -- reserved
                     reserved15 (15),          -- reserved
                     reserved16 (16),          -- reserved

Nadeau and Farrel            Expires March 2007                [Page 55]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

                     reserved17 (17),          -- reserved
                     reserved18 (18),          -- reserved
                     reserved19 (19),          -- reserved
                     reserved20 (20),          -- reserved
                     reserved21 (21),          -- reserved
                     reserved22 (22),          -- reserved
                     reserved23 (23),          -- reserved
                     reserved24 (24),          -- reserved
                     reserved25 (25),          -- reserved
                     reserved26 (26),          -- reserved
                     reserved27 (27),          -- reserved
                     reserved28 (28),          -- reserved
                     testing (29),             -- Testing bit (RFC 3473)
                     administrativelyDown (30), -- Admin down (RFC 3473)
                     deleteInProgress (31)      -- Delete bit (RFC 3473)
                   }

   END



12. References

12.1. Normative References

   [RFC2119]    Bradner, S., "Key words for use in RFCs to Indicate
                Requirements Levels", BCP 14, RFC 2119, March 1997.

   [RFC2205]    Braden, R., Zhang, L., Berson, S., Herzog, S., and S.
                Jamin, "Resource ReSerVation Protocol (RSVP) -- Version
                1 Functional Specification", RFC 2205, September 1997.

   [RFC2434]    Narten, T. and H. Alvestrand, "Guidelines for Writing an
                IANA Considerations Section in RFCs", BCP 26, RFC 2434,
                October 1998.

   [RFC2578]    McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                J., Rose, M., and S. Waldbusser, "Structure of
                Management Information Version 2 (SMIv2)", STD 58, RFC
                2578, April 1999.

   [RFC2579]    McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                J., Rose, M., and S. Waldbusser, "Textual Conventions
                for SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580]    McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                J., Rose, M., and S. Waldbusser, "Conformance Statements
                for SMIv2", STD 58, RFC 2580, April 1999.



Nadeau and Farrel            Expires March 2007                [Page 56]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   [RFC3031]    Rosen, E., Viswanathan, A., and R. Callon,
                "Multiprotocol Label Switching Architecture", RFC 3031,
                January 2001.

   [RFC3209]    Awduche, D., Berger, L., Gan, D., Li, T., Srinivasan,
                V., and G. Swallow, "RSVP-TE: Extensions to RSVP for LSP
                Tunnels", RFC 3209, December 2001.

   [RFC3411]    Harrington, D., Presuhn, R., and B. Wijnen, "An
                Architecture for Describing Simple Network Management
                Protocol (SNMP) Management Frameworks", STD 62, RFC
                3411, December 2002.

   [RFC3471]    Berger, L., "Generalized Multi-Protocol Label Switching
                (GMPLS) Signaling Functional Description", RFC 3471,
                January 2003.

   [RFC3473]    Berger, L., "Generalized Multi-Protocol Label Switching
                (GMPLS) Signaling Resource ReserVation Protocol-Traffic
                Engineering (RSVP-TE) Extensions", RFC 3473, January
                2003.

   [RFC3477]    Kompella, K. and Y. Rekhter, "Signalling Unnumbered
                Links in Resource ReSerVation Protocol - Traffic
                Engineering (RSVP-TE)", RFC 3477, January 2003.

   [RFC3811]    Nadeau, T. and J. Cucchiara, "Definition of Textual
                Conventions and for Multiprotocol Label Switching (MPLS)
                Management", RFC 3811, June 2004.

   [RFC3812]    Srinivasan, C., Viswanathan, A., and T. Nadeau,
                "Multiprotocol Label Switching (MPLS) Traffic
                Engineering (TE) Management Information Base (MIB)",
                RFC 3812, June 2004.

   [RFC3813]    Srinivasan, C., Viswanathan, A., and T.  Nadeau,
                "Multiprotocol Label Switching (MPLS) Label Switching
                (LSR) Router Management Information Base (MIB)", RFC
                3813, June 2004.

   [RFC3945]    Mannie, E., Ed., "Generalized Multiprotocol Label
                Switching (GMPLS) Architecture", RFC 3945, October 2004.

   [RFC4001]    Daniele, M., Haberman, B., Routhier, S., and J.
                Schoenwaelder, "Textual Conventions for Internet Network
                Addresses", RFC 4001, February 2005.

   [RFC4202]    Kompella, K. and Y. Rekhter, "Routing Extensions in
                Support of Generalized Multi-Protocol Label Switching",
                RFC 4202, October 2005.

Nadeau and Farrel            Expires March 2007                [Page 57]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   [GMPLSLSRMIB] Nadeau, T. and A. Farrel, "Generalized Multiprotocol
                Label Switching (GMPLS) Label Switching Router (LSR)
                Management Information Base",
                draft-ietf-ccamp-gmpls-lsr-mib, work in progress.

12.2. Informative References

   [RFC2863]    McCloghrie, K. and F. Kastenholz, "The Interfaces Group
                MIB", RFC 2863, June 2000.

   [RFC3410]    Case, J., Mundy, R., Partain, D., and B. Stewart,
                "Introduction and Applicability Statements for
                Internet-Standard Management Framework", RFC 3410,
                December 2002.

   [RFC3472]    Ashwood-Smith, P. and L. Berger, "Generalized
                Multi-Protocol Label Switching (MPLS) Signaling
                - Constraint-based Routed Label Distribution Protocol
                (CR-LDP) Extensions", RFC 3472, January 2003.

13. Contact Information

   Thomas D. Nadeau
   Cisco Systems, Inc.
   1414 Massachusetts Ave.
   Boxborough, MA 01719
   Email: tnadeau@cisco.com

   Cheenu Srinivasan
   Bloomberg L.P.
   731 Lexington Ave.
   New York, NY 10022
   Phone: +1-212-617-3682
   Email: cheenu@bloomberg.net

   Adrian Farrel
   Old Dog Consulting
   Phone: +44-(0)-1978-860944
   Email: adrian@olddog.co.uk

   Tim Hall
   Data Connection Ltd.
   100 Church Street
   Enfield, Middlesex
   EN2 6BQ, UK
   Phone: +44 20 8366 1177
   Email: tim.hall@dataconnection.com




Nadeau and Farrel            Expires March 2007                [Page 58]


          draft-ietf-ccamp-gmpls-te-mib-16.txt            September 2006

   Ed Harrison
   Data Connection Ltd.
   100 Church Street
   Enfield, Middlesex
   EN2 6BQ, UK
   Phone: +44 20 8366 1177
   Email: ed.harrison@dataconnection.com

14. Intellectual Property Considerations

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights. Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard. Please address the information to the IETF at
   ietf-ipr@ietf.org.

15. Full Copyright Statement

   Copyright (C) The Internet Society (2006). This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.






Nadeau and Farrel            Expires March 2007                [Page 59]