Network Working Group A. Newton Internet-Draft VeriSign, Inc. Intended status: Standards Track March 5, 2007 Expires: September 6, 2007 A Common Schema for Internet Registry Information Service Transfer Protocols draft-ietf-crisp-iris-common-transport-05 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on September 6, 2007. Copyright Notice Copyright (C) The IETF Trust (2007). Newton Expires September 6, 2007 [Page 1]
Internet-Draft iris-common-transport March 2007 Abstract This document describes an XML Schema for use by Internet Registry Information Service (IRIS) application transfer protocols that share common characteristics. It describes common information about the transfer protocol, such as version, supported extensions, and supported security mechanisms. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Document Terminology . . . . . . . . . . . . . . . . . . . . . 4 3. Formal XML Syntax . . . . . . . . . . . . . . . . . . . . . . 5 4. Version Information . . . . . . . . . . . . . . . . . . . . . 8 5. Size Information . . . . . . . . . . . . . . . . . . . . . . . 10 6. Authentication Success Information . . . . . . . . . . . . . . 11 7. Authentication Failure Information . . . . . . . . . . . . . . 12 8. Other Information . . . . . . . . . . . . . . . . . . . . . . 13 9. Internationalization Considerations . . . . . . . . . . . . . 14 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15 10.1. XML Namespace URN Registration . . . . . . . . . . . . . 15 11. Security Considerations . . . . . . . . . . . . . . . . . . . 16 12. References . . . . . . . . . . . . . . . . . . . . . . . . . . 17 12.1. Normative References . . . . . . . . . . . . . . . . . . 17 12.2. Informative References . . . . . . . . . . . . . . . . . 17 Appendix A. Contributors . . . . . . . . . . . . . . . . . . . . 18 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 19 Intellectual Property and Copyright Statements . . . . . . . . . . 20 Newton Expires September 6, 2007 [Page 2]
Internet-Draft iris-common-transport March 2007 1. Introduction IRIS [8] has two transfer protocols, LWZ [9] and XPC [10], that share common negotiation mechanisms. Both transfer protocols have a need for the server to provide rich status information to clients during protocol negotiation. In many cases, this status information would be too complex to describe using simple bit fields and length- specifed octet sequences. This document defines an XML Schema for this rich status information and describes the usage of comforant XML for conveying this status information. This document defines five types of information used in the negotiation of protocol capabilities: version, size, authentication success, authentication failure, and other information. The version information is used to negotiate the versions and extensions to the transfer protocol, the application operations protocol, and data models used by the application operations. Size information is used to indicate request and response size capabilities and errors. Authentication failure and success information is used to indicate the outcome of an authentication action. Other types of information may also be conveyed that is generally a result of an error but cannot be corrected through defined protocol behavior. As an example, upon initiation of a connection, a server may send version information informing the client the data models supported by the server and the security mechanims supported by the server. The client may then respond appropriately. For example, the client may not recognize any of the data models supported by the server, and thefore close the connection. On the other hand, the client may recognize the data models and the security mechanisms and begin the procedure to initialize a security mechanism with the server before proceeding to query data according to a recognized data model. Both LWZ [9] and XPC [10] provide examples of the usage of the XML Schema defined in this document. Newton Expires September 6, 2007 [Page 3]
Internet-Draft iris-common-transport March 2007 2. Document Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119 [6]. Newton Expires September 6, 2007 [Page 4]
Internet-Draft iris-common-transport March 2007 3. Formal XML Syntax The following is the XML Schema used to define transfer protocol status information. See the following specifications: [2], [3], [4], [5]. <?xml version="1.0"?> <schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:iristrans="urn:ietf:params:xml:ns:iris-transport" targetNamespace="urn:ietf:params:xml:ns:iris-transport" elementFormDefault="qualified" > <annotation> <documentation> A schema for describing status information for use by multiple transfer protocols. </documentation> </annotation> <element name="versions"> <complexType> <sequence> <element name="transferProtocol" maxOccurs="unbounded"> <complexType> <sequence> <element name="application" minOccurs="0" maxOccurs="unbounded"> <complexType> <sequence> <element name="dataModel" minOccurs="0" maxOccurs="unbounded"> <complexType> <attribute name="protocolId" type="token" use="required" /> <attribute name="extensionIds" type="normalizedString" /> </complexType> </element> </sequence> <attribute name="protocolId" type="token" use="required" /> <attribute name="extensionIds" type="normalizedString" /> </complexType> </element> </sequence> <attribute name="protocolId" type="token" use="required" Newton Expires September 6, 2007 [Page 5]
Internet-Draft iris-common-transport March 2007 /> <attribute name="extensionIds" type="normalizedString" /> <attribute name="authenticationIds" type="normalizedString" /> <attribute name="responseSizeOctets" type="positiveInteger" /> <attribute name="requestSizeOctets" type="positiveInteger" /> </complexType> </element> </sequence> </complexType> </element> <element name="size"> <complexType> <sequence> <element name="request" minOccurs="0" type="iristrans:octetsType" /> <element name="response" minOccurs="0" type="iristrans:octetsType" /> </sequence> </complexType> </element> <complexType name="octetsType"> <choice> <element name="exceedsMaximum"> <complexType/> </element> <element name="octets" type="positiveInteger" /> </choice> </complexType> <element name="authenticationSuccess"> <complexType> <sequence> <element name="description" minOccurs="0" maxOccurs="unbounded"> <complexType> <simpleContent> <extension base="string"> <attribute name="language" type="language" use="required"/> </extension> </simpleContent> Newton Expires September 6, 2007 [Page 6]
Internet-Draft iris-common-transport March 2007 </complexType> </element> <element name="data" minOccurs="0" maxOccurs="1" type="base64Binary"/> </sequence> </complexType> </element> <element name="authenticationFailure"> <complexType> <sequence> <element name="description" minOccurs="0" maxOccurs="unbounded"> <complexType> <simpleContent> <extension base="string"> <attribute name="language" type="language" use="required"/> </extension> </simpleContent> </complexType> </element> </sequence> </complexType> </element> <element name="other"> <complexType> <sequence> <element name="description" minOccurs="0" maxOccurs="unbounded"> <complexType> <simpleContent> <extension base="string"> <attribute name="language" type="language" use="required"/> </extension> </simpleContent> </complexType> </element> </sequence> <attribute type="token" name="type" use="required"/> </complexType> </element> </schema> Newton Expires September 6, 2007 [Page 7]
Internet-Draft iris-common-transport March 2007 4. Version Information The <versions> element is used to describe version information about the transfer protocol, the application protocol, and data models used by the application protocol. The <versions> element has one or more <transferProtocol> child elements. <transferProtocol> elements have zero or more <application> child elements. And <application> elements have zero or more <dataModel> elements. Each of these element types has a 'protocolId' attribute identifying the protocol they represent and an optional 'extensionIds' attribute identifying the protocol extensions they support. During capabilities negotiation, it is expected that both sides of the negotiation recognize the 'protocolId' value of the <transferProtocol> element and at least one of the <application> and <dataModel> elements. If the negotiation produces a situation where this is not possible, an error SHOULD be given and communication ended. It is not expected that each side must recognize the 'extensionIds' values, and unrecognized 'extensionIds' values MUST be ignored. Additionally, the <transferProtocol> element has optional 'authenticationIds', 'responseSizeOctets', and 'requestSizeOctets' attributes. The 'authenticationIds' attribute identifies authentication mechanisms supported by the associated transfer protocol. The 'responseSizeOctets' attribute describes the maximum response size in octets the server will give. The 'requestSizeOctets' attribute describes the maximum request size in octets the server will accept. The protocol, extension, and authentication mechanism identifiers are of no specific type, and this document defines none. Specifications using this XML Schema MUST define the identifers for use with the <versions> element and its children. The meaning of octets for the transfer of data is counted in different ways for different transfer protocols. Some transfer protocols need only to specify the octets of the data being transfered while other transfer protocols need to account for additional octets used to transfer the data. Specifications using this XML Schema MUST describe how these octet counts are calculated. The following is example XML describing version information. Newton Expires September 6, 2007 [Page 8]
Internet-Draft iris-common-transport March 2007 <versions xmlns="urn:ietf:params:xml:ns:iris-transport"> <transferProtocol protocolId="iris.lwz" authenticationIds="PLAIN EXTERNAL"> <application protocolId="urn:ietf:params:xml:ns:iris1" extensionIds="http://example.com/SIMPLEBAG"> <dataModel protocolId="urn:ietf:params:xml:ns:dchk1"/> <dataModel protocolId="urn:ietf:params:xml:ns:dreg1"/> </application> </transferProtocol> </versions> Version Information Example Newton Expires September 6, 2007 [Page 9]
Internet-Draft iris-common-transport March 2007 5. Size Information The <size> element provides a means for a server to communicate to a client that a given request has exceeded a negotiated size (<request>) or that a response to a given request will exceed a negotiated size (<response>). A server may indicate one of two size conditions by specifying the following child elements: <exceedsMaximum> - this child element simply indicates that the size exceeded the negotiated size. <octets> - this child element indicates that the size exceeded the negotiated size and conveys the number of octets that is the maximum for a request if the parent element is a <request> element or the number of octets needed to provide the response if the parent element is a <response> element. The meaning of octets for the transfer of data is counted in different ways for different transfer protocols. Some transfer protocols need only to specify the octets of the data being transfered while other transfer protocols need to account for additional octets used to transfer the data. Specifications using this XML Schema MUST describe how these octet counts are calculated. The following is example XML describing size information. <size xmlns="urn:ietf:params:xml:ns:iris-transport"> <response> <octets>1211</octets> </response> </size> Size Information Example Newton Expires September 6, 2007 [Page 10]
Internet-Draft iris-common-transport March 2007 6. Authentication Success Information The <authenticationSuccess> element indicates that a client has successfully authenticated to a server. Along with this indication, it can provide text that may be presented to a user with regard to this successful authentication using child <description> elements. Each <description> element MUST have a 'language' attribute describing the language of the content of the <description> element. Clients are not expected to concatenate multiple descriptions, therefore servers MUST NOT provide multiple <description> elements with the same language descriptor. Finally, additional security data may be sent back with the authentication sucess message using the <data> element. The content of this element is of the base64Binary simple type. The following is example XML describing authentication success information. <authenticationSuccess xmlns="urn:ietf:params:xml:ns:iris-transport"> <description language="en"> user 'bob' authenticates via password </description> </authenticationSuccess> Authentication Success Example Newton Expires September 6, 2007 [Page 11]
Internet-Draft iris-common-transport March 2007 7. Authentication Failure Information The <authenticationFailure> element indicates that a client has failed to properly authenticate to a server. Along with this indication, it can provide text that may be presented to a user with regard to this authentication failure using child <description> elements. Each <description> element MUST have a 'language' attribute describing the language of the content of the <description> element. Clients are not expected to concatenate multiple descriptions, therefore servers MUST NOT provide multiple <description> elements with the same language descriptor. The following is example XML describing authentication failure information. <authenticationFailure xmlns="urn:ietf:params:xml:ns:iris-transport"> <description language="en"> please consult your admin if you have forgotten your password </description> </authenticationFailure> Authentication Failure Example Newton Expires September 6, 2007 [Page 12]
Internet-Draft iris-common-transport March 2007 8. Other Information The <other> element conveys status information that may require interpretation by a human to be meaningful. This element has a required 'type' attribute which contains an identifier regarding the nature of the information. This document does not define any identifiers for use in this attribute, but the intent is that these identifiers are well-known so that clients may take different classes of action based on the content of this attribute. Therefore, specifications making use of this XML Schema MUST define these identifiers. The <other> element may have zero or more <description> elements. Each <description> element MUST have a 'language' attribute describing the language of the content of the <description> element. Servers may use these child elements to convey textual information to clients regarding the class (or type) of status information being specified by the <other> element. Clients are not expected to concatenate multiple descriptions, therefore servers MUST NOT provide multiple <description> elements with the same language descriptor. The following is example XML describing other information. <other xmlns="urn:ietf:params:xml:ns:iris-transport" type="system"> <description language="en">unavailable, come back later</description> </other> Other Information Example Newton Expires September 6, 2007 [Page 13]
Internet-Draft iris-common-transport March 2007 9. Internationalization Considerations XML processors are obliged to recognize both UTF-8 and UTF-16 [1] encodings. XML provides for mechanisms to identify and use other character encodings. Application transfer protocols MUST define which additional character encodings, if any, are to be allowed in the use of the XML defined in this document. Newton Expires September 6, 2007 [Page 14]
Internet-Draft iris-common-transport March 2007 10. IANA Considerations 10.1. XML Namespace URN Registration This document makes use of the XML namespace and schema registry specified in XML_URN [7]. Accordingly, the following registration information is provided for the IANA: o XML Namespace URN/URI: * urn:ietf:params:xml:ns:iris-transport o Contact: * Andrew Newton <andy@hxr.us> o XML: * None. o XML Schema URN/URI: * urn:ietf:params:xml:schema:iris-transport o Contact: * Andrew Newton <andy@hxr.us> o XML: * The XML Schema specified in Section 3 Newton Expires September 6, 2007 [Page 15]
Internet-Draft iris-common-transport March 2007 11. Security Considerations Transfer protocols using XML conformant to the XML Schema in this document and offering security properties such as authentication and confidentiality SHOULD offer an initial message from the server to the client using the <version> element. This <version> element SHOULD contain all relevant authentication identifiers in its 'autheticationId' attribute. The purpose of providing this initial message is to help thwart downgrade attacks. Newton Expires September 6, 2007 [Page 16]
Internet-Draft iris-common-transport March 2007 12. References 12.1. Normative References [1] The Unicode Consortium, "The Unicode Standard, Version 3", ISBN 0-201-61633-5, 2000, <The Unicode Standard, Version 3>. [2] World Wide Web Consortium, "Extensible Markup Language (XML) 1.0", W3C XML, February 1998, <http://www.w3.org/TR/1998/REC-xml-19980210>. [3] World Wide Web Consortium, "Namespaces in XML", W3C XML Namespaces, January 1999, <http://www.w3.org/TR/1999/REC-xml-names-19990114>. [4] World Wide Web Consortium, "XML Schema Part 2: Datatypes", W3C XML Schema, October 2004, <http://www.w3.org/TR/xmlschema-2/>. [5] World Wide Web Consortium, "XML Schema Part 1: Structures", W3C XML Schema, October 2004, <http://www.w3.org/TR/xmlschema-1/>. [6] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", RFC 2119, BCP 14, March 1997. [7] Mealling, M., "The IETF XML Registry", RFC 3688, BCP 81, February 2004. 12.2. Informative References [8] Newton, A. and M. Sanz, "Internet Registry Information Service", RFC 3981, January 2004. [9] Newton, A., "A Lightweight UDP Transfer Protocol for the Internet Registry Information Service", draft-ietf-crips-iris-lwz-02 (work in progress), April 2005. [10] Newton, A., "XML Pipelining with Chunks for the Internet Registry Information Service", draft-ietf-crips-iris-xpc-00 (work in progress), April 2005. Newton Expires September 6, 2007 [Page 17]
Internet-Draft iris-common-transport March 2007 Appendix A. Contributors Substantive contributions to this document have been provided by the members of the IETF's CRISP Working Group, especially Robert Martin- Legene, Milena Caires, and David Blacka. Newton Expires September 6, 2007 [Page 18]
Internet-Draft iris-common-transport March 2007 Author's Address Andrew L. Newton VeriSign, Inc. 21345 Ridgetop Circle Sterling, VA 20166 USA Phone: +1 703 948 3382 Email: andy@hxr.us URI: http://www.verisignlabs.com/ Newton Expires September 6, 2007 [Page 19]
Internet-Draft iris-common-transport March 2007 Full Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Newton Expires September 6, 2007 [Page 20]
