Distributed Mobility Management [dmm] C. Perkins
Internet-Draft Futurewei
Intended status: Standards Track V. Devarapalli
Expires: May 17, 2018 Vasona Networks
November 13, 2017
MN Identifier Types for RFC 4283 Mobile Node Identifier Option
draft-ietf-dmm-4283mnids-06.txt
Abstract
Additional Identifier Type Numbers are defined for use with the
Mobile Node Identifier Option for MIPv6 (RFC 4283).
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 17, 2018.
Copyright Notice
Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Perkins & Devarapalli Expires May 17, 2018 [Page 1]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. New Mobile Node Identifier Types . . . . . . . . . . . . . . 3
4. Descriptions of MNID types . . . . . . . . . . . . . . . . . 5
4.1. Description of the IPv6 address type . . . . . . . . . . 5
4.2. Description of the IMSI MNID type . . . . . . . . . . . . 5
4.3. Description of the EUI-48 address type . . . . . . . . . 5
4.4. Description of the EUI-64 address type . . . . . . . . . 5
4.5. Description of the DUID type . . . . . . . . . . . . . . 6
4.6. Description of the RFID types . . . . . . . . . . . . . . 6
4.6.1. Description of the RFID-SGTIN-64 type . . . . . . . . 7
4.6.2. Description of the RFID-SGTIN-96 type . . . . . . . . 7
4.6.3. Description of the RFID-SSCC-64 type . . . . . . . . 7
4.6.4. Description of the RFID-SSCC-96 type . . . . . . . . 7
4.6.5. Description of the RFID-SGLN-64 type . . . . . . . . 7
4.6.6. Description of the RFID-SGLN-96 type . . . . . . . . 8
4.6.7. Description of the RFID-GRAI-64 type . . . . . . . . 8
4.6.8. Description of the RFID-GRAI-96 type . . . . . . . . 8
4.6.9. Description of the RFID-GIAI-64 type . . . . . . . . 8
4.6.10. Description of the RFID-GIAI-96 type . . . . . . . . 8
4.6.11. Description of the RFID-DoD-64 type . . . . . . . . . 8
4.6.12. Description of the RFID-DoD-96 type . . . . . . . . . 8
4.6.13. Description of the RFID URI types . . . . . . . . . . 8
5. Security Considerations . . . . . . . . . . . . . . . . . . . 9
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 11
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 11
8.1. Normative References . . . . . . . . . . . . . . . . . . 11
8.2. Informative References . . . . . . . . . . . . . . . . . 12
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 13
1. Introduction
The Mobile Node Identifier Option for MIPv6 [RFC4283] has proved to
be a popular design tool for providing identifiers for mobile nodes
during authentication procedures with AAA protocols such as Diameter
[RFC3588]. To date, only a single type of identifier has been
specified, namely the MN NAI. Other types of identifiers are in
common use, and even referenced in RFC 4283. In this document, we
propose adding some basic types that are defined in various
telecommunications standards, including types for IMSI
[ThreeGPP-IDS], P-TMSI [ThreeGPP-IDS], IMEI [ThreeGPP-IDS], and GUTI
[ThreeGPP-IDS]. In addition, we specify the IPv6 address itself and
IEEE MAC-layer addresses as mobile node identifiers. Defining
identifiers that are tied to the physical elements of the device
(RFID, MAC address etc.) help in deployment of Mobile IP because in
Perkins & Devarapalli Expires May 17, 2018 [Page 2]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
many cases such identifiers are the most natural means for uniquely
identifying the device, and will avoid additional look-up steps that
might be needed if other identifiers were used.
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
[RFC2119].
3. New Mobile Node Identifier Types
The following types of identifiers are commonly used to identify
mobile nodes. For each type, references are provided with full
details on the format of the type of identifer.
The Tag Data standard promoted by Electronic Product Code(TM)
(abbreviated EPC) [EPC-Tag-Data] supports several encoding systems or
schemes, which are commonly used in RFID (radio-frequency
identification) applications, including
o RFID-GID (Global Identifier),
o RFID-SGTIN (Serialized Global Trade Item Number),
o RFID-SSCC (Serial Shipping Container),
o RFID-SGLN (Global Location Number),
o RFID-GRAI (Global Returnable Asset Identifier),
o RFID-DOD (Department of Defense ID), and
o RFID-GIAI (Global Individual Asset Identifier).
For each RFID scheme except GID, there are three representations:
o a 64-bit binary representation (for example, SGLN-64) (except for
GID)
o a 96-bit binary representation (SGLN-96)
o a representation as a URI
The URI representation for the RFID is actually a URN. The EPC
document has the following language:
All categories of URIs are represented as Uniform Reference Names
(URNs) as defined by [RFC2141], where the URN Namespace is epc.
The following list includes the above RFID types as well as various
other common identifiers.
Mobile Node Identifier Description
Perkins & Devarapalli Expires May 17, 2018 [Page 3]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
+----------------+--------------------------------+-----------------+
| Identifier | Description | Reference |
| Type | | |
+----------------+--------------------------------+-----------------+
| IPv6 Address | | [RFC4291] |
| IMSI | International Mobile | [ThreeGPP-IDS] |
| | Subscriber Identity | |
| P-TMSI | Packet-Temporary Mobile | [ThreeGPP-IDS] |
| | Subscriber Identity | |
| GUTI | Globally Unique Temporary ID | [ThreeGPP-IDS] |
| EUI-48 address | 48-bit Extended Unique | [IEEE802] |
| | Identifier | |
| EUI-64 address | 64-bit Extended Unique | [IEEE802] |
| | Identifier-64 bit | |
| DUID | DHCPv6 Unique Identifier | [RFC3315] |
| RFID-SGTIN-64 | 64-bit Serialized Global Trade | [EPC-Tag-Data] |
| | Item Number | |
| RFID-SSCC-64 | 64-bit Serial Shipping | [EPC-Tag-Data] |
| | Container | |
| RFID-SGLN-64 | 64-bit Serialized Global | [EPC-Tag-Data] |
| | Location Number | |
| RFID-GRAI-64 | 64-bit Global Returnable Asset | [EPC-Tag-Data] |
| | Identifier | |
| RFID-DOD-64 | 64-bit Department of Defense | [RFID-DoD-spec] |
| | ID | |
| RFID-GIAI-64 | 64-bit Global Individual Asset | [EPC-Tag-Data] |
| | Identifier | |
| RFID-GID-96 | 96-bit Global Identifier | [EPC-Tag-Data] |
| RFID-SGTIN-96 | 96-bit Serialized Global Trade | [EPC-Tag-Data] |
| | Item Number | |
| RFID-SSCC-96 | 96-bit Serial Shipping | [EPC-Tag-Data] |
| | Container | |
| RFID-SGLN-96 | 96-bit Serialized Global | [EPC-Tag-Data] |
| | Location Number | |
| RFID-GRAI-96 | 96-bit Global Returnable Asset | [EPC-Tag-Data] |
| | Identifier | |
| RFID-DOD-96 | 96-bit Department of Defense | [RFID-DoD-spec] |
| | ID | |
| RFID-GIAI-96 | 96-bit Global Individual Asset | [EPC-Tag-Data] |
| | Identifier | |
| RFID-GID-URI | Global Identifier represented | [EPC-Tag-Data] |
| | as URI | |
| RFID-SGTIN-URI | Serialized Global Trade Item | [EPC-Tag-Data] |
| | Number represented as URI | |
| RFID-SSCC-URI | Serial Shipping Container | [EPC-Tag-Data] |
| | represented as URI | |
| RFID-SGLN-URI | Global Location Number | [EPC-Tag-Data] |
| | represented as URI | |
Perkins & Devarapalli Expires May 17, 2018 [Page 4]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
| RFID-GRAI-URI | Global Returnable Asset | [EPC-Tag-Data] |
| | Identifier represented as URI | |
| RFID-DOD-URI | Department of Defense ID | [RFID-DoD-spec] |
| | represented as URI | |
| RFID-GIAI-URI | Global Individual Asset | [EPC-Tag-Data] |
| | Identifier represented as URI | |
+----------------+--------------------------------+-----------------+
Table 1
4. Descriptions of MNID types
In this section descriptions for the various MNID types are provided.
4.1. Description of the IPv6 address type
The IPv6 address [RFC4291] is encoded as a 16 octet string containing
a full IPv6 address which has been assigned to the mobile node. The
IPv6 address MUST be a unicast routable IPv6 address. Multicast
addresses, link-local addresses, and the unspecified IPv6 address
MUST NOT be used. IPv6 Unique Local Addresses (ULAs) MAY be used, as
long as any security operations making use of the ULA also take into
account the domain in which the ULA is guaranteed to be unique.
4.2. Description of the IMSI MNID type
The International Mobile Subscriber Identity (IMSI) [ThreeGPP-IDS] is
at most 15 decimal digits (i.e., digits from 0 through 9). The IMSI
MUST be encoded as a string of octets in network order (i.e., high-
to-low for all digits), where each digit occupies 4 bits. If needed
for full octet size, the last digit MUST be padded with 0xf. For
example an example IMSI 123456123456789 would be encoded as follows:
0x12, 0x34, 0x56, 0x12, 0x34, 0x56, 0x78, 0x9f
4.3. Description of the EUI-48 address type
The IEEE EUI-48 address [IEEE802-eui48] is encoded as 6 octets
containing the IEEE EUI-48 address.
4.4. Description of the EUI-64 address type
The IEEE EUI-64 address [IEEE802-eui64] is encoded as 8 octets
containing the full IEEE EUI-64 address.
Perkins & Devarapalli Expires May 17, 2018 [Page 5]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
4.5. Description of the DUID type
The DUID is the DHCPv6 Unique Identifier (DUID) [RFC3315]. There are
various types of DUID, which are distinguished by an initial two-
octet type field. Clients and servers MUST treat DUIDs as opaque
values and MUST only compare DUIDs for equality.
4.6. Description of the RFID types
The General Identifier (GID) that is used with RFID is composed of
three fields - the General Manager Number, Object Class and Serial
Number. The General Manager Number identifies an organizational
entity that is responsible for maintaining the numbers in subsequent
fields. GID encodings include a fourth field, the header, to
guarantee uniqueness in the namespace defined by EPC.
Some of the RFID types depend on the Global Trade Item Number (GTIN)
code defined in the General EAN.UCC Specifications [EANUCCGS]. A
GTIN identifies a particular class of object, such as a particular
kind of product or SKU.
The EPC encoding scheme for SGTIN permits the direct embedding of
EAN.UCC System standard GTIN and Serial Number codes on EPC tags. In
all cases, the check digit is not encoded. Two encoding schemes are
specified, SGTIN-64 (64 bits) and SGTIN-96 (96 bits).
The Serial Shipping Container Code (SSCC) is defined by the EAN.UCC
Specifications. Unlike the GTIN, the SSCC is already intended for
assignment to individual objects and therefore does not require
additional fields to serve as an EPC pure identity. Two encoding
schemes are specified, SSCC-64 (64 bits) and SSCC-96 (96 bits).
The Global Location Number (GLN) is defined by the EAN.UCC
Specifications. A GLN can represent either a discrete, unique
physical location such as a warehouse slot, or an aggregate physical
location such as an entire warehouse. In addition, a GLN can
represent a logical entity that performs a business function such as
placing an order. The Serialized Global Location Number (SGLN)
includes the Company Prefix, Location Reference, and Serial Number.
The Global Returnable Asset Identifier (GRAI) is defined by the
General EAN.UCC Specifications. Unlike the GTIN, the GRAI is already
intended for assignment to individual objects and therefore does not
require any additional fields to serve as an EPC pure identity. The
GRAI includes the Company Prefix, Asset Type, and Serial Number.
The Global Individual Asset Identifier (GIAI) is defined by the
General EAN.UCC Specifications. Unlike the GTIN, the GIAI is already
Perkins & Devarapalli Expires May 17, 2018 [Page 6]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
intended for assignment to individual objects and therefore does not
require any additional fields to serve as an EPC pure identity. The
GRAI includes the Company Prefix, and Individual Asset Reference.
The DoD Construct identifier is defined by the United States
Department of Defense (DoD). This tag data construct may be used to
encode tags for shipping goods to the DoD by a supplier who has
already been assigned a CAGE (Commercial and Government Entity) code.
4.6.1. Description of the RFID-SGTIN-64 type
The RFID-SGTIN-64 is encoded as specified in [EPC-Tag-Data]. The
SGTIN-64 includes five fields: Header, Filter Value (additional data
that is used for fast filtering and pre-selection), Company Prefix
Index, Item Reference, and Serial Number. Only a limited number of
Company Prefixes can be represented in the 64-bit tag.
4.6.2. Description of the RFID-SGTIN-96 type
The RFID-SGTIN-96 is encoded as specified in [EPC-Tag-Data]. The
SGTIN-96 includes six fields: Header, Filter Value, Partition (an
indication of where the subsequent Company Prefix and Item Reference
numbers are divided), Company Prefix Index, Item Reference, and
Serial Number.
4.6.3. Description of the RFID-SSCC-64 type
The RFID-SSCC-64 is encoded as specified in [EPC-Tag-Data]. The
SSCC-64 includes four fields: Header, Filter Value, Company Prefix
Index, and Serial Reference. Only a limited number of Company
Prefixes can be represented in the 64-bit tag.
4.6.4. Description of the RFID-SSCC-96 type
The RFID-SSCC-96 is encoded as specified in [EPC-Tag-Data]. The
SSCC-96 includes six fields: Header, Filter Value, Partition, Company
Prefix, and Serial Reference, as well as 24 bits that remain
Unallocated and must be zero.
4.6.5. Description of the RFID-SGLN-64 type
The RFID-SGLN-64 type is encoded as specified in [EPC-Tag-Data]. The
SGLN-64 includes five fields: Header, Filter Value, Company Prefix
Index, Location Reference, and Serial Number.
Perkins & Devarapalli Expires May 17, 2018 [Page 7]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
4.6.6. Description of the RFID-SGLN-96 type
The RFID-SGLN-96 type is encoded as specified in [EPC-Tag-Data]. The
SGLN-96 includes six fields: Header, Filter Value, Partition, Company
Prefix, Location Reference, and Serial Number.
4.6.7. Description of the RFID-GRAI-64 type
The RFID-GRAI-64 type is encoded as specified in [EPC-Tag-Data]. The
GRAI-64 includes five fields: Header, Filter Value, Company Prefix
Index, Asset Type, and Serial Number.
4.6.8. Description of the RFID-GRAI-96 type
The RFID-GRAI-96 type is encoded as specified in [EPC-Tag-Data]. The
GRAI-96 includes six fields: Header, Filter Value, Partition, Company
Prefix, Asset Type, and Serial Number.
4.6.9. Description of the RFID-GIAI-64 type
The RFID-GIAI-64 type is encoded as specified in [EPC-Tag-Data]. The
GIAI-64 includes four fields: Header, Filter Value, Company Prefix
Index, and Individual Asset Reference.
4.6.10. Description of the RFID-GIAI-96 type
The RFID-GIAI-96 type is encoded as specified in [EPC-Tag-Data]. The
GIAI-96 includes five fields: Header, Filter Value, Partition,
Company Prefix, and Individual Asset Reference.
4.6.11. Description of the RFID-DoD-64 type
The RFID-DoD-64 type is encoded as specified in [RFID-DoD-spec]. The
DoD-64 type includes four fields: Header, Filter Value, Government
Managed Identifier, and Serial Number.
4.6.12. Description of the RFID-DoD-96 type
The RFID-DoD-96 type is encoded as specified in [RFID-DoD-spec]. The
DoD-96 type includes four fields: Header, Filter Value, Government
Managed Identifier, and Serial Number.
4.6.13. Description of the RFID URI types
In some cases, it is desirable to encode in URI form a specific
encoding of an RFID tag. For example, an application may prefer a
URI representation for report preparation. Applications that wish to
Perkins & Devarapalli Expires May 17, 2018 [Page 8]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
manipulate any additional data fields on tags may need some
representation other than the pure identity forms.
For this purpose, the fields as represented the previous sections are
associated with specified fields in the various URI types. For
instance, the URI may have fields such as CompanyPrefix,
ItemReference, or SerialNumber. For details and encoding specifics,
consult [EPC-Tag-Data].
5. Security Considerations
This document does not introduce any security mechanisms, and does
not have any impact on existing security mechanisms.
Mobile Node Identifiers such as those described in this document are
considered to be private information. If used in the MNID extension
as defined in [RFC4283], the packet including the MNID extension MUST
be encrypted so that no personal information or trackable identifiers
is inadvertently disclosed to passive observers. Operators can
potentially apply IPsec Encapsulating Security Payload (ESP)
[RFC4303], in transport mode, with confidentiality and integrity
protection for protecting the identity and location information in
Mobile IPv6 signaling messages.
Some MNIDs contain sensitive identifiers which, as used in protocols
specified by other SDOs, are only used for signaling during initial
network entry. In such protocols, subsequent exchanges then rely on
a temporary identifier allocated during the initial network entry.
Managing the association between long-lived and temporary identifiers
is outside the scope of this document.
6. IANA Considerations
The new mobile node identifier types defined in the document should
be assigned values from the "Mobile Node Identifier Option Subtypes"
registry. The following values should be assigned.
Perkins & Devarapalli Expires May 17, 2018 [Page 9]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
New Mobile Node Identifier Types
+-----------------+------------------------+
| Identifier Type | Identifier Type Number |
+-----------------+------------------------+
| IPv6 Address | 2 |
| IMSI | 3 |
| P-TMSI | 4 |
| EUI-48 address | 5 |
| EUI-64 address | 6 |
| GUTI | 7 |
| DUID-LLT | 8 |
| DUID-EN | 9 |
| DUID-LL | 10 |
| DUID-UUID | 11 |
| | 12-15 reserved |
| | 16 reserved |
| RFID-SGTIN-64 | 17 |
| RFID-SSCC-64 | 18 |
| RFID-SGLN-64 | 19 |
| RFID-GRAI-64 | 20 |
| RFID-DOD-64 | 21 |
| RFID-GIAI-64 | 22 |
| | 23 reserved |
| RFID-GID-96 | 24 |
| RFID-SGTIN-96 | 25 |
| RFID-SSCC-96 | 26 |
| RFID-SGLN-96 | 27 |
| RFID-GRAI-96 | 28 |
| RFID-DOD-96 | 29 |
| RFID-GIAI-96 | 30 |
| | 31 reserved |
| RFID-GID-URI | 32 |
| RFID-SGTIN-URI | 33 |
| RFID-SSCC-URI | 34 |
| RFID-SGLN-URI | 35 |
| RFID-GRAI-URI | 36 |
| RFID-DOD-URI | 37 |
| RFID-GIAI-URI | 38 |
| | 39-255 unassigned |
+-----------------+------------------------+
Table 2
See Section 4 for additional information about the identifier types.
Future new assignments are to be made only after Expert Review
[RFC8126]. The expert must ascertain that the identifier type allows
unique identification of the mobile device; since all MNIDs require
Perkins & Devarapalli Expires May 17, 2018 [Page 10]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
encryption there is no additional privacy exposure attendent to the
use of new types.
7. Acknowledgements
The authors wish to acknowledge Hakima Chaouchi, Tatuya Jinmei, Jouni
Korhonen, Sri Gundavelli, Suresh Krishnan, Dapeng Liu, Dale Worley,
Joseph Salowey, Linda Dunbar, and Mirja Kuehlewind for their helpful
comments.
8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3315] Droms, R., Ed., Bound, J., Volz, B., Lemon, T., Perkins,
C., and M. Carney, "Dynamic Host Configuration Protocol
for IPv6 (DHCPv6)", RFC 3315, DOI 10.17487/RFC3315, July
2003, <https://www.rfc-editor.org/info/rfc3315>.
[RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally
Unique IDentifier (UUID) URN Namespace", RFC 4122,
DOI 10.17487/RFC4122, July 2005,
<https://www.rfc-editor.org/info/rfc4122>.
[RFC4283] Patel, A., Leung, K., Khalil, M., Akhtar, H., and K.
Chowdhury, "Mobile Node Identifier Option for Mobile IPv6
(MIPv6)", RFC 4283, DOI 10.17487/RFC4283, November 2005,
<https://www.rfc-editor.org/info/rfc4283>.
[RFC4291] Hinden, R. and S. Deering, "IP Version 6 Addressing
Architecture", RFC 4291, DOI 10.17487/RFC4291, February
2006, <https://www.rfc-editor.org/info/rfc4291>.
[RFC4303] Kent, S., "IP Encapsulating Security Payload (ESP)",
RFC 4303, DOI 10.17487/RFC4303, December 2005,
<https://www.rfc-editor.org/info/rfc4303>.
[RFC6355] Narten, T. and J. Johnson, "Definition of the UUID-Based
DHCPv6 Unique Identifier (DUID-UUID)", RFC 6355,
DOI 10.17487/RFC6355, August 2011,
<https://www.rfc-editor.org/info/rfc6355>.
Perkins & Devarapalli Expires May 17, 2018 [Page 11]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
[RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for
Writing an IANA Considerations Section in RFCs", BCP 26,
RFC 8126, DOI 10.17487/RFC8126, June 2017,
<https://www.rfc-editor.org/info/rfc8126>.
8.2. Informative References
[EANUCCGS]
EAN International and the Uniform Code Council, "General
EAN.UCC Specifications Version 5.0", Jan 2004.
[EPC-Tag-Data]
EPCglobal Inc., "EPC(TM) Generation 1 Tag Data Standards
Version 1.1 Rev.1.27
http://www.gs1.org/gsmp/kc/epcglobal/tds/
tds_1_1_rev_1_27-standard-20050510.pdf", January 2005.
[IEEE802] IEEE, "IEEE Std 802: IEEE Standards for Local and
Metropolitan Networks: Overview and Architecture", 2001.
[IEEE802-eui48]
IEEE, "Guidelines for 48-Bit Global Identifier (EUI-48)
https://standards.ieee.org/develop/regauth/tut/eui48.pdf",
2001.
[IEEE802-eui64]
IEEE, "Guidelines for 64-Bit Global Identifier (EUI-64)
https://standards.ieee.org/develop/regauth/tut/eui.pdf64",
2001.
[RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J.
Arkko, "Diameter Base Protocol", RFC 3588,
DOI 10.17487/RFC3588, September 2003,
<https://www.rfc-editor.org/info/rfc3588>.
[RFID-DoD-spec]
Department of Defense, "United States Department of
Defense Suppliers Passive RFID Information Guide (Version
15.0)", January 2010.
[ThreeGPP-IDS]
3rd Generation Partnership Project, "3GPP Technical
Specification 23.003 V8.4.0: Technical Specification Group
Core Network and Terminals; Numbering, addressing and
identification (Release 8)", March 2009.
Perkins & Devarapalli Expires May 17, 2018 [Page 12]
Internet-Draft MN Identifier Types for RFC 4283 November 2017
Authors' Addresses
Charles E. Perkins
Futurewei Inc.
2330 Central Expressway
Santa Clara, CA 95050
USA
Phone: +1-408-330-4586
Email: charliep@computer.org
Vijay Devarapalli
Vasona Networks
2900 Lakeside Drive, Suite 180
Santa Clara, CA 95054
USA
Email: dvijay@gmail.com
Perkins & Devarapalli Expires May 17, 2018 [Page 13]
