HTTPAuth Working Group                                        J. Reschke
Internet-Draft                                                greenbytes
Obsoletes: 2617 (if approved)                          February 28, 2015
Intended status: Standards Track
Expires: September 1, 2015


                 The 'Basic' HTTP Authentication Scheme
                draft-ietf-httpauth-basicauth-update-07

Abstract

   This document defines the "Basic" Hypertext Transfer Protocol (HTTP)
   Authentication Scheme, which transmits credentials as user-id/
   password pairs, encoded using Base64.

Editorial Note (To be removed by RFC Editor before publication)

   Discussion of this draft takes place on the HTTPAuth working group
   mailing list (http-auth@ietf.org), which is archived at <http://
   www.ietf.org/mail-archive/web/http-auth/current/maillist.html>.

   XML versions, latest edits and the issues list for this document are
   available from <http://greenbytes.de/tech/
   webdav/#draft-ietf-httpauth-basicauth-update>.

   The changes in this draft are summarized in Appendix C.8.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 1, 2015.

Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the



Reschke                 Expires September 1, 2015               [Page 1]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.




























Reschke                 Expires September 1, 2015               [Page 2]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  4
     1.1.  Terminology and Notation . . . . . . . . . . . . . . . . .  4
   2.  The 'Basic' Authentication Scheme  . . . . . . . . . . . . . .  4
     2.1.  The 'charset' auth-param . . . . . . . . . . . . . . . . .  6
     2.2.  Re-using Credentials . . . . . . . . . . . . . . . . . . .  8
   3.  Internationalization Considerations  . . . . . . . . . . . . .  8
   4.  Security Considerations  . . . . . . . . . . . . . . . . . . .  9
   5.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 10
   6.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 10
   7.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 11
     7.1.  Normative References . . . . . . . . . . . . . . . . . . . 11
     7.2.  Informative References . . . . . . . . . . . . . . . . . . 12
   Appendix A.  Changes from RFC 2617 . . . . . . . . . . . . . . . . 13
   Appendix B.  Deployment Considerations for the 'charset'
                Parameter . . . . . . . . . . . . . . . . . . . . . . 13
     B.1.  User Agents  . . . . . . . . . . . . . . . . . . . . . . . 13
     B.2.  Servers  . . . . . . . . . . . . . . . . . . . . . . . . . 13
     B.3.  Why not simply switch the default encoding to UTF-8? . . . 14
   Appendix C.  Change Log (to be removed by RFC Editor before
                publication)  . . . . . . . . . . . . . . . . . . . . 14
     C.1.  Since RFC 2617 . . . . . . . . . . . . . . . . . . . . . . 14
     C.2.  Since draft-ietf-httpauth-basicauth-update-00  . . . . . . 14
     C.3.  Since draft-ietf-httpauth-basicauth-update-01  . . . . . . 15
     C.4.  Since draft-ietf-httpauth-basicauth-update-02  . . . . . . 15
     C.5.  Since draft-ietf-httpauth-basicauth-update-03  . . . . . . 15
     C.6.  Since draft-ietf-httpauth-basicauth-update-04  . . . . . . 15
     C.7.  Since draft-ietf-httpauth-basicauth-update-05  . . . . . . 15
     C.8.  Since draft-ietf-httpauth-basicauth-update-06  . . . . . . 15





















Reschke                 Expires September 1, 2015               [Page 3]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


1.  Introduction

   This document defines the "Basic" Hypertext Transfer Protocol (HTTP)
   Authentication Scheme, which transmits credentials as user-id/
   password pairs, encoded using Base64 (HTTP authentication schemes are
   defined in [RFC7235]).

   This scheme is not considered to be a secure method of user
   authentication unless used in conjunction with some external secure
   system such as TLS (Transport Layer Security, [RFC5246]), as the
   user-id and password are passed over the network as cleartext.

   The "Basic" scheme previously was defined in Section 2 of [RFC2617].
   This document updates the definition, and also addresses
   internationalization issues by introducing the "charset"
   authentication parameter (Section 2.1).

   Other documents updating RFC 2617 are "Hypertext Transfer Protocol
   (HTTP/1.1): Authentication" ([RFC7235], defining the authentication
   framework), "HTTP Digest Access Authentication" ([DIGEST], updating
   the definition of the "Digest" authentication scheme), and "The
   Hypertext Transfer Protocol (HTTP) Authentication-Info and Proxy-
   Authentication-Info Response Header Fields" ([AUTHINFO]).  Taken
   together, these four documents obsolete RFC 2617.

1.1.  Terminology and Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   The terms protection space and realm are defined in Section 2.2 of
   [RFC7235].

   The terms (character) repertoire and character encoding scheme are
   defined in Section 2 of [RFC6365].

2.  The 'Basic' Authentication Scheme

   The "Basic" authentication scheme is based on the model that the
   client needs to authenticate itself with a user-id and a password for
   each protection space ("realm").  The realm value is a free-form
   string which can only be compared for equality with other realms on
   that server.  The server will service the request only if it can
   validate the user-id and password for the protection space applying
   to the requested resource.

   The "Basic" authentication scheme utilizes the Authentication



Reschke                 Expires September 1, 2015               [Page 4]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   Framework as follows:

   In challenges:

   o  the scheme name is "Basic"

   o  the authentication parameter "realm" is REQUIRED ([RFC7235],
      Section 2.2)

   o  the authentication parameter "charset" is OPTIONAL (see
      Section 2.1)

   o  no other authentication parameters are defined -- unknown
      parameters MUST be ignored by recipients, and new parameters can
      only be defined by revising this specification

   See also Section 4.1 of [RFC7235] which discusses the complexity of
   parsing challenges properly.

   Note that both scheme and parameter names are matched case-
   insensitively.

   For credentials, the "token68" syntax defined in Section 2.1 of
   [RFC7235] is used.  The value is computed based on user-id and
   password as defined below.

   Upon receipt of a request for a URI within the protection space that
   lacks credentials, the server can reply with a challenge using the
   401 (Unauthorized) status code ([RFC7235], Section 3.1) and the WWW-
   Authenticate header field ([RFC7235], Section 4.1).

   For instance:

      HTTP/1.1 401 Unauthorized
      Date: Mon, 04 Feb 2014 16:50:53 GMT
      WWW-Authenticate: Basic realm="WallyWorld"


   ...where "WallyWorld" is the string assigned by the server to
   identify the protection space.

   A proxy can respond with a similar challenge using the 407 (Proxy
   Authentication Required) status code ([RFC7235], Section 3.2) and the
   Proxy-Authenticate header field ([RFC7235], Section 4.3).

   To receive authorization, the client





Reschke                 Expires September 1, 2015               [Page 5]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   1.  obtains the user-id and password from the user,

   2.  constructs the user-pass by concatenating the user-id, a single
       colon (":") character, and the password,

   3.  encodes the user-pass into an octet sequence (see below for a
       discussion of character encoding schemes),

   4.  and obtains the basic-credentials by encoding this octet sequence
       using base64 ([RFC4648], Section 4) into a sequence of US-ASCII
       characters ([RFC0020]).

   The original definition of this authentication scheme failed to
   specify the character encoding scheme used to convert the user-pass
   into an octet sequence.  In practice, most implementations chose
   either a locale-specific encoding such as ISO-8859-1 ([ISO-8859-1]),
   or UTF-8 ([RFC3629]).  For backwards compatibility reasons, this
   specification continues to leave the default encoding undefined, as
   long as it is compatible with US-ASCII (mapping any US-ASCII
   character to a single octet matching the US-ASCII character code).

   The user-id and password MUST NOT contain any control characters (see
   "CTL" in Appendix B.1 of [RFC5234]).

   Furthermore, a user-id containing a colon character is invalid, as
   the first colon in a user-pass string separates user-id and password
   from one another; text after the first colon is part of the password.
   User-ids containing colons cannot be encoded in user-pass strings.

   Note that many user agents produce user-pass strings without checking
   that user-ids supplied by users do not contain colons; recipients
   will then treat part of the username input as part of the password.

   If the user agent wishes to send the user-id "Aladdin" and password
   "open sesame", it would use the following header field:

      Authorization: Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==

2.1.  The 'charset' auth-param

   In challenges, servers can use the "charset" authentication parameter
   to indicate the character encoding scheme they expect the user agent
   to use when generating "user-pass" (a sequence of octets).  This
   information is purely advisory.

   The only allowed value is "UTF-8", to be matched case-insensitively
   (see [RFC2978], Section 2.3).  It indicates that the server expects
   character data to be converted to Unicode Normalization Form C



Reschke                 Expires September 1, 2015               [Page 6]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   ("NFC", see Section 3 of [RFC5198]) and to be encoded into octets
   using the UTF-8 character encoding scheme ([RFC3629]).

   For the user-id, recipients MUST support all characters defined in
   the "UsernameCasePreserved" profile defined in in Section 3.3 of
   [PRECIS], with the exception of the colon (":") character.

   For the password, recipients MUST support all characters defined in
   the "OpaqueString" profile defined in in Section 4.2 of [PRECIS].

   Other values are reserved for future use.

      Note: The 'charset' is only defined on challenges, as "Basic" uses
      a single token for credentials ('token68' syntax); thus the
      credentials syntax isn't extensible.

      Note: The name 'charset' has been chosen for consistency with
      Section 2.1.1 of [RFC2831].  A better name would have been
      'accept-charset', as it is not about the message it appears in,
      but the server's expectation.

   In the example below, the server prompts for authentication in the
   "foo" realm, using Basic authentication, with a preference for the
   UTF-8 character encoding scheme:

      WWW-Authenticate: Basic realm="foo", charset="UTF-8"

   Note that the parameter value can be either a token or a quoted
   string; in this case the server chose to use the quoted-string
   notation.

   The user's name is "test", and the password is the string "123"
   followed by the Unicode character U+00A3 (POUND SIGN).  Using the
   character encoding scheme UTF-8, the user-pass becomes:

      't' 'e' 's' 't' ':' '1' '2' '3' pound
      74  65  73  74  3A  31  32  33  C2  A3

   Encoding this octet sequence in Base64 ([RFC4648], Section 4) yields:

      dGVzdDoxMjPCow==

   Thus the Authorization header field would be:

      Authorization: Basic dGVzdDoxMjPCow==

   Or, for proxy authentication:




Reschke                 Expires September 1, 2015               [Page 7]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


      Proxy-Authorization: Basic dGVzdDoxMjPCow==

2.2.  Re-using Credentials

   Given the absolute URI ([RFC3986], Section 4.3) of an authenticated
   request, the authentication scope of that request is obtained by
   removing all characters after the last slash ("/") character of the
   path component ("hier_part", see [RFC3986], Section 3).  A client
   SHOULD assume that resources identified by URIs with a prefix-match
   of the authentication scope are also within the protection space
   specified by the realm value of that authenticated request.

   A client MAY preemptively send the corresponding Authorization header
   field with requests for resources in that space without receipt of
   another challenge from the server.  Similarly, when a client sends a
   request to a proxy, it MAY reuse a user-id and password in the Proxy-
   Authorization header field without receiving another challenge from
   the proxy server.

   For example, given an authenticated request to:

      http://example.com/docs/index.html

   ...requests to the URIs below could use the known credentials:

      http://example.com/docs/
      http://example.com/docs/test.doc
      http://example.com/docs/?page=1

   ...while the URIs

      http://example.com/other/
      https://example.com/docs/

   would be considered to be outside the authentication scope.

   Note that a URI can be part of multiple authentication scopes (such
   as "http://example.com/" and "http://example.com/docs/").  This
   specification does not define which of these should be treated with
   higher priority.

3.  Internationalization Considerations

   User-ids or passwords containing characters outside the US-ASCII
   character repertoire will cause interoperability issues, unless both
   communication partners agree on what character encoding scheme is to
   be used.  Servers can use the new 'charset' parameter (Section 2.1)
   to indicate a preference of "UTF-8", increasing the probability that



Reschke                 Expires September 1, 2015               [Page 8]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   clients will switch to that encoding.

   The "realm" parameter carries data that can be considered textual,
   however [RFC7235] does not define a way to reliably transport non-US-
   ASCII characters.  This is a known issue that would need to be
   addressed in a revision to that specification.

4.  Security Considerations

   The Basic authentication scheme is not a secure method of user
   authentication, nor does it in any way protect the entity, which is
   transmitted in cleartext across the physical network used as the
   carrier.  HTTP does not prevent the addition of enhancements (such as
   schemes to use one-time passwords) to Basic authentication.

   The most serious flaw in Basic authentication is that it results in
   the cleartext transmission of the user's password over the physical
   network.  Many other authentication schemes address this problem.

   Because Basic authentication involves the cleartext transmission of
   passwords it SHOULD NOT be used (without enhancements such as HTTPS
   [RFC2818]) to protect sensitive or valuable information.

   A common use of Basic authentication is for identification purposes
   -- requiring the user to provide a user-id and password as a means of
   identification, for example, for purposes of gathering accurate usage
   statistics on a server.  When used in this way it is tempting to
   think that there is no danger in its use if illicit access to the
   protected documents is not a major concern.  This is only correct if
   the server issues both user-id and password to the users and in
   particular does not allow the user to choose his or her own password.
   The danger arises because naive users frequently reuse a single
   password to avoid the task of maintaining multiple passwords.

   If a server permits users to select their own passwords, then the
   threat is not only unauthorized access to documents on the server but
   also unauthorized access to any other resources on other systems that
   the user protects with the same password.  Furthermore, in the
   server's password database, many of the passwords may also be users'
   passwords for other sites.  The owner or administrator of such a
   system could therefore expose all users of the system to the risk of
   unauthorized access to all those other sites if this information is
   not maintained in a secure fashion.  This raises both security and
   privacy concerns ([RFC6973]).  If the same user-id and password
   combination is in use to access other accounts, such as an email or
   health portal account, personal information could be exposed.

   Basic authentication is also vulnerable to spoofing by counterfeit



Reschke                 Expires September 1, 2015               [Page 9]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   servers.  If a user can be led to believe that she is connecting to a
   host containing information protected by Basic authentication when,
   in fact, she is connecting to a hostile server or gateway, then the
   attacker can request a password, store it for later use, and feign an
   error.  Server implementers ought to guard against this sort of
   counterfeiting; in particular, software components which can take
   over control over the message framing on an existing connection (for
   instance, "NPH" ("non parsing of headers") scripts) need to be used
   carefully or not at all.

   Servers and proxies implementing Basic Authentication need to store
   user passwords in some form in order to authenticate a request.
   These passwords ought to be be stored in such a way that a leak of
   the password data doesn't make them trivially recoverable.  This is
   especially important when users are allowed to set their own
   passwords, since users are known to choose weak passwords and to
   reuse them across authentication realms.  While a full discussion of
   good password hashing techniques is beyond the scope of this
   document, server operators ought to make an effort to minimize risks
   to their users in the event of a password data leak.  For example,
   servers ought to avoid storing user passwords in plaintext or as
   unsalted digests.  For more discussion about modern password hashing
   techniques, see the "Password Hashing Competition"
   (<https://password-hashing.net>).

   The use of the UTF-8 character encoding scheme and of normalization
   introduces additional security considerations; see Section 10 of
   [RFC3629] and Section 6 of [RFC5198] for more information.

5.  IANA Considerations

   IANA maintains the registry of HTTP Authentication Schemes
   ([RFC7235]) at <http://www.iana.org/assignments/http-authschemes>.

   The entry for the "Basic" Authentication Scheme shall be updated by
   replacing the reference with a pointer to this specification.

6.  Acknowledgements

   This specification takes over the definition of the "Basic" HTTP
   Authentication Scheme, previously defined in RFC 2617.  We thank John
   Franks, Phillip M. Hallam-Baker, Jeffery L. Hostetler, Scott D.
   Lawrence, Paul J. Leach, Ari Luotonen, and Lawrence C. Stewart for
   their work on that specification, from which significant amounts of
   text were borrowed.  See Section 6 of [RFC2617] for further
   acknowledgements.

   The internationalization problem with respect to the character



Reschke                 Expires September 1, 2015              [Page 10]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   encoding scheme used for user-pass was reported as a Mozilla bug back
   in the year 2000 (see
   <https://bugzilla.mozilla.org/show_bug.cgi?id=41489> and also the
   more recent <https://bugzilla.mozilla.org/show_bug.cgi?id=656213>).
   It was Andrew Clover's idea to address it using a new auth-param.

   We also thank the members of the HTTPAuth Working Group and other
   reviewers, namely Stephen Farrell, Roy Fielding, Bjoern Hoehrmann,
   Daniel Kahn Gillmor, Tony Hansen, Kari Hurtta, Amos Jeffries,
   Benjamin Kaduk, Michael Koeller, Eric Lawrence, Barry Leiba, James
   Manger, Alexey Melnikov, Kathleen Moriarty, Juergen Schoenwaelder,
   Yaron Sheffer, Meral Shirazipour, Michael Sweet, and Martin Thomson
   for feedback on this revision.

7.  References

7.1.  Normative References

   [PRECIS]      Saint-Andre, P. and A. Melnikov, "Preparation,
                 Enforcement, and Comparison of Internationalized
                 Strings Representing Usernames and Passwords",
                 draft-ietf-precis-saslprepbis-13 (work in progress),
                 December 2014.

   [RFC0020]     Cerf, V., "ASCII format for network interchange",
                 RFC 20, October 1969.

   [RFC2119]     Bradner, S., "Key words for use in RFCs to Indicate
                 Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2978]     Freed, N. and J. Postel, "IANA Charset Registration
                 Procedures", BCP 19, RFC 2978, October 2000.

   [RFC3629]     Yergeau, F., "UTF-8, a transformation format of ISO
                 10646", STD 63, RFC 3629, November 2003.

   [RFC3986]     Berners-Lee, T., Fielding, R., and L. Masinter,
                 "Uniform Resource Identifier (URI): Generic Syntax",
                 STD 66, RFC 3986, January 2005.

   [RFC4648]     Josefsson, S., "The Base16, Base32, and Base64 Data
                 Encodings", RFC 4648, October 2006.

   [RFC5198]     Klensin, J. and M. Padlipsky, "Unicode Format for
                 Network Interchange", RFC 5198, March 2008.

   [RFC5234]     Crocker, D., Ed. and P. Overell, "Augmented BNF for
                 Syntax Specifications: ABNF", STD 68, RFC 5234,



Reschke                 Expires September 1, 2015              [Page 11]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


                 January 2008.

   [RFC6365]     Hoffman, P. and J. Klensin, "Terminology Used in
                 Internationalization in the IETF", BCP 166, RFC 6365,
                 September 2011.

   [RFC7235]     Fielding, R., Ed. and J. Reschke, Ed., "Hypertext
                 Transfer Protocol (HTTP/1.1): Authentication",
                 RFC 7235, June 2014.

7.2.  Informative References

   [AUTHINFO]    Reschke, J., "The Hypertext Transfer Protocol (HTTP)
                 Authentication-Info and Proxy-Authentication-Info
                 Response Header Fields",
                 draft-ietf-httpbis-auth-info-02 (work in progress),
                 February 2015.

   [DIGEST]      Shekh-Yusef, R., Ed., Ahrens, D., and S. Bremer, "HTTP
                 Digest Access Authentication",
                 draft-ietf-httpauth-digest-14 (work in progress),
                 February 2015.

   [ISO-8859-1]  International Organization for Standardization,
                 "Information technology -- 8-bit single-byte coded
                 graphic character sets -- Part 1: Latin alphabet No.
                 1", ISO/IEC 8859-1:1998, 1998.

   [RFC2617]     Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence,
                 S., Leach, P., Luotonen, A., and L. Stewart, "HTTP
                 Authentication: Basic and Digest Access
                 Authentication", RFC 2617, June 1999.

   [RFC2818]     Rescorla, E., "HTTP Over TLS", RFC 2818, May 2000.

   [RFC2831]     Leach, P. and C. Newman, "Using Digest Authentication
                 as a SASL Mechanism", RFC 2831, May 2000.

   [RFC5246]     Dierks, T. and E. Rescorla, "The Transport Layer
                 Security (TLS) Protocol Version 1.2", RFC 5246,
                 August 2008.

   [RFC6973]     Cooper, A., Tschofenig, H., Aboba, B., Peterson, J.,
                 Morris, J., Hansen, M., and R. Smith, "Privacy
                 Considerations for Internet Protocols", RFC 6973,
                 July 2013.

   [RFC7231]     Fielding, R., Ed. and J. Reschke, Ed., "Hypertext



Reschke                 Expires September 1, 2015              [Page 12]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


                 Transfer Protocol (HTTP/1.1): Semantics and Content",
                 RFC 7231, June 2014.

Appendix A.  Changes from RFC 2617

   The scheme definition has been rewritten to be consistent with newer
   specifications such as [RFC7235].

   The new authentication parameter "charset" has been added.  It is
   purely advisory, so existing implementations do not need to change,
   unless they want to take advantage of the additional information
   which previously wasn't available.

Appendix B.  Deployment Considerations for the 'charset' Parameter

B.1.  User Agents

   User agents not implementing 'charset' will continue to work as
   before, ignoring the new parameter.

   User agents which already default to the UTF-8 encoding implement
   'charset' by definition.

   Other user agents can keep their default behavior, and switch to
   UTF-8 when seeing the new parameter.

B.2.  Servers

   Servers that do not support non-US-ASCII characters in credentials do
   not require any changes to support 'charset'.

   Servers that need to support non-US-ASCII characters, but cannot use
   the UTF-8 character encoding scheme will not be affected; they will
   continue to function as well or as badly as before.

   Finally, servers that need to support non-US-ASCII characters and can
   use the UTF-8 character encoding scheme can opt in by specifying the
   charset parameter in the authentication challenge.  Clients that do
   understand the charset parameter will then start to use UTF-8, while
   other clients will continue to send credentials in their default
   encoding, broken credentials, or no credentials at all.  Until all
   clients are upgraded to support UTF-8, servers are likely to see both
   UTF-8 and "legacy" encodings in requests.  When processing as UTF-8
   fails (due to a failure to decode as UTF-8 or a mismatch of user-id/
   password), a server might try a fallback to the previously supported
   legacy encoding in order to accomodate these legacy clients.  Note
   that implicit retries need to be done carefully; for instance, some
   subsystems might detect repeated login failures and treat them as



Reschke                 Expires September 1, 2015              [Page 13]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   potential credentials guessing attack.

B.3.  Why not simply switch the default encoding to UTF-8?

   There are sites in use today that default to a local character
   encoding scheme, such as ISO-8859-1 ([ISO-8859-1]), and expect user
   agents to use that encoding.  Authentication on these sites will stop
   working if the user agent switches to a different encoding, such as
   UTF-8.

   Note that sites might even inspect the User-Agent header field
   ([RFC7231], Section 5.5.3) to decide which character encoding scheme
   to expect from the client.  Therefore they might support UTF-8 for
   some user agents, but default to something else for others.  User
   agents in the latter group will have to continue to do what they do
   today until the majority of these servers have been upgraded to
   always use UTF-8.

Appendix C.  Change Log (to be removed by RFC Editor before publication)

C.1.  Since RFC 2617

   This draft acts as a baseline for tracking subsequent changes to the
   specification.  As such, it extracts the definition of "Basic", plus
   the related Security Considerations, and also adds the IANA
   registration of the scheme.  Changes to the actual definition will be
   made in subsequent drafts.

C.2.  Since draft-ietf-httpauth-basicauth-update-00

   Fixed Base64 reference to point to an actual definition of Base64.

   Update HTTPbis and Digest references.

   Note that this spec, together with HTTPbis P7 and the Digest update,
   obsoletes RFC 2617.

   Rewrote text about authentication parameters and their extensibility.

   Pulled in the definition of the "charset" parameter.

   Removed a misleading statement about user-ids potentially being case-
   sensitive, as the same is true for passwords.

   Added TODOs with respect to path matching, and colons in user-ids.






Reschke                 Expires September 1, 2015              [Page 14]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


C.3.  Since draft-ietf-httpauth-basicauth-update-01

   Minor improvements on Security Considerations.

   Update Digest reference.

   Rewrite scheme definition as algorithm rather than pseudo-ABNF.

   Add a note about colons in user-id.

   Attempt to explain authentication scopes.

C.4.  Since draft-ietf-httpauth-basicauth-update-02

   Reference draft-ietf-precis-saslprepbis for the set of characters
   that need to be supported in user-ids and passwords.

C.5.  Since draft-ietf-httpauth-basicauth-update-03

   Update reference for draft-ietf-precis-saslprepbis (which renames
   "Password" to "OpaqueString").

   Mention HTTPS as enhancement for securing the transmission of
   credentials.

   Update DIGEST reference and change it to informative.

   Use RFC 20 as reference for ASCII.

C.6.  Since draft-ietf-httpauth-basicauth-update-04

   Fixed definition of authentication scope.  Updated DIGEST reference.

C.7.  Since draft-ietf-httpauth-basicauth-update-05

   Updated DIGEST and PRECIS references.

   Avoid the term "obfuscated".  Say "free-form string" instead of
   "opaque string" in realm description.

   Mention AUTHINFO as yet another draft that helps obsoleting RFC 2617.

   Add a note about the complexity of parsing challenges correctly.

C.8.  Since draft-ietf-httpauth-basicauth-update-06

   Clarify IANA action.




Reschke                 Expires September 1, 2015              [Page 15]


Internet-Draft     'Basic' HTTP Authentication Scheme      February 2015


   Remove leftover statement about use of ABNF (which was changed in
   -02).

   Security considerations: mention normalization and password storage.
   Rewrite advice on counterfeiting attacks.

   Update DIGEST reference.

   Rewrite text about colons in user-id.

   Expand deployment guidance.

Author's Address

   Julian F. Reschke
   greenbytes GmbH
   Hafenweg 16
   Muenster, NW  48155
   Germany

   EMail: julian.reschke@greenbytes.de
   URI:   http://greenbytes.de/tech/webdav/





























Reschke                 Expires September 1, 2015              [Page 16]