IP and ARP Over FC Working Group Kha Sin Teow
INTERNET-DRAFT Brocade Communications Systems, Inc.
Version 2.0
November 2, 1998
Definitions of Managed Objects
for the Fabric Element in Fibre Channel Standard
<draft-ietf-ipfc-fabric-element-mib-04.txt>
1. Status of this Memo
This document is an Internet Draft. Internet Drafts are working
documents of the Internet Engineering Task Force (IETF), its Areas, and
its Working Groups. Note that other groups may also distribute working
documents as Internet Drafts.
Internet Drafts are valid for a maximum of six months and may be
updated, replaced, or obsoleted by other documents at any time. It is
inappropriate to use Internet Drafts as reference material or to cite
them other than as a "working draft" or "work in progress."
To view the entire list of current Internet-Drafts, please check the
"1id-abstracts.txt" listing contained in the Internet-Drafts Shadow
Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern Europe),
ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific Rim),
ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast).
Distribution of this memo is unlimited. Please send comments to the IETF
ipfc Working Group: ipfc@standards.gadzoox.com.
2. Abstract
This memo defines an experimental portion of the Management Information
Base (MIB) for use with network management protocols in the Internet
community. In particular, it defines the objects for managing the
operations of the Fabric Element portion of the Fibre Channel Standards.
This memo specifies a MIB module in a manner that is both compliant to
the SNMPv2 SMI, and semantically identical to the peer SNMPv1
definitions.
Expiration Date: April 15, 1999 [Page 1]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
3. Overview
A Fibre Channel Fabric is an entity which interconnects Node Ports
(N_Ports) or Node Loop Ports (NL_Ports). It provides transport and
routing functions. In essence, a Fabric is a network of N_Ports and/or
NL_Ports to communicate with one another. A Fabric is composed of one
or more Fabric Element that are interconnected via Inter-element Links
(IEL). A Fabric Element is the smallest unit of a Fabric that meets the
definition of a Fabric. It must consist of at least three external
ports to connect to either N_Ports, NL_Ports or other Fabric Elements.
In general, a Fabric Element port may be of one of the following types:
(1) F_Port, a fabric port to connect to an N_Port ([1]);
(2) FL_Port, a fabric port that also supports a FC Arbitrated Loop
consisting of one or more NL_Ports ([4]).
(3) E_Port, an expansion port to connect to another Fabric Element
([2], [12]);
This memo shall define objects related to a Fabric Element, its F_Ports
and FL_Ports. Objects related to other types of FC ports shall be
defined in future.
For the rest of the document, the term, "FxPort", will be used to refer
to both F_Port and FL_Port where the distinction is not necessary. The
term, "NxPort" will be used to refer to both N_Port and NL_Port in the
similar fashion.
3.1. Management View of a Fabric Element
>From the management perspective, it is helpful to view a Fabric Element
to be consisting of multiple "modules". Each module is a grouping,
either physical or logical, of one or more ports that may be managed as
a sub-entity within the Fabric Element.
This module mapping is recommended but optional. A vendor may elect to
put all ports into a single module, or to divide the ports into modules
that do not match physical divisions.
The object fcFeModuleCapacity, which has a maximum value of 256,
indicates the maximum number of modules that a given Fabric Element may
contain. This value must remain constant from one management restart to
the next.
Expiration Date: April 15, 1999 [Page 2]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
Each module is uniquely identified by a module number in the range of 1
through fcFeModuleCapacity inclusive. Modules may come and go without
causing a management reset (of sysUpTime), and may be sparsely numbered
within the Fabric Element. That is, the module numbering is not
required to be contiguous. For instance, if a module is mapped
physically to a field-replaceable card and in a 13-card cage Fabric
Element, cards 3, 5, 6 and 7 may be installed. The vendor may choose to
label them as modules 3, 5, 6 and 7 respectively. In this example, the
value of fcFeModuleCapacity is 13.
A Fabric Element may also provide a proxy management on behalf of
another management entity by presenting it as one of its Fabric Element
modules.
The object fcFeModuleFxPortCapacity, which has a maximum value of 256,
indicates the maximum number of ports that a given module may contain.
The value of fcFeModuleFxPortCapacity must not change for a given
module. However, a module may be deleted from the Fabric Element and
replaced with a module containing a different number of ports. The
value of fcFeModuleLastChange will indicate that a change took place.
Each port within the Fabric Element is uniquely identified by a
combination of module index and port index, where port index is an
integer in the range 1..fcFeModuleFxPortCapacity. As with modules
within a Fabric Element, ports within a module may be sparsely numbered.
That is the port numbering is not required to be contiguous. Likewise,
ports may come and go within a module without causing a management
reset.
In terms of attachment, an F_Port will be attached to another N_Port;
and an FL_Port will be attached to one or up to 126 NL_Ports. In
general, an FxPort may be attached to one or more NxPorts. Each NxPort
associated with an FxPort will be uniquely identified by a combination
of module index, FxPort index and NxPort index. An NxPort index is an
integer in the range (1..126). The following diagram illustrates the
management view of a Fabric Element.
Expiration Date: April 15, 1999 [Page 3]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
#=======================================================#
# +----------------- - - - -----------------+ #
# | Module 1 [1] . . . [i] | #
# +----------------- - - - -----------------+ #
# o o o #
# +---------------------- - - - --------+ #
# | Module M [1] . . . [n] | #
# +---------------------- - - - -----^--+ #
#=====================================|=================#
|
One or more NxPorts { [1] . . . [L] }<-+
- - - - - - - - -
3.2. Structure of the Fabric Element MIB
This memo assumes that a Fabric Element has an SNMP entity (manager,
agent, or proxy agent) associated with its managed objects. The managed
objects are divided as follow:
- the Configuration group
- the Operation group
- the Error group
- the Accounting group
- the Capability group
In each group, scalar objects and table entries are defined.
The Configuration group contains configuration and service parameters
for the Fabric Element, modules and the FxPorts.
The Operation group contains the operational status and parameters of an
FxPort. The group also contains the service parameters that have been
established between the FxPort and its attached NxPort, if applicable.
The Error group contains counters tracking various types of errors
detected by each FxPort. The information may be used for diagnostics
and/or to derive the quality of the link between an FxPort and one or
more attached NxPorts.
The Accounting group contains statistic data suitable for deriving
accounting and performance information.
The Capability group contains parameters indicating the inherent
capability of the Fabric Element and each FxPort.
Expiration Date: April 15, 1999 [Page 4]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
4. Application of MIB-II to Fabric Element
4.1. The System Group
For the purposes of the sysServices object in the System Group of MIB-II
[9], Fibre Channel is a data link layer protocol. Thus, for a Fabric
Element, sysServices will have an integer value "2" or higher.
4.2. The Interface Group
The Interface Group of MIB-II defines generic managed objects for
managing interfaces. Although each FxPort of a Fabric Element is an
interface, either the mapping of some interface objects are
inappropriate or the definition of some interface objects are
insufficient for Fibre Channel. Therefore the Interface Group of MIB-II
will not be mapped in this memo.
4.3. The SNMP Group
The SNMP Group of MIB-II is mandatory for a Fabric Element that supports
an SNMP management entity.
5. Object Definitions
FCFABRIC-ELEMENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
experimental, Counter32, Gauge32, TimeTicks
FROM SNMPv2-SMI
TruthValue, DisplayString
FROM SNMPv2-TC;
fcFabric MODULE-IDENTITY
LAST-UPDATED "9811020000Z"
ORGANIZATION "IETF IPFC Working Group"
CONTACT-INFO " Kha Sin Teow
Brocade Communications Systems,
1901 Guadalupe Parkway,
San Jose, CA 95131
U.S.A
Tel: +1 408 487 8180
Fax: +1 408 487 8190
Email: khasin@Brocade.COM"
DESCRIPTION "The MIB module for Fibre Channel Fabric Element."
Expiration Date: April 15, 1999 [Page 5]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
REVISION "9811020000Z"
DESCRIPTION "Version 2.0"
::= { fibreChannel(XXX) 2 }
-- Fabric Element
fcFe OBJECT IDENTIFIER ::= { fcFabric 1 }
-- Groups under fcFe
fcFeConfig OBJECT IDENTIFIER ::= { fcFe 1 }
fcFeOp OBJECT IDENTIFIER ::= { fcFe 2 }
fcFeError OBJECT IDENTIFIER ::= { fcFe 3 }
fcFeAcct OBJECT IDENTIFIER ::= { fcFe 4 }
fcFeCap OBJECT IDENTIFIER ::= { fcFe 5 }
-- Type definitions.
MilliSeconds ::= INTEGER (0..2147383647)
MicroSeconds ::= INTEGER (0..2147383647)
FcNameId ::= OCTET STRING (SIZE (8))
-- Worldwide Name or Fibre Channel Name associated with
-- an FC entity. It's a Network_Destination_ID or
-- Network_Source_ID composed of a value up to 60 bits
-- wide, occupying the remaining 8 bytes while the first
-- nibble identifies the format of the Name_Identifier with
-- hex values:
-- 0: ignored
-- 1: IEEE 48-bit address,
-- 2: IEEE extended,
-- 3: Locally assigned,
-- 4: 32-bit IP address
FabricName ::= FcNameId
-- The Name Identifier of a Fabric. Each Fabric shall
-- provide a unique Fabric Name.
-- Only the following formats are allowed: IEEE48, and Local.
FcPortName ::= FcNameId
-- The Name Identifier associated with a port
-- Only the following formats are allowed:
-- IEEE48, IEEE extended, and Local.
FcAddressId ::= OCTET STRING (SIZE (3))
-- Fibre Channel Address Identifier. A 24-bit value unique
-- within the address space of a Fabric
Expiration Date: April 15, 1999 [Page 6]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
FcRxDataFieldSize ::= INTEGER (128..2112)
-- Receive Data_Field Size
FcBbCredit ::= INTEGER (0..32767)
-- Buffer-to-buffer Credit
-- FC-PH version
FcphVersion ::= INTEGER (0..255)
-- Class 1 Stacked Connect Support/Mode
FcStackedConnMode ::= INTEGER {
none (1),
transparent (2),
lockedDown (3)
}
-- Class of Service Capability Set
FcCosCap ::= INTEGER (0..127)
-- bit 0 Class F
-- bit 1 Class 1
-- bit 2 Class 2
-- bit 3 Class 3
-- bit 4 Class 4
-- bit 5 Class 5
-- bit 6 Class 6
-- bit 7 reserved for future
-- Module and Port Capacity
FcFeModuleCapacity ::= INTEGER (1..256)
FcFeFxPortCapacity ::= INTEGER (1..256)
-- Module, FxPort and NxPort Index
FcFeModuleIndex ::= INTEGER (1..256)
FcFeFxPortIndex ::= INTEGER (1..256)
FcFeNxPortIndex ::= INTEGER (1..126)
-- Port Mode
FcFxPortMode ::= INTEGER {
unknown (1),
fPort (2),
flPort (3)
}
Expiration Date: April 15, 1999 [Page 7]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- BB_Credit Model
FcBbCreditModel ::= INTEGER {
regular (1),
alternate (2)
}
-- The Configuration group
-- This group consists of scalar objects and tables.
-- It contains the configuration and service parameters
-- of the Fabric Element and the FxPorts.
-- The group represents a set of parameters associated with
-- the Fabric Element or an FxPort to support its NxPorts.
-- Implementation of this group is mandatory.
fcFabricName OBJECT-TYPE
SYNTAX FabricName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name_Identifier of the Fabric to which this Fabric
Element belongs."
::= { fcFeConfig 1 }
fcElementName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name_Identifier of the Fabric Element."
::= { fcFeConfig 2 }
fcFeModuleCapacity OBJECT-TYPE
SYNTAX FcFeModuleCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of modules in the Fabric Element,
regardless of their current state."
::= { fcFeConfig 3 }
-- The Module Table.
-- This table contains one entry for each module,
-- information of the modules.
Expiration Date: April 15, 1999 [Page 8]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFeModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFeModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each module in the
Fabric Element, information of the modules."
::= { fcFeConfig 4 }
fcFeModuleEntry OBJECT-TYPE
SYNTAX FcFeModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the configuration parameters of a
module."
INDEX { fcFeModuleIndex }
::= { fcFeModuleTable 1 }
FcFeModuleEntry ::=
SEQUENCE {
fcFeModuleIndex
FcFeModuleIndex,
fcFeModuleDescr
DisplayString,
fcFeModuleObjectID
OBJECT IDENTIFIER,
fcFeModuleOperStatus
INTEGER,
fcFeModuleLastChange
TimeTicks,
fcFeModuleFxPortCapacity
FcFeFxPortCapacity,
fcFeModuleName
FcNameId
}
fcFeModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module within the Fabric
Element for which this entry contains information. This
value is never greater than fcFeModuleCapacity."
Expiration Date: April 15, 1999 [Page 9]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
::= { fcFeModuleEntry 1 }
fcFeModuleDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the module. This value should
include the full name and version identification of the
module. It should contain printable ASCII characters."
::= { fcFeModuleEntry 2 }
fcFeModuleObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor's authoritative identification of the module.
This value may be allocated within the SMI enterprises
subtree (1.3.6.1.4.1) and provides a straight-forward
and unambiguous means for determining what kind of
module is being managed.
For example, this object could take the value
1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was
assigned the subtree 1.3.6.1.4.1.99649, and had assigned
the identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16
PlugInCard.'"
::= { fcFeModuleEntry 3 }
fcFeModuleOperStatus OBJECT-TYPE
SYNTAX INTEGER {
online (1), -- functional
offline (2), -- not available
testing (3), -- under testing
faulty (4) -- defective
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational status of the
module:
online(1) the module is functioning properly;
offline(2) the module is not available;
testing(3) the module is under testing; and
faulty(4) the module is defective in some way."
Expiration Date: April 15, 1999 [Page 10]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
::= { fcFeModuleEntry 4 }
fcFeModuleLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime when the
module entered its current operational status. A value
of zero indicates that the operational status of the
module has not changed since the agent last restarted."
::= { fcFeModuleEntry 5 }
fcFeModuleFxPortCapacity OBJECT-TYPE
SYNTAX FcFeFxPortCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FxPort that can be contained within the
module. Within each module, the ports are uniquely
numbered in the range from 1 to fcFeModuleFxPortCapacity
inclusive. However, the numbers are not required to be
contiguous."
::= { fcFeModuleEntry 6 }
fcFeModuleName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name_Identifier of the module."
::= { fcFeModuleEntry 7 }
-- the FxPort Configuration Table.
-- This table contains, one entry for each FxPort,
-- configuration parameters of the ports.
fcFxConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, configuration and service parameters of
the FxPorts."
::= { fcFeConfig 5 }
Expiration Date: April 15, 1999 [Page 11]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxConfEntry OBJECT-TYPE
SYNTAX FcFxConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the configuration and service
parameters of a FxPort."
INDEX { fcFxConfModuleIndex, fcFxConfFxPortIndex }
::= { fcFxConfTable 1 }
FcFxConfEntry ::=
SEQUENCE {
fcFxConfModuleIndex
FcFeModuleIndex,
fcFxConfFxPortIndex
FcFeFxPortIndex,
fcFxPortName
FcPortName,
-- FxPort common service parameters
fcFxPortFcphVersionHigh
FcphVersion,
fcFxPortFcphVersionLow
FcphVersion,
fcFxPortBbCredit
FcBbCredit,
fcFxPortRxBufSize
FcRxDataFieldSize,
fcFxPortRatov
MilliSeconds,
fcFxPortEdtov
MilliSeconds,
-- FxPort class service parameters
fcFxPortCosSupported
FcCosCap,
fcFxPortIntermixSupported
TruthValue,
fcFxPortStackedConnMode
FcStackedConnMode,
fcFxPortClass2SeqDeliv
TruthValue,
fcFxPortClass3SeqDeliv
TruthValue,
-- other configuration parameters
fcFxPortHoldTime
MicroSeconds
Expiration Date: April 15, 1999 [Page 12]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- Note: the following variables have been obsoleted
-- o fcFxPortBaudRate
-- o fcFxPortMedium
-- o fcFxPortTxType
-- o fcFxPortDistance
}
fcFxConfModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxConfEntry 1 }
fcFxConfFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxConfEntry 2 }
fcFxPortName OBJECT-TYPE
SYNTAX FcPortName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name identifier of this FxPort. Each FxPort has a
unique port name within the address space of the
Fabric."
::= { fcFxConfEntry 3 }
-- FxPort common service parameters
Expiration Date: April 15, 1999 [Page 13]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortFcphVersionHigh OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest or most recent version of FC-PH that the
FxPort is configured to support."
::= { fcFxConfEntry 4 }
fcFxPortFcphVersionLow OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest or earliest version of FC-PH that the FxPort
is configured to support."
::= { fcFxConfEntry 5 }
fcFxPortBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of receive buffers available for
holding Class 1 connect-request, Class 2 or 3 frames
from the attached NxPort. It is for buffer-to-buffer
flow control in the direction from the attached NxPort
(if applicable) to FxPort."
::= { fcFxConfEntry 6 }
fcFxPortRxBufSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The largest Data_Field Size (in octets) for an FT_1
frame that can be received by the FxPort."
::= { fcFxConfEntry 7 }
fcFxPortRatov OBJECT-TYPE
SYNTAX MilliSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Resource_Allocation_Timeout Value configured for the
FxPort. This is used as the timeout value for
Expiration Date: April 15, 1999 [Page 14]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
determining when to reuse an NxPort resource such as a
Recovery_Qualifier. It represents E_D_TOV (see next
object) plus twice the maximum time that a frame may be
delayed within the Fabric and still be delivered."
::= { fcFxConfEntry 8 }
fcFxPortEdtov OBJECT-TYPE
SYNTAX MilliSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The E_D_TOV value configured for the FxPort. The
Error_Detect_Timeout Value is used as the timeout value
for detecting an error condition."
::= { fcFxConfEntry 9 }
-- FxPort class service parameters
fcFxPortCosSupported OBJECT-TYPE
SYNTAX FcCosCap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the set of Classes of Service
supported by the FxPort."
::= { fcFxConfEntry 10 }
fcFxPortIntermixSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not the FxPort supports an
Intermixed Dedicated Connection."
::= { fcFxConfEntry 11 }
fcFxPortStackedConnMode OBJECT-TYPE
SYNTAX FcStackedConnMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the mode of Stacked Connect supported
by the FxPort."
::= { fcFxConfEntry 12 }
Expiration Date: April 15, 1999 [Page 15]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortClass2SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not Class 2 Sequential
Delivery is supported by the FxPort."
::= { fcFxConfEntry 13 }
fcFxPortClass3SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not Class 3 Sequential
Delivery is supported by the FxPort."
::= { fcFxConfEntry 14 }
-- other FxPort parameters
fcFxPortHoldTime OBJECT-TYPE
SYNTAX MicroSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum time (in microseconds) that the FxPort shall
hold a frame before discarding the frame if it is unable
to deliver the frame. The value 0 means that the FxPort
does not support this parameter."
::= { fcFxConfEntry 15 }
--
-- Obsoleted
-- fcFxPortBaudRate { fcFxConfEntry 16 }
--
--
-- Obsoleted
-- fcFxPortMedium { fcFxConfEntry 17 }
--
--
-- Obsoleted
-- fcFxPortTxType { fcFxConfEntry 18 }
--
--
-- Obsoleted
Expiration Date: April 15, 1999 [Page 16]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- fcFxPortDistance { fcFxConfEntry 19 }
--
-- the Operation group
-- This group consists of tables that contains operational
-- status and established service parameters for the Fabric
-- Element and the attached NxPorts.
-- Implementation of this group is mandatory.
-- The FxPort Operation table
-- This table contains, one entry for each FxPort,
-- the operational status and parameters of the FxPorts.
fcFxPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, operational status and parameters of the
FxPorts."
::= { fcFeOp 1 }
fcFxPortOperEntry OBJECT-TYPE
SYNTAX FcFxPortOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing operational status and parameters of
a FxPort."
INDEX { fcFxPortOperModuleIndex, fcFxPortOperFxPortIndex }
::= { fcFxPortOperTable 1 }
FcFxPortOperEntry ::=
SEQUENCE {
fcFxPortOperModuleIndex
FcFeModuleIndex,
fcFxPortOperFxPortIndex
FcFeFxPortIndex,
fcFxPortID
FcAddressId,
--
-- The following variables have been obsoleted:
Expiration Date: April 15, 1999 [Page 17]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- o fcFPortAttachedPortName
-- o fcFPortConnectedPort
--
fcFxPortBbCreditAvailable
Gauge32,
fcFxPortOperMode
FcFxPortMode,
fcFxPortAdminMode
FcFxPortMode
}
fcFxPortOperModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxPortOperEntry 1 }
fcFxPortOperFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxPortOperEntry 2 }
fcFxPortID OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address identifier by which this FxPort is
identified within the Fabric. The FxPort may assign its
address identifier to its attached NxPort(s) during
Fabric Login."
::= { fcFxPortOperEntry 3 }
--
Expiration Date: April 15, 1999 [Page 18]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- Obsoleted
-- fcFPortAttachedPortName { fcFxPortOperEntry 4 }
--
--
-- Obsoleted
-- fcFPortConnectedPort { fcFxPortOperEntry 5 }
--
fcFxPortBbCreditAvailable OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of buffers currently available for receiving
frames from the attached port in the buffer-to-buffer
flow control. The value should be less than or equal to
fcFxPortBbCredit."
::= { fcFxPortOperEntry 6 }
fcFxPortOperMode OBJECT-TYPE
SYNTAX FcFxPortMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational mode of the FxPort."
::= { fcFxPortOperEntry 7 }
fcFxPortAdminMode OBJECT-TYPE
SYNTAX FcFxPortMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired operational mode of the FxPort."
::= { fcFxPortOperEntry 8 }
-- The F_Port Fabric Login table
--
-- This table contains, one entry for each F_Port in the
-- Fabric Element, the Service Parameters that have been
-- established from the most recent Fabric Login
-- (implicit or explicit).
-- ************************************************************
-- This table was deprecated in Version 1.10 (and 1.9) and has
-- been removed from this version (2.0).
Expiration Date: April 15, 1999 [Page 19]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- ************************************************************
--
-- Obsoleted
-- fcFPortFlogiTable { fcFeOp 2 }
--
-- the FxPort Physical Level table
-- This table contains, one entry for each FxPort in the
-- Fabric Element, the physical level status and parameters
-- of the FxPorts.
fcFxPortPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, physical level status and parameters of
the FxPorts."
::= { fcFeOp 3 }
fcFxPortPhysEntry OBJECT-TYPE
SYNTAX FcFxPortPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing physical level status and parameters
of a FxPort."
INDEX { fcFxPortPhysModuleIndex, fcFxPortPhysFxPortIndex }
::= { fcFxPortPhysTable 1 }
FcFxPortPhysEntry ::=
SEQUENCE {
fcFxPortPhysModuleIndex
FcFeModuleIndex,
fcFxPortPhysFxPortIndex
FcFeFxPortIndex,
fcFxPortPhysAdminStatus
INTEGER,
fcFxPortPhysOperStatus
INTEGER,
fcFxPortPhysLastChange
TimeTicks,
fcFxPortPhysRttov
MilliSeconds
Expiration Date: April 15, 1999 [Page 20]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
}
fcFxPortPhysModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxPortPhysEntry 1 }
fcFxPortPhysFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxPortPhysEntry 2 }
fcFxPortPhysAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
online (1), -- place port online
offline (2), -- take port offline
testing (3) -- initiate test procedures
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the FxPort. A management station
may place the FxPort in a desired state by setting this
object accordingly. The testing(3) state indicates that
no operational frames can be passed. When a Fabric
Element initializes, all FxPorts start with
fcFxPortPhysAdminStatus in the offline(2) state. As the
result of either explicit management action or per
configuration information accessible by the Fabric
Element, fcFxPortPhysAdminStatus is then changed to
either the online(1) or testing(3) states, or remains in
the offline state."
::= { fcFxPortPhysEntry 3 }
Expiration Date: April 15, 1999 [Page 21]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortPhysOperStatus OBJECT-TYPE
SYNTAX INTEGER {
online (1), -- Login may proceed
offline (2), -- Login cannot proceed
testing (3), -- port is under test
link-failure (4) -- failure after online/testing
-- Other values may be used to indicate
-- diagnostic for failed test.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status of the FxPort. The
testing(3) indicates that no operational frames can
be passed. If fcFxPortPhysAdminStatus is offline(2)
then fcFxPortPhysOperStatus should be offline(2). If
fcFxPortPhysAdminStatus is changed to online(1) then
fcFxPortPhysOperStatus should change to online(1) if
the FxPort is ready to accept Fabric Login request
from the attached NxPort; it should proceed and
remain in the link-failure(4) state if and only if
there is a fault that prevents it from going to the
online(1) state."
::= { fcFxPortPhysEntry 4 }
fcFxPortPhysLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the FxPort
entered its current operational status. A value of
zero indicates that the FxPort's operational status
has not changed since the agent last restarted."
::= { fcFxPortPhysEntry 5 }
fcFxPortPhysRttov OBJECT-TYPE
SYNTAX MilliSeconds
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Receiver_Transmitter_Timeout value of the
FxPort. This is used by the receiver logic to detect
Loss of Synchronization."
::= { fcFxPortPhysEntry 6 }
Expiration Date: April 15, 1999 [Page 22]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- The FxPort Fabric Login table
--
-- This table contains, one entry for each FxPort in the
-- Fabric Element, the Service Parameters that have been
-- established from the most recent Fabric Login,
-- implicit or explicit.
fcFxlogiTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxlogiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, services parameters established from the
most recent Fabric Login, explicit or implicit."
::= { fcFeOp 4 }
fcFxlogiEntry OBJECT-TYPE
SYNTAX FcFxlogiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing service parameters established from
a successful Fabric Login."
INDEX { fcFxlogiModuleIndex, fcFxlogiFxPortIndex,
fcFxlogiNxPortIndex }
::= { fcFxlogiTable 1 }
FcFxlogiEntry ::=
SEQUENCE {
fcFxlogiModuleIndex
FcFeModuleIndex,
fcFxlogiFxPortIndex
FcFeFxPortIndex,
fcFxlogiNxPortIndex
FcFeNxPortIndex,
fcFxPortFcphVersionAgreed
FcphVersion,
fcFxPortNxPortBbCredit
FcBbCredit,
fcFxPortNxPortRxDataFieldSize
FcRxDataFieldSize,
fcFxPortCosSuppAgreed
FcCosCap,
fcFxPortIntermixSuppAgreed
Expiration Date: April 15, 1999 [Page 23]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
TruthValue,
fcFxPortStackedConnModeAgreed
FcStackedConnMode,
fcFxPortClass2SeqDelivAgreed
TruthValue,
fcFxPortClass3SeqDelivAgreed
TruthValue,
--
fcFxPortNxPortName
FcPortName,
fcFxPortConnectedNxPort
FcAddressId,
fcFxPortBbCreditModel
FcBbCreditModel
}
fcFxlogiModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxlogiEntry 1 }
fcFxlogiFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxlogiEntry 2 }
fcFxlogiNxPortIndex OBJECT-TYPE
SYNTAX FcFeNxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifies the associated NxPort in the
attachment for which the entry contains information."
::= { fcFxlogiEntry 3 }
Expiration Date: April 15, 1999 [Page 24]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortFcphVersionAgreed OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of FC-PH that the FxPort has agreed to
support from the Fabric Login"
::= { fcFxlogiEntry 4 }
fcFxPortNxPortBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of buffers available for holding Class
1 connect-request, Class 2 or Class 3 frames to be
transmitted to the attached NxPort. It is for buffer-
to-buffer flow control in the direction from FxPort to
NxPort. The buffer-to-buffer flow control mechanism is
indicated in the respective fcFxPortBbCreditModel.
[1](23.6.2.2)"
::= { fcFxlogiEntry 5 }
fcFxPortNxPortRxDataFieldSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Data Field Size of the attached NxPort. This
is a binary value that specifies the largest Data Field
Size for an FT_1 frame that can be received by the
NxPort. The value is in number of bytes and ranges from
128 to 2112 inclusive."
::= { fcFxlogiEntry 6 }
fcFxPortCosSuppAgreed OBJECT-TYPE
SYNTAX FcCosCap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A variable indicating that the attached NxPort has
requested the FxPort for the support of classes of
services and the FxPort has granted the request."
::= { fcFxlogiEntry 7 }
Expiration Date: April 15, 1999 [Page 25]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortIntermixSuppAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A variable indicating that the attached NxPort has
requested the FxPort for the support of Intermix and the
FxPort has granted the request. This flag is only valid
if Class 1 service is supported."
::= { fcFxlogiEntry 8 }
fcFxPortStackedConnModeAgreed OBJECT-TYPE
SYNTAX FcStackedConnMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A variable indicating whether the FxPort has agreed to
support stacked connect from the Fabric Login. This is
only meaningful if Class 1 service has been agreed."
::= { fcFxlogiEntry 9 }
fcFxPortClass2SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A variable indicating whether the FxPort has agreed to
support Class 2 sequential delivery from the Fabric
Login. This is only meaningful if Class 2 service has
been agreed."
::= { fcFxlogiEntry 10 }
fcFxPortClass3SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether the FxPort has agreed to
support Class 3 sequential delivery from the Fabric
Login. This is only meaningful if Class 3 service has
been agreed."
::= { fcFxlogiEntry 11 }
Expiration Date: April 15, 1999 [Page 26]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortNxPortName OBJECT-TYPE
SYNTAX FcPortName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port name of the attached NxPort, if applicable. If
the value of this object is '0000000000000000'H, this
FxPort has no NxPort attached to it."
::= { fcFxlogiEntry 12 }
fcFxPortConnectedNxPort OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address identifier of the destination FxPort with
which this FxPort is currently engaged in a either a
Class 1 or loop connection. If the value of this object
is '000000'H, this FxPort is not engaged in a
connection."
::= { fcFxlogiEntry 13 }
fcFxPortBbCreditModel OBJECT-TYPE
SYNTAX FcBbCreditModel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the BB_Credit model used by the
FxPort. The regular model refers to the Buffer-to-Buffer
flow control mechanism defined in FC-PH [1] is used
between the F_Port and the N_Port. For FL_Ports, the
Alternate Buffer-to-Buffer flow control mechanism as
defined in FC-AL [4] is used between the FL_Port and any
attached NL_Ports."
::= { fcFxlogiEntry 14 }
-- the Error group
-- This group consists of tables that contain information about
-- the various types of errors detected. The management station
-- may use the information in this group to determine the
-- quality of the link between the FxPort and its attached NxPort.
-- Implementation of this group is optional.
-- the FxPort Error table
-- This table contains, one entry for each FxPort in the Fabric
Expiration Date: April 15, 1999 [Page 27]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- Element, counters recording numbers of errors detected
-- since the management agent re-initialized.
-- The first 6 columnar objects after the port index corresponds
-- to the counters in the Link Error Status Block ([1](29.8)).
fcFxPortErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort,
counters that record the numbers of errors detected."
::= { fcFeError 1 }
fcFxPortErrorEntry OBJECT-TYPE
SYNTAX FcFxPortErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing error counters of a FxPort."
INDEX { fcFxPortErrorModuleIndex, fcFxPortErrorFxPortIndex }
::= { fcFxPortErrorTable 1 }
FcFxPortErrorEntry ::=
SEQUENCE {
fcFxPortErrorModuleIndex
FcFeModuleIndex,
fcFxPortErrorFxPortIndex
FcFeFxPortIndex,
fcFxPortLinkFailures
Counter32,
fcFxPortSyncLosses
Counter32,
fcFxPortSigLosses
Counter32,
fcFxPortPrimSeqProtoErrors
Counter32,
fcFxPortInvalidTxWords
Counter32,
fcFxPortInvalidCrcs
Counter32,
fcFxPortDelimiterErrors
Counter32,
fcFxPortAddressIdErrors
Counter32,
Expiration Date: April 15, 1999 [Page 28]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortLinkResetIns
Counter32,
fcFxPortLinkResetOuts
Counter32,
fcFxPortOlsIns
Counter32,
fcFxPortOlsOuts
Counter32
}
fcFxPortErrorModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxPortErrorEntry 1 }
fcFxPortErrorFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxPortErrorEntry 2 }
fcFxPortLinkFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link failures detected by this FxPort."
::= { fcFxPortErrorEntry 3 }
fcFxPortSyncLosses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of loss of synchronization detected by the
FxPort."
Expiration Date: April 15, 1999 [Page 29]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
::= { fcFxPortErrorEntry 4 }
fcFxPortSigLosses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of loss of signal detected by the FxPort."
::= { fcFxPortErrorEntry 5 }
fcFxPortPrimSeqProtoErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of primitive sequence protocol errors
detected by the FxPort."
::= { fcFxPortErrorEntry 6 }
fcFxPortInvalidTxWords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid transmission word detected by the
FxPort."
::= { fcFxPortErrorEntry 7 }
fcFxPortInvalidCrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid CRC detected by this FxPort."
::= { fcFxPortErrorEntry 8 }
fcFxPortDelimiterErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Delimiter Errors detected by this FxPort."
::= { fcFxPortErrorEntry 9 }
Expiration Date: April 15, 1999 [Page 30]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortAddressIdErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of address identifier errors detected by this
FxPort."
::= { fcFxPortErrorEntry 10 }
fcFxPortLinkResetIns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link Reset Protocol received by this
FxPort from the attached NxPort."
::= { fcFxPortErrorEntry 11 }
fcFxPortLinkResetOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link Reset Protocol issued by this FxPort
to the attached NxPort."
::= { fcFxPortErrorEntry 12 }
fcFxPortOlsIns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline Sequence received by this FxPort."
::= { fcFxPortErrorEntry 13 }
fcFxPortOlsOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline Sequence issued by this FxPort."
::= { fcFxPortErrorEntry 14 }
Expiration Date: April 15, 1999 [Page 31]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- Accounting Groups:
-- (1) Class 1 Accounting Group,
-- (2) Class 2 Accounting Group, and
-- (3) Class 3 Accounting Group.
-- Each group consists of a table that contains accounting
-- information for the FxPorts in the Fabric Element.
-- Implementation of each group is optional.
-- the Class 1 Accounting table
-- This table contains, one entry for each FxPort in the Fabric
-- Element, Counter32s for certain types of events occurred in the
-- the FxPorts since the the management agent has re-initialized.
-- Implementation of this group is optional.
fcFxPortC1AcctTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortC1AcctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, Class 1 accounting information recorded
since the management agent has re-initialized."
::= { fcFeAcct 1 }
fcFxPortC1AcctEntry OBJECT-TYPE
SYNTAX FcFxPortC1AcctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Class 1 accounting information for
each FxPort."
INDEX { fcFxPortC1AcctModuleIndex, fcFxPortC1AcctFxPortIndex
}
::= { fcFxPortC1AcctTable 1 }
FcFxPortC1AcctEntry ::=
SEQUENCE {
fcFxPortC1AcctModuleIndex
FcFeModuleIndex,
fcFxPortC1AcctFxPortIndex
FcFeFxPortIndex,
fcFxPortC1InConnections
Counter32,
fcFxPortC1OutConnections
Counter32,
Expiration Date: April 15, 1999 [Page 32]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortC1FbsyFrames
Counter32,
fcFxPortC1FrjtFrames
Counter32,
fcFxPortC1ConnTime
Counter32,
fcFxPortC1InFrames
Counter32,
fcFxPortC1OutFrames
Counter32,
fcFxPortC1InOctets
Counter32,
fcFxPortC1OutOctets
Counter32,
fcFxPortC1Discards
Counter32
}
fcFxPortC1AcctModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxPortC1AcctEntry 1 }
fcFxPortC1AcctFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxPortC1AcctEntry 2 }
fcFxPortC1InConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 connections successfully
established in which the attached NxPort is the source
Expiration Date: April 15, 1999 [Page 33]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
of the connect-request."
::= { fcFxPortC1AcctEntry 3 }
fcFxPortC1OutConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 connections successfully
established in which the attached NxPort is the
destination of the connect-request."
::= { fcFxPortC1AcctEntry 4 }
fcFxPortC1FbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_BSY frames generated by this FxPort
against Class 1 connect-request."
::= { fcFxPortC1AcctEntry 5 }
fcFxPortC1FrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_RJT frames generated by this FxPort
against Class 1 connect-request."
::= { fcFxPortC1AcctEntry 6 }
fcFxPortC1ConnTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cumulative time that this FxPort has been engaged in
Class 1 connection. The amount of time of each
connection is counted in octets from after a connect-
request has been accepted until the connection is
disengaged, either by an EOFdt or Link Reset."
::= { fcFxPortC1AcctEntry 7 }
Expiration Date: April 15, 1999 [Page 34]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortC1InFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frames (other than Class 1
connect-request) received by this FxPort from its
attached NxPort."
::= { fcFxPortC1AcctEntry 8 }
fcFxPortC1OutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frames (other than Class 1
connect-request) delivered through this FxPort to its
attached NxPort."
::= { fcFxPortC1AcctEntry 9 }
fcFxPortC1InOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort."
::= { fcFxPortC1AcctEntry 10 }
fcFxPortC1OutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frame octets, including the frame
delimiters, delivered through this FxPort its attached
NxPort."
::= { fcFxPortC1AcctEntry 11 }
fcFxPortC1Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frames discarded by this FxPort."
Expiration Date: April 15, 1999 [Page 35]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
::= { fcFxPortC1AcctEntry 12 }
-- the Class 2 Accounting table
-- This table contains, one entry for each FxPort in the Fabric
-- Element, Counter32s for certain types of events occurred in the
-- the FxPorts since the the management agent has re-initialized.
-- Implementation of this group is optional.
fcFxPortC2AcctTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortC2AcctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, Class 2 accounting information recorded
since the management agent has re-initialized."
::= { fcFeAcct 2 }
fcFxPortC2AcctEntry OBJECT-TYPE
SYNTAX FcFxPortC2AcctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Class 2 accounting information for
each FxPort."
INDEX { fcFxPortC2AcctModuleIndex, fcFxPortC2AcctFxPortIndex
}
::= { fcFxPortC2AcctTable 1 }
FcFxPortC2AcctEntry ::=
SEQUENCE {
fcFxPortC2AcctModuleIndex
FcFeModuleIndex,
fcFxPortC2AcctFxPortIndex
FcFeFxPortIndex,
fcFxPortC2InFrames
Counter32,
fcFxPortC2OutFrames
Counter32,
fcFxPortC2InOctets
Counter32,
fcFxPortC2OutOctets
Counter32,
fcFxPortC2Discards
Counter32,
Expiration Date: April 15, 1999 [Page 36]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortC2FbsyFrames
Counter32,
fcFxPortC2FrjtFrames
Counter32
}
fcFxPortC2AcctModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxPortC2AcctEntry 1 }
fcFxPortC2AcctFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxPortC2AcctEntry 2 }
fcFxPortC2InFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames received by this FxPort
from its attached NxPort."
::= { fcFxPortC2AcctEntry 3 }
fcFxPortC2OutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames delivered through this
FxPort to its attached NxPort."
::= { fcFxPortC2AcctEntry 4 }
Expiration Date: April 15, 1999 [Page 37]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortC2InOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort."
::= { fcFxPortC2AcctEntry 5 }
fcFxPortC2OutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frame octets, including the frame
delimiters, delivered through this FxPort to its
attached NxPort."
::= { fcFxPortC2AcctEntry 6 }
fcFxPortC2Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames discarded by this FxPort."
::= { fcFxPortC2AcctEntry 7 }
fcFxPortC2FbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_BSY frames generated by this FxPort
against Class 2 frames."
::= { fcFxPortC2AcctEntry 8 }
fcFxPortC2FrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_RJT frames generated by this FxPort
against Class 2 frames."
::= { fcFxPortC2AcctEntry 9 }
Expiration Date: April 15, 1999 [Page 38]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- the Class 3 Accounting Group
-- This table contains, one entry for each FxPort in the Fabric
-- Element, Counter32s for certain types of events occurred in the
-- the FxPorts since the management agent has re-initialized.
-- Implementation of this group is optional.
fcFxPortC3AcctTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortC3AcctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, Class 3 accounting information recorded
since the management agent has re-initialized."
::= { fcFeAcct 3 }
fcFxPortC3AcctEntry OBJECT-TYPE
SYNTAX FcFxPortC3AcctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Class 3 accounting information for
each FxPort."
INDEX { fcFxPortC3AcctModuleIndex, fcFxPortC3AcctFxPortIndex
}
::= { fcFxPortC3AcctTable 1 }
FcFxPortC3AcctEntry ::=
SEQUENCE {
fcFxPortC3AcctModuleIndex
FcFeModuleIndex,
fcFxPortC3AcctFxPortIndex
FcFeFxPortIndex,
fcFxPortC3InFrames
Counter32,
fcFxPortC3OutFrames
Counter32,
fcFxPortC3InOctets
Counter32,
fcFxPortC3OutOctets
Counter32,
fcFxPortC3Discards
Counter32
}
Expiration Date: April 15, 1999 [Page 39]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortC3AcctModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxPortC3AcctEntry 1 }
fcFxPortC3AcctFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxPortC3AcctEntry 2 }
fcFxPortC3InFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames received by this FxPort
from its attached NxPort."
::= { fcFxPortC3AcctEntry 3 }
fcFxPortC3OutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames delivered through this
FxPort to its attached NxPort."
::= { fcFxPortC3AcctEntry 4 }
fcFxPortC3InOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frame octets, including the frame
delimiters, received by this FxPort from its attached
Expiration Date: April 15, 1999 [Page 40]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
NxPort."
::= { fcFxPortC3AcctEntry 5 }
fcFxPortC3OutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frame octets, including the frame
delimiters, delivered through this FxPort to its
attached NxPort."
::= { fcFxPortC3AcctEntry 6 }
fcFxPortC3Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames discarded by this FxPort."
::= { fcFxPortC3AcctEntry 7 }
-- The Capability Group - consists of a table describing
-- information about what each FxPort is inherently capable
-- of operating or supporting.
-- A capability may be used, as expressed in its respective
-- object value in the Configuration group.
-- Implementation of this group is optional.
fcFxPortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort, the
capabilities of the port within the Fabric Element."
::= { fcFeCap 1 }
fcFxPortCapEntry OBJECT-TYPE
SYNTAX FcFxPortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the capabilities of a FxPort."
INDEX { fcFxPortCapModuleIndex, fcFxPortCapFxPortIndex }
::= { fcFxPortCapTable 1 }
Expiration Date: April 15, 1999 [Page 41]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
FcFxPortCapEntry ::=
SEQUENCE {
fcFxPortCapModuleIndex
FcFeModuleIndex,
fcFxPortCapFxPortIndex
FcFeFxPortIndex,
fcFxPortCapFcphVersionHigh
FcphVersion,
fcFxPortCapFcphVersionLow
FcphVersion,
fcFxPortCapBbCreditMax
FcBbCredit,
fcFxPortCapBbCreditMin
FcBbCredit,
fcFxPortCapRxDataFieldSizeMax
FcRxDataFieldSize,
fcFxPortCapRxDataFieldSizeMin
FcRxDataFieldSize,
fcFxPortCapCos
FcCosCap,
fcFxPortCapIntermix
TruthValue,
fcFxPortCapStackedConnMode
FcStackedConnMode,
fcFxPortCapClass2SeqDeliv
TruthValue,
fcFxPortCapClass3SeqDeliv
TruthValue,
fcFxPortCapHoldTimeMax
MicroSeconds,
fcFxPortCapHoldTimeMin
MicroSeconds
-- The following variables are obsoleted:
-- o fcFxPortCapBaudRates
-- o fcFxPortCapMedia
}
fcFxPortCapModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module containing the FxPort
for which this entry contains information."
::= { fcFxPortCapEntry 1 }
Expiration Date: April 15, 1999 [Page 42]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortCapFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module.
This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The
value remains constant for the identified FxPort until
the module is re-initialized."
::= { fcFxPortCapEntry 2 }
fcFxPortCapFcphVersionHigh OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest or most recent version of FC-PH that the
FxPort is capable of supporting."
::= { fcFxPortCapEntry 3 }
fcFxPortCapFcphVersionLow OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest or earliest version of FC-PH that the FxPort
is capable of supporting."
::= { fcFxPortCapEntry 4 }
fcFxPortCapBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers available for
holding Class 1 connect-request, Class 2 or Class 3
frames from the attached NxPort."
::= { fcFxPortCapEntry 5 }
fcFxPortCapBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of receive buffers available for
Expiration Date: April 15, 1999 [Page 43]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
holding Class 1 connect-request, Class 2 or Class 3
frames from the attached NxPort."
::= { fcFxPortCapEntry 6 }
fcFxPortCapRxDataFieldSizeMax OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size in bytes of the Data Field in a frame
that the FxPort is capable of receiving from its
attached NxPort."
::= { fcFxPortCapEntry 7 }
fcFxPortCapRxDataFieldSizeMin OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum size in bytes of the Data Field in a frame
that the FxPort is capable of receiving from its
attached NxPort."
::= { fcFxPortCapEntry 8 }
fcFxPortCapCos OBJECT-TYPE
SYNTAX FcCosCap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the set of Classes of Service that
the FxPort is capable of supporting."
::= { fcFxPortCapEntry 9 }
fcFxPortCapIntermix OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not the FxPort is capable
of supporting the intermixing of Class 2 and Class 3
frames during a Class 1 connection. This flag is only
valid if the port is capable of supporting Class 1
service."
::= { fcFxPortCapEntry 10 }
Expiration Date: April 15, 1999 [Page 44]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
fcFxPortCapStackedConnMode OBJECT-TYPE
SYNTAX FcStackedConnMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the mode of Stacked Connect request
that the FxPort is capable of supporting."
::= { fcFxPortCapEntry 11 }
fcFxPortCapClass2SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not the FxPort is capable
of supporting Class 2 Sequential Delivery."
::= { fcFxPortCapEntry 12 }
fcFxPortCapClass3SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not the FxPort is capable
of supporting Class 3 Sequential Delivery."
::= { fcFxPortCapEntry 13 }
fcFxPortCapHoldTimeMax OBJECT-TYPE
SYNTAX MicroSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum holding time (in microseconds) that the
FxPort is capable of supporting."
::= { fcFxPortCapEntry 14 }
fcFxPortCapHoldTimeMin OBJECT-TYPE
SYNTAX MicroSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum holding time (in microseconds) that the
FxPort is capable of supporting."
::= { fcFxPortCapEntry 15 }
--
Expiration Date: April 15, 1999 [Page 45]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
-- Obsoleted
-- fcFxPortCapBaudRates { fcFxPortCapEntry 16 }
--
--
-- Obsoleted
-- fcFxPortCapMedia { fcFxPortCapEntry 17 }
--
END
-- End of Object Definitions
6. Acknowledgements
The editors would like to thank the following individuals for their
assistance and constructive comments:
Vincent Guan, BCSI Gavin Bowlby, Gadzoox
Bent Stoevhase, BCSI Jeff Meyer, HP
John Y. Chu, IBM
Yakov Rekhter, IBM Martin Sachs, IBM
Dan Eisenhauer, IBM Beth Vanderbeck, IBM
Carl Zeitler, IBM Paul Griffiths, IBM
KC Chennappan, IBM Jessie Haug, IBM
Bob Cornelius, ANCOR Lansing Sloan, LLNL
Paul Rupert, LLNL Rich Taborak, Amdahl
Steve Wilson, Amdahl Jerry Rouse, IBM
Dal Allan, ENDL Hubert Huot, IBM
Venkat Rao, HP Amir Artsi, RADWAY International Ltd.
7. Approved References
[1] Fibre Channel Physical and Signaling Interface (FC-PH), American
National Standard for Information Systems X3.230-1994, Computer and
Business Equipment Manufacturers Association, Washington, DC.
[2] Fibre Channel Fabric Generic (FC-FG), American National Standard
for Information Systems X3.289-1996, Computer and Business
Equipment Manufacturers Association, Washington, DC.
[3] Fibre Channel Generic Services (FC-GS), American National Standard
for Information Systems X3.288-1996, Computer and Business
Equipment Manufacturers Association, Washington, DC.
Expiration Date: April 15, 1999 [Page 46]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
[4] Fibre Channel Arbitrated Loop (FC-AL), American National Standard
for Information Systems X3.272-1996, Computer and Business
Equipment Manufacturers Association, Washington, DC.
[5] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
Waldbusser, "Structure of Management Information for Version 2 of
the Simple Network Management Protocol (SNMPv2)", RFC 1902, January
1996.
[6] Rose M., and K. McCloghrie, "Structure and Identification of
Management Information for TCP/IP-based internets", RFC 1155,
Performance Systems International, Hughes LAN Systems, May 1990.
[7] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
RFC 1212, Performance Systems International, Hughes LAN Systems,
March 1991.
[8] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network
Management Protocol", RFC 1157, SNMP Research, Performance Systems
International, Performance Systems International, MIT Laboratory
for Computer Science, May 1990.
[9] McCloghrie K., and M. Rose, Editors, "Management Information Base
for Network Management of TCP/IP-based internets: MIB-II", RFC
1213, Performance Systems International, March 1991.
8. References Under Development
[1] Fibre Channel Physical and Signaling Interface-2 (FC-PH-2),
American National Standard for Information Systems, X3T11/Project
901D/Rev 7.4, Computer and Business Equipment Manufacturers
Association, Washington, DC.
[2] Fibre Channel Physical and Signaling Interface-3 (FC-PH-3),
American National Standard for Information Systems, X3T11/Project
1119D/Rev 9.2, Computer and Business Equipment Manufacturers
Expiration Date: April 15, 1999 [Page 47]
INTERNET DRAFT FC Fabric Element MIB November 2, 1998
Association, Washington, DC.
[3] Fibre Channel Switch Fabric (FC-SW), American National Standard for
Information Systems, X3T11/959D Rev 3.1, July 1997, Computer and
Business Equipment Manufacturers Association, Washington, DC.
[4] Fibre Channel Arbitrated Loop-2 (FC-AL-2), American National
Standard for Information Systems, X3T11/1133D Rev 5.2, Computer and
Business Equipment Manufacturers Association, Washington, DC.
9. Security Considerations
Security issues are not discussed in this memo.
10. Editors' Addresses
Kha Sin Teow
Brocade Communications Systems, Inc.
1901 Guadalupe Parkway,
San Jose, CA 95131
U.S.A.
Phone: +1 408-487-8180
Email: khasin@Brocade.COM
Expiration Date: April 15, 1999 [Page 48]
