Internet Draft Mark Bakke
<draft-ietf-ips-auth-mib-07.txt> Cisco Systems
Expires April 2006
James Muchow
Qlogic Corp.
October 2005
Definitions of Managed Objects for User Identity Authorization
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.html.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Copyright Notice
Copyright (C) The Internet Society (2005).
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in TCP/IP based internets.
In particular it defines objects for managing user identities and the
names, addresses, and credentials required manage access control, for
use with various protocols. This draft was motivated by the need for
the configuration of authorized user identities for the iSCSI
protocol, but has been extended to be useful for other protocols that
Bakke, Muchow Expires April 2006 [Page 1]
Internet Draft IPS Authorization MIB October 2005
have similar requirements. It is important to note that this MIB
module provides only the set of identities to be used within access
lists; it is the responsibility of other MIB modules making use of
this one to tie them to their own access lists or other authorization
control methods.
Table of Contents
1. Introduction..............................................2
2. Specification of Requirements.............................3
3. The Internet-Standard Management Framework................3
4. Relationship to Other MIB Modules.........................3
5. Relationship to the USM MIB Module........................4
6. Relationship SNMP Contexts................................4
7. Discussion................................................5
7.1. Authorization MIB Object Model..........................5
7.2. ipsAuthInstance.........................................6
7.3. ipsAuthIdentity.........................................7
7.4. ipsAuthIdentityName.....................................7
7.5. ipsAuthIdentityAddress..................................8
7.6. ipsAuthCredential.......................................8
7.7. IP, Fibre Channel, and Other Addresses..................9
7.8. Descriptors: Using OIDs in Place of Enumerated Types....9
7.9. Notifications..........................................10
8. MIB Definitions..........................................11
9. Security Considerations..................................33
10. IANA Considerations.....................................34
10.1. OID Assignment........................................34
10. Normative References....................................34
11. Informative References..................................35
Authors' Addresses......................................35
IPR Notice..............................................36
Full Copyright Notice...................................36
1. Introduction
This MIB module will be used to configure and/or look at the
configuration of user identities and their credential information.
For the purposes of this MIB module, a "user" identity does not need
to be an actual person; a user can also be a host, an application, a
cluster of hosts, or any other identifiable entity that can be
authorized to access a resource.
Most objects in this MIB module have a MAX-ACCESS of read-create;
this module is intended to allow configuration of user identities and
their names, addresses, and credentials. MIN-ACCESS for all objects
is read-only for those implementations that configure through other
Bakke, Muchow Expires April 2006 [Page 2]
Internet Draft IPS Authorization MIB October 2005
means, but require the ability to monitor user identities.
2. Specification of Requirements
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
3. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
4. Relationship to Other MIB Modules
The IPS-AUTH-MIB module does not directly address objects within
other modules. The identity address objects contain IPv4, IPv6, or
other address types, and as such may be indirectly related to objects
within the IPv4 [RFC2011] or IPv6 [RFC2465] MIB modules.
This MIB module does not provide actual authorization or access
control lists; it provides a means to identify entities that can be
included in other authorization lists. This should generally be done
in MIB modules that reference identities in this one. It also does
not cover login or authentication failure statistics or
notifications, as these are all fairly application-specific, and are
not generic enough to include here.
The user identity objects within this module are typically referenced
from other modules by a RowPointer within that module. A module
containing resources for which it requires a list of authorized user
identities may create such a list, with a single RowPointer within
each list element pointing to a user identity within this module.
This is neither required nor restricted by this MIB module.
Bakke, Muchow Expires April 2006 [Page 3]
Internet Draft IPS Authorization MIB October 2005
5. Relationship to the USM MIB Module
The User-based Security Model (USM) [RFC3414] also defines the
concept of a user, defining authentication and privacy protocols and
their credentials. The definition of USM includes the SNMP-USER-
BASED-SM-MIB module which allows configuration of SNMPv3 user
credentials to protect SNMPv3 messages. Although USM's users are not
related to the user identities managed by the IPS-AUTH-MIB module
defined in this document, USM will often be implemented on the same
system as the IPS-AUTH-MIB module, with the SNMP-USER-BASED-SM-MIB
module used to manage the security protecting SNMPv3 messages,
including those which access the IPS-AUTH-MIB module.
The term "user" in this document is distinct from an SNMPv3 user, and
is intended to include, but is not limited to, users of IP storage
devices. A "user" in this document is a collection of user names
(unique identifiers), user addresses, and credentials that can be
used together to determine whether an entity should be allowed access
to a resource. Each user can have multiple names, addresses, and
credentials. As a result, this MIB module is particularly suited to
managing users of storage resources, which are typically given access
control lists consisting of potentially multiple identifiers,
addresses, and credentials. This MIB module provides for
authorization lists only, and does not include setting of data
privacy parameters.
In contrast, an SNMPv3 user as defined in [RFC3414] has exactly one
user-name, one authentication protocol, and one privacy protocol,
along with their associated information and SNMP-specific
information, such as an engine ID. These objects are defined to
support exactly the information needed for SNMPv3 security.
For the remainder of this document, the term "user" means an IPS-
AUTH-MIB user identity.
6. Relationship to SNMP Contexts
Each non-scalar object in the IPS-AUTH-MIB module is indexed first by
an Instance. Each instance is a collection of identities that can be
used to authorize access to a resource. The use of an instance works
well with partitionable or hierarchical devices and fits in logically
with other management schemes. Instances do not replace SNMP
contexts, however they do provide a very simple way to assign a
collection of identities within a device to one or more SNMP
contexts, without having to do so for each identity's row.
Bakke, Muchow Expires April 2006 [Page 4]
Internet Draft IPS Authorization MIB October 2005
7. Discussion
This MIB module structure is intended to allow the configuration of a
list of user identities, each with a list of names, addresses,
credentials, and certificates which when combined will distinguish
that identity.
The IPS-AUTH-MIB module is structured around two primary "objects",
the authorization instance, and the identity, which serve as
containers for the remainder of the objects. This section contains a
brief description of the "object" hierarchy and a description of each
object, followed by a discussion of the actual SNMP table structure
within the objects.
7.1. Authorization MIB Object Model
The top-level object in this structure is the authorization instance,
which "contains" all of the other objects. The indexing hierarchy of
this module looks like:
ipsAuthInstance
-- A distinct authorization entity within the managed system.
-- Most implementations will have just one of these.
ipsAuthIdentity
-- A user identity, consisting of a set of identity names,
-- addresses, and credentials reflected in the following
-- objects:
ipsAuthIdentityName
-- A name for a user identity. A name should be globally
-- unique, and unchanging over time. Some protocols may
-- not require this one.
ipsAuthIdentityAddress
-- An address range, typically but not necessarily an
-- IPv4, IPv6, or Fibre Channel address range, at which
-- the identity is allowed to reside.
ipsAuthCredential
-- A single credential, such as a CHAP username,
-- which can be used to verify the identity.
ipsAuthCredChap
-- CHAP-specific attributes for an ipsAuthCredential
ipsAuthCredSrp
-- SRP-specific attributes
ipsAuthCredKerberos
-- Kerberos-specific attributes
Each identity contains the information necessary to identify a
particular end-point that wishes to access a service, such as iSCSI.
Bakke, Muchow Expires April 2006 [Page 5]
Internet Draft IPS Authorization MIB October 2005
An identity can contain multiple names, addresses, and credentials.
Each of these names, addresses, and credentials exists in its own
row. If multiple rows of one of these three types are present, they
are treated in an "OR" fashion; an entity to be authorized need only
match one of the rows. If rows of different types are present (e.g.
a name and an address), these are treated in an "AND" fashion; an
entity to be authorized must match at least one row from each
category. If there are no rows present of a category, this category
is ignored.
For example, if an ipsAuthIdentity contains two rows of
ipsAuthIdentityAddress, one row of ipsAuthCredential, and no rows of
ipsAuthIdentityName, an entity must match the Credential row and at
least one of the two Address rows to match the identity.
Index values such as ipsAuthInstIndex and ipsAuthIdentIndex are
referenced in multiple tables, and rows can be added and deleted. An
implementation should therefore attempt to keep all index values
persistent across reboots; index values for rows that have been
deleted must not be reused before a reboot.
7.2. ipsAuthInstance
The ipsAuthInstanceAttributesTable is the primary table of the IPS-
AUTH-MIB module. Every other table entry in this module includes the
index of an ipsAuthInstanceAttributesEntry as its primary index. An
authorization instance is basically a managed set of identities.
Many implementations will include just one authorization instance row
in this table. However, there will be cases where multiple rows in
this table may be used:
- A large system may be "partitioned" into multiple, distinct virtual
systems, perhaps sharing the SNMP agent but not their lists of
identities. Each virtual system would have its own authorization
instance.
- A set of stackable systems, each with their own set of identities,
may be represented by a common SNMP agent. Each individual system
would have its own authorization instance.
- Multiple protocols, each with their own set of identities, may
exist within a single system and be represented by a single SNMP
agent. In this case, each protocol may have its own authorization
instance.
An entry in this table is often referenced by its name
(ipsAuthInstDescr), which should be displayed to the user by the
Bakke, Muchow Expires April 2006 [Page 6]
Internet Draft IPS Authorization MIB October 2005
management station. When an implementation supports only one entry
in this table, the description may be returned as a zero-length
string.
7.3. ipsAuthIdentity
The ipsAuthIdentAttributesTable contains one entry for each
configured user identity. The identity contains only a description
of what the identity is used for; its attributes are all contained in
other tables, since they can each have multiple values.
Other MIB modules containing lists of users authorized to access a
particular resource should generally contain a RowPointer to the
ipsAuthIdentAttributesEntry which will, if authenticated, be allowed
access to the resource.
All other table entries make use of the indices to this table as
their primary indices.
7.4. ipsAuthIdentityName
The ipsAuthIdentNameAttributesTable contains a list of UTF-8 names,
each of which belong to, and may be used to identify, a particular
identity in the authIdentity table.
Implementations making use of the IPS-AUTH-MIB module may identify
their resources by names, addresses, or both. A name is typically a
unique (within the required scope), unchanging identifier for a
resource. It will normally meet some or all of the requirements for a
Uniform Resource Name [RFC1737], although a name in the context of
this MIB module does not need to be a URN. Identifiers that
typically change over time should generally be placed into the
ipsAuthIdentityAddress table; names that have no uniqueness
properties should usually be placed into the description attribute
for the identity.
An example of an identity name is the iSCSI Name, defined in
[RFC3720]. Any other MIB module defining names to be used as
ipsAuthIdentityName objects should specify how its names are unique,
and the domain within which they are unique.
If this table contains no entries associated with a particular user
identity, the implementation does not need to check any name
parameters when verifying that identity. If the table contains
multiple entries associated with a particular user identity, the
implementation should consider a match with any one of these entries
to be valid.
Bakke, Muchow Expires April 2006 [Page 7]
Internet Draft IPS Authorization MIB October 2005
7.5. ipsAuthIdentityAddress
The ipsAuthIdentAddrAttributesTable contains a list of addresses at
which the identity may reside. For example, an identity may be
allowed access to a resource only from a certain IP address, or only
if its address is in a certain range or set of ranges.
Each entry contains a starting and ending address. If a single
address is desired in the list, both starting and ending addresses
must be identical.
Each entry contains an AddrType attribute. This attribute contains
an enumeration registered as an IANA Address Family type [IANA-AF].
Although many implementations will use IPv4 or IPv6 address types for
these entries, any IANA-registered type may be used, as long as it
makes sense to the application.
Matching any address within any range within the list associated with
a particular identity is considered to be a valid match. If no
entries are present in this list for a given identity, its address is
automatically assumed to match the identity.
Netmasks are not supported, since an address range can express the
same thing with more flexibility. An application specifying
addresses using network masks may do so, and convert to and from
address ranges when reading or writing this MIB module.
7.6. ipsAuthCredential
The ipsAuthCredentialAttributesTable contains a list of credentials,
each of which may be used to verify a particular identity.
Each credential contains an authentication method to be used, such as
CHAP [RFC1994], SRP [RFC2945], or Kerberos [RFC1510]. This attribute
contains an object identifier instead of an enumerated type, allowing
other MIB modules to add their own authentication methods, without
modifying this MIB module.
For each entry in this table, there will exist an entry in another
table containing its attributes. The table in which to place the
entry depends on the AuthMethod attribute:
CHAP If the AuthMethod is set to the CHAP OID, an entry using the
same indices as the ipsAuthCredential will exist in the
ipsAuthCredChap table, which contains the CHAP username.
SRP If the AuthMethod is set to the SRP OID, an entry using the
same indices as the ipsAuthCredential will exist in the
Bakke, Muchow Expires April 2006 [Page 8]
Internet Draft IPS Authorization MIB October 2005
ipsAuthCredSrp table, which contains the SRP username.
Kerberos If the AuthMethod is set to the Kerberos OID, an entry using
the same indices as the ipsAuthCredential will exist in the
ipsAuthCredKerberos table, which contains the Kerberos
principal.
Other If the AuthMethod is set to any OID not defined in this
module, an entry using the same indices as the
ipsAuthCredential entry should be placed in the other module
that define whatever attributes are needed for that type of
credential.
7.7. IP, Fibre Channel, and Other Addresses
The IP addresses in this MIB module are represented by two
attributes, one of type AddressFamilyNumbers, and the other of type
AuthAddress. Each address can take on any of the types within the
list of address family numbers; the most likely being IPv4, IPv6, or
one of the Fibre Channel address types.
The type AuthAddress is an octet string. If the address family is
IPv4 or IPv6, the format is taken from the InetAddress specified in
[RFC4001]. If the address family is one of the Fibre Channel types,
the format is identical to the FcNameIdOrZero type defined in
[RFC4044].
7.8. Descriptors: Using OIDs in Place of Enumerated Types
Some attributes, particularly the authentication method attribute,
would normally require an enumerated type. However, implementations
will likely need to add new authentication method types of their own,
without extending this MIB module. To make this work, this module
defines a set of object identities within ipsAuthDescriptors. Each
of these object identities is basically an enumerated type.
Attributes that make use of these object identities have a value
which is an OID instead of an enumerated type. These OIDs can either
indicate the object identities defined in this module, or object
identities defined elsewhere, such as in an enterprise MIB module.
Those implementations that add their own authentication methods
should also define a corresponding object identity for each of these
methods within their own enterprise MIB module, and return its OID
whenever one of these attributes is using that method.
Bakke, Muchow Expires April 2006 [Page 9]
Internet Draft IPS Authorization MIB October 2005
7.9. Notifications
Monitoring of authentication failures and other notification events
are outside the scope of this MIB module, as they are generally
application-specific. No notifications are provided or required.
Bakke, Muchow Expires April 2006 [Page 10]
Internet Draft IPS Authorization MIB October 2005
8. MIB Definitions
IPS-AUTH-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32,
mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, AutonomousType, StorageType
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC 3411
AddressFamilyNumbers
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
;
ipsAuthMibModule MODULE-IDENTITY
LAST-UPDATED "200510180000Z" -- October 18, 2005
ORGANIZATION "IETF IPS Working Group"
CONTACT-INFO
"
Mark Bakke
Postal: Cisco Systems, Inc
7900 International Drive, Suite 400
Bloomington, MN
USA 55425
E-mail: mbakke@cisco.com
James Muchow
Postal: Qlogic Corp.
6321 Bury Dr.
Eden Prairie, MN
USA 55346
E-Mail: james.muchow@qlogic.com"
DESCRIPTION
"The IP Storage Authorization MIB module.
Copyright (C) The Internet Society (2005). This version of
Bakke, Muchow Expires April 2006 [Page 11]
Internet Draft IPS Authorization MIB October 2005
this MIB module is part of RFC yyyy; see the RFC itself for
full legal notices."
-- RFC Ed.: replace yyyy with actual RFC number & remove this note
REVISION "200510180000Z" -- October 18, 2005
DESCRIPTION
"Initial version of the IP Storage Authentication MIB module"
::= { mib-2 xx } -- xx to be assigned by IANA
ipsAuthNotifications OBJECT IDENTIFIER ::= { ipsAuthMibModule 0 }
ipsAuthObjects OBJECT IDENTIFIER ::= { ipsAuthMibModule 1 }
ipsAuthConformance OBJECT IDENTIFIER ::= { ipsAuthMibModule 2 }
-- Textual Conventions
IpsAuthAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IP Storage requires the use of address information
that uses not only the InetAddress type defined in the
INET-ADDRESS-MIB, but also Fibre Channel type defined
in the Fibre Channel Management MIB. Although these
address types are recognized in the IANA Address Family
Numbers MIB, the addressing mechanisms have not been
merged into a well-known, common type. This data type,
the IpsAuthAddress, performs this function for this MIB
module."
REFERENCE
"IANA-ADDRESS-FAMILY-NUMBERS-MIB;
INET-ADDRESS-MIB (RFC 2851);
FC-MGMT-MIB (RFC 4044)."
SYNTAX OCTET STRING (SIZE(0..255))
--******************************************************************
ipsAuthDescriptors OBJECT IDENTIFIER ::= { ipsAuthObjects 1 }
ipsAuthMethodTypes OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Registration point for Authentication Method Types."
REFERENCE "RFC 3720, iSCSI Protocol Specification."
::= { ipsAuthDescriptors 1 }
ipsAuthMethodNone OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The authoritative identifier when no authentication
Bakke, Muchow Expires April 2006 [Page 12]
Internet Draft IPS Authorization MIB October 2005
method is used."
REFERENCE "RFC 3720, iSCSI Protocol Specification."
::= { ipsAuthMethodTypes 1 }
ipsAuthMethodSrp OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The authoritative identifier when the authentication
method is SRP."
REFERENCE "RFC 3720, iSCSI Protocol Specification."
::= { ipsAuthMethodTypes 2 }
ipsAuthMethodChap OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The authoritative identifier when the authentication
method is CHAP."
REFERENCE "RFC 3720, iSCSI Protocol Specification."
::= { ipsAuthMethodTypes 3 }
ipsAuthMethodKerberos OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The authoritative identifier when the authentication
method is Kerberos."
REFERENCE "RFC 3720, iSCSI Protocol Specification."
::= { ipsAuthMethodTypes 4 }
--******************************************************************
ipsAuthInstance OBJECT IDENTIFIER ::= { ipsAuthObjects 2 }
-- Instance Attributes Table
ipsAuthInstanceAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsAuthInstanceAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Authorization instances present on the system."
::= { ipsAuthInstance 2 }
ipsAuthInstanceAttributesEntry OBJECT-TYPE
SYNTAX IpsAuthInstanceAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (row) containing management information
Bakke, Muchow Expires April 2006 [Page 13]
Internet Draft IPS Authorization MIB October 2005
applicable to a particular Authorization instance."
INDEX { ipsAuthInstIndex }
::= { ipsAuthInstanceAttributesTable 1 }
IpsAuthInstanceAttributesEntry ::= SEQUENCE {
ipsAuthInstIndex Unsigned32,
ipsAuthInstDescr SnmpAdminString,
ipsAuthInstStorageType StorageType
}
ipsAuthInstIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer used to uniquely identify a
particular authorization instance. This index value
must not be modified or reused by an agent unless
a reboot has occurred. An agent should attempt to
keep this value persistent across reboots."
::= { ipsAuthInstanceAttributesEntry 1 }
ipsAuthInstDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A character string, determined by the implementation to
describe the authorization instance. When only a single
instance is present, this object may be set to the
zero-length string; with multiple authorization
instances, it must be set to a unique value in an
implementation-dependent manner to describe the purpose
of the respective instance. If this is deployed in a
master agent with more than one subagent implementing
this MIB module, the master agent is responsible for
ensuring that this object is unique across all
subagents."
::= { ipsAuthInstanceAttributesEntry 2 }
ipsAuthInstStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The storage type for all read-write objects within this
row. Rows in this table are always created via an
external process, and may have a storage type of readOnly
Bakke, Muchow Expires April 2006 [Page 14]
Internet Draft IPS Authorization MIB October 2005
or permanent. Conceptual rows having the value 'permanent'
need not allow write access to any columnar objects in
the row.
If this object has the value 'volatile', modifications
to read-write objects in this row are not persistent
across reboots. If this object has the value
'nonVolatile', modifications to objects in this row
are persistent.
An implementation may choose to allow this object
to be set to either 'nonVolatile' or 'volatile',
allowing the management application to choose this
behavior."
DEFVAL { volatile }
::= { ipsAuthInstanceAttributesEntry 3 }
ipsAuthIdentity OBJECT IDENTIFIER ::= { ipsAuthObjects 3 }
-- User Identity Attributes Table
ipsAuthIdentAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsAuthIdentAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of user identities, each belonging to a
particular ipsAuthInstance."
::= { ipsAuthIdentity 1 }
ipsAuthIdentAttributesEntry OBJECT-TYPE
SYNTAX IpsAuthIdentAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (row) containing management information
describing a user identity within an authorization
instance on this node."
INDEX { ipsAuthInstIndex, ipsAuthIdentIndex }
::= { ipsAuthIdentAttributesTable 1 }
IpsAuthIdentAttributesEntry ::= SEQUENCE {
ipsAuthIdentIndex Unsigned32,
ipsAuthIdentDescription SnmpAdminString,
ipsAuthIdentRowStatus RowStatus,
ipsAuthIdentStorageType StorageType
}
Bakke, Muchow Expires April 2006 [Page 15]
Internet Draft IPS Authorization MIB October 2005
ipsAuthIdentIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer used to uniquely identify a
particular identity instance within an authorization
instance present on the node. This index value
must not be modified or reused by an agent unless
a reboot has occurred. An agent should attempt to
keep this value persistent across reboots."
::= { ipsAuthIdentAttributesEntry 1 }
ipsAuthIdentDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A character string describing this particular identity."
::= { ipsAuthIdentAttributesEntry 2 }
ipsAuthIdentRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field allows entries to be dynamically added and
removed from this table via SNMP. When adding a row to
this table, all non-Index/RowStatus objects must be set.
Rows may be discarded using RowStatus."
::= { ipsAuthIdentAttributesEntry 3 }
ipsAuthIdentStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for all read-create objects in this row.
Rows in this table that were created through an external
process may have a storage type of readOnly or permanent."
DEFVAL { nonVolatile }
::= { ipsAuthIdentAttributesEntry 4 }
ipsAuthIdentityName OBJECT IDENTIFIER ::= { ipsAuthObjects 4 }
-- User Initiator Name Attributes Table
ipsAuthIdentNameAttributesTable OBJECT-TYPE
Bakke, Muchow Expires April 2006 [Page 16]
Internet Draft IPS Authorization MIB October 2005
SYNTAX SEQUENCE OF IpsAuthIdentNameAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of unique names that can be used to positively
identify a particular user identity."
::= { ipsAuthIdentityName 1 }
ipsAuthIdentNameAttributesEntry OBJECT-TYPE
SYNTAX IpsAuthIdentNameAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (row) containing management information
applicable to a unique identity name which can be used
to identify a user identity within a particular
authorization instance."
INDEX { ipsAuthInstIndex, ipsAuthIdentIndex,
ipsAuthIdentNameIndex }
::= { ipsAuthIdentNameAttributesTable 1 }
IpsAuthIdentNameAttributesEntry ::= SEQUENCE {
ipsAuthIdentNameIndex Unsigned32,
ipsAuthIdentName SnmpAdminString,
ipsAuthIdentNameRowStatus RowStatus,
ipsAuthIdentNameStorageType StorageType
}
ipsAuthIdentNameIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer used to uniquely identify a
particular identity name instance within an
ipsAuthIdentity within an authorization instance.
This index value must not be modified or reused by
an agent unless a reboot has occurred. An agent
should attempt to keep this value persistent across
reboots."
::= { ipsAuthIdentNameAttributesEntry 1 }
ipsAuthIdentName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A character string which is the unique name of an
Bakke, Muchow Expires April 2006 [Page 17]
Internet Draft IPS Authorization MIB October 2005
identity that may be used to identify this ipsAuthIdent
entry."
::= { ipsAuthIdentNameAttributesEntry 2 }
ipsAuthIdentNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field allows entries to be dynamically added and
removed from this table via SNMP. When adding a row to
this table, all non-Index/RowStatus objects must be set.
Rows may be discarded using RowStatus."
::= { ipsAuthIdentNameAttributesEntry 3 }
ipsAuthIdentNameStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for all read-create objects in this row.
Rows in this table that were created through an external
process may have a storage type of readOnly or permanent."
DEFVAL { nonVolatile }
::= { ipsAuthIdentNameAttributesEntry 4 }
ipsAuthIdentityAddress OBJECT IDENTIFIER ::= { ipsAuthObjects 5 }
-- User Initiator Address Attributes Table
ipsAuthIdentAddrAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsAuthIdentAddrAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of address ranges that are allowed to serve
as the endpoint addresses of a particular identity.
An address range includes a starting and ending address
and an optional netmask, and an address type indicator,
which can specify whether the address is IPv4, IPv6,
FC-WWPN, or FC-WWNN."
::= { ipsAuthIdentityAddress 1 }
ipsAuthIdentAddrAttributesEntry OBJECT-TYPE
SYNTAX IpsAuthIdentAddrAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Bakke, Muchow Expires April 2006 [Page 18]
Internet Draft IPS Authorization MIB October 2005
"An entry (row) containing management information
applicable to an address range which is used as part
of the authorization of an identity
within an authorization instance on this node."
INDEX { ipsAuthInstIndex, ipsAuthIdentIndex,
ipsAuthIdentAddrIndex }
::= { ipsAuthIdentAddrAttributesTable 1 }
IpsAuthIdentAddrAttributesEntry ::= SEQUENCE {
ipsAuthIdentAddrIndex Unsigned32,
ipsAuthIdentAddrType AddressFamilyNumbers,
ipsAuthIdentAddrStart IpsAuthAddress,
ipsAuthIdentAddrEnd IpsAuthAddress,
ipsAuthIdentAddrRowStatus RowStatus,
ipsAuthIdentAddrStorageType StorageType
}
ipsAuthIdentAddrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer used to uniquely identify a
particular ipsAuthIdentAddress instance within an
ipsAuthIdentity within an authorization instance
present on the node.
This index value must not be modified or reused by
an agent unless a reboot has occurred. An agent
should attempt to keep this value persistent across
reboots."
::= { ipsAuthIdentAddrAttributesEntry 1 }
ipsAuthIdentAddrType OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of Address in the ipsAuthIdentAddress
start, end, and mask fields. This type is taken
from the IANA address family types; more types may
be registered independently of this MIB module."
::= { ipsAuthIdentAddrAttributesEntry 2 }
ipsAuthIdentAddrStart OBJECT-TYPE
SYNTAX IpsAuthAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
Bakke, Muchow Expires April 2006 [Page 19]
Internet Draft IPS Authorization MIB October 2005
"The starting address of the allowed address range."
::= { ipsAuthIdentAddrAttributesEntry 3 }
ipsAuthIdentAddrEnd OBJECT-TYPE
SYNTAX IpsAuthAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ending address of the allowed address range.
If the ipsAuthIdentAddrEntry specifies a single
address, this shall match the ipsAuthIdentAddrStart."
::= { ipsAuthIdentAddrAttributesEntry 4 }
ipsAuthIdentAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field allows entries to be dynamically added and
removed from this table via SNMP. When adding a row to
this table, all non-Index/RowStatus objects must be set.
Rows may be discarded using RowStatus."
::= { ipsAuthIdentAddrAttributesEntry 5 }
ipsAuthIdentAddrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for all read-create objects in this row.
Rows in this table that were created through an external
process may have a storage type of readOnly or permanent."
DEFVAL { nonVolatile }
::= { ipsAuthIdentAddrAttributesEntry 6 }
ipsAuthCredential OBJECT IDENTIFIER ::= { ipsAuthObjects 6 }
-- Credential Attributes Table
ipsAuthCredentialAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsAuthCredentialAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of credentials related to user identities
that are allowed as valid authenticators of the
particular identity."
::= { ipsAuthCredential 1 }
Bakke, Muchow Expires April 2006 [Page 20]
Internet Draft IPS Authorization MIB October 2005
ipsAuthCredentialAttributesEntry OBJECT-TYPE
SYNTAX IpsAuthCredentialAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (row) containing management information
applicable to a credential which verifies a user
identity within an authorization instance."
INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
::= { ipsAuthCredentialAttributesTable 1 }
IpsAuthCredentialAttributesEntry ::= SEQUENCE {
ipsAuthCredIndex Unsigned32,
ipsAuthCredAuthMethod AutonomousType,
ipsAuthCredRowStatus RowStatus,
ipsAuthCredStorageType StorageType
}
ipsAuthCredIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer used to uniquely identify a
particular Credential instance within an instance
present on the node.
This index value must not be modified or reused by
an agent unless a reboot has occurred. An agent
should attempt to keep this value persistent across
reboots."
::= { ipsAuthCredentialAttributesEntry 1 }
ipsAuthCredAuthMethod OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains an OBJECT IDENTIFIER
which identifies the authentication method
used with this credential.
Some standardized values for this object are defined
within the ipsAuthMethods subtree."
::= { ipsAuthCredentialAttributesEntry 2 }
ipsAuthCredRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
Bakke, Muchow Expires April 2006 [Page 21]
Internet Draft IPS Authorization MIB October 2005
STATUS current
DESCRIPTION
"This field allows entries to be dynamically added and
removed from this table via SNMP. When adding a row to
this table, all non-Index/RowStatus objects must be set.
Rows may be discarded using RowStatus."
::= { ipsAuthCredentialAttributesEntry 3 }
ipsAuthCredStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for all read-create objects in this row.
Rows in this table that were created through an external
process may have a storage type of readOnly or permanent."
DEFVAL { nonVolatile }
::= { ipsAuthCredentialAttributesEntry 4 }
ipsAuthCredChap OBJECT IDENTIFIER ::= { ipsAuthObjects 7 }
-- Credential Chap-Specific Attributes Table
ipsAuthCredChapAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsAuthCredChapAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of CHAP attributes for credentials that
use ipsAuthMethodChap as its ipsAuthCredAuthMethod."
::= { ipsAuthCredChap 1 }
ipsAuthCredChapAttributesEntry OBJECT-TYPE
SYNTAX IpsAuthCredChapAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (row) containing management information
applicable to a credential which uses
ipsAuthMethodChap as their ipsAuthCredAuthMethod."
INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
::= { ipsAuthCredChapAttributesTable 1 }
IpsAuthCredChapAttributesEntry ::= SEQUENCE {
ipsAuthCredChapUserName SnmpAdminString,
ipsAuthCredChapRowStatus RowStatus,
ipsAuthCredChapStorageType StorageType
}
Bakke, Muchow Expires April 2006 [Page 22]
Internet Draft IPS Authorization MIB October 2005
ipsAuthCredChapUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A character string containing the CHAP user name for this
credential."
REFERENCE
"W. Simpson, RFC 1994: PPP Challenge Handshake
Authentication Protocol (CHAP), August 1996"
::= { ipsAuthCredChapAttributesEntry 1 }
ipsAuthCredChapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field allows entries to be dynamically added and
removed from this table via SNMP. When adding a row to
this table, all non-Index/RowStatus objects must be set.
Rows may be discarded using RowStatus."
::= { ipsAuthCredChapAttributesEntry 2 }
ipsAuthCredChapStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for all read-create objects in this row.
Rows in this table that were created through an external
process may have a storage type of readOnly or permanent."
DEFVAL { nonVolatile }
::= { ipsAuthCredChapAttributesEntry 3 }
ipsAuthCredSrp OBJECT IDENTIFIER ::= { ipsAuthObjects 8 }
-- Credential Srp-Specific Attributes Table
ipsAuthCredSrpAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsAuthCredSrpAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of SRP attributes for credentials that
use ipsAuthMethodSrp as their ipsAuthCredAuthMethod."
::= { ipsAuthCredSrp 1 }
ipsAuthCredSrpAttributesEntry OBJECT-TYPE
Bakke, Muchow Expires April 2006 [Page 23]
Internet Draft IPS Authorization MIB October 2005
SYNTAX IpsAuthCredSrpAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (row) containing management information
applicable to a credential which uses
ipsAuthMethodSrp as its ipsAuthCredAuthMethod."
INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
::= { ipsAuthCredSrpAttributesTable 1 }
IpsAuthCredSrpAttributesEntry ::= SEQUENCE {
ipsAuthCredSrpUserName SnmpAdminString,
ipsAuthCredSrpRowStatus RowStatus,
ipsAuthCredSrpStorageType StorageType
}
ipsAuthCredSrpUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A character string containing the SRP user name for this
credential."
REFERENCE
"T. Wu, RFC 2945: The SRP Authentication and Key
Exchange System, September 2000"
::= { ipsAuthCredSrpAttributesEntry 1 }
ipsAuthCredSrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field allows entries to be dynamically added and
removed from this table via SNMP. When adding a row to
this table, all non-Index/RowStatus objects must be set.
Rows may be discarded using RowStatus."
::= { ipsAuthCredSrpAttributesEntry 2 }
ipsAuthCredSrpStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for all read-create objects in this row.
Rows in this table that were created through an external
process may have a storage type of readOnly or permanent."
DEFVAL { nonVolatile }
Bakke, Muchow Expires April 2006 [Page 24]
Internet Draft IPS Authorization MIB October 2005
::= { ipsAuthCredSrpAttributesEntry 3 }
ipsAuthCredKerberos OBJECT IDENTIFIER ::= { ipsAuthObjects 9 }
-- Credential Kerberos-Specific Attributes Table
ipsAuthCredKerbAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsAuthCredKerbAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Kerberos attributes for credentials that
use ipsAuthMethodKerberos as their ipsAuthCredAuthMethod."
::= { ipsAuthCredKerberos 1 }
ipsAuthCredKerbAttributesEntry OBJECT-TYPE
SYNTAX IpsAuthCredKerbAttributesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (row) containing management information
applicable to a credential which uses
ipsAuthMethodKerberos as its ipsAuthCredAuthMethod."
INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
::= { ipsAuthCredKerbAttributesTable 1 }
IpsAuthCredKerbAttributesEntry ::= SEQUENCE {
ipsAuthCredKerbPrincipal SnmpAdminString,
ipsAuthCredKerbRowStatus RowStatus,
ipsAuthCredKerbStorageType StorageType
}
ipsAuthCredKerbPrincipal OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A character string containing a Kerberos principal
for this credential."
REFERENCE
"J. Kohl, C. Neuman, RFC 1510: The Kerberos Network
Authentication Service (V5), September 1993"
::= { ipsAuthCredKerbAttributesEntry 1 }
ipsAuthCredKerbRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
Bakke, Muchow Expires April 2006 [Page 25]
Internet Draft IPS Authorization MIB October 2005
DESCRIPTION
"This field allows entries to be dynamically added and
removed from this table via SNMP. When adding a row to
this table, all non-Index/RowStatus objects must be set.
Rows may be discarded using RowStatus."
::= { ipsAuthCredKerbAttributesEntry 2 }
ipsAuthCredKerbStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for all read-create objects in this row.
Rows in this table that were created through an external
process may have a storage type of readOnly or permanent."
DEFVAL { nonVolatile }
::= { ipsAuthCredKerbAttributesEntry 3 }
--******************************************************************
-- Notifications
-- There are no notifications necessary in this MIB module.
--******************************************************************
-- Conformance Statements
ipsAuthCompliances OBJECT IDENTIFIER ::= { ipsAuthConformance 1 }
ipsAuthGroups OBJECT IDENTIFIER ::= { ipsAuthConformance 2 }
ipsAuthInstanceAttributesGroup OBJECT-GROUP
OBJECTS {
ipsAuthInstDescr,
ipsAuthInstStorageType
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
authorization instances."
::= { ipsAuthGroups 1 }
ipsAuthIdentAttributesGroup OBJECT-GROUP
OBJECTS {
ipsAuthIdentDescription,
ipsAuthIdentRowStatus,
ipsAuthIdentStorageType
}
STATUS current
Bakke, Muchow Expires April 2006 [Page 26]
Internet Draft IPS Authorization MIB October 2005
DESCRIPTION
"A collection of objects providing information about
user identities within an authorization instance."
::= { ipsAuthGroups 2 }
ipsAuthIdentNameAttributesGroup OBJECT-GROUP
OBJECTS {
ipsAuthIdentName,
ipsAuthIdentNameRowStatus,
ipsAuthIdentNameStorageType
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
user names within user identities within an authorization
instance."
::= { ipsAuthGroups 3 }
ipsAuthIdentAddrAttributesGroup OBJECT-GROUP
OBJECTS {
ipsAuthIdentAddrType,
ipsAuthIdentAddrStart,
ipsAuthIdentAddrEnd,
ipsAuthIdentAddrRowStatus,
ipsAuthIdentAddrStorageType
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
address ranges within user identities within an
authorization instance."
::= { ipsAuthGroups 4 }
ipsAuthIdentCredAttributesGroup OBJECT-GROUP
OBJECTS {
ipsAuthCredAuthMethod,
ipsAuthCredRowStatus,
ipsAuthCredStorageType
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
credentials within user identities within an authorization
instance."
::= { ipsAuthGroups 5 }
ipsAuthIdentChapAttrGroup OBJECT-GROUP
OBJECTS {
Bakke, Muchow Expires April 2006 [Page 27]
Internet Draft IPS Authorization MIB October 2005
ipsAuthCredChapUserName,
ipsAuthCredChapRowStatus,
ipsAuthCredChapStorageType
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
CHAP credentials within user identities within an
authorization instance."
::= { ipsAuthGroups 6 }
ipsAuthIdentSrpAttrGroup OBJECT-GROUP
OBJECTS {
ipsAuthCredSrpUserName,
ipsAuthCredSrpRowStatus,
ipsAuthCredSrpStorageType
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
SRP credentials within user identities within an
authorization instance."
::= { ipsAuthGroups 7 }
ipsAuthIdentKerberosAttrGroup OBJECT-GROUP
OBJECTS {
ipsAuthCredKerbPrincipal,
ipsAuthCredKerbRowStatus,
ipsAuthCredKerbStorageType
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
Kerberos credentials within user identities within an
authorization instance."
::= { ipsAuthGroups 8 }
--******************************************************************
ipsAuthComplianceV1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Initial version of compliance statement based on
initial version of this MIB module.
The Instance and Identity groups are mandatory;
at least one of the other groups (Name, Address,
Credential, Certificate) is also mandatory for
Bakke, Muchow Expires April 2006 [Page 28]
Internet Draft IPS Authorization MIB October 2005
any given implementation."
MODULE -- this module
MANDATORY-GROUPS {
ipsAuthInstanceAttributesGroup,
ipsAuthIdentAttributesGroup
}
-- Conditionally mandatory groups to be included with
-- the mandatory groups when necessary.
GROUP ipsAuthIdentNameAttributesGroup
DESCRIPTION
"This group is mandatory for all implementations
that make use of unique identity names."
GROUP ipsAuthIdentAddrAttributesGroup
DESCRIPTION
"This group is mandatory for all implementations
that use addresses to help verify identities."
GROUP ipsAuthIdentCredAttributesGroup
DESCRIPTION
"This group is mandatory for all implementations
that use credentials to help verify identities."
GROUP ipsAuthIdentChapAttrGroup
DESCRIPTION
"This group is mandatory for all implementations
that use CHAP to help verify identities.
The ipsAuthIdentCredAttributesGroup must be
implemented if this group is implemented."
GROUP ipsAuthIdentSrpAttrGroup
DESCRIPTION
"This group is mandatory for all implementations
that use SRP to help verify identities.
The ipsAuthIdentCredAttributesGroup must be
implemented if this group is implemented."
GROUP ipsAuthIdentKerberosAttrGroup
DESCRIPTION
"This group is mandatory for all implementations
that use Kerberos to help verify identities.
The ipsAuthIdentCredAttributesGroup must be
implemented if this group is implemented."
Bakke, Muchow Expires April 2006 [Page 29]
Internet Draft IPS Authorization MIB October 2005
OBJECT ipsAuthInstDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthInstStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthIdentDescription
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthIdentRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1)."
OBJECT ipsAuthIdentName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthIdentNameRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1)."
OBJECT ipsAuthIdentAddrType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthIdentAddrStart
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
Bakke, Muchow Expires April 2006 [Page 30]
Internet Draft IPS Authorization MIB October 2005
OBJECT ipsAuthIdentAddrEnd
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthIdentAddrRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1)."
OBJECT ipsAuthCredAuthMethod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthCredRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1)."
OBJECT ipsAuthCredChapUserName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthCredChapRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1)."
OBJECT ipsAuthCredSrpUserName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthCredSrpRowStatus
Bakke, Muchow Expires April 2006 [Page 31]
Internet Draft IPS Authorization MIB October 2005
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1)."
OBJECT ipsAuthCredKerbPrincipal
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipsAuthCredKerbRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1)."
::= { ipsAuthCompliances 1 }
END
Bakke, Muchow Expires April 2006 [Page 32]
Internet Draft IPS Authorization MIB October 2005
9. Security Considerations
There are a number of management objects defined in this MIB module
with a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations. These are the tables and objects and their
sensitivity/vulnerability:
All tables provide the ability to set up which credentials may be
used to access services on the managed system, to remove
legitimate credentials (a denial of service), or to remove
individual credentials to weaken the requirements for access of a
particular service. Write access must always be tightly
controlled. Note that some types of credentials, such as CHAP or
SRP, also require passwords or verifiers to be associated with the
credential. These are managed outside this MIB module.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability:
All tables provide the ability to find out which names, addresses,
and credentials would be required to access services on the
managed system. If these credentials are easily spoofed
(particularly the name or address), read access to this MIB module
must be tightly controlled.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module.
It is RECOMMENDED that implementors consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
Bakke, Muchow Expires April 2006 [Page 33]
Internet Draft IPS Authorization MIB October 2005
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
In many implementations, the objects in this MIB module can be read
and modified via other mechanisms or protocols in addition to this
MIB module. For the system to be secure, other mechanisms that can
read and modify the contents of this MIB module must also address the
above issues, and handle the threats outlined in [RFC3411], section
1.4.
10. IANA Considerations
10.1. OID Assignment
IANA is requested to make a MIB OID assignment under the mib-2
branch.
11. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J. ,
Rose, M., and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture
for Describing Simple Network Management Protocol (SNMP)
Management Frameworks", RFC 3411, December 2002.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
[IANA-AF] IANA, "IANA Address Family Numbers MIB",
http://www.iana.org/assignments/ianaaddressfamilynumbers-mib
[RFC2011] McCloghrie, K., "SNMPv2 Management Information Base for the
Internet Protocol using SMIv2", November 1996.
Bakke, Muchow Expires April 2006 [Page 34]
Internet Draft IPS Authorization MIB October 2005
[RFC2465] Haskin, D., and S. Onishi, "Management Information Base for
IP Version 6: Textual Conventions and General Group",
December 1998.
[RFC1994] Simpson, W., "PPP Challenge Handshake Authentication
Protocol (CHAP)", August 1996.
[RFC1510] Kohl, J., and C. Neuman, "The Kerberos Network
Authentication Service (V5)", September 1993.
[RFC2945] Wu, T., "The SRP Authentication and Key Exchange System",
September 2000.
12. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3414] Blumenthal, U., and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", RFC 3414, December 2002.
[RFC3720] Satran, J., Meth, K., Sapuntzakis, C., Chadalapaka, M., and
E. Zeidner, "Internet Small Computer Systems Interface
(iSCSI)", RFC 3720, March 2004.
[RFC1737] Sollins, K., and L. Masinter, "Functional Requirements for
Uniform Resource Names", RFC 1737, December 1994.
[RFC4044] McCloghrie, K., "Fibre Channel Management MIB", RFC 4044,
May 2005.
Acknowledgments
In addition to the authors, several people contributed to the
development of this MIB module through discussions of authentication,
authorization, and access within the iSCSI MIB module and security
teams, including John Hufferd, Marjorie Krueger, Keith McCloghrie,
Tom McSweeney, Steve Senum, and Josh Tseng. Thanks also to Bill
Studenmund (Wasabi Systems) for adding the Kerberos method, and to
Ayman Ghanem for finding and suggesting changes to several problems
found in the MIB module.
Thanks especially to Keith McCloghrie for serving as advisor for this
MIB module.
Bakke, Muchow Expires April 2006 [Page 35]
Internet Draft IPS Authorization MIB October 2005
Authors' Addresses
Mark Bakke
Postal: Cisco Systems, Inc
7900 International Drive, Suite 400
Bloomington, MN
USA 55425
Email: mbakke@cisco.com
James Muchow
Postal: Qlogic Corp.
6321 Bury Drive
Eden Prairie, MN
USA 55346
Email: james.muchow@qlogic.com
IPR Notice
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Full Copyright Notice
Copyright (C) The Internet Society (2005). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
Bakke, Muchow Expires April 2006 [Page 36]
Internet Draft IPS Authorization MIB October 2005
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Bakke, Muchow Expires April 2006 [Page 37]