Internet Engineering Task Force J. Parker,
Editor
INTERNET DRAFT Nexabit
Networks
Tue Jun 15
1999
Management Information Base for IS-IS
<draft-ietf-isis-wg-mib-02.txt>
1. Status of this Memo
This document is an Internet-Draft and is in full conformance
with all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet
Engineering Task Force (IETF), its areas, and its working
groups. Note that other groups may also distribute working
documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other
documents at any time. It is inappropriate to use Internet-
Drafts as reference material or to cite them other than as
"work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed
at http://www.ietf.org/shadow.html.
Copyright Notice
Copyright (C) The Internet Society (1997). All Rights
Reserved.
2. Abstract
This document describes a management information base for the
IS-IS Routing protocol, as described in ISO 10589 [2], when it
is used to construct routing tables for IP networks, as
described in RFC 1195 [3].
This memo defines an experimental portion of the Management
Information Base (MIB) for use with network management
protocols in the Internet community.
This memo is based on an IETF draft by Chris Gunner [1]. This
version has been modified to include MIB-II syntax, to exclude
portions of the protocol that are not relevant to IP, such as
the ES-IS protocol, and to add management support for current
practice.
- jparker
- nexabit.com
Internet Engineering Task Force J. Parker, Editor
INTERNET DRAFT Nexabit Networks
Tue Jun 15 1999
Management Information Base for IS-IS
<draft-ietf-isis-wg-mib-02.txt>
1. Status of this Memo
This document is an Internet-Draft and is in full conformance
with all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet
Engineering Task Force (IETF), its areas, and its working
groups. Note that other groups may also distribute working
documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other
documents at any time. It is inappropriate to use Internet-
Drafts as reference material or to cite them other than as
"work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed
at http://www.ietf.org/shadow.html.
Copyright Notice
Copyright (C) The Internet Society (1997). All Rights
Reserved.
INTERNET DRAFT IS-IS MIB June 1999
2. Abstract
This document describes a management information base for the
IS-IS Routing protocol, as described in ISO 10589 [2], when it
is used to construct routing tables for IP networks, as
described in RFC 1195 [3].
This memo defines an experimental portion of the Management
Information Base (MIB) for use with network management
protocols in the Internet community.
This memo is based on an IETF draft by Chris Gunner [1]. This
version has been modified to include MIB-II syntax, to exclude
portions of the protocol that are not relevant to IP, such as
the ES-IS protocol, and to add management support for current
practice.
Table of Contents
1. Status of this Memo.................................. 1
2. Abstract............................................. 2
3. Overview............................................. 3
4. Definition of IS-IS MIB.............................. 4
5. Acknowledgments...................................... 77
6. References........................................... 77
7. Security.Considerations.............................. 77
8. Authors'.Address..................................... 78
9. Full Copyright Statement............................. 79
Expires December 1999 [Page 2]
INTERNET DRAFT IS-IS MIB June 1999
3. Overview
This document is provided to the IETF working group on IS-IS.
The IS-IS MIB includes of the following objects
- isisSystem
This table contains information specific to a single
instance of the IS-IS protocol running on a router.
- isisL2SummAddr
This table holds summary addresses configured
for each Level 2 instance of the IS-IS protocol
running on a router.
- isisCirc
This table contains information specific to a
broadcast or point-to-point interface in the
system.
- isisISAdj
This table contains information about
adjacencies to routers maintained by the
protocol. Entries in this table cannot be
created by management action: they are
established through the Hello protocol.
- isisISAdjIPAddr
This table contains the set of IP Addresses of
neighboring Intermediate Systems as reported in
received IIH PDUs.
- isisReachAddr
This table contains information about an address
prefix manually configured on the system or
learned through another protocol.
- isisIPRATable
Expires December 1999 [Page 3]
INTERNET DRAFT IS-IS MIB June 1999
This table contains information about IP
reachable address manually configured on this
system or learned from another protocol.
- isisIPDestTable
The IP Destination Table records information
about each destination known to the Intermediate
System.
4. Definition of IS-IS MIB
-- This document defines an experimental portion of the MIB
-- containing objects for managing the operation of the IS-IS
-- protocol. The objects are mainly derived from the GDMO
-- definitions in ISO 10589.
--
-- The contents of the MIB are based on a draft revision of an IETF
-- MIB dated September 1992 and titled "Integrated IS-IS Management
-- Information Base".
--
-- Portions of the orignal MIB, such as objects for ES-IS exchange,
-- have not been included due to being inapplicable. Additionally,
-- corrections and enhancements have been included.
--
-- The names of some original items have been left in the text
-- as comments, as an indication of missing items. Many of these
-- are relevant to routing CLNS traffic
--
ISIS-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue,
TestAndIncr
FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE,
OBJECT-IDENTITY, Integer32, Counter32, IpAddress, TimeTicks
FROM SNMPv2-SMI;
Expires December 1999 [Page 4]
INTERNET DRAFT IS-IS MIB June 1999
isis MODULE-IDENTITY
LAST-UPDATED "9905181200Z" -- UTC date of the most recent
REVISION.
ORGANIZATION "Nexabit Networks, Inc."
CONTACT-INFO
"Jeff Parker
Nexabit Networks, LLC
200 Nickerson Rd.
Marlborough, MA 01752
jparker@nexabit.com"
DESCRIPTION
""
::= { experimental 37 }
-- OBJECT IDENTIFIER definitions
isisSystem OBJECT-IDENTITY
STATUS current
DESCRIPTION
""
::= { isis 1 }
isisCirc OBJECT-IDENTITY
STATUS current
DESCRIPTION
""
::= { isis 2 }
isisISAdj OBJECT-IDENTITY
STATUS current
DESCRIPTION
""
::= { isis 3 }
isisReachAddr OBJECT-IDENTITY
STATUS current
DESCRIPTION
""
::= { isis 4 }
isisIPReachAddr OBJECT-IDENTITY
STATUS current
DESCRIPTION
""
::= { isis 5 }
Expires December 1999 [Page 5]
INTERNET DRAFT IS-IS MIB June 1999
isisIPDest OBJECT-IDENTITY
STATUS current
DESCRIPTION
""
::= { isis 6 }
-- Type definitions
OSINSAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"OSI Network Service Address, e.g. NSAP, Network Entity Title"
SYNTAX OCTET STRING (SIZE(0..20))
SNPAAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A MAC Address or DTE Address or other SNPA Address."
SYNTAX OCTET STRING (SIZE(0..20))
NSAPPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"NSAP Prefix. The first octet of the string is used to
encode as an unsigned integer the length in bits of the
subsequent prefix. This length must be a multiple of 4
bits and may range from 0..160. The second and
subsequent octets are used to hold the prefix value.
If the last 4 bits of the last octet are not part of
the prefix then their value is undefined."
SYNTAX OCTET STRING (SIZE(1..21))
SNPAPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"SNPA Prefix. The first octet of the string is used to
encode as an unsigned integer the length in bits of the
subsequent prefix. The second and
subsequent octets are used to hold the prefix value.
Bits in the last octet which are not part of
the prefix have undefined value."
SYNTAX OCTET STRING (SIZE(1..21))
Expires December 1999 [Page 6]
INTERNET DRAFT IS-IS MIB June 1999
SystemID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A system ID."
SYNTAX OCTET STRING (SIZE(0..8))
OperState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type used in enabling and disabling a row."
SYNTAX INTEGER
{
off(1),
on(2)
}
LSPBuffSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Integer sub range for LSP size."
SYNTAX Integer32 (512..1492)
LevelState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"states of the ISIS protocol."
SYNTAX INTEGER
{
off (1),
on (2),
waiting (3)
}
SupportedProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Types of network protocol supported by Integrated ISIS.
The values for ISO8473 and IP are those registered for
these protocols in ISO TR9577."
SYNTAX INTEGER
{
iso8473(129),
ip(204),
Expires December 1999 [Page 7]
INTERNET DRAFT IS-IS MIB June 1999
ipV6(205)
}
DefaultMetric ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Integer sub-range for default metric for single hop."
SYNTAX Integer32 (1..63)
OtherMetric ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Integer sub-range for metrics other than the default
metric for single hop."
SYNTAX Integer32 (0..63)
MetricType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Class of metric at Level 2."
SYNTAX INTEGER
{
internal(1),
external(2)
}
CircuitID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ID for a circuit."
SYNTAX OCTET STRING (SIZE(2..9))
ISPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Integer sub-range for ISIS priority."
SYNTAX Integer32 (1..127)
TOS ::= INTEGER
{
default(1),
delay(2),
expense(3),
error(4)
Expires December 1999 [Page 8]
INTERNET DRAFT IS-IS MIB June 1999
}
-- Types Of Service (equivalent to Qualities Of Service)
-- which define types of metric.
PathCost ::= INTEGER (0..1023)
-- Integer sub-range for any metric for complete path.
-- Behaviour Definitions
-- ResettingTimer behaviour definition
-- "This object specifies the interval between certain events in
-- the operation of the protocol state machine. If the value of
-- this object is set to a new value while the protocol state
-- machine is in operation, the implementation shall take the
-- necessary steps to ensure that for any time interval which
-- was in progress when the value of the corresponding object
-- was changed, the next expiration of that interval takes place
-- the specified time after the original start of that interval,
-- or immediately, whichever is later. The precision with which
-- this time shall be implemented shall be the same as that
-- associated with the basic operation of the timer object."
-- OperationalState behaviour definition
-- "This object controls the enabling and disabling of the
-- corresponding table row. Setting this object to the value
-- off has the effect of disabling the corresponding row.
-- Setting this object to the value on has the effect of
-- enabling the corresponding row. Setting the value of this
-- object to the same value as its current value has no effect.
-- If the table entry also contains an object controlling the
-- row status then the object following the operationalState
-- behaviour shall not be set to on when the object following
-- the Row Status behaviour has value off. An attempt to do
-- so is rejected."
isisSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisSysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of instances of the Integrated IS-IS protocol
existing on the system."
::= { isisSystem 1 }
Expires December 1999 [Page 9]
INTERNET DRAFT IS-IS MIB June 1999
isisSysEntry OBJECT-TYPE
SYNTAX IsisSysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row defines information specific to a single
instance of the protocol existing on the system."
REFERENCE "{ISIS.poi cLNSISISBasic-P (1)}"
INDEX { isisSysInstance }
::= { isisSysTable 1 }
IsisSysEntry ::=
SEQUENCE {
isisSysInstance
Integer32,
isisSysVersion
DisplayString,
isisSysType
INTEGER,
isisSysID
SystemID,
isisSysMaxPathSplits
Integer32,
isisSysMaxLSPGenInt
Integer32,
isisSysOrigL1LSPBuffSize
LSPBuffSize,
isisSysMaxAreaAddresses
Integer32,
isisSysMinL1LSPGenInt -- Change - jdp
Integer32,
isisSysMinL2LSPGenInt -- Added - jdp
Integer32,
isisSysPollESHelloRate
Integer32,
isisSysWaitTime
Integer32,
isisSysOperState
OperState,
isisSysL1State
LevelState,
isisSysCorrLSPs
Counter32,
isisSysLSPL1DbaseOloads
Counter32,
Expires December 1999 [Page 10]
INTERNET DRAFT IS-IS MIB June 1999
isisSysManAddrDropFromAreas
Counter32,
isisSysAttmptToExMaxSeqNums
Counter32,
isisSysSeqNumSkips
Counter32,
isisSysOwnLSPPurges
Counter32,
isisSysIDFieldLenMismatches
Counter32,
isisSysMaxAreaAddrMismatches
Counter32,
isisSysOrigL2LSPBuffSize
LSPBuffSize,
isisSysL2State
LevelState,
isisSysLSPL2DbaseOloads
Counter32,
isisSysAuthAreaType
INTEGER,
isisSysAuthAreaTransPwd
OCTET STRING,
isisSysAuthDomainType
INTEGER,
isisSysAuthDomainTransPwd
OCTET STRING,
isisSysAuthFails
Counter32,
isisSysLSPIgnoreErrors
TruthValue,
isisSysLogAdjacencyChanges
TruthValue,
isisSysPartChanges
Counter32,
isisSysMaxAreaCheck
TruthValue,
isisSysNextCircIndex
TestAndIncr,
isisSysExistState
RowStatus
}
isisSysInstance OBJECT-TYPE
SYNTAX Integer32
Expires December 1999 [Page 11]
INTERNET DRAFT IS-IS MIB June 1999
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."
::= { isisSysEntry 1 }
isisSysVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the IS-IS protocol to which this
instance conforms. This value must be set by the
implementation when the row is valid."
REFERENCE "{ISIS.aoi version (1)}"
::= { isisSysEntry 2 }
isisSysType OBJECT-TYPE
SYNTAX INTEGER {
level1IS (1),
level2IS (2),
level1l2IS (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of this instance of the Integrated IS-IS
protocol. This object follows the
replaceOnlyWhileDisabled behaviour."
REFERENCE "{ISIS.aoi iSType (2)}"
::= { isisSysEntry 3 }
isisSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID for this instance of the Integrated IS-IS
protocol. This value is appended to each of the
instance's area addresses to form the Network Entity
Titles valid for this instance. The derivation of a value
for this object is implementation-specific. Some
implementations may assign values and not permit write
Expires December 1999 [Page 12]
INTERNET DRAFT IS-IS MIB June 1999
MAX-ACCESS, others may require the value to be set manually."
REFERENCE "{ISIS.aoi systemId (119)}"
::= { isisSysEntry 4 }
isisSysMaxPathSplits OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of paths with equal routing metric value
which it is permitted to split between. This object
follows the replaceOnlyWhileDisabled behaviour."
REFERENCE "{ISIS.aoi maximumPathSplits (3)}"
DEFVAL { 2 }
::= { isisSysEntry 5 }
isisSysMaxLSPGenInt OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum interval, in seconds, between generated LSPs
by this instance. This object follows the resettingTimer
behaviour."
REFERENCE "{ISIS.aoi maximumLSPGenerationInterval (6)}"
DEFVAL { 900 }
::= { isisSysEntry 6 }
isisSysOrigL1LSPBuffSize OBJECT-TYPE
SYNTAX LSPBuffSize
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum size of Level 1 LSPs and SNPs originated by
this instance. This object follows the
replaceOnlyWhileDisabled behaviour."
REFERENCE "{ISIS.aoi originatingL1LSPBufferSize (9)}"
DEFVAL { 1492 }
::= { isisSysEntry 7 }
isisSysMaxAreaAddresses OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Expires December 1999 [Page 13]
INTERNET DRAFT IS-IS MIB June 1999
"The maximum number of area addresses to be permitted for
the area in which this instance exists. Note that all
Intermediate Systems in the same area must have the same
value configured for this attribute if correct operation
is to be assumed. This object follows the
replaceOnlyWhileDisabled behaviour."
REFERENCE "{ISIS.aoi maximumAreaAddresses (4)}"
DEFVAL { 3 }
::= { isisSysEntry 8 }
isisSysMinL1LSPGenInt OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between successive
generation
of L1 LSPs with the same LSPID by this instance.
This object follows the resettingTimer behaviour."
REFERENCE "{ISIS.aoi minimumLSPGenerationInterval (11)}"
DEFVAL { 30 }
::= { isisSysEntry 9 }
isisSysMinL2LSPGenInt OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between successive
generation
of L2 LSPs with the same LSPID by this instance.
This object follows the resettingTimer behaviour."
REFERENCE "{ISIS.aoi minimumLSPGenerationInterval (11)}"
DEFVAL { 30 }
::= { isisSysEntry 10 }
isisSysPollESHelloRate OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, to be used for the suggested ES
configuration timer in ISH PDUs when soliciting the ES
configuration."
REFERENCE "{ISIS.aoi pollESHelloRate (13)}"
DEFVAL { 50 }
::= { isisSysEntry 11 }
Expires December 1999 [Page 14]
INTERNET DRAFT IS-IS MIB June 1999
isisSysWaitTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of seconds to delay in waiting state before
entering on state. This object follows the resettingTimer
behaviour."
REFERENCE "{ISIS.aoi waitingTime (15)}"
DEFVAL { 60 }
::= { isisSysEntry 12 }
isisSysOperState OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operational state of this instance of the Integrated
IS-IS protocol. Setting this object to the value on when
its current value is off enables operation of this
instance of the Integrated IS-IS protocol."
DEFVAL { off }
::= { isisSysEntry 13 }
isisSysL1State OBJECT-TYPE
SYNTAX LevelState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Level 1 database."
REFERENCE "{ISIS.aoi l1State (17)}"
::= { isisSysEntry 14 }
isisSysCorrLSPs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of corrupted LSPs detected."
REFERENCE "{ISIS.aoi corruptedLSPsDetected (19)}"
::= { isisSysEntry 15 }
isisSysLSPL1DbaseOloads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
Expires December 1999 [Page 15]
INTERNET DRAFT IS-IS MIB June 1999
STATUS current
DESCRIPTION
"Number of times the LSP L1 database has become
overloaded."
REFERENCE "{ISIS.aoi lSPL1DatabaseOverloads (20)}"
::= { isisSysEntry 16 }
isisSysManAddrDropFromAreas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a manual address has been dropped from
the area."
REFERENCE "{ISIS.aoi manualAddressesDroppedFromArea (21)}"
::= { isisSysEntry 17 }
isisSysAttmptToExMaxSeqNums OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the IS has attempted to exceed the
maximum sequence number."
REFERENCE "{ISIS.aoi
attemptsToExceedmaximumSequenceNumber (22)}"
::= { isisSysEntry 18 }
isisSysSeqNumSkips OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a sequence number skip has occurred."
REFERENCE "{ISIS.aoi sequenceNumberSkips (23)}"
::= { isisSysEntry 19 }
isisSysOwnLSPPurges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a zero-aged copy of the system's own LSP
is received from some other node."
REFERENCE "{ISIS.aoi ownLSPPurges (24)}"
Expires December 1999 [Page 16]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisSysEntry 20 }
isisSysIDFieldLenMismatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a PDU is received with a different value
for ID field length to that of the receiving system."
REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}"
::= { isisSysEntry 21 }
isisSysMaxAreaAddrMismatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a PDU is received with a different value
for MaximumAreaAddresses from that of the receiving
system."
REFERENCE "{ISIS.aoi MaximumAreaAddressesMismatches (118)}"
::= { isisSysEntry 22 }
-- The following objects map those from the cLNSISISLevel2-P
-- Package
isisSysOrigL2LSPBuffSize OBJECT-TYPE
SYNTAX LSPBuffSize
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum size of Level 2 LSPs and SNPs originated by
this system. This object follows the
replaceOnlyWhileDisabled behaviour."
REFERENCE "{ISIS.aoi originatingL2LSPBufferSize (26)}"
DEFVAL { 1492 }
::= { isisSysEntry 23 }
isisSysL2State OBJECT-TYPE
SYNTAX LevelState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Level 2 database."
REFERENCE "{ISIS.aoi l2State (28)}"
Expires December 1999 [Page 17]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisSysEntry 24 }
isisSysLSPL2DbaseOloads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the Level 2 LSP database has become
overloaded."
REFERENCE "{ISIS.aoi lSPL2DatabaseOverloads (32)}"
::= { isisSysEntry 25 }
isisSysAuthAreaType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
plaintext(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What authentication scheme, if any, is used to protect
Level 1 Link State packets?"
DEFVAL { none }
::= { isisSysEntry 26 }
isisSysAuthAreaTransPwd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key in
Level 1 Link State Packets whenever the value of
isisSysAuthAreaType has a value of plaintext.
A modification of isisSysAuthAreaType does not
modify the isisSysAuthAreaTransPwd value.
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."
DEFVAL { "" }
::= { isisSysEntry 27 }
isisSysAuthDomainType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
Expires December 1999 [Page 18]
INTERNET DRAFT IS-IS MIB June 1999
plaintext(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What authentication scheme, if any, is used to protect
Level 2 Link State packets?"
DEFVAL { none }
::= { isisSysEntry 28 }
isisSysAuthDomainTransPwd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key in
Level 2 Link State Packets whenever the value of
isisSysAuthDomainType has a value of plaintext.
A modification of isisSysAuthDomainType does not
modify the isisSysAuthDomainTransPwd value.
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."
DEFVAL { "" }
::= { isisSysEntry 29 }
isisSysAuthFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication failures recognized by this
instance of the protocol."
::= { isisSysEntry 30 }
isisSysLSPIgnoreErrors OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, allow the router to ignore IS-IS link state
packets
(LSPs) that are received with internal checksum errors
rather
than purging the LSPs."
DEFVAL { false }
Expires December 1999 [Page 19]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisSysEntry 31 }
isisSysLogAdjacencyChanges OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, causes IS-IS to generate a log message when an
IS-IS adjacency changes state (up or down)."
DEFVAL { false }
::= { isisSysEntry 32 }
isisSysPartChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"partition changes"
::= { isisSysEntry 33 }
isisSysMaxAreaCheck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, enables checking of maximum area
addresses per IS version of ISO10589."
DEFVAL { true }
::= { isisSysEntry 34 }
isisSysNextCircIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to assign values to
isisCircIndex as described in 'Textual
Conventions for SNMPv2'. The network manager
reads this object, and then writes the value
back in a SET that creates a new instance of
isisCircEntry. If the SET fails with the
code 'inconsistentValue', then the process must
be repeated; If the SET succeeds, then the ob-
ject is incremented, and the new instance is
created according to the manager's directions."
Expires December 1999 [Page 20]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisSysEntry 35 }
isisSysExistState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the ISIS router. Turning this off
forces the router to forget all current state"
DEFVAL { active }
::= { isisSysEntry 36 }
-- The Level 1 Manual Area Address Table
-- contains the set of area addresses manually configured
-- for each instance of the Integrated IS-IS protocol.
-- At least one row in which the value of
-- isisManAreaAddrExistState
-- is on must be present for each instance of the protocol
-- when isisSysOperState is also on for that instance. The
-- maximum number of rows in this table for each instance of
-- the protocol for which the object isisManAreaAddrExistState
-- has the value on is the value of maximumAreaAddresses (as
-- defined in ISO 10589) for that instance. An Attempt
-- to create a new row such that the number of rows with
-- isisManAreaAddrExistState set to on for that protocol
-- instance exceeds maximumAreaAddresses is rejected."
isisManAreaAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisManAreaAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of manual area addresses configured on this
Intermediate System."
REFERENCE "{ISIS.aoi manualAreaAddresses (10)}"
::= { isisSystem 2 }
isisManAreaAddrEntry OBJECT-TYPE
SYNTAX IsisManAreaAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one area address manually configured
on this system"
INDEX { isisManAreaAddrSysInstance,
Expires December 1999 [Page 21]
INTERNET DRAFT IS-IS MIB June 1999
isisManAreaAddr }
::= { isisManAreaAddrTable 1 }
IsisManAreaAddrEntry ::=
SEQUENCE {
isisManAreaAddrSysInstance
Integer32,
isisManAreaAddr
OSINSAddress,
isisManAreaAddrExistState
RowStatus
}
isisManAreaAddrSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."
::= { isisManAreaAddrEntry 1 }
isisManAreaAddr OBJECT-TYPE
SYNTAX OSINSAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A manually configured area address for this system. This
object follows the index behaviour.
Note: an index for the entry {1, {49.0001} active} in
this table would be the ordered pair
(1, (0x03 0x49 0x00 0x01)), as the length of an Octet
string is part of the OID."
::= { isisManAreaAddrEntry 2 }
isisManAreaAddrExistState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the isisManAreaAddrEntry. This object
follows the Row Status behaviour. If an attempt is
made to set this object to the value off when the
Expires December 1999 [Page 22]
INTERNET DRAFT IS-IS MIB June 1999
corresponding isisManAreaAddrEntry is the only valid
entry for this instance and when the corresponding ISIS
instance has isisSysOperState set to On then the attempt
is rejected."
DEFVAL { active }
::= { isisManAreaAddrEntry 3 }
-- The Level 1 Area Address Table
-- The Level 1 Area Address Table contains the
-- union of the sets of area addresses reported in all Level 1
-- LSPs received by this Intermediate System.
isisAreaAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisAreaAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The union of the sets of area addresses reported in all
Level 1 LSPs received by this instance of the protocol."
REFERENCE "{ISIS.aoi areaAddresses (18)}"
::= { isisSystem 3 }
isisAreaAddrEntry OBJECT-TYPE
SYNTAX IsisAreaAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one area address reported in a
Level 1 LSP received by this instance of the protocol."
INDEX { isisAreaAddrSysInstance,
isisAreaAddr }
::= { isisAreaAddrTable 1 }
IsisAreaAddrEntry ::=
SEQUENCE {
isisAreaAddrSysInstance
Integer32,
isisAreaAddr
OSINSAddress
}
isisAreaAddrSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
Expires December 1999 [Page 23]
INTERNET DRAFT IS-IS MIB June 1999
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds."
::= { isisAreaAddrEntry 1 }
isisAreaAddr OBJECT-TYPE
SYNTAX OSINSAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An area address reported in a Level 1 LSP received by
this instance of the protocol."
::= { isisAreaAddrEntry 2 }
-- The System Integrated Group
-- The System Integrated Group is present if the system
-- supports Integrated ISIS at Level 1.
-- The System Protocol Supported Table
-- The System Protocol Supported Table contains the manually
-- configured set of protocols supported by each
-- instance of the Integrated ISIS protocol.
--
isisSysProtSuppTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisSysProtSuppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the manually configured set of
protocols supported by each instance of the Integrated
ISIS protocol."
::= { isisSystem 4 }
isisSysProtSuppEntry OBJECT-TYPE
SYNTAX IsisSysProtSuppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one protocol supported by an
instance of the Integrated ISIS protocol."
Expires December 1999 [Page 24]
INTERNET DRAFT IS-IS MIB June 1999
INDEX { isisSysProtSuppSysInstance,
isisSysProtSuppProtocol }
::= { isisSysProtSuppTable 1 }
IsisSysProtSuppEntry ::=
SEQUENCE {
isisSysProtSuppSysInstance
Integer32,
isisSysProtSuppProtocol
SupportedProtocol,
isisSysProtSuppExistState
RowStatus
}
isisSysProtSuppSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."
::= { isisSysProtSuppEntry 1 }
isisSysProtSuppProtocol OBJECT-TYPE
SYNTAX SupportedProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One supported protocol. This object follows the index
behaviour."
::= { isisSysProtSuppEntry 2 }
isisSysProtSuppExistState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the isisSysProtSuppEntry. This object
follows the RowStatus behavior."
DEFVAL { active }
::= { isisSysProtSuppEntry 3 }
Expires December 1999 [Page 25]
INTERNET DRAFT IS-IS MIB June 1999
-- The Level 2 IP Group
-- The Level 2 IP Group is present if the system
-- supports IP Integrated IS-IS at Level 2
-- The Level 2 Summary Address Table
-- The Level 2 Summary Address Table contains the set of summary
-- addresses manually configured for each Level 2 instance of
-- IP Integrated ISIS on the system.
isisL2SummAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisL2SummAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of IP summary addresses to use in forming the
contents of Level 2 LSPs originated by this level 2
Intermediate System."
::= { isisSystem 5 }
isisL2SummAddrEntry OBJECT-TYPE
SYNTAX IsisL2SummAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one IP summary address."
INDEX { isisL2SummAddrSysInstance,
isisL2SummAddress,
isisL2SummAddrMask }
::= { isisL2SummAddrTable 1 }
IsisL2SummAddrEntry ::=
SEQUENCE {
isisL2SummAddrSysInstance
Integer32,
isisL2SummAddress
IpAddress,
isisL2SummAddrMask
IpAddress,
isisL2SummAddrExistState
RowStatus,
isisL2SummAddrOperState
OperState,
Expires December 1999 [Page 26]
INTERNET DRAFT IS-IS MIB June 1999
isisL2SummAddrDefaultMetric
DefaultMetric,
isisL2SummAddrDelayMetric
OtherMetric,
isisL2SummAddrExpenseMetric
OtherMetric,
isisL2SummAddrErrorMetric
OtherMetric
}
isisL2SummAddrSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviours."
::= { isisL2SummAddrEntry 1 }
isisL2SummAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address value for this summary address. This
object follows the index behaviour."
::= { isisL2SummAddrEntry 2 }
isisL2SummAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask value for this summary address. This object
follows the index behaviour."
::= { isisL2SummAddrEntry 3 }
isisL2SummAddrExistState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The existence state of this summary address. This object
follows the row status behaviour."
Expires December 1999 [Page 27]
INTERNET DRAFT IS-IS MIB June 1999
DEFVAL { active }
::= { isisL2SummAddrEntry 4 }
isisL2SummAddrOperState OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operational state of this entry. This object follows
the operationalState behaviour. When the operational
state changes if this would cause the contents of Level 2
LSPs originated by the system to change then those new
LSPs must be generated and sent as soon as is permitted
by the ISIS protocol."
DEFVAL { off }
::= { isisL2SummAddrEntry 5 }
isisL2SummAddrDefaultMetric OBJECT-TYPE
SYNTAX DefaultMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default metric value to announce this summary
address with in Level 2 LSPs generated by this system."
DEFVAL { 20 }
::= { isisL2SummAddrEntry 6 }
isisL2SummAddrDelayMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The delay metric value to announce this summary address
with in Level 2 LSPs generated by this system. The value
of zero is reserved to indicate that this metric is not
supported."
DEFVAL { 0 }
::= { isisL2SummAddrEntry 7 }
isisL2SummAddrExpenseMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The expense metric value to announce this summary
Expires December 1999 [Page 28]
INTERNET DRAFT IS-IS MIB June 1999
address with in Level 2 LSPs generated by this system.
The value of zero is reserved to indicate that this
metric is not supported."
DEFVAL { 0 }
::= { isisL2SummAddrEntry 8 }
isisL2SummAddrErrorMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The error metric value to announce this summary address
with in Level 2 LSPs generated by this system. The value
of zero is reserved to indicate that this metric is not
supported."
DEFVAL { 0 }
::= { isisL2SummAddrEntry 9 }
-- The Circuit Group
-- The Circuit Group is current
-- The Circuit Table
-- Each broadcast or point-to-point interface on the system
-- corresponds to one entry in the Circuit table. There may be
-- many X.25 DA circuit entries in the Circuit table for an
-- X.25 interface.
isisCircTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisCircEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of circuits used by each instance of
Integrated IS-IS on this system."
::= { isisCirc 1 }
isisCircEntry OBJECT-TYPE
SYNTAX IsisCircEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An isisCircEntry exists for each circuit used by
Integrated IS-IS on this system."
INDEX { isisCircSysInstance,
Expires December 1999 [Page 29]
INTERNET DRAFT IS-IS MIB June 1999
isisCircIndex }
::= { isisCircTable 1 }
IsisCircEntry ::=
SEQUENCE {
isisCircSysInstance
Integer32,
isisCircIndex
Integer32,
isisCircIfIndex
Integer32,
isisCircIfSubIndex
Integer32,
isisCircLocalID
Integer32,
isisCircOperState
OperState,
isisCircExistState
RowStatus,
isisCircType
INTEGER,
isisCircL1DefaultMetric
DefaultMetric,
isisCircL1DelayMetric
OtherMetric,
isisCircL1ExpenseMetric
OtherMetric,
isisCircL1ErrorMetric
OtherMetric,
isisCircExtDomain
TruthValue,
isisCircAdjChanges
Counter32,
isisCircInitFails
Counter32,
isisCircRejAdjs
Counter32,
isisCircOutCtrlPDUs
Counter32,
isisCircInCtrlPDUs
Counter32,
isisCircIDFieldLenMismatches
Counter32,
isisCircL2DefaultMetric
DefaultMetric,
Expires December 1999 [Page 30]
INTERNET DRAFT IS-IS MIB June 1999
isisCircL2DelayMetric
OtherMetric,
isisCircL2ExpenseMetric
OtherMetric,
isisCircL2ErrorMetric
OtherMetric,
isisCircManL2Only
TruthValue,
isisCircL1ISPriority
ISPriority,
isisCircL1CircID
CircuitID,
isisCircL1DesIS
SystemID,
isisCircLANL1DesISChanges
Counter32,
isisCircL2ISPriority
ISPriority,
isisCircL2CircID
CircuitID,
isisCircL2DesIS
SystemID,
isisCircLANL2DesISChanges
Counter32,
isisCircMCAddr
INTEGER,
isisCircPtToPtCircID
CircuitID,
isisCircL1HelloTimer
Integer32,
isisCircL2HelloTimer
Integer32,
isisCircL1HelloMultiplier
Integer32,
isisCircL2HelloMultiplier
Integer32,
isisCircDRL1HelloTimer
Integer32,
isisCircDRL2HelloTimer
Integer32,
isisCircMinBroadLSPTransInt
Integer32,
isisCircL1MinLSPTransInt
Integer32,
isisCircL2MinLSPTransInt
Expires December 1999 [Page 31]
INTERNET DRAFT IS-IS MIB June 1999
Integer32,
isisCircL1CSNPInterval
Integer32,
isisCircL2CSNPInterval
Integer32,
isisCircL1PartSNPInterval
Integer32,
isisCircL2PartSNPInterval
Integer32,
isisCircLSPThrottle
Integer32,
isisCircPassiveCircuit
TruthValue,
isisCircMeshGroupEnabled
INTEGER,
isisCircMeshGroup
Integer32,
isisCircL1AuthType
INTEGER,
isisCircL1Password
OCTET STRING,
isisCircL2AuthType
INTEGER,
isisCircL2Password
OCTET STRING,
isisCircSmallHellos
OperState,
isisManAdjNeighNSAP
OSINSAddress,
isisManAdjNeighSNPA
SNPAAddress,
isisCircIPEncaps
TruthValue,
isisCircUpTime
Integer32
}
isisCircSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."
Expires December 1999 [Page 32]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisCircEntry 1 }
isisCircIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of this circuit, unique within the
instance of the protocol. This object follows the index
behaviour. This is for SNMP Indexing purposes only
and has no relation to any protocol value."
::= { isisCircEntry 2 }
isisCircIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface to which this
circuit corresponds. This object cannot be modified
after creation"
::= { isisCircEntry 3 }
isisCircIfSubIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A specifier for the part of the interface ifIndex to which
this circuit corresponds, such as a DLCI or VPI/VCI.
This object cannot be modified after creation"
::= { isisCircEntry 4 }
isisCircLocalID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An identification that can be used in protocol packets
to identify a circuit. Implementations may devise ways
to assure that this value is suitable for the circuit
it is used on. LAN packets only have space for 8 bits.
Values of isisCircLocalID do not need to be unique. They
are only required to differ on LANs where the Intermediate
Expires December 1999 [Page 33]
INTERNET DRAFT IS-IS MIB June 1999
System is the Designated Intermediate System."
::= { isisCircEntry 5 }
isisCircOperState OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operational state of the circuit. This object
follows the operationalState behaviour."
DEFVAL { off }
::= { isisCircEntry 6 }
isisCircExistState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The existence state of this circuit. This object follows
the Row Status behaviour."
DEFVAL { active }
::= { isisCircEntry 7 }
isisCircType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
ptToPt(2),
staticIn(3),
staticOut(4),
dA(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the circuit. This object follows the
replaceOnlyWhileDisabled behaviour. The type specified
must be compatible with the type of the interface defined
by the value of isisCircIfIndex."
REFERENCE "{ISIS.aoi type (33)}"
::= { isisCircEntry 8 }
isisCircL1DefaultMetric OBJECT-TYPE
SYNTAX DefaultMetric
MAX-ACCESS read-write
STATUS current
Expires December 1999 [Page 34]
INTERNET DRAFT IS-IS MIB June 1999
DESCRIPTION
"The default metric value of this circuit for Level 1
traffic."
REFERENCE "{ISIS.aoi l1DefaultMetric (35)}"
DEFVAL { 20 }
::= { isisCircEntry 9 }
isisCircL1DelayMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delay metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported."
REFERENCE "{ISIS.aoi l1DelayMetric (36)}"
DEFVAL { 0 }
::= { isisCircEntry 10 }
isisCircL1ExpenseMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The expense metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported."
REFERENCE "{ISIS.aoi l1ExpenseMetric (37)}"
DEFVAL { 0 }
::= { isisCircEntry 11 }
isisCircL1ErrorMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The error metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported."
REFERENCE "{ISIS.aoi l1ErrorMetric (38)}"
DEFVAL { 0 }
::= { isisCircEntry 12 }
isisCircExtDomain OBJECT-TYPE
SYNTAX TruthValue
Expires December 1999 [Page 35]
INTERNET DRAFT IS-IS MIB June 1999
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, suppress normal transmission of and
interpretation of Intra-domain ISIS PDUs on this
circuit."
REFERENCE "{ISIS.aoi externalDomain (46)}"
DEFVAL { false }
::= { isisCircEntry 13 }
isisCircAdjChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an adjacency state change has
occurred on this circuit."
REFERENCE "{ISIS.aoi changesInAdjacencyState (40)}"
::= { isisCircEntry 14 }
isisCircInitFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times initialization of this circuit has
failed."
REFERENCE "{ISIS.aoi initializationFailures (41)}"
::= { isisCircEntry 15 }
isisCircRejAdjs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an adjacency has been rejected on
this circuit."
REFERENCE "{ISIS.aoi rejectedAdjacencies (42)}"
::= { isisCircEntry 16 }
isisCircOutCtrlPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Expires December 1999 [Page 36]
INTERNET DRAFT IS-IS MIB June 1999
"The number of IS-IS control PDUs sent on this circuit."
REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
::= { isisCircEntry 17 }
isisCircInCtrlPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IS-IS control PDUs received on this
circuit."
REFERENCE "{ISIS.aoi controlPDUsReceived (44)}"
::= { isisCircEntry 18 }
isisCircIDFieldLenMismatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an IS-IS control PDU with an ID
field length different to that for this system has been
received."
REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}"
::= { isisCircEntry 19 }
-- The following objects map those from the linkageISISLevel2-P
-- package
isisCircL2DefaultMetric OBJECT-TYPE
SYNTAX DefaultMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default metric value of this circuit for level 2
traffic."
REFERENCE "{ISIS.aoi l2DefaultMetric (68)}"
DEFVAL { 20 }
::= { isisCircEntry 20 }
isisCircL2DelayMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delay metric value of this circuit for level 2
Expires December 1999 [Page 37]
INTERNET DRAFT IS-IS MIB June 1999
traffic. The value of zero is reserved to indicate that
this metric is not supported."
REFERENCE "{ISIS.aoi l2DelayMetric (69)}"
DEFVAL { 0 }
::= { isisCircEntry 21 }
isisCircL2ExpenseMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The expense metric value of this circuit for level 2
traffic. The value of zero is reserved to indicate that
this metric is not supported."
REFERENCE "{ISIS.aoi l2ExpenseMetric (70)}"
DEFVAL { 0 }
::= { isisCircEntry 22 }
isisCircL2ErrorMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The error metric value of this circuit for level 2
traffic. The value of zero is reserved to indicate that
this metric is not supported."
REFERENCE "{ISIS.aoi l2ErrorMetric (71)}"
DEFVAL { 0 }
::= { isisCircEntry 23 }
isisCircManL2Only OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, indicates that this circuit is to be used
only for level 2. This object follows the
replaceOnlyWhileDisabled behaviour."
REFERENCE "{ISIS.aoi manualL2OnlyMode (72)}"
DEFVAL { false }
::= { isisCircEntry 24 }
-- The following objects map those from the
-- linkageISISBroadcast-P package
Expires December 1999 [Page 38]
INTERNET DRAFT IS-IS MIB June 1999
isisCircL1ISPriority OBJECT-TYPE
SYNTAX ISPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority for becoming LAN Level 1 Deignated
Intermediate System on a broadcast circuit."
REFERENCE "{ISIS.aoi l1IntermediateSystemPriority (47)}"
DEFVAL { 64 }
::= { isisCircEntry 25 }
isisCircL1CircID OBJECT-TYPE
SYNTAX CircuitID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN ID allocated by the LAN Level 1 Designated
Intermediate System. Where this system is not aware of
the value (because it is not participating in the Level 1
Designated Intermediate System election), this object has
the value which would be proposed for this circuit (i.e.
the concatenation of the local system ID and the one
octet local Circuit ID for this circuit."
REFERENCE "{ISIS.aoi l1CircuitID (48)}"
::= { isisCircEntry 26 }
isisCircL1DesIS OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the LAN Level 1 Designated Intermediate System
on this circuit. If, for any reason this system is not
partaking in the relevant Designated Intermediate System
election process, then the value returned is the zero
length OCTET STRING."
REFERENCE "{ISIS.aoi l1DesignatedIntermediateSystem (49)}"
::= { isisCircEntry 27 }
isisCircLANL1DesISChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the LAN Level 1 Designated
Expires December 1999 [Page 39]
INTERNET DRAFT IS-IS MIB June 1999
Intermediate System has changed."
REFERENCE "{ISIS.aoi
lanL1DesignatedIntermediateSystemChanges (50)}"
::= { isisCircEntry 28 }
-- The following objects map those from the
-- linkageISISLevel2Broadcast-P package
isisCircL2ISPriority OBJECT-TYPE
SYNTAX ISPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority for becoming LAN level 2 Designated
Intermediate System."
REFERENCE "{ISIS.aoi l2IntermediateSystemPriority (73)}"
DEFVAL { 64 }
::= { isisCircEntry 29 }
isisCircL2CircID OBJECT-TYPE
SYNTAX CircuitID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN ID allocated by the LAN Level 2 Designated
Intermediate System. Where this system is not aware of
this value (because it is not participating in the Level
2 Designated Intermediate System election), this object
has the value which would be proposed for this circuit
(i.e. the concatenation of the local system ID and the
one octet local Circuit ID for this circuit."
REFERENCE "{ISIS.aoi l2CircuitID (74)}"
::= { isisCircEntry 30 }
isisCircL2DesIS OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the LAN Level 2 Designated Intermediate System
on this circuit. If, for any reason, this system is not
partaking in the relevant Designated Intermediate System
election process, then the value returned is the zero
length OCTET STRING."
REFERENCE "{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
Expires December 1999 [Page 40]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisCircEntry 31 }
isisCircLANL2DesISChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the LAN Level 2 Designated
Intermediate System has changed."
REFERENCE "{ISIS.aoi
lanL2DesignatedIntermediateSystemChanges (76)}"
::= { isisCircEntry 32 }
isisCircMCAddr OBJECT-TYPE
SYNTAX INTEGER{
group (1),
functional (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies which type of multicast address will
be used for sending HELLO PDUs on this
circuit."
DEFVAL { group }
::= { isisCircEntry 33 }
isisCircPtToPtCircID OBJECT-TYPE
SYNTAX CircuitID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the circuit allocated during initialization.
If no value has been negotiated (either because the
adjacency is to an End System, or because initialization
has not yet successfully completed), this object has the
value which would be proposed for this circuit (i.e. the
concatenation of the local system ID and the one octet
local Circuit ID for this circuit."
REFERENCE "{ISIS.aoi ptPtCircuitID (51)}"
::= { isisCircEntry 34 }
isisCircL1HelloTimer OBJECT-TYPE
Expires December 1999 [Page 41]
INTERNET DRAFT IS-IS MIB June 1999
SYNTAX Integer32 (10..600000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum period, in milliseconds, between Level 1
IIH PDUs on multiaccess networks. It is also used
as the period between Hellos on point to point circuits.
This object follows the resettingTimer behaviour."
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
DEFVAL { 3000 }
::= { isisCircEntry 35 }
isisCircL2HelloTimer OBJECT-TYPE
SYNTAX Integer32 (10..600000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum period, in milliseconds, between Level 1
IIH PDUs on multiaccess networks. This object
follows the resettingTimer behaviour."
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
DEFVAL { 3000 }
::= { isisCircEntry 36 }
isisCircL1HelloMultiplier OBJECT-TYPE
SYNTAX Integer32 (2..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is multiplied by the corresponding HelloTimer
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by receivers
of hello packets from this IS"
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
DEFVAL { 10 }
::= { isisCircEntry 37 }
isisCircL2HelloMultiplier OBJECT-TYPE
SYNTAX Integer32 (2..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is multiplied by the corresponding HelloTimer
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by receivers
Expires December 1999 [Page 42]
INTERNET DRAFT IS-IS MIB June 1999
of hello packets from this IS"
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
DEFVAL { 10 }
::= { isisCircEntry 38 }
isisCircDRL1HelloTimer OBJECT-TYPE
SYNTAX Integer32 (10..120000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Period, in milliseconds, between Level 1 PDUs on
multiaccess networks when this IS is the Designated
Intermediate System. This object follows the
resettingTimer behaviour."
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
DEFVAL { 1000 }
::= { isisCircEntry 39 }
isisCircDRL2HelloTimer OBJECT-TYPE
SYNTAX Integer32 (10..120000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Period, in milliseconds, between Level 2 PDUs on
multiaccess networks when this IS is the Designated
Intermediate System. This object follows the
resettingTimer behaviour."
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
DEFVAL { 1000 }
::= { isisCircEntry 40 }
isisCircMinBroadLSPTransInt OBJECT-TYPE
SYNTAX Integer32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in milliseconds, between transmission
of LSPs on a broadcast circuit. This object follows the
resettingTimer behaviour. This timer shall be capable of
a resolution not coarser than 10 milliseconds."
REFERENCE "{ISIS.aoi minimumBroadcastLSPTransmissionInterval
(7)}"
DEFVAL { 33 }
::= { isisCircEntry 41 }
isisCircL1MinLSPTransInt OBJECT-TYPE
Expires December 1999 [Page 43]
INTERNET DRAFT IS-IS MIB June 1999
SYNTAX Integer32 (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between re-transmission of
an Level 1 LSP. This object follows the resettingTimer
behaviour."
REFERENCE "{ISIS.aoi minimumLSPTransmissionInterval (5)}"
DEFVAL { 5 }
::= { isisCircEntry 42 }
isisCircL2MinLSPTransInt OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between re-transmission of
an Level 2 LSP. This object follows the resettingTimer
behaviour."
REFERENCE "{ISIS.aoi minimumLSPTransmissionInterval (5)}"
DEFVAL { 5 }
::= { isisCircEntry 43 }
isisCircL1CSNPInterval OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of time, in seconds, between transmission
of Level 1 CSNPs on multiaccess networks if this
router is the designated router."
REFERENCE "{}"
DEFVAL { 10 }
::= { isisCircEntry 44 }
isisCircL2CSNPInterval OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of time, in seconds, between transmission
of Level 2 CSNPs on multiaccess networks if this
router is the designated router."
REFERENCE "{}"
DEFVAL { 10 }
Expires December 1999 [Page 44]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisCircEntry 45 }
isisCircL1PartSNPInterval OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval between sending Level 1 Partial Sequence
Number PDUs. This object follows the resettingTimer
behaviour."
REFERENCE "{ISIS.aoi partialSNPInterval (14)}"
DEFVAL { 2 }
::= { isisCircEntry 46 }
isisCircL2PartSNPInterval OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval between sending Level 2 Partial Sequence
Number PDUs. This object follows the resettingTimer
behaviour."
REFERENCE "{ISIS.aoi partialSNPInterval (14)}"
DEFVAL { 2 }
::= { isisCircEntry 47 }
isisCircLSPThrottle OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimal interval of time, in milliseconds, between
transmissions of LSPs on a point to point interface."
REFERENCE "{}"
DEFVAL { 10 }
::= { isisCircEntry 48 }
isisCircPassiveCircuit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Should we include this interface in LSPs, even if
it is not running the ISIS Protocol?"
REFERENCE "{}"
DEFVAL { false }
::= { isisCircEntry 49 }
Expires December 1999 [Page 45]
INTERNET DRAFT IS-IS MIB June 1999
isisCircMeshGroupEnabled OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
blocked(2),
set(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this port a member of a mesh group, or blocked?
Circuits in the same mesh group act as a virtual
multiaccess network. LSPs seen on one circuit in
a mesh group will not be flooded to another circuit
in the same mesh group."
REFERENCE "{}"
DEFVAL { inactive }
::= { isisCircEntry 50 }
isisCircMeshGroup OBJECT-TYPE
SYNTAX Integer32 (1..2000000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Circuits in the same mesh group act as a virtual
multiaccess network. LSPs seen on one circuit in
a mesh group will not be flooded to another circuit
in the same mesh group. If isisCircMeshGroupEnabled
is false, this value is ignored."
REFERENCE "{}"
DEFVAL { 1 }
::= { isisCircEntry 51 }
isisCircL1AuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
plaintext(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What authentication scheme, if any, is used to protect
Level 1 and Point-to-Point hello packets?"
REFERENCE "{}"
DEFVAL { none }
::= { isisCircEntry 52 }
Expires December 1999 [Page 46]
INTERNET DRAFT IS-IS MIB June 1999
isisCircL1Password OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key in Level 1
and Point-to-Point hello packets whenever the corresponding
instance of isisCircL1AuthType has a value of plaintext.
A modification of the corresponding instance of
isisCircL1AuthType does not modify the isisCircL1Password
value.
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."
REFERENCE "{}"
DEFVAL { ''H }
::= { isisCircEntry 53 }
isisCircL2AuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
plaintext(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What authentication scheme, if any, is used to protect
Level 2 hello packets?"
REFERENCE "{}"
DEFVAL { none }
::= { isisCircEntry 54 }
isisCircL2Password OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key in Level 1
Hello packets whenever the corresponding instance of
isisCircL1AuthType has a value of plaintext. A
modification of the corresponding instance of
isisCircL1AuthType does not modify the
isisCircL1Password value.
Expires December 1999 [Page 47]
INTERNET DRAFT IS-IS MIB June 1999
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."
REFERENCE "{}"
DEFVAL { ''H }
::= { isisCircEntry 55 }
isisCircSmallHellos OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Can we send unpadded hellos on LAN circuits? Off means
LAN Hellos must be padded."
DEFVAL { off }
::= { isisCircEntry 56 }
isisManAdjNeighNSAP OBJECT-TYPE
SYNTAX OSINSAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the neighbour if this is a manual
adjacency.
This object follows the replaceOnlyWhileDisabled
behaviour."
::= { isisCircEntry 57 }
isisManAdjNeighSNPA OBJECT-TYPE
SYNTAX SNPAAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNPA of the neighbour if this is a manual adjacency.
This object follows the replaceOnlyWhileDisabled
behaviour."
::= { isisCircEntry 58 }
isisCircIPEncaps OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Should we encapsulate IS-IS in IP packets?"
DEFVAL { false }
::= { isisCircEntry 59 }
isisCircUpTime OBJECT-TYPE
Expires December 1999 [Page 48]
INTERNET DRAFT IS-IS MIB June 1999
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in seconds since this circuit entered
state 'up'.
Note: This can be implemented as start time less
the current time."
::= { isisCircEntry 60 }
-- The Circuit IS Group
--
-- The Circuit IS Group is present if the system supports the
-- IS functions of the ISO 9542 protocol.
-- The Circuit IS Table
--
-- This table is not implemented - jdp
-- The IS Adjacency Group
--
-- The IS Adjacency Group is current and contains information
-- about adjacencies to routers maintained by the Integrated
-- IS-IS protocol
--
-- The IS Adjacency Table
--
-- Each adjacency to an IS corresponds to one entry in this
-- table.
isisISAdjTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisISAdjEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of adjacencies to Intermediate Systems."
::= { isisISAdj 1 }
isisISAdjEntry OBJECT-TYPE
SYNTAX IsisISAdjEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Expires December 1999 [Page 49]
INTERNET DRAFT IS-IS MIB June 1999
"Each entry corresponds to one adjacency to an
Intermediate System on this system."
INDEX { isisISAdjSysInstance,
isisISAdjCircIndex,
isisISAdjIndex }
::= { isisISAdjTable 1 }
IsisISAdjEntry ::=
SEQUENCE {
isisISAdjSysInstance
Integer32,
isisISAdjCircIndex
Integer32,
isisISAdjIndex
Integer32,
isisISAdjState
INTEGER,
isisISAdjNeighSNPAAddress
SNPAAddress,
isisISAdjNeighSysType
INTEGER,
isisISAdjNeighSysID
OCTET STRING,
isisISAdjUsage
INTEGER,
isisISAdjHoldTimer
Integer32,
isisISAdjNeighPriority
ISPriority,
isisISAdjUpTime
Integer32
}
isisISAdjSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds."
::= { isisISAdjEntry 1 }
isisISAdjCircIndex OBJECT-TYPE
SYNTAX Integer32
Expires December 1999 [Page 50]
INTERNET DRAFT IS-IS MIB June 1999
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Circuit Index of the Circuit which is the parent of
the
IS adjacency."
::= { isisISAdjEntry 2 }
isisISAdjIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value identifying the IS adjacency from all
other such adjacencies on this circuit. This value is
assigned by the system when the adjacency is created
automatically."
::= { isisISAdjEntry 3 }
isisISAdjState OBJECT-TYPE
SYNTAX INTEGER {
initializing (1),
up (2),
failed (3),
down (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the adjacency"
REFERENCE "{ISIS.aoi adjacencyState (78)}"
::= { isisISAdjEntry 4 }
isisISAdjNeighSNPAAddress OBJECT-TYPE
SYNTAX SNPAAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNPA address of the neighboring system."
REFERENCE "{ISIS.aoi neighbourSNPAAddress (79)}"
::= { isisISAdjEntry 5 }
isisISAdjNeighSysType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
Expires December 1999 [Page 51]
INTERNET DRAFT IS-IS MIB June 1999
intermediateSystem(3),
l1IntermediateSystem(4),
l2IntermediateSystem(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the neighboring system."
REFERENCE "{ISIS.aoi neighbourSystemType (80)}"
::= { isisISAdjEntry 6 }
isisISAdjNeighSysID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system ID and circuit ID of the neighboring
Intermediate System set from the source ID field
of the neighbor's IIH PDUs."
REFERENCE "{ISIS.aoi neighbourSystemIds (83)}"
::= { isisISAdjEntry 7 }
isisISAdjUsage OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
level1(2),
level2(3),
level1and2(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An adjacency of type level1 is used for level 1
traffic only. An adjacency of type level2 is used
for level 2 traffic only. An adjacency of type level1and2
is used for both level 1 and level 2 traffic. There
may be two adjacencies (of types level1 and level2)
between the same pair of Intermediate Systems."
REFERENCE "{ISIS.aoi adjacencyUsage (82)}"
::= { isisISAdjEntry 8 }
isisISAdjHoldTimer OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
Expires December 1999 [Page 52]
INTERNET DRAFT IS-IS MIB June 1999
DESCRIPTION
"The holding time for this adjacency updated from
received IIH PDUs."
REFERENCE "{ISIS.aoi holdingTimer (85)}"
::= { isisISAdjEntry 9 }
isisISAdjNeighPriority OBJECT-TYPE
SYNTAX ISPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority of the neighboring Intermediate System for
becoming the LAN Level 1 Designated Intermediate System
if the value of isisISAdjNeighSysType is
L1IntermediateSystem or LAN Level 2 Designated
Intermediate System if the value of
isisISAdjNeighSysType is L2IntermediateSystem."
REFERENCE "{ISIS.aoi lANPriority (86)}"
::= { isisISAdjEntry 10 }
isisISAdjUpTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in seconds since this adjacency entered
state 'up'.
Note: This can be implemented as start time less
the current time."
::= { isisISAdjEntry 11 }
-- The IS Adjacency Area Address Table
-- The IS Adjacency Area Address Table contains the set of
-- Area Addresses of neighboring
-- Intermediate Systems as reported in IIH PDUs.
isisISAdjAreaAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisISAdjAreaAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the set of Area Addresses of
neighboring Intermediate Systems as reported in received
Expires December 1999 [Page 53]
INTERNET DRAFT IS-IS MIB June 1999
IIH PDUs."
REFERENCE "{ISIS.aoi areaAddressesOfNeighbour (84)}"
::= { isisISAdj 2 }
isisISAdjAreaAddrEntry OBJECT-TYPE
SYNTAX IsisISAdjAreaAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one Area Address reported by a
neighboring Intermediate System in its IIH PDUs."
INDEX { isisISAdjAreaAddrSysInstance,
isisISAdjAreaAddrCircIndex,
isisISAdjAreaAddrAdjIndex,
isisISAdjAreaAddress }
::= { isisISAdjAreaAddrTable 1 }
IsisISAdjAreaAddrEntry ::=
SEQUENCE {
isisISAdjAreaAddrSysInstance
Integer32,
isisISAdjAreaAddrCircIndex
Integer32,
isisISAdjAreaAddrAdjIndex
Integer32,
isisISAdjAreaAddress
OSINSAddress
}
isisISAdjAreaAddrSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds."
::= { isisISAdjAreaAddrEntry 1 }
isisISAdjAreaAddrCircIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the Circuit which is the parent of the
IS adjacency to which this Area Address entry
Expires December 1999 [Page 54]
INTERNET DRAFT IS-IS MIB June 1999
corresponds."
::= { isisISAdjAreaAddrEntry 2 }
isisISAdjAreaAddrAdjIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the IS adjacency to which this entry
belongs."
::= { isisISAdjAreaAddrEntry 3 }
isisISAdjAreaAddress OBJECT-TYPE
SYNTAX OSINSAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One Area Address as reported in IIH PDUs received from
the neighbor."
::= { isisISAdjAreaAddrEntry 4 }
-- The IS Adjacency IP Group
-- The IS Adjacency IP Group is present if the system supports
-- IP Integrated IS-IS
-- The IS Adjacency IP Address Table
-- The IS Adjacency IP Address Table contains the
-- set of IP Addresses of neighboring Intermediate Systems
-- as reported in received IIH PDUs.
isisISAdjIPAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisISAdjIPAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the set of IP Addresses of
neighboring Intermediate Systems as reported in received
IIH PDUs."
::= { isisISAdj 3 }
isisISAdjIPAddrEntry OBJECT-TYPE
SYNTAX IsisISAdjIPAddrEntry
MAX-ACCESS not-accessible
Expires December 1999 [Page 55]
INTERNET DRAFT IS-IS MIB June 1999
STATUS current
DESCRIPTION
"Each entry contains one IP Address reported by a
neighboring Intermediate System in its IIH PDUs."
INDEX { isisISAdjIPAddrSysInstance,
isisISAdjIPAddrCircIndex,
isisISAdjIPAddrAdjIndex
}
::= { isisISAdjIPAddrTable 1 }
IsisISAdjIPAddrEntry ::=
SEQUENCE {
isisISAdjIPAddrSysInstance
Integer32,
isisISAdjIPAddrCircIndex
Integer32,
isisISAdjIPAddrAdjIndex
Integer32,
isisISAdjIPAddress
IpAddress
}
isisISAdjIPAddrSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds."
::= { isisISAdjIPAddrEntry 1 }
isisISAdjIPAddrCircIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the Circuit which is the parent of the
IS adjacency to which this IP Address entry corresponds."
::= { isisISAdjIPAddrEntry 2 }
isisISAdjIPAddrAdjIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Expires December 1999 [Page 56]
INTERNET DRAFT IS-IS MIB June 1999
"The identifier of the IS adjacency to which this entry
belongs."
::= { isisISAdjIPAddrEntry 3 }
isisISAdjIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One IP Address as reported in IIH PDUs received from the
neighbor."
::= { isisISAdjIPAddrEntry 4 }
-- The IS Adjacency Integrated Group
--
-- The IS Adjacency Integrated Group is present if the system
-- supports Integrated ISIS.
--
--
-- The IS Adjacency Protocol Supported Table
--
-- The IS Adjacency Protocol Supported Table contains the set of
-- protocols supported by neighboring
-- Intermediate Systems as reported in received IIH PDUs.
--
isisISAdjProtSuppTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisISAdjProtSuppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the set of protocols supported by
neighboring Intermediate Systems as reported in received
IIH PDUs."
::= { isisISAdj 4 }
isisISAdjProtSuppEntry OBJECT-TYPE
SYNTAX IsisISAdjProtSuppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one protocol supported by a
neighboring Intermediate System as reported in its IIH
PDUs."
INDEX { isisISAdjProtSuppSysInstance,
isisISAdjProtSuppCircIndex,
Expires December 1999 [Page 57]
INTERNET DRAFT IS-IS MIB June 1999
isisISAdjProtSuppAdjIndex,
isisISAdjProtSuppProtocol }
::= { isisISAdjProtSuppTable 1 }
IsisISAdjProtSuppEntry ::=
SEQUENCE {
isisISAdjProtSuppSysInstance
Integer32,
isisISAdjProtSuppCircIndex
Integer32,
isisISAdjProtSuppAdjIndex
Integer32,
isisISAdjProtSuppProtocol
SupportedProtocol
}
isisISAdjProtSuppSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds."
::= { isisISAdjProtSuppEntry 1 }
isisISAdjProtSuppCircIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the Circuit which is the parent of the
IS adjacency to which this supported protocol entry
corresponds."
::= { isisISAdjProtSuppEntry 2 }
isisISAdjProtSuppAdjIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier the IS adjacency to which this entry
corresponds."
::= { isisISAdjProtSuppEntry 3 }
isisISAdjProtSuppProtocol OBJECT-TYPE
Expires December 1999 [Page 58]
INTERNET DRAFT IS-IS MIB June 1999
SYNTAX SupportedProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One supported protocol as reported in IIH PDUs received
from the neighbor."
::= { isisISAdjProtSuppEntry 4 }
--
--
-- The ES Adjacency Group
--
-- The ES Adjacency Group is present if the system supports
-- reception of ES Hellos
-- The ES Adjacency Table
--
-- Not supported - jdp
--
--
-- The Reachable Address Group
--
-- The Reachable Address Group is optional.
-- The Reachable Address Table
-- Each entry records information about a reachable address
-- (NSAP or address prefix) manually configured on the system
-- or learned through another protocol.
isisRATable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisRAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Reachable Addresses to NSAPs or Address
Prefixes."
::= { isisReachAddr 1 }
isisRAEntry OBJECT-TYPE
SYNTAX IsisRAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry defines a Reachable Address to a NSAP or
Address Prefix."
INDEX { isisRASysInstance,
isisRACircIndex,
isisRAIndex }
Expires December 1999 [Page 59]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisRATable 1 }
IsisRAEntry ::=
SEQUENCE {
isisRASysInstance
Integer32,
isisRACircIndex
Integer32,
isisRAIndex
Integer32,
isisRAExistState
RowStatus,
isisRAOperState
OperState,
isisRAAddrPrefix
NSAPPrefix,
isisRAMapType
INTEGER,
isisRADefMetric
DefaultMetric,
isisRADelMetric
OtherMetric,
isisRAExpMetric
OtherMetric,
isisRAErrMetric
OtherMetric,
isisRADefMetricType
MetricType,
isisRADelMetricType
MetricType,
isisRAExpMetricType
MetricType,
isisRAErrMetricType
MetricType,
isisRASNPAAddress
SNPAAddress,
isisRASNPAMask
SNPAPrefix,
isisRASNPAPrefix
SNPAPrefix,
isisRAType
INTEGER
}
isisRASysInstance OBJECT-TYPE
Expires December 1999 [Page 60]
INTERNET DRAFT IS-IS MIB June 1999
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the Integrated IS-IS instance to which
this row corresponds. This object follows the index and
manualOrAutomatic behaviours."
::= { isisRAEntry 1 }
isisRACircIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the Circuit over which this
destination is reachable. This object follows the index
and manualOrAutomatic behaviours."
::= { isisRAEntry 2 }
isisRAIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier for this isisRAEntry. This value must be
unique amongst all Reachable Addresses on the same parent
Circuit. This object follows the index and
manualOrAutomatic behaviours."
::= { isisRAEntry 3 }
isisRAExistState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The existence state of this Reachable Address. This
object follows the Row Status behaviours."
DEFVAL { active }
::= { isisRAEntry 4 }
isisRAOperState OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
Expires December 1999 [Page 61]
INTERNET DRAFT IS-IS MIB June 1999
"The operational state of the Reachable Address. This
object follows the operationalState and manualOrAutomatic
behaviours."
DEFVAL { off }
::= { isisRAEntry 5 }
isisRAAddrPrefix OBJECT-TYPE
SYNTAX NSAPPrefix
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination of this Reachable Address. This is an
Address Prefix. This object follows the
replaceOnlyWhileDisabled and manualOrAutomatic
behaviours."
REFERENCE "{ISIS.aoi addressPrefix (98)}"
::= { isisRAEntry 6 }
isisRAMapType OBJECT-TYPE
SYNTAX INTEGER {
none (1),
explicit (2),
extractIDI (3),
extractDSP (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of mapping to be employed to ascertain the SNPA
Address which should be used in forwarding PDUs for this
Reachable Address prefix. This object follows the
manualOrAutomatic behaviour. The following values of
mapping type are defined:
none: The mapping is null because the neighbor SNPA is
implicit by nature of the subnetwork (e.g. a
point-to-point linkage).
explicit: The subnetwork addresses in the object
isisRASNPAAddress is to be used.
extractIDI: The SNPA is embedded in the IDI of the
destination NSAP Address. The mapping algorithm
extracts the SNPA to be used according to the format
and encoding rules of ISO8473/Add2. This SNPA
extraction algorithm can be used in conjunction with
Reachable Address prefixes from the X.121, F.69, E.163
and E.164 addressing subdomains.
Expires December 1999 [Page 62]
INTERNET DRAFT IS-IS MIB June 1999
extractDSP: All, or a suffix, of the SNPA is embedded
in the DSP of the destination address. This SNPA
extraction algorithm extracts the embedded subnetwork
addressing information by performing a logical AND of
the isisRASNPAMask object value with the destination
address. The part of the SNPA extracted from the
destination NSAP is appended to the isisRASNPAPrefix
object value to form the next hop subnetwork
addressing information."
REFERENCE "{ISO10589-ISIS.aoi mappingType (107)}"
::= { isisRAEntry 7 }
isisRADefMetric OBJECT-TYPE
SYNTAX DefaultMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default metric value for reaching the specified
prefix over this circuit. This object follows the
manualOrAutomatic behaviour."
REFERENCE "{ISIS.aoi defaultMetric (99)}"
DEFVAL { 20 }
::= { isisRAEntry 8 }
isisRADelMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The delay metric for reaching the specified prefix over
this circuit. This object follows the manualOrAutomatic
behaviour. The value zero is reserved to indicate that
this metric is not supported."
REFERENCE "{ISIS.aoi delayMetric (100)}"
DEFVAL { 0 }
::= { isisRAEntry 9 }
isisRAExpMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The expense metric for reaching the specified prefix
over this circuit. This object follows the
manualOrAutomatic behaviour. The value zero is reserved
Expires December 1999 [Page 63]
INTERNET DRAFT IS-IS MIB June 1999
to indicate that this metric is not supported."
REFERENCE "{ISIS.aoi expenseMetric (101)}"
DEFVAL { 0 }
::= { isisRAEntry 10 }
isisRAErrMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The error metric for reaching the specified prefix over
this circuit. This object follows the manualOrAutomatic
behaviour. The value zero is reserved to indicate that
this metric is not supported."
REFERENCE "{ISIS.aoi errorMetric (102)}"
DEFVAL { 0 }
::= { isisRAEntry 11 }
isisRADefMetricType OBJECT-TYPE
SYNTAX MetricType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the default metric is internal or
external. This object follows the manualOrAutomatic
behaviour."
REFERENCE "{ISIS.aoi defaultMetricType (103)}"
DEFVAL { internal }
::= { isisRAEntry 12 }
isisRADelMetricType OBJECT-TYPE
SYNTAX MetricType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the delay metric is internal or
external. This object follows the manualOrAutomatic
behaviour."
REFERENCE "{ISO10589-ISIS.aoi delayMetricType (104)}"
DEFVAL { internal }
::= { isisRAEntry 13 }
isisRAExpMetricType OBJECT-TYPE
SYNTAX MetricType
MAX-ACCESS read-create
Expires December 1999 [Page 64]
INTERNET DRAFT IS-IS MIB June 1999
STATUS current
DESCRIPTION
"Indicates whether the expense metric is internal or
external. This object follows the manualOrAutomatic
behaviour."
REFERENCE "{ISIS.aoi expenseMetricType (105)}"
DEFVAL { internal }
::= { isisRAEntry 14 }
isisRAErrMetricType OBJECT-TYPE
SYNTAX MetricType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the error metric is internal or
external. This object follows the manualOrAutomatic
behaviour."
REFERENCE "{ISIS.aoi errorMetricType (106)}"
DEFVAL { internal }
::= { isisRAEntry 15 }
isisRASNPAAddress OBJECT-TYPE
SYNTAX SNPAAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The SNPA Address to which a PDU may be forwarded in
order to reach a destination which matches the address
prefix of the Reachable Address. This object follows the
manualOrAutomatic behaviour."
REFERENCE "{ISIS.aoi sNPAAddresses (109)}"
-- note only one address may be specified per Reachable Address
-- in the MIB
DEFVAL { ''H }
::= { isisRAEntry 16 }
isisRASNPAMask OBJECT-TYPE
SYNTAX SNPAPrefix
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A bit mask with 1 bits indicating the positions in the
effective destination address from which embedded SNPA
information is to be extracted. For the extraction the
first octet of the isisRASNPAMask object value is aligned
Expires December 1999 [Page 65]
INTERNET DRAFT IS-IS MIB June 1999
with the first octet (AFI) of the NSAP Address. If the
isisRASNPAMask object value and NSAP Address are of
different lengths, the shorter of the two is logically
padded with zeros before performing the extraction. This
object follows the manualOrAutomatic behaviour."
REFERENCE "{ISIS.aoi sNPAMask (122)}"
DEFVAL { '00'H }
::= { isisRAEntry 17 }
isisRASNPAPrefix OBJECT-TYPE
SYNTAX SNPAPrefix
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A fixed SNPA prefix for use when the isisRAMapType is
extractDSP. The SNPA Address to use is formed by
concatenating the fixed SNPA prefix with a variable SNPA
part that is extracted from the effective destination
address. For Reachable Address prefixes in which the
entire SNPA is embedded in the DSP the SNPA Prefix shall
be null. This object follows the manualOrAutomatic
behaviour."
REFERENCE "{ISIS.aoi sNPAPrefix (123)}"
DEFVAL { '00'H }
::= { isisRAEntry 18 }
isisRAType OBJECT-TYPE
SYNTAX INTEGER
{
manual (1),
automatic (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The type of Reachable address. Those of type
manual are created by the network manager. Those
of type automatic are created through propogation
of routing information from another routing
protocol (eg. IDRP). "
DEFVAL {manual}
::= {isisRAEntry 19 }
-- The IP Reachable Address Group
Expires December 1999 [Page 66]
INTERNET DRAFT IS-IS MIB June 1999
-- The IP Reachable Address Group is optional.
-- The IP Reachable Address Table
-- Each entry records information about one IP reachable
-- address manually configured on this system or learned from
-- another protocol.
isisIPRATable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisIPRAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP Reachable Addresses to networks,
subnetworks or hosts either manually configured or
learned from another protocol."
::= { isisIPReachAddr 1 }
isisIPRAEntry OBJECT-TYPE
SYNTAX IsisIPRAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry defines an IP Reachable Address to a network,
subnetwork or host."
INDEX { isisIPRASysInstance,
isisIPRACircIndex,
isisIPRAType,
isisIPRAIndex }
::= { isisIPRATable 1 }
IsisIPRAEntry ::=
SEQUENCE {
isisIPRASysInstance
Integer32,
isisIPRACircIndex
Integer32,
isisIPRAIndex
Integer32,
isisIPRAType
INTEGER,
isisIPRADest
IpAddress,
isisIPRAMask
Expires December 1999 [Page 67]
INTERNET DRAFT IS-IS MIB June 1999
IpAddress,
isisIPRAExistState
RowStatus,
isisIPRAOperState
OperState,
isisIPRADefMetric
DefaultMetric,
isisIPRADelMetric
OtherMetric,
isisIPRAExpMetric
OtherMetric,
isisIPRAErrMetric
OtherMetric,
isisIPRADefMetricType
MetricType,
isisIPRADelMetricType
MetricType,
isisIPRAExpMetricType
MetricType,
isisIPRAErrMetricType
MetricType,
isisIPRASNPAAddress
SNPAAddress
}
isisIPRASysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the Integrated IS-IS instance to which
this row corresponds. This object follows the index and
manualOrAutomatic behaviours."
::= { isisIPRAEntry 1 }
isisIPRACircIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the Circuit over which this IP
destination is reachable. This object follows the index
and manualOrAutomatic behaviours."
::= { isisIPRAEntry 2 }
Expires December 1999 [Page 68]
INTERNET DRAFT IS-IS MIB June 1999
isisIPRAIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier for this isisIPRAEntry. This value must
be unique amongst all IP Reachable Addresses on the same
parent Circuit. This object follows the index and
manualOrAutomatic behaviours."
::= { isisIPRAEntry 3 }
isisIPRAType OBJECT-TYPE
SYNTAX INTEGER
{
manual (1),
automatic (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of this IP Reachable Address. Those of type
manual are created by the network manager. Those of type
automatic are created through propagation of routing
information from another routing protocol."
::= { isisIPRAEntry 4 }
isisIPRADest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination of this IP Reachable Address. This is
either a network address, subnetwork address or host
address. This object follows the manualOrAutomatic
behaviour."
::= { isisIPRAEntry 5 }
isisIPRAMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The network mask for the IP Address in the isisIPRADest
object. This object follows the manualOrAutomatic
behaviour."
Expires December 1999 [Page 69]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisIPRAEntry 6 }
isisIPRAExistState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of this IP Reachable Address. This object
follows the ExistenceState and manualOrAutomatic
behaviours."
DEFVAL { active }
::= { isisIPRAEntry 7 }
isisIPRAOperState OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operational state of the IP Reachable Address. This
object follows the operationalState and manualOrAutomatic
behaviours."
DEFVAL { off }
::= { isisIPRAEntry 8 }
isisIPRADefMetric OBJECT-TYPE
SYNTAX DefaultMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default metric value for reaching the specified
destination over this circuit. This object follows the
manualOrAutomatic behaviour."
DEFVAL { 20 }
::= { isisIPRAEntry 9 }
isisIPRADelMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delay metric value for reaching the specified
destination over this circuit. The value zero is reserved
to mean the metric is not supported. This object follows
the manualOrAutomatic behaviour."
DEFVAL { 0 }
Expires December 1999 [Page 70]
INTERNET DRAFT IS-IS MIB June 1999
::= { isisIPRAEntry 10 }
isisIPRAExpMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The expense metric value for reaching the specified
destination over this circuit. The value zero is reserved
to mean the metric is not supported. This object follows
the manualOrAutomatic behaviour."
DEFVAL { 0 }
::= { isisIPRAEntry 11 }
isisIPRAErrMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The error metric value for reaching the specified
destination over this circuit. The value zero is reserved
to mean the metric is not supported. This object follows
the manualOrAutomatic behaviour."
DEFVAL { 0 }
::= { isisIPRAEntry 12 }
isisIPRADefMetricType OBJECT-TYPE
SYNTAX MetricType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the default metric is internal or
external. This object follows the manualOrAutomatic
behaviour."
DEFVAL { internal }
::= { isisIPRAEntry 13 }
isisIPRADelMetricType OBJECT-TYPE
SYNTAX MetricType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the delay metric is internal or
external. This object follows the manualOrAutomatic
behaviour."
Expires December 1999 [Page 71]
INTERNET DRAFT IS-IS MIB June 1999
DEFVAL { internal }
::= { isisIPRAEntry 14 }
isisIPRAExpMetricType OBJECT-TYPE
SYNTAX MetricType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the expense metric is internal or
external. This object follows the manualOrAutomatic
behaviour."
DEFVAL { internal }
::= { isisIPRAEntry 15 }
isisIPRAErrMetricType OBJECT-TYPE
SYNTAX MetricType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the error metric is internal or
external. This object follows the manualOrAutomatic
behaviour."
DEFVAL { internal }
::= { isisIPRAEntry 16 }
isisIPRASNPAAddress OBJECT-TYPE
SYNTAX SNPAAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNPA Address to which a PDU may be forwarded in
order to reach a destination which matches this IP
Reachable Address. This object follows the
manualOrAutomatic behaviour."
DEFVAL { ''H }
::= { isisIPRAEntry 17 }
-- The Circuit CLNS Group
--
-- The Circuit CLNS Table contains objects controlling the
-- operation of the IS functions of the CLNS protocol
--
-- Removed - jdp
--
Expires December 1999 [Page 72]
INTERNET DRAFT IS-IS MIB June 1999
-- The IP Destination Group
-- The IP Destination Group is present if the system forwards
-- IP packets.
-- The IP Destination Table
-- The IP Destination Table records information about each
-- destination known to the Intermediate System
isisIPDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsisIPDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Destination Table records information about each
destination known to the Intermediate System."
::= { isisIPDest 1 }
isisIPDestEntry OBJECT-TYPE
SYNTAX IsisIPDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry records information about one IP destination
known to the Intermediate System."
INDEX { isisIPRouteMetTOS,
isisIPRouteDest,
isisIPRouteMask,
isisIPRouteForw }
::= { isisIPDestTable 1 }
IsisIPDestEntry ::=
SEQUENCE {
isisIPRouteDest
IpAddress,
isisIPRouteMask
IpAddress,
isisIPRouteMetTOS
TOS,
isisIPRouteMetType
INTEGER,
isisIPRouteIntMetric
PathCost,
Expires December 1999 [Page 73]
INTERNET DRAFT IS-IS MIB June 1999
isisIPRouteExtMetric
Integer32,
isisIPRouteForw
OBJECT IDENTIFIER,
isisIPRouteSource
INTEGER,
isisIPRouteSysInstance
Integer32
}
isisIPRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP Address."
::= { isisIPDestEntry 1 }
isisIPRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask for the isisIPRouteDest value."
::= { isisIPDestEntry 2 }
isisIPRouteMetTOS OBJECT-TYPE
SYNTAX TOS
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TOS of the metric for this destination."
::= { isisIPDestEntry 3 }
isisIPRouteMetType OBJECT-TYPE
SYNTAX INTEGER {
internal (1),
external (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the metric includes an external
component or not."
::= { isisIPDestEntry 4 }
Expires December 1999 [Page 74]
INTERNET DRAFT IS-IS MIB June 1999
isisIPRouteIntMetric OBJECT-TYPE
SYNTAX PathCost
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal path metric value for this destination."
::= { isisIPDestEntry 5 }
isisIPRouteExtMetric OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external metric value for this destination. If the
metric type is internal then this value is zero."
::= { isisIPDestEntry 6 }
isisIPRouteForw OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OBJECT IDENTIFIER for the first object in the table
entry which corresponds to the entry used for forwarding
packets to this destination. This value is either an
OBJECT IDENTIFIER for an instance of one of the following
objects: isisL2SummAddrSysInstance, isisVirtSysInstance,
isisISAdjSysInstance, isisIPRASysInstance."
::= { isisIPDestEntry 7 }
isisIPRouteSource OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
level1 (2),
level2 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of the destination. Manual is used if the
source is manually configured information on the system.
Level1 is used if the source is Level 1 LSPs. Level2 is
used if the source is Level 2 LSPs."
::= { isisIPDestEntry 8 }
Expires December 1999 [Page 75]
INTERNET DRAFT IS-IS MIB June 1999
isisIPRouteSysInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the Integrated IS-IS instance from
which this reachability information was learned."
::= { isisIPDestEntry 9 }
END
-- End of Object Definitions
Expires December 1999 [Page 76]
INTERNET DRAFT IS-IS MIB June 1999
5. Acknowledgments
This draft MIB is based on March 1994 Internet Draft by Chris
Gunnerr, who should be held blameless for the errors
introduced since then.
We would like to thanks the following individuals for
constructive and valuable comments:
Jeff Gross
Jim Halpin
Dimitri Haskin
Peter Higginson
Jeff Pickering
6. References
[1] "Integrated IS-IS Management Information Base", IETF
Draft, March 1994, Chris Gunner.
[2] ISO 10589, "Intermediate System to Intermediate System
Intra- Domain Routeing Exchange Protocol for use in
Conjunction with the Protocol for Providing the
Connectionless-mode Network Service (ISO 8473)" [Also
republished as RFC 1142]
[3] Callon, R., "Use of OSI IS-IS for Routing in TCP/IP and
Dual Environments", RFC 1195, December 1990
7. Security Considerations
Certain management information defined in this MIB may be
considered sensitive in some network environments.
Therefore, authentication of received SNMP requests and
controlled access to management information should be employed
in such environments.
Expires December 1999 [Page 77]
INTERNET DRAFT IS-IS MIB June 1999
8. Authors' Address
Jeff Parker
Nexabit Networks, Inc.
200 Nickerson Road,
Marlborough, MA 01752
email: jparker@nexabit.com
Expires December 1999 [Page 78]
INTERNET DRAFT IS-IS MIB June 1999
9. Full Copyright Statement
Copyright (C) The Internet Society (1997). All Rights
Reserved.
This document and translations of it may be copied and
furnished to others, and derivative works that comment on or
otherwise explain it or assist in its implementation may be
prepared, copied, published and distributed, in whole or in
part, without restriction of any kind, provided that the above
copyright notice and this paragraph are included on all such
copies and derivative works. However, this document itself
may not be modified in any way, such as by removing the
copyright notice or references to the Internet Society or
other Internet organizations, except as needed for the purpose
of developing Internet standards in which case the procedures
for copyrights defined in the Internet Standards process must
be followed, or as required to translate it into languages
other than English.
The limited permissions granted above are perpetual and will
not be revoked by the Internet Society or its successors or
assigns.
This document and the information contained herein is provided
on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE
USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE."
Expires December 1999 [Page 79]