INTERNET-DRAFT                                         Michael P. Armijo
<draft-ietf-ldapext-locate-07.txt>                          Levon Esibov
February 20, 2002                                             Paul Leach
Expires: August 20, 2002                           Microsoft Corporation
                                                             R.L. Morgan
                                                University of Washington

                Discovering LDAP Services with DNS

Status of this Memo

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC2026.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet- Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   Distribution of this memo is unlimited.  It is filed as <draft-
   ietf-ldapext-locate-07.txt>, and expires on August 20, 2002.
   Please send comments to the authors.

   Copyright Notice

   Copyright (C) The Internet Society (2001).  All Rights Reserved.


Abstract

   A Lightweight Directory Access Protocol (LDAP) request must be
   directed to an appropriate server for processing.  This document
   specifies a method for discovering such servers using information in
   the Domain Name System.









Armijo, Esibov, Leach and Morgan                                [Page 1]


INTERNET-DRAFT   Discovering LDAP Services with DNS    February 20, 2002



1. Introduction

   The LDAPv3 protocol [1] is designed to be a lightweight access
   protocol for directory services supporting X.500 models.  As a
   distributed directory service, the complete set of directory
   information (known as the Directory Information Base) is spread
   across many different servers.  Hence there is the need to
   determine, when initiating or processing a request, which servers
   hold the relevant information.  In LDAP, the Search, Modify, Add,
   Delete, ModifyDN, and Compare operations all specify a Distinguished
   Name (DN) [2] on which the operation is performed.  A client, or a
   server acting on behalf of a client, must be able to determine the
   server(s) that hold the naming context containing that DN, since
   that server (or one of that set of servers) must receive and process
   the request.  This determination process is called "server
   location".  To support dynamic distributed operation, the
   information needed to support server location must be available via
   lookups done at request processing time, rather than, for example,
   as static data configured into each client or server.

   It is possible to maintain the information needed to support server
   location in the directory itself, and X.500 directory deployments
   typically do so.  In practice, however, this only permits location
   of servers within a limited X.500-connected set.  LDAP-specific
   methods of maintaining server location information in the directory
   have not yet been standardized.  This document defines an
   alternative method of managing server location information using the
   Domain Name System. This method takes advantage of the global
   deployment of the DNS, by allowing LDAP server location information
   for any existing DNS domain to be published by creating the records
   described below.  A full discussion of the benefits and drawbacks of
   the various directory location and naming methods is beyond the
   scope of this document.

   RFC 2247[3] defines an algorithm for mapping DNS domain names into
   DNs.  This document defines the inverse mapping, from DNs to DNS
   domain names, based on the conventions in [3], for use in this
   server location method.  The server location method described in
   this document is only defined for DNs that can be so mapped, i.e.,
   those DNs that are based on domain names.  In practice this is
   reasonable because many objects of interest are named with domain
   names, and use of domain-name-based DNs is becoming common.



2. Mapping Distinguished Names into Domain Names

   This section defines a method of converting a DN into a DNS domain
   name for use in the server location method described below.  Some
   DNs cannot be converted into a domain name.  Converted DNs result
   in a fully qualified domain name.

Armijo, Esibov, Leach and Morgan                                [Page 2]


INTERNET-DRAFT   Discovering LDAP Services with DNS    February 20, 2002



   The output domain name is initially empty.  The DN is processed in
   right-to-left order (i.e., beginning with the first RDN in the
   sequence of RDNs).  An RDN is able to be converted if it (1)
   consists of a single AttributeTypeAndValue; (2) the attribute type
   is "DC"; and (3) the attribute value is non-null.  If it can be
   converted, the attribute value is used as a domain name component
   (label).  The first such value becomes the rightmost (i.e., most
   significant) domain name component, and successive converted RDN
   values extend to the left.  If an RDN cannot be converted,
   processing stops.  If the output domain name is empty when
   processing stops, the DN cannot be converted into a domain name.

   For DN:

   cn=John Doe,ou=accounting,dc=example,dc=net

   The client would convert the DC components as defined above into
   DNS name:

   example.net

   The determined DNS name will be submitted as a DNS query using the
   algorithm defined in section 3.



3. Locating LDAPv3 servers through DNS

   LDAPv3 server location information is to be stored using DNS Service
   Location Record (SRV)[5].  The data in a SRV record contains the DNS
   name of the server that provides the LDAP service, corresponding
   Port number, and parameters that enable the client to choose an
   appropriate server from multiple servers according to the algorithm
   described in [5].  The name of this record has the following format:

      _<Service>._<Proto>.<Domain>.

   where <Service> is "ldap", and <Proto> is "tcp". <Domain> is the
   domain name formed by converting the DN of a naming context mastered
   by the LDAP Server into a domain name using the algorithm in
   Section 2.  Note that "ldap" is the symbolic name for the LDAP
   service in Assigned Numbers[6], as required by [5].










Armijo, Esibov, Leach and Morgan                                [Page 3]


INTERNET-DRAFT   Discovering LDAP Services with DNS    February 20, 2002


   Presence of such records enables clients to find the LDAP servers
   using standard DNS query [4].  A client (or server) seeking an LDAP
   server for a particular DN converts that DN to a domain name using
   the algorithm of Section 2, does a SRV record query using the DNS
   name formed as described in the preceding paragraph, and interprets
   the response as described in [5] to determine a host (or hosts) to
   contact. As an example, a client that searches for an LDAP server
   for the DN "ou=foo,dc=example,dc=net" that supports the TCP protocol
   will submit a DNS query for a set of SRV records with owner name:

      _ldap._tcp.example.net.

   The client will receive the list of SRV records published in DNS
   that satisfy the requested criteria.  The following is an example of
   such a record:

      _ldap._tcp.example.net.   IN        SRV  0 0 389 phoenix.example.net.

   The set of returned records may contain multiple records in the case
   where multiple LDAP servers serve the same domain.  If there are no
   matching SRV records available for the converted DN the client SHOULD
   NOT attempt to 'walk the tree' by removing the least significant
   portion of the constructed fully qualified domain name.


4.  IANA Considerations

   This document does not require any IANA actions.


5. Security Considerations

   DNS responses can typically be easily spoofed.  Clients using this
   location method SHOULD ensure, via use of strong security
   mechanisms, that the LDAP server they contact is the one they
   intended to contact.  See [7] for more information on security
   threats and security mechanisms.

   When using LDAP with TLS the client must check the server's name,
   as described in section 3.6 of [RFC 2830].  As specified there, the
   name the client checks for is the server's name before any
   potentially insecure transformations, including the SRV record
   lookup specified in this memo.  Thus the name the client must check
   for is the name obtained by doing the mapping step defined in
   section 2 above.  For example, if the DN "cn=John
   Doe,ou=accounting,dc=example,dc=net" is converted to the DNS name
   "example.net", the server's name must match "example.net".

   This document describes a method that uses DNS SRV records to
   discover LDAP servers.  All security considerations related to DNS
   SRV records are inherited by this document.  See the security
   considerations section in [5] for more details.

Armijo, Esibov, Leach and Morgan                                [Page 4]


INTERNET-DRAFT   Discovering LDAP Services with DNS    February 20, 2002


6. References

   [1]  Wahl, M., Howes, T. and S. Kille, "Lightweight Directory Access
        Protocol(v3)", RFC 2251, December 1997.

   [2]  Wahl, M., Kille, S. and T. Howes, "Lightweight Directory Access
        Protocol (v3):  UTF-8 String Representation of Distinguished
        Names", RFC 2253, December 1997.

   [3]  Kille, S. and M. Wahl, "Using Domains in LDAP/X.500
        Distinguished Names", RFC 2247, January 1998.

   [4]  Mockapetris, P., "DOMAIN NAMES - CONCEPTS AND FACILITIES", RFC
        1034, STD 13, November 1987.

   [5]  Gulbrandsen, A., Vixie, P. and L. Esibov, "A DNS RR for
        specifying the location of services (DNS SRV)", RFC 2782,
        February 2000.

   [6]  Reynolds, J. and J. Postel, "Assigned Numbers", STD 2, RFC
        1700, October 1994.

   [7]  Wahl, M., Alvestrand, H., Hodges, J. and Morgan, R.,
        "Authentication Methods for LDAP", RFC 2829, May 2000.

   [8]  Hodges, J., Morgan, R., Wahl, M., "Lightweight Directory Access
        Protocol (v3): Extension for Transport Layer Security", RFC 2830,
        May 2000.






7. Authors' Addresses

   Michael P. Armijo
   One Microsoft Way
   Redmond, WA 98052
   micharm@microsoft.com

   Paul Leach
   One Microsoft Way
   Redmond, WA 98052
   paulle@microsoft.com

   Levon Esibov
   One Microsoft Way
   Redmond, WA 98052
   levone@microsoft.com



Armijo, Esibov, Leach and Morgan                                [Page 5]


INTERNET-DRAFT   Discovering LDAP Services with DNS    February 20, 2002

   RL "Bob" Morgan
   University of Washington
   4545 15th Ave NE
   Seattle, WA  98105
   US

   Phone: +1 206 221 3307
   EMail: rlmorgan@washington.edu
   URI:   http://staff.washington.edu/rlmorgan/


8.  Intellectual Property Statement

The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to  pertain
to the implementation or use of the technology described in this
document or the extent to which any license under such rights might or
might not be available; neither does it represent that it has made any
effort to identify any such rights.  Information on the IETF's
procedures with respect to rights in standards-track and standards-
related documentation can be found in BCP-11.  Copies of claims of
rights made available for publication and any assurances of licenses to
be made available, or the result of an attempt made to obtain a general
license or permission for the use of such proprietary rights by
implementors or users of this specification can be obtained from the
IETF Secretariat.

The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary rights
which may cover technology that may be required to practice this
standard.  Please address the information to the IETF Executive
Director.


9.  Full Copyright Statement

Copyright (C) The Internet Society (2001).  All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it or
assist in its implementation may be prepared, copied, published and
distributed, in whole or in part, without restriction of any kind,
provided that the above copyright notice and this paragraph are included
on all such copies and derivative works.  However, this document itself
may not be modified in any way, such as by removing the copyright notice
or references to the Internet Society or other Internet organizations,
except as needed for the purpose of developing Internet standards in
which case the procedures for copyrights defined in the Internet
Standards process must be followed, or as required to translate it into
languages other than English.  The limited permissions granted above are
perpetual and will not be revoked by the Internet Society or its
successors or assigns.  This document and the information contained
herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE


Armijo, Esibov, Leach and Morgan                                [Page 6]


INTERNET-DRAFT   Discovering LDAP Services with DNS    February 20, 2002

INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."


10.  Expiration Date

   This documentis filed as <draft-ietf-ldapext-locate-06.txt>, and
   expires August 20, 2002.

Armijo, Esibov, Leach and Morgan                                [Page 7]