Lemonade Working Group B. Leiba
Internet-Draft IBM T.J. Watson Research Center
Intended status: Standards Track February 21, 2008
Expires: August 24, 2008
Support for Sieve in Internet Message Access Protocol (IMAP4)
draft-ietf-lemonade-imap-sieve-05
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on August 24, 2008.
Copyright Notice
Copyright (C) The IETF Trust (2008).
Leiba Expires August 24, 2008 [Page 1]
Internet-Draft Lemonade-Sieve February 2008
Abstract
Sieve defines an email filtering language that can, in principle,
plug into any point in the processing of an email message. As
defined in the base specification, it plugs into mail delivery. This
document defines how Sieve can plug into points in the IMAP protocol
where messages are created or changed, adding the option of user-
defined or installation-defined filtering (or, with Sieve extensions,
features such as notifications).
Leiba Expires August 24, 2008 [Page 2]
Internet-Draft Lemonade-Sieve February 2008
Note
While this document defines extensions to IMAP and Sieve, it is the
work of the Lemonade Working Group (Enhancements to Internet email to
support diverse service environments), and discussion of it is on the
lemonade mailing list at mailto:lemonade@ietf.org. Subscription
requests can be sent to
mailto:lemonade-request@ietf.org?body=subscribe (send an email
message with the word "subscribe" in the body). A WWW archive of
back messages is available at
http://www.ietf.org/mail-archive/web/lemonade/index.html
Leiba Expires August 24, 2008 [Page 3]
Internet-Draft Lemonade-Sieve February 2008
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . 6
1.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2. Conventions used in this document . . . . . . . . . . . . 6
2. The IMAP "IMAPSieve" Extension . . . . . . . . . . . . . . 7
2.1. The "IMAPSieve" Capability String . . . . . . . . . . . . 7
2.2. Existing IMAP Functions Affected by IMAPSieve . . . . . . 7
2.2.1. The IMAP APPEND Command . . . . . . . . . . . . . . . . . 7
2.2.2. The IMAP MULTIAPPEND Command . . . . . . . . . . . . . . . 7
2.2.3. The IMAP COPY Command . . . . . . . . . . . . . . . . . . 8
2.2.4. Changes to IMAP Message Flags . . . . . . . . . . . . . . 8
2.2.5. New or Changed IMAP Message Annotations . . . . . . . . . 8
2.3. New Functions Defined by IMAPSieve . . . . . . . . . . . . 9
2.3.1. Changes to Metadata . . . . . . . . . . . . . . . . . . . 9
3. Applicable Sieve Actions and Interactions . . . . . . . . 10
3.1. The Implicit Keep . . . . . . . . . . . . . . . . . . . . 10
3.2. The Keep Action . . . . . . . . . . . . . . . . . . . . . 10
3.3. The Fileinto Action . . . . . . . . . . . . . . . . . . . 10
3.4. The Redirect Action . . . . . . . . . . . . . . . . . . . 11
3.5. The Reject Action . . . . . . . . . . . . . . . . . . . . 11
3.6. The Discard Action . . . . . . . . . . . . . . . . . . . . 11
3.7. The Notify Action . . . . . . . . . . . . . . . . . . . . 12
3.8. The Addheader and Deleteheader Actions . . . . . . . . . . 12
3.9. The Setflag, Deleteflag, and Removeflag Actions . . . . . 12
3.10. The Vacation Action . . . . . . . . . . . . . . . . . . . 12
3.11. New Sieve Environment Item: cause . . . . . . . . . . . . 12
3.12. New Sieve Environment Item: mailbox . . . . . . . . . . . 13
3.13. New Sieve Environment Item: changedflags . . . . . . . . . 13
3.14. New Sieve Environment Item: changedannotations . . . . . . 13
3.15. Interaction With Sieve Tests (Comparisons) . . . . . . . . 14
4. Examples . . . . . . . . . . . . . . . . . . . . . . . . . 15
5. Security Considerations . . . . . . . . . . . . . . . . . 16
6. IANA Considerations . . . . . . . . . . . . . . . . . . . 17
6.1. Registration of imapsieve extension . . . . . . . . . . . 17
6.2. Registration of environment item: cause . . . . . . . . . 17
6.3. Registration of environment item: mailbox . . . . . . . . 17
6.4. Registration of environment item: changedflags . . . . . . 18
6.5. Registration of environment item: changedannotations . . . 18
6.6. Registration of IMAP METADATA mailbox entry name . . . . . 19
6.7. Registration of IMAP METADATA server entry name . . . . . 19
7. References . . . . . . . . . . . . . . . . . . . . . . . . 21
Leiba Expires August 24, 2008 [Page 4]
Internet-Draft Lemonade-Sieve February 2008
7.1. Normative References . . . . . . . . . . . . . . . . . . . 21
7.2. Non-Normative References . . . . . . . . . . . . . . . . . 21
Author's Address . . . . . . . . . . . . . . . . . . . . . 23
Intellectual Property and Copyright Statements . . . . . . 24
Leiba Expires August 24, 2008 [Page 5]
Internet-Draft Lemonade-Sieve February 2008
1. Introduction
1.1. Overview
Some applications have a need to apply [Sieve] filters in situations
other than initial mail delivery. This is especially true in diverse
service environments, such as when the client is sporadically
connected, is connected through a high-latency or high-cost channel,
or is on a limited-function device. For such clients, it may be very
important, for higher performance and reliability, to take advantage
of server capabilities, including those provided by Sieve filtering
(and Sieve extensions, such as [Notify]).
This specification defines extensions to [IMAP] to support the
invocation of Sieve scripts at times when the IMAP server creates new
messages, or modifies existing ones. It also defines how Sieve
scripts will process these invocations. Support for IMAPSieve
requires support for [Metadata] as well, since the latter is used to
associate scripts with IMAP mailboxes.
1.2. Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "MAY", and "OPTIONAL" in this document are to
be interpreted as described in [Keywds].
Leiba Expires August 24, 2008 [Page 6]
Internet-Draft Lemonade-Sieve February 2008
2. The IMAP "IMAPSieve" Extension
2.1. The "IMAPSieve" Capability String
An IMAP server advertises support for this extension through the
capability string "IMAPSieve" (the string is not case-sensitive, and
is shown here with this capitalization for readability). A server
that advertises IMAPSieve is claiming to be in compliance with this
specification in all aspects.
Implementations that support IMAPSieve MUST also support
[Environment], because the latter defines an important way for Sieve
scripts to test the conditions under which they have been invoked.
Notwithstanding this requirement, scripts that use IMAPSieve must
include BOTH capability strings in their required lists.
2.2. Existing IMAP Functions Affected by IMAPSieve
The subsections below describe in detail the IMAP commands and
situations on which IMAPSieve has an effect. Not all Sieve actions
make sense in the case of messages affected by IMAP commands. See
Section 3 for details.
It's important to note that since the base Sieve specification (see
[Sieve]) and its extensions define functions for scripts that are
invoked during initial mail delivery, those function definitions are
necessarily tailored to and limited by that context. This document
extends those function definitions for use during IMAP events. By
nature of that, Sieve functions, in this extended context, may behave
somewhat differently, though their extended behaviour will still be
consistent with the functions' goals.
If more than one message is affected at the same time, each message
triggers the execution of a Sieve script separately. The scripts MAY
be run in parallel.
2.2.1. The IMAP APPEND Command
A message may be added to a mailbox through the IMAP APPEND command.
In a server that advertises IMAPSieve, new messages added in this way
MUST trigger the execution of a Sieve script, subject to the settings
defined through Metadata (see Section 2.3.1).
2.2.2. The IMAP MULTIAPPEND Command
If the IMAP server supports the IMAP [MultiAppend] extension,
messages may be added to a mailbox through the IMAP MULTIAPPEND
command. In a server that advertises IMAPSieve, new messages added
Leiba Expires August 24, 2008 [Page 7]
Internet-Draft Lemonade-Sieve February 2008
in this way MUST trigger the execution of a Sieve script, as with the
APPEND command, also subject to the settings defined through
Metadata.
2.2.3. The IMAP COPY Command
One or more messages may be added to a mailbox through the IMAP COPY
command. In a server that advertises IMAPSieve, new messages added
in this way MUST trigger the execution of a Sieve script, subject to
the settings defined through Metadata.
2.2.4. Changes to IMAP Message Flags
One or more existing messages can have their flags changed in a
number of ways, including:
o The FETCH command (may cause the \Seen flag to be set).
o The STORE command (may cause the \Answered, \Deleted, \Draft,
\Flagged, and \Seen flags to be set or reset, and may cause
keywords to be set or reset).
o The invocation of a Sieve script on an existing message, where the
Sieve implementation supports the [IMAP4Flags] extension and the
script uses one of the actions defined in that extension.
In a server that advertises IMAPSieve, messages whose flags are
changed in any way (except as explained in the next sentence) MUST
trigger the execution of a Sieve script, subject to the settings
defined through Metadata. The exception is that in order to avoid
script loops, flag changes that are made as a result of a script that
was itself invoked because of flag changes SHOULD NOT result in
another script invocation. In any case, implementations MUST take
steps to avoid such loops.
For flag-change events, the Sieve script will see the message flags
as they are AFTER the changes.
2.2.5. New or Changed IMAP Message Annotations
If the IMAP server supports the [Annotate] extension, one or more
existing messages can have annotations added or changed through the
ANNOTATE command. In a server that advertises IMAPSieve, messages
getting new or changed annotations MUST trigger the execution of a
Sieve script, subject to the settings defined through Metadata.
For annotation-change events, the Sieve script will see the message
annotations as they are AFTER the changes.
Leiba Expires August 24, 2008 [Page 8]
Internet-Draft Lemonade-Sieve February 2008
2.3. New Functions Defined by IMAPSieve
2.3.1. Changes to Metadata
Support for IMAPSieve requires support for [Metadata] as well, since
the latter is used to associate scripts with IMAP mailboxes.
When an applicable event occurs on an IMAP mailbox, if there is an
IMAP metadata entry named "/IMAPSieve/Script" for the mailbox, that
entry is used. If there is not, but there is an IMAP metadata entry
named "/IMAPSieve/Script" for the server, that entry is used
(providing a way to define a global script for all mailboxes on a
server). If neither entry exists, then no script will be invoked.
If an "/IMAPSieve/Script" metadata entry was selected above, the
shared value of that metadata name (its "value.shared" attribute)
MUST be the name of the Sieve script that will be invoked in response
to the IMAP event OR the name of another metadata entry, the name
prefixed with "metadata:" (such as "metadata:/IMAPSieve/
ScriptContents"), that contains the actual script in its value.shared
attribute. Note that only the value.shared attribute is used; any
value.priv attributes are ignored.
This specifies the mechanism for "activating" a script for a given
mailbox (or for all mailboxes), but does not specify a mechanism for
creating, storing, or validating the script. Implementations MAY use
[Manage] to acomplish this, using the PUTSCRIPT command to store the
script without using the SETACTIVE command to activate it. In any
case, the script name that is specified in the /IMAPSieve/Script
metadata entry is in a form that depends upon how the server handles
the storing of Sieve scripts.
Only one Sieve script may currently be defined per mailbox,
eliminating the complexity and possible ambiguity involved with
coordinating the results of multiple scripts. Any sub-filtering is
done in the Sieve script. For example, if it's only necessary to
deal with flag changes, but not with new messages appended or copied,
the Sieve script will still be invoked for all events, and the script
is responsible for checking the event type.
The possibility is open for an extensions to add support for multiple
scripts -- for example, per-client scripts on a multi-client user's
inbox, or per-user scripts on a mailbox that is shared among users.
Because this metadata name is associated with the mailbox, there can
(and it's expected that there will) be different scripts associated
with events for different mailboxes. Indeed, most mailboxes will
probably invoke no script at all.
Leiba Expires August 24, 2008 [Page 9]
Internet-Draft Lemonade-Sieve February 2008
3. Applicable Sieve Actions and Interactions
Since some Sieve actions relate specifically to the delivery of mail,
not all actions make sense when the messages are created by other
means or when changes are made to data associated with existing
messages. This section describes how actions in the base Sieve
specification, and those in extensions known at this writing, relate
to this specification.
In addition to what is specified here, interactions noted in the
individual specifications apply, and must be considered.
3.1. The Implicit Keep
For all cases that fall under IMAPSieve, the implicit keep means that
the message is treated as it would have been if no Sieve script were
run. For APPEND, MULTIAPPEND and COPY, the message is stored into
the target mailbox normally. For flag or annotation changes, the
message is left in the mailbox.
3.2. The Keep Action
The keep action is applicable in all cases that fall under IMAPSieve.
Its behaviour is as described for implicit keep, in Section 3.1.
3.3. The Fileinto Action
If the Sieve implementation supports the fileinto action, that action
is applicable in all cases that fall under IMAPSieve. If the [Copy]
extension is available and the :copy option is specified, the
implicit keep is retained; otherwise, fileinto cancels the implicit
keep, as specified in the base Sieve specification.
For APPEND, MULTIAPPEND, and COPY, the message is stored into the
fileinto mailbox IN ADDITION TO the original target mailbox. For
flag or annotation changes, the message is COPIED into the fileinto
mailbox, without removing the original.
If a keep action is NOT also in effect, the original message is then
marked with the \Deleted flag (and a flag-change Sieve script is NOT
invoked). The implementation MAY then expunge the original message
(WITHOUT expunging other messages in the mailbox), or it MAY choose
to have expunges batched, or done by a user. If the server does the
expunge, the effect is as though a client had flagged the message and
done a UID EXPUNGE (see [UIDPlus]) on the affected message(s) only.
Handling it this way allows clients to handle messages consistently,
and avoids hidden changes that might invalidate their message caches.
Leiba Expires August 24, 2008 [Page 10]
Internet-Draft Lemonade-Sieve February 2008
3.4. The Redirect Action
The redirect action is applicable in all cases that fall under
IMAPSieve. It causes the message to be sent, as specified in the
base Sieve specification, to the designated address. If the [Copy]
extension is available and the :copy option is specified, the
implicit keep is retained; otherwise, redirect cancels the implicit
keep, as specified in the base Sieve specification.
For APPEND, MULTIAPPEND, and COPY, the message is stored into the
target mailbox in addition to being redirected. For flag or
annotation changes, the message remains in its original mailbox.
If a keep action is NOT also in effect, the original message is then
marked with the \Deleted flag (and a flag-change Sieve script is NOT
invoked). The implementation MAY then expunge the original message
(WITHOUT expunging other messages in the mailbox), or it MAY choose
to have expunges batched, or done by a user. If the server does the
expunge, the effect is as though a client had flagged the message and
done a UID EXPUNGE (see [UIDPlus]) on the affected message(s) only.
Handling it this way allows clients to handle messages consistently,
and avoids hidden changes that might invalidate their message caches.
3.5. The Reject Action
The reject action is NOT applicable to any case that falls under
IMAPSieve. Its use MUST result in an error condition that will
terminate the Sieve script.
3.6. The Discard Action
The discard action is applicable in all cases that fall under
IMAPSieve. For APPEND, MULTIAPPEND, and COPY, the message is first
stored into the target mailbox. If an explicit keep action is also
in effect, the discard action now does nothing. Otherwise, the
original message is then marked with the \Deleted flag (and a flag-
change Sieve script is NOT invoked). The implementation MAY then
expunge the original message (WITHOUT expunging other messages in the
mailbox), or it MAY choose to have expunges batched, or done by a
user. If the server does the expunge, the effect is as though a
client had flagged the message and done a UID EXPUNGE (see [UIDPlus])
on the affected message(s) only. Handling it this way allows clients
to handle messages consistently, and avoids hidden changes that might
invalidate their message caches.
Leiba Expires August 24, 2008 [Page 11]
Internet-Draft Lemonade-Sieve February 2008
3.7. The Notify Action
If the [Notify] extension is available, the notify action is
applicable in all cases that fall under IMAPSieve. The result is
that the requested notification is sent, and that the message is
otherwise handled as it would normally have been.
3.8. The Addheader and Deleteheader Actions
Even if the [EditHeader] extension is available, since messages in
IMAP mailboxes are immutable these actions are NOT applicable. Use
of these MUST result in an error condition that will terminate the
Sieve script. Explanation: Using them for flag or annotation changes
to existing messages would cause the message to be changed. Using
them for APPEND, MULTIAPPEND, and COPY would cause unexpected
differences in the stored copy as compared to what the client
expected, and would make the client's message cache invalid
unexpectedly.
3.9. The Setflag, Deleteflag, and Removeflag Actions
If the [IMAP4Flags] extension is available, the actions associated
with it are all applicable to any case that falls under IMAPSieve.
It is worth noting also that the "hasflag" test that is defined in
the IMAP4Flags extension might be particularly useful in scripts
triggered by flag changes ("hasflag" will see the new, changed
flags). The flag changes behave as though a client had made the
change.
As explained above, in order to avoid script loops flag changes that
are made as a result of a script that was itself invoked because of
flag changes SHOULD NOT result in another script invocation. In any
case, implementations MUST take steps to avoid such loops.
3.10. The Vacation Action
Even if the [Vacation] extension is available, the vacation action is
NOT applicable to any case that falls under IMAPSieve. Its use MUST
result in an error condition that will terminate the Sieve script.
3.11. New Sieve Environment Item: cause
Implementations MAY invoke different Sieve scripts for the different
conditions described in this document (append, copy, flag changes,
annotation changes). If the actions to be taken are common, and the
implementation supports the [Include] extension, the common script
code can be included as specified there.
Leiba Expires August 24, 2008 [Page 12]
Internet-Draft Lemonade-Sieve February 2008
It may be preferable, though, to use a single script for all these
conditions. To support that, the implementation MUST set the
[Environment] item "cause", which contains the name of the action
that caused the script to be invoked. Its value is one of the
following:
o APPEND (for invocations resulting from APPEND or MULTIAPPEND)
o COPY (for invocations resulting from COPY)
o FLAG (for invocations resulting from flag changes)
o ANNOTATE (for invocations resulting from new or changed
annotations)
3.12. New Sieve Environment Item: mailbox
The implementation MUST set the [Environment] item "mailbox" to the
name of the mailbox that the affected message is in, in the case of
existing messages, or is targeted to be stored into, in the case of
new messages. The value of this item is fixed when the script
begins, and, in particular, MUST NOT change as a result of any
action, such as "fileinto".
3.13. New Sieve Environment Item: changedflags
If the [IMAP4Flags] extension is available, AND the script was
invoked because of flag changes to an existing message, the
implementation MUST set the [Environment] item "changedflags" to the
name(s) of the flag(s) that have changed. If the script was not
invoked because of flag changes, the value of this item MUST be the
empty string. The script will not know from this item whether the
flags have been set or reset, but it can use the "hasflag" test to
determine the current value. See example 2 in Section 4 for an
example of how this might be used.
3.14. New Sieve Environment Item: changedannotations
If the [Annotate] extension is available, AND the script was invoked
because of annotation changes to an existing message, the
implementation MUST set the [Environment] item "changedannotations"
to the name(s) of the annotation(s) that have changed. If the script
was not invoked because of annotation changes, the value of this item
MUST be the empty string.
Leiba Expires August 24, 2008 [Page 13]
Internet-Draft Lemonade-Sieve February 2008
3.15. Interaction With Sieve Tests (Comparisons)
This extension does not affect the operation of any tests or
comparisons.
Leiba Expires August 24, 2008 [Page 14]
Internet-Draft Lemonade-Sieve February 2008
4. Examples
Example 1:
If a new message is added to the "ActionItems" mailbox, a copy is
sent to the address "actionitems@example.com".
require ["copy", "environment"];
if anyof (environment :is "cause" "APPEND",
environment :is "cause" "COPY") {
if environment :is "mailbox" "ActionItems" {
redirect :copy "actionitems@example.com";
}
}
Example 2:
If the script is called for any message with the \Flagged flag set
(tested through the [IMAP4Flags] extension), a notification is sent
using the [Notify] extension. No notification will be sent, though,
if we're called with an existing message that already had that flag
set.
require ["nofity", "imap4flags", "variables", "environment"];
if environment :matches "mailbox" "*" {
set "mailbox" "${1}";
}
if allof (hasflag "\\Flagged",
not environment :contains "changedflags" "\\Flagged") {
notify :message "Important message in ${mailbox}";
}
Leiba Expires August 24, 2008 [Page 15]
Internet-Draft Lemonade-Sieve February 2008
5. Security Considerations
It is possible to introduce script processing loops by having a Sieve
script that is triggered by flag changes use the actions defined in
the [IMAP4Flags] extension. Implementations MUST take steps to
prevent such loops. One way to avoid this problem is that if a
script is invoked by flag changes, and that script further changes
the flags, those flag changes SHOULD NOT trigger a Sieve script
invocation.
Other security considerations are discussed in [IMAP], and [Sieve],
as well as in some of the other extension documents.
Leiba Expires August 24, 2008 [Page 16]
Internet-Draft Lemonade-Sieve February 2008
6. IANA Considerations
6.1. Registration of imapsieve extension
The following template specifies the IANA registration of the Sieve
extension specified in this document:
To: iana@iana.org
Subject: Registration of new Sieve extension
Capability name: imapsieve
Description: Add Sieve processing for IMAP events.
RFC number: this RFC
Contact address: Barry Leiba <leiba@watson.ibm.com>
This information should be added to the list of sieve extensions
given on http://www.iana.org/assignments/sieve-extensions.
6.2. Registration of environment item: cause
The following template specifies the IANA registration of a sieve
environment item specified in this document:
To: iana@iana.org
Subject: Registration of new Sieve environment item
Item name: cause
Description: The name of the action that caused the script to be
invoked. Its value is one of the following:
o APPEND (for invocations resulting from APPEND or MULTIAPPEND)
o COPY (for invocations resulting from COPY)
o FLAG (for invocations resulting from flag changes)
o ANNOTATE (for invocations resulting from new or changed
annotations)
RFC number: this RFC
Contact address:
Barry Leiba <leiba@watson.ibm.com>
This information should be added to the list of sieve environment
item names given in the [Environment] extension.
6.3. Registration of environment item: mailbox
The following template specifies the IANA registration of a sieve
environment item specified in this document:
Leiba Expires August 24, 2008 [Page 17]
Internet-Draft Lemonade-Sieve February 2008
To: iana@iana.org
Subject: Registration of new Sieve environment item
Item name: mailbox
Description: The name of the mailbox that the affected message is in,
in the case of existing messages, or is targeted to be stored into,
in the case of new messages. The value of this item is fixed when
the script begins, and, in particular, MUST NOT change as a result of
any action, such as "fileinto".
RFC number: this RFC
Contact address:
Barry Leiba <leiba@watson.ibm.com>
This information should be added to the list of sieve environment
item names given in the [Environment] extension.
6.4. Registration of environment item: changedflags
The following template specifies the IANA registration of a sieve
environment item specified in this document:
To: iana@iana.org
Subject: Registration of new Sieve environment item
Item name: changedflags
Description: If the script was invoked because of flag changes to an
existing message, this contains the name(s) of the flag(s) that have
changed. Otherwise, the value of this item MUST be the empty string.
RFC number: this RFC
Contact address:
Barry Leiba <leiba@watson.ibm.com>
This information should be added to the list of sieve environment
item names given in the [Environment] extension.
6.5. Registration of environment item: changedannotations
The following template specifies the IANA registration of a sieve
environment item specified in this document:
To: iana@iana.org
Subject: Registration of new Sieve environment item
Item name: changedannotations
Description: If the script was invoked because of annotation changes
to an existing message, this contains the name(s) of the
annotation(s) that have changed. Otherwise, the value of this item
MUST be the empty string.
RFC number: this RFC
Contact address:
Barry Leiba <leiba@watson.ibm.com>
Leiba Expires August 24, 2008 [Page 18]
Internet-Draft Lemonade-Sieve February 2008
This information should be added to the list of sieve environment
item names given in the [Environment] extension.
6.6. Registration of IMAP METADATA mailbox entry name
The following template specifies the IANA registration of an IMAP
METADATA entry name specified in this document:
To: iana@iana.org
Subject: IMAP METADATA Registration
Please register the following IMAP METADATA item:
[x] Entry [ ] Attribute
[x] Mailbox [ ] Server
Name: /IMAPSieve/Script
Description: This entry name is used to define mailbox metadata
associated with IMAPSieve events for the associated mailbox.
Specifically, this specifies the Sieve script that will be invoked
when IMAP events occur on the specified mailbox.
Content-type: text/plain; charset=utf-8
RFC number: this RFC
Contact person: Barry Leiba
Contact email: leiba@watson.ibm.com
This information should be added to the list of IMAP METADATA item
names given in the [Metadata] extension.
6.7. Registration of IMAP METADATA server entry name
The following template specifies the IANA registration of an IMAP
METADATA entry name specified in this document:
To: iana@iana.org
Subject: IMAP METADATA Registration
Please register the following IMAP METADATA item:
[x] Entry [ ] Attribute
[ ] Mailbox [x] Server
Name: /IMAPSieve/Script
Description: This entry name is used to define metadata associated
globally with IMAPSieve events for the associated server.
Specifically, this specifies the Sieve script that will be invoked
when IMAP events occur on any mailbox in the server that does not
have its own mailbox-level /IMAPSieve/Script entry.
Content-type: text/plain; charset=utf-8
RFC number: this RFC
Contact person: Barry Leiba
Contact email: leiba@watson.ibm.com
This information should be added to the list of IMAP METADATA item
Leiba Expires August 24, 2008 [Page 19]
Internet-Draft Lemonade-Sieve February 2008
names given in the [Metadata] extension.
Leiba Expires August 24, 2008 [Page 20]
Internet-Draft Lemonade-Sieve February 2008
7. References
7.1. Normative References
[Annotate]
Daboo, C. and R. Gellens, "IMAP ANNOTATE Extension", RFC
Editor Queue, draft-ietf-imapext-annotate-16, August 2006.
[Copy] Degener, J., "Sieve Extension: Copying Without Side
Effects", RFC 3894, October 2004.
[Environment]
Freed, N., "Sieve Email Filtering: Environment and Ihave
Extensions", work in
progress, draft-freed-sieve-environment-ihave-00,
November 2006.
[IMAP] Crispin, M., "Internet Message Access Protocol - Version
4rev1", RFC 3501, March 2003.
[IMAP4Flags]
Melnikov, A., "Sieve Mail Filtering Language: IMAP flag
Extension", RFC Editor
Queue, draft-ietf-sieve-imapflags-05, May 2006.
[Keywds] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", RFC 2119, March 1997.
[Metadata]
Daboo, C., "IMAP METADATA Extension", work in
progress, draft-daboo-imap-annotatemore-11, February 2007.
[MultiAppend]
Crispin, M., "Internet Message Access Protocol (IMAP) -
MULTIAPPEND Extension", RFC 3502, March 2003.
[Sieve] Guenther, P., Ed. and T. Showalter, Ed., "Sieve: An Email
Filtering Language", IESG
Evaluation, draft-ietf-sieve-3028bis-12, February 2007.
7.2. Non-Normative References
[]
Degener, J. and P. Guenther, "Sieve Email Filtering:
Editheader Extension", work in
progress, draft-ietf-sieve-editheader-07, November 2006.
[Include] Daboo, C., "SIEVE Email Filtering: Include Extension",
Leiba Expires August 24, 2008 [Page 21]
Internet-Draft Lemonade-Sieve February 2008
work in progress, draft-daboo-sieve-include-05, June 2006.
[Manage] Martin, T. and A. Melnikov, Ed., "A Protocol for Remotely
Managing Sieve Scripts", work in
progress, draft-martin-managesieve-07, November 2006.
[Notify] Melnikov, A., Ed., Leiba, B., Ed., Segmuller, W., and T.
Martin, "Sieve Extension: Notifications", work in
progress, draft-ietf-sieve-notify-07, February 2007.
[UIDPlus] Crispin, M., "Internet Message Access Protocol (IMAP) -
UIDPLUS Extension", RFC 4315, December 2005.
[Vacation]
Showalter, T. and N. Freed, Ed., "Sieve Email Filtering:
Vacation Extension", RFC Editor
Queue, draft-ietf-sieve-vacation-06, February 2006.
Leiba Expires August 24, 2008 [Page 22]
Internet-Draft Lemonade-Sieve February 2008
Author's Address
Barry Leiba
IBM T.J. Watson Research Center
19 Skyline Drive
Hawthorne, NY 10532
US
Phone: +1 914 784 7941
Email: leiba@watson.ibm.com
Leiba Expires August 24, 2008 [Page 23]
Internet-Draft Lemonade-Sieve February 2008
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgment
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
Leiba Expires August 24, 2008 [Page 24]
