Internet-Draft | YANG Data Model for IS-IS SRv6 | September 2024 |
Hu, et al. | Expires 5 March 2025 | [Page] |
- Workgroup:
- Network Working Group
- Internet-Draft:
- draft-ietf-lsr-isis-srv6-yang-06
- Published:
- Intended Status:
- Standards Track
- Expires:
YANG Data Model for IS-IS SRv6
Abstract
This document defines a YANG data model that can be used to configure and manage IS-IS Segment Routing over the IPv6 Data Plane.¶
Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].¶
Status of This Memo
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 5 March 2025.¶
Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
1. Overview
YANG [RFC7950] is a data definition language used to define the contents of a conceptual data store that allows networked devices to be managed using NETCONF [RFC6241]. YANG is proving relevant beyond its initial confines, as bindings to other interfaces (e.g., REST) and encodings other than XML (e.g., JSON) are being defined. Furthermore, YANG data models can be used as the basis for implementation of other interfaces, such as CLI and programmatic APIs.¶
This document defines a YANG data model that can be used to configure and manage IS-IS Segment Routing over the IPv6 Data Plane [RFC9352], and it is an augmentation to the IS-IS YANG data model [RFC9130].¶
2. IS-IS SRv6
This document defines a model for IS-IS SRv6 feature. It is an augmentation of the IS-IS base model.¶
The IS-IS SRv6 YANG module requires support for the base srv6 module[I-D.ietf-spring-srv6-yang], which defines the global srv6 configuration independent of any specific routing protocol configuration, and support of IS-IS base model [RFC9130] which defines basic IS-IS configuration and state. This module uses types defined in [RFC6991]. It also references [RFC8349], and [RFC9020].¶
The figure below describes the overall structure of the isis-srv6 YANG module:¶
module: ietf-isis-srv6 augment /rt:routing/rt:control-plane-protocols /rt:control-plane-protocol/isis:isis: +--rw srv6-cfg | +--rw enable? boolean | +--rw default-locator? boolean | +--rw locator-name* -> /rt:routing/sr:segment-routing | /srv6:srv6/locators/locator/name | +--rw persistent-end-x-sid? boolean +--rw micro-loop-avoidance +--rw srv6-enable? boolean +--rw srv6-rib-update-delay? uint16 augment /rt:routing/rt:control-plane-protocols /rt:control-plane-protocol/isis:isis/isis:fast-reroute: +--rw srv6-ti-lfa {srv6-ti-lfa}? +--rw enable? boolean augment /rt:routing/rt:control-plane-protocols /rt:control-plane-protocol/isis:isis/isis:database /isis:levels/isis:lsp/isis:router-capabilities: +--ro v6-capability | +--ro flags? identityref +--ro msd +--ro max-sl? uint8 +--ro max-end-pop? uint8 +--ro max-h_encap? uint8 +--ro max-end_d? uint8 augment /rt:routing/rt:control-plane-protocols /rt:control-plane-protocol/isis:isis/isis:database /isis:levels/isis:lsp/isis:extended-is-neighbor/isis:neighbor: +--ro srv6-adjacency-sids +--ro end-x-sid* [sid] +--ro func-flags? identityref +--ro algorithm? uint8 +--ro weight? uint8 +--ro endpoint-func | +--ro flags? identityref | +--ro endpoint-func? identityref | +--ro undefined-endpoint-func? uint16 +--ro sid srv6-sid-value +--ro neighbor-id? isis:system-id +--ro srv6-sid-structure +--ro lb-length? uint8 +--ro ln-length? uint8 +--ro fun-length? uint8 +--ro arg-length? uint8 augment /rt:routing/rt:control-plane-protocols /rt:control-plane-protocol/isis:isis/isis:database /isis:levels/isis:lsp/isis:mt-is-neighbor/isis:neighbor: +--ro srv6-adjacency-sids +--ro end-x-sid* [sid] +--ro func-flags? identityref +--ro algorithm? uint8 +--ro weight? uint8 +--ro endpoint-func | +--ro flags? identityref | +--ro endpoint-func? identityref | +--ro undefined-endpoint-func? uint16 +--ro sid srv6-sid-value +--ro neighbor-id? isis:system-id +--ro srv6-sid-structure +--ro lb-length? uint8 +--ro ln-length? uint8 +--ro fun-length? uint8 +--ro arg-length? uint8 augment /rt:routing/rt:control-plane-protocols /rt:control-plane-protocol/isis:isis/isis:database /isis:levels/isis:lsp: +--ro srv6-locators +--ro locator* [locator] +--ro mt-id? uint16 +--ro flags? identityref +--ro metric? uint32 +--ro algorithm? uint8 +--ro loc-size? uint8 +--ro locator inet:ipv6-address-no-zone +--ro srv6-end-sids | +--ro end-sid* [sid] | +--ro flags? uint8 | +--ro endpoint-func | | +--ro flags? identityref | | +--ro endpoint-func? identityref | | +--ro undefined-endpoint-func? uint16 | +--ro sid srv6-sid-value | +--ro srv6-sid-structure | +--ro lb-length? uint8 | +--ro ln-length? uint8 | +--ro fun-length? uint8 | +--ro arg-length? uint8 +--ro external-prefix-flag? boolean +--ro readvertisement-flag? boolean +--ro node-flag? boolean +--ro ipv4-source-router-id? inet:ipv4-address +--ro ipv6-source-router-id? inet:ipv6-address augment /rt:routing/rt:control-plane-protocols /rt:control-plane-protocol/isis:isis/isis:interfaces /isis:interface/isis:adjacencies/isis:adjacency: +--ro end-x-sid* [value] +--ro value srv6-sid-value +--ro weight? uint8 +--ro protection-requested? boolean +--ro persistent? boolean +--ro algorithm? uint8 +--ro endpoint-func +--ro flags? identityref +--ro endpoint-func? identityref +--ro undefined-endpoint-func? uint16¶
3. IS-IS SRv6 configuration
3.1. SRv6 activation
IS-IS SRv6 activation is achieved by setting the "enable" leaf to true. This action triggers the advertisement of SRv6 extensions according to the configuration parameters defined in the base SRv6 module.¶
3.2. Locator setting
The basic SRv6 module defines the relevant locator leaves. When the IS-IS SRv6 module is enabled, set the locator using the following approach: first, check if the default locator is being used. If it is not, then use the specified locator. This strategy is implemented by adding the "default-locator" and "locator-name" leaves. .¶
3.3. IP Fast reroute
The IS-IS SRv6 model augments the fast-reroute container in the IS-IS base module with a leaf that enables TI-LFA (Topology Independent LFA).¶
3.4. Microloop avoidance
The IS-IS SRv6 model augments the micro-loop-avoidance container. This container includes the "srv6-enable" leaf, which activates SRv6 for microloop avoidance.¶
4. IS-IS SRv6 YANG Module
<CODE BEGINS> file "ietf-isis-srv6@2024-09-01.yang" module ietf-isis-srv6 { yang-version 1.1; namespace "urn:ietf:params:xml:ns:" + "yang:ietf-isis-srv6"; prefix isis-srv6; import ietf-routing { prefix rt; reference "RFC8349: A YANG Data Model for Routing Management (NMDA Version)"; } import ietf-isis { prefix isis; reference "RFC 9130: YANG Data Model for the IS-IS Protocol"; } import ietf-inet-types { prefix inet; reference "RFC 6991:Common YANG Data Types"; } import ietf-segment-routing { prefix sr; reference "RFC 9020: YANG Data Model for Segment Routing"; } import ietf-srv6-base { prefix srv6; reference "draft-ietf-spring-srv6-yang: YANG Data Model for SRv6 Base and Static"; } organization "IETF LSR Working Group"; contact "WG Web: <http://datatracker.ietf.org/wg/lsr> WG List: <mailto:lsr@ietf.org> Author: Zhibo Hu <mailto:huzhibo@huawei.com> Author: Dan Ye <mailto:daye@cisco.com> Author: Yingzhen Qu <mailto:yingzhen.ietf@gmail.com> Author: Qiufang Ma <mailto:maqiufang1@huawei.com> "; description "The YANG module defines the configuration and operational state for IS-IS extension to support Segment Routing over IPv6 data plane. This YANG model conforms to the Network Management Datastore Architecture (NDMA) as described in RFC 8342. Copyright (c) 2024 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Revised BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info). This version of this YANG module is part of RFC XXXX (https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself for full legal notices. The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document are to be interpreted as described in BCP 14 (RFC 2119) (RFC 8174) when, and only when, they appear in all capitals, as shown here."; revision 2024-09-01 { description "Initial revision."; reference "RFC XXXX: YANG Data Model for IS-IS SRv6"; } /* Identities */ identity SRV6_END_FUNC_TYPE { description "Base identity type for srv6 endpoint function code points."; } identity SRV6_END_FUNC_PSP_USP_USD { base SRV6_END_FUNC_TYPE; description "End (May support PSP, USP, USD)."; } identity SRV6_END_X_FUNC_PSP_USP_USD { base SRV6_END_FUNC_TYPE; description "End.X(May support PSP, USP, USD)"; } identity SRV6_END_T_FUNC_PSP_USP_USD { base SRV6_END_FUNC_TYPE; description "END (May support PSP, USP, USD)"; } identity SRV6_END_FUNC_DX6 { base SRV6_END_FUNC_TYPE; description "End.DX6."; } identity SRV6_END_FUNC_DX4 { base SRV6_END_FUNC_TYPE; description "End.DX4."; } identity SRV6_END_FUNC_DT6 { base SRV6_END_FUNC_TYPE; description "End.DT6."; } identity SRV6_END_FUNC_DT4 { base SRV6_END_FUNC_TYPE; description "End.DT4."; } identity SRV6_END_FUNC_DT64 { base SRV6_END_FUNC_TYPE; description "End.DT64."; } identity SRV6_END_FUNC_OP { base SRV6_END_FUNC_TYPE; description "END.OP ."; } identity SRV6_END_FUNC_OTP { base SRV6_END_FUNC_TYPE; description "END.OTP ."; } identity srv6-capability-bit { description "Base identity for SRv6 capability sub-TLV bits."; reference "RFC 9352: IS-IS Extensions to Support Segment Routing over the IPv6 Data Plane"; } identity o-bit { base srv6-capability-bit; description "O-flag."; reference "RFC 9259: Operations, Administration, and Maintenance (OAM) in Segment Routing over IPv6 (SRv6)"; } identity srv6-end-sid-bit { description "Base identity for SRv6 End SID sub-TLV bits."; } identity srv6-locator-bit { description "Base identity for SRv6 locator TLV bits."; } identity d-bit { base srv6-locator-bit; description "D-flag. up/down bit as described in RFC 5305."; } identity srv6-endx-sid-bit { description "Base identity for SRv6 End.X SID sub-TLV bits."; } identity b-bit { base srv6-endx-sid-bit; description "B-flag. Backup flag. If set, the End.X sid is eligible for protection."; } identity s-bit { base srv6-endx-sid-bit; description "S-flag. Set flag. When set, the End.X sid refers to a set of adjacencies (and therefore May be assigned to other adjacencies as well."; } identity p-bit { base srv6-endx-sid-bit; description "P-flag. Persistent flag. When set, the End.X sid is persistently allocated, i.e., the End.x sid value remains consistent across router restart and/or interface flap."; } /* typedef */ typedef srv6-sid-value { type inet:ipv6-address-no-zone; description "16 Octets encoded sid value."; } /* Features */ feature srv6-ti-lfa { description "Enhance SRv6 FRR with ti-lfa support"; } /* Groupings */ grouping srv6-sid-structures { description "This group defines SRv6 SID Structure sub-sub-TLV."; container srv6-sid-structure { description "SRv6 SID Structure sub-sub-TLV is used to advertise the structure of the SRv6 SID as defined in RFC 8986."; leaf lb-length { type uint8; description "SRv6 SID Locator Block length in bits."; } leaf ln-length { type uint8; description "SRv6 SID Locator Node length in bits."; } leaf fun-length { type uint8; description "SRv6 SID Function length in bits."; } leaf arg-length { type uint8; description "SRv6 SID Argument length in bits."; } } } grouping srv6-capability { description "SRV6 capability grouping."; container v6-capability { description "SRv6 capability."; leaf-list flags { type identityref { base srv6-capability-bit; } description "SRv6 Capability sub-TLV flag bits list."; } } } grouping srv6-endpoint-func { description "This group defines srv6 endpoint function"; container endpoint-func { description "Srv6 Endpoint function Descriptor."; leaf-list flags { type identityref { base srv6-end-sid-bit; } description "SRv6 End SID sub-TLV flag bits list. No flags are currently being defined."; } leaf endpoint-func { type identityref { base isis-srv6:SRV6_END_FUNC_TYPE; } description "The endpoint function."; } leaf undefined-endpoint-func { type uint16; description "Unknown endpoint func value."; } } } grouping srv6-end-sid { description "SRv6 Segment Identifier(SID) with Endpoint functions."; leaf-list flags { type identityref { base srv6-end-sid-bit; } description "SRv6 end sid flags."; } uses srv6-endpoint-func; leaf sid { type srv6-sid-value; description "SRV6 sid value."; } // sub-sub-tlvs uses srv6-sid-structures; } grouping srv6-locator { description "This group defines srv6 locator tlv."; leaf mt-id { type uint16 { range "0..4095"; } description "Multitopology Identifier as defined in RFC5120."; } leaf-list flags { type identityref { base srv6-locator-bit; } description "Flags for SRv6 locator TLV."; } leaf metric { type uint32; description "Metric value."; } leaf algorithm { type uint8; description "Associated algorithm."; } leaf loc-size { type uint8; description "Number of bits in the locator field."; } leaf locator { type inet:ipv6-address-no-zone; description "Advertised SRV6 locator."; } container srv6-end-sids { description "This contains list of srv6 end sids."; list end-sid { key "sid"; description "List of SRV6 SRv6 Segment Identifiers (SID) with Endpoint functions."; uses srv6-end-sid; } } uses isis:prefix-reachability-attributes; uses isis:prefix-ipv4-source-router-id; uses isis:prefix-ipv6-source-router-id; } grouping srv6-adjacency-sid { description "SRv6 sid associated with an adjacency."; leaf-list func-flags { type identityref { base srv6-endx-sid-bit; } description "Flags for SRv6 end x SID."; } leaf algorithm { type uint8; description "Associated algorithm."; } leaf weight { type uint8; description "The value represents the weight of the End.X sid for the purpose of load balancing."; } uses srv6-endpoint-func; leaf sid { type srv6-sid-value; description "SRV6 sid value."; } leaf neighbor-id { type isis:system-id; description "Describes the system ID of the neighbor associated with the SID value. This is only used on LAN adjacencies."; } // sub-sub-tlvs uses srv6-sid-structures; } grouping srv6-adjacency-state { description "This group will extend adjacency state."; list end-x-sid { key "value"; config false; leaf value { type srv6-sid-value; description "Value of the Adj-SID."; } leaf weight { type uint8; description "Weight associated with the End.X SID."; } leaf protection-requested { type boolean; description "Set to True if the End.X SID must be protected."; } leaf persistent { type boolean; description "Persistent flag. When set, the End.X sid is persistently allocated, i.e., the End.X sid value remains consistent across router restart and/or interface flap."; } leaf algorithm { type uint8; description "Associated algorithm."; } uses srv6-endpoint-func; description "List of End.X Segment IDs."; } } /* Cfg */ augment "/rt:routing/" + "rt:control-plane-protocols/rt:control-plane-protocol" + "/isis:isis" { when "derived-from-or-self(../rt:type, 'isis:isis')" { description "This augment IS-IS routing protocol when used"; } description "This augments IS-IS protocol configuration with SRv6."; container srv6-cfg { leaf enable { type boolean; default "false"; description "Enables SRv6 protocol extensions."; } leaf default-locator { type boolean; default "false"; description "Enable IS-IS segment-routing IPv6 with default Locator."; } leaf-list locator-name { when "../default-locator = 'false'" { description "Only applies to non default locator."; } type leafref { path "/rt:routing/sr:segment-routing/srv6:srv6" + "/srv6:locators/srv6:locator/srv6:name"; } description "Enable IS-IS segment-routing IPv6 with specified Locator."; } leaf persistent-end-x-sid { type boolean; default "false"; description "Enable the persistent nature of End.X sid"; } description "Configuration about IS-IS segment-routing IPv6."; } container micro-loop-avoidance { leaf srv6-enable { type boolean; default "false"; description "Enable SRv6 avoid-microloop.Depend on SR IPv6 Enable."; } leaf srv6-rib-update-delay { type uint16 { range "1000..10000"; } units "ms"; default "5000"; description "Set the route delivery delay for SRv6 avoid-microloop. Depend on SR IPv6 Enable."; } description "Enable IS-IS avoid-microloop."; } } augment "/rt:routing/" + "rt:control-plane-protocols/rt:control-plane-protocol" + "/isis:isis/isis:fast-reroute" { when "derived-from-or-self(../../rt:type, 'isis:isis')" { description "This augment IS-IS routing protocol when used"; } description "This augments IS-IS IPFRR with IPV6 TILFA."; container srv6-ti-lfa { if-feature "srv6-ti-lfa"; leaf enable { type boolean; description "Enables SRv6 TI-LFA computation."; } description "SRv6 TI-LFA configuration."; } } /* Operational states */ augment "/rt:routing/" + "rt:control-plane-protocols/rt:control-plane-protocol" + "/isis:isis/isis:database/isis:levels/isis:lsp" + "/isis:router-capabilities" { when "derived-from-or-self(../../../../../rt:type, 'isis:isis')" { description "This augment IS-IS routing protocol when used"; } description "This augments IS-IS protocol router capability."; uses srv6-capability; uses srv6:srv6-msd-signaled; } augment "/rt:routing/" + "rt:control-plane-protocols/rt:control-plane-protocol" + "/isis:isis/isis:database/isis:levels/isis:lsp" + "/isis:extended-is-neighbor/isis:neighbor" { when "derived-from-or-self(../../../../../../rt:type," + "'isis:isis')" { description "This augment IS-IS routing protocol when used."; } description "This augments IS-IS protocol neighbor."; container srv6-adjacency-sids { description "This defines svr6 end-x sids for the adjacency."; list end-x-sid { key "sid"; uses srv6-adjacency-sid; description "List of end-x sids."; } } } augment "/rt:routing/" + "rt:control-plane-protocols/rt:control-plane-protocol" + "/isis:isis/isis:database/isis:levels/isis:lsp" + "/isis:mt-is-neighbor/isis:neighbor" { when "derived-from-or-self(../../../../../../rt:type," + "'isis:isis')" { description "This augment IS-IS routing protocol when used."; } description "This augments IS-IS protocol neighbor."; container srv6-adjacency-sids { description "This defines svr6 end-x sids for the adjacency."; list end-x-sid { key "sid"; uses srv6-adjacency-sid; description "List of end-x sids."; } } } augment "/rt:routing/" + "rt:control-plane-protocols/rt:control-plane-protocol" + "/isis:isis/isis:database/isis:levels/isis:lsp" { when "derived-from-or-self(../../../../rt:type, 'isis:isis')" { description "This augment IS-IS routing protocol when used."; } description "This augments IS-IS protocol LSDB."; container srv6-locators { description "This defines srv6 locator tlvs."; list locator { key "locator"; uses srv6-locator; description "List of srv6 locators."; } } } augment "/rt:routing/" + "rt:control-plane-protocols/rt:control-plane-protocol" + "/isis:isis/isis:interfaces/isis:interface" + "/isis:adjacencies/isis:adjacency" { when "derived-from-or-self(../../../../../rt:type," + "'isis:isis')" { description "This augment IS-IS routing protocol when used."; } description "This augments IS-IS protocol operational state with segment routing."; uses srv6-adjacency-state; } /* Notifications */ } <CODE ENDS>¶
5. Security Considerations
The YANG modules specified in this document define a schema for data that is designed to be accessed via network management protocols such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC8446].¶
The Network Configuration Access Control Model (NACM) [RFC8341] provides the means to restrict access for particular NETCONF or RESTCONF users to a pre-configured subset of all available NETCONF or RESTCONF protocol operations and content.¶
There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability:¶
Writable data nodes represent the configuration of IS-IS SRv6, micro-loop avoidance and ti-lfa enablement. The ability to modify IS-IS SRv6 related configuration may allow the entire IS-IS domain to be compromised, and traffic could be hijacked.¶
Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability:¶
- /isis:lsp/isis:router-capabilities/v6-capability¶
- /isis:lsp/isis:router-capabilities/srv6-msd¶
- /isis:lsp/isis:extended-is-neighbor/isis:neighbor/srv6-adjacency-sids¶
- /isis:lsp/isis:mt-is-neighbor/isis:neighbor/srv6-adjacency-sids¶
- /isis:lsp/srv6-locators¶
- /isis:interface/isis:adjacencies/isis:adjacency/end-x-sid¶
Exposure of the LSDB will expose the detailed topology of the network and router capabilities, and may facilitate other attacks.¶
6. Contributors
Jiajia Dong Huawei China Email:dongjiajia@huawei.com¶
7. Acknowledgements
TBD.¶
8. IANA Considerations
The IANA is requested to assign two new URIs from the IETF XML registry ([RFC3688]). Authors are suggesting the following URI:¶
URI: urn:ietf:params:xml:ns:yang:ietf-isis-srv6 Registrant Contact: IS-IS WG XML: N/A, the requested URI is an XML namespace¶
This document also requests one new YANG module name in the YANG Module Names registry ([RFC6020]) with the following suggestion :¶
name: ietf-isis-srv6 namespace: urn:ietf:params:xml:ns:yang:ietf-isis-srv6 prefix: isis-srv6 reference: RFC XXXX¶
9. References
9.1. Normative References
- [I-D.ietf-spring-srv6-yang]
- Raza, S., Agarwal, S., Liu, X., Hu, Z., Hussain, I., Shah, H. C., Voyer, D., Matsushima, S., Horiba, K., Rajamanickam, J., and A. Abdelsalam, "YANG Data Model for SRv6 Base and Static", Work in Progress, Internet-Draft, draft-ietf-spring-srv6-yang-02, , <https://www.ietf.org/archive/id/draft-ietf-spring-srv6-yang-02.txt>.
- [RFC2119]
- Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
- [RFC3688]
- Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, , <https://www.rfc-editor.org/info/rfc3688>.
- [RFC6020]
- Bjorklund, M., Ed., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, , <https://www.rfc-editor.org/info/rfc6020>.
- [RFC6241]
- Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, , <https://www.rfc-editor.org/info/rfc6241>.
- [RFC6242]
- Wasserman, M., "Using the NETCONF Protocol over Secure Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, , <https://www.rfc-editor.org/info/rfc6242>.
- [RFC6991]
- Schoenwaelder, J., Ed., "Common YANG Data Types", RFC 6991, DOI 10.17487/RFC6991, , <https://www.rfc-editor.org/info/rfc6991>.
- [RFC7950]
- Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, , <https://www.rfc-editor.org/info/rfc7950>.
- [RFC8040]
- Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, , <https://www.rfc-editor.org/info/rfc8040>.
- [RFC8341]
- Bierman, A. and M. Bjorklund, "Network Configuration Access Control Model", STD 91, RFC 8341, DOI 10.17487/RFC8341, , <https://www.rfc-editor.org/info/rfc8341>.
- [RFC8349]
- Lhotka, L., Lindem, A., and Y. Qu, "A YANG Data Model for Routing Management (NMDA Version)", RFC 8349, DOI 10.17487/RFC8349, , <https://www.rfc-editor.org/info/rfc8349>.
- [RFC8446]
- Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, , <https://www.rfc-editor.org/info/rfc8446>.
- [RFC9020]
- Litkowski, S., Qu, Y., Lindem, A., Sarkar, P., and J. Tantsura, "YANG Data Model for Segment Routing", RFC 9020, DOI 10.17487/RFC9020, , <https://www.rfc-editor.org/info/rfc9020>.
- [RFC9130]
- Litkowski, S., Yeung, D., Lindem, A., Zhang, J., and L. Lhotka, "YANG Data Model for IS-IS Protocol", RFC 9130, DOI 10.17487/RFC9130, , <https://www.rfc-editor.org/info/rfc9130>.
- [RFC9352]
- Psenak, P., Filsfils, C., Bashandy, A., Decraene, B., and Z. Hu, "IS-IS Extensions to Support Segment Routing over the IPv6 Dataplane", RFC 9352, DOI 10.17487/RFC9352, , <https://www.rfc-editor.org/info/rfc9352>.
Appendix A. Configuration examples
The following is an XML example using IS-IS SRv6 YANG module.¶
<routing xmlns="urn:ietf:params:xml:ns:yang:ietf-routing"> <control-plane-protocols> <control-plane-protocol> <isis xmlns="urn:ietf:params:xml:ns:yang:ietf-isis"> <srv6-cfg> <enable>true</enable> <default-locator>false</default-locator> <locator-name>DOM0_ALG0</locator-name> <persistent-end-x-sid>true</persistent-end-x-sid> </srv6-cfg> <micro-loop-avoidance> <srv6-enable>true</srv6-enable> <srv6-rib-update-delay>2000</srv6-rib-update-delay> </micro-loop-avoidance> </isis> </control-plane-protocol> </control-plane-protocols> </routing> <routing xmlns="urn:ietf:params:xml:ns:yang:ietf-routing"> <control-plane-protocols> <control-plane-protocol> <isis xmlns="urn:ietf:params:xml:ns:yang:ietf-isis"> <fast-reroute> <srv6-ti-lfa> <enable>true</enable> </srv6-ti-lfa> </fast-reroute> </isis> </control-plane-protocol> </control-plane-protocols> </routing>¶
The following is the corresponding example using JSON format.¶
{ "control-plane-protocols": { "control-plane-protocol": { "isis": { "srv6-cfg": { "enable": "true", "default-locator": "false", "locator-name": "DOM0_ALG0", "persistent-end-x-sid": "true" }, "micro-loop-avoidance": { "srv6-enable": "true", "srv6-rib-update-delay": "2000" } } } } } { "control-plane-protocols": { "control-plane-protocol": { "isis": { "fast-reroute": { "srv6-ti-lfa": { "enable": "true" } } } } } }¶