Networking Working Group                                JP. Vasseur, Ed.
Internet-Draft                                        Cisco Systems, Inc
Intended status: Standards Track                       Matthew. R. Meyer
Expires: February 19, 2009                               Global Crossing
                                                               K. Kumaki
                                                        KDDI Corporation
                                                   Alberto. Tempia Bonda
                                                          Telecom Italia
                                                         August 18, 2008


 A Link-Type sub-TLV to convey the number of Traffic Engineering Label
  Switched Paths signalled with zero reserved bandwidth across a link
                 draft-ietf-mpls-number-0-bw-te-lsps-10

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on February 19, 2009.

Abstract

   Several Link-type sub-TLVs have been defined for OSPF and IS-IS in
   the context of Multiprotocol Label Switching (MPLS) Traffic
   Engineering (TE) in order to advertise some link characteristics such
   as the available bandwidth, traffic engineering metric,
   administrative group and so on.  By making statistical assumption
   about the aggregated traffic carried onto a set of TE Label Switched



Vasseur, et al.         Expires February 19, 2009               [Page 1]


Internet-Draft   draft-ietf-mpls-number-0-bw-te-lsps-10      August 2008


   Paths (LSPs) signalled with zero bandwith (referred to as
   unconstrained TE LSP in this document), and with the knowledge of the
   number of unconstrained TE LSPs signalled across a link, algorithms
   can be designed to load balance (existing or newly configured)
   unconstrained TE LSP across a set of equal cost paths.  This requires
   knowledge of the number of unconstrained TE LSPs signalled across a
   link.  This document specifies a new Link-type Traffic Engineering
   sub-TLV used to advertise the number of unconstrained TE LSP(s)
   signalled across a link.

Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].


Table of Contents

   1.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   3.  Protocol extensions . . . . . . . . . . . . . . . . . . . . . . 4
     3.1.  IS-IS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
     3.2.  OSPF  . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
   4.  Elements of procedure . . . . . . . . . . . . . . . . . . . . . 5
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 5
   6.  Security Considerations . . . . . . . . . . . . . . . . . . . . 6
   7.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . 6
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 6
     8.1.  Normative References  . . . . . . . . . . . . . . . . . . . 6
     8.2.  Informative References  . . . . . . . . . . . . . . . . . . 7
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . . . 7
   Intellectual Property and Copyright Statements  . . . . . . . . . . 9


















Vasseur, et al.         Expires February 19, 2009               [Page 2]


Internet-Draft   draft-ietf-mpls-number-0-bw-te-lsps-10      August 2008


1.  Terminology

   Terminology used in this document

   CSPF: Constrained Shortest Path First

   IGP : Interior Gateway Protocol

   LSA: Link State Advertisement

   LSP: Link State Packet

   MPLS: Multiprotocol Label Switching

   LSR: Label Switching Router

   SRLG: Shared Risk Link Group

   TE LSP: Traffic Engineering Label Switched Path

   Unconstrained TE LSP: A TE LSP signalled with a bandwidth equal to 0


2.  Introduction

   It is not uncommon to deploy MPLS Traffic Engineering for the sake of
   fast recovery relying on a local protection recovery mechanism such
   as MPLS TE Fast Reroute (see [RFC4090]).  In this case, a deployment
   model consists of deploying a full mesh of TE LSPs signalled with
   zero bandwidth (also referred to as unconstrained TE LSP in this
   document) between a set of LSRs (Label Switching Routers) and
   protecting these TE LSPs against link, SRLG (Shared Risk Link Group)
   and/or node failures with pre-established backup tunnels.  The
   traffic routed onto such unconstrained TE LSPs simply follows the IGP
   shortest path (since the TE LSP computed by the path computation
   algorithm (e.g.  CSPF) will be no different than the IGP (Interior
   Gateway Protocol) shortest path should the TE metric be equal to the
   IGP metric) but is protected with MPLS TE Fast Reroute.

   When a reoptimization process is triggered for an existing TE LSP,
   the decision on whether to reroute that TE LSP onto a different path
   is governed by the discovery of a lower cost path satisfying the
   constraints (other metric such that the percentage of reserved
   bandwidth or the number of hops can also be used).  Unfortunately,
   for instance in the presence of ECMPs (Equal Cost Multi-Paths) in
   symmetrical networks when unconstrained TE LSPs are used, such
   metrics (e.g. path cost, number of hops, ...) are usually ineffective
   and may lead to poorly load balanced traffic.



Vasseur, et al.         Expires February 19, 2009               [Page 3]


Internet-Draft   draft-ietf-mpls-number-0-bw-te-lsps-10      August 2008


   By making statistical assumptions about the aggregated traffic
   carried by a set of TE LSPs signalled with no bandwidth requirement
   (referred to as unconstrained TE LSPs in this document), algorithms
   can be designed to load balance (existing or newly configured)
   unconstrained TE Label Switched Paths (LSPs) across a set of equal
   cost paths.  This requires knowledge of the number of unconstrained
   Traffic Engineering Label Switched Paths (TE LSPs) signalled across
   each link.

   Note that the specification of load balancing algorithms is outside
   the scope of this document and is referred to for the sake of
   illustration of the motivation for gathering such information.

   Furthermore, the knowledge of the number of unconstrained TE LSPs
   signalled across each link can be used for other purposes (for
   example to evaluate the number of affected unconstrained TE LSPs in
   case of a link failure).

   A set of Link-type sub-TLVs have been defined for OSPF and IS-IS (see
   [RFC3630] and [RFC3784]) in the context of MPLS Traffic Engineering
   in order to advertise various link characteristics such as the
   available bandwidth, traffic engineering metric, administrative group
   and so on.  As currently defined in [RFC3630] and [RFC3784] the
   information related to the number of unconstrained TE LSP(s) is not
   available.  This document specifies a new Link-type Traffic
   Engineering sub-TLV used to indicate the number of unconstrained TE
   LSPs signalled across a link.

   Unconstrained TE LSPs that are configured and provisioned through a
   management system MAY be omitted from the count that is reported.


3.  Protocol extensions

   Two Unconstrained TE LSP count sub-TLVs are defined that specify the
   number of TE LSPs signalled with zero bandwidth across a link.

3.1.  IS-IS

   The IS-IS Unconstrained TE LSP Count Sub-TLV is OPTIONAL and MUST NOT
   appear more than once within the extended IS reachability TLV (type
   22) specified in [RFC3784] or the MT Intermediate Systems TLV (type
   222) specified in [RFC5120].  If a second instance of the
   Unconstrained TE LSP Count sub-TLV is present, the receiving system
   MUST only process the first instance of the sub-TLV.

   The IS-IS Unconstrained TE LSP Count Sub-TLV format is defined below:




Vasseur, et al.         Expires February 19, 2009               [Page 4]


Internet-Draft   draft-ietf-mpls-number-0-bw-te-lsps-10      August 2008


   Type (1 octet): To be assigned by IANA (suggested value = 23)

   Length (1 octet): 2

   Value (2 octets): number of unconstrained TE LSP(s) signalled across
   the link.

3.2.  OSPF

   The OSPF Unconstrained TE LSP Count TLV is OPTIONAL and MUST NOT
   appear more than once within the Link TLV (Type 2) that is itself
   carried within the Traffic Engineering LSA specified in [RFC3630] or
   the OSPFv3 Intra-Area-TE LSA (function code 10) defined in
   [I-D.ietf-ospf-ospfv3-traffic].  If a second instance of the
   Unconstrained TE LSP Count sub-TLV is present, the receiving system
   MUST only process the first instance of the sub-TLV.

   The OSPF Unconstrained TE LSP Count Sub-TLV format is defined below:

   Type (2 octets): To be assigned by IANA (suggested value = 23)

   Length (2 octets): 4

   Value (4 octets): number of unconstrained TE LSP(s) signalled across
   the link.


4.  Elements of procedure

   The absence of the Unconstrained TE LSP Count (sub-)TLV should be
   interpreted as an absence of information about the link.

   Similarly to other MPLS Traffic Engineering link characteristics,
   LSA/LSP origination trigger mechanisms are outside the scope of this
   document.


5.  IANA Considerations

   IANA has defined a sub-registry for the sub-TLVs carried in the IS-IS
   TLV 22.  IANA is requested to assign a new TLV code-point for the
   Unconstrained TE LSP Count sub-TLV carried within the TLV 22.









Vasseur, et al.         Expires February 19, 2009               [Page 5]


Internet-Draft   draft-ietf-mpls-number-0-bw-te-lsps-10      August 2008


   Suggested Value  TLV Name                               Reference

        23          Unconstrained TE LSP Count (sub-)TLV   This document


   IANA has defined a sub-registry for the sub-TLVs carried in an OSPF
   TE Link TLV (type 2).  IANA is requested to assign a new sub-TLV
   code-point for the Unconstrained TE LSP Count sub-TLV carried within
   the TE Link TLV.

   Suggested Value  TLV Name                               Reference

        23          Unconstrained TE LSP Count (sub-)TLV   This document



6.  Security Considerations

   The function described in this document does not create any new
   security issues for the OSPF and the IS-IS protocols.  Security
   considerations are covered in [RFC2328] and [RFC2470] for the base
   OSPF protocol and in [RFC1195] for IS-IS.


7.  Acknowledgements

   The authors would like to thank Jean-Louis Le Roux, Adrian Farrel,
   Daniel King, Acee Lindem, Lou Berger, Attila Takacs and Loa Anderson
   for their useful inputs.


8.  References

8.1.  Normative References

   [I-D.ietf-ospf-ospfv3-traffic]
              Ishiguro, K., Manral, V., Davey, A., and A. Lindem,
              "Traffic Engineering Extensions to OSPF version 3",
              draft-ietf-ospf-ospfv3-traffic-13 (work in progress),
              June 2008.

   [RFC1195]  Callon, R., "Use of OSI IS-IS for routing in TCP/IP and
              dual environments", RFC 1195, December 1990.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2328]  Moy, J., "OSPF Version 2", STD 54, RFC 2328, April 1998.



Vasseur, et al.         Expires February 19, 2009               [Page 6]


Internet-Draft   draft-ietf-mpls-number-0-bw-te-lsps-10      August 2008


   [RFC2470]  Crawford, M., Narten, T., and S. Thomas, "Transmission of
              IPv6 Packets over Token Ring Networks", RFC 2470,
              December 1998.

   [RFC3630]  Katz, D., Kompella, K., and D. Yeung, "Traffic Engineering
              (TE) Extensions to OSPF Version 2", RFC 3630,
              September 2003.

   [RFC3784]  Smit, H. and T. Li, "Intermediate System to Intermediate
              System (IS-IS) Extensions for Traffic Engineering (TE)",
              RFC 3784, June 2004.

8.2.  Informative References

   [RFC4090]  Pan, P., Swallow, G., and A. Atlas, "Fast Reroute
              Extensions to RSVP-TE for LSP Tunnels", RFC 4090,
              May 2005.

   [RFC5120]  Przygienda, T., Shen, N., and N. Sheth, "M-ISIS: Multi
              Topology (MT) Routing in Intermediate System to
              Intermediate Systems (IS-ISs)", RFC 5120, February 2008.


Authors' Addresses

   JP Vasseur (editor)
   Cisco Systems, Inc
   1414 Massachusetts Avenue
   Boxborough, MA  01719
   USA

   Email: jpv@cisco.com


   Matthew R. Meyer
   Global Crossing
   3133 Indian Valley Tr.
   Howell, MI  48855
   USA

   Email: mrminc@gmail.com










Vasseur, et al.         Expires February 19, 2009               [Page 7]


Internet-Draft   draft-ietf-mpls-number-0-bw-te-lsps-10      August 2008


   Kenji Kumaki
   KDDI Corporation
   Garden Air Tower Iidabashi, Chiyoda-ku,
   Tokyo,   102-8460
   JAPAN

   Email: ke-kumaki@kddi.com


   Alberto Tempia Bonda
   Telecom Italia
   via G. Reiss Romoli 274
   Torino,   10148
   ITALIA

   Email: alberto.tempiabonda@telecomitalia.it



































Vasseur, et al.         Expires February 19, 2009               [Page 8]


Internet-Draft   draft-ietf-mpls-number-0-bw-te-lsps-10      August 2008


Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.











Vasseur, et al.         Expires February 19, 2009               [Page 9]