Network Working Group                                         T. Goddard
Internet-Draft                                 ICEsoft Technologies Inc.
Expires: July 2, 2005                                       January 2005

   Using the Network Configuration Protocol (NETCONF) Over the Simple
                     Object Access Protocol (SOAP)

Status of this Memo

   This document is an Internet-Draft and is subject to all provisions
   of section 3 of RFC 3667.  By submitting this Internet-Draft, each
   author represents that any applicable patent or other IPR claims of
   which he or she is aware have been or will be disclosed, and any of
   which he or she become aware will be disclosed, in accordance with
   RFC 3668.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at

   The list of Internet-Draft Shadow Directories can be accessed at

   This Internet-Draft will expire on July 2, 2005.

Copyright Notice

   Copyright (C) The Internet Society (2005).


   The Network Configuration Protocol (NETCONF) is applicable to a wide
   range of devices in a variety of environments.  The emergence of Web
   Services gives one such environment, and is presently characterized
   by the use of the Simple Object Access Protocol (SOAP).  NETCONF
   finds many benefits in this environment: from the re-use of existing
   standards, to ease of software development, to integration with
   deployed systems.  Herein, we describe SOAP over HTTP and SOAP over

Goddard                   Expires July 2, 2005                  [Page 1]

Internet-Draft             NETCONF Over SOAP                January 2005

   BEEP bindings for NETCONF.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  SOAP Background for NETCONF  . . . . . . . . . . . . . . . . .  4
     2.1   Use and Storage of WSDL and XSD  . . . . . . . . . . . . .  4
     2.2   SOAP over HTTP . . . . . . . . . . . . . . . . . . . . . .  5
     2.3   HTTP Drawbacks . . . . . . . . . . . . . . . . . . . . . .  5
     2.4   BCP56: On the Use of HTTP as a Substrate . . . . . . . . .  6
     2.5   Important HTTP 1.1 Features  . . . . . . . . . . . . . . .  6
     2.6   SOAP Over BEEP . . . . . . . . . . . . . . . . . . . . . .  7
     2.7   SOAP Implementation Considerations . . . . . . . . . . . .  7
       2.7.1   SOAP Feature Exploitation  . . . . . . . . . . . . . .  7
       2.7.2   SOAP Headers . . . . . . . . . . . . . . . . . . . . .  8
       2.7.3   SOAP Faults  . . . . . . . . . . . . . . . . . . . . .  8
   3.  A SOAP Service for NETCONF . . . . . . . . . . . . . . . . . . 10
     3.1   Fundamental Use Case . . . . . . . . . . . . . . . . . . . 10
     3.2   NETCONF Session Establishment  . . . . . . . . . . . . . . 10
     3.3   NETCONF Capabilities Exchange  . . . . . . . . . . . . . . 10
     3.4   NETCONF Session Usage  . . . . . . . . . . . . . . . . . . 10
     3.5   NETCONF Session Teardown . . . . . . . . . . . . . . . . . 11
     3.6   A NETCONF Over SOAP example  . . . . . . . . . . . . . . . 11
     3.7   NETCONF SOAP WSDL  . . . . . . . . . . . . . . . . . . . . 12
     3.8   Sample Service Definition WSDL . . . . . . . . . . . . . . 14
   4.  Security Considerations  . . . . . . . . . . . . . . . . . . . 16
     4.1   Integrity, Privacy, and Authentication . . . . . . . . . . 16
     4.2   Vulnerabilities  . . . . . . . . . . . . . . . . . . . . . 16
     4.3   Environmental Specifics  . . . . . . . . . . . . . . . . . 17
   5.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 18
   6.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 19
   6.1   Normative References . . . . . . . . . . . . . . . . . . . . 19
   6.2   Informative References . . . . . . . . . . . . . . . . . . . 20
       Author's Address . . . . . . . . . . . . . . . . . . . . . . . 21
       Intellectual Property and Copyright Statements . . . . . . . . 22

Goddard                   Expires July 2, 2005                  [Page 2]

Internet-Draft             NETCONF Over SOAP                January 2005

1.  Introduction

   Given the use of XML [2] and the remote procedure call
   characteristics, it is natural to consider a binding of the NETCONF
   [1] operations to a SOAP [3] application protocol.  This document
   proposes a binding of this form.

   In general, SOAP is a natural messaging scheme for NETCONF,
   essentially because of the remote procedure call character of both.
   However, care must be taken with SOAP over HTTP as it is inherently
   synchronous and client-driven.  SOAP over BEEP [15] is technically
   superior, but is not as widely adopted.

   Four basic topics are presented: SOAP specifics of interest to
   NETCONF, specifics on implementing NETCONF as a SOAP-based web
   service, security considerations, and an appendix with functional
   WSDL.  In some sense, the most important part of the document is the
   brief WSDL document presented in Section 3.7.  With the right tools,
   the WSDL combined with the base NETCONF XML Schemas provide machine
   readable descriptions sufficient for the development of software
   applications using NETCONF.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   document are to be interpreted as described in RFC 2119 [11]

Goddard                   Expires July 2, 2005                  [Page 3]

Internet-Draft             NETCONF Over SOAP                January 2005

2.  SOAP Background for NETCONF

   Why introduce SOAP as yet another wrapper around what is already a
   remote procedure call message?  There are, in fact, both technical
   and practical reasons.  The technical reasons are perhaps less
   compelling, but let's examine them first.

   The use of SOAP does offer a few technical advantages.  SOAP is
   fundamentally an XML messaging scheme (which is capable of supporting
   remote procedure call) and it defines a simple message format
   composed of a "header" and a "body" contained within an "envelope".
   The "header" contains meta-information relating to the message, and
   can be used to indicate such things as store-and-forward behaviour or
   transactional characteristics.  In addition, SOAP specifies an
   optional encoding for the "body" of the message.  However, this
   encoding is not applicable to NETCONF as one of the goals is to have
   highly readable XML, and SOAP-encoding is optimized instead for ease
   of automated deserialization.  These benefits of the SOAP message
   structure are simple, but worthwhile due to the fact that they are
   already standardized.

   It is the practical reasons that truly make SOAP an interesting
   choice for device management.  It is not difficult to invent a
   mechanism for exchanging XML messages over TCP, but what is difficult
   is getting that mechanism supported in a wide variety of tools and
   operating systems and having that mechanism understood by a great
   many developers.  SOAP over HTTP (with WSDL) is seeing good success
   at this, and this means that a device management protocol making use
   of these technologies has advantages in being implemented and
   adopted.  Admittedly, there are interoperability problems with SOAP
   and WSDL, but such problems have wide attention and can be expected
   to be resolved.

2.1  Use and Storage of WSDL and XSD

   One of the advantages of using machine readable formats such as Web
   Services Description Language (WSDL) [4] and XML Schemas [5] is that
   they can be used automatically in the software development process.
   With appropriate tools, WSDL and XSD can be used to generate classes
   that act as remote interfaces or application specific data
   structures.  Other uses, such as document generation and service
   location, are also common.  A great innovation found with many
   XML-based definition languages is the use of hyperlinks for referring
   to documents containing supporting definitions.

     <import namespace="urn:ietf:params:xml:ns:netconf:base:1.0"
                       schema/netconf-base_1.0.xsd" />

Goddard                   Expires July 2, 2005                  [Page 4]

Internet-Draft             NETCONF Over SOAP                January 2005

   For instance, in WSDL, the above import statement imports the
   definitions of XML types and elements from the base NETCONF schema.
   Ideally, the file containing that schema is hosted on a web server
   under the authority of the standards body that defined the schema.
   In this way, dependent standards can be built up over time and all
   are accessible to automated software tools that ensure adherence to
   the standards.  The IANA maintained registry for this purpose is
   described in The IETF XML Registry [17].

   Note that WSDL declarations for SOAP over BEEP bindings are not yet

2.2  SOAP over HTTP

   While it is true that SOAP focuses on messages and can be bound to
   different underlying protocols such as HTTP, SMTP, or BEEP, most
   existing SOAP implementations support only HTTP or HTTP/TLS.

   There are a number of advantages to considering SOAP over protocols
   other than HTTP, as HTTP assigns the very distinct client and server
   roles by connection initiation.  This causes difficulties in
   supporting asynchronous notification and can be relieved in many ways
   by replacing HTTP with BEEP.

2.3  HTTP Drawbacks

   HTTP is not the ideal transport for messaging, but it is adequate for
   the most basic interpretation of "remote procedure call".  HTTP is
   based on a communication pattern whereby the client (which initiates
   the TCP connection) makes a "request" to the server.  The server
   returns a "response" and this process is continued (possibly over a
   persistent connection, as described below).  This matches the basic
   idea of a remote procedure call where the caller invokes a procedure
   on a remote server and waits for the return value.

   Potential criticisms of HTTP could include the following:
   o  server-initiated data flow is awkward to provide
   o  headers are verbose and text-based
   o  idle connections may be closed by intermediate proxies
   o  data encapsulation must adhere to MIME
   o  bulk transfer relies on stream-based ordering

   In many ways these criticisms are directed at particular compromises
   in the design of HTTP.  As such, they are important to consider, but
   it is not clear that they result in fatal drawbacks for a device
   management protocol.

Goddard                   Expires July 2, 2005                  [Page 5]

Internet-Draft             NETCONF Over SOAP                January 2005

2.4  BCP56: On the Use of HTTP as a Substrate

   Best Current Practice 56 [9] presents a number of important
   considerations on the use of HTTP in application protocols.  In
   particular, it raises the following concerns:
   o  HTTP may be more complex than is necessary for the application
   o  The use of HTTP may mask the application from some firewalls
   o  A substantially new service should not re-use port 80 as assigned
      to HTTP
   o  HTTP caching may mask connection state

   Fundamentally, these concerns lie directly with SOAP over HTTP,
   rather than the application of SOAP over HTTP to NETCONF.  As BCP 56
   indicates, it is debatable whether HTTP is an appropriate protocol
   for SOAP at all, and it is likely that BEEP would be a superior
   protocol for most SOAP applications.  Unfortunately, SOAP over HTTP
   is in common use and must be supported if the practical benefits of
   SOAP are to be realized.  Note that the verbose nature of SOAP
   actually makes it more readily processed by firewalls, albeit
   firewalls designed to process SOAP messages.

   HTTP caches SHOULD NOT be inserted between NETCONF managers and
   agents as NETCONF session state is tied to the state of the
   underlying transport connection.  Three defensive actions can be
   o  Caching MUST be prohibited through the use of HTTP headers
      Cache-Control and Pragma: no-cache
   o  HTTP proxies SHOULD NOT be deployed within the management network
   o  Use HTTPS

   It is also possible to respond to the concern on the re-use of port
   80.  A NETCONF SOAP service can be offered on any desired port, and
   it is recommended that a new standard port for SOAP over HTTP, or a
   new standard port for NETCONF over SOAP (over HTTP) be defined, as
   requested in the IANA considerations of this document.

2.5  Important HTTP 1.1 Features

   HTTP 1.1 [8] includes two important features that provide for
   relatively efficient transport of SOAP messages.  These features are
   "persistent connections" and "chunked transfer-coding".

   Persistent connections allow a single TCP connection to be used
   across multiple HTTP requests.  This permits multiple SOAP request/
   response message pairs to be exchanged without the overhead of
   creating a new TCP connection for each request.  Given that a single
   stream is used for both requests and responses, it is clear that some
   form of framing is necessary.  For messages whose length is known in

Goddard                   Expires July 2, 2005                  [Page 6]

Internet-Draft             NETCONF Over SOAP                January 2005

   advance, this is handled by the HTTP header "Content-length".  For
   messages of dynamic length, "Chunking" is required.

   HTTP "Chunking" or "chunked transfer-coding" allows the sender to
   send an indefinite amount of binary data.  This is accomplished by
   informing the receiver of the size of each "chunk" (substring of the
   data) before the chunk is transmitted.  The last chunk is indicated
   by a chunk of zero length.  Chunking can be effectively used to
   transfer a large XML document where the document is generated on-line
   from a non-XML form in memory.

   In terms of application to SOAP message exchanges, persistent
   connections are clearly important for performance reasons, and are
   particularly important when it is the persistence of authenticated
   connections that is at stake.  When one considers that messages of
   dynamic length are the rule rather than the exception for SOAP
   messages, it is also clear that Chunking is very useful.  In some
   cases it is possible to buffer a SOAP response and determine its
   length before sending, but the storage requirements for this are
   prohibitive for many devices.  Together, these two features provide a
   good foundation for device management using SOAP over HTTP.  HTTP
   chunking and persistent connections SHOULD be used.

2.6  SOAP Over BEEP

   Although not widely adopted by the Web Services community, BEEP is an
   excellent substrate for SOAP [16].  In particular, it provides for
   request/response message exchanges initiated by either BEEP peer and
   allows the number of response messages to be arbitrary (including
   zero).  The BEEP profile for SOAP simply makes use of a single BEEP
   channel for exchanging SOAP messages and benefits from BEEP's
   inherent strengths for message exchange over a single transport

2.7  SOAP Implementation Considerations

   It is not the goal of this document to cover the SOAP [3]
   specification in detail.  Instead, we provide a few comments that may
   be of interest to an implementor of NETCONF over SOAP.

2.7.1  SOAP Feature Exploitation

   NETCONF over SOAP does not make extensive use of SOAP features.  For
   instance, NETCONF operations are not broken into SOAP message parts,
   and the SOAP header is not used to convey <rpc> metadata.  This is a
   deliberate design decision as it allows the implementor to easily
   provide NETCONF over multiple substrates while handling the messages
   over those different substrates in a common way.

Goddard                   Expires July 2, 2005                  [Page 7]

Internet-Draft             NETCONF Over SOAP                January 2005

2.7.2  SOAP Headers

   Implementors of NETCONF over SOAP should be aware of the following
   characteristic of SOAP headers: a SOAP header may have the attribute
   "mustUnderstand" and, if so, the recipient must either process the
   header block or not process the SOAP message at all, and instead
   generate a fault.  A "mustUnderstand" header must not be silently

   In general, however, SOAP headers are intended for
   application-specific uses.  The NETCONF SOAP binding does not make
   use of SOAP headers.

2.7.3  SOAP Faults

   A SOAP Fault is returned in the event of a NETCONF <rpc-error>.  It
   is constructed essentially as a wrapper for the <rpc-error>, but
   allow SOAP processors to propagate the <rpc-error> to application
   code using a language-appropriate exception mechanism.

   A SOAP Fault is constructed from an <rpc-error> as follows: the SOAP
   Fault faultcode is "Client" in the SOAP envelope namespace, the SOAP
   Fault faultstring is the contents of the NETCONF <rpc-error>
   "error-tag", and the SOAP Fault detail is the original <rpc-error>

   For instance, given the following <rpc-error>,

          <rpc-error xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

    the associated SOAP Fault message is

Goddard                   Expires July 2, 2005                  [Page 8]

Internet-Draft             NETCONF Over SOAP                January 2005

               <rpc-error xmlns=

Goddard                   Expires July 2, 2005                  [Page 9]

Internet-Draft             NETCONF Over SOAP                January 2005

3.  A SOAP Service for NETCONF

3.1  Fundamental Use Case

   The fundamental use case for NETCONF over SOAP is that of a
   management console ("manager" role) managing one or more devices
   running NETCONF agents ("agent" role).  The manager initiates an HTTP
   or BEEP connection to an agent and drives the NETCONF session via a
   sequence of SOAP messages.  When the manager closes the connection,
   the NETCONF session is also closed.

3.2  NETCONF Session Establishment

   A NETCONF over SOAP session is established by the initial message
   exchange on the underlying substrate.  For HTTP, a NETCONF session is
   established once a SOAP message is POSTed to the NETCONF web
   application URI.  For BEEP, a NETCONF session is established once the
   BEEP profile for SOAP handshake establishes the SOAP channel.

3.3  NETCONF Capabilities Exchange

   Capabilities exchange is performed through the exchange of <hello>
   messages.  In the case of SOAP over HTTP, the HTTP client MUST send
   the first <hello> message.  The case of SOAP over BEEP imposes no
   ordering constraints.

3.4  NETCONF Session Usage

   NETCONF sessions are persistent for both performance and semantic
   reasons.  NETCONF session state contains the following:
   1.  Authentication Information
   2.  Capability Information
   3.  Locks
   4.  Pending Operations
   5.  Operation Sequence Numbers

   Authentication must be maintained throughout a session due to the
   fact that it is expensive to establish.  Capability Information is
   maintained so that appropriate operations can be applied during a
   session.  Locks are released upon termination of a session as this
   makes the protocol more robust.  Pending operations come and go from
   existence during the normal course of RPC operations.  Operation
   sequence numbers provide the small but necessary state information to
   refer to operations during the session.

   In the case of SOAP over HTTP, a NETCONF session is supported by an
   HTTP connection with an authenticated user.  For SOAP over BEEP, a
   NETCONF session is supported by a BEEP channel operating according to

Goddard                   Expires July 2, 2005                 [Page 10]

Internet-Draft             NETCONF Over SOAP                January 2005

   the BEEP profile for SOAP [16].

3.5  NETCONF Session Teardown

   To allow automated cleanup, NETCONF over SOAP session teardown takes
   place when the underlying connection (in the case of HTTP) or channel
   (in the case of BEEP) is closed.  Note that the root cause of such
   teardown may be the closure of the TCP connection under either HTTP
   or BEEP as the case may be.  NETCONF managers and agents must be
   capable of programatically closing the transport connections
   associated with NETCONF sessions, such as in response to a
   <close-session> operation; thus, the HTTP or BEEP substrate
   implementation must expose this appropriately.

3.6  A NETCONF Over SOAP example

   Since the proposed WSDL (in Section 3.7) uses document/literal
   encoding, the use of a SOAP header and body has little impact on the
   representation of a NETCONF operation.  This example shows HTTP/1.0
   for simplicity.  Examples for HTTP/1.1 and BEEP would be similar.

   C: POST /netconf HTTP/1.0
   C: Content-Type: text/xml; charset=utf-8
   C: Accept: application/soap+xml, text/*
   C: Cache-Control: no-cache
   C: Pragma: no-cache
   C: Content-Length: 467
   C: <?xml version="1.0" encoding="UTF-8"?>
   C: <soapenv:Envelope
   C:   xmlns:soapenv="">
   C:   <soapenv:Body>
   C:     <rpc message-id="101"
   C:          xmlns="xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   C:       <get-config>
   C:         <filter type="subtree">
   C:           <top xmlns="">
   C:             <users/>
   C:           </top>
   C:         </filter>
   C:       </get-config>
   C:     </rpc>
   C:   </soapenv:Body>
   C: </soapenv:Envelope>

   The HTTP/1.0 response is also straightforward:

Goddard                   Expires July 2, 2005                 [Page 11]

Internet-Draft             NETCONF Over SOAP                January 2005

   S: HTTP/1.0 200 OK
   S: Content-Type: text/xml; charset=utf-8
   S: <?xml version="1.0" encoding="UTF-8"?>
   S: <soapenv:Envelope
   S:   xmlns:soapenv="">
   S:   <soapenv:Body>
   S:     <rpc-reply message-id="101"
   S:                xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   S:       <data>
   S:         <top xmlns="">
   S:           <users>
   S:             <user>
   S:               <name>root</name>
   S:               <type>superuser</type>
   S:               <full-name>Charlie Root</full-name>
   S:                 <dept>1</dept>
   S:                 <id>1</id>
   S:               </company-info>
   S:             </user>
   S:             <user>
   S:               <name>fred</name>
   S:               <type>admin</type>
   S:               <full-name>Fred Flintstone</full-name>
   S:                 <dept>2</dept>
   S:                 <id>2</id>
   S:               </company-info>
   S:             </user>
   S:           </users>
   S:         </top>
   S:       </data>
   S:     </rpc-reply>
   S:   </soapenv:Body>
   S: </soapenv:Envelope>


   The following WSDL document assumes a hypothetical location for the
   NETCONF schema.

   <?xml version="1.0" encoding="UTF-8"?>

Goddard                   Expires July 2, 2005                 [Page 12]

Internet-Draft             NETCONF Over SOAP                January 2005


     <import namespace="urn:ietf:params:xml:ns:netconf:base:1.0"

       <xsd:schema xmlns:xsd=""
          targetNamespace="urn:ietf:params:xml:ns:netconf:soap:1.0" >
         <xsd:element name="capability" type="xsd:anyURI" />
         <xsd:element name="capabilities">
               <xsd:element ref="tns:capability"
                            maxOccurs="unbounded" />
         <xsd:element name="hello">
               <xsd:element ref="tns:capabilities"
                            maxOccurs="1" />

     <message name="helloRequest">
       <part name="in" element="tns:hello"/>
     <message name="helloResponse">
       <part name="out" element="tns:hello"/>

     <message name="rpcRequest">
       <part name="in" element="netb:rpc"/>
     <message name="rpcResponse">
       <part name="out" element="netb:rpc-reply"/>

     <portType name="netconfPortType">
       <operation name="rpc">
         <input message="tns:rpcRequest"/>
         <output message="tns:rpcResponse"/>

Goddard                   Expires July 2, 2005                 [Page 13]

Internet-Draft             NETCONF Over SOAP                January 2005

       <operation name="hello">
         <input message="tns:helloRequest"/>
         <output message="tns:helloResponse"/>

     <binding name="netconfBinding" type="tns:netconfPortType">
       <SOAP:binding style="document"
       <operation name="hello">
           <SOAP:body use="literal"
           <SOAP:body use="literal"
       <operation name="rpc">
           <SOAP:body use="literal"
           <SOAP:body use="literal"


3.8  Sample Service Definition WSDL

   The following WSDL document assumes a hypothetical location for the
   NETCONF over SOAP WSDL definitions.  A typical deployment of a device
   manageable via NETCONF over SOAP would provide a service definition
   similar to the following to identify the address of the device.

Goddard                   Expires July 2, 2005                 [Page 14]

Internet-Draft             NETCONF Over SOAP                January 2005

   <?xml version="1.0" encoding="UTF-8"?>

     <import namespace="urn:ietf:params:xml:ns:netconf:soap:1.0"

     <service name="netconf">
       <port name="netconfPort" binding="nets:netconfBinding">
         <SOAP:address location="http://localhost:8080/netconf"/>


Goddard                   Expires July 2, 2005                 [Page 15]

Internet-Draft             NETCONF Over SOAP                January 2005

4.  Security Considerations

   NETCONF is used to access and modify configuration information, so
   the ability to access this protocol should be limited to users and
   systems that are authorized to view or modify the agent's
   configuration data.

   Because configuration information is sent in both directions, it is
   not sufficient for just the client or user to be authenticated with
   the server.  The identity of the server should also be authenticated
   with the client.

   Configuration data may include sensitive information, such as user
   names or security keys.  So, NETCONF should only be used over
   communications channels that provide strong encryption for data

   If the NETCONF server provides remote access through insecure
   protocols, such as HTTP, care should be taken to prevent execution of
   the NETCONF program when strong user authentication or data privacy
   is not available.

4.1  Integrity, Privacy, and Authentication

   The NETCONF SOAP binding relies on an underlying secure transport for
   integrity and privacy.  Such transports are expected to include TLS
   [12] and IPSec.  There are a number of options for authentication
   (some of which are deployment-specific):
   o  within the transport (such as with TLS client certificates)
   o  within HTTP (such as Digest Access Authentication [10])
   o  within SOAP (such as a digital signature in the header [19])

   HTTP, BEEP, and SOAP level authentication can be integrated with
   RADIUS [13] to support remote authentication databases.

4.2  Vulnerabilities

   The above protocols may have various vulnerabilities, and these may
   be inherited by NETCONF over SOAP.

   NETCONF itself may have vulnerabilities due to the fact that an
   authorization model is not currently specified.

   It is important that device capabilities and authorization remain
   constant for the duration of any outstanding NETCONF session.  In the
   case of NETCONF, it is important to consider that device management
   may be taking place over multiple substrates (in addition to SOAP)

Goddard                   Expires July 2, 2005                 [Page 16]

Internet-Draft             NETCONF Over SOAP                January 2005

   and it is important that the different substrates have a common
   authentication model.

4.3  Environmental Specifics

   Some deployments of NETCONF over SOAP may choose to use transports
   without encryption.  This presents vulnerabilities but may be
   selected for deployments involving closed networks or debugging

   A device managed by NETCONF may interact (over protocols other than
   NETCONF) with devices managed by other protocols, all of differing
   security.  Each point of entry brings with it a potential

Goddard                   Expires July 2, 2005                 [Page 17]

Internet-Draft             NETCONF Over SOAP                January 2005

5.  IANA Considerations

   The IANA will assign TCP ports for NETCONF for SOAP over HTTP and
   SOAP over BEEP.

   The IANA will place netconf-soap_1.0.wsdl in the IANA XML registry.

Goddard                   Expires July 2, 2005                 [Page 18]

Internet-Draft             NETCONF Over SOAP                January 2005

6.  References

6.1  Normative References

   [1]   Enns, R., "NETCONF Configuration Protocol",
         draft-ietf-netconf-prot-03 (work in progress), June 2004,

   [2]   Bray, T., Paoli, J., Sperberg-McQueen, C. and E. Maler,
         "Extensible Markup Language (XML) 1.0 (Second Edition)", W3C
         REC REC-xml-20001006, October 2000,

   [3]   Box, D., Ehnebuske, D., Kakivaya, G., Layman, A., Mendelsohn,
         N., Nielsen, H., Thatte, S. and D. Winer, "Simple Object Access
         Protocol (SOAP) 1.1", W3C Note NOTE-SOAP-20000508, May 2000,

   [4]   Christensen, E., Curbera, F., Meredith, G. and S. Weerawarana,
         "Web Services Description Language (WSDL) 1.1", W3C Note
         NOTE-wsdl-20010315, March 2001,

   [5]   Thompson, H., Beech, D., Maloney, M. and N. Mendelsohn, "XML
         Schema Part 1: Structures", W3C Recommendation
         REC-xmlschema-1-20010502, May 2001,

   [6]   Freed, N. and N. Borenstein, "Multipurpose Internet Mail
         Extensions (MIME) Part One: Format of Internet Message Bodies",
         RFC 2045, November 1996, <>.

   [7]   Freed, N. and N. Borenstein, "Multipurpose Internet Mail
         Extensions (MIME) Part Two: Media Types", RFC 2046, November
         1996, <>.

   [8]   Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L.,
         Leach, P. and T. Berners-Lee, "Hypertext Transfer Protocol --
         HTTP/1.1", RFC 2616, June 1999,

   [9]   Moore, K., "On the use of HTTP as a Substrate", RFC 3205,
         February 2002, <>.

   [10]  Franks, J., Hallam-Baker, P., Hostetler, J., Leach, P.,
         Luotonen, A., Sink, E. and L. Stewart, "An Extension to HTTP:
         Digest Access Authentication", RFC 2069, January 1997,

Goddard                   Expires July 2, 2005                 [Page 19]

Internet-Draft             NETCONF Over SOAP                January 2005


   [11]  Bradner, S., "Key words for use in RFCs to Indicate Requirement
         Levels", RFC 2119, March 1997,

   [12]  Dierks, T., Allen, C., Treese, W., Karlton, P., Freier, A. and
         P. Kocher, "The TLS Protocol Version 1.0", RFC 2246, January
         1999, <>.

   [13]  Rigney, C., Willens, S., Rubens, A. and W. Simpson, "Remote
         Authentication Dial In User Service (RADIUS)", RFC 2865, June
         2000, <>.

   [14]  Rose, M. and D. New, "Reliable Delivery for syslog", RFC 3195,
         November 2001, <>.

   [15]  Rose, M., "The Blocks Extensible Exchange Protocol Core", RFC
         3080, March 2001, <>.

   [16]  O'Tuathail, E. and M. Rose, "Using the Simple Object Access
         Protocol (SOAP) in Blocks Extensible Exchange Protocol (BEEP)",
         RFC 3288, June 2002, <>.

   [17]  Mealling, M., "The IETF XML Registry", RFC 3688, January 2004,

6.2  Informative References

   [18]  Barton, J., Nielsen, H. and S. Thatte, "SOAP Messages with
         Attachments", W3C Note NOTE-SOAP-attachments-20001211, Dec

   [19]  Brown, A., Fox, B., Hada, S., LaMacchia, B. and H. Maruyama,
         "SOAP Security Extensions: Digital Signature", W3C Note
         NOTE-SOAP-dsig-20010206, Feb 2001,

   [20]  Nadalin, A., Kaler, C., Hallam-Baker, P. and R. Monzillo, "Web
         Services Security: SOAP Message Security V1.0", OASIS Standard
         wss-soap-message-security-1.0, Mar 2004,

Goddard                   Expires July 2, 2005                 [Page 20]

Internet-Draft             NETCONF Over SOAP                January 2005

Author's Address

   Ted Goddard
   ICEsoft Technologies Inc.
   Suite 300, 1717 10th St. NW
   Calgary, AB  T2M 4S2

   Phone: (403) 663-3322

Goddard                   Expires July 2, 2005                 [Page 21]

Internet-Draft             NETCONF Over SOAP                January 2005

Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at

Disclaimer of Validity

   This document and the information contained herein are provided on an

Copyright Statement

   Copyright (C) The Internet Society (2005).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


   Funding for the RFC Editor function is currently provided by the
   Internet Society.

Goddard                   Expires July 2, 2005                 [Page 22]