NETCONF Working Group                                          K. Watsen
Internet-Draft                                          Juniper Networks
Intended status: Standards Track                          M. Abrahamsson
Expires: July 19, 2019                                         T-Systems
                                                               I. Farrer
                                                     Deutsche Telekom AG
                                                        January 15, 2019


                 Secure Zero Touch Provisioning (SZTP)
                    draft-ietf-netconf-zerotouch-29

Abstract

   This draft presents a technique to securely provision a networking
   device when it is booting in a factory-default state.  Variations in
   the solution enables it to be used on both public and private
   networks.  The provisioning steps are able to update the boot image,
   commit an initial configuration, and execute arbitrary scripts to
   address auxiliary needs.  The updated device is subsequently able to
   establish secure connections with other systems.  For instance, a
   device may establish NETCONF (RFC 6241) and/or RESTCONF (RFC 8040)
   connections with deployment-specific network management systems.

Editorial Note (To be removed by RFC Editor)

   This draft contains many placeholder values that need to be replaced
   with finalized values at the time of publication.  This note
   summarizes all of the substitutions that are needed.  No other RFC
   Editor instructions are specified elsewhere in this document.

   Artwork in the IANA Considerations section contains placeholder
   values for DHCP options pending IANA assignment.  Please apply the
   following replacements:

   o  "TBD1" --> the assigned value for id-ct-sztpConveyedInfoXML

   o  "TBD2" --> the assigned value for id-ct-sztpConveyedInfoJSON

   o  "TBD_IANA_URL" --> the assigned URL for the IANA registry

   Artwork in this document contains shorthand references to drafts in
   progress.  Please apply the following replacements:

   o  "XXXX" --> the assigned numerical RFC value for this draft

   Artwork in this document contains placeholder values for the date of
   publication of this draft.  Please apply the following replacement:



Watsen, et al.            Expires July 19, 2019                 [Page 1]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  "2019-01-15" --> the publication date of this draft

   The following one Appendix section is to be removed prior to
   publication:

   o  Appendix D.  Change Log

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 19, 2019.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   5
     1.1.  Use Cases . . . . . . . . . . . . . . . . . . . . . . . .   5
     1.2.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   6
     1.3.  Requirements Language . . . . . . . . . . . . . . . . . .   8
     1.4.  Tree Diagrams . . . . . . . . . . . . . . . . . . . . . .   8
   2.  Types of Conveyed Information . . . . . . . . . . . . . . . .   8
     2.1.  Redirect Information  . . . . . . . . . . . . . . . . . .   8



Watsen, et al.            Expires July 19, 2019                 [Page 2]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


     2.2.  Onboarding Information  . . . . . . . . . . . . . . . . .   9
   3.  Artifacts . . . . . . . . . . . . . . . . . . . . . . . . . .  10
     3.1.  Conveyed Information  . . . . . . . . . . . . . . . . . .  10
     3.2.  Owner Certificate . . . . . . . . . . . . . . . . . . . .  11
     3.3.  Ownership Voucher . . . . . . . . . . . . . . . . . . . .  12
     3.4.  Artifact Encryption . . . . . . . . . . . . . . . . . . .  13
     3.5.  Artifact Groupings  . . . . . . . . . . . . . . . . . . .  13
   4.  Sources of Bootstrapping Data . . . . . . . . . . . . . . . .  14
     4.1.  Removable Storage . . . . . . . . . . . . . . . . . . . .  15
     4.2.  DNS Server  . . . . . . . . . . . . . . . . . . . . . . .  16
     4.3.  DHCP Server . . . . . . . . . . . . . . . . . . . . . . .  19
     4.4.  Bootstrap Server  . . . . . . . . . . . . . . . . . . . .  20
   5.  Device Details  . . . . . . . . . . . . . . . . . . . . . . .  21
     5.1.  Initial State . . . . . . . . . . . . . . . . . . . . . .  21
     5.2.  Boot Sequence . . . . . . . . . . . . . . . . . . . . . .  23
     5.3.  Processing a Source of Bootstrapping Data . . . . . . . .  25
     5.4.  Validating Signed Data  . . . . . . . . . . . . . . . . .  26
     5.5.  Processing Redirect Information . . . . . . . . . . . . .  27
     5.6.  Processing Onboarding Information . . . . . . . . . . . .  28
   6.  The Conveyed Information Data Model . . . . . . . . . . . . .  31
     6.1.  Data Model Overview . . . . . . . . . . . . . . . . . . .  31
     6.2.  Example Usage . . . . . . . . . . . . . . . . . . . . . .  32
     6.3.  YANG Module . . . . . . . . . . . . . . . . . . . . . . .  34
   7.  The SZTP Bootstrap Server API . . . . . . . . . . . . . . . .  40
     7.1.  API Overview  . . . . . . . . . . . . . . . . . . . . . .  40
     7.2.  Example Usage . . . . . . . . . . . . . . . . . . . . . .  41
     7.3.  YANG Module . . . . . . . . . . . . . . . . . . . . . . .  44
   8.  DHCP Options  . . . . . . . . . . . . . . . . . . . . . . . .  56
     8.1.  DHCPv4 SZTP Redirect Option . . . . . . . . . . . . . . .  56
     8.2.  DHCPv6 SZTP Redirect Option . . . . . . . . . . . . . . .  57
     8.3.  Common Field Encoding . . . . . . . . . . . . . . . . . .  58
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .  59
     9.1.  Clock Sensitivity . . . . . . . . . . . . . . . . . . . .  59
     9.2.  Use of IDevID Certificates  . . . . . . . . . . . . . . .  59
     9.3.  Immutable Storage for Trust Anchors . . . . . . . . . . .  59
     9.4.  Secure Storage for Long-lived Private Keys  . . . . . . .  59
     9.5.  Blindly Authenticating a Bootstrap Server . . . . . . . .  60
     9.6.  Disclosing Information to Untrusted Servers . . . . . . .  60
     9.7.  Sequencing Sources of Bootstrapping Data  . . . . . . . .  61
     9.8.  Safety of Private Keys used for Trust . . . . . . . . . .  61
     9.9.  Increased Reliance on Manufacturers . . . . . . . . . . .  62
     9.10. Concerns with Trusted Bootstrap Servers . . . . . . . . .  62
     9.11. Validity Period for Conveyed Information  . . . . . . . .  63
     9.12. Cascading Trust via Redirects . . . . . . . . . . . . . .  64
     9.13. Possible Reuse of Private Keys  . . . . . . . . . . . . .  64
     9.14. Non-Issue with Encrypting Signed Artifacts  . . . . . . .  65
     9.15. The "ietf-sztp-conveyed-info" YANG Module . . . . . . . .  65
     9.16. The "ietf-sztp-bootstrap-server" YANG Module  . . . . . .  66



Watsen, et al.            Expires July 19, 2019                 [Page 3]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   10. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  66
     10.1.  The IETF XML Registry  . . . . . . . . . . . . . . . . .  66
     10.2.  The YANG Module Names Registry . . . . . . . . . . . . .  67
     10.3.  The SMI Security for S/MIME CMS Content Type Registry  .  67
     10.4.  The BOOTP Manufacturer Extensions and DHCP Options
            Registry . . . . . . . . . . . . . . . . . . . . . . . .  67
     10.5.  The Dynamic Host Configuration Protocol for IPv6
            (DHCPv6) Registry  . . . . . . . . . . . . . . . . . . .  68
     10.6.  The Service Name and Transport Protocol Port Number
            Registry . . . . . . . . . . . . . . . . . . . . . . . .  68
     10.7.  The DNS Underscore Global Scoped Entry Registry  . . . .  68
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . .  69
     11.1.  Normative References . . . . . . . . . . . . . . . . . .  69
     11.2.  Informative References . . . . . . . . . . . . . . . . .  71
   Appendix A.  Example Device Data Model  . . . . . . . . . . . . .  74
     A.1.  Data Model Overview . . . . . . . . . . . . . . . . . . .  74
     A.2.  Example Usage . . . . . . . . . . . . . . . . . . . . . .  74
     A.3.  YANG Module . . . . . . . . . . . . . . . . . . . . . . .  75
   Appendix B.  Promoting a Connection from Untrusted to Trusted . .  78
   Appendix C.  Workflow Overview  . . . . . . . . . . . . . . . . .  80
     C.1.  Enrollment and Ordering Devices . . . . . . . . . . . . .  80
     C.2.  Owner Stages the Network for Bootstrap  . . . . . . . . .  82
     C.3.  Device Powers On  . . . . . . . . . . . . . . . . . . . .  84
   Appendix D.  Change Log . . . . . . . . . . . . . . . . . . . . .  87
     D.1.  ID to 00  . . . . . . . . . . . . . . . . . . . . . . . .  87
     D.2.  00 to 01  . . . . . . . . . . . . . . . . . . . . . . . .  87
     D.3.  01 to 02  . . . . . . . . . . . . . . . . . . . . . . . .  87
     D.4.  02 to 03  . . . . . . . . . . . . . . . . . . . . . . . .  88
     D.5.  03 to 04  . . . . . . . . . . . . . . . . . . . . . . . .  88
     D.6.  04 to 05  . . . . . . . . . . . . . . . . . . . . . . . .  88
     D.7.  05 to 06  . . . . . . . . . . . . . . . . . . . . . . . .  89
     D.8.  06 to 07  . . . . . . . . . . . . . . . . . . . . . . . .  89
     D.9.  07 to 08  . . . . . . . . . . . . . . . . . . . . . . . .  89
     D.10. 08 to 09  . . . . . . . . . . . . . . . . . . . . . . . .  89
     D.11. 09 to 10  . . . . . . . . . . . . . . . . . . . . . . . .  89
     D.12. 10 to 11  . . . . . . . . . . . . . . . . . . . . . . . .  90
     D.13. 11 to 12  . . . . . . . . . . . . . . . . . . . . . . . .  90
     D.14. 12 to 13  . . . . . . . . . . . . . . . . . . . . . . . .  90
     D.15. 13 to 14  . . . . . . . . . . . . . . . . . . . . . . . .  91
     D.16. 14 to 15  . . . . . . . . . . . . . . . . . . . . . . . .  91
     D.17. 15 to 16  . . . . . . . . . . . . . . . . . . . . . . . .  91
     D.18. 16 to 17  . . . . . . . . . . . . . . . . . . . . . . . .  92
     D.19. 17 to 18  . . . . . . . . . . . . . . . . . . . . . . . .  92
     D.20. 18 to 19  . . . . . . . . . . . . . . . . . . . . . . . .  93
     D.21. 19 to 20  . . . . . . . . . . . . . . . . . . . . . . . .  93
     D.22. 20 to 21  . . . . . . . . . . . . . . . . . . . . . . . .  94
     D.23. 21 to 22  . . . . . . . . . . . . . . . . . . . . . . . .  94
     D.24. 22 to 23  . . . . . . . . . . . . . . . . . . . . . . . .  94



Watsen, et al.            Expires July 19, 2019                 [Page 4]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


     D.25. 23 to 24  . . . . . . . . . . . . . . . . . . . . . . . .  95
     D.26. 24 to 25  . . . . . . . . . . . . . . . . . . . . . . . .  95
     D.27. 25 to 26  . . . . . . . . . . . . . . . . . . . . . . . .  96
     D.28. 26 to 27  . . . . . . . . . . . . . . . . . . . . . . . .  96
     D.29. 27 to 28  . . . . . . . . . . . . . . . . . . . . . . . .  97
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  97
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  97

1.  Introduction

   A fundamental business requirement for any network operator is to
   reduce costs where possible.  For network operators, deploying
   devices to many locations can be a significant cost, as sending
   trained specialists to each site for installations is both cost
   prohibitive and does not scale.

   This document defines Secure Zero Touch Provisioning (SZTP), a
   bootstrapping strategy enabling devices to securely obtain
   bootstrapping data with no installer action beyond physical placement
   and connecting network and power cables.  As such, SZTP enables non-
   technical personnel to bring up devices in remote locations without
   the need for any operator input.

   The SZTP solution includes updating the boot image, committing an
   initial configuration, and executing arbitrary scripts to address
   auxiliary needs.  The updated device is subsequently able to
   establish secure connections with other systems.  For instance, a
   devices may establish NETCONF [RFC8040] and/or RESTCONF [RFC6241]
   connections with deployment-specific network management systems.

   This document primarily regards physical devices, where the setting
   of the device's initial state, described in Section 5.1, occurs
   during the device's manufacturing process.  The SZTP solution may be
   extended to support virtual machines or other such logical
   constructs, but details for how this can be accomplished is left for
   future work.

1.1.  Use Cases

   o  Device connecting to a remotely administered network

         This use-case involves scenarios, such as a remote branch
         office or convenience store, whereby a device connects as an
         access gateway to an ISP's network.  Assuming it is not
         possible to customize the ISP's network to provide any
         bootstrapping support, and with no other nearby device to
         leverage, the device has no recourse but to reach out to an
         Internet-based bootstrap server to bootstrap from.



Watsen, et al.            Expires July 19, 2019                 [Page 5]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  Device connecting to a locally administered network

         This use-case covers all other scenarios and differs only in
         that the device may additionally leverage nearby devices, which
         may direct it to use a local service to bootstrap from.  If no
         such information is available, or the device is unable to use
         the information provided, it can then reach out to the network
         just as it would for the remotely administered network use-
         case.

   Conceptual workflows for how SZTP might be deployed are provided in
   Appendix C.

1.2.  Terminology

   This document uses the following terms (sorted by name):

   Artifact:  The term "artifact" is used throughout to represent any of
       the three artifacts defined in Section 3 (conveyed information,
       ownership voucher, and owner certificate).  These artifacts
       collectively provide all the bootstrapping data a device may use.

   Bootstrapping Data:  The term "bootstrapping data" is used throughout
       this document to refer to the collection of data that a device
       may obtain during the bootstrapping process.  Specifically, it
       refers to the three artifacts conveyed information, owner
       certificate, and ownership voucher, as described in Section 3.

   Bootstrap Server:  The term "bootstrap server" is used within this
       document to mean any RESTCONF server implementing the YANG module
       defined in Section 7.3.

   Conveyed Information:  The term "conveyed information" is used herein
       to refer either redirect information or onboarding information.
       Conveyed information is one of the three bootstrapping artifacts
       described in Section 3.

   Device:  The term "device" is used throughout this document to refer
       to a network element that needs to be bootstrapped.  See
       Section 5 for more information about devices.

   Manufacturer:  The term "manufacturer" is used herein to refer to the
       manufacturer of a device or a delegate of the manufacturer.

   Network Management System (NMS):  The acronym "NMS" is used
       throughout this document to refer to the deployment-specific
       management system that the bootstrapping process is responsible
       for introducing devices to.  From a device's perspective, when



Watsen, et al.            Expires July 19, 2019                 [Page 6]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


       the bootstrapping process has completed, the NMS is a NETCONF or
       RESTCONF client.

   Onboarding Information:  The term "onboarding information" is used
       herein to refer to one of the two types of "conveyed information"
       defined in this document, the other being "redirect information".
       Onboarding information is formally defined by the "onboarding-
       information" YANG-data structure in Section 6.3.

   Onboarding Server:  The term "onboarding server" is used herein to
       refer to a bootstrap server that only returns onboarding
       information.

   Owner:  The term "owner" is used throughout this document to refer to
       the person or organization that purchased or otherwise owns a
       device.

   Owner Certificate:  The term "owner certificate" is used in this
       document to represent an X.509 certificate that binds an owner
       identity to a public key, which a device can use to validate a
       signature over the conveyed information artifact.  The owner
       certificate may be communicated along with its chain of
       intermediate certificates leading up to a known trust anchor.
       The owner certificate is one of the three bootstrapping artifacts
       described in Section 3.

   Ownership Voucher:  The term "ownership voucher" is used in this
       document to represent the voucher artifact defined in [RFC8366].
       The ownership voucher is used to assign a device to an owner.
       The ownership voucher is one of the three bootstrapping artifacts
       described in Section 3.

   Redirect Information:  The term "redirect information" is used herein
       to refer to one of the two types of "conveyed information"
       defined in this document, the other being "onboarding
       information".  Redirect information is formally defined by the
       "redirect-information" YANG-data structure in Section 6.3.

   Redirect Server:  The term "redirect server" is used to refer to a
       bootstrap server that only returns redirect information.  A
       redirect server is particularly useful when hosted by a
       manufacturer, as a well-known (e.g., Internet-based) resource to
       redirect devices to deployment-specific bootstrap servers.

   Signed Data:  The term "signed data" is used throughout to mean
       conveyed information that has been signed, specifically by a
       private key possessed by a device's owner.




Watsen, et al.            Expires July 19, 2019                 [Page 7]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   Unsigned Data:  The term "unsigned data" is used throughout to mean
       conveyed information that has not been signed.

1.3.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

1.4.  Tree Diagrams

   Tree diagrams used in this document follow the notation defined in
   [RFC8340].

2.  Types of Conveyed Information

   This document defines two types of conveyed information that devices
   can access during the bootstrapping process.  These conveyed
   information types are described in this section.  Examples are
   provided in Section 6.2

2.1.  Redirect Information

   Redirect information redirects a device to another bootstrap server.
   Redirect information encodes a list of bootstrap servers, each
   specifying the bootstrap server's hostname (or IP address), an
   optional port, and an optional trust anchor certificate that the
   device can use to authenticate the bootstrap server with.

   Redirect information is YANG modeled data formally defined by the
   "redirect-information" container in the YANG module presented in
   Section 6.3.  This container has the tree diagram shown below.

               +--:(redirect-information)
                  +-- redirect-information
                     +-- bootstrap-server* [address]
                        +-- address         inet:host
                        +-- port?           inet:port-number
                        +-- trust-anchor?   cms

   Redirect information may be trusted or untrusted.  The redirect
   information is trusted whenever it is obtained via a secure
   connection to a trusted bootstrap server, or whenever it is signed by
   the device's owner.  In all other cases, the redirect information is
   untrusted.




Watsen, et al.            Expires July 19, 2019                 [Page 8]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   Trusted redirect information is useful for enabling a device to
   establish a secure connection to a specified bootstrap server, which
   is possible when the redirect information includes the bootstrap
   server's trust anchor certificate.

   Untrusted redirect information is useful for directing a device to a
   bootstrap server where signed data has been staged for it to obtain.
   Note that, when the redirect information is untrusted, devices
   discard any potentially included trust anchor certificates.

   How devices process redirect information is described in Section 5.5.

2.2.  Onboarding Information

   Onboarding information provides data necessary for a device to
   bootstrap itself and establish secure connections with other systems.
   As defined in this document, onboarding information can specify
   details about the boot image a device must be running, specify an
   initial configuration the device must commit, and specify scripts
   that the device must successfully execute.

   Onboarding information is YANG modeled data formally defined by the
   "onboarding-information" container in the YANG module presented in
   Section 6.3.  This container has the tree diagram shown below.

            +--:(onboarding-information)
               +-- onboarding-information
                  +-- boot-image
                  |  +-- os-name?              string
                  |  +-- os-version?           string
                  |  +-- download-uri*         inet:uri
                  |  +-- image-verification* [hash-algorithm]
                  |     +-- hash-algorithm    identityref
                  |     +-- hash-value        yang:hex-string
                  +-- configuration-handling?      enumeration
                  +-- pre-configuration-script?    script
                  +-- configuration?               binary
                  +-- post-configuration-script?   script

   Onboarding information must be trusted for it to be of any use to a
   device.  There is no option for a device to process untrusted
   onboarding information.

   Onboarding information is trusted whenever it is obtained via a
   secure connection to a trusted bootstrap server, or whenever it is
   signed by the device's owner.  In all other cases, the onboarding
   information is untrusted.




Watsen, et al.            Expires July 19, 2019                 [Page 9]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   How devices process onboarding information is described in
   Section 5.6.

3.  Artifacts

   This document defines three artifacts that can be made available to
   devices while they are bootstrapping.  Each source of bootstrapping
   data specifies how it provides the artifacts defined in this section
   (see Section 4).

3.1.  Conveyed Information

   The conveyed information artifact encodes the essential bootstrapping
   data for the device.  This artifact is used to encode the redirect
   information and onboarding information types discussed in Section 2.

   The conveyed information artifact is a CMS structure, as described in
   [RFC5652], encoded using ASN.1 distinguished encoding rules (DER), as
   specified in ITU-T X.690 [ITU.X690.2015].  The CMS structure MUST
   contain content conforming to the YANG module specified in
   Section 6.3.

   The conveyed information CMS structure may encode signed or unsigned
   bootstrapping data.  When the bootstrapping data is signed, it may
   also be encrypted but, from a terminology perspective, it is still
   "signed data" Section 1.2.

   When the conveyed information artifact is unsigned, as it might be
   when communicated over trusted channels, the CMS structure's top-most
   content type MUST be one of the OIDs described in Section 10.3 (i.e.,
   id-ct-sztpConveyedInfoXML or id-ct-sztpConveyedInfoJSON), or the OID
   id-data (1.2.840.113549.1.7.1).  When the OID id-data is used, the
   encoding (JSON, XML, etc.)  SHOULD be communicated externally.  In
   either case, the associated content is an octet string containing
   "conveyed-information" data in the expected encoding.

   When the conveyed information artifact is unsigned and encrypted, as
   it might be when communicated over trusted channels but, for some
   reason, the operator wants to ensure that only the device is able to
   see the contents, the CMS structure's top-most content type MUST be
   the OID id-envelopedData (1.2.840.113549.1.7.3).  Furthermore, the
   encryptedContentInfo's content type MUST be one of the OIDs described
   in Section 10.3 (i.e., id-ct-sztpConveyedInfoXML or id-ct-
   sztpConveyedInfoJSON), or the OID id-data (1.2.840.113549.1.7.1).
   When the OID id-data is used, the encoding (JSON, XML, etc.)  SHOULD
   be communicated externally.  In either case, the associated content
   is an octet string containing "conveyed-information" data in the
   expected encoding.



Watsen, et al.            Expires July 19, 2019                [Page 10]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   When the conveyed information artifact is signed, as it might be when
   communicated over untrusted channels, the CMS structure's top-most
   content type MUST be the OID id-signedData (1.2.840.113549.1.7.2).
   Furthermore, the inner eContentType MUST be one of the OIDs described
   in Section 10.3 (i.e., id-ct-sztpConveyedInfoXML or id-ct-
   sztpConveyedInfoJSON), or the OID id-data (1.2.840.113549.1.7.1).
   When the OID id-data is used, the encoding (JSON, XML, etc.)  SHOULD
   be communicated externally.  In either case, the associated content
   or eContent is an octet string containing "conveyed-information" data
   in the expected encoding.

   When the conveyed information artifact is signed and encrypted, as it
   might be when communicated over untrusted channels and privacy is
   important, the CMS structure's top-most content type MUST be the OID
   id-envelopedData (1.2.840.113549.1.7.3).  Furthermore, the
   encryptedContentInfo's content type MUST be the OID id-signedData
   (1.2.840.113549.1.7.2), whose eContentType MUST be one of the OIDs
   described in Section 10.3 (i.e., id-ct-sztpConveyedInfoXML or id-ct-
   sztpConveyedInfoJSON), or the OID id-data (1.2.840.113549.1.7.1).
   When the OID id-data is used, the encoding (JSON, XML, etc.)  SHOULD
   be communicated externally.  In either case, the associated content
   or eContent is an octet string containing "conveyed-information" data
   in the expected encoding.

3.2.  Owner Certificate

   The owner certificate artifact is an X.509 certificate [RFC5280] that
   is used to identify an "owner" (e.g., an organization).  The owner
   certificate can be signed by any certificate authority (CA).  The
   owner certificate either MUST have no Key Usage specified or the Key
   Usage MUST at least set the "digitalSignature" bit.  The values for
   the owner certificate's "subject" and/or "subjectAltName" are not
   constrained by this document.

   The owner certificate is used by a device to verify the signature
   over the conveyed information artifact (Section 3.1) that the device
   should have also received, as described in Section 3.5.  In
   particular, the device verifies the signature using the public key in
   the owner certificate over the content contained within the conveyed
   information artifact.

   The owner certificate artifact is formally a CMS structure, as
   specified by [RFC5652], encoded using ASN.1 distinguished encoding
   rules (DER), as specified in ITU-T X.690 [ITU.X690.2015].

   The owner certificate CMS structure MUST contain the owner
   certificate itself, as well as all intermediate certificates leading
   to the "pinned-domain-cert" certificate specified in the ownership



Watsen, et al.            Expires July 19, 2019                [Page 11]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   voucher.  The owner certificate artifact MAY optionally include the
   "pinned-domain-cert" as well.

   In order to support devices deployed on private networks, the owner
   certificate CMS structure MAY also contain suitably fresh, as
   determined by local policy, revocation objects (e.g., CRLs).  Having
   these revocation objects stapled to the owner certificate may obviate
   the need for the device to have to download them dynamically using
   the CRL distribution point or an OCSP responder specified in the
   associated certificates.

   When unencrypted, the owner certificate artifact's CMS structure's
   top-most content type MUST be the OID id-signedData
   (1.2.840.113549.1.7.2).  The inner SignedData structure is the
   degenerate form, whereby there are no signers, that is commonly used
   to disseminate certificates and revocation objects.

   When encrypted, the owner certificate artifact's CMS structure's top-
   most content type MUST be the OID id-envelopedData
   (1.2.840.113549.1.7.3), and the encryptedContentInfo's content type
   MUST be the OID id-signedData (1.2.840.113549.1.7.2), whereby the
   inner SignedData structure is the degenerate form that has no signers
   commonly used to disseminate certificates and revocation objects.

3.3.  Ownership Voucher

   The ownership voucher artifact is used to securely identify a
   device's owner, as it is known to the manufacturer.  The ownership
   voucher is signed by the device's manufacturer.

   The ownership voucher is used to verify the owner certificate
   (Section 3.2) that the device should have also received, as described
   in Section 3.5.  In particular, the device verifies that the owner
   certificate has a chain of trust leading to the trusted certificate
   included in the ownership voucher ("pinned-domain-cert").  Note that
   this relationship holds even when the owner certificate is a self-
   signed certificate, and hence also the pinned-domain-cert.

   When unencrypted, the ownership voucher artifact is as defined in
   [RFC8366].  As described, it is a CMS structure whose top-most
   content type MUST be the OID id-signedData (1.2.840.113549.1.7.2),
   whose eContentType MUST be OID id-ct-animaJSONVoucher
   (1.2.840.113549.1.9.16.1), or the OID id-data (1.2.840.113549.1.7.1).
   When the OID id-data is used, the encoding (JSON, XML, etc.)  SHOULD
   be communicated externally.  In either case, the associated content
   is an octet string containing ietf-voucher data in the expected
   encoding.




Watsen, et al.            Expires July 19, 2019                [Page 12]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   When encrypted, the ownership voucher artifact's CMS structure's top-
   most content type MUST be the OID id-envelopedData
   (1.2.840.113549.1.7.3), and the encryptedContentInfo's content type
   MUST be the OID id-signedData (1.2.840.113549.1.7.2), whose
   eContentType MUST be OID id-ct-animaJSONVoucher
   (1.2.840.113549.1.9.16.1), or the OID id-data (1.2.840.113549.1.7.1).
   When the OID id-data is used, the encoding (JSON, XML, etc.)  SHOULD
   be communicated externally.  In either case, the associated content
   is an octet string containing ietf-voucher data in the expected
   encoding.

3.4.  Artifact Encryption

   Each of the three artifacts MAY be individually encrypted.
   Encryption may be important in some environments where the content is
   considered sensitive.

   Each of the three artifacts are encrypted in the same way, by the
   unencrypted form being encapsulated inside a CMS EnvelopedData type.

   As a consequence, both the conveyed information and ownership voucher
   artifacts are signed and then encrypted, never encrypted and then
   signed.

   This sequencing has the advantage of shrouding the signer's
   certificate, and ensuring that the owner knows the content being
   signed.  This sequencing further enables the owner to inspect an
   unencrypted voucher obtained from a manufacturer and then encrypt the
   voucher later themselves, perhaps while also stapling in current
   revocation objects, when ready to place the artifact in an unsafe
   location.

   When encrypted, the CMS MUST be encrypted using a secure device
   identity certificate for the device.  This certificate MAY be the
   same as the TLS-level client certificate the device uses when
   connecting to bootstrap servers.  The owner must possess the device's
   identity certificate at the time of encrypting the data.  How the
   owner comes to posses the device's identity certificate for this
   purpose is outside the scope of this document.

3.5.  Artifact Groupings

   The previous sections discussed the bootstrapping artifacts, but only
   certain groupings of these artifacts make sense to return in the
   various bootstrapping situations described in this document.  These
   groupings are:





Watsen, et al.            Expires July 19, 2019                [Page 13]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


      Unsigned Data:  This artifact grouping is useful for cases when
         transport level security can be used to convey trust (e.g.,
         HTTPS), or when the conveyed information can be processed in a
         provisional manner (i.e.  unsigned redirect information).

      Signed Data, without revocations:  This artifact grouping is
         useful when signed data is needed (i.e., because the data is
         obtained from an untrusted source and it cannot be processed
         provisionally) and either revocations are not needed or the
         revocations can be obtained dynamically.

      Signed Data, with revocations:  This artifact grouping is useful
         when signed data is needed (i.e., because the data is obtained
         from an untrusted source and it cannot be processed
         provisionally), and revocations are needed, and the revocations
         cannot be obtained dynamically.

   The presence of each artifact, and any distinguishing
   characteristics, are identified for each artifact grouping in the
   table below ("yes/no" regards if the artifact is present in the
   artifact grouping):

   +---------------------+---------------+--------------+--------------+
   | Artifact            | Conveyed      | Ownership    | Owner        |
   | Grouping            | Information   | Voucher      | Certificate  |
   +=====================+===============+==============+==============+
   | Unsigned Data       | Yes, no sig   | No           | No           |
   +---------------------+---------------+--------------+--------------+
   | Signed Data,        | Yes, with sig | Yes, without | Yes, without |
   | without revocations |               | revocations  | revocations  |
   +---------------------+---------------+--------------+--------------+
   | Signed Data,        | Yes, with sig | Yes, with    | Yes, with    |
   | with revocations    |               | revocations  | revocations  |
   +---------------------+---------------+--------------+--------------+

4.  Sources of Bootstrapping Data

   This section defines some sources for bootstrapping data that a
   device can access.  The list of sources defined here is not meant to
   be exhaustive.  It is left to future documents to define additional
   sources for obtaining bootstrapping data.

   For each source of bootstrapping data defined in this section,
   details are given for how the three artifacts listed in Section 3 are
   provided.






Watsen, et al.            Expires July 19, 2019                [Page 14]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


4.1.  Removable Storage

   A directly attached removable storage device (e.g., a USB flash
   drive) MAY be used as a source of SZTP bootstrapping data.

   Use of a removable storage device is compelling, as it does not
   require any external infrastructure to work.  It is notable that the
   raw boot image file can also be located on the removable storage
   device, enabling a removable storage device to be a fully self-
   standing bootstrapping solution.

   To use a removable storage device as a source of bootstrapping data,
   a device need only detect if the removable storage device is plugged
   in and mount its filesystem.

   A removable storage device is an untrusted source of bootstrapping
   data.  This means that the information stored on the removable
   storage device either MUST be signed or MUST be information that can
   be processed provisionally (e.g., unsigned redirect information).

   From an artifact perspective, since a removable storage device
   presents itself as a filesystem, the bootstrapping artifacts need to
   be presented as files.  The three artifacts defined in Section 3 are
   mapped to files below.

   Artifact to File Mapping:

      Conveyed Information:  Mapped to a file containing the binary
         artifact described in Section 3.1 (e.g., conveyed-
         information.cms).

      Owner Certificate:  Mapped to a file containing the binary
         artifact described in Section 3.2 (e.g., owner-
         certificate.cms).

      Ownership Voucher:  Mapped to a file containing the binary
         artifact described in Section 3.3 (e.g., ownership-voucher.cms
         or ownership-voucher.vcj).

   The format of the removable storage device's filesystem and the
   naming of the files are outside the scope of this document.  However,
   in order to facilitate interoperability, it is RECOMMENDED devices
   support open and/or standards based filesystems.  It is also
   RECOMMENDED that devices assume a file naming convention that enables
   more than one instance of bootstrapping data (i.e., for different
   devices) to exist on a removable storage device.  The file naming
   convention SHOULD additionally be unique to the manufacturer, in




Watsen, et al.            Expires July 19, 2019                [Page 15]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   order to enable bootstrapping data from multiple manufacturers to
   exist on a removable storage device.

4.2.  DNS Server

   A DNS server MAY be used as a source of SZTP bootstrapping data.

   Using a DNS server may be a compelling option for deployments having
   existing DNS infrastructure, as it enables a touchless bootstrapping
   option that does not entail utilizing an Internet based resource
   hosted by a 3rd-party.

   DNS is an untrusted source of bootstrapping data.  Even if DNSSEC
   [RFC6698] is used to authenticate the various DNS resource records
   (e.g., A, AAAA, CERT, TXT, and TLSA), the device cannot be sure that
   the domain returned to it from e.g., a DHCP server, belongs to its
   rightful owner.  This means that the information stored in the DNS
   records either MUST be signed (per this document, not DNSSEC), or
   MUST be information that can be processed provisionally (e.g.,
   unsigned redirect information).

4.2.1.  DNS Queries

   Devices claiming to support DNS as a source of bootstrapping data
   MUST first query for device-specific DNS records and, only if doing
   so does not result in a successful bootstrap, then MUST query for
   device-independent DNS records.

   For each of the device-specific and device-independent queries,
   devices MUST first query using multicast DNS [RFC6762] and, only if
   doing so does not result in a successful bootstrap, then MUST query
   again using unicast DNS [RFC1035] [RFC7766], assuming the address of
   a DNS server is known, such as it may be using techniques similar to
   those described in Section 11 of [RFC6763], which is referenced a few
   times in this document, even though this document does not itself use
   DNS-SD (RFC 6763 is identified herein as an Informative reference).

   When querying for device-specific DNS records, devices MUST query for
   TXT records [RFC1035] under "<serial-number>._sztp", where <serial-
   number> is the device's serial number (the same value as in the
   device's secure device identity certificate), and "_sztp" is the
   globally scoped DNS attribute registered by this document in
   Section 10.7.

   Example device-specific DNS record queries:

      TXT in <serial-number>._sztp.local.  (multicast)
      TXT in <serial-number>._sztp.<domain>.  (unicast)



Watsen, et al.            Expires July 19, 2019                [Page 16]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   When querying for device-independent DNS records, devices MUST query
   for SRV records [RFC2782] under "_sztp._tcp", where "_sztp" is the
   service name registered by this document in Section 10.6, and "_tcp"
   is the globally scoped DNS attribute registered by
   [I-D.ietf-dnsop-attrleaf].

   Note that a device-independent response is anyway only able to encode
   unsigned data, since signed data necessitates the use of a device-
   specific ownership voucher.  Use of SRV records maximumly leverages
   existing DNS standards.  A response containing multiple SRV records
   is comparable to an unsigned redirect information's list of bootstrap
   servers.

   Example device-independent DNS record queries:

      SRV in _sztp._tcp.local.  (multicast)
      SRV in _sztp._tcp.<domain>.  (unicast)

4.2.2.  DNS Response for Device-Specific Queries

   For device-specific queries, the three bootstrapping artifacts
   defined in Section 3 are encoded into the TXT records using key/value
   pairs, similar to the technique described in Section 6.3 of
   [RFC6763].

   Artifact to TXT Record Mapping:

      Conveyed Information:  Mapped to a TXT record having the key "ci"
         and the value being the binary artifact described in
         Section 3.1.

      Owner Certificate:  Mapped to a TXT record having the key "oc" and
         the value being the binary artifact described in Section 3.2.

      Ownership Voucher:  Mapped to a TXT record having the key "ov" and
         the value being the binary artifact described in Section 3.3.

   Devices MUST ignore any other keys that may be returned.

   Note that, despite the name, TXT records can and SHOULD (per
   Section 6.5 of [RFC6763]) encode binary data.

   Following is an example of a device-specific response, as it might be
   presented by a user-agent, containing signed data.  This example
   assumes that the device's serial number is "<serial-number>", the
   domain is "example.com", and that "<binary data>" represents the
   binary artifact:




Watsen, et al.            Expires July 19, 2019                [Page 17]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


     <serial-number>._sztp.example.com. 3600 IN TXT "ci=<binary data>"
     <serial-number>._sztp.example.com. 3600 IN TXT "oc=<binary data>"
     <serial-number>._sztp.example.com. 3600 IN TXT "ov=<binary data>"

   Note that, in the case that "ci" encodes unsigned data, the "oc" and
   "ov" keys would not be present in the response.

4.2.3.  DNS Response for Device-Independent Queries

   For device-independent queries, the three bootstrapping artifacts
   defined in Section 3 are encoded into the SVR records as follows.

   Artifact to SRV Record Mapping:

      Conveyed Information:  This artifact is not supported directly.
         Instead, the essence of unsigned redirect information is mapped
         to SVR records per [RFC2782].

      Owner Certificate:  Not supported.  Device-independent responses
         are never encode signed data, and hence there is no need for an
         owner certificate artifact.

      Ownership Voucher:  Not supported.  Device-independent responses
         are never encode signed data, and hence there is no need for an
         ownership voucher artifact.

   Following is an example of a device-independent response, as it might
   be presented by a user-agent, containing (effectively) unsigned
   redirect information to four bootstrap servers.  This example assumes
   that the domain is "example.com" and that there are four bootstrap
   servers "sztp[1-4]":

      _sztp._tcp.example.com. 1800 IN SRV 0 0 443 sztp1.example.com.
      _sztp._tcp.example.com. 1800 IN SRV 1 0 443 sztp2.example.com.
      _sztp._tcp.example.com. 1800 IN SRV 2 0 443 sztp3.example.com.
      _sztp._tcp.example.com. 1800 IN SRV 2 0 443 sztp4.example.com.

   Note that, in this example, "sztp3" and "sztp4" have equal priority,
   and hence effectively represent a clustered pair of bootstrap
   servers.  While "sztp1" and "sztp2" only have a single SRV record
   each, it may be that the record points to a load-balancer fronting a
   cluster of bootstrap servers.

   While this document does not use DNS-SD [RFC6763], per Section 12.2
   of that RFC, mDNS responses SHOULD also include all address records
   (type "A" and "AAAA") named in the SRV rdata.





Watsen, et al.            Expires July 19, 2019                [Page 18]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


4.2.4.  Size of Signed Data

   The signed data artifacts are large by DNS conventions.  In the
   smallest-footprint scenario, they are each a few kilobytes in size.
   However, onboarding information can easily be several kilobytes in
   size, and has the potential to be many kilobytes in size.

   All resource records, including TXT records, have an upper size limit
   of 65535 bytes, since "RDLENGTH" is a 16-bit field (Section 3.2.1 in
   [RFC1035]).  If it is ever desired to encode onboarding information
   that exceeds this limit, the DNS records returned should instead
   encode redirect information, to direct the device to a bootstrap
   server from which the onboarding information can be obtained.

   Given the expected size of the TXT records, it is unlikely that
   signed data will fit into a UDP-based DNS packet, even with the
   EDNS(0) Extensions [RFC6891] enabled.  Depending on content, signed
   data may also not fit into a multicast DNS packet, which bounds the
   size to 9000 bytes, per Section 17 in [RFC6762].  Thus it is expected
   that DNS Transport over TCP [RFC7766] will be required in order to
   return signed data.

4.3.  DHCP Server

   A DHCP server MAY be used as a source of SZTP bootstrapping data.

   Using a DHCP server may be a compelling option for deployments having
   existing DHCP infrastructure, as it enables a touchless bootstrapping
   option that does not entail utilizing an Internet based resource
   hosted by a 3rd-party.

   A DHCP server is an untrusted source of bootstrapping data.  Thus the
   information stored on the DHCP server either MUST be signed, or it
   MUST be information that can be processed provisionally (e.g.,
   unsigned redirect information).

   However, unlike other sources of bootstrapping data described in this
   document, the DHCP protocol (especially DHCP for IPv4) is very
   limited in the amount of data that can be conveyed, to the extent
   that signed data cannot be communicated.  This means that only
   unsigned redirect information can be conveyed via DHCP.

   Since the redirect information is unsigned, it SHOULD NOT include the
   optional trust anchor certificate, as it takes up space in the DHCP
   message, and the device would have to discard it anyway.  For this
   reason, the DHCP options defined in Section 8 do not enable the trust
   anchor certificate to be encoded.




Watsen, et al.            Expires July 19, 2019                [Page 19]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   From an artifact perspective, the three artifacts defined in
   Section 3 are mapped to the DHCP fields specified in Section 8 as
   follows.

   Artifact to DHCP Option Fields Mapping:

      Conveyed Information:  This artifact is not supported directly.
         Instead, the essence of unsigned redirect information is mapped
         to the DHCP options described in Section 8.

      Owner Certificate:  Not supported.  There is not enough space in
         the DHCP packet to hold an owner certificate artifact.

      Ownership Voucher:  Not supported.  There is not enough space in
         the DHCP packet to hold an ownership voucher artifact.

4.4.  Bootstrap Server

   A bootstrap server MAY be used as a source of SZTP bootstrapping
   data.  A bootstrap server is defined as a RESTCONF [RFC8040] server
   implementing the YANG module provided in Section 7.

   Using a bootstrap server as a source of bootstrapping data is a
   compelling option as it MAY use transport-level security, obviating
   the need for signed data, which may be easier to deploy in some
   situations.

   Unlike any other source of bootstrapping data described in this
   document, a bootstrap server is not only a source of data, but it can
   also receive data from devices using the YANG-defined "report-
   progress" RPC defined in the YANG module (Section 7.3).  The "report-
   progress" RPC enables visibility into the bootstrapping process
   (e.g., warnings and errors), and provides potentially useful
   information upon completion (e.g., the device's SSH host-keys).

   A bootstrap server may be a trusted or an untrusted source of
   bootstrapping data, depending on if the device learned about the
   bootstrap server's trust anchor from a trusted source.  When a
   bootstrap server is trusted, the conveyed information returned from
   it MAY be signed.  When the bootstrap server is untrusted, the
   conveyed information either MUST be signed or MUST be information
   that can be processed provisionally (e.g., unsigned redirect
   information).

   From an artifact perspective, since a bootstrap server presents data
   conforming to a YANG data model, the bootstrapping artifacts need to
   be mapped to YANG nodes.  The three artifacts defined in Section 3




Watsen, et al.            Expires July 19, 2019                [Page 20]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   are mapped to "output" nodes of the "get-bootstrapping-data" RPC
   defined in Section 7.3 below.

   Artifact to Bootstrap Server Mapping:

      Conveyed Information:  Mapped to the "conveyed-information" leaf
         in the output of the "get-bootstrapping-data" RPC.

      Owner Certificate:  Mapped to the "owner-certificate" leaf in the
         output of the "get-bootstrapping-data" RPC.

      Ownership Voucher:  Mapped to the "ownership-voucher" leaf in the
         output of the "get-bootstrapping-data" RPC.

   SZTP bootstrap servers have only two endpoints, one for the "get-
   bootstrapping-data" RPC and one for the "report-progress" RPC.  These
   RPCs use the authenticated RESTCONF username to isolate the execution
   of the RPC from other devices.

5.  Device Details

   Devices supporting the bootstrapping strategy described in this
   document MUST have the preconfigured state and bootstrapping logic
   described in the following sections.

5.1.  Initial State

























Watsen, et al.            Expires July 19, 2019                [Page 21]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


      +-------------------------------------------------------------+
      |                           <device>                          |
      |                                                             |
      | +---------------------------------------------------------+ |
      | |                   <read/write storage>                  | |
      | |                                                         | |
      | | 1. flag to enable SZTP bootstrapping set to "true"      | |
      | +---------------------------------------------------------+ |
      |                                                             |
      | +---------------------------------------------------------+ |
      | |                   <read-only storage>                   | |
      | |                                                         | |
      | | 2. TLS client cert & related intermediate certificates  | |
      | | 3. list of trusted well-known bootstrap servers         | |
      | | 4. list of trust anchor certs for bootstrap servers     | |
      | | 5. list of trust anchor certs for ownership vouchers    | |
      | +---------------------------------------------------------+ |
      |                                                             |
      |   +-----------------------------------------------------+   |
      |   |                 <secure storage>                    |   |
      |   |                                                     |   |
      |   |  6. private key for TLS client certificate          |   |
      |   |  7. private key for decrypting SZTP artifacts       |   |
      |   +-----------------------------------------------------+   |
      |                                                             |
      +-------------------------------------------------------------+

   Each numbered item below corresponds to a numbered item in the
   diagram above.

   1.  Devices MUST have a configurable variable that is used to enable/
       disable SZTP bootstrapping.  This variable MUST be enabled by
       default in order for SZTP bootstrapping to run when the device
       first powers on.  Because it is a goal that the configuration
       installed by the bootstrapping process disables SZTP
       bootstrapping, and because the configuration may be merged into
       the existing configuration, using a configuration node that
       relies on presence is NOT RECOMMENDED, as it cannot be removed by
       the merging process.

   2.  Devices that support loading bootstrapping data from bootstrap
       servers (see Section 4.4) SHOULD possess a TLS-level client
       certificate and any intermediate certificates leading to the
       certificate's well-known trust-anchor.  The well-known trust
       anchor certificate may be an intermediate certificate or a self-
       signed root certificate.  To support devices not having a client
       certificate, devices MAY, alternatively or in addition to,
       identify and authenticate themselves to the bootstrap server



Watsen, et al.            Expires July 19, 2019                [Page 22]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


       using an HTTP authentication scheme, as allowed by Section 2.5 in
       [RFC8040]; however, this document does not define a mechanism for
       operator input enabling, for example, the entering of a password.

   3.  Devices that support loading bootstrapping data from well-known
       bootstrap servers MUST possess a list of the well-known bootstrap
       servers.  Consistent with redirect information (Section 2.1, each
       bootstrap server can be identified by its hostname or IP address,
       and an optional port.

   4.  Devices that support loading bootstrapping data from well-known
       bootstrap servers MUST also possess a list of trust anchor
       certificates that can be used to authenticate the well-known
       bootstrap servers.  For each trust anchor certificate, if it is
       not itself a self-signed root certificate, the device SHOULD also
       possess the chain of intermediate certificates leading up to and
       including the self-signed root certificate.

   5.  Devices that support loading signed data (see Section 1.2) MUST
       possess the trust anchor certificates for validating ownership
       vouchers.  For each trust anchor certificate, if it is not itself
       a self-signed root certificate, the device SHOULD also possess
       the chain of intermediate certificates leading up to and
       including the self-signed root certificate.

   6.  Devices that support using a TLS-level client certificate to
       identify and authenticate themselves to a bootstrap server MUST
       possess the private key that corresponds to the public key
       encoded in the TLS-level client certificate.  This private key
       SHOULD be securely stored, ideally in a cryptographic processor,
       such as a trusted platform module (TPM) chip.

   7.  Devices that support decrypting SZTP artifacts MUST posses the
       private key that corresponds to the public key encoded in the
       secure device identity certificate used when encrypting the
       artifacts.  This private key SHOULD be securely stored, ideally
       in a cryptographic processor, such as a trusted platform module
       (TPM) chip.  This private key MAY be the same as the one
       associated to the TLS-level client certificate used when
       connecting to bootstrap servers.

   A YANG module representing this data is provided in Appendix A.

5.2.  Boot Sequence

   A device claiming to support the bootstrapping strategy defined in
   this document MUST support the boot sequence described in this
   section.



Watsen, et al.            Expires July 19, 2019                [Page 23]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


        Power On
            |
            v                           No
     1. SZTP bootstrapping configured ------> Boot normally
            |
            | Yes
            v
     2. For each supported source of bootstrapping data,
        try to load bootstrapping data from the source
            |
            |
            v                               Yes
     3. Able to bootstrap from any source? -----> Run with new config
            |
            | No
            v
     4. Loop back to Step 1.


     Note: At any time, the device MAY be configured via an alternate
           provisioning mechanism (e.g., CLI).

   Each numbered item below corresponds to a numbered item in the
   diagram above.

   1.  When the device powers on, it first checks to see if SZTP
       bootstrapping is configured, as is expected to be the case for
       the device's preconfigured initial state.  If SZTP bootstrapping
       is not configured, then the device boots normally.

   2.  The device iterates over its list of sources for bootstrapping
       data (Section 4).  Details for how to processes a source of
       bootstrapping data are provided in Section 5.3.

   3.  If the device is able to bootstrap itself from any of the sources
       of bootstrapping data, it runs with the new bootstrapped
       configuration.

   4.  Otherwise the device MUST loop back through the list of
       bootstrapping sources again.

   This document does not limit the simultaneous use of alternate
   provisioning mechanisms.  Such mechanisms may include, for instance,
   a command line interface (CLI), a web-based user interface, or even
   another bootstrapping protocol.  Regardless how it is configured, the
   configuration SHOULD unset the flag enabling SZTP bootstrapping
   discussed in Section 5.1.




Watsen, et al.            Expires July 19, 2019                [Page 24]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


5.3.  Processing a Source of Bootstrapping Data

   This section describes a recursive algorithm that devices can use to,
   ultimately, obtain onboarding information.  The algorithm is
   recursive because sources of bootstrapping data may return redirect
   information, which causes the algorithm to run again, for the newly
   discovered sources of bootstrapping data.  An expression that
   captures all possible successful sequences of bootstrapping data is:
   zero or more redirect information responses, followed by one
   onboarding information response.

   An important aspect of the algorithm is knowing when data needs to be
   signed or not.  The following figure provides a summary of options:

                                    Untrusted Source  Trusted Source
       Kind of Bootstrapping Data     Can Provide?     Can Provide?

       Unsigned Redirect Info     :       Yes+             Yes
       Signed Redirect Info       :       Yes              Yes*
       Unsigned Onboarding Info   :        No              Yes
       Signed Onboarding Info     :       Yes              Yes*

       The '+' above denotes that the source redirected to MUST
       return signed data, or more unsigned redirect information.

       The '*' above denotes that, while possible, it is generally
       unnecessary for a trusted source to return signed data.

   The recursive algorithm uses a conceptual global-scoped variable
   called "trust-state".  The trust-state variable is initialized to
   FALSE.  The ultimate goal of this algorithm is for the device to
   process onboarding information (Section 2.2) while the trust-state
   variable is TRUE.

   If the source of bootstrapping data (Section 4) is a bootstrap server
   (Section 4.4), and the device is able to authenticate the bootstrap
   server using X.509 certificate path validation ([RFC6125], Section 6)
   to one of the device's preconfigured trust anchors, or to a trust
   anchor that it learned from a previous step, then the device MUST set
   trust-state to TRUE.

   When establishing a connection to a bootstrap server, whether trusted
   or untrusted, the device MUST identify and authenticate itself to the
   bootstrap server using a TLS-level client certificate and/or an HTTP
   authentication scheme, per Section 2.5 in [RFC8040].  If both
   authentication mechanisms are used, they MUST both identify the same
   serial number.




Watsen, et al.            Expires July 19, 2019                [Page 25]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   When sending a client certificate, the device MUST also send all of
   the intermediate certificates leading up to, and optionally
   including, the client certificate's well-known trust anchor
   certificate.

   For any source of bootstrapping data (e.g., Section 4), if any
   artifact obtained is encrypted, the device MUST first decrypt it
   using the private key associated with the device certificate used to
   encrypt the artifact.

   If the conveyed information artifact is signed, and the device is
   able to validate the signed data using the algorithm described in
   Section 5.4, then the device MUST set trust-state to TRUE; otherwise,
   if the device is unable to validate the signed data, the device MUST
   set trust-state to FALSE.  Note, this is worded to cover the special
   case when signed data is returned even from a trusted source of
   bootstrapping data.

   If the conveyed information artifact contains redirect information,
   the device MUST, within limits of how many recursive loops the device
   allows, process the redirect information as described in Section 5.5.
   Implementations MUST limit the maximum number of recursive redirects
   allowed; the maximum number of recursive redirects allowed SHOULD be
   no more than ten.  This is the recursion step, it will cause the
   device to reenter this algorithm, but this time the data source will
   definitely be a bootstrap server, as redirect information is only
   able to redirect devices to bootstrap servers.

   If the conveyed information artifact contains onboarding information,
   and trust-state is FALSE, the device MUST exit the recursive
   algorithm (as this is not allowed, see the figure above), returning
   to the bootstrapping sequence described in Section 5.2.  Otherwise,
   the device MUST attempt to process the onboarding information as
   described in Section 5.6.  Whether the processing of the onboarding
   information succeeds or fails, the device MUST exit the recursive
   algorithm, returning to the bootstrapping sequence described in
   Section 5.2, the only difference being in how it responds to the
   "Able to bootstrap from any source?" conditional described in the
   figure in the section.

5.4.  Validating Signed Data

   Whenever a device is presented signed data, it MUST validate the
   signed data as described in this section.  This includes the case
   where the signed data is provided by a trusted source.

   Whenever there is signed data, the device MUST also be provided an
   ownership voucher and an owner certificate.  How all the needed



Watsen, et al.            Expires July 19, 2019                [Page 26]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   artifacts are provided for each source of bootstrapping data is
   described in Section 4.

   In order to validate signed data, the device MUST first authenticate
   the ownership voucher by validating its signature to one of its
   preconfigured trust anchors (see Section 5.1), which may entail using
   additional intermediate certificates attached to the ownership
   voucher.  If the device has an accurate clock, it MUST verify that
   the ownership voucher was created in the past (i.e., "created-on" <
   now) and, if the "expires-on" leaf is present, the device MUST verify
   that the ownership voucher has not yet expired (i.e., now < "expires-
   on").  The device MUST verify that the ownership voucher's
   "assertion" value is acceptable (e.g., some devices may only accept
   the assertion value "verified").  The device MUST verify that the
   ownership voucher specifies the device's serial number in the
   "serial-number" leaf.  If the "idevid-issuer" leaf is present, the
   device MUST verify that the value is set correctly.  If the
   authentication of the ownership voucher is successful, the device
   extracts the "pinned-domain-cert" node, an X.509 certificate, that is
   needed to verify the owner certificate in the next step.

   The device MUST next authenticate the owner certificate by performing
   X.509 certificate path verification to the trusted certificate
   extracted from the ownership voucher's "pinned-domain-cert" node.
   This verification may entail using additional intermediate
   certificates attached to the owner certificate artifact.  If the
   ownership voucher's "domain-cert-revocation-checks" node's value is
   set to "true", the device MUST verify the revocation status of the
   certificate chain used to sign the owner certificate and, if
   suitably-fresh revocation status is unattainable or if it is
   determined that a certificate has been revoked, the device MUST NOT
   validate the owner certificate.

   Finally, the device MUST verify that the conveyed information
   artifact was signed by the validated owner certificate.

   If any of these steps fail, the device MUST invalidate the signed
   data and not perform any subsequent steps.

5.5.  Processing Redirect Information

   In order to process redirect information (Section 2.1), the device
   MUST follow the steps presented in this section.

   Processing redirect information is straightforward; the device
   sequentially steps through the list of provided bootstrap servers
   until it can find one it can bootstrap from.




Watsen, et al.            Expires July 19, 2019                [Page 27]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   If a hostname is provided, and the hostname's DNS resolution is to
   more than one IP address, the device MUST attempt to connect to all
   of the DNS resolved addresses at least once, before moving on to the
   next bootstrap server.  If the device is able to obtain bootstrapping
   data from any of the DNS resolved addresses, it MUST immediately
   process that data, without attempting to connect to any of the other
   DNS resolved addresses.

   If the redirect information is trusted (e.g., trust-state is TRUE),
   and the bootstrap server entry contains a trust anchor certificate,
   then the device MUST authenticate the specified bootstrap server's
   TLS server certificate using X.509 certificate path validation
   ([RFC6125], Section 6) to the specified trust anchor.  If the
   bootstrap server entry does not contain a trust anchor certificate
   device, the device MUST establish a provisional connection to the
   bootstrap server (i.e., by blindly accepting its server certificate),
   and set trust-state to FALSE.

   If the redirect information is untrusted (e.g., trust-state is
   FALSE), the device MUST discard any trust anchors provided by the
   redirect information and establish a provisional connection to the
   bootstrap server (i.e., by blindly accepting its TLS server
   certificate).

5.6.  Processing Onboarding Information

   In order to process onboarding information (Section 2.2), the device
   MUST follow the steps presented in this section.

   When processing onboarding information, the device MUST first process
   the boot image information (if any), then execute the pre-
   configuration script (if any), then commit the initial configuration
   (if any), and then execute the post-configuration script (if any), in
   that order.

   When the onboarding information is obtained from a trusted bootstrap
   server, the device MUST send the "bootstrap-initiated" progress
   report, and send either a terminating "boot-image-installed-
   rebooting", "bootstrap-complete", or error specific progress report.
   If the bootstrap server's "get-bootstrapping-data" RPC-reply's
   "reporting-level" node is set to "verbose", the device MUST
   additionally send all appropriate non-terminating progress reports
   (e.g., initiated, warning, complete, etc.).  Regardless of the
   reporting-level indicated by the bootstrap server, the device MAY
   send progress reports beyond the mandatory ones specified for the
   given reporting level.





Watsen, et al.            Expires July 19, 2019                [Page 28]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   When the onboarding information is obtained from an untrusted
   bootstrap server, the device MUST NOT send any progress reports to
   the bootstrap server, even though the onboarding information was,
   necessarily, signed and authenticated.  Please be aware that
   bootstrap servers are recommended to promote untrusted connections to
   trusted connections, in the last paragraph of Section 9.6, so as to,
   in part, be able to collect progress reports from devices.

   If the device encounters an error at any step, it MUST stop
   processing the onboarding information and return to the bootstrapping
   sequence described in Section 5.2.  In the context of a recursive
   algorithm, the device MUST return to the enclosing loop, not back to
   the very beginning.  Some state MAY be retained from the
   bootstrapping process (e.g., updated boot image, logs, remnants from
   a script, etc.).  However, the retained state MUST NOT be active in
   any way (e.g., no new configuration or running of software), and MUST
   NOT hinder the ability for the device to continue the bootstrapping
   sequence (i.e., process onboarding information from another bootstrap
   server).

   At this point, the specific ordered sequence of actions the device
   MUST perform is described.

   If the onboarding information is obtained from a trusted bootstrap
   server, the device MUST send a "bootstrap-initiated" progress report.
   It is an error if the device does not receive back the "204 No
   Content" HTTP status line.  If an error occurs, the device MUST try
   to send a "bootstrap-error" progress report before exiting.

   The device MUST parse the provided onboarding information document,
   to extract values used in subsequent steps.  Whether using a stream-
   based parser or not, if there is an error when parsing the onboarding
   information, and the device is connected to a trusted bootstrap
   server, the device MUST try to send a "parsing-error" progress report
   before exiting.

   If boot image criteria are specified, the device MUST first determine
   if the boot image it is running satisfies the specified boot image
   criteria.  If the device is already running the specified boot image,
   then it skips the remainder of this step.  If the device is not
   running the specified boot image, then it MUST download, verify, and
   install, in that order, the specified boot image, and then reboot.
   If connected to a trusted bootstrap server, the device MAY try to
   send a "boot-image-mismatch" progress report.  To download the boot
   image, the device MUST only use the URIs supplied by the onboarding
   information.  To verify the boot image, the device MUST either use
   one of the verification fingerprints supplied by the onboarding
   information, or use a cryptographic signature embedded into the boot



Watsen, et al.            Expires July 19, 2019                [Page 29]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   image itself using a mechanism not described by this document.
   Before rebooting, if connected to a trusted bootstrap server, the
   device MUST try to send a "boot-image-installed-rebooting" progress
   report.  Upon rebooting, the bootstrapping process runs again, which
   will eventually come to this step again, but then the device will be
   running the specified boot image, and thus will move to processing
   the next step.  If an error occurs at any step while the device is
   connected to a trusted bootstrap server (i.e., before the reboot),
   the device MUST try to send a "boot-image-error" progress report
   before exiting.

   If a pre-configuration script has been specified, the device MUST
   execute the script, capture any output emitted from the script, and
   check if the script had any warnings or errors.  If an error occurs
   while the device is connected to a trusted bootstrap server, the
   device MUST try to send a "pre-script-error" progress report before
   exiting.

   If an initial configuration has been specified, the device MUST
   atomically commit the provided initial configuration, using the
   approach specified by the "configuration-handling" leaf.  If an error
   occurs while the device is connected to a trusted bootstrap server,
   the device MUST try to send a "config-error" progress report before
   exiting.

   If a post-configuration script has been specified, the device MUST
   execute the script, capture any output emitted from the script, and
   check if the script had any warnings or errors.  If an error occurs
   while the device is connected to a trusted bootstrap server, the
   device MUST try to send a "post-script-error" progress report before
   exiting.

   If the onboarding information was obtained from a trusted bootstrap
   server, and the result of the bootstrapping process did not disable
   the "flag to enable SZTP bootstrapping" described in Section 5.1, the
   device SHOULD send an "bootstrap-warning" progress report.

   If the onboarding information was obtained from a trusted bootstrap
   server, the device MUST send a "bootstrap-complete" progress report.
   It is an error if the device does not receive back the "204 No
   Content" HTTP status line.  If an error occurs, the device MUST try
   to send a "bootstrap-error" progress report before exiting.

   At this point, the device has completely processed the bootstrapping
   data.

   The device is now running its initial configuration.  Notably, if
   NETCONF Call Home or RESTCONF Call Home [RFC8071] is configured, the



Watsen, et al.            Expires July 19, 2019                [Page 30]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   device initiates trying to establish the call home connections at
   this time.

   Implementation Notes:

      Implementations may vary in how to ensure no unwanted state is
      retained when an error occurs.

      Following are some guidelines for if the implementation chooses to
      undo previous steps:

      *  When an error occurs, the device must rollback the current step
         and any previous steps.

      *  Most steps are atomic.  For example, the processing of a
         configuration is specified above as atomic, and the processing
         of scripts is similarly specified as atomic in the "ietf-sztp-
         conveyed-info" YANG module.

      *  In case the error occurs after the initial configuration was
         committed, the device must restore the configuration to the
         configuration that existed prior to the configuration being
         committed.

      *  In case the error occurs after a script had executed
         successfully, it may be helpful for the implementation to
         define scripts as being able to take a conceptual input
         parameter indicating that the script should remove its
         previously set state.

6.  The Conveyed Information Data Model

   This section defines a YANG 1.1 [RFC7950] module that is used to
   define the data model for the conveyed information artifact described
   in Section 3.1.  This data model uses the "yang-data" extension
   statement defined in [RFC8040].  Examples illustrating this data
   model are provided in Section 6.2.

6.1.  Data Model Overview

   The following tree diagram provides an overview of the data model for
   the conveyed information artifact.









Watsen, et al.            Expires July 19, 2019                [Page 31]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


         module: ietf-sztp-conveyed-info

           yang-data conveyed-information:
             +-- (information-type)
                +--:(redirect-information)
                |  +-- redirect-information
                |     +-- bootstrap-server* [address]
                |        +-- address         inet:host
                |        +-- port?           inet:port-number
                |        +-- trust-anchor?   cms
                +--:(onboarding-information)
                   +-- onboarding-information
                      +-- boot-image
                      |  +-- os-name?              string
                      |  +-- os-version?           string
                      |  +-- download-uri*         inet:uri
                      |  +-- image-verification* [hash-algorithm]
                      |     +-- hash-algorithm    identityref
                      |     +-- hash-value        yang:hex-string
                      +-- configuration-handling?      enumeration
                      +-- pre-configuration-script?    script
                      +-- configuration?               binary
                      +-- post-configuration-script?   script

6.2.  Example Usage

   The following example illustrates how redirect information
   (Section 2.1) can be encoded using JSON.























Watsen, et al.            Expires July 19, 2019                [Page 32]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   {
     "ietf-sztp-conveyed-info:redirect-information" : {
       "bootstrap-server" : [
         {
           "address" : "sztp1.example.com",
           "port" : 8443,
           "trust-anchor" : "base64encodedvalue=="
         },
         {
           "address" : "sztp2.example.com",
           "port" : 8443,
           "trust-anchor" : "base64encodedvalue=="
         },
         {
           "address" : "sztp3.example.com",
           "port" : 8443,
           "trust-anchor" : "base64encodedvalue=="
         }
       ]
     }
   }

   The following example illustrates how onboarding information
   (Section 2.2) can be encoded using JSON.

   [Note: '\' line wrapping for formatting only]

   {
     "ietf-sztp-conveyed-info:onboarding-information" : {
       "boot-image" : {
         "os-name" : "VendorOS",
         "os-version" : "17.2R1.6",
         "download-uri" : [ "http://some/path/to/raw/file" ],
         "image-verification" : [
           {
             "hash-algorithm" : "ietf-sztp-conveyed-info:sha-256",
             "hash-value" : "ba:ec:cf:a5:67:82:b4:10:77:c6:67:a6:22:ab:\
   7d:50:04:a7:8b:8f:0e:db:02:8b:f4:75:55:fb:c1:13:b2:33"
           }
         ]
       },
       "configuration-handling" : "merge",
       "pre-configuration-script" : "base64encodedvalue==",
       "configuration" : "base64encodedvalue==",
       "post-configuration-script" : "base64encodedvalue=="
     }
   }




Watsen, et al.            Expires July 19, 2019                [Page 33]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


6.3.  YANG Module

   The conveyed information data model is defined by the YANG module
   presented in this section.

   This module uses data types defined in [RFC5280], [RFC5652],
   [RFC6234], and [RFC6991], an extension statement from [RFC8040], and
   an encoding defined in [ITU.X690.2015].

   <CODE BEGINS> file "ietf-sztp-conveyed-info@2019-01-15.yang"
   module ietf-sztp-conveyed-info {
     yang-version 1.1;
     namespace "urn:ietf:params:xml:ns:yang:ietf-sztp-conveyed-info";
     prefix sztp-info;

     import ietf-yang-types {
       prefix yang;
       reference "RFC 6991: Common YANG Data Types";
     }
     import ietf-inet-types {
       prefix inet;
       reference "RFC 6991: Common YANG Data Types";
     }
     import ietf-restconf {
       prefix rc;
       reference "RFC 8040: RESTCONF Protocol";
     }

     organization
       "IETF NETCONF (Network Configuration) Working Group";

     contact
       "WG Web:   http://tools.ietf.org/wg/netconf
        WG List:  <mailto:netconf@ietf.org>
        Author:   Kent Watsen <mailto:kwatsen@juniper.net>";

     description
      "This module defines the data model for the Conveyed
       Information artifact defined in RFC XXXX: Secure Zero Touch
       Provisioning (SZTP).

       The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
       'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
       'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
       are to be interpreted as described in BCP 14 (RFC 2119,
       RFC 8174) when, and only when, they appear in all
       capitals, as shown here.




Watsen, et al.            Expires July 19, 2019                [Page 34]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


       Copyright (c) 2019 IETF Trust and the persons identified as
       authors of the code. All rights reserved.

       Redistribution and use in source and binary forms, with or
       without modification, is permitted pursuant to, and subject
       to the license terms contained in, the Simplified BSD License
       set forth in Section 4.c of the IETF Trust's Legal Provisions
       Relating to IETF Documents (http://trustee.ietf.org/license-info)

       This version of this YANG module is part of RFC XXXX; see the
       RFC itself for full legal notices.";

     revision 2019-01-15 {
       description
         "Initial version";
       reference
         "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
     }

     // identities

     identity hash-algorithm {
       description
         "A base identity for hash algorithm verification";
     }

     identity sha-256 {
       base "hash-algorithm";
       description "The SHA-256 algorithm.";
       reference "RFC 6234: US Secure Hash Algorithms.";
     }

     // typedefs

     typedef cms {
       type binary;
       description
         "A ContentInfo structure, as specified in RFC 5652,
          encoded using ASN.1 distinguished encoding rules (DER),
          as specified in ITU-T X.690.";
       reference
         "RFC 5652:
            Cryptographic Message Syntax (CMS)
          ITU-T X.690:
            Information technology - ASN.1 encoding rules:
            Specification of Basic Encoding Rules (BER),
            Canonical Encoding Rules (CER) and Distinguished
            Encoding Rules (DER).";



Watsen, et al.            Expires July 19, 2019                [Page 35]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


     }

     // yang-data

     rc:yang-data "conveyed-information" {
       choice information-type {
         mandatory true;
         description
           "This choice statement ensures the response contains
            redirect-information or onboarding-information.";
         container redirect-information {
           description
             "Redirect information is described in Section 2.1 in
              RFC XXXX.  Its purpose is to redirect a device to
              another bootstrap server.";
           reference
             "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
           list bootstrap-server {
             key "address";
             min-elements 1;
             description
               "A bootstrap server entry.";
             leaf address {
               type inet:host;
               mandatory true;
               description
                "The IP address or hostname of the bootstrap server the
                 device should redirect to.";
             }
             leaf port {
               type inet:port-number;
               default "443";
               description
                "The port number the bootstrap server listens on.  If no
                 port is specified, the IANA-assigned port for 'https'
                 (443) is used.";
             }
             leaf trust-anchor {
               type cms;
               description
                 "A CMS structure that MUST contain the chain of
                  X.509 certificates needed to authenticate the TLS
                  certificate presented by this bootstrap server.

                  The CMS MUST only contain a single chain of
                  certificates.  The bootstrap server MUST only
                  authenticate to last intermediate CA certificate
                  listed in the chain.



Watsen, et al.            Expires July 19, 2019                [Page 36]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


                  In all cases, the chain MUST include a self-signed
                  root certificate.  In the case where the root
                  certificate is itself the issuer of the bootstrap
                  server's TLS certificate, only one certificate
                  is present.

                  If needed by the device, this CMS structure MAY
                  also contain suitably fresh revocation objects
                  with which the device can verify the revocation
                  status of the certificates.

                  This CMS encodes the degenerate form of the SignedData
                  structure that is commonly used to disseminate X.509
                  certificates and revocation objects (RFC 5280).";
               reference
                 "RFC 5280:
                    Internet X.509 Public Key Infrastructure Certificate
                    and Certificate Revocation List (CRL) Profile.";
             }
           }
         }
         container onboarding-information {
           description
             "Onboarding information is described in Section 2.2 in
              RFC XXXX.  Its purpose is to provide the device everything
              it needs to bootstrap itself.";
           reference
             "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
           container boot-image {
             description
               "Specifies criteria for the boot image the device MUST
                be running, as well as information enabling the device
                to install the required boot image.";
             leaf os-name {
               type string;
               description
                 "The name of the operating system software the device
                  MUST be running in order to not require a software
                  image upgrade (ex. VendorOS).";
             }
             leaf os-version {
               type string;
               description
                 "The version of the operating system software the
                  device MUST be running in order to not require a
                  software image upgrade (ex. 17.3R2.1).";
             }
             leaf-list download-uri {



Watsen, et al.            Expires July 19, 2019                [Page 37]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


               type inet:uri;
               ordered-by user;
               description
                 "An ordered list of URIs to where the same boot image
                  file may be obtained.  How the URI schemes (http, ftp,
                  etc.) a device supports are known is vendor specific.
                  If a secure scheme (e.g., https) is provided, a device
                  MAY establish an untrusted connection to the remote
                  server, by blindly accepting the server's end-entity
                  certificate, to obtain the boot image.";
             }
             list image-verification {
               must '../download-uri' {
                 description
                   "Download URIs must be provided if an image is to
                    be verified.";
               }
               key hash-algorithm;
               description
                 "A list of hash values that a device can use to verify
                  boot image files with.";
               leaf hash-algorithm {
                 type identityref {
                   base "hash-algorithm";
                 }
                 description
                   "Identifies the hash algorithm used.";
               }
               leaf hash-value {
                 type yang:hex-string;
                 mandatory true;
                 description
                   "The hex-encoded value of the specified hash
                    algorithm over the contents of the boot image
                    file.";
               }
             }
           }
           leaf configuration-handling {
             type enumeration {
               enum "merge" {
                 description
                   "Merge configuration into the running datastore.";
               }
               enum "replace" {
                 description
                   "Replace the existing running datastore with the
                    passed configuration.";



Watsen, et al.            Expires July 19, 2019                [Page 38]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


               }
             }
             must '../configuration';
             description
               "This enumeration indicates how the server should process
                the provided configuration.";
           }
           leaf pre-configuration-script {
             type script;
             description
               "A script that, when present, is executed before the
                configuration has been processed.";
           }
           leaf configuration {
             type binary;
             must '../configuration-handling';
             description
               "Any configuration known to the device.  The use of
                the 'binary' type enables e.g., XML-content to be
                embedded into a JSON document.  The exact encoding
                of the content, as with the scripts, is vendor
                specific.";
           }
           leaf post-configuration-script {
             type script;
             description
               "A script that, when present, is executed after the
                configuration has been processed.";
           }
         }
       }
     }

     typedef script {
       type binary;
       description
         "A device specific script that enables the execution of
          commands to perform actions not possible thru configuration
          alone.

          No attempt is made to standardize the contents, running
          context, or programming language of the script, other than
          that it can indicate if any warnings or errors occurred and
          can emit output.  The contents of the script are considered
          specific to the vendor, product line, and/or model of the
          device.

          If the script execution indicates that an warning occurred,



Watsen, et al.            Expires July 19, 2019                [Page 39]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


          then the device MUST assume that the script had a soft error
          that the script believes will not affect manageability.

          If the script execution indicates that an error occurred,
          the device MUST assume the script had a hard error that the
          script believes will affect manageability.  In this case,
          the script is required to gracefully exit, removing any
          state that might hinder the device's ability to continue
          the bootstrapping sequence (e.g., process onboarding
          information obtained from another bootstrap server).";
     }
   }
   <CODE ENDS>

7.  The SZTP Bootstrap Server API

   This section defines the API for bootstrap servers.  The API is
   defined as that produced by a RESTCONF [RFC8040] server that supports
   the YANG 1.1 [RFC7950] module defined in this section.

7.1.  API Overview

   The following tree diagram provides an overview for the bootstrap
   server RESTCONF API.



























Watsen, et al.            Expires July 19, 2019                [Page 40]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   module: ietf-sztp-bootstrap-server

     rpcs:
       +---x get-bootstrapping-data
       |  +---w input
       |  |  +---w signed-data-preferred?   empty
       |  |  +---w hw-model?                string
       |  |  +---w os-name?                 string
       |  |  +---w os-version?              string
       |  |  +---w nonce?                   binary
       |  +--ro output
       |     +--ro reporting-level?    enumeration {onboarding-server}?
       |     +--ro conveyed-information    cms
       |     +--ro owner-certificate?      cms
       |     +--ro ownership-voucher?      cms
       +---x report-progress {onboarding-server}?
          +---w input
             +---w progress-type         enumeration
             +---w message?              string
             +---w ssh-host-keys
             |  +---w ssh-host-key* []
             |     +---w algorithm    string
             |     +---w key-data     binary
             +---w trust-anchor-certs
                +---w trust-anchor-cert*   cms

7.2.  Example Usage

   This section presents three examples illustrating the bootstrap
   server's API.  Two examples are provided for the "get-bootstrapping-
   data" RPC (once to an untrusted bootstrap server, and again to a
   trusted bootstrap server), and one example for the "report-progress"
   RPC.

   The following example illustrates a device using the API to fetch its
   bootstrapping data from a untrusted bootstrap server.  In this
   example, the device sends the "signed-data-preferred" input parameter
   and receives signed data in the response.













Watsen, et al.            Expires July 19, 2019                [Page 41]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   REQUEST

   [Note: '\' line wrapping for formatting only]

   POST /restconf/operations/ietf-sztp-bootstrap-server:get-bootstrappi\
   ng-data HTTP/1.1
   HOST: example.com
   Content-Type: application/yang.data+xml

   <input
     xmlns="urn:ietf:params:xml:ns:yang:ietf-sztp-bootstrap-server">
     <signed-data-preferred/>
   </input>

   RESPONSE

   HTTP/1.1 200 OK
   Date: Sat, 31 Oct 2015 17:02:40 GMT
   Server: example-server
   Content-Type: application/yang.data+xml

   <output
     xmlns="urn:ietf:params:xml:ns:yang:ietf-sztp-bootstrap-server">
     <conveyed-information>base64encodedvalue==</conveyed-information>
     <owner-certificate>base64encodedvalue==</owner-certificate>
     <ownership-voucher>base64encodedvalue==</ownership-voucher>
   </output>

   The following example illustrates a device using the API to fetch its
   bootstrapping data from a trusted bootstrap server.  In this example,
   the device sends addition input parameters to the bootstrap server,
   which it may use when formulating its response to the device.



















Watsen, et al.            Expires July 19, 2019                [Page 42]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   REQUEST

   [Note: '\' line wrapping for formatting only]

   POST /restconf/operations/ietf-sztp-bootstrap-server:get-bootstrappi\
   ng-data HTTP/1.1
   HOST: example.com
   Content-Type: application/yang.data+xml

   <input
     xmlns="urn:ietf:params:xml:ns:yang:ietf-sztp-bootstrap-server">
     <hw-model>model-x</hw-model>
     <os-name>vendor-os</os-name>
     <os-version>17.3R2.1</os-version>
     <nonce>extralongbase64encodedvalue=</nonce>
   </input>

   RESPONSE

   HTTP/1.1 200 OK
   Date: Sat, 31 Oct 2015 17:02:40 GMT
   Server: example-server
   Content-Type: application/yang.data+xml

   <output
     xmlns="urn:ietf:params:xml:ns:yang:ietf-sztp-bootstrap-server">
     <reporting-level>verbose</reporting-level>
     <conveyed-information>base64encodedvalue==</conveyed-information>
   </output>

   The following example illustrates a device using the API to post a
   progress report to a bootstrap server.  Illustrated below is the
   "bootstrap-complete" message, but the device may send other progress
   reports to the server while bootstrapping.  In this example, the
   device is sending both its SSH host keys and a TLS server
   certificate, which the bootstrap server may, for example, pass to an
   NMS, as discussed in Appendix C.3.














Watsen, et al.            Expires July 19, 2019                [Page 43]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   REQUEST

   [Note: '\' line wrapping for formatting only]

   POST /restconf/operations/ietf-sztp-bootstrap-server:report-progress\
    HTTP/1.1
   HOST: example.com
   Content-Type: application/yang.data+xml

   <input
     xmlns="urn:ietf:params:xml:ns:yang:ietf-sztp-bootstrap-server">
     <progress-type>bootstrap-complete</progress-type>
     <message>example message</message>
     <ssh-host-keys>
       <ssh-host-key>
         <algorithm>ssh-rsa</algorithm>
         <key-data>base64encodedvalue==</key-data>
       </ssh-host-key>
       <ssh-host-key>
         <algorithm>rsa-sha2-256</algorithm>
         <key-data>base64encodedvalue==</key-data>
       </ssh-host-key>
     </ssh-host-keys>
     <trust-anchor-certs>
       <trust-anchor-cert>base64encodedvalue==</trust-anchor-cert>
     </trust-anchor-certs>
   </input>

   RESPONSE

   HTTP/1.1 204 No Content
   Date: Sat, 31 Oct 2015 17:02:40 GMT
   Server: example-server

7.3.  YANG Module

   The bootstrap server's device-facing API is normatively defined by
   the YANG module defined in this section.

   This module uses data types defined in [RFC4253], [RFC5652],
   [RFC5280], [RFC6960], and [RFC8366], uses an encoding defined in
   [ITU.X690.2015], and makes a reference to [RFC4250] and [RFC6187].

   <CODE BEGINS> file "ietf-sztp-bootstrap-server@2019-01-15.yang"
   module ietf-sztp-bootstrap-server {
     yang-version 1.1;
     namespace "urn:ietf:params:xml:ns:yang:ietf-sztp-bootstrap-server";
     prefix sztp-svr;



Watsen, et al.            Expires July 19, 2019                [Page 44]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


     organization
       "IETF NETCONF (Network Configuration) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netconf/>
        WG List:  <mailto:netconf@ietf.org>
        Author:   Kent Watsen <mailto:kwatsen@juniper.net>";

     description
      "This module defines an interface for bootstrap servers, as
       defined by RFC XXXX: Secure Zero Touch Provisioning (SZTP).

       The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
       'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
       'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
       are to be interpreted as described in BCP 14 (RFC 2119,
       RFC 8174) when, and only when, they appear in all
       capitals, as shown here.

       Copyright (c) 2019 IETF Trust and the persons identified as
       authors of the code. All rights reserved.

       Redistribution and use in source and binary forms, with or
       without modification, is permitted pursuant to, and subject
       to the license terms contained in, the Simplified BSD License
       set forth in Section 4.c of the IETF Trust's Legal Provisions
       Relating to IETF Documents (http://trustee.ietf.org/license-info)

       This version of this YANG module is part of RFC XXXX; see the
       RFC itself for full legal notices.";

     revision 2019-01-15 {
       description
         "Initial version";
       reference
         "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
     }

     // features
     feature redirect-server {
       description
        "The server supports being a 'redirect server'.";
     }

     feature onboarding-server {
       description
        "The server supports being an 'onboarding server'.";
     }



Watsen, et al.            Expires July 19, 2019                [Page 45]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


     // typedefs

     typedef cms {
       type binary;
       description
         "A CMS structure, as specified in RFC 5652, encoded using
          ASN.1 distinguished encoding rules (DER), as specified in
          ITU-T X.690.";
       reference
         "RFC 5652:
            Cryptographic Message Syntax (CMS)
          ITU-T X.690:
            Information technology - ASN.1 encoding rules:
            Specification of Basic Encoding Rules (BER),
            Canonical Encoding Rules (CER) and Distinguished
            Encoding Rules (DER).";
     }

     // RPCs

     rpc get-bootstrapping-data {
       description
         "This RPC enables a device, as identified by the RESTCONF
          username, to obtain bootstrapping data that has been made
          available for it.";
       input {
         leaf signed-data-preferred {
           type empty;
           description
             "This optional input parameter enables a device to
              communicate to the bootstrap server that it prefers
              to receive signed data.  Devices SHOULD always send
              this parameter when the bootstrap server is untrusted.
              Upon receiving this input parameter, the bootstrap
              server MUST return either signed data, or unsigned
              redirect information; the bootstrap server MUST NOT
              return unsigned onboarding information.";
         }
         leaf hw-model {
           type string;
           description
             "This optional input parameter enables a device to
              communicate to the bootstrap server its vendor specific
              hardware model number.  This parameter may be needed,
              for instance, when a device's IDevID certificate does
              not include the 'hardwareModelName' value in its
              subjectAltName field, as is allowed by 802.1AR-2009.";
           reference



Watsen, et al.            Expires July 19, 2019                [Page 46]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


             "IEEE 802.1AR-2009: IEEE Standard for Local and
                metropolitan area networks - Secure Device Identity";
         }
         leaf os-name {
           type string;
           description
             "This optional input parameter enables a device to
              communicate to the bootstrap server the name of its
              operating system.  This parameter may be useful if
              the device, as identified by its serial number, can
              run more than one type of operating system (e.g.,
              on a white-box system.";
         }
         leaf os-version {
           type string;
           description
             "This optional input parameter enables a device to
              communicate to the bootstrap server the version of its
              operating system.  This parameter may be used by a
              bootstrap server to return an operating system specific
              response to the device, thus negating the need for a
              potentially expensive boot-image update.";
         }
         leaf nonce {
           type binary {
             length "16..32";
           }
           description
             "This optional input parameter enables a device to
              communicate to the bootstrap server a nonce value.
              This may be especially useful for devices lacking
              an accurate clock, as then the bootstrap server
              can dynamically obtain from the manufacturer a
              voucher with the nonce value in it, as described
              in RFC 8366.";
           reference
             "RFC 8366:
                A Voucher Artifact for Bootstrapping Protocols";
         }
       }
       output {
         leaf reporting-level {
           if-feature onboarding-server;
           type enumeration {
             enum standard {
               description
                 "Send just the progress reports required by RFC XXXX.";
               reference



Watsen, et al.            Expires July 19, 2019                [Page 47]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


                 "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
             }
             enum verbose {
               description
                 "Send additional progress reports that might help
                  troubleshooting an SZTP bootstrapping issue.";
             }
           }
           default standard;
           description
             "Specifies the reporting level for progress reports the
              bootstrap server would like to receive when processing
              onboarding information.  Progress reports are not sent
              when processing redirect information, or when the
              bootstrap server is untrusted (e.g., device sent the
              '<signed-data-preferred>' input parameter).";
         }
         leaf conveyed-information {
           type cms;
           mandatory true;
           description
             "An SZTP conveyed information artifact, as described in
              Section 3.1 of RFC XXXX.";
           reference
             "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
         }
         leaf owner-certificate {
           type cms;
           must '../ownership-voucher' {
             description
               "An ownership voucher must be present whenever an owner
                certificate is presented.";
           }
           description
             "An owner certificate artifact, as described in Section
              3.2 of RFC XXXX.  This leaf is optional because it is
              only needed when the conveyed information artifact is
              signed.";
           reference
             "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
         }
         leaf ownership-voucher {
           type cms;
           must '../owner-certificate' {
             description
               "An owner certificate must be present whenever an
                ownership voucher is presented.";
           }



Watsen, et al.            Expires July 19, 2019                [Page 48]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


           description
             "An ownership voucher artifact, as described by Section
              3.3 of RFC XXXX.  This leaf is optional because it is
              only needed when the conveyed information artifact is
              signed.";
           reference
             "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
         }
       }
     }

     rpc report-progress {
       if-feature onboarding-server;
       description
         "This RPC enables a device, as identified by the RESTCONF
          username, to report its bootstrapping progress to the
          bootstrap server.  This RPC is expected to be used when
          the device obtains onboarding-information from a trusted
          bootstap server.";
       input {
         leaf progress-type {
           type enumeration {
             enum "bootstrap-initiated" {
               description
                 "Indicates that the device just used the
                  'get-bootstrapping-data' RPC.  The 'message' node
                  below MAY contain any additional information that
                  the manufacturer thinks might be useful.";
             }
             enum "parsing-initiated" {
               description
                 "Indicates that the device is about to start parsing
                  the onboarding information.  This progress type is
                  only for when parsing is implemented as a distinct
                  step.";
             }
             enum "parsing-warning" {
               description
                 "Indicates that the device had a non-fatal error when
                  parsing the response from the bootstrap server.  The
                  'message' node below SHOULD indicate the specific
                  warning that occurred.";
             }
             enum "parsing-error" {
               description
                 "Indicates that the device encountered a fatal error
                  when parsing the response from the bootstrap server.
                  For instance, this could be due to malformed encoding,



Watsen, et al.            Expires July 19, 2019                [Page 49]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


                  the device expecting signed data when only unsigned
                  data is provided, the ownership voucher not listing
                  the device's serial number, or because the signature
                  didn't match.  The 'message' node below SHOULD
                  indicate the specific error.  This progress type
                  also indicates that the device has abandoned trying
                  to bootstrap off this bootstrap server.";
             }
             enum "parsing-complete" {
               description
                 "Indicates that the device successfully completed
                  parsing the onboarding information.  This progress
                  type is only for when parsing is implemented as a
                  distinct step.";
             }
             enum "boot-image-initiated" {
               description
                 "Indicates that the device is about to start
                  processing the boot-image information.";
             }
             enum "boot-image-warning" {
               description
                 "Indicates that the device encountered a non-fatal
                  error condition when trying to install a boot-image.
                  A possible reason might include a need to reformat a
                  partition causing loss of data.  The 'message' node
                  below SHOULD indicate any warning messages that were
                  generated.";
             }
             enum "boot-image-error" {
               description
                 "Indicates that the device encountered an error when
                  trying to install a boot-image, which could be for
                  reasons such as a file server being unreachable,
                  file not found, signature mismatch, etc.  The
                  'message' node SHOULD indicate the specific error
                  that occurred.  This progress type also indicates
                  that the device has abandoned trying to bootstrap
                  off this bootstrap server.";
             }
             enum "boot-image-mismatch" {
               description
                 "Indicates that the device that has determined that
                  it is not running the correct boot image.  This
                  message SHOULD precipitate trying to download
                  a boot image.";
             }
             enum "boot-image-installed-rebooting" {



Watsen, et al.            Expires July 19, 2019                [Page 50]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


               description
                 "Indicates that the device successfully installed
                  a new boot image and is about to reboot.  After
                  sending this progress type, the device is not
                  expected to access the bootstrap server again
                  for this bootstrapping attempt.";
             }
             enum "boot-image-complete" {
               description
                 "Indicates that the device believes that it is
                  running the correct boot-image.";
             }
             enum "pre-script-initiated" {
               description
                 "Indicates that the device is about to execute the
                  'pre-configuration-script'.";
             }
             enum "pre-script-warning" {
               description
                 "Indicates that the device obtained a warning from the
                  'pre-configuration-script' when it was executed.  The
                  'message' node below SHOULD capture any output the
                  script produces.";
             }
             enum "pre-script-error" {
               description
                 "Indicates that the device obtained an error from the
                  'pre-configuration-script' when it was executed. The
                  'message' node below SHOULD capture any output the
                  script produces.  This progress type also indicates
                  that the device has abandoned trying to bootstrap
                  off this bootstrap server.";
             }
             enum "pre-script-complete" {
               description
                 "Indicates that the device successfully executed the
                  'pre-configuration-script'.";
             }
             enum "config-initiated" {
               description
                 "Indicates that the device is about to commit the
                  initial configuration.";
             }
             enum "config-warning" {
               description
                 "Indicates that the device obtained warning messages
                  when it committed the initial configuration.  The
                  'message' node below SHOULD indicate any warning



Watsen, et al.            Expires July 19, 2019                [Page 51]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


                  messages that were generated.";
             }
             enum "config-error" {
               description
                 "Indicates that the device obtained error messages
                  when it committed the initial configuration.  The
                  'message' node below SHOULD indicate the error
                  messages that were generated.  This progress type
                  also indicates that the device has abandoned trying
                  to bootstrap off this bootstrap server.";
             }
             enum "config-complete" {
               description
                 "Indicates that the device successfully committed
                  the initial configuration.";
             }
             enum "post-script-initiated" {
               description
                 "Indicates that the device is about to execute the
                  'post-configuration-script'.";
             }
             enum "post-script-warning" {
               description
                 "Indicates that the device obtained a warning from the
                  'post-configuration-script' when it was executed. The
                  'message' node below SHOULD capture any output the
                  script produces.";
             }
             enum "post-script-error" {
               description
                 "Indicates that the device obtained an error from the
                  'post-configuration-script' when it was executed. The
                  'message' node below SHOULD capture any output the
                  script produces.  This progress type also indicates
                  that the device has abandoned trying to bootstrap
                  off this bootstrap server.";
             }
             enum "post-script-complete" {
               description
                 "Indicates that the device successfully executed the
                  'post-configuration-script'.";
             }
             enum "bootstrap-warning" {
              description
                "Indicates that a warning condition occurred for which
                 there no other 'progress-type' enumeration is deemed
                 suitable.  The 'message' node below SHOULD describe
                 the warning.";



Watsen, et al.            Expires July 19, 2019                [Page 52]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


             }
             enum "bootstrap-error" {
              description
                "Indicates that an error condition occurred for which
                 there no other 'progress-type' enumeration is deemed
                 suitable.  The 'message' node below SHOULD describe
                 the error.  This progress type also indicates that
                 the device has abandoned trying to bootstrap off
                 this bootstrap server.";
             }
             enum "bootstrap-complete" {
               description
                 "Indicates that the device successfully processed
                  all 'onboarding-information' provided, and that it
                  is ready to be managed.  The 'message' node below
                  MAY contain any additional information that the
                  manufacturer thinks might be useful.  After sending
                  this progress type, the device is not expected to
                  access the bootstrap server again.";
             }
             enum "informational" {
               description
                 "Indicates any additional information not captured
                  by any of the other progress types. For instance,
                  a message indicating that the device is about to
                  reboot after having installed a boot-image could
                  be provided.  The 'message' node below SHOULD
                  contain information that the manufacturer thinks
                  might be useful.";
             }
           }
           mandatory true;
           description
             "The type of progress report provided.";
         }
         leaf message {
           type string;
           description
             "An optional arbitrary value.";
         }
         container ssh-host-keys {
           when "../progress-type = 'bootstrap-complete'" {
             description
               "SSH host keys are only sent when the progress type
                is 'bootstrap-complete'.";
           }
           description
             "A list of SSH host keys an NMS may use to authenticate



Watsen, et al.            Expires July 19, 2019                [Page 53]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


              subsequent SSH-based connections to this device (e.g.,
              netconf-ssh, netconf-ch-ssh).";
           list ssh-host-key {
             description
               "An SSH host key an NMS may use to authenticate
                subsequent SSH-based connections to this device
                (e.g., netconf-ssh, netconf-ch-ssh).";
             reference
               "RFC 4253: The Secure Shell (SSH) Transport Layer
                          Protocol";
             leaf algorithm {
               type string;
               mandatory true;
               description
                 "The public key algorithm name for this SSH key.

                  Valid values are listed in the 'Public Key Algorithm
                  Names' subregistry of the 'Secure Shell (SSH) Protocol
                  Parameters' registry maintained by IANA.";
               reference
                 "RFC 4250: The Secure Shell (SSH) Protocol Assigned
                            Numbers
                  IANA URL: https://www.iana.org/assignments/ssh-param\\
                            eters/ssh-parameters.xhtml#ssh-parameters-19
                            ('\\' added for formatting reasons)";
             }
             leaf key-data {
               type binary;
               mandatory true;
               description
                 "The binary public key data for this SSH key, as
                  specified by RFC 4253, Section 6.6, i.e.:

                    string    certificate or public key format
                              identifier
                    byte[n]   key/certificate data.";
               reference
                 "RFC 4253: The Secure Shell (SSH) Transport Layer
                            Protocol";
             }
           }
         }
         container trust-anchor-certs {
           when "../progress-type = 'bootstrap-complete'" {
             description
               "Trust anchors are only sent when the progress type
                is 'bootstrap-complete'.";
           }



Watsen, et al.            Expires July 19, 2019                [Page 54]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


           description
             "A list of trust anchor certificates an NMS may use to
              authenticate subsequent certificate-based connections
              to this device (e.g., restconf-tls, netconf-tls, or
              even netconf-ssh with X.509 support from RFC 6187).
              In practice, trust anchors for IDevID certificates do
              not need to be conveyed using this mechanism.";
           reference
             "RFC 6187:
                X.509v3 Certificates for Secure Shell Authentication.";
           leaf-list trust-anchor-cert {
             type cms;
             description
              "A CMS structure whose top-most content type MUST be the
               signed-data content type, as described by Section 5 in
               RFC 5652.

               The CMS MUST contain the chain of X.509 certificates
               needed to authenticate the certificate presented by
               the device.

               The CMS MUST contain only a single chain of
               certificates.  The last certificate in the chain
               MUST be the issuer for the device's end-entity
               certificate.

               In all cases, the chain MUST include a self-signed
               root certificate.  In the case where the root
               certificate is itself the issuer of the device's
               end-entity certificate, only one certificate is
               present.

               This CMS encodes the degenerate form of the SignedData
               structure that is commonly used to disseminate X.509
               certificates and revocation objects (RFC 5280).";
             reference
               "RFC 5280:
                  Internet X.509 Public Key Infrastructure
                  Certificate and Certificate Revocation List (CRL)
                  Profile.
                RFC 5652:
                  Cryptographic Message Syntax (CMS)";
           }
         }
       }
     }
   }
   <CODE ENDS>



Watsen, et al.            Expires July 19, 2019                [Page 55]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


8.  DHCP Options

   This section defines two DHCP options, one for DHCPv4 and one for
   DHCPv6.  These two options are semantically the same, though
   syntactically different.

8.1.  DHCPv4 SZTP Redirect Option

   The DHCPv4 SZTP Redirect Option is used to provision the client with
   one or more URIs for bootstrap servers that can be contacted to
   attempt further configuration.

            DHCPv4 SZTP Redirect Option

             0                             1
             0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
            +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
            |   option-code (143)   |     option-length     |
            +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
            .                                               .
            .    bootstrap-server-list (variable length)    .
            .                                               .
            +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

            * option-code: OPTION_V4_SZTP_REDIRECT (143)
            * option-length: The option length in octets.
            * bootstrap-server-list: A list of servers for the
               client to attempt contacting, in order to obtain
               further bootstrapping data, in the format shown
               in Section 8.3.

   DHCPv4 Client Behavior

   Clients MAY request the OPTION_V4_SZTP_REDIRECT by including its
   option code in the Parameter Request List (55) in DHCP request
   messages.

   On receipt of a DHCPv4 Reply message which contains the
   OPTION_V4_SZTP_REDIRECT, the client processes the response according
   to Section 5.5, with the understanding that the "address" and "port"
   values are encoded in the URIs.

   Any invalid URI entries received in the uri-data field are ignored by
   the client.  If OPTION_V4_SZTP_REDIRECT does not contain at least one
   valid URI entry in the uri-data field, then the client MUST discard
   the option.





Watsen, et al.            Expires July 19, 2019                [Page 56]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   As the list of URIs may exceed the maximum allowed length of a single
   DHCPv4 option (255 octets), the client MUST implement [RFC3396],
   allowing the URI list to be split across a number of
   OPTION_V4_SZTP_REDIRECT option instances.

   DHCPv4 Server Behavior

   The DHCPv4 server MAY include a single instance of Option
   OPTION_V4_SZTP_REDIRECT in DHCP messages it sends.  Servers MUST NOT
   send more than one instance of the OPTION_V4_SZTP_REDIRECT option.

   The server's DHCP message MUST contain only a single instance of the
   OPTION_V4_SZTP_REDIRECT's 'bootstrap-server-list' field.  However,
   the list of URIs in this field may exceed the maximum allowed length
   of a single DHCPv4 option (per [RFC3396]).

   If the length of 'bootstrap-server-list' is small enough to fit into
   a single instance of OPTION_V4_SZTP_REDIRECT, the server MUST NOT
   send more than one instance of this option.

   If the length of the 'bootstrap-server-list' field is too large to
   fit into a single option, then OPTION_V4_SZTP_REDIRECT MUST be split
   into multiple instances of the option according to the process
   described in [RFC3396].

8.2.  DHCPv6 SZTP Redirect Option

   The DHCPv6 SZTP Redirect Option is used to provision the client with
   one or more URIs for bootstrap servers that can be contacted to
   attempt further configuration.

     DHCPv6 SZTP Redirect Option

      0                   1                   2                   3
      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     |       option-code (136)       |          option-length        |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     .           bootstrap-server-list (variable length)             .
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

     * option-code: OPTION_V6_SZTP_REDIRECT (136)
     * option-length: The option length in octets.
     * bootstrap-server-list: A list of servers for the client to
       attempt contacting, in order to obtain further bootstrapping
       data, in the format shown in Section 8.3.

   DHCPv6 Client Behavior



Watsen, et al.            Expires July 19, 2019                [Page 57]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   Clients MAY request the OPTION_V6_SZTP_REDIRECT option, as defined in
   [RFC8415], Sections 18.2.1, 18.2.2, 18.2.4, 18.2.5, 18.2.6, and 21.7.
    As a convenience to the reader, we mention here that the client
   includes requested option codes in the Option Request Option.

   On receipt of a DHCPv6 Reply message which contains the
   OPTION_V6_SZTP_REDIRECT, the client processes the response according
   to Section 5.5, with the understanding that the "address" and "port"
   values are encoded in the URIs.

   Any invalid URI entries received in the uri-data field are ignored by
   the client.  If OPTION_V6_SZTP_REDIRECT does not contain at least one
   valid URI entry in the uri-data field, then the client MUST discard
   the option.

   DHCPv6 Server Behavior

   Section 18.3 of [RFC8415] governs server operation in regard to
   option assignment.  As a convenience to the reader, we mention here
   that the server will send a particular option code only if configured
   with specific values for that option code and if the client requested
   it.

   Option OPTION_V6_SZTP_REDIRECT is a singleton.  Servers MUST NOT send
   more than one instance of the OPTION_V6_SZTP_REDIRECT option.

8.3.  Common Field Encoding

   Both of the DHCPv4 and DHCPv6 options defined in this section encode
   a list of bootstrap server URIs.  The "URI" structure is a DHCP
   option that can contain multiple URIs (see [RFC7227], Section 5.7).
   Each URI entry in the bootstrap-server-list is structured as follows:

    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-...-+-+-+-+-+-+-+
    |       uri-length              |          URI                  |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-...-+-+-+-+-+-+-+

    * uri-length: 2 octets long, specifies the length of the URI data.
    * URI: URI of SZTP bootstrap server.

   The URI of the SZTP bootstrap server MUST use the "https" URI scheme
   defined in Section 2.7.2 of [RFC7230], and MUST be in form
   "https://<ip-address-or-hostname>[:<port>]".








Watsen, et al.            Expires July 19, 2019                [Page 58]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


9.  Security Considerations

9.1.  Clock Sensitivity

   The solution in this document relies on TLS certificates, owner
   certificates, and ownership vouchers, all of which require an
   accurate clock in order to be processed correctly (e.g., to test
   validity dates and revocation status).  Implementations SHOULD ensure
   devices have an accurate clock when shipped from manufacturing
   facilities, and take steps to prevent clock tampering.

   If it is not possible to ensure clock accuracy, it is RECOMMENDED
   that implementations disable the aspects of the solution having clock
   sensitivity.  In particular, such implementations should assume that
   TLS certificates, ownership vouchers, and owner certificates never
   expire and are not revokable.  From an ownership voucher perspective,
   manufacturers SHOULD issue a single ownership voucher for the
   lifetime of such devices.

   Implementations SHOULD NOT rely on NTP for time, as NTP is not a
   secure protocol at this time.  Note, there is an IETF work-in-
   progress to secure NTP [I-D.ietf-ntp-using-nts-for-ntp].

9.2.  Use of IDevID Certificates

   IDevID certificates, as defined in [Std-802.1AR-2018], are
   RECOMMENDED, both for the TLS-level client certificate used by
   devices when connecting to a bootstrap server, as well as for the
   device identity certificate used by owners when encrypting the SZTP
   bootstrapping data artifacts.

9.3.  Immutable Storage for Trust Anchors

   Devices MUST ensure that all their trust anchor certificates,
   including those for connecting to bootstrap servers and verifying
   ownership vouchers, are protected from external modification.

   It may be necessary to update these certificates over time (e.g., the
   manufacturer wants to delegate trust to a new CA).  It is therefore
   expected that devices MAY update these trust anchors when needed
   through a verifiable process, such as a software upgrade using signed
   software images.

9.4.  Secure Storage for Long-lived Private Keys

   Manufacturer-generated device identifiers may have very long
   lifetimes.  For instance, [Std-802.1AR-2018] recommends using the
   "notAfter" value 99991231235959Z in IDevID certificates.  Given the



Watsen, et al.            Expires July 19, 2019                [Page 59]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   long-lived nature of these private keys, it is paramount that they
   are stored so as to resist discovery, such as in a secure
   cryptographic processor, such as a trusted platform module (TPM)
   chip.

9.5.  Blindly Authenticating a Bootstrap Server

   This document allows a device to blindly authenticate a bootstrap
   server's TLS certificate.  It does so to allow for cases where the
   redirect information may be obtained in an unsecured manner, which is
   desirable to support in some cases.

   To compensate for this, this document requires that devices, when
   connected to an untrusted bootstrap server, assert that data
   downloaded from the server is signed.

9.6.  Disclosing Information to Untrusted Servers

   This document allows devices to establish connections to untrusted
   bootstrap servers.  However, since the bootstrap server is untrusted,
   it may be under the control of an adversary, and therefore devices
   SHOULD be cautious about the data they send to the bootstrap server
   in such cases.

   Devices send different data to bootstrap servers at each of the
   protocol layers TCP, TLS, HTTP, and RESTCONF.

   At the TCP protocol layer, devices may relay their IP address,
   subject to network translations.  Disclosure of this information is
   not considered a security risk.

   At the TLS protocol layer, devices may use a client certificate to
   identify and authenticate themselves to untrusted bootstrap servers.
   At a minimum, the client certificate must disclose the device's
   serial number, and may disclose additional information such as the
   device's manufacturer, hardware model, public key, etc.  Knowledge of
   this information may provide an adversary with details needed to
   launch an attack.  It is RECOMMENDED that secrecy of the network
   constituency is not relied on for security.

   At the HTTP protocol layer, devices may use an HTTP authentication
   scheme to identify and authenticate themselves to untrusted bootstrap
   servers.  At a minimum, the authentication scheme must disclose the
   device's serial number and, concerningly, may, depending on the
   authentication mechanism used, reveal a secret that is only supposed
   to be known to the device (e.g., a password).  Devices SHOULD NOT use
   an HTTP authentication scheme (e.g., HTTP Basic) with an untrusted




Watsen, et al.            Expires July 19, 2019                [Page 60]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   bootstrap server that reveals a secret that is only supposed to be
   known to the device.

   At the RESTCONF protocol layer, devices use the "get-bootstrapping-
   data" RPC, but not the "report-progress" RPC, when connected to an
   untrusted bootstrap server.  The "get-bootstrapping-data" RPC allows
   additional input parameters to be passed to the bootstrap server
   (e.g., "os-name", "os-version", "hw-model").  It is RECOMMENDED that
   devices only pass the "signed-data-preferred" input parameter to an
   untrusted bootstrap server.  While it is okay for a bootstrap server
   to immediately return signed onboarding information, it is
   RECOMMENDED that bootstrap servers instead promote the untrusted
   connection to a trusted connection, as described in Appendix B, thus
   enabling the device to use the "report-progress" RPC while processing
   the onboarding information.

9.7.  Sequencing Sources of Bootstrapping Data

   For devices supporting more than one source for bootstrapping data,
   no particular sequencing order has to be observed for security
   reasons, as the solution for each source is considered equally
   secure.  However, from a privacy perspective, it is RECOMMENDED that
   devices access local sources before accessing remote sources.

9.8.  Safety of Private Keys used for Trust

   The solution presented in this document enables bootstrapping data to
   be trusted in two ways, either through transport level security or
   through the signing of artifacts.

   When transport level security (i.e., a trusted bootstrap server) is
   used, the private key for the end-entity certificate must be online
   in order to establish the TLS connection.

   When artifacts are signed, the signing key is required to be online
   only when the bootstrap server is returning a dynamically generated
   signed-data response.  For instance, a bootstrap server, upon
   receiving the "signed-data-preferred" input parameter to the "get-
   bootstrapping-data" RPC, may dynamically generate a response that is
   signed.

   Bootstrap server administrators are RECOMMENDED to follow best
   practice to protect the private key used for any online operation.
   For instance, use of a hardware security module (HSM) is RECOMMENDED.
   If an HSM is not used, frequent private key refreshes are
   RECOMMENDED, assuming all bootstrapping devices have an accurate
   clock (see Section 9.1).




Watsen, et al.            Expires July 19, 2019                [Page 61]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   For best security, it is RECOMMENDED that owners only provide
   bootstrapping data that has been signed, using a protected private
   key, and encrypted, using the device's public key from its secure
   device identity certificate.

9.9.  Increased Reliance on Manufacturers

   The SZTP bootstrapping protocol presented in this document shifts
   some control of initial configuration away from the rightful owner of
   the device and towards the manufacturer and its delegates.

   The manufacturer maintains the list of well-known bootstrap servers
   its devices will trust.  By design, if no bootstrapping data is found
   via other methods first, the device will try to reach out to the
   well-known bootstrap servers.  There is no mechanism to prevent this
   from occurring other than by using an external firewall to block such
   connections.  Concerns related to trusted bootstrap servers are
   discussed in Section 9.10.

   Similarly, the manufacturer maintains the list of voucher signing
   authorities its devices will trust.  The voucher signing authorities
   issue the vouchers that enable a device to trust an owner's domain
   certificate.  It is vital that manufacturers ensure the integrity of
   these voucher signing authorities, so as to avoid incorrect
   assignments.

   Operators should be aware that this system assumes that they trust
   all the pre-configured bootstrap servers and voucher signing
   authorities designated by the manufacturers.  While operators may use
   points in the network to block access to the well-known bootstrap
   servers, operators cannot prevent voucher signing authorities from
   generating vouchers for their devices.

9.10.  Concerns with Trusted Bootstrap Servers

   Trusted bootstrap servers, whether well-known or discovered, have the
   potential to cause problems, such as the following.

   o  A trusted bootstrap server that has been compromised may be
      modified to return unsigned data of any sort.  For instance, a
      bootstrap server that is only suppose to return redirect
      information might be modified to return onboarding information.
      Similarly, a bootstrap server that is only supposed to return
      signed data, may be modified to return unsigned data.  In both
      cases, the device will accept the response, unaware that it wasn't
      supposed to be any different.  It is RECOMMENDED that maintainers
      of trusted bootstrap servers ensure that their systems are not
      easily compromised and, in case of compromise, have mechanisms in



Watsen, et al.            Expires July 19, 2019                [Page 62]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


      place to detect and remediate the compromise as expediently as
      possible.

   o  A trusted bootstrap server hosting either unsigned, or signed but
      not encrypted, data may disclose information to unwanted parties
      (e.g., an administrator of the bootstrap server).  This is a
      privacy issue only, but could reveal information that might be
      used in a subsequent attack.  Disclosure of redirect information
      has limited exposure (it is just a list of bootstrap servers),
      whereas disclosure of onboarding information could be highly
      revealing (e.g., network topology, firewall policies, etc.).  It
      is RECOMMENDED that operators encrypt the bootstrapping data when
      its contents are considered sensitive, even to the point of hiding
      it from the administrators of the bootstrap server, which may be
      maintained by a 3rd-party.

9.11.  Validity Period for Conveyed Information

   The conveyed information artifact does not specify a validity period.
   For instance, neither redirect information nor onboarding information
   enable "not-before" or "not-after" values to be specified, and
   neither artifact alone can be revoked.

   For unsigned data provided by an untrusted source of bootstrapping
   data, it is not meaningful to discuss its validity period when the
   information itself has no authenticity and may have come from
   anywhere.

   For unsigned data provided by a trusted source of bootstrapping data
   (i.e., a bootstrap server), the availability of the data is the only
   measure of it being current.  Since the untrusted data comes from a
   trusted source, its current availability is meaningful and, since
   bootstrap servers use TLS, the contents of the exchange cannot be
   modified or replayed.

   For signed data, whether provided by an untrusted or trusted source
   of bootstrapping data, the validity is constrained by the validity of
   the both the ownership voucher and owner certificate used to
   authenticate it.

   The ownership voucher's validity is primarily constrained by the
   ownership voucher's "created-on" and "expires-on" nodes.  While
   [RFC8366] recommends short-lived vouchers (see Section 6.1), the
   "expires-on" node may be set to any point in the future, or omitted
   altogether to indicate that the voucher never expires.  The ownership
   voucher's validity is secondarily constrained by the manufacturer's
   PKI used to sign the voucher; whilst an ownership voucher cannot be
   revoked directly, the PKI used to sign it may be.



Watsen, et al.            Expires July 19, 2019                [Page 63]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   The owner certificate's validity is primarily constrained by the
   X.509's validity field, the "notBefore" and "notAfter" values, as
   specified by the certificate authority that signed it.  The owner
   certificate's validity is secondarily constrained by the validity of
   the PKI used to sign the voucher.  Owner certificates may be revoked
   directly.

   For owners that wish to have maximum flexibility in their ability to
   specify and constrain the validity of signed data, it is RECOMMENDED
   that a unique owner certificate is created for each signed artifact.
   Not only does this enable a validity period to be specified, for each
   artifact, but it also enables to the validity of each artifact to be
   revoked.

9.12.  Cascading Trust via Redirects

   Redirect Information (Section 2.1), by design, instructs a
   bootstrapping device to initiate a HTTPS connection to the specified
   bootstrap servers.

   When the redirect information is trusted, the redirect information
   can encode a trust anchor certificate used by the device to
   authenticate the TLS end-entity certificate presented by each
   bootstrap server.

   As a result, any compromise in an interaction providing redirect
   information may result in compromise of all subsequent interactions.

9.13.  Possible Reuse of Private Keys

   This document describes two uses for secure device identity
   certificates.

   The primary use is for when the device authenticates itself to a
   bootstrap server, using its private key for TLS-level client-
   certificate based authentication.

   A secondary use is for when the device needs to decrypt provided
   bootstrapping artifacts, using its private key to decrypt the data
   or, more precisely, per Section 6 in [RFC5652], decrypt a symmetric
   key used to decrypt the data.

   This document, in Section 3.4 allows for the possibility that the
   same secure device identity certificate is used for both uses, as
   [Std-802.1AR-2018] states that a DevID certificate MAY have the
   "keyEncipherment" KeyUsage bit, in addition to the "digitalSignature"
   KeyUsage bit, set.




Watsen, et al.            Expires July 19, 2019                [Page 64]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   While it is understood that it is generally frowned upon to reuse
   private keys, this document views such reuse acceptable as there are
   not any known ways to cause a signature made in one context to be
   (mis)interpreted as valid in the other context.

9.14.  Non-Issue with Encrypting Signed Artifacts

   This document specifies the encryption of signed objects, as opposed
   to the signing of encrypted objects, as might be expected given well-
   publicized oracle attacks (e.g., the padding oracle attack).

   This document does not view such attacks as feasible in the context
   of the solution because the decrypted text never leaves the device.

9.15.  The "ietf-sztp-conveyed-info" YANG Module

   The ietf-sztp-conveyed-info module defined in this document defines a
   data structure that is always wrapped by a CMS structure.  When
   accessed by a secure mechanism (e.g., protected by TLS), then the CMS
   structure may be unsigned.  However, when accessed by an insecure
   mechanism (e.g., removable storage device), then the CMS structure
   must be signed, in order for the device to trust it.

   Implementations should be aware that signed bootstrapping data only
   protects the data from modification, and that the contents are still
   visible to others.  This doesn't affect security so much as privacy.
   That the contents may be read by unintended parties when accessed by
   insecure mechanisms is considered next.

   The ietf-sztp-conveyed-info module defines a top-level "choice"
   statement that declares the contents are either "redirect-
   information" or "onboarding-information".  Each of these two cases
   are now considered.

   When the content of the CMS structure is redirect-information, an
   observer can learn about the bootstrap servers the device is being
   directed to, their IP addresses or hostnames, ports, and trust anchor
   certificates.  Knowledge of this information could provide an
   observer some insight into a network's inner structure.

   When the content of the CMS structure is onboarding information, an
   observer could learn considerable information about how the device is
   to be provisioned.  This information includes the operating system
   version, initial configuration, and script contents.  This
   information should be considered sensitive and precautions should be
   taken to protect it (e.g., encrypt the artifact using the device's
   public key).




Watsen, et al.            Expires July 19, 2019                [Page 65]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


9.16.  The "ietf-sztp-bootstrap-server" YANG Module

   The ietf-sztp-bootstrap-server module defined in this document
   specifies an API for a RESTCONF [RFC8040].  The lowest RESTCONF layer
   is HTTPS, and the mandatory-to-implement secure transport is TLS
   [RFC8446].

   The NETCONF Access Control Model (NACM) [RFC8341] provides the means
   to restrict access for particular users to a preconfigured subset of
   all available protocol operations and content.

   This module presents no data nodes (only RPCs).  There is no need to
   discuss the sensitivity of data nodes.

   This module defines two RPC operations that may be considered
   sensitive in some network environments.  These are the operations and
   their sensitivity/vulnerability:

   get-bootstrapping-data:  This RPC is used by devices to obtain their
       bootstrapping data.  By design, each device, as identified by its
       authentication credentials (e.g. client certificate), can only
       obtain its own data.  NACM is not needed to further constrain
       access to this RPC.

   report-progress:  This RPC is used by devices to report their
       bootstrapping progress.  By design, each device, as identified by
       its authentication credentials (e.g. client certificate), can
       only report data for itself.  NACM is not needed to further
       constrain access to this RPC.

10.  IANA Considerations

10.1.  The IETF XML Registry

   This document registers two URIs in the "ns" subregistry of the IETF
   XML Registry [RFC3688] maintained at
   https://www.iana.org/assignments/xml-registry/xml-registry.xhtml#ns.
   Following the format in [RFC3688], the following registrations are
   requested:

        URI: urn:ietf:params:xml:ns:yang:ietf-sztp-conveyed-info
        Registrant Contact: The NETCONF WG of the IETF.
        XML: N/A, the requested URI is an XML namespace.

        URI: urn:ietf:params:xml:ns:yang:ietf-sztp-bootstrap-server
        Registrant Contact: The NETCONF WG of the IETF.
        XML: N/A, the requested URI is an XML namespace.




Watsen, et al.            Expires July 19, 2019                [Page 66]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


10.2.  The YANG Module Names Registry

   This document registers two YANG modules in the YANG Module Names
   registry [RFC6020] maintained at https://www.iana.org/assignments/
   yang-parameters/yang-parameters.xhtml.  Following the format defined
   in [RFC6020], the below registrations are requested:

     name:      ietf-sztp-conveyed-info
     namespace: urn:ietf:params:xml:ns:yang:ietf-sztp-conveyed-info
     prefix:    sztp-info
     reference: RFC XXXX

     name:      ietf-sztp-bootstrap-server
     namespace: urn:ietf:params:xml:ns:yang:ietf-sztp-bootstrap-server
     prefix:    sztp-svr
     reference: RFC XXXX

10.3.  The SMI Security for S/MIME CMS Content Type Registry

   This document registers two SMI security codes in the "SMI Security
   for S/MIME CMS Content Type" registry (1.2.840.113549.1.9.16.1)
   maintained at https://www.iana.org/assignments/smi-numbers/smi-
   numbers.xhtml#security-smime-1.  Following the format used in
   Section 3.4 of [RFC7107], the below registrations are requested:

             Decimal   Description                  References
             -------   --------------------------   ----------
             TBD1      id-ct-sztpConveyedInfoXML    [RFCXXXX]
             TBD2      id-ct-sztpConveyedInfoJSON   [RFCXXXX]

   id-ct-sztpConveyedInfoXML indicates that the "conveyed-information"
   is encoded using XML.  id-ct-sztpConveyedInfoJSON indicates that the
   "conveyed-information" is encoded using JSON.

10.4.  The BOOTP Manufacturer Extensions and DHCP Options Registry

   This document registers one DHCP code point in the "BOOTP
   Manufacturer Extensions and DHCP Options" registry maintained at
   http://www.iana.org/assignments/bootp-dhcp-parameters.  Following the
   format used by other registrations, the below registration is
   requested:

             Tag:         143
             Name:        OPTION_V4_SZTP_REDIRECT
             Data Length: N
             Meaning:     This option provides a list of URIs
                          for SZTP bootstrap servers
             Reference:   [RFCXXXX]



Watsen, et al.            Expires July 19, 2019                [Page 67]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   Note: this request is to make permanent a previously registered early
   code point allocation.

10.5.  The Dynamic Host Configuration Protocol for IPv6 (DHCPv6)
       Registry

   This document registers one DHCP code point in "Option Codes"
   subregistry of the "Dynamic Host Configuration Protocol for IPv6
   (DHCPv6)" registry maintained at http://www.iana.org/assignments/
   dhcpv6-parameters.  Following the format used by other registrations,
   the below registration is requested:

                 Value:            136
                 Description:      OPTION_V6_SZTP_REDIRECT
                 Client ORO:       Yes
                 Singleton Option: Yes
                 Reference:        [RFCXXXX]

   Note: this request is to make permanent a previously registered early
   code point allocation.

10.6.  The Service Name and Transport Protocol Port Number Registry

   This document registers one service name in the Service Name and
   Transport Protocol Port Number Registry [RFC6335] maintained at
   https://www.iana.org/assignments/service-names-port-numbers/service-
   names-port-numbers.xhtml.  Following the format defined in
   Section 8.1.1 of [RFC6335], the below registration is requested:

    Service Name:            sztp
    Transport Protocol(s):   TCP
    Assignee:                IESG <iesg@ietf.org>
    Contact:                 IETF Chair <chair@ietf.org>
    Description:             This service name is used to construct the
                             SRV service label "_sztp" for discovering
                             SZTP bootstrap servers.
    Reference:               [RFCXXXX]
    Port Number:             N/A
    Service Code:            N/A
    Known Unauthorized Uses: N/A
    Assignment Notes:        This protocol uses HTTPS as a substrate.

10.7.  The DNS Underscore Global Scoped Entry Registry

   This document registers one service name in the DNS Underscore Global
   Scoped Entry Registry [I-D.ietf-dnsop-attrleaf] maintained at
   TBD_IANA_URL.  Following the format defined in Section 4.3 of
   [I-D.ietf-dnsop-attrleaf], the below registration is requested:



Watsen, et al.            Expires July 19, 2019                [Page 68]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


                       RR Type:            TXT
                       _NODE NAME:         _sztp
                       Reference:          [RFCXXXX]

11.  References

11.1.  Normative References

   [I-D.ietf-dnsop-attrleaf]
              Crocker, D., "DNS Scoped Data Through "Underscore" Naming
              of Attribute Leaves", draft-ietf-dnsop-attrleaf-16 (work
              in progress), November 2018.

   [ITU.X690.2015]
              International Telecommunication Union, "Information
              Technology - ASN.1 encoding rules: Specification of Basic
              Encoding Rules (BER), Canonical Encoding Rules (CER) and
              Distinguished Encoding Rules (DER)", ITU-T Recommendation
              X.690, ISO/IEC 8825-1, August 2015,
              <https://www.itu.int/rec/T-REC-X.690/>.

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
              November 1987, <https://www.rfc-editor.org/info/rfc1035>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC2782]  Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for
              specifying the location of services (DNS SRV)", RFC 2782,
              DOI 10.17487/RFC2782, February 2000,
              <https://www.rfc-editor.org/info/rfc2782>.

   [RFC3396]  Lemon, T. and S. Cheshire, "Encoding Long Options in the
              Dynamic Host Configuration Protocol (DHCPv4)", RFC 3396,
              DOI 10.17487/RFC3396, November 2002,
              <https://www.rfc-editor.org/info/rfc3396>.

   [RFC4253]  Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
              Transport Layer Protocol", RFC 4253, DOI 10.17487/RFC4253,
              January 2006, <https://www.rfc-editor.org/info/rfc4253>.








Watsen, et al.            Expires July 19, 2019                [Page 69]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
              <https://www.rfc-editor.org/info/rfc5280>.

   [RFC5652]  Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
              RFC 5652, DOI 10.17487/RFC5652, September 2009,
              <https://www.rfc-editor.org/info/rfc5652>.

   [RFC6020]  Bjorklund, M., Ed., "YANG - A Data Modeling Language for
              the Network Configuration Protocol (NETCONF)", RFC 6020,
              DOI 10.17487/RFC6020, October 2010,
              <https://www.rfc-editor.org/info/rfc6020>.

   [RFC6125]  Saint-Andre, P. and J. Hodges, "Representation and
              Verification of Domain-Based Application Service Identity
              within Internet Public Key Infrastructure Using X.509
              (PKIX) Certificates in the Context of Transport Layer
              Security (TLS)", RFC 6125, DOI 10.17487/RFC6125, March
              2011, <https://www.rfc-editor.org/info/rfc6125>.

   [RFC6762]  Cheshire, S. and M. Krochmal, "Multicast DNS", RFC 6762,
              DOI 10.17487/RFC6762, February 2013,
              <https://www.rfc-editor.org/info/rfc6762>.

   [RFC6991]  Schoenwaelder, J., Ed., "Common YANG Data Types",
              RFC 6991, DOI 10.17487/RFC6991, July 2013,
              <https://www.rfc-editor.org/info/rfc6991>.

   [RFC7227]  Hankins, D., Mrugalski, T., Siodelski, M., Jiang, S., and
              S. Krishnan, "Guidelines for Creating New DHCPv6 Options",
              BCP 187, RFC 7227, DOI 10.17487/RFC7227, May 2014,
              <https://www.rfc-editor.org/info/rfc7227>.

   [RFC7230]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing",
              RFC 7230, DOI 10.17487/RFC7230, June 2014,
              <https://www.rfc-editor.org/info/rfc7230>.

   [RFC7950]  Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <https://www.rfc-editor.org/info/rfc7950>.

   [RFC8040]  Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <https://www.rfc-editor.org/info/rfc8040>.




Watsen, et al.            Expires July 19, 2019                [Page 70]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8366]  Watsen, K., Richardson, M., Pritikin, M., and T. Eckert,
              "A Voucher Artifact for Bootstrapping Protocols",
              RFC 8366, DOI 10.17487/RFC8366, May 2018,
              <https://www.rfc-editor.org/info/rfc8366>.

   [RFC8415]  Mrugalski, T., Siodelski, M., Volz, B., Yourtchenko, A.,
              Richardson, M., Jiang, S., Lemon, T., and T. Winters,
              "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)",
              RFC 8415, DOI 10.17487/RFC8415, November 2018,
              <https://www.rfc-editor.org/info/rfc8415>.

   [Std-802.1AR-2018]
              IEEE SA-Standards Board, "IEEE Standard for Local and
              metropolitan area networks - Secure Device Identity", June
              2018,
              <https://standards.ieee.org/standard/802_1AR-2018.html>.

11.2.  Informative References

   [I-D.ietf-netconf-crypto-types]
              Watsen, K. and H. Wang, "Common YANG Data Types for
              Cryptography", draft-ietf-netconf-crypto-types-02 (work in
              progress), October 2018.

   [I-D.ietf-netconf-trust-anchors]
              Watsen, K., "YANG Data Model for Global Trust Anchors",
              draft-ietf-netconf-trust-anchors-02 (work in progress),
              October 2018.

   [I-D.ietf-ntp-using-nts-for-ntp]
              Franke, D., Sibold, D., Teichel, K., Dansarie, M., and R.
              Sundblad, "Network Time Security for the Network Time
              Protocol", draft-ietf-ntp-using-nts-for-ntp-15 (work in
              progress), December 2018.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC4250]  Lehtinen, S. and C. Lonvick, Ed., "The Secure Shell (SSH)
              Protocol Assigned Numbers", RFC 4250,
              DOI 10.17487/RFC4250, January 2006,
              <https://www.rfc-editor.org/info/rfc4250>.




Watsen, et al.            Expires July 19, 2019                [Page 71]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   [RFC6187]  Igoe, K. and D. Stebila, "X.509v3 Certificates for Secure
              Shell Authentication", RFC 6187, DOI 10.17487/RFC6187,
              March 2011, <https://www.rfc-editor.org/info/rfc6187>.

   [RFC6234]  Eastlake 3rd, D. and T. Hansen, "US Secure Hash Algorithms
              (SHA and SHA-based HMAC and HKDF)", RFC 6234,
              DOI 10.17487/RFC6234, May 2011,
              <https://www.rfc-editor.org/info/rfc6234>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/info/rfc6241>.

   [RFC6335]  Cotton, M., Eggert, L., Touch, J., Westerlund, M., and S.
              Cheshire, "Internet Assigned Numbers Authority (IANA)
              Procedures for the Management of the Service Name and
              Transport Protocol Port Number Registry", BCP 165,
              RFC 6335, DOI 10.17487/RFC6335, August 2011,
              <https://www.rfc-editor.org/info/rfc6335>.

   [RFC6698]  Hoffman, P. and J. Schlyter, "The DNS-Based Authentication
              of Named Entities (DANE) Transport Layer Security (TLS)
              Protocol: TLSA", RFC 6698, DOI 10.17487/RFC6698, August
              2012, <https://www.rfc-editor.org/info/rfc6698>.

   [RFC6763]  Cheshire, S. and M. Krochmal, "DNS-Based Service
              Discovery", RFC 6763, DOI 10.17487/RFC6763, February 2013,
              <https://www.rfc-editor.org/info/rfc6763>.

   [RFC6891]  Damas, J., Graff, M., and P. Vixie, "Extension Mechanisms
              for DNS (EDNS(0))", STD 75, RFC 6891,
              DOI 10.17487/RFC6891, April 2013,
              <https://www.rfc-editor.org/info/rfc6891>.

   [RFC6960]  Santesson, S., Myers, M., Ankney, R., Malpani, A.,
              Galperin, S., and C. Adams, "X.509 Internet Public Key
              Infrastructure Online Certificate Status Protocol - OCSP",
              RFC 6960, DOI 10.17487/RFC6960, June 2013,
              <https://www.rfc-editor.org/info/rfc6960>.

   [RFC7107]  Housley, R., "Object Identifier Registry for the S/MIME
              Mail Security Working Group", RFC 7107,
              DOI 10.17487/RFC7107, January 2014,
              <https://www.rfc-editor.org/info/rfc7107>.






Watsen, et al.            Expires July 19, 2019                [Page 72]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   [RFC7766]  Dickinson, J., Dickinson, S., Bellis, R., Mankin, A., and
              D. Wessels, "DNS Transport over TCP - Implementation
              Requirements", RFC 7766, DOI 10.17487/RFC7766, March 2016,
              <https://www.rfc-editor.org/info/rfc7766>.

   [RFC8071]  Watsen, K., "NETCONF Call Home and RESTCONF Call Home",
              RFC 8071, DOI 10.17487/RFC8071, February 2017,
              <https://www.rfc-editor.org/info/rfc8071>.

   [RFC8340]  Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
              BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
              <https://www.rfc-editor.org/info/rfc8340>.

   [RFC8341]  Bierman, A. and M. Bjorklund, "Network Configuration
              Access Control Model", STD 91, RFC 8341,
              DOI 10.17487/RFC8341, March 2018,
              <https://www.rfc-editor.org/info/rfc8341>.

   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.






























Watsen, et al.            Expires July 19, 2019                [Page 73]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


Appendix A.  Example Device Data Model

   This section defines a non-normative data model that enables the
   configuration of SZTP bootstrapping and discovery of what parameters
   are used by a device's bootstrapping logic.

A.1.  Data Model Overview

   The following tree diagram provides an overview for the SZTP device
   data model.

    module: example-device-data-model
      +--rw sztp
         +--rw enabled?                          boolean
         +--ro idevid-certificate?               ct:end-entity-cert-cms
         |       {bootstrap-servers}?
         +--ro bootstrap-servers {bootstrap-servers}?
         |  +--ro bootstrap-server* [address]
         |     +--ro address    inet:host
         |     +--ro port?      inet:port-number
         +--ro bootstrap-server-trust-anchors {bootstrap-servers}?
         |  +--ro reference*   ta:pinned-certificates-ref
         +--ro voucher-trust-anchors {signed-data}?
            +--ro reference*   ta:pinned-certificates-ref

   In the above diagram, notice that there is only one configurable node
   "enabled".  The expectation is that this node would be set to "true"
   in device's factory default configuration and that it would either be
   set to "false" or deleted when the SZTP bootstrapping is longer
   needed.

A.2.  Example Usage

   Following is an instance example for this data model.

















Watsen, et al.            Expires July 19, 2019                [Page 74]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   <sztp xmlns="https://example.com/sztp-device-data-model">
     <enabled>true</enabled>
     <idevid-certificate>base64encodedvalue==</idevid-certificate>
     <bootstrap-servers>
       <bootstrap-server>
         <address>sztp1.example.com</address>
         <port>8443</port>
       </bootstrap-server>
       <bootstrap-server>
         <address>sztp2.example.com</address>
         <port>8443</port>
       </bootstrap-server>
       <bootstrap-server>
         <address>sztp3.example.com</address>
         <port>8443</port>
       </bootstrap-server>
     </bootstrap-servers>
     <bootstrap-server-trust-anchors>
       <reference>manufacturers-root-ca-certs</reference>
     </bootstrap-server-trust-anchors>
     <voucher-trust-anchors>
       <reference>manufacturers-root-ca-certs</reference>
     </voucher-trust-anchors>
   </sztp>

A.3.  YANG Module

   The device model is defined by the YANG module defined in this
   section.

   This module uses data types defined in [RFC6991],
   [I-D.ietf-netconf-crypto-types], and
   [I-D.ietf-netconf-trust-anchors].

   module example-device-data-model {
     yang-version 1.1;
     namespace "https://example.com/sztp-device-data-model";
     prefix sztp-ddm;

     import ietf-inet-types {
       prefix inet;
       reference "RFC 6991: Common YANG Data Types";
     }

     import ietf-crypto-types {
       prefix ct;
       revision-date 2018-06-04;
       description



Watsen, et al.            Expires July 19, 2019                [Page 75]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


        "This revision is defined in the -00 version of
         draft-ietf-netconf-crypto-types";
       reference
        "draft-ietf-netconf-crypto-types:
           Common YANG Data Types for Cryptography";
     }

     import ietf-trust-anchors {
       prefix ta;
       revision-date 2018-06-04;
       description
        "This revision is defined in -00 version of
         draft-ietf-netconf-trust-anchors.";
       reference
        "draft-ietf-netconf-trust-anchors:
           YANG Data Model for Global Trust Anchors";
     }

     organization
       "Example Corporation";

     contact
       "Author: Bootstrap Admin <mailto:admin@example.com>";

     description
       "This module defines a data model to enable SZTP
        bootstrapping and discover what parameters are used.
        This module assumes the use of an IDevID certificate,
        as opposed to any other client certificate, or the
        use of an HTTP-based client authentication scheme.";

     revision 2019-01-15 {
       description
         "Initial version";
       reference
         "RFC XXXX: Secure Zero Touch Provisioning (SZTP)";
     }

     // features

     feature bootstrap-servers {
       description
         "The device supports bootstrapping off bootstrap servers.";
     }

     feature signed-data {
       description
         "The device supports bootstrapping off signed data.";



Watsen, et al.            Expires July 19, 2019                [Page 76]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


     }

     // protocol accessible nodes

     container sztp {
       description
         "Top-level container for SZTP data model.";
       leaf enabled {
         type boolean;
         default false;
         description
           "The 'enabled' leaf controls if SZTP bootstrapping is
            enabled or disabled.  The default is 'false' so that, when
            not enabled, which is most of the time, no configuration
            is needed.";
       }
       leaf idevid-certificate {
         if-feature bootstrap-servers;
         type ct:end-entity-cert-cms;
         config false;
         description
           "This CMS structure contains the IEEE 802.1AR-2009
            IDevID certificate itself, and all intermediate
            certificates leading up to, and optionally including,
            the manufacturer's well-known trust anchor certificate
            for IDevID certificates.  The well-known trust anchor
            does not have to be a self-signed certificate.";
         reference
           "IEEE 802.1AR-2009:
              IEEE Standard for Local and metropolitan area
              networks - Secure Device Identity.";
       }
       container bootstrap-servers {
         if-feature bootstrap-servers;
         config false;
         description
           "List of bootstrap servers this device will attempt
            to reach out to when bootstrapping.";
         list bootstrap-server {
           key "address";
           description
             "A bootstrap server entry.";
           leaf address {
             type inet:host;
             mandatory true;
             description
               "The IP address or hostname of the bootstrap server the
                device should redirect to.";



Watsen, et al.            Expires July 19, 2019                [Page 77]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


           }
           leaf port {
             type inet:port-number;
             default "443";
             description
               "The port number the bootstrap server listens on.  If no
                port is specified, the IANA-assigned port for 'https'
                (443) is used.";
           }
         }
       }
       container bootstrap-server-trust-anchors {
         if-feature bootstrap-servers;
         config false;
         description "Container for a list of trust anchor references.";
         leaf-list reference {
           type ta:pinned-certificates-ref;
           description
             "A reference to a list of pinned certificate authority (CA)
              certificates that the device uses to validate bootstrap
              servers with.";
         }
       }
       container voucher-trust-anchors {
         if-feature signed-data;
         config false;
         description "Container for a list of trust anchor references.";
         leaf-list reference {
           type ta:pinned-certificates-ref;
           description
             "A reference to a list of pinned certificate authority (CA)
              certificates that the device uses to validate ownership
              vouchers with.";
         }
       }
     }
   }

Appendix B.  Promoting a Connection from Untrusted to Trusted

   The following diagram illustrates a sequence of bootstrapping
   activities that promote an untrusted connection to a bootstrap server
   to a trusted connection to the same bootstrap server.  This enables a
   device to limit the amount of information it might disclose to an
   adversary hosting an untrusted bootstrap server.






Watsen, et al.            Expires July 19, 2019                [Page 78]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


                                                         +----------+
                                                         |Deployment|
                                                         | Specific |
   +------+                                              |Bootstrap |
   |Device|                                              |  Server  |
   +------+                                              +----------+
      |                                                        |
      | 1. "HTTPS" Request ("signed-data-preferred", nonce)    |
      |------------------------------------------------------->|
      | 2. "HTTPS" Response (signed redirect information)      |
      |<-------------------------------------------------------|
      |                                                        |
      |                                                        |
      | 3. HTTPS Request (os-name=xyz, os-version=123, etc.)   |
      |------------------------------------------------------->|
      | 4. HTTPS Response (unsigned onboarding information     |
      |<-------------------------------------------------------|
      |                                                        |

   The interactions in the above diagram are described below.

   1.  The device initiates an untrusted connection to a bootstrap
       server, as is indicated by putting "HTTPS" in double quotes
       above.  It is still an HTTPS connection, but the device is unable
       to authenticate the bootstrap server's TLS certificate.  Because
       the device is unable to trust the bootstrap server, it sends the
       "signed-data-preferred" input parameter, and optionally also the
       "nonce" input parameter, in the "get-bootstrapping-data" RPC.
       The "signed-data-preferred" parameter informs the bootstrap
       server that the device does not trust it and may be holding back
       some additional input parameters from the server (e.g., other
       input parameters, progress reports, etc.).  The "nonce" input
       parameter enables the bootstrap server to dynamically obtain an
       ownership voucher from a MASA, which may be important for devices
       that do not have a reliable clock.

   2.  The bootstrap server, seeing the "signed-data-preferred" input
       parameter, knows that it can either send unsigned redirect
       information or signed data of any type.  But, in this case, the
       bootstrap server has the ability to sign data and chooses to
       respond with signed redirect information, not signed onboarding
       information as might be expected, securely redirecting the device
       back to it again.  Not displayed but, if the "nonce" input
       parameter was passed, the bootstrap server could dynamically
       connect to a download a voucher from the MASA having the nonce
       value in it.  Details regarding a protocol enabling this
       integration is outside the scope of this document.




Watsen, et al.            Expires July 19, 2019                [Page 79]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   3.  Upon validating the signed redirect information, the device
       establishes a secure connection to the bootstrap server.
       Unbeknownst to the device, it is the same bootstrap server it was
       connected to previously but, because the device is able to
       authenticate the bootstrap server this time, it sends its normal
       "get-bootstrapping-data" request (i.e., with additional input
       parameters) as well as its progress reports (not depicted).

   4.  This time, because the "signed-data-preferred" parameter was not
       passed, having access to all of the device's input parameters,
       the bootstrap server returns, in this example, unsigned
       onboarding information to the device.  Note also that, because
       the bootstrap server is now trusted, the device will send
       progress reports to the server.

Appendix C.  Workflow Overview

   The solution presented in this document is conceptualized to be
   composed of the non-normative workflows described in this section.
   Implementation details are expected to vary.  Each diagram is
   followed by a detailed description of the steps presented in the
   diagram, with further explanation on how implementations may vary.

C.1.  Enrollment and Ordering Devices

   The following diagram illustrates key interactions that may occur
   from when a prospective owner enrolls in a manufacturer's SZTP
   program to when the manufacturer ships devices for an order placed by
   the prospective owner.






















Watsen, et al.            Expires July 19, 2019                [Page 80]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


                                  +-----------+
   +------------+                 |Prospective|                    +---+
   |Manufacturer|                 |   Owner   |                    |NMS|
   +------------+                 +-----------+                    +---+
         |                              |                            |
         |                              |                            |
         |  1. initiate enrollment      |                            |
         #<-----------------------------|                            |
         #                              |                            |
         #                              |                            |
         #     IDevID trust anchor      |                            |
         #----------------------------->#  set IDevID trust anchor   |
         #                              #--------------------------->|
         #                              |                            |
         #     bootstrap server         |                            |
         #     account credentials      |                            |
         #----------------------------->#  set credentials           |
         |                              #--------------------------->|
         |                              |                            |
         |                              |                            |
         |  2. set owner certificate trust anchor                    |
         |<----------------------------------------------------------|
         |                              |                            |
         |                              |                            |
         |  3. place device order       |                            |
         |<-----------------------------#  model devices             |
         |                              #--------------------------->|
         |                              |                            |
         |  4. ship devices and send    |                            |
         |     device identifiers and   |                            |
         |     ownership vouchers       |                            |
         |----------------------------->#  set device identifiers    |
         |                              #  and ownership vouchers    |
         |                              #--------------------------->|
         |                              |                            |

   Each numbered item below corresponds to a numbered item in the
   diagram above.

   1.  A prospective owner of a manufacturer's devices initiates an
       enrollment process with the manufacturer.  This process includes
       the following:

       *  Regardless how the prospective owner intends to bootstrap
          their devices, they will always obtain from the manufacturer
          the trust anchor certificate for the IDevID certificates.
          This certificate will is installed on the prospective owner's




Watsen, et al.            Expires July 19, 2019                [Page 81]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


          NMS so that the NMS can authenticate the IDevID certificates
          when they are presented to subsequent steps.

       *  If the manufacturer hosts an Internet based bootstrap server
          (e.g., a redirect server) such as described in Section 4.4,
          then credentials necessary to configure the bootstrap server
          would be provided to the prospective owner.  If the bootstrap
          server is configurable through an API (outside the scope of
          this document), then the credentials might be installed on the
          prospective owner's NMS so that the NMS can subsequently
          configure the manufacturer-hosted bootstrap server directly.

   2.  If the manufacturer's devices are able to validate signed data
       (Section 5.4), and assuming that the prospective owner's NMS is
       able to prepare and sign the bootstrapping data itself, the
       prospective owner's NMS might set a trust anchor certificate onto
       the manufacturer's bootstrap server, using the credentials
       provided in the previous step.  This certificate is the trust
       anchor certificate that the prospective owner would like the
       manufacturer to place into the ownership vouchers it generates,
       thereby enabling devices to trust the owner's owner certificate.
       How this trust anchor certificate is used to enable devices to
       validate signed bootstrapping data is described in Section 5.4.

   3.  Some time later, the prospective owner places an order with the
       manufacturer, perhaps with a special flag checked for SZTP
       handling.  At this time, or perhaps before placing the order, the
       owner may model the devices in their NMS, creating virtual
       objects for the devices with no real-world device associations.
       For instance the model can be used to simulate the device's
       location in the network and the configuration it should have when
       fully operational.

   4.  When the manufacturer fulfills the order, shipping the devices to
       their intended locations, they may notify the owner of the
       devices' serial numbers and shipping destinations, which the
       owner may use to stage the network for when the devices power on.
       Additionally, the manufacturer may send one or more ownership
       vouchers, cryptographically assigning ownership of those devices
       to the owner.  The owner may set this information on their NMS,
       perhaps binding specific modeled devices to the serial numbers
       and ownership vouchers.

C.2.  Owner Stages the Network for Bootstrap

   The following diagram illustrates how an owner might stage the
   network for bootstrapping devices.




Watsen, et al.            Expires July 19, 2019                [Page 82]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


               +----------+ +------------+
               |Deployment| |Manufacturer| +------+ +------+
               | Specific | |   Hosted   | | Local| | Local| +---------+
         +---+ |Bootstrap | | Bootstrap  | |  DNS | | DHCP | |Removable|
         |NMS| |  Server  | |   Server   | |Server| |Server| | Storage |
         +---+ +----------+ +------------+ +------+ +------+ +---------+
           |        |             |            |        |         |
   1.      |        |             |            |        |         |
   activate|        |             |            |        |         |
   modeled |        |             |            |        |         |
   device  |        |             |            |        |         |
   ------->|        |             |            |        |         |
           | 2. (optional)        |            |        |         |
           |    configure         |            |        |         |
           |    bootstrap         |            |        |         |
           |    server            |            |        |         |
           |------->|             |            |        |         |
           |        |             |            |        |         |
           | 3. (optional) configure           |        |         |
           |    bootstrap server  |            |        |         |
           |--------------------->|            |        |         |
           |        |             |            |        |         |
           |        |             |            |        |         |
           | 4. (optional) configure DNS server|        |         |
           |---------------------------------->|        |         |
           |        |             |            |        |         |
           |        |             |            |        |         |
           | 5. (optional) configure DHCP server        |         |
           |------------------------------------------->|         |
           |        |             |            |        |         |
           |        |             |            |        |         |
           | 6. (optional) store bootstrapping artifacts on media |
           |----------------------------------------------------->|
           |        |             |            |        |         |
           |        |             |            |        |         |

   Each numbered item below corresponds to a numbered item in the
   diagram above.

   1.  Having previously modeled the devices, including setting their
       fully operational configurations and associating device serial
       numbers and (optionally) ownership vouchers, the owner might
       "activate" one or more modeled devices.  That is, the owner tells
       the NMS to perform the steps necessary to prepare for when the
       real-world devices power up and initiate the bootstrapping
       process.  Note that, in some deployments, this step might be
       combined with the last step from the previous workflow.  Here it




Watsen, et al.            Expires July 19, 2019                [Page 83]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


       is depicted that an NMS performs the steps, but they may be
       performed manually or through some other mechanism.

   2.  If it is desired to use a deployment-specific bootstrap server,
       it must be configured to provide the bootstrapping data for the
       specific devices.  Configuring the bootstrap server may occur via
       a programmatic API not defined by this document.  Illustrated
       here as an external component, the bootstrap server may be
       implemented as an internal component of the NMS itself.

   3.  If it is desired to use a manufacturer hosted bootstrap server,
       it must be configured to provide the bootstrapping data for the
       specific devices.  The configuration must be either redirect or
       onboarding information.  That is, either the manufacturer hosted
       bootstrap server will redirect the device to another bootstrap
       server, or provide the device with the onboarding information
       itself.  The types of bootstrapping data the manufacturer hosted
       bootstrap server supports may vary by implementation; some
       implementations may only support redirect information, or only
       support onboarding information, or support both redirect and
       onboarding information.  Configuring the bootstrap server may
       occur via a programmatic API not defined by this document.

   4.  If it is desired to use a DNS server to supply bootstrapping
       data, a DNS server needs to be configured.  If multicast DNS-SD
       is desired, then the DNS server must reside on the local network,
       otherwise the DNS server may reside on a remote network.  Please
       see Section 4.2 for more information about how to configure DNS
       servers.  Configuring the DNS server may occur via a programmatic
       API not defined by this document.

   5.  If it is desired to use a DHCP server to supply bootstrapping
       data, a DHCP server needs to be configured.  The DHCP server may
       be accessed directly or via a DHCP relay.  Please see Section 4.3
       for more information about how to configure DHCP servers.
       Configuring the DHCP server may occur via a programmatic API not
       defined by this document.

   6.  If it is desired to use a removable storage device (e.g., USB
       flash drive) to supply bootstrapping data, the data would need to
       be placed onto it.  Please see Section 4.1 for more information
       about how to configure a removable storage device.

C.3.  Device Powers On

   The following diagram illustrates the sequence of activities that
   occur when a device powers on.




Watsen, et al.            Expires July 19, 2019                [Page 84]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


                                                     +----------+
                                      +-----------+  |Deployment|
                                      | Source of |  | Specific |
   +------+                           | Bootstrap |  |Bootstrap |  +---+
   |Device|                           |   Data    |  |  Server  |  |NMS|
   +------+                           +-----------+  +----------+  +---+
      |                                     |              |         |
      |                                     |              |         |
      | 1. if SZTP bootstrap service        |              |         |
      |    is not enabled, then exit.       |              |         |
      |                                     |              |         |
      | 2. for each source supported, check |              |         |
      |    for bootstrapping data.          |              |         |
      |------------------------------------>|              |         |
      |                                     |              |         |
      | 3. if onboarding information found, |              |         |
      |    initialize self and, only if     |              |         |
      |    source is a trusted bootstrap    |              |         |
      |    server, send progress reports.   |              |         |
      |------------------------------------>#              |         |
      |                                     # webhook      |         |
      |                                     #----------------------->|
      |                                                    |         |
      | 4. else if redirect-information found, for each    |         |
      |    bootstrap server specified, check for data.     |         |
      |-+------------------------------------------------->|         |
      | |                                                  |         |
      | | if more redirect-information is found, recurse   |         |
      | | (not depicted), else if onboarding information   |         |
      | | found, initialize self and post progress reports |         |
      | +------------------------------------------------->#         |
      |                                                    # webhook |
      |                                                    #-------->|
      |
      | 5. retry sources and/or wait for manual provisioning.
      |

   The interactions in the above diagram are described below.

   1.  Upon power being applied, the device checks to see if SZTP
       bootstrapping is configured, such as must be the case when
       running its "factory default" configuration.  If SZTP
       bootstrapping is not configured, then the bootstrapping logic
       exits and none of the following interactions occur.

   2.  For each source of bootstrapping data the device supports,
       preferably in order of closeness to the device (e.g., removable




Watsen, et al.            Expires July 19, 2019                [Page 85]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


       storage before Internet based servers), the device checks to see
       if there is any bootstrapping data for it there.

   3.  If onboarding information is found, the device initializes itself
       accordingly (e.g., installing a boot-image and committing an
       initial configuration).  If the source is a bootstrap server, and
       the bootstrap server can be trusted (i.e., TLS-level
       authentication), the device also sends progress reports to the
       bootstrap server.

       *  The contents of the initial configuration should configure an
          administrator account on the device (e.g., username, SSH
          public key, etc.), and should configure the device either to
          listen for NETCONF or RESTCONF connections or to initiate call
          home connections [RFC8071], and should disable the SZTP
          bootstrapping service (e.g., the "enabled" leaf in data model
          presented in Appendix A).

       *  If the bootstrap server supports forwarding device progress
          reports to external systems (e.g., via a webhook), a
          "bootstrap-complete" progress report (Section 7.3) informs the
          external system to know when it can, for instance, initiate a
          connection to the device.  To support this scenario further,
          the "bootstrap-complete" progress report may also relay the
          device's SSH host keys and/or TLS certificates, with which the
          external system can use to authenticate subsequent connections
          to the device.

       If the device successfully completes the bootstrapping process,
       it exits the bootstrapping logic without considering any
       additional sources of bootstrapping data.

   4.  Otherwise, if redirect information is found, the device iterates
       through the list of specified bootstrap servers, checking to see
       if the bootstrap server has bootstrapping data for the device.
       If the bootstrap server returns more redirect information, then
       the device processes it recursively.  Otherwise, if the bootstrap
       server returns onboarding information, the device processes it
       following the description provided in (3) above.

   5.  After having tried all supported sources of bootstrapping data,
       the device may retry again all the sources and/or provide
       manageability interfaces for manual configuration (e.g., CLI,
       HTTP, NETCONF, etc.).  If manual configuration is allowed, and
       such configuration is provided, the configuration should also
       disable the SZTP bootstrapping service, as the need for
       bootstrapping would no longer be present.




Watsen, et al.            Expires July 19, 2019                [Page 86]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


Appendix D.  Change Log

D.1.  ID to 00

   o  Major structural update; the essence is the same.  Most every
      section was rewritten to some degree.

   o  Added a Use Cases section

   o  Added diagrams for "Actors and Roles" and "NMS Precondition"
      sections, and greatly improved the "Device Boot Sequence" diagram

   o  Removed support for physical presence or any ability for
      configlets to not be signed.

   o  Defined the Conveyed Information DHCP option

   o  Added an ability for devices to also download images from
      configuration servers

   o  Added an ability for configlets to be encrypted

   o  Now configuration servers only have to support HTTP/S - no other
      schemes possible

D.2.  00 to 01

   o  Added boot-image and validate-owner annotations to the "Actors and
      Roles" diagram.

   o  Fixed 2nd paragraph in section 7.1 to reflect current use of
      anyxml.

   o  Added encrypted and signed-encrypted examples

   o  Replaced YANG module with XSD schema

   o  Added IANA request for the Conveyed Information DHCP Option

   o  Added IANA request for media types for boot-image and
      configuration

D.3.  01 to 02

   o  Replaced the need for a configuration signer with the ability for
      each NMS to be able to sign its own configurations, using
      manufacturer signed ownership vouchers and owner certificates.




Watsen, et al.            Expires July 19, 2019                [Page 87]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  Renamed configuration server to bootstrap server, a more
      representative name given the information devices download from
      it.

   o  Replaced the concept of a configlet by defining a southbound
      interface for the bootstrap server using YANG.

   o  Removed the IANA request for the boot-image and configuration
      media types

D.4.  02 to 03

   o  Minor update, mostly just to add an Editor's Note to show how this
      draft might integrate with the draft-pritikin-anima-bootstrapping-
      keyinfra.

D.5.  03 to 04

   o  Major update formally introducing unsigned data and support for
      Internet-based redirect servers.

   o  Added many terms to Terminology section.

   o  Added all new "Guiding Principles" section.

   o  Added all new "Sources for Bootstrapping Data" section.

   o  Rewrote the "Interactions" section and renamed it "Workflow
      Overview".

D.6.  04 to 05

   o  Semi-major update, refactoring the document into more logical
      parts

   o  Created new section for information types

   o  Added support for DNS servers

   o  Now allows provisional TLS connections

   o  Bootstrapping data now supports scripts

   o  Device Details section overhauled

   o  Security Considerations expanded

   o  Filled in enumerations for notification types



Watsen, et al.            Expires July 19, 2019                [Page 88]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


D.7.  05 to 06

   o  Minor update

   o  Added many Normative and Informative references.

   o  Added new section Other Considerations.

D.8.  06 to 07

   o  Minor update

   o  Added an Editorial Note section for RFC Editor.

   o  Updated the IANA Considerations section.

D.9.  07 to 08

   o  Minor update

   o  Updated to reflect review from Michael Richardson.

D.10.  08 to 09

   o  Added in missing "Signature" artifact example.

   o  Added recommendation for manufacturers to use interoperable
      formats and file naming conventions for removable storage devices.

   o  Added configuration-handling leaf to guide if config should be
      merged, replaced, or processed like an edit-config/yang-patch
      document.

   o  Added a pre-configuration script, in addition to the post-
      configuration script from -05 (issue #15).

D.11.  09 to 10

   o  Factored ownership voucher and voucher revocation to a separate
      document: draft-kwatsen-netconf-voucher. (issue #11)

   o  Removed <configuration-handling> options "edit-config" and "yang-
      patch". (issue #12)

   o  Defined how a signature over signed-data returned from a bootstrap
      server is processed. (issue #13)





Watsen, et al.            Expires July 19, 2019                [Page 89]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  Added recommendation for removable storage devices to use open/
      standard file systems when possible.  (issue #14)

   o  Replaced notifications "script-[warning/error]" with "[pre/post]-
      script-[warning/error]". (goes with issue #15)

   o  switched owner-certificate to be encoded using the PKCS #7 format.
      (issue #16)

   o  Replaced md5/sha1 with sha256 inside a choice statement, for
      future extensibility. (issue #17)

   o  A ton of editorial changes, as I went thru the entire draft with a
      fine-toothed comb.

D.12.  10 to 11

   o  fixed yang validation issues found by IETFYANGPageCompilation.
      note: these issues were NOT found by pyang --ietf or by the
      submission-time validator...

   o  fixed a typo in the yang module, someone the config false
      statement was removed.

D.13.  11 to 12

   o  fixed typo that prevented Appendix B from loading the examples
      correctly.

   o  fixed more yang validation issues found by
      IETFYANGPageCompilation.  note: again, these issues were NOT found
      by pyang --ietf or by the submission-time validator...

   o  updated a few of the notification enumerations to be more
      consistent with the other enumerations (following the warning/
      error pattern).

   o  updated the information-type artifact to state how it is encoded,
      matching the language that was in Appendix B.

D.14.  12 to 13

   o  defined a standalone artifact to encode the old information-type
      into a PKCS #7 structure.

   o  standalone information artifact hardcodes JSON encoding (to match
      the voucher draft).




Watsen, et al.            Expires July 19, 2019                [Page 90]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  combined the information and signature PKCS #7 structures into a
      single PKCS #7 structure.

   o  moved the certificate-revocations into the owner-certificate's
      PKCS #7 structure.

   o  eliminated support for voucher-revocations, to reflect the
      voucher-draft's switch from revocations to renewals.

D.15.  13 to 14

   o  Renamed "bootstrap information" to "onboarding information".

   o  Rewrote DHCP sections to address the packet-size limitation issue,
      as discussed in Chicago.

   o  Added Ian as an author for his text-contributions to the DHCP
      sections.

   o  Removed the Guiding Principles section.

D.16.  14 to 15

   o  Renamed action "notification" to "update-progress" and, likewise
      "notification-type" to "update-type".

   o  Updated examples to use "base64encodedvalue==" for binary values.

   o  Greatly simplified the "Artifact Groupings" section, and moved it
      as a subsection to the "Artifacts" section.

   o  Moved the "Workflow Overview" section to the Appendix.

   o  Renamed "bootstrap information" to "update information".

   o  Removed "Other Considerations" section.

   o  Tons of editorial updates.

D.17.  15 to 16

   o  tweaked language to refer to "initial state" rather than "factory
      default configuration", so as accommodate white-box scenarios.

   o  added a paragraph to Intro regarding how the solution primarily
      regards physical machines, but could be extended to VMs by a
      future document.




Watsen, et al.            Expires July 19, 2019                [Page 91]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  added a pointer to the Workflow Overview section (recently moved
      to the Appendix) to the Intro.

   o  added a note that, in order to simplify the verification process,
      the "Conveyed Information" PKCS #7 structure MUST also contain the
      signing X.509 certificate.

   o  noted that the owner certificate's must either have no Key Usage
      or the Key Usage must set the "digitalSignature" bit.

   o  noted that the owner certificate's subject and subjectAltName
      values are not constrained.

   o  moved/consolidated some text from the Artifacts section down to
      the Device Details section.

   o  tightened up some ambiguous language, for instance, by referring
      to specific leaf names in the Voucher artifact.

   o  reverted a previously overzealous s/unique-id/serial-number/
      change.

   o  modified language for when ZTP runs from when factory-default
      config is running to when ZTP is configured, which the factory-
      defaults should set .

D.18.  16 to 17

   o  Added an example for how to promote an untrusted connection to a
      trusted connection.

   o  Added a "query parameters" section defining some parameters
      enabling scenarios raised in last call.

   o  Added a "Disclosing Information to Untrusted Servers" section to
      the Security Considerations.

D.19.  17 to 18

   o  Added Security Considerations for each YANG module.

   o  Reverted back to the device always sending its DevID cert.

   o  Moved data tree to "get-bootstrapping-data" RPC.

   o  Moved the "update-progress" action to a "report-progress" RPC.





Watsen, et al.            Expires July 19, 2019                [Page 92]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  Added an "signed-data-preferred" parameter to "get-bootstrapping-
      data" RPC.

   o  Added the "ietf-zerotouch-device" module.

   o  Lots of small updates.

D.20.  18 to 19

   o  Fixed "must" expressions, by converting "choice" to a "list" of
      "image-verification", each of which now points to a base identity
      called "hash-algorithm".  There's just one algorithm currently
      defined (sha-256).  Wish there was a standard crypto module that
      could identify such identities.

D.21.  19 to 20

   o  Now references I-D.ietf-netmod-yang-tree-diagrams.

   o  Fixed tree-diagrams in Section 2 to always reflect current YANG
      (now they are now dynamically generated).

   o  The "redirect-information" container's "trust-anchor" is now a CMS
      structure that can contain a chain of certificates, rather than a
      single certificate.

   o  The "onboarding-information" container's support for image
      verification reworked to be extensible.

   o  Added a reference to the "Device Details" section to the new
      example-device-data-model module.

   o  Clarified that the device must always pass its IDevID certificate,
      even for untrusted bootstrap servers.

   o  Fixed the description statement for the "script" typedef to refer
      to the [pre/post]-script-[warning/error] enums, rather than the
      legacy script-[warning/error] enums.

   o  For the get-bootstrapping-data RPC's input, removed the "remote-
      id" and "circuit-id" fields, and added a "hw-model" field.

   o  Improved DHCP error handling text.

   o  Added MUST requirement for DHCPv6 client and server implementing
      [RFC3396] to handle URI lists longer than 255 octets.





Watsen, et al.            Expires July 19, 2019                [Page 93]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  Changed the "configuration" value in onboarding-information to be
      type "binary" instead of "anydata".

   o  Moved everything from PKCS#7 to CMS (this shows up as a big
      change).

   o  Added the early code point allocation assignments for the DHCP
      Options in the IANA Considerations section, and updated the RFC
      Editor note accordingly.

   o  Added RFC Editor request to replace the assigned values for the
      CMS content types.

   o  Relaxed auth requirements from device needing to always send
      IDevID cert to device needing to always send authentication
      credentials, as this better matches what RFC 8040 Section 2.5
      says.

   o  Moved normative module "ietf-zerotouch-device" to non-normative
      module "example-device-data-model".

   o  Updated Title, Abstract, and Introduction per discussion on list.

D.22.  20 to 21

   o  Now any of the three artifact can be encrypted.

   o  Fixed some line-too-long issues.

D.23.  21 to 22

   o  Removed specifics around how scripts indicate warnings or errors
      and how scripts emit output.

   o  Moved the SZTP Device Data Model section to the Appendix.

   o  Modified the YANG module in the SZTP Device Data Model section to
      reflect the latest trust-anchors and keystore drafts.

   o  Modified types in other YANG modules to more closely emulate what
      is in draft-ietf-netconf-crypto-types.

D.24.  22 to 23

   o  Rewrote section 5.6 (processing onboboarding information) to be
      clearer about error handling and retained state.  Specifically:





Watsen, et al.            Expires July 19, 2019                [Page 94]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


      *  Clarified that a script, upon having an error, must gracefully
         exit, cleaning up any state that might hinder subsequent
         executions.

      *  Added ability for scripts to be executed again with a flag
         enabling them to clean up state from a previous execution.

      *  Clarified that the conifguration commit is atomic.

      *  Clarified that any error encountered after committing the
         configuration (e.g., in the "post-configuration-script") must
         rollback the configuration to the previous configuration.

      *  Clarified that failure to successfully deliver the "bootstrap-
         initiated" and "bootstrap-complete" progress types must be
         treated as an error.

      *  Clarified that "return to bootstrapping sequence" is to be
         interpreted in the recursive context.  Meaning that the device
         rolls-back one loop, rather than start over from scratch.

   o  Changed how a device verifies a boot-image from just "MUST match
      one of the supplied fingerprints" to also allow for the
      verification to use an cryptographic signature embedded into the
      image itself.

   o  Added more "progress-type" enums for visibility reasons, enabling
      more strongly-typed debug information to be sent to the bootstrap
      server.

   o  Added Security Considerations based on early SecDir review.

   o  Added recommendation for device to send warning if the initial
      config does not disable the bootstrapping process.

D.25.  23 to 24

   o  Follow-ups from SecDir and Shepherd.

   o  Added "boot-image-complete" enumeration.

D.26.  24 to 25

   o  Removed remaining old "bootstrapping information" term usage.

   o  Fixed DHCP Option length definition.

   o  Added reference to RFC 6187.



Watsen, et al.            Expires July 19, 2019                [Page 95]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


D.27.  25 to 26

   o  Updated URI structure text (sec 8.3) and added norm. ref to
      RFC7230 reflecting Alexey Melnikov's comment.

   o  Added IANA registration for the 'zerotouch' service, per IESG
      review from Adam Roach.

   o  Clarified device's looping behavior and support for alternative
      provisioning mechanisms, per IESG review from Mirja Kuehlewind.

   o  Updated "ietf-sztp-bootstrap-server:ssh-host-key" from leaf-list
      to list, per IESG review from Benjamin Kaduk.

   o  Added option size text to DHCPv4 option size to address Suresh
      Krishnan's IESG review discuss point.

   o  Updated RFC3315 to RFC8415 and associated section references.

   o  Revamped the DNS Server section, after digging into Alexey
      Melnikov comment.

   o  Fixed IETF terminology template section in both YANG modules.

D.28.  26 to 27

   o  Added Security Consideration for cascading trust via redirects.

   o  Modified the get-bootstrapping-data RPC's "nonce" input parameter
      to being a minimum of 16-bytes (used to be 8-bytes).

   o  Added Security Consideration regarding possible reuse of device's
      private key.

   o  Added Security Consideration regarding use of sign-then-encrypt.

   o  Renamed "Zero Touch"/"zerotouch" throughout.  Now uses "SZTP" when
      referring to the draft/solution, and "conveyed" when referring to
      the bootstrapping artifact.

   o  Added missing text for "encrypted unsigned conveyed information"
      case.

   o  Renamed "untrusted-connection" input paramter to "signed-data-
      preferred"

   o  Switch yd:yang-data back to rc:yang-data




Watsen, et al.            Expires July 19, 2019                [Page 96]


Internet-Draft    Secure Zero Touch Provisioning (SZTP)     January 2019


   o  Added a couple features to the bootstrap-server module.

D.29.  27 to 28

   o  Modified DNS section to no longer reference DNS-SD (now just plain
      TXT and SRV lookups, via multicast or unicast.

   o  Registers "_sztp" in the DNS Underscore Global Scoped Entry
      Registry.

   o  Updated 802.1AR reference to current spec version.

Acknowledgements

   The authors would like to thank for following for lively discussions
   on list and in the halls (ordered by last name): Michael Behringer,
   Dean Bogdanovic, Martin Bjorklund, Joe Clarke, Dave Crocker, Toerless
   Eckert, Stephen Farrell, Stephen Hanna, Wes Hardaker, David
   Harrington, Mirja Kuehlewind, Radek Krejci, Suresh Krishnan, Benjamin
   Kaduk, David Mandelberg, Alexey Melnikov, Russ Mundy, Reinaldo Penno,
   Randy Presuhn, Max Pritikin, Michael Richardson, Adam Roach, Phil
   Shafer, Juergen Schoenwaelder.

   Special thanks goes to Steve Hanna, Russ Mundy, and Wes Hardaker for
   brainstorming the original solution during the IETF 87 meeting in
   Berlin.

Authors' Addresses

   Kent Watsen
   Juniper Networks

   EMail: kwatsen@juniper.net


   Mikael Abrahamsson
   T-Systems

   EMail: mikael.abrahamsson@t-systems.se


   Ian Farrer
   Deutsche Telekom AG

   EMail: ian.farrer@telekom.de






Watsen, et al.            Expires July 19, 2019                [Page 97]