NFSv4 Working Group David L. Black
Internet Draft Stephen Fridella
Expires: February 28, 2007 EMC Corporation
August 30, 2006
pNFS Block/Volume Layout
draft-ietf-nfsv4-pnfs-block-01.txt
Status of this Memo
By submitting this Internet-Draft, each author represents that
any applicable patent or other IPR claims of which he or she is
aware have been or will be disclosed, and any of which he or she
becomes aware will be disclosed, in accordance with Section 6 of
BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html
This Internet-Draft will expire in February 2007.
Abstract
Parallel NFS (pNFS) extends NFSv4 to allow clients to directly access
file data on the storage used by the NFSv4 server. This ability to
bypass the server for data access can increase both performance and
parallelism, but requires additional client functionality for data
access, some of which is dependent on the class of storage used. The
main pNFS operations draft specifies storage-class-independent
extensions to NFS; this draft specifies the additional extensions
(primarily data structures) for use of pNFS with block and volume
based storage.
Black Expires February 2007 [Page 1]
Internet-Draft pNFS Block/Volume Layout August 2006
Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC-2119 [RFC2119].
Table of Contents
1. Introduction...................................................3
2. Block Layout Description.......................................3
2.1. Background and Architecture...............................3
2.2. Data Structures: Extents and Extent Lists.................4
2.2.1. Layout Requests and Extent Lists.....................6
2.2.2. Layout Commits.......................................7
2.2.3. Layout Returns.......................................8
2.2.4. Client Copy-on-Write Processing......................9
2.2.5. Extents are Permissions.............................10
2.2.6. End-of-file Processing..............................11
2.3. Volume Identification....................................12
2.4. Crash Recovery Issues....................................14
3. Security Considerations.......................................14
4. Conclusions...................................................16
5. IANA Considerations...........................................16
6. Revision History..............................................16
7. Acknowledgments...............................................17
8. References....................................................17
8.1. Normative References.....................................17
8.2. Informative References...................................18
Author's Addresses...............................................18
Intellectual Property Statement..................................18
Disclaimer of Validity...........................................19
Copyright Statement..............................................19
Acknowledgment...................................................19
Black Expires February 2007 [Page 2]
Internet-Draft pNFS Block/Volume Layout August 2006
1. Introduction
Figure 1 shows the overall architecture of a pNFS system:
+-----------+
|+-----------+ +-----------+
||+-----------+ | |
||| | NFSv4 + pNFS | |
+|| Clients |<------------------------------>| Server |
+| | | |
+-----------+ | |
||| +-----------+
||| |
||| |
||| +-----------+ |
||| |+-----------+ |
||+----------------||+-----------+ |
|+-----------------||| | |
+------------------+|| Storage |------------+
+| Systems |
+-----------+
Figure 1 pNFS Architecture
The overall approach is that pNFS-enhanced clients obtain sufficient
information from the server to enable them to access the underlying
storage (on the Storage Systems) directly. See the pNFS portion of
[NFSV4.1] for more details. This draft is concerned with access from
pNFS clients to Storage Systems over storage protocols based on
blocks and volumes, such as the SCSI protocol family (e.g., parallel
SCSI, FCP for Fibre Channel, iSCSI, SAS). This class of storage is
referred to as block/volume storage. While the Server to Storage
System protocol is not of concern for interoperability here, it will
typically also be a block/volume protocol when clients use block/
volume protocols.
2. Block Layout Description
2.1. Background and Architecture
The fundamental storage abstraction supported by block/volume storage
is a storage volume consisting of a sequential series of fixed size
blocks. This can be thought of as a logical disk; it may be realized
by the Storage System as a physical disk, a portion of a physical
disk or something more complex (e.g., concatenation, striping, RAID,
Black Expires February 2007 [Page 3]
Internet-Draft pNFS Block/Volume Layout August 2006
and combinations thereof) involving multiple physical disks or
portions thereof.
A pNFS layout for this block/volume class of storage is responsible
for mapping from an NFS file (or portion of a file) to the blocks of
storage volumes that contain the file. The blocks are expressed as
extents with 64 bit offsets and lengths using the existing NFSv4
offset4 and length4 types. Clients must be able to perform I/O to
the block extents without affecting additional areas of storage
(especially important for writes), therefore extents MUST be aligned
to 512-byte boundaries, and SHOULD be aligned to the block size used
by the NFSv4 server in managing the actual filesystem (4 kilobytes
and 8 kilobytes are common block sizes). This block size is
available as an NFSv4 attribute - see Section 11.4 of [NFSV4.1].
The pNFS operation for requesting a layout (LAYOUTGET) includes the
"pnfs_layoutiomode4 iomode" argument which indicates whether the
requested layout is for read-only use or read-write use. A read-only
layout may contain holes that are read as zero, whereas a read-write
layout will contain allocated, but uninitialized storage in those
holes (read as zero, can be written by client). This draft also
supports client participation in copy on write by providing both
read-only and uninitialized storage for the same range in a layout.
Reads are initially performed on the read-only storage, with writes
going to the uninitialized storage. After the first write that
initializes the uninitialized storage, all reads are performed to
that now-initialized writeable storage, and the corresponding read-
only storage is no longer used.
2.2. Data Structures: Extents and Extent Lists
A pNFS block layout is a list of extents within a flat array of 512-
byte data blocks known as a volume. A volume may correspond to a
single logical unit in a SAN, or a more complex aggregation of
multiple logical units. The details of the volume topology can be
determined by using the GETDEVICEINFO or GETDEVICELIST operation (see
discussion of volume identification, section 2.3 below). The block
layout describes the individual block extents on the volume that make
up the file. Each individual extent MUST be at least 512-byte
aligned.
Black Expires February 2007 [Page 4]
Internet-Draft pNFS Block/Volume Layout August 2006
enum extentState4 {
READ_WRITE_DATA = 0, /* the data located by this extent is valid
for reading and writing. */
READ_DATA = 1, /* the data located by this extent is valid
for reading only; it may not be written.
*/
INVALID_DATA = 2, /* the location is valid; the data is
invalid. It is a newly (pre-) allocated
extent. There is physical space on the
volume. */
NONE_DATA = 3, /* the location is invalid. It is a hole in
the file. There is no physical space on
the volume. */
};
struct pnfs_block_extent {
offset4 offset; /* the starting offset in the
file */
length4 length; /* the size of the extent */
offset4 storage_offset; /* the starting offset in the
volume */
extentState4 es; /* the state of this extent */
};
struct pnfs_block_layout {
pnfs_deviceid4 volume; /* logical volume on which file
is stored. */
pnfs_block_extent extents<>; /* extents which make up this
layout. */
};
Black Expires February 2007 [Page 5]
Internet-Draft pNFS Block/Volume Layout August 2006
The block layout consists of an identifier of the logical volume on
which the file is stored, followed by a list of extents which map the
logical regions of the file to physical locations on the volume. The
"storage_offset" field within each extent identifies a location on
the logical volume described by the "volume" field in the layout.
The client is responsible for translating this logical offset into an
offset on the appropriate underlying SAN logical unit.
Each extent maps a logical region of the file onto a portion of the
specified logical volume. The file_offset, extent_length, and es
fields for an extent returned from the server are always valid. The
interpretation of the storage_offset field depends on the value of es
as follows:
o READ_WRITE_DATA means that storage_offset is valid, and points to
valid/initialized data that can be read and written.
o READ_DATA means that storage_offset is valid and points to valid/
initialized data which can only be read. Write operations are
prohibited; the client may need to request a read-write layout.
o INVALID_DATA means that storage_offset is valid, but points to
invalid uninitialized data. This data must not be physically read
from the disk until it has been initialized. A read request for
an INVALID_DATA extent must fill the user buffer with zeros. Write
requests must write whole server-sized blocks to the disk with
bytes not initialized by the user must be set to zero. Any write
to storage in an INVALID_DATA extent changes the written portion
of the extent to READ_WRITE_DATA; the pNFS client is responsible
for reporting this change via LAYOUTCOMMIT.
o NONE_DATA means that storage_offset is not valid, and this extent
may not be used to satisfy write requests. Read requests may be
satisfied by zero-filling as for INVALID_DATA. NONE_DATA extents
are returned by requests for readable extents; they are never
returned if the request was for a writeable extent.
The extent list lists all relevant extents in increasing order of the
file_offset of each extent; any ties are broken by increasing order
of the extent state (es).
2.2.1. Layout Requests and Extent Lists
Each request for a layout specifies at least three parameters:
offset, desired size, and minimum size. If the status of a request
indicates success, the extent list returned must meet the following
criteria:
Black Expires February 2007 [Page 6]
Internet-Draft pNFS Block/Volume Layout August 2006
o A request for a readable (but not writeable) layout returns only
READ_DATA or NONE_DATA extents (but not INVALID_DATA or
READ_WRITE_DATA extents).
o A request for a writeable layout returns READ_WRITE_DATA or
INVALID_DATA extents (but not NONE_DATA extents). It may also
return READ_DATA extents only when the offset ranges in those
extents are also covered by INVALID_DATA extents to permit writes.
o The first extent in the list MUST contain the starting offset.
o The total size of extents in the extent list MUST cover at least
the minimum size and no more than the desired size. One exception
is allowed: the total size MAY be smaller if only readable extents
were requested and EOF is encountered.
o Extents in the extent list MUST be logically contiguous for a
read-only layout. For a read-write layout, the set of writable
extents (i.e., excluding READ_DATA extents) MUST be logically
contiguous. Every READ_DATA extent in a read-write layout MUST be
covered by an INVALID_DATA extent. This overlap of READ_DATA and
INVALID_DATA extents is the only permitted extent overlap.
o Extents MUST be ordered in the list by starting offset, with
READ_DATA extents preceding INVALID_DATA extents in the case of
equal file_offsets.
2.2.2. Layout Commits
struct pnfs_block_layoutupdate {
pnfs_block_extent commit_list<>; /* list of extents to which now
contain valid data. */
bool make_version; /* client requests server to
create copy-on-write image of
this file. */
}
The "pnfs_block_layoutupdate" structure is used by the client as the
block-protocol specific argument in a LAYOUTCOMMIT operation. The
"commit_list" field is an extent list covering regions of the file
layout that were previously in the INVALID_DATA state, but have been
written by the client and should now be considered in the
READ_WRITE_DATA state. It should be noted that the server may be
unable to commit regions at a granularity smaller than a file-system
Black Expires February 2007 [Page 7]
Internet-Draft pNFS Block/Volume Layout August 2006
block (typically 4KB or 8KB). As noted above, the block-size that
the server uses is available as an NFSv4 attribute, and any extents
included in the "commit_list" must be aligned on this granularity.
If the client believes that its actions have moved the end-of-file
into the middle of a block being committed, the client MUST write
zeroes from the end-of-file to the end of that block before
committing the block. Failure to do so may result in junk
(uninitialized data) appearing in that area if the file is
subsequently extended by moving the end-of-file.
The "make_version" field of the structure is a flag that the client
may set to request that the server create a copy-on-write image of
the file (pNFS clients may be involved in this operation - see
section 2.2.4, below). In anticipation of this operation the client
which sets the "make_version" flag in the LAYOUTCOMMIT operation
should immediately mark all extents in the layout that is possesses
as state READ_DATA. Future writes to the file require a new
LAYOUTGET operation to the server with an "iomode" set to
LAYOUTIOMODE_RW.
2.2.3. Layout Returns
struct pnfs_block_layoutreturn {
pnfs_block_extent rel_list<>; /* list of extents the client
will no longer use. */
}
The "rel_list" field is an extent list covering regions of the file
layout that are no longer needed by the client. Including extents in
the "rel_list" for a LAYOUTRETURN operation represents an explicit
release of resources by the client, usually done for the purpose of
avoiding unnecessary CB_LAYOUTRECALL operations in the future.
Note that the block/volume layout supports unilateral layout
revocation. When a layout is unilaterally revoked by the server,
usually due to the client's lease timer expiring or the client
failing to return a layout in a timely manner, it is important for
the sake of correctness that any in-flight I/Os that the client
issued before the layout was revoked are rejected at the storage.
For the block/volume protocol, this is possible by fencing a client
with an expired layout timer from the physical storage. Note,
however, that the granularity of this operation can only be at the
host/logical-unit level. Thus, if one of a client's layouts is
unilaterally revoked by the server, it will effectively render
Black Expires February 2007 [Page 8]
Internet-Draft pNFS Block/Volume Layout August 2006
useless *all* of the client's layouts for files in the same
filesystem.
2.2.4. Client Copy-on-Write Processing
Distinguishing the READ_WRITE_DATA and READ_DATA extent types in
combination with the allowed overlap of READ_DATA extents with
INVALID_DATA extents allows copy-on-write processing to be done by
pNFS clients. In classic NFS, this operation would be done by the
server. Since pNFS enables clients to do direct block access, it is
useful for clients to participate in copy-on-write operations. All
block/volume pNFS clients MUST support this copy-on-write processing.
When a client wishes to write data covered by a READ_DATA extent, it
MUST have requested a writable layout from the server; that layout
will contain INVALID_DATA extents to cover all the data ranges of
that layout's READ_DATA extents. More precisely, for any file_offset
range covered by one or more READ_DATA extents in a writable layout,
the server MUST include one or more INVALID_DATA extents in the
layout that cover the same file_offset range. When performing a write
to such an area of a layout, the client MUST effectively copy the
data from the READ_DATA extent for any partial blocks of file_offset
and range, merge in the changes to be written, and write the result
to the INVALID_DATA extent for the blocks for that file_offset and
range. That is, if entire blocks of data are to be overwritten by an
operation, the corresponding READ_DATA blocks need not be fetched,
but any partial-block writes must be merged with data fetched via
READ_DATA extents before storing the result via INVALID_DATA extents.
For the purposes of this discussion, "entire blocks" and "partial
blocks" refer to the server's file-system block size. Storing of
data in an INVALID_DATA extent converts the written portion of the
INVALID_DATA extent to a READ_WRITE_DATA extent; all subsequent reads
MUST be performed from this extent; the corresponding portion of the
READ_DATA extent MUST NOT be used after storing data in an
INVALID_DATA extent.
In the LAYOUTCOMMIT operation that normally sends updated layout
information back to the server, for writable data, some INVALID_DATA
extents may be committed as READ_WRITE_DATA extents, signifying that
the storage at the corresponding storage_offset values has been
stored into and is now to be considered as valid data to be read.
READ_DATA extents are not committed to the server. For extents that
the client receives via LAYOUTGET as INVALID_DATA and returns via
LAYOUTCOMMIT as READ_WRITE_DATA, the server will understand that the
READ_DATA mapping for that extent is no longer valid or necessary for
that file.
Black Expires February 2007 [Page 9]
Internet-Draft pNFS Block/Volume Layout August 2006
2.2.5. Extents are Permissions
Layout extents returned to pNFS clients grant permission to read or
write; READ_DATA and NONE_DATA are read-only (NONE_DATA reads as
zeroes), READ_WRITE_DATA and INVALID_DATA are read/write,
(INVALID_DATA reads as zeros, any write converts it to
READ_WRITE_DATA). This is the only client means of obtaining
permission to perform direct I/O to storage devices; a pNFS client
MUST NOT perform direct I/O operations that are not permitted by an
extent held by the client. Client adherence to this rule places the
pNFS server in control of potentially conflicting storage device
operations, enabling the server to determine what does conflict and
how to avoid conflicts by granting and recalling extents to/from
clients.
Block/volume class storage devices are not required to perform read
and write operations atomically. Overlapping concurrent read and
write operations to the same data may cause the read to return a
mixture of before-write and after-write data. Overlapping write
operations can be worse, as the result could be a mixture of data
from the two write operations; this can be particularly nasty if the
underlying storage is striped and the operations complete in
different orders on different stripes. A pNFS server can avoid these
conflicts by implementing a single writer XOR multiple readers
concurrency control policy when there are multiple clients who wish
to access the same data. This policy SHOULD be implemented when
storage devices do not provide atomicity for concurrent read/write
and write/write operations to the same data.
A client that makes a layout request that conflicts with an existing
layout delegation will be rejected with the error
NFS4ERR_LAYOUTTRYLATER. This client is then expected to retry the
request after a short interval. During this interval the server
needs to recall the conflicting portion of the layout delegation from
the client that currently holds it. This reject-and-retry approach
does not prevent client starvation when there is contention for the
layout of a particular file. For this reason a pNFS server SHOULD
implement a mechanism to prevent starvation. One possibility is that
the server can maintain a queue of rejected layout requests. Each
new layout request can be checked to see if it conflicts with a
previous rejected request, and if so, the newer request can be
rejected. Once the original requesting client retries its request,
its entry in the rejected request queue can be cleared, or the entry
in the rejected request queue can be removed when it reaches a
certain age.
Black Expires February 2007 [Page 10]
Internet-Draft pNFS Block/Volume Layout August 2006
NFSv4 supports mandatory locks and share reservations. These are
mechanisms that clients can use to restrict the set of I/O operations
that are permissible to other clients. Since all I/O operations
ultimately arrive at the NFSv4 server for processing, the server is
in a position to enforce these restrictions. However, with pNFS
layout delegations, I/Os will be issued from the clients that hold
the delegations directly to the storage devices that host the data.
These devices have no knowledge of files, mandatory locks, or share
reservations, and are not in a position to enforce such restrictions.
For this reason the NFSv4 server MUST NOT grant layout delegations
that conflict with mandatory locks or share reservations. Further,
if a conflicting mandatory lock request or a conflicting open request
arrives at the server, the server MUST recall the part of the layout
delegation in conflict with the request before processing the
request.
2.2.6. End-of-file Processing
The end-of-file location can be changed in two ways: implicitly as
the result of a WRITE or LAYOUTCOMMIT beyond the current end-of-file,
or explicitly as the result of a SETATTR request. Typically, when a
file is truncated by an NFSv4 client via the SETATTR call, the server
frees any disk blocks belonging to the file which are beyond the new
end-of-file byte, and may write zeros to the portion of the new end-
of-file block beyond the new end-of-file byte. These actions render
any pNFS layouts which refer to the blocks that are freed or written
semantically invalid. Therefore, the server MUST recall from clients
the portions of any pNFS layouts which refer to blocks that will be
freed or written by the server before processing the truncate
request. These recalls may take time to complete; as explained in
[NFSv4.1], if the server cannot respond to the client SETATTR request
in a reasonable amount of time, it SHOULD reply to the client with
the error NFS4ERR_DELAY.
Blocks in the INVALID_DATA state which lie beyond the new end-of-file
block present a special case. The server has reserved these blocks
for use by a pNFS client with a writable layout for the file, but the
client has yet to commit the blocks, and they are not yet a part of
the file mapping on disk. The server MAY free these blocks while
processing the SETATTR request. If so, the server MUST recall any
layouts from pNFS clients which refer to the blocks before processing
the truncate. If the server does not free the INVALID_DATA blocks
while processing the SETATTR request, it need not recall layouts
which refer only to the INVALID DATA blocks.
Black Expires February 2007 [Page 11]
Internet-Draft pNFS Block/Volume Layout August 2006
When a file is extended implicitly by a WRITE or LAYOUTCOMMIT beyond
the current end-of-file, or extended explicitly by a SETATTR request,
the server need not recall any portions of any pNFS layouts.
2.3. Volume Identification
Storage Systems such as storage arrays can have multiple physical
network ports that need not be connected to a common network,
resulting in a pNFS client having simultaneous multipath access to
the same storage volumes via different ports on different networks.
The networks may not even be the same technology - for example,
access to the same volume via both iSCSI and Fibre Channel is
possible, hence network address are difficult to use for volume
identification. For this reason, this pNFS block layout identifies
storage volumes by content, for example providing the means to match
(unique portions of) labels used by volume managers. Any block pNFS
system using this layout MUST support a means of content-based unique
volume identification that can be employed via the data structure
given here.
struct sigComponent { /* disk signature component */
offset4 sig_offset; /* byte offset of component */
length4 sig_length; /* byte length of component */
opaque contents<>; /* contents of this component of the
signature (this is opaque) */
};
enum pnfs_block_volume_type {
VOLUME_SIMPLE = 0, /* volume maps to a single LU */
VOLUME_SLICE = 1, /* volume is a slice of another volume */
VOLUME_CONCAT = 2, /* volume is a concatenation of multiple
volumes */
VOLUME_STRIPE = 3, /* volume is striped across multiple
volumes */
};
Black Expires February 2007 [Page 12]
Internet-Draft pNFS Block/Volume Layout August 2006
struct pnfs_block_slice_volume_info {
offset4 start; /* block-offset of the start of the
slice */
length4 length; /* length of slice in blocks */
pnfs_deviceid4 volume; /* volume which is sliced */
};
struct pnfs_block_concat_volume_info {
pnfs_deviceid4 volumes<>; /* volumes which are concatenated */
};
struct pnfs_block_stripe_volume_info {
length4 stripe_unit; /* size of stripe */
pnfs_deviceid4 volumes<>; /* volumes which are striped
across*/
};
union pnfs_block_deviceaddr4 switch (pnfs_block_volume_type type) {
case VOLUME_SIMPLE:
sigComponent ds<MAX_SIG_COMP>; /* disk signature */
case VOLUME_SLICE:
pnfs_block_slice_volume_info slice_info;
case VOLUME_CONCAT:
pnfs_block_concat_volume_info concat_info;
case VOLUME_STRIPE:
Black Expires February 2007 [Page 13]
Internet-Draft pNFS Block/Volume Layout August 2006
pnfs_block_stripe_volume_info stripe_info;
default:
void;
};
The "pnfs_block_deviceaddr4" union is a recursive structure that
allows arbitrarily complex nested volume structures to be encoded.
The types of aggregations that are allowed are stripes,
concatenations, and slices. The base case is a volume which maps
simply to one logical unit in the SAN, identified by the
"sigComponent" structure. Each SAN logical unit is content-
identified by a disk signature made up of extents within blocks and
contents that must match. The "pnfs_block_deviceaddr4" union is
returned by the server as the storage-protocol-specific opaque field
in the "pnfs_deviceaddr4" structure, in response to the GETDEVICEINFO
or GETDEVICELIST operations. Note that the opaque "contents" field
in the "sigComponent" structure MUST NOT be interpreted as a zero-
terminated string, as it may contain embedded zero-valued octets. It
contains exactly sig_length octets. There are no restrictions on
alignment (e.g., neither sig_offset nor sig_length are required to be
multiples of 4).
2.4. Crash Recovery Issues
When the server crashes while the client holds a writable layout, and
the client has written data to blocks covered by the layout, and the
blocks are still in the INVALID_DATA state, the client has two
options for recovery. If the data that has been written to these
blocks is still cached by the client, the client can simply re-write
the data via NFSv4, once the server has come back online. However,
if the data is no longer in the client's cache, the client MUST NOT
attempt to source the data from the data servers. Instead, it should
attempt to commit the blocks in question to the server during the
server's recovery grace period, by sending a LAYOUTCOMMIT with the
"reclaim" flag set to true. This process is described in detail in
[NFSv4.1] section 21.42.4.
3. Security Considerations
Typically, SAN disk arrays and SAN protocols provide access control
mechanisms (access-logics, lun masking, etc.) which operate at the
granularity of individual hosts. The functionality provided by such
mechanisms makes it possible for the server to "fence" individual
client machines from certain physical disks---that is to say, to
Black Expires February 2007 [Page 14]
Internet-Draft pNFS Block/Volume Layout August 2006
prevent individual client machines from reading or writing to certain
physical disks. Finer-grained access control methods are not
generally available. For this reason, certain security
responsibilities are delegated to pNFS clients for block/volume
layouts. Block/volume storage systems generally control access at a
volume granularity, and hence pNFS clients have to be trusted to only
perform accesses allowed by the layout extents they currently hold
(e.g., and not access storage for files on which a layout extent is
not held). In general, the server will not be able to prevent a
client which holds a layout for a file from accessing parts of the
physical disk not covered by the layout. Similarly, the server will
not be able to prevent a client from accessing blocks covered by a
layout that it has already returned. This block-based level of
protection must be provided by the client software.
An alternative method of block/volume protocol use is for the storage
devices to export virtualized block addresses, which do reflect the
files to which blocks belong. These virtual block addresses are
exported to pNFS clients via layouts. This allows the storage device
to make appropriate access checks, while mapping virtual block
addresses to physical block addresses. In environments where the
security requirements are such that client-side protection from
access to storage outside of the layout is not sufficient pNFS
block/volume storage layouts for pNFS SHOULD NOT be used, unless the
storage device is able to implement the appropriate access checks,
via use of virtualized block addresses, or other means.
This also has implications for some NFSv4 functionality outside pNFS.
For instance, if a file is covered by a mandatory read-only lock, the
server can ensure that only readable layouts for the file are granted
to pNFS clients. However, it is up to each pNFS client to ensure
that the readable layout is used only to service read requests, and
not to allow writes to the existing parts of the file. Since
block/volume storage systems are generally not capable of enforcing
such file-based security, in environments where pNFS clients cannot
be trusted to enforce such policies, pNFS block/volume storage
layouts SHOULD NOT be used.
Access to block/volume storage is logically at a lower layer of the
I/O stack than NFSv4, and hence NFSv4 security is not directly
applicable to protocols that access such storage directly. Depending
on the protocol, some of the security mechanisms provided by NFSv4
(e.g., encryption, cryptographic integrity) may not be available, or
may be provided via different means. At one extreme, pNFS with
block/volume storage can be used with storage access protocols (e.g.,
parallel SCSI) that provide essentially no security functionality.
At the other extreme, pNFS may be used with storage protocols such as
Black Expires February 2007 [Page 15]
Internet-Draft pNFS Block/Volume Layout August 2006
iSCSI that provide significant functionality. It is the
responsibility of those administering and deploying pNFS with a
block/volume storage access protocol to ensure that appropriate
protection is provided to that protocol (physical security is a
common means for protocols not based on IP). In environments where
the security requirements for the storage protocol cannot be met,
pNFS block/volume storage layouts SHOULD NOT be used.
When security is available for a storage protocol, it is generally at
a different granularity and with a different notion of identity than
NFSv4 (e.g., NFSv4 controls user access to files, iSCSI controls
initiator access to volumes). The responsibility for enforcing
appropriate correspondences between these security layers is placed
upon the pNFS client. As with the issues in the first paragraph of
this section, in environments where the security requirements are
such that client-side protection from access to storage outside of
the layout is not sufficient, pNFS block/volume storage layouts
SHOULD NOT be used.
4. Conclusions
This draft specifies the block/volume layout type for pNFS and
associated functionality.
5. IANA Considerations
There are no IANA considerations in this document. All pNFS IANA
Considerations are covered in [NFSV4.1].
6. Revision History
-00: Initial Version as draft-black-pnfs-block-00
-01: Rework discussion of extents as locks to talk about extents
granting access permissions. Rewrite operation ordering section to
discuss deadlocks and races that can cause problems. Add new section
on recall completion. Add client copy-on-write based on text from
Craig Everhart.
-02: Fix glitches in extent state descriptions. Describe most issues
as RESOLVED. Most of Section 3 has been incorporated into the the
main PNFD draft, add NOTE to that effect and say that it will be
deleted in the next version of this draft (which should be a draft-
ietf-nfsv4 draft). Cleaning up a number of things have been left to
that draft revision, including the interlocks with the types in the
main pNFS draft, layout striping support, and finishing the Security
Considerations section.
Black Expires February 2007 [Page 16]
Internet-Draft pNFS Block/Volume Layout August 2006
-00: New version as draft-ietf-nfsv4-pnfs-block. Removed resolved
operations issues (Section 3). Align types with main pNFS draft
(which is now part of the NFSv4.1 minor version draft), add volume
striping and slicing support. New operations issues are in Section 3
- the need for a "reclaim bit" and EOF concerns are the two major
issues. Extended and improved the Security Considerations section,
but it still needs work. Added 1-sentence conclusion that also still
needs work.
-01: Changed definition of pnfs_block_deviceaddr4 union to allow more
concise representation of aggregated volume structures. Fixed typos
to make both pnfs_block_layoutupdate and pnfs_block_layoutreturn
structures contain extent lists instead of a single extent. Updated
section 2.1.6 to remove references to CB_SIZECHANGED. Moved
description of recovery from "Issues" section to "Block Layout
Description" section. Removed section 3.2 "End-of-file handling
issues". Merged old "block/volume layout security considerations"
section from previous version of [NFSv4.1] with section 4. Moved
paragraph on lingering writes to the section which describes layout
return. Removed Issues section (3) as the remaining issues are all
resolved.
7. Acknowledgments
This draft draws extensively on the authors' familiarity with the
mapping functionality and protocol in EMC's HighRoad system
[HighRoad]. The protocol used by HighRoad is called FMP (File
Mapping Protocol); it is an add-on protocol that runs in parallel
with filesystem protocols such as NFSv3 to provide pNFS-like
functionality for block/volume storage. While drawing on HighRoad
FMP, the data structures and functional considerations in this draft
differ in significant ways, based on lessons learned and the
opportunity to take advantage of NFSv4 features such as COMPOUND
operations. The design to support pNFS client participation in copy-
on-write is based on text and ideas contributed by Craig Everhart
(formerly with IBM).
8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[NFSV4.1] Shepler, S., Eisler, M., and Noveck, D. ed., "NFSv4 Minor
Version 1", draft-ietf-nfsv4-minorversion1-06.txt, Internet
Draft, August 2006.
Black Expires February 2007 [Page 17]
Internet-Draft pNFS Block/Volume Layout August 2006
8.2. Informative References
[HighRoad] EMC Corporation, "EMC Celerra HighRoad", EMC C819.1 white
paper, available at:
http://www.emc.com/pdf/products/celerra_file_server/HighRoad_wp.pdf
link checked 29 August 2006.
Author's Addresses
David L. Black
EMC Corporation
176 South Street
Hopkinton, MA 01748
Phone: +1 (508) 293-7953
Email: black_david@emc.com
Stephen Fridella
EMC Corporation
32 Coslin Drive
Southboro, MA 01772
Phone: +1 (508) 305-8512
Email: fridella_stephen@emc.com
Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
Black Expires February 2007 [Page 18]
Internet-Draft pNFS Block/Volume Layout August 2006
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
Acknowledgment
Funding for the RFC Editor function is currently provided by the
Internet Society.
Black Expires February 2007 [Page 19]
