NFS version 4 Working Group                                  S. Shepler
INTERNET-DRAFT                                   Sun Microsystems, Inc.
Document: draft-ietf-nfsv4-rfc3010bis-02.txt                   C. Beame
                                                       Hummingbird Ltd.
                                                           B. Callaghan
                                                 Sun Microsystems, Inc.
                                                              M. Eisler
                                                Network Appliance, Inc.
                                                              D. Noveck
                                                Network Appliance, Inc.
                                                            D. Robinson
                                                 Sun Microsystems, Inc.
                                                             R. Thurlow
                                                 Sun Microsystems, Inc.
                                                            August 2002



                         NFS version 4 Protocol



Status of this Memo

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC2026.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet- Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.


Abstract

   NFS version 4 is a distributed filesystem protocol which owes
   heritage to NFS protocol versions 2 [RFC1094] and 3 [RFC1813].



Expires: February 2003                                          [Page 1]


Draft Specification      NFS version 4 Protocol              August 2002


   Unlike earlier versions, the NFS version 4 protocol supports
   traditional file access while integrating support for file locking
   and the mount protocol.  In addition, support for strong security
   (and its negotiation), compound operations, client caching, and
   internationalization have been added.  Of course, attention has been
   applied to making NFS version 4 operate well in an Internet
   environment.


Copyright

   Copyright (C) The Internet Society (2000-2002).  All Rights Reserved.


Key Words

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].
































Expires: February 2003                                          [Page 2]


Draft Specification      NFS version 4 Protocol              August 2002


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . 7
   1.1.  Inconsistencies of this Document with Section 18 . . . . . 7
   1.2.  Overview of NFS version 4 Features . . . . . . . . . . . . 8
   1.2.1.  RPC and Security . . . . . . . . . . . . . . . . . . . . 8
   1.2.2.  Procedure and Operation Structure  . . . . . . . . . . . 8
   1.2.3.  Filesystem Model . . . . . . . . . . . . . . . . . . . . 9
   1.2.3.1.  Filehandle Types . . . . . . . . . . . . . . . . . . . 9
   1.2.3.2.  Attribute Types  . . . . . . . . . . . . . . . . . .  10
   1.2.3.3.  Filesystem Replication and Migration . . . . . . . .  10
   1.2.4.  OPEN and CLOSE . . . . . . . . . . . . . . . . . . . .  11
   1.2.5.  File locking . . . . . . . . . . . . . . . . . . . . .  11
   1.2.6.  Client Caching and Delegation  . . . . . . . . . . . .  11
   1.3.  General Definitions  . . . . . . . . . . . . . . . . . .  12
   2.  Protocol Data Types  . . . . . . . . . . . . . . . . . . .  14
   2.1.  Basic Data Types . . . . . . . . . . . . . . . . . . . .  14
   2.2.  Structured Data Types  . . . . . . . . . . . . . . . . .  15
   3.  RPC and Security Flavor  . . . . . . . . . . . . . . . . .  21
   3.1.  Ports and Transports . . . . . . . . . . . . . . . . . .  21
   3.1.1.  Client Retransmission Behavior . . . . . . . . . . . .  21
   3.2.  Security Flavors . . . . . . . . . . . . . . . . . . . .  22
   3.2.1.  Security mechanisms for NFS version 4  . . . . . . . .  22
   3.2.1.1.  Kerberos V5 as a security triple . . . . . . . . . .  22
   3.2.1.2.  LIPKEY as a security triple  . . . . . . . . . . . .  23
   3.2.1.3.  SPKM-3 as a security triple  . . . . . . . . . . . .  24
   3.3.  Security Negotiation . . . . . . . . . . . . . . . . . .  24
   3.3.1.  SECINFO  . . . . . . . . . . . . . . . . . . . . . . .  25
   3.3.2.  Security Error . . . . . . . . . . . . . . . . . . . .  25
   3.4.  Callback RPC Authentication  . . . . . . . . . . . . . .  25
   4.  Filehandles  . . . . . . . . . . . . . . . . . . . . . . .  28
   4.1.  Obtaining the First Filehandle . . . . . . . . . . . . .  28
   4.1.1.  Root Filehandle  . . . . . . . . . . . . . . . . . . .  28
   4.1.2.  Public Filehandle  . . . . . . . . . . . . . . . . . .  28
   4.2.  Filehandle Types . . . . . . . . . . . . . . . . . . . .  29
   4.2.1.  General Properties of a Filehandle . . . . . . . . . .  29
   4.2.2.  Persistent Filehandle  . . . . . . . . . . . . . . . .  30
   4.2.3.  Volatile Filehandle  . . . . . . . . . . . . . . . . .  30
   4.2.4.  One Method of Constructing a Volatile Filehandle . . .  31
   4.3.  Client Recovery from Filehandle Expiration . . . . . . .  32
   5.  File Attributes  . . . . . . . . . . . . . . . . . . . . .  34
   5.1.  Mandatory Attributes . . . . . . . . . . . . . . . . . .  35
   5.2.  Recommended Attributes . . . . . . . . . . . . . . . . .  35
   5.3.  Named Attributes . . . . . . . . . . . . . . . . . . . .  35
   5.4.  Classification of Attributes . . . . . . . . . . . . . .  36
   5.5.  Mandatory Attributes - Definitions . . . . . . . . . . .  38
   5.6.  Recommended Attributes - Definitions . . . . . . . . . .  40
   5.7.  Time Access  . . . . . . . . . . . . . . . . . . . . . .  45
   5.8.  Interpreting owner and owner_group . . . . . . . . . . .  45
   5.9.  Character Case Attributes  . . . . . . . . . . . . . . .  47
   5.10.  Quota Attributes  . . . . . . . . . . . . . . . . . . .  47
   5.11.  Access Control Lists  . . . . . . . . . . . . . . . . .  48


Expires: February 2003                                          [Page 3]


Draft Specification      NFS version 4 Protocol              August 2002


   5.11.1.  ACE type  . . . . . . . . . . . . . . . . . . . . . .  49
   5.11.2.  ACE Access Mask . . . . . . . . . . . . . . . . . . .  50
   5.11.3.  ACE flag  . . . . . . . . . . . . . . . . . . . . . .  52
   5.11.4.  ACE who . . . . . . . . . . . . . . . . . . . . . . .  53
   5.11.5.  Mode Attribute  . . . . . . . . . . . . . . . . . . .  54
   5.11.6.  Mode and ACL Attribute  . . . . . . . . . . . . . . .  55
   5.11.7.  mounted_on_fileid . . . . . . . . . . . . . . . . . .  55
   6.  Filesystem Migration and Replication . . . . . . . . . . .  57
   6.1.  Replication  . . . . . . . . . . . . . . . . . . . . . .  57
   6.2.  Migration  . . . . . . . . . . . . . . . . . . . . . . .  57
   6.3.  Interpretation of the fs_locations Attribute . . . . . .  58
   6.4.  Filehandle Recovery for Migration or Replication . . . .  59
   7.  NFS Server Name Space  . . . . . . . . . . . . . . . . . .  60
   7.1.  Server Exports . . . . . . . . . . . . . . . . . . . . .  60
   7.2.  Browsing Exports . . . . . . . . . . . . . . . . . . . .  60
   7.3.  Server Pseudo Filesystem . . . . . . . . . . . . . . . .  60
   7.4.  Multiple Roots . . . . . . . . . . . . . . . . . . . . .  61
   7.5.  Filehandle Volatility  . . . . . . . . . . . . . . . . .  61
   7.6.  Exported Root  . . . . . . . . . . . . . . . . . . . . .  61
   7.7.  Mount Point Crossing . . . . . . . . . . . . . . . . . .  62
   7.8.  Security Policy and Name Space Presentation  . . . . . .  62
   8.  File Locking and Share Reservations  . . . . . . . . . . .  64
   8.1.  Locking  . . . . . . . . . . . . . . . . . . . . . . . .  64
   8.1.1.  Client ID  . . . . . . . . . . . . . . . . . . . . . .  64
   8.1.2.  Server Release of Clientid . . . . . . . . . . . . . .  67
   8.1.3.  lock_owner and stateid Definition  . . . . . . . . . .  68
   8.1.4.  Use of the stateid and Locking . . . . . . . . . . . .  69
   8.1.5.  Sequencing of Lock Requests  . . . . . . . . . . . . .  71
   8.1.6.  Recovery from Replayed Requests  . . . . . . . . . . .  72
   8.1.7.  Releasing lock_owner State . . . . . . . . . . . . . .  72
   8.1.8.  Use of Open Confirmation . . . . . . . . . . . . . . .  73
   8.2.  Lock Ranges  . . . . . . . . . . . . . . . . . . . . . .  74
   8.3.  Upgrading and Downgrading Locks  . . . . . . . . . . . .  74
   8.4.  Blocking Locks . . . . . . . . . . . . . . . . . . . . .  75
   8.5.  Lease Renewal  . . . . . . . . . . . . . . . . . . . . .  75
   8.6.  Crash Recovery . . . . . . . . . . . . . . . . . . . . .  76
   8.6.1.  Client Failure and Recovery  . . . . . . . . . . . . .  76
   8.6.2.  Server Failure and Recovery  . . . . . . . . . . . . .  77
   8.6.3.  Network Partitions and Recovery  . . . . . . . . . . .  79
   8.7.  Recovery from a Lock Request Timeout or Abort  . . . . .  80
   8.8.  Server Revocation of Locks . . . . . . . . . . . . . . .  80
   8.9.  Share Reservations . . . . . . . . . . . . . . . . . . .  81
   8.10.  OPEN/CLOSE Operations . . . . . . . . . . . . . . . . .  82
   8.10.1.  Close and Retention of State Information  . . . . . .  83
   8.11.  Open Upgrade and Downgrade  . . . . . . . . . . . . . .  83
   8.12.  Short and Long Leases . . . . . . . . . . . . . . . . .  84
   8.13.  Clocks, Propagation Delay, and Calculating Lease
          Expiration  . . . . . . . . . . . . . . . . . . . . . .  84
   8.14.  Migration, Replication and State  . . . . . . . . . . .  85
   8.14.1.  Migration and State . . . . . . . . . . . . . . . . .  85
   8.14.2.  Replication and State . . . . . . . . . . . . . . . .  86
   8.14.3.  Notification of Migrated Lease  . . . . . . . . . . .  86


Expires: February 2003                                          [Page 4]


Draft Specification      NFS version 4 Protocol              August 2002


   8.14.4.  Migration and the Lease_time Attribute  . . . . . . .  87
   9.  Client-Side Caching  . . . . . . . . . . . . . . . . . . .  88
   9.1.  Performance Challenges for Client-Side Caching . . . . .  88
   9.2.  Delegation and Callbacks . . . . . . . . . . . . . . . .  89
   9.2.1.  Delegation Recovery  . . . . . . . . . . . . . . . . .  90
   9.3.  Data Caching . . . . . . . . . . . . . . . . . . . . . .  92
   9.3.1.  Data Caching and OPENs . . . . . . . . . . . . . . . .  92
   9.3.2.  Data Caching and File Locking  . . . . . . . . . . . .  93
   9.3.3.  Data Caching and Mandatory File Locking  . . . . . . .  95
   9.3.4.  Data Caching and File Identity . . . . . . . . . . . .  95
   9.4.  Open Delegation  . . . . . . . . . . . . . . . . . . . .  96
   9.4.1.  Open Delegation and Data Caching . . . . . . . . . . .  99
   9.4.2.  Open Delegation and File Locks . . . . . . . . . . . .  100
   9.4.3.  Handling of CB_GETATTR . . . . . . . . . . . . . . . .  100
   9.4.4.  Recall of Open Delegation  . . . . . . . . . . . . . .  102
   9.4.5.  Delegation Revocation  . . . . . . . . . . . . . . . .  104
   9.5.  Data Caching and Revocation  . . . . . . . . . . . . . .  104
   9.5.1.  Revocation Recovery for Write Open Delegation  . . . .  104
   9.6.  Attribute Caching  . . . . . . . . . . . . . . . . . . .  105
   9.7.  Name Caching . . . . . . . . . . . . . . . . . . . . . .  107
   9.8.  Directory Caching  . . . . . . . . . . . . . . . . . . .  108
   10.  Minor Versioning  . . . . . . . . . . . . . . . . . . . .  110
   11.  Internationalization  . . . . . . . . . . . . . . . . . .  113
   11.1.  Universal Versus Local Character Sets . . . . . . . . .  113
   11.2.  Overview of Universal Character Set Standards . . . . .  114
   11.3.  Difficulties with UCS-4, UCS-2, Unicode . . . . . . . .  115
   11.4.  UTF-8 and its solutions . . . . . . . . . . . . . . . .  115
   11.5.  Normalization . . . . . . . . . . . . . . . . . . . . .  116
   11.6.  UTF-8 Related Errors  . . . . . . . . . . . . . . . . .  116
   12.  Error Definitions . . . . . . . . . . . . . . . . . . . .  118
   13.  NFS version 4 Requests  . . . . . . . . . . . . . . . . .  124
   13.1.  Compound Procedure  . . . . . . . . . . . . . . . . . .  124
   13.2.  Evaluation of a Compound Request  . . . . . . . . . . .  125
   13.3.  Synchronous Modifying Operations  . . . . . . . . . . .  125
   13.4.  Operation Values  . . . . . . . . . . . . . . . . . . .  126
   14.  NFS version 4 Procedures  . . . . . . . . . . . . . . . .  127
   14.1.  Procedure 0: NULL - No Operation  . . . . . . . . . . .  127
   14.2.  Procedure 1: COMPOUND - Compound Operations . . . . . .  128
   14.2.1.  Operation 3: ACCESS - Check Access Rights . . . . . .  131
   14.2.2.  Operation 4: CLOSE - Close File . . . . . . . . . . .  134
   14.2.3.  Operation 5: COMMIT - Commit Cached Data  . . . . . .  136
   14.2.4.  Operation 6: CREATE - Create a Non-Regular File Object 139
   14.2.5.  Operation 7: DELEGPURGE - Purge Delegations Awaiting
            Recovery  . . . . . . . . . . . . . . . . . . . . . .  142
   14.2.6.  Operation 8: DELEGRETURN - Return Delegation  . . . .  143
   14.2.7.  Operation 9: GETATTR - Get Attributes . . . . . . . .  144
   14.2.8.  Operation 10: GETFH - Get Current Filehandle  . . . .  146
   14.2.9.  Operation 11: LINK - Create Link to a File  . . . . .  148
   14.2.10.  Operation 12: LOCK - Create Lock . . . . . . . . . .  150
   14.2.11.  Operation 13: LOCKT - Test For Lock  . . . . . . . .  154
   14.2.12.  Operation 14: LOCKU - Unlock File  . . . . . . . . .  156
   14.2.13.  Operation 15: LOOKUP - Lookup Filename . . . . . . .  158


Expires: February 2003                                          [Page 5]


Draft Specification      NFS version 4 Protocol              August 2002


   14.2.14.  Operation 16: LOOKUPP - Lookup Parent Directory  . .  161
   14.2.15.  Operation 17: NVERIFY - Verify Difference in
             Attributes . . . . . . . . . . . . . . . . . . . . .  162
   14.2.16.  Operation 18: OPEN - Open a Regular File . . . . . .  164
   14.2.17.  Operation 19: OPENATTR - Open Named Attribute
             Directory  . . . . . . . . . . . . . . . . . . . . .  174
   14.2.18.  Operation 20: OPEN_CONFIRM - Confirm Open  . . . . .  176
   14.2.19.  Operation 21: OPEN_DOWNGRADE - Reduce Open File Access179
   14.2.20.  Operation 22: PUTFH - Set Current Filehandle . . . .  181
   14.2.21.  Operation 23: PUTPUBFH - Set Public Filehandle . . .  182
   14.2.22.  Operation 24: PUTROOTFH - Set Root Filehandle  . . .  184
   14.2.23.  Operation 25: READ - Read from File  . . . . . . . .  185
   14.2.24.  Operation 26: READDIR - Read Directory . . . . . . .  188
   14.2.25.  Operation 27: READLINK - Read Symbolic Link  . . . .  192
   14.2.26.  Operation 28: REMOVE - Remove Filesystem Object  . .  194
   14.2.27.  Operation 29: RENAME - Rename Directory Entry  . . .  197
   14.2.28.  Operation 30: RENEW - Renew a Lease  . . . . . . . .  200
   14.2.29.  Operation 31: RESTOREFH - Restore Saved Filehandle .  201
   14.2.30.  Operation 32: SAVEFH - Save Current Filehandle . . .  203
   14.2.31.  Operation 33: SECINFO - Obtain Available Security  .  204
   14.2.32.  Operation 34: SETATTR - Set Attributes . . . . . . .  208
   14.2.33.  Operation 35: SETCLIENTID - Negotiate Clientid . . .  211
   14.2.34.  Operation 36: SETCLIENTID_CONFIRM - Confirm Clientid  215
   14.2.35.  Operation 37: VERIFY - Verify Same Attributes  . . .  219
   14.2.36.  Operation 38: WRITE - Write to File  . . . . . . . .  221
   14.2.37.  Operation 39: RELEASE_LOCKOWNER - Release Lockowner
             State  . . . . . . . . . . . . . . . . . . . . . . .  226
   14.2.38.  Operation 10044: ILLEGAL - Illegal operation . . . .  228
   15.  NFS version 4 Callback Procedures . . . . . . . . . . . .  229
   15.1.  Procedure 0: CB_NULL - No Operation . . . . . . . . . .  229
   15.2.  Procedure 1: CB_COMPOUND - Compound Operations  . . . .  230
   15.2.1.  Operation 3: CB_GETATTR - Get Attributes  . . . . . .  232
   15.2.2.  Operation 4: CB_RECALL - Recall an Open Delegation  .  234
   15.2.3.  Operation 10044: CB_ILLEGAL - Illegal Callback
            Operation . . . . . . . . . . . . . . . . . . . . . .  236
   16.  Security Considerations . . . . . . . . . . . . . . . . .  237
   17.  IANA Considerations . . . . . . . . . . . . . . . . . . .  238
   17.1.  Named Attribute Definition  . . . . . . . . . . . . . .  238
   17.2.  ONC RPC Network Identifiers (netids)  . . . . . . . . .  238
   18.  RPC definition file . . . . . . . . . . . . . . . . . . .  239
   19.  Bibliography  . . . . . . . . . . . . . . . . . . . . . .  271
   20.  Authors . . . . . . . . . . . . . . . . . . . . . . . . .  277
   20.1.  Editor's Address  . . . . . . . . . . . . . . . . . . .  277
   20.2.  Authors' Addresses  . . . . . . . . . . . . . . . . . .  277
   20.3.  Acknowledgements  . . . . . . . . . . . . . . . . . . .  278
   21.  Full Copyright Statement  . . . . . . . . . . . . . . . .  279








Expires: February 2003                                          [Page 6]


Draft Specification      NFS version 4 Protocol              August 2002


1.  Introduction

   The NFS version 4 protocol is a further revision of the NFS protocol
   defined already by versions 2 [RFC1094] and 3 [RFC1813].  It retains
   the essential characteristics of previous versions: design for easy
   recovery, independent of transport protocols, operating systems and
   filesystems, simplicity, and good performance.  The NFS version 4
   revision has the following goals:


   o    Improved access and good performance on the Internet.

        The protocol is designed to transit firewalls easily, perform
        well where latency is high and bandwidth is low, and scale to
        very large numbers of clients per server.


   o    Strong security with negotiation built into the protocol.

        The protocol builds on the work of the ONCRPC working group in
        supporting the RPCSEC_GSS protocol.  Additionally, the NFS
        version 4 protocol provides a mechanism to allow clients and
        servers the ability to negotiate security and require clients
        and servers to support a minimal set of security schemes.


   o    Good cross-platform interoperability.

        The protocol features a filesystem model that provides a useful,
        common set of features that does not unduly favor one filesystem
        or operating system over another.


   o    Designed for protocol extensions.

        The protocol is designed to accept standard extensions that do
        not compromise backward compatibility.


1.1.  Inconsistencies of this Document with Section 18

   Section 18, RPC Definition File, contains the definitions in XDR
   description language of the constructs used by the protocol.  Prior
   to Section 18, several of the constructs are reproduced for purposes
   of explanation.  The reader is warned of the possibility of errors in
   the reproduced constructs outside of Section 18.  For any part of the
   document that is inconsistent with Section 18, Section 18 is to be
   considered authoritative.






Expires: February 2003                                          [Page 7]


Draft Specification      NFS version 4 Protocol              August 2002


1.2.  Overview of NFS version 4 Features

   To provide a reasonable context for the reader, the major features of
   NFS version 4 protocol will be reviewed in brief.  This will be done
   to provide an appropriate context for both the reader who is familiar
   with the previous versions of the NFS protocol and the reader that is
   new to the NFS protocols.  For the reader new to the NFS protocols,
   there is still a fundamental knowledge that is expected.  The reader
   should be familiar with the XDR and RPC protocols as described in
   [RFC1831] and [RFC1832].  A basic knowledge of filesystems and
   distributed filesystems is expected as well.


1.2.1.  RPC and Security

   As with previous versions of NFS, the External Data Representation
   (XDR) and Remote Procedure Call (RPC) mechanisms used for the NFS
   version 4 protocol are those defined in [RFC1831] and [RFC1832].  To
   meet end to end security requirements, the RPCSEC_GSS framework
   [RFC2203] will be used to extend the basic RPC security.  With the
   use of RPCSEC_GSS, various mechanisms can be provided to offer
   authentication, integrity, and privacy to the NFS version 4 protocol.
   Kerberos V5 will be used as described in [RFC1964] to provide one
   security framework.  The LIPKEY GSS-API mechanism described in
   [RFC2847] will be used to provide for the use of user password and
   server public key by the NFS version 4 protocol.  With the use of
   RPCSEC_GSS, other mechanisms may also be specified and used for NFS
   version 4 security.

   To enable in-band security negotiation, the NFS version 4 protocol
   has added a new operation which provides the client a method of
   querying the server about its policies regarding which security
   mechanisms must be used for access to the server's filesystem
   resources.  With this, the client can securely match the security
   mechanism that meets the policies specified at both the client and
   server.


1.2.2.  Procedure and Operation Structure

   A significant departure from the previous versions of the NFS
   protocol is the introduction of the COMPOUND procedure.  For the NFS
   version 4 protocol, there are two RPC procedures, NULL and COMPOUND.
   The COMPOUND procedure is defined in terms of operations and these
   operations correspond more closely to the traditional NFS procedures.
   With the use of the COMPOUND procedure, the client is able to build
   simple or complex requests.  These COMPOUND requests allow for a
   reduction in the number of RPCs needed for logical filesystem
   operations.  For example, without previous contact with a server a
   client will be able to read data from a file in one request by
   combining LOOKUP, OPEN, and READ operations in a single COMPOUND RPC.
   With previous versions of the NFS protocol, this type of single


Expires: February 2003                                          [Page 8]


Draft Specification      NFS version 4 Protocol              August 2002


   request was not possible.

   The model used for COMPOUND is very simple.  There is no logical OR
   or ANDing of operations.  The operations combined within a COMPOUND
   request are evaluated in order by the server.  Once an operation
   returns a failing result, the evaluation ends and the results of all
   evaluated operations are returned to the client.

   The NFS version 4 protocol continues to have the client refer to a
   file or directory at the server by a "filehandle".  The COMPOUND
   procedure has a method of passing a filehandle from one operation to
   another within the sequence of operations.  There is a concept of a
   "current filehandle" and "saved filehandle".  Most operations use the
   "current filehandle" as the filesystem object to operate upon.  The
   "saved filehandle" is used as temporary filehandle storage within a
   COMPOUND procedure as well as an additional operand for certain
   operations.


1.2.3.  Filesystem Model

   The general filesystem model used for the NFS version 4 protocol is
   the same as previous versions.  The server filesystem is hierarchical
   with the regular files contained within being treated as opaque byte
   streams.  In a slight departure, file and directory names are encoded
   with UTF-8 to deal with the basics of internationalization.

   The NFS version 4 protocol does not require a separate protocol to
   provide for the initial mapping between path name and filehandle.
   Instead of using the older MOUNT protocol for this mapping, the
   server provides a ROOT filehandle that represents the logical root or
   top of the filesystem tree provided by the server.  The server
   provides multiple filesystems by glueing them together with pseudo
   filesystems.  These pseudo filesystems provide for potential gaps in
   the path names between real filesystems.


1.2.3.1.  Filehandle Types

   In previous versions of the NFS protocol, the filehandle provided by
   the server was guaranteed to be valid or persistent for the lifetime
   of the filesystem object to which it referred.  For some server
   implementations, this persistence requirement has been difficult to
   meet.  For the NFS version 4 protocol, this requirement has been
   relaxed by introducing another type of filehandle, volatile.  With
   persistent and volatile filehandle types, the server implementation
   can match the abilities of the filesystem at the server along with
   the operating environment.  The client will have knowledge of the
   type of filehandle being provided by the server and can be prepared
   to deal with the semantics of each.




Expires: February 2003                                          [Page 9]


Draft Specification      NFS version 4 Protocol              August 2002


1.2.3.2.  Attribute Types

   The NFS version 4 protocol introduces three classes of filesystem or
   file attributes.  Like the additional filehandle type, the
   classification of file attributes has been done to ease server
   implementations along with extending the overall functionality of the
   NFS protocol.  This attribute model is structured to be extensible
   such that new attributes can be introduced in minor revisions of the
   protocol without requiring significant rework.

   The three classifications are: mandatory, recommended and named
   attributes.  This is a significant departure from the previous
   attribute model used in the NFS protocol.  Previously, the attributes
   for the filesystem and file objects were a fixed set of mainly UNIX
   attributes.  If the server or client did not support a particular
   attribute, it would have to simulate the attribute the best it could.

   Mandatory attributes are the minimal set of file or filesystem
   attributes that must be provided by the server and must be properly
   represented by the server.  Recommended attributes represent
   different filesystem types and operating environments.  The
   recommended attributes will allow for better interoperability and the
   inclusion of more operating environments.  The mandatory and
   recommended attribute sets are traditional file or filesystem
   attributes.  The third type of attribute is the named attribute.  A
   named attribute is an opaque byte stream that is associated with a
   directory or file and referred to by a string name.  Named attributes
   are meant to be used by client applications as a method to associate
   application specific data with a regular file or directory.

   One significant addition to the recommended set of file attributes is
   the Access Control List (ACL) attribute.  This attribute provides for
   directory and file access control beyond the model used in previous
   versions of the NFS protocol.  The ACL definition allows for
   specification of user and group level access control.


1.2.3.3.  Filesystem Replication and Migration

   With the use of a special file attribute, the ability to migrate or
   replicate server filesystems is enabled within the protocol.  The
   filesystem locations attribute provides a method for the client to
   probe the server about the location of a filesystem.  In the event of
   a migration of a filesystem, the client will receive an error when
   operating on the filesystem and it can then query as to the new file
   system location.  Similar steps are used for replication, the client
   is able to query the server for the multiple available locations of a
   particular filesystem.  From this information, the client can use its
   own policies to access the appropriate filesystem location.





Expires: February 2003                                         [Page 10]


Draft Specification      NFS version 4 Protocol              August 2002


1.2.4.  OPEN and CLOSE

   The NFS version 4 protocol introduces OPEN and CLOSE operations.  The
   OPEN operation provides a single point where file lookup, creation,
   and share semantics can be combined.  The CLOSE operation also
   provides for the release of state accumulated by OPEN.


1.2.5.  File locking

   With the NFS version 4 protocol, the support for byte range file
   locking is part of the NFS protocol.  The file locking support is
   structured so that an RPC callback mechanism is not required.  This
   is a departure from the previous versions of the NFS file locking
   protocol, Network Lock Manager (NLM).  The state associated with file
   locks is maintained at the server under a lease-based model.  The
   server defines a single lease period for all state held by a NFS
   client.  If the client does not renew its lease within the defined
   period, all state associated with the client's lease may be released
   by the server.  The client may renew its lease with use of the RENEW
   operation or implicitly by use of other operations (primarily READ).


1.2.6.  Client Caching and Delegation

   The file, attribute, and directory caching for the NFS version 4
   protocol is similar to previous versions.  Attributes and directory
   information are cached for a duration determined by the client.  At
   the end of a predefined timeout, the client will query the server to
   see if the related filesystem object has been updated.

   For file data, the client checks its cache validity when the file is
   opened.  A query is sent to the server to determine if the file has
   been changed.  Based on this information, the client determines if
   the data cache for the file should kept or released.  Also, when the
   file is closed, any modified data is written to the server.

   If an application wants to serialize access to file data, file
   locking of the file data ranges in question should be used.

   The major addition to NFS version 4 in the area of caching is the
   ability of the server to delegate certain responsibilities to the
   client.  When the server grants a delegation for a file to a client,
   the client is guaranteed certain semantics with respect to the
   sharing of that file with other clients.  At OPEN, the server may
   provide the client either a read or write delegation for the file.
   If the client is granted a read delegation, it is assured that no
   other client has the ability to write to the file for the duration of
   the delegation.  If the client is granted a write delegation, the
   client is assured that no other client has read or write access to
   the file.



Expires: February 2003                                         [Page 11]


Draft Specification      NFS version 4 Protocol              August 2002


   Delegations can be recalled by the server.  If another client
   requests access to the file in such a way that the access conflicts
   with the granted delegation, the server is able to notify the initial
   client and recall the delegation.  This requires that a callback path
   exist between the server and client.  If this callback path does not
   exist, then delegations can not be granted.  The essence of a
   delegation is that it allows the client to locally service operations
   such as OPEN, CLOSE, LOCK, LOCKU, READ, WRITE without immediate
   interaction with the server.


1.3.  General Definitions

   The following definitions are provided for the purpose of providing
   an appropriate context for the reader.


   Client    The "client" is the entity that accesses the NFS server's
             resources.  The client may be an application which contains
             the logic to access the NFS server directly.  The client
             may also be the traditional operating system client remote
             filesystem services for a set of applications.

             In the case of file locking the client is the entity that
             maintains a set of locks on behalf of one or more
             applications.  This client is responsible for crash or
             failure recovery for those locks it manages.

             Note that multiple clients may share the same transport and
             multiple clients may exist on the same network node.

   Clientid  A 64-bit quantity used as a unique, short-hand reference to
             a client supplied Verifier and ID.  The server is
             responsible for supplying the Clientid.

   Lease     An interval of time defined by the server for which the
             client is irrevocably granted a lock.  At the end of a
             lease period the lock may be revoked if the lease has not
             been extended.  The lock must be revoked if a conflicting
             lock has been granted after the lease interval.

             All leases granted by a server have the same fixed
             interval.  Note that the fixed interval was chosen to
             alleviate the expense a server would have in maintaining
             state about variable length leases across server failures.

   Lock      The term "lock" is used to refer to both record (byte-
             range) locks as well as share reservations unless
             specifically stated otherwise.

   Server    The "Server" is the entity responsible for coordinating
             client access to a set of filesystems.


Expires: February 2003                                         [Page 12]


Draft Specification      NFS version 4 Protocol              August 2002


   Stable Storage
             NFS version 4 servers must be able to recover without data
             loss from multiple power failures (including cascading
             power failures, that is, several power failures in quick
             succession), operating system failures, and hardware
             failure of components other than the storage medium itself
             (for example, disk, nonvolatile RAM).

             Some examples of stable storage that are allowable for an
             NFS server include:

             1. Media commit of data, that is, the modified data has
                been successfully written to the disk media,
                for example, the disk platter.

             2. An immediate reply disk drive with battery-backed
                on-drive intermediate storage or uninterruptible power
                system (UPS).

             3. Server commit of data with battery-backed intermediate
                storage and recovery software.

             4. Cache commit with uninterruptible power system (UPS)
                and recovery software.

   Stateid   A 128-bit quantity returned by a server that uniquely
             defines the open and locking state provided by the server
             for a specific open or lock owner for a specific file.

             Stateids composed of all bits 0 or all bits 1 have special
             meaning and are reserved values.

   Verifier  A 64-bit quantity generated by the client that the server
             can use to determine if the client has restarted and lost
             all previous lock state.



















Expires: February 2003                                         [Page 13]


Draft Specification      NFS version 4 Protocol              August 2002


2.  Protocol Data Types

   The syntax and semantics to describe the data types of the NFS
   version 4 protocol are defined in the XDR [RFC1832] and RPC [RFC1831]
   documents.  The next sections build upon the XDR data types to define
   types and structures specific to this protocol.

2.1.  Basic Data Types


   Data Type     Definition
   _____________________________________________________________________
   int32_t       typedef int             int32_t;

   uint32_t      typedef unsigned int    uint32_t;

   int64_t       typedef hyper           int64_t;

   uint64_t      typedef unsigned hyper  uint64_t;

   attrlist4     typedef opaque        attrlist4<>;
                 Used for file/directory attributes

   bitmap4       typedef uint32_t        bitmap4<>;
                 Used in attribute array encoding.

   changeid4     typedef       uint64_t        changeid4;
                 Used in definition of change_info

   clientid4     typedef uint64_t        clientid4;
                 Shorthand reference to client identification

   component4    typedef utf8string      component4;
                 Represents path name components

   count4        typedef uint32_t        count4;
                 Various count parameters (READ, WRITE, COMMIT)

   length4       typedef uint64_t        length4;
                 Describes LOCK lengths

   linktext4     typedef utf8string      linktext4;
                 Symbolic link contents

   mode4         typedef uint32_t        mode4;
                 Mode attribute data type

   nfs_cookie4   typedef uint64_t        nfs_cookie4;
                 Opaque cookie value for READDIR

   nfs_fh4       typedef opaque          nfs_fh4<NFS4_FHSIZE>;
                 Filehandle definition; NFS4_FHSIZE is defined as 128


Expires: February 2003                                         [Page 14]


Draft Specification      NFS version 4 Protocol              August 2002



   nfs_ftype4    enum nfs_ftype4;
                 Various defined file types

   nfsstat4      enum nfsstat4;
                 Return value for operations

   offset4       typedef uint64_t        offset4;
                 Various offset designations (READ, WRITE, LOCK, COMMIT)

   pathname4     typedef component4      pathname4<>;
                 Represents path name for LOOKUP, OPEN and others

   qop4          typedef uint32_t        qop4;
                 Quality of protection designation in SECINFO

   sec_oid4      typedef opaque          sec_oid4<>;
                 Security Object Identifier
                 The sec_oid4 data type is not really opaque.
                 Instead contains an ASN.1 OBJECT IDENTIFIER as used
                 by GSS-API in the mech_type argument to
                 GSS_Init_sec_context.  See [RFC2743] for details.

   seqid4        typedef uint32_t        seqid4;
                 Sequence identifier used for file locking

   utf8string    typedef opaque          utf8string<>;
                 UTF-8 encoding for strings

   verifier4     typedef opaque        verifier4[NFS4_VERIFIER_SIZE];
                 Verifier used for various operations (COMMIT, CREATE,
                 OPEN, READDIR, SETCLIENTID, SETCLIENTID_CONFIRM, WRITE)
                 NFS4_VERIFIER_SIZE is defined as 8


2.2.  Structured Data Types


   nfstime4
                  struct nfstime4 {
                          int64_t seconds;
                          uint32_t nseconds;
                  }

        The nfstime4 structure gives the number of seconds and
        nanoseconds since midnight or 0 hour January 1, 1970 Coordinated
        Universal Time (UTC).  Values greater than zero for the seconds
        field denote dates after the 0 hour January 1, 1970.  Values
        less than zero for the seconds field denote dates before the 0
        hour January 1, 1970.  In both cases, the nseconds field is to
        be added to the seconds field for the final time representation.
        For example, if the time to be represented is one-half second


Expires: February 2003                                         [Page 15]


Draft Specification      NFS version 4 Protocol              August 2002


        before 0 hour January 1, 1970, the seconds field would have a
        value of negative one (-1) and the nseconds fields would have a
        value of one-half second (500000000).  Values greater than
        999,999,999 for nseconds are considered invalid.

        This data type is used to pass time and date information.  A
        server converts to and from its local representation of time
        when processing time values, preserving as much accuracy as
        possible. If the precision of timestamps stored for a filesystem
        object is less than defined, loss of precision can occur.  An
        adjunct time maintenance protocol is recommended to reduce
        client and server time skew.


   time_how4

                  enum time_how4 {
                          SET_TO_SERVER_TIME4 = 0,
                          SET_TO_CLIENT_TIME4 = 1
                  };


   settime4

                  union settime4 switch (time_how4 set_it) {
                   case SET_TO_CLIENT_TIME4:
                           nfstime4       time;
                   default:
                           void;
                  };

        The above definitions are used as the attribute definitions to
        set time values.  If set_it is SET_TO_SERVER_TIME4, then the
        server uses its local representation of time for the time value.


   specdata4

                  struct specdata4 {
                          uint32_t specdata1; /* major device number */
                          uint32_t specdata2; /* minor device number */
                  };

        This data type represents additional information for the device
        file types NF4CHR and NF4BLK.


   fsid4

                  struct fsid4 {
                    uint64_t        major;
                    uint64_t        minor;


Expires: February 2003                                         [Page 16]


Draft Specification      NFS version 4 Protocol              August 2002


                  };

        This type is the filesystem identifier that is used as a
        mandatory attribute.


   fs_location4

                  struct fs_location4 {
                          utf8string    server<>;
                          pathname4     rootpath;
                  };


   fs_locations4

                  struct fs_locations4 {
                          pathname4     fs_root;
                          fs_location4  locations<>;
                  };

        The fs_location4 and fs_locations4 data types are used for the
        fs_locations recommended attribute which is used for migration
        and replication support.


   fattr4

                  struct fattr4 {
                          bitmap4       attrmask;
                          attrlist4     attr_vals;
                  };

        The fattr4 structure is used to represent file and directory
        attributes.

        The bitmap is a counted array of 32 bit integers used to contain
        bit values.  The position of the integer in the array that
        contains bit n can be computed from the expression (n / 32) and
        its bit within that integer is (n mod 32).

                                      0            1
                    +-----------+-----------+-----------+--
                    |  count    | 31  ..  0 | 63  .. 32 |
                    +-----------+-----------+-----------+--


   change_info4

                  struct change_info4 {
                          bool          atomic;
                          changeid4     before;


Expires: February 2003                                         [Page 17]


Draft Specification      NFS version 4 Protocol              August 2002


                          changeid4     after;
                  };

        This structure is used with the CREATE, LINK, REMOVE, RENAME
        operations to let the client know the value of the change
        attribute for the directory in which the target filesystem
        object resides.


   clientaddr4

                  struct clientaddr4 {
                          /* see struct rpcb in RFC1833 */
                          string r_netid<>;    /* network id */
                          string r_addr<>;     /* universal address */
                  };

        The clientaddr4 structure is used as part of the SETCLIENTID
        operation to either specify the address of the client that is
        using a clientid or as part of the callback registration.  The
        r_netid and r_addr fields are specified in [RFC1833], but they
        are underspecified in [RFC1833] as far as what they should look
        like for specific protocols.

        For TCP over IPv4 and for UDP over IPv4, the format of r_addr is
        the US-ASCII string:

             h1.h2.h3.h4.p1.p2

        The prefix, "h1.h2.h3.h4", is the standard textual form for
        representing an IPv4 address, which is always four octets long.
        Assuming big-endian ordering, h1, h2, h3, and h4, are
        respectively, the first through fourth octets each converted to
        ASCII-decimal.  Assuming big-endian ordering, p1 and p2 are,
        respectively, the first and second octets each converted to
        ASCII-decimal. For example, if a host, in big-endian order, has
        an address of 0x0A010307 and there is a service listening on, in
        big endian order, port 0x020F (decimal 527), then complete
        universal address is "10.1.3.7.2.15".

        For TCP over IPv4 the value of r_netid is the string "tcp".  For
        UDP over IPv4 the value of r_netid is the string "udp".

        For TCP over IPv4 and for UDP over IPv6, the format of r_addr is
        the US-ASCII string:

             x1:x2:x3:x4:x5:x6:x7:x8.p1.p2

        The suffix "p1.p2" is the service port, and is computed the same
        way as with univeral addresses for TCP and UDP over IPv4. The
        prefix, "x1:x2:x3:x4:x5:x6:x7:x8", is the standard textual form
        for representing an IPv6 address as defined in Section 2.2 of


Expires: February 2003                                         [Page 18]


Draft Specification      NFS version 4 Protocol              August 2002


        [RFC1884].  Additionally, the two alternative forms specified in
        Section 2.2 of [RFC1884] are also acceptable.

        For TCP over IPv6 the value of r_netid is the string "tcp6".
        For UDP over IPv6 the value of r_netid is the string "udp6".


   cb_client4

                  struct cb_client4 {
                          unsigned int  cb_program;
                          clientaddr4   cb_location;
                  };

        This structure is used by the client to inform the server of its
        call back address; includes the program number and client
        address.


   nfs_client_id4

                  struct nfs_client_id4 {
                          verifier4     verifier;
                          opaque        id<NFS4_OPAQUE_LIMIT>;
                  };

        This structure is part of the arguments to the SETCLIENTID
        operation.  NFS4_OPAQUE_LIMIT is defined as 1024.


   open_owner4

                  struct open_owner4 {
                          clientid4     clientid;
                          opaque        owner<NFS4_OPAQUE_LIMIT>;
                  };

        This structure is used to identify the owner of open state.
        NFS4_OPAQUE_LIMIT is defined as 1024.



   lock_owner4

                  struct lock_owner4 {
                          clientid4     clientid;
                          opaque        owner<NFS4_OPAQUE_LIMIT>;
                  };

        This structure is used to identify the owner of file locking
        state.  NFS4_OPAQUE_LIMIT is defined as 1024.



Expires: February 2003                                         [Page 19]


Draft Specification      NFS version 4 Protocol              August 2002


   open_to_lock_owner4

               struct open_to_lock_owner4 {
               seqid4          open_seqid;
               stateid4        open_stateid;
               seqid4          lock_seqid;
               lock_owner4     lock_owner;
               };

        This structure is used for the first LOCK operation done for an
        open_owner4.  It provides both the open_stateid and lock_owner
        such that the transition is made from a valid open_stateid
        sequence to that of the new lock_stateid sequence.  Using this
        mechanism avoids the confirmation of the lock_owner/lock_seqid
        pair since it is tied to established state in the form of the
        open_stateid/open_seqid.


   stateid4

                  struct stateid4 {
                    uint32_t        seqid;
                    opaque          other[12];
                  };

        This structure is used for the various state sharing mechanisms
        between the client and server.  For the client, this data
        structure is read-only.  The starting value of the seqid field
        is undefined. The server is required to increment the seqid
        field monotonically at each transition of the stateid.  This is
        important since the client will inspect the seqid in OPEN
        stateids to determine the order of OPEN processing done by the
        server.





















Expires: February 2003                                         [Page 20]


Draft Specification      NFS version 4 Protocol              August 2002


3.  RPC and Security Flavor

   The NFS version 4 protocol is a Remote Procedure Call (RPC)
   application that uses RPC version 2 and the corresponding eXternal
   Data Representation (XDR) as defined in [RFC1831] and [RFC1832].  The
   RPCSEC_GSS security flavor as defined in [RFC2203] MUST be used as
   the mechanism to deliver stronger security for the NFS version 4
   protocol.

3.1.  Ports and Transports

   Historically, NFS version 2 and version 3 servers have resided on
   port 2049.  The registered port 2049 [RFC1700] for the NFS protocol
   should be the default configuration.  Using the registered port for
   NFS services means the NFS client will not need to use the RPC
   binding protocols as described in [RFC1833]; this will allow NFS to
   transit firewalls.

   The transport used by the RPC service for the NFS version 4 protocol
   MUST provide congestion control comparable to that defined for TCP in
   [RFC2581].  If the operating environment implements TCP, the NFS
   version 4 protocol SHOULD be supported over TCP.  The NFS client and
   server MAY use other transports if they support congestion control as
   defined above and in those cases a mechanism may be provided to
   override TCP usage in favor of another transport.

   If TCP is used as the transport, the client and server SHOULD use
   persistent connections.  This will prevent the weakening of TCP's
   congestion control via short lived connections and will improve
   performance for the WAN environment by eliminating the need for SYN
   handshakes.

   Note that for various timers, the client and server should avoid
   inadvertent synchronization of those timers.  For further discussion
   of the general issue refer to [Floyd].


3.1.1.  Client Retransmission Behavior

   When processing a request received over a reliable transport such as
   TCP, the NFS version 4 server MUST NOT silently drop the request,
   except if the transport connection has been broken. Given such a
   contract between NFS version 4 clients and servers, clients MUST NOT
   retry a request unless one or both of the following are true:

   o    The transport connection has been broken

   o    The procedure being retried is the NULL procedure


   Since transports, including TCP, do not always synchronously inform a
   peer when the other peer has broken the connection (for example, when


Expires: February 2003                                         [Page 21]


Draft Specification      NFS version 4 Protocol              August 2002


   an NFS server reboots), so the NFS version 4 client may want to
   actively "probe" the connection to see if has been broken.  Use of
   the NULL procedure is one recommended way to do so.  So, when a
   client experiences a remote procedure call timeout (of some arbitrary
   implementation specific amount), rather than retrying the remote
   procedure call, it could instead issue a NULL procedure call to the
   server. If the server has died, the transport connection break will
   eventually be indicated to the NFS version 4 client. The client can
   then reconnect, and then retry the original request. If the NULL
   procedure call gets a response, the connection has not broken.  The
   client can decide to wait longer for the original request's response,
   or it can break the transport connection and reconnect before re-
   sending the original request.

   For callbacks from the server to the client, the same rules apply,
   but the server doing the callback becomes the client, and the client
   receiving the callback becomes the server.


3.2.  Security Flavors

   Traditional RPC implementations have included AUTH_NONE, AUTH_SYS,
   AUTH_DH, and AUTH_KRB4 as security flavors.  With [RFC2203] an
   additional security flavor of RPCSEC_GSS has been introduced which
   uses the functionality of GSS-API [RFC2743].  This allows for the use
   of various security mechanisms by the RPC layer without the
   additional implementation overhead of adding RPC security flavors.
   For NFS version 4, the RPCSEC_GSS security flavor MUST be used to
   enable the mandatory security mechanism.  Other flavors, such as,
   AUTH_NONE, AUTH_SYS, and AUTH_DH MAY be implemented as well.

3.2.1.  Security mechanisms for NFS version 4

   The use of RPCSEC_GSS requires selection of: mechanism, quality of
   protection, and service (authentication, integrity, privacy).  The
   remainder of this document will refer to these three parameters of
   the RPCSEC_GSS security as the security triple.

3.2.1.1.  Kerberos V5 as a security triple

   The Kerberos V5 GSS-API mechanism as described in [RFC1964] MUST be
   implemented and provide the following security triples.

 column descriptions:

 1 == number of pseudo flavor
 2 == name of pseudo flavor
 3 == mechanism's OID
 4 == mechanism's algorithm(s)
 5 == RPCSEC_GSS service

 1      2     3                    4              5


Expires: February 2003                                         [Page 22]


Draft Specification      NFS version 4 Protocol              August 2002


 -----------------------------------------------------------------------
 390003 krb5  1.2.840.113554.1.2.2 DES MAC MD5    rpc_gss_svc_none
 390004 krb5i 1.2.840.113554.1.2.2 DES MAC MD5    rpc_gss_svc_integrity
 390005 krb5p 1.2.840.113554.1.2.2 DES MAC MD5    rpc_gss_svc_privacy
                                   for integrity,
                                   and 56 bit DES
                                   for privacy.

   Note that the pseudo flavor is presented here as a mapping aid to the
   implementor.  Because this NFS protocol includes a method to
   negotiate security and it understands the GSS-API mechanism, the
   pseudo flavor is not needed.  The pseudo flavor is needed for NFS
   version 3 since the security negotiation is done via the MOUNT
   protocol.

   For a discussion of NFS' use of RPCSEC_GSS and Kerberos V5, please
   see [RFC2623].


3.2.1.2.  LIPKEY as a security triple

   The LIPKEY GSS-API mechanism as described in [RFC2847] MUST be
   implemented and provide the following security triples. The
   definition of the columns matches the previous subsection "Kerberos
   V5 as security triple"

 1      2        3                    4              5
 -----------------------------------------------------------------------
 390006 lipkey   1.3.6.1.5.5.9        negotiated  rpc_gss_svc_none
 390007 lipkey-i 1.3.6.1.5.5.9        negotiated  rpc_gss_svc_integrity
 390008 lipkey-p 1.3.6.1.5.5.9        negotiated  rpc_gss_svc_privacy

   The mechanism algorithm is listed as "negotiated".  This is because
   LIPKEY is layered on SPKM-3 and in SPKM-3 [RFC2847] the
   confidentiality and integrity algorithms are negotiated.  Since
   SPKM-3 specifies HMAC-MD5 for integrity as MANDATORY, 128 bit
   cast5CBC for confidentiality for privacy as MANDATORY, and further
   specifies that HMAC-MD5 and cast5CBC MUST be listed first before
   weaker algorithms, specifying "negotiated" in column 4 does not
   impair interoperability.  In the event an SPKM-3 peer does not
   support the mandatory algorithms, the other peer is free to accept or
   reject the GSS-API context creation.

   Because SPKM-3 negotiates the algorithms, subsequent calls to
   LIPKEY's GSS_Wrap() and GSS_GetMIC() by RPCSEC_GSS will use a quality
   of protection value of 0 (zero).  See section 5.2 of [RFC2025] for an
   explanation.

   LIPKEY uses SPKM-3 to create a secure channel in which to pass a user
   name and password from the client to the server.  Once the user name
   and password have been accepted by the server, calls to the LIPKEY
   context are redirected to the SPKM-3 context. See [RFC2847] for more


Expires: February 2003                                         [Page 23]


Draft Specification      NFS version 4 Protocol              August 2002


   details.


3.2.1.3.  SPKM-3 as a security triple

   The SPKM-3 GSS-API mechanism as described in [RFC2847] MUST be
   implemented and provide the following security triples. The
   definition of the columns matches the previous subsection "Kerberos
   V5 as security triple".

 1      2        3                    4              5
 -----------------------------------------------------------------------
 390009 spkm3    1.3.6.1.5.5.1.3      negotiated  rpc_gss_svc_none
 390010 spkm3i   1.3.6.1.5.5.1.3      negotiated  rpc_gss_svc_integrity
 390011 spkm3p   1.3.6.1.5.5.1.3      negotiated  rpc_gss_svc_privacy

   For a discussion as to why the mechanism algorithm is listed as
   "negotiated", see the previous section "LIPKEY as a security triple."

   Because SPKM-3 negotiates the algorithms, subsequent calls to SPKM-
   3's GSS_Wrap() and GSS_GetMIC() by RPCSEC_GSS will use a quality of
   protection value of 0 (zero). See section 5.2 of [RFC2025] for an
   explanation.

   Even though LIPKEY is layered over SPKM-3, SPKM-3 is specified as a
   mandatory set of triples to handle the situations where the initiator
   (the client) is anonymous or where the initiator has its own
   certificate.  If the initiator is anonymous, there will not be a user
   name and password to send to the target (the server).  If the
   initiator has its own certificate, then using passwords is
   superfluous.


3.3.  Security Negotiation

   With the NFS version 4 server potentially offering multiple security
   mechanisms, the client needs a method to determine or negotiate which
   mechanism is to be used for its communication with the server.  The
   NFS server may have multiple points within its filesystem name space
   that are available for use by NFS clients.  In turn the NFS server
   may be configured such that each of these entry points may have
   different or multiple security mechanisms in use.

   The security negotiation between client and server must be done with
   a secure channel to eliminate the possibility of a third party
   intercepting the negotiation sequence and forcing the client and
   server to choose a lower level of security than required or desired.
   See the section "Security Considerations" for further discussion.






Expires: February 2003                                         [Page 24]


Draft Specification      NFS version 4 Protocol              August 2002


3.3.1.  SECINFO

   The new SECINFO operation will allow the client to determine, on a
   per filehandle basis, what security triple is to be used for server
   access.  In general, the client will not have to use the SECINFO
   operation except during initial communication with the server or when
   the client crosses policy boundaries at the server.  It is possible
   that the server's policies change during the client's interaction
   therefore forcing the client to negotiate a new security triple.


3.3.2.  Security Error

   Based on the assumption that each NFS version 4 client and server
   must support a minimum set of security (i.e. LIPKEY, SPKM-3, and
   Kerberos-V5 all under RPCSEC_GSS), the NFS client will start its
   communication with the server with one of the minimal security
   triples.  During communication with the server, the client may
   receive an NFS error of NFS4ERR_WRONGSEC.  This error allows the
   server to notify the client that the security triple currently being
   used is not appropriate for access to the server's filesystem
   resources.  The client is then responsible for determining what
   security triples are available at the server and choose one which is
   appropriate for the client.  See the section for the "SECINFO"
   operation for further discussion of how the client will respond to
   the NFS4ERR_WRONGSEC error and use SECINFO.


3.4.  Callback RPC Authentication

   Except as noted elsewhere in this section, the callback RPC
   (described later) MUST mutually authenticate the NFS server to the
   principal that acquired the clientid (also described later), using
   the security flavor the original SETCLIENTID operation used.

   For AUTH_NONE, there are no principals, so this is a non-issue.

   AUTH_SYS has no notions of mutual authentation or a server principal,
   so the callback from the server simply uses the AUTH_SYS credential
   that the user used when he set up the delegation.

   For AUTH_DH, one commonly used convention is that the server uses the
   credential corresponding to this AUTH_DH principal:

           unix.host@domain

   where host and domain are variables corresponding to the name of
   server host and directory services domain in which it lives such as a
   Network Information System domain or a DNS domain.

   Because LIPKEY is layered over SPKM-3, it is permissible for the
   server to use SPKM-3 and not LIPKEY for the callback even if the


Expires: February 2003                                         [Page 25]


Draft Specification      NFS version 4 Protocol              August 2002


   client used LIPKEY for SETCLIENTID.

   Regardless of what security mechanism under RPCSEC_GSS is being used,
   the NFS server, MUST identify itself in GSS-API via a
   GSS_C_NT_HOSTBASED_SERVICE name type.  GSS_C_NT_HOSTBASED_SERVICE
   names are of the form:

           service@hostname

   For NFS, the "service" element is

           nfs

   Implementations of security mechanisms will convert nfs@hostname to
   various different forms. For Kerberos V5 and LIPKEY, the following
   form is RECOMMENDED:

           nfs/hostname

   For Kerberos V5, nfs/hostname would be a server principal in the
   Kerberos Key Distribution Center database.  For LIPKEY, this would be
   the username passed to the target (the NFS version 4 client that
   receives the callback).

   It should be noted that LIPKEY may not work for callbacks, since the
   LIPKEY client uses a user id/password.  If the NFS client receiving
   the callback can authenticate the NFS server's user name/password
   pair, and if the user that the NFS server is authenticating to has a
   public key certificate, then it works.

   In situations where the NFS client uses LIPKEY and uses a per-host
   principal for the SETCLIENTID operation, instead of using LIPKEY for
   SETCLIENTID, it is RECOMMENDED that SPKM-3 with mutual authentication
   be used.  This effectively means that the client will use a
   certificate to authenticate and identify the initiator to the target
   on the NFS server.  Using SPKM-3 and not LIPKEY has the following
   advantages:

   o    When the server does a callback, it must authenticate to the
        principal used in the SETCLIENTID.  Even if LIPKEY is used,
        because LIPKEY is layered over SPKM-3, the NFS client will need
        to have a certificate that corresponds to the principal used in
        the SETCLIENTID operation.  From an administrative perspective,
        having a user name, password, and certificate for both the
        client and server is redundant.

   o    LIPKEY was intended to minimize additional infrastructure
        requirements beyond a certificate for the target, and the
        expectation is that existing password infrastructure can be
        leveraged for the initiator.  In some environments, a per-host
        password does not exist yet.  If certificates are used for any
        per-host principals, then additional password infrastructure is


Expires: February 2003                                         [Page 26]


Draft Specification      NFS version 4 Protocol              August 2002


        not needed.

   o    In cases when a host is both an NFS client and server, it can
        share the same per-host certificate.


















































Expires: February 2003                                         [Page 27]


Draft Specification      NFS version 4 Protocol              August 2002


4.  Filehandles

   The filehandle in the NFS protocol is a per server unique identifier
   for a filesystem object.  The contents of the filehandle are opaque
   to the client.  Therefore, the server is responsible for translating
   the filehandle to an internal representation of the filesystem
   object.


4.1.  Obtaining the First Filehandle

   The operations of the NFS protocol are defined in terms of one or
   more filehandles.  Therefore, the client needs a filehandle to
   initiate communication with the server.  With the NFS version 2
   protocol [RFC1094] and the NFS version 3 protocol [RFC1813], there
   exists an ancillary protocol to obtain this first filehandle.  The
   MOUNT protocol, RPC program number 100005, provides the mechanism of
   translating a string based filesystem path name to a filehandle which
   can then be used by the NFS protocols.

   The MOUNT protocol has deficiencies in the area of security and use
   via firewalls.  This is one reason that the use of the public
   filehandle was introduced in [RFC2054] and [RFC2055].  With the use
   of the public filehandle in combination with the LOOKUP operation in
   the NFS version 2 and 3 protocols, it has been demonstrated that the
   MOUNT protocol is unnecessary for viable interaction between NFS
   client and server.

   Therefore, the NFS version 4 protocol will not use an ancillary
   protocol for translation from string based path names to a
   filehandle.  Two special filehandles will be used as starting points
   for the NFS client.


4.1.1.  Root Filehandle

   The first of the special filehandles is the ROOT filehandle.  The
   ROOT filehandle is the "conceptual" root of the filesystem name space
   at the NFS server.  The client uses or starts with the ROOT
   filehandle by employing the PUTROOTFH operation.  The PUTROOTFH
   operation instructs the server to set the "current" filehandle to the
   ROOT of the server's file tree.  Once this PUTROOTFH operation is
   used, the client can then traverse the entirety of the server's file
   tree with the LOOKUP operation.  A complete discussion of the server
   name space is in the section "NFS Server Name Space".


4.1.2.  Public Filehandle

   The second special filehandle is the PUBLIC filehandle.  Unlike the
   ROOT filehandle, the PUBLIC filehandle may be bound or represent an
   arbitrary filesystem object at the server.  The server is responsible


Expires: February 2003                                         [Page 28]


Draft Specification      NFS version 4 Protocol              August 2002


   for this binding.  It may be that the PUBLIC filehandle and the ROOT
   filehandle refer to the same filesystem object.  However, it is up to
   the administrative software at the server and the policies of the
   server administrator to define the binding of the PUBLIC filehandle
   and server filesystem object.  The client may not make any
   assumptions about this binding. The client uses the PUBLIC filehandle
   via the PUTPUBFH operation.


4.2.  Filehandle Types

   In the NFS version 2 and 3 protocols, there was one type of
   filehandle with a single set of semantics.  This type of filehandle
   is termed "persistent" in NFS Version 4.  The semantics of a
   persistent filehandle remain the same as before.  A new type of
   filehandle introduced in NFS Version 4 is the "volatile" filehandle,
   which attempts to accommodate certain server environments.

   The volatile filehandle type was introduced to address server
   functionality or implementation issues which make correct
   implementation of a persistent filehandle infeasible.  Some server
   environments do not provide a filesystem level invariant that can be
   used to construct a persistent filehandle.  The underlying server
   filesystem may not provide the invariant or the server's filesystem
   programming interfaces may not provide access to the needed
   invariant.  Volatile filehandles may ease the implementation of
   server functionality such as hierarchical storage management or
   filesystem reorganization or migration.  However, the volatile
   filehandle increases the implementation burden for the client.

   Since the client will need to handle persistent and volatile
   filehandles differently, a file attribute is defined which may be
   used by the client to determine the filehandle types being returned
   by the server.


4.2.1.  General Properties of a Filehandle

   The filehandle contains all the information the server needs to
   distinguish an individual file.  To the client, the filehandle is
   opaque. The client stores filehandles for use in a later request and
   can compare two filehandles from the same server for equality by
   doing a byte-by-byte comparison.  However, the client MUST NOT
   otherwise interpret the contents of filehandles.  If two filehandles
   from the same server are equal, they MUST refer to the same file.
   Servers SHOULD try to maintain a one-to-one correspondence between
   filehandles and files but this is not required.  Clients MUST use
   filehandle comparisons only to improve performance, not for correct
   behavior.  All clients need to be prepared for situations in which it
   cannot be determined whether two filehandles denote the same object
   and in such cases, avoid making invalid assumpions which might cause
   incorrect behavior.  Further discussion of filehandle and attribute


Expires: February 2003                                         [Page 29]


Draft Specification      NFS version 4 Protocol              August 2002


   comparison in the context of data caching is presented in the section
   "Data Caching and File Identity".

   As an example, in the case that two different path names when
   traversed at the server terminate at the same filesystem object, the
   server SHOULD return the same filehandle for each path.  This can
   occur if a hard link is used to create two file names which refer to
   the same underlying file object and associated data.  For example, if
   paths /a/b/c and /a/d/c refer to the same file, the server SHOULD
   return the same filehandle for both path names traversals.


4.2.2.  Persistent Filehandle

   A persistent filehandle is defined as having a fixed value for the
   lifetime of the filesystem object to which it refers.  Once the
   server creates the filehandle for a filesystem object, the server
   MUST accept the same filehandle for the object for the lifetime of
   the object.  If the server restarts or reboots the NFS server must
   honor the same filehandle value as it did in the server's previous
   instantiation.  Similarly, if the filesystem is migrated, the new NFS
   server must honor the same filehandle as the old NFS server.

   The persistent filehandle will be become stale or invalid when the
   filesystem object is removed.  When the server is presented with a
   persistent filehandle that refers to a deleted object, it MUST return
   an error of NFS4ERR_STALE.  A filehandle may become stale when the
   filesystem containing the object is no longer available.  The file
   system may become unavailable if it exists on removable media and the
   media is no longer available at the server or the filesystem in whole
   has been destroyed or the filesystem has simply been removed from the
   server's name space (i.e. unmounted in a UNIX environment).


4.2.3.  Volatile Filehandle

   A volatile filehandle does not share the same longevity
   characteristics of a persistent filehandle.  The server may determine
   that a volatile filehandle is no longer valid at many different
   points in time.  If the server can definitively determine that a
   volatile filehandle refers to an object that has been removed, the
   server should return NFS4ERR_STALE to the client (as is the case for
   persistent filehandles).  In all other cases where the server
   determines that a volatile filehandle can no longer be used, it
   should return an error of NFS4ERR_FHEXPIRED.

   The mandatory attribute "fh_expire_type" is used by the client to
   determine what type of filehandle the server is providing for a
   particular filesystem.  This attribute is a bitmask with the
   following values:




Expires: February 2003                                         [Page 30]


Draft Specification      NFS version 4 Protocol              August 2002


   FH4_PERSISTENT
        The value of FH4_PERSISTENT is used to indicate a persistent
        filehandle, which is valid until the object is removed from the
        filesystem.  The server will not return NFS4ERR_FHEXPIRED for
        this filehandle.  FH4_PERSISTENT is defined as a value in which
        none of the bits specified below are set.

   FH4_VOLATILE_ANY
        The filehandle may expire at any time, except as specifically
        excluded (i.e. FH4_NO_EXPIRE_WITH_OPEN).

   FH4_NOEXPIRE_WITH_OPEN
        May only be set when FH4_VOLATILE_ANY is set.  If this bit is
        set, then the meaning of FH4_VOLATILE_ANY is qualified to
        exclude any expiration of the filehandle when it is open.

   FH4_VOL_MIGRATION
        The filehandle will expire as a result of migration.  If
        FH4_VOL_ANY is set, FH4_VOL_MIGRATION is redundant.

   FH4_VOL_RENAME
        The filehandle will expire during rename.  This includes a
        rename by the requesting client or a rename by any other client.
        If FH4_VOL_ANY is set, FH4_VOL_RENAME is redundant.

        Servers which provide volatile filehandles that may expire while
        open (i.e. if FH4_VOL_MIGRATION or FH4_VOL_RENAME is set or if
        FH4_VOLATILE_ANY is set and FH4_NOEXPIRE_WITH_OPEN not set),
        should deny a RENAME or REMOVE that would affect an OPEN file of
        any of the components leading to the OPEN file.  In addition,
        the server should deny all RENAME or REMOVE requests during the
        grace period upon server restart.

        Note that the bits FH4_VOL_MIGRATION and FH4_VOL_RENAME allow
        the client to determine that expiration has occurred whenever a
        specific event occurs, without an explicit filehandle expiration
        error from the server.  FH4_VOL_ANY does not provide this form
        of information. In situations where the server will expire many,
        but not all filehandles upon migration (e.g. all but those that
        are open), FH4_VOLATILE_ANY (in this case with
        FH4_NOEXPIRE_WITH_OPEN) is a better choice since the client may
        not assume that all filehandles will expire when migration
        occurs, and it is likely that additional expirations will occur
        (as a result of file CLOSE) that are separated in time from the
        migration event itself.


4.2.4.  One Method of Constructing a Volatile Filehandle

   As mentioned, in some instances a filehandle is stale (no longer
   valid; perhaps because the file was removed from the server) or it is
   expired (the underlying file is valid but since the filehandle is


Expires: February 2003                                         [Page 31]


Draft Specification      NFS version 4 Protocol              August 2002


   volatile, it may have expired).  Thus the server needs to be able to
   return NFS4ERR_STALE in the former case and NFS4ERR_FHEXPIRED in the
   latter case. This can be done by careful construction of the volatile
   filehandle.  One possible implementation follows.

   A volatile filehandle, while opaque to the client could contain:

   [volatile bit = 1 | server boot time | slot | generation number]


   o    slot is an index in the server volatile filehandle table

   o    generation number is the generation number for the table
        entry/slot

   If the server boot time is less than the current server boot time,
   return NFS4ERR_FHEXPIRED.  If slot is out of range, return
   NFS4ERR_BADHANDLE.  If the generation number does not match, return
   NFS4ERR_FHEXPIRED.

   When the server reboots, the table is gone (it is volatile).

   If volatile bit is 0, then it is a persistent filehandle with a
   different structure following it.


4.3.  Client Recovery from Filehandle Expiration

   If possible, the client SHOULD recover from the receipt of an
   NFS4ERR_FHEXPIRED error.  The client must take on additional
   responsibility so that it may prepare itself to recover from the
   expiration of a volatile filehandle.  If the server returns
   persistent filehandles, the client does not need these additional
   steps.

   For volatile filehandles, most commonly the client will need to store
   the component names leading up to and including the filesystem object
   in question.  With these names, the client should be able to recover
   by finding a filehandle in the name space that is still available or
   by starting at the root of the server's filesystem name space.

   If the expired filehandle refers to an object that has been removed
   from the filesystem, obviously the client will not be able to recover
   from the expired filehandle.

   It is also possible that the expired filehandle refers to a file that
   has been renamed.  If the file was renamed by another client, again
   it is possible that the original client will not be able to recover.
   However, in the case that the client itself is renaming the file and
   the file is open, it is possible that the client may be able to
   recover.  The client can determine the new path name based on the
   processing of the rename request.  The client can then regenerate the


Expires: February 2003                                         [Page 32]


Draft Specification      NFS version 4 Protocol              August 2002


   new filehandle based on the new path name.  The client could also use
   the compound operation mechanism to construct a set of operations
   like:
           RENAME A B
           LOOKUP B
           GETFH
   Note that the COMPOUND procedure does not provide atomicity.  This
   example only reduces the overhead of recovering from an expired
   filehandle.













































Expires: February 2003                                         [Page 33]


Draft Specification      NFS version 4 Protocol              August 2002


5.  File Attributes

   To meet the requirements of extensibility and increased
   interoperability with non-UNIX platforms, attributes must be handled
   in a flexible manner.  The NFS version 3 fattr3 structure contains a
   fixed list of attributes that not all clients and servers are able to
   support or care about.  The fattr3 structure can not be extended as
   new needs arise and it provides no way to indicate non-support.  With
   the NFS version 4 protocol, the client is able query what attributes
   the server supports and construct requests with only those supported
   attributes (or a subset thereof).

   To this end, attributes are divided into three groups: mandatory,
   recommended, and named.  Both mandatory and recommended attributes
   are supported in the NFS version 4 protocol by a specific and well-
   defined encoding and are identified by number.  They are requested by
   setting a bit in the bit vector sent in the GETATTR request; the
   server response includes a bit vector to list what attributes were
   returned in the response.  New mandatory or recommended attributes
   may be added to the NFS protocol between major revisions by
   publishing a standards-track RFC which allocates a new attribute
   number value and defines the encoding for the attribute.  See the
   section "Minor Versioning" for further discussion.

   Named attributes are accessed by the new OPENATTR operation, which
   accesses a hidden directory of attributes associated with a file
   system object.  OPENATTR takes a filehandle for the object and
   returns the filehandle for the attribute hierarchy.  The filehandle
   for the named attributes is a directory object accessible by LOOKUP
   or READDIR and contains files whose names represent the named
   attributes and whose data bytes are the value of the attribute.  For
   example:


          LOOKUP     "foo"       ; look up file
          GETATTR    attrbits
          OPENATTR               ; access foo's named attributes
          LOOKUP     "x11icon"   ; look up specific attribute
          READ       0,4096      ; read stream of bytes


   Named attributes are intended for data needed by applications rather
   than by an NFS client implementation.  NFS implementors are strongly
   encouraged to define their new attributes as recommended attributes
   by bringing them to the IETF standards-track process.

   The set of attributes which are classified as mandatory is
   deliberately small since servers must do whatever it takes to support
   them.  A server should support as many of the recommended attributes
   as possible but by their definition, the server is not required to
   support all of them.  Attributes are deemed mandatory if the data is
   both needed by a large number of clients and is not otherwise


Expires: February 2003                                         [Page 34]


Draft Specification      NFS version 4 Protocol              August 2002


   reasonably computable by the client when support is not provided on
   the server.

   Note that the hidden directory returned by OPENATTR is a convenience
   for protocol processing.  The client should not make any assumptions
   about the server's implementation of named attributes and whether the
   underlying filesystem at the server has a named attribute directory
   or not.  Therefore, operations such as SETATTR and GETATTR on the
   named attribute directory are undefined.


5.1.  Mandatory Attributes

   These MUST be supported by every NFS version 4 client and server in
   order to ensure a minimum level of interoperability.  The server must
   store and return these attributes and the client must be able to
   function with an attribute set limited to these attributes.  With
   just the mandatory attributes some client functionality may be
   impaired or limited in some ways.  A client may ask for any of these
   attributes to be returned by setting a bit in the GETATTR request and
   the server must return their value.


5.2.  Recommended Attributes

   These attributes are understood well enough to warrant support in the
   NFS version 4 protocol.  However, they may not be supported on all
   clients and servers.  A client may ask for any of these attributes to
   be returned by setting a bit in the GETATTR request but must handle
   the case where the server does not return them.  A client may ask for
   the set of attributes the server supports and should not request
   attributes the server does not support.  A server should be tolerant
   of requests for unsupported attributes and simply not return them
   rather than considering the request an error.  It is expected that
   servers will support all attributes they comfortably can and only
   fail to support attributes which are difficult to support in their
   operating environments.  A server should provide attributes whenever
   they don't have to "tell lies" to the client.  For example, a file
   modification time should be either an accurate time or should not be
   supported by the server.  This will not always be comfortable to
   clients but the client is better positioned decide whether and how to
   fabricate or construct an attribute or whether to do without the
   attribute.



5.3.  Named Attributes

   These attributes are not supported by direct encoding in the NFS
   Version 4 protocol but are accessed by string names rather than
   numbers and correspond to an uninterpreted stream of bytes which are
   stored with the filesystem object.  The name space for these


Expires: February 2003                                         [Page 35]


Draft Specification      NFS version 4 Protocol              August 2002


   attributes may be accessed by using the OPENATTR operation.  The
   OPENATTR operation returns a filehandle for a virtual "attribute
   directory" and further perusal of the name space may be done using
   READDIR and LOOKUP operations on this filehandle.  Named attributes
   may then be examined or changed by normal READ and WRITE and CREATE
   operations on the filehandles returned from READDIR and LOOKUP.
   Named attributes may have attributes.

   It is recommended that servers support arbitrary named attributes.  A
   client should not depend on the ability to store any named attributes
   in the server's filesystem.  If a server does support named
   attributes, a client which is also able to handle them should be able
   to copy a file's data and meta-data with complete transparency from
   one location to another; this would imply that names allowed for
   regular directory entries are valid for named attribute names as
   well.

   Names of attributes will not be controlled by this document or other
   IETF standards track documents.  See the section "IANA
   Considerations" for further discussion.


5.4.  Classification of Attributes

   Each of the Mandatory and Recommended attributes can be classified in
   one of three categories: per server, per filesystem, or per
   filesystem object.  Note that it is possible that some per filesystem
   attributes may vary within the filesystem.  See the "homogeneous"
   attribute for its definition.  Note that the attributes
   time_access_set and time_modify_set are not listed below because they
   are write-only attributes used in a special instance of SETATTR.

   o    The per server attribute is:

        lease_time

   o    The per filesystem attributes are:

        supp_attr, fh_expire_type, link_support, symlink_support,
        unique_handles, aclsupport, cansettime, case_insensitive,
        case_preserving, chown_restricted, files_avail, files_free,
        files_total, fs_locations, homogeneous, maxfilesize, maxname,
        maxread, maxwrite, no_trunc, space_avail, space_free,
        space_total, time_delta

   o    The per filesystem object attributes are:

        type, change, size, named_attr, fsid, rdattr_error, filehandle,
        ACL, archive, fileid, hidden, maxlink, mimetype, mode, numlinks,
        owner, owner_group, rawdev, space_used, system, time_access,
        time_backup, time_create, time_metadata, time_modify,
        mounted_on_fileid


Expires: February 2003                                         [Page 36]


Draft Specification      NFS version 4 Protocol              August 2002


   For quota_avail_hard, quota_avail_soft, and quota_used see their
   definitions below for the appropriate classification.




















































Expires: February 2003                                         [Page 37]


Draft Specification      NFS version 4 Protocol              August 2002


5.5.  Mandatory Attributes - Definitions


   Name              #    DataType     Access   Description
   ___________________________________________________________________
   supp_attr         0    bitmap       READ     The bit vector which
                                                would retrieve all
                                                mandatory and
                                                recommended attributes
                                                that are supported for
                                                this object.  The
                                                scope of this
                                                attribute applies to
                                                all objects with a
                                                matching fsid.

   type              1    nfs4_ftype   READ     The type of the object
                                                (file, directory,
                                                symlink, etc.)

   fh_expire_type    2    uint32       READ     Server uses this to
                                                specify filehandle
                                                expiration behavior to
                                                the client.  See the
                                                section "Filehandles"
                                                for additional
                                                description.

   change            3    uint64       READ     A value created by the
                                                server that the client
                                                can use to determine
                                                if file data,
                                                directory contents or
                                                attributes of the
                                                object have been
                                                modified.  The server
                                                may return the
                                                object's time_metadata
                                                attribute for this
                                                attribute's value but
                                                only if the filesystem
                                                object can not be
                                                updated more
                                                frequently than the
                                                resolution of
                                                time_metadata.

   size              4    uint64       R/W
                                                The size of the object
                                                in bytes.





Expires: February 2003                                         [Page 38]


Draft Specification      NFS version 4 Protocol              August 2002


   link_support      5    bool         READ     True, if the object's
                                                filesystem supports
                                                hard links.

   symlink_support   6    bool         READ     True, if the object's
                                                filesystem supports
                                                symbolic links.

   named_attr        7    bool         READ     True, if this object
                                                has named attributes.
                                                In other words, object
                                                has a non-empty named
                                                attribute directory.

   fsid              8    fsid4        READ     Unique filesystem
                                                identifier for the
                                                filesystem holding
                                                this object.  fsid
                                                contains major and
                                                minor components each
                                                of which are uint64.

   unique_handles    9    bool         READ
                                                True, if two distinct
                                                filehandles guaranteed
                                                to refer to two
                                                different filesystem
                                                objects.

   lease_time        10   nfs_lease4   READ     Duration of leases at
                                                server in seconds.

   rdattr_error      11   enum         READ     Error returned from
                                                getattr during
                                                readdir.

   filehandle        19   nfs_fh4      READ     The filehandle of this
                                                object (primarily for
                                                readdir requests).
















Expires: February 2003                                         [Page 39]


Draft Specification      NFS version 4 Protocol              August 2002


5.6.  Recommended Attributes - Definitions


 Name                #    Data Type      Access   Description
 ______________________________________________________________________
 ACL                 12   nfsace4<>      R/W      The access control
                                                  list for the object.

 aclsupport          13   uint32         READ     Indicates what types
                                                  of ACLs are supported
                                                  on the current
                                                  filesystem.

 archive             14   bool           R/W      True, if this file
                                                  has been archived
                                                  since the time of
                                                  last modification
                                                  (deprecated in favor
                                                  of time_backup).

 cansettime          15   bool           READ     True, if the server
                                                  able to change the
                                                  times for a
                                                  filesystem object as
                                                  specified in a
                                                  SETATTR operation.

 case_insensitive    16   bool           READ     True, if filename
                                                  comparisons on this
                                                  filesystem case
                                                  insensitive.

 case_preserving     17   bool           READ     True, if filename
                                                  case on this
                                                  filesystem preserved.

 chown_restricted    18   bool           READ     If TRUE, the server
                                                  will reject any
                                                  request to change
                                                  either the owner or
                                                  the group associated
                                                  with a file if the
                                                  caller is not a
                                                  privileged user (for
                                                  example, "root" in
                                                  UNIX operating
                                                  environments or in
                                                  Windows 2000 the
                                                  "Take Ownership"
                                                  privilege).




Expires: February 2003                                         [Page 40]


Draft Specification      NFS version 4 Protocol              August 2002


 fileid              20   uint64         READ     A number uniquely
                                                  identifying the file
                                                  within the
                                                  filesystem.

 files_avail         21   uint64         READ     File slots available
                                                  to this user on the
                                                  filesystem containing
                                                  this object - this
                                                  should be the
                                                  smallest relevant
                                                  limit.

 files_free          22   uint64         READ     Free file slots on
                                                  the filesystem
                                                  containing this
                                                  object - this should
                                                  be the smallest
                                                  relevant limit.

 files_total         23   uint64         READ     Total file slots on
                                                  the filesystem
                                                  containing this
                                                  object.

 fs_locations        24   fs_locations   READ     Locations where this
                                                  filesystem may be
                                                  found.  If the server
                                                  returns NFS4ERR_MOVED
                                                  as an error, this
                                                  attribute MUST be
                                                  supported.

 hidden              25   bool           R/W      True, if the file is
                                                  considered hidden
                                                  with respect to the
                                                  Windows API?

 homogeneous         26   bool           READ     True, if this
                                                  object's filesystem
                                                  is homogeneous, i.e.
                                                  are per filesystem
                                                  attributes the same
                                                  for all filesystem's
                                                  objects.

 maxfilesize         27   uint64         READ     Maximum supported
                                                  file size for the
                                                  filesystem of this
                                                  object.




Expires: February 2003                                         [Page 41]


Draft Specification      NFS version 4 Protocol              August 2002


 maxlink             28   uint32         READ     Maximum number of
                                                  links for this
                                                  object.

 maxname             29   uint32         READ     Maximum filename size
                                                  supported for this
                                                  object.

 maxread             30   uint64         READ     Maximum read size
                                                  supported for this
                                                  object.

 maxwrite            31   uint64         READ
                                                  Maximum write size
                                                  supported for this
                                                  object.  This
                                                  attribute SHOULD be
                                                  supported if the file
                                                  is writable.  Lack of
                                                  this attribute can
                                                  lead to the client
                                                  either wasting
                                                  bandwidth or not
                                                  receiving the best
                                                  performance.

 mimetype            32   utf8<>         R/W      MIME body
                                                  type/subtype of this
                                                  object.

 mode                33   mode4          R/W      UNIX-style mode and
                                                  permission bits for
                                                  this object.

 no_trunc            34   bool           READ     True, if a name
                                                  longer than name_max
                                                  is used, an error be
                                                  returned and name is
                                                  not truncated.

 numlinks            35   uint32         READ     Number of hard links
                                                  to this object.

 owner               36   utf8<>         R/W      The string name of
                                                  the owner of this
                                                  object.

 owner_group         37   utf8<>         R/W      The string name of
                                                  the group ownership
                                                  of this object.





Expires: February 2003                                         [Page 42]


Draft Specification      NFS version 4 Protocol              August 2002


 quota_avail_hard    38   uint64         READ     For definition see
                                                  "Quota Attributes"
                                                  section below.

 quota_avail_soft    39   uint64         READ     For definition see
                                                  "Quota Attributes"
                                                  section below.

 quota_used          40   uint64         READ     For definition see
                                                  "Quota Attributes"
                                                  section below.

 rawdev              41   specdata4      READ     Raw device
                                                  identifier.  UNIX
                                                  device major/minor
                                                  node information.  If
                                                  the value of type is
                                                  not NF4BLK or NF4CHR,
                                                  the value return
                                                  SHOULD NOT be
                                                  considered useful.

 space_avail         42   uint64         READ     Disk space in bytes
                                                  available to this
                                                  user on the
                                                  filesystem containing
                                                  this object - this
                                                  should be the
                                                  smallest relevant
                                                  limit.

 space_free          43   uint64         READ     Free disk space in
                                                  bytes on the
                                                  filesystem containing
                                                  this object - this
                                                  should be the
                                                  smallest relevant
                                                  limit.

 space_total         44   uint64         READ     Total disk space in
                                                  bytes on the
                                                  filesystem containing
                                                  this object.

 space_used          45   uint64         READ     Number of filesystem
                                                  bytes allocated to
                                                  this object.







Expires: February 2003                                         [Page 43]


Draft Specification      NFS version 4 Protocol              August 2002


 system              46   bool           R/W      True, if this file is
                                                  a "system" file with
                                                  respect to the
                                                  Windows API?

 time_access         47   nfstime4       READ     The time of last
                                                  access to the object
                                                  by a read that was
                                                  satisfied by the
                                                  server.

 time_access_set     48   settime4       WRITE    Set the time of last
                                                  access to the object.
                                                  SETATTR use only.

 time_backup         49   nfstime4       R/W      The time of last
                                                  backup of the object.

 time_create         50   nfstime4       R/W
                                                  The time of creation
                                                  of the object. This
                                                  attribute does not
                                                  have any relation to
                                                  the traditional UNIX
                                                  file attribute
                                                  "ctime" or "change
                                                  time".

 time_delta          51   nfstime4       READ     Smallest useful
                                                  server time
                                                  granularity.

 time_metadata       52   nfstime4       R/W      The time of last
                                                  meta-data
                                                  modification of the
                                                  object.

 time_modify         53   nfstime4       READ     The time of last
                                                  modification to the
                                                  object.

 time_modify_set     54   settime4       WRITE    Set the time of last
                                                  modification to the
                                                  object.  SETATTR use
                                                  only.

 mounted_on_fileid   55   uint64         READ     Like fileid, but if
                                                  the target filehandle
                                                  is the root of a
                                                  filesystem return the
                                                  fileid of the
                                                  underlying directory.



Expires: February 2003                                         [Page 44]


Draft Specification      NFS version 4 Protocol              August 2002


5.7.  Time Access

   As defined above, the time_access attribute represents the time of
   last access to the object by a read that was satisfied by the server.
   The notion of what is an "access" depends on server's operating
   environment and/or the server's filesystem semantics.  For example,
   for servers obeying POSIX semantics, time_access would be updated
   only by the READLINK, READ, and READDIR operations and not any of the
   operations that modify the content of the object. Of course, setting
   the corresponding time_access_set attribute is another way to modify
   the time_access attribute.

   Whenever the file object resides on a writeable filesystem, the
   server should make best efforts to record time_access into stable
   storage.  However, to mitigate the performance effects of doing so,
   and most especially whenever the server is satisifying the read of
   the object's content from its cache, the server MAY cache access time
   updates and lazily write them to stable storage.  It is also
   acceptable to give administrators of the server the option to disable
   time_access updates.


5.8.  Interpreting owner and owner_group

   The recommended attributes "owner" and "owner_group" (and also users
   and groups within the "acl" attribute) are represented in terms of a
   UTF-8 string.  To avoid a representation that is tied to a particular
   underlying implementation at the client or server, the use of the
   UTF-8 string has been chosen.  Note that section 6.1 of [RFC2624]
   provides additional rationale.  It is expected that the client and
   server will have their own local representation of owner and
   owner_group that is used for local storage or presentation to the end
   user.  Therefore, it is expected that when these attributes are
   transferred between the client and server that the local
   representation is translated to a syntax of the form
   "user@dns_domain".  This will allow for a client and server that do
   not use the same local representation the ability to translate to a
   common syntax that can be interpreted by both.

   Similarly, security principals may be represented in different ways
   by different security mechanisms.  Servers normally translate these
   representations into a common format, generally that used by local
   storage, to serve as a means of identifying the users corresponding
   to these security principals.  When these local identifiers are
   translated to the form of the owner attribute, associated with files
   created by such principals they identify, in a common format, the
   users associated with each corresponding set of security principals.

   The translation used to interpret owner and group strings is not
   specified as part of the protocol.  This allows various solutions to
   be employed.  For example, a local translation table may be consulted
   that maps between a numeric id to the user@dns_domain syntax.  A name


Expires: February 2003                                         [Page 45]


Draft Specification      NFS version 4 Protocol              August 2002


   service may also be used to accomplish the translation.  A server may
   provide a more general service, not limited by any particular
   translation (which would only translate a limited set of possible
   strings) by storing the owner and owner_group attributes in local
   storage without any translation or it may augment a translation
   method by storing the entire string for attributes for which no
   translation is available while using the local representation for
   those cases in which a translation is available.

   Servers that do not provide support for all possible values of the
   owner and owner_group attributes, should return an error
   (NFS4ERR_BADOWNER) when a string is presented that has no
   translation, as the value to be set for a SETATTR of the owner,
   owner_group, or acl attributes.  When a server does accept an owner
   or owner_group value as valid on a SETATTR (and similarly for the
   owner and group strings in an acl), it is promising to return that
   same string when a corresponding GETATTR is done.  Configuration
   changes and ill-constructed name translations (those that contain
   aliasing) may make that promise impossible to honor.  Servers should
   make appropriate efforts to avoid a situation in which these
   attributes have their values changed when no real change to ownership
   has occurred.

   The "dns_domain" portion of the owner string is meant to be a DNS
   domain name.  For example, user@ietf.org.  Servers should accept as
   valid a set of users for at least one domain.  A server may treat
   other domains as having no valid translations.  A more general
   service is provided when a server is capable of accepting users for
   multiple domains, or for all domains, subject to security
   constraints.

   In the case where there is no translation available to the client or
   server, the attribute value must be constructed without the "@".
   Therefore, the absence of the @ from the owner or owner_group
   attribute signifies that no translation was available at the sender
   and that the receiver of the attribute should not use that string as
   a basis for translation into its own internal format.  Even though
   the attribute value can not be translated, it may still be useful.
   In the case of a client, the attribute string may be used for local
   display of ownership.

   To provide a greater degree of compatibility with previous versions
   of NFS (i.e. v2 and v3), which identified users and groups by 32-bit
   unsigned uid's and gid's, owner and group strings that consist of
   decimal numeric values with no leading zeros can be given a special
   interpretation by clients and servers which choose to provide such
   support.  The receiver may treat such a user or group string as
   representing the same user as would be represented by a v2/v3 uid or
   gid having the corresponding numeric value.  A server is not
   obligated to accept such a string, but may return an NFS4ERR_BADOWNER
   instead.  To avoid this mechanism being used to subvert user and
   group translation, so that a client might pass all of the owners and


Expires: February 2003                                         [Page 46]


Draft Specification      NFS version 4 Protocol              August 2002


   groups in numeric form, a server SHOULD return an NFS4ERR_BADOWNER
   error when there is a valid translation for the user or owner
   designated in this way.  In that case, the client must use the
   appropriate name@domain string and not the special form for
   compatibility.

   The owner string "nobody" may be used to designate an anonymous user,
   which will be associated with a file created by a security principal
   that cannot be mapped through normal means to the owner attribute.


5.9.  Character Case Attributes

   With respect to the case_insensitive and case_preserving attributes,
   each UCS-4 character (which UTF-8 encodes) has a "long descriptive
   name" [RFC1345] which may or may not included the word "CAPITAL" or
   "SMALL".  The presence of SMALL or CAPITAL allows an NFS server to
   implement unambiguous and efficient table driven mappings for case
   insensitive comparisons, and non-case-preserving storage.  For
   general character handling and internationalization issues, see the
   section "Internationalization".


5.10.  Quota Attributes

   For the attributes related to filesystem quotas, the following
   definitions apply:

   quota_avail_soft
        The value in bytes which represents the amount of additional
        disk space that can be allocated to this file or directory
        before the user may reasonably be warned.  It is understood that
        this space may be consumed by allocations to other files or
        directories though there is a rule as to which other files or
        directories.


   quota_avail_hard
        The value in bytes which represent the amount of additional disk
        space beyond the current allocation that can be allocated to
        this file or directory before further allocations will be
        refused.  It is understood that this space may be consumed by
        allocations to other files or directories.


   quota_used
        The value in bytes which represent the amount of disc space used
        by this file or directory and possibly a number of other similar
        files or directories, where the set of "similar" meets at least
        the criterion that allocating space to any file or directory in
        the set will reduce the "quota_avail_hard" of every other file
        or directory in the set.


Expires: February 2003                                         [Page 47]


Draft Specification      NFS version 4 Protocol              August 2002


        Note that there may be a number of distinct but overlapping sets
        of files or directories for which a quota_used value is
        maintained. E.g. "all files with a given owner", "all files with
        a given group owner". etc.

        The server is at liberty to choose any of those sets but should
        do so in a repeatable way.  The rule may be configured per-
        filesystem or may be "choose the set with the smallest quota".


5.11.  Access Control Lists

   The NFS version 4 ACL attribute is an array of access control entries
   (ACE).  There are various access control entry types, as defined in
   the Section "ACE type".  The server is able to communicate which ACE
   types are supported by returning the appropriate value within the
   aclsupport attribute.  Each ACE covers one or more operations on a
   file or directory as described in the Section "ACE Access Mask".  It
   may also contain one or more flags that modify the semantics of the
   ACE as defined in the Section "ACE flag".

   The NFS ACE attribute is defined as follows:


        typedef uint32_t        acetype4;
        typedef uint32_t        aceflag4;
        typedef uint32_t        acemask4;

        struct nfsace4 {
                acetype4        type;
                aceflag4        flag;
                acemask4        access_mask;
                utf8string      who;
        };


   To determine if a request succeeds, each nfsace4 entry is processed
   in order by the server.  Only ACEs which have a "who" that matches
   the requester are considered.  Each ACE is processed until all of the
   bits of the requester's access have been ALLOWED.  Once a bit (see
   below) has been ALLOWED by an ACCESS_ALLOWED_ACE, it is no longer
   considered in the processing of later ACEs. If an ACCESS_DENIED_ACE
   is encountered where the requester's access still has unALLOWED bits
   in common with the "access_mask" of the ACE, the request is denied.
   However, unlike the ALLOWED and DENIED ACE types, the ALARM and AUDIT
   ACE types do not affect a requestor's access, and instead are for
   triggering events as a result of a requestor's access attempt.
   Therefore, all AUDIT and ALARM ACEs are processed until end of the
   ACL.

   The NFS version 4 ACL model is quite rich.  Some server platforms may
   provide access control functionality that goes beyond the UNIX-style


Expires: February 2003                                         [Page 48]


Draft Specification      NFS version 4 Protocol              August 2002


   mode attribute, but which is not as rich as the NFS ACL model.  So
   that users can take advantage of this more limited functionality, the
   server may indicate that it supports ACLs as long as it follows the
   guidelines for mapping between its ACL model and the NFS version 4
   ACL model.

   The situation is complicated by the fact that a server may have
   multiple modules that enforce ACLs.  For example, the enforcement for
   NFS version 4 access may be different from the enforcement for local
   access, and both may be different from the enforcement for access
   through other protocols such as SMB.  So it may be useful for a
   server to accept an ACL even if not all of its modules are able to
   support it.

   The guiding principle in all cases is that the server must not accept
   ACLs that appear to make the file more secure than it really is.


5.11.1.  ACE type


   Type         Description
   _____________________________________________________
   ALLOW        Explicitly grants the access defined in
                acemask4 to the file or directory.

   DENY         Explicitly denies the access defined in
                acemask4 to the file or directory.

   AUDIT        LOG (system dependent) any access
                attempt to a file or directory which
                uses any of the access methods specified
                in acemask4.

   ALARM        Generate a system ALARM (system
                dependent) when any access attempt is
                made to a file or directory for the
                access methods specified in acemask4.


   A server need not support all of the above ACE types.  The bitmask
   constants used to represent the above definitions within the
   aclsupport attribute are as follows:


        const ACL4_SUPPORT_ALLOW_ACL    = 0x00000001;
        const ACL4_SUPPORT_DENY_ACL     = 0x00000002;
        const ACL4_SUPPORT_AUDIT_ACL    = 0x00000004;
        const ACL4_SUPPORT_ALARM_ACL    = 0x00000008;


   The semantics of the "type" field follow the descriptions provided


Expires: February 2003                                         [Page 49]


Draft Specification      NFS version 4 Protocol              August 2002


   above.

   The constants used for the type field (acetype4) are as follows:


        const ACE4_ACCESS_ALLOWED_ACE_TYPE      = 0x00000000;
        const ACE4_ACCESS_DENIED_ACE_TYPE       = 0x00000001;
        const ACE4_SYSTEM_AUDIT_ACE_TYPE        = 0x00000002;
        const ACE4_SYSTEM_ALARM_ACE_TYPE        = 0x00000003;


   Clients should not attempt to set an ACE unless the server claims
   support for that ACE type.  If the server receives a request to set
   an ACE that it cannot store, it must reject the request with
   NFS4ERR_ATTRNOTSUPP.

   If the server receives a request to set an ACE that it can store but
   cannot enforce, the server SHOULD reject the request.

   Example: suppose a server can enforce NFS ACLs for NFS access but
   cannot enforce ACLs for local access.  If arbitrary processes can run
   on the server, then the server SHOULD NOT indicate ACL support.  On
   the other hand, if only trusted administrative programs run locally,
   then the server may indicate ACL support.


5.11.2.  ACE Access Mask

   The access_mask field contains values based on the following:


   Access                 Description
   _______________________________________________________________
   READ_DATA              Permission to read the data of the file
   LIST_DIRECTORY         Permission to list the contents of a
                          directory
   WRITE_DATA             Permission to modify the file's data
   ADD_FILE               Permission to add a new file to a
                          directory
   APPEND_DATA            Permission to append data to a file
   ADD_SUBDIRECTORY       Permission to create a subdirectory to a
                          directory
   READ_NAMED_ATTRS       Permission to read the named attributes
                          of a file
   WRITE_NAMED_ATTRS      Permission to write the named attributes
                          of a file
   EXECUTE                Permission to execute a file
   DELETE_CHILD           Permission to delete a file or directory
                          within a directory
   READ_ATTRIBUTES        The ability to read basic attributes
                          (non-acls) of a file



Expires: February 2003                                         [Page 50]


Draft Specification      NFS version 4 Protocol              August 2002


   WRITE_ATTRIBUTES       Permission to change basic attributes
                          (non-acls) of a file

   DELETE                 Permission to Delete the file
   READ_ACL               Permission to Read the ACL
   WRITE_ACL              Permission to Write the ACL
   WRITE_OWNER            Permission to change the owner
   SYNCHRONIZE            Permission to access file locally at the
                          server with synchronous reads and writes


   The bitmask constants used for the access mask field are as follows:

   const ACE4_READ_DATA            = 0x00000001;
   const ACE4_LIST_DIRECTORY       = 0x00000001;
   const ACE4_WRITE_DATA           = 0x00000002;
   const ACE4_ADD_FILE             = 0x00000002;
   const ACE4_APPEND_DATA          = 0x00000004;
   const ACE4_ADD_SUBDIRECTORY     = 0x00000004;
   const ACE4_READ_NAMED_ATTRS     = 0x00000008;
   const ACE4_WRITE_NAMED_ATTRS    = 0x00000010;
   const ACE4_EXECUTE              = 0x00000020;
   const ACE4_DELETE_CHILD         = 0x00000040;
   const ACE4_READ_ATTRIBUTES      = 0x00000080;
   const ACE4_WRITE_ATTRIBUTES     = 0x00000100;
   const ACE4_DELETE               = 0x00010000;
   const ACE4_READ_ACL             = 0x00020000;
   const ACE4_WRITE_ACL            = 0x00040000;
   const ACE4_WRITE_OWNER          = 0x00080000;
   const ACE4_SYNCHRONIZE          = 0x00100000;

   Server implementations need not provide the granularity of control
   that is implied by this list of masks.  For example, POSIX-based
   systems might not distinguish APPEND_DATA (the ability to append to a
   file) from WRITE_DATA (the ability to modify existing contents); both
   masks would be tied to a single ``write'' permission.  When such a
   server returns attributes to the client, it would show both
   APPEND_DATA and WRITE_DATA if and only if the write permission is
   enabled.

   If a server receives a SETATTR request that it cannot accurately
   implement, it should error in the direction of more restricted
   access.  For example, suppose a server cannot distinguish overwriting
   data from appending new data, as described in the previous paragraph.
   If a client submits an ACE where APPEND_DATA is set but WRITE_DATA is
   not (or vice versa), the server should reject the request with
   NFS4ERR_ATTRNOTSUPP.  Nonetheless, if the ACE has type DENY, the
   server may silently turn on the other bit, so that both APPEND_DATA
   and WRITE_DATA are denied.





Expires: February 2003                                         [Page 51]


Draft Specification      NFS version 4 Protocol              August 2002


5.11.3.  ACE flag

   The "flag" field contains values based on the following descriptions.


   ACE4_FILE_INHERIT_ACE

   Can be placed on a directory and indicates that this ACE should be
   added to each new non-directory file created.


   ACE4_DIRECTORY_INHERIT_ACE

   Can be placed on a directory and indicates that this ACE should be
   added to each new directory created.


   ACE4_INHERIT_ONLY_ACE

   Can be placed on a directory but does not apply to the directory,
   only to newly created files/directories as specified by the above two
   flags.


   ACE4_NO_PROPAGATE_INHERIT_ACE

   Can be placed on a directory. Normally when a new directory is
   created and an ACE exists on the parent directory which is marked
   ACL4_DIRECTORY_INHERIT_ACE, two ACEs are placed on the new directory.
   One for the directory itself and one which is an inheritable ACE for
   newly created directories.  This flag tells the server to not place
   an ACE on the newly created directory which is inheritable by
   subdirectories of the created directory.


   ACE4_SUCCESSFUL_ACCESS_ACE_FLAG

   ACL4_FAILED_ACCESS_ACE_FLAG

   The ACE4_SUCCESSFUL_ACCESS_ACE_FLAG (SUCCESS) and
   ACE4_FAILED_ACCESS_ACE_FLAG (FAILED) flag bits relate only to
   ACE4_SYSTEM_AUDIT_ACE_TYPE (AUDIT) and ACE4_SYSTEM_ALARM_ACE_TYPE
   (ALARM) ACE types. If during the processing of the file's ACL, the
   server encounters an AUDIT or ALARM ACE that matches the principal
   attempting the OPEN, the server notes that fact, and the prescence,
   if any, of the SUCCESS and FAILED flags encountered in the AUDIT or
   ALARM ACE. Once the server completes the ACL processing, and the
   share reservation processing, and the OPEN call, it then notes if the
   OPEN succeeded or failed. If the OPEN succeeded, and if the SUCCESS
   flag was set for a matching AUDIT or ALARM, then the appropriate
   AUDIT or ALARM event occurs. If the OPEN failed, and if the FAILED
   flag was set for the matching AUDIT or ALARM, then the appropriate


Expires: February 2003                                         [Page 52]


Draft Specification      NFS version 4 Protocol              August 2002


   AUDIT or ALARM event occurs.  Clearly either or both of the SUCCESS
   or FAILED can be set, but if neither is set, the AUDIT or ALARM ACE
   is not useful.

   The previously described processing applies to that of the ACCESS
   operation as well.  The difference being that "success" or "failure"
   does not mean whether ACCESS returns NFS4_OK or not.  Success means
   whether ACCESS returns all requested and supported bits.  Failure
   means whether ACCESS failed to return a bit that was requested and
   supported.


   ACE4_IDENTIFIER_GROUP

   Indicates that the "who" refers to a GROUP as defined under UNIX.



   The bitmask constants used for the flag field are as follows:

   const ACE4_FILE_INHERIT_ACE             = 0x00000001;
   const ACE4_DIRECTORY_INHERIT_ACE        = 0x00000002;
   const ACE4_NO_PROPAGATE_INHERIT_ACE     = 0x00000004;
   const ACE4_INHERIT_ONLY_ACE             = 0x00000008;
   const ACE4_SUCCESSFUL_ACCESS_ACE_FLAG   = 0x00000010;
   const ACE4_FAILED_ACCESS_ACE_FLAG       = 0x00000020;
   const ACE4_IDENTIFIER_GROUP             = 0x00000040;

   A server need not support any of these flags.  If the server supports
   flags that are similar to, but not exactly the same as, these flags,
   the implementation may define a mapping between the protocol-defined
   flags and the implementation-defined flags.  Again, the guiding
   principle is that the file not appear to be more secure than it
   really is.

   For example, suppose a client tries to set an ACE with
   ACE4_FILE_INHERIT_ACE set but not ACE4_DIRECTORY_INHERIT_ACE.  If the
   server does not support any form of ACL inheritance, the server
   should reject the request with NFS4ERR_ATTRNOTSUPP.  If the server
   supports a single "inherit ACE" flag that applies to both files and
   directories, the server may reject the request (i.e., requiring the
   client to set both the file and directory inheritance flags).  The
   server may also accept the request and silently turn on the
   ACE4_DIRECTORY_INHERIT_ACE flag.


5.11.4.  ACE who

   There are several special identifiers ("who") which need to be
   understood universally, rather than in the context of a particular
   DNS domain. Some of these identifiers cannot be understood when an
   NFS client accesses the server, but have meaning when a local process


Expires: February 2003                                         [Page 53]


Draft Specification      NFS version 4 Protocol              August 2002


   accesses the file. The ability to display and modify these
   permissions is permitted over NFS, even if none of the access methods
   on the server understands the identifiers.


   Who                    Description
   _______________________________________________________________
   "OWNER"                The owner of the file.
   "GROUP"                The group associated with the file.
   "EVERYONE"             The world.
   "INTERACTIVE"          Accessed from an interactive terminal.
   "NETWORK"              Accessed via the network.
   "DIALUP"               Accessed as a dialup user to the server.
   "BATCH"                Accessed from a batch job.
   "ANONYMOUS"            Accessed without any authentication.
   "AUTHENTICATED"        Any authenticated user (opposite of
                          ANONYMOUS)
   "SERVICE"              Access from a system service.

   To avoid conflict, these special identifiers are distinguish by an
   appended "@" and should appear in the form "xxxx@" (note: no domain
   name after the "@").  For example: ANONYMOUS@.


5.11.5.  Mode Attribute

   The NFS version 4 mode attribute is based on the UNIX mode bits. The
   following bits are defined:


        const MODE4_SUID = 0x800;  /* set user id on execution */
        const MODE4_SGID = 0x400;  /* set group id on execution */
        const MODE4_SVTX = 0x200;  /* save text even after use */
        const MODE4_RUSR = 0x100;  /* read permission: owner */
        const MODE4_WUSR = 0x080;  /* write permission: owner */
        const MODE4_XUSR = 0x040;  /* execute permission: owner */
        const MODE4_RGRP = 0x020;  /* read permission: group */
        const MODE4_WGRP = 0x010;  /* write permission: group */
        const MODE4_XGRP = 0x008;  /* execute permission: group */
        const MODE4_ROTH = 0x004;  /* read permission: other */
        const MODE4_WOTH = 0x002;  /* write permission: other */
        const MODE4_XOTH = 0x001;  /* execute permission: other */


   Bits MODE4_RUSR, MODE4_WUSR, and MODE4_XUSR apply to the principal
   identified in the owner attribute.  Bits MODE4_RGRP, MODE4_WGRP, and
   MODE4_XGRP apply to the principals identified in the owner_group
   attribute.  Bits MODE4_ROTH, MODE4_WOTH, MODE4_XOTH apply to any
   principal that does not match that in the owner group, and does not
   have a group matching that of the owner_group attribute.

   The remaining bits are not defined by this protocol and MUST NOT be


Expires: February 2003                                         [Page 54]


Draft Specification      NFS version 4 Protocol              August 2002


   used.  The minor version mechanism must be used to define further bit
   usage.

   Note that in UNIX, if a file has the MODE4_SGID bit set and no
   MODE4_XGRP bit set, then READ and WRITE must use mandatory file
   locking.

5.11.6.  Mode and ACL Attribute

   The server that supports both mode and ACL must take care to
   synchronize the MODE4_*USR, MODE4_*GRP, and MODE4_*OTH bits with the
   ACEs which have respective who fields of "OWNER@", "GROUP@", and
   "EVERYONE@" so that the client can see semantically equivalent access
   permissions exist whether the client asks for owner, owner_group and
   mode attributes, or for just the ACL.

   Because the mode attribute includes bits (e.g. MODE4_SVTX) that have
   nothing to do with ACL semantics, it is permitted for clients to
   specify both the ACL attribute and mode in the same SETATTR
   operation. However, because there is no prescribed order for
   processing the attributes in a SETATTR, the client must ensure that
   ACL attribute, if specified without mode, would produce the desired
   mode bits, and conversely, the mode attribute if specified without
   ACL, would produce the desired "OWNER@", "GROUP@", and "EVERYONE@"
   ACEs.


5.11.7.  mounted_on_fileid

   UNIX-based operating environments connect a filesystem into the
   namespace by connecting (mounting) the filesystem onto the existing
   file object (the mount point, usually a directory) of an existing
   filesystem. When the mount point's parent directory is read via an
   API like readdir(), the return results are directory entries, each
   with a component name and a fileid. The fileid of the mount point's
   directory entry will be different from the fileid that the stat()
   system call returns. The stat() system call is returning the fileid
   of the root of the mounted filesystem, whereas readdir() is returning
   the fileid stat() would have returned before any filesystems were
   mounted on the mount point.

   Unlike NFS version 3, NFS version 4 allows a client's LOOKUP request
   to cross other filesystems. The client detects the filesystem
   crossing whenever the filehandle argument of LOOKUP has an fsid
   attribute different from that of the filehandle returned by LOOKUP. A
   UNIX-based client will consider this a "mount point crossing".  UNIX
   has a legacy scheme for allowing a process to determine its current
   working directory. This relies on readdir() of a mount point's parent
   and stat() of the mount point returning fileids as previously
   described.  The mounted_on_fileid attribute corresponds to the fileid
   that readdir() would have returned as described previously.



Expires: February 2003                                         [Page 55]


Draft Specification      NFS version 4 Protocol              August 2002


   While the NFS version 4 client could simply fabricate a fileid
   corresponding to what mounted_on_fileid provides (and if the server
   does not support mounted_on_fileid, the client has no choice), there
   is a risk that the client will generate a fileid that conflicts with
   one that is already assigned to another object in the filesystem.
   Instead, if the server can provide the mounted_on_fileid, the
   potential for client operational problems in this area is eliminated.

   If the server detects that there is no mounted point at the target
   file object, then the value for mounted_on_fileid that it returns is
   the same as that of the fileid attribute.

   The mounted_on_fileid attribute is RECOMMENDED, so the server SHOULD
   provide it if possible, and for a UNIX-based server, this is
   straightforward. Usually, mounted_on_fileid will be requested during
   a READDIR operation, in which case it is trivial (at least for UNIX-
   based servers) to return mounted_on_fileid since it is equal to the
   fileid of a directory entry returned by readdir().  If
   mounted_on_fileid is requested in a GETATTR operation, the server
   should obey an invariant that has it returning a value that is equal
   to the file object's entry in the object's parent directory, i.e.
   what readdir() would have returned.  Some operating environments
   allow a series of two or more filesystems to be mounted onto a single
   mount point. In this case, for the server to obey the aforementioned
   invariant, it will need to find the base mount point, and not the
   intermediate mount points.




























Expires: February 2003                                         [Page 56]


Draft Specification      NFS version 4 Protocol              August 2002


6.  Filesystem Migration and Replication

   With the use of the recommended attribute "fs_locations", the NFS
   version 4 server has a method of providing filesystem migration or
   replication services.  For the purposes of migration and replication,
   a filesystem will be defined as all files that share a given fsid
   (both major and minor values are the same).

   The fs_locations attribute provides a list of filesystem locations.
   These locations are specified by providing the server name (either
   DNS domain or IP address) and the path name representing the root of
   the filesystem.  Depending on the type of service being provided, the
   list will provide a new location or a set of alternate locations for
   the filesystem.  The client will use this information to redirect its
   requests to the new server.


6.1.  Replication

   It is expected that filesystem replication will be used in the case
   of read-only data.  Typically, the filesystem will be replicated on
   two or more servers.  The fs_locations attribute will provide the
   list of these locations to the client.  On first access of the
   filesystem, the client should obtain the value of the fs_locations
   attribute.  If, in the future, the client finds the server
   unresponsive, the client may attempt to use another server specified
   by fs_locations.

   If applicable, the client must take the appropriate steps to recover
   valid filehandles from the new server.  This is described in more
   detail in the following sections.


6.2.  Migration

   Filesystem migration is used to move a filesystem from one server to
   another.  Migration is typically used for a filesystem that is
   writable and has a single copy.  The expected use of migration is for
   load balancing or general resource reallocation.  The protocol does
   not specify how the filesystem will be moved between servers.  This
   server-to-server transfer mechanism is left to the server
   implementor.  However, the method used to communicate the migration
   event between client and server is specified here.

   Once the servers participating in the migration have completed the
   move of the filesystem, the error NFS4ERR_MOVED will be returned for
   subsequent requests received by the original server.  The
   NFS4ERR_MOVED error is returned for all operations except PUTFH and
   GETATTR.  Upon receiving the NFS4ERR_MOVED error, the client will
   obtain the value of the fs_locations attribute.  The client will then
   use the contents of the attribute to redirect its requests to the
   specified server.  To facilitate the use of GETATTR, operations such


Expires: February 2003                                         [Page 57]


Draft Specification      NFS version 4 Protocol              August 2002


   as PUTFH must also be accepted by the server for the migrated file
   system's filehandles.  Note that if the server returns NFS4ERR_MOVED,
   the server MUST support the fs_locations attribute.

   If the client requests more attributes than just fs_locations, the
   server may return fs_locations only.  This is to be expected since
   the server has migrated the filesystem and may not have a method of
   obtaining additional attribute data.

   The server implementor needs to be careful in developing a migration
   solution.  The server must consider all of the state information
   clients may have outstanding at the server.  This includes but is not
   limited to locking/share state, delegation state, and asynchronous
   file writes which are represented by WRITE and COMMIT verifiers.  The
   server should strive to minimize the impact on its clients during and
   after the migration process.


6.3.  Interpretation of the fs_locations Attribute

   The fs_location attribute is structured in the following way:

   struct fs_location {
           utf8string      server<>;
           pathname4       rootpath;
   };

   struct fs_locations {
           pathname4       fs_root;
           fs_location     locations<>;
   };

   The fs_location struct is used to represent the location of a
   filesystem by providing a server name and the path to the root of the
   filesystem.  For a multi-homed server or a set of servers that use
   the same rootpath, an array of server names may be provided.  An
   entry in the server array is an UTF8 string and represents one of a
   traditional DNS host name, IPv4 address, or IPv6 address.  It is not
   a requirement that all servers that share the same rootpath be listed
   in one fs_location struct.  The array of server names is provided for
   convenience.  Servers that share the same rootpath may also be listed
   in separate fs_location entries in the fs_locations attribute.

   The fs_locations struct and attribute then contains an array of
   locations.  Since the name space of each server may be constructed
   differently, the "fs_root" field is provided.  The path represented
   by fs_root represents the location of the filesystem in the server's
   name space.  Therefore, the fs_root path is only associated with the
   server from which the fs_locations attribute was obtained.  The
   fs_root path is meant to aid the client in locating the filesystem at
   the various servers listed.



Expires: February 2003                                         [Page 58]


Draft Specification      NFS version 4 Protocol              August 2002


   As an example, there is a replicated filesystem located at two
   servers (servA and servB).  At servA the filesystem is located at
   path "/a/b/c".  At servB the filesystem is located at path "/x/y/z".
   In this example the client accesses the filesystem first at servA
   with a multi-component lookup path of "/a/b/c/d".  Since the client
   used a multi-component lookup to obtain the filehandle at "/a/b/c/d",
   it is unaware that the filesystem's root is located in servA's name
   space at "/a/b/c".  When the client switches to servB, it will need
   to determine that the directory it first referenced at servA is now
   represented by the path "/x/y/z/d" on servB.  To facilitate this, the
   fs_locations attribute provided by servA would have a fs_root value
   of "/a/b/c" and two entries in fs_location.  One entry in fs_location
   will be for itself (servA) and the other will be for servB with a
   path of "/x/y/z".  With this information, the client is able to
   substitute "/x/y/z" for the "/a/b/c" at the beginning of its access
   path and construct "/x/y/z/d" to use for the new server.

   See the section "Security Considerations" for a discussion on the
   recommendations for the security flavor to be used by any GETATTR
   operation that requests the "fs_locations" attribute.


6.4.  Filehandle Recovery for Migration or Replication

   Filehandles for filesystems that are replicated or migrated generally
   have the same semantics as for filesystems that are not replicated or
   migrated.  For example, if a filesystem has persistent filehandles
   and it is migrated to another server, the filehandle values for the
   filesystem will be valid at the new server.

   For volatile filehandles, the servers involved likely do not have a
   mechanism to transfer filehandle format and content between
   themselves.  Therefore, a server may have difficulty in determining
   if a volatile filehandle from an old server should return an error of
   NFS4ERR_FHEXPIRED.  Therefore, the client is informed, with the use
   of the fh_expire_type attribute, whether volatile filehandles will
   expire at the migration or replication event.  If the bit
   FH4_VOL_MIGRATION is set in the fh_expire_type attribute, the client
   must treat the volatile filehandle as if the server had returned the
   NFS4ERR_FHEXPIRED error.  At the migration or replication event in
   the presence of the FH4_VOL_MIGRATION bit, the client will not
   present the original or old volatile filehandle to the new server.
   The client will start its communication with the new server by
   recovering its filehandles using the saved file names.










Expires: February 2003                                         [Page 59]


Draft Specification      NFS version 4 Protocol              August 2002


7.  NFS Server Name Space


7.1.  Server Exports

   On a UNIX server the name space describes all the files reachable by
   pathnames under the root directory or "/".  On a Windows NT server
   the name space constitutes all the files on disks named by mapped
   disk letters.  NFS server administrators rarely make the entire
   server's filesystem name space available to NFS clients.  More often
   portions of the name space are made available via an "export"
   feature.  In previous versions of the NFS protocol, the root
   filehandle for each export is obtained through the MOUNT protocol;
   the client sends a string that identifies the export of name space
   and the server returns the root filehandle for it.  The MOUNT
   protocol supports an EXPORTS procedure that will enumerate the
   server's exports.


7.2.  Browsing Exports

   The NFS version 4 protocol provides a root filehandle that clients
   can use to obtain filehandles for these exports via a multi-component
   LOOKUP.  A common user experience is to use a graphical user
   interface (perhaps a file "Open" dialog window) to find a file via
   progressive browsing through a directory tree.  The client must be
   able to move from one export to another export via single-component,
   progressive LOOKUP operations.

   This style of browsing is not well supported by the NFS version 2 and
   3 protocols.  The client expects all LOOKUP operations to remain
   within a single server filesystem.  For example, the device attribute
   will not change.  This prevents a client from taking name space paths
   that span exports.

   An automounter on the client can obtain a snapshot of the server's
   name space using the EXPORTS procedure of the MOUNT protocol.  If it
   understands the server's pathname syntax, it can create an image of
   the server's name space on the client.  The parts of the name space
   that are not exported by the server are filled in with a "pseudo
   filesystem" that allows the user to browse from one mounted
   filesystem to another.  There is a drawback to this representation of
   the server's name space on the client: it is static.  If the server
   administrator adds a new export the client will be unaware of it.


7.3.  Server Pseudo Filesystem

   NFS version 4 servers avoid this name space inconsistency by
   presenting all the exports within the framework of a single server
   name space.  An NFS version 4 client uses LOOKUP and READDIR
   operations to browse seamlessly from one export to another.  Portions


Expires: February 2003                                         [Page 60]


Draft Specification      NFS version 4 Protocol              August 2002


   of the server name space that are not exported are bridged via a
   "pseudo filesystem" that provides a view of exported directories
   only.  A pseudo filesystem has a unique fsid and behaves like a
   normal, read only filesystem.

   Based on the construction of the server's name space, it is possible
   that multiple pseudo filesystems may exist.  For example,

   /a         pseudo filesystem
   /a/b       real filesystem
   /a/b/c     pseudo filesystem
   /a/b/c/d   real filesystem

   Each of the pseudo filesystems are considered separate entities and
   therefore will have a unique fsid.


7.4.  Multiple Roots

   The DOS and Windows operating environments are sometimes described as
   having "multiple roots".  filesystems are commonly represented as
   disk letters.  MacOS represents filesystems as top level names.  NFS
   version 4 servers for these platforms can construct a pseudo file
   system above these root names so that disk letters or volume names
   are simply directory names in the pseudo root.


7.5.  Filehandle Volatility

   The nature of the server's pseudo filesystem is that it is a logical
   representation of filesystem(s) available from the server.
   Therefore, the pseudo filesystem is most likely constructed
   dynamically when the server is first instantiated.  It is expected
   that the pseudo filesystem may not have an on disk counterpart from
   which persistent filehandles could be constructed.  Even though it is
   preferable that the server provide persistent filehandles for the
   pseudo filesystem, the NFS client should expect that pseudo file
   system filehandles are volatile.  This can be confirmed by checking
   the associated "fh_expire_type" attribute for those filehandles in
   question.  If the filehandles are volatile, the NFS client must be
   prepared to recover a filehandle value (e.g. with a multi-component
   LOOKUP) when receiving an error of NFS4ERR_FHEXPIRED.


7.6.  Exported Root

   If the server's root filesystem is exported, one might conclude that
   a pseudo-filesystem is not needed.  This would be wrong.  Assume the
   following filesystems on a server:

           /       disk1  (exported)
           /a      disk2  (not exported)


Expires: February 2003                                         [Page 61]


Draft Specification      NFS version 4 Protocol              August 2002


           /a/b    disk3  (exported)

   Because disk2 is not exported, disk3 cannot be reached with simple
   LOOKUPs.  The server must bridge the gap with a pseudo-filesystem.


7.7.  Mount Point Crossing

   The server filesystem environment may be constructed in such a way
   that one filesystem contains a directory which is 'covered' or
   mounted upon by a second filesystem.  For example:

           /a/b            (filesystem 1)
           /a/b/c/d        (filesystem 2)

   The pseudo filesystem for this server may be constructed to look
   like:

           /               (place holder/not exported)
           /a/b            (filesystem 1)
           /a/b/c/d        (filesystem 2)

   It is the server's responsibility to present the pseudo filesystem
   that is complete to the client.  If the client sends a lookup request
   for the path "/a/b/c/d", the server's response is the filehandle of
   the filesystem "/a/b/c/d".  In previous versions of the NFS protocol,
   the server would respond with the filehandle of directory "/a/b/c/d"
   within the filesystem "/a/b".

   The NFS client will be able to determine if it crosses a server mount
   point by a change in the value of the "fsid" attribute.


7.8.  Security Policy and Name Space Presentation

   The application of the server's security policy needs to be carefully
   considered by the implementor.  One may choose to limit the
   viewability of portions of the pseudo filesystem based on the
   server's perception of the client's ability to authenticate itself
   properly.  However, with the support of multiple security mechanisms
   and the ability to negotiate the appropriate use of these mechanisms,
   the server is unable to properly determine if a client will be able
   to authenticate itself.  If, based on its policies, the server
   chooses to limit the contents of the pseudo filesystem, the server
   may effectively hide filesystems from a client that may otherwise
   have legitimate access.

   As suggested practice, the server should apply the security policy of
   a shared resource in the server's namespace to the ancestors
   components of the namespace.  For example:

           /


Expires: February 2003                                         [Page 62]


Draft Specification      NFS version 4 Protocol              August 2002


           /a/b
           /a/b/c
   The /a/b/c directory is a real filesystem and is the shared resource.
   The security policy for /a/b/c is Kerberos with integrity.  The
   server should should apply the same security policy to /, /a, and
   /a/b.  This allows for the extension of the protection of the
   server's namespace to the ancestors of the real shared resource.

   For the case of the use of multiple, disjoint security mechanisms in
   the server's resources, the security for a particular object in the
   server's namespace should be the union of all security mechanisms of
   all direct descendants.










































Expires: February 2003                                         [Page 63]


Draft Specification      NFS version 4 Protocol              August 2002


8.  File Locking and Share Reservations

   Integrating locking into the NFS protocol necessarily causes it to be
   stateful.  With the inclusion of share reservations the protocol
   becomes substantially more dependent on state than the traditional
   combination of NFS and NLM [XNFS].  There are three components to
   making this state manageable:

   o    Clear division between client and server

   o    Ability to reliably detect inconsistency in state between client
        and server

   o    Simple and robust recovery mechanisms

   In this model, the server owns the state information.  The client
   communicates its view of this state to the server as needed.  The
   client is also able to detect inconsistent state before modifying a
   file.

   To support Win32 share reservations it is necessary to atomically
   OPEN or CREATE files.  Having a separate share/unshare operation
   would not allow correct implementation of the Win32 OpenFile API.  In
   order to correctly implement share semantics, the previous NFS
   protocol mechanisms used when a file is opened or created (LOOKUP,
   CREATE, ACCESS) need to be replaced.  The NFS version 4 protocol has
   an OPEN operation that subsumes the NFS version 3 methodology of
   LOOKUP, CREATE, and ACCESS.  However, because many operations require
   a filehandle, the traditional LOOKUP is preserved to map a file name
   to filehandle without establishing state on the server.  The policy
   of granting access or modifying files is managed by the server based
   on the client's state.  These mechanisms can implement policy ranging
   from advisory only locking to full mandatory locking.


8.1.  Locking

   It is assumed that manipulating a lock is rare when compared to READ
   and WRITE operations.  It is also assumed that crashes and network
   partitions are relatively rare.  Therefore it is important that the
   READ and WRITE operations have a lightweight mechanism to indicate if
   they possess a held lock.  A lock request contains the heavyweight
   information required to establish a lock and uniquely define the lock
   owner.

   The following sections describe the transition from the heavy weight
   information to the eventual stateid used for most client and server
   locking and lease interactions.

8.1.1.  Client ID

   For each LOCK request, the client must identify itself to the server.


Expires: February 2003                                         [Page 64]


Draft Specification      NFS version 4 Protocol              August 2002


   This is done in such a way as to allow for correct lock
   identification and crash recovery.  A sequence of a SETCLIENTID
   operation followed by a SETCLIENTID_CONFIRM operation is required to
   establish the identification onto the server.  Establishment of
   identification by a new incarnation of the client also has the effect
   of immediately breaking any leased state that a previous incarnation
   of the client might have had on the server, as opposed to forcing the
   new client incarnation to wait for the leases to expire.  Breaking
   the lease state amounts to the server removing all lock, share
   reservation, and, where the server is not supporting the
   CLAIM_DELEGATE_PREV claim type, all delegation state associated with
   same client with the same identity. For discussion of delegation
   state recovery, see the section "Delegation Recovery".

   Client identification is encapsulated in the following structure:

           struct nfs_client_id4 {
                   verifier4     verifier;
                   opaque        id<NFS4_OPAQUE_LIMIT>;
           };

   The first field, verifier is a client incarnation verifier that is
   used to detect client reboots. Only if the verifier is different from
   that the server has previously recorded the client (as identified by
   the second field f the structure, id) does the server start the
   process of cancelling the client's leased state.

   The second field, id is a variable length string that uniquely
   defines the client.

   There are several considerations for how the client generates the id
   string:

   o    The string should be unique so that multiple clients do not
        present the same string. The consequences of two clients
        presenting the same string range from one client getting an
        error to one client having its leased state abruptly and
        unexpectedly cancelled.

   o    The string should be selected so the subsequent incarnations
        (e.g. reboots) of the same client cause the client to present
        the same string. The implementor is cautioned from an approach
        that requires the string to be recorded in a local file because
        this precludes the use of the implementation in an environment
        where there is no local disk and all file access is from an NFS
        version 4 server.

   o    The string should be different for each server network address
        that the client accesses, rather than common to all server
        network addresses. The reason is that it may not be possible for
        the client to tell if same server is listening on multiple
        network addresses. If the client issues SETCLIENTID with the


Expires: February 2003                                         [Page 65]


Draft Specification      NFS version 4 Protocol              August 2002


        same id string to each network address of such a server, the
        server will think it is the same client, and each successive
        SETCLIENTID will cause the server to begin the process of
        removing the client's previous leased state.

   o    The algorithm for generating the string should not assume that
        the client's network address won't change.  This includes
        changes between client incarnations and even changes while the
        client is stilling running in its current incarnation. This
        means that if the client includes just the client's and server's
        network address in the id string, there is a real risk, after
        the client gives up the network address, that another client,
        using a similar algorithm for generate the id string, will
        generating a conflicting id string.


   Given the above considerations, an example of a well generated id
   string is one that includes:

   o    The server's network address.

   o    The client's network address.

   o    For a user level NFS version 4 client, it should contain
        additional information to distinguish the client from other user
        level clients running on the same host, such as a process id or
        other unique sequence.

   o    Additional information that tends to be unique, such as one or
        more of:

        - The client machines serial number (for privacy reasons, it is
          best to perform some one way function on the serial number).

        - A MAC address.

        - The timestamp of when the NFS version 4 software was first
          installed on the client (though this is subject to the
          previously mentioned caution about using information that is
          stored in a file, because the file might only be accessible
          over NFS version 4).

        - A true random number. However since this number ought to be
          the same between client incarnations, this shares the same
          problem as that of the using the timestamp of the software
          installation.

   As a security measure, the server MUST NOT cancel a client's leased
   state if the principal established the state for a given id string is
   not the same as the principal issuing the SETCLIENTID.

   Note that SETCLIENTID and SETCLIENTID_CONFIRM has a secondary purpose


Expires: February 2003                                         [Page 66]


Draft Specification      NFS version 4 Protocol              August 2002


   of establishing the information the server needs to make callbacks to
   the client for purpose of supporting delegations. It is permitted to
   change this information via SETCLIENTID and SETCLIENTID_CONFIRM
   within the same incarnation of the client without removing the
   client's leased state.

   Once a SETCLIENTID and SETCLIENTID_CONFIRM sequence has successfully
   completed, the client uses the short hand client identifier, of type
   clientid4, instead of the longer and less compact nfs_client_id4
   structure.  This short hand client identfier (a clientid) is assigned
   by the server and should be chosen so that it will not conflict with
   a clientid previously assigned by the server.  This applies across
   server restarts or reboots.  When a clientid is presented to a server
   and that clientid is not recognized, as would happen after a server
   reboot, the server will reject the request with the error
   NFS4ERR_STALE_CLIENTID.  When this happens, the client must obtain a
   new clientid by use of the SETCLIENTID operation and then proceed to
   any other necessary recovery for the server reboot case (See the
   section "Server Failure and Recovery").

   The client must also employ the SETCLIENTID operation when it
   receives a NFS4ERR_STALE_STATEID error using a stateid derived from
   its current clientid, since this also indicates a server reboot which
   has invalidated the existing clientid (see the next section
   "lock_owner and stateid Definition" for details).

   See the detailed descriptions of SETCLIENTID and SETCLIENTID_CONFIRM
   for a complete specification of the operations.


8.1.2.  Server Release of Clientid

   If the server determines that the client holds no associated state
   for its clientid, the server may choose to release the clientid.  The
   server may make this choice for an inactive client so that resources
   are not consumed by those intermittently active clients.  If the
   client contacts the server after this release, the server must ensure
   the client receives the appropriate error so that it will use the
   SETCLIENTID/SETCLIENTID_CONFIRM sequence to establish a new identity.
   It should be clear that the server must be very hesitant to release a
   clientid since the resulting work on the client to recover from such
   an event will be the same burden as if the server had failed and
   restarted.  Typically a server would not release a clientid unless
   there had been no activity from that client for many minutes.

   Note that if the id string in a SETCLIENTID request is properly
   constructed, and if the client takes care to use the same principal
   for each successive use of SETCLIENTID, then, barring an active
   denial of service attack, NFS4ERR_CLID_INUSE should never be
   returned.

   However, client bugs, server bugs, or perhaps a deliberate change of


Expires: February 2003                                         [Page 67]


Draft Specification      NFS version 4 Protocol              August 2002


   the principal owner of the id string (such as the case of a client
   that changes security flavors, and under the new flavor, there is no
   mapping to the previous owner) will in rare cases result in
   NFS4ERR_CLID_INUSE.

   In that event, when the server gets a SETCLIENTID for a client id
   that currently has no state, or it has state, but the lease has
   expired, rather than returning NFS4ERR_CLID_INUSE, the server MUST
   allow the SETCLIENTID, and confirm the new clientid if followed by
   the appropriate SETCLIENTID_CONFIRM.


8.1.3.  lock_owner and stateid Definition

   When requesting a lock, the client must present to the server the
   clientid and an identifier for the owner of the requested lock.
   These two fields are referred to as the lock_owner and the definition
   of those fields are:

   o    A clientid returned by the server as part of the client's use of
        the SETCLIENTID operation.

   o    A variable length opaque array used to uniquely define the owner
        of a lock managed by the client.

        This may be a thread id, process id, or other unique value.


   When the server grants the lock, it responds with a unique stateid.
   The stateid is used as a shorthand reference to the lock_owner, since
   the server will be maintaining the correspondence between them.

   The server is free to form the stateid in any manner that it chooses
   as long as it is able to recognize invalid and out-of-date stateids.
   This requirement includes those stateids generated by earlier
   instances of the server.  From this, the client can be properly
   notified of a server restart.  This notification will occur when the
   client presents a stateid to the server from a previous
   instantiation.

   The server must be able to distinguish the following situations and
   return the error as specified:

   o    The stateid was generated by an earlier server instance (i.e.
        before a server reboot).  The error NFS4ERR_STALE_STATEID should
        be returned.

   o    The stateid was generated by the current server instance but the
        stateid no longer designates the current locking state for the
        lockowner-file pair in question (i.e. one or more locking
        operations has occurred).  The error NFS4ERR_OLD_STATEID should
        be returned.


Expires: February 2003                                         [Page 68]


Draft Specification      NFS version 4 Protocol              August 2002


        This error condition will only occur when the client issues a
        locking request which changes a stateid while an I/O request
        that uses that stateid is outstanding.

   o    The stateid was generated by the current server instance but the
        stateid does not designate a locking state for any active
        lockowner-file pair.  The error NFS4ERR_BAD_STATEID should be
        returned.

        This error condition will occur when there has been a logic
        error on the part of the client or server.  This should not
        happen.

   One mechanism that may be used to satisfy these requirements is for
   the server to,

   o    divide the "other" field of each stateid into two fields:

        - A server verifier which uniquely designates a particular
        server
          instantiation.

        - An index into a table of locking-state structures.

   o    utilize the "seqid" field of each stateid, such that seqid is
        monotonically incremented for each stateid that is associated
        with the same index into the locking-state table.

   By matching the incoming stateid and its field values with the state
   held at the server, the server is able to easily determine if a
   stateid is valid for its current instantiation and state.  If the
   stateid is not valid, the appropriate error can be supplied to the
   client.


8.1.4.  Use of the stateid and Locking

   All READ, WRITE and SETATTR operations contain a stateid.  For the
   purposes of this section, SETATTR operations which change the size
   attribute of a file are treated as if they are writing the area
   between the old and new size (i.e. the range truncated or added to
   the file by means of the SETATTR), even where SETATTR is not
   explicitly mentioned in the text.

   If the lock_owner performs a READ or WRITE in a situation in which it
   has established a lock or share reservation on the server (any OPEN
   constitutes a share reservation) the stateid (previously returned by
   the server) must be used to indicate what locks, including both
   record locks and share reservations, are held by the lockowner.  If
   no state is established by the client, either record lock or share
   reservation, a stateid of all bits 0 is used.  Regardless whether a
   stateid of all bits 0, or a stateid returned by the server is used,


Expires: February 2003                                         [Page 69]


Draft Specification      NFS version 4 Protocol              August 2002


   if there is a conflicting share reservation or mandatory record lock
   held on the file, the server MUST refuse to service the READ or WRITE
   operation.

   Share reservations are established by OPEN operations and by their
   nature are mandatory in that when the OPEN denies READ or WRITE
   operations, that denial results in such operations being rejected
   with error NFS4ERR_LOCKED.  Record locks may be implemented by the
   server as either mandatory or advisory, or the choice of mandatory or
   advisory behavior may be determined by the server on the basis of the
   file being accessed (for example, some UNIX-based servers support a
   "mandatory lock bit" on the mode attribute such that if set, record
   locks are required on the file before I/O is possible).  When record
   locks are advisory, they only prevent the granting of conflicting
   lock requests and have no effect on READ's or WRITE's.  Mandatory
   record locks, however, prevent conflicting I/O operations.  When they
   are attempted, they are rejected with NFS4ERR_LOCKED. Assuming an
   operating environment like UNIX that requires it, when the client
   gets NFS4ERR_LOCKED on a file it knows it has the proper share
   reservation for, it will need to issue a LOCK request on the region
   of the file that includes the region the I/O was to be performed on,
   with an appropriate locktype (i.e. READ*_LT for a READ operation,
   WRITE*_LT for a WRITE operation).

   With NFS version 3, there was no notion of a stateid so there was no
   way to tell if the application process of the client sending the READ
   or WRITE operation had also acquired the appropriate record lock on
   the file. Thus there was no way to implement mandatory locking. With
   the stateid construct, this barrier has been removed.

   Note that for UNIX environments that support mandatory file locking,
   the distinction between advisory and mandatory locking is subtle.  In
   fact, advisory and mandatory record locks are exactly the same in so
   far as the APIs and requirements on implementation. If the mandatory
   lock attribute is set on the file, the server checks to see if the
   lockowner has an appropriate shared (read) or exclusive (write)
   record lock on the region it wishes to read or write to. If there is
   no appropriate lock, the server checks if there is a conflicting lock
   (which can be done by attempting to acquire the conflicting lock on
   the behalf of the lockowner, and if successful, release the lock
   after the READ or WRITE is done), and if there is, the server returns
   NFS4ERR_LOCKED.

   For Windows environments, there are no advisory record locks, so the
   server always checks for record locks during I/O requests.

   Thus, the NFS version 4 LOCK operation does not need to distinguish
   between advisory and mandatory record locks. It is the NFS version 4
   server's processing of the READ and WRITE operations that introduces
   the distinction.

   Every stateid other than the special stateid values noted in this


Expires: February 2003                                         [Page 70]


Draft Specification      NFS version 4 Protocol              August 2002


   section, whether returned by an OPEN-type operation (i.e. OPEN,
   OPEN_DOWNGRADE), or by a LOCK-type operation (i.e. LOCK or LOCKU),
   defines an access mode for the file (i.e. READ, WRITE, or READ-WRITE)
   as established by the original OPEN which began the stateid sequence,
   and as modified by subsequent OPEN's and OPEN_DOWNGRADE's within that
   stateid sequence.  When a READ, WRITE, or SETATTR which specifies the
   size attribute, is done, the operation is subject to checking against
   the access mode to verify that the operation is appropriate given the
   OPEN with which the operation is associated.

   In the case of WRITE-type operations (i.e. WRITE's and SETATTR's
   which set size), the server must verify that the access mode allows
   writing and return an NFS4ERR_OPENMODE error if it does not.  In the
   case, of READ, the server may perform the corresponding check on the
   access mode, or it may choose to allow READ on opens for WRITE only,
   to accommodate clients whose write implementation may unavoidably do
   reads (e.g. due to buffer cache constraints).  However, even if
   READ's are allowed in these circumstances, the server MUST still
   check for locks that conflict with the READ (e.g. another open
   specify denial of READ's).  Note that a server which does enforce the
   access mode check on READ's need not explicitly check for conflicting
   share reservations since the existence of OPEN for read access
   guarantees that no conflicting share reservation can exist.

   A stateid of all bits 1 (one) MAY allow READ operations to bypass
   locking checks at the server.  However, WRITE operations with a
   stateid with bits all 1 (one) MUST NOT bypass locking checks and are
   treated exactly the same as if a stateid of all bits 0 were used.

   A lock may not be granted while a READ or WRITE operation using one
   of the special stateids is being performed and the range of the lock
   request conflicts with the range of the READ or WRITE operation.  For
   the purposes of this paragraph, a conflict occurs when a shared lock
   is requested and a WRITE operation is being performed, or an
   exclusive lock is requested and either a READ or a WRITE operation is
   being performed. A SETATTR that sets size is treated similarly to a
   WRITE as discussed above.


8.1.5.  Sequencing of Lock Requests

   Locking is different than most NFS operations as it requires "at-
   most-one" semantics that are not provided by ONCRPC.  ONCRPC over a
   reliable transport is not sufficient because a sequence of locking
   requests may span multiple TCP connections.  In the face of
   retransmission or reordering, lock or unlock requests must have a
   well defined and consistent behavior.  To accomplish this, each lock
   request contains a sequence number that is a consecutively increasing
   integer.  Different lock_owners have different sequences.  The server
   maintains the last sequence number (L) received and the response that
   was returned.  The first request issued for any given lock_owner is
   issued with a sequence number of zero.


Expires: February 2003                                         [Page 71]


Draft Specification      NFS version 4 Protocol              August 2002


   Note that for requests that contain a sequence number, for each
   lock_owner, there should be no more than one outstanding request.

   If a request (r) with a previous sequence number (r < L) is received,
   it is rejected with the return of error NFS4ERR_BAD_SEQID.  Given a
   properly-functioning client, the response to (r) must have been
   received before the last request (L) was sent.  If a duplicate of
   last request (r == L) is received, the stored response is returned.
   If a request beyond the next sequence (r == L + 2) is received, it is
   rejected with the return of error NFS4ERR_BAD_SEQID.  Sequence
   history is reinitialized whenever the SETCLIENTID/SETCLIENTID_CONFIRM
   sequence changes the client verifier.

   Since the sequence number is represented with an unsigned 32-bit
   integer, the arithmetic involved with the sequence number is mod
   2^32.

   It is critical the server maintain the last response sent to the
   client to provide a more reliable cache of duplicate non-idempotent
   requests than that of the traditional cache described in [Juszczak].
   The traditional duplicate request cache uses a least recently used
   algorithm for removing unneeded requests. However, the last lock
   request and response on a given lock_owner must be cached as long as
   the lock state exists on the server.

   The client MUST monotonically increment the sequence number for the
   CLOSE, LOCK, LOCKU, OPEN, OPEN_CONFIRM, and OPEN_DOWNGRADE
   operations.  This is true even in the event that the previous
   operation that used the sequence number received an error.  The only
   exception to this rule is if the previous operation received one of
   the following errors: NFS4ERR_STALE_CLIENTID, NFS4ERR_STALE_STATEID,
   NFS4ERR_BAD_STATEID, NFS4ERR_BAD_SEQID.


8.1.6.  Recovery from Replayed Requests

   As described above, the sequence number is per lock_owner.  As long
   as the server maintains the last sequence number received and follows
   the methods described above, there are no risks of a Byzantine router
   re-sending old requests.  The server need only maintain the
   (lock_owner, sequence number) state as long as there are open files
   or closed files with locks outstanding.

   LOCK, LOCKU, OPEN, OPEN_DOWNGRADE, and CLOSE each contain a sequence
   number and therefore the risk of the replay of these operations
   resulting in undesired effects is non-existent while the server
   maintains the lock_owner state.


8.1.7.  Releasing lock_owner State

   When a particular lock_owner no longer holds open or file locking


Expires: February 2003                                         [Page 72]


Draft Specification      NFS version 4 Protocol              August 2002


   state at the server, the server may choose to release the sequence
   number state associated with the lock_owner.  The server may make
   this choice based on lease expiration, for the reclamation of server
   memory, or other implementation specific details.  In any event, the
   server is able to do this safely only when the lock_owner no longer
   is being utilized by the client.  The server may choose to hold the
   lock_owner state in the event that retransmitted requests are
   received.  However, the period to hold this state is implementation
   specific.

   In the case that a LOCK, LOCKU, OPEN_DOWNGRADE, or CLOSE is
   retransmitted after the server has previously released the lock_owner
   state, the server will find that the lock_owner has no files open and
   an error will be returned to the client.  If the lock_owner does have
   a file open, the stateid will not match and again an error is
   returned to the client.


8.1.8.  Use of Open Confirmation

   In the case that an OPEN is retransmitted and the lock_owner is being
   used for the first time or the lock_owner state has been previously
   released by the server, the use of the OPEN_CONFIRM operation will
   prevent incorrect behavior.  When the server observes the use of the
   lock_owner for the first time, it will direct the client to perform
   the OPEN_CONFIRM for the corresponding OPEN.  This sequence
   establishes the use of an lock_owner and associated sequence number.
   Since the OPEN_CONFIRM sequence connects a new open_owner on the
   server with an existing open_owner on a client, the sequence number
   may have any value.  The OPEN_CONFIRM step assures the server that
   the value received is the correct one.  See the section "OPEN_CONFIRM
   - Confirm Open" for further details.

   There are a number of situations in which the requirement to confirm
   an OPEN would pose difficulties for the client and server, in that
   they would be prevented from acting in a timely fashion on
   information received, because that information would be provisional,
   subject to deletion upon non-confirmation.  Fortunately, these are
   situations in which the server can avoid the need for confirmation
   when responding to open requests.  The two constraints are:

   o    The server must not bestow a delegation for any open which would
        require confirmation.

   o    The server MUST NOT require confirmation on a reclaim-type open
        (i.e. one specifying claim type CLAIM_PREVIOUS or
        CLAIM_DELEGATE_PREV).

        These constraints are related in that reclaim-type opens are the
        only ones in which the server may be required to send a
        delegation.  For CLAIM_NULL, sending the delegation is optional
        while for CLAIM_DELEGATE_CUR, no delegation is sent.


Expires: February 2003                                         [Page 73]


Draft Specification      NFS version 4 Protocol              August 2002


        Delegations being sent with an open requiring confirmation are
        troublesome because recovering from non-confirmation adds undue
        complexity to the protocol while requiring confirmation on
        reclaim-type opens poses difficulties in that the inability to
        resolve the status of the reclaim until lease expiration may
        make it difficult to have timely determination of the set of
        locks being reclaimed (since the grace period may expire).

        Requiring open confirmation on reclaim-type opens is avoidable
        because of the nature of the environments in which such opens
        are done.  For CLAIM_PREVIOUS opens, this is immediately after
        server reboot, so there should be no time for lockowners to be
        created, found to be unused, and recycled.  For
        CLAIM_DELEGATE_PREV opens, we are dealing with a client reboot
        situation.  A server which supports delegation can be sure that
        no lockowners for that client have been recycled since client
        initialization and thus can ensure that confirmation will not be
        required.


8.2.  Lock Ranges

   The protocol allows a lock owner to request a lock with a byte range
   and then either upgrade or unlock a sub-range of the initial lock.
   It is expected that this will be an uncommon type of request.  In any
   case, servers or server filesystems may not be able to support sub-
   range lock semantics.  In the event that a server receives a locking
   request that represents a sub-range of current locking state for the
   lock owner, the server is allowed to return the error
   NFS4ERR_LOCK_RANGE to signify that it does not support sub-range lock
   operations.  Therefore, the client should be prepared to receive this
   error and, if appropriate, report the error to the requesting
   application.

   The client is discouraged from combining multiple independent locking
   ranges that happen to be adjacent into a single request since the
   server may not support sub-range requests and for reasons related to
   the recovery of file locking state in the event of server failure.
   As discussed in the section "Server Failure and Recovery" below, the
   server may employ certain optimizations during recovery that work
   effectively only when the client's behavior during lock recovery is
   similar to the client's locking behavior prior to server failure.


8.3.  Upgrading and Downgrading Locks

   If a client has a write lock on a record, it can request an atomic
   downgrade of the lock to a read lock via the LOCK request, by setting
   the type to READ_LT. If the server supports atomic downgrade, the
   request will succeed. If not, it will return NFS4ERR_LOCK_NOTSUPP.
   The client should be prepared to receive this error, and if
   appropriate, report the error to the requesting application.


Expires: February 2003                                         [Page 74]


Draft Specification      NFS version 4 Protocol              August 2002


   If a client has a read lock on a record, it can request an atomic
   upgrade of the lock to a write lock via the LOCK request by setting
   the type to WRITE_LT or WRITEW_LT.  If the server does not support
   atomic upgrade, it will return NFS4ERR_LOCK_NOTSUPP.  If the upgrade
   can be achieved without an existing conflict, the request will
   succeed.  Otherwise, the server will return either NFS4ERR_DENIED or
   NFS4ERR_DEADLOCK.  The error NFS4ERR_DEADLOCK is returned if the
   client issued the LOCK request with the type set to WRITEW_LT and the
   server has detected a deadlock. The client should be prepared to
   receive such errors and if appropriate, report the error to the
   requesting application.


8.4.  Blocking Locks

   Some clients require the support of blocking locks.  The NFS version
   4 protocol must not rely on a callback mechanism and therefore is
   unable to notify a client when a previously denied lock has been
   granted.  Clients have no choice but to continually poll for the
   lock.  This presents a fairness problem.  Two new lock types are
   added, READW and WRITEW, and are used to indicate to the server that
   the client is requesting a blocking lock.  The server should maintain
   an ordered list of pending blocking locks.  When the conflicting lock
   is released, the server may wait the lease period for the first
   waiting client to re-request the lock.  After the lease period
   expires the next waiting client request is allowed the lock.  Clients
   are required to poll at an interval sufficiently small that it is
   likely to acquire the lock in a timely manner.  The server is not
   required to maintain a list of pending blocked locks as it is used to
   increase fairness and not correct operation.  Because of the
   unordered nature of crash recovery, storing of lock state to stable
   storage would be required to guarantee ordered granting of blocking
   locks.

   Servers may also note the lock types and delay returning denial of
   the request to allow extra time for a conflicting lock to be
   released, allowing a successful return.  In this way, clients can
   avoid the burden of needlessly frequent polling for blocking locks.
   The server should take care in the length of delay in the event the
   client retransmits the request.


8.5.  Lease Renewal

   The purpose of a lease is to allow a server to remove stale locks
   that are held by a client that has crashed or is otherwise
   unreachable.  It is not a mechanism for cache consistency and lease
   renewals may not be denied if the lease interval has not expired.

   The following events cause implicit renewal of all of the leases for
   a given client (i.e. all those sharing a given clientid).  Each of
   these is a positive indication that the client is still active and


Expires: February 2003                                         [Page 75]


Draft Specification      NFS version 4 Protocol              August 2002


   that the associated state held at the server, for the client, is
   still valid.

   o    An OPEN with a valid clientid.

   o    Any operation made with a valid stateid (CLOSE, DELEGPURGE,
        DELEGRETURN, LOCK, LOCKU, OPEN, OPEN_CONFIRM, OPEN_DOWNGRADE,
        READ, RENEW, SETATTR, WRITE).  This does not include the special
        stateids of all bits 0 or all bits 1.

        Note that if the client had restarted or rebooted, the
        client would not be making these requests without issuing
        the SETCLIENTID/SETCLIENTID_CONFIRM sequence.  The use of
        the SETCLIENTID/SETCLIENTID_CONFIRM sequence (one that
        changes the client verifier) notifies the server to drop
        the locking state associated with the client.
        SETCLIENTID/SETCLIENTID_CONFIRM never renews a lease.

        If the server has rebooted, the stateids
        (NFS4ERR_STALE_STATEID error) or the clientid
        (NFS4ERR_STALE_CLIENTID error) will not be valid hence
        preventing spurious renewals.

   This approach allows for low overhead lease renewal which scales
   well.  In the typical case no extra RPC calls are required for lease
   renewal and in the worst case one RPC is required every lease period
   (i.e. a RENEW operation).  The number of locks held by the client is
   not a factor since all state for the client is involved with the
   lease renewal action.

   Since all operations that create a new lease also renew existing
   leases, the server must maintain a common lease expiration time for
   all valid leases for a given client.  This lease time can then be
   easily updated upon implicit lease renewal actions.


8.6.  Crash Recovery

   The important requirement in crash recovery is that both the client
   and the server know when the other has failed.  Additionally, it is
   required that a client sees a consistent view of data across server
   restarts or reboots.  All READ and WRITE operations that may have
   been queued within the client or network buffers must wait until the
   client has successfully recovered the locks protecting the READ and
   WRITE operations.


8.6.1.  Client Failure and Recovery

   In the event that a client fails, the server may recover the client's
   locks when the associated leases have expired.  Conflicting locks
   from another client may only be granted after this lease expiration.


Expires: February 2003                                         [Page 76]


Draft Specification      NFS version 4 Protocol              August 2002


   If the client is able to restart or reinitialize within the lease
   period the client may be forced to wait the remainder of the lease
   period before obtaining new locks.

   To minimize client delay upon restart, lock requests are associated
   with an instance of the client by a client supplied verifier.  This
   verifier is part of the initial SETCLIENTID call made by the client.
   The server returns a clientid as a result of the SETCLIENTID
   operation.  The client then confirms the use of the clientid with
   SETCLIENTID_CONFIRM.  The clientid in combination with an opaque
   owner field is then used by the client to identify the lock owner for
   OPEN.  This chain of associations is then used to identify all locks
   for a particular client.

   Since the verifier will be changed by the client upon each
   initialization, the server can compare a new verifier to the verifier
   associated with currently held locks and determine that they do not
   match.  This signifies the client's new instantiation and subsequent
   loss of locking state.  As a result, the server is free to release
   all locks held which are associated with the old clientid which was
   derived from the old verifier.

   Note that the verifier must have the same uniqueness properties of
   the verifier for the COMMIT operation.


8.6.2.  Server Failure and Recovery

   If the server loses locking state (usually as a result of a restart
   or reboot), it must allow clients time to discover this fact and re-
   establish the lost locking state.  The client must be able to re-
   establish the locking state without having the server deny valid
   requests because the server has granted conflicting access to another
   client.  Likewise, if there is the possibility that clients have not
   yet re-established their locking state for a file, the server must
   disallow READ and WRITE operations for that file.  The duration of
   this recovery period is equal to the duration of the lease period.

   A client can determine that server failure (and thus loss of locking
   state) has occurred, when it receives one of two errors.  The
   NFS4ERR_STALE_STATEID error indicates a stateid invalidated by a
   reboot or restart.  The NFS4ERR_STALE_CLIENTID error indicates a
   clientid invalidated by reboot or restart.  When either of these are
   received, the client must establish a new clientid (See the section
   "Client ID") and re-establish the locking state as discussed below.

   The period of special handling of locking and READs and WRITEs, equal
   in duration to the lease period, is referred to as the "grace
   period".  During the grace period, clients recover locks and the
   associated state by reclaim-type locking requests (i.e. LOCK requests
   with reclaim set to true and OPEN operations with a claim type of
   CLAIM_PREVIOUS).  During the grace period, the server must reject


Expires: February 2003                                         [Page 77]


Draft Specification      NFS version 4 Protocol              August 2002


   READ and WRITE operations and non-reclaim locking requests (i.e.
   other LOCK and OPEN operations) with an error of NFS4ERR_GRACE.

   If the server can reliably determine that granting a non-reclaim
   request will not conflict with reclamation of locks by other clients,
   the NFS4ERR_GRACE error does not have to be returned and the non-
   reclaim client request can be serviced.  For the server to be able to
   service READ and WRITE operations during the grace period, it must
   again be able to guarantee that no possible conflict could arise
   between an impending reclaim locking request and the READ or WRITE
   operation.  If the server is unable to offer that guarantee, the
   NFS4ERR_GRACE error must be returned to the client.

   For a server to provide simple, valid handling during the grace
   period, the easiest method is to simply reject all non-reclaim
   locking requests and READ and WRITE operations by returning the
   NFS4ERR_GRACE error.  However, a server may keep information about
   granted locks in stable storage.  With this information, the server
   could determine if a regular lock or READ or WRITE operation can be
   safely processed.

   For example, if a count of locks on a given file is available in
   stable storage, the server can track reclaimed locks for the file and
   when all reclaims have been processed, non-reclaim locking requests
   may be processed.  This way the server can ensure that non-reclaim
   locking requests will not conflict with potential reclaim requests.
   With respect to I/O requests, if the server is able to determine that
   there are no outstanding reclaim requests for a file by information
   from stable storage or another similar mechanism, the processing of
   I/O requests could proceed normally for the file.

   To reiterate, for a server that allows non-reclaim lock and I/O
   requests to be processed during the grace period, it MUST determine
   that no lock subsequently reclaimed will be rejected and that no lock
   subsequently reclaimed would have prevented any I/O operation
   processed during the grace period.

   Clients should be prepared for the return of NFS4ERR_GRACE errors for
   non-reclaim lock and I/O requests.  In this case the client should
   employ a retry mechanism for the request.  A delay (on the order of
   several seconds) between retries should be used to avoid overwhelming
   the server.  Further discussion of the general issue is included in
   [Floyd].  The client must account for the server that is able to
   perform I/O and non-reclaim locking requests within the grace period
   as well as those that can not do so.

   A reclaim-type locking request outside the server's grace period can
   only succeed if the server can guarantee that no conflicting lock or
   I/O request has been granted since reboot or restart.

   A server may, upon restart, establish a new value for the lease
   period.  Therefore, clients should, once a new clientid is


Expires: February 2003                                         [Page 78]


Draft Specification      NFS version 4 Protocol              August 2002


   established, refetch the lease_time attribute and use it as the basis
   for lease renewal for the lease associated with that server. However,
   the server must establish, for this restart event, a grace period at
   least as long as the lease period for the previous server
   instantiation. This allows the client state obtained during the
   previous server instance to be reliably re-established.



8.6.3.  Network Partitions and Recovery

   If the duration of a network partition is greater than the lease
   period provided by the server, the server will have not received a
   lease renewal from the client.  If this occurs, the server may free
   all locks held for the client.  As a result, all stateids held by the
   client will become invalid or stale.  Once the client is able to
   reach the server after such a network partition, all I/O submitted by
   the client with the now invalid stateids will fail with the server
   returning the error NFS4ERR_EXPIRED.  Once this error is received,
   the client will suitably notify the application that held the lock.

   As a courtesy to the client or as an optimization, the server may
   continue to hold locks on behalf of a client for which recent
   communication has extended beyond the lease period.  If the server
   receives a lock or I/O request that conflicts with one of these
   courtesy locks, the server must free the courtesy lock and grant the
   new request.

   If the server continues to hold locks beyond the expiration of a
   client's lease, the server MUST employ a method of recording this
   fact in its stable storage.  Conflicting lock requests from another
   client may be serviced after the lease expiration.  There are various
   scenarios involving server failure after such an event that require
   the storage of these lease expirations or network partitions.  One
   scenario is as follows:

        A client holds a lock at the server and encounters a
        network partition and is unable to renew the associated
        lease.  A second client obtains a conflicting lock and then
        frees the lock.  After the unlock request by the second
        client, the server reboots or reinitializes.  Once the
        server recovers, the network partition heals and the
        original client attempts to reclaim the original lock.

   In this scenario and without any state information, the server will
   allow the reclaim and the client will be in an inconsistent state
   because the server or the client has no knowledge of the conflicting
   lock.

   The server may choose to store this lease expiration or network
   partitioning state in a way that will only identify the client as a
   whole.  Note that this may potentially lead to lock reclaims being


Expires: February 2003                                         [Page 79]


Draft Specification      NFS version 4 Protocol              August 2002


   denied unnecessarily because of a mix of conflicting and non-
   conflicting locks.  The server may also choose to store information
   about each lock that has an expired lease with an associated
   conflicting lock.  The choice of the amount and type of state
   information that is stored is left to the implementor.  In any case,
   the server must have enough state information to enable correct
   recovery from multiple partitions and multiple server failures.

   For further discussion of revocation of locks see the section "Server
   Revocation of Locks".


8.7.  Recovery from a Lock Request Timeout or Abort

   In the event a lock request times out, a client may decide to not
   retry the request.  The client may also abort the request when the
   process for which it was issued is terminated (e.g. in UNIX due to a
   signal).  It is possible though that the server received the request
   and acted upon it.  This would change the state on the server without
   the client being aware of the change.  It is paramount that the
   client re-synchronize state with server before it attempts any other
   operation that takes a seqid and/or a stateid with the same
   lock_owner. This is straightforward to do without a special re-
   synchronize operation.

   Since the server maintains the last lock request and response
   received on the lock_owner, for each lock_owner, the client should
   cache the last lock request it sent such that the lock request did
   not receive a response.  From this, the next time the client does a
   lock operation for the lock_owner, it can send the cached request, if
   there is one, and if the request was one that established state (e.g.
   a LOCK or OPEN operation), the server will return the cached result
   or if never saw the request, perform it.  The client can follow up
   with a request to remove the state (e.g. a LOCKU or CLOSE operation).
   With this approach, the sequencing and stateid information on the
   client and server for the given lock_owner will re-synchronize and in
   turn the lock state will re-synchronize.


8.8.  Server Revocation of Locks

   At any point, the server can revoke locks held by a client and the
   client must be prepared for this event.  When the client detects that
   its locks have been or may have been revoked, the client is
   responsible for validating the state information between itself and
   the server.  Validating locking state for the client means that it
   must verify or reclaim state for each lock currently held.

   The first instance of lock revocation is upon server reboot or re-
   initialization.  In this instance the client will receive an error
   (NFS4ERR_STALE_STATEID or NFS4ERR_STALE_CLIENTID) and the client will
   proceed with normal crash recovery as described in the previous


Expires: February 2003                                         [Page 80]


Draft Specification      NFS version 4 Protocol              August 2002


   section.

   The second lock revocation event is the inability to renew the lease
   before expiration.  While this is considered a rare or unusual event,
   the client must be prepared to recover.  Both the server and client
   will be able to detect the failure to renew the lease and are capable
   of recovering without data corruption.  For the server, it tracks the
   last renewal event serviced for the client and knows when the lease
   will expire.  Similarly, the client must track operations which will
   renew the lease period.  Using the time that each such request was
   sent and the time that the corresponding reply was received, the
   client should bound the time that the corresponding renewal could
   have occurred on the server and thus determine if it is possible that
   a lease period expiration could have occurred.

   The third lock revocation event can occur as a result of
   administrative intervention within the lease period.  While this is
   considered a rare event, it is possible that the server's
   administrator has decided to release or revoke a particular lock held
   by the client.  As a result of revocation, the client will receive an
   error of NFS4ERR_EXPIRED and the error is received within the lease
   period for the lock.  In this instance the client may assume that
   only the lock_owner's locks have been lost.  The client notifies the
   lock holder appropriately.  The client may not assume the lease
   period has been renewed as a result of failed operation.

   When the client determines the lease period may have expired, the
   client must mark all locks held for the associated lease as
   "unvalidated".  This means the client has been unable to re-establish
   or confirm the appropriate lock state with the server.  As described
   in the previous section on crash recovery, there are scenarios in
   which the server may grant conflicting locks after the lease period
   has expired for a client.  When it is possible that the lease period
   has expired, the client must validate each lock currently held to
   ensure that a conflicting lock has not been granted. The client may
   accomplish this task by issuing an I/O request, either a pending I/O
   or a zero-length read, specifying the stateid associated with the
   lock in question. If the response to the request is success, the
   client has validated all of the locks governed by that stateid and
   re-established the appropriate state between itself and the server.
   If the I/O request is not successful, then one or more of the locks
   associated with the stateid was revoked by the server and the client
   must notify the owner.


8.9.  Share Reservations

   A share reservation is a mechanism to control access to a file.  It
   is a separate and independent mechanism from record locking.  When a
   client opens a file, it issues an OPEN operation to the server
   specifying the type of access required (READ, WRITE, or BOTH) and the
   type of access to deny others (deny NONE, READ, WRITE, or BOTH).  If


Expires: February 2003                                         [Page 81]


Draft Specification      NFS version 4 Protocol              August 2002


   the OPEN fails the client will fail the application's open request.

   Pseudo-code definition of the semantics:


                if ((request.access & file_state.deny)) ||
                      (request.deny & file_state.access))
                              return (NFS4ERR_DENIED)

   This checking of share reservations on OPEN is done with no exception
   for an existing OPEN for the same open_owner.

   The constants used for the OPEN and OPEN_DOWNGRADE operations for the
   access and deny fields are as follows:

   const OPEN4_SHARE_ACCESS_READ   = 0x00000001;
   const OPEN4_SHARE_ACCESS_WRITE  = 0x00000002;
   const OPEN4_SHARE_ACCESS_BOTH   = 0x00000003;

   const OPEN4_SHARE_DENY_NONE     = 0x00000000;
   const OPEN4_SHARE_DENY_READ     = 0x00000001;
   const OPEN4_SHARE_DENY_WRITE    = 0x00000002;
   const OPEN4_SHARE_DENY_BOTH     = 0x00000003;


8.10.  OPEN/CLOSE Operations

   To provide correct share semantics, a client MUST use the OPEN
   operation to obtain the initial filehandle and indicate the desired
   access and what if any access to deny.  Even if the client intends to
   use a stateid of all 0's or all 1's, it must still obtain the
   filehandle for the regular file with the OPEN operation so the
   appropriate share semantics can be applied.  For clients that do not
   have a deny mode built into their open programming interfaces, deny
   equal to NONE should be used.

   The OPEN operation with the CREATE flag, also subsumes the CREATE
   operation for regular files as used in previous versions of the NFS
   protocol.  This allows a create with a share to be done atomically.

   The CLOSE operation removes all share reservations held by the
   lock_owner on that file.  If record locks are held, the client SHOULD
   release all locks before issuing a CLOSE.  The server MAY free all
   outstanding locks on CLOSE but some servers may not support the CLOSE
   of a file that still has record locks held.  The server MUST return
   failure, NFS4ERR_LOCKS_HELD, if any locks would exist after the
   CLOSE.

   The LOOKUP operation will return a filehandle without establishing
   any lock state on the server.  Without a valid stateid, the server
   will assume the client has the least access.  For example, a file
   opened with deny READ/WRITE cannot be accessed using a filehandle


Expires: February 2003                                         [Page 82]


Draft Specification      NFS version 4 Protocol              August 2002


   obtained through LOOKUP because it would not have a valid stateid
   (i.e. using a stateid of all bits 0 or all bits 1).


8.10.1.  Close and Retention of State Information

   Since a CLOSE operation requests deallocation of a stateid, dealing
   with retransmission of the CLOSE, may pose special difficulties,
   since the state information, which normally would be used to
   determine the state of the open file being designated, might be
   deallocated, resulting in an NFS4ERR_BAD_STATEID error.

   Servers may deal with this problem in a number of ways.  To provide
   the greatest degree assurance that the protocol is being used
   properly, a server should, rather than deallocate the stateid, mark
   it as close-pending, and retain the stateid with this status, until
   later deallocation.  In this way, a retransmitted CLOSE can be
   recognized since the stateid points to state information with this
   distinctive status, so that it can be handled without error.

   When adopting this strategy, a server should retain the state
   information until the earliest of:

   o    Another validly sequenced request for the same lockowner, that
        is not a retransmission.

   o    The time that a lockowner is freed by the server due to period
        with no activity.

   o    All locks for the client are freed as a result of a SETCLIENTID.


   Servers may avoid this complexity, at the cost of less complete
   protocol error checking, by simply responding NFS4_OK in the event of
   a CLOSE for a deallocated stateid, on the assumption that this case
   must be caused by a retranmitted close.  When adopting this approach,
   it is desirable to at least log an error when returning a no-error
   indication in this situation.  If the server maintains a reply-cache
   mechanism, it can verify the CLOSE is indeed a retransmission and
   avoid error logging in most cases.


8.11.  Open Upgrade and Downgrade

   When an OPEN is done for a file and the lockowner for which the open
   is being done already has the file open, the result is to upgrade the
   open file status maintained on the server to include the access and
   deny bits specified by the new OPEN as well as those for the existing
   OPEN.  The result is that there is one open file, as far as the
   protocol is concerned, and it includes the union of the access and
   deny bits for all of the OPEN requests completed.  Only a single
   CLOSE will be done to reset the effects of both OPEN's.  Note that


Expires: February 2003                                         [Page 83]


Draft Specification      NFS version 4 Protocol              August 2002


   the client, when issuing the OPEN, may not know that the same file is
   in fact being opened.  The above only applies if both OPEN's result
   in the OPEN'ed object being designated by the same filehandle.

   When the server chooses to export multiple filehandles corresponding
   to the same file object and returns different filehandles on two
   different OPEN's of the same file object, the server MUST NOT "OR"
   together the access and deny bits and coalesce the two open files.
   Instead the server must maintain separate OPEN's with separate
   stateid's and will require separate CLOSE's to free them.

   When multiple open files on the client are merged into a single open
   file object on the server, the close of one of the open files (on the
   client) may necessitate change of the access and deny status of the
   open file on the server.  This is because the union of the access and
   deny bits for the remaining open's may be smaller (i.e. a proper
   subset) than previously.  The OPEN_DOWNGRADE operation is used to
   make the necessary change and the client should use it to update the
   server so that share reservation requests by other clients are
   handled properly.


8.12.  Short and Long Leases

   When determining the time period for the server lease, the usual
   lease tradeoffs apply.  Short leases are good for fast server
   recovery at a cost of increased RENEW or READ (with zero length)
   requests.  Longer leases are certainly kinder and gentler to servers
   trying to handle very large numbers of clients.  The number of RENEW
   requests drop in proportion to the lease time.  The disadvantages of
   long leases are slower recovery after server failure (server must
   wait for leases to expire and grace period before granting new lock
   requests) and increased file contention (if client fails to transmit
   an unlock request then server must wait for lease expiration before
   granting new locks).

   Long leases are usable if the server is able to store lease state in
   non-volatile memory.  Upon recovery, the server can reconstruct the
   lease state from its non-volatile memory and continue operation with
   its clients and therefore long leases would not be an issue.


8.13.  Clocks, Propagation Delay, and Calculating Lease Expiration

   To avoid the need for synchronized clocks, lease times are granted by
   the server as a time delta.  However, there is a requirement that the
   client and server clocks do not drift excessively over the duration
   of the lock.  There is also the issue of propagation delay across the
   network which could easily be several hundred milliseconds as well as
   the possibility that requests will be lost and need to be
   retransmitted.



Expires: February 2003                                         [Page 84]


Draft Specification      NFS version 4 Protocol              August 2002


   To take propagation delay into account, the client should subtract it
   from lease times (e.g. if the client estimates the one-way
   propagation delay as 200 msec, then it can assume that the lease is
   already 200 msec old when it gets it).  In addition, it will take
   another 200 msec to get a response back to the server.  So the client
   must send a lock renewal or write data back to the server 400 msec
   before the lease would expire.

   The server's lease period configuration should take into account the
   network distance of the clients that will be accessing the server's
   resources.  It is expected that the lease period will take into
   account the network propogation delays and other network delay
   factors for the client population.  Since the protocol does not allow
   for an automatic method to determine an appropriate lease period, the
   server's administrator may have to tune the lease period.


8.14.  Migration, Replication and State

   When responsibility for handling a given file system is transferred
   to a new server (migration) or the client chooses to use an alternate
   server (e.g. in response to server unresponsiveness) in the context
   of file system replication, the appropriate handling of state shared
   between the client and server (i.e. locks, leases, stateid's, and
   clientid's) is as described below.  The handling differs between
   migration and replication.  For related discussion of file server
   state and recover of such see the sections under "File Locking and
   Share Reservations"

   If server replica or a server immigrating a filesystem agrees to, or
   is expected to, accept opaque values from the client that originated
   from another server, then it is a wise implementation practice for
   the servers to encode the "opaque" values in network byte order. This
   way, servers acting as replicas or immigrating filesystems will be
   able to parse values like stateids, directory cookies, filehandles,
   etc. even if their native byte order is different from other servers
   cooperating in the replication and migration of the filesystem.


8.14.1.  Migration and State

   In the case of migration, the servers involved in the migration of a
   filesystem SHOULD transfer all server state from the original to the
   new server.  This must be done in a way that is transparent to the
   client.  This state transfer will ease the client's transition when a
   filesystem migration occurs.  If the servers are successful in
   transferring all state, the client will continue to use stateid's
   assigned by the original server.  Therefore the new server must
   recognize these stateid's as valid.  This holds true for the clientid
   as well.  Since responsibility for an entire filesystem is
   transferred with a migration event, there is no possibility that
   conflicts will arise on the new server as a result of the transfer of


Expires: February 2003                                         [Page 85]


Draft Specification      NFS version 4 Protocol              August 2002


   locks.

   As part of the transfer of information between servers, leases would
   be transferred as well.  The leases being transferred to the new
   server will typically have a different expiration time from those for
   the same client, previously on the old server.  To maintain the
   property that all leases on a given server for a given client expire
   at the same time, the server should advance the expiration time to
   the later of the leases being transferred or the leases already
   present.  This allows the client to maintain lease renewal of both
   classes without special effort.

   The servers may choose not to transfer the state information upon
   migration.  However, this choice is discouraged.  In this case, when
   the client presents state information from the original server, the
   client must be prepared to receive either NFS4ERR_STALE_CLIENTID or
   NFS4ERR_STALE_STATEID from the new server.  The client should then
   recover its state information as it normally would in response to a
   server failure.  The new server must take care to allow for the
   recovery of state information as it would in the event of server
   restart.


8.14.2.  Replication and State

   Since client switch-over in the case of replication is not under
   server control, the handling of state is different.  In this case,
   leases, stateid's and clientid's do not have validity across a
   transition from one server to another.  The client must re-establish
   its locks on the new server.  This can be compared to the re-
   establishment of locks by means of reclaim-type requests after a
   server reboot.  The difference is that the server has no provision to
   distinguish requests reclaiming locks from those obtaining new locks
   or to defer the latter.  Thus, a client re-establishing a lock on the
   new server (by means of a LOCK or OPEN request), may have the
   requests denied due to a conflicting lock.  Since replication is
   intended for read-only use of filesystems, such denial of locks
   should not pose large difficulties in practice.  When an attempt to
   re-establish a lock on a new server is denied, the client should
   treat the situation as if his original lock had been revoked.


8.14.3.  Notification of Migrated Lease

   In the case of lease renewal, the client may not be submitting
   requests for a filesystem that has been migrated to another server.
   This can occur because of the implicit lease renewal mechanism.  The
   client renews leases for all filesystems when submitting a request to
   any one filesystem at the server.

   In order for the client to schedule renewal of leases that may have
   been relocated to the new server, the client must find out about


Expires: February 2003                                         [Page 86]


Draft Specification      NFS version 4 Protocol              August 2002


   lease relocation before those leases expire.  To accomplish this, all
   operations which implicitly renew leases for a client (i.e. OPEN,
   CLOSE, READ, WRITE, RENEW, LOCK, LOCKT, LOCKU), will return the error
   NFS4ERR_LEASE_MOVED if responsibility for any of the leases to be
   renewed has been transferred to a new server.  This condition will
   continue until the client receives an NFS4ERR_MOVED error and the
   server receives the subsequent GETATTR(fs_locations) for an access to
   each filesystem for which a lease has been moved to a new server.

   When a client receives an NFS4ERR_LEASE_MOVED error, it should
   perform some operation, such as a RENEW, on each filesystem
   associated with the server in question.  When the client receives an
   NFS4ERR_MOVED error, the client can follow the normal process to
   obtain the new server information (through the fs_locations
   attribute) and perform renewal of those leases on the new server.  If
   the server has not had state transferred to it transparently, the
   client will receive either NFS4ERR_STALE_CLIENTID or
   NFS4ERR_STALE_STATEID from the new server, as described above, and
   the client can then recover state information as it does in the event
   of server failure.


8.14.4.  Migration and the Lease_time Attribute

   In order that the client may appropriately manage its leases in the
   case of migration, the destination server must establish proper
   values for the lease_time attribute.

   When state is transferred transparently, that state should include
   the correct value of the lease_time attribute.  The lease_time
   attribute on the destination server must never be less than that on
   the source since this would result in premature expiration of leases
   granted by the source server.  Upon migration in which state is
   transferred transparently, the client is under no obligation to re-
   fetch the lease_time attribute and may continue to use the value
   previously fetched (on the source server).

   If state has not been transferred transparently (i.e. the client sees
   a real or simulated server reboot), the client should fetch the value
   of lease_time on the new (i.e. destination) server, and use it for
   subsequent locking requests.  However the server must respect a grace
   period at least as long as the lease_time on the source server, in
   order to ensure that clients have ample time to reclaim their locks
   before potentially conflicting non-reclaimed locks are granted.  The
   means by which the new server obtains the value of lease_time on the
   old server is left to the server implementations.  It is not
   specified by the NFS version 4 protocol.







Expires: February 2003                                         [Page 87]


Draft Specification      NFS version 4 Protocol              August 2002


9.  Client-Side Caching

   Client-side caching of data, of file attributes, and of file names is
   essential to providing good performance with the NFS protocol.
   Providing distributed cache coherence is a difficult problem and
   previous versions of the NFS protocol have not attempted it.
   Instead, several NFS client implementation techniques have been used
   to reduce the problems that a lack of coherence poses for users.
   These techniques have not been clearly defined by earlier protocol
   specifications and it is often unclear what is valid or invalid
   client behavior.

   The NFS version 4 protocol uses many techniques similar to those that
   have been used in previous protocol versions.  The NFS version 4
   protocol does not provide distributed cache coherence.  However, it
   defines a more limited set of caching guarantees to allow locks and
   share reservations to be used without destructive interference from
   client side caching.

   In addition, the NFS version 4 protocol introduces a delegation
   mechanism which allows many decisions normally made by the server to
   be made locally by clients.  This mechanism provides efficient
   support of the common cases where sharing is infrequent or where
   sharing is read-only.


9.1.  Performance Challenges for Client-Side Caching

   Caching techniques used in previous versions of the NFS protocol have
   been successful in providing good performance.  However, several
   scalability challenges can arise when those techniques are used with
   very large numbers of clients.  This is particularly true when
   clients are geographically distributed which classically increases
   the latency for cache revalidation requests.

   The previous versions of the NFS protocol repeat their file data
   cache validation requests at the time the file is opened.  This
   behavior can have serious performance drawbacks.  A common case is
   one in which a file is only accessed by a single client.  Therefore,
   sharing is infrequent.

   In this case, repeated reference to the server to find that no
   conflicts exist is expensive.  A better option with regards to
   performance is to allow a client that repeatedly opens a file to do
   so without reference to the server.  This is done until potentially
   conflicting operations from another client actually occur.

   A similar situation arises in connection with file locking.  Sending
   file lock and unlock requests to the server as well as the read and
   write requests necessary to make data caching consistent with the
   locking semantics (see the section "Data Caching and File Locking")
   can severely limit performance.  When locking is used to provide


Expires: February 2003                                         [Page 88]


Draft Specification      NFS version 4 Protocol              August 2002


   protection against infrequent conflicts, a large penalty is incurred.
   This penalty may discourage the use of file locking by applications.

   The NFS version 4 protocol provides more aggressive caching
   strategies with the following design goals:


   o    Compatibility with a large range of server semantics.

   o    Provide the same caching benefits as previous versions of the
        NFS protocol when unable to provide the more aggressive model.

   o    Requirements for aggressive caching are organized so that a
        large portion of the benefit can be obtained even when not all
        of the requirements can be met.

   The appropriate requirements for the server are discussed in later
   sections in which specific forms of caching are covered. (see the
   section "Open Delegation").


9.2.  Delegation and Callbacks

   Recallable delegation of server responsibilities for a file to a
   client improves performance by avoiding repeated requests to the
   server in the absence of inter-client conflict.  With the use of a
   "callback" RPC from server to client, a server recalls delegated
   responsibilities when another client engages in sharing of a
   delegated file.

   A delegation is passed from the server to the client, specifying the
   object of the delegation and the type of delegation.  There are
   different types of delegations but each type contains a stateid to be
   used to represent the delegation when performing operations that
   depend on the delegation.  This stateid is similar to those
   associated with locks and share reservations but differs in that the
   stateid for a delegation is associated with a clientid and may be
   used on behalf of all the open_owners for the given client.  A
   delegation is made to the client as a whole and not to any specific
   process or thread of control within it.

   Because callback RPCs may not work in all environments (due to
   firewalls, for example), correct protocol operation does not depend
   on them.  Preliminary testing of callback functionality by means of a
   CB_NULL procedure determines whether callbacks can be supported.  The
   CB_NULL procedure checks the continuity of the callback path.  A
   server makes a preliminary assessment of callback availability to a
   given client and avoids delegating responsibilities until it has
   determined that callbacks are supported.  Because the granting of a
   delegation is always conditional upon the absence of conflicting
   access, clients must not assume that a delegation will be granted and
   they must always be prepared for OPENs to be processed without any


Expires: February 2003                                         [Page 89]


Draft Specification      NFS version 4 Protocol              August 2002


   delegations being granted.

   Once granted, a delegation behaves in most ways like a lock.  There
   is an associated lease that is subject to renewal together with all
   of the other leases held by that client.

   Unlike locks, an operation by a second client to a delegated file
   will cause the server to recall a delegation through a callback.

   On recall, the client holding the delegation must flush modified
   state (such as modified data) to the server and return the
   delegation.  The conflicting request will not receive a response
   until the recall is complete.  The recall is considered complete when
   the client returns the delegation or the server times out on the
   recall and revokes the delegation as a result of the timeout.
   Following the resolution of the recall, the server has the
   information necessary to grant or deny the second client's request.

   At the time the client receives a delegation recall, it may have
   substantial state that needs to be flushed to the server.  Therefore,
   the server should allow sufficient time for the delegation to be
   returned since it may involve numerous RPCs to the server.  If the
   server is able to determine that the client is diligently flushing
   state to the server as a result of the recall, the server may extend
   the usual time allowed for a recall.  However, the time allowed for
   recall completion should not be unbounded.

   An example of this is when responsibility to mediate opens on a given
   file is delegated to a client (see the section "Open Delegation").
   The server will not know what opens are in effect on the client.
   Without this knowledge the server will be unable to determine if the
   access and deny state for the file allows any particular open until
   the delegation for the file has been returned.

   A client failure or a network partition can result in failure to
   respond to a recall callback. In this case, the server will revoke
   the delegation which in turn will render useless any modified state
   still on the client.


9.2.1.  Delegation Recovery

   There are three situations that delegation recovery must deal with:

   o    Client reboot or restart

   o    Server reboot or restart

   o    Network partition (full or callback-only)


   In the event the client reboots or restarts, the failure to renew


Expires: February 2003                                         [Page 90]


Draft Specification      NFS version 4 Protocol              August 2002


   leases will result in the revocation of record locks and share
   reservations.  Delegations, however, may be treated a bit
   differently.

   There will be situations in which delegations will need to be
   reestablished after a client reboots or restarts.  The reason for
   this is the client may have file data stored locally and this data
   was associated with the previously held delegations.  The client will
   need to reestablish the appropriate file state on the server.

   To allow for this type of client recovery, the server MAY extend the
   period for delegation recovery beyond the typical lease expiration
   period.  This implies that requests from other clients that conflict
   with these delegations will need to wait.  Because the normal recall
   process may require significant time for the client to flush changed
   state to the server, other clients need be prepared for delays that
   occur because of a conflicting delegation.  This longer interval
   would increase the window for clients to reboot and consult stable
   storage so that the delegations can be reclaimed.  For open
   delegations, such delegations are reclaimed using OPEN with a claim
   type of CLAIM_DELEGATE_PREV.  (See the sections on "Data Caching and
   Revocation" and "Operation 18: OPEN" for discussion of open
   delegation and the details of OPEN respectively).

   A server MAY support a claim type of CLAIM_DELEGATE_PREV, but if it
   does, it MUST NOT remove delegations upon SETCLIENTID_CONFIRM, and
   instead MUST, for a period of time no less than that of the value of
   the lease_time attribute, maintain the client's delegations to allow
   time for the client to issue CLAIM_DELEGATE_PREV requests. The server
   that supports CLAIM_DELEGATE_PREV MUST support the DELEGPURGE
   operation.

   When the server reboots or restarts, delegations are reclaimed (using
   the OPEN operation with CLAIM_PREVIOUS) in a similar fashion to
   record locks and share reservations.  However, there is a slight
   semantic difference.  In the normal case if the server decides that a
   delegation should not be granted, it performs the requested action
   (e.g. OPEN) without granting any delegation.  For reclaim, the server
   grants the delegation but a special designation is applied so that
   the client treats the delegation as having been granted but recalled
   by the server.  Because of this, the client has the duty to write all
   modified state to the server and then return the delegation.  This
   process of handling delegation reclaim reconciles three principles of
   the NFS version 4 protocol:


   o    Upon reclaim, a client reporting resources assigned to it by an
        earlier server instance must be granted those resources.

   o    The server has unquestionable authority to determine whether
        delegations are to be granted and, once granted, whether they
        are to be continued.


Expires: February 2003                                         [Page 91]


Draft Specification      NFS version 4 Protocol              August 2002


   o    The use of callbacks is not to be depended upon until the client
        has proven its ability to receive them.

   When a network partition occurs, delegations are subject to freeing
   by the server when the lease renewal period expires.  This is similar
   to the behavior for locks and share reservations.  For delegations,
   however, the server may extend the period in which conflicting
   requests are held off.  Eventually the occurrence of a conflicting
   request from another client will cause revocation of the delegation.
   A loss of the callback path (e.g. by later network configuration
   change) will have the same effect.  A recall request will fail and
   revocation of the delegation will result.

   A client normally finds out about revocation of a delegation when it
   uses a stateid associated with a delegation and receives the error
   NFS4ERR_EXPIRED.  It also may find out about delegation revocation
   after a client reboot when it attempts to reclaim a delegation and
   receives that same error.  Note that in the case of a revoked write
   open delegation, there are issues because data may have been modified
   by the client whose delegation is revoked and separately by other
   clients.  See the section "Revocation Recovery for Write Open
   Delegation" for a discussion of such issues.  Note also that when
   delegations are revoked, information about the revoked delegation
   will be written by the server to stable storage (as described in the
   section "Crash Recovery").  This is done to deal with the case in
   which a server reboots after revoking a delegation but before the
   client holding the revoked delegation is notified about the
   revocation.


9.3.  Data Caching

   When applications share access to a set of files, they need to be
   implemented so as to take account of the possibility of conflicting
   access by another application.  This is true whether the applications
   in question execute on different clients or reside on the same
   client.

   Share reservations and record locks are the facilities the NFS
   version 4 protocol provides to allow applications to coordinate
   access by providing mutual exclusion facilities.  The NFS version 4
   protocol's data caching must be implemented such that it does not
   invalidate the assumptions that those using these facilities depend
   upon.


9.3.1.  Data Caching and OPENs

   In order to avoid invalidating the sharing assumptions that
   applications rely on, NFS version 4 clients should not provide cached
   data to applications or modify it on behalf of an application when it
   would not be valid to obtain or modify that same data via a READ or


Expires: February 2003                                         [Page 92]


Draft Specification      NFS version 4 Protocol              August 2002


   WRITE operation.

   Furthermore, in the absence of open delegation (see the section "Open
   Delegation") two additional rules apply.  Note that these rules are
   obeyed in practice by many NFS version 2 and version 3 clients.

   o    First, cached data present on a client must be revalidated after
        doing an OPEN. Revalidating means that the client fetches the
        change attribute from the server, compares it with the cached
        change attribute, and if different, declares the cached data (as
        well as the cached attributes) as invalid.  This is to ensure
        that the data for the OPENed file is still correctly reflected
        in the client's cache.  This validation must be done at least
        when the client's OPEN operation includes DENY=WRITE or BOTH
        thus terminating a period in which other clients may have had
        the opportunity to open the file with WRITE access.  Clients may
        choose to do the revalidation more often (i.e. at OPENs
        specifying DENY=NONE) to parallel the NFS version 3 protocol's
        practice for the benefit of users assuming this degree of cache
        revalidation.

        Since the change attribute is updated for data and metadata
        modifications, some client implementors may be tempted to use
        the time_modify attribute and not change to validate cached
        data, so that metadata changes do not spuriously invalidate
        clean data.  The implementor is cautioned in this approach. The
        change attribute is guaranteed to change for each update to the
        file, whereas time_modify is guaranteed to change only at the
        granularity of the time_delta attribute. Use by the client's
        data cache validation logic of time_modify and not change runs
        the risk of the client incorrectly marking stale data as valid.


   o    Second, modified data must be flushed to the server before
        closing a file OPENed for write.  This is complementary to the
        first rule.  If the data is not flushed at CLOSE, the
        revalidation done after client OPENs as file is unable to
        achieve its purpose.  The other aspect to flushing the data
        before close is that the data must be committed to stable
        storage, at the server, before the CLOSE operation is requested
        by the client.  In the case of a server reboot or restart and a
        CLOSEd file, it may not be possible to retransmit the data to be
        written to the file.  Hence, this requirement.


9.3.2.  Data Caching and File Locking

   For those applications that choose to use file locking instead of
   share reservations to exclude inconsistent file access, there is an
   analogous set of constraints that apply to client side data caching.
   These rules are effective only if the file locking is used in a way
   that matches in an equivalent way the actual READ and WRITE


Expires: February 2003                                         [Page 93]


Draft Specification      NFS version 4 Protocol              August 2002


   operations executed.  This is as opposed to file locking that is
   based on pure convention.  For example, it is possible to manipulate
   a two-megabyte file by dividing the file into two one-megabyte
   regions and protecting access to the two regions by file locks on
   bytes zero and one.  A lock for write on byte zero of the file would
   represent the right to do READ and WRITE operations on the first
   region.  A lock for write on byte one of the file would represent the
   right to do READ and WRITE operations on the second region.  As long
   as all applications manipulating the file obey this convention, they
   will work on a local filesystem.  However, they may not work with the
   NFS version 4 protocol unless clients refrain from data caching.

   The rules for data caching in the file locking environment are:

   o    First, when a client obtains a file lock for a particular
        region, the data cache corresponding to that region (if any
        cache data exists) must be revalidated.  If the change attribute
        indicates that the file may have been updated since the cached
        data was obtained, the client must flush or invalidate the
        cached data for the newly locked region.  A client might choose
        to invalidate all of non-modified cached data that it has for
        the file but the only requirement for correct operation is to
        invalidate all of the data in the newly locked region.

   o    Second, before releasing a write lock for a region, all modified
        data for that region must be flushed to the server.  The
        modified data must also be written to stable storage.

   Note that flushing data to the server and the invalidation of cached
   data must reflect the actual byte ranges locked or unlocked.
   Rounding these up or down to reflect client cache block boundaries
   will cause problems if not carefully done.  For example, writing a
   modified block when only half of that block is within an area being
   unlocked may cause invalid modification to the region outside the
   unlocked area.  This, in turn, may be part of a region locked by
   another client.  Clients can avoid this situation by synchronously
   performing portions of write operations that overlap that portion
   (initial or final) that is not a full block.  Similarly, invalidating
   a locked area which is not an integral number of full buffer blocks
   would require the client to read one or two partial blocks from the
   server if the revalidation procedure shows that the data which the
   client possesses may not be valid.

   The data that is written to the server as a pre-requisite to the
   unlocking of a region must be written, at the server, to stable
   storage.  The client may accomplish this either with synchronous
   writes or by following asynchronous writes with a COMMIT operation.
   This is required because retransmission of the modified data after a
   server reboot might conflict with a lock held by another client.

   A client implementation may choose to accommodate applications which
   use record locking in non-standard ways (e.g. using a record lock as


Expires: February 2003                                         [Page 94]


Draft Specification      NFS version 4 Protocol              August 2002


   a global semaphore) by flushing to the server more data upon an LOCKU
   than is covered by the locked range.  This may include modified data
   within files other than the one for which the unlocks are being done.
   In such cases, the client must not interfere with applications whose
   READs and WRITEs are being done only within the bounds of record
   locks which the application holds.  For example, an application locks
   a single byte of a file and proceeds to write that single byte.  A
   client that chose to handle a LOCKU by flushing all modified data to
   the server could validly write that single byte in response to an
   unrelated unlock.  However, it would not be valid to write the entire
   block in which that single written byte was located since it includes
   an area that is not locked and might be locked by another client.
   Client implementations can avoid this problem by dividing files with
   modified data into those for which all modifications are done to
   areas covered by an appropriate record lock and those for which there
   are modifications not covered by a record lock.  Any writes done for
   the former class of files must not include areas not locked and thus
   not modified on the client.


9.3.3.  Data Caching and Mandatory File Locking

   Client side data caching needs to respect mandatory file locking when
   it is in effect.  The presence of mandatory file locking for a given
   file is indicated when the client gets back NFS4ERR_LOCKED from a
   READ or WRITE on a file it has an appropriate share reservation for.
   When mandatory locking is in effect for a file, the client must check
   for an appropriate file lock for data being read or written.  If a
   lock exists for the range being read or written, the client may
   satisfy the request using the client's validated cache.  If an
   appropriate file lock is not held for the range of the read or write,
   the read or write request must not be satisfied by the client's cache
   and the request must be sent to the server for processing.  When a
   read or write request partially overlaps a locked region, the request
   should be subdivided into multiple pieces with each region (locked or
   not) treated appropriately.


9.3.4.  Data Caching and File Identity

   When clients cache data, the file data needs to organized according
   to the filesystem object to which the data belongs.  For NFS version
   3 clients, the typical practice has been to assume for the purpose of
   caching that distinct filehandles represent distinct filesystem
   objects.  The client then has the choice to organize and maintain the
   data cache on this basis.

   In the NFS version 4 protocol, there is now the possibility to have
   significant deviations from a "one filehandle per object" model
   because a filehandle may be constructed on the basis of the object's
   pathname.  Therefore, clients need a reliable method to determine if
   two filehandles designate the same filesystem object.  If clients


Expires: February 2003                                         [Page 95]


Draft Specification      NFS version 4 Protocol              August 2002


   were simply to assume that all distinct filehandles denote distinct
   objects and proceed to do data caching on this basis, caching
   inconsistencies would arise between the distinct client side objects
   which mapped to the same server side object.

   By providing a method to differentiate filehandles, the NFS version 4
   protocol alleviates a potential functional regression in comparison
   with the NFS version 3 protocol.  Without this method, caching
   inconsistencies within the same client could occur and this has not
   been present in previous versions of the NFS protocol.  Note that it
   is possible to have such inconsistencies with applications executing
   on multiple clients but that is not the issue being addressed here.

   For the purposes of data caching, the following steps allow an NFS
   version 4 client to determine whether two distinct filehandles denote
   the same server side object:


   o    If GETATTR directed to two filehandles have different values of
        the fsid attribute, then the filehandles represent distinct
        objects.

   o    If GETATTR for any file with an fsid that matches the fsid of
        the two filehandles in question returns a unique_handles
        attribute with a value of TRUE, then the two objects are
        distinct.

   o    If GETATTR directed to the two filehandles does not return the
        fileid attribute for one or both of the handles, then it cannot
        be determined whether the two objects are the same.  Therefore,
        operations which depend on that knowledge (e.g. client side data
        caching) cannot be done reliably.

   o    If GETATTR directed to the two filehandles returns different
        values for the fileid attribute, then they are distinct objects.

   o    Otherwise they are the same object.


9.4.  Open Delegation

   When a file is being OPENed, the server may delegate further handling
   of opens and closes for that file to the opening client.  Any such
   delegation is recallable, since the circumstances that allowed for
   the delegation are subject to change.  In particular, the server may
   receive a conflicting OPEN from another client, the server must
   recall the delegation before deciding whether the OPEN from the other
   client may be granted.  Making a delegation is up to the server and
   clients should not assume that any particular OPEN either will or
   will not result in an open delegation.  The following is a typical
   set of conditions that servers might use in deciding whether OPEN
   should be delegated:


Expires: February 2003                                         [Page 96]


Draft Specification      NFS version 4 Protocol              August 2002


   o    The client must be able to respond to the server's callback
        requests.  The server will use the CB_NULL procedure for a test
        of callback ability.

   o    The client must have responded properly to previous recalls.

   o    There must be no current open conflicting with the requested
        delegation.

   o    There should be no current delegation that conflicts with the
        delegation being requested.

   o    The probability of future conflicting open requests should be
        low based on the recent history of the file.

   o    The existence of any server-specific semantics of OPEN/CLOSE
        that would make the required handling incompatible with the
        prescribed handling that the delegated client would apply (see
        below).

   There are two types of open delegations, read and write.  A read open
   delegation allows a client to handle, on its own, requests to open a
   file for reading that do not deny read access to others.  Multiple
   read open delegations may be outstanding simultaneously and do not
   conflict.  A write open delegation allows the client to handle, on
   its own, all opens.  Only one write open delegation may exist for a
   given file at a given time and it is inconsistent with any read open
   delegations.

   When a client has a read open delegation, it may not make any changes
   to the contents or attributes of the file but it is assured that no
   other client may do so.  When a client has a write open delegation,
   it may modify the file data since no other client will be accessing
   the file's data.  The client holding a write delegation may only
   affect file attributes which are intimately connected with the file
   data:  size, time_modify, change.

   When a client has an open delegation, it does not send OPENs or
   CLOSEs to the server but updates the appropriate status internally.
   For a read open delegation, opens that cannot be handled locally
   (opens for write or that deny read access) must be sent to the
   server.

   When an open delegation is made, the response to the OPEN contains an
   open delegation structure which specifies the following:

   o    the type of delegation (read or write)

   o    space limitation information to control flushing of data on
        close (write open delegation only, see the section "Open
        Delegation and Data Caching")



Expires: February 2003                                         [Page 97]


Draft Specification      NFS version 4 Protocol              August 2002


   o    an nfsace4 specifying read and write permissions

   o    a stateid to represent the delegation for READ and WRITE

   The delegation stateid is separate and distinct from the stateid for
   the OPEN proper.  The standard stateid, unlike the delegation
   stateid, is associated with a particular lock_owner and will continue
   to be valid after the delegation is recalled and the file remains
   open.

   When a request internal to the client is made to open a file and open
   delegation is in effect, it will be accepted or rejected solely on
   the basis of the following conditions.  Any requirement for other
   checks to be made by the delegate should result in open delegation
   being denied so that the checks can be made by the server itself.


   o    The access and deny bits for the request and the file as
        described in the section "Share Reservations".

   o    The read and write permissions as determined below.

   The nfsace4 passed with delegation can be used to avoid frequent
   ACCESS calls.  The permission check should be as follows:

   o    If the nfsace4 indicates that the open may be done, then it
        should be granted without reference to the server.

   o    If the nfsace4 indicates that the open may not be done, then an
        ACCESS request must be sent to the server to obtain the
        definitive answer.

   The server may return an nfsace4 that is more restrictive than the
   actual ACL of the file.  This includes an nfsace4 that specifies
   denial of all access.  Note that some common practices such as
   mapping the traditional user "root" to the user "nobody" may make it
   incorrect to return the actual ACL of the file in the delegation
   response.

   The use of delegation together with various other forms of caching
   creates the possibility that no server authentication will ever be
   performed for a given user since all of the user's requests might be
   satisfied locally.  Where the client is depending on the server for
   authentication, the client should be sure authentication occurs for
   each user by use of the ACCESS operation.  This should be the case
   even if an ACCESS operation would not be required otherwise.  As
   mentioned before, the server may enforce frequent authentication by
   returning an nfsace4 denying all access with every open delegation.






Expires: February 2003                                         [Page 98]


Draft Specification      NFS version 4 Protocol              August 2002


9.4.1.  Open Delegation and Data Caching

   OPEN delegation allows much of the message overhead associated with
   the opening and closing files to be eliminated.  An open when an open
   delegation is in effect does not require that a validation message be
   sent to the server.  The continued endurance of the "read open
   delegation" provides a guarantee that no OPEN for write and thus no
   write has occurred.  Similarly, when closing a file opened for write
   and if write open delegation is in effect, the data written does not
   have to be flushed to the server until the open delegation is
   recalled.  The continued endurance of the open delegation provides a
   guarantee that no open and thus no read or write has been done by
   another client.

   For the purposes of open delegation, READs and WRITEs done without an
   OPEN are treated as the functional equivalents of a corresponding
   type of OPEN.  This refers to the READs and WRITEs that use the
   special stateids consisting of all zero bits or all one bits.
   Therefore, READs or WRITEs with a special stateid done by another
   client will force the server to recall a write open delegation.  A
   WRITE with a special stateid done by another client will force a
   recall of read open delegations.

   With delegations, a client is able to avoid writing data to the
   server when the CLOSE of a file is serviced.  The file close system
   call is the usual point at which the client is notified of a lack of
   stable storage for the modified file data generated by the
   application.  At the close, file data is written to the server and
   through normal accounting the server is able to determine if the
   available filesystem space for the data has been exceeded (i.e.
   server returns NFS4ERR_NOSPC or NFS4ERR_DQUOT).  This accounting
   includes quotas.  The introduction of delegations requires that a
   alternative method be in place for the same type of communication to
   occur between client and server.

   In the delegation response, the server provides either the limit of
   the size of the file or the number of modified blocks and associated
   block size.  The server must ensure that the client will be able to
   flush data to the server of a size equal to that provided in the
   original delegation.  The server must make this assurance for all
   outstanding delegations.  Therefore, the server must be careful in
   its management of available space for new or modified data taking
   into account available filesystem space and any applicable quotas.
   The server can recall delegations as a result of managing the
   available filesystem space.  The client should abide by the server's
   state space limits for delegations.  If the client exceeds the stated
   limits for the delegation, the server's behavior is undefined.

   Based on server conditions, quotas or available filesystem space, the
   server may grant write open delegations with very restrictive space
   limitations.  The limitations may be defined in a way that will
   always force modified data to be flushed to the server on close.


Expires: February 2003                                         [Page 99]


Draft Specification      NFS version 4 Protocol              August 2002


   With respect to authentication, flushing modified data to the server
   after a CLOSE has occurred may be problematic.  For example, the user
   of the application may have logged off the client and unexpired
   authentication credentials may not be present.  In this case, the
   client may need to take special care to ensure that local unexpired
   credentials will in fact be available.  This may be accomplished by
   tracking the expiration time of credentials and flushing data well in
   advance of their expiration or by making private copies of
   credentials to assure their availability when needed.


9.4.2.  Open Delegation and File Locks

   When a client holds a write open delegation, lock operations are
   performed locally.  This includes those required for mandatory file
   locking.  This can be done since the delegation implies that there
   can be no conflicting locks.  Similarly, all of the revalidations
   that would normally be associated with obtaining locks and the
   flushing of data associated with the releasing of locks need not be
   done.

   When a client holds a read open delegation, lock operations are not
   performed locally.  All lock operations, including those requesting
   non-exclusive locks, are sent to the server for resolution.


9.4.3.  Handling of CB_GETATTR

   The server needs to employ special handling for a GETATTR where the
   target is a file that has a write open delegation in effect.  The
   reason for this is that the client holding the write delegation may
   have modified the data and the server needs to reflect this change to
   the second client that submitted the GETATTR.  Therefore, the client
   holding the write delegation needs to be interrogated.  The server
   will use the CB_GETATTR operation.  The only attributes that the
   server can reliably query via CB_GETATTR are size and change.

   Since CB_GETATTR is being used to satisfy another client's GETATTR
   request, the server only needs to know if the client holding the
   delegation has a modified version of the file.  If the client's copy
   of the delegated file is not modified (data or size), the server can
   satisfy the second client's GETATTR request from the attributes
   stored locally at the server.  If the file is modified, the server
   only needs to know about this modified state.  If the server
   determines that the file is currently modified, it will respond to
   the second client's GETATTR as if the file had been modified locally
   at the server.  This means that the server will take the current time
   and apply it to the construction of attributes like change and
   time_modify.

   Since the form of the change attribute is determined by the server
   and is opaque to the client, the client and server need to agree on a


Expires: February 2003                                        [Page 100]


Draft Specification      NFS version 4 Protocol              August 2002


   method of communicating the modified state of the file.  For the size
   attribute, the client will report its current view of the file size.
   For the change attribute, the handling is more involved.

   For the client, the following steps will be taken when receiving a
   write delegation:

   o    The value of the change attribute will be obtained from the
        server and cached.  Let this value be represented by c.

   o    The client will create a value greater than c that will be used
        for communicating modified data is held at the client.  Let this
        value be represented by d.

   o    When the client is queried via CB_GETATTR for the change
        attribute, it checks to see if it holds modified data.  If the
        file is modified, the value d is returned for the change
        attribute value.  If this file is not currently modified, the
        client returns the value c for the change attribute.


   While the change attribute is opaque to client in the sense that it
   has no idea what units of time, if any, the server is counting change
   with, it is not opaque in that the client has to treat it as an
   integer, and the server has to be able to see the results of the
   client's changes to that integer. Therefore, the server MUST encode
   the change attribute in network order when sending it to the client,
   the client MUST decode it from network order to its native order when
   receiving it, and the client MUST encode it network order when
   sending it to the server. For this reason, change is defined as an
   integer, rather than an opaque array of octets.

   For the server, the following steps will be taken when providing a
   write delegation:

   o    On providing a write delegation, the server will cache a copy of
        the change attribute.  Let this value be represented by sc.

   o    The server obtains the change attribute from the client.  Let
        this value be cc.

   o    If the value cc is equal to sc, the file is not modified and the
        server returns the current values for change and time_modify
        (for example) to the client requesting GETATTR.

   o    If the value cc is NOT equal to sc, the file is currently
        modified at the client and most likely will be modified at the
        server at a future time.  The server then uses the current time
        to construct attributes values for change and time_modify and
        returns those values to the requestor.

   o    In the case that the file attribute size is different than the


Expires: February 2003                                        [Page 101]


Draft Specification      NFS version 4 Protocol              August 2002


        server's current value, the server treats this as a modification
        regardless of the value of the change attribute retrieved via
        CB_GETATTR and responds to the second client as in the last
        step.


   This methodology resolves issues of clock differences between client
   and server and other scenarios where the use of CB_GETATTR break
   down.


9.4.4.  Recall of Open Delegation

   The following events necessitate recall of an open delegation:

   o    Potentially conflicting OPEN request (or READ/WRITE done with
        "special" stateid)

   o    SETATTR issued by another client

   o    REMOVE request for the file

   o    RENAME request for the file as either source or target of the
        RENAME

   Whether a RENAME of a directory in the path leading to the file
   results in recall of an open delegation depends on the semantics of
   the server filesystem.  If that filesystem denies such RENAMEs when a
   file is open, the recall must be performed to determine whether the
   file in question is, in fact, open.

   In addition to the situations above, the server may choose to recall
   open delegations at any time if resource constraints make it
   advisable to do so.  Clients should always be prepared for the
   possibility of recall.

   When a client receives a recall for an open delegation, it needs to
   update state on the server before returning the delegation.  These
   same updates must be done whenever a client chooses to return a
   delegation voluntarily.  The following items of state need to be
   dealt with:

   o    If the file associated with the delegation is no longer open and
        no previous CLOSE operation has been sent to the server, a CLOSE
        operation must be sent to the server.

   o    If a file has other open references at the client, then OPEN
        operations must be sent to the server.  The appropriate stateids
        will be provided by the server for subsequent use by the client
        since the delegation stateid will not longer be valid.  These
        OPEN requests are done with the claim type of
        CLAIM_DELEGATE_CUR.  This will allow the presentation of the


Expires: February 2003                                        [Page 102]


Draft Specification      NFS version 4 Protocol              August 2002


        delegation stateid so that the client can establish the
        appropriate rights to perform the OPEN.  (see the section
        "Operation 18: OPEN" for details.)

   o    If there are granted file locks, the corresponding LOCK
        operations need to be performed.  This applies to the write open
        delegation case only.

   o    For a write open delegation, if at the time of recall the file
        is not open for write, all modified data for the file must be
        flushed to the server.  If the delegation had not existed, the
        client would have done this data flush before the CLOSE
        operation.

   o    For a write open delegation when a file is still open at the
        time of recall, any modified data for the file needs to be
        flushed to the server.

   o    With the write open delegation in place, it is possible that the
        file was truncated during the duration of the delegation.  For
        example, the truncation could have occurred as a result of an
        OPEN UNCHECKED with a size attribute value of zero.  Therefore,
        if a truncation of the file has occurred and this operation has
        not been propagated to the server, the truncation must occur
        before any modified data is written to the server.

   In the case of write open delegation, file locking imposes some
   additional requirements.  To precisely maintain the associated
   invariant, it is required to flush any modified data in any region
   for which a write lock was released while the write delegation was in
   effect.  However, because the write open delegation implies no other
   locking by other clients, a simpler implementation is to flush all
   modified data for the file (as described just above) if any write
   lock has been released while the write open delegation was in effect.

   An implementation need not wait until delegation recall (or deciding
   to voluntarily return a delegation) to perform any of the above
   actions, if implementation considerations (e.g. resource availability
   constraints) make that desirable.  Generally, however, the fact that
   the actual open state of the file may continue to change makes it not
   worthwhile to send information about opens and closes to the server,
   except as part of delegation return.  Only in the case of closing the
   open that resulted in obtaining the delegation would clients be
   likely to do this early, since, in that case, the close once done
   will not be undone.  Regardless of the client's choices on scheduling
   these actions, all must be performed before the delegation is
   returned, including (when applicable) the close that corresponds to
   the open that resulted in the delegation.  These actions can be
   performed either in previous requests or in previous operations in
   the same COMPOUND request.




Expires: February 2003                                        [Page 103]


Draft Specification      NFS version 4 Protocol              August 2002


9.4.5.  Delegation Revocation

   At the point a delegation is revoked, if there are associated opens
   on the client, the applications holding these opens need to be
   notified.  This notification usually occurs by returning errors for
   READ/WRITE operations or when a close is attempted for the open file.

   If no opens exist for the file at the point the delegation is
   revoked, then notification of the revocation is unnecessary.
   However, if there is modified data present at the client for the
   file, the user of the application should be notified.  Unfortunately,
   it may not be possible to notify the user since active applications
   may not be present at the client.  See the section "Revocation
   Recovery for Write Open Delegation" for additional details.


9.5.  Data Caching and Revocation

   When locks and delegations are revoked, the assumptions upon which
   successful caching depend are no longer guaranteed.  For any locks or
   share reservations that have been revoked, the corresponding owner
   needs to be notified.  This notification includes applications with a
   file open that has a corresponding delegation which has been revoked.
   Cached data associated with the revocation must be removed from the
   client.  In the case of modified data existing in the client's cache,
   that data must be removed from the client without it being written to
   the server.  As mentioned, the assumptions made by the client are no
   longer valid at the point when a lock or delegation has been revoked.
   For example, another client may have been granted a conflicting lock
   after the revocation of the lock at the first client.  Therefore, the
   data within the lock range may have been modified by the other
   client.  Obviously, the first client is unable to guarantee to the
   application what has occurred to the file in the case of revocation.

   Notification to a lock owner will in many cases consist of simply
   returning an error on the next and all subsequent READs/WRITEs to the
   open file or on the close.  Where the methods available to a client
   make such notification impossible because errors for certain
   operations may not be returned, more drastic action such as signals
   or process termination may be appropriate.  The justification for
   this is that an invariant for which an application depends on may be
   violated.  Depending on how errors are typically treated for the
   client operating environment, further levels of notification
   including logging, console messages, and GUI pop-ups may be
   appropriate.


9.5.1.  Revocation Recovery for Write Open Delegation

   Revocation recovery for a write open delegation poses the special
   issue of modified data in the client cache while the file is not
   open.  In this situation, any client which does not flush modified


Expires: February 2003                                        [Page 104]


Draft Specification      NFS version 4 Protocol              August 2002


   data to the server on each close must ensure that the user receives
   appropriate notification of the failure as a result of the
   revocation.  Since such situations may require human action to
   correct problems, notification schemes in which the appropriate user
   or administrator is notified may be necessary.  Logging and console
   messages are typical examples.

   If there is modified data on the client, it must not be flushed
   normally to the server.  A client may attempt to provide a copy of
   the file data as modified during the delegation under a different
   name in the filesystem name space to ease recovery.  Note that when
   the client can determine that the file has not been modified by any
   other client, or when the client has a complete cached copy of file
   in question, such a saved copy of the client's view of the file may
   be of particular value for recovery.  In other case, recovery using a
   copy of the file based partially on the client's cached data and
   partially on the server copy as modified by other clients, will be
   anything but straightforward, so clients may avoid saving file
   contents in these situations or mark the results specially to warn
   users of possible problems.

   Saving of such modified data in delegation revocation situations may
   be limited to files of a certain size or might be used only when
   sufficient disk space is available within the target filesystem.
   Such saving may also be restricted to situations when the client has
   sufficient buffering resources to keep the cached copy available
   until it is properly stored to the target filesystem.



9.6.  Attribute Caching

   The attributes discussed in this section do not include named
   attributes.  Individual named attributes are analogous to files and
   caching of the data for these needs to be handled just as data
   caching is for ordinary files.  Similarly, LOOKUP results from an
   OPENATTR directory are to be cached on the same basis as any other
   pathnames and similarly for directory contents.

   Clients may cache file attributes obtained from the server and use
   them to avoid subsequent GETATTR requests.  Such caching is write
   through in that modification to file attributes is always done by
   means of requests to the server and should not be done locally and
   cached.  The exception to this are modifications to attributes that
   are intimately connected with data caching.  Therefore, extending a
   file by writing data to the local data cache is reflected immediately
   in the size as seen on the client without this change being
   immediately reflected on the server.  Normally such changes are not
   propagated directly to the server but when the modified data is
   flushed to the server, analogous attribute changes are made on the
   server.  When open delegation is in effect, the modified attributes
   may be returned to the server in the response to a CB_RECALL call.


Expires: February 2003                                        [Page 105]


Draft Specification      NFS version 4 Protocol              August 2002


   The result of local caching of attributes is that the attribute
   caches maintained on individual clients will not be coherent. Changes
   made in one order on the server may be seen in a different order on
   one client and in a third order on a different client.

   The typical filesystem application programming interfaces do not
   provide means to atomically modify or interrogate attributes for
   multiple files at the same time.  The following rules provide an
   environment where the potential incoherences mentioned above can be
   reasonably managed.  These rules are derived from the practice of
   previous NFS protocols.

   o    All attributes for a given file (per-fsid attributes excepted)
        are cached as a unit at the client so that no non-
        serializability can arise within the context of a single file.

   o    An upper time boundary is maintained on how long a client cache
        entry can be kept without being refreshed from the server.

   o    When operations are performed that change attributes at the
        server, the updated attribute set is requested as part of the
        containing RPC.  This includes directory operations that update
        attributes indirectly.  This is accomplished by following the
        modifying operation with a GETATTR operation and then using the
        results of the GETATTR to update the client's cached attributes.

   Note that if the full set of attributes to be cached is requested by
   READDIR, the results can be cached by the client on the same basis as
   attributes obtained via GETATTR.

   A client may validate its cached version of attributes for a file by
   fetching just both the change and time_access attributes and assuming
   that if the change attribute has the same value as it did when the
   attributes were cached, then no attributes other than time_access
   have changed.  The reason why time_access is also fetched is because
   many servers operate in environments where the operation that updates
   change does not update time_access.  For example, POSIX file
   semantics do not update access time when a file is modified by the
   write system call.  Therefore, the client that wants a current
   time_access value should fetch it with change during the attribute
   cache validation processing and update its cached time_access.

   The client may maintain a cache of modified attributes for those
   attributes intimately connected with data of modified regular files
   (size, time_modify, and change). Other than those three attributes,
   the client MUST NOT maintain a cache of modified attributes. Instead,
   attribute changes are immediately sent to the server.

   In some operating environments, the equivalent to time_access is
   expected to be implicitly updated by each read of the content of the
   file object.  If an NFS client is caching the content of a file
   object, whether it is a regular file, directory, or symbolic link,


Expires: February 2003                                        [Page 106]


Draft Specification      NFS version 4 Protocol              August 2002


   the client SHOULD NOT update the time_access attribute (via SETATTR
   or a small READ or READDIR request) on the server with each read that
   is satisfied from cache.  The reason is that this can defeat the
   performance benefits of caching content, especially since an explicit
   SETATTR of time_access may alter the change attribute on the server.
   If the change attribute changes, clients that are caching the content
   will think the content has changed, and will re-read unmodified data
   from the server.  Nor is the client encouraged to maintain a modified
   version of time_access in its cache, since this would mean that the
   client will either eventually have to write the access time to the
   server with bad performance effects, or it would never update the
   server's time_access, thereby resulting in a situation where an
   application that caches access time between a close and open of the
   same file observes the access time oscillating between the past and
   present.  The time_access attribute always means the time of last
   access to a file by a read that was satisfied by the server. This way
   clients will tend to see only time_access changes that go forward in
   time.


9.7.  Name Caching

   The results of LOOKUP and READDIR operations may be cached to avoid
   the cost of subsequent LOOKUP operations.  Just as in the case of
   attribute caching, inconsistencies may arise among the various client
   caches.  To mitigate the effects of these inconsistencies and given
   the context of typical filesystem APIs, an upper time boundary is
   maintained on how long a client name cache entry can be kept without
   verifying that the entry has not been made invalid by a directory
   change operation performed by another client.

   When a client is not making changes to a directory for which there
   exist name cache entries, the client needs to periodically fetch
   attributes for that directory to ensure that it is not being
   modified.  After determining that no modification has occurred, the
   expiration time for the associated name cache entries may be updated
   to be the current time plus the name cache staleness bound.

   When a client is making changes to a given directory, it needs to
   determine whether there have been changes made to the directory by
   other clients.  It does this by using the change attribute as
   reported before and after the directory operation in the associated
   change_info4 value returned for the operation.  The server is able to
   communicate to the client whether the change_info4 data is provided
   atomically with respect to the directory operation.  If the change
   values are provided atomically, the client is then able to compare
   the pre-operation change value with the change value in the client's
   name cache.  If the comparison indicates that the directory was
   updated by another client, the name cache associated with the
   modified directory is purged from the client.  If the comparison
   indicates no modification, the name cache can be updated on the
   client to reflect the directory operation and the associated timeout


Expires: February 2003                                        [Page 107]


Draft Specification      NFS version 4 Protocol              August 2002


   extended.  The post-operation change value needs to be saved as the
   basis for future change_info4 comparisons.

   As demonstrated by the scenario above, name caching requires that the
   client revalidate name cache data by inspecting the change attribute
   of a directory at the point when the name cache item was cached.
   This requires that the server update the change attribute for
   directories when the contents of the corresponding directory is
   modified.  For a client to use the change_info4 information
   appropriately and correctly, the server must report the pre and post
   operation change attribute values atomically.  When the server is
   unable to report the before and after values atomically with respect
   to the directory operation, the server must indicate that fact in the
   change_info4 return value.  When the information is not atomically
   reported, the client should not assume that other clients have not
   changed the directory.


9.8.  Directory Caching

   The results of READDIR operations may be used to avoid subsequent
   READDIR operations.  Just as in the cases of attribute and name
   caching, inconsistencies may arise among the various client caches.
   To mitigate the effects of these inconsistencies, and given the
   context of typical filesystem APIs, the following rules should be
   followed:

   o    Cached READDIR information for a directory which is not obtained
        in a single READDIR operation must always be a consistent
        snapshot of directory contents.  This is determined by using a
        GETATTR before the first READDIR and after the last of READDIR
        that contributes to the cache.

   o    An upper time boundary is maintained to indicate the length of
        time a directory cache entry is considered valid before the
        client must revalidate the cached information.

   The revalidation technique parallels that discussed in the case of
   name caching.  When the client is not changing the directory in
   question, checking the change attribute of the directory with GETATTR
   is adequate.  The lifetime of the cache entry can be extended at
   these checkpoints.  When a client is modifying the directory, the
   client needs to use the change_info4 data to determine whether there
   are other clients modifying the directory.  If it is determined that
   no other client modifications are occurring, the client may update
   its directory cache to reflect its own changes.

   As demonstrated previously, directory caching requires that the
   client revalidate directory cache data by inspecting the change
   attribute of a directory at the point when the directory was cached.
   This requires that the server update the change attribute for
   directories when the contents of the corresponding directory is


Expires: February 2003                                        [Page 108]


Draft Specification      NFS version 4 Protocol              August 2002


   modified.  For a client to use the change_info4 information
   appropriately and correctly, the server must report the pre and post
   operation change attribute values atomically.  When the server is
   unable to report the before and after values atomically with respect
   to the directory operation, the server must indicate that fact in the
   change_info4 return value.  When the information is not atomically
   reported, the client should not assume that other clients have not
   changed the directory.














































Expires: February 2003                                        [Page 109]


Draft Specification      NFS version 4 Protocol              August 2002


10.  Minor Versioning

   To address the requirement of an NFS protocol that can evolve as the
   need arises, the NFS version 4 protocol contains the rules and
   framework to allow for future minor changes or versioning.

   The base assumption with respect to minor versioning is that any
   future accepted minor version must follow the IETF process and be
   documented in a standards track RFC.  Therefore, each minor version
   number will correspond to an RFC.  Minor version zero of the NFS
   version 4 protocol is represented by this RFC.  The COMPOUND
   procedure will support the encoding of the minor version being
   requested by the client.

   The following items represent the basic rules for the development of
   minor versions.  Note that a future minor version may decide to
   modify or add to the following rules as part of the minor version
   definition.


   1    Procedures are not added or deleted

        To maintain the general RPC model, NFS version 4 minor versions
        will not add to or delete procedures from the NFS program.


   2    Minor versions may add operations to the COMPOUND and
        CB_COMPOUND procedures.

        The addition of operations to the COMPOUND and CB_COMPOUND
        procedures does not affect the RPC model.


   2.1  Minor versions may append attributes to GETATTR4args, bitmap4,
        and GETATTR4res.

        This allows for the expansion of the attribute model to allow
        for future growth or adaptation.


   2.2  Minor version X must append any new attributes after the last
        documented attribute.

        Since attribute results are specified as an opaque array of
        per-attribute XDR encoded results, the complexity of adding new
        attributes in the midst of the current definitions will be too
        burdensome.


   3    Minor versions must not modify the structure of an existing
        operation's arguments or results.



Expires: February 2003                                        [Page 110]


Draft Specification      NFS version 4 Protocol              August 2002


        Again the complexity of handling multiple structure definitions
        for a single operation is too burdensome.  New operations should
        be added instead of modifying existing structures for a minor
        version.

        This rule does not preclude the following adaptations in a minor
        version.

        o    adding bits to flag fields such as new attributes to
             GETATTR's bitmap4 data type

        o    adding bits to existing attributes like ACLs that have flag
             words

        o    extending enumerated types (including NFS4ERR_*) with new
             values


   4    Minor versions may not modify the structure of existing
        attributes.


   5    Minor versions may not delete operations.

        This prevents the potential reuse of a particular operation
        "slot" in a future minor version.


   6    Minor versions may not delete attributes.


   7    Minor versions may not delete flag bits or enumeration values.


   8    Minor versions may declare an operation as mandatory to NOT
        implement.

        Specifying an operation as "mandatory to not implement" is
        equivalent to obsoleting an operation.  For the client, it means
        that the operation should not be sent to the server.  For the
        server, an NFS error can be returned as opposed to "dropping"
        the request as an XDR decode error.  This approach allows for
        the obsolescence of an operation while maintaining its structure
        so that a future minor version can reintroduce the operation.


   8.1  Minor versions may declare attributes mandatory to NOT
        implement.


   8.2  Minor versions may declare flag bits or enumeration values as
        mandatory to NOT implement.


Expires: February 2003                                        [Page 111]


Draft Specification      NFS version 4 Protocol              August 2002


   9    Minor versions may downgrade features from mandatory to
        recommended, or recommended to optional.


   10   Minor versions may upgrade features from optional to recommended
        or recommended to mandatory.


   11   A client and server that support minor version X must support
        minor versions 0 (zero) through X-1 as well.


   12   No new features may be introduced as mandatory in a minor
        version.

        This rule allows for the introduction of new functionality and
        forces the use of implementation experience before designating a
        feature as mandatory.


   13   A client MUST NOT attempt to use a stateid, filehandle, or
        similar returned object from the COMPOUND procedure with minor
        version X for another COMPOUND procedure with minor version Y,
        where X != Y.






























Expires: February 2003                                        [Page 112]


Draft Specification      NFS version 4 Protocol              August 2002


11.  Internationalization

   The primary issue in which NFS needs to deal with
   internationalization, or I18N, is with respect to file names and
   other strings as used within the protocol.  The choice of string
   representation must allow reasonable name/string access to clients
   which use various languages.  The UTF-8 encoding of the UCS as
   defined by [ISO10646] allows for this type of access and follows the
   policy described in "IETF Policy on Character Sets and Languages",
   [RFC2277].  This choice is explained further in the following.

11.1.  Universal Versus Local Character Sets

   [RFC1345] describes a table of 16 bit characters for many different
   languages (the bit encodings match Unicode, though of course
   [RFC1345] is somewhat out of date with respect to current Unicode
   assignments).  Each character from each language has a unique 16 bit
   value in the 16 bit character set.  Thus this table can be thought of
   as a universal character set.  [RFC1345] then talks about groupings
   of subsets of the entire 16 bit character set into "Charset Tables".
   For example one might take all the Greek characters from the 16 bit
   table (which are consecutively allocated), and normalize their
   offsets to a table that fits in 7 bits.  Thus it is determined that
   "lower case alpha" is in the same position as "upper case a" in the
   US-ASCII table, and "upper case alpha" is in the same position as
   "lower case a" in the US-ASCII table.

   These normalized subset character sets can be thought of as "local
   character sets", suitable for an operating system locale.

   Local character sets are not suitable for the NFS protocol.  Consider
   someone who creates a file with a name in a Swedish character set.
   If someone else later goes to access the file with their locale set
   to the Swedish language, then there are no problems.  But if someone
   in say the US-ASCII locale goes to access the file, the file name
   will look very different, because the Swedish characters in the 7 bit
   table will now be represented in US-ASCII characters on the display.
   It would be preferable to give the US-ASCII user a way to display the
   file name using Swedish glyphs. In order to do that, the NFS protocol
   would have to include the locale with the file name on each operation
   to create a file.

   However, the complexity burden of defining such locales in a way that
   could be understood by all clients and servers, and maintaining them
   in the face of changes would be considerable.  A better solution is
   desirable.

   If the NFS version 4 protocol used a universal 16 bit or 32 bit
   character set (or an encoding of a 16 bit or 32 bit character set
   into octets), then the server and client need not care if the locale
   of the user accessing the file is different than the locale of the
   user who created the file.  The unique 16 bit or 32 bit encoding of


Expires: February 2003                                        [Page 113]


Draft Specification      NFS version 4 Protocol              August 2002


   the character allows for determination of what language the character
   is from and also how to display that character on the client.  The
   server need not know what locales are used.


11.2.  Overview of Universal Character Set Standards

   The previous section makes a case for using a universal character
   set.  This section makes the case for using UTF-8 as the specific
   universal character set for the NFS version 4 protocol.

   [RFC2279] discusses UTF-* (UTF-8 and other UTF-XXX encodings),
   Unicode, and UCS-*.  There are two standards bodies managing
   universal code sets:

   o    ISO/IEC which has the standard 10646-1

   o    Unicode which has the Unicode standard

   Both standards bodies have pledged to track each other's assignments
   of character codes.

   The following is a brief analysis of the various standards.

   UCS       Universal Character Set.  This is ISO/IEC 10646-1: "a
             multi-octet character set called the Universal Character
             Set (UCS), which encompasses most of the world's writing
             systems."


   UCS-2     a two octet per character encoding that addresses the first
             2^16 characters of UCS. Currently there are no UCS
             characters beyond that range.


   UCS-4     a four octet per character encoding that permits the
             encoding of up to 2^31 characters.


   UTF       UTF is an abbreviation of the term "UCS transformation
             format" and is used in the naming of various standards for
             encoding of UCS characters as described below.


   UTF-1     Only historical interest; it has been removed from 10646-1


   UTF-7     Encodes the entire "repertoire" of UCS "characters using
             only octets with the higher order bit clear".  [RFC2152]
             describes UTF-7. UTF-7 accomplishes this by reserving one
             of the 7bit US-ASCII characters as a "shift" character to
             indicate non-US-ASCII characters.


Expires: February 2003                                        [Page 114]


Draft Specification      NFS version 4 Protocol              August 2002


   UTF-8     Unlike UTF-7, uses all 8 bits of the octets. US-ASCII
             characters are encoded as before unchanged. Any octet with
             the high bit cleared can only mean a US-ASCII character.
             The high bit set means that a UCS character is being
             encoded.


   UTF-16    Encodes UCS-4 characters into UCS-2 characters using a
             reserved range in UCS-2.


   Unicode   Unicode and UCS-2 are the same; [RFC2279] states:

        Up to the present time, changes in Unicode and amendments
        to ISO/IEC 10646 have tracked each other, so that the
        character repertoires and code point assignments have
        remained in sync.  The relevant standardization committees
        have committed to maintain this very useful synchronism.


11.3.  Difficulties with UCS-4, UCS-2, Unicode

   Adapting existing applications, and filesystems to multi-octet
   schemes like UCS and Unicode can be difficult.  A significant amount
   of code has been written to process streams of bytes. Also there are
   many existing stored objects described with 7 bit or 8 bit
   characters. Doubling or quadrupling the bandwidth and storage
   requirements seems like an expensive way to accomplish I18N.

   UCS-2 and Unicode are "only" 16 bits long.  That might seem to be
   enough but, according to [Unicode1], 49,194 Unicode characters are
   already assigned.  According to [Unicode2] there are still more
   languages that need to be added.

11.4.  UTF-8 and its solutions

   UTF-8 solves problems for NFS that exist with the use of UCS and
   Unicode.  UTF-8 will encode 16 bit and 32 bit characters in a way
   that will be compact for most users. The encoding table from UCS-4 to
   UTF-8, as copied from [RFC2279]:

      UCS-4 range (hex.)           UTF-8 octet sequence (binary)
    0000 0000-0000 007F   0xxxxxxx
    0000 0080-0000 07FF   110xxxxx 10xxxxxx
    0000 0800-0000 FFFF   1110xxxx 10xxxxxx 10xxxxxx

    0001 0000-001F FFFF   11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
    0020 0000-03FF FFFF   111110xx 10xxxxxx 10xxxxxx 10xxxxxx 10xxxxxx
    0400 0000-7FFF FFFF   1111110x 10xxxxxx 10xxxxxx 10xxxxxx 10xxxxxx
   10xxxxxx

   See [RFC2279] for precise encoding and decoding rules. Note because


Expires: February 2003                                        [Page 115]


Draft Specification      NFS version 4 Protocol              August 2002


   of UTF-16, the algorithm from Unicode/UCS-2 to UTF-8 needs to account
   for the reserved range between D800 and DFFF.

   Note that the 16 bit UCS or Unicode characters require no more than 3
   octets to encode into UTF-8

   Interestingly, UTF-8 has room to handle characters larger than 31
   bits, because the leading octet of form:

           1111111x

   is not defined. If needed, ISO could either use that octet to
   indicate a sequence of an encoded 8 octet character, or perhaps use
   11111110 to permit the next octet to indicate an even more expandable
   character set.

   So using UTF-8 to represent character encodings means never having to
   run out of room.

11.5.  Normalization

   The client and server operating environments may differ in their
   policies and operational methods with respect to character
   normalization (See [Unicode1] for a discussion of normalization
   forms).  This difference may also exist between applications on the
   same client.  This adds to the difficulty of providing a single
   normalization policy for the protocol that allows for maximal
   interoperability.  This issue is similar to the character case issues
   where the server may or may not support case insensitive file name
   matching and may or may not preserve the character case when storing
   file names.  The protocol does not mandate a particular behavior but
   allows for the various permutations.

   The NFS version 4 protocol does not mandate the use of a particular
   normalization form at this time.  A later revision of this
   specification may specify a particular normalization form.
   Therefore, the server and client can expect that they may receive
   unnormalized characters within protocol requests and responses.  If
   the operating environment requires normalization, then the
   implementation must normalize the various UTF-8 encoded strings
   within the protocol before presenting the information to an
   application (at the client) or local filesystem (at the server).


11.6.  UTF-8 Related Errors

   Where the client sends an invalid UTF-8 string, the server should
   return an NFS4ERR_INVAL error.  This includes cases in which
   inappropriate prefixes are detected and where the count includes
   trailing bytes that do not constitute a full UCS character.

   Where the client supplied string is valid UTF-8 but contains


Expires: February 2003                                        [Page 116]


Draft Specification      NFS version 4 Protocol              August 2002


   characters that are not supported by the server as a value for that
   string (e.g. names containing characters that have more than two
   octets on a filesystem that supports Unicode characters only), the
   server should return an NFS4ERR_BADCHAR error.

   Where a UTF-8 string is used as a file name, and the filesystem,
   while supporting all of the characters within the name, does not
   allow that particular name to be used, the error should return the
   error NFS4ERR_BADNAME.  This includes situations in which the server
   filesystem imposes a normalization constraint on name strings, but
   will also include such situations as filesystem prohibitions of "."
   and ".." as file names for certain operations, and other such
   constraints.









































Expires: February 2003                                        [Page 117]


Draft Specification      NFS version 4 Protocol              August 2002


12.  Error Definitions

   NFS error numbers are assigned to failed operations within a compound
   request.  A compound request contains a number of NFS operations that
   have their results encoded in sequence in a compound reply.  The
   results of successful operations will consist of an NFS4_OK status
   followed by the encoded results of the operation.  If an NFS
   operation fails, an error status will be entered in the reply and the
   compound request will be terminated.

   A description of each defined error follows:


   NFS4_OK               Indicates the operation completed successfully.


   NFS4ERR_ACCESS        Permission denied. The caller does not have the
                         correct permission to perform the requested
                         operation. Contrast this with NFS4ERR_PERM,
                         which restricts itself to owner or privileged
                         user permission failures.

   NFS4ERR_ATTRNOTSUPP   An attribute specified is not supported by the
                         server.  Does not apply to the GETATTR
                         operation.

   NFS4ERR_BADCHAR       A UTF-8 string contains a character which is
                         not supported by the server in the context in
                         which it being used.

   NFS4ERR_BAD_COOKIE    READDIR cookie is stale.

   NFS4ERR_BADHANDLE     Illegal NFS filehandle. The filehandle failed
                         internal consistency checks.

   NFS4ERR_BADNAME       A name string in a request consists of valid
                         UTF-8 characters supported by the server but
                         the name is not supported by the server as a
                         valid name for current operation.

   NFS4ERR_BADOWNER      An owner, owner_group, or ACL attribute value
                         can not be translated to local representation.

   NFS4ERR_BADTYPE       An attempt was made to create an object of a
                         type not supported by the server.

   NFS4ERR_BAD_RANGE     The range for a LOCK, LOCKT, or LOCKU operation
                         is not appropriate to the allowable range of
                         offsets for the server.

   NFS4ERR_BAD_SEQID     The sequence number in a locking request is
                         neither the next expected number or the last


Expires: February 2003                                        [Page 118]


Draft Specification      NFS version 4 Protocol              August 2002


                         number processed.

   NFS4ERR_BAD_STATEID   A stateid generated by the current server
                         instance, but which does not designate any
                         locking state (either current or superseded)
                         for a current lockowner-file pair, was used.

   NFS4ERR_BADXDR        The server encountered an XDR decoding error
                         while processing an operation.

   NFS4ERR_CLID_INUSE    The SETCLIENTID operation has found that a
                         client id is already in use by another client.

   NFS4ERR_DEADLOCK      The server has been able to determine a file
                         locking deadlock condition for a blocking lock
                         request.

   NFS4ERR_DELAY         The server initiated the request, but was not
                         able to complete it in a timely fashion. The
                         client should wait and then try the request
                         with a new RPC transaction ID.  For example,
                         this error should be returned from a server
                         that supports hierarchical storage and receives
                         a request to process a file that has been
                         migrated. In this case, the server should start
                         the immigration process and respond to client
                         with this error.  This error may also occur
                         when a necessary delegation recall makes
                         processing a request in a timely fashion
                         impossible.

   NFS4ERR_DENIED        An attempt to lock a file is denied.  Since
                         this may be a temporary condition, the client
                         is encouraged to retry the lock request until
                         the lock is accepted.

   NFS4ERR_DQUOT         Resource (quota) hard limit exceeded. The
                         user's resource limit on the server has been
                         exceeded.

   NFS4ERR_EXIST         File exists. The file specified already exists.

   NFS4ERR_EXPIRED       A lease has expired that is being used in the
                         current operation.

   NFS4ERR_FBIG          File too large. The operation would have caused
                         a file to grow beyond the server's limit.

   NFS4ERR_FHEXPIRED     The filehandle provided is volatile and has
                         expired at the server.

   NFS4ERR_FILE_OPEN     The operation can not be successfully processed


Expires: February 2003                                        [Page 119]


Draft Specification      NFS version 4 Protocol              August 2002


                         because a file involved in the operation is
                         currently open.

   NFS4ERR_GRACE         The server is in its recovery or grace period
                         which should match the lease period of the
                         server.

   NFS4ERR_INVAL         Invalid argument or unsupported argument for an
                         operation. Two examples are attempting a
                         READLINK on an object other than a symbolic
                         link or attempting to SETATTR a time field on a
                         server that does not support this operation.

   NFS4ERR_IO            I/O error. A hard error (for example, a disk
                         error) occurred while processing the requested
                         operation.

   NFS4ERR_ISDIR         Is a directory. The caller specified a
                         directory in a non-directory operation.

   NFS4ERR_LEASE_MOVED   A lease being renewed is associated with a
                         filesystem that has been migrated to a new
                         server.

   NFS4ERR_LOCKED        A read or write operation was attempted on a
                         locked file.

   NFS4ERR_LOCK_NOTSUPP  Server does not support atomic upgrade or
                         downgrade of locks.

   NFS4ERR_LOCK_RANGE    A lock request is operating on a sub-range of a
                         current lock for the lock owner and the server
                         does not support this type of request.

   NFS4ERR_LOCKS_HELD    A CLOSE was attempted and file locks would
                         exist after the CLOSE.

   NFS4ERR_MINOR_VERS_MISMATCH
                         The server has received a request that
                         specifies an unsupported minor version.  The
                         server must return a COMPOUND4res with a zero
                         length operations result array.

   NFS4ERR_MLINK         Too many hard links.

   NFS4ERR_MOVED         The filesystem which contains the current
                         filehandle object has been relocated or
                         migrated to another server.  The client may
                         obtain the new filesystem location by obtaining
                         the "fs_locations" attribute for the current
                         filehandle.  For further discussion, refer to
                         the section "Filesystem Migration or


Expires: February 2003                                        [Page 120]


Draft Specification      NFS version 4 Protocol              August 2002


                         Relocation".

   NFS4ERR_NAMETOOLONG   The filename in an operation was too long.

   NFS4ERR_NODEV         No such device.

   NFS4ERR_NOENT         No such file or directory. The file or
                         directory name specified does not exist.

   NFS4ERR_NOFILEHANDLE  The logical current filehandle value (or, in
                         the case of RESTOREFH, the saved filehandle
                         value) has not been set properly.  This may be
                         a result of a malformed COMPOUND operation
                         (i.e. no PUTFH or PUTROOTFH before an operation
                         that requires the current filehandle be set).

   NFS4ERR_NO_GRACE      A reclaim of client state has fallen outside of
                         the grace period of the server.  As a result,
                         the server can not guarantee that conflicting
                         state has not been provided to another client.

   NFS4ERR_NOSPC         No space left on device. The operation would
                         have caused the server's filesystem to exceed
                         its limit.

   NFS4ERR_NOTDIR        Not a directory. The caller specified a non-
                         directory in a directory operation.

   NFS4ERR_NOTEMPTY      An attempt was made to remove a directory that
                         was not empty.

   NFS4ERR_NOTSUPP       Operation is not supported.

   NFS4ERR_NOT_SAME      This error is returned by the VERIFY operation
                         to signify that the attributes compared were
                         not the same as provided in the client's
                         request.

   NFS4ERR_NXIO          I/O error. No such device or address.

   NFS4ERR_OLD_STATEID   A stateid which designates the locking state
                         for a lockowner-file at an earlier time was
                         used.

   NFS4ERR_OPENMODE      The client attempted a READ, WRITE, LOCK or
                         SETATTR operation not sanctioned by the stateid
                         passed (e.g. writing to a file opened only for
                         read).

   NFS4ERR_OP_ILLEGAL    An illegal operation value has been specified
                         in the argop field of a COMPOUND or CB_COMPOUND
                         procedure.


Expires: February 2003                                        [Page 121]


Draft Specification      NFS version 4 Protocol              August 2002


   NFS4ERR_PERM          Not owner. The operation was not allowed
                         because the caller is either not a privileged
                         user (root) or not the owner of the target of
                         the operation.

   NFS4ERR_READDIR_NOSPC The encoded response to a READDIR request
                         exceeds the size limit set by the initial
                         request.

   NFS4ERR_RECLAIM_BAD   The reclaim provided by the client does not
                         match any of the server's state consistency
                         checks and is bad.

   NFS4ERR_RECLAIM_CONFLICT
                         The reclaim provided by the client has
                         encountered a conflict and can not be provided.
                         Potentially indicates a misbehaving client.

   NFS4ERR_RESOURCE      For the processing of the COMPOUND procedure,
                         the server may exhaust available resources and
                         can not continue processing operationss within
                         the COMPOUND procedure.  This error will be
                         returned from the server in those instances of
                         resource exhaustion related to the processing
                         of the COMPOUND procedure.

   NFS4ERR_ROFS          Read-only filesystem. A modifying operation was
                         attempted on a read-only filesystem.

   NFS4ERR_SAME          This error is returned by the NVERIFY operation
                         to signify that the attributes compared were
                         the same as provided in the client's request.

   NFS4ERR_SERVERFAULT   An error occurred on the server which does not
                         map to any of the legal NFS version 4 protocol
                         error values.  The client should translate this
                         into an appropriate error.  UNIX clients may
                         choose to translate this to EIO.

   NFS4ERR_SHARE_DENIED  An attempt to OPEN a file with a share
                         reservation has failed because of a share
                         conflict.

   NFS4ERR_STALE         Invalid filehandle. The filehandle given in the
                         arguments was invalid. The file referred to by
                         that filehandle no longer exists or access to
                         it has been revoked.

   NFS4ERR_STALE_CLIENTID A clientid not recognized by the server was
                          used in a locking or SETCLIENTID_CONFIRM
                          request.



Expires: February 2003                                        [Page 122]


Draft Specification      NFS version 4 Protocol              August 2002


   NFS4ERR_STALE_STATEID A stateid generated by an earlier server
                         instance was used.

   NFS4ERR_SYMLINK       The current filehandle provided for a LOOKUP is
                         not a directory but a symbolic link.  Also used
                         if the final component of the OPEN path is a
                         symbolic link.

   NFS4ERR_TOOSMALL      Buffer or request is too small.

   NFS4ERR_WRONGSEC      The security mechanism being used by the client
                         for the operation does not match the server's
                         security policy.  The client should change the
                         security mechanism being used and retry the
                         operation.

   NFS4ERR_XDEV          Attempt to do an operation between different
                         fsids.




































Expires: February 2003                                        [Page 123]


Draft Specification      NFS version 4 Protocol              August 2002


13.  NFS version 4 Requests

   For the NFS version 4 RPC program, there are two traditional RPC
   procedures: NULL and COMPOUND.  All other functionality is defined as
   a set of operations and these operations are defined in normal
   XDR/RPC syntax and semantics.  However, these operations are
   encapsulated within the COMPOUND procedure.  This requires that the
   client combine one or more of the NFS version 4 operations into a
   single request.

   The NFS4_CALLBACK program is used to provide server to client
   signaling and is constructed in a similar fashion as the NFS version
   4 program.  The procedures CB_NULL and CB_COMPOUND are defined in the
   same way as NULL and COMPOUND are within the NFS program.  The
   CB_COMPOUND request also encapsulates the remaining operations of the
   NFS4_CALLBACK program.  There is no predefined RPC program number for
   the NFS4_CALLBACK program.  It is up to the client to specify a
   program number in the "transient" program range.  The program and
   port number of the NFS4_CALLBACK program are provided by the client
   as part of the SETCLIENTID/SETCLIENTID_CONFIRM sequence. The program
   and port can be changed by another SETCLIENTID/SETCLIENTID_CONFIRM
   sequence, and it is possible to use the sequence to change them
   within a client incarnation without removing relevant leased client
   state.


13.1.  Compound Procedure

   The COMPOUND procedure provides the opportunity for better
   performance within high latency networks.  The client can avoid
   cumulative latency of multiple RPCs by combining multiple dependent
   operations into a single COMPOUND procedure.  A compound operation
   may provide for protocol simplification by allowing the client to
   combine basic procedures into a single request that is customized for
   the client's environment.

   The CB_COMPOUND procedure precisely parallels the features of
   COMPOUND as described above.

   The basic structure of the COMPOUND procedure is:

   +-----+--------------+--------+-----------+-----------+-----------+--
   | tag | minorversion | numops | op + args | op + args | op + args |
   +-----+--------------+--------+-----------+-----------+-----------+--

   and the reply's structure is:

          +------------+-----+--------+-----------------------+--
          |last status | tag | numres | status + op + results |
          +------------+-----+--------+-----------------------+--

   The numops and numres fields, used in the depiction above, represent


Expires: February 2003                                        [Page 124]


Draft Specification      NFS version 4 Protocol              August 2002


   the count for the counted array encoding use to signify the number of
   arguments or results encoded in the request and response.  As per the
   XDR encoding, these counts must match exactly the number of operation
   arguments or results encoded.


13.2.  Evaluation of a Compound Request

   The server will process the COMPOUND procedure by evaluating each of
   the operations within the COMPOUND procedure in order.  Each
   component operation consists of a 32 bit operation code, followed by
   the argument of length determined by the type of operation. The
   results of each operation are encoded in sequence into a reply
   buffer.  The results of each operation are preceded by the opcode and
   a status code (normally zero).  If an operation results in a non-zero
   status code, the status will be encoded and evaluation of the
   compound sequence will halt and the reply will be returned.  Note
   that evaluation stops even in the event of "non error" conditions
   such as NFS4ERR_SAME.

   There are no atomicity requirements for the operations contained
   within the COMPOUND procedure.  The operations being evaluated as
   part of a COMPOUND request may be evaluated simultaneously with other
   COMPOUND requests that the server receives.

   It is the client's responsibility for recovering from any partially
   completed COMPOUND procedure.  Partially completed COMPOUND
   procedures may occur at any point due to errors such as
   NFS4ERR_RESOURCE and NFS4ERR_DELAY.  This may occur even given an
   otherwise valid operation string.  Further, a server reboot which
   occurs in the middle of processing a COMPOUND procedure may leave the
   client with the difficult task of determining how far COMPOUND
   processing has proceeded.  Therefore, the client should avoid overly
   complex COMPOUND procedures in the event of the failure of an
   operation within the procedure.

   Each operation assumes a "current" and "saved" filehandle that is
   available as part of the execution context of the compound request.
   Operations may set, change, or return the current filehandle.  The
   "saved" filehandle is used for temporary storage of a filehandle
   value and as operands for the RENAME and LINK operations.


13.3.  Synchronous Modifying Operations

   NFS version 4 operations that modify the filesystem are synchronous.
   When an operation is successfully completed at the server, the client
   can depend that any data associated with the request is now on stable
   storage (the one exception is in the case of the file data in a WRITE
   operation with the UNSTABLE option specified).

   This implies that any previous operations within the same compound


Expires: February 2003                                        [Page 125]


Draft Specification      NFS version 4 Protocol              August 2002


   request are also reflected in stable storage.  This behavior enables
   the client's ability to recover from a partially executed compound
   request which may resulted from the failure of the server.  For
   example, if a compound request contains operations A and B and the
   server is unable to send a response to the client, depending on the
   progress the server made in servicing the request the result of both
   operations may be reflected in stable storage or just operation A may
   be reflected.  The server must not have just the results of operation
   B in stable storage.


13.4.  Operation Values

   The operations encoded in the COMPOUND procedure are identified by
   operation values.  To avoid overlap with the RPC procedure numbers,
   operations 0 (zero) and 1 are not defined.  Operation 2 is not
   defined but reserved for future use with minor versioning.





































Expires: February 2003                                        [Page 126]


Draft Specification      NFS version 4 Protocol              August 2002


14.  NFS version 4 Procedures


14.1.  Procedure 0: NULL - No Operation


   SYNOPSIS

     <null>

   ARGUMENT

     void;


   RESULT

     void;

   DESCRIPTION

     Standard NULL procedure.  Void argument, void response.  This
     procedure has no functionality associated with it.  Because of this
     it is sometimes used to measure the overhead of processing a
     service request.  Therefore, the server should ensure that no
     unnecessary work is done in servicing this procedure.

   ERRORS

     None.
























Expires: February 2003                                        [Page 127]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.  Procedure 1: COMPOUND - Compound Operations


   SYNOPSIS

     compoundargs -> compoundres

   ARGUMENT

     union nfs_argop4 switch (nfs_opnum4 argop) {
             case <OPCODE>: <argument>;
             ...
     };

     struct COMPOUND4args {
             utf8string      tag;
             uint32_t        minorversion;
             nfs_argop4      argarray<>;
     };



   RESULT

     union nfs_resop4 switch (nfs_opnum4 resop){
             case <OPCODE>: <result>;
             ...
     };

     struct COMPOUND4res {
             nfsstat4        status;
             utf8string      tag;
             nfs_resop4      resarray<>;
     };



   DESCRIPTION

     The COMPOUND procedure is used to combine one or more of the NFS
     operations into a single RPC request.  The main NFS RPC program has
     two main procedures: NULL and COMPOUND.  All other operations use
     the COMPOUND procedure as a wrapper.

     The COMPOUND procedure is used to combine individual operations
     into a single RPC request.  The server interprets each of the
     operations in turn.  If an operation is executed by the server and
     the status of that operation is NFS4_OK, then the next operation in
     the COMPOUND procedure is executed.  The server continues this
     process until there are no more operations to be executed or one of
     the operations has a status value other than NFS4_OK.



Expires: February 2003                                        [Page 128]


Draft Specification      NFS version 4 Protocol              August 2002


     In the processing of the COMPOUND procedure, the server may find
     that it does not have the available resources to execute any or all
     of the operations within the COMPOUND sequence.  In this case, the
     error NFS4ERR_RESOURCE will be returned for the particular
     operation within the COMPOUND procedure where the resource
     exhaustion occurred.  This assumes that all previous operations
     within the COMPOUND sequence have been evaluated successfully.  The
     results for all of the evaluated operations must be returned to the
     client.

     The server will generally choose between two methods of decoding
     the client's request.  The first would be the traditional one pass
     XDR decode.  If there is an XDR decoding error in this case, the
     RPC XDR decode error would be returned.  The second method would be
     to make an initial pass to decode the basic COMPOUND request and
     then to XDR decode the individual operations; the most interesting
     is the decode of attributes.  In this case, the server may
     encounter an XDR decode error during the second pass.  In this
     case, the server would return the error NFS4ERR_BADXDR to signify
     the decode error.

     The COMPOUND arguments contain a "minorversion" field.  The initial
     and default value for this field is 0 (zero).  This field will be
     used by future minor versions such that the client can communicate
     to the server what minor version is being requested.  If the server
     receives a COMPOUND procedure with a minorversion field value that
     it does not support, the server MUST return an error of
     NFS4ERR_MINOR_VERS_MISMATCH and a zero length resultdata array.

     Contained within the COMPOUND results is a "status" field.  If the
     results array length is non-zero, this status must be equivalent to
     the status of the last operation that was executed within the
     COMPOUND procedure.  Therefore, if an operation incurred an error
     then the "status" value will be the same error value as is being
     returned for the operation that failed.

     Note that operations, 0 (zero) and 1 (one) are not defined for the
     COMPOUND procedure.  Operation 2 is not defined but reserved for
     future definition and use with minor versioning.  If the server
     receives a operation array that contains operation 2 and the
     minorversion field has a value of 0 (zero), an error of
     NFS4ERR_OP_ILLEGAL, as described in the next paragraph, is returned
     to the client.  If an operation array contains an operation 2 and
     the minorversion field is non-zero and the server does not support
     the minor version, the server returns an error of
     NFS4ERR_MINOR_VERS_MISMATCH.  Therefore, the
     NFS4ERR_MINOR_VERS_MISMATCH error takes precedence over all other
     errors.

     It is possible that the server receives a request that contains an
     operation that is less than the first legal operation (OP_ACCESS)
     or greater than the last legal operation (OP_RELEASE_LOCKOWNER).


Expires: February 2003                                        [Page 129]


Draft Specification      NFS version 4 Protocol              August 2002


     In this case, the server's response will encode the opcode
     OP_ILLEGAL rather than the illegal opcode of the request. The
     status field in the ILLEGAL return results will set to
     NFS4ERR_OP_ILLEGAL.  The COMPOUND procedure's return results will
     also be NFS4ERR_OP_ILLEGAL.

     The definition of the "tag" in the request is left to the
     implementor.  It may be used to summarize the content of the
     compound request for the benefit of packet sniffers and engineers
     debugging implementations.  However, the value of "tag" in the
     response SHOULD be the same value as provided in the request.  This
     applies to the tag field of the CB_COMPOUND procedure as well.



   IMPLEMENTATION

     Since an error of any type may occur after only a portion of the
     operations have been evaluated, the client must be prepared to
     recover from any failure.  If the source of an NFS4ERR_RESOURCE
     error was a complex or lengthy set of operations, it is likely that
     if the number of operations were reduced the server would be able
     to evaluate them successfully.  Therefore, the client is
     responsible for dealing with this type of complexity in recovery.



   ERRORS

     All errors defined in the protocol
























Expires: February 2003                                        [Page 130]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.1.  Operation 3: ACCESS - Check Access Rights


   SYNOPSIS

     (cfh), accessreq -> supported, accessrights


   ARGUMENT

     const ACCESS4_READ      = 0x00000001;
     const ACCESS4_LOOKUP    = 0x00000002;
     const ACCESS4_MODIFY    = 0x00000004;
     const ACCESS4_EXTEND    = 0x00000008;
     const ACCESS4_DELETE    = 0x00000010;
     const ACCESS4_EXECUTE   = 0x00000020;

     struct ACCESS4args {
             /* CURRENT_FH: object */
             uint32_t        access;
     };



   RESULT

     struct ACCESS4resok {
             uint32_t        supported;
             uint32_t        access;
     };

     union ACCESS4res switch (nfsstat4 status) {
      case NFS4_OK:
              ACCESS4resok   resok4;
      default:
              void;
     };


   DESCRIPTION

     ACCESS determines the access rights that a user, as identified by
     the credentials in the RPC request, has with respect to the file
     system object specified by the current filehandle.  The client
     encodes the set of access rights that are to be checked in the bit
     mask "access".  The server checks the permissions encoded in the
     bit mask.  If a status of NFS4_OK is returned, two bit masks are
     included in the response.  The first, "supported", represents the
     access rights for which the server can verify reliably.  The
     second, "access", represents the access rights available to the
     user for the filehandle provided.  On success, the current
     filehandle retains its value.


Expires: February 2003                                        [Page 131]


Draft Specification      NFS version 4 Protocol              August 2002


     Note that the supported field will contain only as many values as
     was originally sent in the arguments.  For example, if the client
     sends an ACCESS operation with only the ACCESS4_READ value set and
     the server supports this value, the server will return only
     ACCESS4_READ even if it could have reliably checked other values.

     The results of this operation are necessarily advisory in nature.
     A return status of NFS4_OK and the appropriate bit set in the bit
     mask does not imply that such access will be allowed to the file
     system object in the future. This is because access rights can be
     revoked by the server at any time.

     The following access permissions may be requested:

   ACCESS4_READ    Read data from file or read a directory.

   ACCESS4_LOOKUP  Look up a name in a directory (no meaning for non-
                   directory objects).

   ACCESS4_MODIFY  Rewrite existing file data or modify existing
                   directory entries.

   ACCESS4_EXTEND  Write new data or add directory entries.

   ACCESS4_DELETE  Delete an existing directory entry (no meaning for
                   non-directory objects).

   ACCESS4_EXECUTE Execute file (no meaning for a directory).

   On success, the current filehandle retains its value.


   IMPLEMENTATION

     In general, it is not sufficient for the client to attempt to
     deduce access permissions by inspecting the uid, gid, and mode
     fields in the file attributes or by attempting to interpret the
     contents of the ACL attribute.  This is because the server may
     perform uid or gid mapping or enforce additional access control
     restrictions.  It is also possible that the server may not be in
     the same ID space as the client.  In these cases (and perhaps
     others), the client can not reliably perform an access check with
     only current file attributes.

     In the NFS version 2 protocol, the only reliable way to determine
     whether an operation was allowed was to try it and see if it
     succeeded or failed.  Using the ACCESS operation in the NFS version
     4 protocol, the client can ask the server to indicate whether or
     not one or more classes of operations are permitted.  The ACCESS
     operation is provided to allow clients to check before doing a
     series of operations which will result in an access failure.  The
     OPEN operation provides a point where the server can verify access


Expires: February 2003                                        [Page 132]


Draft Specification      NFS version 4 Protocol              August 2002


     to the file object and method to return that information to the
     client.  The ACCESS operation is still useful for directory
     operations or for use in the case the UNIX API "access" is used on
     the client.

     The information returned by the server in response to an ACCESS
     call is not permanent.  It was correct at the exact time that the
     server performed the checks, but not necessarily afterwards.  The
     server can revoke access permission at any time.

     The client should use the effective credentials of the user to
     build the authentication information in the ACCESS request used to
     determine access rights.  It is the effective user and group
     credentials that are used in subsequent read and write operations.

     Many implementations do not directly support the ACCESS4_DELETE
     permission.  Operating systems like UNIX will ignore the
     ACCESS4_DELETE bit if set on an access request on a non-directory
     object.  In these systems, delete permission on a file is
     determined by the access permissions on the directory in which the
     file resides, instead of being determined by the permissions of the
     file itself.  Therefore, the mask returned enumerating which access
     rights can be determined will have the ACCESS4_DELETE value set to
     0.  This indicates to the client that the server was unable to
     check that particular access right.  The ACCESS4_DELETE bit in the
     access mask returned will then be ignored by the client.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_FHEXPIRED
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE













Expires: February 2003                                        [Page 133]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.2.  Operation 4: CLOSE - Close File



   SYNOPSIS

     (cfh), seqid, open_stateid -> open_stateid


   ARGUMENT

     struct CLOSE4args {
             /* CURRENT_FH: object */
             seqid4          seqid
             stateid4        open_stateid;
     };



   RESULT

     union CLOSE4res switch (nfsstat4 status) {
      case NFS4_OK:
              stateid4       open_stateid;
      default:
              void;
     };



   DESCRIPTION

     The CLOSE operation releases share reservations for the regular or
     named attribute file as specified by the current filehandle.  The
     share reservations and other state information released at the
     server as a result of this CLOSE is only associated with the
     supplied stateid.  The sequence id provides for the correct
     ordering. State associated with other OPENs is not affected.

     If record locks are held, the client SHOULD release all locks
     before issuing a CLOSE.  The server MAY free all outstanding locks
     on CLOSE but some servers may not support the CLOSE of a file that
     still has record locks held.  The server MUST return failure if any
     locks would exist after the CLOSE.

     On success, the current filehandle retains its value.

   IMPLEMENTATION

     Even though CLOSE returns a stateid, this stateid is not useful to
     the client and should be treated as deprecated.  CLOSE "shuts down"
     the state associated with all OPENs for the file by a single


Expires: February 2003                                        [Page 134]


Draft Specification      NFS version 4 Protocol              August 2002


     open_owner.  As noted above, CLOSE will either release all file
     locking state or return an error.  Therefore, the stateid returned
     by CLOSE is not useful for operations that follow.

   ERRORS

     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_SEQID
     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_EXPIRED
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_INVAL
     NFS4ERR_ISDIR
     NFS4ERR_LEASE_MOVED
     NFS4ERR_LOCKS_HELD
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_OLD_STATEID
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_STALE_STATEID





























Expires: February 2003                                        [Page 135]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.3.  Operation 5: COMMIT - Commit Cached Data


   SYNOPSIS

     (cfh), offset, count -> verifier

   ARGUMENT

     struct COMMIT4args {
             /* CURRENT_FH: file */
             offset4         offset;
             count4          count;
     };


   RESULT

     struct COMMIT4resok {
             verifier4       writeverf;
     };

     union COMMIT4res switch (nfsstat4 status) {
      case NFS4_OK:
              COMMIT4resok   resok4;
      default:
              void;
     };


   DESCRIPTION

     The COMMIT operation forces or flushes data to stable storage for
     the file specified by the current filehandle.  The flushed data is
     that which was previously written with a WRITE operation which had
     the stable field set to UNSTABLE4.

     The offset specifies the position within the file where the flush
     is to begin.  An offset value of 0 (zero) means to flush data
     starting at the beginning of the file.  The count specifies the
     number of bytes of data to flush.  If count is 0 (zero), a flush
     from offset to the end of the file is done.

     The server returns a write verifier upon successful completion of
     the COMMIT.  The write verifier is used by the client to determine
     if the server has restarted or rebooted between the initial
     WRITE(s) and the COMMIT.  The client does this by comparing the
     write verifier returned from the initial writes and the verifier
     returned by the COMMIT operation.  The server must vary the value
     of the write verifier at each server event or instantiation that
     may lead to a loss of uncommitted data.  Most commonly this occurs
     when the server is rebooted; however, other events at the server


Expires: February 2003                                        [Page 136]


Draft Specification      NFS version 4 Protocol              August 2002


     may result in uncommitted data loss as well.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     The COMMIT operation is similar in operation and semantics to the
     POSIX fsync(2) system call that synchronizes a file's state with
     the disk (file data and metadata is flushed to disk or stable
     storage). COMMIT performs the same operation for a client, flushing
     any unsynchronized data and metadata on the server to the server's
     disk or stable storage for the specified file.  Like fsync(2), it
     may be that there is some modified data or no modified data to
     synchronize.  The data may have been synchronized by the server's
     normal periodic buffer synchronization activity.  COMMIT should
     return NFS4_OK, unless there has been an unexpected error.

     COMMIT differs from fsync(2) in that it is possible for the client
     to flush a range of the file (most likely triggered by a buffer-
     reclamation scheme on the client before file has been completely
     written).

     The server implementation of COMMIT is reasonably simple.  If the
     server receives a full file COMMIT request, that is starting at
     offset 0 and count 0, it should do the equivalent of fsync()'ing
     the file.  Otherwise, it should arrange to have the cached data in
     the range specified by offset and count to be flushed to stable
     storage.  In both cases, any metadata associated with the file must
     be flushed to stable storage before returning.  It is not an error
     for there to be nothing to flush on the server.  This means that
     the data and metadata that needed to be flushed have already been
     flushed or lost during the last server failure.

     The client implementation of COMMIT is a little more complex.
     There are two reasons for wanting to commit a client buffer to
     stable storage.  The first is that the client wants to reuse a
     buffer.  In this case, the offset and count of the buffer are sent
     to the server in the COMMIT request.  The server then flushes any
     cached data based on the offset and count, and flushes any metadata
     associated with the file.  It then returns the status of the flush
     and the write verifier.  The other reason for the client to
     generate a COMMIT is for a full file flush, such as may be done at
     close.  In this case, the client would gather all of the buffers
     for this file that contain uncommitted data, do the COMMIT
     operation with an offset of 0 and count of 0, and then free all of
     those buffers.  Any other dirty buffers would be sent to the server
     in the normal fashion.

     After a buffer is written by the client with the stable parameter
     set to UNSTABLE4, the buffer must be considered as modified by the
     client until the buffer has either been flushed via a COMMIT


Expires: February 2003                                        [Page 137]


Draft Specification      NFS version 4 Protocol              August 2002


     operation or written via a WRITE operation with stable parameter
     set to FILE_SYNC4 or DATA_SYNC4. This is done to prevent the buffer
     from being freed and reused before the data can be flushed to
     stable storage on the server.

     When a response is returned from either a WRITE or a COMMIT
     operation and it contains a write verifier that is different than
     previously returned by the server, the client will need to
     retransmit all of the buffers containing uncommitted cached data to
     the server.  How this is to be done is up to the implementor.  If
     there is only one buffer of interest, then it should probably be
     sent back over in a WRITE request with the appropriate stable
     parameter.  If there is more than one buffer, it might be
     worthwhile retransmitting all of the buffers in WRITE requests with
     the stable parameter set to UNSTABLE4 and then retransmitting the
     COMMIT operation to flush all of the data on the server to stable
     storage.  The timing of these retransmissions is left to the
     implementor.

     The above description applies to page-cache-based systems as well
     as buffer-cache-based systems.  In those systems, the virtual
     memory system will need to be modified instead of the buffer cache.

   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BADXDR
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_ISDIR
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
















Expires: February 2003                                        [Page 138]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.4.  Operation 6: CREATE - Create a Non-Regular File Object


   SYNOPSIS

     (cfh), name, type, attrs -> (cfh), change_info, attrs_set

   ARGUMENT

     union createtype4 switch (nfs_ftype4 type) {
      case NF4LNK:
              linktext4      linkdata;
      case NF4BLK:
      case NF4CHR:
              specdata4      devdata;
      case NF4SOCK:
      case NF4FIFO:
      case NF4DIR:
              void;
     };

     struct CREATE4args {
             /* CURRENT_FH: directory for creation */
             createtype4     objtype;
             component4      objname;
             fattr4          createattrs;
     };


   RESULT

     struct CREATE4resok {
             change_info4    cinfo;
             bitmap4         attrset;        /* attributes set */
     };

     union CREATE4res switch (nfsstat4 status) {
      case NFS4_OK:
              CREATE4resok resok4;
      default:
              void;
     };


   DESCRIPTION

     The CREATE operation creates a non-regular file object in a
     directory with a given name.  The OPEN operation MUST be used to
     create a regular file.

     The objname specifies the name for the new object.  The objtype
     determines the type of object to be created: directory, symlink,


Expires: February 2003                                        [Page 139]


Draft Specification      NFS version 4 Protocol              August 2002


     etc.

     If an object of the same name already exists in the directory, the
     server will return the error NFS4ERR_EXIST.

     For the directory where the new file object was created, the server
     returns change_info4 information in cinfo.  With the atomic field
     of the change_info4 struct, the server will indicate if the before
     and after change attributes were obtained atomically with respect
     to the file object creation.

     If the objname has a length of 0 (zero), or if objname does not
     obey the UTF-8 definition, the error NFS4ERR_INVAL will be
     returned.

     The current filehandle is replaced by that of the new object.

     The createattrs specifies the initial set of attributes for the
     object.  The set of attributes may include any writable attribute
     valid for the object type. When the operation is successful, the
     server will return to the client an attribute mask signifying which
     attributes were successfully set for the object.

     If createattrs includes neither the owner attribute nor an ACL with
     an ACE for the owner, and if the server's filesystem both supports
     and requires an owner attribute (or an owner ACE) then the server
     MUST derive the owner (or the owner ACE). This would typically be
     from the principal indicated in the RPC credentials of the call,
     but the server's operating environment or filesystem semantics may
     dictate other methods of derivation. Similarly, if createattrs
     includes neither the group attribute nor a group ACE, and if the
     server's filesystem both supports and requires the notion of a
     group attribute (or group ACE), the server MUST derive the group
     attribute (or the corresponding owner ACE) for the file. This could
     be from the RPC call's credentials, such as the group principal if
     the credentials include it (such as with AUTH_SYS), from the group
     identifier associated with the principal in the credentials (for
     e.g., POSIX systems have a passwd database that has the group
     identifier for every user identifier), inherited from directory the
     object is created in, or whatever else the server's operating
     environment or filesystem semantics dictate. This applies to the
     OPEN operation too.

     Conversely, it is possible the client will specify in createattrs
     an owner attribute or group attribute or ACL that the principal
     indicated the RPC call's credentials does not have permissions to
     create files for. The error to be returned in this instance is
     NFS4ERR_PERM. This applies to the OPEN operation too.


   IMPLEMENTATION



Expires: February 2003                                        [Page 140]


Draft Specification      NFS version 4 Protocol              August 2002


     If the client desires to set attribute values after the create, a
     SETATTR operation can be added to the COMPOUND request so that the
     appropriate attributes will be set.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_ATTRNOTSUPP
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADNAME
     NFS4ERR_BADOWNER
     NFS4ERR_BADTYPE
     NFS4ERR_BADXDR
     NFS4ERR_DQUOT
     NFS4ERR_EXIST
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NAMETOOLONG
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOSPC
     NFS4ERR_NOTDIR
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
























Expires: February 2003                                        [Page 141]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.5.  Operation 7: DELEGPURGE - Purge Delegations Awaiting Recovery


   SYNOPSIS

     clientid ->

   ARGUMENT

     struct DELEGPURGE4args {
             clientid4       clientid;
     };


   RESULT

     struct DELEGPURGE4res {
             nfsstat4        status;
     };


   DESCRIPTION

     Purges all of the delegations awaiting recovery for a given client.
     This is useful for clients which do not commit delegation
     information to stable storage to indicate that conflicting requests
     need not be delayed by the server awaiting recovery of delegation
     information.

     This operation should be used by clients that record delegation
     information on stable storage on the client.  In this case,
     DELEGPURGE should be issued immediately after doing delegation
     recovery on all delegations known to the client.  Doing so will
     notify the server that no additional delegations for the client
     will be recovered allowing it to free resources, and avoid delaying
     other clients who make requests that conflict with the unrecovered
     delegations.  The set of delegations known to the server and the
     client may be different.  The reason for this is that a client may
     fail after making a request which resulted in delegation but before
     it received the results and committed them to the client's stable
     storage.

     The server MAY support DELEGPURGE, but if it does not, it MUST NOT
     support CLAIM_DELEGATE_PREV.

   ERRORS

     NFS4ERR_BADXDR
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE_CLIENTID


Expires: February 2003                                        [Page 142]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.6.  Operation 8: DELEGRETURN - Return Delegation


   SYNOPSIS

     (cfh), stateid ->

   ARGUMENT

     struct DELEGRETURN4args {
             /* CURRENT_FH: delegated file */
             stateid4        stateid;
     };


   RESULT

     struct DELEGRETURN4res {
             nfsstat4        status;
     };


   DESCRIPTION

     Returns the delegation represented by the current filehandle and
     stateid.

     Delegations may be returned when recalled or voluntarily (i.e.
     before the server has recalled them).  In either case the client
     must properly propagate state changed under the context of the
     delegation to the server before returning the delegation.

   ERRORS

     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_EXPIRED
     NFS4ERR_OLD_STATEID
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE_STATEID













Expires: February 2003                                        [Page 143]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.7.  Operation 9: GETATTR - Get Attributes


   SYNOPSIS

     (cfh), attrbits -> attrbits, attrvals

   ARGUMENT

     struct GETATTR4args {
             /* CURRENT_FH: directory or file */
             bitmap4         attr_request;
     };


   RESULT

     struct GETATTR4resok {
             fattr4          obj_attributes;
     };

     union GETATTR4res switch (nfsstat4 status) {
      case NFS4_OK:
              GETATTR4resok  resok4;
      default:
              void;
     };


   DESCRIPTION

     The GETATTR operation will obtain attributes for the filesystem
     object specified by the current filehandle.  The client sets a bit
     in the bitmap argument for each attribute value that it would like
     the server to return.  The server returns an attribute bitmap that
     indicates the attribute values for which it was able to return,
     followed by the attribute values ordered lowest attribute number
     first.

     The server must return a value for each attribute that the client
     requests if the attribute is supported by the server.  If the
     server does not support an attribute or cannot approximate a useful
     value then it must not return the attribute value and must not set
     the attribute bit in the result bitmap.  The server must return an
     error if it supports an attribute but cannot obtain its value.  In
     that case no attribute values will be returned.

     All servers must support the mandatory attributes as specified in
     the section "File Attributes".

     On success, the current filehandle retains its value.



Expires: February 2003                                        [Page 144]


Draft Specification      NFS version 4 Protocol              August 2002


   IMPLEMENTATION



   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE




































Expires: February 2003                                        [Page 145]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.8.  Operation 10: GETFH - Get Current Filehandle


   SYNOPSIS

     (cfh) -> filehandle

   ARGUMENT

     /* CURRENT_FH: */
     void;


   RESULT

     struct GETFH4resok {
             nfs_fh4         object;
     };

     union GETFH4res switch (nfsstat4 status) {
      case NFS4_OK:
             GETFH4resok     resok4;
      default:
             void;
     };


   DESCRIPTION

     This operation returns the current filehandle value.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     Operations that change the current filehandle like LOOKUP or CREATE
     do not automatically return the new filehandle as a result.  For
     instance, if a client needs to lookup a directory entry and obtain
     its filehandle then the following request is needed.


             PUTFH  (directory filehandle)
             LOOKUP (entry name)
             GETFH


   ERRORS

     NFS4ERR_BADHANDLE
     NFS4ERR_FHEXPIRED
     NFS4ERR_MOVED


Expires: February 2003                                        [Page 146]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_NOFILEHANDLE
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE


















































Expires: February 2003                                        [Page 147]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.9.  Operation 11: LINK - Create Link to a File


   SYNOPSIS

     (sfh), (cfh), newname -> (cfh), change_info

   ARGUMENT

     struct LINK4args {
             /* SAVED_FH: source object */
             /* CURRENT_FH: target directory */
             component4      newname;
     };


   RESULT

     struct LINK4resok {
             change_info4    cinfo;
     };

     union LINK4res switch (nfsstat4 status) {
      case NFS4_OK:
              LINK4resok resok4;
      default:
              void;
     };


   DESCRIPTION

     The LINK operation creates an additional newname for the file
     represented by the saved filehandle, as set by the SAVEFH
     operation, in the directory represented by the current filehandle.
     The existing file and the target directory must reside within the
     same filesystem on the server.  On success, the current filehandle
     will continue to be the target directory.  If an object exists in
     the target directory with the same name as newname, the server must
     return NFS4ERR_EXIST.

     For the target directory, the server returns change_info4
     information in cinfo.  With the atomic field of the change_info4
     struct, the server will indicate if the before and after change
     attributes were obtained atomically with respect to the link
     creation.

     If the newname has a length of 0 (zero), or if newname does not
     obey the UTF-8 definition, the error NFS4ERR_INVAL will be
     returned.




Expires: February 2003                                        [Page 148]


Draft Specification      NFS version 4 Protocol              August 2002


   IMPLEMENTATION

     Changes to any property of the "hard" linked files are reflected in
     all of the linked files.  When a link is made to a file, the
     attributes for the file should have a value for numlinks that is
     one greater than the value before the LINK operation.

     The statement "file and the target directory must reside within the
     same filesystem on the server" means that the fsid fields in the
     attributes for the objects are the same. If they reside on
     different filesystems, the error, NFS4ERR_XDEV, is returned.  On
     some servers, the filenames, "." and "..", are illegal as newname.

     In the case that newname is already linked to the file represented
     by the saved filehandle, the server will return NFS4ERR_EXIST.

     Note that symbolic links are created with the CREATE operation.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADNAME
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_DQUOT
     NFS4ERR_EXIST
     NFS4ERR_FHEXPIRED
     NFS4ERR_FILE_OPEN
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_ISDIR
     NFS4ERR_MLINK
     NFS4ERR_MOVED
     NFS4ERR_NAMETOOLONG
     NFS4ERR_NOENT
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOSPC
     NFS4ERR_NOTDIR
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_WRONGSEC
     NFS4ERR_XDEV






Expires: February 2003                                        [Page 149]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.10.  Operation 12: LOCK - Create Lock


   SYNOPSIS

     (cfh) locktype, reclaim, offset, length, locker -> stateid


   ARGUMENT

     struct open_to_lock_owner4 {
             seqid4          open_seqid;
             stateid4        open_stateid;
             seqid4          lock_seqid;
             lock_owner4     lock_owner;
     };

     struct exist_lock_owner4 {
             stateid4        lock_stateid;
             seqid4          lock_seqid;
     };

     union locker4 switch (bool new_lock_owner) {
      case TRUE:
             open_to_lock_owner4     open_owner;
      case FALSE:
             exist_lock_owner4       lock_owner;
     };

     enum nfs_lock_type4 {
             READ_LT         = 1,
             WRITE_LT        = 2,
             READW_LT        = 3,    /* blocking read */
             WRITEW_LT       = 4     /* blocking write */
     };

     struct LOCK4args {
             /* CURRENT_FH: file */
             nfs_lock_type4  locktype;
             bool            reclaim;
             offset4         offset;
             length4         length;
             locker4         locker;
     };


   RESULT

     struct LOCK4denied {
             offset4         offset;
             length4         length;
             nfs_lock_type4  locktype;


Expires: February 2003                                        [Page 150]


Draft Specification      NFS version 4 Protocol              August 2002


             lock_owner4     owner;
     };

     struct LOCK4resok {
             stateid4        lock_stateid;
     };

     union LOCK4res switch (nfsstat4 status) {
      case NFS4_OK:
              LOCK4resok     resok4;
      case NFS4ERR_DENIED:
              LOCK4denied    denied;
      default:
              void;
     };


   DESCRIPTION

     The LOCK operation requests a record lock for the byte range
     specified by the offset and length parameters.  The lock type is
     also specified to be one of the nfs_lock_type4s.  If this is a
     reclaim request, the reclaim parameter will be TRUE;

     Bytes in a file may be locked even if those bytes are not currently
     allocated to the file.  To lock the file from a specific offset
     through the end-of-file (no matter how long the file actually is)
     use a length field with all bits set to 1 (one).  If the length is
     zero, or if a length which is not all bits set to one is specified,
     and length when added to the offset exceeds the maximum 64-bit
     unsigned integer value, the error NFS4ERR_INVAL will result.

     Some servers may only support locking for byte offsets that fit
     within 32 bits.  If the client specifies a range that includes a
     byte beyond the last byte offset of the 32-bit range, but does not
     include the last byte offset of the 32-bit and all of the byte
     offsets beyond it, up to the end of the valid 64-bit range, such a
     32-bit server MUST return the error NFS4ERR_BAD_RANGE.

     In the case that the lock is denied, the owner, offset, and length
     of a conflicting lock are returned.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     If the server is unable to determine the exact offset and length of
     the conflicting lock, the same offset and length that were provided
     in the arguments should be returned in the denied results.  The
     File Locking section contains a full description of this and the
     other file locking operations.


Expires: February 2003                                        [Page 151]


Draft Specification      NFS version 4 Protocol              August 2002


     LOCK operations are subject to permission checks and to checks
     against the access type of the associated file.  However, the
     specific right and modes required for various type of locks,
     reflect the semantics of the server-exported filesystem, and are
     not specified by the protocol.  For example, Windows 2000 allows a
     write lock of a file open for READ, while a POSIX-compliant system
     does not.

     When the client makes a lock request that corresponds to a range
     that the lockowner has locked already (with the same or different
     lock type), or to a sub-region of such a range, or to a region
     which includes multiple locks already granted to that lockowner, in
     whole or in part, and the server does not support such locking
     operations (i.e. does not support POSIX locking semantics), the
     server will return the error NFS4ERR_LOCK_RANGE.  In that case, the
     client may return an error, or it may emulate the required
     operations, using only LOCK for ranges that do not include any
     bytes already locked by that lock_owner and LOCKU of locks held by
     that lock_owner (specifying an exactly-matching range and type).
     Similarly, when the client makes a lock request that amounts to
     upgrading (changing from a read lock to a write lock) or
     downgrading (changing from write lock to a read lock) an existing
     record lock, and the server does not support such a lock, the
     server will return NFS4ERR_LOCK_NOTSUPP.  Such operations may not
     perfectly reflect the required semantics in the face of conflicting
     lock requests from other clients.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_RANGE
     NFS4ERR_BAD_SEQID
     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_DEADLOCK
     NFS4ERR_DELAY
     NFS4ERR_DENIED
     NFS4ERR_EXPIRED
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_INVAL
     NFS4ERR_ISDIR
     NFS4ERR_LEASE_MOVED
     NFS4ERR_LOCK_NOTSUPP
     NFS4ERR_LOCK_RANGE
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NO_GRACE
     NFS4ERR_OLD_STATEID
     NFS4ERR_OPENMODE


Expires: February 2003                                        [Page 152]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_RECLAIM_BAD
     NFS4ERR_RECLAIM_CONFLICT
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_STALE_CLIENTID
     NFS4ERR_STALE_STATEID















































Expires: February 2003                                        [Page 153]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.11.  Operation 13: LOCKT - Test For Lock


   SYNOPSIS

     (cfh) locktype, offset, length owner -> {void, NFS4ERR_DENIED ->
     owner}

   ARGUMENT

     struct LOCKT4args {
             /* CURRENT_FH: file */
             nfs_lock_type4  locktype;
             offset4         offset;
             length4         length;
             lock_owner4     owner;
     };



   RESULT

     struct LOCK4denied {
             offset4         offset;
             length4         length;
             nfs_lock_type4  locktype;
             lock_owner4     owner;
     };

     union LOCKT4res switch (nfsstat4 status) {
      case NFS4ERR_DENIED:
              LOCK4denied    denied;
      case NFS4_OK:
              void;
      default:
              void;
     };


   DESCRIPTION

     The LOCKT operation tests the lock as specified in the arguments.
     If a conflicting lock exists, the owner, offset, length, and type
     of the conflicting lock are returned; if no lock is held, nothing
     other than NFS4_OK is returned.  Lock types READ_LT and READW_LT
     are processed in the same way in that a conflicting lock test is
     done without regard to blocking or non-blocking.  The same is true
     for WRITE_LT and WRITEW_LT.

     The ranges are specified as for LOCK.  The NFS4ERR_INVAL and
     NFS4ERR_BAD_RANGE errors are returned under the same circumstances
     as for LOCK.


Expires: February 2003                                        [Page 154]


Draft Specification      NFS version 4 Protocol              August 2002


     On success, the current filehandle retains its value.


   IMPLEMENTATION

     If the server is unable to determine the exact offset and length of
     the conflicting lock, the same offset and length that were provided
     in the arguments should be returned in the denied results.  The
     File Locking section contains further discussion of the file
     locking mechanisms.

     LOCKT uses a lock_owner4 rather a stateid4, as is used in LOCK to
     identify the owner.  This is because the client does not have to
     open the file to test for the existence of a lock, so a stateid may
     not be available.

     The test for conflicting locks should exclude locks for the current
     lockowner.  Note that since such locks are not examined the
     possible existence of overlapping ranges may not affect the results
     of LOCKT.  If the server does examine locks that match the
     lockowner for the purpose of range checking, NFS4ERR_LOCK_RANGE may
     be returned..  In the event that it returns NFS4_OK, clients may do
     a LOCK and receive NFS4ERR_LOCK_RANGE on the LOCK request because
     of the flexibility provided to the server.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_RANGE
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_DENIED
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_INVAL
     NFS4ERR_ISDIR
     NFS4ERR_LEASE_MOVED
     NFS4ERR_LOCK_RANGE
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_STALE_CLIENTID








Expires: February 2003                                        [Page 155]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.12.  Operation 14: LOCKU - Unlock File


   SYNOPSIS

     (cfh) type, seqid, stateid, offset, length -> stateid

   ARGUMENT

     struct LOCKU4args {
             /* CURRENT_FH: file */
             nfs_lock_type4  locktype;
             seqid4          seqid;
             stateid4        stateid;
             offset4         offset;
             length4         length;
     };


   RESULT

     union LOCKU4res switch (nfsstat4 status) {
      case   NFS4_OK:
              stateid4       stateid;
      default:
              void;
     };


   DESCRIPTION

     The LOCKU operation unlocks the record lock specified by the
     parameters. The client may set the locktype field to any value that
     is legal for the nfs_lock_type4 enumerated type, and the server
     MUST accept any legal value for locktype. Any legal value for
     locktype has no effect on the success or failure of the LOCKU
     operation.

     The ranges are specified as for LOCK.  The NFS4ERR_INVAL and
     NFS4ERR_BAD_RANGE errors are returned under the same circumstances
     as for LOCK.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     If the area to be unlocked does not correspond exactly to a lock
     actually held by the lockowner the server may return the error
     NFS4ERR_LOCK_RANGE.  This includes the case in which the area is
     not locked, where the area is a sub-range of the area locked, where
     it overlaps the area locked without matching exactly or the area


Expires: February 2003                                        [Page 156]


Draft Specification      NFS version 4 Protocol              August 2002


     specified includes multiple locks held by the lockowner.  In all of
     these cases, allowed by POSIX locking semantics, a client receiving
     this error, should if it desires support for such operations,
     simulate the operation using LOCKU on ranges corresponding to locks
     it actually holds, possibly followed by LOCK requests for the sub-
     ranges not being unlocked.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_RANGE
     NFS4ERR_BAD_SEQID
     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_EXPIRED
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_INVAL
     NFS4ERR_ISDIR
     NFS4ERR_LEASE_MOVED
     NFS4ERR_LOCK_RANGE
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_OLD_STATEID
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_STALE_CLIENTID
     NFS4ERR_STALE_STATEID























Expires: February 2003                                        [Page 157]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.13.  Operation 15: LOOKUP - Lookup Filename


   SYNOPSIS

     (cfh), component -> (cfh)


   ARGUMENT

     struct LOOKUP4args {
             /* CURRENT_FH: directory */
             component4      objname;
     };



   RESULT

     struct LOOKUP4res {
             /* CURRENT_FH: object */
             nfsstat4        status;
     };



   DESCRIPTION

     This operation LOOKUPs or finds a filesystem object using the
     directory specified by the current filehandle.  LOOKUP evaluates
     the component and if the object exists the current filehandle is
     replaced with the component's filehandle.

     If the component cannot be evaluated either because it does not
     exist or because the client does not have permission to evaluate
     the component, then an error will be returned and the current
     filehandle will be unchanged.

     If the component is a zero length string or if any component does
     not obey the UTF-8 definition, the error NFS4ERR_INVAL will be
     returned.


   IMPLEMENTATION

     If the client wants to achieve the effect of a multi-component
     lookup, it may construct a COMPOUND request such as (and obtain
     each filehandle):






Expires: February 2003                                        [Page 158]


Draft Specification      NFS version 4 Protocol              August 2002



             PUTFH  (directory filehandle)
             LOOKUP "pub"
             GETFH
             LOOKUP "foo"
             GETFH
             LOOKUP "bar"
             GETFH

     NFS version 4 servers depart from the semantics of previous NFS
     versions in allowing LOOKUP requests to cross mountpoints on the
     server.  The client can detect a mountpoint crossing by comparing
     the fsid attribute of the directory with the fsid attribute of the
     directory looked up.  If the fsids are different then the new
     directory is a server mountpoint.  UNIX clients that detect a
     mountpoint crossing will need to mount the server's filesystem.
     This needs to be done to maintain the file object identity checking
     mechanisms common to UNIX clients.

     Servers that limit NFS access to "shares" or "exported" filesystems
     should provide a pseudo-filesystem into which the exported
     filesystems can be integrated, so that clients can browse the
     server's name space.  The clients view of a pseudo filesystem will
     be limited to paths that lead to exported filesystems.

     Note: previous versions of the protocol assigned special semantics
     to the names "." and "..".  NFS version 4 assigns no special
     semantics to these names.  The LOOKUPP operator must be used to
     lookup a parent directory.

     Note that this operation does not follow symbolic links.  The
     client is responsible for all parsing of filenames including
     filenames that are modified by symbolic links encountered during
     the lookup process.

     If the current filehandle supplied is not a directory but a
     symbolic link, the error NFS4ERR_SYMLINK is returned as the error.
     For all other non-directory file types, the error NFS4ERR_NOTDIR is
     returned.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADNAME
     NFS4ERR_BADXDR
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED


Expires: February 2003                                        [Page 159]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_NAMETOOLONG
     NFS4ERR_NOENT
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTDIR
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_SYMLINK
     NFS4ERR_WRONGSEC













































Expires: February 2003                                        [Page 160]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.14.  Operation 16: LOOKUPP - Lookup Parent Directory


   SYNOPSIS

     (cfh) -> (cfh)

   ARGUMENT

     /* CURRENT_FH: object */
     void;


   RESULT

     struct LOOKUPP4res {
             /* CURRENT_FH: directory */
             nfsstat4        status;
     };

   DESCRIPTION

     The current filehandle is assumed to refer to a regular directory
     or a named attribute directory.  LOOKUPP assigns the filehandle for
     its parent directory to be the current filehandle.  If there is no
     parent directory an NFS4ERR_NOENT error must be returned.
     Therefore, NFS4ERR_NOENT will be returned by the server when the
     current filehandle is at the root or top of the server's file tree.


   IMPLEMENTATION

     As for LOOKUP, LOOKUPP will also cross mountpoints.

     If the current filehandle is not a directory or named attribute
     directory, the error NFS4ERR_NOTDIR is returned.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NOENT
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTDIR
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE


Expires: February 2003                                        [Page 161]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.15.  Operation 17: NVERIFY - Verify Difference in Attributes


   SYNOPSIS

     (cfh), fattr -> -

   ARGUMENT

     struct NVERIFY4args {
             /* CURRENT_FH: object */
             fattr4          obj_attributes;
     };


   RESULT

     struct NVERIFY4res {
             nfsstat4        status;
     };


   DESCRIPTION

     This operation is used to prefix a sequence of operations to be
     performed if one or more attributes have changed on some filesystem
     object.  If all the attributes match then the error NFS4ERR_SAME
     must be returned.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     This operation is useful as a cache validation operator.  If the
     object to which the attributes belong has changed then the
     following operations may obtain new data associated with that
     object.  For instance, to check if a file has been changed and
     obtain new data if it has:

             PUTFH  (public)
             LOOKUP "foobar"
             NVERIFY attrbits attrs
             READ 0 32767


     In the case that a recommended attribute is specified in the
     NVERIFY operation and the server does not support that attribute
     for the filesystem object, the error NFS4ERR_NOTSUPP is returned to
     the client.

   When the attribute rdattr_error or any write-only attribute (e.g.


Expires: February 2003                                        [Page 162]


Draft Specification      NFS version 4 Protocol              August 2002


   time_modify_set) is specified, the error NFS4ERR_INVAL is returned to
   the client.  If both of these conditions apply, the server is free to
   return either error.

   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_ATTRNOTSUPP
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_SAME
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
































Expires: February 2003                                        [Page 163]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.16.  Operation 18: OPEN - Open a Regular File


   SYNOPSIS

     (cfh), seqid, share_access, share_deny, owner, openhow, claim ->
     (cfh), stateid, cinfo, rflags, open_confirm, attrset delegation

   ARGUMENT

     struct OPEN4args {
             seqid4          seqid;
             uint32_t        share_access;
             uint32_t        share_deny;
             open_owner4     owner;
             openflag4       openhow;
             open_claim4     claim;
     };

     enum createmode4 {
             UNCHECKED4      = 0,
             GUARDED4        = 1,
             EXCLUSIVE4      = 2
     };

     union createhow4 switch (createmode4 mode) {
      case UNCHECKED4:
      case GUARDED4:
              fattr4         createattrs;
      case EXCLUSIVE4:
              verifier4      createverf;
     };

     enum opentype4 {
             OPEN4_NOCREATE  = 0,
             OPEN4_CREATE    = 1
     };

     union openflag4 switch (opentype4 opentype) {
      case OPEN4_CREATE:
              createhow4     how;
      default:
              void;
     };

     /* Next definitions used for OPEN delegation */
     enum limit_by4 {
             NFS_LIMIT_SIZE          = 1,
             NFS_LIMIT_BLOCKS        = 2
             /* others as needed */
     };



Expires: February 2003                                        [Page 164]


Draft Specification      NFS version 4 Protocol              August 2002


     struct nfs_modified_limit4 {
             uint32_t        num_blocks;
             uint32_t        bytes_per_block;
     };

     union nfs_space_limit4 switch (limit_by4 limitby) {
      /* limit specified as file size */
      case NFS_LIMIT_SIZE:
              uint64_t               filesize;
      /* limit specified by number of blocks */
      case NFS_LIMIT_BLOCKS:
              nfs_modified_limit4    mod_blocks;
     } ;

     enum open_delegation_type4 {
             OPEN_DELEGATE_NONE      = 0,
             OPEN_DELEGATE_READ      = 1,
             OPEN_DELEGATE_WRITE     = 2
     };

     enum open_claim_type4 {
             CLAIM_NULL              = 0,
             CLAIM_PREVIOUS          = 1,
             CLAIM_DELEGATE_CUR      = 2,
             CLAIM_DELEGATE_PREV     = 3
     };

     struct open_claim_delegate_cur4 {
             stateid4        delegate_stateid;
             component4      file;
     };

     union open_claim4 switch (open_claim_type4 claim) {
      /*
       * No special rights to file. Ordinary OPEN of the specified file.
       */
      case CLAIM_NULL:
              /* CURRENT_FH: directory */
              component4     file;

      /*
       * Right to the file established by an open previous to server
       * reboot.  File identified by filehandle obtained at that time
       * rather than by name.
       */
      case CLAIM_PREVIOUS:
              /* CURRENT_FH: file being reclaimed */
              open_delegation_type4   delegate_type;

      /*
       * Right to file based on a delegation granted by the server.
       * File is specified by name.


Expires: February 2003                                        [Page 165]


Draft Specification      NFS version 4 Protocol              August 2002


       */
      case CLAIM_DELEGATE_CUR:
              /* CURRENT_FH: directory */
              open_claim_delegate_cur4       delegate_cur_info;

      /* Right to file based on a delegation granted to a previous boot
       * instance of the client.  File is specified by name.
       */
      case CLAIM_DELEGATE_PREV:
              /* CURRENT_FH: directory */
              component4     file_delegate_prev;
     };



   RESULT

     struct open_read_delegation4 {
             stateid4        stateid;        /* Stateid for delegation*/
             bool            recall;         /* Pre-recalled flag for
                                                delegations obtained
                                                by reclaim
                                                (CLAIM_PREVIOUS) */
             nfsace4         permissions;    /* Defines users who don't
                                                need an ACCESS call to
                                                open for read */
     };

     struct open_write_delegation4 {
             stateid4        stateid;        /* Stateid for delegation*/
             bool            recall;         /* Pre-recalled flag for
                                                delegations obtained
                                                by reclaim
                                                (CLAIM_PREVIOUS) */
             nfs_space_limit4 space_limit;   /* Defines condition that
                                                the client must check to
                                                determine whether the
                                                file needs to be flushed
                                                to the server on close.
                                                */
             nfsace4         permissions;    /* Defines users who don't
                                                need an ACCESS call as
                                                part of a delegated
                                                open. */
     };

     union open_delegation4
     switch (open_delegation_type4 delegation_type) {
             case OPEN_DELEGATE_NONE:
                     void;
             case OPEN_DELEGATE_READ:
                     open_read_delegation4 read;


Expires: February 2003                                        [Page 166]


Draft Specification      NFS version 4 Protocol              August 2002


             case OPEN_DELEGATE_WRITE:
                     open_write_delegation4 write;
     };

     const OPEN4_RESULT_CONFIRM      = 0x00000002;
     const OPEN4_RESULT_LOCKTYPE_POSIX = 0x00000004;

     struct OPEN4resok {
             stateid4        stateid;        /* Stateid for open */
             change_info4    cinfo;          /* Directory Change Info */
             uint32_t        rflags;         /* Result flags */
             bitmap4         attrset;        /* attributes on create */
             open_delegation4 delegation;    /* Info on any open
                                                delegation */
     };

     union OPEN4res switch (nfsstat4 status) {
      case NFS4_OK:
             /* CURRENT_FH: opened file */
             OPEN4resok      resok4;
      default:
             void;
     };


   WARNING TO CLIENT IMPLEMENTORS

     OPEN resembles LOOKUP in that it generates a filehandle for the
     client to use.  Unlike LOOKUP though, OPEN creates server state on
     the filehandle.  In normal circumstances, the client can only
     release this state with a CLOSE operation.  CLOSE uses the current
     filehandle to determine which file to close.  Therefore the client
     MUST follow every OPEN operation with a GETFH operation in the same
     COMPOUND procedure.  This will supply the client with the
     filehandle such that CLOSE can be used appropriately.

     Simply waiting for the lease on the file to expire is insufficient
     because the server may maintain the state indefinitely as long as
     another client does not attempt to make a conflicting access to the
     same file.


   DESCRIPTION

     The OPEN operation creates and/or opens a regular file in a
     directory with the provided name.  If the file does not exist at
     the server and creation is desired, specification of the method of
     creation is provided by the openhow parameter.  The client has the
     choice of three creation methods: UNCHECKED, GUARDED, or EXCLUSIVE.

     If the current filehandle is a named attribute directory, OPEN will
     then create or open a named attribute file.  Note that exclusive


Expires: February 2003                                        [Page 167]


Draft Specification      NFS version 4 Protocol              August 2002


     create of a named attribute is not supported.  If the createmode is
     EXCLUSIVE4 and the current filehandle is a named attribute
     directory, the server will return EINVAL.

     UNCHECKED means that the file should be created if a file of that
     name does not exist and encountering an existing regular file of
     that name is not an error.  For this type of create, createattrs
     specifies the initial set of attributes for the file.  The set of
     attributes may include any writable attribute valid for regular
     files.  When an UNCHECKED create encounters an existing file, the
     attributes specified by createattrs are not used, except that when
     an size of zero is specified, the existing file is truncated.  If
     GUARDED is specified, the server checks for the presence of a
     duplicate object by name before performing the create.  If a
     duplicate exists, an error of NFS4ERR_EXIST is returned as the
     status.  If the object does not exist, the request is performed as
     described for UNCHECKED.  For each of these cases (UNCHECKED and
     GUARDED) where the operation is successful, the server will return
     to the client an attribute mask signifying which attributes were
     successfully set for the object.

     EXCLUSIVE specifies that the server is to follow exclusive creation
     semantics, using the verifier to ensure exclusive creation of the
     target.  The server should check for the presence of a duplicate
     object by name.  If the object does not exist, the server creates
     the object and stores the verifier with the object.  If the object
     does exist and the stored verifier matches the client provided
     verifier, the server uses the existing object as the newly created
     object.  If the stored verifier does not match, then an error of
     NFS4ERR_EXIST is returned.  No attributes may be provided in this
     case, since the server may use an attribute of the target object to
     store the verifier.  If the server uses an attribute to store the
     exclusive create verifier, it will signify which attribute by
     setting the appropriate bit in the attribute mask that is returned
     in the results.

     For the target directory, the server returns change_info4
     information in cinfo.  With the atomic field of the change_info4
     struct, the server will indicate if the before and after change
     attributes were obtained atomically with respect to the link
     creation.

     Upon successful creation, the current filehandle is replaced by
     that of the new object.

     The OPEN operation provides for Windows share reservation
     capability with the use of the access and deny fields of the OPEN
     arguments.  The client specifies at OPEN the required access and
     deny modes.  For clients that do not directly support SHAREs (i.e.
     UNIX), the expected deny value is DENY_NONE.  In the case that
     there is a existing SHARE reservation that conflicts with the OPEN
     request, the server returns the error NFS4ERR_SHARE_DENIED.  For a


Expires: February 2003                                        [Page 168]


Draft Specification      NFS version 4 Protocol              August 2002


     complete SHARE request, the client must provide values for the
     owner and seqid fields for the OPEN argument.  For additional
     discussion of SHARE semantics see the section on 'Share
     Reservations'.

     In the case that the client is recovering state from a server
     failure, the claim field of the OPEN argument is used to signify
     that the request is meant to reclaim state previously held.

     The "claim" field of the OPEN argument is used to specify the file
     to be opened and the state information which the client claims to
     possess.  There are four basic claim types which cover the various
     situations for an OPEN.  They are as follows:

     CLAIM_NULL
                           For the client, this is a new OPEN
                           request and there is no previous state
                           associate with the file for the client.

     CLAIM_PREVIOUS
                           The client is claiming basic OPEN state
                           for a file that was held previous to a
                           server reboot.  Generally used when a
                           server is returning persistent
                           filehandles; the client may not have the
                           file name to reclaim the OPEN.

     CLAIM_DELEGATE_CUR
                           The client is claiming a delegation for
                           OPEN as granted by the server.
                           Generally this is done as part of
                           recalling a delegation.

     CLAIM_DELEGATE_PREV
                           The client is claiming a delegation
                           granted to a previous client instance;
                           used after the client reboots. The
                           server MAY support CLAIM_DELEGATE_PREV.
                           If it does support CLAIM_DELEGATE_PREV,
                           SETCLIENTID_CONFIRM MUST NOT remove the
                           client's delegation state, and the
                           server MUST support the DELEGEPURGE
                           operation.


     For OPEN requests whose claim type is other than CLAIM_PREVIOUS
     (i.e. requests other than those devoted to reclaiming opens after a
     server reboot) that reach the server during its grace or lease
     expiration period, the server returns an error of NFS4ERR_GRACE.

     For any OPEN request, the server may return an open delegation,
     which allows further opens and closes to be handled locally on the
     client as described in the section Open Delegation.  Note that
     delegation is up to the server to decide.  The client should never
     assume that delegation will or will not be granted in a particular
     instance.  It should always be prepared for either case.  A partial


Expires: February 2003                                        [Page 169]


Draft Specification      NFS version 4 Protocol              August 2002


     exception is the reclaim (CLAIM_PREVIOUS) case, in which a
     delegation type is claimed.  In this case, delegation will always
     be granted, although the server may specify an immediate recall in
     the delegation structure.

     The rflags returned by a successful OPEN allow the server to return
     information governing how the open file is to be handled.
     OPEN4_RESULT_CONFIRM indicates that the client MUST execute an
     OPEN_CONFIRM operation before using the open file.
     OPEN4_RESULT_LOCKTYPE_POSIX indicates the server's file locking
     behavior is Posix like with respect to lock range coalescing.  From
     this the client can choose to manage file locking state in a way to
     handle a mis-match of file locking management.

     If the component is of zero length, NFS4ERR_INVAL will be returned.
     The component is also subject to the normal UTF-8, character
     support, and name checks.  See the section "UTF-8 Related Errors"
     for further discussion.

     When an OPEN is done and the specified lockowner already has the
     resulting filehandle open, the result is to "OR" together the new
     share and deny status together with the existing status.  In this
     case, only a single CLOSE need be done, even though multiple OPEN's
     were completed.  When such an OPEN is done, checking of share
     reservations for the new OPEN proceeds normally, with no exception
     for the existing OPEN held by the same lockowner.

     If the underlying filesystem at the server is only accessible in a
     read-only mode and the OPEN request has specified ACCESS_WRITE or
     ACCESS_BOTH, the server will return NFS4ERR_ROFS to indicate a
     read-only filesystem.

     As with the CREATE operation, the server MUST derive the owner,
     owner ACE, group, or group ACE if any of the four attributes are
     required and supported by the server's filesystem.  For an OPEN
     with the EXCLUSIVE4 createmode, the server has no choice, since
     such OPEN calls do not include the createattrs field.  Conversely,
     if createattrs is specified, and includes owner or group (or
     corresponding ACEs) that the principal in the RPC call's
     credentials does not have authorization to create files for, then
     the server may return NFS4ERR_PERM.

     In the case of a OPEN which specifies a size of zero (e.g.
     truncation) and the file has named attributes, the named attributes
     are left as is.  They are not removed.


   IMPLEMENTATION

     The OPEN operation contains support for EXCLUSIVE create.  The
     mechanism is similar to the support in NFS version 3 [RFC1813].  As
     in NFS version 3, this mechanism provides reliable exclusive


Expires: February 2003                                        [Page 170]


Draft Specification      NFS version 4 Protocol              August 2002


     creation.  Exclusive create is invoked when the how parameter is
     EXCLUSIVE.  In this case, the client provides a verifier that can
     reasonably be expected to be unique.  A combination of a client
     identifier, perhaps the client network address, and a unique number
     generated by the client, perhaps the RPC transaction identifier,
     may be appropriate.

     If the object does not exist, the server creates the object and
     stores the verifier in stable storage. For filesystems that do not
     provide a mechanism for the storage of arbitrary file attributes,
     the server may use one or more elements of the object meta-data to
     store the verifier. The verifier must be stored in stable storage
     to prevent erroneous failure on retransmission of the request. It
     is assumed that an exclusive create is being performed because
     exclusive semantics are critical to the application. Because of the
     expected usage, exclusive CREATE does not rely solely on the
     normally volatile duplicate request cache for storage of the
     verifier. The duplicate request cache in volatile storage does not
     survive a crash and may actually flush on a long network partition,
     opening failure windows.  In the UNIX local filesystem environment,
     the expected storage location for the verifier on creation is the
     meta-data (time stamps) of the object. For this reason, an
     exclusive object create may not include initial attributes because
     the server would have nowhere to store the verifier.

     If the server can not support these exclusive create semantics,
     possibly because of the requirement to commit the verifier to
     stable storage, it should fail the OPEN request with the error,
     NFS4ERR_NOTSUPP.

     During an exclusive CREATE request, if the object already exists,
     the server reconstructs the object's verifier and compares it with
     the verifier in the request. If they match, the server treats the
     request as a success. The request is presumed to be a duplicate of
     an earlier, successful request for which the reply was lost and
     that the server duplicate request cache mechanism did not detect.
     If the verifiers do not match, the request is rejected with the
     status, NFS4ERR_EXIST.

     Once the client has performed a successful exclusive create, it
     must issue a SETATTR to set the correct object attributes.  Until
     it does so, it should not rely upon any of the object attributes,
     since the server implementation may need to overload object meta-
     data to store the verifier.  The subsequent SETATTR must not occur
     in the same COMPOUND request as the OPEN.  This separation will
     guarantee that the exclusive create mechanism will continue to
     function properly in the face of retransmission of the request.

     Use of the GUARDED attribute does not provide exactly-once
     semantics.  In particular, if a reply is lost and the server does
     not detect the retransmission of the request, the operation can
     fail with NFS4ERR_EXIST, even though the create was performed


Expires: February 2003                                        [Page 171]


Draft Specification      NFS version 4 Protocol              August 2002


     successfully.  The client would use this behavior in the case that
     the application has not requested an exclusive create but has asked
     to have the file truncated when the file is opened.  In the case of
     the client timing out and retransmitting the create request, the
     client can use GUARDED to prevent against a sequence like: create,
     write, create (retransmitted) from occurring.

     For SHARE reservations, the client must specify a value for access
     that is one of READ, WRITE, or BOTH.  For deny, the client must
     specify one of NONE, READ, WRITE, or BOTH.  If the client fails to
     do this, the server must return NFS4ERR_INVAL.

     Based on the access value (READ, WRITE, or BOTH) the client should
     check that the requestor has the proper access rights to perform
     the specified operation.  This would generally be the results of
     applying the ACL access rules to the file for the current
     requestor.  However, just as with the ACCESS operation, the client
     should not attempt to second-guess the server's decisions, as
     access rights may change and may be subject to server
     administrative controls outside the ACL framework.  If the
     requestor is not authorized to READ or WRITE (depending on the
     access value), the server must return NFS4ERR_ACCESS.  Note that
     since the NFS version 4 protocol does not impose any requirement
     that READ's and WRITE's issued for an open file have the same
     credentials as the OPEN itself, the server still must do
     appropriate access checking on the READ's and WRITE's themselves.

     If the component provided to OPEN is a symbolic link, the error
     NFS4ERR_SYMLINK will be returned to the client.  If the current
     filehandle is not a directory, the error NFS4ERR_NOTDIR will be
     returned.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_ATTRNOTSUPP
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADNAME
     NFS4ERR_BADOWNER
     NFS4ERR_BAD_SEQID
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_DQUOT
     NFS4ERR_EXIST
     NFS4ERR_EXPIRED
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_IO
     NFS4ERR_ISDIR
     NFS4ERR_LEASE_MOVED


Expires: February 2003                                        [Page 172]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_MOVED
     NFS4ERR_NAMETOOLONG
     NFS4ERR_NOENT
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOSPC
     NFS4ERR_NOTDIR
     NFS4ERR_NOTSUPP
     NFS4ERR_NO_GRACE
     NFS4ERR_RECLAIM_BAD
     NFS4ERR_RECLAIM_CONFLICT
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_SHARE_DENIED
     NFS4ERR_STALE_CLIENTID
     NFS4ERR_SYMLINK
     NFS4ERR_WRONGSEC





































Expires: February 2003                                        [Page 173]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.17.  Operation 19: OPENATTR - Open Named Attribute Directory


   SYNOPSIS

     (cfh) createdir -> (cfh)

   ARGUMENT

     struct OPENATTR4args {
             /* CURRENT_FH: object */
             bool    createdir;
     };


   RESULT

     struct OPENATTR4res {
             /* CURRENT_FH: named attr directory*/
             nfsstat4        status;
     };


   DESCRIPTION

     The OPENATTR operation is used to obtain the filehandle of the
     named attribute directory associated with the current filehandle.
     The result of the OPENATTR will be a filehandle to an object of
     type NF4ATTRDIR.  From this filehandle, READDIR and LOOKUP
     operations can be used to obtain filehandles for the various named
     attributes associated with the original filesystem object.
     Filehandles returned within the named attribute directory will have
     a type of NF4NAMEDATTR.

     The createdir argument allows the client to signify if a named
     attribute directory should be created as a result of the OPENATTR
     operation.  Some clients may use the OPENATTR operation with a
     value of FALSE for createdir to determine if any named attributes
     exist for the object.  If none exist, then NFS4ERR_NOENT will be
     returned.  If createdir has a value of TRUE and no named attribute
     directory exists, one is created.  The creation of a named
     attribute directory assumes that the server has implemented named
     attribute support in this fashion and is not required to do so by
     this definition.


   IMPLEMENTATION

     If the server does not support named attributes for the current
     filehandle, an error of NFS4ERR_NOTSUPP will be returned to the
     client.



Expires: February 2003                                        [Page 174]


Draft Specification      NFS version 4 Protocol              August 2002


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NOENT
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOSPC
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_WRONGSEC



































Expires: February 2003                                        [Page 175]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.18.  Operation 20: OPEN_CONFIRM - Confirm Open


   SYNOPSIS

     (cfh), seqid, stateid-> stateid

   ARGUMENT

     struct OPEN_CONFIRM4args {
             /* CURRENT_FH: opened file */
             seqid4          seqid;
             stateid4        stateid;
     };


   RESULT

     struct OPEN_CONFIRM4resok {
             stateid4        stateid;
     };

     union OPEN_CONFIRM4res switch (nfsstat4 status) {
      case NFS4_OK:
              OPEN_CONFIRM4resok     resok4;
      default:
              void;
     };


   DESCRIPTION

     This operation is used to confirm the sequence id usage for the
     first time that a open_owner is used by a client.  The stateid
     returned from the OPEN operation is used as the argument for this
     operation along with the next sequence id for the open_owner.  The
     sequence id passed to the OPEN_CONFIRM must be 1 (one) greater than
     the seqid passed to the OPEN operation from which the open_confirm
     value was obtained.  If the server receives an unexpected sequence
     id with respect to the original open, then the server assumes that
     the client will not confirm the original OPEN and all state
     associated with the original OPEN is released by the server.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     A given client might generate many open_owner4 data structures for
     a given clientid.  The client will periodically either dispose of
     its open_owner4s or stop using them for indefinite periods of time.
     The latter situation is why the NFS version 4 protocol does not


Expires: February 2003                                        [Page 176]


Draft Specification      NFS version 4 Protocol              August 2002


     have an explicit operation to exit an open_owner4: such an
     operation is of no use in that situation.  Instead, to avoid
     unbounded memory use, the server needs to implement a strategy for
     disposing of open_owner4s that have no current lock, open, or
     delegation state for any files and have not been used recently.
     The time period used to determine when to dispose of open_owner4s
     is an implementation choice.  The time period should certainly be
     no less than the lease time plus any grace period the server wishes
     to implement beyond a lease time.  The OPEN_CONFIRM operation
     allows the server to safely dispose of unused open_owner4 data
     structures.

     In the case that a client issues an OPEN operation and the server
     no longer has a record of the open_owner4, the server needs ensure
     that this is a new OPEN and not a replay or retransmission.

     Servers must not require confirmation on OPEN's that grant
     delegations or are doing reclaim operations.  See section "Use of
     Open Confirmation" for details.  The server can easily avoid this
     by noting whether it has disposed of one open_owner4 for the given
     clientid.  If the server does not support delegation, it might
     simply maintain a single bit that notes whether any open_owner4
     (for any client) has been disposed of.

     The server must hold unconfirmed OPEN state until one of three
     events occur.  First, the client sends an OPEN_CONFIRM request with
     the appropriate sequence id and stateid within the lease period.
     In this case, the OPEN state on the server goes to confirmed, and
     the open_owner4 on the server is fully established.

     Second, the client sends another OPEN request with a sequence id
     that is incorrect for the open_owner4 (out of sequence).  In this
     case, the server assumes the second OPEN request is valid and the
     first one is a replay.  The server cancels the OPEN state of the
     first OPEN request, establishes an unconfirmed OPEN state for the
     second OPEN request, and responds to the second OPEN request with
     an indication that an OPEN_CONFIRM is needed.  The process then
     repeats itself.  While there is a potential for a denial of service
     attack on the client, it is mitigated if the client and server
     require the use of a security flavor based on Kerberos V5, LIPKEY,
     or some other flavor that uses cryptography.

     What if the server is in the unconfirmed OPEN state for a given
     open_owner4, and it receives an operation on the open_owner4 that
     has a stateid but the operation is not OPEN, or it is OPEN_CONFIRM
     but with the wrong stateid?  Then, even if the seqid is correct,
     the server returns NFS4ERR_BAD_STATEID, because the server assumes
     the operation is a replay: if the server has no established OPEN
     state, then there is no way, for example, a LOCK operation could be
     valid.

     Third, neither of the two aforementioned events occur for the


Expires: February 2003                                        [Page 177]


Draft Specification      NFS version 4 Protocol              August 2002


     open_owner4 within the lease period.  In this case, the OPEN state
     is cancelled and disposal of the open_owner4 can occur.


   ERRORS

     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_SEQID
     NFS4ERR_BADXDR
     NFS4ERR_EXPIRED
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_INVAL
     NFS4ERR_ISDIR
     NFS4ERR_MOVED
     NFS4ERR_NOENT
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE

































Expires: February 2003                                        [Page 178]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.19.  Operation 21: OPEN_DOWNGRADE - Reduce Open File Access


   SYNOPSIS

     (cfh), stateid, seqid, access, deny -> stateid

   ARGUMENT

     struct OPEN_DOWNGRADE4args {
             /* CURRENT_FH: opened file */
             stateid4        stateid;
             seqid4          seqid;
             uint32_t        share_access;
             uint32_t        share_deny;
     };


   RESULT

     struct OPEN_DOWNGRADE4resok {
             stateid4        stateid;
     };

     union OPEN_DOWNGRADE4res switch(nfsstat4 status) {
      case NFS4_OK:
             OPEN_DOWNGRADE4resok    resok4;
      default:
             void;
     };


   DESCRIPTION

     This operation is used to adjust the access and deny bits for a
     given open.  This is necessary when a given lockowner opens the
     same file multiple times with different access and deny flags.  In
     this situation, a close of one of the open's may change the
     appropriate access and deny flags to remove bits associated with
     open's no longer in effect.

     The access and deny bits specified in this operation replace the
     current ones for the specified open file.  The access and deny bits
     specified must be exactly equal to the union of the access and deny
     bits specified for some subset of the OPEN's in effect for current
     openowner on the current file.  If that constraint is not
     respected, the error NFS4ERR_INVAL should be returned.  Since
     access and deny bits are subsets of those already granted, it is
     not possible for this request to be denied because of conflicting
     share reservations.

     On success, the current filehandle retains its value.


Expires: February 2003                                        [Page 179]


Draft Specification      NFS version 4 Protocol              August 2002


   ERRORS

     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_SEQID
     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_EXPIRED
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_OLD_STATEID
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_STALE_STATEID






































Expires: February 2003                                        [Page 180]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.20.  Operation 22: PUTFH - Set Current Filehandle


   SYNOPSIS

     filehandle -> (cfh)

   ARGUMENT

     struct PUTFH4args {
             nfs_fh4         object;
     };


   RESULT

     struct PUTFH4res {
             /* CURRENT_FH: */
             nfsstat4        status;
     };


   DESCRIPTION

     Replaces the current filehandle with the filehandle provided as an
     argument.

     If the security mechanism used by the requestor does not meet the
     requirements of the filehandle provided to this operation, the
     server MUST return NFS4ERR_WRONGSEC.


   IMPLEMENTATION

     Commonly used as the first operator in an NFS request to set the
     context for following operations.


   ERRORS

     NFS4ERR_BADHANDLE
     NFS4ERR_BADXDR
     NFS4ERR_FHEXPIRED
     NFS4ERR_MOVED
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_WRONGSEC






Expires: February 2003                                        [Page 181]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.21.  Operation 23: PUTPUBFH - Set Public Filehandle


   SYNOPSIS

     - -> (cfh)

   ARGUMENT

     void;


   RESULT

     struct PUTPUBFH4res {
             /* CURRENT_FH: public fh */
             nfsstat4        status;
     };


   DESCRIPTION

     Replaces the current filehandle with the filehandle that represents
     the public filehandle of the server's name space.  This filehandle
     may be different from the "root" filehandle which may be associated
     with some other directory on the server.

     The public filehandle represents the concepts embodied in
     [RFC2054], [RFC2055], [RFC2224].  The intent for NFS version 4 is
     that the public filehandle (represented by the PUTPUBFH operation)
     be used as a method of providing WebNFS server compatibility with
     NFS versions 2 and 3.

     The public filehandle and the root filehandle (represented by the
     PUTROOTFH operation) should be equivalent.  If the public and root
     filehandles are not equivalent, then the public filehandle MUST be
     a descendant of the root filehandle.


   IMPLEMENTATION

     Used as the first operator in an NFS request to set the context for
     following operations.

     With the NFS version 2 and 3 public filehandle, the client is able
     to specify whether the path name provided in the LOOKUP should be
     evaluated as either an absolute path relative to the server's root
     or relative to the public filehandle.  [RFC2224] contains further
     discussion of the functionality.  With NFS version 4, that type of
     specification is not directly available in the LOOKUP operation.
     The reason for this is because the component separators needed to
     specify absolute vs. relative are not allowed in NFS version 4.


Expires: February 2003                                        [Page 182]


Draft Specification      NFS version 4 Protocol              August 2002


     Therefore, the client is responsible for constructing its request
     such that the use of either PUTROOTFH or PUTPUBFH are used to
     signify absolute or relative evaluation of an NFS URL respectively.

     Note that there are warnings mentioned in [RFC2224] with respect to
     the use of absolute evaluation and the restrictions the server may
     place on that evaluation with respect to how much of its namespace
     has been made available.  These same warnings apply to NFS version
     4.  It is likely, therefore that because of server implementation
     details, an NFS version 3 absolute public filehandle lookup may
     behave differently than an NFS version 4 absolute resolution.

     There is a form of security negotiation as described in [RFC2755]
     that uses the public filehandle a method of employing SNEGO.  This
     method is not available with NFS version 4 as filehandles are not
     overloaded with special meaning and therefore do not provide the
     same framework as NFS versions 2 and 3.  Clients should therefore
     use the security negotiation mechanisms described in this RFC.


   ERRORS

     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_WRONGSEC





























Expires: February 2003                                        [Page 183]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.22.  Operation 24: PUTROOTFH - Set Root Filehandle


   SYNOPSIS

     - -> (cfh)

   ARGUMENT

     void;


   RESULT

     struct PUTROOTFH4res {
             /* CURRENT_FH: root fh */
             nfsstat4        status;
     };


   DESCRIPTION

     Replaces the current filehandle with the filehandle that represents
     the root of the server's name space.  From this filehandle a LOOKUP
     operation can locate any other filehandle on the server. This
     filehandle may be different from the "public" filehandle which may
     be associated with some other directory on the server.


   IMPLEMENTATION

     Commonly used as the first operator in an NFS request to set the
     context for following operations.


   ERRORS

     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_WRONGSEC














Expires: February 2003                                        [Page 184]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.23.  Operation 25: READ - Read from File


   SYNOPSIS

     (cfh), stateid, offset, count -> eof, data

   ARGUMENT

     struct READ4args {
             /* CURRENT_FH: file */
             stateid4        stateid;
             offset4         offset;
             count4          count;
     };


   RESULT

     struct READ4resok {
             bool            eof;
             opaque          data<>;
     };

     union READ4res switch (nfsstat4 status) {
      case NFS4_OK:
              READ4resok     resok4;
      default:
              void;
     };


   DESCRIPTION

     The READ operation reads data from the regular file identified by
     the current filehandle.

     The client provides an offset of where the READ is to start and a
     count of how many bytes are to be read.  An offset of 0 (zero)
     means to read data starting at the beginning of the file.  If
     offset is greater than or equal to the size of the file, the
     status, NFS4_OK, is returned with a data length set to 0 (zero) and
     eof is set to TRUE.  The READ is subject to access permissions
     checking.

     If the client specifies a count value of 0 (zero), the READ
     succeeds and returns 0 (zero) bytes of data again subject to access
     permissions checking.  The server may choose to return fewer bytes
     than specified by the client.  The client needs to check for this
     condition and handle the condition appropriately.

     The stateid value for a READ request represents a value returned


Expires: February 2003                                        [Page 185]


Draft Specification      NFS version 4 Protocol              August 2002


     from a previous record lock or share reservation request.  The
     stateid is used by the server to verify that the associated share
     reservation and any record locks are still valid and to update
     lease timeouts for the client.

     If the read ended at the end-of-file (formally, in a correctly
     formed READ request, if offset + count is equal to the size of the
     file), or the read request extends beyond the size of the file (if
     offset + count is greater than the size of the file), eof is
     returned as TRUE; otherwise it is FALSE.  A successful READ of an
     empty file will always return eof as TRUE.

     If the current filehandle is not a regular file, an error will be
     returned to the client.  In the case the current filehandle
     represents a directory, NFS4ERR_ISDIR is return; otherwise,
     NFS4ERR_INVAL is returned.

     For a READ with a stateid value of all bits 0, the server MAY allow
     the READ to be serviced subject to mandatory file locks or the
     current share deny modes for the file.  For a READ with a stateid
     value of all bits 1, the server MAY allow READ operations to bypass
     locking checks at the server.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     It is possible for the server to return fewer than count bytes of
     data.  If the server returns less than the count requested and eof
     is set to FALSE, the client should issue another READ to get the
     remaining data.  A server may return less data than requested under
     several circumstances.  The file may have been truncated by another
     client or perhaps on the server itself, changing the file size from
     what the requesting client believes to be the case.  This would
     reduce the actual amount of data available to the client.  It is
     possible that the server may back off the transfer size and reduce
     the read request return.  Server resource exhaustion may also occur
     necessitating a smaller read return.

     If mandatory file locking is on for the file, and if the region
     corresponding to the data to be read from file is write locked by
     an owner not associated the stateid, server will return an
     NFS4ERR_LOCKED error.  The client should try to get appropriate
     read record lock via the LOCK operation before re-attempting the
     READ. When the READ completes, the client should release the record
     lock via LOCKU.


   ERRORS

     NFS4ERR_ACCESS


Expires: February 2003                                        [Page 186]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_EXPIRED
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_ISDIR
     NFS4ERR_LEASE_MOVED
     NFS4ERR_LOCKED
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NXIO
     NFS4ERR_OLD_STATEID
     NFS4ERR_OPENMODE
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_STALE_STATEID

































Expires: February 2003                                        [Page 187]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.24.  Operation 26: READDIR - Read Directory


   SYNOPSIS
      (cfh), cookie, cookieverf, dircount, maxcount, attr_request ->
      cookieverf { cookie, name, attrs }

   ARGUMENT

     struct READDIR4args {
             /* CURRENT_FH: directory */
             nfs_cookie4     cookie;
             verifier4       cookieverf;
             count4          dircount;
             count4          maxcount;
             bitmap4         attr_request;
     };


   RESULT

     struct entry4 {
             nfs_cookie4     cookie;
             component4      name;
             fattr4          attrs;
             entry4          *nextentry;
     };

     struct dirlist4 {
             entry4          *entries;
             bool            eof;
     };

     struct READDIR4resok {
             verifier4       cookieverf;
             dirlist4        reply;
     };


     union READDIR4res switch (nfsstat4 status) {
      case NFS4_OK:
              READDIR4resok  resok4;
      default:
              void;
     };


   DESCRIPTION

     The READDIR operation retrieves a variable number of entries from a
     filesystem directory and returns client requested attributes for
     each entry along with information to allow the client to request


Expires: February 2003                                        [Page 188]


Draft Specification      NFS version 4 Protocol              August 2002


     additional directory entries in a subsequent READDIR.

     The arguments contain a cookie value that represents where the
     READDIR should start within the directory.  A value of 0 (zero) for
     the cookie is used to start reading at the beginning of the
     directory.  For subsequent READDIR requests, the client specifies a
     cookie value that is provided by the server on a previous READDIR
     request.

     The cookieverf value should be set to 0 (zero) when the cookie
     value is 0 (zero) (first directory read).  On subsequent requests,
     it should be a cookieverf as returned by the server.  The
     cookieverf must match that returned by the READDIR in which the
     cookie was acquired.  If the server determines that the cookieverf
     is no longer valid for the directory, the error NFS4ERR_NOT_SAME
     must be returned.

     The dircount portion of the argument is a hint of the maximum
     number of bytes of directory information that should be returned.
     This value represents the length of the names of the directory
     entries and the cookie value for these entries.  This length
     represents the XDR encoding of the data (names and cookies) and not
     the length in the native format of the server.

     The maxcount value of the argument is the maximum number of bytes
     for the result.  This maximum size represents all of the data being
     returned within the READDIR4resok structure and includes the XDR
     overhead.  The server may return less data.  If the server is
     unable to return a single directory entry within the maxcount
     limit, the error NFS4ERR_READDIR_NOSPC will be returned to the
     client.

     Finally, attrbits represents the list of attributes to be returned
     for each directory entry supplied by the server.

     On successful return, the server's response will provide a list of
     directory entries.  Each of these entries contains the name of the
     directory entry, a cookie value for that entry, and the associated
     attributes as requested.  The "eof" flag has a value of TRUE if
     there are no more entries in the directory.

     The cookie value is only meaningful to the server and is used as a
     "bookmark" for the directory entry.  As mentioned, this cookie is
     used by the client for subsequent READDIR operations so that it may
     continue reading a directory.  The cookie is similar in concept to
     a READ offset but should not be interpreted as such by the client.
     Ideally, the cookie value should not change if the directory is
     modified since the client may be caching these values.

     In some cases, the server may encounter an error while obtaining
     the attributes for a directory entry.  Instead of returning an
     error for the entire READDIR operation, the server can instead


Expires: February 2003                                        [Page 189]


Draft Specification      NFS version 4 Protocol              August 2002


     return the attribute 'fattr4_rdattr_error'.  With this, the server
     is able to communicate the failure to the client and not fail the
     entire operation in the instance of what might be a transient
     failure.  Obviously, the client must request the
     fattr4_rdattr_error attribute for this method to work properly.  If
     the client does not request the attribute, the server has no choice
     but to return failure for the entire READDIR operation.

     For some filesystem environments, the directory entries "." and
     ".."  have special meaning and in other environments, they may not.
     If the server supports these special entries within a directory,
     they should not be returned to the client as part of the READDIR
     response.  To enable some client environments, the cookie values of
     0, 1, and 2 are to be considered reserved.  Note that the UNIX
     client will use these values when combining the server's response
     and local representations to enable a fully formed UNIX directory
     presentation to the application.

     For READDIR arguments, cookie values of 1 and 2 should not be used
     and for READDIR results cookie values of 0, 1, and 2 should not
     returned.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     The server's filesystem directory representations can differ
     greatly.  A client's programming interfaces may also be bound to
     the local operating environment in a way that does not translate
     well into the NFS protocol.  Therefore the use of the dircount and
     maxcount fields are provided to allow the client the ability to
     provide guidelines to the server.  If the client is aggressive
     about attribute collection during a READDIR, the server has an idea
     of how to limit the encoded response.  The dircount field provides
     a hint on the number of entries based solely on the names of the
     directory entries.  Since it is a hint, it may be possible that a
     dircount value is zero.  In this case, the server is free to ignore
     the dircount value and return directory information based on the
     specified maxcount value.

     The cookieverf may be used by the server to help manage cookie
     values that may become stale.  It should be a rare occurrence that
     a server is unable to continue properly reading a directory with
     the provided cookie/cookieverf pair.  The server should make every
     effort to avoid this condition since the application at the client
     may not be able to properly handle this type of failure.

     The use of the cookieverf will also protect the client from using
     READDIR cookie values that may be stale.  For example, if the file
     system has been migrated, the server may or may not be able to use
     the same cookie values to service READDIR as the previous server


Expires: February 2003                                        [Page 190]


Draft Specification      NFS version 4 Protocol              August 2002


     used.  With the client providing the cookieverf, the server is able
     to provide the appropriate response to the client.  This prevents
     the case where the server may accept a cookie value but the
     underlying directory has changed and the response is invalid from
     the client's context of its previous READDIR.

     Since some servers will not be returning "." and ".." entries as
     has been done with previous versions of the NFS protocol, the
     client that requires these entries be present in READDIR responses
     must fabricate them.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_COOKIE
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTDIR
     NFS4ERR_NOTSUPP
     NFS4ERR_NOT_SAME
     NFS4ERR_READDIR_NOSPC
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_TOOSMALL






















Expires: February 2003                                        [Page 191]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.25.  Operation 27: READLINK - Read Symbolic Link


   SYNOPSIS

     (cfh) -> linktext

   ARGUMENT

     /* CURRENT_FH: symlink */
     void;


   RESULT

     struct READLINK4resok {
             linktext4       link;
     };

     union READLINK4res switch (nfsstat4 status) {
      case NFS4_OK:
              READLINK4resok resok4;
      default:
              void;
     };


   DESCRIPTION

     READLINK reads the data associated with a symbolic link.  The data
     is a UTF-8 string that is opaque to the server.  That is, whether
     created by an NFS client or created locally on the server, the data
     in a symbolic link is not interpreted when created, but is simply
     stored.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     A symbolic link is nominally a pointer to another file.  The data
     is not necessarily interpreted by the server, just stored in the
     file.  It is possible for a client implementation to store a path
     name that is not meaningful to the server operating system in a
     symbolic link.  A READLINK operation returns the data to the client
     for interpretation. If different implementations want to share
     access to symbolic links, then they must agree on the
     interpretation of the data in the symbolic link.

     The READLINK operation is only allowed on objects of type NF4LNK.
     The server should return the error, NFS4ERR_INVAL, if the object is
     not of type, NF4LNK.


Expires: February 2003                                        [Page 192]


Draft Specification      NFS version 4 Protocol              August 2002


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_DELAY
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE








































Expires: February 2003                                        [Page 193]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.26.  Operation 28: REMOVE - Remove Filesystem Object


   SYNOPSIS

     (cfh), filename -> change_info

   ARGUMENT

     struct REMOVE4args {
             /* CURRENT_FH: directory */
             component4       target;
     };


   RESULT

     struct REMOVE4resok {
             change_info4    cinfo;
     }

     union REMOVE4res switch (nfsstat4 status) {
      case NFS4_OK:
              REMOVE4resok   resok4;
      default:
              void;
     }


   DESCRIPTION

     The REMOVE operation removes (deletes) a directory entry named by
     filename from the directory corresponding to the current
     filehandle.  If the entry in the directory was the last reference
     to the corresponding filesystem object, the object may be
     destroyed.

     For the directory where the filename was removed, the server
     returns change_info4 information in cinfo.  With the atomic field
     of the change_info4 struct, the server will indicate if the before
     and after change attributes were obtained atomically with respect
     to the removal.

     If the target has a length of 0 (zero), or if target does not obey
     the UTF-8 definition, the error NFS4ERR_INVAL will be returned.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     NFS versions 2 and 3 required a different operator RMDIR for


Expires: February 2003                                        [Page 194]


Draft Specification      NFS version 4 Protocol              August 2002


     directory removal and REMOVE for non-directory removal. This
     allowed clients to skip checking the file type when being passed a
     non-directory delete system call (e.g. unlink() in POSIX) to remove
     a directory, as well as the converse (e.g. a rmdir() on a non-
     directory) because they knew the server would check the file type.
     NFS version 4 REMOVE can be used to delete any directory entry
     independent of its file type. The implementor of an NFS version 4
     client's entry points from the unlink() and rmdir() system calls
     should first check the file type against the types the system call
     is allowed to remove before issuing a REMOVE. Alternatively, the
     implementor can produce a COMPOUND call that includes a
     LOOKUP/VERIFY sequence to verify the file type before a REMOVE
     operation in the same COMPOUND call.

     The concept of last reference is server specific. However, if the
     numlinks field in the previous attributes of the object had the
     value 1, the client should not rely on referring to the object via
     a filehandle. Likewise, the client should not rely on the resources
     (disk space, directory entry, and so on) formerly associated with
     the object becoming immediately available.  Thus, if a client needs
     to be able to continue to access a file after using REMOVE to
     remove it, the client should take steps to make sure that the file
     will still be accessible.  The usual mechanism used is to RENAME
     the file from its old name to a new hidden name.

     If the server finds that the file is still open when the REMOVE
     arrives:

   o The server SHOULD NOT delete the file's directory entry if the file
     was opened with OPEN4_SHARE_DENY_WRITE or OPEN4_SHARE_DENY_BOTH.

   o If the file was not opened with OPEN4_SHARE_DENY_WRITE or
     OPEN4_SHARE_DENY_BOTH, the server SHOULD delete the file's
     directory.  However, until last CLOSE of the file, the server MAY
     continue to allow access to the file via its filehandle.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADNAME
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_FHEXPIRED
     NFS4ERR_FILE_OPEN
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NAMETOOLONG
     NFS4ERR_NOENT


Expires: February 2003                                        [Page 195]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTDIR
     NFS4ERR_NOTEMPTY
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE














































Expires: February 2003                                        [Page 196]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.27.  Operation 29: RENAME - Rename Directory Entry


   SYNOPSIS

     (sfh), oldname, (cfh), newname -> source_change_info,
     target_change_info

   ARGUMENT

     struct RENAME4args {
             /* SAVED_FH: source directory */
             component4      oldname;
             /* CURRENT_FH: target directory */
             component4      newname;
     };


   RESULT

     struct RENAME4resok {
             change_info4    source_cinfo;
             change_info4    target_cinfo;
     };

     union RENAME4res switch (nfsstat4 status) {
      case NFS4_OK:
              RENAME4resok   resok4;
      default:
              void;
     };


   DESCRIPTION

     The RENAME operation renames the object identified by oldname in
     the source directory corresponding to the saved filehandle, as set
     by the SAVEFH operation, to newname in the target directory
     corresponding to the current filehandle.  The operation is required
     to be atomic to the client.  Source and target directories must
     reside on the same filesystem on the server.  On success, the
     current filehandle will continue to be the target directory.

     If the target directory already contains an entry with the name,
     newname, the source object must be compatible with the target:
     either both are non-directories or both are directories and the
     target must be empty.  If compatible, the existing target is
     removed before the rename occurs (See the IMPLEMENTATION subsection
     of the section "Operation 28: REMOVE - Remove Filesystem Object"
     for client and server actions whenever a target is removed).  If
     they are not compatible or if the target is a directory but not
     empty, the server will return the error, NFS4ERR_EXIST.


Expires: February 2003                                        [Page 197]


Draft Specification      NFS version 4 Protocol              August 2002


     If oldname and newname both refer to the same file (they might be
     hard links of each other), then RENAME should perform no action and
     return success.

     For both directories involved in the RENAME, the server returns
     change_info4 information.  With the atomic field of the
     change_info4 struct, the server will indicate if the before and
     after change attributes were obtained atomically with respect to
     the rename.

     If the oldname refers to a named attribute and the saved and
     current filehandles refer to different filesystem objects, the
     server will return NFS4ERR_XDEV just as if the saved and current
     filehandles represented directories on different filesystems.

     If the oldname or newname has a length of 0 (zero), or if oldname
     or newname does not obey the UTF-8 definition, the error
     NFS4ERR_INVAL will be returned.



   IMPLEMENTATION

     The RENAME operation must be atomic to the client.  The statement
     "source and target directories must reside on the same filesystem
     on the server" means that the fsid fields in the attributes for the
     directories are the same. If they reside on different filesystems,
     the error, NFS4ERR_XDEV, is returned.

     Based on the value of the fh_expire_type attribute for the object,
     the filehandle may or may not expire on a RENAME.  However, server
     implementors are strongly encouraged to attempt to keep filehandles
     from expiring in this fashion.

     On some servers, the file names "." and ".." are illegal as either
     oldname or newname, and will result in the error NFS4ERR_BADNAME.
     In addition, on many servers the case of oldname or newname being
     an alias for the source directory will be checked for.  Such
     servers will return the error NFS4ERR_INVAL in these cases.

     If either of the source or target filehandles are not directories,
     the server will return NFS4ERR_NOTDIR.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADNAME
     NFS4ERR_BADXDR
     NFS4ERR_DELAY


Expires: February 2003                                        [Page 198]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_DQUOT
     NFS4ERR_EXIST
     NFS4ERR_FHEXPIRED
     NFS4ERR_FILE_OPEN
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_MOVED
     NFS4ERR_NAMETOOLONG
     NFS4ERR_NOENT
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOSPC
     NFS4ERR_NOTDIR
     NFS4ERR_NOTEMPTY
     NFS4ERR_NOTSUPP
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_WRONGSEC



































Expires: February 2003                                        [Page 199]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.28.  Operation 30: RENEW - Renew a Lease


   SYNOPSIS

     clientid -> ()

   ARGUMENT

     struct RENEW4args {
             clientid4       clientid;
     };


   RESULT

     struct RENEW4res {
             nfsstat4        status;
     };


   DESCRIPTION

     The RENEW operation is used by the client to renew leases which it
     currently holds at a server.  In processing the RENEW request, the
     server renews all leases associated with the client.  The
     associated leases are determined by the clientid provided via the
     SETCLIENTID operation.


   IMPLEMENTATION



   ERRORS

     NFS4ERR_BADXDR
     NFS4ERR_EXPIRED
     NFS4ERR_INVAL
     NFS4ERR_LEASE_MOVED
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE_CLIENTID











Expires: February 2003                                        [Page 200]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.29.  Operation 31: RESTOREFH - Restore Saved Filehandle


   SYNOPSIS

     (sfh) -> (cfh)

   ARGUMENT

     /* SAVED_FH: */
     void;


   RESULT

     struct RESTOREFH4res {
             /* CURRENT_FH: value of saved fh */
             nfsstat4        status;
     };


   DESCRIPTION

     Set the current filehandle to the value in the saved filehandle.
     If there is no saved filehandle then return an error
     NFS4ERR_NOFILEHANDLE.


   IMPLEMENTATION

     Operations like OPEN and LOOKUP use the current filehandle to
     represent a directory and replace it with a new filehandle.
     Assuming the previous filehandle was saved with a SAVEFH operator,
     the previous filehandle can be restored as the current filehandle.
     This is commonly used to obtain post-operation attributes for the
     directory, e.g.

             PUTFH (directory filehandle)
             SAVEFH
             GETATTR attrbits     (pre-op dir attrs)
             CREATE optbits "foo" attrs
             GETATTR attrbits     (file attributes)
             RESTOREFH
             GETATTR attrbits     (post-op dir attrs)



   ERRORS

     NFS4ERR_BADHANDLE
     NFS4ERR_FHEXPIRED
     NFS4ERR_MOVED


Expires: February 2003                                        [Page 201]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_NOFILEHANDLE
     NFS4ERR_RESOURCE
     NFS4ERR_RESTOREFH
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_WRONGSEC
















































Expires: February 2003                                        [Page 202]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.30.  Operation 32: SAVEFH - Save Current Filehandle


   SYNOPSIS

     (cfh) -> (sfh)


   ARGUMENT

     /* CURRENT_FH: */
     void;



   RESULT

     struct SAVEFH4res {
             /* SAVED_FH: value of current fh */
             nfsstat4        status;
     };



   DESCRIPTION

     Save the current filehandle.  If a previous filehandle was saved
     then it is no longer accessible.  The saved filehandle can be
     restored as the current filehandle with the RESTOREFH operator.

     On success, the current filehandle retains its value.


   IMPLEMENTATION



   ERRORS

     NFS4ERR_BADHANDLE
     NFS4ERR_FHEXPIRED
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE








Expires: February 2003                                        [Page 203]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.31.  Operation 33: SECINFO - Obtain Available Security


   SYNOPSIS

     (cfh), name -> { secinfo }

   ARGUMENT

     struct SECINFO4args {
             /* CURRENT_FH: directory */
             component4     name;
     };


   RESULT

     enum rpc_gss_svc_t {/* From RFC 2203 */
             RPC_GSS_SVC_NONE        = 1,
             RPC_GSS_SVC_INTEGRITY   = 2,
             RPC_GSS_SVC_PRIVACY     = 3
     };

     struct rpcsec_gss_info {
             sec_oid4        oid;
             qop4            qop;
             rpc_gss_svc_t   service;
     };

     union secinfo4 switch (uint32_t flavor) {
      case RPCSEC_GSS:
              rpcsec_gss_info        flavor_info;
      default:
              void;
     };

     typedef secinfo4 SECINFO4resok<>;

     union SECINFO4res switch (nfsstat4 status) {
      case NFS4_OK:
              SECINFO4resok resok4;
      default:
              void;
     };



   DESCRIPTION

     The SECINFO operation is used by the client to obtain a list of
     valid RPC authentication flavors for a specific directory
     filehandle, file name pair.  SECINFO should apply the same access


Expires: February 2003                                        [Page 204]


Draft Specification      NFS version 4 Protocol              August 2002


     methodology used for LOOKUP when evaluating the name.  Therefore,
     if the requestor does not have the appropriate access to LOOKUP the
     name then SECINFO must behave the same way and return
     NFS4ERR_ACCESS.

     The result will contain an array which represents the security
     mechanisms available, with an order corresponding to server's
     preferences, the most preferred being first in the array. The
     client is free to pick whatever security mechanism it both desires
     and supports, or to pick in the server's preference order the first
     one it supports.  The array entries are represented by the secinfo4
     structure.  The field 'flavor' will contain a value of AUTH_NONE,
     AUTH_SYS (as defined in [RFC1831]), or RPCSEC_GSS (as defined in
     [RFC2203]).

     For the flavors AUTH_NONE and AUTH_SYS, no additional security
     information is returned.  For a return value of RPCSEC_GSS, a
     security triple is returned that contains the mechanism object id
     (as defined in [RFC2743]), the quality of protection (as defined in
     [RFC2743]) and the service type (as defined in [RFC2203]).  It is
     possible for SECINFO to return multiple entries with flavor equal
     to RPCSEC_GSS with different security triple values.

     On success, the current filehandle retains its value.

     If the name has a length of 0 (zero), or if name does not obey the
     UTF-8 definition, the error NFS4ERR_INVAL will be returned.


   IMPLEMENTATION

     The SECINFO operation is expected to be used by the NFS client when
     the error value of NFS4ERR_WRONGSEC is returned from another NFS
     operation.  This signifies to the client that the server's security
     policy is different from what the client is currently using.  At
     this point, the client is expected to obtain a list of possible
     security flavors and choose what best suits its policies.

     As mentioned, the server's security policies will determine when a
     client request receives NFS4ERR_WRONGSEC.  The operations which may
     receive this error are: LINK, LOOKUP, OPEN, PUTFH, PUTPUBFH,
     PUTROOTFH, RESTOREFH, RENAME, and indirectly READDIR.  LINK and
     RENAME will only receive this error if the security used for the
     operation is inappropriate for saved filehandle. With the exception
     of READDIR, With the exception of READDIR, these operations
     represent the point at which the client can instantiate a
     filehandle into the "current filehandle" at the server.  The
     filehandle is either provided by the client (PUTFH, PUTPUBFH,
     PUTROOTFH) or generated as a result of a name to filehandle
     translation (LOOKUP and OPEN).  RESTOREFH is different because the
     filehandle is a result of a previous SAVEFH.  Even though the
     filehandle, for RESTOREFH, might have previously passed the


Expires: February 2003                                        [Page 205]


Draft Specification      NFS version 4 Protocol              August 2002


     server's inspection for a security match, the server will check it
     again on RESTOREFH to ensure that the security policy has not
     changed.

     If the client wants to resolve an error return of NFS4ERR_WRONGSEC,
     the following will occur:

       o For LOOKUP and OPEN, the client will use SECINFO with the same
         current filehandle and name as provided in the original LOOKUP
         or OPEN to enumerate the available security triples.

       o For LINK, PUTFH, RENAME, and RESTOREFH, the client will use
         SECINFO and provide the parent directory filehandle and object
         name which corresponds to the filehandle originally provided by
         the PUTFH RESTOREFH, or for LINK and RENAME, the SAVEFH.

       o For PUTROOTFH and PUTPUBFH, the client will be unable to use
         the SECINFO operation since SECINFO requires a current
         filehandle and none exist for these two operations.  Therefore,
         the client must iterate through the security triples available
         at the client and reattempt the PUTROOTFH or PUTPUBFH
         operation. In the unfortunate event none of the MANDATORY
         security triples are supported by the client and server, the
         client SHOULD try using others that support integrity. Failing
         that, the client can try using AUTH_NONE, but because such
         forms lack integrity checks, this puts the client at risk.
         Nonetheless, the server SHOULD allow the client to use whatever
         security form the client requests and the server supports,
         since the risks of doing so are on the client.

     The READDIR operation will not directly return the NFS4ERR_WRONGSEC
     error.  However, if the READDIR request included a request for
     attributes, it is possible that the READDIR request's security
     triple does not match that of a directory entry.  If this is the
     case and the client has requested the rdattr_error attribute, the
     server will return the NFS4ERR_WRONGSEC error in rdattr_error for
     the entry.

     See the section "Security Considerations" for a discussion on the
     recommendations for security flavor used by SECINFO.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADNAME
     NFS4ERR_BADXDR
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_MOVED


Expires: February 2003                                        [Page 206]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_NAMETOOLONG
     NFS4ERR_NOENT
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTDIR
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE















































Expires: February 2003                                        [Page 207]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.32.  Operation 34: SETATTR - Set Attributes


   SYNOPSIS

     (cfh), stateid, attrmask, attr_vals -> attrsset

   ARGUMENT

     struct SETATTR4args {
             /* CURRENT_FH: target object */
             stateid4        stateid;
             fattr4          obj_attributes;
     };


   RESULT

     struct SETATTR4res {
             nfsstat4        status;
             bitmap4         attrsset;
     };


   DESCRIPTION

     The SETATTR operation changes one or more of the attributes of a
     filesystem object.  The new attributes are specified with a bitmap
     and the attributes that follow the bitmap in bit order.

     The stateid argument for SETATTR is used to provide file locking
     context that is necessary for SETATTR requests that set the size
     attribute.  Since setting the size attribute modifies the file's
     data, it has the same locking requirements as a corresponding
     WRITE.  Any SETATTR that sets the size attribute is incompatible
     with a share reservation that specifies DENY_WRITE.  The area
     between the old end-of-file and the new end-of-file is considered
     to be modified just as would have been the case had the area in
     question been specified as the target of WRITE, for the purpose of
     checking conflicts with record locks, for those cases in which a
     server is implementing mandatory record locking behavior.  A valid
     stateid should always be specified.  When the file size attribute
     is not set, the special stateid consisting of all bits zero should
     be passed.

     On either success or failure of the operation, the server will
     return the attrsset bitmask to represent what (if any) attributes
     were successfully set.  The attrsset in the response is a subset of
     the bitmap4 that is part of the obj_attributes in the argument.

     On success, the current filehandle retains its value.



Expires: February 2003                                        [Page 208]


Draft Specification      NFS version 4 Protocol              August 2002


   IMPLEMENTATION

     If the request specifies the owner attribute to be set, the server
     should allow the operation to succeed if the current owner of the
     object matches the value specified in the request.  Some servers
     may be implemented in a way as to prohibit the setting of the owner
     attribute unless the requestor has privilege to do so.  If the
     server is lenient in this one case of matching owner values, the
     client implementation may be simplified in cases of creation of an
     object followed by a SETATTR.

     The file size attribute is used to request changes to the size of a
     file. A value of 0 (zero) causes the file to be truncated, a value
     less than the current size of the file causes data from new size to
     the end of the file to be discarded, and a size greater than the
     current size of the file causes logically zeroed data bytes to be
     added to the end of the file.  Servers are free to implement this
     using holes or actual zero data bytes. Clients should not make any
     assumptions regarding a server's implementation of this feature,
     beyond that the bytes returned will be zeroed.  Servers must
     support extending the file size via SETATTR.

     SETATTR is not guaranteed atomic.  A failed SETATTR may partially
     change a file's attributes.

     Changing the size of a file with SETATTR indirectly changes the
     time_modify.  A client must account for this as size changes can
     result in data deletion.

     The attributes time_access_set and time_modify_set are write-only
     attributes constructed as a switched union so the client can direct
     the server in setting the time values.  If the switched union
     specifies SET_TO_CLIENT_TIME4, the client has provided an nfstime4
     to be used for the operation.  If the switch union does not specify
     SET_TO_CLIENT_TIME4, the server is to use its current time for the
     SETATTR operation.

     If server and client times differ, programs that compare client
     time to file times can break. A time maintenance protocol should be
     used to limit client/server time skew.

     Use of a COMPOUND containing a VERIFY operation specifying only the
     change attribute, immediately followed by a SETATTR, provides a
     means whereby a client may specify a request that emulates the
     functionality of the SETATTR guard mechanism of NFS version 3.
     Since the function of the guard mechanism is to avoid changes to
     the file attributes based on stale information, delays between
     checking of the guard condition and the setting of the attributes
     have the potential to compromise this function, as would the
     corresponding delay in the NFS version 4 emulation.  Therefore, NFS
     version 4 servers should take care to avoid such delays, to the
     degree possible, when executing such a request.


Expires: February 2003                                        [Page 209]


Draft Specification      NFS version 4 Protocol              August 2002


     If the server does not support an attribute as requested by the
     client, the server should return NFS4ERR_ATTRNOTSUPP.

     A mask of the attibutes actually set is returned by SETATTR in all
     cases.  That mask must not include attributes bits not requested to
     be set by the client, and must be equal to the mask of attributes
     requested to be set only if the SETATTR completes without error.


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_ATTRNOTSUPP
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADOWNER
     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_DQUOT
     NFS4ERR_EXPIRED
     NFS4ERR_FBIG
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_ISDIR
     NFS4ERR_LOCKED
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOSPC
     NFS4ERR_NOTSUPP
     NFS4ERR_OLD_STATEID
     NFS4ERR_OPENMODE
     NFS4ERR_PERM
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_STALE_STATEID














Expires: February 2003                                        [Page 210]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.33.  Operation 35: SETCLIENTID - Negotiate Clientid


   SYNOPSIS

     client, callback, callback_ident -> clientid, setclientid_confirm

   ARGUMENT

     struct SETCLIENTID4args {
             nfs_client_id4  client;
             cb_client4      callback;
             uint32_t        callback_ident;
     };


   RESULT

     struct SETCLIENTID4resok {
             clientid4       clientid;
             verifier4       setclientid_confirm;
     };

     union SETCLIENTID4res switch (nfsstat4 status) {
      case NFS4_OK:
              SETCLIENTID4resok      resok4;
      case NFS4ERR_CLID_INUSE:
              clientaddr4    client_using;
      default:
              void;
     };


   DESCRIPTION

     The client uses SETCLIENTID operation to notify the server of its
     intention to use a particular client identifier, callback, and
     callback_ident for subsequent requests that entail creating lock,
     share reservation, and delegation state on the server.  Upon
     successful completion the server will return a short hand clientid
     which, if confirmed via a separate step, will be used in subsequent
     file locking and file open requests. Confirmation of the clientid
     must be done via the SETCLIENTID_CONFIRM operation to return the
     clientid and setclientid_confirm values, as verifiers, to the
     server. The reason why two verifiers are necessary is that it is
     possible to use SETCLIENTID and SETCLIENTID_CONFIRM to modify the
     callback and callback_ident information but not the short hand
     clientid. In that event, the setclientid_confirm value is
     effectively the only verifier.

     The callback information provided in this operation will be used if
     the client is provided an open delegation at a future point.


Expires: February 2003                                        [Page 211]


Draft Specification      NFS version 4 Protocol              August 2002


     Therefore, the client must correctly reflect the program and port
     numbers for the callback program at the time SETCLIENTID is used.

     The callback_ident value is used by the server on the callback.
     The client can use leverage the callback_ident eliminate the need
     for more than one callback RPC program number while still being
     able to determine which server is initiating the callback.


   IMPLEMENTATION

     To understand how to implement SETCLIENTID, make the following
     notations. Let:


        x be the value of the client.id subfield of the SETCLIENTID4args
          structure.

        v be the value of the client.verifier subfield of the
          SETCLIENTID4args structure.

        c be the value of the clientid field returned in the
          SETCLIENTID4resok structure.

        k represent the value combination of the fields callback and
          callback_ident fields of the SETCLIENTID4args structure.

        s be the setclientid_confirm value returned in the
          SETCLIENTID4resok structure.

        { x, v, c, k, s }
          be a quintuple for a client record. A client record is
          confirmed if there has been a SETCLIENTID_CONFIRM operation to
          confirm it.  Otherwise it is unconfirmed. An unconfirmed
          record is established by a SETCLIENTID call.

     Since SETCLIENTID is a non-idempotent operation, let us assume that
     the server is implementing the duplicate request cache (DRC).

     When the server gets a SETCLIENTID { v, x, k } request, it
     processes it in the following manner.


     o It first looks up the request in the DRC. If there is a hit, it
       returns the result cached in the DRC.  The server does NOT remove
       client state (locks, shares, delegations) nor does it modify any
       recorded callback and callback_ident information for client { x
       }.

       For any DRC miss, the server takes the client id string x, and
       searches for client records for x that the server may have
       recorded from previous SETCLIENTID calls. For any confirmed


Expires: February 2003                                        [Page 212]


Draft Specification      NFS version 4 Protocol              August 2002


       record with the same id string x, if the recorded principal does
       not match that of SETCLIENTID call, then the server returns a
       NFS4ERR_CLID_INUSE error.

       For brevity of discussion, the remaining description of the
       processing assumes that there was a DRC miss, and that where the
       server has previously recorded a confirmed record for client x,
       the aforementioned principal check has successfully passed.


     o The server checks if it has recorded a confirmed recorded for {
       v, x, c, l, s }, where l may or may not equal k. If so, and since
       the id verifier v of the request matches that which is confirmed
       and recorded, the server treats this as a probable callback
       information update and records an unconfirmed { v, x, c, k, t }
       and leaves the confirmed { v, x, c, l, s } in place, such that t
       != s. It does not matter if k equals l or not.  Any pre-existing
       unconfirmed { v, x, c, *, * } is removed.

       The server returns { c, t }. It is indeed returning the old
       clientid4 value c, because the client apparently only wants to
       update callback value k to value l.  It's possible this request
       is one from the Byzantine router that has stale callback
       information, but this is not a problem.  The callback information
       update is only confirmed if followed up by a SETCLIENTID_CONFIRM
       { c, t }.

       The server awaits confirmation of k via SETCLIENTID_CONFIRM { c,
       t }.

       The server does NOT remove client (lock/share/delegation) state
       for x.


     o The server has previously recorded a confirmed { u, x, c, l, s }
       record such that v != u, l may or may not equal k, and has not
       recorded any unconfirmed { *, x, *, *, * } record for x.  The
       server records an unconfirmed { v, x, d, k, t } (d != c, t != s).

       The server returns { d, t }.

       The server awaits confirmation of { d, k } via
       SETCLIENTID_CONFIRM { d, t }.

       The server does NOT remove client (lock/share/delegation) state
       for x.


     o The server has previously recorded a confirmed { u, x, c, l, s }
       record such that v != u, l may or may not equal k, and recorded
       an unconfirmed { w, x, d, m, t } record such that c != d, t != s,
       m may or may not equal k, m may or may not equal l, and k may or


Expires: February 2003                                        [Page 213]


Draft Specification      NFS version 4 Protocol              August 2002


       may not equal l. Whether w == v or w != v makes no difference.
       The server simply removes the unconfirmed { w, x, d, m, t }
       record and replaces it with an unconfirmed { v, x, e, k, r }
       record, such that e != d, e != c, r != t, r != s.

       The server returns { e, r }.

       The server awaits confirmation of { e, k } via
       SETCLIENTID_CONFIRM { e, r }.

       The server does NOT remove client (lock/share/delegation) state
       for x.


     o The server has no confirmed { *, x, *, *, * } for x. It may or
       may not have recorded an unconfirmed { u, x, c, l, s }, where l
       may or may not equal k, and u may or may not equal v.  Any
       unconfirmed record { u, x, c, l, * }, regardless whether u == v
       or l == k, is replaced with an unconfirmed record { v, x, d, k, t
       } where d != c, t != s.

       The server returns { d, t }.

       The server awaits confirmation of { d, k } via
       SETCLIENTID_CONFIRM { d, t }. The server does NOT remove client
       (lock/share/delegation) state for x.

     The server generates the clientid and setclientid_confirm values
     and must take care to ensure that these values are extremely
     unlikely to ever be regenerated.



   ERRORS

     NFS4ERR_BADXDR
     NFS4ERR_CLID_INUSE
     NFS4ERR_INVAL
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT














Expires: February 2003                                        [Page 214]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.34.  Operation 36: SETCLIENTID_CONFIRM - Confirm Clientid


   SYNOPSIS

     clientid, verifier -> -

   ARGUMENT

     struct SETCLIENTID_CONFIRM4args {
             clientid4       clientid;
             verifier4       setclientid_confirm;
     };


   RESULT

     struct SETCLIENTID_CONFIRM4res {
             nfsstat4        status;
     };


   DESCRIPTION

     This operation is used by the client to confirm the results from a
     previous call to SETCLIENTID.  The client provides the server
     supplied (from a SETCLIENTID response) clientid.  The server
     responds with a simple status of success or failure.


   IMPLEMENTATION

     The client must use the SETCLIENTID_CONFIRM operation to confirm
     the following two distinct cases:


     o The client's use of a new shorthand client identifier (as
       returned from the server in the response to SETCLIENTID), a new
       callback value (as specified in the arguments to SETCLIENTID) and
       a new callback_ident (as specified in the arguments to
       SETCLIENTID) value.  The client's use of SETCLIENTID_CONFIRM in
       this case also confirms the removal of any of the client's
       previous relevant leased state. Relevant leased client state
       includes record locks, share reservations, and where the server
       does not support the CLAIM_DELEGATE_PREV claim type, delegations.
       If the server supports CLAIM_DELEGATE_PREV, then
       SETCLIENTID_CONFIRM MUST NOT remove delegations for this client;
       relevant leased client state would then just include record locks
       and share reservations.

     o The client's re-use of an old, previously confirmed, shorthand
       client identifier, a new callback value, and a new callback_ident


Expires: February 2003                                        [Page 215]


Draft Specification      NFS version 4 Protocol              August 2002


       value.  The client's use of SETCLIENTID_CONFIRM in this case MUST
       NOT result in the removal of any previous leased state (locks,
       share reservations, and delegations)

     We use the same notation and definitions for v, x, c, k, s, and
     unconfirmed and confirmed client records as introduced in the
     description of the SETCLIENTID operation. The arguments to
     SETCLIENTID_CONFIRM are indicated by the notation { c, s }, where c
     is a value of type clientid4, and s is a value of type verifier4
     corresponding to the setclientid_confirm field.

     As with SETCLIENTID, SETCLIENTID_CONFIRM is a nonidempotent
     operation, and we assume that the server is implementing the
     duplicate request cache (DRC).

     When the server gets a SETCLIENTID_CONFIRM { c, s } request, it
     processes it in the following manner.

     o It first looks up the request in the DRC. If there is a hit, it
       returns the result cached in the DRC.  The server does not remove
       any relevant leased client state nor does it modify any recorded
       callback and callback_ident information for client { x } as
       represented by the short hand value c.

     For a DRC miss, the server checks for client records that match the
     short hand value c.  The processing cases are as follows:

     o The server has recorded an unconfirmed { v, x, c, k, s } record
       and a confirmed { v, x, c, l, t } record, such that s != t.  If
       the principals of the records do not match that of the
       SETCLIENTID_CONFIRM, the server returns NFS4ERR_CLID_INUSE, and
       no relevant leased client state is removed and no recorded
       callback and callback_ident information for client { x } is
       changed. Otherwise, the confirmed { v, x, c, l, t } record is
       removed and the unconfirmed { v, x, c, k, s } is marked as
       confirmed, thereby modifying recorded and confirmed callback and
       callback_ident information for client { x }.

       The server does not remove any relevant leased client state.

       The server returns NFS4_OK.

     o The server has not recorded an unconfirmed { v, x, c, *, * } and
       has recorded a confirmed { v, x, c, *, s }. If the principals of
       the record and of SETCLIENTID_CONFIRM do not match, the server
       returns NFS4ERR_CLID_INUSE without removing any relevant leased
       client state and without changing recorded callback and
       callback_ident values for client { x }.

       If the principals match, then what has likely happened is that
       the client never got the response from the SETCLIENTID_CONFIRM,
       and the DRC entry has been purged. Whatever the scenario, since


Expires: February 2003                                        [Page 216]


Draft Specification      NFS version 4 Protocol              August 2002


       the principals match, as well as { c, s } matching a confirmed
       record, the server leaves client x's relevant leased client state
       intact, leaves its callback and callback_ident values unmodified,
       and returns NFS4_OK.

     o The server has not recorded a confirmed { *, *, c, *, * }, and
       has recorded an unconfirmed { *, x, c, k, s }.  Even if this is a
       retry from client, nonetheless the client's first
       SETCLIENTID_CONFIRM attempt was not received by the server.
       Retry or not, the server doesn't know, but it processes it as if
       were a first try.  If the principal of the unconfirmed { *, x, c,
       k, s } record mismatches that of the SETCLIENTID_CONFIRM request
       the server returns NFS4ERR_CLID_INUSE without removing any
       relevant leased client state.

       Otherwise, the server records a confirmed { *, x, c, k, s }. If
       there is also a confirmed { *, x, d, *, t }, the server MUST
       remove the client x's relevant leased client state, and overwrite
       the callback state with k. The confirmed record { *, x, d, *, t }
       is removed.

       Server returns NFS4_OK.

     o The server has no record of a confirmed or unconfirmed { *, *, c,
       *, s }.  Return NFS4ERR_STALE_CLIENTID.  The server does not
       remove any relevant leased client state, nor does it modify any
       recorded callback and callback_ident information for any client.

     The server needs to cache unconfirmed { v, x, c, k, s } client
     records and await for some time their confirmation.  As should be
     clear from the record processing discussions for SETCLIENTID and
     SETCLIENTID_CONFIRM, there are cases where the server does not
     deterministically remove unconfirmed client records.  To avoid
     running out of resources, the server is not required to hold
     unconfirmed records indefinitely.  One strategy the server might
     use is to set a limit on how many unconfirmed client records it
     will maintain, and then when the limit would be exceeded, remove
     the oldest record. Another strategy might be to remove an
     unconfirmed record when some amount of time has elapsed. The choice
     of the amount of time is fairly arbitrary but it is surely no
     higher than the server's lease time period. Consider that leases
     need to be renewed before the lease time expires via an operation
     from the client.  If the client cannot issue a SETCLIENTID_CONFIRM
     after a SETCLIENTID before a perod of time equal to that of a lease
     expires, then the client is unlikely to be able maintain state on
     the server during steady state operation.

     If the client does send a SETCLIENTID_CONFIRM for an unconfirmed
     record that the server has already deleted, the client will get
     NFS4ERR_STALE_CLIENTID back.  If so, the client should then start
     over, and send SETCLIENTID to reestablish an unconfirmed client
     record and get back an unconfirmed clientid and setclientid_confirm


Expires: February 2003                                        [Page 217]


Draft Specification      NFS version 4 Protocol              August 2002


     verifier.  The client should then send the SETCLIENTID_CONFIRM to
     confirm the clientid.

     SETCLIENTID_CONFIRM does not establish or renew a lease. However,
     if SETCLIENTID_CONFIRM removes relevant leased client state, and
     that state does not include existing delegations, the server MUST
     allow the client a period of time no less than the value of
     lease_time attribute, to reclaim, (via the CLAIM_DELEGATE_PREV
     claim tpe of the OPEN operation) its delegations before removing
     unreclaimed delegations.


   ERRORS

     NFS4ERR_BADXDR
     NFS4ERR_CLID_INUSE
     NFS4ERR_INVAL
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE_CLIENTID


































Expires: February 2003                                        [Page 218]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.35.  Operation 37: VERIFY - Verify Same Attributes


   SYNOPSIS

     (cfh), fattr -> -

   ARGUMENT

     struct VERIFY4args {
             /* CURRENT_FH: object */
             fattr4          obj_attributes;
     };


   RESULT

     struct VERIFY4res {
             nfsstat4        status;
     };


   DESCRIPTION

     The VERIFY operation is used to verify that attributes have a value
     assumed by the client before proceeding with following operations
     in the compound request.  If any of the attributes do not match
     then the error NFS4ERR_NOT_SAME must be returned.  The current
     filehandle retains its value after successful completion of the
     operation.

   IMPLEMENTATION

     One possible use of the VERIFY operation is the following compound
     sequence.  With this the client is attempting to verify that the
     file being removed will match what the client expects to be
     removed.  This sequence can help prevent the unintended deletion of
     a file.

             PUTFH (directory filehandle)
             LOOKUP (file name)
             VERIFY (filehandle == fh)
             PUTFH (directory filehandle)
             REMOVE (file name)

     This sequence does not prevent a second client from removing and
     creating a new file in the middle of this sequence but it does help
     avoid the unintended result.

     In the case that a recommended attribute is specified in the VERIFY
     operation and the server does not support that attribute for the
     filesystem object, the error NFS4ERR_NOTSUPP is returned to the


Expires: February 2003                                        [Page 219]


Draft Specification      NFS version 4 Protocol              August 2002


     client.

   When the attribute rdattr_error or any write-only attribute (e.g.
   time_modify_set) is specified, the error NFS4ERR_INVAL is returned to
   the client.  If both of these conditions apply, the server is free to
   return either error.

   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_ATTRNOTSUPP
     NFS4ERR_BADCHAR
     NFS4ERR_BADHANDLE
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_FHEXPIRED
     NFS4ERR_INVAL
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOTSUPP
     NFS4ERR_NOT_SAME
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE






























Expires: February 2003                                        [Page 220]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.36.  Operation 38: WRITE - Write to File


   SYNOPSIS

     (cfh), stateid, offset, stable, data -> count, committed, writeverf

   ARGUMENT

     enum stable_how4 {
             UNSTABLE4       = 0,
             DATA_SYNC4      = 1,
             FILE_SYNC4      = 2
     };

     struct WRITE4args {
             /* CURRENT_FH: file */
             stateid4        stateid;
             offset4         offset;
             stable_how4     stable;
             opaque          data<>;
     };


   RESULT

     struct WRITE4resok {
             count4          count;
             stable_how4     committed;
             verifier4       writeverf;
     };

     union WRITE4res switch (nfsstat4 status) {
      case NFS4_OK:
              WRITE4resok    resok4;
      default:
              void;
     };


   DESCRIPTION

     The WRITE operation is used to write data to a regular file.  The
     target file is specified by the current filehandle.  The offset
     specifies the offset where the data should be written.  An offset
     of 0 (zero) specifies that the write should start at the beginning
     of the file.  The count, as encoded as part of the opaque data
     parameter, represents the number of bytes of data that are to be
     written.  If the count is 0 (zero), the WRITE will succeed and
     return a count of 0 (zero) subject to permissions checking.  The
     server may choose to write fewer bytes than requested by the
     client.


Expires: February 2003                                        [Page 221]


Draft Specification      NFS version 4 Protocol              August 2002


     Part of the write request is a specification of how the write is to
     be performed.  The client specifies with the stable parameter the
     method of how the data is to be processed by the server.  If stable
     is FILE_SYNC4, the server must commit the data written plus all
     filesystem metadata to stable storage before returning results.
     This corresponds to the NFS version 2 protocol semantics.  Any
     other behavior constitutes a protocol violation.  If stable is
     DATA_SYNC4, then the server must commit all of the data to stable
     storage and enough of the metadata to retrieve the data before
     returning.  The server implementor is free to implement DATA_SYNC4
     in the same fashion as FILE_SYNC4, but with a possible performance
     drop.  If stable is UNSTABLE4, the server is free to commit any
     part of the data and the metadata to stable storage, including all
     or none, before returning a reply to the client. There is no
     guarantee whether or when any uncommitted data will subsequently be
     committed to stable storage. The only guarantees made by the server
     are that it will not destroy any data without changing the value of
     verf and that it will not commit the data and metadata at a level
     less than that requested by the client.

     The stateid value for a WRITE request represents a value returned
     from a previous record lock or share reservation request.  The
     stateid is used by the server to verify that the associated share
     reservation and any record locks are still valid and to update
     lease timeouts for the client.

     Upon successful completion, the following results are returned.
     The count result is the number of bytes of data written to the
     file. The server may write fewer bytes than requested. If so, the
     actual number of bytes written starting at location, offset, is
     returned.

     The server also returns an indication of the level of commitment of
     the data and metadata via committed. If the server committed all
     data and metadata to stable storage, committed should be set to
     FILE_SYNC4. If the level of commitment was at least as strong as
     DATA_SYNC4, then committed should be set to DATA_SYNC4.  Otherwise,
     committed must be returned as UNSTABLE4. If stable was FILE4_SYNC,
     then committed must also be FILE_SYNC4: anything else constitutes a
     protocol violation. If stable was DATA_SYNC4, then committed may be
     FILE_SYNC4 or DATA_SYNC4: anything else constitutes a protocol
     violation. If stable was UNSTABLE4, then committed may be either
     FILE_SYNC4, DATA_SYNC4, or UNSTABLE4.

     The final portion of the result is the write verifier.  The write
     verifier is a cookie that the client can use to determine whether
     the server has changed instance (boot) state between a call to
     WRITE and a subsequent call to either WRITE or COMMIT.  This cookie
     must be consistent during a single instance of the NFS version 4
     protocol service and must be unique between instances of the NFS
     version 4 protocol server, where uncommitted data may be lost.



Expires: February 2003                                        [Page 222]


Draft Specification      NFS version 4 Protocol              August 2002


     If a client writes data to the server with the stable argument set
     to UNSTABLE4 and the reply yields a committed response of
     DATA_SYNC4 or UNSTABLE4, the client will follow up some time in the
     future with a COMMIT operation to synchronize outstanding
     asynchronous data and metadata with the server's stable storage,
     barring client error. It is possible that due to client crash or
     other error that a subsequent COMMIT will not be received by the
     server.

     For a WRITE with a stateid value of all bits 0, the server MAY
     allow the WRITE to be serviced subject to mandatory file locks or
     the current share deny modes for the file.  For a WRITE with a
     stateid value of all bits 1, the server MUST NOT allow the WRITE
     operation to bypass locking checks at the server and are treated
     exactly the same as if a stateid of all bits 0 were used.

     On success, the current filehandle retains its value.


   IMPLEMENTATION

     It is possible for the server to write fewer bytes of data than
     requested by the client.  In this case, the server should not
     return an error unless no data was written at all.  If the server
     writes less than the number of bytes specified, the client should
     issue another WRITE to write the remaining data.

     It is assumed that the act of writing data to a file will cause the
     time_modified of the file to be updated.  However, the
     time_modified of the file should not be changed unless the contents
     of the file are changed.  Thus, a WRITE request with count set to 0
     should not cause the time_modified of the file to be updated.

     The definition of stable storage has been historically a point of
     contention.  The following expected properties of stable storage
     may help in resolving design issues in the implementation. Stable
     storage is persistent storage that survives:


             1. Repeated power failures.
             2. Hardware failures (of any board, power supply, etc.).
             3. Repeated software crashes, including reboot cycle.


     This definition does not address failure of the stable storage
     module itself.

     The verifier is defined to allow a client to detect different
     instances of an NFS version 4 protocol server over which cached,
     uncommitted data may be lost. In the most likely case, the verifier
     allows the client to detect server reboots.  This information is
     required so that the client can safely determine whether the server


Expires: February 2003                                        [Page 223]


Draft Specification      NFS version 4 Protocol              August 2002


     could have lost cached data.  If the server fails unexpectedly and
     the client has uncommitted data from previous WRITE requests (done
     with the stable argument set to UNSTABLE4 and in which the result
     committed was returned as UNSTABLE4 as well) it may not have
     flushed cached data to stable storage. The burden of recovery is on
     the client and the client will need to retransmit the data to the
     server.

     A suggested verifier would be to use the time that the server was
     booted or the time the server was last started (if restarting the
     server without a reboot results in lost buffers).

     The committed field in the results allows the client to do more
     effective caching.  If the server is committing all WRITE requests
     to stable storage, then it should return with committed set to
     FILE_SYNC4, regardless of the value of the stable field in the
     arguments. A server that uses an NVRAM accelerator may choose to
     implement this policy.  The client can use this to increase the
     effectiveness of the cache by discarding cached data that has
     already been committed on the server.

     Some implementations may return NFS4ERR_NOSPC instead of
     NFS4ERR_DQUOT when a user's quota is exceeded.  In the case that
     the current filehandle is a directory, the server will return
     NFS4ERR_ISDIR.  If the current filehandle is not a regular file or
     a directory, the server will return NFS4ERR_INVAL.

     If mandatory file locking is on for the file, and corresponding
     record of the to be written file is read or write locked by an
     owner that is not associated with the stateid, the server will
     return NFS4ERR_LOCKED. If so, the client must check if the owner
     corresponding to the stateid used with the WRITE operation has a
     conflicting read lock that overlaps with the region that was to be
     written. If the stateid's owner has no conflicting read lock, then
     the client should try to get the appropriate write record lock via
     the LOCK operation before re-attempting the WRITE. When the WRITE
     completes, the client should release the record lock via LOCKU.

     If the stateid's owner had a conflicting read lock, then the client
     has no choice but to return an error to the application that
     attempted the WRITE. The reason is that since the stateid's owner
     had a read lock, the server either attempted to temporarily
     effectively upgrade this read lock to a write lock, or the server
     has no upgrade capability. If the server attempted to upgrade the
     read lock and failed, it is pointless for the client to re-attempt
     the upgrade via the LOCK operation, because there might be another
     client also trying to upgrade.  If two clients are blocked trying
     upgrade the same lock, the clients deadlock.  If the server has no
     upgrade capability, then it pointless to try a LOCK operation to
     upgrade.




Expires: February 2003                                        [Page 224]


Draft Specification      NFS version 4 Protocol              August 2002


   ERRORS

     NFS4ERR_ACCESS
     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_DELAY
     NFS4ERR_DQUOT
     NFS4ERR_EXPIRED
     NFS4ERR_FBIG
     NFS4ERR_FHEXPIRED
     NFS4ERR_GRACE
     NFS4ERR_INVAL
     NFS4ERR_IO
     NFS4ERR_ISDIR
     NFS4ERR_LEASE_MOVED
     NFS4ERR_LOCKED
     NFS4ERR_MOVED
     NFS4ERR_NOFILEHANDLE
     NFS4ERR_NOSPC
     NFS4ERR_NXIO
     NFS4ERR_OLD_STATEID
     NFS4ERR_OPENMODE
     NFS4ERR_RESOURCE
     NFS4ERR_ROFS
     NFS4ERR_SERVERFAULT
     NFS4ERR_STALE
     NFS4ERR_STALE_STATEID


























Expires: February 2003                                        [Page 225]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.37.  Operation 39: RELEASE_LOCKOWNER - Release Lockowner State


   SYNOPSIS

     lockowner -> ()

   ARGUMENT

     struct RELEASE_LOCKOWNER4args {
             lock_owner4     lock_owner;
     };


   RESULT

     struct RELEASE_LOCKOWNER4res {
             nfsstat4        status;
     };


   DESCRIPTION

     This operation is used to notify the server that the lock_owner is
     no longer in use by the client.  This allows the server to release
     cached state related to the specified lock_owner.  If file locks,
     associated with the lock_owner, are held at the server, the error
     NFS4ERR_LOCKS_HELD will be returned and no further action will be
     taken.


   IMPLEMENTATION

     The client may choose to use this operation to ease the amount of
     server state that is held.  Depending on behavior of applications
     at the client, it may be important for the client to use this
     operation since the server has certain obligations with respect to
     holding a reference to a lock_owner as long as the associated file
     is open.  Therefore, if the client knows for certain that the
     lock_owner will no longer be used under the context of the
     associated open_owner4, it should use RELEASE_LOCKOWNER.


   ERRORS

     NFS4ERR_BADXDR
     NFS4ERR_EXPIRED
     NFS4ERR_GRACE
     NFS4ERR_LEASE_MOVED
     NFS4ERR_LOCKS_HELD
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT


Expires: February 2003                                        [Page 226]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_STALE_CLIENTID





















































Expires: February 2003                                        [Page 227]


Draft Specification      NFS version 4 Protocol              August 2002


14.2.38.  Operation 10044: ILLEGAL - Illegal operation


   SYNOPSIS

     <null>

   ARGUMENT

             void;


   RESULT

             struct ILLEGAL4res {
                     nfsstat4        status;
             };


   DESCRIPTION

     This operation is a placeholder for encoding a result to handle the
     case of the client sending an operation code within COMPOUND that
     is not supported. See the COMPOUND procedure description for more
     details.

     The status field of ILLEGAL4res MUST be set to NFS4ERR_OP_ILLEGAL.


   IMPLEMENTATION

     A client will probably not send an operation with code OP_ILLEGAL
     but if it does, the response will be ILLEGAL4res just as it would
     be with any other invalid operation code. Note that if the server
     gets an illegal operation code that is not OP_ILLEGAL, and if the
     server checks for legal operation codes during the XDR decode
     phase, then the ILLEGAL4res would not be returned.


   ERRORS

     NFS4ERR_OP_ILLEGAL












Expires: February 2003                                        [Page 228]


Draft Specification      NFS version 4 Protocol              August 2002


15.  NFS version 4 Callback Procedures

   The procedures used for callbacks are defined in the following
   sections.  In the interest of clarity, the terms "client" and
   "server" refer to NFS clients and servers, despite the fact that for
   an individual callback RPC, the sense of these terms would be
   precisely the opposite.

15.1.  Procedure 0: CB_NULL - No Operation


   SYNOPSIS

     <null>

   ARGUMENT

     void;


   RESULT

     void;

   DESCRIPTION

     Standard NULL procedure.  Void argument, void response.  Even
     though there is no direct functionality associated with this
     procedure, the server will use CB_NULL to confirm the existence of
     a path for RPCs from server to client.

   ERRORS

     None.




















Expires: February 2003                                        [Page 229]


Draft Specification      NFS version 4 Protocol              August 2002


15.2.  Procedure 1: CB_COMPOUND - Compound Operations


   SYNOPSIS

     compoundargs -> compoundres

   ARGUMENT

     enum nfs_cb_opnum4 {
             OP_CB_GETATTR           = 3,
             OP_CB_RECALL            = 4,
             OP_CB_ILLEGAL           = 10044
     };

     union nfs_cb_argop4 switch (unsigned argop) {
      case OP_CB_GETATTR:    CB_GETATTR4args opcbgetattr;
      case OP_CB_RECALL:     CB_RECALL4args  opcbrecall;
      case OP_CB_ILLEGAL:    void            opcbillegal;
     };

     struct CB_COMPOUND4args {
             utf8string      tag;
             uint32_t        minorversion;
             uint32_t        callback_ident;
             nfs_cb_argop4   argarray<>;
     };


   RESULT

     union nfs_cb_resop4 switch (unsigned resop){
      case OP_CB_GETATTR:    CB_GETATTR4res  opcbgetattr;
      case OP_CB_RECALL:     CB_RECALL4res   opcbrecall;
     };

     struct CB_COMPOUND4res {
             nfsstat4 status;
             utf8string      tag;
             nfs_cb_resop4   resarray<>;
     };


   DESCRIPTION

     The CB_COMPOUND procedure is used to combine one or more of the
     callback procedures into a single RPC request.  The main callback
     RPC program has two main procedures: CB_NULL and CB_COMPOUND.  All
     other operations use the CB_COMPOUND procedure as a wrapper.

     In the processing of the CB_COMPOUND procedure, the client may find
     that it does not have the available resources to execute any or all


Expires: February 2003                                        [Page 230]


Draft Specification      NFS version 4 Protocol              August 2002


     of the operations within the CB_COMPOUND sequence.  In this case,
     the error NFS4ERR_RESOURCE will be returned for the particular
     operation within the CB_COMPOUND procedure where the resource
     exhaustion occurred.  This assumes that all previous operations
     within the CB_COMPOUND sequence have been evaluated successfully.

     Contained within the CB_COMPOUND results is a 'status' field.  This
     status must be equivalent to the status of the last operation that
     was executed within the CB_COMPOUND procedure.  Therefore, if an
     operation incurred an error then the 'status' value will be the
     same error value as is being returned for the operation that
     failed.

     For the definition of the "tag" field, see the section "Procedure
     1:  COMPOUND - Compound Operatoins".

     The value of callback_ident is supplied by the client during
     SETCLIENTID.  The server must use the client supplied
     callback_ident during the CB_COMPOUND to allow the client to
     properly identify the server.

     Illegal operation codes are handled in the same way as they are
     handled for the COMPOUND procedure.


   IMPLEMENTATION

     The CB_COMPOUND procedure is used to combine individual operations
     into a single RPC request.  The client interprets each of the
     operations in turn.  If an operation is executed by the client and
     the status of that operation is NFS4_OK, then the next operation in
     the CB_COMPOUND procedure is executed.  The client continues this
     process until there are no more operations to be executed or one of
     the operations has a status value other than NFS4_OK.


   ERRORS

     NFS4ERR_BADHANDLE
     NFS4ERR_BAD_STATEID
     NFS4ERR_OP_ILLEGAL
     NFS4ERR_RESOURCE












Expires: February 2003                                        [Page 231]


Draft Specification      NFS version 4 Protocol              August 2002


15.2.1.  Operation 3: CB_GETATTR - Get Attributes


   SYNOPSIS

     fh, attrbits -> attrbits, attrvals

   ARGUMENT

     struct CB_GETATTR4args {
             nfs_fh4 fh;
             bitmap4 attr_request;
     };



   RESULT

     struct CB_GETATTR4resok {
             fattr4  obj_attributes;
     };

     union CB_GETATTR4res switch (nfsstat4 status) {
      case NFS4_OK:
              CB_GETATTR4resok       resok4;
      default:
              void;
     };


   DESCRIPTION

     The CB_GETATTR operation is used by the server to obtain the
     current modified state of a file that has been write delegated.
     The attributes size and change are the only ones guaranteed to be
     serviced by the client.  See the section "Handling of CB_GETATTR"
     for a full description of how the client and server are to interact
     with the use of CB_GETATTR.

     If the filehandle specified is not one for which the client holds a
     write open delegation, an NFS4ERR_BADHANDLE error is returned.


   IMPLEMENTATION

     The client returns attrbits and the associated attribute values
     only for attributes that it may change (change, time_modify, size).


   ERRORS

     NFS4ERR_BADHANDLE


Expires: February 2003                                        [Page 232]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_BADXDR
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT



















































Expires: February 2003                                        [Page 233]


Draft Specification      NFS version 4 Protocol              August 2002


15.2.2.  Operation 4: CB_RECALL - Recall an Open Delegation


   SYNOPSIS

     stateid, truncate, fh -> status

   ARGUMENT

     struct CB_RECALL4args {
             stateid4        stateid;
             bool            truncate;
             nfs_fh4         fh;
     };


   RESULT

     struct CB_RECALL4res {
             nfsstat4        status;
     };


   DESCRIPTION

     The CB_RECALL operation is used to begin the process of recalling
     an open delegation and returning it to the server.

     The truncate flag is used to optimize recall for a file which is
     about to be truncated to zero.  When it is set, the client is freed
     of obligation to propagate modified data for the file to the
     server, since this data is irrelevant.

     If the handle specified is not one for which the client holds an
     open delegation, an NFS4ERR_BADHANDLE error is returned.

     If the stateid specified is not one corresponding to an open
     delegation for the file specified by the filehandle, an
     NFS4ERR_BAD_STATEID is returned.


   IMPLEMENTATION

     The client should reply to the callback immediately.  Replying does
     not complete the recall except when an error was returned.  The
     recall is not complete until the delegation is returned using a
     DELEGRETURN.


   ERRORS

     NFS4ERR_BADHANDLE


Expires: February 2003                                        [Page 234]


Draft Specification      NFS version 4 Protocol              August 2002


     NFS4ERR_BAD_STATEID
     NFS4ERR_BADXDR
     NFS4ERR_RESOURCE
     NFS4ERR_SERVERFAULT


















































Expires: February 2003                                        [Page 235]


Draft Specification      NFS version 4 Protocol              August 2002


15.2.3.  Operation 10044: CB_ILLEGAL - Illegal Callback Operation


   SYNOPSIS

     <null>

   ARGUMENT

       void;



   RESULT

             struct CB_ILLEGAL4res {
                     nfsstat4        status;
             };


   DESCRIPTION

     This operation is a placeholder for encoding a result to handle the
     case of the client sending an operation code within COMPOUND that
     is not supported. See the COMPOUND procedure description for more
     details.

     The status field of CB_ILLEGAL4res MUST be set to
     NFS4ERR_OP_ILLEGAL.


   IMPLEMENTATION

     A server will probably not send an operation with code
     OP_CB_ILLEGAL but if it does, the response will be CB_ILLEGAL4res
     just as it would be with any other invalid operation code. Note
     that if the client gets an illegal operation code that is not
     OP_ILLEGAL, and if the client checks for legal operation codes
     during the XDR decode phase, then the CB_ILLEGAL4res would not be
     returned.


   ERRORS

     NFS4ERR_OP_ILLEGAL









Expires: February 2003                                        [Page 236]


Draft Specification      NFS version 4 Protocol              August 2002


16.  Security Considerations

   The major security feature to consider is the authentication of the
   user making the request of NFS service.  Consideration should also be
   given to the integrity and privacy of this NFS request.  These
   specific issues are discussed as part of the section on "RPC and
   Security Flavor".

   For reasons of reduced administration overhead, better performance
   and/or reduction of CPU utilization, users of NFS version 4
   implementations may choose to not use security mechanisms that enable
   integrity protection on each remote procedure call and response. The
   use of mechanisms without integrity leaves the customer vulnerable to
   an attacker in between the NFS client and server that modifies the
   RPC request and/or the response. While implementations are free to
   provide the option to use weaker security mechanisms, there are two
   operations in particular that warrant the implementation overriding
   user choices.

   The first such operation is SECINFO.  It is recommended that the
   client issue the SECINFO call such that it is protected with a
   security flavor that has integrity protection, such as RPCSEC_GSS
   with a security triple that uses either rpc_gss_svc_integrity or
   rpc_gss_svc_privacy (rpc_gss_svc_privacy includes integrity
   protection) service. Without integrity protection encapsulating
   SECINFO and therefore its results, an attacker in the middle could
   modify results such that the client might select a weaker algorithm
   in the set allowed by server, making the client and/or server
   vulnerable to further attacks.

   The second operation that should definitely use integrity protection
   is any GETATTR for the fs_locations attribute. The attack has two
   steps.  First the attacker modifies the unprotected results of some
   operation to return NFS4ERR_MOVED. Second, when the client follows up
   with a GETATTR for the fs_locations attribute, the attacker modifies
   the results to cause the client migrate its traffic to a server
   controlled by the attacker.

   Because the operations SETCLIENTID/SETCLIENTID_CONFIRM are
   responsible for the release of client state, it is imperative that
   the principal used for these operations is checked against and match
   the previous use of these operations.  See the section "Client ID"
   for further discussion.











Expires: February 2003                                        [Page 237]


Draft Specification      NFS version 4 Protocol              August 2002


17.  IANA Considerations


17.1.  Named Attribute Definition

   The NFS version 4 protocol provides for the association of named
   attributes to files.  The name space identifiers for these attributes
   are defined as string names.  The protocol does not define the
   specific assignment of the name space for these file attributes; the
   application developer or system vendor is allowed to define the
   attribute, its semantics, and the associated name.  Even though this
   name space will not be specifically controlled to prevent collisions,
   the application developer or system vendor is strongly encouraged
   register its named attributes with IANA, and provide the name
   assignment and associated semantics for attributes via an
   Informational RFC.  This will provide for interoperability where
   common interests exist.


17.2.  ONC RPC Network Identifiers (netids)

   The section "Structured Data Types" discussed the r_netid field and
   the corresponding r_addr field of a clientaddr4 structure. There
   should be a registry at IANA for netids and the corresponding
   universal address format corresponding to the native address format
   for the transport represent by a a netid.




























Expires: February 2003                                        [Page 238]


Draft Specification      NFS version 4 Protocol              August 2002


18.  RPC definition file

   /*
    *  Copyright (C) The Internet Society (1998,1999,2000,2001,2002).
    *  All Rights Reserved.
    */

   /*
    *      nfs4_prot.x
    *
    */

   %#pragma ident  "@(#)nfs4_prot.x        1.117"

   /*
    * Basic typedefs for RFC 1832 data type definitions
    */
   typedef int             int32_t;
   typedef unsigned int    uint32_t;
   typedef hyper           int64_t;
   typedef unsigned hyper  uint64_t;

   /*
    * Sizes
    */
   const NFS4_FHSIZE               = 128;
   const NFS4_VERIFIER_SIZE        = 8;
   const NFS4_OPAQUE_LIMIT         = 1024;

   /*
    * File types
    */
   enum nfs_ftype4 {
           NF4REG          = 1,    /* Regular File */
           NF4DIR          = 2,    /* Directory */
           NF4BLK          = 3,    /* Special File - block device */
           NF4CHR          = 4,    /* Special File - character device */
           NF4LNK          = 5,    /* Symbolic Link */
           NF4SOCK         = 6,    /* Special File - socket */
           NF4FIFO         = 7,    /* Special File - fifo */
           NF4ATTRDIR      = 8,    /* Attribute Directory */
           NF4NAMEDATTR    = 9     /* Named Attribute */
   };

   /*
    * Error status
    */
   enum nfsstat4 {
           NFS4_OK                 = 0,    /* everything is okay      */
           NFS4ERR_PERM            = 1,    /* caller not privileged   */
           NFS4ERR_NOENT           = 2,    /* no such file/directory  */
           NFS4ERR_IO              = 5,    /* hard I/O error          */


Expires: February 2003                                        [Page 239]


Draft Specification      NFS version 4 Protocol              August 2002


           NFS4ERR_NXIO            = 6,    /* no such device          */
           NFS4ERR_ACCESS          = 13,   /* access denied           */
           NFS4ERR_EXIST           = 17,   /* file already exists     */
           NFS4ERR_XDEV            = 18,   /* different filesystems   */
           NFS4ERR_NODEV           = 19,   /* no such device          */
           NFS4ERR_NOTDIR          = 20,   /* should be a directory   */
           NFS4ERR_ISDIR           = 21,   /* should not be directory */
           NFS4ERR_INVAL           = 22,   /* invalid argument        */
           NFS4ERR_FBIG            = 27,   /* file exceeds server max */
           NFS4ERR_NOSPC           = 28,   /* no space on filesystem  */
           NFS4ERR_ROFS            = 30,   /* read-only filesystem    */
           NFS4ERR_MLINK           = 31,   /* too many hard links     */
           NFS4ERR_NAMETOOLONG     = 63,   /* name exceeds server max */
           NFS4ERR_NOTEMPTY        = 66,   /* directory not empty     */
           NFS4ERR_DQUOT           = 69,   /* hard quota limit reached*/
           NFS4ERR_STALE           = 70,   /* file no longer exists   */
           NFS4ERR_BADHANDLE       = 10001,/* Illegal filehandle      */
           NFS4ERR_BAD_COOKIE      = 10003,/* READDIR cookie is stale */
           NFS4ERR_NOTSUPP         = 10004,/* operation not supported */
           NFS4ERR_TOOSMALL        = 10005,/* buffer too small        */
           NFS4ERR_SERVERFAULT     = 10006,/* undefined server error  */
           NFS4ERR_BADTYPE         = 10007,/* type invalide for CREATE*/
           NFS4ERR_DELAY           = 10008,/* file "busy" - retry     */
           NFS4ERR_SAME            = 10009,/* nverify says attrs same */
           NFS4ERR_DENIED          = 10010,/* lock unavailable        */
           NFS4ERR_EXPIRED         = 10011,/* lock lease expired      */
           NFS4ERR_LOCKED          = 10012,/* I/O failed due to lock  */
           NFS4ERR_GRACE           = 10013,/* in grace period         */
           NFS4ERR_FHEXPIRED       = 10014,/* filehandle expired      */
           NFS4ERR_SHARE_DENIED    = 10015,/* share reserve denied    */
           NFS4ERR_WRONGSEC        = 10016,/* wrong security flavor   */
           NFS4ERR_CLID_INUSE      = 10017,/* clientid in use         */
           NFS4ERR_RESOURCE        = 10018,/* resource exhaustion     */
           NFS4ERR_MOVED           = 10019,/* filesystem relocated    */
           NFS4ERR_NOFILEHANDLE    = 10020,/* current FH is not set   */
           NFS4ERR_MINOR_VERS_MISMATCH = 10021,/* minor vers not supp */
           NFS4ERR_STALE_CLIENTID  = 10022,/* server has rebooted     */
           NFS4ERR_STALE_STATEID   = 10023,/* server has rebooted     */
           NFS4ERR_OLD_STATEID     = 10024,/* state is out of sync    */
           NFS4ERR_BAD_STATEID     = 10025,/* incorrect stateid       */
           NFS4ERR_BAD_SEQID       = 10026,/* request is out of seq.  */
           NFS4ERR_NOT_SAME        = 10027,/* verify - attrs not same */
           NFS4ERR_LOCK_RANGE      = 10028,/* lock range not supported*/
           NFS4ERR_SYMLINK         = 10029,/* should be file/directory*/
           NFS4ERR_READDIR_NOSPC   = 10030,/* response limit exceeded */
           NFS4ERR_LEASE_MOVED     = 10031,/* some filesystem moved   */
           NFS4ERR_ATTRNOTSUPP     = 10032,/* recommended attr not sup*/
           NFS4ERR_NO_GRACE        = 10033,/* reclaim outside of grace*/
           NFS4ERR_RECLAIM_BAD     = 10034,/* reclaim error at server */
           NFS4ERR_RECLAIM_CONFLICT = 10035,/* conflict on reclaim    */
           NFS4ERR_BADXDR          = 10036,/* XDR decode failed       */
           NFS4ERR_LOCKS_HELD      = 10037,/* file lcoks held at CLOSE*/


Expires: February 2003                                        [Page 240]


Draft Specification      NFS version 4 Protocol              August 2002


           NFS4ERR_OPENMODE        = 10038,/* conflict in OPEN and I/O*/
           NFS4ERR_BADOWNER        = 10039,/* owner translation bad   */
           NFS4ERR_BADCHAR         = 10040,/* utf-8 char not supported*/
           NFS4ERR_BADNAME         = 10041,/* name not supported      */
           NFS4ERR_BAD_RANGE       = 10042,/* lock range not supported*/
           NFS4ERR_LOCK_NOTSUPP    = 10043,/* no atomic up/downgrade  */
           NFS4ERR_OP_ILLEGAL      = 10044,/* undefined operation     */
           NFS4ERR_DEADLOCK        = 10045,/* file locking deadlock   */
           NFS4ERR_FILE_OPEN       = 10046 /* open file blocks op.    */
   };

   /*
    * Basic data types
    */
   typedef uint32_t        bitmap4<>;
   typedef uint64_t        offset4;
   typedef uint32_t        count4;
   typedef uint64_t        length4;
   typedef uint64_t        clientid4;
   typedef uint32_t        seqid4;
   typedef opaque          utf8string<>;
   typedef utf8string      component4;
   typedef component4      pathname4<>;
   typedef uint64_t        nfs_lockid4;
   typedef uint64_t        nfs_cookie4;
   typedef utf8string      linktext4;
   typedef opaque          sec_oid4<>;
   typedef uint32_t        qop4;
   typedef uint32_t        mode4;
   typedef uint64_t        changeid4;
   typedef opaque          verifier4[NFS4_VERIFIER_SIZE];

   /*
    * Timeval
    */
   struct nfstime4 {
           int64_t         seconds;
           uint32_t        nseconds;
   };

   enum time_how4 {
           SET_TO_SERVER_TIME4 = 0,
           SET_TO_CLIENT_TIME4 = 1
   };

   union settime4 switch (time_how4 set_it) {
    case SET_TO_CLIENT_TIME4:
            nfstime4       time;
    default:
            void;
   };



Expires: February 2003                                        [Page 241]


Draft Specification      NFS version 4 Protocol              August 2002


   /*
    * File access handle
    */
   typedef opaque  nfs_fh4<NFS4_FHSIZE>;


   /*
    * File attribute definitions
    */

   /*
    * FSID structure for major/minor
    */
   struct fsid4 {
           uint64_t        major;
           uint64_t        minor;
   };

   /*
    * Filesystem locations attribute for relocation/migration
    */
   struct fs_location4 {
           utf8string      server<>;
           pathname4       rootpath;
   };

   struct fs_locations4 {
           pathname4       fs_root;
           fs_location4    locations<>;
   };

   /*
    * Various Access Control Entry definitions
    */

   /*
    * Mask that indicates which Access Control Entries are supported.
    * Values for the fattr4_aclsupport attribute.
    */
   const ACL4_SUPPORT_ALLOW_ACL    = 0x00000001;
   const ACL4_SUPPORT_DENY_ACL     = 0x00000002;
   const ACL4_SUPPORT_AUDIT_ACL    = 0x00000004;
   const ACL4_SUPPORT_ALARM_ACL    = 0x00000008;


   typedef uint32_t        acetype4;

   /*
    * acetype4 values, others can be added as needed.
    */
   const ACE4_ACCESS_ALLOWED_ACE_TYPE      = 0x00000000;
   const ACE4_ACCESS_DENIED_ACE_TYPE       = 0x00000001;


Expires: February 2003                                        [Page 242]


Draft Specification      NFS version 4 Protocol              August 2002


   const ACE4_SYSTEM_AUDIT_ACE_TYPE        = 0x00000002;
   const ACE4_SYSTEM_ALARM_ACE_TYPE        = 0x00000003;


   /*
    * ACE flag
    */
   typedef uint32_t aceflag4;

   /*
    * ACE flag values
    */
   const ACE4_FILE_INHERIT_ACE             = 0x00000001;
   const ACE4_DIRECTORY_INHERIT_ACE        = 0x00000002;
   const ACE4_NO_PROPAGATE_INHERIT_ACE     = 0x00000004;
   const ACE4_INHERIT_ONLY_ACE             = 0x00000008;
   const ACE4_SUCCESSFUL_ACCESS_ACE_FLAG   = 0x00000010;
   const ACE4_FAILED_ACCESS_ACE_FLAG       = 0x00000020;
   const ACE4_IDENTIFIER_GROUP             = 0x00000040;


   /*
    * ACE mask
    */
   typedef uint32_t        acemask4;

   /*
    * ACE mask values
    */
   const ACE4_READ_DATA            = 0x00000001;
   const ACE4_LIST_DIRECTORY       = 0x00000001;
   const ACE4_WRITE_DATA           = 0x00000002;
   const ACE4_ADD_FILE             = 0x00000002;
   const ACE4_APPEND_DATA          = 0x00000004;
   const ACE4_ADD_SUBDIRECTORY     = 0x00000004;
   const ACE4_READ_NAMED_ATTRS     = 0x00000008;
   const ACE4_WRITE_NAMED_ATTRS    = 0x00000010;
   const ACE4_EXECUTE              = 0x00000020;
   const ACE4_DELETE_CHILD         = 0x00000040;
   const ACE4_READ_ATTRIBUTES      = 0x00000080;
   const ACE4_WRITE_ATTRIBUTES     = 0x00000100;

   const ACE4_DELETE               = 0x00010000;
   const ACE4_READ_ACL             = 0x00020000;
   const ACE4_WRITE_ACL            = 0x00040000;
   const ACE4_WRITE_OWNER          = 0x00080000;
   const ACE4_SYNCHRONIZE          = 0x00100000;

   /*
    * ACE4_GENERIC_READ -- defined as combination of
    *      ACE4_READ_ACL |
    *      ACE4_READ_DATA |


Expires: February 2003                                        [Page 243]


Draft Specification      NFS version 4 Protocol              August 2002


    *      ACE4_READ_ATTRIBUTES |
    *      ACE4_SYNCHRONIZE
    */

   const ACE4_GENERIC_READ = 0x00120081;

   /*
    * ACE4_GENERIC_WRITE -- defined as combination of
    *      ACE4_READ_ACL |
    *      ACE4_WRITE_DATA |
    *      ACE4_WRITE_ATTRIBUTES |
    *      ACE4_WRITE_ACL |
    *      ACE4_APPEND_DATA |
    *      ACE4_SYNCHRONIZE
    */
   const ACE4_GENERIC_WRITE = 0x00160106;


   /*
    * ACE4_GENERIC_EXECUTE -- defined as combination of
    *      ACE4_READ_ACL
    *      ACE4_READ_ATTRIBUTES
    *      ACE4_EXECUTE
    *      ACE4_SYNCHRONIZE
    */
   const ACE4_GENERIC_EXECUTE = 0x001200A0;


   /*
    * Access Control Entry definition
    */
   struct nfsace4 {
           acetype4        type;
           aceflag4        flag;
           acemask4        access_mask;
           utf8string      who;
   };

   /*
    * Field definitions for the fattr4_mode attribute
    */
   const MODE4_SUID = 0x800;  /* set user id on execution */
   const MODE4_SGID = 0x400;  /* set group id on execution */
   const MODE4_SVTX = 0x200;  /* save text even after use */
   const MODE4_RUSR = 0x100;  /* read permission: owner */
   const MODE4_WUSR = 0x080;  /* write permission: owner */
   const MODE4_XUSR = 0x040;  /* execute permission: owner */
   const MODE4_RGRP = 0x020;  /* read permission: group */
   const MODE4_WGRP = 0x010;  /* write permission: group */
   const MODE4_XGRP = 0x008;  /* execute permission: group */
   const MODE4_ROTH = 0x004;  /* read permission: other */
   const MODE4_WOTH = 0x002;  /* write permission: other */


Expires: February 2003                                        [Page 244]


Draft Specification      NFS version 4 Protocol              August 2002


   const MODE4_XOTH = 0x001;  /* execute permission: other */

   /*
    * Special data/attribute associated with
    * file types NF4BLK and NF4CHR.
    */
   struct specdata4 {
           uint32_t        specdata1;      /* major device number */
           uint32_t        specdata2;      /* minor device number */
   };

   /*
    * Values for fattr4_fh_expire_type
    */
   const   FH4_PERSISTENT          = 0x00000000;
   const   FH4_NOEXPIRE_WITH_OPEN  = 0x00000001;
   const   FH4_VOLATILE_ANY        = 0x00000002;
   const   FH4_VOL_MIGRATION       = 0x00000004;
   const   FH4_VOL_RENAME          = 0x00000008;


   typedef bitmap4         fattr4_supported_attrs;
   typedef nfs_ftype4      fattr4_type;
   typedef uint32_t        fattr4_fh_expire_type;
   typedef changeid4       fattr4_change;
   typedef uint64_t        fattr4_size;
   typedef bool            fattr4_link_support;
   typedef bool            fattr4_symlink_support;
   typedef bool            fattr4_named_attr;
   typedef fsid4           fattr4_fsid;
   typedef bool            fattr4_unique_handles;
   typedef uint32_t        fattr4_lease_time;
   typedef nfsstat4        fattr4_rdattr_error;

   typedef nfsace4         fattr4_acl<>;
   typedef uint32_t        fattr4_aclsupport;
   typedef bool            fattr4_archive;
   typedef bool            fattr4_cansettime;
   typedef bool            fattr4_case_insensitive;
   typedef bool            fattr4_case_preserving;
   typedef bool            fattr4_chown_restricted;
   typedef uint64_t        fattr4_fileid;
   typedef uint64_t        fattr4_files_avail;
   typedef nfs_fh4         fattr4_filehandle;
   typedef uint64_t        fattr4_files_free;
   typedef uint64_t        fattr4_files_total;
   typedef fs_locations4   fattr4_fs_locations;
   typedef bool            fattr4_hidden;
   typedef bool            fattr4_homogeneous;
   typedef uint64_t        fattr4_maxfilesize;
   typedef uint32_t        fattr4_maxlink;
   typedef uint32_t        fattr4_maxname;


Expires: February 2003                                        [Page 245]


Draft Specification      NFS version 4 Protocol              August 2002


   typedef uint64_t        fattr4_maxread;
   typedef uint64_t        fattr4_maxwrite;
   typedef utf8string      fattr4_mimetype;
   typedef mode4           fattr4_mode;
   typedef uint64_t        fattr4_mounted_on_fileid;
   typedef bool            fattr4_no_trunc;
   typedef uint32_t        fattr4_numlinks;
   typedef utf8string      fattr4_owner;
   typedef utf8string      fattr4_owner_group;
   typedef uint64_t        fattr4_quota_avail_hard;
   typedef uint64_t        fattr4_quota_avail_soft;
   typedef uint64_t        fattr4_quota_used;
   typedef specdata4       fattr4_rawdev;
   typedef uint64_t        fattr4_space_avail;
   typedef uint64_t        fattr4_space_free;
   typedef uint64_t        fattr4_space_total;
   typedef uint64_t        fattr4_space_used;
   typedef bool            fattr4_system;
   typedef nfstime4        fattr4_time_access;
   typedef settime4        fattr4_time_access_set;
   typedef nfstime4        fattr4_time_backup;
   typedef nfstime4        fattr4_time_create;
   typedef nfstime4        fattr4_time_delta;
   typedef nfstime4        fattr4_time_metadata;
   typedef nfstime4        fattr4_time_modify;
   typedef settime4        fattr4_time_modify_set;


   /*
    * Mandatory Attributes
    */
   const FATTR4_SUPPORTED_ATTRS    = 0;
   const FATTR4_TYPE               = 1;
   const FATTR4_FH_EXPIRE_TYPE     = 2;
   const FATTR4_CHANGE             = 3;
   const FATTR4_SIZE               = 4;
   const FATTR4_LINK_SUPPORT       = 5;
   const FATTR4_SYMLINK_SUPPORT    = 6;
   const FATTR4_NAMED_ATTR         = 7;
   const FATTR4_FSID               = 8;
   const FATTR4_UNIQUE_HANDLES     = 9;
   const FATTR4_LEASE_TIME         = 10;
   const FATTR4_RDATTR_ERROR       = 11;
   const FATTR4_FILEHANDLE         = 19;

   /*
    * Recommended Attributes
    */
   const FATTR4_ACL                = 12;
   const FATTR4_ACLSUPPORT         = 13;
   const FATTR4_ARCHIVE            = 14;
   const FATTR4_CANSETTIME         = 15;


Expires: February 2003                                        [Page 246]


Draft Specification      NFS version 4 Protocol              August 2002


   const FATTR4_CASE_INSENSITIVE   = 16;
   const FATTR4_CASE_PRESERVING    = 17;
   const FATTR4_CHOWN_RESTRICTED   = 18;
   const FATTR4_FILEID             = 20;
   const FATTR4_FILES_AVAIL        = 21;
   const FATTR4_FILES_FREE         = 22;
   const FATTR4_FILES_TOTAL        = 23;
   const FATTR4_FS_LOCATIONS       = 24;
   const FATTR4_HIDDEN             = 25;
   const FATTR4_HOMOGENEOUS        = 26;
   const FATTR4_MAXFILESIZE        = 27;
   const FATTR4_MAXLINK            = 28;
   const FATTR4_MAXNAME            = 29;
   const FATTR4_MAXREAD            = 30;
   const FATTR4_MAXWRITE           = 31;
   const FATTR4_MIMETYPE           = 32;
   const FATTR4_MODE               = 33;
   const FATTR4_NO_TRUNC           = 34;
   const FATTR4_NUMLINKS           = 35;
   const FATTR4_OWNER              = 36;
   const FATTR4_OWNER_GROUP        = 37;
   const FATTR4_QUOTA_AVAIL_HARD   = 38;
   const FATTR4_QUOTA_AVAIL_SOFT   = 39;
   const FATTR4_QUOTA_USED         = 40;
   const FATTR4_RAWDEV             = 41;
   const FATTR4_SPACE_AVAIL        = 42;
   const FATTR4_SPACE_FREE         = 43;
   const FATTR4_SPACE_TOTAL        = 44;
   const FATTR4_SPACE_USED         = 45;
   const FATTR4_SYSTEM             = 46;
   const FATTR4_TIME_ACCESS        = 47;
   const FATTR4_TIME_ACCESS_SET    = 48;
   const FATTR4_TIME_BACKUP        = 49;
   const FATTR4_TIME_CREATE        = 50;
   const FATTR4_TIME_DELTA         = 51;
   const FATTR4_TIME_METADATA      = 52;
   const FATTR4_TIME_MODIFY        = 53;
   const FATTR4_TIME_MODIFY_SET    = 54;
   const FATTR4_MOUNTED_ON_FILEID  = 55;

   typedef opaque  attrlist4<>;

   /*
    * File attribute container
    */
   struct fattr4 {
           bitmap4         attrmask;
           attrlist4       attr_vals;
   };

   /*
    * Change info for the client


Expires: February 2003                                        [Page 247]


Draft Specification      NFS version 4 Protocol              August 2002


    */
   struct change_info4 {
           bool            atomic;
           changeid4       before;
           changeid4       after;
   };

   struct clientaddr4 {
           /* see struct rpcb in RFC 1833 */
           string r_netid<>;               /* network id */
           string r_addr<>;                /* universal address */
   };

   /*
    * Callback program info as provided by the client
    */
   struct cb_client4 {
           uint32_t        cb_program;
           clientaddr4     cb_location;
   };

   /*
    * Stateid
    */
   struct stateid4 {
           uint32_t        seqid;
           opaque          other[12];
   };

   /*
    * Client ID
    */
   struct nfs_client_id4 {
           verifier4       verifier;
           opaque          id<NFS4_OPAQUE_LIMIT>;
   };

   struct open_owner4 {
           clientid4       clientid;
           opaque          owner<NFS4_OPAQUE_LIMIT>;
   };

   struct lock_owner4 {
           clientid4       clientid;
           opaque          owner<NFS4_OPAQUE_LIMIT>;
   };

   enum nfs_lock_type4 {
           READ_LT         = 1,
           WRITE_LT        = 2,
           READW_LT        = 3,    /* blocking read */
           WRITEW_LT       = 4     /* blocking write */


Expires: February 2003                                        [Page 248]


Draft Specification      NFS version 4 Protocol              August 2002


   };

   /*
    * ACCESS: Check access permission
    */
   const ACCESS4_READ      = 0x00000001;
   const ACCESS4_LOOKUP    = 0x00000002;
   const ACCESS4_MODIFY    = 0x00000004;
   const ACCESS4_EXTEND    = 0x00000008;
   const ACCESS4_DELETE    = 0x00000010;
   const ACCESS4_EXECUTE   = 0x00000020;

   struct ACCESS4args {
           /* CURRENT_FH: object */
           uint32_t        access;
   };

   struct ACCESS4resok {
           uint32_t        supported;
           uint32_t        access;
   };

   union ACCESS4res switch (nfsstat4 status) {
    case NFS4_OK:
            ACCESS4resok   resok4;
    default:
            void;
   };

   /*
    * CLOSE: Close a file and release share reservations
    */
   struct CLOSE4args {
           /* CURRENT_FH: object */
           seqid4          seqid;
           stateid4        open_stateid;
   };

   union CLOSE4res switch (nfsstat4 status) {
    case NFS4_OK:
            stateid4       open_stateid;
    default:
            void;
   };

   /*
    * COMMIT: Commit cached data on server to stable storage
    */
   struct COMMIT4args {
           /* CURRENT_FH: file */
           offset4         offset;
           count4          count;


Expires: February 2003                                        [Page 249]


Draft Specification      NFS version 4 Protocol              August 2002


   };

   struct COMMIT4resok {
           verifier4       writeverf;
   };


   union COMMIT4res switch (nfsstat4 status) {
    case NFS4_OK:
            COMMIT4resok   resok4;
    default:
            void;
   };

   /*
    * CREATE: Create a non-regular file
    */
   union createtype4 switch (nfs_ftype4 type) {
    case NF4LNK:
            linktext4      linkdata;
    case NF4BLK:
    case NF4CHR:
            specdata4      devdata;
    case NF4SOCK:
    case NF4FIFO:
    case NF4DIR:
            void;
    default:
            void;          /* server should return NFS4ERR_BADTYPE */
   };

   struct CREATE4args {
           /* CURRENT_FH: directory for creation */
           createtype4     objtype;
           component4      objname;
           fattr4          createattrs;
   };

   struct CREATE4resok {
           change_info4    cinfo;
           bitmap4         attrset;        /* attributes set */
   };

   union CREATE4res switch (nfsstat4 status) {
    case NFS4_OK:
            CREATE4resok resok4;
    default:
            void;
   };

   /*
    * DELEGPURGE: Purge Delegations Awaiting Recovery


Expires: February 2003                                        [Page 250]


Draft Specification      NFS version 4 Protocol              August 2002


    */
   struct DELEGPURGE4args {
           clientid4       clientid;
   };

   struct DELEGPURGE4res {
           nfsstat4        status;
   };

   /*
    * DELEGRETURN: Return a delegation
    */
   struct DELEGRETURN4args {
           /* CURRENT_FH: delegated file */
           stateid4        deleg_stateid;
   };

   struct DELEGRETURN4res {
           nfsstat4        status;
   };

   /*
    * GETATTR: Get file attributes
    */
   struct GETATTR4args {
           /* CURRENT_FH: directory or file */
           bitmap4         attr_request;
   };

   struct GETATTR4resok {
           fattr4          obj_attributes;
   };

   union GETATTR4res switch (nfsstat4 status) {
    case NFS4_OK:
            GETATTR4resok  resok4;
    default:
            void;
   };

   /*
    * GETFH: Get current filehandle
    */
   struct GETFH4resok {
           nfs_fh4         object;
   };

   union GETFH4res switch (nfsstat4 status) {
    case NFS4_OK:
           GETFH4resok     resok4;
    default:
           void;


Expires: February 2003                                        [Page 251]


Draft Specification      NFS version 4 Protocol              August 2002


   };

   /*
    * LINK: Create link to an object
    */
   struct LINK4args {
           /* SAVED_FH: source object */
           /* CURRENT_FH: target directory */
           component4      newname;
   };

   struct LINK4resok {
           change_info4    cinfo;
   };

   union LINK4res switch (nfsstat4 status) {
    case NFS4_OK:
            LINK4resok resok4;
    default:
            void;
   };

   /*
    * For LOCK, transition from open_owner to new lock_owner
    */
   struct open_to_lock_owner4 {
           seqid4          open_seqid;
           stateid4        open_stateid;
           seqid4          lock_seqid;
           lock_owner4     lock_owner;
   };

   /*
    * For LOCK, existing lock_owner continues to request file locks
    */
   struct exist_lock_owner4 {
           stateid4        lock_stateid;
           seqid4          lock_seqid;
   };

   union locker4 switch (bool new_lock_owner) {
    case TRUE:
           open_to_lock_owner4     open_owner;
    case FALSE:
           exist_lock_owner4       lock_owner;
   };

   /*
    * LOCK/LOCKT/LOCKU: Record lock management
    */
   struct LOCK4args {
           /* CURRENT_FH: file */


Expires: February 2003                                        [Page 252]


Draft Specification      NFS version 4 Protocol              August 2002


           nfs_lock_type4  locktype;
           bool            reclaim;
           offset4         offset;
           length4         length;
           locker4         locker;
   };

   struct LOCK4denied {
           offset4         offset;
           length4         length;
           nfs_lock_type4  locktype;
           lock_owner4     owner;
   };

   struct LOCK4resok {
           stateid4        lock_stateid;
   };

   union LOCK4res switch (nfsstat4 status) {
    case NFS4_OK:
            LOCK4resok     resok4;
    case NFS4ERR_DENIED:
            LOCK4denied    denied;
    default:
            void;
   };

   struct LOCKT4args {
           /* CURRENT_FH: file */
           nfs_lock_type4  locktype;
           offset4         offset;
           length4         length;
           lock_owner4     owner;
   };

   union LOCKT4res switch (nfsstat4 status) {
    case NFS4ERR_DENIED:
            LOCK4denied    denied;
    case NFS4_OK:
            void;
    default:
            void;
   };

   struct LOCKU4args {
           /* CURRENT_FH: file */
           nfs_lock_type4  locktype;
           seqid4          seqid;
           stateid4        lock_stateid;
           offset4         offset;
           length4         length;
   };


Expires: February 2003                                        [Page 253]


Draft Specification      NFS version 4 Protocol              August 2002


   union LOCKU4res switch (nfsstat4 status) {
    case   NFS4_OK:
            stateid4       lock_stateid;
    default:
            void;
   };

   /*
    * LOOKUP: Lookup filename
    */
   struct LOOKUP4args {
           /* CURRENT_FH: directory */
           component4      objname;
   };

   struct LOOKUP4res {
           /* CURRENT_FH: object */
           nfsstat4        status;
   };

   /*
    * LOOKUPP: Lookup parent directory
    */
   struct LOOKUPP4res {
           /* CURRENT_FH: directory */
           nfsstat4        status;
   };

   /*
    * NVERIFY: Verify attributes different
    */
   struct NVERIFY4args {
           /* CURRENT_FH: object */
           fattr4          obj_attributes;
   };

   struct NVERIFY4res {
           nfsstat4        status;
   };

   /*
    * Various definitions for OPEN
    */
   enum createmode4 {
           UNCHECKED4      = 0,
           GUARDED4        = 1,
           EXCLUSIVE4      = 2
   };

   union createhow4 switch (createmode4 mode) {
    case UNCHECKED4:
    case GUARDED4:


Expires: February 2003                                        [Page 254]


Draft Specification      NFS version 4 Protocol              August 2002


            fattr4         createattrs;
    case EXCLUSIVE4:
            verifier4      createverf;
   };

   enum opentype4 {
           OPEN4_NOCREATE  = 0,
           OPEN4_CREATE    = 1
   };

   union openflag4 switch (opentype4 opentype) {
    case OPEN4_CREATE:
            createhow4     how;
    default:
            void;
   };

   /* Next definitions used for OPEN delegation */
   enum limit_by4 {
           NFS_LIMIT_SIZE          = 1,
           NFS_LIMIT_BLOCKS        = 2
           /* others as needed */
   };

   struct nfs_modified_limit4 {
           uint32_t        num_blocks;
           uint32_t        bytes_per_block;
   };

   union nfs_space_limit4 switch (limit_by4 limitby) {
    /* limit specified as file size */
    case NFS_LIMIT_SIZE:
            uint64_t               filesize;
    /* limit specified by number of blocks */
    case NFS_LIMIT_BLOCKS:
            nfs_modified_limit4    mod_blocks;
   } ;

   /*
    * Share Access and Deny constants for open argument
    */
   const OPEN4_SHARE_ACCESS_READ   = 0x00000001;
   const OPEN4_SHARE_ACCESS_WRITE  = 0x00000002;
   const OPEN4_SHARE_ACCESS_BOTH   = 0x00000003;

   const OPEN4_SHARE_DENY_NONE     = 0x00000000;
   const OPEN4_SHARE_DENY_READ     = 0x00000001;
   const OPEN4_SHARE_DENY_WRITE    = 0x00000002;
   const OPEN4_SHARE_DENY_BOTH     = 0x00000003;

   enum open_delegation_type4 {
           OPEN_DELEGATE_NONE      = 0,


Expires: February 2003                                        [Page 255]


Draft Specification      NFS version 4 Protocol              August 2002


           OPEN_DELEGATE_READ      = 1,
           OPEN_DELEGATE_WRITE     = 2
   };

   enum open_claim_type4 {
           CLAIM_NULL              = 0,
           CLAIM_PREVIOUS          = 1,
           CLAIM_DELEGATE_CUR      = 2,
           CLAIM_DELEGATE_PREV     = 3
   };

   struct open_claim_delegate_cur4 {
           stateid4        delegate_stateid;
           component4      file;
   };

   union open_claim4 switch (open_claim_type4 claim) {
    /*
     * No special rights to file. Ordinary OPEN of the specified file.
     */
    case CLAIM_NULL:
           /* CURRENT_FH: directory */
           component4      file;

    /*
     * Right to the file established by an open previous to server
     * reboot.  File identified by filehandle obtained at that time
     * rather than by name.
     */
    case CLAIM_PREVIOUS:
           /* CURRENT_FH: file being reclaimed */
           open_delegation_type4   delegate_type;

    /*
     * Right to file based on a delegation granted by the server.
     * File is specified by name.
     */
    case CLAIM_DELEGATE_CUR:
           /* CURRENT_FH: directory */
           open_claim_delegate_cur4        delegate_cur_info;

    /* Right to file based on a delegation granted to a previous boot
     * instance of the client.  File is specified by name.
     */
    case CLAIM_DELEGATE_PREV:
            /* CURRENT_FH: directory */
           component4      file_delegate_prev;
   };

   /*
    * OPEN: Open a file, potentially receiving an open delegation
    */


Expires: February 2003                                        [Page 256]


Draft Specification      NFS version 4 Protocol              August 2002


   struct OPEN4args {
           seqid4          seqid;
           uint32_t        share_access;
           uint32_t        share_deny;
           open_owner4     owner;
           openflag4       openhow;
           open_claim4     claim;
   };

   struct open_read_delegation4 {
           stateid4        stateid;        /* Stateid for delegation*/
           bool            recall;         /* Pre-recalled flag for
                                              delegations obtained
                                              by reclaim
                                              (CLAIM_PREVIOUS) */
           nfsace4         permissions;    /* Defines users who don't
                                              need an ACCESS call to
                                              open for read */
   };

   struct open_write_delegation4 {
           stateid4        stateid;        /* Stateid for delegation */
           bool            recall;         /* Pre-recalled flag for
                                              delegations obtained
                                              by reclaim
                                              (CLAIM_PREVIOUS) */
           nfs_space_limit4 space_limit;   /* Defines condition that
                                              the client must check to
                                              determine whether the
                                              file needs to be flushed
                                              to the server on close.
                                              */
           nfsace4         permissions;    /* Defines users who don't
                                              need an ACCESS call as
                                              part of a delegated
                                              open. */
   };

   union open_delegation4
   switch (open_delegation_type4 delegation_type) {
           case OPEN_DELEGATE_NONE:
                   void;
           case OPEN_DELEGATE_READ:
                   open_read_delegation4 read;
           case OPEN_DELEGATE_WRITE:
                   open_write_delegation4 write;
   };

   /*
    * Result flags
    */
   /* Client must confirm open */


Expires: February 2003                                        [Page 257]


Draft Specification      NFS version 4 Protocol              August 2002


   const OPEN4_RESULT_CONFIRM      = 0x00000002;
   /* Type of file locking behavior at the server */
   const OPEN4_RESULT_LOCKTYPE_POSIX = 0x00000004;

   struct OPEN4resok {
           stateid4        stateid;        /* Stateid for open */
           change_info4    cinfo;          /* Directory Change Info */
           uint32_t        rflags;         /* Result flags */
           bitmap4         attrset;        /* attribute set for create*/
           open_delegation4 delegation;    /* Info on any open
                                              delegation */
   };

   union OPEN4res switch (nfsstat4 status) {
    case NFS4_OK:
           /* CURRENT_FH: opened file */
           OPEN4resok      resok4;
    default:
           void;
   };

   /*
    * OPENATTR: open named attributes directory
    */
   struct OPENATTR4args {
           /* CURRENT_FH: object */
           bool    createdir;
   };

   struct OPENATTR4res {
           /* CURRENT_FH: named attr directory */
           nfsstat4        status;
   };

   /*
    * OPEN_CONFIRM: confirm the open
    */
   struct OPEN_CONFIRM4args {
           /* CURRENT_FH: opened file */
           stateid4        open_stateid;
           seqid4          seqid;
   };

   struct OPEN_CONFIRM4resok {
           stateid4        open_stateid;
   };

   union OPEN_CONFIRM4res switch (nfsstat4 status) {
    case NFS4_OK:
            OPEN_CONFIRM4resok     resok4;
    default:
            void;


Expires: February 2003                                        [Page 258]


Draft Specification      NFS version 4 Protocol              August 2002


   };

   /*
    * OPEN_DOWNGRADE: downgrade the access/deny for a file
    */
   struct OPEN_DOWNGRADE4args {
           /* CURRENT_FH: opened file */
           stateid4        open_stateid;
           seqid4          seqid;
           uint32_t        share_access;
           uint32_t        share_deny;
   };

   struct OPEN_DOWNGRADE4resok {
           stateid4        open_stateid;
   };

   union OPEN_DOWNGRADE4res switch(nfsstat4 status) {
    case NFS4_OK:
           OPEN_DOWNGRADE4resok    resok4;
    default:
            void;
   };

   /*
    * PUTFH: Set current filehandle
    */
   struct PUTFH4args {
           nfs_fh4         object;
   };

   struct PUTFH4res {
           /* CURRENT_FH: */
           nfsstat4        status;
   };

   /*
    * PUTPUBFH: Set public filehandle
    */
   struct PUTPUBFH4res {
           /* CURRENT_FH: public fh */
           nfsstat4        status;
   };

   /*
    * PUTROOTFH: Set root filehandle
    */
   struct PUTROOTFH4res {
           /* CURRENT_FH: root fh */
           nfsstat4        status;
   };



Expires: February 2003                                        [Page 259]


Draft Specification      NFS version 4 Protocol              August 2002


   /*
    * READ: Read from file
    */
   struct READ4args {
           /* CURRENT_FH: file */
           stateid4        stateid;
           offset4         offset;
           count4          count;
   };

   struct READ4resok {
           bool            eof;
           opaque          data<>;
   };

   union READ4res switch (nfsstat4 status) {
    case NFS4_OK:
            READ4resok     resok4;
    default:
            void;
   };

   /*
    * READDIR: Read directory
    */
   struct READDIR4args {
           /* CURRENT_FH: directory */
           nfs_cookie4     cookie;
           verifier4       cookieverf;
           count4          dircount;
           count4          maxcount;
           bitmap4         attr_request;
   };

   struct entry4 {
           nfs_cookie4     cookie;
           component4      name;
           fattr4          attrs;
           entry4          *nextentry;
   };

   struct dirlist4 {
           entry4          *entries;
           bool            eof;
   };

   struct READDIR4resok {
           verifier4       cookieverf;
           dirlist4        reply;
   };




Expires: February 2003                                        [Page 260]


Draft Specification      NFS version 4 Protocol              August 2002


   union READDIR4res switch (nfsstat4 status) {
    case NFS4_OK:
            READDIR4resok  resok4;
    default:
            void;
   };


   /*
    * READLINK: Read symbolic link
    */
   struct READLINK4resok {
           linktext4       link;
   };

   union READLINK4res switch (nfsstat4 status) {
    case NFS4_OK:
            READLINK4resok resok4;
    default:
            void;
   };

   /*
    * REMOVE: Remove filesystem object
    */
   struct REMOVE4args {
           /* CURRENT_FH: directory */
           component4      target;
   };

   struct REMOVE4resok {
           change_info4    cinfo;
   };

   union REMOVE4res switch (nfsstat4 status) {
    case NFS4_OK:
            REMOVE4resok   resok4;
    default:
            void;
   };

   /*
    * RENAME: Rename directory entry
    */
   struct RENAME4args {
           /* SAVED_FH: source directory */
           component4      oldname;
           /* CURRENT_FH: target directory */
           component4      newname;
   };

   struct RENAME4resok {


Expires: February 2003                                        [Page 261]


Draft Specification      NFS version 4 Protocol              August 2002


           change_info4    source_cinfo;
           change_info4    target_cinfo;
   };

   union RENAME4res switch (nfsstat4 status) {
    case NFS4_OK:
           RENAME4resok    resok4;
    default:
           void;
   };

   /*
    * RENEW: Renew a Lease
    */
   struct RENEW4args {
           clientid4       clientid;
   };

   struct RENEW4res {
           nfsstat4        status;
   };

   /*
    * RESTOREFH: Restore saved filehandle
    */

   struct RESTOREFH4res {
           /* CURRENT_FH: value of saved fh */
           nfsstat4        status;
   };

   /*
    * SAVEFH: Save current filehandle
    */
   struct SAVEFH4res {
           /* SAVED_FH: value of current fh */
           nfsstat4        status;
   };

   /*
    * SECINFO: Obtain Available Security Mechanisms
    */
   struct SECINFO4args {
           /* CURRENT_FH: directory */
           component4      name;
   };

   /*
    * From RFC 2203
    */
   enum rpc_gss_svc_t {
           RPC_GSS_SVC_NONE        = 1,


Expires: February 2003                                        [Page 262]


Draft Specification      NFS version 4 Protocol              August 2002


           RPC_GSS_SVC_INTEGRITY   = 2,
           RPC_GSS_SVC_PRIVACY     = 3
   };

   struct rpcsec_gss_info {
           sec_oid4        oid;
           qop4            qop;
           rpc_gss_svc_t   service;
   };

   /* RPCSEC_GSS has a value of '6' - See RFC 2203 */
   union secinfo4 switch (uint32_t flavor) {
    case RPCSEC_GSS:
            rpcsec_gss_info        flavor_info;
    default:
            void;
   };

   typedef secinfo4 SECINFO4resok<>;

   union SECINFO4res switch (nfsstat4 status) {
    case NFS4_OK:
            SECINFO4resok resok4;
    default:
            void;
   };

   /*
    * SETATTR: Set attributes
    */
   struct SETATTR4args {
           /* CURRENT_FH: target object */
           stateid4        stateid;
           fattr4          obj_attributes;
   };

   struct SETATTR4res {
           nfsstat4        status;
           bitmap4         attrsset;
   };

   /*
    * SETCLIENTID
    */
   struct SETCLIENTID4args {
           nfs_client_id4  client;
           cb_client4      callback;
           uint32_t        callback_ident;
   };

   struct SETCLIENTID4resok {
           clientid4       clientid;


Expires: February 2003                                        [Page 263]


Draft Specification      NFS version 4 Protocol              August 2002


           verifier4       setclientid_confirm;
   };

   union SETCLIENTID4res switch (nfsstat4 status) {
    case NFS4_OK:
            SETCLIENTID4resok      resok4;
    case NFS4ERR_CLID_INUSE:
            clientaddr4    client_using;
    default:
            void;
   };

   struct SETCLIENTID_CONFIRM4args {
           clientid4       clientid;
           verifier4       setclientid_confirm;
   };

   struct SETCLIENTID_CONFIRM4res {
           nfsstat4        status;
   };

   /*
    * VERIFY: Verify attributes same
    */
   struct VERIFY4args {
           /* CURRENT_FH: object */
           fattr4          obj_attributes;
   };

   struct VERIFY4res {
           nfsstat4        status;
   };

   /*
    * WRITE: Write to file
    */
   enum stable_how4 {
           UNSTABLE4       = 0,
           DATA_SYNC4      = 1,
           FILE_SYNC4      = 2
   };

   struct WRITE4args {
           /* CURRENT_FH: file */
           stateid4        stateid;
           offset4         offset;
           stable_how4     stable;
           opaque          data<>;
   };

   struct WRITE4resok {
           count4          count;


Expires: February 2003                                        [Page 264]


Draft Specification      NFS version 4 Protocol              August 2002


           stable_how4     committed;
           verifier4       writeverf;
   };

   union WRITE4res switch (nfsstat4 status) {
    case NFS4_OK:
            WRITE4resok    resok4;
    default:
            void;
   };

   /*
    * RELEASE_LOCKOWNER: Notify server to release lockowner
    */
   struct RELEASE_LOCKOWNER4args {
           lock_owner4     lock_owner;
   };

   struct RELEASE_LOCKOWNER4res {
           nfsstat4        status;
   };

   /*
    * ILLEGAL: Response for illegal operation numbers
    */
   struct ILLEGAL4res {
           nfsstat4        status;
   };

   /*
    * Operation arrays
    */

   enum nfs_opnum4 {
           OP_ACCESS               = 3,
           OP_CLOSE                = 4,
           OP_COMMIT               = 5,
           OP_CREATE               = 6,
           OP_DELEGPURGE           = 7,
           OP_DELEGRETURN          = 8,
           OP_GETATTR              = 9,
           OP_GETFH                = 10,
           OP_LINK                 = 11,
           OP_LOCK                 = 12,
           OP_LOCKT                = 13,
           OP_LOCKU                = 14,
           OP_LOOKUP               = 15,
           OP_LOOKUPP              = 16,
           OP_NVERIFY              = 17,
           OP_OPEN                 = 18,
           OP_OPENATTR             = 19,
           OP_OPEN_CONFIRM         = 20,


Expires: February 2003                                        [Page 265]


Draft Specification      NFS version 4 Protocol              August 2002


           OP_OPEN_DOWNGRADE       = 21,
           OP_PUTFH                = 22,
           OP_PUTPUBFH             = 23,
           OP_PUTROOTFH            = 24,
           OP_READ                 = 25,
           OP_READDIR              = 26,
           OP_READLINK             = 27,
           OP_REMOVE               = 28,
           OP_RENAME               = 29,
           OP_RENEW                = 30,
           OP_RESTOREFH            = 31,
           OP_SAVEFH               = 32,
           OP_SECINFO              = 33,
           OP_SETATTR              = 34,
           OP_SETCLIENTID          = 35,
           OP_SETCLIENTID_CONFIRM  = 36,
           OP_VERIFY               = 37,
           OP_WRITE                = 38,
           OP_RELEASE_LOCKOWNER    = 39,
           OP_ILLEGAL              = 10044
   };

   union nfs_argop4 switch (nfs_opnum4 argop) {
    case OP_ACCESS:        ACCESS4args opaccess;
    case OP_CLOSE:         CLOSE4args opclose;
    case OP_COMMIT:        COMMIT4args opcommit;
    case OP_CREATE:        CREATE4args opcreate;
    case OP_DELEGPURGE:    DELEGPURGE4args opdelegpurge;
    case OP_DELEGRETURN:   DELEGRETURN4args opdelegreturn;
    case OP_GETATTR:       GETATTR4args opgetattr;
    case OP_GETFH:         void;
    case OP_LINK:          LINK4args oplink;
    case OP_LOCK:          LOCK4args oplock;
    case OP_LOCKT:         LOCKT4args oplockt;
    case OP_LOCKU:         LOCKU4args oplocku;
    case OP_LOOKUP:        LOOKUP4args oplookup;
    case OP_LOOKUPP:       void;
    case OP_NVERIFY:       NVERIFY4args opnverify;
    case OP_OPEN:          OPEN4args opopen;
    case OP_OPENATTR:      OPENATTR4args opopenattr;
    case OP_OPEN_CONFIRM:  OPEN_CONFIRM4args opopen_confirm;
    case OP_OPEN_DOWNGRADE:        OPEN_DOWNGRADE4args opopen_downgrade;
    case OP_PUTFH:         PUTFH4args opputfh;
    case OP_PUTPUBFH:      void;
    case OP_PUTROOTFH:     void;
    case OP_READ:          READ4args opread;
    case OP_READDIR:       READDIR4args opreaddir;
    case OP_READLINK:      void;
    case OP_REMOVE:        REMOVE4args opremove;
    case OP_RENAME:        RENAME4args oprename;
    case OP_RENEW:         RENEW4args oprenew;
    case OP_RESTOREFH:     void;


Expires: February 2003                                        [Page 266]


Draft Specification      NFS version 4 Protocol              August 2002


    case OP_SAVEFH:        void;
    case OP_SECINFO:       SECINFO4args opsecinfo;
    case OP_SETATTR:       SETATTR4args opsetattr;
    case OP_SETCLIENTID:   SETCLIENTID4args opsetclientid;
    case OP_SETCLIENTID_CONFIRM:   SETCLIENTID_CONFIRM4args
                                           opsetclientid_confirm;
    case OP_VERIFY:        VERIFY4args opverify;
    case OP_WRITE:         WRITE4args opwrite;
    case OP_RELEASE_LOCKOWNER:     RELEASE_LOCKOWNER4args
                                       oprelease_lockowner;
    case OP_ILLEGAL:       void;
   };

   union nfs_resop4 switch (nfs_opnum4 resop){
    case OP_ACCESS:        ACCESS4res opaccess;
    case OP_CLOSE:         CLOSE4res opclose;
    case OP_COMMIT:        COMMIT4res opcommit;
    case OP_CREATE:        CREATE4res opcreate;
    case OP_DELEGPURGE:    DELEGPURGE4res opdelegpurge;
    case OP_DELEGRETURN:   DELEGRETURN4res opdelegreturn;
    case OP_GETATTR:       GETATTR4res opgetattr;
    case OP_GETFH:         GETFH4res opgetfh;
    case OP_LINK:          LINK4res oplink;
    case OP_LOCK:          LOCK4res oplock;
    case OP_LOCKT:         LOCKT4res oplockt;
    case OP_LOCKU:         LOCKU4res oplocku;
    case OP_LOOKUP:        LOOKUP4res oplookup;
    case OP_LOOKUPP:       LOOKUPP4res oplookupp;
    case OP_NVERIFY:       NVERIFY4res opnverify;
    case OP_OPEN:          OPEN4res opopen;
    case OP_OPENATTR:      OPENATTR4res opopenattr;
    case OP_OPEN_CONFIRM:  OPEN_CONFIRM4res opopen_confirm;
    case OP_OPEN_DOWNGRADE:        OPEN_DOWNGRADE4res opopen_downgrade;
    case OP_PUTFH:         PUTFH4res opputfh;
    case OP_PUTPUBFH:      PUTPUBFH4res opputpubfh;
    case OP_PUTROOTFH:     PUTROOTFH4res opputrootfh;
    case OP_READ:          READ4res opread;
    case OP_READDIR:       READDIR4res opreaddir;
    case OP_READLINK:      READLINK4res opreadlink;
    case OP_REMOVE:        REMOVE4res opremove;
    case OP_RENAME:        RENAME4res oprename;
    case OP_RENEW:         RENEW4res oprenew;
    case OP_RESTOREFH:     RESTOREFH4res oprestorefh;
    case OP_SAVEFH:        SAVEFH4res opsavefh;
    case OP_SECINFO:       SECINFO4res opsecinfo;
    case OP_SETATTR:       SETATTR4res opsetattr;
    case OP_SETCLIENTID:   SETCLIENTID4res opsetclientid;
    case OP_SETCLIENTID_CONFIRM:   SETCLIENTID_CONFIRM4res
                                           opsetclientid_confirm;
    case OP_VERIFY:        VERIFY4res opverify;
    case OP_WRITE:         WRITE4res opwrite;
    case OP_RELEASE_LOCKOWNER:     RELEASE_LOCKOWNER4res


Expires: February 2003                                        [Page 267]


Draft Specification      NFS version 4 Protocol              August 2002


                                       oprelease_lockowner;
    case OP_ILLEGAL:       ILLEGAL4res opillegal;
   };

   struct COMPOUND4args {
           utf8string      tag;
           uint32_t        minorversion;
           nfs_argop4      argarray<>;
   };

   struct COMPOUND4res {
           nfsstat4 status;
           utf8string      tag;
           nfs_resop4      resarray<>;
   };

   /*
    * Remote file service routines
    */
   program NFS4_PROGRAM {
           version NFS_V4 {
                   void
                           NFSPROC4_NULL(void) = 0;

                   COMPOUND4res
                           NFSPROC4_COMPOUND(COMPOUND4args) = 1;

           } = 4;
   } = 100003;



   /*
    * NFS4 Callback Procedure Definitions and Program
    */

   /*
    * CB_GETATTR: Get Current Attributes
    */
   struct CB_GETATTR4args {
           nfs_fh4 fh;
           bitmap4 attr_request;
   };

   struct CB_GETATTR4resok {
           fattr4  obj_attributes;
   };

   union CB_GETATTR4res switch (nfsstat4 status) {
    case NFS4_OK:
            CB_GETATTR4resok       resok4;
    default:


Expires: February 2003                                        [Page 268]


Draft Specification      NFS version 4 Protocol              August 2002


            void;
   };

   /*
    * CB_RECALL: Recall an Open Delegation
    */
   struct CB_RECALL4args {
           stateid4        stateid;
           bool            truncate;
           nfs_fh4         fh;
   };

   struct CB_RECALL4res {
           nfsstat4        status;
   };

   /*
    * CB_ILLEGAL: Response for illegal operation numbers
    */
   struct CB_ILLEGAL4res {
           nfsstat4        status;
   };

   /*
    * Various definitions for CB_COMPOUND
    */
   enum nfs_cb_opnum4 {
           OP_CB_GETATTR           = 3,
           OP_CB_RECALL            = 4,
           OP_CB_ILLEGAL           = 10044
   };

   union nfs_cb_argop4 switch (unsigned argop) {
    case OP_CB_GETATTR:    CB_GETATTR4args opcbgetattr;
    case OP_CB_RECALL:     CB_RECALL4args  opcbrecall;
    case OP_CB_ILLEGAL:    void;
   };

   union nfs_cb_resop4 switch (unsigned resop){
    case OP_CB_GETATTR:    CB_GETATTR4res  opcbgetattr;
    case OP_CB_RECALL:     CB_RECALL4res   opcbrecall;
    case OP_CB_ILLEGAL:    CB_ILLEGAL4res  opcbillegal;
   };

   struct CB_COMPOUND4args {
           utf8string      tag;
           uint32_t        minorversion;
           uint32_t        callback_ident;
           nfs_cb_argop4   argarray<>;
   };

   struct CB_COMPOUND4res {


Expires: February 2003                                        [Page 269]


Draft Specification      NFS version 4 Protocol              August 2002


           nfsstat4 status;
           utf8string      tag;
           nfs_cb_resop4   resarray<>;
   };


   /*
    * Program number is in the transient range since the client
    * will assign the exact transient program number and provide
    * that to the server via the SETCLIENTID operation.
    */
   program NFS4_CALLBACK {
           version NFS_CB {
                   void
                           CB_NULL(void) = 0;
                   CB_COMPOUND4res
                           CB_COMPOUND(CB_COMPOUND4args) = 1;
           } = 1;
   } = 0x40000000;



































Expires: February 2003                                        [Page 270]


Draft Specification      NFS version 4 Protocol              August 2002


19.  Bibliography


   [Floyd]
   S. Floyd, V. Jacobson, "The Synchronization of Periodic Routing
   Messages," IEEE/ACM Transactions on Networking, 2(2), pp. 122-136,
   April 1994.


   [Gray]
   C. Gray, D. Cheriton, "Leases: An Efficient Fault-Tolerant Mechanism
   for Distributed File Cache Consistency," Proceedings of the Twelfth
   Symposium on Operating Systems Principles, p. 202-210, December 1989.


   [ISO10646]
   "ISO/IEC 10646-1:1993. International Standard -- Information
   technology -- Universal Multiple-Octet Coded Character Set (UCS) --
   Part 1: Architecture and Basic Multilingual Plane."


   [Juszczak]
   Juszczak, Chet, "Improving the Performance and Correctness of an NFS
   Server," USENIX Conference Proceedings, USENIX Association, Berkeley,
   CA, June 1990, pages 53-63.  Describes reply cache implementation
   that avoids work in the server by handling duplicate requests. More
   important, though listed as a side-effect, the reply cache aids in
   the avoidance of destructive non-idempotent operation re-application
   -- improving correctness.


   [Kazar]
   Kazar, Michael Leon, "Synchronization and Caching Issues in the
   Andrew File System," USENIX Conference Proceedings, USENIX
   Association, Berkeley, CA, Dallas Winter 1988, pages 27-36.  A
   description of the cache consistency scheme in AFS.  Contrasted with
   other distributed file systems.


   [Macklem]
   Macklem, Rick, "Lessons Learned Tuning the 4.3BSD Reno Implementation
   of the NFS Protocol," Winter USENIX Conference Proceedings, USENIX
   Association, Berkeley, CA, January 1991.  Describes performance work
   in tuning the 4.3BSD Reno NFS implementation. Describes performance
   improvement (reduced CPU loading) through elimination of data copies.


   [Mogul]
   Mogul, Jeffrey C., "A Recovery Protocol for Spritely NFS," USENIX
   File System Workshop Proceedings, Ann Arbor, MI, USENIX Association,
   Berkeley, CA, May 1992.  Second paper on Spritely NFS proposes a
   lease-based scheme for recovering state of consistency protocol.


Expires: February 2003                                        [Page 271]


Draft Specification      NFS version 4 Protocol              August 2002


   [Nowicki]
   Nowicki, Bill, "Transport Issues in the Network File System," ACM
   SIGCOMM newsletter Computer Communication Review, April 1989.  A
   brief description of the basis for the dynamic retransmission work.


   [Pawlowski]
   Pawlowski, Brian, Ron Hixon, Mark Stein, Joseph Tumminaro, "Network
   Computing in the UNIX and IBM Mainframe Environment," Uniforum `89
   Conf.  Proc., (1989) Description of an NFS server implementation for
   IBM's MVS operating system.


   [RFC1094]
   Sun Microsystems, Inc., "NFS: Network File System Protocol
   Specification", RFC1094, March 1989.

   http://www.ietf.org/rfc/rfc1094.txt


   [RFC1345]
   Simonsen, K., "Character Mnemonics & Character Sets", RFC1345,
   Rationel Almen Planlaegning, June 1992.

   http://www.ietf.org/rfc/rfc1345.txt


   [RFC1700]
   Reynolds, J., Postel, J., "Assigned Numbers", RFC1700, ISI, October
   1994

   http://www.ietf.org/rfc/rfc1700.txt


   [RFC1813]
   Callaghan, B., Pawlowski, B., Staubach, P., "NFS Version 3 Protocol
   Specification", RFC1813, Sun Microsystems, Inc., June 1995.

   http://www.ietf.org/rfc/rfc1813.txt


   [RFC1831]
   Srinivasan, R., "RPC: Remote Procedure Call Protocol Specification
   Version 2", RFC1831, Sun Microsystems, Inc., August 1995.

   http://www.ietf.org/rfc/rfc1831.txt


   [RFC1832]
   Srinivasan, R., "XDR: External Data Representation Standard",
   RFC1832, Sun Microsystems, Inc., August 1995.



Expires: February 2003                                        [Page 272]


Draft Specification      NFS version 4 Protocol              August 2002


   http://www.ietf.org/rfc/rfc1832.txt


   [RFC1833]
   Srinivasan, R., "Binding Protocols for ONC RPC Version 2", RFC1833,
   Sun Microsystems, Inc., August 1995.

   http://www.ietf.org/rfc/rfc1833.txt


   [RFC1884]
   Hinden, R., Deering, S., "IP Version 6 Addressing Architecture",
   RFC1884, December 1995.

   http://www.ietf.org/rfc/rfc1884.txt


   [RFC1964]
   Linn, J., "The Kerberos Version 5 GSS-API Mechanism", RFC1964,
   OpenVision Technologies, June 1996.

   http://www.ietf.org/rfc/rfc1964.txt


   [RFC2025]
   Adams, C., "The Simple Public-Key GSS-API Mechanism (SPKM)", RFC2025,
   Bell-Northern Research, October 1996.

   http://www.ietf.org/rfc/rfc2026.txt


   [RFC2054]
   Callaghan, B., "WebNFS Client Specification", RFC2054, Sun
   Microsystems, Inc., October 1996

   http://www.ietf.org/rfc/rfc2054.txt


   [RFC2055]
   Callaghan, B., "WebNFS Server Specification", RFC2055, Sun
   Microsystems, Inc., October 1996

   http://www.ietf.org/rfc/rfc2055.txt


   [RFC2119]
   Bradner, S., "Key words for use in RFCs to Indicate Requirement
   Levels", RFC2119, Harvard University, March 1997

   http://www.ietf.org/rfc/rfc2119.txt




Expires: February 2003                                        [Page 273]


Draft Specification      NFS version 4 Protocol              August 2002


   [RFC2152]
   Goldsmith, D., "UTF-7 A Mail-Safe Transformation Format of Unicode",
   RFC2152, Apple Computer, Inc., May 1997

   http://www.ietf.org/rfc/rfc2152.txt


   [RFC2203]
   Eisler, M., Chiu, A., Ling, L., "RPCSEC_GSS Protocol Specification",
   RFC2203, Sun Microsystems, Inc., August 1995.

   http://www.ietf.org/rfc/rfc2203.txt


   [RFC2224]
   Callaghan, B., "NFS URL Scheme", RFC2224, Sun Microsystems, Inc.,
   October 1997

   http://www.ietf.org/rfc/rfc2224.txt


   [RFC2277]
   Alvestrand, H., "IETF Policy on Character Sets and Languages",
   RFC2277, UNINETT, January 1998.

   http://www.ietf.org/rfc/rfc2277.txt


   [RFC2279]
   Yergeau, F., "UTF-8, a transformation format of ISO 10646", RFC2279,
   Alis Technologies, January 1998.

   http://www.ietf.org/rfc/rfc2279.txt


   [RFC2581]
   Allman, M., Paxson, V., Stevens, W., "TCP Congestion Control",
   RFC2581, April 1999.

   http://www.ietf.org/rfc/rfc2581.txt


   [RFC2623]
   Eisler, M., "NFS Version 2 and Version 3 Security Issues and the NFS
   Protocol's Use of RPCSEC_GSS and Kerberos V5", RFC2623, Sun
   Microsystems, June 1999

   http://www.ietf.org/rfc/rfc2623.txt


   [RFC2624]
   Shepler, S., "NFS Version 4 Design Considerations", RFC2624, Sun


Expires: February 2003                                        [Page 274]


Draft Specification      NFS version 4 Protocol              August 2002


   Microsystems, June 1999

   http://www.ietf.org/rfc/rfc2624.txt


   [RFC2743]
   Linn, J., "Generic Security Service Application Program Interface,
   Version 2, Update 1", RFC2743, RSA Laboratories, January 2000.

   http://www.ietf.org/rfc/rfc2743.txt


   [RFC2755]
   Chiu, A., Eisler, M., Callaghan, B., "Security Negotiation for
   WebNFS" , RFC2755, Sun Microsystems, June 2000

   http://www.ietf.org/rfc/rfc2847.txt


   [RFC2847]
   Eisler, M., "LIPKEY - A Low Infrastructure Public Key Mechanism Using
   SPKM", RFC2847, Zambeel, June 2000

   http://www.ietf.org/rfc/rfc2847.txt


   [Sandberg]
   Sandberg, R., D. Goldberg, S. Kleiman, D. Walsh, B.  Lyon, "Design
   and Implementation of the Sun Network Filesystem," USENIX Conference
   Proceedings, USENIX Association, Berkeley, CA, Summer 1985.  The
   basic paper describing the SunOS implementation of the NFS version 2
   protocol, and discusses the goals, protocol specification and trade-
   offs.


   [Srinivasan]
   Srinivasan, V., Jeffrey C. Mogul, "Spritely NFS: Implementation and
   Performance of Cache Consistency Protocols", WRL Research Report
   89/5, Digital Equipment Corporation Western Research Laboratory, 100
   Hamilton Ave., Palo Alto, CA, 94301, May 1989.  This paper analyzes
   the effect of applying a Sprite-like consistency protocol applied to
   standard NFS. The issues of recovery in a stateful environment are
   covered in [Mogul].


   [Unicode1]
   The Unicode Consortium, "The Unicode Standard, Version 3.0",
   Addison-Wesley Developers Press, Reading, MA, 2000. ISBN 0-201-
   61633-5.

   More information available at: http://www.unicode.org/



Expires: February 2003                                        [Page 275]


Draft Specification      NFS version 4 Protocol              August 2002


   [Unicode2]
   "Unsupported Scripts" Unicode, Inc., The Unicode Consortium, P.O. Box
   700519, San Jose, CA 95710-0519 USA, September 1999

   http://www.unicode.org/unicode/standard/unsupported.html


   [XNFS]
   The Open Group, Protocols for Interworking: XNFS, Version 3W, The
   Open Group, 1010 El Camino Real Suite 380, Menlo Park, CA 94025, ISBN
   1-85912-184-5, February 1998.

   HTML version available: http://www.opengroup.org









































Expires: February 2003                                        [Page 276]


Draft Specification      NFS version 4 Protocol              August 2002


20.  Authors


20.1.  Editor's Address

   Spencer Shepler
   Sun Microsystems, Inc.
   7808 Moonflower Drive
   Austin, Texas  78750

   Phone: +1 512-349-9376
   E-mail: spencer.shepler@sun.com

20.2.  Authors' Addresses

   Carl Beame
   Hummingbird Ltd.

   E-mail: beame@bws.com


   Brent Callaghan
   Sun Microsystems, Inc.
   17 Network Circle
   Menlo Park, CA  94025

   Phone: +1 650-786-5067
   E-mail: brent.callaghan@sun.com


   Mike Eisler
   5765 Chase Point Circle
   Colorado Springs, CO  80919

   Phone: +1 719-599-9026
   E-mail: mike@eisler.com


   David Noveck
   Network Appliance
   375 Totten Pond Road
   Waltham, MA  02451

   Phone: +1 781-768-5347
   E-mail: dnoveck@netapp.com


   David Robinson
   Sun Microsystems, Inc.
   5300 Riata Park Court
   Austin, TX  78727



Expires: February 2003                                        [Page 277]


Draft Specification      NFS version 4 Protocol              August 2002


   Phone: +1 650-786-5088
   E-mail: david.robinson@sun.com


   Robert Thurlow
   Sun Microsystems, Inc.
   500 Eldorado Blvd.
   Broomfield, CO  80021

   Phone: +1 650-786-5096
   E-mail: robert.thurlow@sun.com


20.3.  Acknowledgements


   The author thanks and acknowledges:

   Neil Brown for his extensive review and comments of various drafts.
   Andy Adamson, Jim Rees, and Kendrick Smith from the CITI organization
   at the University of Michigan for their implementation efforts and
   feedback on the protocol specification.  Mike Kupfer for his review
   of the file locking and ACL mechanisms.  Alan Yoder for his input to
   ACL mechanisms.  Peter Astrand for his close review of the protocol
   specification.  Ran Atkinson for his constant reminder that user's do
   matter.




























Expires: February 2003                                        [Page 278]


Draft Specification      NFS version 4 Protocol              August 2002


21.  Full Copyright Statement

   "Copyright (C) The Internet Society (2000-2002).  All Rights
   Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."


























Expires: February 2003                                        [Page 279]