Web Authorization Protocol                                   V. Bertocci
Internet-Draft                                                Auth0/Okta
Intended status: Standards Track                             B. Campbell
Expires: 18 March 2023                                     Ping Identity
                                                       14 September 2022


          OAuth 2.0 Step-up Authentication Challenge Protocol
              draft-ietf-oauth-step-up-authn-challenge-03

Abstract

   It is not uncommon for resource servers to require different
   authentication strengths or freshness according to the
   characteristics of a request.  This document introduces a mechanism
   for a resource server to signal to a client that the authentication
   event associated with the access token of the current request doesn't
   meet its authentication requirements and specify how to meet them.
   This document also codifies a mechanism for a client to request that
   an authorization server achieve a specific authentication strength or
   freshness when processing an authorization request.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 18 March 2023.

Copyright Notice

   Copyright (c) 2022 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights



Bertocci & Campbell       Expires 18 March 2023                 [Page 1]


Internet-Draft            OAuth Authn Challenge           September 2022


   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Conventions and Definitions . . . . . . . . . . . . . . .   3
   2.  Protocol Overview . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Authentication Requirements Challenge . . . . . . . . . . . .   5
   4.  Authorization Request . . . . . . . . . . . . . . . . . . . .   7
   5.  Authorization Response  . . . . . . . . . . . . . . . . . . .   7
   6.  Authentication Information Conveyed via Access Token  . . . .   8
     6.1.  JWT Access Tokens . . . . . . . . . . . . . . . . . . . .   8
     6.2.  OAuth 2.0 Token Introspection . . . . . . . . . . . . . .   9
   7.  Authorization Server Metadata . . . . . . . . . . . . . . . .  10
   8.  Deployment Considerations . . . . . . . . . . . . . . . . . .  10
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .  11
   10. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  11
     10.1.  OAuth Extensions Error Registration  . . . . . . . . . .  11
     10.2.  OAuth Token Introspection Response Registration  . . . .  12
   11. Normative References  . . . . . . . . . . . . . . . . . . . .  12
   12. Informative References  . . . . . . . . . . . . . . . . . . .  13
   Appendix A.  Acknowledgements . . . . . . . . . . . . . . . . . .  13
   Appendix B.  Document History . . . . . . . . . . . . . . . . . .  14
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  15

1.  Introduction

   In simple API authorization scenarios, an authorization server will
   statically determine what authentication technique to use to handle a
   given request on the basis of aspects such as the scopes requested,
   the resource, the identity of the client and other characteristics
   known at provisioning time.  Although the approach is viable in many
   situations, it falls short in several important circumstances.
   Consider, for instance, an eCommerce API requiring different
   authentication strengths depending on whether the item being
   purchased exceeds a certain threshold, dynamically estimated by the
   API itself using a logic that is opaque to the authorization server.
   An API might also determine that a more recent user authentication is
   required based on its own risk evaluation of the API request.

   This document extends the error codes collection defined by [RFC6750]
   with a new value, insufficient_user_authentication, which can be used
   by resource servers to signal to the client that the authentication
   event associated with the access token presented with the request
   doesn't meet the authentication requirements of the resource server.



Bertocci & Campbell       Expires 18 March 2023                 [Page 2]


Internet-Draft            OAuth Authn Challenge           September 2022


   This document also introduces acr_values and max_age parameters for
   the WWW-Authenticate response header defined by [RFC6750], which the
   resource server can use to explicitly communicate to the client the
   required authentication strength or recentness.

   The client can use that information to reach back to the
   authorization server with an authorization request specifying the
   authentication requirements indicated by protected resource, by
   including the acr_values or max_age parameter as defined in [OIDC].

   Those extensions will make it possible to implement interoperable
   step up authentication with minimal work from resource servers,
   clients and authorization servers.

1.1.  Conventions and Definitions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

2.  Protocol Overview

   Following is an end-to-end sequence of a typical step-up
   authentication scenario implemented according to this specification.
   The scenario assumes that, before the sequence described below takes
   place, the client already obtained an access token for the protected
   resource.






















Bertocci & Campbell       Expires 18 March 2023                 [Page 3]


Internet-Draft            OAuth Authn Challenge           September 2022


    +----------+                                +--------------+
    |          |                                |              |
    |          |-----(1) resource request------>|              |
    |          |                                |              |
    |          |<-------(2) challenge ----------|   Resource   |
    |          |                                |    Server    |
    |          |                                |              |
    |          |-----(5) resource request ----->|              |
    |          |                                |              |
    |          |<---(6) protected resource -----|              |
    |          |                                +--------------+
    |  Client  |
    |          |
    |          |                                +---------------+
    |          |                                |               |
    |          |---(3) authorization request--->|               |
    |          |                                |               |
    |          |<-------------...-------------->| Authorization |
    |          |                                |     Server    |
    |          |<------ (4) access token -------|               |
    |          |                                |               |
    +----------+                                +---------------+

                      Figure 1: Abstract protocol flow

   1.  The client requests a protected resource, presenting an access
       token.
   2.  The resource server determines that the circumstances in which
       the presented access token was obtained offer insufficient
       authentication strength and/or freshness, hence it denies the
       request and returns a challenge describing (using a combination
       of acr_values and max_age) what authentication requirements must
       be met for the resource server to authorize a request.
   3.  The client directs the user agent to the authorization server
       with an authorization request that includes the acr_values and/or
       max_age indicated by the resource server in the previous step.
   4.  After whatever sequence required by the grant of choice plays
       out, which will include the necessary steps to authenticate the
       user in accordance with the acr_values and/or max_age values of
       the authorization request, the authorization server returns a new
       access token to the client.  The access token contains or
       references information about the authentication event.
   5.  The client repeats the request from step 1, presenting the newly
       obtained access token.
   6.  The resource server finds that the user authentication performed
       during the acquisition of the new access token complies with its
       requirements, and returns the requested protected resource.




Bertocci & Campbell       Expires 18 March 2023                 [Page 4]


Internet-Draft            OAuth Authn Challenge           September 2022


   The validation operations mentioned in step 2 and 6 imply that the
   resource server has a way of evaluating the authentication level by
   which the access token was obtained.  This document will describe how
   the resource server can perform that determination when the access
   token is a JWT Access token [RFC9068] or is validated via
   introspection [RFC7662].  Other methods of determining the
   authentication level by which the access token was obtained are
   possible, per agreement by the authorization server and the protected
   resource, but are beyond the scope of this specification.

   Although the case in which the new access token supersedes old tokens
   by virtue of a higher authentication level is common, in line with
   the intuition the term "step-up authentication" suggests, it is
   important to keep in mind that this might not be necessarily hold
   true in the general case.  For example: a resource server might
   require for a particular request a higher authentication level and a
   shorter validity, resulting in a token suitable for one-off calls but
   leading to frequent prompts, hence a suboptimal user experience, if
   reused for routine operations.  In those scenarios, the client would
   be better served by keeping both the old tokens, associated with a
   lower authentication level, and the new one- selecting the
   appropriate token for each API call.  This isn't a new requirement
   for clients, as incremental consent and least privilege principles
   will require similar heuristics for managing access tokens associated
   to different scopes and permission levels.  This document doesn't
   recommend any specific token caching strategy, as that will be
   dependent on the characteristics of every particular scenario.

3.  Authentication Requirements Challenge

   This specification introduces a new error code value for the error
   parameter of [RFC6750] or authentication schemes, such as
   [I-D.ietf-oauth-dpop], which use the error parameter:

   insufficient_user_authentication  The authentication event associated
      with the access token presented with the request doesn't meet the
      authentication requirements of the protected resource.

   Note: the logic through which the resource server determines that the
   current request doesn't meet the authentication requirements of the
   protected resource, and associated functionality (such as expressing,
   deploying and publishing such requirements) is out of scope for this
   document.

   Furthermore, this specification defines additional WWW-Authenticate
   auth-param values to convey the authentication requirements back to
   the client.




Bertocci & Campbell       Expires 18 March 2023                 [Page 5]


Internet-Draft            OAuth Authn Challenge           September 2022


   acr_values  A space-separated string listing the authentication
      context class reference values, in order of preference, one of
      which the protected resource requires for the authentication event
      associated with the access token.
   max_age  Indicates the allowable elapsed time in seconds since the
      last active authentication event associated with the access token.

   Figure 2 below is an example of a WWW-Authenticate header using the
   insufficient_user_authentication error code value to inform the
   client that the access token presented isn't sufficient to gain
   access to the protected resource, and the acr_values parameter to let
   the client know that the expected authentication level corresponds to
   the authentication context class reference identified by myACR.

   HTTP/1.1 401 Unauthorized
   WWW-Authenticate: Bearer error="insufficient_user_authentication",
     error_description="A different authentication level is required",
     acr_values="myACR"

   Figure 2: Authentication Requirements Challenge indicating acr_values

   The following example in Figure 3 shows a challenge informing the
   client that last active authentication event associated with the
   presented access token is too old and a more recent authentication is
   needed.

   HTTP/1.1 401 Unauthorized
   WWW-Authenticate: Bearer error="insufficient_user_authentication",
     error_description="More recent authentication is required",
     max_age="5"

     Figure 3: Authentication Requirements Challenge indicating max_age

   The auth-params max_age and acr_values MAY both occur in the same
   challenge if the resource server needs to express requirements both
   about recency and authentication levels.  If the resource server
   determines that the request is also lacking the scopes required by
   the requested resource, it MAY include the scope attribute with the
   scope necessary to access the protected resource, as described in
   section 3.1 of [RFC6750].











Bertocci & Campbell       Expires 18 March 2023                 [Page 6]


Internet-Draft            OAuth Authn Challenge           September 2022


4.  Authorization Request

   A client receiving an authorization error from the resource server
   carrying the error code insufficient_user_authentication MAY parse
   the WWW-Authenticate header for acr_values and max_age and use them,
   if present, in a request to the authorization server to obtain a new
   access token complying with the corresponding requirements.  Both
   acr_values and max_age authorization request parameters are OPTIONAL
   parameters defined in Section 3.1.2.1. of [OIDC].  This document does
   not introduce any changes in the authorization server behavior
   defined in [OIDC] for precessing those parameters, hence any
   authorization server implementing OpenID Connect will be able to
   participate in the flow described here with little or no changes.
   See Section Section 5 for more details.

   The example request below, which might occur after receiving the
   challenge in Figure 2, indicates to the authorization server that the
   client would like the authentication to occur according to the
   authentication context class reference identified by myACR.

   GET https://as.example.net/authorize?client_id=s6BhdRkqt3
   &response_type=code&scope=purchase&acr_values=myACR

           Figure 4: Authorization Request indicating acr_values

   Subsequent to the challenge in Figure 3, a client might make the
   following example request that indicates to the authorization server
   that the user authentication event needs to have occurred no more
   than five seconds prior.

   GET https://as.example.net/authorize?client_id=s6BhdRkqt3
   &response_type=code&scope=purchase&max_age=5

             Figure 5: Authorization Request indicating max_age

5.  Authorization Response

   Section 5.5.1.1 of [OIDC] establishes that an authorization server
   receiving a request containing the acr_values parameter MAY attempt
   to authenticate the user in a manner that satisfies the requested
   Authentication Context Class Reference, and include the corresponding
   value in the acr claim in the resulting ID Token.  The same section
   also establishes that in case the desired authentication level cannot
   be met, the authorization server SHOULD include in the acr claim a
   value reflecting the authentication level of the current session (if
   any).  The same section also states that if a request includes thee
   max_age parameter, the authorization server MUST include the
   auth_time claim in the issued ID Token.  An authorization server



Bertocci & Campbell       Expires 18 March 2023                 [Page 7]


Internet-Draft            OAuth Authn Challenge           September 2022


   complying with this specification will react to the presence of the
   acr_values and max_age parameters by including acr and auth_time in
   the access token (see Section 6 for details).  Although [OIDC] leaves
   the authorization server free to decide how to handle the inclusion
   of acr in ID Token when requested via acr_values, when it comes to
   access tokens in this specification it is RECOMMENDED that the
   requested acr value is treated as required for successfully
   fulfilling the request.  That is, the requested acr value is included
   in the access token if the authentication operation successfully met
   its requirements, or that the authorization request fails in all
   other cases, returning unmet_authentication_requirements as defined
   in [OIDCUAR].  The recommended behavior will help prevent clients
   getting stuck in a loop where the authorization server keeps
   returning tokens that the resource server already identified as not
   meeting its requirements hence known to be rejected as well.

6.  Authentication Information Conveyed via Access Token

   To evaluate whether an access token meets the protected resource's
   requirements, the resource servers needs a way of accessing
   information about the authentication event by which that access token
   was obtained.  This specification provides guidance on how to convey
   that information in conjunction with two common access token
   validation methods: the one described in [RFC9068], where the access
   token is encoded in JWT format and verified via a set of validation
   rules, and the one described in [RFC7662], where the token is
   validated and decoded by sending it to an introspection endpoint.
   Authorization servers and resource servers MAY elect to use other
   encoding and validation methods, however those are out of scope for
   this document.

6.1.  JWT Access Tokens

   When access tokens are represented as JSON Web Tokens (JWT)
   [RFC7519], the auth_time and acr claims (per Section 2.2.1 of
   [RFC9068]) are used to convey the time and context of the user
   authentication event that the authentication server performed during
   the course of obtaining the access token.  It is useful to bear in
   mind that the values of those two parameters are established at user
   authentication time and won't change in the event of access token
   renewals.  See the aforementioned Section 2.2.1 of [RFC9068] for
   details.  The following is a conceptual example showing the decoded
   content of such a JWT access token.








Bertocci & Campbell       Expires 18 March 2023                 [Page 8]


Internet-Draft            OAuth Authn Challenge           September 2022


   Header:

   {"typ":"at+JWT","alg":"RS256","kid":"LTacESbw"}

   Claims:

   {
    "iss": "https://as.example.net",
    "sub": "someone@example.net",
    "aud": "https://rs.example.com",
    "exp": 1646343000,
    "iat": 1646340200,
    "jti" : "e1j3V_bKic8-LAEB_lccD0G",
    "client_id": "s6BhdRkqt3",
    "scope": "purchase",
    "auth_time": 1646340198,
    "acr": "myACR"
   }

                                  Figure 6

6.2.  OAuth 2.0 Token Introspection

   OAuth 2.0 Token Introspection [RFC7662] defines a method for a
   protected resource to query an authorization server about the active
   state of an access token as well as to determine metainformation
   about the token.  The following two top-level introspection response
   members are defined to convey information about the user
   authentication event that the authentication server performed during
   the course of obtaining the access token.

   acr  Authentication Context Class Reference.  String specifying an
      Authentication Context Class Reference value that identifies the
      Authentication Context Class that the user authentication
      performed satisfied.
   auth_time  Time when the user authentication occurred.  A JSON
      numeric value representing the number of seconds from
      1970-01-01T00:00:00Z UTC until the time of date/time of the
      authentication event.

   The following example shows an introspection response with
   information about the user authentication event by which the access
   token was obtained.








Bertocci & Campbell       Expires 18 March 2023                 [Page 9]


Internet-Draft            OAuth Authn Challenge           September 2022


   HTTP/1.1 200 OK
   Content-Type: application/json

   {
     "active": true,
     "client_id": "s6BhdRkqt3",
     "scope": "purchase",
     "sub": "someone@example.net",
     "aud": "https://rs.example.com",
     "iss": "https://as.example.net",
     "exp": 1639528912,
     "iat": 1618354090,
     "auth_time": 1646340198,
     "acr": "myACR"
   }

                                  Figure 7

7.  Authorization Server Metadata

   Authorization Servers can advertise their support of this
   specification by including in their metadata document (as defined in
   [RFC8414]) the value acr_values_supported as defined in section 3 of
   [OIDCDISC].  The presence of acr_values_supported in the
   authorization server metadata document signals that the authorization
   server will understand and honor the acr_values and max_age
   parameters in incoming authorization requests.

8.  Deployment Considerations

   This specification facilitates the communication of requirements from
   a resource server to a client, which in turn can enable a smooth
   step-up authentication experience.  However, it's important to
   realize that the user experience achievable in every specific
   deployment is a function of the policies each resource server and
   authorization server pairs establish.  Imposing constraints on those
   policies is out of scope for this specification, hence it is
   perfectly possible for resource servers and authorization servers to
   impose requirements that are impossible for users to comply with, or
   leading to any undesirable user experience outcomes.  The
   authentication prompts presented by the authorization server as a
   result of the requirements propagation method described here might
   require the user to perform some specific actions such as using
   multiple devices, having access to devices complying with specific
   security requirements, and so on.  Those extra requirements,
   concerning more about how to comply with a particular requirement
   rather than indicating the identifier of the requirement itself, are
   out of scope for this specification.



Bertocci & Campbell       Expires 18 March 2023                [Page 10]


Internet-Draft            OAuth Authn Challenge           September 2022


9.  Security Considerations

   This document should, in no circumstance, be used to position OAuth
   as an authentication protocol.  The specification focuses on the
   authentication event of the user with the authorization server by
   which the access token was obtained, so that its characteristics can
   be evaluated by a resource server to determine whether they meet its
   requirements, but relies on a separate authentication layer to take
   care of the mechanics leading to that event.  In line with other
   specifications of the OAuth family, this document assumes the
   existence of a session without going into the details of how it is
   established or maintained, what protocols are used to implement that
   layer (e.g., OpenID Connect), and so forth.  Depending on the
   policies adopted by the resource server, the acr_values parameter
   introduced in {#Challenge} might unintentionally disclose information
   about the authenticated user, the resource itself, the authorization
   server, and any other context-specific data that an attacker might
   use to gain knowledge about their target.  Implementers should use
   care in determining what to disclose in the challenge and in what
   circumstances.  The logic examining the incoming access token to
   determine whether a challenge should be returned can execute either
   before or after the traditional token validation logic, be it based
   on JWT token validation, introspection, or any other method.  The
   resource server is free to choose whatever method fits best for its
   needs, however, it's important to remember that returning a challenge
   without having verified that the caller presented a valid token
   (according to the validation method of choice) might mean disclosing
   information to an actor that didn't prove it had the ability to
   obtain a valid token for the resource server, albeit of insufficient
   level.

10.  IANA Considerations

10.1.  OAuth Extensions Error Registration

   This specification requests registration of the following error value
   in the "OAuth Extensions Error" registry [IANA.OAuth.Params]
   established by [RFC6749].

   *  Name: insufficient_user_authentication
   *  Usage Location: resource access error response
   *  Protocol Extension: OAuth 2.0 Step-up Authentication Challenge
      Protocol
   *  Change controller: IETF
   *  Specification document(s): Section 3 of [[ this specification ]]






Bertocci & Campbell       Expires 18 March 2023                [Page 11]


Internet-Draft            OAuth Authn Challenge           September 2022


10.2.  OAuth Token Introspection Response Registration

   This specification requests registration of the following values in
   the "OAuth Token Introspection Response" registry [IANA.OAuth.Params]
   established by [RFC7662].

   Authentication Context Class Reference:

   *  Name: acr
   *  Description: Authentication Context Class Reference
   *  Change Controller: IESG
   *  Specification Document(s): Section 6.2 of [[ this specification ]]

   Authentication Time:

   *  Name: auth_time
   *  Description: Time when the user authentication occurred
   *  Change Controller: IESG
   *  Specification Document(s): Section 6.2 of [[ this specification ]]

11.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC6749]  Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
              RFC 6749, DOI 10.17487/RFC6749, October 2012,
              <https://www.rfc-editor.org/info/rfc6749>.

   [RFC6750]  Jones, M. and D. Hardt, "The OAuth 2.0 Authorization
              Framework: Bearer Token Usage", RFC 6750,
              DOI 10.17487/RFC6750, October 2012,
              <https://www.rfc-editor.org/info/rfc6750>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8414]  Jones, M., Sakimura, N., and J. Bradley, "OAuth 2.0
              Authorization Server Metadata", RFC 8414,
              DOI 10.17487/RFC8414, June 2018,
              <https://www.rfc-editor.org/info/rfc8414>.

   [RFC9068]  Bertocci, V., "JSON Web Token (JWT) Profile for OAuth 2.0
              Access Tokens", RFC 9068, DOI 10.17487/RFC9068, October
              2021, <https://www.rfc-editor.org/info/rfc9068>.



Bertocci & Campbell       Expires 18 March 2023                [Page 12]


Internet-Draft            OAuth Authn Challenge           September 2022


12.  Informative References

   [I-D.abr-twitter-reply]
              Roach, A., "A reply to a specific tweet", Work in
              Progress, Internet-Draft, draft-abr-twitter-reply-00, 7
              September 2018, <https://www.ietf.org/archive/id/draft-
              abr-twitter-reply-00.txt>.

   [I-D.ietf-oauth-dpop]
              Fett, D., Campbell, B., Bradley, J., Lodderstedt, T.,
              Jones, M., and D. Waite, "OAuth 2.0 Demonstrating Proof-
              of-Possession at the Application Layer (DPoP)", Work in
              Progress, Internet-Draft, draft-ietf-oauth-dpop-11, 10
              August 2022, <https://www.ietf.org/archive/id/draft-ietf-
              oauth-dpop-11.txt>.

   [IANA.OAuth.Params]
              IANA, "OAuth Parameters",
              <https://www.iana.org/assignments/oauth-parameters>.

   [OIDC]     Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and
              C. Mortimore, "OpenID Connect Core 1.0 incorporating
              errata set 1", 8 November 2014,
              <http://openid.net/specs/openid-connect-core-1_0.html>.

   [OIDCDISC] Sakimura, N., Bradley, J., Jones, M., and E. Jay, "OpenID
              Connect Core 1.0 incorporating errata set 1", 8 November
              2014, <https://openid.net/specs/openid-connect-discovery-
              1_0.html>.

   [OIDCUAR]  Lodderstedt, T., "OpenID Connect Core Error Code
              unmet_authentication_requirements", 8 May 2019,
              <https://openid.net/specs/openid-connect-unmet-
              authentication-requirements-1_0.html>.

   [RFC7519]  Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
              (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
              <https://www.rfc-editor.org/info/rfc7519>.

   [RFC7662]  Richer, J., Ed., "OAuth 2.0 Token Introspection",
              RFC 7662, DOI 10.17487/RFC7662, October 2015,
              <https://www.rfc-editor.org/info/rfc7662>.

Appendix A.  Acknowledgements

   I wanted to thank the Academy, the viewers at home, the shampoo
   manufacturers, etc..




Bertocci & Campbell       Expires 18 March 2023                [Page 13]


Internet-Draft            OAuth Authn Challenge           September 2022


   This specification was developed within the OAuth Working Group under
   the chairpersonship of Rifaat Shekh-Yusef and Hannes Tschofenig with
   Paul Wouters, and Roman Danyliw serving as Security Area Directors.
   Additionally, the following individuals contributed ideas, feedback,
   corrections, and wording that helped shape this specification: Ivan
   Kanakarakis, Pieter Kasselman, Aaron Parecki, and Filip Skokan.

   Some early discussion of the motivations and concepts that
   precipitated the initial version of this document occurred at the
   2021 OAuth Security Workshop.  The authors thank the organizers of
   the workshop (Guido Schmitz, Steinar Noem, and Daniel Fett) for
   hosting an event that's conducive to collaboration and community
   input.

Appendix B.  Document History

   [[ To be removed from the final specification ]]

   -03

   *  Clarified that acr_values and max_age can co-occur in the
      challenge when necessary
   *  fleshed out deployment and security considerations
   *  fleshed out IANA considerations
   *  Attempt to clarify that while acr_values can request more than one
      value, only one of them is used and ends up in the token

   -02

   *  Fix typos introduced in -01
   *  Begin to fill out the Acknowledgements

   -01

   *  Added AS Metadata section with pointer to acr_values_supported
   *  Mention that it's not necessarily the case that a new 'stepped-up'
      token always supersedes older tokens
   *  Add examples with max_age

   -00 (Working Group Draft)

   *  Initial WG revision (content unchanged from draft-bertocci-oauth-
      step-up-authn-challenge-01)

   -01 draft-bertocci-oauth-step-up-authn-challenge

   *  Fixed example
   *  Clarified/noted that scope can also be in the WWW-Authenticate/401



Bertocci & Campbell       Expires 18 March 2023                [Page 14]


Internet-Draft            OAuth Authn Challenge           September 2022


   -00 draft-bertocci-oauth-step-up-authn-challenge

   *  Initial Individual Draft (with all the authority thereby bestowed
      [I-D.abr-twitter-reply]).

Authors' Addresses

   Vittorio Bertocci
   Auth0/Okta
   Email: vittorio@auth0.com


   Brian Campbell
   Ping Identity
   Email: bcampbell@pingidentity.com




































Bertocci & Campbell       Expires 18 March 2023                [Page 15]