**Important:** Read CONTRIBUTING.md before submitting feedback or contributing
```




Network Working Group                                          W. Kumari
Internet-Draft                                                    Google
Intended status: Informational                                  C. Doyle
Expires: January 23, 2020                               Juniper Networks
                                                        January 17, 2020


                         Secure Device Install
                        draft-ietf-opsawg-sdi-01

Abstract

   Deploying a new network device often requires that an employee
   physically travel to a datacenter to perform the initial install and
   configuration, even in shared datacenters with "smart-hands" type
   support.  In many cases, this could be avoided if there were a
   standard, secure way to initially provision the devices.

   This document extends existing auto-install / Zero-Touch Provisioning
   mechanisms to make the process more secure.

   [ Ed note: Text inside square brackets ([]) is additional background
   information, answers to frequently asked questions, general musings,
   etc.  They will be removed before publication.  This document is
   being collaborated on in Github at: https://github.com/wkumari/draft-
   wkumari-opsawg-sdi.  The most recent version of the document, open
   issues, etc should all be available here.  The authors (gratefully)
   accept pull requests. ]

   [ Ed note: This document introduces concepts and serves as the basic
   for discussion - because of this, it is conversational, and would
   need to be firmed up before being published ]

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."




Kumari & Doyle          Expires January 23, 2020                [Page 1]


Internet-Draft            Secure Device Install                July 2019


   This Internet-Draft will expire on January 23, 2020.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Requirements notation . . . . . . . . . . . . . . . . . .   4
   2.  Overview / Example Scenario . . . . . . . . . . . . . . . . .   4
   3.  Vendor Role / Requirements  . . . . . . . . . . . . . . . . .   5
     3.1.  Device key generation . . . . . . . . . . . . . . . . . .   5
     3.2.  Certificate Publication Server  . . . . . . . . . . . . .   5
   4.  Operator Role / Responsibilities  . . . . . . . . . . . . . .   6
     4.1.  Administrative  . . . . . . . . . . . . . . . . . . . . .   6
     4.2.  Technical . . . . . . . . . . . . . . . . . . . . . . . .   6
     4.3.  Initial Customer Boot . . . . . . . . . . . . . . . . . .   7
   5.  Additional Considerations . . . . . . . . . . . . . . . . . .  10
     5.1.  Key storage . . . . . . . . . . . . . . . . . . . . . . .  10
     5.2.  Key replacement . . . . . . . . . . . . . . . . . . . . .  10
     5.3.  Device reinstall  . . . . . . . . . . . . . . . . . . . .  10
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  10
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  10
   8.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  11
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  11
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .  11
     9.2.  Informative References  . . . . . . . . . . . . . . . . .  11
   Appendix A.  Changes / Author Notes.  . . . . . . . . . . . . . .  12
   Appendix B.  Demo / proof of concept  . . . . . . . . . . . . . .  13
     B.1.  Step 1: Generating the certificate. . . . . . . . . . . .  13
       B.1.1.  Step 1.1: Generate the private key. . . . . . . . . .  13
       B.1.2.  Step 1.2: Generate the certificate signing request. .  13
       B.1.3.  Step 1.3: Generate the (self signed) certificate
               itself. . . . . . . . . . . . . . . . . . . . . . . .  14
     B.2.  Step 2: Generating the encrypted config.  . . . . . . . .  14
       B.2.1.  Step 2.1: Fetch the certificate.  . . . . . . . . . .  14



Kumari & Doyle          Expires January 23, 2020                [Page 2]


Internet-Draft            Secure Device Install                July 2019


       B.2.2.  Step 2.2: Encrypt the config file.  . . . . . . . . .  14
       B.2.3.  Step 2.3: Copy config to the config server. . . . . .  15
     B.3.  Step 3: Decrypting and using the config.  . . . . . . . .  15
       B.3.1.  Step 3.1: Fetch encrypted config file from config
               server. . . . . . . . . . . . . . . . . . . . . . . .  15
       B.3.2.  Step 3.2: Decrypt and use the config. . . . . . . . .  15
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  16

1.  Introduction

   In a growing, global network, significant amounts of time and money
   are spent simply deploying new devices and "forklift" upgrading
   existing devices.  In many cases, these devices are in shared
   datacenters (for example, Internet Exchange Points (IXP) or "carrier
   neutral datacenters"), which have staff on hand that can be
   contracted to perform tasks including physical installs, device
   reboots, loading initial configurations, etc.  There are also a
   number of (often vendor proprietary) protocols to perform initial
   device installs and configurations - for example, many network
   devices will attempt to use DHCP to get an IP address and
   configuration server, and then fetch and install a configuration when
   they are first powered on.

   Network device configurations contain a significant amount of
   security related and / or proprietary information (for example,
   RADIUS or TACACS+ secrets).  Exposing these to a third party to load
   onto a new device (or using an auto-install techniques which fetch an
   (unencrypted) config file via something like TFTP) is simply not
   acceptable to many operators, and so they have to send employees to
   remote locations to perform the initial configuration work.  As well
   as having a significant monetary cost, it also takes significantly
   longer to install devices and is generally inefficient.

   There are some workarounds to this, such as asking the vendor to pre-
   configure the devices before shipping it; asking the smart-hands to
   install a terminal server; providing a minimal, unsecured
   configuration and using that to bootstrap to a complete
   configuration, etc; but these are often clumsy and have security
   issues - for example, in the terminal server case, the console port
   connection could be easily snooped.

   This document layers security onto existing auto-install solutions to
   provide a secure method to initially configure new devices.  It is
   optimized for simplicity, both for the implementor and the operator;
   it is explicitly not intended to be an "all singing, all dancing"
   fully featured system for managing installed / deployed devices, nor
   is it intended to solve all use-cases - rather it is a simple
   targeted solution to solve a common operational issue.  Solutions



Kumari & Doyle          Expires January 23, 2020                [Page 3]


Internet-Draft            Secure Device Install                July 2019


   such as Secure Zero Touch Provisioning (SZTP)" [RFC8572] are much
   more fully featured, but also more complex to implement and / or are
   not widely deployed yet.

1.1.  Requirements notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

2.  Overview / Example Scenario

   Sirius Cybernetics Corp needs another peering router, and so they
   order another router from Acme Network Widgets, to be drop-shipped to
   the Point of Presence (POP) / datacenter.  Acme begins assembling the
   new device, and tells Sirius what the new device's serial number will
   be (SN:17894321).  When Acme first installs the firmware on the
   device and boots it, the device generates a public-private keypair,
   and Acme publishes it on their keyserver (in a certificate, for ease
   of use).

   While the device is being shipped, Sirius generates the initial
   device configuration, fetches the certificate from Acme keyservers by
   providing the serial number of the new device.  Sirius then encrypts
   the device configuration and puts this encrypted config on a (local)
   TFTP server.

   When the device arrives at the POP, it gets installed in Sirius'
   rack, and cabled as instructed.  The new device powers up and
   discovers that it has not yet been configured.  It enters its
   autoboot state, and begins the DHCP process.  Sirius' DHCP server
   provides it with an IP address and the address of the configuration
   server.  The router uses TFTP to fetch its config file (note that all
   this is existing functionality).  The device attempts to load the
   config file - if the config file is unparsable, (new functionality)
   the device tries to use its private key to decrypt the file, and,
   assuming it validates, installs the new configuration.

   Only the "correct" device will have the required private key and be
   able to decrypt and use the config file (See Security
   Considerations).  An attacker would be able to connect to the network
   and get an IP address.  They would also be able to retrieve
   (encrypted) config files by guessing serial numbers (or perhaps the
   server would allow directory listing), but without the private keys
   an attacker will not be able to decrypt the files.




Kumari & Doyle          Expires January 23, 2020                [Page 4]


Internet-Draft            Secure Device Install                July 2019


   This document uses the serial number of the device as a unique
   identifier for simplicity; some vendors may not want to implement the
   system using the serial number as the identifier for business reasons
   (a competitor or similar could enumerate the serial numbers and
   determine how many devices have been manufactured).  Implementors are
   free to choose some other way of generating identifiers (e.g UUID
   [RFC4122]), but this will likely make it somewhat harder for
   operators to use (the serial number is usually easy to find on a
   device, a more complex system is likely harder to track).

   [ Ed note: This example uses TFTP because that is what many vendors
   use in their auto-install / ZTP feature.  It could easily instead be
   HTTP, FTP, etc. ]

3.  Vendor Role / Requirements

   This section describes the vendors roles and responsibilities and
   provides an overview of what the device needs to do.

3.1.  Device key generation

   During the manufacturing stage, when the device is intially powered
   on, it will generate a public-private keypair.  It will send its
   unique identifier and the public key to the vendor's Certificate
   Publication Server to be published.  The mechanism used to do this is
   left undefined.  Note that some devices may be contrained, and so may
   send the raw public key and unique identifier to the certificate
   publication server, while mode capable devices may generate and send
   self-signed certifcates.

3.2.  Certificate Publication Server

   The certificate publication server contains a database of
   certificates.  If newly manufactured devices upload certificates the
   certificate publication server can simply publish these, if the
   devices provide raw public keys and unique identfiers the certificate
   publication server will need to wrap these in a certificate.  Note
   that the certificat publication server MUST only accept certifcates
   or keys from the vendor's manufacturing facilities.

   The customers (e.g Sirius Cybernetics Corp) query this server with
   the serial number (or other provided unique identifier) of a device,
   and retrieve the associated certificate.  It is expected that
   operators will receive the unique identifier (serial number) of
   devices when they purchase them, and will download and store / cache
   the certificate.  This means that there is not a hard requirement on
   the uptime / reachability of the certificate publication server.




Kumari & Doyle          Expires January 23, 2020                [Page 5]


Internet-Draft            Secure Device Install                July 2019


                         +------------+
        +------+         |Certificate |
        |Device|         |Publication |
        +------+         |   Server   |
                         +------------+
   +----------------+   +--------------+
   |   +---------+  |   |              |
   |   | Initial |  |   |              |
   |   |  boot?  |  |   |              |
   |   +----+----+  |   |              |
   |        |       |   |              |
   | +------v-----+ |   |              |
   | |  Generate  | |   |              |
   | |Self-signed | |   |              |
   | |Certificate | |   |              |
   | +------------+ |   |              |
   |        |       |   |   +-------+  |
   |        +-------|---|-->|Receive|  |
   |                |   |   +---+---+  |
   |                |   |       |      |
   |                |   |   +---v---+  |
   |                |   |   |Publish|  |
   |                |   |   +-------+  |
   |                |   |              |
   +----------------+   +--------------+

   Initial certificate generation and publication.

4.  Operator Role / Responsibilities

4.1.  Administrative

   When purchasing a new device, the accounting department will need to
   get the unique device identifier (likely serial number) of the new
   device and communicate it to the operations group.

4.2.  Technical

   The operator will contact the vendor's publication server, and
   download the certificate (by providing the unique device identifier
   of the device).  The operator SHOULD fetch the certificate using a
   secure transport (e.g HTTPS).  The operator will then encrypt the
   initial configuration to the key in the certifcate, and place it on
   their TFTP server.  See Appendix B for examples.







Kumari & Doyle          Expires January 23, 2020                [Page 6]


Internet-Draft            Secure Device Install                July 2019


                         +------------+
      +--------+         |Certificate |
      |Operator|         |Publication |
      +--------+         |   Server   |
                         +------------+
   +----------------+  +----------------+
   | +-----------+  |  |  +-----------+ |
   | |   Fetch   |  |  |  |           | |
   | |  Device   |<------>|Certificate| |
   | |Certificate|  |  |  |           | |
   | +-----+-----+  |  |  +-----------+ |
   |       |        |  |                |
   | +-----v------+ |  |                |
   | |  Encrypt   | |  |                |
   | |   Device   | |  |                |
   | |   Config   | |  |                |
   | +-----+------+ |  |                |
   |       |        |  |                |
   | +-----v------+ |  |                |
   | |  Publish   | |  |                |
   | |    TFTP    | |  |                |
   | |   Server   | |  |                |
   | +------------+ |  |                |
   |                |  |                |
   +----------------+  +----------------+

   Fetching the certificate, encrypting the configuration, publishing
   the encrypted configuration.

4.3.  Initial Customer Boot

   When the device is first booted by the customer (and on subsequent
   boots), if the device has no valid configuration, it will use
   existing auto-install type functionality - it performs DHCP Discovery
   until it gets a DHCP offer including DHCP option 66 or 150, contact
   the server listed in these DHCP options and download its config file.

   After retrieving the config file, the device will examine the file
   and determine if it seems to be a valid config, and if so, proceeds
   as it normally would.  Note that this is existing functionality (for
   example, Cisco devices fetch the config file named by the Bootfile-
   Name DHCP option (67)).

   If the file appears be "garbage", the device will attempt to decrypt
   the configuration file using its private key.  If it is able to
   decrypt and validate the file it will install the configuration, and
   start using it.  The exact method that the device uses to determine




Kumari & Doyle          Expires January 23, 2020                [Page 7]


Internet-Draft            Secure Device Install                July 2019


   if a config file is "valid" is implementation specific, but a normal
   config file looks significantly different to an encrypted blob.

   Note that the device only needs DHCP and to be able to download the
   config file; after the initial power-on in the factory it never need
   to access the Internet or vendor or certifcate publication server -
   it (and only it) has the private key and so has the ability to
   decrypt the config file.











































Kumari & Doyle          Expires January 23, 2020                [Page 8]


Internet-Draft            Secure Device Install                July 2019


             +--------+                +--------------+
             | Device |                |Config server |
             +--------+                | (e.g  TFTP)  |
                                       +--------------+
   +---------------------------+    +------------------+
   | +-----------+             |    |                  |
   | |           |             |    |                  |
   | |   DHCP    |             |    |                  |
   | |           |             |    |                  |
   | +-----+-----+             |    |                  |
   |       |                   |    |                  |
   | +-----v------+            |    |  +-----------+   |
   | |            |            |    |  | Encrypted |   |
   | |Fetch config|<------------------>|  config   |   |
   | |            |            |    |  |   file    |   |
   | +-----+------+            |    |  +-----------+   |
   |       |                   |    |                  |
   |       X                   |    |                  |
   |      / \                  |    |                  |
   |     /   \ Y    +--------+ |    |                  |
   |    |Sane?|---->|Install,| |    |                  |
   |     \   /      |  Boot  | |    |                  |
   |      \ /       +--------+ |    |                  |
   |       V                   |    |                  |
   |       |N                  |    |                  |
   |       |                   |    |                  |
   | +-----v------+            |    |                  |
   | |Decrypt with|            |    |                  |
   | |private key |            |    |                  |
   | +-----+------+            |    |                  |
   |       |                   |    |                  |
   |       v                   |    |                  |
   |      / \                  |    |                  |
   |     /   \ Y    +--------+ |    |                  |
   |    |Sane?|---->|Install,| |    |                  |
   |     \   /      |  Boot  | |    |                  |
   |      \ /       +--------+ |    |                  |
   |       V                   |    |                  |
   |       |N                  |    |                  |
   |       |                   |    |                  |
   |  +----v---+               |    |                  |
   |  |Give up |               |    |                  |
   |  |go home |               |    |                  |
   |  +--------+               |    |                  |
   |                           |    |                  |
   +---------------------------+    +------------------+

   Device boot, fetch and install config file



Kumari & Doyle          Expires January 23, 2020                [Page 9]


Internet-Draft            Secure Device Install                July 2019


5.  Additional Considerations

5.1.  Key storage

   Ideally, the keypair would be stored in a TPM on something which is
   identified as the "router" - for example, the chassis / backplane.
   This is so that a keypair is bound to what humans think of as the
   "device", and not, for example (redundant) routing engines.  Devices
   which implement IEEE 802.1AR could choose to use the IDevID for this
   purpose.

5.2.  Key replacement

   It is anticipated that some operator may want to replace the (vendor
   provided) keys after installing the device.  There are two options
   when implementing this - a vendor could allow the operator's key to
   completely replace the initial device generated key (which means
   that, if the device is ever sold, the new owner couldn't use this
   technique to install the device), or the device could prefer the
   operators installed key.  This is an implementation decision left to
   the vendor.

5.3.  Device reinstall

   Increasingly, operations is moving towards an automated model of
   device management, whereby portions (or the entire) configuration is
   programmatically generated.  This means that operators may want to
   generate an entire configuration after the device has been initially
   installed and ask the device to load and use this new configuration.
   It is expected (but not defined in this document, as it is vendor
   specific) that vendors will allow the operator to copy a new,
   encrypted config (or part of a config) onto a device and then request
   that the device decrypt and install it (e.g: 'load replace <filename>
   encrypted)).  The operator could also choose to reset the device to
   factory defaults, and allow the device to act as though it were the
   initial boot (see Section 4.3).

6.  IANA Considerations

   This document makes no requests of the IANA.

7.  Security Considerations

   This mechanism is intended to replace either expensive (traveling
   employees) or insecure mechanisms of installing newly deployed
   devices such as: unencrypted config files which can be downloaded by
   connecting to unprotected ports in datacenters, mailing initial
   config files on flash drives, or emailing config files and asking a



Kumari & Doyle          Expires January 23, 2020               [Page 10]


Internet-Draft            Secure Device Install                July 2019


   third-party to copy and paste it over a serial terminal.  It does not
   protect against devices with malicious firmware, nor theft and reuse
   of devices.

   An attacker (e.g a malicious datacenter employee) who has physical
   access to the device before it is connected to the network the
   attacker may be able to extract the device private key (especially if
   it isn't stored in a TPM), pretend to be the device when connecting
   to the network, and download and extract the (encrypted) config file.

   This mechanism does not protect against a malicious vendor - while
   the keypair should be generated on the device, and the private key
   should be securely stored, the mechanism cannot detect or protect
   against a vendor who claims to do this, but instead generates the
   keypair off device and keeps a copy of the private key.  It is
   largely understood in the operator community that a malicious vendor
   or attacker with physical access to the device is largely a "Game
   Over" situation.

   Even when using a secure bootstrapping mechanism, security conscious
   operators may wish to bootstrapping devices with a minimal / less
   sensitive config, and then replace this with a more complete one
   after install.

8.  Acknowledgements

   The authors wish to thank everyone who contributed, including Benoit
   Claise, Sam Ribeiro, Michael Richardson, Sean Turner and Kent Watsen.
   Joe Clarke provided significant comments and review.

9.  References

9.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

9.2.  Informative References







Kumari & Doyle          Expires January 23, 2020               [Page 11]


Internet-Draft            Secure Device Install                July 2019


   [RFC4122]  Leach, P., Mealling, M., and R. Salz, "A Universally
              Unique IDentifier (UUID) URN Namespace", RFC 4122,
              DOI 10.17487/RFC4122, July 2005,
              <https://www.rfc-editor.org/info/rfc4122>.

   [RFC8572]  Watsen, K., Farrer, I., and M. Abrahamsson, "Secure Zero
              Touch Provisioning (SZTP)", RFC 8572,
              DOI 10.17487/RFC8572, April 2019,
              <https://www.rfc-editor.org/info/rfc8572>.

Appendix A.  Changes / Author Notes.

   [RFC Editor: Please remove this section before publication ]

   From individual -04 to WG-01:

   o  Renamed from draft-wkumari-opsawg-sdi-04 -> draft-ietf-opsawg-
      sdi-00

   From -00 to -01

   o  Nothing changed in the template!

   From -01 to -03:

   o  See github commit log (AKA, we forgot to update this!)

   o  Added Colin Doyle.

   From -03 to -04:

   Addressed a number of comments received before / at IETF104 (Prague).
   These include:

   o  Pointer to https://datatracker.ietf.org/doc/draft-ietf-netconf-
      zerotouch -- included reference to (now) RFC8572 (KW)

   o  Suggested that 802.1AR IDevID (or similar) could be used.  Stress
      that this is designed for simplicity (MR)

   o  Added text to explain that any unique device identifier can be
      used, not just serial number - serial number is simple and easy,
      but anything which is unique (and can be communicated to the
      customer) will work (BF).

   o  Lots of clarifications from Joe Clarke.





Kumari & Doyle          Expires January 23, 2020               [Page 12]


Internet-Draft            Secure Device Install                July 2019


   o  Make it clear it should first try use the config, and if it
      doesn't work, then try decrypt and use it.

   o  The CA part was confusing people - the certificate is simply a
      wrapper for the key, and the Subject just an index, and so removed
      that.

   o  Added a bunch of ASCII diagrams

Appendix B.  Demo / proof of concept

   This section contains a rough demo / proof of concept of the system.
   It is only intended for illustration; presumably things like
   algorithms, key lengths, format / containers will provide much fodder
   for discussion.

   It uses OpenSSL from the command line, in production something more
   automated would be used.  In this example, the unique identifier is
   the serial number of the router, SN19842256.

B.1.  Step 1: Generating the certificate.

   This step is performed by the router.  It generates a key, then a
   csr, and then a self signed certificate.

B.1.1.  Step 1.1: Generate the private key.

   $ openssl genrsa -out key.pem 2048
   Generating RSA private key, 2048 bit long modulus
   .................................................
   .................................................
   ..........................+++
   ...................+++
   e is 65537 (0x10001)

B.1.2.  Step 1.2: Generate the certificate signing request.















Kumari & Doyle          Expires January 23, 2020               [Page 13]


Internet-Draft            Secure Device Install                July 2019


   $ openssl req -new -key key.pem -out SN19842256.csr
   Country Name (2 letter code) [AU]:.
   State or Province Name (full name) [Some-State]:.
   Locality Name (eg, city) []:.
   Organization Name (eg, company) [Internet Widgits Pty Ltd]:.
   Organizational Unit Name (eg, section) []:.
   Common Name (e.g. server FQDN or YOUR name) []:SN19842256
   Email Address []:.

   Please enter the following 'extra' attributes
   to be sent with your certificate request
   A challenge password []:
   An optional company name []:.


B.1.3.  Step 1.3: Generate the (self signed) certificate itself.

   $ openssl req -x509 -days 36500 -key key.pem -in SN19842256.csr -out
   SN19842256.crt

   The router then sends the key to the vendor's keyserver for
   publication (not shown).

B.2.  Step 2: Generating the encrypted config.

   The operator now wants to deploy the new router.

   They generate the initial config (using whatever magic tool generates
   router configs!), fetch the router's certificate and encrypt the
   config file to that key.  This is done by the operator.

B.2.1.  Step 2.1: Fetch the certificate.

   $ wget http://keyserv.example.net/certificates/SN19842256.crt

B.2.2.  Step 2.2: Encrypt the config file.

   I'm using S/MIME because it is simple to demonstrate.  This is almost
   definitely not the best way to do this.












Kumari & Doyle          Expires January 23, 2020               [Page 14]


Internet-Draft            Secure Device Install                July 2019


   $ openssl smime -encrypt -aes-256-cbc -in SN19842256.cfg\
     -out SN19842256.enc -outform PEM SN19842256.crt
   $ more SN19842256.enc
   -----BEGIN PKCS7-----
   MIICigYJKoZIhvcNAQcDoIICezCCAncCAQAxggE+MIIBOgIBADAiMBUxEzARBgNV
   BAMMClNOMTk4NDIyNTYCCQDJVuBlaTOb1DANBgkqhkiG9w0BAQEFAASCAQBABvM3
   ...
   LZoq08jqlWhZZWhTKs4XPGHUdmnZRYIP8KXyEtHt
   -----END PKCS7-----

B.2.3.  Step 2.3: Copy config to the config server.

   $ scp SN19842256.enc config.example.com:/tftpboot

B.3.  Step 3: Decrypting and using the config.

   When the router connects to the operator's network it will detect
   that does not have a valid configuration file, and will start the
   "autoboot" process.  This is a well documented process, but the high
   level overview is that it will use DHCP to obtain an IP address and
   config server.  It will then use TFTP to download a configuration
   file, based upon its serial number (this document modifies the
   solution to fetch an encrypted config file (ending in .enc)).  It
   will then then decrypt the config file, and install it.

B.3.1.  Step 3.1: Fetch encrypted config file from config server.

   $ tftp 192.0.2.1 -c get SN19842256.enc

B.3.2.  Step 3.2: Decrypt and use the config.

   $ openssl smime -decrypt -in SN19842256.enc -inform pkcs7\
     -out config.cfg -inkey key.pem

   If an attacker does not have the correct key, they will not be able
   to decrypt the config:

   $ openssl smime -decrypt -in SN19842256.enc -inform pkcs7\
     -out config.cfg -inkey wrongkey.pem
   Error decrypting PKCS#7 structure
   140352450692760:error:06065064:digital envelope
    routines:EVP_DecryptFinal_ex:bad decrypt:evp_enc.c:592:
   $ echo $?
   4







Kumari & Doyle          Expires January 23, 2020               [Page 15]


Internet-Draft            Secure Device Install                July 2019


Authors' Addresses

   Warren Kumari
   Google
   1600 Amphitheatre Parkway
   Mountain View, CA  94043
   US

   Email: warren@kumari.net


   Colin Doyle
   Juniper Networks
   1133 Innovation Way
   Sunnyvale, CA  94089
   US

   Email: cdoyle@juniper.net

































Kumari & Doyle          Expires January 23, 2020               [Page 16]

```