OSPF WG S. Venkata
Internet-Draft Google Inc.
Intended status: Standards Track S. Harwani
Expires: August 29, 2009 C. Pignataro
Cisco Systems
D. McPherson
Arbor Networks, Inc.
February 25, 2009
Dynamic Hostname Exchange Mechanism for OSPF
draft-ietf-ospf-dynamic-hostname-02
Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with the
provisions of BCP 78 and BCP 79. This document may contain material
from IETF Documents or IETF Contributions published or made publicly
available before November 10, 2008. The person(s) controlling the
copyright in some of this material may not have granted the IETF
Trust the right to allow modifications of such material outside the
IETF Standards Process. Without obtaining an adequate license from
the person(s) controlling the copyright in such materials, this
document may not be modified outside the IETF Standards Process, and
derivative works of it may not be created outside the IETF Standards
Process, except to format it for publication as an RFC or to
translate it into languages other than English.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on August 29, 2009.
Copyright Notice
Venkata, et al. Expires August 29, 2009 [Page 1]
Internet-Draft Dynamic Hostnames for OSPF February 2009
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents in effect on the date of
publication of this document (http://trustee.ietf.org/license-info).
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document.
Abstract
Currently, there does not exist a simple and dynamic mechanism for
routers running OSPF to learn about symbolic hostnames just like for
routers running IS-IS. This document defines a new OSPF Router
Information (RI) TLV which allows the OSPF routers to flood their
hostname-to-Router ID mapping information across the OSPF network.
This mechanism is applicable to both OSPFv2 and OSPFv3.
Venkata, et al. Expires August 29, 2009 [Page 2]
Internet-Draft Dynamic Hostnames for OSPF February 2009
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1. Specification of Requirements . . . . . . . . . . . . . . . 4
2. Possible solutions . . . . . . . . . . . . . . . . . . . . . . 4
3. Implementation . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1. Dynamic Hostname TLV . . . . . . . . . . . . . . . . . . . 5
3.1.1. Flooding Scope . . . . . . . . . . . . . . . . . . . . 6
4. IPv6 Considerations . . . . . . . . . . . . . . . . . . . . . . 7
5. Security Considerations . . . . . . . . . . . . . . . . . . . . 7
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 7
7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . 8
8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8.1. Normative References . . . . . . . . . . . . . . . . . . . 8
8.2. Informative References . . . . . . . . . . . . . . . . . . 8
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 9
Venkata, et al. Expires August 29, 2009 [Page 3]
Internet-Draft Dynamic Hostnames for OSPF February 2009
1. Introduction
OSPF uses a 32-bit Router ID to uniquely represent and identify a
node in the network. For management and operational reasons, network
operators need to check the status of OSPF adjacencies, entries in
the routing table and the content of the OSPF link state database.
It is obvious that, when looking at diagnostic information, numerical
representations of Router IDs (e.g., dotted-decimal or hexadecimal
representations) are less clear to humans than symbolic names.
One way to overcome this problem is to define a hostname-to-Router ID
mapping table on a router. This mapping can be used bidirectionally
(e.g., to find symbolic names for Router IDs, and to find Router IDs
for symbolic names) or unidirectionally (e.g., to find symbolic
hostnames for Router IDs). Thus every router has to maintain a table
with mappings between router names and Router IDs.
These tables need to contain all names and Router IDs of all routers
in the network. If these mapping tables are built by static
definitions, it can become a manual and tedious process in
operational networks currently; modifying these static mapping
entries when additions, deletions or changes occur becomes a non-
scalable process very prone to error.
This document analyzes possible solutions to this problem (see
Section 2) and provides a way to populate tables by defining a new
OSPF Router Information TLV for OSPF, the Dynamic Hostname TLV (see
Section 3). This mechanism is applicable to both OSPFv2 and OSPFv3.
1.1. Specification of Requirements
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
2. Possible solutions
There are various approaches to providing a name-to-Router ID mapping
service.
One way to build this table of mappings is by static definitions.
The problem with static definitions is that the network administrator
needs to keep updating the mapping entries manually as the network
changes; this approach does not scale as the network grows, since
there needs to be an entry in the mapping table for each and every
router in the network, on every router in the network. Thus, this
approach greatly suffers from maintainability and scalability
Venkata, et al. Expires August 29, 2009 [Page 4]
Internet-Draft Dynamic Hostnames for OSPF February 2009
considerations.
Another approach is having a centralized location where the name-to-
Router ID mapping can be kept. DNS can be used for the same. A
disadvantage with this centralized solution is that its a single
point of failure; and although enhanced availability of the central
mapping service can be designed, it may not be able to resolve the
hostname in the event of reachability or network problems. Also, the
response time can be an issue with the centralized solution, which
can be particularly problematic in times of problem resolution. If
DNS is used as the centralized mapping table, a network operator may
desire a different name mapping than the existing in the DNS, or new
routers may not yet be in DNS.
Additionally for OSPFv3, in native IPv6 deployments, the 32-bit
Router ID value will not map to IPv4-addressed entities in the
network, nor will it be DNS resolvable (see Section 4).
The third solution that we have defined in this document is to make
use of the protocol itself to carry the name-to-Router ID mapping in
a TLV. Routers that understand this TLV can use it to create the
symbolic name-to-Router ID mapping and Routers who don't understand
can simply ignore it. This specification provides these semantics
and mapping mechanisms for OSPFv2 and OSPFv3, leveraging the OSPF
Router Information (RI) LSA ([RFC4970]).
3. Implementation
This extension makes use of the Router Information (RI) Opaque LSA
defined in [RFC4970] for both OSPFv2 and OSPFv3, by defining a new
OSPF Router Information (RI) TLV: The Dynamic Hostname TLV.
The Dynamic Hostname TLV (see Section 3.1) is OPTIONAL. Upon receipt
of the TLV a router may decide to ignore this TLV, or to install the
symbolic name and Router ID in its hostname mapping table.
3.1. Dynamic Hostname TLV
The format of Dynamic Hostname TLV is as follows:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Hostname ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Venkata, et al. Expires August 29, 2009 [Page 5]
Internet-Draft Dynamic Hostnames for OSPF February 2009
Type Dynamic Hostname TLV Type (TBD, see Section 6)
Length Total length of the hostname (value field) in octets, not
including the optional padding.
Value Hostname, a string of 1 to 255 octets, padded to 4-octet
alignment, encoded in the US-ASCII charset.
Routers that do not recognize the Dynamic Hostname TLV Type, ignore
the TLV (see [RFC4970]).
The value field identifies the symbolic hostname of the router
originating the LSA. The string is not null-terminated. The Router
ID of this router is derived from the LSA header, in the Advertising
Router field of the Router Information (RI) Opaque LSA.
The Value field is encoded in 7-bit ASCII. If a user-interface for
configuring or displaying this field permits Unicode characters, that
user-interface is responsible for applying the ToASCII and/or
ToUnicode algorithm as described in [RFC3490] to achieve the correct
format for transmission or display.
The Dynamic Hostname TLV is applicable to both OSPFv2 and OSPFv3.
3.1.1. Flooding Scope
The Dynamic Hostname TLV MAY be advertised within an area-local or AS
scope Router Information (RI) LSA. But the Dynamic Hostname TLV
SHOULD NOT be advertised into an area in more than one RI LSA
irrespective of the scope of the LSA.
In other words, if a router originates a Dynamic Hostname TLV with an
IGP domain (AS) flooding scope, it SHOULD NOT send area-scoped
Dynamic Hostname TLV except into any attached Not-So-Stubby Area
(NSSA) area(s). Similarly, if a router originates area-scoped
Dynamic Hostname TLV (other than NSSA area scoped), it SHOULD NOT
send AS-scoped Dynamic Hostname TLV. When the Dynamic Hostname TLV
is advertised in more than one LSA (e.g., multiple area-scoped LSAs,
or AS-scoped LSAs plus NSSA area-scope LSA(s)), the hostname SHOULD
be the same.
If a router is advertising any AS scope LSA (other than Dynamic TLV
RI LSA) such router SHOULD advertise Dynamic TLV RI LSA in AS scope.
Otherwise, it SHOULD advertise Dynamic TLV RI LSA in area scope. For
example, an AS boundary router (ASBR) SHOULD send an AS scope Dynamic
Hostname TLV, whereas area boundary router (ABRs) and internal
routers SHOULD send an area scope Dynamic Hostname TLV.
Venkata, et al. Expires August 29, 2009 [Page 6]
Internet-Draft Dynamic Hostnames for OSPF February 2009
The flooding scope is controlled by the Opaque LSA type in OSPFv2 and
by the S1 and S2 bits in OSPFv3. For area scope, the Dynamic
Hostname TLV MUST be carried within an OSPFv2 Type 10 RI LSA or an
OSPFv3 RI LSA with the S1 bit set and S2 bit clear. If the flooding
scope is the entire routing domain (AS scope), the Dynamic Hostname
TLV MUST be carried within an OSPFv2 Type 11 RI LSA or OSPFv3 RI LSA
with the S1 bit clear and the S2 bit set.
4. IPv6 Considerations
Both OSPFv2 and OSPFv3 employ Router IDs with a common size of 32-
bits. In IPv4 the Router ID values were typically derived
automatically from an IPv4 address configured on a loopback or
physical interface defined on the local system, or explicitly defined
within the OSPF process configuration. With broader deployment of
IPv6, it's quite likely that OSPF networks will exist that have no
native IPv4 addressed interfaces. As a result, a 32-bit OSPF Router
ID will either need to be explicitly specified, or derived in some
automatic manner that avoids collisions with other OSPF routers
within the local routing domain.
Because this 32-bit value will not map to IPv4-addressed entities in
the network, nor will it be DNS resolvable, it is considered
extremely desirable from an operational perspective that some
mechanism exist to map OSPF Router IDs to more easily interpreted
values, ideally, human-readable strings. This specification enables
a mapping functionality which eases operational burdens that may
otherwise be introduced with native deployment of IPv6.
5. Security Considerations
Since the hostname-to-Router ID mapping relies on information
provided by the routers themselves, a misconfigured or compromised
router can inject false mapping information. Thus, this information
needs to be treated with suspicion when, for example, doing
diagnostics about a suspected security incident.
This document raises no other new security issues for OSPF. Security
considerations for the base OSPF protocol are covered in [RFC2328]
and [RFC5340]. The use of authentication for the OSPF routing
protocols is encouraged.
6. IANA Considerations
IANA maintains the "OSPF Router Information (RI) TLVs" registry
Venkata, et al. Expires August 29, 2009 [Page 7]
Internet-Draft Dynamic Hostnames for OSPF February 2009
reachable at [IANA-RI]. An additional OSPF Router Information TLV
Type is defined in Section 3. It is required to be assigned by IANA
from the Standards Action allocation range [RFC4970].
Registry Name: OSPF Router Information (RI) TLVs
Type Value Capabilities Reference
----------- -------------------------------------- ---------
TBD OSPF Dynamic Hostname This document
7. Acknowledgments
The authors of this document do not make any claims on the
originality of the ideas described. This document adapts format and
text from similar work done in IS-IS [RFC2763]; we would like to
thank Naiming Shen and and Henk Smit, authors of that document.
The authors would also like to thank Acee Lindem, Abhay Roy, and
Anton Smirnov for their valuable comments and suggestions.
8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC4970] Lindem, A., Shen, N., Vasseur, JP., Aggarwal, R., and S.
Shaffer, "Extensions to OSPF for Advertising Optional
Router Capabilities", RFC 4970, July 2007.
8.2. Informative References
[IANA-RI] Internet Assigned Numbers Authority, "OSPFv2 Parameters",
July 2008,
<http://www.iana.org/assignments/ospfv2-parameters>.
[RFC2328] Moy, J., "OSPF Version 2", STD 54, RFC 2328, April 1998.
[RFC2763] Shen, N. and H. Smit, "Dynamic Hostname Exchange Mechanism
for IS-IS", RFC 2763, February 2000.
[RFC3490] Faltstrom, P., Hoffman, P., and A. Costello,
"Internationalizing Domain Names in Applications (IDNA)",
RFC 3490, March 2003.
Venkata, et al. Expires August 29, 2009 [Page 8]
Internet-Draft Dynamic Hostnames for OSPF February 2009
[RFC5340] Coltun, R., Ferguson, D., Moy, J., and A. Lindem, "OSPF
for IPv6", RFC 5340, July 2008.
Authors' Addresses
Subbaiah Venkata
Google Inc.
Email: svenkata@google.com
URI: http://www.google.com
Sanjay Harwani
Cisco Systems
Email: sharwani@cisco.com
URI: http://www.cisco.com
Carlos Pignataro
Cisco Systems
Email: cpignata@cisco.com
URI: http://www.cisco.com
Danny McPherson
Arbor Networks, Inc.
Email: danny@arbor.net
Venkata, et al. Expires August 29, 2009 [Page 9]
