Network Working Group Dan Joyal
Internet Draft Nortel Networks
Vishwas Manral
SiNett Corp
Document: draft-ietf-ospf-ospfv3-mib-09.txt May 2005
Expires: November 2005
Management Information Base for OSPFv3
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as
Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other documents
at any time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html
Copyright Notice
Copyright (C) The Internet Society (2005). All rights reserved.
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in IPv6-based internets.
In particular, it defines objects for managing the Open Shortest Path
First Routing Protocol for IPv6.
Please send comments to ospf@peach.ease.lsoft.com.
Table of Contents
1. The Internet-Standard Management Framework.....................2
2. Overview.......................................................2
2.1 IPv6 Interfaces..............................................3
Internet Draft Expires November 2005 [Page 1]
OSPFv3 MIB May 2005
2.2 Addressing Semantics.........................................4
2.3 Authentication...............................................4
2.4 Type of Service..............................................4
2.5 Flooding Scope...............................................4
2.6 Virtual Links................................................4
2.7 Neighbors....................................................5
3. Structure of the OSPFv3 MIB....................................5
3.1 General Variables............................................5
3.2 Area Table...................................................5
3.3 Area-Scope, Link-Scope and AS-Scope Link State Database......5
3.4 Host Table...................................................5
3.5 Interface Table..............................................5
3.6 Virtual Interface Table......................................6
3.7 Neighbor, Configured Neighbor and Virtual Neighbor
Tables.......................................................6
3.8 Aggregate Range Table........................................6
4. Definitions....................................................6
5. IANA Considerations...........................................59
6. Acknowledgements..............................................59
7. Normative References..........................................59
8. Informative References........................................60
9. Security Considerations.......................................60
10.Contributors' Addresses.......................................61
11.Authors' Addresses............................................62
12.Differences from RFC 1850.....................................62
13.Full Copyright Statement......................................66
14.Intellectual Property.........................................67
1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580]
2. Overview
This memo defines a portion of the Management Information Base (MIB)
for managing the Open Shortest Path First Routing Protocol for IPv6
[RFC2740], otherwise known as OSPF version 3 (OSPFv3). Though the
fundamental mechanisms of OSPF version 2 (OSPFv2) [RFC2328] remain
unchanged in OSPFv3, some changes were necessary due to differences
in IP address size and in protocol semantics between IPv4 and IPv6.
In many cases, where the protocol operations have not changed from
Internet Draft Expires November 2005 [Page 2]
OSPFv3 MIB May 2005
OSPFv2, the specification for OSPFv3 does not restate the details,
but instead refers to the relevant sections in the OSPFv2
specification. This MIB follows along the same lines and includes
Reference clauses referring to the OSPFv2 specification when
applicable.
An attempt was made to align the OSPFv3 MIB as closely as possible
with the OSPFv2 MIB. The following subsections highlight the major
differences between the OSPFv2 MIB [RFC1850] and the OSPFv3 MIB. A
detailed list of differences can be found in Appendix A.
2.1. IPv6 Interfaces
IPv6 interfaces attach to links [RFC2460]. A link is roughly defined
as the layer below IPv6 (e.g. Ethernet, IPv4 Tunnel). One or more
IPv6 prefixes can be associated with an IPv6 interface. IPv6
interfaces and the prefixes associated with those interfaces can be
configured via the IPV6-MIB [RFC2465]. IPv6 interfaces are configured
in the IPv6 Interface Table and IPv6 prefixes are configured in the
IPv6 Address Prefix Table. An IPv6 interface is identified by a
unique index value. IPv6 Address Prefix Table entries associated with
an IPv6 interface reference the interface's index.
Whereas an interface identifier in OSPFv2 is a local IPv4 address or
MIB-2 interface index, an OSPFv3 interface identifier is an IPv6
interface index. For example, the index value of an OSPFv3 Interface
Table entry is the IPv6 interface index of the IPv6 interface over
which OSPFv3 is configured to operate.
2.2. Addressing Semantics
Router ID, Area ID and Link State ID remain at the OSPFv2 size of 32
bits. To ensure uniqueness, a router running both IPv4 and IPv6
concurrently can continue to use a local IPv4 host address,
represented as an unsigned 32-bit value, as the OSPFv3 Router ID.
Otherwise, the Router ID must be selected using another method (e.g.
administratively assigned).
Router ID, Area ID and Link State ID do not have addressing semantics
in OSPFv3, so their syntax is changed to Unsigned32. The order of the
Router ID and Link State ID index components in Link State Database
Tables are reversed in OSPFv3 since the lack of addressing semantics
in Link State IDs make them less unique identifiers than the Router
ID. It is more useful to do partial OID lookups extending to the
Router ID rather than the Link State ID.
2.3. Authentication
In OSPFv3, authentication has been removed from the protocol itself.
MIB objects related to authentication are not carried forward from
the OSPFv2 MIB.
2.4. Type of Service
Internet Draft Expires November 2005 [Page 3]
OSPFv3 MIB May 2005
OSPFv2 MIB objects related to Type of Service (ToS) are not carried
forward to the OSPFv3 MIB.
2.5. Flooding Scope
Flooding scope for LSAs has been generalized and is now explicitly
encoded in the LSA's LS type field. The action to take upon receipt
of unknown LSA types is also encoded in the LS type field [RFC2740].
The OSPFv3 MIB defines three Link State Database tables, one each
for Area-scope LSAs, Link-scope LSAs and AS-scope LSAs.
2.6. Virtual Links
Since addressing semantics have been removed from router-LSAs in
OSPFv3, Virtual Links now need to be assigned an interface ID for
advertisement in Hello packets and in router-LSAs. An object has
been added to the Virtual Interface Table entry for this purpose.
2.7. Neighbors
The OSPFv2 Neighbor Table has been split into two tables. The OSPFv3
Neighbor Table is a read-only table and it contains information
learned from Hellos received from neighbors, including Configured
neighbors. The OSPFv3 Configured Neighbor Table contains entries for
manually configured neighbors and neighbors dynamically discovered by
lower-level protocols such as Inverse Neighbor Discovery.
3. Structure of the OSPFv3 MIB
The MIB is composed of the following sections:
General Variables
Area Table
Area-Scope Link State Database
Link-Scope Link State Database
AS-Scope Link State Database
Host Table
Interface Table
Virtual Interface Table
Neighbor Table
Configured Neighbor Table
Virtual Neighbor Table
Aggregate Range Table
3.1. General Variables
The General Variables are global to the OSPFv3 Process.
3.2. Area Table
The Area Data Structure describes the OSPFv3 Areas that the
Internet Draft Expires November 2005 [Page 4]
OSPFv3 MIB May 2005
router participates in.
3.3. Area-Scope, Link-Scope and AS-Scope Link State Database
The Link State Databases are provided primarily to provide
detailed information for network debugging.
3.4. Host Table
The Host Table is provided to view configured Host Route
information.
3.5. Interface Table
The Interface Table describes the various IPv6 links on which
OSPFv3 is configured.
3.6. Virtual Interface Table
The Virtual Interface Table describes virtual OSPFv3 links.
3.7. Neighbor, Configured Neighbor and Virtual Neighbor Tables
The Neighbor Table, the Configured Neighbor Table and the Virtual
Neighbor Table describe the neighbors to the OSPFv3 Process.
3.8. Aggregate Range Table
The Aggregate Range Table describes prefixes, which summarize
routing information for export outside of an Area.
4. Definitions
OSPFV3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
Counter32, Gauge32, Integer32, Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, StorageType, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndex
FROM IF-MIB
InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
Metric, BigMetric, Status,
HelloRange, DesignatedRouterPriority
FROM OSPF-MIB;
ospfv3MIB MODULE-IDENTITY
Internet Draft Expires November 2005 [Page 5]
OSPFv3 MIB May 2005
LAST-UPDATED "200505021200Z"
ORGANIZATION "IETF OSPF Working Group"
CONTACT-INFO
"WG E-Mail: ospf@peach.ease.lsoft.com
WG Chairs: acee@cisco.com
rohit@utstar.com
Dan Joyal
Nortel Networks
600 Technology Park Drive
Billerica, MA 01821, USA
djoyal@nortel.com
Vishwas Manral
SiNett Corporation
2/1, First Floor
Embassy Icon Annex
Infantry Road
Bangalore 560001
vishwas@sinett.com"
DESCRIPTION
"The MIB module to describe OSPF version 3.
Copyright (C) The Internet Society (2005).
This version of this MIB module is part of
RFC XXXX; see the RFC itself for full legal
notices."
REVISION "200505021200Z"
DESCRIPTION -- RFC Editor assigns RFC xxxx
"Initial version, published as RFC xxxx"
::= { mib-2 XXX } -- to be assigned by IANA
-- Texual conventions
Ospfv3UpToRefreshIntervalTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The values one might be able to configure for
variables bounded by the Refresh Interval"
SYNTAX Integer32 (1..1800)
Ospfv3DeadIntRangeTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The range, in seconds, of dead interval value."
SYNTAX Integer32 (1..'FFFF'h)
Ospfv3RouterIdTc ::= TEXTUAL-CONVENTION
Internet Draft Expires November 2005 [Page 6]
OSPFv3 MIB May 2005
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A 32-bit, unsigned integer uniquely identifying the
router in the Autonomous System. To ensure uniqueness,
this may default to the value of one of the router's
IPv4 host addresses if IPv4 is configured on the
router."
SYNTAX Unsigned32 (0..'FFFFFFFF'h)
Ospfv3AreaIdTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An OSPFv3 Area Identifier"
SYNTAX Unsigned32 (0..'FFFFFFFF'h)
Ospfv3IfInstIdTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An OSPFv3 interface instance ID"
SYNTAX Integer32 (0..255)
-- Top-level structure of MIB
ospfv3Objects OBJECT IDENTIFIER ::= { ospfv3MIB 1 }
ospfv3Conformance OBJECT IDENTIFIER ::= { ospfv3MIB 2 }
-- OSPFv3 General Variables
-- These parameters apply globally to the Router's
-- OSPFv3 Process.
ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 }
ospfv3RouterId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
router in the Autonomous System. To ensure
uniqueness, this may default to the value of
one of the router's IPv4 host addresses,
represented as a 32-bit unsigned integer,
if IPv4 is configured on the router."
::= { ospfv3GeneralGroup 1 }
ospfv3AdminStat OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
Internet Draft Expires November 2005 [Page 7]
OSPFv3 MIB May 2005
DESCRIPTION
"The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all
interfaces."
::= { ospfv3GeneralGroup 2 }
ospfv3VersionNumber OBJECT-TYPE
SYNTAX INTEGER { version3 (3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of OSPF for IPv6 is 3."
::= { ospfv3GeneralGroup 3 }
ospfv3AreaBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag to note whether this router is an area
border router."
REFERENCE
"OSPF Version 2, Section 3 Splitting the AS into
Areas"
::= { ospfv3GeneralGroup 4 }
ospfv3ASBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A flag to note whether this router is
configured as an Autonomous System border router."
REFERENCE
"OSPF Version 2, Section 3.3 Classification of
routers"
::= { ospfv3GeneralGroup 5 }
ospfv3AsScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AS-Scope (e.g. AS-External) link state
advertisements in the link state database."
::= { ospfv3GeneralGroup 6 }
ospfv3AsScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
Internet Draft Expires November 2005 [Page 8]
OSPFv3 MIB May 2005
DESCRIPTION
"The 32-bit unsigned sum of the LS checksums of
the AS-scoped link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link state database of two
routers."
::= { ospfv3GeneralGroup 7 }
ospfv3OriginateNewLsas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of new link-state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA."
::= { ospfv3GeneralGroup 8 }
ospfv3RxNewLsas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link state advertisements
received determined to be new instantiations.
This number does not include newer
instantiations of self-originated link state
advertisements."
::= { ospfv3GeneralGroup 9 }
ospfv3ExtLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of External(LS type 0x4005) in the
link state database"
::= { ospfv3GeneralGroup 10 }
ospfv3ExtAreaLsdbLimit OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of non-default
AS-external-LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
Internet Draft Expires November 2005 [Page 9]
OSPFv3 MIB May 2005
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow
state. The router never holds more than
ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. OspfExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded)."
::= { ospfv3GeneralGroup 11 }
ospfv3MulticastExtensions OBJECT-TYPE
SYNTAX BITS {
intraAreaMulticast(0),
interAreaMulticast(1),
interAsMulticast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams based on
the algorithms defined in the Multicast
Extensions to OSPF.
If intraAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area
multicast routing).
If interAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams between OSPFv3
areas (called inter-area multicast routing).
If interAsMulticast set, indicates that the router can
forward IPv6 multicast datagrams between
Autonomous Systems (called inter-AS multicast
routing).
Only certain combinations of bit settings are
allowed, namely:
- All bits cleared (no multicasting)
- intraAreaMulticast only,
- intraAreaMulticast and interAreaMulticast,
- intraAreaMulticast and interAsMulticast
- intraAreaMulticast, interAreaMulticast and
interAsMulticast
By default, all bits are cleared."
::= { ospfv3GeneralGroup 12 }
ospfv3ExitOverflowInterval OBJECT-TYPE
SYNTAX Unsigned32
Internet Draft Expires November 2005 [Page 10]
OSPFv3 MIB May 2005
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds that, after entering
Overflow State, a router will attempt to leave
Overflow State. This allows the router to again
originate non-default, AS-External-LSAs. When
set to 0, the router will not leave Overflow
State until restarted."
::= { ospfv3GeneralGroup 13 }
ospfv3DemandExtensions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for demand routing."
REFERENCE
"OSPF Version 2, Appendix on Demand Routing"
::= { ospfv3GeneralGroup 14 }
ospfv3ReferenceBandwidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS)"
::= { ospfv3GeneralGroup 15 }
ospfv3RestartSupport OBJECT-TYPE
SYNTAX INTEGER { none (1),
plannedOnly (2),
plannedAndUnplanned (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for OSPF Graceful restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts."
::= { ospfv3GeneralGroup 16 }
ospfv3RestartInterval OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured OSPF Graceful restart timeout interval."
::= { ospfv3GeneralGroup 17 }
Internet Draft Expires November 2005 [Page 11]
OSPFv3 MIB May 2005
ospfv3RestartStatus OBJECT-TYPE
SYNTAX INTEGER { notRestarting (1),
plannedRestart (2),
unplannedRestart (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of OSPF Graceful restart capability."
::= { ospfv3GeneralGroup 18 }
ospfv3RestartAge OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF Graceful restart
interval."
::= { ospfv3GeneralGroup 19 }
ospfv3RestartExitRc OBJECT-TYPE
SYNTAX INTEGER { none (1),
inProgress (2),
completed (3),
timedOut (4),
topologyChanged (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at a
Graceful restart.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change."
::= { ospfv3GeneralGroup 20 }
-- The OSPFv3 Area Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
-- Area 0, by definition, is the Backbone Area
ospfv3AreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaEntry
MAX-ACCESS not-accessible
STATUS current
Internet Draft Expires November 2005 [Page 12]
OSPFv3 MIB May 2005
DESCRIPTION
"Information describing the configured
parameters and cumulative statistics of the router's
attached areas."
REFERENCE
"OSPF Version 2, Section 6 The Area Data
Structure"
::= { ospfv3Objects 2 }
ospfv3AreaEntry OBJECT-TYPE
SYNTAX Ospfv3AreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured
parameters and cumulative statistics of one of the
router's attached areas."
INDEX { ospfv3AreaId }
::= { ospfv3AreaTable 1 }
Ospfv3AreaEntry ::= SEQUENCE {
ospfv3AreaId
Ospfv3AreaIdTc,
ospfv3ImportAsExtern
INTEGER,
ospfv3AreaSpfRuns
Counter32,
ospfv3AreaBdrRtrCount
Gauge32,
ospfv3AreaAsBdrRtrCount
Gauge32,
ospfv3AreaScopeLsaCount
Gauge32,
ospfv3AreaScopeLsaCksumSum
Integer32,
ospfv3AreaSummary
INTEGER,
ospfv3AreaStatus
RowStatus,
ospfv3StubMetric
BigMetric,
ospfv3AreaNssaTranslatorRole
INTEGER,
ospfv3AreaNssaTranslatorState
INTEGER,
ospfv3AreaNssaTranslatorStabInt
Unsigned32,
ospfv3AreaNssaTranslatorEvents
Counter32,
ospfv3AreaStubMetricType
INTEGER
}
Internet Draft Expires November 2005 [Page 13]
OSPFv3 MIB May 2005
ospfv3AreaId OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying an area.
Area ID 0 is used for the OSPFv3 backbone."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaEntry 1 }
ospfv3ImportAsExtern OBJECT-TYPE
SYNTAX INTEGER {
importExternal(1), -- normal area
importNoExternal(2), -- stub area
importNssa(3) -- not-so-stubby-area
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as NSSA
LSAs which have Area-scope"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
DEFVAL { importExternal }
::= { ospfv3AreaEntry 2 }
ospfv3AreaSpfRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the intra-area route
table has been calculated using this area's
link state database. This is typically done
using Dijkstra's algorithm."
::= { ospfv3AreaEntry 3 }
ospfv3AreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of area border routers
reachable within this area. This is initially zero,
and is calculated in each SPF Pass."
::= { ospfv3AreaEntry 4 }
ospfv3AreaAsBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
Internet Draft Expires November 2005 [Page 14]
OSPFv3 MIB May 2005
STATUS current
DESCRIPTION
"The total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass."
::= { ospfv3AreaEntry 5 }
ospfv3AreaScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Area-Scope link state
advertisements in this area's link state
database."
::= { ospfv3AreaEntry 6 }
ospfv3AreaScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Area-Scope link state
advertisements' LS checksums contained in this
area's link state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers."
::= { ospfv3AreaEntry 7 }
ospfv3AreaSummary OBJECT-TYPE
SYNTAX INTEGER {
noAreaSummary(1),
sendAreaSummary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The variable ospfv3AreaSummary controls the
import of Inter-Area LSAs into stub areas. It
has no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate Inter-Area LSAs into the
stub area. It will rely entirely on its default
route.
If it is sendAreaSummary, the router will both
summarize and propagate Inter-Area LSAs."
DEFVAL { sendAreaSummary }
::= { ospfv3AreaEntry 8 }
Internet Draft Expires November 2005 [Page 15]
OSPFv3 MIB May 2005
ospfv3AreaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the
entry. The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3AreaEntry 9 }
ospfv3StubMetric OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric value advertised for the default route
into Stub and NSSA areas."
::= { ospfv3AreaEntry 10 }
ospfv3AreaNssaTranslatorRole OBJECT-TYPE
SYNTAX INTEGER { always(1), candidate(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates an NSSA Border router's ability to
perform NSSA translation of NSSA-LSAs into
AS-External-LSAs."
DEFVAL { candidate }
::= { ospfv3AreaEntry 11 }
ospfv3AreaNssaTranslatorState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
elected(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if and how an NSSA Border router is
performing NSSA translation of NSSA-LSAs into
AS-External-LSAÆs. When this object is set to enabled,
the NSSA Border router's ospfv3AreaNssTranslatorRole
has been set to always. When this object is set to
elected, a candidate NSSA Border router is translating
NSSA-LSAÆs into AS-External-LSAÆs. When this object is
set to disabled, a candidate NSSA Border router is NOT
translating NSSA-LSAÆs into AS-External-LSAÆs."
::= { ospfv3AreaEntry 12 }
ospfv3AreaNssaTranslatorStabInt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
Internet Draft Expires November 2005 [Page 16]
OSPFv3 MIB May 2005
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties."
DEFVAL { 40 }
::= { ospfv3AreaEntry 13 }
ospfv3AreaNssaTranslatorEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Translator State changes
that have occurred since the last boot-up."
::= { ospfv3AreaEntry 14 }
ospfv3AreaStubMetricType OBJECT-TYPE
SYNTAX INTEGER {
ospfv3Metric (1), -- OSPF Metric
comparableCost (2), -- external type 1
nonComparable (3) -- external type 2
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the type of metric
advertised as a default route."
DEFVAL { ospfv3Metric }
::= { ospfv3AreaEntry 15 }
-- OSPFv3 AS-Scope Link State Database
-- The Link State Database contains the AS-Scope Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
ospfv3AsLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AsLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's AS-Scope Link State Database."
::= { ospfv3Objects 3 }
ospfv3AsLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3AsLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single AS-Scope Link State Advertisement."
INDEX { ospfv3AsLsdbType,
Internet Draft Expires November 2005 [Page 17]
OSPFv3 MIB May 2005
ospfv3AsLsdbRouterId,
ospfv3AsLsdbLsid }
::= { ospfv3AsLsdbTable 1 }
Ospfv3AsLsdbEntry ::= SEQUENCE {
ospfv3AsLsdbType
Unsigned32,
ospfv3AsLsdbRouterId
Ospfv3RouterIdTc,
ospfv3AsLsdbLsid
Unsigned32,
ospfv3AsLsdbSequence
Integer32,
ospfv3AsLsdbAge
Integer32,
ospfv3AsLsdbChecksum
Integer32,
ospfv3AsLsdbAdvertisement
OCTET STRING,
ospfv3AsLsdbTypeKnown
TruthValue
}
ospfv3AsLsdbType OBJECT-TYPE
SYNTAX Unsigned32(0..'FFFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate
advertisement format. AS-Scope LSAs not recognized
by the router may be stored in the database."
::= { ospfv3AsLsdbEntry 1 }
ospfv3AsLsdbRouterId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3AsLsdbEntry 2 }
ospfv3AsLsdbLsid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
Internet Draft Expires November 2005 [Page 18]
OSPFv3 MIB May 2005
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { ospfv3AsLsdbEntry 3 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
ospfv3AsLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfv3AsLsdbEntry 4 }
ospfv3AsLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3AsLsdbEntry 5 }
ospfv3AsLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
Internet Draft Expires November 2005 [Page 19]
OSPFv3 MIB May 2005
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfv3AsLsdbEntry 6 }
ospfv3AsLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { ospfv3AsLsdbEntry 7 }
ospfv3AsLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LSA type is recognized by
this Router."
::= { ospfv3AsLsdbEntry 8 }
-- OSPFv3 Area-Scope Link State Database
-- The Link State Database contains the Area-Scope Link State
-- Advertisements from throughout the area that the
-- device is attached to.
ospfv3AreaLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's Area-Scope Link State Database."
::= { ospfv3Objects 4 }
ospfv3AreaLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Area-Scope Link State Advertisement."
INDEX { ospfv3AreaLsdbAreaId,
ospfv3AreaLsdbType,
ospfv3AreaLsdbRouterId,
ospfv3AreaLsdbLsid }
::= { ospfv3AreaLsdbTable 1 }
Ospfv3AreaLsdbEntry ::= SEQUENCE {
ospfv3AreaLsdbAreaId
Ospfv3AreaIdTc,
ospfv3AreaLsdbType
Unsigned32,
Internet Draft Expires November 2005 [Page 20]
OSPFv3 MIB May 2005
ospfv3AreaLsdbRouterId
Ospfv3RouterIdTc,
ospfv3AreaLsdbLsid
Unsigned32,
ospfv3AreaLsdbSequence
Integer32,
ospfv3AreaLsdbAge
Integer32,
ospfv3AreaLsdbChecksum
Integer32,
ospfv3AreaLsdbAdvertisement
OCTET STRING,
ospfv3AreaLsdbTypeKnown
TruthValue
}
ospfv3AreaLsdbAreaId OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32-bit identifier of the Area from which the
LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaLsdbEntry 1 }
ospfv3AreaLsdbType OBJECT-TYPE
SYNTAX Unsigned32(0..'FFFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate
advertisement format. Area-Scope LSAs unrecognized
by the router are also stored in this database."
::= { ospfv3AreaLsdbEntry 2 }
ospfv3AreaLsdbRouterId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32-bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3AreaLsdbEntry 3 }
ospfv3AreaLsdbLsid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
Internet Draft Expires November 2005 [Page 21]
OSPFv3 MIB May 2005
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { ospfv3AreaLsdbEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
ospfv3AreaLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfv3AreaLsdbEntry 5 }
ospfv3AreaLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3AreaLsdbEntry 6 }
ospfv3AreaLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
Internet Draft Expires November 2005 [Page 22]
OSPFv3 MIB May 2005
used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfv3AreaLsdbEntry 7 }
ospfv3AreaLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { ospfv3AreaLsdbEntry 8 }
ospfv3AreaLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LSA type is recognized
by this Router."
::= { ospfv3AreaLsdbEntry 9 }
-- OSPFv3 Link-Scope Link State Database
-- The Link State Database contains the Link-Scope Link State
-- Advertisements from the links that the
-- device is attached to.
ospfv3LinkLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's Link-Scope Link State Database."
::= { ospfv3Objects 5 }
ospfv3LinkLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link-Scope Link State Advertisement."
INDEX { ospfv3LinkLsdbIfIndex,
ospfv3LinkLsdbIfInstId,
ospfv3LinkLsdbType,
ospfv3LinkLsdbRouterId,
ospfv3LinkLsdbLsid }
::= { ospfv3LinkLsdbTable 1 }
Ospfv3LinkLsdbEntry ::= SEQUENCE {
Internet Draft Expires November 2005 [Page 23]
OSPFv3 MIB May 2005
ospfv3LinkLsdbIfIndex
InterfaceIndex,
ospfv3LinkLsdbIfInstId
Ospfv3IfInstIdTc,
ospfv3LinkLsdbType
Unsigned32,
ospfv3LinkLsdbRouterId
Ospfv3RouterIdTc,
ospfv3LinkLsdbLsid
Unsigned32,
ospfv3LinkLsdbSequence
Integer32,
ospfv3LinkLsdbAge
Integer32,
ospfv3LinkLsdbChecksum
Integer32,
ospfv3LinkLsdbAdvertisement
OCTET STRING,
ospfv3LinkLsdbTypeKnown
TruthValue
}
ospfv3LinkLsdbIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the link from which the LSA
was received."
::= { ospfv3LinkLsdbEntry 1 }
ospfv3LinkLsdbIfInstId OBJECT-TYPE
SYNTAX Ospfv3IfInstIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the interface instance from
which the LSA was received."
::= { ospfv3LinkLsdbEntry 2 }
ospfv3LinkLsdbType OBJECT-TYPE
SYNTAX Unsigned32(0..'FFFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate
advertisement format. Link-Scope LSAs unrecognized
by the router are also stored in this database."
::= { ospfv3LinkLsdbEntry 3 }
ospfv3LinkLsdbRouterId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
Internet Draft Expires November 2005 [Page 24]
OSPFv3 MIB May 2005
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3LinkLsdbEntry 4 }
ospfv3LinkLsdbLsid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { ospfv3LinkLsdbEntry 5 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
ospfv3LinkLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfv3LinkLsdbEntry 6 }
ospfv3LinkLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
Internet Draft Expires November 2005 [Page 25]
OSPFv3 MIB May 2005
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3LinkLsdbEntry 7 }
ospfv3LinkLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly
referred to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfv3LinkLsdbEntry 8 }
ospfv3LinkLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { ospfv3LinkLsdbEntry 9 }
ospfv3LinkLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LSA type is recognized by this
Router."
::= { ospfv3LinkLsdbEntry 10 }
-- OSPF Host Table
-- The Host/Metric Table indicates what hosts are directly
-- attached to the Router, and what metrics and types of
-- service should be advertised for them.
ospfv3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of Hosts, and their metrics, that the
router will advertise as host routes."
REFERENCE
Internet Draft Expires November 2005 [Page 26]
OSPFv3 MIB May 2005
"OSPF Version 2, Appendix C.6 Host route
parameters"
::= { ospfv3Objects 6 }
ospfv3HostEntry OBJECT-TYPE
SYNTAX Ospfv3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A metric to be advertised when a given host is
reachable."
INDEX { ospfv3HostAddressType,
ospfv3HostAddress }
::= { ospfv3HostTable 1 }
Ospfv3HostEntry ::= SEQUENCE {
ospfv3HostAddressType
InetAddressType,
ospfv3HostAddress
InetAddress,
ospfv3HostMetric
Metric,
ospfv3HostStatus
RowStatus,
ospfv3HostAreaID
Ospfv3AreaIdTc
}
ospfv3HostAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of ospfv3HostAddress. Only IPv6
addresses without zone index are expected."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route
parameters"
::= { ospfv3HostEntry 1 }
ospfv3HostAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Address of the Host. Must be a Global
address."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route
parameters"
::= { ospfv3HostEntry 2 }
Internet Draft Expires November 2005 [Page 27]
OSPFv3 MIB May 2005
ospfv3HostMetric OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Metric to be advertised."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route
parameters"
::= { ospfv3HostEntry 3 }
ospfv3HostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the
entry. The use of RowStatus is covered in
more detail in [6]."
::= { ospfv3HostEntry 4 }
ospfv3HostAreaID OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Area the Host Entry is to be found within.
By default, the area that a subsuming OSPFv3
interface is in, or Area 0"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3HostEntry 5 }
-- OSPFv3 Interface Table
ospfv3IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Interface Table describes the
interfaces from the viewpoint of OSPFv3."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { ospfv3Objects 7 }
ospfv3IfEntry OBJECT-TYPE
SYNTAX Ospfv3IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Interface Entry describes one
Internet Draft Expires November 2005 [Page 28]
OSPFv3 MIB May 2005
interface from the viewpoint of OSPFv3."
INDEX { ospfv3IfIndex,
ospfv3IfInstId }
::= { ospfv3IfTable 1 }
Ospfv3IfEntry ::= SEQUENCE {
ospfv3IfIndex
InterfaceIndex,
ospfv3IfInstId
Ospfv3IfInstIdTc,
ospfv3IfAreaId
Ospfv3AreaIdTc,
ospfv3IfType
INTEGER,
ospfv3IfAdminStat
Status,
ospfv3IfRtrPriority
DesignatedRouterPriority,
ospfv3IfTransitDelay
Ospfv3UpToRefreshIntervalTc,
ospfv3IfRetransInterval
Ospfv3UpToRefreshIntervalTc,
ospfv3IfHelloInterval
HelloRange,
ospfv3IfRtrDeadInterval
Ospfv3DeadIntRangeTc,
ospfv3IfPollInterval
Unsigned32,
ospfv3IfState
INTEGER,
ospfv3IfDesignatedRouter
Ospfv3RouterIdTc,
ospfv3IfBackupDesignatedRouter
Ospfv3RouterIdTc,
ospfv3IfEvents
Counter32,
ospfv3IfStatus
RowStatus,
ospfv3IfMulticastForwarding
INTEGER,
ospfv3IfDemand
TruthValue,
ospfv3IfMetricValue
Metric,
ospfv3IfLinkScopeLsaCount
Gauge32,
ospfv3IfLinkLsaCksumSum
Integer32,
ospfv3IfDemandNbrProbe
TruthValue,
ospfv3IfDemandNbrProbeRetxLimit
Unsigned32,
Internet Draft Expires November 2005 [Page 29]
OSPFv3 MIB May 2005
ospfv3IfDemandNbrProbeInterval
Unsigned32
}
ospfv3IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured."
::= { ospfv3IfEntry 1 }
ospfv3IfInstId OBJECT-TYPE
SYNTAX Ospfv3IfInstIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Enables multiple interface instances of OSPFv3
to be run over a single link. Each protocol
instance would be assigned a separate ID. This ID
has local link significance only."
::= { ospfv3IfEntry 2 }
ospfv3IfAreaId OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0 is used for the OSPFv3 backbone."
DEFVAL { 0 }
::= { ospfv3IfEntry 3 }
ospfv3IfType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
nbma(2),
pointToPoint(3),
pointToMultipoint(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPFv3 interface type."
::= { ospfv3IfEntry 4 }
ospfv3IfAdminStat OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-create
STATUS current
Internet Draft Expires November 2005 [Page 30]
OSPFv3 MIB May 2005
DESCRIPTION
"The OSPFv3 interface's administrative status.
The value formed on the interface, and the
interface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPFv3."
DEFVAL { enabled }
::= { ospfv3IfEntry 5 }
ospfv3IfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not
eligible to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker."
DEFVAL { 1 }
::= { ospfv3IfEntry 6 }
ospfv3IfTransitDelay OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link state update packet over this
interface."
DEFVAL { 1 }
::= { ospfv3IfEntry 7 }
ospfv3IfRetransInterval OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between link state
advertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and link state request packets."
DEFVAL { 5 }
::= { ospfv3IfEntry 8 }
ospfv3IfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
Internet Draft Expires November 2005 [Page 31]
OSPFv3 MIB May 2005
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network."
DEFVAL { 10 }
::= { ospfv3IfEntry 9 }
ospfv3IfRtrDeadInterval OBJECT-TYPE
SYNTAX Ospfv3DeadIntRangeTc
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down on the interface.
This should be some multiple of the Hello interval.
This value must be the same for all routers attached
to a common network."
DEFVAL { 40 }
::= { ospfv3IfEntry 10 }
ospfv3IfPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The larger time interval, in seconds, between
the Hello packets sent to an inactive
non-broadcast multi-access neighbor."
DEFVAL { 120 }
::= { ospfv3IfEntry 11 }
ospfv3IfState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
loopback(2),
waiting(3),
pointToPoint(4),
designatedRouter(5),
backupDesignatedRouter(6),
otherDesignatedRouter(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Interface State."
::= { ospfv3IfEntry 12 }
Internet Draft Expires November 2005 [Page 32]
OSPFv3 MIB May 2005
ospfv3IfDesignatedRouter OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the Designated Router."
::= { ospfv3IfEntry 13 }
ospfv3IfBackupDesignatedRouter OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the Backup Designated
Router."
::= { ospfv3IfEntry 14 }
ospfv3IfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this OSPF interface has
changed its state, or an error has occurred."
::= { ospfv3IfEntry 15 }
ospfv3IfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the
entry. The use of RowStatus is covered in more
detail in [6]."
::= { ospfv3IfEntry 16 }
ospfv3IfMulticastForwarding OBJECT-TYPE
SYNTAX INTEGER {
blocked(1), -- no multicast forwarding
multicast(2), -- using multicast address
unicast(3) -- to each OSPFv3 neighbor
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link
unicasts. Data link multicasting is not
meaningful on point to point and NBMA interfaces,
and setting ospfv3MulticastForwarding to 0
effectively disables all multicast forwarding."
Internet Draft Expires November 2005 [Page 33]
OSPFv3 MIB May 2005
DEFVAL { blocked }
::= { ospfv3IfEntry 17 }
ospfv3IfDemand OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Demand OSPFv3 procedures
(hello suppression to FULL neighbors and
setting the DoNotAge flag on propagated LSAs)
should be performed on this interface."
DEFVAL { false }
::= { ospfv3IfEntry 18 }
ospfv3IfMetricValue OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value of the
reference bandwidth is configured by the
ospfv3ReferenceBandwidth object."
::= { ospfv3IfEntry 19 }
ospfv3IfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link-Scope link state
advertisements in this link's link state
database."
::= { ospfv3IfEntry 20 }
ospfv3IfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Link-Scope link state
advertisements' LS checksums contained in this
link's link state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link state database of two routers."
::= { ospfv3IfEntry 21 }
ospfv3IfDemandNbrProbe OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
Internet Draft Expires November 2005 [Page 34]
OSPFv3 MIB May 2005
STATUS current
DESCRIPTION
"Indicates whether or not neighbor probing is
enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by
default."
DEFVAL { false }
::= { ospfv3IfEntry 22 }
ospfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor
adjacency is brought down."
DEFVAL { 10 }
::= { ospfv3IfEntry 23}
ospfv3IfDemandNbrProbeInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines how often the neighbor will be probed."
DEFVAL { 120 }
::= { ospfv3IfEntry 24 }
-- OSPFv3 Virtual Interface Table
-- The Virtual Interface Table describes the virtual
-- links that the OSPFv3 Process is configured to
-- carry on.
ospfv3VirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3VirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about this router's virtual
interfaces."
REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link
parameters"
::= { ospfv3Objects 8 }
ospfv3VirtIfEntry OBJECT-TYPE
SYNTAX Ospfv3VirtIfEntry
Internet Draft Expires November 2005 [Page 35]
OSPFv3 MIB May 2005
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single Virtual Interface."
INDEX { ospfv3VirtIfAreaId,
ospfv3VirtIfNeighbor }
::= { ospfv3VirtIfTable 1 }
Ospfv3VirtIfEntry ::= SEQUENCE {
ospfv3VirtIfAreaId
Ospfv3AreaIdTc,
ospfv3VirtIfNeighbor
Ospfv3RouterIdTc,
ospfv3VirtIfIndex
InterfaceIndex,
ospfv3VirtIfInstId
Ospfv3IfInstIdTc,
ospfv3VirtIfTransitDelay
Ospfv3UpToRefreshIntervalTc,
ospfv3VirtIfRetransInterval
Ospfv3UpToRefreshIntervalTc,
ospfv3VirtIfHelloInterval
HelloRange,
ospfv3VirtIfRtrDeadInterval
Ospfv3DeadIntRangeTc,
ospfv3VirtIfState
INTEGER,
ospfv3VirtIfEvents
Counter32,
ospfv3VirtIfStatus
RowStatus,
ospfv3VirtIfLinkScopeLsaCount
Gauge32,
ospfv3VirtIfLinkLsaCksumSum
Integer32
}
ospfv3VirtIfAreaId OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Transit Area that the Virtual Link
traverses. By definition, this is not
Area 0"
::= { ospfv3VirtIfEntry 1 }
ospfv3VirtIfNeighbor OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Router ID of the Virtual Neighbor."
Internet Draft Expires November 2005 [Page 36]
OSPFv3 MIB May 2005
::= { ospfv3VirtIfEntry 2 }
ospfv3VirtIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface index assigned to this OSPFv3 virtual
interface. It is advertised in Hello's sent over
the virtal link and in the router's router-LSAs."
::= { ospfv3VirtIfEntry 3 }
ospfv3VirtIfInstId OBJECT-TYPE
SYNTAX Ospfv3IfInstIdTc
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the interface instance ID to be used
for the virtual interface. This ID has local link
significance only."
DEFVAL { 0 }
::= { ospfv3VirtIfEntry 4 }
ospfv3VirtIfTransitDelay OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link state update packet over this
interface."
DEFVAL { 1 }
::= { ospfv3VirtIfEntry 5 }
ospfv3VirtIfRetransInterval OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between link state
advertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and link state request packets. This
value should be well over the expected
round-trip time."
DEFVAL { 5 }
::= { ospfv3VirtIfEntry 6 }
ospfv3VirtIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
Internet Draft Expires November 2005 [Page 37]
OSPFv3 MIB May 2005
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor."
DEFVAL { 10 }
::= { ospfv3VirtIfEntry 7 }
ospfv3VirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX Ospfv3DeadIntRangeTc
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for the virtual
neighbor."
DEFVAL { 60 }
::= { ospfv3VirtIfEntry 8 }
ospfv3VirtIfState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
pointToPoint(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF virtual interface states. The same encoding
as the ospfV3IfTable is used."
::= { ospfv3VirtIfEntry 9 }
ospfv3VirtIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state changes or error events on
this Virtual Link"
::= { ospfv3VirtIfEntry 10 }
ospfv3VirtIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the entry.
Internet Draft Expires November 2005 [Page 38]
OSPFv3 MIB May 2005
The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3VirtIfEntry 11 }
ospfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link-Scope link state
advertisements in this virtual link's link state
database."
::= { ospfv3VirtIfEntry 12 }
ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link state database of two routers."
::= { ospfv3VirtIfEntry 13 }
-- OSPFv3 Neighbor Table
-- The OSPFv3 Neighbor Table describes all neighbors in
-- the locality of the subject router.
ospfv3NbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3NbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { ospfv3Objects 9 }
ospfv3NbrEntry OBJECT-TYPE
SYNTAX Ospfv3NbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single neighbor."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
Internet Draft Expires November 2005 [Page 39]
OSPFv3 MIB May 2005
INDEX { ospfv3NbrIfIndex,
ospfv3NbrIfInstId,
ospfv3NbrRtrId }
::= { ospfv3NbrTable 1 }
Ospfv3NbrEntry ::= SEQUENCE {
ospfv3NbrIfIndex
InterfaceIndex,
ospfv3NbrIfInstId
Ospfv3IfInstIdTc,
ospfv3NbrRtrId
Ospfv3RouterIdTc,
ospfv3NbrAddressType
InetAddressType,
ospfv3NbrAddress
InetAddress,
ospfv3NbrOptions
Integer32,
ospfv3NbrPriority
DesignatedRouterPriority,
ospfv3NbrState
INTEGER,
ospfv3NbrEvents
Counter32,
ospfv3NbrLsRetransQLen
Gauge32,
ospfv3NbrHelloSuppressed
TruthValue,
ospfv3NbrIfId
InterfaceIndex,
ospfv3NbrRestartHelperStatus
INTEGER,
ospfv3NbrRestartHelperAge
Ospfv3UpToRefreshIntervalTc,
ospfv3NbrRestartHelperExitRc
INTEGER
}
ospfv3NbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local link ID of the link over which the
neighbor can be reached."
::= { ospfv3NbrEntry 1 }
ospfv3NbrIfInstId OBJECT-TYPE
SYNTAX Ospfv3IfInstIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface instance over which the neighbor
Internet Draft Expires November 2005 [Page 40]
OSPFv3 MIB May 2005
can be reached. This ID has local link
significance only."
::= { ospfv3NbrEntry 2 }
ospfv3NbrRtrId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the neighboring
router in the Autonomous System."
::= { ospfv3NbrEntry 3 }
ospfv3NbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected."
::= { ospfv3NbrEntry 4 }
ospfv3NbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address of the neighbor associated with
the local link."
::= { ospfv3NbrEntry 5 }
ospfv3NbrOptions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Bit Mask corresponding to the neighbor's
options field."
REFERENCE
"OSPF Version 3, Appendix A.2 the Options field"
::= { ospfv3NbrEntry 6 }
ospfv3NbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become the
designated router on this particular network."
::= { ospfv3NbrEntry 7 }
Internet Draft Expires November 2005 [Page 41]
OSPFv3 MIB May 2005
ospfv3NbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The State of the relationship with this
Neighbor."
REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States"
::= { ospfv3NbrEntry 8 }
ospfv3NbrEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this neighbor relationship
has changed state, or an error has occurred."
::= { ospfv3NbrEntry 9 }
ospfv3NbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current length of the retransmission
queue."
::= { ospfv3NbrEntry 10 }
ospfv3NbrHelloSuppressed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Hellos are being suppressed
to the neighbor"
::= { ospfv3NbrEntry 11 }
ospfv3NbrIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface ID that the neighbor advertises
Internet Draft Expires November 2005 [Page 42]
OSPFv3 MIB May 2005
in its Hello Packets on this link, that is, the
neighbor's local interface index."
::= { ospfv3NbrEntry 12 }
ospfv3NbrRestartHelperStatus OBJECT-TYPE
SYNTAX INTEGER { notHelping (1),
helping (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the router is acting
as a Graceful restart helper for the neighbor."
::= { ospfv3NbrEntry 13 }
ospfv3NbrRestartHelperAge OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF Graceful restart
interval, if the router is acting as a restart
helper for the neighbor."
::= { ospfv3NbrEntry 14 }
ospfv3NbrRestartHelperExitRc OBJECT-TYPE
SYNTAX INTEGER { none (1),
inProgress (2),
completed (3),
timedOut (4),
topologyChanged (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at acting
as a Graceful restart helper for the neighbor.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change."
::= { ospfv3NbrEntry 15 }
-- OSPFv3 Configured Neighbor Table
-- The OSPFv3 Configured Neighbor Table describes all configured
-- neighbors and neighbors dynamically discovered by
-- lower-level protocols such as Inverse Neighbor Discovery.
Internet Draft Expires November 2005 [Page 43]
OSPFv3 MIB May 2005
ospfv3CfgNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3CfgNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of configured non-virtual neighbor
information and neighbors dynamically discovered
by lower-level protocols such as Inverse Neighbor
Discovery."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { ospfv3Objects 10 }
ospfv3CfgNbrEntry OBJECT-TYPE
SYNTAX Ospfv3CfgNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX { ospfv3CfgNbrIfIndex,
ospfv3CfgNbrIfInstId,
ospfv3CfgNbrAddressType,
ospfv3CfgNbrAddress }
::= { ospfv3CfgNbrTable 1 }
Ospfv3CfgNbrEntry ::= SEQUENCE {
ospfv3CfgNbrIfIndex
InterfaceIndex,
ospfv3CfgNbrIfInstId
Ospfv3IfInstIdTc,
ospfv3CfgNbrAddressType
InetAddressType,
ospfv3CfgNbrAddress
InetAddress,
ospfv3CfgNbrPriority
DesignatedRouterPriority,
ospfv3CfgNbrRtrId
Ospfv3RouterIdTc,
ospfv3CfgNbrState
INTEGER,
ospfv3CfgNbrStorageType
StorageType,
ospfv3CfgNbrStatus
RowStatus
}
Internet Draft Expires November 2005 [Page 44]
OSPFv3 MIB May 2005
ospfv3CfgNbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local link ID of the link over which the
neighbor can be reached."
::= { ospfv3CfgNbrEntry 1 }
ospfv3CfgNbrIfInstId OBJECT-TYPE
SYNTAX Ospfv3IfInstIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface instance over which the neighbor
can be reached. This ID has local link
significance only."
::= { ospfv3CfgNbrEntry 2 }
ospfv3CfgNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected."
::= { ospfv3CfgNbrEntry 3 }
ospfv3CfgNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address of the neighbor associated with
the local link."
::= { ospfv3CfgNbrEntry 4 }
ospfv3CfgNbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become the
designated router on this particular network."
DEFVAL { 1 }
::= { ospfv3CfgNbrEntry 5 }
ospfv3CfgNbrRtrId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS read-only
STATUS current
Internet Draft Expires November 2005 [Page 45]
OSPFv3 MIB May 2005
DESCRIPTION
"A 32-bit integer uniquely identifying the neighboring
router in the Autonomous System. A value of 0
is returned until a Hello is received
from the configured neighbor."
::= { ospfv3CfgNbrEntry 6 }
ospfv3CfgNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The State of the relationship with this Neighbor."
REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States"
::= { ospfv3CfgNbrEntry 7 }
ospfv3CfgNbrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
Manually configured entries will have a storage type
of nonVolatile while entries dynamically created as a
result of a lower-level protocol such as Inverse
Neighbor Discovery will have a storage type of
volatile."
DEFVAL { nonVolatile }
::= { ospfv3CfgNbrEntry 8 }
ospfv3CfgNbrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the entry.
The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3CfgNbrEntry 9 }
-- OSPFv3 Virtual Neighbor Table
Internet Draft Expires November 2005 [Page 46]
OSPFv3 MIB May 2005
-- This table describes all virtual neighbors.
-- Since Virtual Links are configured in the
-- virtual interface table, this table is read-only.
ospfv3VirtNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3VirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 15 Virtual Links"
::= { ospfv3Objects 11 }
ospfv3VirtNbrEntry OBJECT-TYPE
SYNTAX Ospfv3VirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual neighbor information."
INDEX { ospfv3VirtNbrArea,
ospfv3VirtNbrRtrId }
::= { ospfv3VirtNbrTable 1 }
Ospfv3VirtNbrEntry ::= SEQUENCE {
ospfv3VirtNbrArea
Ospfv3AreaIdTc,
ospfv3VirtNbrRtrId
Ospfv3RouterIdTc,
ospfv3VirtNbrIfIndex
InterfaceIndex,
ospfv3VirtNbrIfInstId
Ospfv3IfInstIdTc,
ospfv3VirtNbrAddressType
InetAddressType,
ospfv3VirtNbrAddress
InetAddress,
ospfv3VirtNbrOptions
Integer32,
ospfv3VirtNbrState
INTEGER,
ospfv3VirtNbrEvents
Counter32,
ospfv3VirtNbrLsRetransQLen
Gauge32,
ospfv3VirtNbrHelloSuppressed
TruthValue,
ospfv3VirtNbrIfId
InterfaceIndex,
ospfv3VirtNbrRestartHelperStatus
INTEGER,
ospfv3VirtNbrRestartHelperAge
Internet Draft Expires November 2005 [Page 47]
OSPFv3 MIB May 2005
Ospfv3UpToRefreshIntervalTc,
ospfv3VirtNbrRestartHelperExitRc
INTEGER
}
ospfv3VirtNbrArea OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Transit Area Identifier."
::= { ospfv3VirtNbrEntry 1 }
ospfv3VirtNbrRtrId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
neighboring router in the Autonomous System."
::= { ospfv3VirtNbrEntry 2 }
ospfv3VirtNbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local interface ID for the virtual link over
which the neighbor can be reached."
::= { ospfv3VirtNbrEntry 3 }
ospfv3VirtNbrIfInstId OBJECT-TYPE
SYNTAX Ospfv3IfInstIdTc
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface instance for the virtual link over
which the neighbor can be reached."
::= { ospfv3VirtNbrEntry 4 }
ospfv3VirtNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of ospfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected."
::= { ospfv3VirtNbrEntry 5 }
ospfv3VirtNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only
STATUS current
Internet Draft Expires November 2005 [Page 48]
OSPFv3 MIB May 2005
DESCRIPTION
"The IPv6 address advertised by this Virtual Neighbor.
It must be a Global scope address."
::= { ospfv3VirtNbrEntry 6 }
ospfv3VirtNbrOptions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Bit Mask corresponding to the neighbor's options
field."
REFERENCE
"OSPF Version 3, Appendix A.2 the Options field"
::= { ospfv3VirtNbrEntry 7 }
ospfv3VirtNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Virtual Neighbor Relationship."
::= { ospfv3VirtNbrEntry 8 }
ospfv3VirtNbrEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this virtual link has
changed its state, or an error has occurred."
::= { ospfv3VirtNbrEntry 9 }
ospfv3VirtNbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current length of the retransmission
queue."
::= { ospfv3VirtNbrEntry 10 }
ospfv3VirtNbrHelloSuppressed OBJECT-TYPE
SYNTAX TruthValue
Internet Draft Expires November 2005 [Page 49]
OSPFv3 MIB May 2005
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Hellos are being suppressed
to the neighbor"
::= { ospfv3VirtNbrEntry 11 }
ospfv3VirtNbrIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface ID."
::= { ospfv3VirtNbrEntry 12 }
ospfv3VirtNbrRestartHelperStatus OBJECT-TYPE
SYNTAX INTEGER { notHelping (1),
helping (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the router is acting
as a Graceful restart helper for the neighbor."
::= { ospfv3VirtNbrEntry 13 }
ospfv3VirtNbrRestartHelperAge OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF Graceful restart
interval, if the router is acting as a restart
helper for the neighbor."
::= { ospfv3VirtNbrEntry 14 }
ospfv3VirtNbrRestartHelperExitRc OBJECT-TYPE
SYNTAX INTEGER { none (1),
inProgress (2),
completed (3),
timedOut (4),
topologyChanged (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at acting
as a Graceful restart helper for the neighbor.
none:............no restart has yet been attempted.
Internet Draft Expires November 2005 [Page 50]
OSPFv3 MIB May 2005
inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change."
::= { ospfv3VirtNbrEntry 15 }
--
-- The OSPFv3 Area Aggregate Table
--
ospfv3AreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range
subsumes another range the most specific
match is the preferred one."
::= { ospfv3Objects 12 }
ospfv3AreaAggregateEntry OBJECT-TYPE
SYNTAX Ospfv3AreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range
subsumes another range the most specific match is
the preferred one."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
INDEX { ospfv3AreaAggregateAreaID,
ospfv3AreaAggregateAreaLsdbType,
ospfv3AreaAggregatePrefixType,
ospfv3AreaAggregatePrefix,
ospfv3AreaAggregatePrefixLength }
::= { ospfv3AreaAggregateTable 1 }
Ospfv3AreaAggregateEntry ::= SEQUENCE {
ospfv3AreaAggregateAreaID
Ospfv3AreaIdTc,
ospfv3AreaAggregateAreaLsdbType
INTEGER,
ospfv3AreaAggregatePrefixType
InetAddressType,
ospfv3AreaAggregatePrefix
InetAddress,
ospfv3AreaAggregatePrefixLength
Internet Draft Expires November 2005 [Page 51]
OSPFv3 MIB May 2005
InetAddressPrefixLength,
ospfv3AreaAggregateStatus
RowStatus,
ospfv3AreaAggregateEffect
INTEGER,
ospfv3AreaAggregateRouteTag
INTEGER
}
ospfv3AreaAggregateAreaID OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Area the Address Aggregate is to be found
within."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaAggregateEntry 1 }
ospfv3AreaAggregateAreaLsdbType OBJECT-TYPE
SYNTAX INTEGER {
interAreaPrefixLsa(8195), -- 0x2003
nssaExternalLsa(8199) -- 0x2007
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address
Aggregate applies to."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { ospfv3AreaAggregateEntry 2 }
ospfv3AreaAggregatePrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix type of ospfv3AreaAggregatePrefix. Only
IPv6 addresses are expected."
::= { ospfv3AreaAggregateEntry 4 }
ospfv3AreaAggregatePrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Prefix."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
Internet Draft Expires November 2005 [Page 52]
OSPFv3 MIB May 2005
::= { ospfv3AreaAggregateEntry 5 }
ospfv3AreaAggregatePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength (3..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix (in bits). A prefix can
not be shorter than 3 bits."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaAggregateEntry 6 }
ospfv3AreaAggregateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the entry
The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3AreaAggregateEntry 7 }
ospfv3AreaAggregateEffect OBJECT-TYPE
SYNTAX INTEGER {
advertiseMatching(1),
doNotAdvertiseMatching(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Prefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate
(advertiseMatching), or result in the prefix not
being advertised at all outside the area."
DEFVAL { advertiseMatching }
::= { ospfv3AreaAggregateEntry 8 }
ospfv3AreaAggregateRouteTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This tag is advertised only in the summarized
As-External LSA when summarizing from NSSA-LSAÆs to
AS-External-LSAÆs."
DEFVAL { 0 }
::= { ospfv3AreaAggregateEntry 9 }
-- conformance information
Internet Draft Expires November 2005 [Page 53]
OSPFv3 MIB May 2005
ospfv3Groups OBJECT IDENTIFIER ::= { ospfv3Conformance 1 }
ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 }
-- compliance statements
ospfv3Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement"
MODULE -- this module
MANDATORY-GROUPS {
ospfv3BasicGroup,
ospfv3AreaGroup,
ospfv3IfGroup,
ospfv3VirtIfGroup,
ospfv3NbrGroup,
ospfv3CfgNbrGroup,
ospfv3VirtNbrGroup,
ospfv3AreaAggregateGroup
}
GROUP ospfv3AsLsdbGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
display their AS-scope link state database."
GROUP ospfv3AreaLsdbGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
display their Area-scope link state database."
GROUP ospfv3LinkLsdbGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
display their Link-scope link state database."
GROUP ospfv3HostGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
support attached hosts."
OBJECT ospfv3NbrAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
OBJECT ospfv3VirtNbrAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
::= { ospfv3Compliances 1 }
Internet Draft Expires November 2005 [Page 54]
OSPFv3 MIB May 2005
-- units of conformance
ospfv3BasicGroup OBJECT-GROUP
OBJECTS {
ospfv3RouterId,
ospfv3AdminStat,
ospfv3VersionNumber,
ospfv3AreaBdrRtrStatus,
ospfv3ASBdrRtrStatus,
ospfv3AsScopeLsaCount,
ospfv3AsScopeLsaCksumSum,
ospfv3OriginateNewLsas,
ospfv3RxNewLsas,
ospfv3ExtLsaCount,
ospfv3ExtAreaLsdbLimit,
ospfv3MulticastExtensions,
ospfv3ExitOverflowInterval,
ospfv3DemandExtensions,
ospfv3ReferenceBandwidth,
ospfv3RestartSupport,
ospfv3RestartInterval,
ospfv3RestartStatus,
ospfv3RestartAge,
ospfv3RestartExitRc
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems."
::= { ospfv3Groups 1 }
ospfv3AreaGroup OBJECT-GROUP
OBJECTS {
ospfv3ImportAsExtern,
ospfv3AreaSpfRuns,
ospfv3AreaBdrRtrCount,
ospfv3AreaAsBdrRtrCount,
ospfv3AreaScopeLsaCount,
ospfv3AreaScopeLsaCksumSum,
ospfv3AreaSummary,
ospfv3AreaStatus,
ospfv3StubMetric,
ospfv3AreaNssaTranslatorRole,
ospfv3AreaNssaTranslatorState,
ospfv3AreaNssaTranslatorStabInt,
ospfv3AreaNssaTranslatorEvents,
ospfv3AreaStubMetricType
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
supporting areas."
Internet Draft Expires November 2005 [Page 55]
OSPFv3 MIB May 2005
::= { ospfv3Groups 2 }
ospfv3AsLsdbGroup OBJECT-GROUP
OBJECTS {
ospfv3AsLsdbSequence,
ospfv3AsLsdbAge,
ospfv3AsLsdbChecksum,
ospfv3AsLsdbAdvertisement,
ospfv3AsLsdbTypeKnown
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
that display their AS-scope link state database."
::= { ospfv3Groups 3 }
ospfv3AreaLsdbGroup OBJECT-GROUP
OBJECTS {
ospfv3AreaLsdbSequence,
ospfv3AreaLsdbAge,
ospfv3AreaLsdbChecksum,
ospfv3AreaLsdbAdvertisement,
ospfv3AreaLsdbTypeKnown
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
that display their Area-scope link state database."
::= { ospfv3Groups 4 }
ospfv3LinkLsdbGroup OBJECT-GROUP
OBJECTS {
ospfv3LinkLsdbSequence,
ospfv3LinkLsdbAge,
ospfv3LinkLsdbChecksum,
ospfv3LinkLsdbAdvertisement,
ospfv3LinkLsdbTypeKnown
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
that display their Link-scope link state database."
::= { ospfv3Groups 5 }
ospfv3HostGroup OBJECT-GROUP
OBJECTS {
ospfv3HostMetric,
ospfv3HostStatus,
ospfv3HostAreaID
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
Internet Draft Expires November 2005 [Page 56]
OSPFv3 MIB May 2005
that support attached hosts."
::= { ospfv3Groups 6 }
ospfv3IfGroup OBJECT-GROUP
OBJECTS {
ospfv3IfAreaId,
ospfv3IfType,
ospfv3IfAdminStat,
ospfv3IfRtrPriority,
ospfv3IfTransitDelay,
ospfv3IfRetransInterval,
ospfv3IfHelloInterval,
ospfv3IfRtrDeadInterval,
ospfv3IfPollInterval,
ospfv3IfState,
ospfv3IfDesignatedRouter,
ospfv3IfBackupDesignatedRouter,
ospfv3IfEvents,
ospfv3IfStatus,
ospfv3IfMulticastForwarding,
ospfv3IfDemand,
ospfv3IfMetricValue,
ospfv3IfLinkScopeLsaCount,
ospfv3IfLinkLsaCksumSum,
ospfv3IfDemandNbrProbe,
ospfv3IfDemandNbrProbeRetxLimit,
ospfv3IfDemandNbrProbeInterval
}
STATUS current
DESCRIPTION
"These interface objects are required for
OSPFv3 systems."
::= { ospfv3Groups 7 }
ospfv3VirtIfGroup OBJECT-GROUP
OBJECTS {
ospfv3VirtIfIndex,
ospfv3VirtIfInstId,
ospfv3VirtIfTransitDelay,
ospfv3VirtIfRetransInterval,
ospfv3VirtIfHelloInterval,
ospfv3VirtIfRtrDeadInterval,
ospfv3VirtIfState,
ospfv3VirtIfEvents,
ospfv3VirtIfStatus,
ospfv3VirtIfLinkScopeLsaCount,
ospfv3VirtIfLinkLsaCksumSum
}
STATUS current
DESCRIPTION
"These virtual interface objects are required for
OSPFv3 systems."
::= { ospfv3Groups 8 }
Internet Draft Expires November 2005 [Page 57]
OSPFv3 MIB May 2005
ospfv3NbrGroup OBJECT-GROUP
OBJECTS {
ospfv3NbrAddressType,
ospfv3NbrAddress,
ospfv3NbrOptions,
ospfv3NbrPriority,
ospfv3NbrState,
ospfv3NbrEvents,
ospfv3NbrLsRetransQLen,
ospfv3NbrHelloSuppressed,
ospfv3NbrIfId,
ospfv3NbrRestartHelperStatus,
ospfv3NbrRestartHelperAge,
ospfv3NbrRestartHelperExitRc
}
STATUS current
DESCRIPTION
"These neighbor objects are required for
OSPFv3 systems."
::= { ospfv3Groups 9 }
ospfv3CfgNbrGroup OBJECT-GROUP
OBJECTS {
ospfv3CfgNbrPriority,
ospfv3CfgNbrRtrId,
ospfv3CfgNbrState,
ospfv3CfgNbrStorageType,
ospfv3CfgNbrStatus
}
STATUS current
DESCRIPTION
"These Configured neighbor objects are required for
OSPFv3 systems."
::= { ospfv3Groups 10 }
ospfv3VirtNbrGroup OBJECT-GROUP
OBJECTS {
ospfv3VirtNbrIfIndex,
ospfv3VirtNbrIfInstId,
ospfv3VirtNbrAddressType,
ospfv3VirtNbrAddress,
ospfv3VirtNbrOptions,
ospfv3VirtNbrState,
ospfv3VirtNbrEvents,
ospfv3VirtNbrLsRetransQLen,
ospfv3VirtNbrHelloSuppressed,
ospfv3VirtNbrIfId,
ospfv3VirtNbrRestartHelperStatus,
ospfv3VirtNbrRestartHelperAge,
ospfv3VirtNbrRestartHelperExitRc
}
STATUS current
Internet Draft Expires November 2005 [Page 58]
OSPFv3 MIB May 2005
DESCRIPTION
"These virtual neighbor objects are required for
OSPFv3 systems."
::= { ospfv3Groups 11 }
ospfv3AreaAggregateGroup OBJECT-GROUP
OBJECTS {
ospfv3AreaAggregateStatus,
ospfv3AreaAggregateEffect,
ospfv3AreaAggregateRouteTag
}
STATUS current
DESCRIPTION
"These area aggregate objects are required for
OSPFv3 systems."
::= { ospfv3Groups 12 }
END
5. IANA Considerations
The MIB module in this document uses the following IANA-assigned
OBJECT IDENTIFIER values recorded in the SMI Numbers registry:
Descriptor OBJECT IDENTIFIER value
---------- -----------------------
ospfv3MIB { mib-2 XXX }
[Editor's Note (to be removed prior to publication): the IANA is
requested to assign a value for "XXX" under the 'mib-2' subtree and
to record the assignment in the SMI Numbers registry. When the
assignment has been made, the RFC Editor is asked to replace "XXX"
(here and in the MIB module) with the assigned value and to remove
this note.]
6. Acknowledgements
This document is based on the MIB for OSPF version 2 by Rob
Coltun and Fred Baker [RFC1850]. The authors would like to thank
Toshiaki Takada for his insightful comments. Thanks to Ramachandran
Radhakrishnan, Harikrishna Golapalli and Mahesh Kurapati for their
help. Thanks also to Acee Lindem, Keith McCloghrie, Manish Gupta, Nic
Neate and Vanitha N. for their constructive comments.
7. Normative References
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.
Internet Draft Expires November 2005 [Page 59]
OSPFv3 MIB May 2005
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[RFC1850] Baker, F., and Coltun, R., "OSPF Version 2 Management
Information Base", RFC 1850, November 1995.
[RFC2740] Coltun, R., Ferguson, D., Moy, J., "OSPF for IPv6", RFC
2740, December 1999.
[RFC2465] Haskin, D., Onishi, S., "Management Information Base for
IP Version 6: Textual Conventions and General Group", RFC
2465, December 1998.
[RFC2328] Moy, J., "OSPF Version 2", RFC 2328, April 1998.
8. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction and Applicability Statements for
Internet-Standard Management Framework", RFC 3410,
December 2002.
[RFC2460] Deering, S., and R. Hinden, "Internet Protocol, Version 6
(IPv6) Specification", RFC 2460, December 1998.
9. Security Considerations
There are a number of management objects defined in this MIB
that have a MAX-ACCESS clause of read-write and/or read-create.
Such objects may be considered sensitive or vulnerable in some
network environments. The support for SET operations in a
non-secure environment without proper protection can have a
negative effect on network operations.
SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), even then, there is
no control as to who on the secure network is allowed to access and
GET/SET (read/change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC 2574 [12] and the View-based
Access Control Model RFC 2575 [15] is recommended.
Internet Draft Expires November 2005 [Page 60]
OSPFv3 MIB May 2005
It is then the customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET
(change/create/delete) them.
10. Contributors' Addresses
Jacek Kwiatkowski
Intel Technology Poland
ul. Slowackiego 173
80-298 Gdansk, Poland
Email: jacek.kwiatkowski@intel.com
Sebastian Zwolinski
Intel Technology Poland
ul. Slowackiego 173
80-298 Gdansk, Poland
Email: sebastian.zwolinski@intel.com
11. Editors' Addresses
Dan Joyal
Nortel Networks
600 Technology Park Drive
Billerica, MA 01821
Email: djoyal@nortel.com
Vishwas Manral
SiNett Corporation
2/1, First Floor
Embassy Icon Annex
Infantry Road
Bangalore 560001
Email: vishwas@sinett.com
12. Differences from RFC 1850
(1) Textual Conventions are imported from INET-ADDRESS-MIB,
IF-MIB and OSPF-MIB MIBs.
(2) The "ospf" prefix for entity names is changed to
"ospfv3".
(3) General Group object name ospfVersionNumber is changed to
ospfv3VersionNumber and its value is changed from 2 to 3.
(4) General Group object name ospfExternLsaCount is changed
Internet Draft Expires November 2005 [Page 61]
OSPFv3 MIB May 2005
to ospfv3AsScopeLsaCount to indicate count of all AS-
scoped LSAs in the database.
(5) General Group object name ospfExternLsaCksumSum is
changed to ospfv3AsScopeCksumSum to indicate checksum of
all AS-scoped LSAs in the database.
(6) Removed General Group object ospfTOSSupport.
(7) Removed ospfAuthType object from Area entry.
(8) Changed object names ospfAreaLsaCount and
ospfAreaLsaCksumSum to ospfv3AreaScopeLsaCount and
ospfv3AreaScopeLsaCksumSum.
(9) Removed OSPF Area Default Metric Table.
(10) Added object ospfv3StubMetric to Area entry as substitute
for Area Default Metric Table.
(11) Changed name of External LSDB Table to AS-Scope LSDB
Table. Replaced object name prefix "ospfExtLsdb" with
"ospfv3AsLsdb".
(12) Changed name of LSDB Table to Area-Scope LSDB Table.
Replaced object name prefix "ospfLsdb" with
"ospfv3AreaLsdb".
(13) Added ospfv3LinkLsdbTable which contains all LSAs of
Link-Scope. Index of ospfv3LinkLsdbTable is interface
index, LSA Type, Router ID and LSID.
(14) Re-ordered Router ID and LSID index components of LSDB
table entries. Since LSIDs no longer have addressing
semantics, GET-NEXT operations on partial OIDs are more
useful when the Router ID component comes before the LSID
component.
(15) Address Range Table is removed.
(16) Removed ospfHostTOS from Host Table entry. Object
ospfHostIpAddress changed to ospfv3HostAddress with
SYNTAX changed from IpAddress to InetAddress.
(17) Added object ospfv3HostAddressType to Host Table entry to
determine the address type of ospfv3HostAddress.
(18) The MAX-ACCESS value of object ospfv3HostAreaID is
changed to read-create.
(19) Objects ospfIfIpAddress and ospfAddressLessIf removed
from Interface entry and as Interface Table entry index
components.
Internet Draft Expires November 2005 [Page 62]
OSPFv3 MIB May 2005
(20) Object ospfv3IfIndex added to Interface Table entry with
SYNTAX InterfaceIndex. It replaces ospfIfIpAddress and
ospfAddressLessIf as the Interface Table entry index.
(21) The SYNTAX of objects ospfIfDesignatedRouter and
ospfIfBackupDesignatedRouter is changed from IpAddress to
RouterID.
(22) Objects ospfIfAuthType and ospfIfAuthKey are removed from
Interface and Virtual Interface entries.
(23) Added objects ospfv3IfLinkScopeLsaCount and
ospfv3IfLinkLsaCksumSum to Interface entry. They maintain
the count of Link-Scope LSAs and the checksum of the
Link-Scope LSA database associated with the interface.
(24) Removed OSPF Interface Metric Table. Metric is now
accessed via object ospfv3IfMetricValue in the Interface
entry.
(25) Added object ospfv3IfInstId to Interface entry to enable
the setting of the interface instance value of the
interface. The default value is zero.
(26) Added object ospfv3VirtIfIndex to Virtual Interface entry
which is used to assign a local interface ID to the
virtual interface.
(27) Added objects ospfv3VirtIfLinkScopeLsaCount and
ospfv3VirtIfLinkLsaCksumSum to Virtual Interface entry.
They maintain the count of Link-Scope LSAs and the
checksum of the Link-Scope LSA database associated with
the virtual interface.
(28) The Neighbor Table (ospfv3NbrTable) is a read-only table
and it contains only the neighbors that were learned from
LSAs.
(29) Removed objects ospfNbrIpAddr and ospfNbrAddressLessIndex
from Neighbor entry.
(30) Added object ospfv3NbrIfIndex to Neighbor entry. Index
components ospfNbrIpAddr and ospfNbrAddressLessIndex are
replaced with ospfv3NbrIfIndex and ospfv3NbrRtrId.
(31) Added object ospfv3NbrAddressType to Neighbor entry to
determine the address type of ospfv3NbrAddress.
(32) Added object ospfv3NbrAddress to Neighbor entry. This
object contains the neighbor's IPv6 address.
(33) Removed objects ospfCfgNbrStatus and
Internet Draft Expires November 2005 [Page 63]
OSPFv3 MIB May 2005
ospfCfgNbrPermanence from Neighbor entry.
(34) Added object ospfv3NbrIfId to Neighbor entry. This object
contains the neighbor's local interface index from the
neighbor's hellos advertised on the link.
(35) The MAX-ACCESS value of object ospfNbrPriority is
changed to read-only. Removed DEFVAL for object
ospfv3NbrPriority.
(36) Added ospfv3CfgNbrTable (Configured Neighbor Table) which
contains all manually configured neighbors. Index of
ospfv3CfgNbrTable is ospfv3CfgNbrIfIndex,
ospfv3CfgAddressType, ospfv3CfgNbrAddress.
(37) Added object ospfv3VirtNbrIfIndex to Virtual Neighbor
entry. This is the interface index of the virtual link
over which the virtual neighbor is reached.
(38) Changed object name ospfVirtNbrIpAddr to
ospfv3VirtNbrAddress and SYNTAX from IpAddress to
InetAddress.
(39) Added object ospfv3VirtNbrAddressType to Virtual Neighbor
entry to determine the address type of
ospfv3VirtNbrAddress.
(40) Added object ospfv3VirtNbrIfId to Virtual Neighbor entry.
This is the virtual neighbor's local virtual interface
index from the neighbor's hellos advertised on the
virtual link.
(41) Changed object name ospfAreaAggregateMask to
ospfv3AreaAggregatePrefixLenth and SYNTAX from IpAddress
to InetAddressPrefixLength.
(42) Changed object name ospfAreaAggregateNet to
ospfv3AreaAggregatePrefix and SYNTAX from IpAddress to
InetAddress.
(43) Added object ospfv3AreaAggregatePrefixType to Area
Aggregate entry to determine the address type of
ospfv3AreaAggregatePrefix.
(44) Index for Area Aggregate Table entry changed from
ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
ospfAreaAggregateNet, ospfAreaAggregateMask to
ospfv3AreaAggregateAreaID,
ospfv3AreaAggregateAreaLsdbType,
ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefix,
ospfv3AreaAggregatePrefixLength.
Internet Draft Expires November 2005 [Page 64]
OSPFv3 MIB May 2005
(45) Conformance information is changed to reflect object
groups removed or added.
(46) OSPFv3 traps are not defined.
(47) Added UNITS clause for the following objects:
ospfv3ExitOverflowInterval,
ospfv3AreaNssaTranslatorStabilityInterval,
ospfv3AsLsdbAge, ospfv3AreaLsdbAge, ospfv3LinkLsdbAge,
ospfv3IfTransitDelay, ospfv3IfRetransInterval,
ospfv3IfHelloInterval, ospfv3IfRtrDeadInterval,
ospfv3IfPollInterval, ospfv3VirtIfTransitDelay,
ospfv3VirtIfRetransInterval, ospfv3VirtIfHelloInterval,
ospfv3VirtIfRtrDeadInterval.
(48) Changed SYNTAX from PositiveInteger to Unsigned32 for
the following objects: ospfv3ExitOverflowInterval,
ospfv3IfRtrDeadInterval, ospfv3IfPollInterval,
ospfv3VirtIfRtrDeadInterval.
(49) Changed MAX-ACCESS of row indices from read-only to
not-accessible.
(50) Added a new object ospfv3ExtLsaCount for support of RFC1765.
(51) Compiled cleanly the MIB using "smilint -m -s -l 9 -i
namelength-32".
(52) Removed LSA type enumerations from the LSDB tables, but
ranges added as required by compiler.
(53) Added object to LSDB tables to check if the LSA is locally
originated.
(54) Add External Route Tag to AreaAggregate Table for NSSA.
(55) Added Object for OSPFv3 Reference bandwidth.
(56) Graceful restart objects to general group.
(57) Graceful restart Objects to NBR MIBS.
(58) ospfv3AreaSummary default value has been changed to import
summary LSA's in line with RFC3101.
(59) Added support for inactive neighbor probing support over DC.
(60) Removed ospfv3HostAddressType and ospfv3CfgNbrAddressType
from the compliance module to get compiler over warnings.
The information is already there in the description.
Internet Draft Expires November 2005 [Page 65]
OSPFv3 MIB May 2005
(61) Changed description of ospfv3IfMetricValue to also refer
to the new Reference Bandwidth general group object.
(62) Added Table of contents.
(63) Added a section for contributorÆs address and added authors
of previous versions to that section.
(64) Changed working group mail address.
(65) Added a new TEXTUAL-CONVENTION Ospfv3UpToRefreshIntervalTc.
(66) Changed RestartAge, RestartInterval, TransitDelay,
RetransmitInterval in all MIBs to be of the syntax
Ospfv3UpToRefreshIntervalTc.
(67) Defined a new texual convention for Router Dead Range.
(68) Changed synax for all router dead intervals accordingly.
(69) Added OSPFv3AreaStubMetricType object.
(70) Changed names ospfv3SpfRuns =>> ospfv3AreaSpfRuns and
ospfv3StubMetric =>> ospfv3AreaStubMetric.
(71) Clarified description of ospfv3AreaAggregateRouteTag.
(72) Added a new Textual convention for Ospfv3RouterIdTc and
replaced all uses of RouterID with this new TC, based on
KeithÆs feedback.
(73) Removed all references to Site-Local Addresses, as they will
soon be deprecated.
(74) Used AS-External-LSAÆs instead of Type-5 and NSSA-LSAÆs
instead of Type-7.
(75) For ospfv3NbrRtrId and ospfv3CfgNbrRtrId removed description
referring to IP Address.
(76) Removed ospfv3TrafficEngineeringSupport to be consistent
with OSPFv2.
(77) Create new TC Ospfv3AreaIdTc with syntax Unsigned32 to
replace AreaID TC. Remove IMPORT of AreaID.
(78) LSID syntax changed from ipAddress to Unsigned32.
(79) TBD: Trap MIB to be added.
13. Full Copyright Statement
Internet Draft Expires November 2005 [Page 66]
OSPFv3 MIB May 2005
Copyright (C) The Internet Society (2005).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
14. Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Internet Draft Expires November 2005 [Page 67]