IETF Internet Draft PCE Working Group Jerry Ash (AT&T)
Proposed Status: Informational Editor
Expires: December 2006 J.L. Le Roux (France Telecom)
Editor
May 2006
draft-ietf-pce-comm-protocol-gen-reqs-05.txt
PCE Communication Protocol Generic Requirements
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on December 18, 2006.
Copyright Notice
Copyright (C) The Internet Society (2006).
Abstract
The PCE model is described in the "PCE Architecture" document and
facilitates path computation requests from Path Computation Clients
(PCCs) to Path Computation Elements (PCEs). This document specifies
generic requirements for a communication protocol between PCCs and
PCEs, and also between PCEs where cooperation between PCEs is
desirable. Subsequent documents will specify application-specific
requirements for the PCE communication protocol.
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 1]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
Table of Contents
1. Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Conventions used in this document . . . . . . . . . . . . . . . . 3
3. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5. Overview of PCE Communication Protocol (PCECP) . . . . . . . . . 4
6. PCE Communication Protocol Generic Requirements . . . . . . . . . 5
6.1 Basic Protocol Requirements . . . . . . . . . . . . . . . . . 5
6.1.1 Commonality of PCC-PCE and PCE-PCE Communication . . . 5
6.1.2 Client-Server Communication . . . . . . . . . . . . . . 5
6.1.3 Transport . . . . . . . . . . . . . . . . . . . . . . . 5
6.1.4 Path Computation Requests . . . . . . . . . . . . . . . 6
6.1.5 Path Computation Responses . . . . . . . . . . . . . . 7
6.1.6 Cancellation of Pending Requests . . . . . . . . . . . 8
6.1.7 Multiple Requests and Responses . . . . . . . . . . . . 8
6.1.8 Reliable Message Exchange . . . . . . . . . . . . . . . 8
6.1.9 Secure Message Exchange . . . . . . . . . . . . . . . . 9
6.1.10 Request Prioritization . . . . . . . . . . . . . . . . 10
6.1.11 Unsolicited Notifications . . . . . . . . . . . . . . 10
6.1.12 Asynchronous Communication . . . . . . . . . . . . . . 10
6.1.13 Communication Overhead Minimization . . . . . . . . . 10
6.1.14 Extensibility . . . . . . . . . . . . . . . . . . . . 10
6.1.15 Scalability . . . . . . . . . . . . . . . . . . . . . 11
6.1.16 Constraints . . . . . . . . . . . . . . . . . . . . . 12
6.1.17 Objective Functions Supported . . . . . . . . . . . . 12
6.2 Deployment Support Requirements . . . . . . . . . . . . . . . 13
6.2.1 Support for Different Service Provider Environments . . 13
6.2.2 Policy Support . . . . . . . . . . . . . . . . . . . . 13
6.3 Aliveness Detection & Recovery Requirements . . . . . . . . . 13
6.3.1 Aliveness Detection . . . . . . . . . . . . . . . . . . 13
6.3.2 Protocol Recovery . . . . . . . . . . . . . . . . . . . 14
6.3.3 LSP Rerouting & Reoptimization . . . . . . . . . . . . 14
6.4 Requirements Summary . . . . . . . . . . . . . . . . . . . . 14
7. Security Considerations . . . . . . . . . . . . . . . . . . . . . 17
8. Manageability Considerations . . . . . . . . . . . . . . . . . . 17
9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . . 18
10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 18
11. Normative References . . . . . . . . . . . . . . . . . . . . . . 18
12. Informational References . . . . . . . . . . . . . . . . . . . . 18
13. Authors' & Contributors' Addresses . . . . . . . . . . . . . . . 19
Intellectual Property Statement . . . . . . . . . . . . . . . . . . 20
Disclaimer of Validity . . . . . . . . . . . . . . . . . . . . . . . 21
Copyright Statement . . . . . . . . . . . . . . . . . . . . . . . . 21
1. Contributors
This document is the result of the PCE Working Group PCE
Communication Protocol (PCECP) requirements design team joint effort.
The following are the design team member authors that contributed to
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 2]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
the present document:
Jerry Ash (AT&T)
Alia Atlas (Google, Inc.)
Arthi Ayyangar (Juniper)
Nabil Bitar (Verizon)
Igor Bryskin (Independent Consultant)
Dean Cheng (Cisco)
Durga Gangisetti (MCI)
Kenji Kumaki (KDDI)
Jean-Louis Le Roux (France Telecom)
Eiji Oki (NTT)
Raymond Zhang (BT Infonet)
2. Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
3. Introduction
A Path Computation Element (PCE) [PCE-ARCH] supports requests for
path computation issued by a Path Computation Client (PCC), which may
be 'composite' (co-located) or 'external' (remote) from a PCE. When
the PCC is external from the PCE, a request/response communication
protocol is required to carry the path computation request and return
the response. In order for the PCC and PCE to communicate, the PCC
must know the location of the PCE: PCE discovery is described in
[PCE-DISC-REQ].
The PCE operates on a network graph in order to compute paths based
on the path computation request(s) issued by the PCC(s). The path
computation request will include the source and destination of the
paths to be computed, a set of constraints to be applied during the
computation, and may also include an objective function. The PCE
response includes the computed paths or the reason for a failed
computation.
This document lists a set of generic requirements for the PCECP.
Application-specific requirements are beyond the scope of this
document, and will be addressed in separate documents. For example,
application-specific communication protocol requirements are given in
[PCECP-INTER-AREA] and [PCECP-INTER-LAYER] for inter-area and
inter-layer PCE applications, respectively.
4. Terminology
Domain: any collection of network elements within a common sphere of
address management or path computational responsibility. Examples of
domains include IGP areas, Autonomous Systems (ASs), multiple ASs
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 3]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
within a service provider network, or multiple ASs across multiple
service provider networks.
GMPLS: Generalized Multi-Protocol Label Switching
LSP: MPLS/GMPLS Label Switched Path
LSR: Label Switch Router
MPLS: Multi-Protocol Label Switching
PCC: Path Computation Client: any client application requesting a
path computation to be performed by the PCE.
PCE: Path Computation Element: an entity (component, application or
network node) that is capable of computing a network path or route
based on a network graph and applying computational constraints (see
further description in [PCE-ARCH]).
TED: Traffic Engineering Database, which contains the topology and
resource information of the network or network segment used by a PCE.
TE LSP: Traffic Engineering (G)MPLS Label Switched Path.
See [PCE-ARCH] for further definitions of terms.
5. Overview of PCE Communication Protocol (PCECP)
In the PCE model, path computation requests are issued by a PCC
to a PCE that may be composite (co-located) or external (remote). If
the PCC and PCE are not co-located, a request/response communication
protocol is required to carry the request and return the response.
If the PCC and PCE are co-located, a communication protocol is not
required, but implementations may choose to utilize a protocol for
exchanges between the components.
In order that a PCC and PCE can communicate, the PCC must know the
location of the PCE. This can be configured or discovered. The PCE
discovery mechanism is out of scope of this document, but
requirements are documented in [PCE-DISC-REQ].
The PCE operates on a network graph built from the TED in order to
compute paths. The mechanism by which the TED is populated is out of
scope for the PCECP.
A path computation request issued by the PCC includes a specification
of the path(s) needed. The information supplied includes, at a
minimum, the source and destination for the paths, but may also
include a set of further requirements (known as constraints) as
described in Section 6.
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 4]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
The response from the PCE may be positive in which case it will
include the paths that have been computed. If the computation fails
or cannot be performed, a negative response is required with an
indication of the type of failure.
A request/response protocol is also required for a PCE to communicate
path computation requests to another PCE and for that PCE to return
the path computation response. As described in [PCE-ARCH], there is
no reason to assume that two different protocols are needed, and this
document assumes that a single protocol will satisfy all requirements
for PCC-PCE and PCE-PCE communication.
[PCE-ARCH] describes four models of PCE: composite, external,
multiple PCE path computation, and multiple PCE path computation with
inter-PCE communication. In all cases except the composite PCE model,
a PCECP is required. The requirements defined in this document are
applicable to all models described in the [PCE-ARCH].
6. PCE Communication Protocol Generic Requirements
Section 6.4 contains a summary of the requirements in this section.
6.1 Basic Protocol Requirements
6.1.1 Commonality of PCC-PCE and PCE-PCE Communication
A single protocol MUST be defined for PCC-PCE and PCE-PCE
communication. A PCE requesting a path from another PCE can be
considered as a PCC, and in the remainder of this document we refer
to all communications as PCC-PCE regardless of whether they are
PCC-PCE or PCE-PCE.
6.1.2 Client-Server Communication
PCC-PCE communication is by nature client-server based. The PCECP
MUST allow a PCC to send a request message to a PCE to request path
computation, and for a PCE to reply with a response message to the
requesting PCC once the path has been computed.
In addition to this request-response mode, there are cases where
there is unsolicited communication from the PCE to the PCC (see
Section 6.1.11).
6.1.3 Transport
The PCECP may utilize an existing transport protocol or operate
directly over IP.
If a transport protocol is used, it MAY be used to satisfy some
requirements stated in other sections of this document (for example,
reliability and security). Where requirements expressed in this
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 5]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
document match the function of existing transport protocols,
consideration MUST be given to the use of those protocols.
If a transport protocol is used, it MUST NOT limit the size of the
message used by the PCECP.
6.1.4 Path Computation Requests
The path computation request message MUST include at least the source
and destination. Note that the path computation request is for an
LSP or LSP segment, and the source and destination supplied are the
start and end of the computation being requested (i.e. of the LSP
segment).
The path computation request message MUST support the inclusion of a
set of one or more path constraints, including but not limited to the
requested bandwidth or resources (hops, affinities, etc.) to
include/exclude. For example, a PCC may request the PCE to exclude
points of failure in the computation of a new path if an LSP setup
fails. The actual inclusion of constraints is a choice for the PCC
issuing the request. A list of core constraints that must be
supported by the PCECP is supplied in Section 6.1.16. Specification
of constraints MUST be future-proofed as described in Section 6.1.14.
The requester MUST be allowed to select or prefer from an advertised
list or minimal subset of standard objective functions and functional
options. An objective function is used by the PCE to process
constraints to a path computation request when it computes a path in
order to select the "best" candidate paths (e.g., minimum hop path),
and corresponds to the optimization criteria used for the computation
of one path, or the synchronized computation of a set of paths. In
the case of unsynchronized path computation, this can be, for
example, the path cost or the residual bandwidth on the most loaded
path link. In the case of synchronized path computation, this can
be, for example, the global bandwidth consumption or the residual
bandwidth on the most loaded network link.
A list of core objective functions that MUST be supported by the
PCECP is supplied in Section 6.1.17. Specification of objective
functions MUST be future-proofed as described in Section 6.1.14.
The requester SHOULD also be able to select a vendor-specific or
experimental objective function or functional option. Furthermore,
the requester MUST be allowed to customize the function/options in
use. That is, individual objective functions will often have
parameters to be set in the request from PCC to PCE. Support for the
specification of objective functions and objective parameters is
required in the protocol extensibility specified in Section 6.1.14.
A request message MAY include TE parameters carried by the MPLS/GMPLS
LSP setup signaling protocol. Also, it MUST be possible for the PCE
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 6]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
to apply additional objective functions. This might include policy
based routing path computation for load balancing instructed by the
management plane.
Shortest path selection may rely either on the TE metric or on the
IGP metric [METRIC]. Hence the PCECP request message MUST allow the
PCC to indicate the metric type (IGP or TE) to be used for shortest
path selection. Note that other metric types may be specified in the
future.
There may be cases where a single path cannot fit a given bandwidth
request, while a set of paths could be combined to fit the request.
Such path combination to serve a given request is called
load-balancing. The request message MUST allow the PCC to indicate if
load-balancing is allowed or not. It MUST also include the maximum
number of paths in a load-balancing path group, and the minimum path
bandwidth in a load-balancing path group. The request message MUST
allow specification of the degree of disjointness of the members of
the load-balancing group.
6.1.5 Path Computation Responses
The path computation response message MUST allow the PCE to return
various elements including, at least, the computed path(s).
The protocol MUST be capable of returning any explicit path that
would be acceptable for use for MPLS and GMPLS LSPs once converted to
an Explicit Route Object for use in RSVP-TE signaling. In addition,
anything that can be expressed in an Explicit Route Object MUST be
capable of being returned in the computed path. Note that the
resultant path(s) may be made up of a set of strict or loose hops, or
any combination of strict and loose hops. Moreover, a hop may have
the form of a non-simple abstract node. See [RFC 3209] for the
definition of strict hop, loose hop, and abstract node.
A positive response from the PCE MUST include the paths that have
been computed. A positive PCECP computation response MUST support
the inclusion of a set of attributes of the computed path, such as
the path costs (e.g., cumulative link TE metrics and cumulative link
IGP metrics) and the computed bandwidth. The latter is useful when a
single path cannot serve the requested bandwidth and load balancing
is applied.
When a path satisfying the constraints cannot be found, or if the
computation fails or cannot be performed, a negative response MUST be
sent. This response MAY include further details of the reason(s) for
the failure, and MAY include advice about which constraints might be
relaxed to be more likely to achieve a positive result.
The PCECP response message MUST support the inclusion of the set of
computed paths of a load-balancing path group, as well as their
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 7]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
respective bandwidths.
6.1.6 Cancellation of Pending Requests
A PCC MUST be able to cancel a pending request using a notification
message. A PCC that has sent a request to a PCE and no longer needs
a response, for instance because it no longer wants to set up the
associated service, MUST be able to notify the PCE that it can clear
the request (i.e. stop the computation if already started, and clear
the context). The PCE may also wish to cancel a pending request
because of some congested state.
6.1.7 Multiple Requests and Responses
It MUST be possible to send multiple path computation requests
within the same request message. Such requests may be correlated (for
example, requesting disjoint paths) or uncorrelated (requesting paths
for unrelated services). It MUST be possible to limit by
configuration of both PCCs and PCEs the number of requests that can
be carried within a single message.
Similarly, it MUST be possible to return multiple computed paths
within the same response message, corresponding either to the same
request (e.g. multiple suited paths, paths of a load balancing path
group) or to distinct requests, correlated or not, of the same
request message or distinct request messages.
It MUST be possible to provide "continuation correlation" where all
related requests or computed paths cannot fit within one message, and
are carried in a sequence of correlated messages.
The PCE MUST inform the PCC of its capabilities. Maximum acceptable
message sizes and the maximum number of requests per message
supported by a PCE MAY form part of PCE capabilities advertisement
[PCE-DISC-REQ], or MAY be exchanged through information messages from
the PCE as part of the protocol described here.
It MUST be possible for a PCC to specify, in the request message, the
maximum acceptable response message sizes and the maximum number of
computed paths per response message it can support.
It MUST be possible to limit the message size by configuration on
PCCs and PCEs.
6.1.8 Reliable Message Exchange
The PCECP MUST support reliable transmission of PCECP packets. This
may form part of the protocol itself or may be achieved by the
selection of a suitable transport protocol (see Section 6.1.3).
In particular, it MUST allow for the detection and recovery of lost
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 8]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
messages to occur quickly and not impede the operation of the PCECP.
In some cases (e.g. after link failure), a large number of PCCs may
simultaneously send requests to a PCE, leading to a potential
saturation of the PCEs. The PCECP MUST support indication of
congestion state and rate limitation state. This should enable, for
example, a PCE to limit the rate of incoming request messages if the
request rate is too high.
The PCECP MUST provide:
- Detection and report of lost or corrupted messages
- Automatic attempts to retransmit lost messages without reference to
the application
- Handling of out-of-order messages
- Handling of duplicate messages
- Flow control and back-pressure to enable throttling of requests and
responses
- Rapid PCECP communication failure detection
- Distinction between partner failure and communication channel
failure after the PCECP communication is recovered
If it is necessary to add functions to PCECP to overcome shortcomings
in the chosen transport mechanisms, these functions SHOULD be based
on and re-use where possible techniques developed in other protocols
to overcome the same shortcomings. Functionality MUST NOT be added
to the PCECP where the chosen transport protocol already provides it.
6.1.9 Secure Message Exchange
The PCC-PCE communication protocol MUST include provisions to ensure
the security of the exchanges between the entities. In particular,
it MUST support mechanisms to prevent spoofing (e.g.,
authentication), snooping (e.g., encryption) and DOS attacks (e.g.,
rate limiting, no promiscuous listening).
The PCC-PCE communication protocol MUST include provisions to ensure
the security of the exchanges between the entities. In particular,
it MUST support mechanisms to prevent spoofing (e.g.,
authentication), snooping (e.g., encryption) and DOS attacks (e.g.,
packet filtering, rate limiting, no promiscuous listening). Where
the PCE-PCC communication takes place entirely within one limited
domain, the use of a private address space which is not available to
customer systems MAY be used to help protect the information
exchange, but other mechanisms MUST also be available.
This function may be provided by the transport protocol or directly
by the PCECP.
See Section 7 for further discussion of security considerations.
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 9]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
6.1.10 Request Prioritization
The PCECP MUST allow a PCC to specify the priority of a computation
request.
Implementation of priority-based activity within a PCE is subject to
implementation and local policy. This application processing is out
of scope of the PCECP.
6.1.11 Unsolicited Notifications
The normal operational mode is for the PCC to make path computation
requests to the PCE, and for the PCE to respond.
The PCECP MUST support unsolicited notifications from PCE to PCC, or
PCC to PCE. This requirement facilitates the unsolicited
communication of information and alerts between PCCs and PCEs.
6.1.12 Asynchronous Communication
The PCC-PCE protocol MUST allow for asynchronous communication. A
PCC MUST NOT have to wait for a response to one request before it can
make another request.
It MUST also be possible to have the order of responses differ from
the order of the corresponding requests. This may occur, for
instance, when path request messages have different priorities (see
Requirement 6.1.10). A consequent requirement is that path
computation responses MUST include a direct correlation to the
associated request.
6.1.13 Communication Overhead Minimization
The request and response messages SHOULD be designed so that the
communication overhead is minimized. In particular, the overhead per
message SHOULD be minimized, and the number of bytes exchanged to
arrive at a computation answer SHOULD be minimized. Other
considerations in overhead minimization include the following:
- the number of background messages used by the protocol or its
transport protocol to keep alive any session or association
between the PCE and PCC
- the processing cost at the PCE (or PCC) associated with
request/response messages (as distinct from processing the
computation requests themselves).
6.1.14 Extensibility
The PCECP MUST provide a way for the introduction of new path
computation constraints, diversity types, objective functions,
optimization methods and parameters, etc., without requiring
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 10]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
major modifications in the protocol.
The PCECP MUST be easily extensible to support various PCE based
applications that have been currently identified including:
- intra-area path computation [PCECP-INTER-AREA]
- inter-area path computation
- inter-AS intra provider and inter-AS inter-provider path
computation
- inter-layer path computation [PCECP-INTER-LAYER]
The PCECP MUST support the requirements specified in the
application-specific requirements documents. The PCECP MUST also
allow extensions as more PCE applications will be introduced in the
future.
The PCECP SHOULD also be extensible to support future applications
not currently in the scope of the PCE working group, such as, for
instance, point-to-multipoint path computations, multi-hop pseudowire
path computation, etc.
Note that application specific requirements are out of the scope of
this document and will be addressed in separate requirements
documents.
6.1.15 Scalability
The PCECP MUST scale well, at least as good as linearly, with an
increase of any of the following parameters (note, minimum order of
magnitude estimates of what the PCECP should support are given in
parenthesis):
- number of PCCs (1000/domain)
- number of PCEs (100/domain)
- number of PCCs communicating with a single PCE (1000)
- number of PCEs communicated to by a single PCC (100)
- number of domains (20)
- number of path request messages (average of 10/second/PCE)
- handling bursts of requests (burst of 100/second/PCE within a 10-
second interval).
Note that path requests can be bundled in path request messages, for
example, 10 PCECP request messages/second may correspond to 100 path
requests/second.
Bursts of requests may arise, for example, after a network outage
when multiple recomputations are requested. The PCECP MUST handle
the congestion in a graceful way so that it does not unduly impact
the rest of the network, and so that it does not gate the ability of
the PCE to perform computation.
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 11]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
6.1.16 Constraints
This section provides a list of generic constraints that MUST be
supported by the PCECP. Other constraints may be added to service
specific applications as identified by separate application-specific
requirements documents.
Note that the absence of a constraint in this list does not mean that
the constraint must not be supported. Note also that the provisions
of Section 6.1.14 mean that new constraints can be added to this list
without impacting the protocol to a level that requires major
protocol changes.
Here is the list of generic constraints that MUST be supported:
o MPLS-TE and GMPLS generic constraints:
- Bandwidth
- Affinities inclusion/exclusion
- Link, Node, SRLG inclusion/exclusion
- Maximum end-to-end IGP metric
- Maximum Hop Count
- Maximum end-to-end TE metric
- Degree of paths disjointess (Link, Node, SRLG)
o MPLS-TE specific constraints
- Class-type
- Local protection
- Node protection
- Bandwidth protection
o GMPLS specific constraints
- Switching type, encoding type
- Link protection type
6.1.17 Objective Functions Supported
This section provides a list of generic objective functions that MUST
be supported by the PCECP. Other objectives functions MAY be added
to service specific applications as identified by separate
application-specific requirements documents.
Note that the absence of an objective function in this list does not
mean that the objective function may not be supported. Note also
that the provisions of Section 6.1.14 mean that new objective
functions MAY be added to this list without impacting the protocol.
The PCECP MUST support the following "unsynchronized" objective
functions:
- Minimum cost path with respect to a specified metric(shortest path)
- Least loaded path
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 12]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
- Maximum available bandwidth path
Also the PCECP MUST support the following "synchronized" objective
functions:
- Minimize aggregate bandwidth consumption on all links
- Maximize the residual bandwidth on the most loaded link
- Minimize the cumulative cost of a set of diverse paths.
6.2 Deployment Support Requirements
6.2.1 Support for Different Service Provider Environments
The PCECP MUST operate in various different service provider network
environments that utilize an IP-based control plane, including
- MPLS-TE and GMPLS networks
- packet and non-packet networks
- centralized and distributed PCE path computation
- single and multiple PCE path computation
Definitions of centralized, distributed, single, and multiple PCE
path computation can be found in [PCE-ARCH].
6.2.2 Policy Support
The PCECP MUST allow for the use of policies to accept/reject
requests, and include the ability for a PCE to supply sufficient
detail when it rejects a request for policy reasons to allow the PCC
to determine the reason for rejection or failure. For example,
filtering could be required for a PCE that serves one domain (perhaps
an AS) such that all requests that come from another domain (AS) are
rejected. However, specific policy details are left to
application-specific PCECP requirements. Actual policies,
configuration of policies, and applicability of policies are out of
scope.
Note that work on supported policy models and the corresponding
requirements/implications is being undertaken as a separate work item
in the PCE working group.
PCECP messages MUST be able to carry transparent policy information.
6.3 Aliveness Detection & Recovery Requirements
6.3.1 Aliveness Detection
The PCECP MUST allow a PCC to
- check the liveliness of the PCC-PCE communication
- rapidly detect PCC-PCE communication failure (indifferently to
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 13]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
partner failure or connectivity failure),
- distinguish PCC/PCE node failures from PCC-PCE connectivity
failures, after the PCC-PCE communication is recovered.
The aliveness detection mechanism MUST ensure reciprocal knowledge of
PCE and PCC liveness.
6.3.2 Protocol Recovery
In the event of the failure of a sender or of the communication
channel, the PCECP, upon recovery, MUST support resynchronization of
information and requests between the sender and the receiver, and
this SHOULD be arranged so as to minimize repeat data transfer.
6.3.3 LSP Rerouting & Reoptimization
If an LSP fails owing to the failure of a link or node that it
traverses, a new computation request may be made to a PCE in order to
repair the LSP. Since the PCC cannot know that the PCE's TED has been
updated to reflect the failure network information, it is useful to
include this information in the new path computation request. Also,
in order to re-use the resources used by the old LSP, it may be
advantageous to indicate the route of the old LSP as part of the new
path computation request.
Hence the path computation request message MUST allow an indication
of whether the computation is for LSP restoration, and MUST support
the inclusion of the previously computed path as well as the identity
of the failed element. Note that the old path might only be useful
if the old LSP has not yet been torn down.
Note that a network failure may impact a large number of LSPs. In
this case, a potentially large number of PCCs is going to
simultaneously send requests to the PCE. The PCECP MUST properly
handle such overload situations, such as for instance through
throttling of requests as set forth in section 6.1.8.
The path computation request message MUST support TE LSP path
reoptimization and the inclusion of a previously computed path. This
will help ensure optimal routing of a reoptimized path, since it will
allow the PCE to avoid double bandwidth accounting and help reduce
blocking issues.
6.4 Requirements Summary
The following is a summary of the requirements in Section 6:
Requirement Necessity Ref.
------------------------------------------------------------------
Commonality of PCC-PCE and PCE-PCE communication MUST 6.1.1
Client-server communication MUST 6.1.2
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 14]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
Support PCC/PCE request message to request path
computation MUST 6.1.2
Support PCE response message with computed path MUST 6.1.2
Support unsolicited communication PCE-PCC SHOULD 6.1.2
Maintain PCC-PCE session NON-RQMT 6.1.2
Use of existing transport protocol MAY 6.1.3
Transport protocol satisfy reliability & security
requirements MAY 6.1.3
Transport protocol limits size of message MUST NOT 6.1.3
Support path computation requests MUST 6.1.4
Path computation request includes source &
destination MUST 6.1.4
Support path constraints (e.g., bandwidth, hops,
affinities) to include/exclude MUST 6.1.4
Allow to select/prefer from advertised list of
standard objective functions/options MUST 6.1.4
Allow to customize objective function/options MUST 6.1.4
Allow indicating the metric type (IGP or TE) to
be used for shortest path selection MUST 6.1.4
Allow indicating the set of path attributes
required in response message MUST 6.1.4
Allow indicating if load-balancing is allowed MUST 6.1.4
Support path computation responses MUST 6.1.5
Negative response support reasons for failure,
constraints to relax to achieve positive result SHOULD 6.1.5
Support inclusion of set of path attributes MUST 6.1.5
Support inclusion of set of computed paths of a
load-balancing path group, as well as their
respective bandwidth MUST 6.1.5
Cancellation of pending requests MUST 6.1.6
Multiple requests and responses MUST 6.1.7
Limit by configuration number of requests within
a message MUST 6.1.7
Support multiple computed paths in response MUST 6.1.7
Support "continuation correlation" where related
requests or computed paths cannot fit within
one message MUST 6.1.7
Maximum message size & maximum number of requests
per message exchanged through PCE messages to
PCC, or indicated in request message MAY 6.1.7
Reliable message exchange (achieved by PCECP
itself or transport protocol) MUST 6.1.8
Allow detection & recovery of lost messages to
occur quickly & not impede operation of PCECP MUST 6.1.8
Handle overload situations without significant
decrease in performance, e.g., through
throttling of requests MUST 6.1.8
Detect/report lost/corrupted messages, retransmit
lost messages, handle out-of-order messages &
duplicate messages, provide flow control/
back-pressure to throttle messages, detect
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 15]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
PCECP communication failure detection MUST 6.1.8
Functionality added to PCECP if transport
protocol provides it SHOULD NOT 6.1.8
Secure message exchange (provided by PCECP or
transport protocol MUST 6.1.9
Support mechanisms to prevent spoofing (e.g.,
authentication), snooping (e.g., encryption),
DOS attacks MUST 6.1.9
Request prioritization MUST 6.1.10
Unsolicited notifications SHOULD 6.1.11
Allow asynchronous communication MUST 6.1.12
PCC has to wait for response before making
another request MUST NOT 6.1.12
Allow order of responses differ from order of
requests MUST 6.1.12
Communication overhead minimization SHOULD 6.1.13
Give particular attention to message size SHOULD 6.1.13
Extensibility without requiring modifications to
protocol MUST 6.1.14
Easily extensible to support intra-area,
inter-area, inter-AS intra provider, inter-AS
inter-provider, multi-layer path & virtual
network topology path computation MUST 6.1.14
Easily extensible to support future applications
not in scope (e.g., point-to-multipoint path
computations) SHOULD 6.1.14
Scale at least linearly with number of PCCs,
PCEs, PCCs communicating with single PCE, PCEs
communicated to by single PCC, domains, path
requests, handling bursts of requests MUST 6.1.15
Support path computation constraints MUST 6.1.16
Support "unsynchronized" & "synchronized"
objective functions MUST 6.1.17
Support different service provider environments
(e.g., MPLS-TE and GMPLS networks, centralized
& distributed PCE path computation, single &
multiple PCE path computation) MUST 6.2.1
Policy support for policies to accept/reject
requests, PCC to determine reason for
rejection, notification of policy violation MUST 6.2.2
Aliveness detection of PCCs/PCEs, PCECP failure
detection MUST 6.3.1
Protocol recovery support resynchronization of
information & requests between sender &
receiver MUST 6.3.2
Minimize repeat data transfer, allow PCE to
respond to computation requests issued before
failure without requests being re-issued SHOULD 6.3.2
Stateful PCE able to resynchronize/recover
states (e.g., LSP status, paths) after restart SHOULD 6.3.2
Allow indicating if computation is for LSP
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 16]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
restoration (support inclusion of previously
computed path & failed element) MUST 6.3.3
Support path reoptimization & inclusion of a
previously computed path MUST 6.3.3
7. Security Considerations
The impact of the use of a PCECP MUST be considered in the light of
the impact that it has on the security of the existing routing and
signaling protocols and techniques in use within the network.
Intra-domain security is impacted since there is a new interface,
protocol and element in the network. Any host in the network could
impersonate a PCC, and receive detailed information on network paths.
Any host could also impersonate a PCE, both gathering information
about the network before passing the request on to a real PCE, and
spoofing responses. Some protection here depends on the security of
the PCE discovery process (see [PCE-DISC-REQ]). An increase in
inter-domain information flows may increase the vulnerability to
security attacks, and the facilitation of inter-domain paths may
increase the impact of these security attacks.
Of particular relevance are the implications for confidentiality
inherent in a PCECP for multi-domain networks. It is not necessarily
the case that a multi-domain PCE solution will compromise security,
but solutions MUST examine their impacts in this area.
Applicability statements for particular combinations of signaling,
routing and path computation techniques are expected to contain
detailed security sections.
It should be observed that the use of an external PCE introduces
additional security issues. Most notable amongst these are:
- interception of PCE requests or responses
- impersonation of PCE or PCC
- DoS attacks on PCEs or PCCs
The PCECP MUST address these issues in detail using authentication,
encryption and DoS protection techniques. See also Section 6.1.9.
8. Manageability Considerations
Manageability of the PCECP MUST address the following considerations:
- the need for a MIB module for control and monitoring of PCECP
- the need for built-in diagnostic tools to test the operation of the
protocol (e.g., partner failure detection, OAM, etc.)
- configuration implications for the protocol
PCECP operations MUST be modeled and controlled through appropriate
MIB modules. Statistics gathering will form an important part of the
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 17]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
operation of the PCECP. The operator MUST be able to determine PCECP
historical interactions and the success rate of requests using data
from MIB modules. Similarly, it is important for an operator to be
able to determine PCECP and PCE load and whether an individual PCC is
responsible for a disproportionate amount of the load. It MUST be
possible, through use of MIB modules, to record and inspect
statistics about the PCECP communications, including issues such as
malformed messages, unauthorized messages and messages discarded
owing to congestion.
The new MIB modules should also be used to provide notifications
(traps) when thresholds are crossed or when important events occur.
PCECP techniques must enable a PCC to determine the liveness of a PCE
both before it sends a request and in the period between sending a
request and receiving a response.
It is also important for a PCE to know about the liveness of PCCs to
gain a predictive view of the likely loading of a PCE in the future,
and to allow a PCE to abandon processing of a received request.
The PCECP MUST support indication of congestion state and rate
limitation state, and MAY allow the operator to control such a
function.
9. IANA Considerations
This document makes no requests for IANA action.
10. Acknowledgements
The authors would like to extend their warmest thanks to (in
alphabetical order) Lou Berger, Ross Callon, Adrian Farrel, Thomas
Morin, Dimitri Papadimitriou, and JP Vasseur for their review and
suggestions.
11. Normative References
[PCE-ARCH] Farrel, A., Vasseur, JP, Ash, J., "Path Computation
Element (PCE) Architecture", work in progress.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
12. Informational References
[METRIC] Le Faucheur, F., et. al., "Use of Interior Gateway Protocol
(IGP) Metric as a second MPLS Traffic Engineering (TE) Metric", BCP
87, RFC 3785, May 2004.
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 18]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
[PCE-DISC-REQ] Le Roux, JL, et. al., "Requirements for Path
Computation Element (PCE) Discovery," work in progress.
[PCECP-INTER-AREA] Le Roux, JL, et. al., "PCE Communication Protocol
(PCECP) specific requirements for Inter-Area (G)MPLS Traffic
Engineering," work in progress.
[PCECP-INTER-LAYER] Oki, E., et. al., "PCC-PCE Communication
Requirements for Inter-Layer Traffic Engineering," work in progress.
13. Authors' & Contributors' Addresses
Jerry Ash (Editor)
AT&T
Room MT D5-2A01
200 Laurel Avenue
Middletown, NJ 07748, USA
Phone: (732)-420-4578
Email: gash@att.com
Jean-Louis Le Roux (Editor)
France Telecom
2, avenue Pierre-Marzin
22307 Lannion Cedex, FRANCE
Email: jeanlouis.leroux@francetelecom.com
Alia K. Atlas
Google Inc.
1600 Amphitheatre Parkway
Mountain View, CA 94043
Email: akatlas@alum.mit.edu
Arthi Ayyangar
Juniper Networks, Inc.
1194 N.Mathilda Ave
Sunnyvale, CA 94089 USA
Email: arthi@juniper.net
Nabil Bitar
Verizon
40 Sylvan Road
Waltham, MA 02145
Email: nabil.bitar@verizon.com
Igor Bryskin
Independent Consultant
Email: i_bryskin@yahoo.com
Dean Cheng
Cisco Systems Inc.
3700 Cisco Way
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 19]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
San Jose CA 95134 USA
Phone: 408 527 0677
Email: dcheng@cisco.com
Durga Gangisetti
MCI
Email: durga.gangisetti@mci.com
Kenji Kumaki
KDDI Corporation
Garden Air Tower
Iidabashi, Chiyoda-ku,
Tokyo 102-8460, JAPAN
Phone: 3-6678-3103
Email: ke-kumaki@kddi.com
Eiji Oki
NTT
Midori-cho 3-9-11
Musashino-shi, Tokyo 180-8585, JAPAN
Email: oki.eiji@lab.ntt.co.jp
Raymond Zhang
BT INFONET Services Corporation
2160 E. Grand Ave.
El Segundo, CA 90245 USA
Email: Raymond_zhang@bt.infonet.com
Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 20]
Internet Draft PCE Communication Protocol Generic Reqmnts May 2006
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (C) The Internet Society (2006). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
PCE Design Team <draft-ietf-pce-comm-protocol-gen-reqs-05.txt> [Page 21]