Internet Engineering Task Force S. Hollenbeck
Internet-Draft VeriSign, Inc.
May 30, 2001 Expires: November 30, 2001
Extensible Provisioning Protocol Contact Mapping
<draft-ietf-provreg-epp-contact-00.txt>
Status of this Memo
This document is an Internet-Draft and is in full conformance with all
provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Task
Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress".
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Abstract
This document describes an Extensible Provisioning Protocol (EPP)
mapping for the provisioning and management of individual or
organizational social information identifiers (known as "contacts")
stored in a shared central repository. Specified in XML, the mapping
defines EPP command syntax and semantics as applied to contacts.
Conventions Used In This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
In examples, "C:" represents lines sent by a protocol client and "S:"
represents lines returned by a protocol server. Indentation in
examples is provided only to illustrate element relationships and is
not a REQUIRED feature of this protocol.
XML protocol elements are case sensitive. Data carried in XML is case
insensitive unless stated otherwise.
Hollenbeck Expires November 30, 2001 [Page 1]
Internet-Draft EPP Contact mapping May 30, 2001
Table of Contents
1. Introduction ................................................. 3
2. Object Attributes ............................................ 4
2.1 Contact and Client Identifiers .............................. 4
2.2 Status Values ............................................... 4
2.3 Individual and Organizational Names ......................... 5
2.4 Address ..................................................... 5
2.4.1 Street, City, and State or Province ....................... 6
2.4.2 Postal Code ............................................... 6
2.4.3 Country ................................................... 6
2.5 Telephone Numbers ........................................... 6
2.6 E-Mail Addresses ............................................ 6
2.7 Dates and Times ............................................. 6
2.8 Authorization Information ................................... 6
3. EPP Command mapping .......................................... 8
3.1 EPP Query Commands .......................................... 8
3.1.1 EPP <check> Command ....................................... 8
3.1.2 EPP <info> Command ........................................ 9
3.1.3 EPP <transfer> Command .................................... 13
3.2 EPP Transform Commands ...................................... 15
3.2.1 EPP <create> Command ...................................... 15
3.2.2 EPP <delete> Command ...................................... 18
3.2.3 EPP <renew> Command ....................................... 19
3.2.4 EPP <transfer> Command .................................... 20
3.2.5 EPP <update> Command ...................................... 21
4. Formal Syntax ................................................ 24
5. Internationalization Considerations .......................... 32
6. IANA Considerations .......................................... 32
7. Security Considerations ...................................... 32
8. References ................................................... 34
9. Author's Address ............................................. 35
A. Revisions From Previous Version .............................. 36
B. Full Copyright Statement ..................................... 37
Hollenbeck Expires November 30, 2001 [Page 2]
Internet-Draft EPP Contact mapping May 30, 2001
1. Introduction
This document describes a personal and organizational identifier
mapping for version 1.0 of the Extensible Provisioning Protocol (EPP).
This mapping is specified using the Extensible Markup Language (XML)
1.0 as described in [XML] and XML Schema notation as described in
[XMLS-1] and [XMLS-2].
[EPP] provides a complete description of EPP command and response
structures. A thorough understanding of the base protocol
specification is necessary to understand the mapping described in this
document.
It is important to note that XML is case sensitive. XML
specifications and examples provided in this document MUST be
interpreted in the exact character case presented to develop a
conforming implementation.
This document is being discussed on the "ietf-provreg" mailing list.
To join the list, send a message to <majordomo@cafax.se> with the
words "subscribe ietf-provreg" in the body of the message. There is a
web site for the list archives at http://www.cafax.se/ietf-provreg.
Hollenbeck Expires November 30, 2001 [Page 3]
Internet-Draft EPP Contact mapping May 30, 2001
2. Object Attributes
An EPP contact object has attributes and associated values that may be
viewed and modified by the sponsoring client or the server. This
section describes each attribute type in detail. The formal syntax
for the attribute values described here can be found in the "Formal
Syntax" section of this document.
2.1 Contact and Client Identifiers
All EPP contacts are identified by a server-unique identifier.
Contact identifiers are character strings with a specified minimum
length, a specified maximum length, and a specified format. Contact
identifiers use the "clIDType" client identifier syntax described in
[EPP].
2.2 Status Values
A contact object MUST always have at least one associated status
value. Status values MAY be set only by the client that sponsors a
contact object and by the server on which the object resides. A
client MAY change the status of a contact object using the EPP
<update> command. Each status value MAY be accompanied by a string of
human-readable text that describes the rationale for the status
applied to the object.
A client MUST NOT alter status values set by the server. A server MAY
alter or override status values set by a client subject to local
server policies.
Status values that may be added or removed by a client are prefixed
with "client". Corresponding status values that may be added or
removed by a server are prefixed with "server". Status values that do
not begin with either "client" or "server" are server-managed.
Status Value Descriptions:
clientDeleteProhibited, serverDeleteProhibited
Requests to delete the object MUST be rejected.
clientTransferProhibited, serverTransferProhibited
Requests to transfer the object MUST be rejected.
clientUpdateProhibited, serverUpdateProhibited
Requests to update the object (other than to remove this status) MUST
Hollenbeck Expires November 30, 2001 [Page 4]
Internet-Draft EPP Contact mapping May 30, 2001
be rejected.
linked
The contact object has at least one active association with another
object, such as a domain object. Servers SHOULD provide services to
determine existing object associations.
ok
This is the nominal status value for an object that has no pending
operations or prohibitions.
pendingDelete
A delete request has been received for the object, but the object has
not yet been purged from the server database.
pendingTransfer
A transfer request has been received for the object, and completion of
the request is pending. Transform commands other than <transfer> MUST
be rejected while an object is in this state.
"ok" status MUST NOT be combined with any other status.
"pendingDelete" status MUST NOT be combined with either
"clientDeleteProhibited" or "serverDeleteProhibited" status.
"pendingTransfer" status MUST NOT be combined with either
"clientTransferProhibited" or "serverTransferProhibited" status. All
other status value combinations are valid.
2.3 Individual and Organizational Names
Individual and organizational names associated with a contact are
represented using character strings. These strings have a specified
minimum length and a specified maximum length. Individual and
organizational names MAY be provided in both a subset of UTF-8
[RFC2279] that can be represented in 7-bit ASCII [US-ASCII] and
unrestricted UTF-8.
2.4 Address
Every contact has associated postal address information. A postal
address contains street information, city information, OPTIONAL
state/province information, an OPTIONAL postal code, and a country
identifier as described in [ISO11180]. Address information MAY be
provided in both a subset of UTF-8 [RFC2279] that can be represented
in 7-bit ASCII [US-ASCII] and unrestricted UTF-8. Address elements
Hollenbeck Expires November 30, 2001 [Page 5]
Internet-Draft EPP Contact mapping May 30, 2001
MUST be exchanged in the order described in the protocol schema, but
display order MAY be altered to reflect local preferences.
2.4.1 Street, City, and State or Province
Contact street, city, and state or province information is represented
using character strings. These strings have a specified minimum
length and a specified maximum length.
2.4.2 Postal Code
Contact postal codes are represented using character strings. These
strings have a specified minimum length and a specified maximum
length.
2.4.3 Country
Contact country identifiers are represented using two-character
identifiers specified in [ISO3166].
2.5 Telephone Numbers
Contact telephone number structure requirements are defined in
[E164a]. Telephone numbers described in this mapping are character
strings that MUST begin with a plus sign ("+", ASCII value 0x002B),
followed by a country code defined in [E164b], followed by a dot (".",
ASCII value 0x002E), followed by a sequence of digits representing the
telephone number. An optional "x" attribute is provided to note
telephone extension information.
2.6 E-Mail Addresses
E-mail address syntax is defined in [RFC2822]. This mapping does not
prescribe minimum or maximum lengths for character strings used to
represent e-mail addresses.
2.7 Dates and Times
Date and time attribute values MUST be represented in Universal
Coordinated Time (UTC) using the Gregorian calendar. Both extended and
truncated date and time forms defined in [ISO8601] MAY be used, though
a server SHOULD use one form or the other consistently.
2.8 Authorization Information
Authorization information is associated with domain objects to
facilitate transfer operations. Authorization information is assigned
when a domain object is created, and it MAY be updated in the future.
Hollenbeck Expires November 30, 2001 [Page 6]
Internet-Draft EPP Contact mapping May 30, 2001
This specification describes password-based authorization information,
though other mechanisms are possible.
Hollenbeck Expires November 30, 2001 [Page 7]
Internet-Draft EPP Contact mapping May 30, 2001
3. EPP Command mapping
A detailed description of the EPP syntax and semantics can be found in
[EPP]. The command mappings described here are specifically for use
in provisioning and managing contact objects via EPP.
3.1 EPP Query Commands
EPP provides three commands to retrieve contact information: <check>
to determine if a contact object is known to the server, <info> to
retrieve detailed information associated with a contact object, and
<transfer> to retrieve contact object transfer status information.
3.1.1 EPP <check> Command
The EPP <check> command is used to determine if a contact object is
known to the server. In addition to the standard EPP command
elements, the <check> command MUST contain a <contact:check> element
that identifies the contact namespace and the location of the contact
schema. The <contact:check> element SHALL contain the following child
elements:
- One or more <contact:id> elements that contain the server-unique
identifier of the contact objects to be queried.
Example <check> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <check>
C: <contact:check xmlns:contact="urn:iana:xml:ns:contact"
C: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
C: <contact:id>sh8013</contact:id>
C: <contact:id>sah8013</contact:id>
C: <contact:id>8013sah</contact:id>
C: </contact:check>
C: </check>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <check> command has been processed successfully, the EPP
<resData> element MUST contain a child <contact:chkData> element that
identifies the contact namespace and the location of the contact
Hollenbeck Expires November 30, 2001 [Page 8]
Internet-Draft EPP Contact mapping May 30, 2001
schema. The <contact:chkData> element SHALL contain the following
child elements:
- One or more <contact:cd> elements that contain the repository object
identifier for the queried contact objects and an "x" attribute whose
value identifies the object as either "+" for a known object or "-"
for an unknown object.
Example <check> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <contact:chkData xmlns:contact="urn:iana:xml:ns:contact"
S: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
S: <contact:cd x="+">sh8013</contact:cd>
S: <contact:cd x="-">sah8013</contact:cd>
S: <contact:cd x="+">8013sah</contact:cd>
S: </contact:chkData>
S: </resData>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <check> command can not be
processed for any reason.
3.1.2 EPP <info> Command
The EPP <info> command is used to retrieve information associated with
a contact object. In addition to the standard EPP command elements,
the <info> command MUST contain a <contact:info> element that
identifies the contact namespace and the location of the contact
schema. The <contact:info> element SHALL contain the following child
elements:
- A <contact:id> element that contains the server-unique identifier of
the contact object to be queried.
Hollenbeck Expires November 30, 2001 [Page 9]
Internet-Draft EPP Contact mapping May 30, 2001
Example <info> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <info>
C: <contact:info xmlns:contact="urn:iana:xml:ns:contact"
C: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
C: <contact:id>sh8013</contact:id>
C: </contact:info>
C: </info>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When an <info> command has been processed successfully, the EPP
<resData> element MUST contain a child <contact:infData> element that
identifies the contact namespace and the location of the contact
schema. The <contact:infData> element SHALL contain the following
child elements:
- A <contact:id> element that contains the server-unique identifier of
the contact object.
- One or more <contact:status> elements that describe the status of
the contact object.
- A <contact:ascii> element that contains child elements whose content
MUST be represented in a subset of UTF-8 that can be represented in
the 7-bit US-ASCII character set.
- An OPTIONAL <contact:i15d> ("i15d" is short for "internationalized")
element that contains child elements whose content SHALL be
represented in unrestricted UTF-8. The <contact:ascii> and
<contact:i15d> elements SHALL contain the following child elements:
- A <contact:name> element that contains the name of the individual
or role represented by the contact.
- An OPTIONAL <contact:org> element that contains the name of the
organization with which the contact is affiliated.
- A <contact:addr> element that contains address information
associated with the contact. A <contact:addr> element SHALL contain
Hollenbeck Expires November 30, 2001 [Page 10]
Internet-Draft EPP Contact mapping May 30, 2001
the following child elements:
- One, two, or three <contact:street> elements that contain the
contact's street address.
- A <contact:city> element that contains the contact's city.
- An OPTIONAL <contact:sp> element that contains the contact's
state or province.
- An OPTIONAL <contact:pc> element that contains the contact's
postal code.
- A <contact:cc> element that contains the contact's country code.
- An OPTIONAL <contact:voice> element that contains the contact's
voice telephone number.
- An OPTIONAL <contact:fax> element that contains the contact's
facsimile telephone number.
- A <contact:email> element that contains the contact's e-mail
address.
- A <contact:clID> element that contains the identifier of the
sponsoring client.
- A <contact:crID> element that contains the identifier of the client
that created the contact object.
- A <contact:crDate> element that contains the date and time of
contact object creation.
- A <contact:upID> element that contains the identifier of the client
that last updated the contact object. This element MUST NOT be
present if the contact has never been modified.
- A <contact:upDate> element that contains the date and time of the
most recent contact object modification. This element MUST NOT be
present if the contact object has never been modified.
- A <contact:trDate> elements that contains the date and time of the
most recent successful contact object transfer. This element MUST NOT
be provided if the contact object has never been transferred.
- A <contact:authInfo> element that contains authorization information
associated with the contact object. This element MUST NOT be provided
if the querying client is not the current sponsoring client.
Hollenbeck Expires November 30, 2001 [Page 11]
Internet-Draft EPP Contact mapping May 30, 2001
Example <info> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <contact:infData xmlns:contact="urn:iana:xml:ns:contact"
S: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
S: <contact:id>sh8013</contact:id>
S: <contact:status s="linked"/>
S: <contact:status s="clientDeleteProhibited"/>
S: <contact:ascii>
S: <contact:name>John Doe</contact:name>
S: <contact:org>Example Inc.</contact:org>
S: <contact:addr>
S: <contact:street>123 Example Dr.</contact:street>
S: <contact:street>Suite 100</contact:street>
S: <contact:city>Dulles</contact:city>
S: <contact:sp>VA</contact:sp>
S: <contact:pc>20166-6503</contact:pc>
S: <contact:cc>US</contact:cc>
S: </contact:addr>
S: </contact:ascii>
S: <contact:voice x="1234">+1.7035555555</contact:voice>
S: <contact:fax>+1.7035555556</contact:fax>
S: <contact:email>jdoe@example.com</contact:email>
S: <contact:clID>ClientY</contact:clID>
S: <contact:crID>ClientX</contact:crID>
S: <contact:crDate>1999-04-03T22:00:00.0Z</contact:crDate>
S: <contact:upID>ClientX</contact:upID>
S: <contact:upDate>1999-12-03T09:00:00.0Z</contact:upDate>
S: <contact:trDate>2000-04-08T09:00:00.0Z</contact:trDate>
S: <contact:authInfo type="pw">2fooBAR</contact:authInfo>
S: </contact:infData>
S: </resData>
S: <unspec/>
S: <roid>SH8013-VRSN</roid>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
Hollenbeck Expires November 30, 2001 [Page 12]
Internet-Draft EPP Contact mapping May 30, 2001
S:</epp>
An EPP error response MUST be returned if an <info> command can not be
processed for any reason.
3.1.3 EPP <transfer> Command
The EPP <transfer> command provides a query operation that allows a
client to determine real-time status of pending and completed transfer
requests. In addition to the standard EPP command elements, the
<transfer> command MUST contain an "op" attribute with value "query",
and a <contact:transfer> element that identifies the contact namespace
and the location of the contact schema. The <contact:transfer>
element MUST contain the following child elements:
- A <contact:id> element that contains the server-unique identifier of
the contact object to be queried.
Example <transfer> query command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <transfer op="query">
C: <contact:transfer xmlns:contact="urn:iana:xml:ns:contact"
C: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
C: <contact:id>sh8013</contact:id>
C: </contact:transfer>
C: </transfer>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <transfer> query command has been processed successfully, the
EPP <resData> element MUST contain a child <contact:trnData> element
that identifies the contact namespace and the location of the contact
schema. The <contact:trnData> element SHALL contain the following
child elements:
- A <contact:id> element that contains the server-unique identifier
for the queried contact.
- A <contact:trStatus> element that contains the state of the most
recent transfer request.
Hollenbeck Expires November 30, 2001 [Page 13]
Internet-Draft EPP Contact mapping May 30, 2001
- A <contact:reID> element that contains the identifier of the client
that requested the object transfer.
- A <contact:reDate> element that contains the date and time that the
transfer was requested.
- A <contact:acID> element that contains the identifier of the client
that SHOULD act upon the transfer request.
- A <contact:acDate> element that contains the date and time of a
required or completed response. For a pending request, the value
identifies the date and time by which a response is required before an
automated response action SHOULD be taken by the server. For all
other status types, the value identifies the date and time when the
request was completed.
Example <transfer> query response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <contact:trnData xmlns:contact="urn:iana:xml:ns:contact"
S: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
S: <contact:id>sh8013</contact:id>
S: <contact:trStatus>pending</contact:trStatus>
S: <contact:reID>ClientX</contact:reID>
S: <contact:reDate>2000-06-06T22:00:00.0Z</contact:reDate>
S: <contact:acID>ClientY</contact:acID>
S: <contact:acDate>2000-06-11T22:00:00.0Z</contact:acDate>
S: </contact:trnData>
S: </resData>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <transfer> query command
can not be processed for any reason.
Hollenbeck Expires November 30, 2001 [Page 14]
Internet-Draft EPP Contact mapping May 30, 2001
3.2 EPP Transform Commands
EPP provides four commands to transform contact object information:
<create> to create an instance of a contact object, <delete> to delete
an instance of a contact object, <transfer> to manage contact object
sponsorship changes, and <update> to change information associated
with a contact object. This document does not define a mapping for
the EPP <renew> command.
3.2.1 EPP <create> Command
The EPP <create> command provides a transform operation that allows a
client to create a contact object. In addition to the standard EPP
command elements, the <create> command MUST contain a <contact:create>
element that identifies the contact namespace and the location of the
contact schema. The <contact:create> element SHALL contain the
following child elements:
- A <contact:id> element that contains the desired server-unique
identifier for the contact to be created.
- A <contact:ascii> element that contains child elements whose content
MUST be represented in a subset of UTF-8 that can be represented in
the 7-bit US-ASCII character set.
- An OPTIONAL <contact:i15d> ("i15d" is short for "internationalized")
element that contains child elements whose content SHALL be
represented in unrestricted UTF-8. The <contact:ascii> and
<contact:i15d> elements SHALL contain the following child elements:
- A <contact:name> element that contains the name of the individual
or role represented by the contact.
- An OPTIONAL <contact:org> element that contains the name of the
organization with which the contact is affiliated.
- A <contact:addr> element that contains address information
associated with the contact. A <contact:addr> element SHALL contain
the following child elements:
- One, two, or three <contact:street> elements that contain the
contact's street address.
- A <contact:city> element that contains the contact's city.
- An OPTIONAL <contact:sp> element that contains the contact's
state or province.
Hollenbeck Expires November 30, 2001 [Page 15]
Internet-Draft EPP Contact mapping May 30, 2001
- An OPTIONAL <contact:pc> element that contains the contact's
postal code.
- A <contact:cc> element that contains the contact's country code.
- An OPTIONAL <contact:voice> element that contains the contact's
voice telephone number.
- An OPTIONAL <contact:fax> element that contains the contact's
facsimile telephone number.
- A <contact:email> element that contains the contact's e-mail
address.
- A <contact:authInfo> element that contains authorization information
to be associated with the contact object.
Hollenbeck Expires November 30, 2001 [Page 16]
Internet-Draft EPP Contact mapping May 30, 2001
Example <create> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <create>
C: <contact:create xmlns:contact="urn:iana:xml:ns:contact"
C: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
C: <contact:id>sh8013</contact:id>
C: <contact:ascii>
C: <contact:name>John Doe</contact:name>
C: <contact:org>Example Inc.</contact:org>
C: <contact:addr>
C: <contact:street>123 Example Dr.</contact:street>
C: <contact:street>Suite 100</contact:street>
C: <contact:city>Dulles</contact:city>
C: <contact:sp>VA</contact:sp>
C: <contact:pc>20166-6503</contact:pc>
C: <contact:cc>US</contact:cc>
C: </contact:addr>
C: </contact:ascii>
C: <contact:voice x="1234">+1.7035555555</contact:voice>
C: <contact:fax>+1.7035555556</contact:fax>
C: <contact:email>jdoe@example.com</contact:email>
C: <contact:authInfo type="pw">2fooBAR</contact:authInfo>
C: </contact:create>
C: </create>
C: <unspec/>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When a <create> command has been processed successfully, the EPP
<resData> element MUST contain a child <contact:creData> element that
identifies the contact namespace and the location of the contact
schema. The <contact:creData> element SHALL contain the following
child elements:
- A <contact:id> element that contains the server-unique identifier
for the created contact.
Hollenbeck Expires November 30, 2001 [Page 17]
Internet-Draft EPP Contact mapping May 30, 2001
Example <create> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <contact:creData xmlns:contact="urn:iana:xml:ns:contact"
S: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
S: <contact:id>sh8013</contact:id>
S: </contact:creData>
S: </resData>
S: <unspec/>
S: <roid>SH8013-VRSN</roid>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <create> command can not
be processed for any reason.
3.2.2 EPP <delete> Command
The EPP <delete> command provides a transform operation that allows a
client to delete a contact object. In addition to the standard EPP
command elements, the <delete> command MUST contain a <contact:delete>
element that identifies the contact namespace and the location of the
contact schema. The <contact:delete> element MUST contain the
following child elements:
- A <contact:id> element that contains the server-unique identifier of
the contact object to be deleted.
A contact object SHOULD NOT be deleted if it is associated with other
known objects. An associated contact SHOULD NOT be deleted until
associations with other known objects have been broken.
Hollenbeck Expires November 30, 2001 [Page 18]
Internet-Draft EPP Contact mapping May 30, 2001
Example <delete> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <delete>
C: <contact:delete xmlns:contact="urn:iana:xml:ns:contact"
C: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
C: <contact:id>sh8013</contact:id>
C: </contact:delete>
C: </delete>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <delete> command has been processed successfully, a server MUST
respond with an EPP response with no <resData> element.
Example <delete> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <delete> command can not
be processed for any reason.
3.2.3 EPP <renew> Command
Renewal semantics do not apply to contact objects, so there is no
mapping defined for the EPP <renew> command.
Hollenbeck Expires November 30, 2001 [Page 19]
Internet-Draft EPP Contact mapping May 30, 2001
3.2.4 EPP <transfer> Command
The EPP <transfer> command provides a transform operation that allows
a client to manage requests to transfer the sponsorship of a contact
object. In addition to the standard EPP command elements, the
<transfer> command MUST contain a <contact:transfer> element that
identifies the contact namespace and the location of the contact
schema. The <contact:transfer> element SHALL contain the following
child elements:
- A <contact:id> element that contains the server-unique identifier of
the contact object for which a transfer request is to be created,
approved, rejected, or cancelled.
- A <contact:authInfo> element that contains authorization information
associated with the contact object. This element is REQUIRED only
when a transfer is requested, and it SHALL be ignored if used
otherwise.
Every EPP <transfer> command MUST contain an "op" attribute that
identifies the transfer operation to be performed as defined in [EPP].
Example <transfer> request command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <transfer op="request">
C: <contact:transfer xmlns:contact="urn:iana:xml:ns:contact"
C: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
C: <contact:id>sh8013</contact:id>
C: <contact:authInfo type="pw">2fooBAR</contact:authInfo>
C: </contact:transfer>
C: </transfer>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <transfer> command has been processed successfully, the EPP
<resData> element MUST contain a child <contact:trnData> element that
identifies the contact namespace and the location of the contact
schema. The <contact:trnData> element SHALL contain the same child
elements defined for a transfer query response.
Hollenbeck Expires November 30, 2001 [Page 20]
Internet-Draft EPP Contact mapping May 30, 2001
Example <transfer> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <contact:trnData xmlns:contact="urn:iana:xml:ns:contact"
S: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
S: <contact:id>sh8013</contact:id>
S: <contact:trStatus>pending</contact:trStatus>
S: <contact:reID>ClientX</contact:reID>
S: <contact:reDate>2000-06-08T22:00:00.0Z</contact:reDate>
S: <contact:acID>ClientY</contact:acID>
S: <contact:acDate>2000-06-13T22:00:00.0Z</contact:acDate>
S: </contact:trnData>
S: </resData>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <transfer> command can not
be processed for any reason.
3.2.5 EPP <update> Command
The EPP <update> command provides a transform operation that allows a
client to modify the attributes of a contact object. In addition to
the standard EPP command elements, the <update> command MUST contain a
<contact:update> element that identifies the contact namespace and the
location of the contact schema. The <contact:update> element SHALL
contain the following child elements:
- A <contact:id> element that contains the server-unique identifier of
the contact object to be updated.
- An OPTIONAL <contact:add> element that contains attribute values to
be added to the object.
Hollenbeck Expires November 30, 2001 [Page 21]
Internet-Draft EPP Contact mapping May 30, 2001
- An OPTIONAL <contact:rem> element that contains attribute values to
be removed from the object.
- An OPTIONAL <contact:chg> element that contains object attribute
values to be changed.
At least one <contact:add>, <contact:rem>, or <contact:chg> element
MUST be provided. The <contact:add> and <contact:rem> elements SHALL
contain the following child elements:
- One or more <contact:status> elements that contain status values to
be associated with or removed from the object. When specifying a
value to be removed, only the attribute value is significant; element
text is not required to match a value for removal.
A <contact:chg> element SHALL contain the following OPTIONAL child
elements:
- A <contact:name> element that contains the name of the individual or
role represented by the contact.
- A <contact:org> element that contains the name of the organization
with which the contact is affiliated.
- A <contact:addr> element that contains address information
associated with the contact. A <contact:addr> element SHALL contain
the following OPTIONAL child elements:
- One, two, or three <contact:street> elements that contain the
contact's street address.
- A <contact:city> element that contains the contact's city.
- A <contact:sp> element that contains the contact's state or
province.
- A <contact:pc> element that contains the contact's postal code.
- A <contact:cc> element that contains the contact's country code.
- A <contact:voice> element that contains the contact's voice
telephone number.
- A <contact:fax> element that contains the contact's facsimile
telephone number.
- A <contact:email> element that contains the contact's e-mail
address.
Hollenbeck Expires November 30, 2001 [Page 22]
Internet-Draft EPP Contact mapping May 30, 2001
Example <update> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <update>
C: <contact:update xmlns:contact="urn:iana:xml:ns:contact"
C: xsi:schemaLocation="urn:iana:xml:ns:contact contact.xsd">
C: <contact:id>sh8013</contact:id>
C: <contact:add>
C: <contact:status s="clientDeleteProhibited"/>
C: </contact:add>
C: <contact:chg>
C: <contact:ascii>
C: <contact:org/>
C: <contact:addr>
C: <contact:street>124 Example Dr.</contact:street>
C: <contact:street>Suite 200</contact:street>
C: <contact:city>Dulles</contact:city>
C: <contact:sp>VA</contact:sp>
C: <contact:pc>20166-6503</contact:pc>
C: <contact:cc>US</contact:cc>
C: </contact:addr>
C: </contact:ascii>
C: <contact:voice>+1.7034444444</contact:voice>
C: <contact:fax/>
C: <contact:authInfo type="pw">2BARfoo</contact:authInfo>
C: </contact:chg>
C: </contact:update>
C: </update>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When an <update> command has been processed successfully, a server
MUST respond with an EPP response with no <resData> element.
Hollenbeck Expires November 30, 2001 [Page 23]
Internet-Draft EPP Contact mapping May 30, 2001
Example <update> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if an <update> command can not
be processed for any reason.
4. Formal Syntax
An EPP object mapping is specified in XML Schema notation. The formal
syntax presented here is a complete schema representation of the
object mapping suitable for automated validation of EPP XML instances.
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="urn:iana:xml:ns:contact"
xmlns:contact="urn:iana:xml:ns:contact"
xmlns:epp="urn:iana:xml:ns:epp"
xmlns:eppcom="urn:iana:xml:ns:eppcom"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<!--
Import common element types.
-->
<import namespace="urn:iana:xml:ns:eppcom"
schemaLocation="eppcom.xsd"/>
<import namespace="urn:iana:xml:ns:epp"
schemaLocation="epp.xsd"/>
<annotation>
<documentation>
Extensible Provisioning Protocol v1.0
Hollenbeck Expires November 30, 2001 [Page 24]
Internet-Draft EPP Contact mapping May 30, 2001
contact provisioning schema.
</documentation>
</annotation>
<!--
Types used within an EPP greeting.
-->
<element name="svc"/>
<!--
Child elements found in EPP commands.
-->
<element name="check" type="contact:mIDType"/>
<element name="create" type="contact:createType"/>
<element name="delete" type="contact:sIDType"/>
<element name="info" type="contact:sIDType"/>
<element name="transfer" type="contact:transferType"/>
<element name="update" type="contact:updateType"/>
<!--
Utility types.
-->
<simpleType name="ccType">
<restriction base="token">
<length value="2"/>
</restriction>
</simpleType>
<complexType name="e164Type">
<simpleContent>
<extension base = "contact:e164StringType">
<attribute name="x" type="normalizedString"
use="optional"/>
</extension>
</simpleContent>
</complexType>
<simpleType name="e164StringType">
<restriction base="normalizedString">
<pattern value="(+[0-9]{1,3}.[0-9]{1,12})?"/>
</restriction>
</simpleType>
<simpleType name="pcType">
<restriction base="token">
<maxLength value="10"/>
</restriction>
</simpleType>
Hollenbeck Expires November 30, 2001 [Page 25]
Internet-Draft EPP Contact mapping May 30, 2001
<simpleType name="postalLineType">
<restriction base="normalizedString">
<maxLength value="30"/>
</restriction>
</simpleType>
<!--
Child elements of the <create> and <info> commands.
-->
<complexType name="createType">
<sequence>
<element name="id" type="eppcom:clIDType"/>
<element name="ascii" type="contact:postalType"/>
<element name="i15d" type="contact:postalType"
minOccurs="0"/>
<element name="voice" type="contact:e164Type"
minOccurs="0"/>
<element name="fax" type="contact:e164Type"
minOccurs="0"/>
<element name="email" type="normalizedString"/>
<element name="authInfo" type="eppcom:authInfoType"/>
</sequence>
</complexType>
<complexType name="postalType">
<sequence>
<element name="name" type="contact:postalLineType"/>
<element name="org" type="contact:postalLineType"
minOccurs="0"/>
<element name="addr" type="contact:addrType"/>
</sequence>
</complexType>
<complexType name="addrType">
<sequence>
<element name="street" type="contact:postalLineType"
maxOccurs="3"/>
<element name="city" type="contact:postalLineType"/>
<element name="sp" type="contact:postalLineType"
minOccurs="0"/>
<element name="pc" type="contact:pcType"
minOccurs="0"/>
<element name="cc" type="contact:ccType"/>
</sequence>
</complexType>
<!--
Child element of commands that require only an identifier.
Hollenbeck Expires November 30, 2001 [Page 26]
Internet-Draft EPP Contact mapping May 30, 2001
-->
<complexType name="sIDType">
<sequence>
<element name="id" type="eppcom:clIDType"/>
</sequence>
</complexType>
<!--
Child element of commands that accept multiple identifiers.
-->
<complexType name="mIDType">
<sequence>
<element name="id" type="eppcom:clIDType"
maxOccurs="unbounded"/>
</sequence>
</complexType>
<!--
Child elements of the <transfer> command.
-->
<complexType name="transferType">
<sequence>
<element name="id" type="eppcom:clIDType"/>
<element name="authInfo" type="eppcom:authInfoType"
minOccurs="0"/>
</sequence>
</complexType>
<!--
Child elements of the <update> command.
-->
<complexType name="updateType">
<sequence>
<element name="id" type="eppcom:clIDType"/>
<choice minOccurs="1" maxOccurs="3">
<element name="add" type="contact:addRemType"
minOccurs="0"/>
<element name="rem" type="contact:addRemType"
minOccurs="0"/>
<element name="chg" type="contact:chgType"
minOccurs="0"/>
</choice>
</sequence>
</complexType>
<!--
Data elements that can be added or removed.
-->
Hollenbeck Expires November 30, 2001 [Page 27]
Internet-Draft EPP Contact mapping May 30, 2001
<complexType name="addRemType">
<sequence>
<element name="status" type="contact:statusType"
maxOccurs="9"/>
</sequence>
</complexType>
<!--
Data elements that can be changed.
-->
<complexType name="chgType">
<choice minOccurs="1" maxOccurs="6">
<element name="ascii" type="contact:chgDataType"
minOccurs="0"/>
<element name="i15d" type="contact:chgDataType"
minOccurs="0"/>
<element name="voice" type="contact:e164Type"
minOccurs="0"/>
<element name="fax" type="contact:e164Type"
minOccurs="0"/>
<element name="email" type="normalizedString"
minOccurs="0"/>
<element name="authInfo" type="eppcom:authInfoType"
minOccurs="0"/>
</choice>
</complexType>
<complexType name="chgDataType">
<choice minOccurs="1" maxOccurs="3">
<element name="name" type="contact:postalLineType"
minOccurs="0"/>
<element name="org" type="contact:postalLineType"
minOccurs="0"/>
<element name="addr" type="contact:addrType"
minOccurs="0"/>
</choice>
</complexType>
<!--
Child response elements.
-->
<element name="chkData" type="contact:chkDataType"/>
<element name="creData" type="contact:creDataType"/>
<element name="infData" type="contact:infDataType"/>
<element name="trnData" type="contact:trnDataType"/>
<!--
<check> response elements.
Hollenbeck Expires November 30, 2001 [Page 28]
Internet-Draft EPP Contact mapping May 30, 2001
-->
<complexType name="chkDataType">
<sequence>
<element name="cd" type="contact:checkType"
maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="checkType">
<simpleContent>
<extension base = "eppcom:clIDType">
<attribute name="x" type="eppcom:checkType"
use="required"/>
</extension>
</simpleContent>
</complexType>
<!--
<create> response elements.
-->
<complexType name="creDataType">
<sequence>
<element name="id" type="eppcom:clIDType"/>
</sequence>
</complexType>
<!--
<info> response elements.
-->
<complexType name="infDataType">
<sequence>
<element name="id" type="eppcom:clIDType"/>
<element name="status" type="contact:statusType"
maxOccurs="8"/>
<element name="ascii" type="contact:postalType"/>
<element name="i15d" type="contact:postalType"
minOccurs="0"/>
<element name="voice" type="contact:e164Type"
minOccurs="0"/>
<element name="fax" type="contact:e164Type"
minOccurs="0"/>
<element name="email" type="normalizedString"/>
<element name="clID" type="eppcom:clIDType"/>
<element name="crID" type="eppcom:clIDType"/>
<element name="crDate" type="dateTime"/>
<element name="upID" type="eppcom:clIDType"
minOccurs="0"/>
<element name="upDate" type="dateTime"
Hollenbeck Expires November 30, 2001 [Page 29]
Internet-Draft EPP Contact mapping May 30, 2001
minOccurs="0"/>
<element name="trDate" type="dateTime"
minOccurs="0"/>
<element name="authInfo" type="eppcom:authInfoType"/>
</sequence>
</complexType>
<!--
Status is a combination of attributes and an optional human-readable
message that may be expressed in languages other than English.
-->
<complexType name="statusType">
<simpleContent>
<extension base="normalizedString">
<attribute name="s" type="contact:statusValueType"
use="required"/>
<attribute name="lang" type="language"
use="optional" default="en"/>
</extension>
</simpleContent>
</complexType>
<simpleType name="statusValueType">
<restriction base="token">
<enumeration value="clientDeleteProhibited"/>
<enumeration value="clientTransferProhibited"/>
<enumeration value="clientUpdateProhibited"/>
<enumeration value="linked"/>
<enumeration value="ok"/>
<enumeration value="pendingDelete"/>
<enumeration value="pendingTransfer"/>
<enumeration value="serverDeleteProhibited"/>
<enumeration value="serverTransferProhibited"/>
<enumeration value="serverUpdateProhibited"/>
</restriction>
</simpleType>
<!--
<transfer> response elements.
-->
<complexType name="trnDataType">
<sequence>
<element name="id" type="eppcom:clIDType"/>
<element name="trStatus" type="eppcom:trStatusType"/>
<element name="reID" type="eppcom:clIDType"/>
<element name="reDate" type="dateTime"/>
<element name="acID" type="eppcom:clIDType"/>
<element name="acDate" type="dateTime"/>
Hollenbeck Expires November 30, 2001 [Page 30]
Internet-Draft EPP Contact mapping May 30, 2001
</sequence>
</complexType>
<!--
End of schema.
-->
</schema>
Hollenbeck Expires November 30, 2001 [Page 31]
Internet-Draft EPP Contact mapping May 30, 2001
5. Internationalization Considerations
EPP is represented in XML, which provides native support for encoding
information using the double-byte Unicode character set and its more
compact representations including UTF-8. Compliant XML processors are
REQUIRED to understand both UTF-8 and raw Unicode character sets.
Though XML includes provisions to identify other character set
encodings through use of an "encoding" attribute in an <?xml?>
declaration, EPP use with character sets other than UTF-8 is NOT
RECOMMENDED.
All date-time values presented via EPP MUST be expressed in Universal
Coordinated Time using the Gregorian calendar. XML Schema allows use
of time zone identifiers to indicate offsets from the zero meridian,
but this option MUST NOT be used with EPP. Both extended and
truncated date and time forms defined in [ISO8601] MAY be used, though
a server SHOULD use one form or the other consistently.
Humans, organizations, and other entities often need to represent
social information in both a commonly understood character set and a
locally optimized character set. This specification provides features
allowing representation of social information in both a subset of
UTF-8 for broad readability and unrestricted UTF-8 for local
optimization.
6. IANA Considerations
XML schemas require a URI for unique identification. Schemas MUST be
registered to ensure URI uniqueness, but the IETF does not currently
have a recommended repository for the registration of XML schemas.
This document uses URNs to describe XML namespaces and XML schemas
conforming to a registry mechanism described in [IANA-XML].
IANA SHOULD maintain a registry of XML namespace and schema URI
assignments. URI assignment requests SHOULD be reviewed by a
designated expert, and values SHOULD be assigned only as a result of
standards action taken by the IESG.
This document requests assignment of the following URIs:
urn:iana:xml:ns:contact: The namespace URI for this EPP mapping.
urn:iana:xml:xmlschema:contact: The schema URI for this EPP mapping.
7. Security Considerations
The object mapping described in this document does not provide any
security services beyond those specified by [EPP] and protocol layers
Hollenbeck Expires November 30, 2001 [Page 32]
Internet-Draft EPP Contact mapping May 30, 2001
used by EPP.
Hollenbeck Expires November 30, 2001 [Page 33]
Internet-Draft EPP Contact mapping May 30, 2001
8. References
[E164a] ITU-T Recommendation E.164: "The International Public
Telecommunication Numbering Plan", May 1997.
[E164b] Complement To ITU-T Recommendation E.164 (05/1997): "List of
ITU-T Recommendation E.164 assigned country codes", June 2000.
[EPP] S. Hollenbeck: "Extensible Provisioning Protocol", work in
progress.
[IANA-XML] M. Mealling: "The IANA XML Registry", work in progress.
[ISO3166] ISO 3166-1: "Codes for the representation of names of
countries and their subdivisions - Part 1: Country codes", October
1997.
[ISO8601] ISO 8601:1988 (E): "Data elements and interchange formats -
Information interchange - Representation of dates and times", June
1988.
[ISO11180] ISO 11180:1993 (E): "Postal addressing", March 1993.
[RFC2119] S. Bradner: "Key Words for Use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2279] F. Yergeau: "UTF-8, a transformation format of ISO 10646",
RFC 2279, January 1998.
[RFC2822] P. Resnick: "Internet Message Format", RFC 2822, April 2001.
[US-ASCII] Coded Character Set -- 7-bit American Standard Code for
Information Interchange, ANSI X3.4-1986; also: ISO/IEC 646 (IRV).
[XML] Editor T. Bray et al.: "Extensible Markup Language (XML) 1.0
(Second Edition)", W3C Recommendation 6 October 2000.
[XMLS-1] Editors H. Thompson et al.: "XML Schema Part 1: Structures",
W3C Recommendation 2 May 2001.
[XMLS-2] Editors P. Biron, A. Malhotra: "XML Schema Part 2:
Datatypes", W3C Recommendation 2 May 2001.
Hollenbeck Expires November 30, 2001 [Page 34]
Internet-Draft EPP Contact mapping May 30, 2001
9. Author's Address
Scott Hollenbeck
VeriSign Global Registry Services
21345 Ridgetop Circle
Dulles, VA 20166-6503
USA
shollenbeck@verisign.com
Hollenbeck Expires November 30, 2001 [Page 35]
Internet-Draft EPP Contact mapping May 30, 2001
A. Revisions From Previous Version
This is the initial provreg working group version.
Hollenbeck Expires November 30, 2001 [Page 36]
Internet-Draft EPP Contact mapping May 30, 2001
B. Full Copyright Statement
Copyright (C) The Internet Society 2001. All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published and
distributed, in whole or in part, without restriction of any kind,
provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of developing
Internet standards in which case the procedures for copyrights defined
in the Internet Standards process must be followed, or as required to
translate it into languages other than English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN
WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Hollenbeck Expires November 30, 2001 [Page 37]