Internet Engineering Task Force S. Hollenbeck
Internet-Draft VeriSign, Inc.
May 30, 2001 Expires: November 30, 2001
Extensible Provisioning Protocol Host Mapping
<draft-ietf-provreg-epp-host-00.txt>
Status of this Memo
This document is an Internet-Draft and is in full conformance with all
provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Task
Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress".
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Abstract
This document describes an Extensible Provisioning Protocol (EPP)
mapping for the provisioning and management of Internet host names
stored in a shared central repository. Specified in XML, the mapping
defines EPP command syntax and semantics as applied to host names.
Conventions Used In This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
In examples, "C:" represents lines sent by a protocol client and "S:"
represents lines returned by a protocol server. Indentation in
examples is provided only to illustrate element relationships and is
not a REQUIRED feature of this protocol.
XML protocol elements are case sensitive. Data carried in XML is case
insensitive unless stated otherwise.
Hollenbeck Expires November 30, 2001 [Page 1]
Internet-Draft EPP Host Mapping May 30, 2001
Table of Contents
1. Introduction ................................................. 3
2. Object Attributes ............................................ 4
2.1 Host Names .................................................. 4
2.2 Client Identifiers .......................................... 4
2.3 Status Values ............................................... 4
2.4 Dates and Times ............................................. 5
2.5 IP Addresses ................................................ 5
3. EPP Command Mapping .......................................... 6
3.1 EPP Query Commands .......................................... 6
3.1.1 EPP <check> Command ....................................... 6
3.1.2 EPP <info> Command ........................................ 7
3.1.3 EPP <transfer> Command .................................... 10
3.2 EPP Transform Commands ...................................... 10
3.2.1 EPP <create> Command ...................................... 10
3.2.2 EPP <delete> Command ...................................... 12
3.2.3 EPP <renew> Command ....................................... 13
3.2.4 EPP <transfer> Command .................................... 14
3.2.5 EPP <update> Command ...................................... 14
4. Formal Syntax ................................................ 16
5. Internationalization Considerations .......................... 22
6. IANA Considerations .......................................... 22
7. Security Considerations ...................................... 22
8. References ................................................... 23
9. Author's Address ............................................. 24
A. Revisions From Previous Version .............................. 25
B. Full Copyright Statement ..................................... 26
Hollenbeck Expires November 30, 2001 [Page 2]
Internet-Draft EPP Host Mapping May 30, 2001
1. Introduction
This document describes an Internet host name mapping for version 1.0
of the Extensible Provisioning Protocol (EPP). This mapping is
specified using the Extensible Markup Language (XML) 1.0 as described
in [XML] and XML Schema notation as described in [XMLS-1] and [XMLS-
2].
[EPP] provides a complete description of EPP command and response
structures. A thorough understanding of the base protocol
specification is necessary to understand the mapping described in this
document.
This document assumes that host name objects have a subordinate
relationship to a superordinate domain name object. For example, host
name "ns1.example.com" has a subordinate relationship to domain name
"example.com". EPP actions (such as object transfers) that do not
preserve this relationship MUST be explicitly disallowed.
It is important to note that XML is case sensitive. XML
specifications and examples provided in this document MUST be
interpreted in the exact character case presented to develop a
conforming implementation.
This document is being discussed on the "ietf-provreg" mailing list.
To join the list, send a message to <majordomo@cafax.se> with the
words "subscribe ietf-provreg" in the body of the message. There is a
web site for the list archives at http://www.cafax.se/ietf-provreg.
Hollenbeck Expires November 30, 2001 [Page 3]
Internet-Draft EPP Host Mapping May 30, 2001
2. Object Attributes
An EPP host object has attributes and associated values that may be
viewed and modified by the sponsoring client or the server. This
section describes each attribute type in detail.
2.1 Host Names
The syntax for host names described in this document MUST conform to
[RFC952] as updated by [RFC1123]. These conformance requirements MAY
change as a result of progressing work in developing standards for
internationalized host names.
2.2 Client Identifiers
All EPP clients are identified by a server-unique identifier. Client
identifiers conform to the "clIDType" syntax described in [EPP].
2.3 Status Values
A host object MUST always have at least one associated status value.
Status values MAY be set only by the client that sponsors a host
object and by the server on which the object resides. A client MAY
change the status of a host object using the EPP <update> command.
Each status value MAY be accompanied by a string of human-readable
text that describes the rationale for the status applied to the
object.
A client MUST NOT alter status values set by the server. A server MAY
alter or override status values set by a client subject to local
server policies.
Status values that may be added or removed by a client are prefixed
with "client". Corresponding status values that may be added or
removed by a server are prefixed with "server". Status values that do
not begin with either "client" or "server" are server-managed.
Status Value Descriptions:
clientDeleteProhibited, serverDeleteProhibited
Requests to delete the object MUST be rejected.
clientUpdateProhibited, serverUpdateProhibited
Requests to update the object (other than to remove this status) MUST
be rejected.
Hollenbeck Expires November 30, 2001 [Page 4]
Internet-Draft EPP Host Mapping May 30, 2001
linked
The host object has at least one active association with another
object, such as a domain object. Servers SHOULD provide services to
determine existing object associations.
ok
This is the nominal status value for an object that has no pending
operations or prohibitions.
pendingDelete
A delete request has been received for the object, but the object has
not yet been purged from the server database.
pendingTransfer
A transfer request has been received for the host object's
superordinate domain object, and completion of the request is pending.
"ok" status MUST NOT be combined with any other status.
"pendingDelete" status MUST NOT be combined with either
"clientDeleteProhibited" or "serverDeleteProhibited" status. All
other status value combinations are valid.
2.4 Dates and Times
Date and time attribute values MUST be represented in Universal
Coordinated Time (UTC) using the Gregorian calendar. Both extended and
truncated date and time forms defined in [ISO8601] MAY be used, though
a server SHOULD use one form or the other consistently.
2.5 IP Addresses
The syntax for IPv4 addresses described in this document MUST conform
to [RFC791]. The syntax for IPv6 addresses described in this document
MUST conform to [RFC1884]. Practical considerations for publishing
IPv6 address information in zone files is documented in [RFC1886] and
[RFC2874].
A server SHOULD reject assignments of IP addresses to hosts using IP
addresses that have not been allocated for public use. A list of IPv4
address allocations is maintained in [IANAa]. A list of IPv6 address
allocations is maintained in [IANAb]. Additional IPv4 address
allocations that are not for public use are documented in [RFC1918].
Hollenbeck Expires November 30, 2001 [Page 5]
Internet-Draft EPP Host Mapping May 30, 2001
3. EPP Command Mapping
A detailed description of the EPP syntax and semantics can be found in
[EPP]. The command mappings described here are specifically for use
in provisioning and managing Internet host names via EPP.
3.1 EPP Query Commands
EPP provides two commands to retrieve host information: <check> to
determine if a host object is known to the server, and <info> to
retrieve detailed information associated with a host object.
3.1.1 EPP <check> Command
The EPP <check> command is used to determine if a host object is known
to the server. In addition to the standard EPP command elements, the
<check> command MUST contain a <host:check> element that identifies
the host namespace and the location of the host schema. The
<host:check> element SHALL contain the following child elements:
- One or more <host:name> elements that contain the fully qualified
names of the host objects to be queried.
Example <check> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <check>
C: <host:check xmlns:host="urn:iana:xml:ns:host"
C: xsi:schemaLocation="urn:iana:xml:ns:host host.xsd">
C: <host:name>ns1.example.com</host:name>
C: <host:name>ns2.example.com</host:name>
C: <host:name>ns3.example.com</host:name>
C: </host:check>
C: </check>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <check> command has been processed successfully, the EPP
<resData> element MUST contain a child <host:chkData> element that
identifies the host namespace and the location of the host schema.
The <host:chkData> element SHALL contain the following child elements:
Hollenbeck Expires November 30, 2001 [Page 6]
Internet-Draft EPP Host Mapping May 30, 2001
- One or more <host:cd> elements that contain the fully qualified
names for the queried host objects and an "x" attribute whose value
identifies the object as either "+" for a known object or "-" for an
unknown object.
Example <check> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <host:chkData xmlns:host="urn:iana:xml:ns:host"
S: xsi:schemaLocation="urn:iana:xml:ns:host host.xsd">
S: <host:cd x="+">ns1.example.com</host:cd>
S: <host:cd x="-">ns2.example.com</host:cd>
S: <host:cd x="+">ns3.example.com</host:cd>
S: </host:chkData>
S: </resData>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <check> command can not be
processed for any reason.
3.1.2 EPP <info> Command
The EPP <info> command is used to retrieve information associated with
a host object. In addition to the standard EPP command elements, the
<info> command MUST contain a <host:info> element that identifies the
host namespace and the location of the host schema. The <host:info>
element SHALL contain the following child elements:
- A <host:name> element that contains the fully qualified name of the
host object for which information is requested.
Hollenbeck Expires November 30, 2001 [Page 7]
Internet-Draft EPP Host Mapping May 30, 2001
Example <info> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <info>
C: <host:info xmlns:host="urn:iana:xml:ns:host"
C: xsi:schemaLocation="urn:iana:xml:ns:host host.xsd">
C: <host:name>ns1.example.com</host:name>
C: </host:info>
C: </info>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When an <info> command has been processed successfully, the EPP
<resData> element MUST contain a child <host:infData> element that
identifies the host namespace and the location of the host schema.
The <host:infData> element SHALL contain the following child elements:
- A <host:name> element that contains the fully qualified name of the
host object to be queried.
- One or more <host:status> elements that describe the status of the
host object.
- Zero or more <host:addr> elements that contain the IP addresses
associated with the host object.
- A <host:clID> element that contains the identifier of the sponsoring
client.
- A <host:crID> element that contains the identifier of the client
that created the host object.
- A <host:crDate> element that contains the date and time of host
object creation.
- A <host:upID> element that contains the identifier of the client
that last updated the host object. This element MUST NOT be present
if the host object has never been modified.
- A <host:upDate> element that contains the date and time of the most
recent host object modification. This element MUST NOT be present if
Hollenbeck Expires November 30, 2001 [Page 8]
Internet-Draft EPP Host Mapping May 30, 2001
the host object has never been modified.
- A <host:trDate> element that contains the date and time of the most
recent successful host object transfer. This element MUST NOT be
provided if the host object has never been transferred. Note that
host objects MUST NOT be transferred directly; host objects MUST be
transferred implicitly when the host object's superordinate domain
object is transferred. Host objects that are subject to transfer when
transferring a domain object are listed in the response to an EPP
<info> command performed on the domain object.
Example <info> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <host:infData xmlns:host="urn:iana:xml:ns:host"
S: xsi:schemaLocation="urn:iana:xml:ns:host host.xsd">
S: <host:name>ns1.example.com</host:name>
S: <host:status s="linked"/>
S: <host:status s="clientUpdateProhibited"/>
S: <host:addr ip="v4">192.1.2.3</host:addr>
S: <host:addr ip="v6">1080:0:0:0:8:800:200C:417A</host:addr>
S: <host:clID>ClientY</host:clID>
S: <host:crID>ClientX</host:crID>
S: <host:crDate>1999-04-03T22:00:00.0Z</host:crDate>
S: <host:upID>ClientX</host:upID>
S: <host:upDate>1999-12-03T09:00:00.0Z</host:upDate>
S: <host:trDate>2000-04-08T09:00:00.0Z</host:trDate>
S: </host:infData>
S: </resData>
S: <unspec/>
S: <roid>NS1EXAMPLE1-VRSN</roid>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if an <info> command can not be
processed for any reason.
Hollenbeck Expires November 30, 2001 [Page 9]
Internet-Draft EPP Host Mapping May 30, 2001
3.1.3 EPP <transfer> Command
Transfer semantics do not directly apply to host objects, so there is
no mapping defined for the EPP <transfer> query command.
3.2 EPP Transform Commands
EPP provides three commands to transform host objects: <create> to
create an instance of a host object, <delete> to delete an instance of
a host object, and <update> to change information associated with a
host object. This document does not define host object mappings for
the EPP <renew> and <transfer> commands.
3.2.1 EPP <create> Command
The EPP <create> command provides a transform operation that allows a
client to create a host object. In addition to the standard EPP
command elements, the <create> command MUST contain a <host:create>
element that identifies the host namespace and the location of the
host schema. The <host:create> element SHALL contain the following
child elements:
- A <host:name> element that contains the fully qualified name of the
host object to be created.
- Zero or more <host:addr> elements that contain the IP addresses to
be associated with the host. Each element MAY contain an "ip"
attribute to identify the IP address format. Attribute value "v4" is
used to note IPv4 address format. Attribute value "v6" is used to
note IPv6 address format. If the "ip" attribute is not specified,
"v4" is the default attribute value.
If the host name exists in a TLD for which the server is not
authoritative, then IP addresses MUST NOT be provided for the host.
For example, if the server is authoritative for the ".com" TLD and the
name of the server is "ns1.example.com.au", then IP addresses MUST NOT
be provided. If the host name exists in a TLD for which the server is
authoritative, then the superordinate domain of the host MUST be known
to the server before the host object can be created.
Hollenbeck Expires November 30, 2001 [Page 10]
Internet-Draft EPP Host Mapping May 30, 2001
Example <create> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <create>
C: <host:create xmlns:host="urn:iana:xml:ns:host"
C: xsi:schemaLocation="urn:iana:xml:ns:host host.xsd">
C: <host:name>ns1.example.com</host:name>
C: <host:addr ip="v4">192.1.2.3</host:addr>
C: <host:addr ip="v4">198.1.2.3</host:addr>
C: <host:addr ip="v6">1080:0:0:0:8:800:200C:417A</host:addr>
C: <host:addr ip="v6">::FFFF:129.144.52.38</host:addr>
C: </host:create>
C: </create>
C: <unspec/>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When a <create> command has been processed successfully, the EPP
<resData> element MUST contain a child <host:creData> element that
identifies the host namespace and the location of the host schema.
The <host:creData> element SHALL contain the following child elements:
- A <host:name> element that contains the fully qualified name of the
host object.
Hollenbeck Expires November 30, 2001 [Page 11]
Internet-Draft EPP Host Mapping May 30, 2001
Example <create> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <host:creData xmlns:host="urn:iana:xml:ns:host"
S: xsi:schemaLocation="urn:iana:xml:ns:host host.xsd">
S: <host:name>ns1.example.com</host:name>
S: </host:creData>
S: </resData>
S: <unspec/>
S: <roid>NS1EXAMPLE1-VRSN</roid>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <create> command can not
be processed for any reason.
3.2.2 EPP <delete> Command
The EPP <delete> command provides a transform operation that allows a
client to delete a host object. In addition to the standard EPP
command elements, the <delete> command MUST contain a <host:delete>
element that identifies the host namespace and the location of the
host schema. The <host:delete> element SHALL contain the following
child elements:
- A <host:name> element that contains the fully qualified name of the
host object to be deleted.
A host name object MUST NOT be deleted if the host object is
associated with any other object. For example, if the host object is
associated with a domain object, the host object MUST NOT be deleted
until the existing association has been broken.
Hollenbeck Expires November 30, 2001 [Page 12]
Internet-Draft EPP Host Mapping May 30, 2001
Example <delete> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <delete>
C: <host:delete xmlns:host="urn:iana:xml:ns:host"
C: xsi:schemaLocation="urn:iana:xml:ns:host host.xsd">
C: <host:name>ns1.example.com</host:name>
C: </host:delete>
C: </delete>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <delete> command has been processed successfully, a server MUST
respond with an EPP response with no <resData> element.
Example <delete> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <delete> command can not
be processed for any reason.
3.2.3 EPP <renew> Command
Renewal semantics do not apply to host objects, so there is no mapping
defined for the EPP <renew> command.
Hollenbeck Expires November 30, 2001 [Page 13]
Internet-Draft EPP Host Mapping May 30, 2001
3.2.4 EPP <transfer> Command
Transfer semantics do not directly apply to host objects, so there is
no mapping defined for the EPP <transfer> command. Host objects are
subordinate to an existing superordinate domain object, and as such
they are subject to transfer when a domain object is transferred.
3.2.5 EPP <update> Command
The EPP <update> command provides a transform operation that allows a
client to modify the attributes of a host object. In addition to the
standard EPP command elements, the <update> command MUST contain a
<host:update> element that identifies the host namespace and the
location of the host schema. The <host:update> element SHALL contain
the following child elements:
- A <host:name> element that contains the fully qualified name of the
host object to be updated.
- An OPTIONAL <host:add> element that contains attribute values to be
added to the object.
- An OPTIONAL <host:rem> element that contains attribute values to be
removed from the object.
- An OPTIONAL <host:chg> element that contains object attribute values
to be changed.
At least one <host:add>, <host:rem>, or <host:chg> element MUST be
provided. The <host:add> and <host:rem> elements SHALL contain the
following child elements:
- One or more <host:addr> elements that contain IP addresses to be
associated with or removed from the host object. IP address
restrictions explained in the <create> command mapping apply here as
well.
- One or more <host:status> elements that contain status values to be
associated with or removed from the object. When specifying a value
to be removed, only the attribute value is significant; element text
is not required to match a value for removal.
A <host:chg> element SHALL contain the following child elements:
- A <host:name> element that contains a new fully qualified host name
by which the host object will be known.
Host name changes MAY require the addition or removal of IP addresses
Hollenbeck Expires November 30, 2001 [Page 14]
Internet-Draft EPP Host Mapping May 30, 2001
to be accepted by the server. If a new host name exists in a TLD for
which the server is not authoritative, then the host object MUST NOT
have any associated IP addresses. If a new host name exists in a TLD
for which the server is authoritative, then the host object MAY have
associated IP addresses.
Host name changes MAY have an impact on associated objects that refer
to the host object. A host name change SHOULD not require additional
updates of associated objects to preserve existing associations.
Example <update> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <update>
C: <host:update xmlns:host="urn:iana:xml:ns:host"
C: xsi:schemaLocation="urn:iana:xml:ns:host host.xsd">
C: <host:name>ns1.example.com</host:name>
C: <host:add>
C: <host:addr ip="v4">192.1.2.3</host:addr>
C: <host:status s="clientUpdateProhibited"/>
C: </host:add>
C: <host:rem>
C: <host:addr ip="v6">1080:0:0:0:8:800:200C:417A</host:addr>
C: </host:rem>
C: <host:chg>
C: <host:name>ns2.example.com</host:name>
C: </host:chg>
C: </host:update>
C: </update>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When an <update> command has been processed successfully, a server
MUST respond with an EPP response with no <resData> element.
Hollenbeck Expires November 30, 2001 [Page 15]
Internet-Draft EPP Host Mapping May 30, 2001
Example <update> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if an <update> command could
not be processed for any reason.
4. Formal Syntax
An EPP object mapping is specified in XML Schema notation. The formal
syntax presented here is a complete schema representation of the
object mapping suitable for automated validation of EPP XML instances.
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="urn:iana:xml:ns:host"
xmlns:host="urn:iana:xml:ns:host"
xmlns:epp="urn:iana:xml:ns:epp"
xmlns:eppcom="urn:iana:xml:ns:eppcom"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<!--
Import common element types.
-->
<import namespace="urn:iana:xml:ns:eppcom"
schemaLocation="eppcom.xsd"/>
<import namespace="urn:iana:xml:ns:epp"
schemaLocation="epp.xsd"/>
<annotation>
<documentation>
Extensible Provisioning Protocol v1.0
Hollenbeck Expires November 30, 2001 [Page 16]
Internet-Draft EPP Host Mapping May 30, 2001
host provisioning schema.
</documentation>
</annotation>
<!--
Types used within an EPP greeting.
-->
<element name="svc"/>
<!--
Child elements found in EPP commands.
-->
<element name="check" type="host:mNameType"/>
<element name="create" type="host:createType"/>
<element name="delete" type="host:sNameType"/>
<element name="info" type="host:sNameType"/>
<element name="update" type="host:updateType"/>
<!--
Child elements of the <create> command.
-->
<complexType name="createType">
<sequence>
<element name="name" type="eppcom:labelType"/>
<element name="addr" type="host:addrType"
minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="addrType">
<simpleContent>
<extension base="host:addrStringType">
<attribute name="ip" type="host:ipType"
use="optional" default="v4"/>
</extension>
</simpleContent>
</complexType>
<simpleType name="addrStringType">
<restriction base="token">
<minLength value="3"/>
<maxLength value="45"/>
</restriction>
</simpleType>
<simpleType name="ipType">
<restriction base="token">
<enumeration value="v4"/>
Hollenbeck Expires November 30, 2001 [Page 17]
Internet-Draft EPP Host Mapping May 30, 2001
<enumeration value="v6"/>
</restriction>
</simpleType>
<!--
Child elements of the <delete> and <info> commands.
-->
<complexType name="sNameType">
<sequence>
<element name="name" type="eppcom:labelType"/>
</sequence>
</complexType>
<!--
Child element of commands that accept multiple names.
-->
<complexType name="mNameType">
<sequence>
<element name="name" type="eppcom:labelType"
maxOccurs="unbounded"/>
</sequence>
</complexType>
<!--
Child elements of the <update> command.
-->
<complexType name="updateType">
<sequence>
<element name="name" type="eppcom:labelType"/>
<choice minOccurs="1" maxOccurs="3">
<element name="add" type="host:addRemType"
minOccurs="0"/>
<element name="rem" type="host:addRemType"
minOccurs="0"/>
<element name="chg" type="host:chgType"
minOccurs="0"/>
</choice>
</sequence>
</complexType>
<!--
Data elements that can be added or removed.
-->
<complexType name="addRemType">
<choice minOccurs="1" maxOccurs="2">
<element name="addr" type="host:addrType"
minOccurs="0" maxOccurs="unbounded"/>
<element name="status" type="host:statusType"
Hollenbeck Expires November 30, 2001 [Page 18]
Internet-Draft EPP Host Mapping May 30, 2001
minOccurs="0" maxOccurs="7"/>
</choice>
</complexType>
<!--
Data elements that can be changed.
-->
<complexType name="chgType">
<sequence>
<element name="name" type="eppcom:labelType"/>
</sequence>
</complexType>
<!--
Child response elements.
-->
<element name="chkData" type="host:chkDataType"/>
<element name="creData" type="host:creDataType"/>
<element name="infData" type="host:infDataType"/>
<!--
<check> response elements.
-->
<complexType name="chkDataType">
<sequence>
<element name="cd" type="host:checkedType"
maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="checkedType">
<simpleContent>
<extension base = "eppcom:labelType">
<attribute name="x" type="eppcom:checkType"
use="required"/>
</extension>
</simpleContent>
</complexType>
<!--
<create> response elements.
-->
<complexType name="creDataType">
<sequence>
<element name="name" type="eppcom:labelType"/>
</sequence>
</complexType>
Hollenbeck Expires November 30, 2001 [Page 19]
Internet-Draft EPP Host Mapping May 30, 2001
<!--
<info> response elements.
-->
<complexType name="infDataType">
<sequence>
<element name="name" type="eppcom:labelType"/>
<element name="status" type="host:statusType"
maxOccurs="7"/>
<element name="addr" type="host:addrType"
minOccurs="0" maxOccurs="unbounded"/>
<element name="clID" type="eppcom:clIDType"/>
<element name="crID" type="eppcom:clIDType"/>
<element name="crDate" type="dateTime"/>
<element name="upID" type="eppcom:clIDType"
minOccurs="0"/>
<element name="upDate" type="dateTime"
minOccurs="0"/>
<element name="trDate" type="dateTime"
minOccurs="0"/>
</sequence>
</complexType>
<!--
Status is a combination of attributes and an optional human-readable
message that may be expressed in languages other than English.
-->
<complexType name="statusType">
<simpleContent>
<extension base="normalizedString">
<attribute name="s" type="host:statusValueType"
use="required"/>
<attribute name="lang" type="language"
use="optional" default="en"/>
</extension>
</simpleContent>
</complexType>
<simpleType name="statusValueType">
<restriction base="token">
<enumeration value="clientDeleteProhibited"/>
<enumeration value="clientUpdateProhibited"/>
<enumeration value="linked"/>
<enumeration value="ok"/>
<enumeration value="pendingDelete"/>
<enumeration value="pendingTransfer"/>
<enumeration value="serverDeleteProhibited"/>
<enumeration value="serverUpdateProhibited"/>
</restriction>
Hollenbeck Expires November 30, 2001 [Page 20]
Internet-Draft EPP Host Mapping May 30, 2001
</simpleType>
<!--
End of schema.
-->
</schema>
Hollenbeck Expires November 30, 2001 [Page 21]
Internet-Draft EPP Host Mapping May 30, 2001
5. Internationalization Considerations
EPP is represented in XML, which provides native support for encoding
information using the double-byte Unicode character set and its more
compact representations including UTF-8. Compliant XML processors are
REQUIRED to understand both UTF-8 and raw Unicode character sets.
Though XML includes provisions to identify other character set
encodings through use of an "encoding" attribute in an <?xml?>
declaration, EPP use with character sets other than UTF-8 is NOT
RECOMMENDED.
All date-time values presented via EPP MUST be expressed in Universal
Coordinated Time using the Gregorian calendar. XML Schema allows use
of time zone identifiers to indicate offsets from the zero meridian,
but this option MUST NOT be used with EPP. Both extended and
truncated date and time forms defined in [ISO8601] MAY be used, though
a server SHOULD use one form or the other consistently.
This document requires host name syntax as specified in [RFC952] as
updated by [RFC1123]. These conformance requirements MAY change as a
result of progressing work in developing standards for
internationalized host names.
6. IANA Considerations
XML schemas require a URI for unique identification. Schemas MUST be
registered to ensure URI uniqueness, but the IETF does not currently
have a recommended repository for the registration of XML schemas.
This document uses URNs to describe XML namespaces and XML schemas
conforming to a registry mechanism described in [IANA-XML].
IANA SHOULD maintain a registry of XML namespace and schema URI
assignments. URI assignment requests SHOULD be reviewed by a
designated expert, and values SHOULD be assigned only as a result of
standards action taken by the IESG.
This document requests assignment of the following URIs:
urn:iana:xml:ns:host: The namespace URI for this EPP mapping.
urn:iana:xml:xmlschema:host: The schema URI for this EPP mapping.
7. Security Considerations
The object mapping described in this document does not provide any
security services beyond those specified by [EPP] and protocol layers
used by EPP.
Hollenbeck Expires November 30, 2001 [Page 22]
Internet-Draft EPP Host Mapping May 30, 2001
8. References
[EPP] S. Hollenbeck: "Extensible Provisioning Protocol", work in
progress.
[IANA-XML] M. Mealling: "The IANA XML Registry", work in progress.
[IANAa] http://www.iana.org/assignments/ipv4-address-space
[IANAb] http://www.isi.edu/in-notes/iana/assignments/ipv6-address-
space.txt
[ISO8601] ISO 8601:1988 (E): "Data elements and interchange formats -
Information interchange - Representation of dates and times - The
International Organization for Standardization".
[RFC791] J. Postel: "Internet Protocol", RFC 791, September 1981.
[RFC952] K. Harrenstien et al.: "DOD Internet Host Table
Specification", RFC 952, October 1985.
[RFC1123] R. Braden: "Requirements for Internet Hosts -- Application
and Support", RFC 1123, October 1989.
[RFC1884] R. Hinden, S. Deering: "IP Version 6 Addressing
Architecture", RFC 1884, December 1995.
[RFC1886] S. Thomson, C. Huitema: "DNS Extensions to support IP
version 6", RFC 1886, December 1995.
[RFC1918] Y. Rekhter et al.: "Address Allocation for Private
Internets", BCP 5, RFC 1918, February 1996.
[RFC2119] S. Bradner: "Key Words for Use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2874] M. Crawford, C. Huitema: "DNS Extensions to Support IPv6
Address Aggregation and Renumbering", RFC 2874, July 2000.
[XML] Editor T. Bray et al.: "Extensible Markup Language (XML) 1.0
(Second Edition)", W3C Recommendation 6 October 2000.
[XMLS-1] Editors H. Thompson et al.: "XML Schema Part 1: Structures",
W3C Recommendation 2 May 2001.
[XMLS-2] Editors P. Biron, A. Malhotra: "XML Schema Part 2:
Datatypes", W3C Recommendation 2 May 2001.
Hollenbeck Expires November 30, 2001 [Page 23]
Internet-Draft EPP Host Mapping May 30, 2001
9. Author's Address
Scott Hollenbeck
VeriSign Global Registry Services
21345 Ridgetop Circle
Dulles, VA 20166-6503
USA
shollenbeck@verisign.com
Hollenbeck Expires November 30, 2001 [Page 24]
Internet-Draft EPP Host Mapping May 30, 2001
A. Revisions From Previous Version
This is the initial provreg working group version.
Hollenbeck Expires November 30, 2001 [Page 25]
Internet-Draft EPP Host Mapping May 30, 2001
B. Full Copyright Statement
Copyright (C) The Internet Society 2001. All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published and
distributed, in whole or in part, without restriction of any kind,
provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of developing
Internet standards in which case the procedures for copyrights defined
in the Internet Standards process must be followed, or as required to
translate it into languages other than English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN
WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Hollenbeck Expires November 30, 2001 [Page 26]