Internet Engineering Task Force S. Hollenbeck
Internet-Draft VeriSign, Inc.
August 19, 2002 Expires: February 19, 2003
Extensible Provisioning Protocol Host Mapping
<draft-ietf-provreg-epp-host-05.txt>
Status of this Memo
This document is an Internet-Draft and is in full conformance with all
provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Task
Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress".
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Abstract
This document describes an Extensible Provisioning Protocol (EPP)
mapping for the provisioning and management of Internet host names
stored in a shared central repository. Specified in XML, the mapping
defines EPP command syntax and semantics as applied to host names.
Conventions Used In This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
In examples, "C:" represents lines sent by a protocol client and "S:"
represents lines returned by a protocol server. Indentation and white
space in examples is provided only to illustrate element relationships
and is not a REQUIRED feature of this protocol.
Hollenbeck Expires February 19, 2003 [Page 1]
Internet-Draft EPP Host Mapping August 19, 2002
Table of Contents
1. Introduction ................................................. 3
1.1 Relationship of Host Objects and Domain Objects ............. 3
2. Object Attributes ............................................ 4
2.1 Host Names .................................................. 4
2.2 Client Identifiers .......................................... 4
2.3 Status Values ............................................... 4
2.4 Dates and Times ............................................. 6
2.5 IP Addresses ................................................ 6
3. EPP Command Mapping .......................................... 7
3.1 EPP Query Commands .......................................... 7
3.1.1 EPP <check> Command ....................................... 7
3.1.2 EPP <info> Command ........................................ 9
3.1.3 EPP <transfer> Query Command .............................. 12
3.2 EPP Transform Commands ...................................... 12
3.2.1 EPP <create> Command ...................................... 13
3.2.2 EPP <delete> Command ...................................... 15
3.2.3 EPP <renew> Command ....................................... 16
3.2.4 EPP <transfer> Command .................................... 17
3.2.5 EPP <update> Command ...................................... 17
3.2.6 Offline Review of Requested Actions ....................... 19
4. Formal Syntax ................................................ 22
5. Internationalization Considerations .......................... 28
6. IANA Considerations .......................................... 28
7. Security Considerations ...................................... 29
8. Acknowledgements ............................................. 29
9. References ................................................... 30
10. Author's Address ............................................ 31
A. Revisions From Previous Version .............................. 32
B. Full Copyright Statement ..................................... 33
Hollenbeck Expires February 19, 2003 [Page 2]
Internet-Draft EPP Host Mapping August 19, 2002
1. Introduction
This document describes an Internet host name mapping for version 1.0
of the Extensible Provisioning Protocol (EPP). This mapping is
specified using the Extensible Markup Language (XML) 1.0 as described
in [XML] and XML Schema notation as described in [XMLS-1] and [XMLS-
2].
[EPP] provides a complete description of EPP command and response
structures. A thorough understanding of the base protocol
specification is necessary to understand the mapping described in this
document.
XML is case sensitive. Unless stated otherwise, XML specifications
and examples provided in this document MUST be interpreted in the
character case presented to develop a conforming implementation.
This document is being discussed on the "ietf-provreg" mailing list.
To join the list, send a message to <majordomo@cafax.se> with the
words "subscribe ietf-provreg" in the body of the message. There is a
web site for the list archives at http://www.cafax.se/ietf-provreg.
1.1 Relationship of Host Objects and Domain Objects
This document assumes that host name objects have a subordinate
relationship to a superordinate domain name object. For example, host
name "ns1.example.tld" has a subordinate relationship to domain name
"example.tld". EPP actions (such as object transfers) that do not
preserve this relationship MUST be explicitly disallowed.
A host name object can be created in a repository for which no
superordinate domain name object exists. For example, host name
"ns1.example.tld2" can be created in the "tld1" repository so that DNS
domains in "tld1" can be delegated to the host. Such hosts are
described as "external" hosts in this specification since the
management authority for these hosts is external to the repository in
which the host is being used for delegation purposes.
External host objects MUST be managed on a per-client basis. No
superordinate domain object exists in the repository, thus no single
client has management authority for the superordinate domain object.
Per-client management ensures that no single client can create an
instance of an external host object to the detriment of other clients
who might need to use the host for DNS delegation purposes.
Hollenbeck Expires February 19, 2003 [Page 3]
Internet-Draft EPP Host Mapping August 19, 2002
2. Object Attributes
An EPP host object has attributes and associated values that can be
viewed and modified by the sponsoring client or the server. This
section describes each attribute type in detail. The formal syntax
for the attribute values described here can be found in the "Formal
Syntax" section of this document and in the appropriate normative
references.
2.1 Host Names
The syntax for host names described in this document MUST conform to
[RFC952] as updated by [RFC1123]. These conformance requirements
might change in the future as a result of progressing work in
developing standards for internationalized host names.
2.2 Client Identifiers
All EPP clients are identified by a server-unique identifier. Client
identifiers conform to the "clIDType" syntax described in [EPP].
2.3 Status Values
A host object MUST always have at least one associated status value.
Status values MAY be set only by the client that sponsors a host
object and by the server on which the object resides. A client can
change the status of a host object using the EPP <update> command.
Each status value MAY be accompanied by a string of human-readable
text that describes the rationale for the status applied to the
object.
A client MUST NOT alter status values set by the server. A server MAY
alter or override status values set by a client subject to local
server policies.
Status values that can be added or removed by a client are prefixed
with "client". Corresponding status values that can be added or
removed by a server are prefixed with "server". Status values that do
not begin with either "client" or "server" are server-managed.
Status Value Descriptions:
- clientDeleteProhibited, serverDeleteProhibited
Requests to delete the object MUST be rejected.
- clientUpdateProhibited, serverUpdateProhibited
Hollenbeck Expires February 19, 2003 [Page 4]
Internet-Draft EPP Host Mapping August 19, 2002
Requests to update the object (other than to remove this status) MUST
be rejected.
- linked
The host object has at least one active association with another
object, such as a domain object. Servers SHOULD provide services to
determine existing object associations.
- ok
This is the normal status value for an object that has no pending
operations or prohibitions.
- pendingCreate, pendingDelete, pendingTransfer, pendingUpdate
A transform command has been processed for the object (or in the case
of a <transfer> command, for the host object's superordinate domain
object), but the action has not been completed by the server. Server
operators can delay action completion for a variety of reasons, such
as to allow for human review or third-party action. A transform
command that is processed, but whose requested action is pending, is
noted with response code 1001.
Transform commands MUST be rejected when a pendingCreate,
pendingDelete, pendingTransfer, or pendingUpdate status is set.
When the requested action has been completed, the pendingCreate,
pendingDelete, pendingTransfer, or pendingUpdate status value MUST be
removed. All clients involved in the transaction MUST be notified
using a service message that the action has been completed and that
the status of the object has changed.
"ok" status MAY only be combined with "linked" status.
"linked" status MAY be combined with any status.
"pendingDelete" status MUST NOT be combined with either
"clientDeleteProhibited" or "serverDeleteProhibited" status.
"pendingUpdate" status MUST NOT be combined with either
"clientUpdateProhibited" or "serverUpdateProhibited" status.
The pendingCreate, pendingDelete, pendingTransfer, and pendingUpdate
status values MUST NOT be combined with each other.
Other status combinations not expressly prohibited MAY be used.
Hollenbeck Expires February 19, 2003 [Page 5]
Internet-Draft EPP Host Mapping August 19, 2002
2.4 Dates and Times
Date and time attribute values MUST be represented in Universal
Coordinated Time (UTC) using the Gregorian calendar. The extended
date-time form using upper case "T" and "Z" characters defined in
[RFC3339] MUST be used to represent date-time values as XML Schema
does not support truncated date-time forms or lower case "T" and "Z"
characters.
2.5 IP Addresses
The syntax for IPv4 addresses described in this document MUST conform
to [RFC791]. The syntax for IPv6 addresses described in this document
MUST conform to [RFC2373]. Practical considerations for publishing
IPv6 address information in zone files are documented in [RFC1886],
[RFC2874], and [RFC3152]. A server MAY reject IP addresses that have
not been allocated for public use by IANA. When a host object is
provisioned for use as a DNS name server, IP addresses SHOULD be
required only as needed to generate DNS glue records.
Hollenbeck Expires February 19, 2003 [Page 6]
Internet-Draft EPP Host Mapping August 19, 2002
3. EPP Command Mapping
A detailed description of the EPP syntax and semantics can be found in
[EPP]. The command mappings described here are specifically for use
in provisioning and managing Internet host names via EPP.
3.1 EPP Query Commands
EPP provides two commands to retrieve host information: <check> to
determine if a host object can be provisioned within a repository, and
<info> to retrieve detailed information associated with a host object.
3.1.1 EPP <check> Command
The EPP <check> command is used to determine if an object can be
provisioned within a repository. It provides a hint that allows a
client to anticipate the success or failure of provisioning an object
using the <create> command as object provisioning requirements are
ultimately a matter of server policy.
In addition to the standard EPP command elements, the <check> command
MUST contain a <host:check> element that identifies the host namespace
and the location of the host schema. The <host:check> element
contains the following child elements:
- One or more <host:name> elements that contain the fully qualified
names of the host objects to be queried.
Hollenbeck Expires February 19, 2003 [Page 7]
Internet-Draft EPP Host Mapping August 19, 2002
Example <check> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
C: epp-1.0.xsd">
C: <command>
C: <check>
C: <host:check
C: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
C: host-1.0.xsd">
C: <host:name>ns1.example.tld</host:name>
C: <host:name>ns2.example.tld</host:name>
C: <host:name>ns3.example.tld</host:name>
C: </host:check>
C: </check>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When a <check> command has been processed successfully, the EPP
<resData> element MUST contain a child <host:chkData> element that
identifies the host namespace and the location of the host schema.
The <host:chkData> element contains one or more <host:cd> elements
that contain the following child elements:
- A <host:name> element that contains the fully qualified name of the
queried host object. This element MUST contain an "avail" attribute
whose value indicates object availability (can it be provisioned or
not) at the moment the <check> command was completed. A value of "1"
or "true" means that the object can be provisioned. A value of "0" or
"false" means that the object can not be provisioned.
- An OPTIONAL <host:reason> element that MAY be provided when an
object can not be provisioned. If present, this element contains
server-specific text to help explain why the object can not be
provisioned. This text MUST be represented in the response language
previously negotiated with the client; an OPTIONAL "lang" attribute
MAY be present to identify the language if the negotiated value is
something other than the default value of "en" (English).
Hollenbeck Expires February 19, 2003 [Page 8]
Internet-Draft EPP Host Mapping August 19, 2002
Example <check> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
S: epp-1.0.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <host:chkData
S: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
S: host-1.0.xsd">
S: <host:cd>
S: <host:name avail="1">ns1.example.tld</host:name>
S: </host:cd>
S: <host:cd>
S: <host:name avail="0">ns2.example2.tld</host:name>
S: <host:reason>In use</host:reason>
S: </host:cd>
S: <host:cd>
S: <host:name avail="1">ns3.example3.tld</host:name>
S: </host:cd>
S: </host:chkData>
S: </resData>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <check> command can not be
processed for any reason.
3.1.2 EPP <info> Command
The EPP <info> command is used to retrieve information associated with
a host object. In addition to the standard EPP command elements, the
<info> command MUST contain a <host:info> element that identifies the
host namespace and the location of the host schema. The <host:info>
element contains the following child elements:
- A <host:name> element that contains the fully qualified name of the
Hollenbeck Expires February 19, 2003 [Page 9]
Internet-Draft EPP Host Mapping August 19, 2002
host object for which information is requested.
Example <info> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
C: epp-1.0.xsd">
C: <command>
C: <info>
C: <host:info
C: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
C: host-1.0.xsd">
C: <host:name>ns1.example.tld</host:name>
C: </host:info>
C: </info>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When an <info> command has been processed successfully, the EPP
<resData> element MUST contain a child <host:infData> element that
identifies the host namespace and the location of the host schema.
The <host:infData> element contains the following child elements:
- A <host:name> element that contains the fully qualified name of the
host object.
- A <host:roid> element that contains the Repository Object IDentifier
assigned to the host object when the object was created.
- One or more <host:status> elements that describe the status of the
host object.
- Zero or more <host:addr> elements that contain the IP addresses
associated with the host object.
- A <host:clID> element that contains the identifier of the sponsoring
client.
- A <host:crID> element that contains the identifier of the client
that created the host object.
- A <host:crDate> element that contains the date and time of host
object creation.
Hollenbeck Expires February 19, 2003 [Page 10]
Internet-Draft EPP Host Mapping August 19, 2002
- A <host:upID> element that contains the identifier of the client
that last updated the host object. This element MUST NOT be present
if the host object has never been modified.
- A <host:upDate> element that contains the date and time of the most
recent host object modification. This element MUST NOT be present if
the host object has never been modified.
- A <host:trDate> element that contains the date and time of the most
recent successful host object transfer. This element MUST NOT be
provided if the host object has never been transferred. Note that
host objects MUST NOT be transferred directly; host objects MUST be
transferred implicitly when the host object's superordinate domain
object is transferred. Host objects that are subject to transfer when
transferring a domain object are listed in the response to an EPP
<info> command performed on the domain object.
Hollenbeck Expires February 19, 2003 [Page 11]
Internet-Draft EPP Host Mapping August 19, 2002
Example <info> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
S: epp-1.0.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <host:infData
S: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
S: host-1.0.xsd">
S: <host:name>ns1.example.tld</host:name>
S: <host:roid>NS1_EXAMPLE1-REP</host:roid>
S: <host:status s="linked"/>
S: <host:status s="clientUpdateProhibited"/>
S: <host:addr ip="v4">192.1.2.3</host:addr>
S: <host:addr ip="v4">198.1.2.3</host:addr>
S: <host:addr ip="v6">1080:0:0:0:8:800:200C:417A</host:addr>
S: <host:clID>ClientY</host:clID>
S: <host:crID>ClientX</host:crID>
S: <host:crDate>1999-04-03T22:00:00.0Z</host:crDate>
S: <host:upID>ClientX</host:upID>
S: <host:upDate>1999-12-03T09:00:00.0Z</host:upDate>
S: <host:trDate>2000-04-08T09:00:00.0Z</host:trDate>
S: </host:infData>
S: </resData>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if an <info> command can not be
processed for any reason.
3.1.3 EPP <transfer> Query Command
Transfer semantics do not directly apply to host objects, so there is
no mapping defined for the EPP <transfer> query command.
3.2 EPP Transform Commands
Hollenbeck Expires February 19, 2003 [Page 12]
Internet-Draft EPP Host Mapping August 19, 2002
EPP provides three commands to transform host objects: <create> to
create an instance of a host object, <delete> to delete an instance of
a host object, and <update> to change information associated with a
host object. This document does not define host object mappings for
the EPP <renew> and <transfer> commands.
Transform commands are typically processed and completed in real time.
Server operators MAY receive and process transform commands, but defer
completing the requested action if human or third-party review is
required before the requested action can be completed. In such
situations the server MUST return a 1001 response code to the client
to note that the command has been received and processed, but the
requested action is pending. The server MUST also manage the status
of the object that is the subject of the command to reflect the
initiation and completion of the requested action. Once the action
has been completed, all clients involved in the transaction MUST be
notified using a service message that the action has been completed
and that the status of the object has changed.
3.2.1 EPP <create> Command
The EPP <create> command provides a transform operation that allows a
client to create a host object. In addition to the standard EPP
command elements, the <create> command MUST contain a <host:create>
element that identifies the host namespace and the location of the
host schema. The <host:create> element contains the following child
elements:
- A <host:name> element that contains the fully qualified name of the
host object to be created.
- Zero or more <host:addr> elements that contain the IP addresses to
be associated with the host. Each element MAY contain an "ip"
attribute to identify the IP address format. Attribute value "v4" is
used to note IPv4 address format. Attribute value "v6" is used to
note IPv6 address format. If the "ip" attribute is not specified,
"v4" is the default attribute value.
Hosts can be provisioned for use as name servers in the Domain Name
System (DNS), described in [RFC1034] and [RFC1035]. Hosts provisioned
as name servers might be subject to server operator policies that
require or prohibit specification of IP addresses depending on the
name of the host and the name space in which the server will be used
as a name server. When provisioned for use as a name server, IP
addresses are REQUIRED only as needed to produce DNS glue records.
For example, if the server is authoritative for the "tld1" name space
and the name of the server is "ns1.example.tld2", the server is not
required to produce DNS glue records for the name server and IP
Hollenbeck Expires February 19, 2003 [Page 13]
Internet-Draft EPP Host Mapping August 19, 2002
addresses for the server are not required by the DNS.
If the host name exists in a name space for which the server is
authoritative, then the superordinate domain of the host MUST be known
to the server before the host object can be created.
Example <create> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
C: epp-1.0.xsd">
C: <command>
C: <create>
C: <host:create
C: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
C: host-1.0.xsd">
C: <host:name>ns1.example.tld</host:name>
C: <host:addr ip="v4">192.1.2.3</host:addr>
C: <host:addr ip="v4">198.1.2.3</host:addr>
C: <host:addr ip="v6">1080:0:0:0:8:800:200C:417A</host:addr>
C: </host:create>
C: </create>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When a <create> command has been processed successfully, the EPP
<resData> element MUST contain a child <host:creData> element that
identifies the host namespace and the location of the host schema.
The <host:creData> element contains the following child elements:
- A <host:name> element that contains the fully qualified name of the
host object.
- A <host:crDate> element that contains the date and time of host
object creation.
Hollenbeck Expires February 19, 2003 [Page 14]
Internet-Draft EPP Host Mapping August 19, 2002
Example <create> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
S: epp-1.0.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <host:creData
S: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
S: host-1.0.xsd">
S: <host:name>ns1.example.tld</host:name>
S: <host:crDate>1999-04-03T22:00:00.0Z</host:crDate>
S: </host:creData>
S: </resData>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <create> command can not
be processed for any reason.
3.2.2 EPP <delete> Command
The EPP <delete> command provides a transform operation that allows a
client to delete a host object. In addition to the standard EPP
command elements, the <delete> command MUST contain a <host:delete>
element that identifies the host namespace and the location of the
host schema. The <host:delete> element contains the following child
elements:
- A <host:name> element that contains the fully qualified name of the
host object to be deleted.
A host name object MUST NOT be deleted if the host object is
associated with any other object. For example, if the host object is
associated with a domain object, the host object MUST NOT be deleted
until the existing association has been broken.
Hollenbeck Expires February 19, 2003 [Page 15]
Internet-Draft EPP Host Mapping August 19, 2002
Example <delete> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
C: epp-1.0.xsd">
C: <command>
C: <delete>
C: <host:delete
C: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
C: host-1.0.xsd">
C: <host:name>ns1.example.tld</host:name>
C: </host:delete>
C: </delete>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When a <delete> command has been processed successfully, a server MUST
respond with an EPP response with no <resData> element.
Example <delete> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
S: epp-1.0.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if a <delete> command can not
be processed for any reason.
3.2.3 EPP <renew> Command
Renewal semantics do not apply to host objects, so there is no mapping
Hollenbeck Expires February 19, 2003 [Page 16]
Internet-Draft EPP Host Mapping August 19, 2002
defined for the EPP <renew> command.
3.2.4 EPP <transfer> Command
Transfer semantics do not directly apply to host objects, so there is
no mapping defined for the EPP <transfer> command. Host objects are
subordinate to an existing superordinate domain object, and as such
they are subject to transfer when a domain object is transferred.
3.2.5 EPP <update> Command
The EPP <update> command provides a transform operation that allows a
client to modify the attributes of a host object. In addition to the
standard EPP command elements, the <update> command MUST contain a
<host:update> element that identifies the host namespace and the
location of the host schema. The <host:update> element contains the
following child elements:
- A <host:name> element that contains the fully qualified name of the
host object to be updated.
- An OPTIONAL <host:add> element that contains attribute values to be
added to the object.
- An OPTIONAL <host:rem> element that contains attribute values to be
removed from the object.
- An OPTIONAL <host:chg> element that contains object attribute values
to be changed.
At least one <host:add>, <host:rem>, or <host:chg> element MUST be
provided. The <host:add> and <host:rem> elements contain the
following child elements:
- One or more <host:addr> elements that contain IP addresses to be
associated with or removed from the host object. IP address
restrictions described in the <create> command mapping apply here as
well.
- One or more <host:status> elements that contain status values to be
associated with or removed from the object. When specifying a value
to be removed, only the attribute value is significant; element text
is not required to match a value for removal.
A <host:chg> element contains the following child elements:
- A <host:name> element that contains a new fully qualified host name
by which the host object will be known.
Hollenbeck Expires February 19, 2003 [Page 17]
Internet-Draft EPP Host Mapping August 19, 2002
Host name changes MAY require the addition or removal of IP addresses
to be accepted by the server. IP address association MAY be subject
to server policies for provisioning hosts as name servers.
Host name changes MAY have an impact on associated objects that refer
to the host object. A host name change SHOULD NOT require additional
updates of associated objects to preserve existing associations.
Example <update> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
C: epp-1.0.xsd">
C: <command>
C: <update>
C: <host:update
C: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
C: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
C: host-1.0.xsd">
C: <host:name>ns1.example.tld</host:name>
C: <host:add>
C: <host:addr ip="v4">192.3.2.1</host:addr>
C: <host:status s="clientUpdateProhibited"/>
C: </host:add>
C: <host:rem>
C: <host:addr ip="v6">1080:0:0:0:8:800:200C:417A</host:addr>
C: </host:rem>
C: <host:chg>
C: <host:name>ns2.example.tld</host:name>
C: </host:chg>
C: </host:update>
C: </update>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When an <update> command has been processed successfully, a server
MUST respond with an EPP response with no <resData> element.
Hollenbeck Expires February 19, 2003 [Page 18]
Internet-Draft EPP Host Mapping August 19, 2002
Example <update> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
S: epp-1.0.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
An EPP error response MUST be returned if an <update> command could
not be processed for any reason.
3.2.6 Offline Review of Requested Actions
Commands are processed by a server in the order they are received from
a client. Though an immediate response confirming receipt and
processing of the command is produced by the server, a server operator
MAY perform an offline review of requested transform commands before
completing the requested action. In such situations the response from
the server MUST clearly note that the transform command has been
received and processed, but the requested action is pending. The
status of the corresponding object MUST clearly reflect processing of
the pending action. The server MUST notify the client when offline
processing of the action has been completed.
Examples describing a <create> command that requires offline review
are included here. Note the result code and message returned in
response to the <create> command.
Hollenbeck Expires February 19, 2003 [Page 19]
Internet-Draft EPP Host Mapping August 19, 2002
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
S: epp-1.0.xsd">
S: <response>
S: <result code="1001">
S: <msg>Command completed successfully; action pending</msg>
S: </result>
S: <resData>
S: <host:creData
S: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
S: host-1.0.xsd">
S: <host:name>ns1.example.tld</host:name>
S: <host:crDate>1999-04-03T22:00:00.0Z</host:crDate>
S: </host:creData>
S: </resData>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The status of the host object after returning this response MUST
include "pendingCreate". The server operator reviews the request
offline, and informs the client of the outcome of the review by
queuing a service message for retrieval via the <poll> command.
The service message MUST contain text in the <response>, <msgQ>, <msg>
element that describes the notification. In addition, the EPP
<resData> element MUST contain a child <host:panData> element that
identifies the host namespace and the location of the host schema.
The <host:panData> element contains the following child elements:
- A <host:name> element that contains the fully qualified name of the
host object. The <host:name> element contains a REQUIRED "paResult"
attribute. A positive boolean value indicates that the request has
been approved and completed. A negative boolean value indicates that
the request has been denied and the requested action has not been
taken.
- A <host:paTRID> element that contains the client transaction
identifier and server transaction identifier returned with the
original response to process the command. The client transaction
identifier is OPTIONAL and will only be returned if the client
Hollenbeck Expires February 19, 2003 [Page 20]
Internet-Draft EPP Host Mapping August 19, 2002
provided an identifier with the original <create> command.
- A <host:paDate> element that contains the date and time describing
when review of the requested action was completed.
Example "review completed" service message:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
S: epp-1.0.xsd">
S: <response>
S: <result code="1301">
S: <msg>Command completed successfully; ack to dequeue</msg>
S: </result>
S: <msgQ count="5" id="12345">
S: <qDate>1999-04-04T22:01:00.0Z</qDate>
S: <msg>Pending action completed successfully.</msg>
S: </msgQ>
S: <resData>
S: <host:panData
S: xmlns:host="urn:ietf:params:xml:ns:host-1.0"
S: xsi:schemaLocation="urn:ietf:params:xml:ns:host-1.0
S: host-1.0.xsd">
S: <host:name paResult="1">ns1.example.tld</host:name>
S: <host:paTRID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </host:paTRID>
S: <host:paDate>1999-04-04T22:00:00.0Z</host:paDate>
S: </host:panData>
S: </resData>
S: <trID>
S: <clTRID>BCD-23456</clTRID>
S: <svTRID>65432-WXY</svTRID>
S: </trID>
S: </response>
S:</epp>
Hollenbeck Expires February 19, 2003 [Page 21]
Internet-Draft EPP Host Mapping August 19, 2002
4. Formal Syntax
An EPP object mapping is specified in XML Schema notation. The formal
syntax presented here is a complete schema representation of the
object mapping suitable for automated validation of EPP XML instances.
The BEGIN and END tags are not part of the schema; they are used to
note the beginning and ending of the schema for URI registration
purposes.
BEGIN
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="urn:ietf:params:xml:ns:host-1.0"
xmlns:host="urn:ietf:params:xml:ns:host-1.0"
xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<!--
Import common element types.
-->
<import namespace="urn:ietf:params:xml:ns:eppcom-1.0"
schemaLocation="eppcom-1.0.xsd"/>
<import namespace="urn:ietf:params:xml:ns:epp-1.0"
schemaLocation="epp-1.0.xsd"/>
<annotation>
<documentation>
Extensible Provisioning Protocol v1.0
host provisioning schema.
</documentation>
</annotation>
<!--
Child elements found in EPP commands.
-->
<element name="check" type="host:mNameType"/>
<element name="create" type="host:createType"/>
<element name="delete" type="host:sNameType"/>
<element name="info" type="host:sNameType"/>
<element name="update" type="host:updateType"/>
<!--
Child elements of the <create> command.
-->
<complexType name="createType">
<sequence>
Hollenbeck Expires February 19, 2003 [Page 22]
Internet-Draft EPP Host Mapping August 19, 2002
<element name="name" type="eppcom:labelType"/>
<element name="addr" type="host:addrType"
minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="addrType">
<simpleContent>
<extension base="host:addrStringType">
<attribute name="ip" type="host:ipType"
default="v4"/>
</extension>
</simpleContent>
</complexType>
<simpleType name="addrStringType">
<restriction base="token">
<minLength value="3"/>
<maxLength value="45"/>
</restriction>
</simpleType>
<simpleType name="ipType">
<restriction base="token">
<enumeration value="v4"/>
<enumeration value="v6"/>
</restriction>
</simpleType>
<!--
Child elements of the <delete> and <info> commands.
-->
<complexType name="sNameType">
<sequence>
<element name="name" type="eppcom:labelType"/>
</sequence>
</complexType>
<!--
Child element of commands that accept multiple names.
-->
<complexType name="mNameType">
<sequence>
<element name="name" type="eppcom:labelType"
maxOccurs="unbounded"/>
</sequence>
</complexType>
Hollenbeck Expires February 19, 2003 [Page 23]
Internet-Draft EPP Host Mapping August 19, 2002
<!--
Child elements of the <update> command.
-->
<complexType name="updateType">
<sequence>
<element name="name" type="eppcom:labelType"/>
<element name="add" type="host:addRemType"
minOccurs="0"/>
<element name="rem" type="host:addRemType"
minOccurs="0"/>
<element name="chg" type="host:chgType"
minOccurs="0"/>
</sequence>
</complexType>
<!--
Data elements that can be added or removed.
-->
<complexType name="addRemType">
<sequence>
<element name="addr" type="host:addrType"
minOccurs="0" maxOccurs="unbounded"/>
<element name="status" type="host:statusType"
minOccurs="0" maxOccurs="7"/>
</sequence>
</complexType>
<!--
Data elements that can be changed.
-->
<complexType name="chgType">
<sequence>
<element name="name" type="eppcom:labelType"/>
</sequence>
</complexType>
<!--
Child response elements.
-->
<element name="chkData" type="host:chkDataType"/>
<element name="creData" type="host:creDataType"/>
<element name="infData" type="host:infDataType"/>
<element name="panData" type="host:panDataType"/>
<!--
<check> response elements.
-->
<complexType name="chkDataType">
Hollenbeck Expires February 19, 2003 [Page 24]
Internet-Draft EPP Host Mapping August 19, 2002
<sequence>
<element name="cd" type="host:checkType"
maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="checkType">
<sequence>
<element name="name" type="host:checkNameType"/>
<element name="reason" type="eppcom:reasonType"
minOccurs="0"/>
</sequence>
</complexType>
<complexType name="checkNameType">
<simpleContent>
<extension base="eppcom:labelType">
<attribute name="avail" type="boolean"
use="required"/>
</extension>
</simpleContent>
</complexType>
<!--
<create> response elements.
-->
<complexType name="creDataType">
<sequence>
<element name="name" type="eppcom:labelType"/>
<element name="crDate" type="dateTime"/>
</sequence>
</complexType>
<!--
<info> response elements.
-->
<complexType name="infDataType">
<sequence>
<element name="name" type="eppcom:labelType"/>
<element name="roid" type="eppcom:roidType"/>
<element name="status" type="host:statusType"
maxOccurs="6"/>
<element name="addr" type="host:addrType"
minOccurs="0" maxOccurs="unbounded"/>
<element name="clID" type="eppcom:clIDType"/>
<element name="crID" type="eppcom:clIDType"/>
<element name="crDate" type="dateTime"/>
<element name="upID" type="eppcom:clIDType"
Hollenbeck Expires February 19, 2003 [Page 25]
Internet-Draft EPP Host Mapping August 19, 2002
minOccurs="0"/>
<element name="upDate" type="dateTime"
minOccurs="0"/>
<element name="trDate" type="dateTime"
minOccurs="0"/>
</sequence>
</complexType>
<!--
Status is a combination of attributes and an optional human-readable
message that may be expressed in languages other than English.
-->
<complexType name="statusType">
<simpleContent>
<extension base="normalizedString">
<attribute name="s" type="host:statusValueType"
use="required"/>
<attribute name="lang" type="language"
default="en"/>
</extension>
</simpleContent>
</complexType>
<simpleType name="statusValueType">
<restriction base="token">
<enumeration value="clientDeleteProhibited"/>
<enumeration value="clientUpdateProhibited"/>
<enumeration value="linked"/>
<enumeration value="ok"/>
<enumeration value="pendingCreate"/>
<enumeration value="pendingDelete"/>
<enumeration value="pendingTransfer"/>
<enumeration value="pendingUpdate"/>
<enumeration value="serverDeleteProhibited"/>
<enumeration value="serverUpdateProhibited"/>
</restriction>
</simpleType>
<!--
Pending action notification response elements.
-->
<complexType name="panDataType">
<sequence>
<element name="name" type="host:paNameType"/>
<element name="paTRID" type="epp:trIDType"/>
<element name="paDate" type="dateTime"/>
</sequence>
</complexType>
Hollenbeck Expires February 19, 2003 [Page 26]
Internet-Draft EPP Host Mapping August 19, 2002
<complexType name="paNameType">
<simpleContent>
<extension base="eppcom:labelType">
<attribute name="paResult" type="boolean"
use="required"/>
</extension>
</simpleContent>
</complexType>
<!--
End of schema.
-->
</schema>
END
Hollenbeck Expires February 19, 2003 [Page 27]
Internet-Draft EPP Host Mapping August 19, 2002
5. Internationalization Considerations
EPP is represented in XML, which provides native support for encoding
information using the Unicode character set and its more compact
representations including UTF-8. Conformant XML processors recognize
both UTF-8 and UTF-16 [RFC2781]. Though XML includes provisions to
identify and use other character encodings through use of an
"encoding" attribute in an <?xml?> declaration, EPP use with character
encodings other than UTF-8 is NOT RECOMMENDED in environments where
parser encoding support incompatibility might have an impact on
interoperability.
All date-time values presented via EPP MUST be expressed in Universal
Coordinated Time using the Gregorian calendar. XML Schema allows use
of time zone identifiers to indicate offsets from the zero meridian,
but this option MUST NOT be used with EPP. The extended date-time
form using upper case "T" and "Z" characters defined in [RFC3339] MUST
be used to represent date-time values as XML Schema does not support
truncated date-time forms or lower case "T" and "Z" characters.
This document requires host name syntax as specified in [RFC952] as
updated by [RFC1123]. These conformance requirements might change as
a result of progressing work in developing standards for
internationalized host names.
6. IANA Considerations
This document uses URNs to describe XML namespaces and XML schemas
conforming to a registry mechanism described in [IETF-XML]. Two URI
assignments are requested.
Registration request for the host namespace:
URI: urn:ietf:params:xml:ns:host-1.0
Registrant Contact: See the "Author's Address" section of this
document.
XML: None. Namespace URIs do not represent an XML specification.
Registration request for the host XML schema:
URI: urn:ietf:params:xml:schema:host-1.0
Registrant Contact: See the "Author's Address" section of this
document.
XML: See the "Formal Syntax" section of this document.
Hollenbeck Expires February 19, 2003 [Page 28]
Internet-Draft EPP Host Mapping August 19, 2002
7. Security Considerations
The object mapping described in this document does not provide any
security services or introduce any additional considerations beyond
those described by [EPP] and protocol layers used by EPP.
8. Acknowledgements
This document was originally written as an individual submission
Internet-Draft. The provreg working group later adopted it as a
working group document and provided many invaluable comments and
suggested improvements. The author wishes to acknowledge the efforts
of WG chairs Edward Lewis and Jaap Akkerhuis for their process and
editorial contributions.
Specific suggestions that have been incorporated into this document
were provided by Chris Bason, Jordyn Buchanan, Dave Crocker, Anthony
Eden, Sheer El-Showk, Klaus Malorny, Dan Manley, Michael Mealling,
Patrick Mevzek, and Rick Wesson.
Hollenbeck Expires February 19, 2003 [Page 29]
Internet-Draft EPP Host Mapping August 19, 2002
9. References
Normative References:
[EPP] S. Hollenbeck: "Extensible Provisioning Protocol", work in
progress.
[IETF-XML] M. Mealling: "The IETF XML Registry", work in progress.
[RFC791] J. Postel: "Internet Protocol", RFC 791, September 1981.
[RFC952] K. Harrenstien et al.: "DOD Internet Host Table
Specification", RFC 952, October 1985.
[RFC1034] P. Mockapetris: "DOMAIN NAMES - CONCEPTS AND FACILITIES",
RFC 1034, STD 13, November 1987.
[RFC1035] P. Mockapetris: "DOMAIN NAMES - IMPLEMENTATION AND
SPECIFICATION", RFC 1035, STD 13, November 1987.
[RFC1123] R. Braden: "Requirements for Internet Hosts -- Application
and Support", RFC 1123, October 1989.
[RFC2119] S. Bradner: "Key Words for Use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2373] R. Hinden, S. Deering: "IP Version 6 Addressing
Architecture", RFC 2373, July 1998.
[RFC3339] G. Klyne, C. Newman: "Date and Time on the Internet:
Timestamps", RFC 3339, July 2002.
[XML] Editor T. Bray et al.: "Extensible Markup Language (XML) 1.0
(Second Edition)", W3C Recommendation 6 October 2000.
[XMLS-1] Editors H. Thompson et al.: "XML Schema Part 1: Structures",
W3C Recommendation 2 May 2001.
[XMLS-2] Editors P. Biron, A. Malhotra: "XML Schema Part 2:
Datatypes", W3C Recommendation 2 May 2001.
Hollenbeck Expires February 19, 2003 [Page 30]
Internet-Draft EPP Host Mapping August 19, 2002
Informative References:
[RFC1886] S. Thomson, C. Huitema: "DNS Extensions to support IP
version 6", RFC 1886, December 1995.
[RFC2781] P. Hoffman, F. Yergeau, "UTF-16, an encoding of ISO 10646",
RFC 2781, February 2000.
[RFC2874] M. Crawford, C. Huitema: "DNS Extensions to Support IPv6
Address Aggregation and Renumbering", RFC 2874, July 2000.
[RFC3152] R. Bush: "Delegation of IP6.ARPA", RFC 3152, BCP 49, August
2001.
10. Author's Address
Scott Hollenbeck
VeriSign Global Registry Services
21345 Ridgetop Circle
Dulles, VA 20166-6503
USA
shollenbeck@verisign.com
Hollenbeck Expires February 19, 2003 [Page 31]
Internet-Draft EPP Host Mapping August 19, 2002
A. Revisions From Previous Version
(Note to RFC editor: please remove this section completely before
publication as an RFC.)
-04 to -05 (IETF last call updates):
Replaced "nominal" with "normal" in the text.
Reworked status values and descriptions in section 2.3 to incorporate
values for operations that require offline human involvement.
Reworded use of the term "available" in section 3.1.1.
Replaced a normative reference to an IPv6 addressing architecture I-D
with a reference to RFC 2373.
Updated date-time reference to use new RFC 3339 and noted XML Schema
restriction on upper case "T" and "Z" characters.
Made XML references normative.
Added reference to RFC 2781.
Hollenbeck Expires February 19, 2003 [Page 32]
Internet-Draft EPP Host Mapping August 19, 2002
B. Full Copyright Statement
Copyright (C) The Internet Society 2002. All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published and
distributed, in whole or in part, without restriction of any kind,
provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of developing
Internet standards in which case the procedures for copyrights defined
in the Internet Standards process must be followed, or as required to
translate it into languages other than English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN
WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Hollenbeck Expires February 19, 2003 [Page 33]