Network Working Group                                         F. Adrangi
Internet-Draft                                                     Intel
Expires: October 3, 2005                                         A. Lior
                                                     Bridgewater Systems
                                                             J. Korhonen
                                                             Teliasonera
                                                             J. Loughney
                                                                   Nokia
                                                              April 2005


                        Chargeable User Identity
                draft-ietf-radext-chargeable-user-id-05

Status of this Memo

   This document is an Internet-Draft and is subject to all provisions
   of Section 3 of RFC 3667.  By submitting this Internet-Draft, each
   author represents that any applicable patent or other IPR claims of
   which he or she is aware have been or will be disclosed, and any of
   which he or she become aware will be disclosed, in accordance with
   RFC 3668.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on October 3, 2005.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   This document describes a new RADIUS attribute, Chargeable-User-



Adrangi, et al.          Expires October 3, 2005                [Page 1]


Internet-Draft          Chargeable User Identity              April 2005


   Identity.  This attribute can be used by a home network to identify a
   user for the purpose of roaming transactions that occur outside of
   the home network.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.1   Motivation . . . . . . . . . . . . . . . . . . . . . . . .  4
     1.2   Terminology  . . . . . . . . . . . . . . . . . . . . . . .  5
   2.  Operation  . . . . . . . . . . . . . . . . . . . . . . . . . .  5
     2.1   Chargeable-User-Identity (CUI) Attribute . . . . . . . . .  5
     2.2   CUI Attribute  . . . . . . . . . . . . . . . . . . . . . .  7
   3.  Attribute Table  . . . . . . . . . . . . . . . . . . . . . . .  7
   4.  Diameter Consideration . . . . . . . . . . . . . . . . . . . .  7
   5.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . .  8
   6.  Security considerations  . . . . . . . . . . . . . . . . . . .  8
   7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . .  8
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . .  8
     8.1   Normative references . . . . . . . . . . . . . . . . . . .  8
     8.2   Informative references . . . . . . . . . . . . . . . . . .  9
       Authors' Addresses . . . . . . . . . . . . . . . . . . . . . .  9
       Intellectual Property and Copyright Statements . . . . . . . . 11





























Adrangi, et al.          Expires October 3, 2005                [Page 2]


Internet-Draft          Chargeable User Identity              April 2005


1.  Introduction

   Some authentication methods, including EAP-PEAP,  EAP-TTLS, EAP-SIM
   and EAP-AKA, can hide the true identity of the user from RADIUS
   servers outside of the user's home network.  In these methods, the
   User-Name(1) attribute contains an anonymous identity (e.g.,
   @example.com) sufficient to route the RADIUS packets to the home
   network but otherwise insufficient to identify the user.  While this
   mechanism is good practice in some circumstances, there are problems
   if local and intermediate networks require a surrogate identity to
   bind the current session.

   This document introduces an attribute that serves as an alias or
   handle (hereafter, it is called Chargeable-User-Identity) to the real
   user's identity.  Chargeable-User-Identity can be used outside the
   home network in scenarios that traditionaly relied on User-Name(1) to
   correlate a session to a user.

   For example, local or intermediate networks may limit the number of
   simultaneous sessions for specific users; they may require a
   Chargeable-User-Identity in order to demonstrate willingness to pay
   or otherwise limit the potential for fraud.

   This implies that a unique identity provided by the home network
   should be able to be conveyed to all parties involved in the roaming
   transaction for correlating the authentication and accounting
   packets.

   Providing a unique identity, Chargeable-User-Identity (CUI), to
   intermediaries, is necessary to fulfill certain business needs.  This
   should not undermine the anonymity of the user.  The mechanism
   provided by this draft allows the home operator to meet these
   business requirements by providing a temporary identity representing
   the user and at the same time protecting the anonymity of the user.

   When the home network assigns a value to the CUI, it asserts that
   this value represents a user in the home network.  The assertion
   should be temporary.  Long enough to be useful for the external
   applications and not too long such that it can be used to identify
   the user.

   Several organizations, including WISPr, GSMA, 3GPP, Wi-Fi Alliance,
   IRAP, have been studying mechanisms to provide roaming services,
   using RADIUS.  Missing elements include mechanisms for billing and
   fraud prevention.

   The CUI attribute is intended to close operational loopholes in
   RADIUS specifications that have impacted roaming solutions



Adrangi, et al.          Expires October 3, 2005                [Page 3]


Internet-Draft          Chargeable User Identity              April 2005


   negatively.  Use of the CUI is geared toward EAP methods supporting
   privacy (such as PEAP and EAP-TTLS), which are, for the most part,
   recent deployments.  A chargeable identity reflecting the user
   profile by the home network is needed in such roaming scenarios.

1.1  Motivation

   Some other mechanisms have been proposed in place of the CUI
   attribute.  These mechanisms are insufficient or cause other
   problems.  It has been suggested that standard RADIUS Class(25) or
   User-Name(1) attributes could be used to indicate the CUI.  However,
   in a complex global roaming environment where there could be one or
   more intermediaries between the NAS and the home RADIUS server, the
   use of aforementioned attributes could lead to problems as described
   below.

      - On the use of RADIUS Class(25) attribute:

      [RFC2865] states: "This Attribute is available to be sent by the
      server to the client in an Access-Accept packet and SHOULD be sent
      unmodified by the client to the accounting server as part of the
      Accounting-Request packet if accounting is supported.  The client
      MUST NOT interpret the attribute locally."  So RADIUS clients or
      intermediaries MUST NOT interpret the Class(25) attribute, which
      precludes determining whether it contains a CUI.  Additionally,
      there could be multiple class attributes in a RADIUS packet, and
      since the contents of Class(25) attribute is not to be interpreted
      by clients, this makes it hard to the entities outside home
      network to determine which one contains the CUI.

      - On the use of RADIUS User-Name(1) attribute:

      The User-Name(1) attribute included in the Access-Request packet
      may be used for the purpose of routing the Access-Request packet,
      and in the process may be rewritten by intermediaries.  As a
      result, a RADIUS server receiving an Access-Request packet relayed
      by a proxy cannot assume that the User-Name(1) attribute remained
      unmodified.
      On the other hand, rewriting of a User-Name(1) attribute sent
      within an Access-Accept packet occurs more rarely, since a Proxy-
      State(33) attribute can be used to route the Access-Accept packet
      without parsing the User-Name(1) attribute.  As a result, a RADIUS
      server cannot assume that a proxy stripping routing information
      from a User-Name(1) attribute within an Access-Request packet will
      add this information to a User-Name(1) attribute included within
      an Access-Accept packet.  The result is that when a User-Name(1)
      attribute is sent in an Access-Accept packet it is possible that
      the Access-Request packet and Accounting-Request packets will



Adrangi, et al.          Expires October 3, 2005                [Page 4]


Internet-Draft          Chargeable User Identity              April 2005


      follow different paths.  Where this outcome is undesirable, the
      RADIUS client should use the original User-Name(1) in accounting
      packets.  Therefore, another mechanism is required to convey a CUI
      within an Access-Accept packet to the RADIUS client, so that the
      CUI can be included in the accounting packets.

   The CUI attribute provides a solution to the above problems and
   avoids overloading RADIUS User-Name(1) attribute or changing the
   usage of existing RADIUS Class(25) attribute.  The CUI therefore
   provides a standard approach to billing and fraud prevention when EAP
   methods supporting privacy are used.  It does not solve all related
   problems, but does provide for billing and fraud prevention.

1.2  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

      3GPP - Third Generation Partnership Program
      AAA - Authentication, Authorization and Accounting
      CUI - Chargeable-User-Identity
      GSMA - GSM Association
      IRAP -  International Roaming Access Protocols Program
      NAS - Network Access Server
      PEAP - Protected Extensible Authentication Protocol
      TTLS - Tunneled Transport Layer Security
      WISPr - Wireless ISP Roaming
      WPA -  Wi-Fi Protected Access

2.  Operation

   This document assumes that the RADIUS protocol operates as specified
   in [RFC2865], [RFC2866], dynamic authorization as specified in
   [RFC3576], and the Diameter protocol as specified in [RFC3588].

2.1  Chargeable-User-Identity (CUI) Attribute

   The CUI attribute serves as an alias to the user's real identity,
   representing a chargeable identity as defined and provided by the
   home network as a supplemental or alternative information to User-
   Name(1).  Typically the CUI represents the identity of the actual
   user but it may also indicate other chargeable identities such as a
   group of users.  RADIUS clients (proxy or NAS) outside the home
   network MUST NOT modify the CUI attribute.

   The RADIUS server (a RADIUS proxy, home RADIUS server) may include
   the CUI attribute in the Access-Accept packet destined to a roaming



Adrangi, et al.          Expires October 3, 2005                [Page 5]


Internet-Draft          Chargeable User Identity              April 2005


   partner.  The CUI support by RADIUS infrastructure is driven by the
   business requirements between roaming entities.  Therefore a RADIUS
   server supporting this specification may choose not to send the CUI
   in response to an Access-Request packet from a given NAS, even if the
   NAS has indicated that it supports CUI.

   If an Access-Accept packet without the CUI attribute was received by
   a RADIUS client that requested the CUI attribute, then the Access-
   Accept packet MAY be treated as an Access-Reject.

   If the CUI was included in an Access-Accept packet, RADIUS clients
   supporting the CUI attribute MUST ensure that the CUI attribute
   appears in the RADIUS Accounting-Request (Start, Interim, and Stop).

   RFC 2865 includes the following statements about behaviors of RADIUS
   client and server with respect to unsupported attributes:

      - "A RADIUS client MAY ignore Attributes with an unknown Type."
      - "A RADIUS server MAY ignore Attributes with an unknown Type."

   Therefore, RADIUS clients or servers that do not support the CUI may
   ignore the attribute.

   A RADIUS client requesting the CUI attribute in an Access-Accept
   packet MUST include within the Access-Request packet a CUI attribute.
   For the initial authentication, the CUI attribute will include a
   single NUL character (referred to as a nul CUI).  And, during re-
   authentication, the CUI attribute will include a previously received
   CUI value (referred as a non-nul CUI value) in the Access-Accept.

   Upon receiving a non-nul CUI value in an Access-Request the home
   RADIUS server MAY verify that the value of CUI matches the CUI from
   the previous Access-Accept.  If the verification fails, then the
   RADIUS server SHOULD respond with an Access-Reject message.

   If a home RADIUS server that supports the CUI attribute receives an
   Access-Request packet containing a CUI (set to nul or otherwise), it
   MUST include the CUI attribute in the Access-Accept packet.
   Otherwise, if the Access-Request packet does not contain a CUI, the
   home RADIUS server SHOULD NOT include the CUI attribute in the
   Access-Accept packet.  The Access-Request may be sent either in the
   initial authentication or during re-authentication.

   A NAS that requested the CUI during re-authentication by including
   the CUI in the Access-Request, will receive the CUI in the Access-
   Accept.  The NAS MUST include the value of that CUI in all Accounting
   Messages.




Adrangi, et al.          Expires October 3, 2005                [Page 6]


Internet-Draft          Chargeable User Identity              April 2005


2.2  CUI Attribute

   A summary of the RADIUS CUI Attribute is given below.


      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |     Type      |    Length     | String...
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Type: TBD for Chargeable-User-Identity.

   Length: >= 3

   String:

      The string identifies the CUI of the end-user and is of type
      UTF8String.  This string value is a reference to a particular
      user.  The format and content of the string value is determined by
      the Home RADIUS server.  The binding lifetime of the reference to
      the user is determined based on business agreements.  For example,
      the lifetime can be set to one billing period.  RADIUS entities
      other than the Home RADIUS server MUST treat the CUI content as an
      opaque token, and SHOULD NOT perform operations on its content
      other than a binary equality comparison test, between two
      instances of CUI.  In cases where the attribute is used to
      indicate the NAS support for the CUI, the string value contains a
      nul character.

3.  Attribute Table

   The following table provides a guide to which attribute(s) may be
   found in which kinds of packets, and in what quantity.

   Request Accept Reject Challenge Accounting  #  Attribute
                                      Request
     0-1     0-1     0       0        0-1       TBD   Chargeable-User-identity


   [Note 1] If the Access-Accept packet contains CUI then the NAS MUST
   include the CUI in Accounting Requests (Start, Interim and Stop)
   packets.

4.  Diameter Consideration

   Diameter needs to define an identical attribute with the same Type
   value.  The CUI should be available as part of the NASREQ
   application.



Adrangi, et al.          Expires October 3, 2005                [Page 7]


Internet-Draft          Chargeable User Identity              April 2005


5.  IANA Considerations

   This document uses the RADIUS [RFC2865] namespace, see
   "http://www.iana.org/assignments/radius-types".  This document
   instructs IANA to assign a new RADIUS attribute number for the CUI
   attribute.

   CUI             TBA

6.  Security considerations

   It is strongly recommended that the CUI format used is such that the
   real user identity is not revealed.  Furthermore, where a reference
   is used to a real user identity, the binding lifetime of that
   reference to the real user be kept as short as possible.

   The RADIUS entities (RADIUS proxies and clients) outside the home
   netowrk MUST NOT modify the CUI.  However, there is no way to detect
   or prevent this.

   If the NAS includes CUI in an Access-Request packet, a man-in-the-
   middle may remove it.  This will cause the Access-Accept packet to
   not include a CUI attribute, which may cause the NAS to reject the
   session.  To prevent such a DoS attack, the NAS SHOULD include a
   Message-Authenticator(80) attribute within Access-Request packets
   containing a CUI attribute.

7.  Acknowledgements

   The authors would like to thank Jari Arkko, Bernard Aboba, David
   Nelson, Barney Wolff, Blair Bullock, Sami Ala-Luukko, Lothar Reith,
   David Mariblanca, Eugene Chang, Greg Weber, and Mark Grayson, for
   their feedback and guidance.

8.  References

8.1  Normative references

   [RFC2865]  Rigney, C., Willens, S., Rubens, A., and W. Simpson,
              "Remote Authentication Dial In User Service (RADIUS)",
              RFC 2865, June 2000.

   [RFC2866]  Rigney, C., "RADIUS Accounting", RFC 2866, June 2000.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [rfc2486bis]



Adrangi, et al.          Expires October 3, 2005                [Page 8]


Internet-Draft          Chargeable User Identity              April 2005


              Aboba, B., Beadles, M., Arkko, J., and P. Eronen, "The
              Network Access Identifier",
              draft-arkko-roamops-rfc2486bis-02 (work in progress),
              July 2004.

8.2  Informative references

   [RFC3576]  Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B.
              Aboba, "Dynamic Authorization Extensions to Remote
              Authentication Dial In User Service (RADIUS)", RFC 3576,
              July 2003.

   [RFC3588]  Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J.
              Arkko, "Diameter Base Protocol", RFC 3588, September 2003.


Authors' Addresses

   Farid Adrangi
   Intel Corporation
   2111 N.E. 25th Avenue
   Hillsboro, OR  97124
   USA

   Phone: +1 503-712-1791
   Email: farid.adrangi@intel.com


   Avi Lior
   Bridgewater Systems Corporation
   303 Terry Fox Drive
   Ottawa, Ontario  K2K 3J1
   Canada

   Phone: +1 613-591-9104
   Email: avi@bridgewatersystems.com


   Jouni Korhonen
   Teliasonera Corporation
   P.O.Box 970
   FIN-00051,   Sonera
   Finland

   Phone: +358405344455
   Email: jouni.korhonen@teliasonera.com





Adrangi, et al.          Expires October 3, 2005                [Page 9]


Internet-Draft          Chargeable User Identity              April 2005


   John Loughney
   Nokia
   Itamerenkatu 11-13
   FIN-00180,   Helsinki
   Finland

   Phone: +358504836342
   Email: john.loughney@nokia.com











































Adrangi, et al.          Expires October 3, 2005               [Page 10]


Internet-Draft          Chargeable User Identity              April 2005


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2005).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




Adrangi, et al.          Expires October 3, 2005               [Page 11]