REGEXT Working Group                                       S. Hollenbeck
Internet-Draft                                             Verisign Labs
Intended status: Standards Track                            May 31, 2019
Expires: December 2, 2019


   Federated Authentication for the Registration Data Access Protocol
                      (RDAP) using OpenID Connect
                    draft-ietf-regext-rdap-openid-02

Abstract

   The Registration Data Access Protocol (RDAP) provides "RESTful" web
   services to retrieve registration metadata from domain name and
   regional internet registries.  RDAP allows a server to make access
   control decisions based on client identity, and as such it includes
   support for client identification features provided by the Hypertext
   Transfer Protocol (HTTP).  Identification methods that require
   clients to obtain and manage credentials from every RDAP server
   operator present management challenges for both clients and servers,
   whereas a federated authentication system would make it easier to
   operate and use RDAP without the need to maintain server-specific
   client credentials.  This document describes a federated
   authentication system for RDAP based on OpenID Connect.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on December 2, 2019.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.





Hollenbeck              Expires December 2, 2019                [Page 1]


Internet-Draft           OpenID Connect for RDAP                May 2019


   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Problem Statement . . . . . . . . . . . . . . . . . . . .   3
     1.2.  Proposal  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Conventions Used in This Document . . . . . . . . . . . . . .   4
   3.  Federated Authentication for RDAP . . . . . . . . . . . . . .   4
     3.1.  RDAP and OpenID Connect . . . . . . . . . . . . . . . . .   5
       3.1.1.  Terminology . . . . . . . . . . . . . . . . . . . . .   5
       3.1.2.  Overview  . . . . . . . . . . . . . . . . . . . . . .   5
       3.1.3.  RDAP Authentication and Authorization Steps . . . . .   6
         3.1.3.1.  Provider Discovery  . . . . . . . . . . . . . . .   6
         3.1.3.2.  Authentication Request  . . . . . . . . . . . . .   6
         3.1.3.3.  End-User Authorization  . . . . . . . . . . . . .   7
         3.1.3.4.  Authorization Response and Validation . . . . . .   7
         3.1.3.5.  Token Processing  . . . . . . . . . . . . . . . .   7
         3.1.3.6.  Delivery of User Information  . . . . . . . . . .   7
       3.1.4.  Specialized Claims for RDAP . . . . . . . . . . . . .   8
         3.1.4.1.  Stated Purpose  . . . . . . . . . . . . . . . . .   8
         3.1.4.2.  Do Not Track  . . . . . . . . . . . . . . . . . .   9
   4.  Protocol Parameters . . . . . . . . . . . . . . . . . . . . .   9
     4.1.  Client Authentication Request and Response  . . . . . . .  10
     4.2.  Token Request and Response  . . . . . . . . . . . . . . .  10
     4.3.  Token Refresh and Revocation  . . . . . . . . . . . . . .  11
     4.4.  Token Exchange  . . . . . . . . . . . . . . . . . . . . .  14
     4.5.  Parameter Processing  . . . . . . . . . . . . . . . . . .  14
     4.6.  RDAP Conformance  . . . . . . . . . . . . . . . . . . . .  15
   5.  Clients with Limited User Interfaces  . . . . . . . . . . . .  15
     5.1.  OAuth 2.0 Device Flow . . . . . . . . . . . . . . . . . .  16
     5.2.  Manual Token Management . . . . . . . . . . . . . . . . .  16
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  17
     6.1.  RDAP Extensions Registry  . . . . . . . . . . . . . . . .  17
     6.2.  JSON Web Token Claims Registry  . . . . . . . . . . . . .  17
     6.3.  RDAP Query Purpose Registry . . . . . . . . . . . . . . .  17
   7.  Implementation Status . . . . . . . . . . . . . . . . . . . .  20
     7.1.  Verisign Labs . . . . . . . . . . . . . . . . . . . . . .  21
     7.2.  Viagenie  . . . . . . . . . . . . . . . . . . . . . . . .  21
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  22



Hollenbeck              Expires December 2, 2019                [Page 2]


Internet-Draft           OpenID Connect for RDAP                May 2019


     8.1.  Authentication and Access Control . . . . . . . . . . . .  22
   9.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  22
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  22
     10.1.  Normative References . . . . . . . . . . . . . . . . . .  22
     10.2.  Informative References . . . . . . . . . . . . . . . . .  24
     10.3.  URIs . . . . . . . . . . . . . . . . . . . . . . . . . .  25
   Appendix A.  Change Log . . . . . . . . . . . . . . . . . . . . .  25
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  25

1.  Introduction

   The Registration Data Access Protocol (RDAP) provides "RESTful" web
   services to retrieve registration metadata from domain name and
   regional internet registries.  RDAP allows a server to make access
   control decisions based on client identity, and as such it includes
   support for client identification features provided by the Hypertext
   Transfer Protocol (HTTP) [RFC7230].

   RDAP is specified in multiple documents, including "HTTP Usage in the
   Registration Data Access Protocol (RDAP)" [RFC7480], "Security
   Services for the Registration Data Access Protocol (RDAP)" [RFC7481],
   "Registration Data Access Protocol Query Format" [RFC7482], and "JSON
   Responses for the Registration Data Access Protocol (RDAP)"
   [RFC7483].  RFC 7481 describes client identification and
   authentication services that can be used with RDAP, but it does not
   specify how any of these services can (or should) be used with RDAP.

1.1.  Problem Statement

   The traditional "user name and password" authentication method does
   not scale well in the RDAP ecosystem.  Assuming that all domain name
   and address registries will eventually provide RDAP service, it is
   impractical and inefficient for users to secure login credentials
   from the hundreds of different server operators.  Authentication
   methods based on user names and passwords do not provide information
   that describes the user in sufficient detail (while protecting the
   personal privacy of the user) for server operators to make fine-
   grained access control decisions based on the user's identity.  The
   authentication system used for RDAP needs to address all of these
   needs.

1.2.  Proposal

   A basic level of RDAP service can be provided to users who possess an
   identifier issued by a recognized provider who is able to
   authenticate and validate the user.  The identifiers issued by social
   media services, for example, can be used.  Users who require higher
   levels of service (and who are willing to share more information



Hollenbeck              Expires December 2, 2019                [Page 3]


Internet-Draft           OpenID Connect for RDAP                May 2019


   about them self to gain access to that service) can secure
   identifiers from specialized providers who are or will be able to
   provide more detailed information about the user.  Server operators
   can then make access control decisions based on the identification
   information provided by the user.

   A federated authentication system would make it easier to operate and
   use RDAP by re-using existing identifiers to provide a basic level of
   access.  It can also provide the ability to collect additional user
   identification information, and that information can be shared with
   the consent of the user.  This document describes a federated
   authentication system for RDAP based on OpenID Connect [OIDC] that
   meets all of these needs.

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

3.  Federated Authentication for RDAP

   RDAP itself does not include native security services.  Instead, RDAP
   relies on features that are available in other protocol layers to
   provide needed security services including access control,
   authentication, authorization, availability, data confidentiality,
   data integrity, and identification.  A description of each of these
   security services can be found in "Internet Security Glossary,
   Version 2" [RFC4949].  This document focuses on a federated
   authentication system for RDAP that provides services for
   authentication, authorization, and identification, allowing a server
   operator to make access control decisions.  Section 3 of RFC 7481
   [RFC7481] describes general considerations for RDAP access control,
   authentication, and authorization.

   The traditional client-server authentication model requires clients
   to maintain distinct credentials for every RDAP server.  This
   situation can become unwieldy as the number of RDAP servers
   increases.  Federated authentication mechanisms allow clients to use
   one credential to access multiple RDAP servers and reduce client
   credential management complexity.








Hollenbeck              Expires December 2, 2019                [Page 4]


Internet-Draft           OpenID Connect for RDAP                May 2019


3.1.  RDAP and OpenID Connect

   OpenID Connect 1.0 [OIDCC] is a decentralized, single sign-on (SSO)
   federated authentication system that allows users to access multiple
   web resources with one identifier instead of having to create
   multiple server-specific identifiers.  Users acquire identifiers from
   OpenID Providers, or OPs.  Relying Parties, or RPs, are applications
   (such as RDAP) that outsource their user authentication function to
   an OP.  OpenID Connect is built on top of the authorization framework
   provided by the OAuth 2.0 [RFC6749] protocol.

   The OAuth authorization framework describes a method for users to
   access protected web resources without having to hand out their
   credentials.  Instead, clients are issued Access Tokens by
   authorization servers with the permission of the resource owners.
   Using OpenID Connect and OAuth, multiple RDAP servers can form a
   federation and clients can access any server in the federation by
   providing one credential registered with any OP in that federation.
   The OAuth authorization framework is designed for use with HTTP and
   thus can be used with RDAP.

3.1.1.  Terminology

   This document uses the terms "client" and "server" defined by RDAP
   [RFC7480].  An RDAP client performs the role of an OpenID Connect
   Core [OIDCC] Entity or End-User.  An RDAP server performs the role of
   an OpenID Connect Core Relying Party (RP).  Additional terms from
   Section 1.2 of the OpenID Connect Core specification are incorporated
   by reference.

3.1.2.  Overview

   At a high level, RDAP authentication of a browser-based client using
   OpenID Connect requires completion of the following steps:

   1.  An RDAP client (acting as an OpenID End-User) sends an HTTP (or
       HTTPS) query containing OAuth 2.0 request parameters to an RDAP
       server.
   2.  The RDAP server (acting as an OpenID Relying Party (RP)) prepares
       an Authentication Request containing the desired request
       parameters.
   3.  The RDAP server sends the RDAP client and Authentication Request
       to an Authorization Server operated by an OpenID Provider (OP)
       using an HTTP redirect.
   4.  The Authorization Server authenticates the RDAP Client.
   5.  The Authorization Server obtains RDAP Client consent/
       authorization.




Hollenbeck              Expires December 2, 2019                [Page 5]


Internet-Draft           OpenID Connect for RDAP                May 2019


   6.  The Authorization Server sends the RDAP Client back to the RDAP
       server with an Authorization Code using an HTTP redirect.
   7.  The RDAP server requests a response using the Authorization Code
       at the Token Endpoint.
   8.  The RDAP server receives a response that contains an ID Token and
       Access Token in the response body.
   9.  The RDAP server validates the ID Token and retrieves the RDAP
       client's Subject Identifier.

   The RDAP server can then make identification, authorization, and
   access control decisions based on local policies, the ID Token
   received from the OP, and the received Claims.  Note that OpenID
   Connect describes different process flows for other types of clients,
   such as script-based or command line clients.

3.1.3.  RDAP Authentication and Authorization Steps

   End-Users MUST possess an identifier (an OpenID) issued by an OP to
   use OpenID Connect with RDAP.  An OP MUST include support for the
   claims described in Section 3.1.4 to provide additional information
   needed for RDAP End-User authorization.  OpenID Connect requires RPs
   to register with OPs to use OpenID Connect services for an End-User.
   That process is described by the "OpenID Connect Dynamic Client
   Registration" protocol [OIDCR].

3.1.3.1.  Provider Discovery

   An RDAP server/RP needs to receive an identifier from an End-User
   that can be used to discover the End-User's OP.  That process is
   required and is documented in the "OpenID Connect Discovery" protocol
   [OIDCD].

3.1.3.2.  Authentication Request

   Once the OP is known, an RP MUST form an Authentication Request and
   send it to the OP as described in Section 3 of the OpenID Connect
   Core protocol [OIDCC].  The authentication path followed
   (authorization, implicit, or hybrid) will depend on the
   Authentication Request response_type set by the RP.  The remainder of
   the processing steps described here assume that the Authorization
   Code Flow is being used by setting "response_type=code" in the
   Authentication Request.

   The benefits of using the Authorization Code Flow for authenticating
   a human user are described in Section 3.1 of the OpenID Connect Core
   protocol.  The Implicit Flow is more commonly used by clients
   implemented in a web browser using a scripting language; it is
   described in Section 3.2 of the OpenID Connect Core protocol.  The



Hollenbeck              Expires December 2, 2019                [Page 6]


Internet-Draft           OpenID Connect for RDAP                May 2019


   Hybrid Flow (described in Section 3.3 of the OpenID Connect Core
   protocol) combines elements of the Authorization and Implicit Flows
   by returning some tokens from the Authorization Endpoint and others
   from the Token Endpoint.

   An Authentication Request can contain several parameters.  REQUIRED
   parameters are specified in Section 3.1.2.1 of the OpenID Connect
   Core protocol [OIDCC].  Other parameters MAY be included.

   The OP receives the Authentication Request and attempts to validate
   it as described in Section 3.1.2.2 of the OpenID Connect Core
   protocol [OIDCC].  If the request is valid, the OP attempts to
   authenticate the End-User as described in Section 3.1.2.3 of the
   OpenID Connect Core protocol [OIDCC].  The OP returns an error
   response if the request is not valid or if any error is encountered.

3.1.3.3.  End-User Authorization

   After the End-User is authenticated, the OP MUST obtain authorization
   information from the End-User before releasing information to the
   RDAP Server/RP.  This process is described in Section 3.1.2.4 of the
   OpenID Connect Core protocol [OIDCC].

3.1.3.4.  Authorization Response and Validation

   After the End-User is authenticated, the OP will send a response to
   the RP that describes the result of the authorization process in the
   form of an Authorization Grant.  The RP MUST validate the response.
   This process is described in Sections 3.1.2.5 - 3.1.2.7 of the OpenID
   Connect Core protocol [OIDCC].

3.1.3.5.  Token Processing

   The RP sends a Token Request using the Authorization Grant to a Token
   Endpoint to obtain a Token Response containing an Access Token, ID
   Token, and an OPTIONAL Refresh Token.  The RP MUST validate the Token
   Response.  This process is described in Section 3.1.3 of the OpenID
   Connect Core protocol [OIDCC].

3.1.3.6.  Delivery of User Information

   The set of Claims can be retrieved by sending a request to a UserInfo
   Endpoint using the Access Token.  The Claims MAY be returned in the
   ID Token.  The process of retrieving Claims from a UserInfo Endpoint
   is described in Section 5.3 of the OpenID Connect Core protocol
   [OIDCC].





Hollenbeck              Expires December 2, 2019                [Page 7]


Internet-Draft           OpenID Connect for RDAP                May 2019


   OpenID Connect specified a set of standard Claims in Section 5.1.
   Additional Claims for RDAP are described in Section 3.1.4.

3.1.4.  Specialized Claims for RDAP

   OpenID Connect claims are pieces of information used to make
   assertions about an entity.  Section 5 of the OpenID Connect Core
   protocol [OIDCC] describes a set of standard claims that can be used
   to identify a person.  Section 5.1.2 notes that additional claims MAY
   be used, and it describes a method to create them.

3.1.4.1.  Stated Purpose

   There are communities of RDAP users and operators who wish to make
   and validate claims about a user's "need to know" when it comes to
   requesting access to a resource.  For example, a law enforcement
   agent or a trademark attorney may wish to be able to assert that they
   have a legal right to access a protected resource, and a server
   operator will need to be able to receive and validate that claim.
   These needs can be met by defining and using an additional "purpose"
   claim.

   The "purpose" claim identifies the purpose for which access to a
   protected resource is being requested.  Use of the "purpose" claim is
   OPTIONAL; processing of this claim is subject to server acceptance of
   the purpose and successful authentication of the End-User.
   Unrecognized purpose values MUST be ignored and the associated query
   MUST be processed as if the unrecognized purpose value was not
   present at all.

   The "purpose" value is a case-sensitive string containing a
   StringOrURI value as specified in Section 2 of the JSON Web Token
   (JWT) specification ([RFC7519]).  An example:

   {"purpose" : "domainNameControl"}

   Purpose values are themselves registered with IANA.  Each entry in
   the registry contains the following fields:

   Value: the purpose string value being registered.  Value strings can
   contain upper case characters from "A" to "Z", lower case ASCII
   characters from "a" to "z", and the underscore ("_") character.
   Value strings contain at least one character and no more than 64
   characters.

   Description: a one- or two-sentence description of the meaning of the
   purpose value, how it might be used, and/or how it should be
   interpreted by clients and servers.



Hollenbeck              Expires December 2, 2019                [Page 8]


Internet-Draft           OpenID Connect for RDAP                May 2019


   This registry is operated under the "Specification Required" policy
   defined in RFC 5226 ([RFC5226]).  The set of initial values used to
   populate the registry as described in Section 6.3 are taken from the
   final report [1] produced by the Expert Working Group on gTLD
   Directory Services chartered by the Internet Corporation for Assigned
   Names and Numbers (ICANN).

3.1.4.2.  Do Not Track

   There are also communities of RDAP users and operators who wish to
   make and validate claims about a user's wish to not have their
   queries logged, tracked, or recorded.  For example, a law enforcement
   agent may wish to be able to assert that their queries are part of a
   criminal investigation and should not be tracked due to a risk of
   query exposure compromising the investigation, and a server operator
   will need to be able to receive and validate that claim.  These needs
   can be met by defining and using an additional "do not track" claim.

   The "do not track" ("dnt") claim can be used to identify an End-User
   that is authorized to perform queries without the End-User's
   association with those queries being logged, tracked, or recorded by
   the server.  Client use of the "dnt" claim is OPTIONAL.  Server
   operators MUST NOT log, track, or record any association of the query
   and the End-User's identity if the End-User is successfully
   identified and authorized, the "dnt" claim is present, and the value
   of the claim is "true".

   The "dnt" value is represented as a JSON boolean literal.  An
   example:

   {"dnt" : true}

   No special query tracking processing is required if this claim is not
   present or if the value of the claim is "false".  Use of this claim
   MUST be limited to End-Users who are granted "do not track"
   priviliges in accordance with service policies and regulations.
   Specification of these policies and regulations is beyond the scope
   of this document.

4.  Protocol Parameters

   This specification adds the following protocol parameters to RDAP:

   1.  A query parameter to request authentication for a specific end-
       user identity.
   2.  A path segment to request an ID Token and an Access Token for a
       specific end-user identity.




Hollenbeck              Expires December 2, 2019                [Page 9]


Internet-Draft           OpenID Connect for RDAP                May 2019


   3.  A query parameter to deliver an ID Token and an Access Token for
       use with an RDAP query.

4.1.  Client Authentication Request and Response

   Client authentication is requested by adding a query component to an
   RDAP request URI using the syntax described in Section 3.4 of RFC
   3986 [RFC3986].  The query used to request client authentication is
   represented as a "key=value" pair using a key value of "id" and a
   value component that contains the client identifier issued by an OP.
   An example:

   https://example.com/rdap/domain/example.com?id=user.idp.example

   The response to an authenticated query MUST use the response
   structures specified in RFC 7483 [RFC7483].  Information that the
   end-user is not authorized to receive MUST be omitted from the
   response.

4.2.  Token Request and Response

   Clients MAY send a request to an RDAP server to authenticate an end-
   user and return an ID Token and an Access Token from an OP that can
   be then be passed to the RP/RDAP server to authenticate and process
   subsequent queries.  Identity provider authentication is requested
   using a "tokens" path segment and a query parameter with key value of
   "id" and a value component that contains the client identifier issued
   by an OP.  An example:

   https://example.com/rdap/tokens?id=user.idp.example

   In addition to any core RDAP response elements, the response to this
   query MUST contain four name-value pairs, in any order, representing
   the returned ID Token and Access Token.  The ID Token is represented
   using a key value of "id_token".  The Access Token is represented
   using a key value of "access_token".  The access token type is
   represented using a key value of "token_type" and a value of "bearer"
   as described in Sections 4.2.2 and 7.1 of RFC 6749 [RFC6749].  The
   lifetime of the access token is represented using a key value of
   "expires_in" and a numerical value that describes the lifetime in
   seconds of the access token as described in Section 4.2.2 of RFC 6749
   [RFC6749].  The token values returned in the RDAP server response
   MUST be Base64url encoded as described in RFCs 7515 [RFC7515] and
   7519 [RFC7519].







Hollenbeck              Expires December 2, 2019               [Page 10]


Internet-Draft           OpenID Connect for RDAP                May 2019


   An example (the encoded tokens have been abbreviated for clarity):

           {
            "access_token" : "eyJ0...NiJ9",
            "id_token" : "eyJ0...EjXk",
            "token_type" : "bearer",
            "expires_in" : "3600"
           }

                                 Figure 1

   An RDAP server that processes this type of query MUST determine if
   the identifier is associated with an OP that is recognized and
   supported by the server.  Servers MUST reject queries that include an
   identifier associated with an unsupported OP with an HTTP 501 (Not
   Implemented) response.  An RDAP server that receives a query
   containing an identifier associated with a recognized OP MUST perform
   the steps required to authenticate the user with the OP using a
   browser or browser-like client and return encoded tokens to the
   client.  Note that tokens are typically valid for a limited period of
   time and new tokens will be required when an existing token's
   validity period has expired.

   The tokens can then be passed to the server for use with an RDAP
   query by passing the encoded ID Token as a query parameter with a key
   value of "id_token" and the encoded Access Token in an HTTP Bearer
   authorization header [RFC6750].  An example (the encoded tokens have
   been abbreviated and the URI split across multiple lines for
   clarity):

   https://example.com/rdap/domain/example.com?id_token=eyJ0...EjXk

   Authorization: Bearer eyJ0...NiJ9

   The response to an authenticated query MUST use the response
   structures specified in RFC 7483 [RFC7483].  Information that the
   end-user is not authorized to receive MUST be omitted from the
   response.

4.3.  Token Refresh and Revocation

   An access token can be refreshed as described in Section 12 of the
   OpenID Connect Core protocol [OIDCC] and Section 6 of OAuth 2.0
   [RFC6749].  Clients can take advantage of this functionality if it is
   supported by the OP and accepted by the RDAP server.

   A refresh token is requested using a "tokens" path segment and two
   query parameters.  The first query parameter includes a key value of



Hollenbeck              Expires December 2, 2019               [Page 11]


Internet-Draft           OpenID Connect for RDAP                May 2019


   "id" and a value component that contains the client identifier issued
   by an OP.  The second query parameter includes a key value of
   "refresh" and a value component of "true".  A value component of
   "false" MUST be processed to return a result that is consistent with
   not including a "refresh" parameter at all as described in
   Section 4.2.  An example using "refresh=true":

   https://example.com/rdap/tokens?id=user.idp.example
   &refresh=true

   The response to this query MUST contain all of the response elements
   described in Section 4.2.  In addition, the response MUST contain a
   name-value pair that represents a refresh token.  The name-value pair
   includes a key value of "refresh_token" and a Base64url-encoded value
   that represents the refresh token.

   Example refresh token request response (the encoded tokens have been
   abbreviated for clarity):

             {
              "access_token" : "eyJ0...NiJ9",
              "id_token" : "eyJ0...EjXk",
              "token_type" : "bearer",
              "expires_in" : "3600",
              "refresh_token" : "eyJ0...c8da"
             }

                                 Figure 2

   Once acquired, a refresh token can be used to refresh an access
   token.  An access token is refreshed using a "tokens" path segment
   and two query parameters.  The first query parameter includes a key
   value of "id" and a value component that contains the client
   identifier issued by an OP.  The second query parameter includes a
   key value of "refresh_token" and a Base64url-encoded value that
   represents the refresh token.  An example:

   https://example.com/rdap/tokens?id=user.idp.example
   &refresh_token=eyJ0...f3jE

   In addition to any core RDAP response elements, the response to this
   query MUST contain four name-value pairs, in any order, representing
   a returned Refresh Token and Access Token.  The Refresh Token is
   represented using a key value of "refresh_token".  The Access Token
   is represented using a key value of "access_token".  The access token
   type is represented using a key value of "token_type" and a value of
   "bearer" as described in Sections 4.2.2 and 7.1 of RFC 6749
   [RFC6749].  The lifetime of the access token is represented using a



Hollenbeck              Expires December 2, 2019               [Page 12]


Internet-Draft           OpenID Connect for RDAP                May 2019


   key value of "expires_in" and a numerical value that describes the
   lifetime in seconds of the access token as described in Section 4.2.2
   of RFC 6749 [RFC6749].  The token values returned in the RDAP server
   response MUST be Base64url encoded as described in RFCs 7515
   [RFC7515] and 7519 [RFC7519].

   Example access token refresh response (the encoded tokens have been
   abbreviated for clarity):

             {
              "access_token" : "0dac...13b0",
              "refresh_token" : "f735...d30c",
              "token_type" : "bearer",
              "expires_in" : "3600"
             }

                                 Figure 3

   Access and refresh tokens can be revoked as described in RFC 7009
   [RFC7009] by sending a request to an RDAP server that contains a
   "tokens/revoke" path segment and two query parameters.  The first
   query parameter includes a key value of "id" and a value component
   that contains the client identifier issued by an OP.  The second
   query parameter includes a key value of "token" and a Base64url-
   encoded value that represents either the current refresh token or the
   associated access token.  An example:

   https://example.com/rdap/tokens/revoke?id=user.idp.example
   &token=f735...d30c

   Note that this command will revoke both access and refresh tokens at
   the same time.  In addition to any core RDAP response elements, the
   response to this query MUST contain a description of the result of
   processing the revocation request within the RDAP "notices" data
   structure.

   Example token revocation success:

             "notices" :
             [
               {
                 "title" : "Token Revocation Result",
                 "description" : "Token revocation succeeded.",
               }
             ],
             "lang" : "en-US"

                                 Figure 4



Hollenbeck              Expires December 2, 2019               [Page 13]


Internet-Draft           OpenID Connect for RDAP                May 2019


   Example token revocation failure:

             "notices" :
             [
               {
                 "title" : "Token Revocation Result",
                 "description" : "Token revocation failed.",
               }
             ],
             "errorCode" : 400,
             "lang" : "en-US"

                                 Figure 5

4.4.  Token Exchange

   ID tokens include an audience parameter that contains the OAuth 2.0
   client_id of the RP as an audience value.  In some operational
   scenarios (such as a client that is providing a proxy service), an RP
   can receive tokens with an audience value that does not include the
   RP's client_id.  These tokens might not be trusted by the RP, and the
   RP might refuse to accept the tokens.  This situation can be remedied
   by having the RP exchange these tokens with the OP for a set of
   trusted tokens that reset the audience parameter.  This token
   exchange protocol is described in RFC TBD
   [I-D.ietf-oauth-token-exchange].

4.5.  Parameter Processing

   Unrecognized query parameters MUST be ignored.  An RDAP request that
   does not include an "id" query component MUST be processed as an
   unauthenticated query.  An RDAP server that processes an
   authenticated query MUST determine if the identifier is associated
   with an OP that is recognized and supported by the server.  Servers
   MUST reject queries that include an identifier associated with an
   unsupported OP with an HTTP 501 (Not Implemented) response.  An RDAP
   server that receives a query containing an identifier associated with
   a recognized OP MUST perform the steps required to authenticate the
   user with the OP, process the query, and return an RDAP response that
   is appropriate for the end user's level of authorization and access.

   An RDAP server that receives a query containing tokens associated
   with a recognized OP and authenticated end user MUST process the
   query and return an RDAP response that is appropriate for the end
   user's level of authorization and access.  Errors based on processing
   either the ID Token or the Access Token MUST be signaled with an
   appropriate HTTP status code as described in Section 3.1 of RFC 6750
   [RFC6750].



Hollenbeck              Expires December 2, 2019               [Page 14]


Internet-Draft           OpenID Connect for RDAP                May 2019


   On receiving a query containing tokens, the RDAP server MUST validate
   the ID Token.  It can do this independently of the OP, because the ID
   Token is a JWT that contains all the data necessary for validation.
   The Access Token, however, is an opaque value, and can only be
   validated by sending a request using it to the UserInfo Endpoint and
   confirming that a successful response is received.  This is different
   from the OpenID Connect Authorization Code and Implicit flows, where
   the Access Token can be validated against the at_hash claim from the
   ID Token.  With a query containing tokens, the Access Token might not
   validate against the at_hash claim because the Access Token may have
   been refreshed since the ID Token was issued.

   An RDAP server that processes requests without needing the UserInfo
   claims does not need to retrieve the claims merely in order to
   validate the Access Token.  Similarly, an RDAP server that has cached
   the UserInfo claims for an end user, in accordance with the HTTP
   headers of a previous UserInfo Endpoint response, does not need to
   retrieve those claims again in order to revalidate the Access Token.

4.6.  RDAP Conformance

   RDAP responses that contain values described in this document MUST
   indicate conformance with this specification by including an
   rdapConformance ([RFC7483]) value of "rdap_openidc_level_0".  The
   information needed to register this value in the RDAP Extensions
   Registry is described in Section 6.1.

   Example rdapConformance structure with extension specified:

             "rdapConformance" :
             [
               "rdap_level_0",
               "rdap_openidc_level_0"
             ]

                                 Figure 6

5.  Clients with Limited User Interfaces

   The flow described in Section 3.1.3 requires a client to interact
   with a server using a web browser.  This will not work well in
   situations where the client is automated or an end-user is using a
   command line user interface such as curl [2] or wget [3].  There are
   multiple ways to address this limitation using a web browser on a
   second device.  Two are described here.






Hollenbeck              Expires December 2, 2019               [Page 15]


Internet-Draft           OpenID Connect for RDAP                May 2019


5.1.  OAuth 2.0 Device Flow

   The "OAuth 2.0 Device Flow for Browserless and Input Constrained
   Devices" [I-D.ietf-oauth-device-flow] provides one method to request
   user authorization from devices that have an Internet connection, but
   lack a suitable browser for a more traditional OAuth flow.  This
   method requires a client to use a second device (such as a smart
   telephone) that has access to a web browser for entry of a code
   sequence that is presented on the constrained device.

5.2.  Manual Token Management

   A second method of requesting user authorization from a constrained
   device is possible by producing and managing tokens manually as
   follows:

   1.  Authenticate with the OP as described in Section 4.2 using a
       browser or browser-like client.
   2.  Store the returned ID Token and Access Token locally.
   3.  Send a request to the content provider/RP along with the ID Token
       and Access Token received from the OP.

   The Access Token MAY be passed to the RP in an HTTP "Authorization"
   header [RFC7235] or as a query parameter.  The Access Token MUST be
   specified using the "Bearer" authentication scheme [RFC6750] if it is
   passed in an "Authorization" header.  The ID Token MUST be passed to
   the RP as a query parameter.

   Here are two examples using the curl and wget utilities.  Start by
   authenticating with the OP:

   https://example.com/rdap/tokens?id=user.idp.example

   Save the token information and pass it to the RP along with the URI
   representing the RDAP query.  Using curl (encoded tokens have been
   abbreviated for clarity:

   curl -H "Authorization: Bearer eyJ0...NiJ9"\
   -k https://example.com/rdap/domain/example.com\
   ?id_token=eyJ0...EjXk

   curl -k https://example.com/rdap/domain/example.com\
   ?id_token=eyJ0...EjXk&access_token=eyJ0...NiJ9

   Using wget:

   wget --header="Authorization: Bearer eyJ0...NiJ9"\
   https://example.com/rdap/domain/example.com\



Hollenbeck              Expires December 2, 2019               [Page 16]


Internet-Draft           OpenID Connect for RDAP                May 2019


   ?id_token=eyJ0...EjXk

   wget https://example.com/rdap/domain/example.com\
   ?id_token=eyJ0...EjXk&access_token=eyJ0...NiJ9

   Refresh tokens can be useful to automated or command line clients who
   wish to continue a session without explicitly re-authenticating an
   end user.  See Section 4.3 for more information.

6.  IANA Considerations

6.1.  RDAP Extensions Registry

   IANA is requested to register the following value in the RDAP
   Extensions Registry:

      Extension identifier: rdap_openidc
      Registry operator: Any
      Published specification: This document.
      Contact: IESG <iesg@ietf.org>
      Intended usage: This extension includes response information
      required for federated authentication using OpenID Connect.

6.2.  JSON Web Token Claims Registry

   IANA is requested to register the following values in the JSON Web
   Token Claims Registry:

      Claim Name: "purpose"
      Claim Description: This claim describes the stated purpose for
      submitting a request to access a protected RDAP resource.
      Change Controller: IESG
      Specification Document(s): Section 3.1.4.1 of this document.

      Claim Name: "dnt"
      Claim Description: This claim contains a JSON boolean literal that
      describes an End-User's "do not track" preference for identity
      tracking, logging, or recording when accessing a protected RDAP
      resource.
      Change Controller: IESG
      Specification Document(s): Section 3.1.4.2 of this document.

6.3.  RDAP Query Purpose Registry

   IANA is requested to create a new protocol registry to manage RDAP
   query purpose values.  This registry should appear under its own
   heading on IANA's protocol listings, using the same title as the name
   of the registry.  The information to be registered and the procedures



Hollenbeck              Expires December 2, 2019               [Page 17]


Internet-Draft           OpenID Connect for RDAP                May 2019


   to be followed in populating the registry are described in
   Section 3.1.4.1.

   Name of registry: Registration Data Access Protocol (RDAP) Query
   Purpose Values

   Section at http://www.iana.org/protocols:

   Registry Title: Registration Data Access Protocol (RDAP) Query
   Purpose Values

   Registry Name: Registration Data Access Protocol (RDAP) Query Purpose
   Values

   Registration Procedure: Specification Required

   Reference: This draft

   Required information: See Section 3.1.4.1.

   Review process: "Specification Required" as described in RFC 5226
   [RFC5226].

   Size, format, and syntax of registry entries: See Section 3.1.4.1.

   Initial assignments and reservations:

   -----BEGIN FORM-----
   Value: domainNameControl
   Description: Tasks within the scope of this purpose include creating
   and managing and monitoring a registrant's own domain name, including
   creating the domain name, updating information about the domain name,
   transferring the domain name, renewing the domain name, deleting the
   domain name, maintaining a domain name portfolio, and detecting
   fraudulent use of the Registrant's own contact information.
   -----END FORM-----

   -----BEGIN FORM-----
   Value: personalDataProtection
   Description: Tasks within the scope of this purpose include
   identifying the accredited privacy/proxy provider associated with a
   domain name and reporting abuse, requesting reveal, or otherwise
   contacting the provider.
   -----END FORM-----

   -----BEGIN FORM-----
   Value: technicalIssueResolution




Hollenbeck              Expires December 2, 2019               [Page 18]


Internet-Draft           OpenID Connect for RDAP                May 2019


   Description: Tasks within the scope of this purpose include (but are
   not limited to) working to resolve technical issues, including email
   delivery issues, DNS resolution failures, and web site functional
   issues.
   -----END FORM-----

   -----BEGIN FORM-----
   Value: domainNameCertification
   Description: Tasks within the scope of this purpose include a
   Certification Authority (CA) issuing an X.509 certificate to a
   subject identified by a domain name.
   -----END FORM-----

   -----BEGIN FORM-----
   Value: individualInternetUse
   Description: Tasks within the scope of this purpose include
   identifying the organization using a domain name to instill consumer
   trust, or contacting that organization to raise a customer complaint
   to them or file a complaint about them.
   -----END FORM-----

   -----BEGIN FORM-----
   Value: businessDomainNamePurchaseOrSale
   Description: Tasks within the scope of this purpose include making
   purchase queries about a domain name, acquiring a domain name from a
   registrant, and enabling due diligence research.
   -----END FORM-----

   -----BEGIN FORM-----
   Value: academicPublicInterestDNSRResearch
   Description: Tasks within the scope of this purpose include academic
   public interest research studies about domain names published in the
   registration data service, including public information about the
   registrant and designated contacts, the domain name's history and
   status, and domain names registered by a given registrant (reverse
   query).
   -----END FORM-----

   -----BEGIN FORM-----
   Value: legalActions
   Description: Tasks within the scope of this purpose include
   investigating possible fraudulent use of a registrant's name or
   address by other domain names, investigating possible trademark
   infringement, contacting a registrant/licensee's legal representative
   prior to taking legal action and then taking a legal action if the
   concern is not satisfactorily addressed.
   -----END FORM-----




Hollenbeck              Expires December 2, 2019               [Page 19]


Internet-Draft           OpenID Connect for RDAP                May 2019


   -----BEGIN FORM-----
   Value: regulatoryAndContractEnforcement
   Description: Tasks within the scope of this purpose include tax
   authority investigation of businesses with online presence, Uniform
   Dispute Resolution Policy (UDRP) investigation, contractual
   compliance investigation, and registration data escrow audits.
   -----END FORM-----

   -----BEGIN FORM-----
   Value: criminalInvestigationAndDNSAbuseMitigation
   Description: Tasks within the scope of this purpose include reporting
   abuse to someone who can investigate and address that abuse, or
   contacting entities associated with a domain name during an offline
   criminal investigation.
   -----END FORM-----

   -----BEGIN FORM-----
   Value: dnsTransparency
   Description: Tasks within the scope of this purpose involve querying
   the registration data made public by registrants to satisfy a wide
   variety of use cases around informing the general public.
   -----END FORM-----

7.  Implementation Status

   NOTE: Please remove this section and the reference to RFC 7942 prior
   to publication as an RFC.

   This section records the status of known implementations of the
   protocol defined by this specification at the time of posting of this
   Internet-Draft, and is based on a proposal described in RFC 7942
   [RFC7942].  The description of implementations in this section is
   intended to assist the IETF in its decision processes in progressing
   drafts to RFCs.  Please note that the listing of any individual
   implementation here does not imply endorsement by the IETF.
   Furthermore, no effort has been spent to verify the information
   presented here that was supplied by IETF contributors.  This is not
   intended as, and must not be construed to be, a catalog of available
   implementations or their features.  Readers are advised to note that
   other implementations may exist.

   According to RFC 7942, "this will allow reviewers and working groups
   to assign due consideration to documents that have the benefit of
   running code, which may serve as evidence of valuable experimentation
   and feedback that have made the implemented protocols more mature.
   It is up to the individual working groups to use this information as
   they see fit".




Hollenbeck              Expires December 2, 2019               [Page 20]


Internet-Draft           OpenID Connect for RDAP                May 2019


7.1.  Verisign Labs

      Responsible Organization: Verisign Labs
      Location: https://rdap.verisignlabs.com/
      Description: This implementation includes support for domain
      registry RDAP queries using live data from the .cc and .tv country
      code top-level domains and the .career generic top-level domain.
      Three access levels are provided based on the authenticated
      identity of the client:

      1.  Unauthenticated: Limited information is returned in response
          to queries from unauthenticated clients.
      2.  Basic: Clients who authenticate using a publicly available
          identity provider like Google Gmail or Microsoft Hotmail will
          receive all of the information available to an unauthenticated
          client plus additional registration metadata, but no
          personally identifiable information associated with entities.
      3.  Advanced: Clients who authenticate using a more restrictive
          identity provider will receive all of the information
          available to a Basic client plus whatever information the
          server operator deems appropriate for a fully authorized
          client.  Currently supported identity providers include those
          developed by Verisign Labs
          (https://testprovider.rdap.verisignlabs.com/) and CZ.NIC
          (https://www.mojeid.cz/).
      Level of Maturity: This is a "proof of concept" research
      implementation.
      Coverage: This implementation includes all of the features
      described in this specification.
      Contact Information: Scott Hollenbeck, shollenbeck@verisign.com

7.2.  Viagenie

      Responsible Organization: Viagenie
      Location: https://auth.viagenie.ca
      Description: This implementation is an OpenID identity provider
      enabling users and registries to connect to the federation.  It
      also includes a barebone RDAP client and RDAP server in order to
      test the authentication framework.  Various level of purposes are
      available for testing.
      Level of Maturity: This is a "proof of concept" research
      implementation.
      Coverage: This implementation includes most features described in
      this specification as an identity provider.
      Contact Information: Marc Blanchet, marc.blanchet@viagenie.ca






Hollenbeck              Expires December 2, 2019               [Page 21]


Internet-Draft           OpenID Connect for RDAP                May 2019


8.  Security Considerations

   Security considerations for RDAP can be found in RFC 7481 [RFC7481].
   Security considerations for OpenID Connect Core [OIDCC] and OAuth 2.0
   [RFC6749] can be found in their reference specifications.  OpenID
   Connect defines optional mechanisms for robust signing and encryption
   that can be used to provide data integrity and data confidentiality
   services as needed.  Security services for ID Tokens and Access
   Tokens (with references to the JWT specification) are described in
   the OpenID Connect Core protocol.

8.1.  Authentication and Access Control

   Having completed the client identification, authorization, and
   validation process, an RDAP server can make access control decisions
   based on a comparison of client-provided information and local
   policy.  For example, a client who provides an email address (and
   nothing more) might be entitled to receive a subset of the
   information that would be available to a client who provides an email
   address, a full name, and a stated purpose.  Development of these
   access control policies is beyond the scope of this document.

9.  Acknowledgements

   The author would like to acknowledge the following individuals for
   their contributions to the development of this document: Tom
   Harrison, Russ Housley, Rhys Smith, Jaromir Talir, and Alessandro
   Vesely.  In addition, the Verisign Registry Services Lab development
   team of Joseph Harvey, Andrew Kaizer, Sai Mogali, Anurag Saxena,
   Swapneel Sheth, Nitin Singh, and Zhao Zhao provided critical "proof
   of concept" implementation experience that helped demonstrate the
   validity of the concepts described in this document.

10.  References

10.1.  Normative References

   [I-D.ietf-oauth-device-flow]
              Denniss, W., Bradley, J., Jones, M., and H. Tschofenig,
              "OAuth 2.0 Device Authorization Grant", draft-ietf-oauth-
              device-flow-15 (work in progress), March 2019.

   [I-D.ietf-oauth-token-exchange]
              Jones, M., Nadalin, A., Campbell, B., Bradley, J., and C.
              Mortimore, "OAuth 2.0 Token Exchange", draft-ietf-oauth-
              token-exchange-16 (work in progress), October 2018.





Hollenbeck              Expires December 2, 2019               [Page 22]


Internet-Draft           OpenID Connect for RDAP                May 2019


   [OIDC]     OpenID Foundation, "OpenID Connect",
              <http://openid.net/connect/>.

   [OIDCC]    OpenID Foundation, "OpenID Connect Core incorporating
              errata set 1", November 2014,
              <http://openid.net/specs/openid-connect-core-1_0.html>.

   [OIDCD]    OpenID Foundation, "OpenID Connect Discovery 1.0
              incorporating errata set 1", November 2014,
              <http://openid.net/specs/
              openid-connect-discovery-1_0.html>.

   [OIDCR]    OpenID Foundation, "OpenID Connect Dynamic Client
              Registration 1.0 incorporating errata set 1", November
              2014, <http://openid.net/specs/
              openid-connect-registration-1_0.html>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, DOI 10.17487/RFC3986, January 2005,
              <https://www.rfc-editor.org/info/rfc3986>.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", RFC 5226,
              DOI 10.17487/RFC5226, May 2008,
              <https://www.rfc-editor.org/info/rfc5226>.

   [RFC6749]  Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
              RFC 6749, DOI 10.17487/RFC6749, October 2012,
              <https://www.rfc-editor.org/info/rfc6749>.

   [RFC6750]  Jones, M. and D. Hardt, "The OAuth 2.0 Authorization
              Framework: Bearer Token Usage", RFC 6750,
              DOI 10.17487/RFC6750, October 2012,
              <https://www.rfc-editor.org/info/rfc6750>.

   [RFC7009]  Lodderstedt, T., Ed., Dronia, S., and M. Scurtescu, "OAuth
              2.0 Token Revocation", RFC 7009, DOI 10.17487/RFC7009,
              August 2013, <https://www.rfc-editor.org/info/rfc7009>.







Hollenbeck              Expires December 2, 2019               [Page 23]


Internet-Draft           OpenID Connect for RDAP                May 2019


   [RFC7230]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing",
              RFC 7230, DOI 10.17487/RFC7230, June 2014,
              <https://www.rfc-editor.org/info/rfc7230>.

   [RFC7235]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Authentication", RFC 7235,
              DOI 10.17487/RFC7235, June 2014,
              <https://www.rfc-editor.org/info/rfc7235>.

   [RFC7480]  Newton, A., Ellacott, B., and N. Kong, "HTTP Usage in the
              Registration Data Access Protocol (RDAP)", RFC 7480,
              DOI 10.17487/RFC7480, March 2015,
              <https://www.rfc-editor.org/info/rfc7480>.

   [RFC7481]  Hollenbeck, S. and N. Kong, "Security Services for the
              Registration Data Access Protocol (RDAP)", RFC 7481,
              DOI 10.17487/RFC7481, March 2015,
              <https://www.rfc-editor.org/info/rfc7481>.

   [RFC7482]  Newton, A. and S. Hollenbeck, "Registration Data Access
              Protocol (RDAP) Query Format", RFC 7482,
              DOI 10.17487/RFC7482, March 2015,
              <https://www.rfc-editor.org/info/rfc7482>.

   [RFC7483]  Newton, A. and S. Hollenbeck, "JSON Responses for the
              Registration Data Access Protocol (RDAP)", RFC 7483,
              DOI 10.17487/RFC7483, March 2015,
              <https://www.rfc-editor.org/info/rfc7483>.

   [RFC7515]  Jones, M., Bradley, J., and N. Sakimura, "JSON Web
              Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
              2015, <https://www.rfc-editor.org/info/rfc7515>.

   [RFC7519]  Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
              (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
              <https://www.rfc-editor.org/info/rfc7519>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

10.2.  Informative References

   [RFC4949]  Shirey, R., "Internet Security Glossary, Version 2",
              FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007,
              <https://www.rfc-editor.org/info/rfc4949>.




Hollenbeck              Expires December 2, 2019               [Page 24]


Internet-Draft           OpenID Connect for RDAP                May 2019


   [RFC7942]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", BCP 205,
              RFC 7942, DOI 10.17487/RFC7942, July 2016,
              <https://www.rfc-editor.org/info/rfc7942>.

10.3.  URIs

   [1] https://www.icann.org/en/system/files/files/final-report-
       06jun14-en.pdf

   [2] http://curl.haxx.se/

   [3] https://www.gnu.org/software/wget/

Appendix A.  Change Log

   00:  Initial working group version ported from draft-hollenbeck-
      regext-rdap-openid-10.
   01:  Modified ID Token delivery approach to note proper use of an
      HTTP bearer authorization header.
   02:  Modified token delivery approach (access token is the bearer
      token) to note proper use of an HTTP bearer authorization header,
      fixing the change made in -01.

Author's Address

   Scott Hollenbeck
   Verisign Labs
   12061 Bluemont Way
   Reston, VA  20190
   USA

   Email: shollenbeck@verisign.com
   URI:   http://www.verisignlabs.com/

















Hollenbeck              Expires December 2, 2019               [Page 25]