Registration Protocols Extensions R. Carney
Internet-Draft J. Snitker
Intended status: Standards Track GoDaddy Inc.
Expires: April 14, 2019 October 11, 2018
Validate Mapping for the Extensible Provisioning Protocol (EPP)
draft-ietf-regext-validate-04
Abstract
This document describes an Extensible Provisioning Protocol (EPP)
mapping for the validation of contact and eligibility data.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 14, 2019.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Carney & Snitker Expires April 14, 2019 [Page 1]
Internet-Draft Validate October 2018
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Conventions Used in This Document . . . . . . . . . . . . 3
2. Object Attributes . . . . . . . . . . . . . . . . . . . . . . 3
2.1. Key Value . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2. Validate Id . . . . . . . . . . . . . . . . . . . . . . . 4
2.3. Validate PostalInfo, Voice, Fax, Email, AuthInfo . . . . 4
3. EPP Command Mapping . . . . . . . . . . . . . . . . . . . . . 4
3.1. EPP Query Commands . . . . . . . . . . . . . . . . . . . 4
3.1.1. EPP <check> Command . . . . . . . . . . . . . . . . . 4
3.1.2. EPP <info> Command . . . . . . . . . . . . . . . . . 8
3.1.3. EPP <transfer> Command . . . . . . . . . . . . . . . 8
3.2. EPP Transform Commands . . . . . . . . . . . . . . . . . 9
3.2.1. EPP <create> Command . . . . . . . . . . . . . . . . 9
3.2.2. EPP <delete> Command . . . . . . . . . . . . . . . . 9
3.2.3. EPP <renew> Command . . . . . . . . . . . . . . . . . 9
3.2.4. EPP <transfer> Command . . . . . . . . . . . . . . . 9
3.2.5. EPP <update> Command . . . . . . . . . . . . . . . . 9
4. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1. Validate Schema . . . . . . . . . . . . . . . . . . . . . 9
5. Security Considerations . . . . . . . . . . . . . . . . . . . 13
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13
6.1. XML Namespace . . . . . . . . . . . . . . . . . . . . . . 13
7. Implemntation Status . . . . . . . . . . . . . . . . . . . . 13
7.1. To Be Filled In . . . . . . . . . . . . . . . . . . . . . 14
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 14
9. Change History . . . . . . . . . . . . . . . . . . . . . . . 14
9.1. Change from 03 to 04 . . . . . . . . . . . . . . . . . . 14
9.2. Change from 02 to 03 . . . . . . . . . . . . . . . . . . 14
9.3. Change from 01 to 02 . . . . . . . . . . . . . . . . . . 14
9.4. Change from 00 to 01 . . . . . . . . . . . . . . . . . . 14
9.5. Change from carney-regext 01 to ietf-regext 00 . . . . . 15
10. Normative References . . . . . . . . . . . . . . . . . . . . 15
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 15
1. Introduction
This document describes a Validate mapping for version 1.0 of the
Extensible Provisioning Protocol (EPP) [RFC5730]. This EPP mapping
specifies a flexible schema by which EPP clients and servers can
reliably validate contact and eligibility data.
With the increased number of restrictions on contacts and required
data points (license, ids, etc.) to register a domain name, a way to
validate the data points prior to issuing a transform command is
becoming more important.
Carney & Snitker Expires April 14, 2019 [Page 2]
Internet-Draft Validate October 2018
1.1. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
XML is case sensitive. Unless stated otherwise, XML specifications
and examples provided in this document MUST be interpreted in the
character case presented in order to develop a conforming
implementation.
"validate" is used as an abbreviation for
"urn:ietf:params:xml:ns:validate-0.2". The XML namespace prefix
"validate" is used, but implementations MUST NOT depend on it and
instead employ a proper namespace-aware XML parser and serializer to
interpret and output the XML documents.
In examples, "C:" represents lines sent by a protocol client and "S:"
represents lines returned by a protocol server. Indentation and
white space in examples are provided only to illustrate element
relationships and are not a REQUIRED feature of this protocol.
(Note to RFC Editor: remove the following paragraph before
publication as an RFC.)
The XML namespace prefix above contains a version number,
specifically "0.2". This version number will increment with
successive versions of this document, and will reach 1.0 if and when
this document is published as an RFC. This permits clients to
distinguish which version of the extension a server has implemented.
2. Object Attributes
A EPP validation object has attributes and associated values that can
be viewed by the client. This section describes each attribute type
in detail.
2.1. Key Value
Key Value provides a flexible mechanism to share data between the
client and the server. The <validate:kv> element defines the data,
with two required simple attributes, key and value, and an optional
contactType attribute for specificity in the response, more details
below.
o An example <validate:kv key="VATID" value="0123456789"/>.
Carney & Snitker Expires April 14, 2019 [Page 3]
Internet-Draft Validate October 2018
o An example <validate:kv contactType="Admin" key="contact:cc"
value="Invalid country code for admin contact, must be MX."/>.
2.2. Validate Id
The <validate:id> element is used in two different scenarios.
First if the <validate:id> is passed by itself with no other elements
(e.g. >validate:postalInfo>) then the client intent is that this is
an already existing contact and the server should handle the request
by looking up the associated data in its system and using that data
to validate against.
Second scenario would be if the request includes additional elements
then the server should treat the <validate:id> as a temporary contact
handle and should not perform a look on the contact but use the data
that is passed in the request to validate against.
2.3. Validate PostalInfo, Voice, Fax, Email, AuthInfo
These elements are intended to mirror the definitions in [RFC5733].
3. EPP Command Mapping
A detailed description of the EPP syntax and semantics can be found
in [RFC5730]. The command mappings described here are specifically
for the Validate Extension.
3.1. EPP Query Commands
EPP provides three commands to retrieve object information: <check>
to determine if an object is known to the server, <info> to retrieve
detailed information associated with an object, and <transfer> to
retrieve object transfer status information.
3.1.1. EPP <check> Command
The EPP <check> command is used to validate a list of contact
information. The <check> command MUST contain a <validate:check>
element that identifies the validate namespace. The <validate:check>
element contains the following child elements:
o one or more <validate:contact> element(s) for each contact that is
to be validated that contains the contact type of the contact to
be validated.
The <validate:contact> element has two required attributes:
contactType, which describes the role (registrant, admin, tech,
Carney & Snitker Expires April 14, 2019 [Page 4]
Internet-Draft Validate October 2018
billing, etc.) of the contact that the contact should be validated
for; and tld, which provides the top level domain to be validated
against. The <validate:contact> element contains the following child
elements:
o one <validate:id> element (as described in section 2.2).
o an OPTIONAL <validate:postalInfo> element (as described in section
2.3).
o an OPTIONAL <validate:voice> element (as described in section
2.3).
o an OPTIONAL <validate:fax> element (as described in section 2.3).
o an OPTIONAL <validate:email> element (as described in section
2.3).
o an OPTIONAL <validate:authInfo> element (as described in section
2.3).
o zero or more <validate:kv> elements (as described in section 2.1).
The following is an example <check> command where "sh8013" and
"sh8014" are both "new" contacts and "sh8012" is an existing contact
on the server.
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
C: xmlns:validate="urn:ietf:params:xml:ns:validate-0.2"
C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
C: <command>
C: <check>
C: <validate:check>
C: <validate:contact contactType="registrant" tld="COM">
C: <validate:id>sh8013</validate:id>
C: <validate:postalInfo type="int">
C: <contact:name>John Doe</contact:name>
C: <contact:org>Example Inc.</contact:org>
C: <contact:addr>
C: <contact:street>123 Example Dr.</contact:street>
C: <contact:street>Suite 100</contact:street>
C: <contact:city>Dulles</contact:city>
C: <contact:sp>VA</contact:sp>
C: <contact:pc>20166-6503</contact:pc>
C: <contact:cc>US</contact:cc>
C: </contact:addr>
C: </validate:postalInfo>
C: <validate:voice>+1.7035555555</validate:voice>
C: <validate:fax>+1.7035555556</validate:fax>
C: <validate:email>jdoe@example.com</validate:email>
C: <validate:authInfo>
C: <contact:pw>2fooBAR</contact:pw>
C: </validate:authInfo>
Carney & Snitker Expires April 14, 2019 [Page 5]
Internet-Draft Validate October 2018
C: <validate:kv key="VAT" value="1234567890"/>
C: </validate:contact>
C: <validate:contact contactType="tech" tld="COM">
C: <validate:id>sh8012</validate:id>
C: </validate:contact>
C: <validate:contact contactType="admin" tld="COM">
C: <validate:id>sh8014</validate:id>
C: <validate:postalInfo type="int">
C: <contact:name>John Doe</contact:name>
C: <contact:org>Example Inc.</contact:org>
C: <contact:addr>
C: <contact:street>123 Example Dr.</contact:street>
C: <contact:street>Suite 100</contact:street>
C: <contact:city>Dulles</contact:city>
C: <contact:sp>VA</contact:sp>
C: <contact:pc>20166-6503</contact:pc>
C: <contact:cc>US</contact:cc>
C: </contact:addr>
C: </validate:postalInfo>
C: <validate:voice>+1.7035555555</validate:voice>
C: <validate:fax>+1.7035555556</validate:fax>
C: <validate:email>jdoe@example.com</validate:email>
C: <validate:authInfo>
C: <contact:pw>2fooBAR</contact:pw>
C: </validate:authInfo>
C: </validate:contact>
C: <validate:contact contactType="billing" tld="COM">
C: <validate:id>sh8014</validate:id>
C: <validate:postalInfo type="int">
C: <contact:name>John Doe</contact:name>
C: <contact:org>Example Inc.</contact:org>
C: <contact:addr>
C: <contact:street>123 Example Dr.</contact:street>
C: <contact:street>Suite 100</contact:street>
C: <contact:city>Dulles</contact:city>
C: <contact:sp>VA</contact:sp>
C: <contact:pc>20166-6503</contact:pc>
C: <contact:cc>US</contact:cc>
C: </contact:addr>
C: </validate:postalInfo>
C: <validate:voice>+1.7035555555</validate:voice>
C: <validate:fax>+1.7035555556</validate:fax>
C: <validate:email>jdoe@example.com</validate:email>
C: <validate:authInfo>
C: <contact:pw>2fooBAR</contact:pw>
C: </validate:authInfo>
C: </validate:contact>
C: </validate:check>
Carney & Snitker Expires April 14, 2019 [Page 6]
Internet-Draft Validate October 2018
C: </check>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When the server receives a <check> command with a <validate:contact>
element that contains only a <validate:id> element the server will
process this as an existing contact. If the contact does not exist
the server MUST return an EPP error response for that specific
<validate:contact>.
When a <check> command has been processed succesfully, the EPP
<resData> element MUST contain a child <validate:chkData> element
that identifies the validate namespace. The <validate:chkData>
element MUST contain a <validate:cd> element for each
<validate:check> element contained in the <check> command. The
<validate:cd> element contains the following child elements:
o one <validate:id> element.
o one <validate:response> element.
o zero or more <validate:kv> elements.
Carney & Snitker Expires April 14, 2019 [Page 7]
Internet-Draft Validate October 2018
The following is an example of the <check> response.
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <validate:chkData
S: xmlns:validate="urn:ietf:params:xml:ns:validate-0.2">
S: <validate:cd>
S: <validate:id>sh8013</validate:id>
S: <validate:response>1000</validate:response>
S: </validate:cd>
S: <validate:cd>
S: <validate:id>sh8014</validate:id>
S: <validate:response>2306</validate:response>
S: <validate:kv key="contact:city" value="City not valid
S: for state."/>
S: <validate:kv contactType="Admin" key="contact:cc"
S: value="Invalid country code for admin, must be mx."/>
S: <validate:kv contactType="Billing" key="VAT" value="VAT
S: required for Billing contact."/>
S: </validate:cd>
S: </validate:chkData>
S: </resData>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-ZYX</svTRID>
S: </trID>
S: </response>
S:</epp>
3.1.2. EPP <info> Command
Info semantics do not apply to validate objects, so there is no
mapping defined for the EPP <info> command.
3.1.3. EPP <transfer> Command
Transfer semantics do not apply to validate objects, so there is no
mapping defined for the EPP <transfer> command.
Carney & Snitker Expires April 14, 2019 [Page 8]
Internet-Draft Validate October 2018
3.2. EPP Transform Commands
EPP provides five commands to transform objects: <create> to create
an instance of an object with a server, <delete> to remove an
instance of an object from a server, <renew> to extend the validity
period of an object, <transfer> to manage changes in client
sponsorship of an object, and <update> to change information.
3.2.1. EPP <create> Command
Create semantics do not apply to validate objects, so there is no
mapping defined for the EPP <create> command.
3.2.2. EPP <delete> Command
Delete semantics do not apply to validate objects, so there is no
mapping defined for the EPP <delete> command.
3.2.3. EPP <renew> Command
Renew semantics do not apply to validate objects, so there is no
mapping defined for the EPP <renew> command.
3.2.4. EPP <transfer> Command
Transfer semantics do not apply to validate objects, so there is no
mapping defined for the EPP <transfer> command.
3.2.5. EPP <update> Command
Update semantics do not apply to validate objects, so there is no
mapping defined for the EPP <update> command.
4. Formal Syntax
One schema is presented here that is the EPP Validate schema.
The formal syntax presented here is a complete schema representation
of the object mapping suitable for automated validation of EPP XML
instances. The BEGIN and END tags are not part of the schema; they
are used to note the beginning and ending of the schema for URI
registration purposes.
4.1. Validate Schema
Copyright (c) 2018 IETF Trust and the persons identified as authors
of the code. All rights reserved.
Carney & Snitker Expires April 14, 2019 [Page 9]
Internet-Draft Validate October 2018
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
o Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
o Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
o Neither the name of Internet Society, IETF or IETF Trust, nor the
names of specific contributors, may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
BEGIN
<?xml version="1.0" encoding="UTF-8"?>
<schema
targetNamespace="urn:ietf:params:xml:ns:validate-0.2"
xmlns:validate="urn:ietf:params:xml:ns:validate-0.2"
xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0"
xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<annotation>
<documentation>
Extensible Provisioning Protocol v1.0
Validate Object
</documentation>
</annotation>
<!-- Import common element types. -->
<import namespace="urn:ietf:params:xml:ns:eppcom-1.0"
schemaLocation="eppcom-1.0.xsd"/>
Carney & Snitker Expires April 14, 2019 [Page 10]
Internet-Draft Validate October 2018
<import namespace="urn:ietf:params:xml:ns:epp-1.0"
schemaLocation="epp-1.0.xsd"/>
<import namespace="urn:ietf:params:xml:ns:contact-1.0"
schemaLocation="contact-1.0.xsd"/>
<!--
Child elements of the <check> command.
-->
<element name="check" type="validate:checkType"/>
<complexType name="checkType">
<sequence>
<element name="contact"
type="validate:validateContactType"
maxOccurs="unbounded" />
</sequence>
</complexType>
<complexType name="validateContactType">
<sequence>
<element name="id"
type="eppcom:clIDType" />
<element name="postalInfo"
type="contact:postalInfoType"
minOccurs="0" maxOccurs="2" />
<element name="voice"
type="contact:e164Type" minOccurs="0" />
<element name="fax"
type="contact:e164Type" minOccurs="0" />
<element name="email"
type="eppcom:minTokenType" minOccurs="0"/>
<element name="authInfo"
type="contact:authInfoType"
minOccurs="0"/>
<element name="kv"
type="validate:kvType" minOccurs="0"
maxOccurs="unbounded" />
</sequence>
<attribute name="contactType" type="eppcom:labelType"
use="required"/>
<attribute name="tld"
type="eppcom:labelType" use="required"/>
</complexType>
<complexType name="kvType">
<attribute name="contactType"
type="eppcom:labelType" use="optional" />
<attribute name="key"
Carney & Snitker Expires April 14, 2019 [Page 11]
Internet-Draft Validate October 2018
type="validate:keyType" use="required" />
<attribute name="value"
type="validate:valueType" use="required" />
</complexType>
<simpleType name="keyType">
<restriction base="token">
<minLength value="1" />
</restriction>
</simpleType>
<simpleType name="valueType">
<restriction base="token">
<minLength value="0" />
</restriction>
</simpleType>
<!--
Child elements of the <check> response.
-->
<element name="chkData" type="validate:chkDataType" />
<complexType name="chkDataType">
<sequence>
<element name="cd"
type="validate:resCreateDataType" maxOccurs="unbounded" />
</sequence>
</complexType>
<complexType name="resCreateDataType">
<sequence>
<element name="id"
type="eppcom:clIDType" />
<element name="response"
type="epp:resultCodeType" />
<element name="kv"
type="validate:kvType"
minOccurs="0" maxOccurs="unbounded" />
</sequence>
</complexType>
</schema>
END
Carney & Snitker Expires April 14, 2019 [Page 12]
Internet-Draft Validate October 2018
5. Security Considerations
The mapping described in this document do not provide any security
services beyond those described by EPP [RFC5730] and protocol layers
used by EPP. The security considerations described in these other
specifications apply to this specification as well.
6. IANA Considerations
6.1. XML Namespace
This document uses URNs to describe XML namespaces and XML schemas
conforming to a registry mechanism described in [RFC3688].
Registration request for the validate namespace:
URI: urn:ietf:params:xml:ns:validate-1.0
Registrant Contact: IESG
XML: None. Namespace URIs do not represent an XML specification.
Registration request for the validate schema:
URI: urn:ietf:params:xml:schema:validate-1.0
Registrant Contact: IESG
XML: See the "Formal Syntax" section of this document.
7. Implemntation Status
Note to RFC Editor: Please remove this section and the reference to
[RFC7942] before publication.
This section records the status of known implementations of the
protocol defined by this specification at the time of posting of this
Internet-Draft, and is based on a proposal described in [RFC7942].
The description of implementations in this section is intended to
assist the IETF in its decision processes in progressing drafts to
RFCs. Please note that the listing of any individual implementation
here does not imply endorsement by the IETF. Furthermore, no effort
has been spent to verify the information presented here that was
supplied by IETF contributors. This is not intended as, and must not
be construed to be, a catalog of available implementations or their
features. Readers are advised to note that other implementations may
exist.
Carney & Snitker Expires April 14, 2019 [Page 13]
Internet-Draft Validate October 2018
According to [RFC7942], "this will allow reviewers and working groups
to assign due consideration to documents that have the benefit of
running code, which may serve as evidence of valuable experimentation
and feedback that have made the implemented protocols more mature.
It is up to the individual working groups to use this information as
they see fit".
7.1. To Be Filled In
Add implementation details once available.
8. Acknowledgements
The authors wish to thank the following persons for their feedback
and suggestions:
o Kevin Allendorf of GoDaddy Inc.
o Jody Kolker of GoDaddy Inc.
o James Gould of Verisign Inc
9. Change History
9.1. Change from 03 to 04
Removed the <validate:cd> element from the <check> command, moving
all sub-elements to the <validate:contact> element to simplify. Also
removed the <disclose> element as it was not needed in this context.
Also updated references to current versions of documents.
9.2. Change from 02 to 03
Corrected some formatting issues.
9.3. Change from 01 to 02
Corrected some formatting issues.
9.4. Change from 00 to 01
After review and broad feedback, extensive changes have been made
transforming the original document from a standalone extension
command to using the <check> command and response framework. Stubbed
in an Implementation section for later documentation.
Carney & Snitker Expires April 14, 2019 [Page 14]
Internet-Draft Validate October 2018
9.5. Change from carney-regext 01 to ietf-regext 00
Updated miscellaneous verbiage to reflect the change from an
extension and changed to ietf naming as REGEXT WG will assume this
work.
10. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>.
[RFC5730] Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
<https://www.rfc-editor.org/info/rfc5730>.
[RFC5733] Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
Contact Mapping", STD 69, RFC 5733, DOI 10.17487/RFC5733,
August 2009, <https://www.rfc-editor.org/info/rfc5733>.
[RFC7942] Sheffer, Y. and A. Farrel, "Improving Awareness of Running
Code: The Implementation Status Section", BCP 205,
RFC 7942, DOI 10.17487/RFC7942, July 2016,
<https://www.rfc-editor.org/info/rfc7942>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
Authors' Addresses
Roger Carney
GoDaddy Inc.
14455 N. Hayden Rd. #219
Scottsdale, AZ 85260
US
Email: rcarney@godaddy.com
URI: http://www.godaddy.com
Carney & Snitker Expires April 14, 2019 [Page 15]
Internet-Draft Validate October 2018
Joseph Snitker
GoDaddy Inc.
14455 N. Hayden Rd. #219
Scottsdale, AZ 85260
US
Email: jsnitker@godaddy.com
URI: http://www.godaddy.com
Carney & Snitker Expires April 14, 2019 [Page 16]
