Internet Draft APM MIB July 20, 2001
Application Performance Measurement MIB
draft-ietf-rmonmib-apm-mib-04.txt
July 20, 2001
Steven Waldbusser
waldbusser@nextbeacon.com
Status of this Memo
This document is an Internet-Draft and is in full conformance
with all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet
Engineering Task Force (IETF), its areas, and its working
groups. Note that other groups may also distribute working
documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other
documents at any time. It is inappropriate to use Internet-
Drafts as reference material or to cite them other than as
"work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed
at http://www.ietf.org/shadow.html.
Copyright Notice
Copyright (C) The Internet Society (2001). All Rights Reserved.
1. Abstract
This memo defines a portion of the Management Information Base
(MIB) for use with network management protocols in TCP/IP-
based internets. In particular, it defines objects for
measuring the application performance as experienced by end-
Steven Waldbusser Expires January 20, 2002 [Page 1]
Internet Draft APM MIB July 20, 2001
users.
2. The SNMP Management Framework
The SNMP Management Framework presently consists of five
major components:
o An overall architecture, described in RFC 2571 [1].
o Mechanisms for describing and naming objects and
events for the purpose of management. The first
version of this Structure of Management Information
(SMI) is called SMIv1 and described in STD 16, RFC
1155 [2], STD 16, RFC 1212 [3] and RFC 1215 [4]. The
second version, called SMIv2, is described in STD 58,
RFC 2578 [5], RFC 2579 [6] and RFC 2580 [7].
o Message protocols for transferring management
information. The first version of the SNMP message
protocol is called SNMPv1 and described in STD 15, RFC
1157 [8]. A second version of the SNMP message
protocol, which is not an Internet standards track
protocol, is called SNMPv2c and described in RFC 1901
[9] and RFC 1906 [10]. The third version of the
message protocol is called SNMPv3 and described in RFC
1906 [10], RFC 2572 [11] and RFC 2574 [12].
o Protocol operations for accessing management
information. The first set of protocol operations and
associated PDU formats is described in STD 15, RFC
1157 [8]. A second set of protocol operations and
associated PDU formats is described in RFC 1905 [13].
o A set of fundamental applications described in RFC
2573 [14] and the view-based access control mechanism
described in RFC 2575 [15].
A more detailed introduction to the current SNMP Management
Framework can be found in RFC 2570 [22].
Managed objects are accessed via a virtual information
store, termed the Management Information Base or MIB.
Objects in the MIB are defined using the mechanisms defined
in the SMI.
Steven Waldbusser Expires January 20, 2002 [Page 2]
Internet Draft APM MIB July 20, 2001
This memo specifies a MIB module that is compliant to the
SMIv2. A MIB conforming to the SMIv1 can be produced
through the appropriate translations. The resulting
translated MIB must be semantically equivalent, except
where objects or events are omitted because no translation
is possible (use of Counter64). Some machine readable
information in SMIv2 will be converted into textual
descriptions in SMIv1 during the translation process.
However, this loss of machine readable information is not
considered to change the semantics of the MIB.
Steven Waldbusser Expires January 20, 2002 [Page 3]
Internet Draft APM MIB July 20, 2001
3. Overview
This document continues the architecture created in the RMON
MIB [18] by providing analysis of application performance as
experienced by end-users.
Application performance measurement measures the quality of
service delivered to end-users by applications. With this
perspective, a true end-to-end view of the IT infrastrure
results, combining the performance of the application,
desktop, network, and server, as well as any positive or
negative interactions between these components.
Despite all the technically sophisticated ways in which
networking and system resources can be measured, human end-
users perceive only two things about an application:
availability and responsiveness.
Availability - The percentage of the time that the
application is ready to give a user service.
Responsiveness - The speed at which the application
delivers the requested service.
A transaction is an action initiated by a user that starts and
completes a distributed processing function. A transaction
begins when a user initiates a request for service (i.e.
pushing a submit button) and ends when the work is completed
(i.e. information is provided or a confirmation is delivered).
A transaction is the fundamental item measured by the APM MIB.
A failed transaction is a transaction that fails to provide
the service requested by the end user, regardless of whether
it is due to a processing failure or transport failure.
An application protocol (e.g. POP3) may implement different
commands or application "verbs" (e.g. POP3 Login and POP3
Retrieval). It will often be interesting to monitor these
verbs separately because:
1) The verbs may have widely differing performance
characteristics
(in fact some may be response time oriented while others
are
throughput oriented)
2) The verbs have varying business significance
Steven Waldbusser Expires January 20, 2002 [Page 4]
Internet Draft APM MIB July 20, 2001
3) It provides more granularity of exactly what might be
performing
poorly
This MIB allows the measurement of a parent application, its
component verbs, or both. If monitoring both, one can watch
the top-level application and then drill down to the verbs
when trouble is spotted to learn which subcomponents are in
trouble. Each application verb is registered separately in the
Protocol Directory as a child of its parent application.
Application protocols implement one of three different types
of transactions: transaction-oriented, throughput-oriented, or
streaming-oriented. While the availability metric is the same
for all three types, the responsiveness metric varies:
Transaction-Oriented: These transactions have a fairly
constant workload to perform for all transactions. The
responsiveness metric for transaction-oriented applications
is application response time, the elapsed time between the
user's request for service (e.g. pushing the submit button)
and the completion of the request (e.g. displaying the
results) and is measured in milliseconds. This is commonly
referred to as end-user response time.
Throughput-Oriented: These transactions have widely varying
workloads based on the amount of data requested. The
responsiveness metric for throughput-oriented applications
is kilobits per second.
Streaming-Oriented: These transactions deliver data at a
constant metered rate of speed regardless of excess
capacity in the networking and computing infrastructure.
However, when the infrastructure's cannot deliver data at
this speed, interruption of service or degradation of
service can result. The responsiveness metric for
streaming-oriented applications is the signal quality ratio
of time that the service is degraded or interrupted to the
total service time. This metric is measured in parts per
million.
Steven Waldbusser Expires January 20, 2002 [Page 5]
Internet Draft APM MIB July 20, 2001
3.1. Report Aggregation
This MIB provides functions to aggregate measurements into
higher level summaries.
Every transaction is identified by its application, server,
and client and has an availability measure as well as a
responsiveness measure. The appropriate responsiveness measure
is context-sensitive depending on whether the application is
transaction-oriented, throughput-oriented, or streaming-
oriented. For example, in a 5 minute period several
transactions might be recorded:
Application Client Server Successful Responsiveness
HTTP Jim Amazon 1 6 sec.
SAP/R3 Jane SAP 1 17 sec.
HTTP Joe HR 0 -
FTP Jim ietf 1 47MspTb (212 Kbps)
HTTP Joe HR 1 25 sec.
RealVideo Joe CNN 1 100.0%
HTTP Jane HR 1 5 sec.
These transactions can be aggregated in several ways,
providing statistical summaries - for example summarizing all
HTTP transactions, or all HTTP transactions to the HR Server.
Note that data from different applications may not be
summarized because:
1. The performance characteristics of different
applications differ widely enough to render statistical
analysis meaningless.
2. The responsiveness metrics of different applications may
be different, making a statistical analysis impossible (in
other words, one application may be transaction-oriented,
while another is throughput-oriented).
Aggregating transactions collected over a period requires an
aggregation algorithm. In this MIB, transaction aggregation
always results in the following statistics:
TransactionCount
The total number of transactions during this period
SuccessfulTransactions
Steven Waldbusser Expires January 20, 2002 [Page 6]
Internet Draft APM MIB July 20, 2001
The total number of transactions that were successful. The
management station can derive the percent success by dividing
SuccessfulTransactions by the TransactionCount.
ResponsivenessMean
The average of the responsiveness metric for all aggregated
transactions that completed successfully
ResponsivenessMin
The minimum responsiveness metric for all aggregated transactions
that completed successfully
ResponsivenessMax
The maximum responsiveness metric for all aggregated transactions
that completed successfully
ResponsivenessBx
The count of successful transactions whose responsiveness metric
fell into the range specified for Bx. There are 7 buckets
specified. Because the performance of different applications varies
widely, the bucket ranges are specified separately for each
application (in the apmAppDirectoryTable) so that they may be
tuned to typical performance of each application.
For example, when aggregating the previous set of transactions
by application we get (for simplicity the example only shows
TransactionCount, SuccessfulTransactions, and
ResponsivenessMean):
Application Count Successful ResponsivenessMean
HTTP 4 3 12 sec.
SAP/R3 1 1 17 sec.
FTP 1 1 212 Kbps.
RealVideo 1 1 100.0%
There are four different types of aggregation.
The flows(1) aggregation is the simplest. All transactions
that share common application/server/client 3-tuples are
aggregated together, resulting in a set of metrics for all
such unique 3-tuples.
The clients(2) aggregation results in somewhat more
aggregation (i.e. fewer resulting records). All
transactions that share common application/client tuples
Steven Waldbusser Expires January 20, 2002 [Page 7]
Internet Draft APM MIB July 20, 2001
are aggregated together, resulting in a set of metrics for
all such unique tuples.
The servers(3) aggregation usually results in still more
aggregation (i.e. fewer resulting records). All
transactions that share common application/server tuples
are aggregated together, resulting in a set of metrics for
all such unique tuples.
The applications(4) aggregation results in the most
aggregation (i.e. the fewest resulting records). All
transactions that share a common application are aggregated
together, resulting in a set of metrics for all such unique
applications.
For example, if in a 5 minute period the following
transactions occurred:
Actual Transactions:
# App Client Server Successful Responsiveness
1 HTTP Jim CallCtr N -
2 HTTP Jim HR Y 12 sec.
3 HTTP Jim Amazon Y 7 sec.
4 HTTP Jim CallCtr Y 5 sec.
5 Email Jim Pop3 Y 12 sec.
6 HTTP Jane CallCtr Y 3 sec.
7 SAP/R3 Jane SAP Y 19 sec.
8 Email Jane Pop3 Y 16 sec.
9 HTTP Joe HR Y 18 sec.
The flows(1) aggregation results in the following table. Note that the
first record (HTTP/Jim/CallCtr) is the aggregation of transactions #1
and #4:
Flow Aggregation:
App Client Server Count Succe- Rsp Rsp Rsp RspB0 RspB1
ssful Mean Min Max
HTTP Jim CallCtr 2 1 5 5 5 1 0
HTTP Jim HR 1 1 12 12 12 0 1
HTTP Jim Amazon 1 1 7 7 7 1 0
Email Jim Pop3 1 1 12 12 12 0 1
HTTP Jane CallCtr 1 1 3 3 3 1 0
SAP/R3 Jane SAP 1 1 19 19 19 0 1
Email Jane Pop3 1 1 16 16 16 0 1
Steven Waldbusser Expires January 20, 2002 [Page 8]
Internet Draft APM MIB July 20, 2001
HTTP Joe HR 1 1 18 18 18 0 1
The clients(2) aggregation results in the following table. Note that
the first record (HTTP/Jim) is the aggregate of transactions #1, #2,
#3 and #4:
Client Aggregation:
App Client Count Succe- Rsp Rsp Rsp RspB0 RspB1 ...
ssful Mean Min Max
HTTP Jim 4 3 8 5 12 2 1
Email Jim 1 1 12 12 12 0 1
HTTP Jane 1 1 3 3 3 1 0
SAP/R3 Jane 1 1 19 19 19 0 1
Email Jane 1 1 16 16 16 0 1
HTTP Joe 1 1 18 18 18 0 1
The servers(3) aggregation results in the following table. Note that
the first record (HTTP/CallCtr) is the aggregation of transactions #1,
#4 and #6:
Server Aggregation:
App Server Count Succe- Rsp Rsp Rsp RspB0 RspB1 ...
ssful Mean Min Max
HTTP CallCtr 3 2 4 3 5 2 0
HTTP HR 2 2 15 12 18 0 2
HTTP Amazon 1 1 7 7 7 1 0
Email Pop3 2 2 14 12 16 0 2
SAP/R3 SAP 1 1 19 19 19 0 1
The applications(4) aggregation results in the following table. Note
that the first record (HTTP) is the aggregate of transactions #1, #2,
#3, #5, #6 and #9:
Application Aggregation:
App Count Succe- Rsp Rsp Rsp RspB0 RspB1 ...
ssful Mean Min Max
HTTP 6 5 9 3 18 3 2
Email 2 2 14 12 16 0 2
SAP/R3 1 1 19 19 19 0 1
Steven Waldbusser Expires January 20, 2002 [Page 9]
Internet Draft APM MIB July 20, 2001
The apmReportControlTable provides for a historical set of the
last 'X' reports, combining the historical records found in
history tables with the periodic snapshots found in TopN tables.
Conceptually the components are:
APMReportControlTable
Specifies data collection and summarization parameters, including
the number of reports to keep and the size of each report.
APMReport
Each APM Report contains an aggregated list of records
that represent data collected during a specific time period.
An APMReportControlEntry causes a family of APM Reports to be
created, where each report summarizes different, successive,
contiguous periods of time.
While the conceptual model of APM Reports shows them as distinct
entities, they are all entries in a single apmReportTable, where
entries in report 'A' are seperated from entries in report 'B'
by different values of the apmReportIndex.
+-----------------------+
| |
| APMReportControlTable |
| | +-----------+
+-----------------------+ | |
+-----------+ |
| | |
+-----------+ |---+
| | |
+----------+ |---+
| | | APMReport
|APMReport |----+ +-----------------------+
| | |Thu Mar 30 12-1PM |
+----------+ | |
|CLNT SERV PROT stats |
| |
|Joe CNN HTTP data |
|Jan POP POP3 data |
|Jan POP SMTP data |
|Bob HR PSOFT data |
|... |
|... |
+-----------------------+
Steven Waldbusser Expires January 20, 2002 [Page 10]
Internet Draft APM MIB July 20, 2001
3.2. Measurement Methodology
There are many different measurement methodologies available
for measuring application performance (e.g., probe-based,
client-based, synthetic-transaction, etc.). This specification
does not mandate a particular methodology - it is open to any
that meet the minimum requirements. Conformance to this
specification requires that the collected data match the
semantics described herein. In particular, a data collection
methodology must be able to measure response time, throughput,
streaming responsiveness and availability as specified.
Note that in some cases a transaction may run for a long time
but ultimately be successful. The measurement software
shouldn't prematurely classify lengthy transactions as
failures but should wait as long as the client application
will wait for a successful response.
3.3. Structure of MIB
The objects are arranged into the following groups:
- APM Application Directory Group
- APM User Defined Applications Group
- APM Report Group
- APM Current Transaction Group
- APM Exception Group
- APM Notification Group
These groups are the basic unit of conformance. If an agent
implements a group, then it must implement all objects in that
group. While this section provides an overview of grouping and
conformance information for this MIB, the authoritative
reference for such information is contained in the MODULE-
COMPLIANCE and OBJECT-GROUP macros later in this MIB.
These groups are defined to provide a means of assigning
object identifiers, and to provide a method for implementors
of managed agents to know which objects they must implement.
Steven Waldbusser Expires January 20, 2002 [Page 11]
Internet Draft APM MIB July 20, 2001
3.3.1. The APM Application Directory Group
The APM Application Directory group contains configuration
objects for every application or application verb monitored on
this system. This group consists of the apmAppDirectoryTable.
3.3.2. The APM User Defined Applications Group
The APM User Defined Applications Group contains objects that
allow for the tracking of applications or application verbs
that aren't registered in the protocolDirectoryTable. This
group consist of the apmHttpFilterTable and the
apmUserDefinedAppTable.
3.3.3. The APM Report Group
The APM Report Group is used to prepare regular reports that
aggregate application performance by flow, by client, by
server, or by application. This group consists of the
apmReportControlTable and the apmReportTable.
3.3.4. The APM Current Transaction Group
The APM Current Transaction Group is used to show the
transactions that are currently in progress, along with their
responsiveness metric.
Because many transactions last a very short time, they will
exist in this table for a very short time. Thus, polling this
table is not an effective mechanism for retrieving all
transactions.
This table is designed to allow a management station to check
on the status of long-lived transactions. Because the
apmReport and apmException mechanisms act only on transactions
that have finished, a network manager may not have visibility
for some time into the performance of long-lived transactions
such as streaming applications, large data transfers, or
(very) poorly performing transactions. In fact, by their very
definition, the apmReport and apmException mechanisms only
provide visibility into a problem after nothing can be done
about it. The apmCurrentTransactionTable provides visibility
into transactions that are currently executing and will allow
a management station to find status of long-lived
transactions.
Steven Waldbusser Expires January 20, 2002 [Page 12]
Internet Draft APM MIB July 20, 2001
3.3.5. The APM Exception Group
The APM Exception Group is used to generate immediate
notifications of transactions that cross certain thresholds.
The apmExceptionTable is used to configure which thresholds
are to be checked for which types of transactions. The
apmTransactionResponsivenessAlarm notification is sent when a
transaction occurs with a responsiveness that crosses a
threshold. The apmTransactionUnsuccessfulAlarm notification is
sent when a transaction fails for which exception checking was
configured.
3.3.6. The APM Notification Group
The APM Notification Group contains 2 notifications that are
sent when thresholds in the APM Exception Table are exceeded.
Steven Waldbusser Expires January 20, 2002 [Page 13]
Internet Draft APM MIB July 20, 2001
4. Definitions
APM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32, Integer32, Unsigned32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, TimeStamp,
TruthValue, DateAndTime FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
rmon, OwnerString FROM RMON-MIB
DataSource, protocolDirLocalIndex FROM RMON2-MIB;
-- Application Performance Measurement MIB
apm MODULE-IDENTITY
LAST-UPDATED "200107201500Z" -- July 20, 2001
ORGANIZATION "IETF RMON MIB Working Group"
CONTACT-INFO
"Steve Waldbusser
Phone: +1-650-948-6500
Fax: +1-650-745-0671
Email: waldbusser@nextbeacon.com"
DESCRIPTION
"The MIB module for measuring application performance
as experienced by end-users."
REVISION "200107201500Z" -- July 20, 2001
DESCRIPTION
"The original version of this MIB, published as RFCXXXX."
::= { rmon 23 }
AppLocalIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"A locally arbitrary unique identifier associated with an
application or application verb.
All objects of type AppLocalIndex are assigned by the agent
out of a common number space. In other words, AppLocalIndex
values assigned to entries in one table must not overlap with
Steven Waldbusser Expires January 20, 2002 [Page 14]
Internet Draft APM MIB July 20, 2001
AppLocalIndex values assigned to entries in another
table. Further, every protocolDirLocalIndex value registered
by the agent automatically assigns the same value out of the
AppLocalIndex number space.
For example, if the protocolDirLocalIndex values { 1, 3, 5, 7 }
have been assigned, and the apmHttpFilterLocalIndex values
{ 6, 8, 9 } have been assigned:
- Assignment of new AppLocalIndex values must not use the
values { 1, 3, 5, 6, 7, 8, 9 }.
- AppLocalIndex values { 1, 3, 5, 7 } are automatically
assigned and are associated with the identical value of
protocolDirLocalIndex. In particular, an entry in the
apmAppDirectoryTable indexed by a value provides further
information about a protocol indexed by the same value
in the protocolDirectoryTable of RMON2.
The value for each supported application must remain constant
at least from one re-initialization of the entity's network
management system to the next re-initialization, except that
if an application is deleted and re-created, it must be
re-created with a new value that has not been used since the
last re-initialization.
The specific value is meaningful only within a given SNMP
entity. An AppLocalIndex value must not be re-used until the
next agent restart."
SYNTAX Unsigned32 (1..2147483647)
-- The APM Application Directory Group
-- The Application Directory Table contains a record for every
-- application monitored by this agent. This table is also used to
-- configure whether or not an application will be measured and which
-- bucket boundaries will be used for the application.
--
-- The bucket boundaries define the break-points between bins of a
-- histogram analysis for that application. As an example of how this
-- works, consider an entry representing response-time for http.
-- If the boundaries are set as follows:
-- Boundary1: 500 milliseconds
-- Boundary2: 1 second
Steven Waldbusser Expires January 20, 2002 [Page 15]
Internet Draft APM MIB July 20, 2001
-- Boundary3: 2 seconds
-- Boundary4: 5
-- Boundary5: 15
-- Boundary6: 60
--
-- If the following measurements are made (all in milliseconds):
-- 377, 8645, 1300, 487, 1405, 775, 1115, 850, 945, 1054, 7745, 9380
--
-- A report run during this interval would report the following
-- counts:
-- Bucket1: 2
-- Bucket2: 3
-- Bucket3: 4
-- Bucket4: 0
-- Bucket5: 3
-- Bucket6: 0
-- Bucket7: 0
apmAppDirectoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApmAppDirectoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The APM MIB directory of applications and application
verbs. Some of these applications are registered in the RMON2
protocol directory, and some of them are registered in other
tables in this MIB. Regardless of where an application is
originally registered, it is assigned an AppLocalIndex value
that is the primary index for this table.
The contents of this table affect all reports and exceptions
generated by this agent. Accordingly, modification of this
table should be performed by a manager acting in the role of
administrator. In particular, management software should not
require or enforce particular configuration of this table - it
should reflect the preferences of the site administrator, not
the software author."
::= { apm 1 }
apmAppDirectoryEntry OBJECT-TYPE
SYNTAX ApmAppDirectoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The APM MIB directory of applications and application
Steven Waldbusser Expires January 20, 2002 [Page 16]
Internet Draft APM MIB July 20, 2001
verbs. An entry will exist in this table for all applications
for which application performance measurement is supported."
INDEX { apmAppDirectoryAppLocalIndex,
apmAppDirectoryResponsivenessType }
::= { apmAppDirectoryTable 1 }
ApmAppDirectoryEntry ::= SEQUENCE {
apmAppDirectoryAppLocalIndex AppLocalIndex,
apmAppDirectoryResponsivenessType INTEGER,
apmAppDirectoryConfig INTEGER,
apmAppDirectoryResponsivenessBoundary1 Integer32,
apmAppDirectoryResponsivenessBoundary2 Integer32,
apmAppDirectoryResponsivenessBoundary3 Integer32,
apmAppDirectoryResponsivenessBoundary4 Integer32,
apmAppDirectoryResponsivenessBoundary5 Integer32,
apmAppDirectoryResponsivenessBoundary6 Integer32
}
apmAppDirectoryAppLocalIndex OBJECT-TYPE
SYNTAX AppLocalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AppLocalIndex assigned for this application Directory
entry."
::= { apmAppDirectoryEntry 1 }
apmAppDirectoryResponsivenessType OBJECT-TYPE
SYNTAX INTEGER {
transactionOriented(1),
throughputOriented(2),
streamingOriented(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes and configures the agent's support for
application performance measurement for this application.
There are 3 types of measurements for different types of
applications:
Transaction-Oriented applications have a fairly constant
workload to perform for all transactions. The responsiveness
metric for transaction-oriented applications is application
response time (from first request to final delivery of
Steven Waldbusser Expires January 20, 2002 [Page 17]
Internet Draft APM MIB July 20, 2001
service) and is measured in milliseconds. This is
commonly referred to as end-user response time.
Throughput-Oriented applications have widely varying workloads
based on the nature of the client request. In particular,
throughput-oriented applications vary widely in the amount of
data that must be transported to satisfy the request. The
responsiveness metric for throughput-oriented applications is
kilobits per second.
Streaming-Oriented applications deliver data at a constant
metered rate of speed regardless of the responsiveness of the
networking and computing infrastructure. This constant rate of
speed is generally specified to be below (sometimes well
below) the nominal capability of the infrastructure. However,
when the infrastructure's cannot deliver data at this speed,
interruption of service or degradation of service can
result. The responsiveness metric for streaming-oriented
applications is the ratio of time that the service is degraded
or interrupted to the total service time. This metric is
measured in parts per million.
Note that for some applications, measuring more than one
responsiveness type may be interesting. For agents that wish
to support more than one measurement for a application, they
will populate this table with 2 entries for that application,
one for each type."
::= { apmAppDirectoryEntry 2 }
apmAppDirectoryConfig OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes and configures support for application
performance measurement for this application.
If the value of this object is on(1), the agent supports
measurement of application performance metrics for this
application and is configured to measure such metrics for all
APM MIB functions and all interfaces. If the value of this
object is off(0), the agent supports measurement of
Steven Waldbusser Expires January 20, 2002 [Page 18]
Internet Draft APM MIB July 20, 2001
application performance for this application but is configured
to not measure these metrics for any APM MIB functions or
interfaces. Whenever this value changes from on(1) to off(0),
the agent shall delete all related entries in all tables in
this MIB."
::= { apmAppDirectoryEntry 3 }
apmAppDirectoryResponsivenessBoundary1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The boundary value between bucket1 and bucket 2. If this
value is modified, all entries in the apmReportTable must be
deleted."
::= { apmAppDirectoryEntry 4 }
apmAppDirectoryResponsivenessBoundary2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The boundary value between bucket2 and bucket 3. If this
value is modified, all entries in the apmReportTable must be
deleted."
::= { apmAppDirectoryEntry 5 }
apmAppDirectoryResponsivenessBoundary3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The boundary value between bucket3 and bucket 4. If this
value is modified, all entries in the apmReportTable must be
deleted."
::= { apmAppDirectoryEntry 6 }
apmAppDirectoryResponsivenessBoundary4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The boundary value between bucket4 and bucket 5. If this
value is modified, all entries in the apmReportTable must be
deleted."
Steven Waldbusser Expires January 20, 2002 [Page 19]
Internet Draft APM MIB July 20, 2001
::= { apmAppDirectoryEntry 7 }
apmAppDirectoryResponsivenessBoundary5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The boundary value between bucket5 and bucket 6. If this
value is modified, all entries in the apmReportTable must be
deleted."
::= { apmAppDirectoryEntry 8 }
apmAppDirectoryResponsivenessBoundary6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The boundary value between bucket6 and bucket 7. If this
value is modified, all entries in the apmReportTable must be
deleted."
::= { apmAppDirectoryEntry 9 }
apmBucketBoundaryLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime the last time that any bucket boundary
in any appDirectyEntry was changed. This object can help to
determine if two managers are both trying to enforce different
configurations of this table."
::= { apm 2 }
Steven Waldbusser Expires January 20, 2002 [Page 20]
Internet Draft APM MIB July 20, 2001
-- APM HTTP Filter Table
-- The HTTP Filter Table creates virtual applications which measure the
-- performance of certain web pages or sets of web pages. Some
-- circumstances where this is particularly useful are:
--
-- - An Intranet or ASP scenario where a business application is
-- running on one or more web pages or scripts.
-- (i.e. /expense/submit.cgi?employeeID=3426&...)
-- - A web-hosting scenario where one wants to measure the
-- service level for a particular customer
-- - An e-commerce scenario where the performance of certain
-- pages needs to be monitored more closely.
-- (i.e. shopping cart, shipping, credit card authorization)
apmHttpFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApmHttpFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that creates virtual applications which measure the
performance of certain web pages or sets of web pages.
Note that when entries exist in this table some HTTP
transactions will be summarized twice: in applications
represented here as well as the HTTP application. If entries
in this table overlap, these transactions may be summarized
additional times.
The contents of this table affect all reports and exceptions
generated by this agent. Accordingly, modification of this
table should be performed by a manager acting in the role of
administrator. In particular, management software should not
require or enforce particular configuration of this table - it
should reflect the preferences of the site administrator, not
the software author."
::= { apm 3 }
apmHttpFilterEntry OBJECT-TYPE
SYNTAX ApmHttpFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A virtual application which measure the performance of certain
web pages or sets of web pages."
Steven Waldbusser Expires January 20, 2002 [Page 21]
Internet Draft APM MIB July 20, 2001
INDEX { apmHttpFilterIndex }
::= { apmHttpFilterTable 1 }
ApmHttpFilterEntry ::= SEQUENCE {
apmHttpFilterIndex Integer32,
apmHttpFilterAppLocalIndex AppLocalIndex,
apmHttpFilterServerProtocol Integer32,
apmHttpFilterServerAddress OCTET STRING,
apmHttpFilterURLPath OCTET STRING,
apmHttpFilterMatchType INTEGER,
apmHttpFilterRowStatus RowStatus
}
apmHttpFilterIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
apmHttpFilterTable."
::= { apmHttpFilterEntry 1 }
apmHttpFilterAppLocalIndex OBJECT-TYPE
SYNTAX AppLocalIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AppLocalIndex that represents HTTP transactions
that match this entry.
This object is read-only. A value is created by the agent from
an unused AppLocalIndex value when this apmHttpFilterEntry is
created."
::= { apmHttpFilterEntry 2 }
apmHttpFilterServerProtocol OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocolDirLocalIndex value of the network level protocol
of the apmHttpFilterServerAddress."
::= { apmHttpFilterEntry 3 }
apmHttpFilterServerAddress OBJECT-TYPE
Steven Waldbusser Expires January 20, 2002 [Page 22]
Internet Draft APM MIB July 20, 2001
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This entry will only represent transactions coming from the
network address specified in this object.
This is represented as an octet string with
specific semantics and length as identified
by the apmNameProtocolDirLocalIndex component of the index.
If this object is the zero-length string, then this entry will
match the associated apmHttpFilterURL `from' address."
::= { apmHttpFilterEntry 4 }
apmHttpFilterURLPath OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This entry will only represent HTTP transactions
where the URL path component in the request matches this
value. This value represents the requested path regardless of
any substitution that the server might perform.
Prior to the matching, the URL is stripped of any server
address or DNS name and consists solely of the path name on
that server.
The value of the associated apmHttpFilterMatchType dictates
the type of matching that will be attempted."
::= { apmHttpFilterEntry 5 }
apmHttpFilterMatchType OBJECT-TYPE
SYNTAX INTEGER {
exact(1),
prefix(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The matching algorithm used to compare the URL pathname.
If the value is exact(1), then the pathname component will be
compared with the associated apmHttpFilterURLPath and
Steven Waldbusser Expires January 20, 2002 [Page 23]
Internet Draft APM MIB July 20, 2001
will only be associated with this entry if it matches exactly.
If the value is prefix(2), then the pathname component will be
compared with the associated apmHttpFilterURLPath and will
only be associated with this entry if the beginning of the
pathname matches every octet of this value. Octets that extend
beyond the length of this value are ignored."
::= { apmHttpFilterEntry 6 }
apmHttpFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this apmHttpFilterEntry."
::= { apmHttpFilterEntry 7 }
apmHttpIgnoreUnregisteredURLs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, this agent will only monitor URLs registered in
the apmHttpFilterTable.
This will be used in environments that wish to monitor only
targeted URLs and to ignore large volumes of internet web
browsing traffic.
This object affects all reports and exceptions generated by
this agent. Accordingly, modification of this object should be
performed by a manager acting in the role of administrator. In
particular, management software should not require or enforce
particular configuration of this object - it should reflect
the preferences of the site administrator, not the software
author."
::= { apm 4 }
apmHttp4xxIsFailure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, this agent will recognize HTTP errors in the range
of 400 through 409 and will treat them as unavailable
Steven Waldbusser Expires January 20, 2002 [Page 24]
Internet Draft APM MIB July 20, 2001
transactions. When false or when this object isn't supported,
they will be treated as successful transactions.
This object allows such error pages to be tracked at the
possible expense of having user typo's treated as poor service
on the part of the web server.
This object affects all reports and exceptions generated by
this agent. Accordingly, modification of this object should be
performed by a manager acting in the role of administrator. In
particular, management software should not require or enforce
particular configuration of this object - it should reflect
the preferences of the site administrator, not the software
author."
::= { apm 5 }
-- The APM User-Defined Application Table
-- Many application protocols will never be registered with a
-- standards body (and thus included in a protocol directory standard)
-- because they are custom, in-house or proprietary
-- applications. Nevertheless, implementation strategies exist for
-- monitoring the end-user experience of these applications.
--
-- This read-only table provides a means for the agent to advertise
-- which user-defined applications it is monitoring and to associate each
-- with an AppLocalIndex value. It is an implementation-dependent
-- matter as to how the agent learns how to monitor these
-- applications.
apmUserDefinedAppTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApmUserDefinedAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that advertises user-defined applications that the
agent is measuring.
Note that when entries exist in this table some
transactions can be summarized more than once if there is
overlap between applications defined here and applications
defined in the protocol directory or in the httpFilter table."
::= { apm 6 }
Steven Waldbusser Expires January 20, 2002 [Page 25]
Internet Draft APM MIB July 20, 2001
apmUserDefinedAppEntry OBJECT-TYPE
SYNTAX ApmUserDefinedAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A user-defined application that the agent is measuring, along
with its AppLocalIndex assignment."
INDEX { apmUserDefinedAppLocalIndex }
::= { apmUserDefinedAppTable 1 }
ApmUserDefinedAppEntry ::= SEQUENCE {
apmUserDefinedAppLocalIndex AppLocalIndex,
apmUserDefinedAppParentIndex Integer32,
apmUserDefinedAppApplication SnmpAdminString
}
apmUserDefinedAppLocalIndex OBJECT-TYPE
SYNTAX AppLocalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The agent-assigned AppLocalIndex value for this
user-defined application."
::= { apmUserDefinedAppEntry 1 }
apmUserDefinedAppParentIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocolDirLocalIndex value of the highest-layer
protocol defined in the protocolDirectoryTable that this
application is a child of."
::= { apmUserDefinedAppEntry 2 }
apmUserDefinedAppApplication OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A human readable descriptive tag for this application."
::= { apmUserDefinedAppEntry 3 }
Steven Waldbusser Expires January 20, 2002 [Page 26]
Internet Draft APM MIB July 20, 2001
-- The APM Name Table
apmNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApmNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A client machine may have multiple addresses during a period
of monitoring. The apmNameTable assigns a long-lived
identifier to a client and records what addresses were
assigned to that client for periods of time. Various
implementation techniques exist for tracking this mapping but
if an agent is unable to track client address mappings, it may
map client identifiers to client addresses rather than to
distinct client machines.
When available, the agent may also record the machine name
and/or user name which may be valuable for displaying to
humans."
::= { apm 7 }
apmNameEntry OBJECT-TYPE
SYNTAX ApmNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the APM name table. An entry exists for each
period of time that a client has been associated with a
particular address."
INDEX { apmNameClientID,
apmNameProtocolDirLocalIndex,
apmNameClientAddress,
apmNameMappingStartTime }
::= { apmNameTable 1 }
ApmNameEntry ::= SEQUENCE {
apmNameClientID Unsigned32,
apmNameProtocolDirLocalIndex Integer32,
apmNameClientAddress OCTET STRING,
apmNameMappingStartTime DateAndTime,
apmNameMachineName SnmpAdminString,
apmNameUserName SnmpAdminString
}
apmNameClientID OBJECT-TYPE
Steven Waldbusser Expires January 20, 2002 [Page 27]
Internet Draft APM MIB July 20, 2001
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique ID assigned to the machine represented by this
mapping. This ID is assigned by the agent using an
implementation-specific algorithm."
::= { apmNameEntry 1 }
apmNameProtocolDirLocalIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network level protocol of this client address."
::= { apmNameEntry 2 }
apmNameClientAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network client address for this client when this mapping
was active.
This is represented as an octet string with
specific semantics and length as identified
by the apmNameProtocolDirLocalIndex component of the index.
Since this object is an index variable, it is encoded in the
index according to the index encoding rules. For example, if
the apmNameProtocolDirLocalIndex indicates an encapsulation of
ip, this object is encoded as a length octet of 4, followed by
the 4 octets of the ip address, in network byte order."
::= { apmNameEntry 3 }
apmNameMappingStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time that the agent first discovered this mapping
as active."
::= { apmNameEntry 4 }
Steven Waldbusser Expires January 20, 2002 [Page 28]
Internet Draft APM MIB July 20, 2001
apmNameMachineName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The human readable name of the client machine.
If the client has no machine name or the agent is
unable to learn the machine name, this object will be
a zero-length string."
::= { apmNameEntry 5 }
apmNameUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The human readable name of a user using the client
machine. If more than one user name are available
simultaneously, it is an implementation-dependent matter as to
which is used here. However, if the user name changes, this
object should change to reflect that change.
If the client has no recorded user name or the agent is
unable to learn a user name, this object will be
a zero-length string."
::= { apmNameEntry 6 }
Steven Waldbusser Expires January 20, 2002 [Page 29]
Internet Draft APM MIB July 20, 2001
-- The APM Report Group
apmReportControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApmReportControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Parameters that control the creation of a set of reports that
aggregate application performance."
::= { apm 8 }
apmReportControlEntry OBJECT-TYPE
SYNTAX ApmReportControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the apmReportControlTable.
An example of the indexing of this table is
apmReportControlInterval.3"
INDEX { apmReportControlIndex }
::= { apmReportControlTable 1 }
ApmReportControlEntry ::= SEQUENCE {
apmReportControlIndex Integer32,
apmReportControlDataSource DataSource,
apmReportControlAggregationType INTEGER,
apmReportControlInterval Unsigned32,
apmReportControlRequestedSize Unsigned32,
apmReportControlGrantedSize Unsigned32,
apmReportControlRequestedReports Unsigned32,
apmReportControlGrantedReports Unsigned32,
apmReportControlStartTime TimeStamp,
apmReportControlReportNumber Unsigned32,
apmReportControlInsertsDenied Unsigned32,
apmReportControlDroppedFrames Counter32,
apmReportControlOwner OwnerString,
apmReportControlStatus RowStatus
}
apmReportControlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
Steven Waldbusser Expires January 20, 2002 [Page 30]
Internet Draft APM MIB July 20, 2001
DESCRIPTION
"An index that uniquely identifies an entry in the
apmReportControlTable. Each such entry defines a unique
report whose results are placed in the apmReportTable on
behalf of this apmReportControlEntry."
::= { apmReportControlEntry 1 }
apmReportControlDataSource OBJECT-TYPE
SYNTAX DataSource
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source of the data for APM Reports generated on
behalf of this apmReportControlEntry.
If the measurement is being performed by a probe, this should
be set to interface or port where data was received for
analysis. If the measurement isn't being performed by a probe,
this should be set to the primary interface over which the
measurement is being performed. If the measurement isn't being
performed by a probe and there is no primary interface or this
information isn't known, this object should be set to 0.0.
This object may not be modified if the associated
apmReportControlStatus object is equal to active(1)."
::= { apmReportControlEntry 2 }
apmReportControlAggregationType OBJECT-TYPE
SYNTAX INTEGER {
flows(1), -- Least Aggregation
clients(2),
servers(3),
applications(4) -- Most Aggregation
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of aggregation being performed for this set of
reports.
The metrics for a single transaction are the responsiveness of
the transaction and whether the transaction succeeded (a
boolean). When such metrics are aggregated in this MIB, these
metrics are replaced by averages and distributions of
responsiveness and availability. The metrics describing
Steven Waldbusser Expires January 20, 2002 [Page 31]
Internet Draft APM MIB July 20, 2001
aggregates are constant no matter which type of aggregation is
being performed. These metrics may be found in the
apmReportTable.
The flows(1) aggregation is the simplest. All transactions
that share common application/server/client 3-tuples are
aggregated together, resulting in a set of metrics for all
such unique 3-tuples.
The clients(2) aggregation results in somewhat more
aggregation (i.e. fewer resulting records). All transactions
that share common application/client tuples are aggregated
together, resulting in a set of metrics for all such unique
tuples.
The servers(3) aggregation usually results in still more
aggregation (i.e. fewer resulting records). All transactions
that share common application/server tuples are aggregated
together, resulting in a set of metrics for all such unique
tuples.
The applications(4) aggregation results in the most
aggregation (i.e. the fewest resulting records). All
transactions that share a common application are aggregated
together, resulting in a set of metrics for all such unique
applications.
Note that it is not meaningful to aggregate applications, as
different applications have widely varying characteristics. As a
result, this set of aggregations is complete.
This object may not be modified if the associated
apmReportControlStatus object is equal to active(1)."
::= { apmReportControlEntry 3 }
apmReportControlInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds over which data is accumulated before
being aggregated into a report in the apmReportTable. All
reports with the same apmReportControlIndex will be based on
the same interval. This object must be greater than zero.
Steven Waldbusser Expires January 20, 2002 [Page 32]
Internet Draft APM MIB July 20, 2001
This object may not be modified if the associated
apmReportControlStatus object is equal to active(1)."
DEFVAL { 3600 }
::= { apmReportControlEntry 4 }
apmReportControlRequestedSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of entries requested to be allocated for each
report generated on behalf of this entry."
::= { apmReportControlEntry 5 }
apmReportControlGrantedSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries per report the agent has allocated
based on the requested amount in apmReportControlRequestedSize.
Since multiple reports are saved, the total number of entries
allocated will be this number multiplied by the value of
apmReportControlGrantedReports, or 1 if that object doesn't
exist.
When the associated apmReportControlRequestedSize object is
created or modified, the agent should set this object as
closely to the requested value as is possible for the
particular implementation and available resources. When
considering resources available, the agent must consider its
ability to allocate this many entries for all reports.
Note that while the actual number of entries stored in the
reports may fluctuate due to changing conditions, the agent
must continue to have storage available to satisfy the full
report size for all reports when necessary. Further, the agent
must not lower this value except as a result of a set to the
associated apmReportControlRequestedSize object."
::= { apmReportControlEntry 6 }
apmReportControlRequestedReports OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
Steven Waldbusser Expires January 20, 2002 [Page 33]
Internet Draft APM MIB July 20, 2001
DESCRIPTION
"The number of saved reports requested to be allocated on
behalf of this entry."
::= { apmReportControlEntry 7 }
apmReportControlGrantedReports OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of saved reports the agent has allocated
based on the requested amount in
apmReportControlRequestedReports. Since each report can have
many entries, the total number of entries allocated will be
this number multiplied by the value of
apmReportControlGrantedSize, or 1 if that object doesn't
exist.
When the associated apmReportControlRequestedReports object is
created or modified, the agent should set this object as
closely to the requested value as is possible for the
particular implementation and available resources. When
considering resources available, the agent must consider its
ability to allocate this many reports each with the number of
entries represented by apmReportControlGrantedSize, or 1 if
that object doesn't exist.
Note that while the storage required for each report may
fluctuate due to changing conditions, the agent must continue
to have storage available to satisfy the full report size for
all reports when necessary. Further, the agent must not lower
this value except as a result of a set to the associated
apmReportControlRequestedSize object."
::= { apmReportControlEntry 8 }
apmReportControlStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the system began processing the
report in progress. Note that the report in progress is not
available.
This object may be used by the management station to figure
Steven Waldbusser Expires January 20, 2002 [Page 34]
Internet Draft APM MIB July 20, 2001
out the start time for all previous reports saved for this
apmReportControlEntry, as reports are started at fixed
intervals."
::= { apmReportControlEntry 9 }
apmReportControlReportNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the report in progress. When an
apmReportControlEntry is activated, the first report will be
numbered zero."
::= { apmReportControlEntry 10 }
apmReportControlInsertsDenied OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed attempts to add an entry to reports for
this apmReportControlEntry because the number of entries
would have exceeded apmReportControlGrantedSize.
This number is valuable in determining if enough entries have
been allocated for reports in light of fluctuating network
usage. Note that since an entry that is denied will often be
attempted again, this number will not predict the exact number
of additional entries needed, but can be used to understand
the relative magnitude of the problem.
Also note that there is no ordering specified for the entries
in the report, thus there are no rules for which entries will
be omitted when not enough entries are available. As a
consequence, the agent is not required to delete 'least
valuable' entries first."
::= { apmReportControlEntry 11 }
apmReportControlDroppedFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames which were received by the agent
and therefore not accounted for in the *StatsDropEvents, but
Steven Waldbusser Expires January 20, 2002 [Page 35]
Internet Draft APM MIB July 20, 2001
for which the agent chose not to count for this entry for
whatever reason. Most often, this event occurs when the agent
is out of some resources and decides to shed load from this
collection.
This count does not include packets that were not counted
because they had MAC-layer errors.
Note that if the apmReportTables are inactive because no
applications are enabled in the application directory, this
value should be 0.
Note that, unlike the dropEvents counter, this number is the
exact number of frames dropped."
::= { apmReportControlEntry 12 }
apmReportControlOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is
therefore using the resources assigned to it."
::= { apmReportControlEntry 13 }
apmReportControlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this apmReportControlEntry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
If this object is not equal to active(1), all
associated entries in the apmReportTable shall be deleted
by the agent."
::= { apmReportControlEntry 14 }
-- The APM Report Table
apmReportTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApmReportEntry
MAX-ACCESS not-accessible
Steven Waldbusser Expires January 20, 2002 [Page 36]
Internet Draft APM MIB July 20, 2001
STATUS current
DESCRIPTION
"The data resulting from aggregated APM reports. Consult the
definition of apmReportControlAggregationType for the
definition of the various types of aggregations."
::= { apm 9 }
apmReportEntry OBJECT-TYPE
SYNTAX ApmReportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the apmReportTable.
The apmReportControlIndex value in the index identifies the
apmReportControlEntry on whose behalf this entry was created.
The apmReportIndex value in the index identifies which report
(in the series of reports) this entry is a part of.
The protocolDirLocalIndex value in the index identifies
the network layer protocol of the apmReportServerAddress.
When the associated apmReportControlAggregationType value is
equal to application(4), this value will equal 0.
The apmReportServerAddress value in the index identifies the
network layer address of the server in transactions aggregated
in this entry.
The apmReportClientID value in the index identifies the
client in transactions aggregated in this entry. It is a
reference to the clientID recorded in the apmNameTable.
The apmReportResponsivenessType value in the index identifies
the type of responsiveness metric reported by this entry and
uniquely identifies this entry when more than one
responsiveness metric is measured for a flow.
An example of the indexing of this entry is
apmReportTransactionCount.3.15.34.18.4.128.2.6.7.4.128.2.6.6.1"
INDEX { apmReportControlIndex, apmReportIndex,
apmReportAppLocalIndex, protocolDirLocalIndex,
apmReportServerAddress, apmReportClientID,
apmReportResponsivenessType }
::= { apmReportTable 1 }
ApmReportEntry ::= SEQUENCE {
apmReportIndex Integer32,
apmReportAppLocalIndex AppLocalIndex,
apmReportServerAddress OCTET STRING,
Steven Waldbusser Expires January 20, 2002 [Page 37]
Internet Draft APM MIB July 20, 2001
apmReportClientID Unsigned32,
apmReportResponsivenessType INTEGER,
apmReportTransactionCount Integer32,
apmReportSuccessfulTransactions Integer32,
apmReportResponsivenessMean Integer32,
apmReportResponsivenessMin Integer32,
apmReportResponsivenessMax Integer32,
apmReportResponsivenessB1 Integer32,
apmReportResponsivenessB2 Integer32,
apmReportResponsivenessB3 Integer32,
apmReportResponsivenessB4 Integer32,
apmReportResponsivenessB5 Integer32,
apmReportResponsivenessB6 Integer32,
apmReportResponsivenessB7 Integer32
}
apmReportIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of apmReportControlReportNumber for the report to
which this entry belongs."
::= { apmReportEntry 1 }
apmReportAppLocalIndex OBJECT-TYPE
SYNTAX AppLocalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The common application of the transactions aggregated
in this entry."
::= { apmReportEntry 2 }
apmReportServerAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network server address for this apmReportEntry.
This is represented as an octet string with
specific semantics and length as identified
by the protocolDirLocalIndex component of the index.
Steven Waldbusser Expires January 20, 2002 [Page 38]
Internet Draft APM MIB July 20, 2001
Since this object is an index variable, it is encoded in the
index according to the index encoding rules. For example, if
the protocolDirLocalIndex indicates an encapsulation of ip,
this object is encoded as a length octet of 4, followed by the
4 octets of the ip address, in network byte order.
If the associated apmReportControlAggregationType is equal to
application(4) or client(2), then this object will be a null
string and will be encoded simply as a length octet of 0."
::= { apmReportEntry 3 }
apmReportClientID OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clientID for the client represented by this
apmReportEntry.
If the associated apmReportControlAggregationType is equal to
application(4) or server(3), then this object will be set to 0."
::= { apmReportEntry 4 }
apmReportResponsivenessType OBJECT-TYPE
SYNTAX INTEGER {
transactionOriented(1),
throughputOriented(2),
streamingOriented(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of measurement that this entry represents. Entries
will only exist for measurements configured by the
apmAppDirectoryResponsivenessType object."
::= { apmReportEntry 5 }
apmReportTransactionCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of transactions aggregated into this record."
::= { apmReportEntry 6 }
Steven Waldbusser Expires January 20, 2002 [Page 39]
Internet Draft APM MIB July 20, 2001
apmReportSuccessfulTransactions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful transactions aggregated into
this record."
::= { apmReportEntry 7 }
apmReportResponsivenessMean OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The arithmetic mean of the responsiveness metrics for all
successful transactions aggregated into this record."
::= { apmReportEntry 8 }
apmReportResponsivenessMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of the responsiveness metrics for all
successful transactions aggregated into this record."
::= { apmReportEntry 9 }
apmReportResponsivenessMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of the responsiveness metrics for all
successful transactions aggregated into this record."
::= { apmReportEntry 10 }
apmReportResponsivenessB1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful transactions aggregated into this
record whose responsiveness was less than boundary1 value for
this prococol."
Steven Waldbusser Expires January 20, 2002 [Page 40]
Internet Draft APM MIB July 20, 2001
::= { apmReportEntry 11 }
apmReportResponsivenessB2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful transactions aggregated into this
record whose responsiveness was greater than or equal to the
boundary1 value for this application and less than the
boundary2 value for this application."
::= { apmReportEntry 12 }
apmReportResponsivenessB3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful transactions aggregated into this
record whose responsiveness was greater than or equal to the
boundary2 value for this application and less than the
boundary3 value for this application."
::= { apmReportEntry 13 }
apmReportResponsivenessB4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful transactions aggregated into this
record whose responsiveness was greater than or equal to the
boundary3 value for this application and less than the
boundary4 value for this application."
::= { apmReportEntry 14 }
apmReportResponsivenessB5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful transactions aggregated into this
record whose responsiveness was greater than or equal to the
boundary4 value for this application and less than the
boundary5 value for this application."
::= { apmReportEntry 15 }
Steven Waldbusser Expires January 20, 2002 [Page 41]
Internet Draft APM MIB July 20, 2001
apmReportResponsivenessB6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful transactions aggregated into this
record whose responsiveness was greater than or equal to the
boundary5 value for this application and less than the
boundary6 value for this application."
::= { apmReportEntry 16 }
apmReportResponsivenessB7 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful transactions aggregated into this
record whose responsiveness was greater than or equal to the
boundary6 value for this application."
::= { apmReportEntry 17 }
-- APM Current Transaction Table
apmCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApmCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all transactions that have been started
but have not yet finished."
::= { apm 10 }
apmCurrentEntry OBJECT-TYPE
SYNTAX ApmCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the apmCurrentTable.
The protocolDirLocalIndex value in the index identifies
the network layer protocol of the apmCurrentServerAddress and
apmCurrentClientAddress.
The apmCurrentServerAddress value in the index identifies the
network layer address of the server in the transaction
represented by this entry.
Steven Waldbusser Expires January 20, 2002 [Page 42]
Internet Draft APM MIB July 20, 2001
The apmCurrentClientID value in the index identifies the
client in the transaction represented by this entry.
The apmCurrentResponsivenessType value in the index identifies
the type of responsiveness metric reported by this entry and
uniquely identifies this entry when more than one
responsiveness metric is measured for a transaction.
An example of the indexing of this entry is
apmCurrentTransactionCount.34.18.4.128.2.6.7.4.128.2.6.6.23698.1"
INDEX { apmCurrentAppLocalIndex, protocolDirLocalIndex,
apmCurrentServerAddress, apmCurrentClientID,
apmCurrentTransactionID,
apmCurrentResponsivenessType }
::= { apmCurrentTable 1 }
ApmCurrentEntry ::= SEQUENCE {
apmCurrentAppLocalIndex AppLocalIndex,
apmCurrentServerAddress OCTET STRING,
apmCurrentClientID Unsigned32,
apmCurrentTransactionID Integer32,
apmCurrentResponsivenessType INTEGER,
apmCurrentResponsiveness Integer32,
apmCurrentSuccess TruthValue
}
apmCurrentAppLocalIndex OBJECT-TYPE
SYNTAX AppLocalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The application of the transaction represented by
in this entry."
::= { apmCurrentEntry 1 }
apmCurrentServerAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network server address for this apmCurrentEntry.
This is represented as an octet string with
specific semantics and length as identified
by the protocolDirLocalIndex component of the index.
Steven Waldbusser Expires January 20, 2002 [Page 43]
Internet Draft APM MIB July 20, 2001
For example, if the protocolDirLocalIndex indicates an
encapsulation of ip, this object is encoded as a length
octet of 4, followed by the 4 octets of the ip address,
in network byte order."
::= { apmCurrentEntry 2 }
apmCurrentClientID OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The clientID for the client in this apmCurrentEntry."
::= { apmCurrentEntry 3 }
apmCurrentTransactionID OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value for this transaction amongst other
transactions sharing the same application layer protocol and
server and client addresses. Implementations may choose to use
the value of the client's source port, when possible."
::= { apmCurrentEntry 4 }
apmCurrentResponsivenessType OBJECT-TYPE
SYNTAX INTEGER {
transactionOriented(1),
throughputOriented(2),
streamingOriented(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of measurement that this entry represents. Entries
will only exist for measurements configured by the
apmAppDirectoryResponsivenessType object."
::= { apmCurrentEntry 5 }
apmCurrentResponsiveness OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the responsiveness metric for this
Steven Waldbusser Expires January 20, 2002 [Page 44]
Internet Draft APM MIB July 20, 2001
transaction.
Note that this value may change over the lifetime of the
transaction and it is the final value of this metric that is
recorded as the responsiveness of the transaction for use in
other APM MIB functions."
::= { apmCurrentEntry 6 }
apmCurrentSuccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The success of this transaction up to this time. A
transaction that has failed may exist in this table until it
is closed. Once a transaction has been marked as failed, it
cannot move back into the successful state."
::= { apmCurrentEntry 7 }
-- The APM exception table
apmExceptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApmExceptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table creates filters so that a management station can
get immediate notification of a transaction that has had poor
availability or responsiveness.
Each apmExceptionEntry is associated with a particular type of
transaction and is applied to all transactions of that
type. Multiple apmExceptionEntries may be associated with a
particular type of transaction. A transaction type is
identified by value of the apmExceptionAppLocalIndex object.
Because the quality of a transaction is not known until it is
completed, these thresholds are only applied after the
transaction has completed."
::= { apm 11 }
apmExceptionEntry OBJECT-TYPE
SYNTAX ApmExceptionEntry
MAX-ACCESS not-accessible
STATUS current
Steven Waldbusser Expires January 20, 2002 [Page 45]
Internet Draft APM MIB July 20, 2001
DESCRIPTION
"A conceptual row in the apmExceptionTable."
INDEX { apmExceptionAppLocalIndex,
apmAppDirectoryResponsivenessType, apmExceptionIndex }
::= { apmExceptionTable 1 }
ApmExceptionEntry ::= SEQUENCE {
apmExceptionAppLocalIndex AppLocalIndex,
apmExceptionIndex Integer32,
apmExceptionResponsivenessComparison INTEGER,
apmExceptionResponsivenessThreshold Integer32,
apmExceptionUnsuccessfulException INTEGER,
apmExceptionOwner OwnerString,
apmExceptionStatus RowStatus
}
apmExceptionAppLocalIndex OBJECT-TYPE
SYNTAX AppLocalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The application who'se transactions will be monitored for
exceptions."
::= { apmExceptionEntry 1 }
apmExceptionIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
apmExceptionTable. Each such entry sets up thresholds for a
particular measurement of a particular application.
Note that even though the index of the apmExceptionTable
contains other objects (e.g. apmExceptionAppLocalIndex) that
may disambiguate apmExceptionEntries, no two
apmExceptionEntries may have the same value of apmExceptionIndex."
::= { apmExceptionEntry 2 }
apmExceptionResponsivenessComparison OBJECT-TYPE
SYNTAX INTEGER {
none(1),
greater(2),
less(3)
Steven Waldbusser Expires January 20, 2002 [Page 46]
Internet Draft APM MIB July 20, 2001
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this value is greater(2) or less(3), the associated
apmExceptionResponsivenessThreshold will be compared to this
value and an exception will be created if the responsiveness
is greater than the threshold (greater(2)) or less than the
threshold (less(3))."
::= { apmExceptionEntry 3 }
apmExceptionResponsivenessThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold that responsiveness metrics are compared to."
::= { apmExceptionEntry 4 }
apmExceptionUnsuccessfulException OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this value is on(2), an exception will be created if a
transaction of the associated type is unsuccessful."
::= { apmExceptionEntry 5 }
apmExceptionOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is
therefore using the resources assigned to it."
::= { apmExceptionEntry 6 }
apmExceptionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
Steven Waldbusser Expires January 20, 2002 [Page 47]
Internet Draft APM MIB July 20, 2001
"The status of this apmExceptionEntry."
::= { apmExceptionEntry 7 }
apmThroughputExceptionMinTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Because the responsiveness for throughput-oriented
transactions is divided by the elapsed time, it can be very
sensitive to short-term performance variations for
transactions that take a short period of time. For example,
when downloading a very short file, a single dropped packet
could double or triple the total response time.
Further, for very short transactions, the fixed transaction
costs (handshake, setup time, authentication, round-trip time)
may dominate the total response time for the transaction.
This object controls the minimum number of seconds that an
throughput-based transaction must exceed before an exception
can be generated for it. If this object is set to zero, then
all throughput-based transactions are candidates for
exceptions."
DEFVAL { 10 }
::= { apm 12 }
-- APM Notifications
apmNotifications OBJECT IDENTIFIER ::= { apm 13 }
apmTransactionResponsivenessAlarm NOTIFICATION-TYPE
OBJECTS { apmExceptionResponsivenessThreshold,
apmCurrentResponsiveness }
STATUS current
DESCRIPTION
"Notification sent when a transaction exceeds a threshold
defined in the apmException table. The index of the
included apmExceptionResponsivenessThreshold object identifies
the apmExceptionEntry that specified the threshold. The
apmCurrentResponsiveness variable identifies the actual
transaction and its responsiveness."
::= { apmNotifications 1 }
Steven Waldbusser Expires January 20, 2002 [Page 48]
Internet Draft APM MIB July 20, 2001
apmTransactionUnsuccessfulAlarm NOTIFICATION-TYPE
OBJECTS { apmExceptionResponsivenessThreshold }
STATUS current
DESCRIPTION
"Notification sent when a transaction is unsuccessful.
The index of the included apmExceptionResponsivenessThreshold
object identifies both the type of the transaction that caused
this notification as well as the apmExceptionEntry that
specified the threshold."
::= { apmNotifications 2 }
rmonConformance OBJECT IDENTIFIER ::= { rmon 20 }
apmCompliances OBJECT IDENTIFIER ::= { rmonConformance 11 }
apmGroups OBJECT IDENTIFIER ::= { rmonConformance 12 }
apmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to
the APM MIB"
MODULE -- this module
MANDATORY-GROUPS { apmAppDirectoryGroup, apmReportGroup }
::= { apmCompliances 1 }
apmAppDirectoryGroup OBJECT-GROUP
OBJECTS { apmAppDirectoryConfig,
apmAppDirectoryResponsivenessBoundary1,
apmAppDirectoryResponsivenessBoundary2,
apmAppDirectoryResponsivenessBoundary3,
apmAppDirectoryResponsivenessBoundary4,
apmAppDirectoryResponsivenessBoundary5,
apmAppDirectoryResponsivenessBoundary6,
apmNameMachineName, apmNameUserName,
apmBucketBoundaryLastChange }
STATUS current
DESCRIPTION
"The APM MIB directory of applications and application verbs."
::= { apmGroups 1 }
apmUserDefinedApplicationsGroup OBJECT-GROUP
OBJECTS { apmHttpFilterAppLocalIndex,
apmHttpFilterServerProtocol,
apmHttpFilterServerAddress, apmHttpFilterURLPath,
apmHttpFilterMatchType, apmHttpFilterRowStatus,
Steven Waldbusser Expires January 20, 2002 [Page 49]
Internet Draft APM MIB July 20, 2001
apmHttpIgnoreUnregisteredURLs, apmHttp4xxIsFailure,
apmUserDefinedAppParentIndex,
apmUserDefinedAppApplication }
STATUS current
DESCRIPTION
"Objects used for creating and managing user-defined
applications."
::= { apmGroups 2 }
apmReportGroup OBJECT-GROUP
OBJECTS { apmReportControlDataSource,
apmReportControlAggregationType,
apmReportControlInterval,
apmReportControlRequestedSize,
apmReportControlGrantedSize,
apmReportControlRequestedReports,
apmReportControlGrantedReports,
apmReportControlStartTime,
apmReportControlReportNumber,
apmReportControlInsertsDenied,
apmReportControlDroppedFrames,
apmReportControlOwner,
apmReportControlStatus,
apmReportTransactionCount,
apmReportSuccessfulTransactions,
apmReportResponsivenessMean,
apmReportResponsivenessMin,
apmReportResponsivenessMax,
apmReportResponsivenessB1,
apmReportResponsivenessB2,
apmReportResponsivenessB3,
apmReportResponsivenessB4,
apmReportResponsivenessB5,
apmReportResponsivenessB6,
apmReportResponsivenessB7 }
STATUS current
DESCRIPTION
"The apm report group controls the creation and retrieval of
reports that aggregate application performance."
::= { apmGroups 3 }
apmCurrentTransactionGroup OBJECT-GROUP
OBJECTS { apmCurrentResponsiveness,
apmCurrentSuccess }
STATUS current
Steven Waldbusser Expires January 20, 2002 [Page 50]
Internet Draft APM MIB July 20, 2001
DESCRIPTION
"The apm current transaction group contains statistics for
transactions that have not yet terminated."
::= { apmGroups 4 }
apmExceptionGroup OBJECT-GROUP
OBJECTS { apmExceptionResponsivenessComparison,
apmExceptionResponsivenessThreshold,
apmExceptionUnsuccessfulException,
apmExceptionOwner, apmExceptionStatus,
apmThroughputExceptionMinTime }
STATUS current
DESCRIPTION
"The apm exception group causes notifications to be sent
whenever transactions are detected that had poor availability
or responsiveness."
::= { apmGroups 5 }
apmNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { apmTransactionResponsivenessAlarm,
apmTransactionUnsuccessfulAlarm }
STATUS current
DESCRIPTION
"Notifications sent by an APM MIB agent."
::= { apmGroups 6 }
END
Steven Waldbusser Expires January 20, 2002 [Page 51]
Internet Draft APM MIB July 20, 2001
5. Security Considerations
This MIB contains network addresses, application usage
information, and conversation statistics. Data of this nature
may be considered sensitive in some environments. In such
environments the administrator may wish to restrict SNMP
access to the agent.
There are a number of management objects defined in this MIB
that have a MAX-ACCESS clause of read-write and/or read-
create. Such objects may be considered sensitive or
vulnerable in some network environments. The support for SET
operations in a non-secure environment without proper
protection can have a negative effect on network operations.
SNMPv1 by itself is not a secure environment. Even if the
network itself is secure (for example by using IPSec), even
then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the
objects in this MIB.
It is recommended that the implementors consider the security
features as provided by the SNMPv3 framework. Specifically,
the use of the User-based Security Model RFC 2574 [12] and the
View-based Access Control Model RFC 2575 [15] is recommended.
It is then a customer/user responsibility to ensure that the
SNMP entity giving access to an instance of this MIB, is
properly configured to give access to the objects only to
those principals (users) that have legitimate rights to indeed
GET or SET (change/create/delete) them.
Steven Waldbusser Expires January 20, 2002 [Page 52]
Internet Draft APM MIB July 20, 2001
6. References
[1] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing SNMP Management Frameworks",
RFC 2571, April 1999.
[2] Rose, M., and K. McCloghrie, "Structure and
Identification of Management Information for TCP/IP-based
Internets", STD 16, RFC 1155, May 1990.
[3] Rose, M., and K. McCloghrie, "Concise MIB Definitions",
STD 16, RFC 1212, March 1991.
[4] Rose, M., "A Convention for Defining Traps for use with
the SNMP", RFC 1215, March 1991.
[5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.
[6] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[7] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[8] Case, J., Fedor, M., Schoffstall, M., and J. Davin,
"Simple Network Management Protocol", STD 15, RFC 1157,
May 1990.
[9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901,
January 1996.
[10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1906, January 1996.
[11] Case, J., Harrington D., Presuhn R., and B. Wijnen,
"Message Processing and Dispatching for the Simple
Network Management Protocol (SNMP)", RFC 2572, April
1999.
Steven Waldbusser Expires January 20, 2002 [Page 53]
Internet Draft APM MIB July 20, 2001
[12] Blumenthal, U., and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", RFC 2574, April 1999.
[13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Protocol Operations for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1905, January 1996.
[14] Levi, D., Meyer, P., and B. Stewart, "SNMPv3
Applications", RFC 2573, April 1999.
[15] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC 2575, April 1999.
[16] McCloghrie, K. and M. Rose, Editors, "Management
Information Base for Network Management of TCP/IP-based
internets: MIB-II", STD 17, RFC 1213, Hughes LAN Systems,
Performance Systems International, March 1991.
[17] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB using SMIv2", RFC 2233, Cisco Systems, FTP Software,
November 1997.
[18] Waldbusser, S., "Remote Network Monitoring MIB", STD 59,
RFC 2819, Lucent Technologies, May 2000
[19] Waldbusser, S., "Token Ring Extensions to the Remote
Network Monitoring MIB", RFC 1513, Carnegie Mellon
University, September 1993.
[20] Waldbusser, S., "Remote Network Monitoring Management
Information Base Version 2 using SMIv2", RFC 2021,
International Network Services, January 1997.
[21] Waterman, R., Lahaye, B., Romascanu, D., and S.
Waldbusser, "Remote Network Monitoring MIB Extensions for
Switched Networks Version 1.0", RFC 2613, Allot Networks
Inc., Xylan Corp., Lucent Technologies, June 1999.
[22] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction to Version 3 of the Internet-standard
Network Management Framework", RFC 2570, April 1999.
Steven Waldbusser Expires January 20, 2002 [Page 54]
Internet Draft APM MIB July 20, 2001
[23] Kalbfleisch, C., Krupczak, C., Presuhn, R., and J.
Saperia, Application Management MIB, RFC 2564 May 1999.
7. Intellectual Property
The IETF takes no position regarding the validity or scope of
any intellectual property or other rights that might be
claimed to pertain to the implementation or use of the
technology described in this document or the extent to which
any license under such rights might or might not be available;
neither does it represent that it has made any effort to
identify any such rights. Information on the IETF's
procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11.
Copies of claims of rights made available for publication and
any assurances of licenses to be made available, or the result
of an attempt made to obtain a general license or permission
for the use of such proprietary rights by implementors or
users of this specification can be obtained from the IETF
Secretariat.
The IETF invites any interested party to bring to its
attention any copyrights, patents or patent applications, or
other proprietary rights which may cover technology that may
be required to practice this standard. Please address the
information to the IETF Executive Director.
8. Full Copyright Statement
Copyright (C) The Internet Society (2001). All Rights Reserved.
This document and translations of it may be copied and
furnished to others, and derivative works that comment on or
otherwise explain it or assist in its implementation may be
prepared, copied, published and distributed, in whole or in
part, without restriction of any kind, provided that the above
copyright notice and this paragraph are included on all such
copies and derivative works. However, this document itself
may not be modified in any way, such as by removing the
copyright notice or references to the Internet Society or
other Internet organizations, except as needed for the
purpose of developing Internet standards in which case the
procedures for copyrights defined in the Internet Standards
process must be followed, or as required to translate it into
Steven Waldbusser Expires January 20, 2002 [Page 55]
Internet Draft APM MIB July 20, 2001
languages other than English.
The limited permissions granted above are perpetual and will
not be revoked by the Internet Society or its successors or
assigns.
This document and the information contained herein is provided
on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE
USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
Steven Waldbusser Expires January 20, 2002 [Page 56]
Internet Draft APM MIB July 20, 2001
Table of Contents
1 Abstract .............................................. 1
2 The SNMP Management Framework ......................... 2
3 Overview .............................................. 4
3.1 Report Aggregation .................................. 6
3.2 Measurement Methodology ............................. 11
3.3 Structure of MIB .................................... 11
3.3.1 The APM Application Directory Group ............... 12
3.3.2 The APM User Defined Applications Group ........... 12
3.3.3 The APM Report Group .............................. 12
3.3.4 The APM Current Transaction Group ................. 12
3.3.5 The APM Exception Group ........................... 13
3.3.6 The APM Notification Group ........................ 13
4 Definitions ........................................... 14
5 Security Considerations ............................... 52
6 References ............................................ 53
7 Intellectual Property ................................. 55
8 Full Copyright Statement .............................. 55
Steven Waldbusser Expires January 20, 2002 [Page 57]
