Secure Inter-Domain Routing M. Lepinski
Internet-Draft A. Chi
Intended status: Standards Track S. Kent
Expires: November 9, 2011 BBN
May 9, 2011
Signed Object Template for the Resource Public Key Infrastructure
draft-ietf-sidr-signed-object-04.txt
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 16, 2011.
Copyright Notice
Copyright (c) 2011 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Abstract
This document defines a generic profile for signed objects used in
the Resource Public Key Infrastructure (RPKI). These RPKI signed
objects make use of Cryptographic Message Syntax (CMS) as a standard
encapsulation format.
Lepinski, et al. Expires November 9, 2011 [Page 1]
Internet-Draft RPKI Signed Object Template May 9, 2011
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2. Note on Algorithms . . . . . . . . . . . . . . . . . . . . 3
2. Signed Object Syntax . . . . . . . . . . . . . . . . . . . . . 4
2.1. Signed-Data Content Type . . . . . . . . . . . . . . . . . 4
2.1.1. version . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1.2. digestAlgorithms . . . . . . . . . . . . . . . . . . . 5
2.1.3. encapContentInfo . . . . . . . . . . . . . . . . . . . 5
2.1.3.1. eContentType . . . . . . . . . . . . . . . . . . . 5
2.1.3.2. eContent . . . . . . . . . . . . . . . . . . . . . 5
2.1.4. certificates . . . . . . . . . . . . . . . . . . . . . 5
2.1.5. crls . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1.6. signerInfos . . . . . . . . . . . . . . . . . . . . . . 6
2.1.6.1. version . . . . . . . . . . . . . . . . . . . . . . 6
2.1.6.2. sid . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1.6.3. digestAlgorithm . . . . . . . . . . . . . . . . . . 6
2.1.6.4. signedAttrs . . . . . . . . . . . . . . . . . . . . 6
2.1.6.4.1. Content-Type Attribute . . . . . . . . . . . . 7
2.1.6.4.2. Message-Digest Attribute . . . . . . . . . . . 7
2.1.6.4.3. SigningTime Attribute . . . . . . . . . . . . . 7
2.1.6.4.4. BinarySigningTime Attribute . . . . . . . . . . 8
2.1.6.5. signatureAlgorithm . . . . . . . . . . . . . . . . 8
2.1.6.6. signature . . . . . . . . . . . . . . . . . . . . . 8
2.1.6.7. unsignedAttrs . . . . . . . . . . . . . . . . . . . 8
3. Signed Object Validation . . . . . . . . . . . . . . . . . . . 9
4. Definition of Specific Signed Objects . . . . . . . . . . . . . 10
5. Security Considerations . . . . . . . . . . . . . . . . . . . . 11
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 11
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 11
8. Normative References . . . . . . . . . . . . . . . . . . . . . 11
9. Informative References . . . . . . . . . . . . . . . . . . . . 12
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 12
Lepinski, et al. Expires November 9, 2011 [Page 2]
Internet-Draft RPKI Signed Object Template May 9, 2011
1. Introduction
The purpose of the Internet IP Address and Autonomous System (AS)
Number Resource Public Key Infrastructure (RPKI) system is to support
assertions by current resource holders of IP (v4 and v6) address
space and AS numbers, based on the records of the organizations that
act as Certification Authorities (CAs). IP address and AS number
resource information is carried in X.509 certificates via RFC 3779
extensions [I-D.sidr-res-certs]. Other information assertions about
resources are expressed via digitally signed, non-X.509 data
structures that are referred to as "signed objects" in the RPKI
context [I-D.sidr-arch]. This document standardizes a template for
specifying signed objects that can be validated using the RPKI.
RPKI signed objects make use of Cryptographic Message Syntax (CMS)
[RFC5652] as a standard encapsulation format. CMS was chosen to take
advantage of existing open source software available for processing
messages in this format. RPKI signed objects adhere to a profile
(specified in Section 2) of the CMS signed-data object.
The template defined in this document for RPKI signed objects is not
a complete specification for any particular type of signed object,
and instead includes only the items which are common to all RPKI
signed objects. That is, fully specifying a particular type of signed
object requires an additional document that specifies the details
which are specific to a particular type of signed object. Such
details include Abstract Syntax Notation One (ASN.1) [X.208-88]
syntax for the object's payload and any additional steps required to
validate the particular type of signed object. Section 4 describes in
more detail the additional pieces that must be specified in order to
define a new type of RPKI signed object that uses this template.
Additionally, see [I-D.sidr-roa-format] for an example of a document
that uses this template to specify a particular type of signed
object, the Route Origination Authorization.
1.1. Terminology
It is assumed that the reader is familiar with the terms and concepts
described in "Internet X.509 Public Key Infrastructure Certificate
and Certificate Revocation List (CRL) Profile" [RFC5280] and "X.509
Extensions for IP Addresses and AS Identifiers" [RFC3779], and
"Cryptographic Message Syntax (CMS)" [RFC5652].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
1.2. Note on Algorithms
Lepinski, et al. Expires November 9, 2011 [Page 3]
Internet-Draft RPKI Signed Object Template May 9, 2011
Cryptographic Message Syntax is a general format capable of
accommodating a wide variety of signature and digest algorithms. The
algorithms used in the RPKI (and associated key sizes) are specified
in [I-D.sidr-rpki-algs].
2. Signed Object Syntax
The RPKI signed object is a profile of the Cryptographic Message
Syntax (CMS) [RFC5652] signed-data object, with the restriction that
RPKI signed objects MUST be encoded using the ASN.1 Distinguished
Encoding Rules (DER) [X.509-88].
The general format of a CMS object is:
ContentInfo ::= SEQUENCE {
contentType ContentType,
content [0] EXPLICIT ANY DEFINED BY contentType }
ContentType ::= OBJECT IDENTIFIER
The ContentType is the signed-data type of id-data, namely the id-
signedData OID, 1.2.840.113549.1.7.2. [RFC5652]
2.1. Signed-Data Content Type
According to the CMS standard, the signed-data content type is the
ASN.1 type SignedData:
SignedData ::= SEQUENCE {
version CMSVersion,
digestAlgorithms DigestAlgorithmIdentifiers,
encapContentInfo EncapsulatedContentInfo,
certificates [0] IMPLICIT CertificateSet OPTIONAL,
crls [1] IMPLICIT RevocationInfoChoices OPTIONAL,
signerInfos SignerInfos }
DigestAlgorithmIdentifiers ::= SET OF DigestAlgorithmIdentifier
SignerInfos ::= SET OF SignerInfo
Additionally, the SignerInfos set MUST contain only a single
SignerInfo object.
2.1.1. version
The version is the syntax version number. It MUST be 3,
corresponding to the signerInfo structure having version number 3.
Lepinski, et al. Expires November 9, 2011 [Page 4]
Internet-Draft RPKI Signed Object Template May 9, 2011
2.1.2. digestAlgorithms
The digestAlgorithms set contains the OIDs of the digest algorithm(s)
used in signing the encapsulated content. This set MUST contain
exactly one digest algorithm OID, and the OID MUST be selected from
those specified in [I-D.sidr-rpki-algs].
2.1.3. encapContentInfo
encapContentInfo is the signed content, consisting of a content type
identifier and the content itself. The encapContentInfo represents
the payload of the RPKI signed object.
EncapsulatedContentInfo ::= SEQUENCE {
eContentType ContentType,
eContent [0] EXPLICIT OCTET STRING OPTIONAL }
ContentType ::= OBJECT IDENTIFIER
2.1.3.1. eContentType
This field is left undefined by this profile. The eContentType is an
OID specifying the type of payload in this signed object and MUST be
specified by the Internet standards track document that defines the
object.
2.1.3.2. eContent
This field is left undefined by this profile. The eContent is the
payload of the signed object and MUST be specified by the Internet
standards track document that defines the RPKI object.
Note that the signed object profile does not provide version numbers
for signed objects. Therefore, in order to facilitate transition to
new versions of the signed objects over time, it is RECOMMENDED that
signed objects using this profile include a version number within
their eContent.
2.1.4. certificates
The certificates field MUST be included, and MUST contain exactly one
certificate, the RPKI End Entity (EE) certificate needed to validate
this signed object.
2.1.5. crls
The crls field MUST be omitted.
Lepinski, et al. Expires November 9, 2011 [Page 5]
Internet-Draft RPKI Signed Object Template May 9, 2011
2.1.6. signerInfos
SignerInfo is defined in CMS as:
SignerInfo ::= SEQUENCE {
version CMSVersion,
sid SignerIdentifier,
digestAlgorithm DigestAlgorithmIdentifier,
signedAttrs [0] IMPLICIT SignedAttributes OPTIONAL,
signatureAlgorithm SignatureAlgorithmIdentifier,
signature SignatureValue,
unsignedAttrs [1] IMPLICIT UnsignedAttributes OPTIONAL }
2.1.6.1. version
The version number MUST be 3, corresponding with the choice of
SubjectKeyIdentifier for the sid.
2.1.6.2. sid
The sid is defined as:
SignerIdentifier ::= CHOICE {
issuerAndSerialNumber IssuerAndSerialNumber,
subjectKeyIdentifier [0] SubjectKeyIdentifier }
For RPKI signed objects, the sid MUST be the SubjectKeyIdentifier
that appears in the EE certificate carried in the CMS certificates
field.
2.1.6.3. digestAlgorithm
The digestAlgorithm MUST consist of the OID of a digest algorithm
that conforms to the RPKI Algorithms and Key Size Profile
specification [I-D.sidr-rpki-algs].
2.1.6.4. signedAttrs
The signedAttrs is defined as:
SignedAttributes ::= SET SIZE (1..MAX) OF Attribute
Attribute ::= SEQUENCE {
attrType OBJECT IDENTIFIER,
attrValues SET OF AttributeValue }
AttributeValue ::= ANY
Lepinski, et al. Expires November 9, 2011 [Page 6]
Internet-Draft RPKI Signed Object Template May 9, 2011
The signedAttr element MUST be present and MUST include the content-
type and message-digest attributes [RFC5652]. The signer MAY also
include the signing-time signed attribute [RFC5652], the binary-
signing-time signed attribute [RFC6019], or both signing-time
attributes. Other signed attributes MUST NOT be included.
The signedAttr MUST include only a single instance of any particular
attribute. Additionally, even though the syntax allows for a SET OF
AttributeValue, in an RPKI signed object the attrValues MUST consist
of only a single AttributeValue.
2.1.6.4.1. Content-Type Attribute
The ContentType attribute MUST be present. The attrType OID for the
ContentType attribute is 1.2.840.113549.1.9.3.
The attrValues for the ContentType attribute MUST match the
eContentType in the EncapsulatedContentInfo. Thus, attrValues MUST
contain the OID that specifies the payload type of the specific RPKI
signed object carried in the CMS signed data structure.
2.1.6.4.2. Message-Digest Attribute
The MessageDigest Attribute MUST be present. The attrType OID for
the MessageDigest Attribute is 1.2.840.113549.1.9.4.
The attrValues for the MessageDigest attribute contains the output of
the digest algorithm applied to the content being signed, as
specified in Section 5.4 of [RFC5652].
2.1.6.4.3. SigningTime Attribute
The SigningTime Attribute MAY be present. Note that the presence or
absence of the SigningTime attribute MUST NOT affect the validity of
the signed object (as specified in Section 3). The attrType OID for
the SigningTime attribute is 1.2.840.113549.1.9.5.
id-signingTime OBJECT IDENTIFIER ::= { iso(1) member-body(2)
us(840) rsadsi(113549) pkcs(1) pkcs9(9) 5 }
The attrValues for the SigningTime attribute is defined as:
SigningTime ::= Time
Time ::= CHOICE {
utcTime UTCTime,
generalizedTime GeneralizedTime }
Lepinski, et al. Expires November 9, 2011 [Page 7]
Internet-Draft RPKI Signed Object Template May 9, 2011
The Time element specifies the time, based on the local system clock,
at which the digital signature was applied to the content.
The definition of Time matches the one specified in the 1997 version
of X.509. Additional information regarding the use of UTCTime and
GeneralizedTime can be found in [RFC5652].
2.1.6.4.4. BinarySigningTime Attribute
The BinarySigningTime Attribute MAY be present. Note that the
presence or absence of the BinarySigningTime attribute MUST NOT
affect the validity of the signed object (as specified in Section 3).
The attrType OID for the BinarySigningTime attribute is
1.2.840.113549.1.9.16.2.46.
id-aa-binarySigningTime OBJECT IDENTIFIER ::= { iso(1)
member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs9(9)
smime(16) aa(2) 46 }
The attrValues for the SigningTime attribute is defined as:
BinarySigningTime ::= BinaryTime
BinaryTime ::= INTEGER (0..MAX)
The BinaryTime element specifies the time, based on the local system
clock, at which the digital signature was applied to the content. The
precise definition of the BinaryTime element can be found in
[RFC6019].
2.1.6.5. signatureAlgorithm
The signatureAlgorithm MUST conform to the RPKI Algorithms and Key
Size Profile specification [I-D.sidr-rpki-algs].
2.1.6.6. signature
The signature value is defined as:
SignatureValue ::= OCTET STRING
The signature characteristics are defined by the digest and signature
algorithms.
2.1.6.7. unsignedAttrs
unsignedAttrs MUST be omitted.
Lepinski, et al. Expires November 9, 2011 [Page 8]
Internet-Draft RPKI Signed Object Template May 9, 2011
3. Signed Object Validation
Before a relying party can use a signed object, the relying party
MUST validate the signed object by verifying that all of the
following conditions hold. A relying party may perform these checks
in any order. Note that these checks are necessary but not
sufficient: in general, further validation MUST be performed based on
the specific type of signed object.
1. The signed object syntax complies with this specification. In
particular, that each of the following is true:
a. The contentType of the CMS object is SignedData (OID
1.2.840.113549.1.7.2)
b. The version of the SignedData object is 3.
c. The certificates field in the SignedData object is present
and contains one EE certificate, the SubjectKeyIdentifier
field of which matches the sid field of the SignerInfo
object.
d. The crls field in the SignedData object is omitted.
e. The version of the SignerInfo is 3.
f. The signedAttrs field in the SignerInfo object is present and
contains both the ContentType attribute (OID
1.2.840.113549.1.9.3) and the MessageDigest attribute (OID
1.2.840.113549.1.9.4).
g. The signedAttrs field in the SignerInfo object does not
contain any attributes other than the following four: the
ContentType attribute (OID 1.2.840.113549.1.9.3), the
MessageDigest attribute (OID 1.2.840.113549.1.9.4), the
SigningTime attribute (OID 1.2.840.113549.1.9.5), and the
BinarySigningTime attribute (OID 1.2.840.113549.1.9.16.2.46).
Note that the SigningTime and BinarySigningTime attributes
MAY be present, but are not required.
h. The eContentType in the EncapsulatedContentInfo is an OID
that matches the attrValues in the ContentType attribute.
i. The unsignedAttrs field in the SignerInfo object is omitted.
j. The digestAlgorithm in the SignedData and SignerInfo objects
conforms to the RPKI Algorithms and Key Size Profile
specification [I-D.sidr-rpki-algs].
Lepinski, et al. Expires November 9, 2011 [Page 9]
Internet-Draft RPKI Signed Object Template May 9, 2011
k. The signatureAlgorithm in the SignerInfo object conforms to
the RPKI Algorithms and Key Size Profile specification
[I-D.sidr-rpki-algs].
l. The signed object is DER encoded.
2. The public key of the EE certificate (contained within the CMS
signed-data object) can be used to successfully verify the
signature on the signed object.
3. The EE certificate (contained within the CMS signed-data object)
is a valid EE certificate in the RPKI as specified by [I-D.sidr-
res-certs]. In particular, there exists a valid certification
path from a trust anchor to this EE certificate.
If the above procedure indicates that the signed object is invalid,
then the signed object MUST be discarded and treated as though no
signed object were present. If all of the conditions above are
true, then the signed object may be valid. The relying party MUST
then perform any additional validation steps required for the
particular type of signed object.
Note that a previously valid signed object will cease to be valid
when the associated EE certificate ceases to be valid (for example,
when the end of the certificate's validity period is reached, or when
the certificate is revoked by the authority that issued it). See [I-
D.sidr-res-certs] for a complete specification of resource
certificate validity.
4. Definition of Specific Signed Objects
Each RPKI signed object MUST be defined in an Internet standards
track document based on this profile, by specifying the following
data elements and validation procedure:
1. eContentType: A single OID to be used for both the eContentType
field and the Content-Type attribute. This OID uniquely
identifies the type of signed object.
2. eContent: Define the syntax for the eContent field in
encapContentInfo. This is the payload that contains the data
specific to a given type of signed object.
3. Additional Validation: Define a set of additional validation
steps for the specific signed object. Before using this specific
signed object, a relying party MUST perform both the generic
validation steps in Section 3 above, as well as these additional
steps.
Lepinski, et al. Expires November 9, 2011 [Page 10]
Internet-Draft RPKI Signed Object Template May 9, 2011
5. Security Considerations
There is no assumption of confidentiality for the data in an RPKI
signed object. The integrity and authenticity of each signed
object is based on the verification of a digital signature for
the object, and on the validation of the EE certificate used to
perform that verification. It is anticipated that signed objects
will be stored in repositories that will be publicly accessible.
Since RPKI signed objects make use of CMS as an encapsulation
format, the security considerations for CMS apply [RFC5652].
6. IANA Considerations
IANA is requested to create a registry of signed objects types
that utilize the template defined in this document. This registry
shall contain three fields, an informal name for the signed
object, the OID for the eContentType of the signed object, and a
specification pointer that references the RFC in which the signed
object is specified. The entries in this registry shall be
managed by IETF Standards Action.
The registry shall be initially populated with the following two
entries.
Name | OID | Specification
----------------------------------------------------------------
ROA | 1.2.840.113549.1.9.16.1.24 | I-D.sidr-roa-format
Manifest | 1.2.840.113549.1.9.16.1.26 | I-D.sidr-rpki-manifests
Note that when draft-ietf-sidr-roa-format and draft-ietf-sidr-
rpki-manifests are published as RFCs, IANA is requested to
replace the Internet Draft names in the registry with the RFC
numbers of corresponding RFCs.
7. Acknowledgements
The authors wish to thank Charles Gardiner, Russ Housley, and
Derek Kong for their help and contributions. Additionally, the
authors would like to thank Rob Austein, Roque Gagliano, Danny
McPherson, Sean Turner, and Sam Weiler for their careful reviews
and helpful comments.
8. Normative References
[I-D.sidr-res-certs] Huston, G., Michaelson, G., and R. Loomans, "A
Profile for X.509 PKIX Resource Certificates",
draft-ietf-sidr-res-certs (work in progress), December
Lepinski, et al. Expires November 9, 2011 [Page 11]
Internet-Draft RPKI Signed Object Template May 9, 2011
2010.
[I-D.sidr-rpki-algs] Huston, G., "A Profile for Algorithms and Key
Sizes for use in the Resource Public Key Infrastructure",
draft-ietf-sidr-rpki-algs (work in progress), November
2010.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC3779] Lynn, C., Kent, S., and K. Seo, "X.509 Extensions for IP
Addresses and AS Identifiers", RFC 3779, June 2004.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile", RFC 5280, May 2008.
[RFC5652] Housley, R., "Cryptographic Message Syntax (CMS)", RFC
5652, September 2009.
[X.208-88] CCITT. Recommendation X.208: Specification of Abstract
Syntax Notation One (ASN.1), 1988.
[X.509-88] CCITT. Recommendation X.509: The Directory Authentication
Framework, 1988.
9. Informative References
[I-D.sidr-arch] Lepinski, M. and S. Kent, "An Infrastructure to
Support Secure Internet Routing", draft-ietf-sidr-arch
(work in progress), November 2010.
[I-D.sidr-roa-format] Lepinski, M., Kent, S., and D. Kong, "A Profile
for Route Origin Authorizations (ROAs)",
draft-ietf-sidr-roa-format (work in progress), November
2010.
[RFC6019] Housley, R., "BinaryTime: An Alternate Format for
Representing Date and Time in ASN.1", RFC 6019, September
2010.
Authors' Addresses
Matt Lepinski
BBN Technologies
10 Moulton Street
Lepinski, et al. Expires November 9, 2011 [Page 12]
Internet-Draft RPKI Signed Object Template May 9, 2011
Cambridge MA 02138
Email: mlepinski@bbn.com
Andrew Chi
BBN Technologies
10 Moulton Street
Cambridge MA 02138
Email: achi@bbn.com
Stephen Kent
BBN Technologies
10 Moulton Street
Cambridge MA 02138
Email: kent@bbn.com
Lepinski, et al. Expires November 9, 2011 [Page 13]