Network Working Group C. Wendt
Internet-Draft Somos Inc.
Intended status: Standards Track J. Peterson
Expires: 8 September 2022 Neustar Inc.
7 March 2022
SIP Call-Info Parameters for Rich Call Data
draft-ietf-sipcore-callinfo-rcd-04
Abstract
This document describes a SIP Call-Info header field usage defined to
include rich data associated with the identity of the calling party
that can be rendered to a called party for providing more useful
information about the caller or the specific reason for the call.
This includes extended comprehensive information about the caller
such as what a jCard object can represent for describing the calling
party or other call specific information such as describing the
reason or intent of the call. The elements defined for this purpose
are intended to be extensible to accommodate related information
about calls that helps people decide whether to pick up the phone and
additionally, with the use of jCard and other elements, to be
compatible with the STIR/PASSporT Rich Call Data framework.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 8 September 2022.
Copyright Notice
Copyright (c) 2022 IETF Trust and the persons identified as the
document authors. All rights reserved.
Wendt & Peterson Expires 8 September 2022 [Page 1]
Internet-Draft Call-Info Rich Call Data March 2022
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. "jcard" Call-Info Token . . . . . . . . . . . . . . . . . . . 5
5. "call-reason" Call-Info Parameter . . . . . . . . . . . . . . 6
6. "jmin" Call-Info Token . . . . . . . . . . . . . . . . . . . 7
7. Usage of jCard and property specific usage . . . . . . . . . 9
7.1. Usage of URIs in jCard . . . . . . . . . . . . . . . . . 9
7.2. Usage of multimedia data in jCard . . . . . . . . . . . . 9
7.3. Cardinality . . . . . . . . . . . . . . . . . . . . . . . 10
7.4. Identification properties . . . . . . . . . . . . . . . . 11
7.4.1. "fn" property . . . . . . . . . . . . . . . . . . . . 11
7.4.2. "n" property . . . . . . . . . . . . . . . . . . . . 11
7.4.3. "nickname" property . . . . . . . . . . . . . . . . . 12
7.4.4. "photo" property . . . . . . . . . . . . . . . . . . 12
7.5. Delivery Addressing Properties . . . . . . . . . . . . . 12
7.5.1. "adr" property . . . . . . . . . . . . . . . . . . . 12
7.6. Communications Properties . . . . . . . . . . . . . . . . 13
7.6.1. "tel" property . . . . . . . . . . . . . . . . . . . 13
7.6.2. "email" property . . . . . . . . . . . . . . . . . . 14
7.6.3. "lang" property . . . . . . . . . . . . . . . . . . . 14
7.7. Geographical Properties . . . . . . . . . . . . . . . . . 14
7.7.1. "tz" property . . . . . . . . . . . . . . . . . . . . 14
7.7.2. "geo" property . . . . . . . . . . . . . . . . . . . 15
7.8. Organizational Properties . . . . . . . . . . . . . . . . 15
7.8.1. "title" property . . . . . . . . . . . . . . . . . . 15
7.8.2. "role" property . . . . . . . . . . . . . . . . . . . 15
7.8.3. "logo" property . . . . . . . . . . . . . . . . . . . 16
7.8.4. "org" property . . . . . . . . . . . . . . . . . . . 16
7.9. Explanatory Properties . . . . . . . . . . . . . . . . . 16
7.9.1. "categories" property . . . . . . . . . . . . . . . . 16
7.9.2. "note" property . . . . . . . . . . . . . . . . . . . 17
7.9.3. "sound" property . . . . . . . . . . . . . . . . . . 17
7.9.4. "uid" property . . . . . . . . . . . . . . . . . . . 17
7.9.5. "url" property . . . . . . . . . . . . . . . . . . . 18
7.9.6. "version" property . . . . . . . . . . . . . . . . . 18
8. Extension of jCard . . . . . . . . . . . . . . . . . . . . . 18
Wendt & Peterson Expires 8 September 2022 [Page 2]
Internet-Draft Call-Info Rich Call Data March 2022
9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 19
10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 19
10.1. SIP Call-Info Header Field Purpose Token Request . . . . 19
10.2. SIP Call-Info Header Field Purpose Token Request . . . . 19
11. Security Considerations . . . . . . . . . . . . . . . . . . . 19
12. Normative References . . . . . . . . . . . . . . . . . . . . 19
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 21
1. Introduction
Traditional telephone network signaling protocols have long supported
delivering a 'calling name' from the originating side, though in
practice, the terminating side is often left to derive a name from
the calling party number by consulting a local address book or an
external database. SIP similarly can carry a 'display-name' in the
From header field value from the originating to terminating side,
though it is an unsecured field that is not commonly trusted and
often replaced or ignored. The same is often true of information in
the Call-Info header fields.
To allow calling parties to initiate, and called parties to receive,
a more comprehensive, deterministic, and extensible rich call data
for incoming calls, we describe new tokens for the SIP [RFC3261]
Call-Info header field and a corresponding "purpose" parameter. We
also define a new parameter of Call-Info designed for carrying a
"reason" value. For this document, depending on the policies of the
communications system, calling parties could either be the end user
device or an originating service provider, and called parties could
also similarly be an end user device or the terminating service
provider acting on behalf of the recipient of the call.
Used on its own, this specification assumes that the called party
user agent can trust the SIP network or the SIP provider to deliver
the correct rich call data (RCD) information. This may not always be
the case and thus, the entity inserting the Call-Info header field
and the UAS relying on it SHOULD be part of the same trust domain
[RFC3324]. Alternatively, and likely the recommended approach, the
entity inserting the Call-Info header field should also sign the
caller information via STIR mechanisms [RFC8224] and specifically
through the [I-D.ietf-stir-passport-rcd]. This STIR signature would
likely be provided by the caller itself or the originating service
provider using an authoritative signature to authenticate the
information is from the originator and hasn't been tampered with in
transmission.
[RFC7852] provides a means of carrying additional data about callers
for the purposes of emergency services (especially its Section 4.4
"Owner/Subscriber" information). This specification provides an
Wendt & Peterson Expires 8 September 2022 [Page 3]
Internet-Draft Call-Info Rich Call Data March 2022
overlapping functionality for non-emergency cases. Rather than
overloading its "EmergencyCallData" Call-Info "purpose" parameter
value, this document defines a separate "purpose" parameter for the
more generic delivery of information via jCard [RFC7095]. This
document borrows from [RFC7852] the capability to carry a data
structure as a body, through the use of the "cid" URI scheme
[RFC2392].
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
3. Overview
The Call-Info header field, defined in [RFC3261] Section 20.9,
defines a purpose parameter currently with "info", "icon", and "card"
tokens. This document defines two new purpose values and one new
generic parameter for Call-Info.
The first purpose value defined is "jcard" and is used to associate
rich call data related to the identity of the calling party in the
form of a jCard [RFC7095]. While there is a "card" token that is
already defined with similar purpose, there are two primary reasons
for the definition and usage of jCard and the use of JSON over the
XML based vCard [RFC2426]. First, JSON has become the default and is
generally the widely accepted optimally supported format for
transmission, parsing, and manipulation of data on IP networks.
Second, jCard has also been defined in [I-D.ietf-stir-passport-rcd]
and has been adopted by PASSporT [RFC8225] because of the usage of
JSON Web Tokens (JWT) [RFC7519].
A generic parameter for "call-reason" is to be used to provide a
string or other object that is used to convey the intent or reason
the caller is calling to help the called party understand better the
context of the call and why they may want to answer the call.
The second purpose value defined is "jmin" and is intended to be a
minimal call-info URI specifically for purposes where call-info does
not point to any structured information via URI, but is used to carry
parameters either defined in this document or future documents.
Wendt & Peterson Expires 8 September 2022 [Page 4]
Internet-Draft Call-Info Rich Call Data March 2022
4. "jcard" Call-Info Token
The use of the new Call-Info Token "jcard" is for the purpose of
supporting RCD associated with the identity of a calling party in a
SIP call [RFC3261] Section 20.9. The format of a Call-Info header
field when using the "jcard" is as follows.
The Call-Info header field is defined to include a URI, where here
the resource pointed to by the URI is a jCard JSON object [RFC7095].
The MIME media type set for the JSON text MUST be set as application/
json with a default encoding of UTF-8 [RFC4627]. A jCard also MAY be
carried in the body of the SIP request bearing this Call-Info via the
"cid" URI scheme [RFC2392]. Alternatively, the URI MUST define the
use HTTPS or a transport that can validate the integrity of the
source of the resource as well as the transport channel through which
the resource is retrieved.
An example of a Call-Info header field is:
Call-Info: <https://example.com/qbranch.json>;purpose=jcard
An example contents of a URL linked jCard JSON file is shown as
follows:
["vcard",
[
["version",{},"text","4.0"],
["fn",{},"text","Q Branch"],
["org",{},"text","MI6;Q Branch Spy Gadgets"],
["photo",{},"uri","https://example.com/photos/q-256x256.png"],
["logo",{},"uri","https://example.com/logos/mi6-256x256.jpg"],
["logo",{},"uri","https://example.com/logos/mi6-64x64.jpg"]
]
]
An example SIP INVITE using the "cid" URI scheme is as follows.
Wendt & Peterson Expires 8 September 2022 [Page 5]
Internet-Draft Call-Info Rich Call Data March 2022
INVITE sip:alice@example.com SIP/2.0
Via: SIP/2.0/TLS pc33.atlanta.example.com;branch=z9hG4bKnashds8
To: Alice <sip:alice@example.com>
From: Bob <sip:12155551000@example.com;user=phone>;tag=1928301774>
Call-ID: a84b4c76e66710
Call-Info: <cid:12155551000@example.com>;purpose=jcard;call-reason= \
"Rendezvous for Little Nellie"
CSeq: 314159 INVITE
Max-Forwards: 70
Date: Fri, 25 Sep 2015 19:12:25 GMT
Contact: <sip:12155551000@gateway.example.com>
Content-Type: multipart/mixed; boundary=boundary1
Content-Length: ...
--boundary1
Content-Type: application/sdp
v=0
o=UserA 2890844526 2890844526 IN IP4 pc33.atlanta.example.com
s=Session SDP
c=IN IP4 pc33.atlanta.example.com
t=0 0
m=audio 49172 RTP/AVP 0
a=rtpmap:0 PCMU/8000
--boundary1
Content-Type: application/vcard+json
Content-ID: <12155551000@example.com>
["vcard",[["version",{},"text","4.0"],["fn",{},"text","Q Branch"],
["org",{},"text","MI6;Q Branch Spy Gadgets"],["photo",{},"uri","ht
tps://example.com/photos/quartermaster-256x256.png"],["logo",{},"u
ri","https://example.com/logos/mi6-256x256.jpg"],["logo",{},"uri",
"https://example.com/logos/mi6-64x64.jpg"]]]
5. "call-reason" Call-Info Parameter
This specification also defines a parameter of the Call-Info header
called "call-reason". The "call-reason" parameter is intended to
convey a short textual message suitable for display to an end user
during call alerting. As a general guideline, this message SHOULD be
no longer than 64 characters; displays that support this
specification may be forced to truncate messages that cannot fit onto
a screen. This message conveys the caller's intention in contacting
the callee. It is an optional parameter, and the sender of a SIP
request cannot guarantee that its display will be supported by the
Wendt & Peterson Expires 8 September 2022 [Page 6]
Internet-Draft Call-Info Rich Call Data March 2022
terminating endpoint. The manner in which this reason is set by the
caller is outside the scope of this specification.
One alternative approach would be to use the baseline [RFC3261]
Subject header field value to convey the reason for the call.
Because the Subject header has seen little historical use in SIP
implementations, however, and its specification describes its
potential use in filtering, it seems more prudent to define a new
means of carrying a call reason indication.
An example of a Call-Info header field value with the "call-reason"
parameter follows:
Call-Info: <https://example.com/jbond.json>;purpose=jcard;
call-reason="For your ears only"
Refer to the next section that extends call-reason and, in
particular, discusses reasoning for the use of "call-reason"
parameter versus considering "jinfo" with an included "call-reason"
key value.
6. "jmin" Call-Info Token
This specification defines a token for the Call-Info header field
called "jmin". The "jmin" call-info URI is intended to address the
need for scenarios where there it is not needed to use the URI value
of call-info but only necessary to use defined call-info parameters,
one example being the "call-reason" parameter defined in this
document. The URI referenced value by "jmin" is defined as a minimal
JSON formatted object that MUST be the specific value "{}". The JSON
object "{}" is a valid JSON object per [RFC8259] but specifically
contains no keys or values. The MIME media type for this minimal
JSON object text MUST be set as application/json with a default
encoding of UTF-8 [RFC4627]. The "jmin" minimal JSON object string
MAY be carried in the body of the SIP request bearing this Call-Info
via the "cid" URI scheme [RFC2392]. Alternatively, the URI MUST
define the use HTTPS or a transport that can validate the integrity
of the source of the resource as well as the transport channel
through which the resource is retrieved.
We define this minimal JSON object for the express purpose of being a
valid URI that will not break implementations that are not
implementing this specification that reference the URI per procedures
defined in [RFC3261] Section 20.9. However, for implementations that
do support this specification, because the value referenced by the
URI MUST be "{}", as an optimization, implementations of this
specification MAY consider it a shortcut to not reference the URI and
trust that the value referenced will always be "{}".
Wendt & Peterson Expires 8 September 2022 [Page 7]
Internet-Draft Call-Info Rich Call Data March 2022
An example of a Call-Info header field using "jmin" purpose and call-
reason parameter is:
Call-Info: <https://example.com/min.json>;purpose=jmin;
call-reason="For your ears only"
The resource referenced by the URL for the above example would be a
file containing:
{}
An example SIP INVITE using the "cid" URI scheme equivalent to the
above example is as follows.
INVITE sip:alice@example.com SIP/2.0
Via: SIP/2.0/TLS pc33.atlanta.example.com;branch=z9hG4bKnashds8
To: Alice <sip:alice@example.com>
From: Bob <sip:12155551000@example.com;user=phone>;tag=1928301774>
Call-ID: a84b4c76e66710
Call-Info: <cid:12155551000@example.com>;purpose=jmin;call-reason=
"For your ears only"
CSeq: 314159 INVITE
Max-Forwards: 70
Date: Fri, 25 Sep 2015 19:12:25 GMT
Contact: <sip:12155551000@gateway.example.com>
Content-Type: multipart/mixed; boundary=boundary1
Content-Length: ...
--boundary1
Content-Type: application/sdp
v=0
o=UserA 2890844526 2890844526 IN IP4 pc33.atlanta.example.com
s=Session SDP
c=IN IP4 pc33.atlanta.example.com
t=0 0
m=audio 49172 RTP/AVP 0
a=rtpmap:0 PCMU/8000
--boundary1
Content-Type: application/json
Content-ID: <12155551000@example.com>
{}
Wendt & Peterson Expires 8 September 2022 [Page 8]
Internet-Draft Call-Info Rich Call Data March 2022
7. Usage of jCard and property specific usage
Beyond the definition of the specific properties or JSON arrays
associated with each property. This specification defines a few
rules above and beyond [RFC7095] specific to the use of jCard for
Call-Info and Rich Call Data making sure there is a minimum level of
supported properties that every implementation of this specification
should adhere to. This includes support for interpreting the value
of this property and the ability to render in some appropriate form
the display capabilities of common telephone devices, as well as
apps, and also includes requirements specific to either textual
displays and graphics capable displays.
7.1. Usage of URIs in jCard
When one or more URIs are used in a jCard, it is important to note
that any URI referenced data, with the exception of the top-level
usage of "jcl" as a URI to the jCard itself (unless updated by any
future extensions of this specification) MUST NOT contain any URI
references. In other words, the jCard can have URI references as
defined in the jCard specification and this document, but the content
referenced by those URIs MUST NOT have any URIs, and therefore MUST
be enforced by the client to not follow those URI references or not
render that content to the user if any URI are present in that
specific URI linked content. The purpose of this is to control the
security and more specifically align with the content integrity
mechanism defined in [I-D.ietf-stir-passport-rcd]. It is the belief
of the authors that there isn't a scenario that deeper URI references
would be required or even supported by the current set of properties
for the typical use of jCard properties, but because jCard is
extensible, this rule is set to restrict further extension without
the proper consideration of security and integrity properties of both
Call-Info usage as well as the Rich Call Data and STIR signing of the
data [I-D.ietf-stir-passport-rcd], [RFC8224].
7.2. Usage of multimedia data in jCard
There are a few cases where jCards incorporate URIs or directly
include via Base64 encoding of digital images and sounds. We specify
a few recommended conventions to facilitate more consistent support
of the successful rendering of these images.
For images, such as for the photo and logo properties, the default
image formats SHOULD be png or jpg. These files are mostly commonly
used to support 24-bit RGB images which should consequently be the
default. There are some older telephone devices that may only
support bmp type of images with lower bit-range (e.g. 16-bit or 8-bit
or 1-bit), also with potentially only grayscale or 1-bit black and
Wendt & Peterson Expires 8 September 2022 [Page 9]
Internet-Draft Call-Info Rich Call Data March 2022
white color displays. These exceptions are should considered
optional to support or even recommended not to support and at least
at the time of writing this document are becoming increasingly rare
(i.e. typically displays on devices are either color or color-aware
graphical displays that support png or jpg formats or exclusively
textual displays).
In addition, vector images are increasingly popular in their use for
icons and the need for scalable images without having to send
multiple resolutions. SVG format and [W3C SVG 1.2 Tiny or higher]
specifically appropriate for this specification has gained wide
support as of the writing of this document, as a common format for
vector images and should be supported as an additional default format
for devices that support this specification.
For the cases where image files are referenced by URIs as file
resources, this document defines a character string that SHOULD be
concatenated on to the end of a file name, before the file extension
that signals the height and width of the image to the end device for
the convenience of determining the appropriate resolution to retrieve
without the need to retrieve all the image files. It is also
recommended that images are square ratio formatted with equal height
and width and with a power of two value for the number of pixels
(e.g. 32x32, 128x128, 512x512). The format of the string should be
"filename-HxW" where filename represents the unique string
representing the file and H represents the height in pixels and W
represents the width in pixels.
Because this is a complex and often debated topic that has evolved
over the many years of advances in image coding and display
technologies, we likely suggest relying on either future
specifications or industry forum specifications that might correspond
to supporting particular classes of devices to further define how
URIs can reference appropriate image formats and files.
For audio files, the recommendation is to provide mp3, m4a, or wav
files, although the usage of sound is not well defined in this
specification as, for example, a special ring tone for a particular
caller, and future documents should consider both usage and potential
security risks of playing sounds that are not specifically authorized
by a device user.
7.3. Cardinality
Property cardinalities are indicated, for convenience, using the
following notation and follow the guidance of jCard [RFC7095] and
vCard [RFC6350], which is based on ABNF (see [RFC5234], Section 3.6):
Wendt & Peterson Expires 8 September 2022 [Page 10]
Internet-Draft Call-Info Rich Call Data March 2022
+-------------+--------------------------------------------------+
| Cardinality | Meaning |
+-------------+--------------------------------------------------+
| 1 | Exactly one instance per jCard MUST be present. |
| *1 | Exactly one instance per jCard MAY be present. |
| 1* | One or more instances per jCard MUST be present. |
| * | One or more instances per jCard MAY be present. |
+-------------+--------------------------------------------------+
7.4. Identification properties
These types are used to capture information associated with the
identification and naming of the entity associated with the jCard.
They are initially defined in [RFC6350], but the following list of
properties included and repeated in this Section is a subset of the
properties defined for jCard with properties selected for this
document that have relevance to telephone and messaging applications.
jCard is an extensible object and therefore, there may also be future
specifications that extend the set of properties that may be relevant
to the set of communications applications that utilize this
specification.
7.4.1. "fn" property
The "fn" property has the intent of providing a formatted text
corresponding to the name of the object the jCard represents.
Reference [RFC6350] Section 6.2.1.
Value type: A single text value.
Cardinality: 1*
Example:
["fn", {}, "text", "Mr. John Q. Public\, Esq."]
7.4.2. "n" property
The "n" property has the intent of providing the components of the
name of the object the jCard represents. Reference [RFC6350]
Section 6.2.2.
Value type: A single structured text value. Each component can have
multiple values.
Cardinality: *1
Wendt & Peterson Expires 8 September 2022 [Page 11]
Internet-Draft Call-Info Rich Call Data March 2022
Example:
["n", {}, "text", "Public;John;Quinlan;Mr.;Esq."]
["n", {}, "text", "Stevenson;John;Philip,Paul;Dr.;Jr.,M.D.,A.C.P."]
7.4.3. "nickname" property
The "nickname" property has the intent of providing the text
corresponding to the nickname of the object the jCard represents.
Reference [RFC6350] Section 6.2.3.
Value type: One or more text values separated by a COMMA character
(U+002C).
Cardinality: *
Example:
["nickname", {}, "text", "Robbie"]
["nickname", {}, "text", "Jim,Jimmie"]
["nickname", {}, "text", "TYPE=work:Boss"]
7.4.4. "photo" property
The "photo" property has the intent of supplying an image or
photograph information that annotates some aspect of the object the
jCard represents. Reference [RFC6350] Section 6.2.4.
In addition to the definition of jCard, and to promote
interoperability and proper formatting and rendering of images, the
photo SHOULD correspond to a square image size of the sizes 128x128,
256x256, 512x512, or 1024x1024 pixels.
Value type: A single URI.
Cardinality: *
Example:
["photo", {}, "uri", "http://www.example.com/jqpublic-256x256.png"]
7.5. Delivery Addressing Properties
These properties are concerned with information related to the
delivery addressing or label for the jCard object.
7.5.1. "adr" property
The "adr" property has the intent of providing the delivery address
of the object the jCard represents. Reference [RFC6350]
Section 6.3.1.
Wendt & Peterson Expires 8 September 2022 [Page 12]
Internet-Draft Call-Info Rich Call Data March 2022
Value type: A single structured text value, separated by the
SEMICOLON character (U+003B).
Cardinality: *
Example:
["adr", {"type":"work"}, "text",
["", "", "3100 Massachusetts Avenue NW", "Washington", "DC",
"20008", "USA"]
7.6. Communications Properties
These properties describe information about how to communicate with
the object the jCard represents.
7.6.1. "tel" property
The "tel" property has the intent of providing the telephone number
for telephony communication of the object the jCard represents.
Reference [RFC6350] Section 6.4.1.
Relative to the SIP From header field value this information may
provide alternate telephone number or other related telephone numbers
for other uses.
It is important to note that any of the potential instances of the
"tel" property should not be considered part of the authentication or
verification part of STIR [RFC8224] or required to match the "orig"
claim in the PASSporT [RFC8225]. These telephone numbers should be
considered for contact, fax, or other purposes aligned with the
general usage of jCard and vCard, although consideration of confusing
the caller with different contact telephone number information versus
the actual verified telephone number should be made from a general
policy point of view.
Value type: By default, it is a single free-form text value (for
backward compatibility with vCard 3), but it SHOULD be reset to a URI
value. It is expected that the URI scheme will be "tel", as
specified in [RFC3966], but other schemes MAY be used.
Cardinality: *
Example:
["tel", { "type": ["voice", "text", "cell"], "pref": "1" }, "uri",
"tel:+1-202-555-1000"]
["tel", { "type": ["fax"] }, "uri", "tel:+1-202-555-1001"]
Wendt & Peterson Expires 8 September 2022 [Page 13]
Internet-Draft Call-Info Rich Call Data March 2022
7.6.2. "email" property
The "email" property has the intent of providing the electronic mail
address for communication of the object the jCard represents.
Reference [RFC6350] Section 6.4.2.
Value type: A single text value.
Cardinality: *
Example:
["email", {"type":"work"}, "text", "jqpublic@xyz.example.com"]
["email", {"pref":"1"}, "text", "jane_doe@example.com"]
7.6.3. "lang" property
The "lang" property has the intent of providing the language(s) that
may be used for contacting of the object the jCard represents.
Reference [RFC6350] Section 6.4.4.
Value type: A single language-tag value.
Cardinality: *
Example:
["lang", {"type":"work", "pref":"1"}, "language-tag", "en"]
["lang", {"type":"work", "pref":"2"}, "language-tag", "fr"]
["lang", {"type":"home"}, "language-tag", "fr"]
7.7. Geographical Properties
These properties are concerned with information associated with
geographical positions or regions associated with the object the
jCard represents.
7.7.1. "tz" property
The "tz" property has the intent of providing the time zone of the
object the jCard represents. Reference [RFC6350] Section 6.5.1.
Note: the up-to-date reference for where time-zone names are
maintained is, at the authoring of this document, at this web
address, https://www.iana.org/time-zones.
Value type: The default is a single text value. It can also be reset
to a single URI or utc-offset value.
Cardinality: *
Wendt & Peterson Expires 8 September 2022 [Page 14]
Internet-Draft Call-Info Rich Call Data March 2022
Example:
["tz", {}, "text", "Raleigh/North America"]
7.7.2. "geo" property
The "geo" property has the intent of providing the global positioning
of the object the jCard represents. Reference [RFC6350]
Section 6.5.2.
Value type: A single URI.
Cardinality: *
Example:
["geo", {}, "uri", "geo:37.386013,-122.082932"]
7.8. Organizational Properties
These properties are concerned with information associated with
characteristics of the organization or organizational units of the
object that the jCard represents.
7.8.1. "title" property
The "title" property has the intent of providing the position or job
of the object the jCard represents. Reference [RFC6350]
Section 6.6.1.
Value type: A single text value.
Cardinality: *
Example:
["title", {}, "text", "Research Scientist"]
7.8.2. "role" property
The "role" property has the intent of providing the position or job
of the object the jCard represents. Reference [RFC6350]
Section 6.6.2.
Value type: A single text value.
Cardinality: *
Example:
["role", {}, "text", "Project Leader"]
Wendt & Peterson Expires 8 September 2022 [Page 15]
Internet-Draft Call-Info Rich Call Data March 2022
7.8.3. "logo" property
The "logo" property has the intent of specifying a graphic image of a
logo associated with the object the jCard represents. Reference
[RFC6350] Section 6.6.3.
Value type: A single URI.
Cardinality: *
Example:
["logo", {}, "uri", "http://www.example.com/abccorp-512x512.jpg"]
["logo", {}, "uri", "data:image/jpeg;base64,MIICajCCAdOgAwIBAgIC
AQEEBQAwdzELMAkGA1UEBhMCVVMxLDAqBgNVBAoTI05ldHNjYXBlIENvbW11bm
ljYXRpb25zIENvcnBvcmF0aW9uMRwwGgYDVQQLExNJbmZvcm1hdGlvbiBTeXN0
<...the remainder of base64-encoded data...>"]
7.8.4. "org" property
The "org" property has the intent of specifying the organizational
name and units of the object the jCard represents. Reference
[RFC6350] Section 6.6.2.
Value type: A single structured text value consisting of components
separated by the SEMICOLON character (U+003B).
Cardinality: *
Example:
["org", {}, "text", "ABC\, Inc.;North American Division;Marketing"]
7.9. Explanatory Properties
These properties are concerned with additional explanations, such as
that related to informational notes or revisions specific to the
jCard.
7.9.1. "categories" property
The "categories" property has the intent of specifying application
category information about the object the jCard represents.
Reference [RFC6350] Section 6.7.1.
Value type: One or more text values separated by a COMMA character
(U+002C).
Cardinality: *
Wendt & Peterson Expires 8 September 2022 [Page 16]
Internet-Draft Call-Info Rich Call Data March 2022
Example:
["categories", {}, "text", "TRAVEL AGENT"]
["categories", {}, "text", "INTERNET,IETF,INDUSTRY"]
7.9.2. "note" property
The "note" property has the intent of specifying supplemental
information or a comment about the object the jCard represents.
Reference [RFC6350] Section 6.7.2.
Value type: A single text value.
Cardinality: *
Example:
["note", {}, "text", "This fax number is operational 0800 to 1715
EST\, Mon-Fri."]
7.9.3. "sound" property
The "sound" property has the intent of specifying a digital sound
content information that annotates some aspect of the object the
jCard represents. This property is often used to specify the proper
pronunciation of the name property value of the jCard. Reference
[RFC6350] Section 6.7.5.
Value type: A single URI.
Cardinality: *
Example:
["sound", {}, "uri", "http://www.example.com/pub/logos/abccorp.mp3"]
["sound", {}, "uri", "data:audio/basic;base64,MIICajCCAdOgAwIBAgICBE
AQEEBQAwdzELMAkGA1UEBhMCVVMxLDAqBgNVBAoTI05ldHNjYXBlIENvbW11bm
ljYXRpb25zIENvcnBvcmF0aW9uMRwwGgYDVQQLExNJbmZvcm1hdGlvbiBTeXN0
<...the remainder of base64-encoded data...>"]
7.9.4. "uid" property
The "uid" property has the intent of specifying a globally unique
identifier corresponding to the object the jCard represents.
Reference [RFC6350] Section 6.7.6.
Value type: A single URI value. It MAY also be reset to free-form
text.
Wendt & Peterson Expires 8 September 2022 [Page 17]
Internet-Draft Call-Info Rich Call Data March 2022
Cardinality: *1
Example:
["uid", {}, "uri", "urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6"]
7.9.5. "url" property
The "url" property has the intent of specifying a uniform resource
locator associated with the object the jCard represents. Reference
[RFC6350] Section 6.7.8.
There is potential security and privacy implications of providing
URLs with telephone calls. The end client receiving a jCard with a
URL property MUST only display the URL and not automatically follow
the URL or provide automatic preview of the URL, and generally
provide good practices in making it clear to the user it is their
choice to follow the URL in a browser context consistent with all of
the common browser security and privacy practices available on most
consumer OS environments.
Value type: A single uri value.
Cardinality: *
Example:
["url", {}, "uri", "https://example.org/french-rest/chezchic.html"]
7.9.6. "version" property
The "version" property MUST be included and is intended to specify
the version of the vCard specification used to format this vCard.
Reference [RFC6350] Section 6.7.9.
Value type: A single text value.
Cardinality: 1
Example:
["version", {}, "text", "4.0"]
8. Extension of jCard
Part of the intent of the usage of jCard is that it has its own
extensibility properties where new properties can be defined to relay
newly defined information related to a caller. This capability is
inherently supported as part of standard extensibility. However,
usage of those new properties should be published and registered
following [RFC7095] Section 3.6 or new specifications.
Wendt & Peterson Expires 8 September 2022 [Page 18]
Internet-Draft Call-Info Rich Call Data March 2022
9. Acknowledgements
We would like to thank David Hancock, Alec Fenichel and other members
of the SIPCORE and STIR working group for helpful suggestions and
comments for the creation of this draft.
10. IANA Considerations
10.1. SIP Call-Info Header Field Purpose Token Request
[this RFC] defines the "jcard" token for use as a new token in the
Call-Info header in the "Header Field Parameters and Parameter
Values" registry defined by [RFC3968].
+--------------+----------------+-------------------+------------+
| Header Field | Parameter Name | Predefined Values | Reference |
+--------------+----------------+-------------------+------------+
| Call-Info | jcard | No | [this RFC] |
+--------------+----------------+-------------------+------------+
10.2. SIP Call-Info Header Field Purpose Token Request
[this RFC] defines the "call-reason" generic parameter for use as a
new parameter in the Call-Info header in the "Header Field Parameters
and Parameter Values" registry defined by [RFC3968]. The parameter's
token is "call-reason" and it takes the value of a quoted string.
11. Security Considerations
Revealing information such as the name, location, and affiliation of
a person necessarily entails certain privacy risks. SIP and Call-
Info has no particular confidentiality requirement, as the
information sent in SIP is in the clear anyway. Transport-level
security can be used to hide information from eavesdroppers, and the
same confidentiality mechanisms would protect any Call-Info or jCard
information carried or referred to in SIP.
The security framework of signing and providing integrity to this
data should be followed [I-D.ietf-stir-passport-rcd], with the idea
that the use of constraints and other certificate based associations
should be considered. This includes considerations around
information about the calling party being generally constant vs per
call data being more temporal. This also includes the relationship
that certificates with constraints presents to how they relate to
each other and how that information is managed, protected, and
associated with the correct call corresponding to a calling party.
12. Normative References
Wendt & Peterson Expires 8 September 2022 [Page 19]
Internet-Draft Call-Info Rich Call Data March 2022
[I-D.ietf-stir-passport-rcd]
Wendt, C. and J. Peterson, "PASSporT Extension for Rich
Call Data", Work in Progress, Internet-Draft, draft-ietf-
stir-passport-rcd-14, 25 October 2021,
<https://www.ietf.org/archive/id/draft-ietf-stir-passport-
rcd-14.txt>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC2392] Levinson, E., "Content-ID and Message-ID Uniform Resource
Locators", RFC 2392, DOI 10.17487/RFC2392, August 1998,
<https://www.rfc-editor.org/info/rfc2392>.
[RFC2426] Dawson, F. and T. Howes, "vCard MIME Directory Profile",
RFC 2426, DOI 10.17487/RFC2426, September 1998,
<https://www.rfc-editor.org/info/rfc2426>.
[RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
A., Peterson, J., Sparks, R., Handley, M., and E.
Schooler, "SIP: Session Initiation Protocol", RFC 3261,
DOI 10.17487/RFC3261, June 2002,
<https://www.rfc-editor.org/info/rfc3261>.
[RFC3324] Watson, M., "Short Term Requirements for Network Asserted
Identity", RFC 3324, DOI 10.17487/RFC3324, November 2002,
<https://www.rfc-editor.org/info/rfc3324>.
[RFC3966] Schulzrinne, H., "The tel URI for Telephone Numbers",
RFC 3966, DOI 10.17487/RFC3966, December 2004,
<https://www.rfc-editor.org/info/rfc3966>.
[RFC3968] Camarillo, G., "The Internet Assigned Number Authority
(IANA) Header Field Parameter Registry for the Session
Initiation Protocol (SIP)", BCP 98, RFC 3968,
DOI 10.17487/RFC3968, December 2004,
<https://www.rfc-editor.org/info/rfc3968>.
[RFC4627] Crockford, D., "The application/json Media Type for
JavaScript Object Notation (JSON)", RFC 4627,
DOI 10.17487/RFC4627, July 2006,
<https://www.rfc-editor.org/info/rfc4627>.
Wendt & Peterson Expires 8 September 2022 [Page 20]
Internet-Draft Call-Info Rich Call Data March 2022
[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/info/rfc5234>.
[RFC6350] Perreault, S., "vCard Format Specification", RFC 6350,
DOI 10.17487/RFC6350, August 2011,
<https://www.rfc-editor.org/info/rfc6350>.
[RFC7095] Kewisch, P., "jCard: The JSON Format for vCard", RFC 7095,
DOI 10.17487/RFC7095, January 2014,
<https://www.rfc-editor.org/info/rfc7095>.
[RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
(JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
<https://www.rfc-editor.org/info/rfc7519>.
[RFC7852] Gellens, R., Rosen, B., Tschofenig, H., Marshall, R., and
J. Winterbottom, "Additional Data Related to an Emergency
Call", RFC 7852, DOI 10.17487/RFC7852, July 2016,
<https://www.rfc-editor.org/info/rfc7852>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8224] Peterson, J., Jennings, C., Rescorla, E., and C. Wendt,
"Authenticated Identity Management in the Session
Initiation Protocol (SIP)", RFC 8224,
DOI 10.17487/RFC8224, February 2018,
<https://www.rfc-editor.org/info/rfc8224>.
[RFC8225] Wendt, C. and J. Peterson, "PASSporT: Personal Assertion
Token", RFC 8225, DOI 10.17487/RFC8225, February 2018,
<https://www.rfc-editor.org/info/rfc8225>.
[RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", STD 90, RFC 8259,
DOI 10.17487/RFC8259, December 2017,
<https://www.rfc-editor.org/info/rfc8259>.
Authors' Addresses
Chris Wendt
Somos Inc.
United States of America
Email: chris-ietf@chriswendt.net
Wendt & Peterson Expires 8 September 2022 [Page 21]
Internet-Draft Call-Info Rich Call Data March 2022
Jon Peterson
Neustar Inc.
1800 Sutter St Suite 570
Concord, CA 94520,
United States of America
Email: jon.peterson@neustar.biz
Wendt & Peterson Expires 8 September 2022 [Page 22]