SIPPING                                                     G. Camarillo
Internet-Draft                                                  Ericsson
Intended status: Standards Track                       February 15, 2008
Expires: August 18, 2008


                A Document Format for Requesting Consent
                draft-ietf-sipping-consent-format-06.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on August 18, 2008.

Copyright Notice

   Copyright (C) The IETF Trust (2008).

Abstract

   This document defines an Extensible Markup Language (XML) format for
   a permission document used to request consent.  A permission document
   written in this format is used by a relay to request a specific
   recipient permission to perform a particular routing translation.







Camarillo                Expires August 18, 2008                [Page 1]


Internet-Draft         Permission Document Format          February 2008


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Definitions and Terminology  . . . . . . . . . . . . . . . . .  3
   3.  Permission Document Structure  . . . . . . . . . . . . . . . .  4
     3.1.  Conditions . . . . . . . . . . . . . . . . . . . . . . . .  4
       3.1.1.  Recipient Condition  . . . . . . . . . . . . . . . . .  4
       3.1.2.  Identity Condition . . . . . . . . . . . . . . . . . .  5
       3.1.3.  Target Condition . . . . . . . . . . . . . . . . . . .  7
       3.1.4.  Validity Condition . . . . . . . . . . . . . . . . . .  8
       3.1.5.  Sphere Condition . . . . . . . . . . . . . . . . . . .  8
     3.2.  Actions  . . . . . . . . . . . . . . . . . . . . . . . . .  8
       3.2.1.  Translation Handling . . . . . . . . . . . . . . . . .  8
   4.  Example Document . . . . . . . . . . . . . . . . . . . . . . .  8
   5.  XML Schema . . . . . . . . . . . . . . . . . . . . . . . . . . 10
   6.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 11
     6.1.  XML Namespace Registration . . . . . . . . . . . . . . . . 11
     6.2.  XML Schema Registration  . . . . . . . . . . . . . . . . . 12
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 12
   8.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 12
   9.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 13
     9.1.  Normative References . . . . . . . . . . . . . . . . . . . 13
     9.2.  Informative References . . . . . . . . . . . . . . . . . . 13
   Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 14
   Intellectual Property and Copyright Statements . . . . . . . . . . 15


























Camarillo                Expires August 18, 2008                [Page 2]


Internet-Draft         Permission Document Format          February 2008


1.  Introduction

   The framework for consent-based communications in the Session
   Initiation Protocol (SIP) [I-D.ietf-sip-consent-framework] identifies
   the need for a format to create permission documents.  Such
   permission documents are used by SIP [RFC3261] relays to request
   permission to perform translations.  A relay is defined as any SIP
   server, be it a proxy, B2BUA (Back-to-Back User Agent), or some
   hybrid, which receives a request and translates the request URI into
   one or more next hop URIs to which it then delivers a request.

   The format for permission documents specified in this document is
   based on Common Policy [RFC4745], an XML document format for
   expressing privacy preferences.


2.  Definitions and Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   This document uses the terms defined in
   [I-D.ietf-sip-consent-framework].  For completeness, these terms are
   repeated here.  Figure 1 of [I-D.ietf-sip-consent-framework] shows
   the relationship between target and recipient URIs in a translation
   operation.

   Recipient URI:

      The Request-URI of an outgoing request sent by an entity (e.g., a
      user agent or a proxy).  The sending of such request can have been
      the result of a translation operation.

   Relay:

      Any SIP server, be it a proxy, B2BUA (Back-to-Back User Agent), or
      some hybrid, that receives a request, translates its Request-URI
      into one or more next-hop URIs (i.e., recipient URIs), and
      delivers the request to those URIs.

   Target URI:

      The Request-URI of an incoming request that arrives to a relay
      that will perform a translation operation.






Camarillo                Expires August 18, 2008                [Page 3]


Internet-Draft         Permission Document Format          February 2008


   Translation logic:

      The logic that defines a translation operation at a relay.  This
      logic includes the translation's target and recipient URIs.

   Translation operation:

      Operation by which a relay translates the Request-URI of an
      incoming request (i.e., the target URI) into one or more URIs
      (i.e., recipient URIs) which are used as the Request- URIs of one
      or more outgoing requests.


3.  Permission Document Structure

   A permission document is an XML document, formatted according to the
   schema defined in [RFC4745].  Permission documents inherit the MIME
   type of common policy documents, 'application/auth-policy+xml'.  As
   described in [RFC4745], this type of document is composed of three
   parts: conditions, actions, and transformations.

   This section defines the new conditions and actions defined by this
   specification.  This specification does not define any new
   transformation.

3.1.  Conditions

   Note that, as discussed in [RFC4745], a permission document applies
   to a translation if all the expressions in its conditions part
   evaluate to TRUE.

3.1.1.  Recipient Condition

   The recipient condition is matched against the recipient URI of a
   translation.  Recipient conditions can contain the same elements and
   attributes as identity conditions.

   When performing a translation, a relay matches the recipient
   condition of the permission document that was used to request
   permission for that translation against the destination URI of the
   outgoing request.  When receiving a request granting or denying
   permissions (e.g., a SIP PUBLISH request as described in
   [I-D.ietf-sip-consent-framework]), the relay matches the recipient
   condition of the permission document that was used to request
   permission against the identity of the entity granting or denying
   permissions (i.e., the sender of the PUBLISH request).

   This section defines acceptable means of authentication, which are in



Camarillo                Expires August 18, 2008                [Page 4]


Internet-Draft         Permission Document Format          February 2008


   line with those described in Section 5.6.1 of
   [I-D.ietf-sip-consent-framework].

   The 'id' attribute in the elements <one> and <except> MUST contain a
   scheme when these elements appear in a permission document.

   When used with SIP, a recipient granting or denying a relay
   permissions is considered authenticated if one of the following
   techniques is used:

   SIP Identity  [RFC4474], as described in Section 5.6.1.1 of
      [I-D.ietf-sip-consent-framework].  For PUBLISH requests that are
      authenticated using the SIP Identity mechanism, the identity of
      the sender of the PUBLISH request is equal to the SIP URI in the
      From header field of the request, assuming that the signature in
      the Identity header field has been validated.

   P-Asserted-Identity  [RFC3325] (which can only be used in closed
      network environments) as described in Section 5.6.1.2 of
      [I-D.ietf-sip-consent-framework].  For PUBLISH requests that are
      authenticated using the P-Asserted-Identity mechanism, the
      identity of the sender of the PUBLISH request is equal to the
      P-Asserted-Identity header field of the request.

   Return Routability Test,  as described in Section 5.6.1.3 of
      [I-D.ietf-sip-consent-framework].  It can be used for SIP PUBLISH
      and HTTP GET requests.  No authentication is expected to be used
      with return routability tests and, therefore, no identity matching
      procedures are defined.

   SIP digest,  as described in Section 5.6.1.4 of
      [I-D.ietf-sip-consent-framework].  The identity of the sender is
      set equal to the SIP Address of Record (AOR) for the user that has
      authenticated themselves.

3.1.2.  Identity Condition

   The identity condition, which is defined in [RFC4745], is matched
   against the URI of the sender of the request that is used as input
   for a translation.

   When performing a translation, a relay matches the identity condition
   against the identity of the sender of the incoming request.

   The following subsections define acceptable means of authentication,
   the procedure for representing the identity of the sender as a URI,
   and the procedure for converting an identifier of the form
   user@domain, present in the 'id' attribute of the <one> and <except>



Camarillo                Expires August 18, 2008                [Page 5]


Internet-Draft         Permission Document Format          February 2008


   elements, into a URI.

3.1.2.1.  Acceptable Means of Authentication

   When used with SIP, a request sent by a sender is considered
   authenticated if one of the following techniques is used:

   SIP Digest:  the relay authenticates the sender using SIP digest
      authentication [RFC2617].  However, if the anonymous
      authentication described on page 194 of [RFC3261] is used, the
      sender is not considered authenticated.

   Asserted Identity:  if a request contains a P-Asserted-ID header
      field [RFC3325] and the request is coming from a trusted element,
      the sender is considered authenticated.

   Cryptographically Verified Identity:  if a request contains an
      Identity header field as defined in [RFC4474], and it validates
      the From header field of the request, the request is considered to
      be authenticated.  Note that this is true even if the request
      contained a From header field of the form
      sip:anonymous@example.com.  As long as the signature verifies that
      the request legitimately came from this identity, it is considered
      authenticated.

3.1.2.2.  Computing a URI for the Sender

   For requests that are authenticated using SIP Digest, the identity of
   the sender is set equal to the SIP Address of Record (AOR) for the
   user that has authenticated themselves.  For example, consider the
   following "user record" in a database:

      SIP AOR: sip:alice@example.com
      digest username: ali
      digest password: f779ajvvh8a6s6
      digest realm: example.com

   If the relay receives a request, challenges it with the realm set to
   "example.com", and the subsequent request contains an Authorization
   header field with a username of "ali" and a digest response generated
   with the password "f779ajvvh8a6s6", the identity used in matching
   operations is "sip:alice@example.com".

   For requests that are authenticated using [RFC3325], the identity of
   the sender is equal to the SIP URI in the P-Asserted-ID header field.
   If there are multiple values for the P-Asserted-ID header field
   (there can be one sip URI and one tel URI [RFC3966]), then each of
   them is used for the comparisons outlined in [RFC4745], and if either



Camarillo                Expires August 18, 2008                [Page 6]


Internet-Draft         Permission Document Format          February 2008


   of them match a <one> or <except> element, it is considered a match.

   For requests that are authenticated using the SIP Identity mechanism
   [RFC4474], identity of the sender is equal to the SIP URI in the From
   header field of the request, assuming that the signature in the
   Identity header field has been validated.

   SIP also allows for anonymous requests.  If a request is anonymous
   because the digest challenge/response used the "anonymous" username,
   the request is considered unauthenticated and will not match the
   <identity> condition.  If a request is anonymous because it contains
   a Privacy header field [RFC3323], but still contains a P-Asserted-ID
   header field, the identity in the P-Asserted-ID header field is still
   used in the authorization computations; the fact that the request was
   anonymous has no impact on the identity processing.  However, if the
   request had traversed a trust boundary and the P-Asserted-ID header
   field and the Privacy header field had been removed, the request will
   be considered unauthenticated when it arrives at the relay, and thus
   not match the <sender> condition.  Finally, if a request contained an
   Identity header field that was validated, and the From header field
   contained a URI of the form sip:anonymous@example.com, then the
   watcher is considered authenticated, and it will have an identity
   equal to sip:anonymous@example.com.  Had such an identity been placed
   into a <one> or <except> element, there will be a match.

3.1.2.3.  Computing a SIP URI from the id Attribute

   If the <one> or <except> condition does not contain a scheme,
   conversion of the value in the 'id' attribute to a SIP URI is done
   trivially.  If the characters in the 'id' attribute are valid
   characters for the user and hostpart components of the SIP URI, a
   'sip:' is appended to the contents of the 'id' attribute, and the
   result is the SIP URI.  If the characters in the 'id' attribute are
   not valid for the user and hostpart components of the SIP URI,
   conversion is not possible.  This happens, for example, when the user
   portion of the 'id' attribute contain UTF-8 characters.

3.1.3.  Target Condition

   The target condition is matched against the target URI of a
   translation.  The target condition can contain the same elements and
   attributes as identity conditions.

   When performing a translation, a relay matches the target condition
   against the destination of the incoming request, which is typically
   contained in the Request-URI.





Camarillo                Expires August 18, 2008                [Page 7]


Internet-Draft         Permission Document Format          February 2008


3.1.4.  Validity Condition

   The <validity> element is not applicable to this document.  Each
   permission element has an infinite lifetime and can be revoked using
   an independent mechanism, as described in Section 5.8 of
   [I-D.ietf-sip-consent-framework].  In any case, as discussed in
   Section 4.1 of [I-D.ietf-sip-consent-framework], permissions are only
   valid as long as the context where they were granted is valid.

3.1.5.  Sphere Condition

   The <sphere> element is not applicable to this document and therefore
   is not used.

3.2.  Actions

   The actions in a permission document provide URIs to grant or deny
   permission to perform the translation described in the document.

      Note that the <trans-handling> element is not an action, as
      defined in Common Policy [RFC4745], but rather an informational
      element.  Therefore, the conflict resolution mechanism does not
      apply to it.

   Each policy rule contains at least two <trans-handling> elements; one
   element with a URI to grant and another with a URI to deny
   permission.

3.2.1.  Translation Handling

   The <trans-handling> provides URIs for a recipient to grant or deny
   the relay permission to perform a translation.  The defined values
   are:

   deny:  this action tells the relay not to perform the translation.

   grant:  this action tells the server to perform the translation.

   The 'perm-uri' attribute in the <trans-handling> element provides a
   URI to grant or deny permission to perform a translation.


4.  Example Document

   In the following example, a client adds 'sip:bob@example.org' to the
   translation whose Target URI is 'sip:alices-friends@example.com'.
   The relay handling the translation generates the following permission
   document in order to ask for permission to relay requests sent to



Camarillo                Expires August 18, 2008                [Page 8]


Internet-Draft         Permission Document Format          February 2008


   'sip:alices-friends@example.com' to 'sip:bob@example.org'.  The
   Target URI is 'sip:alices-friends@example.com', and the Recipient URI
   is 'sip:bob@example.org'.  The sender's identity does not play a role
   in this example.  Therefore, the permission document does not put any
   restriction on potential senders.



  +--------+        +--------------------------------+  Permission
  |        |        |                                |   Request
  | Client |        |             Relay              |    with
  |        |        | sip:alices-friends@example.com |  Permission
  +--------+        |                                |   Document
      |             |+-------+                       |-------------+
      |             ||Transl.|                       |             |
      |Manipulation ||Logic  |                       |             |
      +------------>|+-------+                       |             |
           Add      +--------------------------------+             |
     sip:bob@example.org                                           V
                                                 +---------------------+
                                                 |                     |
                                                 |      Recipient      |
                                                 | sip:bob@example.org |
                                                 |                     |
                                                 +---------------------+


























Camarillo                Expires August 18, 2008                [Page 9]


Internet-Draft         Permission Document Format          February 2008


 <?xml version="1.0" encoding="UTF-8"?>
        <cp:ruleset
            xmlns="urn:ietf:params:xml:ns:consent-rules"
            xmlns:cp="urn:ietf:params:xml:ns:common-policy"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <cp:rule id="f1">
         <cp:conditions>
             <cp:identity>
                 <cp:many/>
             </cp:identity>
             <recipient>
                 <cp:one id="sip:bob@example.org"/>
             </recipient>
             <target>
                 <cp:one id="sip:alices-friends@example.com"/>
             </target>
         </cp:conditions>
         <cp:actions>
             <trans-handling
                 perm-uri="sips:grant-1awdch5Fasddfce34@example.com">
                 grant</trans-handling>
             <trans-handling
                 perm-uri="https://example.com/grant-1awdch5Fasddfce34">
                 grant</trans-handling>
             <trans-handling
                 perm-uri="sips:deny-23rCsdfgvdT5sdfgye@example.com">
                 deny</trans-handling>
             <trans-handling
                 perm-uri="https://example.com/deny-23rCsdfgvdT5sdfgye">
                 deny</trans-handling>
         </cp:actions>
         <cp:transformations/>
     </cp:rule>
     </cp:ruleset>


5.  XML Schema














Camarillo                Expires August 18, 2008               [Page 10]


Internet-Draft         Permission Document Format          February 2008


   <?xml version="1.0" encoding="UTF-8"?>
      <xs:schema
        targetNamespace="urn:ietf:params:xml:ns:consent-rules"
        xmlns:cr="urn:ietf:params:xml:ns:consent-rules"
        xmlns:cp="urn:ietf:params:xml:ns:common-policy"
        xmlns:xs="http://www.w3.org/2001/XMLSchema"
        elementFormDefault="qualified"
        attributeFormDefault="unqualified">

        <!-- Conditions -->
        <xs:element name="recipient" type="cp:identityType"/>
        <xs:element name="target" type="cp:identityType"/>

       <!-- Actions -->
       <xs:simpleType name="trans-values">
          <xs:restriction base="xs:string">
            <xs:enumeration value="deny"/>
            <xs:enumeration value="grant"/>
          </xs:restriction>
        </xs:simpleType>

        <xs:element name="trans-handling">
          <xs:complexType>
            <xs:simpleContent>
              <xs:extension base="trans-values">
                <xs:attribute name="perm-uri" type="xs:anyURI"
                              use="required"/>
              </xs:extension>
            </xs:simpleContent>
          </xs:complexType>
        </xs:element>

      </xs:schema>


6.  IANA Considerations

   This section registers a new XML namespace and a new XML schema per
   the procedures in [RFC3688].

6.1.  XML Namespace Registration

      URI: urn:ietf:params:xml:ns:consent-rules

      Registrant Contact: IETF SIPPING working group,
      <sipping@ietf.org>, Gonzalo Camarillo
      <Gonzalo.Camarillo@ericsson.com>




Camarillo                Expires August 18, 2008               [Page 11]


Internet-Draft         Permission Document Format          February 2008


      XML:

      BEGIN
      <?xml version="1.0"?>
      <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN"
        "http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd">
      <html xmlns="http://www.w3.org/1999/xhtml">
      <head>
        <meta http-equiv="content-type"
              content="text/html;charset=iso-8859-1"/>
        <title>Consent Rules Namespace</title>
      </head>
      <body>
        <h1>Namespace for Permission Documents</h1>
        <h2>urn:ietf:params:xml:ns:consent-rules</h2>
      <p>See <a href="[URL of published RFC]">RFCXXXX
          [NOTE TO IANA/RFC-EDITOR:
           Please replace XXXX with the RFC number of this
          specification.]</a>.</p>
      </body>
      </html>
      END

6.2.  XML Schema Registration

      URI: urn:ietf:params:xml:schema:consent-rules

      Registrant Contact: IETF SIPPING working group,
      <sipping@ietf.org>, Gonzalo Camarillo
      <Gonzalo.Camarillo@ericsson.com>

      XML: The XML schema to be registered is contained in Section 5.


7.  Security Considerations

   The framework for consent-based communications in the Session
   Initiation Protocol (SIP) [I-D.ietf-sip-consent-framework] discusses
   security-related issues, such as how to authenticate SIP and HTTP
   requests granting permissions and how to transport permission
   documents between relays and recipients, that are directly related to
   this specification.


8.  Acknowledgements

   Jonathan Rosenberg provided useful ideas on this document.  Hannes
   Tschofenig helped align this document with common policy.  Ben



Camarillo                Expires August 18, 2008               [Page 12]


Internet-Draft         Permission Document Format          February 2008


   Campbell and Mary Barnes performed a thorough review of this
   document.


9.  References

9.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2617]  Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S.,
              Leach, P., Luotonen, A., and L. Stewart, "HTTP
              Authentication: Basic and Digest Access Authentication",
              RFC 2617, June 1999.

   [RFC3261]  Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
              A., Peterson, J., Sparks, R., Handley, M., and E.
              Schooler, "SIP: Session Initiation Protocol", RFC 3261,
              June 2002.

   [RFC3323]  Peterson, J., "A Privacy Mechanism for the Session
              Initiation Protocol (SIP)", RFC 3323, November 2002.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              January 2004.

   [RFC4474]  Peterson, J. and C. Jennings, "Enhancements for
              Authenticated Identity Management in the Session
              Initiation Protocol (SIP)", RFC 4474, August 2006.

   [RFC4745]  Schulzrinne, H., Tschofenig, H., Morris, J., Cuellar, J.,
              Polk, J., and J. Rosenberg, "Common Policy: A Document
              Format for Expressing Privacy Preferences", RFC 4745,
              February 2007.

   [I-D.ietf-sip-consent-framework]
              Rosenberg, J., "A Framework for Consent-Based
              Communications in the Session Initiation  Protocol (SIP)",
              draft-ietf-sip-consent-framework-01 (work in progress),
              November 2006.

9.2.  Informative References

   [RFC3966]  Schulzrinne, H., "The tel URI for Telephone Numbers",
              RFC 3966, December 2004.

   [RFC3325]  Jennings, C., Peterson, J., and M. Watson, "Private



Camarillo                Expires August 18, 2008               [Page 13]


Internet-Draft         Permission Document Format          February 2008


              Extensions to the Session Initiation Protocol (SIP) for
              Asserted Identity within Trusted Networks", RFC 3325,
              November 2002.


Author's Address

   Gonzalo Camarillo
   Ericsson
   Hirsalantie 11
   Jorvas  02420
   Finland

   Email: Gonzalo.Camarillo@ericsson.com





































Camarillo                Expires August 18, 2008               [Page 14]


Internet-Draft         Permission Document Format          February 2008


Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Acknowledgment

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).





Camarillo                Expires August 18, 2008               [Page 15]