Network Working Group                                   Steve Waldbusser
INTERNET-DRAFT                                                Nextbeacon
Category: Standards Track                                    Jon Saperia
                                                    JDS Consulting, Inc.
                                                        Thippanna Hongal
                                               Riverstone Networks, Inc.
                                                           February 2002







                 Policy Based Management MIB
                draft-ietf-snmpconf-pm-10.txt
                      February 28, 2002


                       Steve Waldbusser
                         Jon Saperia
                       Thippanna Hongal





Status of this Memo

This document is an Internet-Draft and is subject to all
provisions of Section 10 of RFC2026.

Internet-Drafts are working documents of the Internet
Engineering Task Force (IETF), its areas, and its working
groups.  Note that other groups may also distribute working
documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other
documents at any time.  It is inappropriate to use Internet-
Drafts as reference material or to cite them other than as
"work in progress."

The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html





Various Authors      Expires Aug 28, 2002             [Page 1]


Internet Draft    Policy-Based Management MIB November 7, 2001


The list of Internet-Draft Shadow Directories can be accessed
at http://www.ietf.org/shadow.html

Copyright Notice

   Copyright (C) The Internet Society (2001).  All Rights Reserved.

1.  Abstract

This memo defines a portion of the Management Information Base
(MIB) for use with network management protocols in TCP/IP-
based internets.  In particular, this MIB defines objects that
enable policy-based configuration management of SNMP
infrastructures.

2.  The SNMP Management Framework

   The SNMP Management Framework presently consists of five
   major components:

    o   An overall architecture, described in RFC 2571 [1].

    o   Mechanisms for describing and naming objects and
        events for the purpose of management. The first
        version of this Structure of Management Information
        (SMI) is called SMIv1 and described in STD 16, RFC
        1155 [2], STD 16, RFC 1212 [3] and RFC 1215 [4]. The
        second version, called SMIv2, is described in STD 58,
        RFC 2578 [5], RFC 2579 [6] and RFC 2580 [7].

    o   Message protocols for transferring management
        information. The first version of the SNMP message
        protocol is called SNMPv1 and described in STD 15, RFC
        1157 [8]. A second version of the SNMP message
        protocol, which is not an Internet standards track
        protocol, is called SNMPv2c and described in RFC 1901
        [9] and RFC 1906 [10]. The third version of the
        message protocol is called SNMPv3 and described in RFC
        1906 [10], RFC 2572 [11] and RFC 2574 [12].

    o   Protocol operations for accessing management
        information. The first set of protocol operations and
        associated PDU formats is described in STD 15, RFC
        1157 [8]. A second set of protocol operations and
        associated PDU formats is described in RFC 1905 [13].





Various Authors      Expires Aug 28, 2002             [Page 2]


Internet Draft    Policy-Based Management MIB November 7, 2001


    o   A set of fundamental applications described in RFC
        2573 [14] and the view-based access control mechanism
        described in RFC 2575 [15].

   A more detailed introduction to the current SNMP Management
   Framework can be found in RFC 2570 [18].

   Managed objects are accessed via a virtual information
   store, termed the Management Information Base or MIB.
   Objects in the MIB are defined using the mechanisms defined
   in the SMI.

   This memo specifies a MIB module that is compliant to the
   SMIv2. A MIB conforming to the SMIv1 can be produced
   through the appropriate translations. The resulting
   translated MIB must be semantically equivalent, except
   where objects or events are omitted because no translation
   is possible (use of Counter64). Some machine readable
   information in SMIv2 will be converted into textual
   descriptions in SMIv1 during the translation process.
   However, this loss of machine readable information is not
   considered to change the semantics of the MIB.




























Various Authors      Expires Aug 28, 2002             [Page 3]


Internet Draft    Policy-Based Management MIB November 7, 2001


3.  Overview

Large IT organizations have developed management strategies to cope
with the extraordinarily large scale and complexity inherent in
today's networks. In particular, they try to configure the network as
a whole by describing and implementing high-level business policies,
rather than managing device by device, where orders of magnitude more
decisions (and mistakes) may be made.

Because this management practice reduces the number of management
decisions necessary, the following benefits are seen:
  - Reduced training needs (fewer details to learn)
  - Reduced documentation costs (fewer details to document)
  - Reduced impact of turnover (less ad-hoc knowledge goes out the door)
  - Greater testability (a greater percentage of fielded
    configurations may be tested in the lab)
  - Higher reliability (combination of factors above)
  - Lower cost of changes (changes can be simpler and operate over a
    wider extent)
  - Lower cost of corporate mergers (less knowledge to transfer; fewer
    policies to integrate)
  - Lower cost of ownership (combination of factors above)

To illustrate the concept of "business policies", some examples are:
  - All routers will run code version 6.2
  - On-site contractors will only be connected to ports that are
    configured with special security restrictions
  - All voice over cable ports in California must provide free local
    calling
  - Apply special forwarding to all ports whose customers have paid
    for premium service.

Each of these policies could represent an action applied to hundreds
of thousands of configuration variables.

In order to automate this practice, customers need software tools that
will implement business policies across their network, as well as
a standard protocol that will ensure that it can be applied to all of
their devices, regardless of the vendor.

This practice is called Policy-Based Management. This document
defines standard managed objects for the Simple Network Management
Protocol that are used to distribute policies in a standard form
throughout the network.






Various Authors      Expires Aug 28, 2002             [Page 4]


Internet Draft    Policy-Based Management MIB November 7, 2001


4.  Policy-Based Management Architecture

Policy-based management is the practice of applying management
operations globally on all managed elements that share certain
attributes.

Policies are intended to express a notion of:
  if (an element has certain characteristics) then (apply operation to
  that element)

Policies take the following normal form:

  if (policyCondition) then (policyAction)

A policyCondition is a script which results in a boolean
to determine whether or not an element is a member of a set of
elements upon which an action is to be performed.

A policyAction is an operation performed on an element or a set of
elements.

These policies are most often executed on or near managed devices,
where the elements live (and thus their characteristics may be easily
inspected), and where operations on those elements will be performed.

A management station is responsible for distributing an organization's
policies to all of the managed devices in the infrastructure. The
pmPolicyTable provides managed objects for representing a policy on a
managed device.

An element is an instance of a physical or logical entity and is
embodied by a group of related MIB variables such as all the variables
for interface #7. This enables policies to be expressed more
efficiently and concisely. Elements can also model circuits, CPUs,
queues, processes, systems, etc.

Conceptually, policies are executed in the following manner:

  foreach element for which policyCondition returns true
      execute policyAction on that element

For example:

  If (interface is fast ethernet)       then (apply full-duplex mode)
  If (interface is access)              then (apply security filters)





Various Authors      Expires Aug 28, 2002             [Page 5]


Internet Draft    Policy-Based Management MIB November 7, 2001


  If (circuit w/gold service paid for)  then (apply special queuing)

Each unique combination of policy and element is called an execution
context. Within a particular execution context, the phrase "this
element" is often used to refer to the associated element, as most
policy operations will be applied to "this element".  The address of
"this element" contains the object identifier of any attribute of the
element, the SNMP context the element was discovered in, and the address of
the system on which the element was discovered.

Policies can manage elements on the same system:

       -----------------------------------------------------
       |                                                   |
       |              Managed System                       |
       |                                                   |
       |                                                   |
       |   ------------------             Managed Elements |
       |   |                |               interfaces     |
       |   | Policy Manager | manages...    circuits       |
       |   |                |               queues         |
       |   ------------------               processes      |
       |                                    ...            |
       |                                                   |
       -----------------------------------------------------

or elements on other systems:

                                         --------------------------
                                         |  Managed System        |
  --------------------------             |    Managed Elements    |
  |                        |             |      interfaces        |
  |  Management Station or |             |      circuits          |
  |    Mid-Level Manager   |             |      ...               |
  |                        |             --------------------------
  |   ------------------   | manages...
  |   | Policy Manager |   |             --------------------------
  |   ------------------   |             |  Managed System        |
  |                        |             |    Managed Elements    |
  --------------------------             |      interfaces        |
                                         |      circuits          |
                                         |      ...               |
                                         --------------------------

                                         ...





Various Authors      Expires Aug 28, 2002             [Page 6]


Internet Draft    Policy-Based Management MIB November 7, 2001


PolicyConditions have the capability of performing comparison operations
on SNMP variables, logical expressions, and other functions. Many
device characteristics are already defined in MIBs and are
easy to include in policyCondition expressions (ifType == ethernet,
frCircuitCommittedBurst < 128K, etc). However, there are
important characteristics that aren't currently in MIB objects, and
worse, it is not current practice to store this information on managed
devices. Therefore, this document defines MIB objects for this
information. To meet today's needs there are three missing areas:
roles, capabilities and time.

Roles

A role is an administratively specified characteristic of a managed
element. It is a selector for policies, to determine the applicability
of the policy to a particular managed element.

Some examples of roles are political, financial, legal,
geographical, or architectural characteristics, typically not directly
derivable from information stored on the managed system. For example,
"paid for premium service" or "is plugged into a UPS" are examples of
roles, whereas the "percent utilization of a link" would not be.

Some types of information one would put into a role include:

  political - describes the role of a person or group of people, or of
              a service that a group of people use. Examples:
              executive, sales, outside-contractor, customer.
        If (attached user is executive) then (apply higher bandwidth)
        If (attached user is outside-contractor) then (restrict access)

  financial/legal - describes what financial consideration was
                    received. Could also include contractual or legal
                    considerations. Examples:
                    paid, gold, free, trial, demo, lifeline
        If (gold service paid for) then (apply special queuing)

  geographical - describes the location of an element. Examples:
                 California, Headquarters, insecure conduit.
        If (interface leaves the building) then (apply special security)

  architectural - describes the network architects "intent" for an
                  element. For example: backup, trunk.
         If (interface is backup) then (set ifAdminStatus = down)






Various Authors      Expires Aug 28, 2002             [Page 7]


Internet Draft    Policy-Based Management MIB November 7, 2001


  Roles in this model are human defined strings that can be referenced
  by policy code. The role table in this MIB may be used to assign
  role strings to elements and to view all role string
  assignments. Implementation-specific mechanisms may also be used to
  assign role strings, however such assignments must be visible in the
  role table. Multiple roles may be assigned to each element. Because
  policy code has access to data in MIB objects that represent the
  current state of the system and (in contrast) role strings are more
  static, it is recommended that role strings not duplicate
  information that is available in MIB objects. Role strings generally
  should be used to describe information not accessible in MIB objects.

  Policy scripts may inspect roles assignments to make decisions based
  on whether or not an element has a particular role assigned to it.

  The pmRoleTable allows a management station to learn what roles
  exist on a managed system. The management station may choose not to
  install policies that depend on a role that does not exist on any
  elements in the system. The management station can then register for
  notifications of new roles. Upon receipt of a pmNewRoleNotification,
  it may choose to install new policies that make use of that new
  role.

Capabilities

  The capabilities table allows a management station to learn what
  capabilities exist on a managed system. The management station may
  choose not to install policies that depend on a capability that
  does not exist on any elements in the system. The management station
  can then register for notifications of new capabilities. Upon
  receipt of a pmNewCapabilityNotification, it may choose to install
  new policies that make use of that new capability.

Time

  Managers may wish to define policies that are intended to apply for
  certain periods of time. This might mean that a policy is installed
  and is dormant for a period of time, becomes ready, and then later
  goes dormant. Sometimes these time periods will be regular
  (Monday-Friday 9-5) and sometimes ad-hoc. This MIB provides a
  schedule table that can schedule when a policy is ready and when it
  is dormant.








Various Authors      Expires Aug 28, 2002             [Page 8]


Internet Draft    Policy-Based Management MIB November 7, 2001


A policy manager contains:

  -------------------------------------------------------
  | Policy Manager                                      |
  |                                                     |
  |   ----------------------------------------          |
  |   | Agent                                |          |
  |   |                                      |          |
  |   |  ---------------------------------   |          |
  |   |  | Policy Download and Control   |   |          |
  |   |  |   pmPolicyTable               |   |          |
  |   |  |   pmElementTypeRegTable       |   |          |
  |   |  |   pmSchedTable                |   |          |
  |   |  ---------------------------------   |          |
  |   |                                      |          |
  |   |  ---------------------------------   |          |
  |   |  | Policy Environment Control    |   |          |
  |   |  |   pmRoleTable                 |   |          |
  |   |  |   pmCapabilitiesTables        |   |          |
  |   |  ---------------------------------   |          |
  |   |                                      |          |
  |   |  ---------------------------------   |          |
  |   |  | Policy Monitoring             |   |          |
  |   |  |   pmTrackingTables            |   |          |
  |   |  |   pmDebuggingTable            |   |          |
  |   |  ---------------------------------   |          |
  |   ----------------------------------------          |
  |                                                     |
  |   --------------------------------                  |
  |   | Execution Environment        |                  |
  |   |                              |                  |
  |   |  -----------------------     |                  |
  |   |  | Policy Scheduler    |     |                  |
  |   |  -----------------------     |                  |
  |   |  -----------------------     |                  |
  |   |  | Language            |     |                  |
  |   |  -----------------------     |                  |
  |   |  -----------------------     |                  |
  |   |  | Function Library    |     |                  |
  |   |  -----------------------     |                  |
  |   --------------------------------                  |
  -------------------------------------------------------








Various Authors      Expires Aug 28, 2002             [Page 9]


Internet Draft    Policy-Based Management MIB November 7, 2001


5.  Policy Based Management Execution Environment


5.1.  Terminology

Active Schedule - A schedule specifies certain times that it will be
    considered active. A schedule is active during those times.

Valid Policy - A valid policy is a policy that is fully configured and
    enabled to run. A valid policy may run unless it is linked to a
    schedule entry that says the policy is not currently active.

Ready Policy - A ready policy is a valid policy that either has no
    schedule or is linked to a schedule that is currently active.

Precedence Group - Multiple policies can be assigned to a precedence
    group with the resulting behavior that for each element, of the
    ready policies that match the condition, only the one with the
    highest precedence value will be active. For example if there is a
    default bronze policy that applies to any interface and a special
    policy for gold interfaces, the higher precedence of the gold
    policy will ensure that it is run on gold ports and the bronze
    policy isn't.

Active Execution Context - An active execution context is a pairing of
    a ready policy with an element that matches the element type
    filter and the policy condition. If there are multiple policies in
    the precedence group, it is also necessary that no higher
    precedence policy in the group match the policy condition.

Run-Time Exception (RTE) - A run-time exception is a fatal error
    caused in language or function processing. If, during the
    invocation of a script, a run-time exception occurs, execution of
    that script is immediately terminated. If a policyCondition
    experiences a run-time exception while processing an element, the
    element is not matched by the condition and the associated action
    will not be run on that element. A run-time exception can cause an
    entry to be added to the pmDebuggingTable and will be reflected in
    the pmTrackingPEInfo object. The phrase run-time exception will be
    commonly abbreviated to RTE.










Various Authors      Expires Aug 28, 2002            [Page 10]


Internet Draft    Policy-Based Management MIB November 7, 2001


5.2.  Execution Environment - Elements of Procedure

There are several steps performed in order to execute policies
in this environment:

    - Element Discovery
    - Element Filtering
    - Policy Enforcement


5.3.  Element Discovery

An element is an instance of a physical or logical entity.
Examples of elements include interfaces, circuits, queues,
CPUs, and processes. Sometimes various attributes of an entity
will be described through tables in several standard and
proprietary MIBs - as long as the indexing is consistent
between these tables, the entity can be modeled as one
element. For example, the ifTable and the dot3Stats table both
contain attributes of interfaces and share the same index
(ifIndex), therefore they can be modeled as one element type.

The Element Type Registration table allows the manager to
learn what element types are being managed by the system and
to register new types if necessary. An element type is
registered by providing the OID of an SNMP object (i.e.,
without the instance). Each SNMP instance that exists under
that object is a distinct element. The index part of the
discovered OID will be supplied to policy conditions and
actions so that this code can inspect and configure the
element. The agent can determine the index portion of
discovered OIDs based on the length of the
pmElementTypeRegOIDPrefix for the portion of the MIB that is
being retrieved. For example, if the OIDPrefix is 'ifEntry'
which has 9 subids, the index starts on the 11th subid
(skipping the subidentifier for the column, e.g.: ifSpeed).

For each element that is discovered, the policy condition is
called with the element's name as an argument to see if the
element is a member of the set that the policy acts upon.

Note that agents may automatically configure entries in this
table for frequently used element types (interfaces, circuits,
etc.). In particular, it may configure elements for whom
discovery is optimized in one or both of the following ways:





Various Authors      Expires Aug 28, 2002            [Page 11]


Internet Draft    Policy-Based Management MIB November 7, 2001


1. The agent may discover elements by scanning internal data
   structures as opposed to issuing local SNMP requests. It is
   possible to recreate the exact semantics described in this
   table even if local SNMP requests are not issued.

2. The agent may receive asynchronous notification of new
   elements (for example, "card inserted") and use that
   information to instantly create elements rather than
   through polling. A similar feature might be available for
   the deletion of elements.

Note that upon restart, the disposition of agent-installed
entries is described by the pmPolicyStorageType object.

A special element type "0.0" exists representing the "system
element". "0.0" represents the single instance of the system
itself and provides an execution context for policies to
operate on "the system" as well as on MIB objects modeled as
scalars. For example, "0.0" gives an execution context for
policy-based selection of the operating system code version
(likely modeled as a scalar MIB object). The element type
"0.0" always exists - as a consequence, no actual discovery
will take place and the pmElementTypeRegMaxLatency object will
have no effect for the "0.0" element type. However, if the
"0.0" element type is not registered in the table, policies
will not be executed on the "0.0" element.

If the agent is discovering elements by polling, it should
check for new elements no less frequently than
pmElementTypeRegMaxLatency would dictate. When an element is
first discovered all policyConditions are run immediately and
policyConditions that match will have the associated
policyAction run immediately. Subsequently, the
policyCondition will be run regularly for the element with no
more than pmPolicyConditionMaxLatency milliseconds elapsing
between each invocation. Note that if an implementation has
the ability to be alerted immediately when a particular type
of element is created, it is urged to discover that type of
element in this fashion rather than through polling, resulting
in immediate configuration of the discovered element.










Various Authors      Expires Aug 28, 2002            [Page 12]


Internet Draft    Policy-Based Management MIB November 7, 2001


5.3.1.  Implementation Notes

Note that while the external behavior of this registration
process is defined in terms of the walking of MIB tables,
implementation strategies may differ. For example, commonly-
used element types (like interface) may have purpose-built
element discovery capability built-in and advertised to
managers through an entry in the pmElementTypeRegTable.

Before registering an element type, it is the responsibility
of a manager to inspect the table and see if it is already
registered (either by the agent or by another manager). Note
that entries that differ only in the last subid (which
specifies which object in an entry) are effectively duplicates
and should be treated as such by the manager.

The system which implements the Policy-Based Management MIB
may not have knowledge of the format of object identifiers in
other MIBs. Therefore it is inappropriate for it to check
these OIDs for errors. It is the responsibility of the
management station to register well-formed object-identifiers.
For example, if an extra sub-identifier is supplied when
registering the ifTable, no elements will be discovered.
Similarly, if a sub-identifier is missing, every element will
be discovered numerous times (once per column) and none of the
element addresses will be well-formed.



5.4.  Element Filtering

The first step in executing a policy is to see if the policy
is ready to run based on its schedule. If the pmPolicySchedule
object is equal to zero, there is no schedule defined and the
policy is always ready. If the pmPolicySchedule object is non-
zero, then the policy is ready only if the referenced schedule
group contains at least one valid schedule entry that is
active at the current time.

If the policy is ready, the next step in executing a policy is
to see which elements match the policy condition. To evaluate
a policy, the policy condition is called once for each element
and runs to completion. The element's name is the only
argument that is passed to the condition code for each
invocation. Except for state accessible through library





Various Authors      Expires Aug 28, 2002            [Page 13]


Internet Draft    Policy-Based Management MIB November 7, 2001


functions, no state is remembered within the policy script
from the previous invocation of this element nor from the
previous invocation of the policy condition. If any run-time
exception occurs, the condition will terminate immediately for
this element. If the condition returns non-zero, the
corresponding policy action will be executed for this element.

If an element matches a condition and it had not matched that
condition the last time it was checked (or it is a newly-
discovered element), the associated policyAction will be
executed immediately. If the element had matched the condition
at the last check, it will remain in the set of elements whose
policyAction will be run within the policyActionMaxLatency.


5.4.1.  Implementation Notes

It is an implementation-dependent matter as to whether policy
conditions are multi-tasked. Each condition/element
combination is conceptually its own process and can be
scheduled sequentially or two or more could be run
simultaneously.


5.5.  Policy Enforcement

For each element that has returned non-zero from the policy
condition, the corresponding policy action is called. The
element's name is the only argument that is passed to the
policy action for each invocation.  Except for state
accessible from library functions, no state is remembered from
the policy condition evaluation, nor from the previous
condition/action invocation of this element nor from the
previous invocation of the policy condition or action on any
other element. If any run-time exception occurs, the action
will terminate immediately for this element.


5.5.1.  Implementation Notes

It is an implementation-dependent matter as to how policy
actions are are multi-tasked. Each condition/element
combination is conceptually its own process and can be
scheduled sequentially or two or more could be run
simultaneously.





Various Authors      Expires Aug 28, 2002            [Page 14]


Internet Draft    Policy-Based Management MIB November 7, 2001


6.  The PolicyScript Language

Policy conditions and policy actions are expressed with the
PolicyScript language. The PolicyScript language is designed
to be a small interpreted language that is simple to
understand and implement; it is designed to be appropriate for
writing small scripts that make up policy conditions and
actions.

PolicyScript is intended to be familiar to programmers that
know one of several common languages, including Perl and C.
PolicyScript is nominally a subset of the C language - however
it was desirable to have access to C++'s operator overloading
(solely to aid in documenting the language - operator
overloading is not a feature of PolicyScript). Therefore,
PolicyScript is defined formally as a subset of the C++
language. A subset was used to provide for easy development of
low-cost interpreters of PolicyScript and to take away
language constructs that are peculiar to the C/C++ languages.
For example, it is expected that both C and Perl programmers
will understand the constructs allowed in PolicyScript.

Some examples of the features that have been removed from the
C/C++ language are: function definitions, pointer variables,
structures, enums, typedefs, floating point and pre-processor
functions (except for comments).

This language is formally defined as a subset of ISO C++ [19],
but only allows those constructs that may be expressed in the
Extended Backus-Naur Form (EBNF) documented here. This is done
because while EBNF doesn't fully specify syntactical rules (it
allows constructs that are invalid) and doesn't specify
semantic rules, it can successfully be used to define the
subset of the language that is required for conformance to
this specification. Unless explicitly described herein, the
meaning of any construct expressed in the EBNF can be found by
reference to the ISO C++ standard.

The use of comments and newlines are allowed and encouraged in
order to promote readability of PolicyScript code. Comments
begin with '/*' and end with '*/' or begin with '//' and go
until the end of the line.

One subset is not expressible in the EBNF syntax: all
variables within an instance of a PolicyScript script are





Various Authors      Expires Aug 28, 2002            [Page 15]


Internet Draft    Policy-Based Management MIB November 7, 2001


within the same scope. In other words, variables defined in a
block delimited with '{' and '}' are not in a separate scope
from variables in the enclosing block.

PolicyScript code must be expressed in the UTF8 character set.

In the EBNF used here, terminals are character set members
(singly or in a sequence) that are enclosed between two
single-quote characters or described as a phrase between '<'
and '>' characters.  Nonterminals are a sequence of letters
and underscore characters.  A colon (:) following a
nonterminal introduces its definition, a production.  In a
production, a '|' character separates alternatives. The '('
and ')' symbols group the enclosed items. The '[' and ']'
symbols indicate that the enclosed items are optional. The '?'
symbol following an item indicates that the item is optional.
The '*' symbol following an item indicates that the item is
repeated zero, one, or more times. The '+' symbol following an
item indicates that the item is repeated one or more times.
The symbol '--' begins a comment that ends at the end of the
line.


6.1.  Formal Definition

The PolicyScript language follows the syntax and semantics of
ISO C++ [19], but is limited to that which can be expressed in
the EBNF below.

The following keywords are reserved words and cannot be used
in any policy script. This prevents someone from using a word
that is a common keyword in another language as an identifier
in a script and thereby confusing the meaning of the script.
The reserved words are:
    auto, case, char, const, default, do, double, enum,
    extern, float, goto, inline, int, long, register, short,
    signed, sizeof, static, struct, switch, typedef, union,
    unsigned, void, and volatile.

Any syntax error, use of a reserved keyword, reference of an
unknown identifier, improper number of function arguments,
error in coercing an argument to the proper type, exceeding
local limitations on string length or exceeding local
limitations on the total amount of storage used by local
variables will cause a RTE.





Various Authors      Expires Aug 28, 2002            [Page 16]


Internet Draft    Policy-Based Management MIB November 7, 2001


PolicyScript permits comments using the comment delimiters,
'/*' to '*/' or the start of comment symbol '//'.

-- Lexical Grammar

    letter:       '_' | 'a' | 'b' | 'c' | 'd' | 'e' | 'f'
                | 'g' | 'h' | 'i' | 'j' | 'k' | 'l' | 'm'
                | 'n' | 'o' | 'p' | 'q' | 'r' | 's' | 't'
                | 'u' | 'v' | 'w' | 'x' | 'y' | 'z'
                | 'A' | 'B' | 'C' | 'D' | 'E' | 'F'
                | 'G' | 'H' | 'I' | 'J' | 'K' | 'L' | 'M'
                | 'N' | 'O' | 'P' | 'Q' | 'R' | 'S' | 'T'
                | 'U' | 'V' | 'W' | 'X' | 'Y' | 'Z'

    digit:        '0' | '1' | '2' | '3' | '4'
                | '5' | '6' | '7' | '8' | '9'

    non_zero:   '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9'

    oct_digit:  '0' | '1' | '2' | '3' | '4' | '5' | '6' | '7'

    hex_digit:    digit | 'a' | 'b' | 'c' | 'd' | 'e' | 'f'
                        | 'A' | 'B' | 'C' | 'D' | 'E' | 'F'

    escape_seq:    '\''   |   '\"'   |   '\?'   |   '\\'
                 | '\a'   |   '\b'   |   '\f'   |   '\n'
                 | '\r'   |  '\t'    |   '\v'
                 | '\' oct_digit+    | '\x' hex_digit+

    non_quote:  Any character in the UTF-8 character set
                except single quote ('), double quote ("),
                backslash ('\') or newline.

    c_char:            non_quote | '"' | escape_seq

    string_literal:    '"' s_char* '"'

    s_char:            non_quote | ''' | escape_seq

    char_constant:     ''' c_char '''

    decimal_constant:  non_zero digit*

    octal_constant:    '0' oct_digit*






Various Authors      Expires Aug 28, 2002            [Page 17]


Internet Draft    Policy-Based Management MIB November 7, 2001


    hex_constant:      ( '0x' | '0X' ) hex_digit+

    integer_constant:  decimal_constant | octal_constant | hex_constant

    identifier:        letter ( letter | digit )*

-- Phrase Structure Grammar

    -- Expressions

    primary_expr:      identifier | integer_constant | char_constant
                     | string_literal  |  '(' expression ')'

    postfix_expr:      primary_expr
                     | identifier '(' argument_expression_list? ')'
                     | postfix_expr '++'
                     | postfix_expr '--'
                     | postfix_expr '[' expression ']'

    argument_expression_list:
                       assignment_expr
                     | argument_expression_list ',' assignment_expr

    unary_expr:        postfix_expr  |  unary_op unary_expr

    unary_op:          '+' | '-' | ' | '!' | '++' | '--'

    binary_expr:  unary_expr | binary_expr binary_op unary_expr

    binary_op:       '||' | '&&' | '|'  | '^'  | '&'  | '!='
                   | '==' | '>=' | '<=' | '>'  | '<'  | '>>'
                   | '<<' |  '-' | '+'  | '%'  | '/'  |  '*'

    assignment_expr:      binary_expr
                        | unary_expr assignment_op assignment_expr

    assignment_op:     '=' | '*='  | '/=' | '%=' | '+=' | '-='
                   | '<<=' | '>>=' | '&=' | '^=' | '|='

    expression:    assignment_expr | expression ',' assignment_expr

    -- Declarations

    declaration:       'var' declarator_list ';'






Various Authors      Expires Aug 28, 2002            [Page 18]


Internet Draft    Policy-Based Management MIB November 7, 2001


    declarator_list:   init_declarator
                     | declarator_list ',' init_declarator

    init_declarator:   identifier [ '=' assignment_expr ]

    -- Statements

    statement:   declaration
               | compound_statement
               | expression_statement
               | selection_statement
               | iteration_statement
               | jump_statement

    compound_statement:    '{' statement* '}'

    expression_statement:  expression? ';'

    selection_statement:
            'if' '(' expression ')' statement
          | 'if' '(' expression ')' statement 'else' statement

    iteration_statement:
            'while' '(' expression ')' statement
          | 'for' '(' expression? ';' expression? ';' expression? ')'
                statement

    jump_statement:    'continue' ';'
                     | 'break' ';'
                     | 'return' expression? ';'

    -- Root production

    PolicyScript:     statement*


6.2.  Variables

To promote shorter scripts and ease in writing scripts,
PolicyScript provides a loosely-typed data class, "var", that
can store both integer and string values.  The native C++
types (char, int, etc.) are thus unnecessary and have not been
carried into the subset that comprises this language. The
semantics of the "var" type are modeled after those of
ECMAScript[20].





Various Authors      Expires Aug 28, 2002            [Page 19]


Internet Draft    Policy-Based Management MIB November 7, 2001


  For example:

    var number = 0, name = "IETF";

This language will be executed in an environment where the
following typedef is declared. (Note that this typedef will
not be visible in the policyCondition or policyAction code.)

  typedef ... var;

While this declaration is expressed here as a typedef, the
'typedef' keyword itself is not available to be used in
PolicyScript code.


6.2.1.  The var class

A value is an entity that takes on one of two types: string or
integer.

The String type is the set of all finite ordered sequences of
zero or more 8-bit unsigned integer values ("elements"). The
string type can store textual data as well as binary data
sequences. Each element is regarded as occupying a position
within the sequence. These positions are indexed with
nonnegative integers. The first element (if any) is at
position 0, the next element (if any) at position 1, and so
on. The length of a string is the number of elements (i.e.,
8-bit values) within it. The empty string has length zero and
therefore contains no elements.

The integer type is the set of all integer values in the range
-9223372036854775808 (-2^63) to 18446744073709551615 (2^64-1).
If an integer operation would cause a (positive) overflow,
then the result is returned modulo 2^64. If an integer
operation would cause a (negative) underflow, then the result
is undefined. Integer division rounds towards zero.

Prior to initialization, a var object has type String and a
length of zero.

The policy script runtime system performs automatic type
conversion as needed. To clarify the semantics of certain
constructs it is useful to define a set of conversion
operators: ToInteger(), ToString(), ToBoolean() and Type().





Various Authors      Expires Aug 28, 2002            [Page 20]


Internet Draft    Policy-Based Management MIB November 7, 2001


These operators are not a part of the language; they are
defined here to aid the specification of the semantics of the
language. The conversion operators are polymorphic; that is,
they can accept a value of any standard type.

ToInteger

The operator ToInteger converts its argument to a value of
type Integer according to the following table:

    Integer            The result equals the input argument
                       (no conversion).
    String             See grammar and note below
    integer_constant   The result equals the input argument
                       (no conversion).
    string_literal     See grammar and note below
    char_constant      See grammar and note below

ToInteger Applied to strings

ToInteger applied to the String Type, string_literal and
char_constants applies the following grammar to the input. If
the grammar cannot interpret the string as an expansion of
numeric_string, then an RTE is generated. Note that a
numeric_string that is empty or contains only white space is
converted to 0.

-- EBNF for numeric_string

  numeric_string : white_space* numeric? white_space*

  white_space :      <TAB> |  <SP> |  <NBSP> |  <FF> |  <VT>
                   | <CR>  |  <LF> |  <LS>   |  <PS> |  <USP>

  numeric :        signed_decimal |  hex_constant | octal_constant |
                   enum_decimal

  signed_decimal:  [ '-' | '+' ] decimal_constant

  enum_decimal:    [ letter | digit | '-' ]* '(' decimal_constant ')'

  -- decimal_constant, hex_constant, octal_constant are defined in the
  -- PolicyScript EBNF described earlier

  Note that when converting the enum_decimal form, the sequence of





Various Authors      Expires Aug 28, 2002            [Page 21]


Internet Draft    Policy-Based Management MIB November 7, 2001


  characters before the parenthesis and the pair of parenthesis
  themselves are completely ignored and the decimal_constant inside
  the parenthesis is converted. Thus, "frame-relay(32)" translates to
  the integer 32.

  While this will make the script more readable than
  using the constant "32", the burden is on the code writer to be
  accurate because "ethernet-csmacd(32)" and "frame-relay(999)" will
  also be accepted.

ToString

The operator ToString converts its argument to a value of type String
according to the following table:

    Integer           Return the string containing the decimal
                      representation of the input argument in
                      the form of signed_decimal except that
                      no leading '+' will be used.
    String            Return the input argument (no conversion)
    integer_constant  Return the string containing the decimal
                      representation of the input argument in the
                      form of signed_decimal except that no
                      leading '+' will be used.
    string_literal    Return the input argument (no conversion)
    char_constant     Return the string of length one containing
                      the value of the input argument.

ToBoolean

The operator ToBoolean converts its argument to a value of type
Integer according to the following table:

    Integer            The result is 0 if the argument is 0.
                       Otherwise the result is 1.
    String             The results is 0 if the argument is the
                       empty string. Otherwise the result is 1.
    integer_constant   The result is 0 if the argument is 0.
                       Otherwise the result is 1.
    string_literal     The result is 0 if the argument is the
                       empty string. Otherwise the result is 1.
    char_constant      The result is 1.

Operators






Various Authors      Expires Aug 28, 2002            [Page 22]


Internet Draft    Policy-Based Management MIB November 7, 2001


The rules below specify the type conversion rules for the
various operators.

    A++:   A = ToInteger(A); A++;
    A--:   A = ToInteger(A); A--;
    ++A:   A = ToInteger(A); ++A;
    --A:   A = ToInteger(A); --A;
    +A:    ToInteger(A);
    -A:     -1 * ToInteger(A);
   A:   ToInteger(A);
    !A:    !ToBoolean(A);
    A * B, A - B, A & B, A ^ B , A | B, A << B, A >> B:
           ToInteger(A) <operator> ToInteger(B)
    A / B, A % B:
           if (ToInteger(B) == 0)
             RTE, terminate;
           else
             ToInteger(A) <operator> ToInteger(B)
    A + B:
           if (Type(A) == String || Type(B) == String)
             ToString(A) concatenated with ToString(B)
           else
             A + B
    Compound Assignment (<operator>=):
            Simply follow rules above. Note that type of LHS (Left
            Hand Side) may be changed as a result.

    A < B, A > B, A <= B, A >= B, A == B, A != B:
           if (Type(A) == String && Type(B) == String)
               lexically compare strings with strcmp() logic
           else
               ToInteger(A) <operator> ToInteger(B)
     A && B:
            if (ToBoolean(A))
                ToBoolean(B);
            else
                false;
     A || B:
            if (ToBoolean(A))
                true;
            else
                ToBoolean(B);

     if(A):
            if (ToBoolean(A))





Various Authors      Expires Aug 28, 2002            [Page 23]


Internet Draft    Policy-Based Management MIB November 7, 2001


     while(A):
            while(ToBoolean(A))
     for(...; A; ...):
           for(...; ToBoolean(A); ...)

     A[B] as a RHS value:
           if (Type(A) != String
                || ToInteger(B) >= strlen(A))
              RTE, terminate;
           A[ ToInteger(B) ]
           The contents are returned as a string of length one

      A[B] = C as a LHS value:
           if (Type(A) != String
                || ToInteger(B) >= strlen(A))
              RTE, terminate;
           if (strlen(ToString(C)) == 0)
              RTE, terminate
           A[ ToInteger(B) ] = First octet of ToString(C)

           Note that this is only applicable in a simple assignment.

For example, in the expression

    "getVar("ifSpeed.1") < 128000"

getVar always returns a string and '128000' is implicitly an
integer. The rules for '<' dictate that if either argument is
an integer then a 'numeric less than' is performed on
ToInteger(A) and ToInteger(B).

If "getVar("ifSpeed.1")" returns "64000", the expression can
be translated to:
  ToInteger("64000") < ToInteger(128000); or,
  64000 < 128000; or,
  True


6.3.  PolicyScript QuickStart Guide

PolicyScript is designed so that programmers fluent in other
languages can quickly begin to write scripts.

One way to become familiar with a language is to see it in
action.  The following nonsensical script exercises most of





Various Authors      Expires Aug 28, 2002            [Page 24]


Internet Draft    Policy-Based Management MIB November 7, 2001


the PolicyScript constructs (though it skips some usage
options and many arithmetic operators).

    var x, index = 7, str = "Hello World", oid = "ifSpeed.";

    x = 0;
    while(x < 10){
        if (str < "Goodbye") /* string comparison */
            continue;
        else
            break;
        x++;
    }
    if (oidlen(oid) == 10)
        oid += "." + index; // append index to oid
    for(x = 0; x < 7; x++){
          str += "a";

          var y = 12;
          index = ((x * 7) + y) % 3;
          if (str[6] == 'W')
              return index;
    }
    return;

A few examples that are more practical are:

For a condition:
    // Return 1 if this is an interface and it is tagged
    // with the role "gold"
    return (inSubtree(elementName(), "ifEntry")
        && roleMatch("gold"))

A condition/action pair:
First, register the Host Resources MIB hrSWRunEntry as a new element
in the pmElementTypeRegTable. This will cause the policy to run for
every process on the system. The token '$*' will be replaced by the
script interpreter with a process index (see Section 7 for a
definition of the '$*' token).

The condition:
    // if it's a process and it's an application and it's
    // consumed more than 5 minutes of CPU time
    return (inSubtree(elementName(), "hrSWRunEntry")
            && getVar("hrSWRunType.$*") == 4  // app, not OS or driver





Various Authors      Expires Aug 28, 2002            [Page 25]


Internet Draft    Policy-Based Management MIB November 7, 2001


            && getVar("hrSWRunPerfCPU.$*") > 30000) // 300 seconds

The action:
    // Kill it
    setVar("hrSWRunStatus.$*", 4, Integer); // invalid(4) kills it


A more substantial action to start an RMON2 host table on interfaces
that match the condition:

    var pdu, index;

    pdu = newPDU();
    writeVar(pdu, 0, "hlHostControlDataSource.*",
             "ifIndex." + ev(0), Oid);
    writeVar(pdu, 1, "hlHostControlNlMaxDesiredEntries.*", 1000,
             Integer);
    writeVar(pdu, 2, "hlHostControlAlMaxDesiredEntries.*", 1000,
             Integer);
    writeVar(pdu, 3, "hlHostControlOwner.*", "policy", String);
    writeVar(pdu, 4, "hlHostControlStatus.*", "active(1)", Integer);
    if (createRow(pdu, 5, 4, 20, 65535, index) == 0
        || index == -1)
        return;

Because PolicyScript is a least common denominator, it
contains nothing that would astonish programmers familiar with
C, C++, Perl, Tcl, JavaScript or Python.  While a new
programmer may attempt to use language constructs that aren't
available in PolicyScript, they should be able to understand
any existing PolicyScript and will likely know how to use
anything that is valid in PolicyScript. The lists below
quickly enumerate the changes of note for programmers coming
from some particular languages. These lists won't describe the
unavailable constructs but it is easy to see from the
definition above what is available.


6.3.1.  Quickstart for C Programmers

  - Character constants (i.e. 'c') are treated as one-character
    strings, not integers. So operations like ('M' - 'A') or (x + 'A')
    will not perform as expected.
  - Functions can change the value of arguments even though
    they are not pointers (or called like '&arg').





Various Authors      Expires Aug 28, 2002            [Page 26]


Internet Draft    Policy-Based Management MIB November 7, 2001


  - All variables are in the same scope


6.3.2.  Quickstart for Perl Programmers

  - Comments are '/* comment */' and '// till end of line', not '#'
  - No need to put a '$' in front of variables
  - Strings are compared with ==, <=, < etc. (Details in Sec. 6.2.1)
  - Strings are concatenated with '+'. (Details in Sec. 6.2.1)
  - No variable substitution in "" strings. '' strings are 1 char only.
  - Variables must be declared before use (but no type is necessary)
  - All variables are in the same scope


6.3.3.  Quickstart for TCL Programmers

  - Comments are '/* comment */' and '// till end of line', not '#'
  - No need to put a '$' in front of variables
  - Function calls are func-name(arg1, arg2, ...)
  - Square braces [] don't interpret their contents
  - Double quotes "" surround a string but no substitutions are
    performed ("" is like { } in TCL )
  - Statements are terminated by a semicolon;
  - Instead of "Set a b", use "b = a;"
  - Strings are concatenated with '+'. (Details in Sec. 6.2.1)
  - All variables are in the same scope


6.3.4.  Quickstart for Python Programmers

  - Comments are '/* comment */' and '// till end of line', not '#'
  - Single quotes can be used only for single-character strings ('a')
  - Indentation doesn't matter. Braces {} define blocks.
  - Variables must be declared before use (but no type is necessary)
  - The expression for if and while is always surrounded by
    parenthesis, like "if (x < 5)".
  - 'for' syntax is "for(expression; expression; expression)" (see EBNF).
  - All variables are in the same scope


6.3.5.  Quickstart for JavaScript/ECMAScript/JScript
Programmers

  - Variables must be declared before use.
  - Functions can change the value of arguments





Various Authors      Expires Aug 28, 2002            [Page 27]


Internet Draft    Policy-Based Management MIB November 7, 2001


  - All variables are in the same scope


6.4.  PolicyScript script return values

A PolicyScript script execution is normally ended by the
execution of a return statement, or by having the flow of
execution reach the end of the final statement in the script.
A normal script execution always returns a Boolean value.  If
no explicit value is specified in the return statement, or if
the flow of control proceeds through the end of the script,
the return value is implicitly zero.  If an expression is
provided with the return statement, the expression is
evaluated, and the result of the expression is implicitly
converted with the ToBoolean operator before being returned to
the script execution environment.

The return value of a policyCondition script is used to
determine whether the associated policyAction script is
executed.  If the returned value is zero, the associated
policyAction script is not executed.  If the returned value is
one, the associated policyAction script will be executed.

The return value of a policyAction script is ignored.

A RTE or invocation of the fail() function will cause the
return value of the script to be set to zero.  Note however,
that execution of the defer() or fail() functions may set the
defer attribute so that the lower precedence script may be
executed.  This is independent of the return value of the
policy script execution.


7.  Index information for `this element'

PolicyScript code needs a convenient way to get the components
of the index for "this element" so that they can perform SNMP
operations on it or on related elements.

Two mechanisms are provided.

1. For all OID input parameters to all SNMP Library Functions (but
   not OID utility functions), the token "$n" ('$' followed by an
   integer between 0 and 128) can be used in place of any decimal
   sub-identifier. This token is expanded by the agent at execution





Various Authors      Expires Aug 28, 2002            [Page 28]


Internet Draft    Policy-Based Management MIB November 7, 2001


   time to contain the n'th subid of the index for the current
   element. For example, if the element is interface #7, and the
   objectIdentifier is "1.3.6.1.2.1.2.2.1.3.$0", it will be expanded
   to "1.3.6.1.2.1.2.2.1.3.7". The special token "$*" is expanded to
   contain all of the subidentifiers of the index of the current
   element, separated by '.' characters.

   It is an RTE if a token is specified that is beyond the length of
   the index for the current element.

   Note that the "$n" convention is only active within strings

2. The ec() and ev() functions allow access to the components of the
   index for "this element". ec() takes no argument and returns the
   number of index components that exist. ev() takes an integer
   argument specifying which component of the index (numbered starting
   at 0) and returns an integer containing the value of the n'th
   subidentifier. Refer to the Library functions section for the
   complete definition of ec() and ev().

   For example, if "this element" is frCircuitDLCI.5.57
                                     (ifIndex = 5, DLCI = 57)
         then ec()  returns 2
              ev(0) returns 5
              ev(1) returns 57

   This is helpful when wishing to address a related element.
   Extending the previous example, to find the port speed of the port
   the circuit (above) runs over:

       portSpeed = getVar("ifSpeed." + ev(0));

A script may check the type of "this element" by calling the
elementName() function. While it is possible to write a script
that will work with different types of elements, many scripts
will assume a particular element type and will work
incorrectly if used on different element types.


8.  Library Functions

Library functions are built-in functions available primarily
to provide access to information on the local system or to
more efficiently manipulate this information. A group of
functions is organized into a library, the unit of conformance





Various Authors      Expires Aug 28, 2002            [Page 29]


Internet Draft    Policy-Based Management MIB November 7, 2001


for function implementation. In order to claim conformance to
a library, an implementation must implement all functions in a
library to the specifications of the library.

In order for a management station or a condition or action to
understand if a certain library of functions is implemented,
each library will have a name that it registers in the role
table as a characteristic of the system element ("0.0") in the
default SNMP context. Thus, conformance to a library can be
tested with the roleMatch library function (in the base
library) with the call roleMatch("libraryName", "0.0").


9.  Base Function Library

A standard base library of functions is available to all
systems that implement this specification. This library is
registered with the name "pmBaseFunctionLibrary".

This library contains four types of functions:

  - SNMP library functions
  - Policy library functions
  - Utility functions
  - Library Functions

Note that in the descriptions of these functions below, the
function prototype describes the type of argument expected.
Even though variables are not declared with a particular type,
their contents must be as appropriate for each function
argument. If the type is variable, the keyword 'var' will be
used. If only a string is appropriate, the keyword 'string'
will be used. If only an integer is appropriate, the keyword
'integer' will be used. If the argument is declared as
'string' or 'integer' and a value of a different type is
passed, the argument will be coerced with ToInteger() or
ToString(). Any failure of this coercion will cause an RTE (in
particular for ToInteger(), which will fail if its string-
valued argument is not a well-formed integer).

In the function prototype, if the '&' character precedes the
identifier for an argument, that argument may be modified by
the function (e.g., "integer &result, ...)"). Arguments
without the '&' character cannot be modified by the function.
In a script, modifiable arguments don't need to be preceeded





Various Authors      Expires Aug 28, 2002            [Page 30]


Internet Draft    Policy-Based Management MIB November 7, 2001


by a '&'. It is a RTE if a constant is passed to a modifiable
function argument (regardless of whether the function actually
writes to the argument).

In the function prototype, the '[' and ']' characters surround
arguments that are optional. In PolicyScript code, the
optional argument may only be included if all optional
arguments to the left of it are included. The function may
place restrictions on when an optional argument must, or must
not, be included.

In the function prototype, if a type is listed before the name
of the function, the function returns a value of that type. If
no type is listed, the function returns no value.


9.1.  SNMP Library Functions

Two sets of SNMP Library functions are available with
different situations in mind:

  - Convenience SNMP Functions

    In an effort to keep simple things simple, these functions are
    easy to use and promote easy to understand code. These functions
    will suffice for the majority of situations where a single
    variable is referenced and the desired error recovery is to simply
    (and immediately) give up (and move to the next policy-element
    combination). In more complex cases, the General SNMP Functions
    can be used at the cost of several times the code complexity.

    The convenience SNMP functions are getVar, exists, setVar,
    setRowStatus, createRow, counterRate and searchColumn.

  - General SNMP Functions

    The General SNMP functions allow nearly any legal SNMP Message to
    be generated, including those with multiple varbinds, getNext
    operations, notifications, and messages with explicit addressing
    or security specifications.

    The general SNMP functions are writeVar, readVar, snmpSend,
    readError and writeBulkParameters.







Various Authors      Expires Aug 28, 2002            [Page 31]


Internet Draft    Policy-Based Management MIB November 7, 2001


9.1.1.  SNMP Operations on Non-Local Systems

From time to time, a script may need to perform an operation
on a different SNMP system than that which "this element"
resides on. Scripts may also need to specify the use of
alternate security parameters. In order to do this, the
following optional arguments are provided for the SNMP library
functions:

snmp-function(...[, integer mPModel,
                    string tDomain, string tAddress,
                    integer secModel, string secName,
                    integer secLevel, string contextEngineID
])

for example:

    getVar("sysDescr.0", "", SNMPv3, "snmpUDPDomain",
           "192.168.1.1/161", SNMPv3, "joe", "NoAuthNoPriv");

The use of these arguments is denoted in function definitions
by the keyword 'NonLocalArgs'. The definitions of these
arguments are as follows:

    'mPModel' is the integer value of the SnmpMessageProcessingModel
    to use for this operation.

    'tDomain' is a string containing an ASCII dotted-decimal
    object identifier representing the transport domain to use for
    this operation.

    'tAddress' is a string containing the transport address
    formatted according to the 'tDomain' argument. The ASCII formats
    for various values of 'tDomain' are as follows:
        snmpUDPDomain     As per DISPLAY-HINT for snmpUDPAddress
        snmpCLNSDomain    As per DISPLAY-HINT for snmpOSIAddress
        snmpCONSDomain    As per DISPLAY-HINT for snmpOSIAddress
        snmpDDPDomain     As per DISPLAY-HINT for snmpNBPAddress
        snmpIPXDomain     As per DISPLAY-HINT for snmpIPXAddress
        rfc1157Domain     As per DISPLAY-HINT for snmpUDPAddress
        Other             As per a DISPLAY-HINT of "1x:"

    'secModel' is the integer value of the SnmpSecurityModel to use
    for this operation.






Various Authors      Expires Aug 28, 2002            [Page 32]


Internet Draft    Policy-Based Management MIB November 7, 2001


    'secName' is a string value representing the SnmpSecurityName to
    use for this operation.

    'secLevel' is the integer value of the SnmpSecurityLevel to use
    for this operation.

    An SNMP operation will be sent to the target system using security
    parameters retrieved from a local configuration datastore based on
    'secModel', 'secName' and 'secLevel'. It is the responsibility of
    the agent to ensure that sensitive information in the local
    configuration datastore is used on behalf of the correct
    principals as identified by the security credentials of the last
    entity to modify any object in the condition or action for a
    policy.

    For convenience, constants for 'mPModel', 'secModel' and
    'secLevel' are defined in the "Constants" section below.

    'contextEngineID' is a string representing the contextEngineID of
    the SNMP entity targeted by this operation. If 'tDomain' and
    'tAddress' are provided but 'contextEngineID' is not provided,
    then the operation will be directed to the SNMP entity reachable
    at 'tDomain' and 'tAddress'.

    In order for PolicyScript code to use any of these arguments, all
    optional arguments to the left must be included. 'mPModel',
    'tDomain', 'tAddress', 'secModel', 'secName',  and 'secLevel'
    must be used as a group - if one is specified, they must all be
    specified. 'contextEngineID' may only be specified if all others
    are specified.


9.1.2.  Form of SNMP Values

Many of the library functions have input or output parameters
that may be one of the many SMI data types. The actual type is
not encoded in the value, but rather is specified elsewhere,
possibly by nature of the situation in which it is used. The
exact usage for input and output is:

Any Integer value
    (INTEGER, Integer32, Counter32, Counter64, Gauge32, Unsigned32,
    TimeTicks, Counter64):

    On input:





Various Authors      Expires Aug 28, 2002            [Page 33]


Internet Draft    Policy-Based Management MIB November 7, 2001


      An Integer or a String that can be successfully coerced to an
      Integer with the ToInteger() operator. It is an RTE if
      a string is passed that cannot be converted by ToInteger() into
      an integer.

      A string of the form

        enum_decimal: [ letter | digit | '-' ]* '(' decimal_constant ')'

      will also be accepted. In this case the sequence of characters
      before the parenthesis and the pair of parenthesis themselves
      are completely ignored and the decimal_constant inside the
      parenthesis is converted. Thus, "frame-relay(32)" translates to
      the integer 32.

    On output:
      An Integer containing the returned value.

Octet String
    On input:
      Either a String or an Integer. If an Integer, it will be coerced
      to a String with the ToString() function. This string will be
      used as an unencoded representation of the octet string value.

    On output:
      A String containing the unencoded value of the octet string.

Object Identifier
    On input and on output:
      A String containing a decimal ASCII encoded object identifier
      of the following form:

          oid:       subid [ '.' subid ]* [ '.' ]
          subid:     '0' | decimal_constant

    It is an RTE if an Object Identifier argument is not in the form
    above. Note that a trailing '.' is acceptable and will simply be
    ignored (note however, that a trailing dot could cause a strncmp()
    comparison of two otherwise-identical OIDs to fail - instead use
    oidncmp()).

    Note that ASCII descriptors (e.g. "ifIndex") are never used in
    these encodings "over the wire". They are never returned from
    library functions nor are they ever accepted by them. NMS user
    interfaces are encouraged to allow humans to view object





Various Authors      Expires Aug 28, 2002            [Page 34]


Internet Draft    Policy-Based Management MIB November 7, 2001


    identifiers with ASCII descriptors, but they must translate those
    descriptors to dotted-decimal format before sending them in MIB
    objects to policy agents.

Null
    On input:
      The input is ignored.

    On output:
      A zero length string.



9.1.3.  Convenience SNMP Functions


9.1.3.1.  getVar()

The getVar() function is used to retrieve the value of an SNMP
MIB instance.

     string getVar(string oid [, string contextName, NonLocalArgs])

        'oid' is a string containing an ASCII dotted-decimal
        representation of an object identifier
        (e.g. "1.3.6.1.2.1.1.1.0").

        The optional 'contextName' argument contains the SNMP context
        to operate on. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.

        The optional 'NonLocalArgs' provide addressing and security
        information to perform an SNMP operation on a different system
        than "this element".

        It is an RTE if the queried object identifier value does not
        exist.

        This function returns a string containing the returned value,
        encoded according to the returned type. Note that no actual
        SNMP PDU needs to be generated and parsed when the policy MIB
        agent resides on the same system as the managed elements.

        It is recommended that NMS user interfaces display and allow





Various Authors      Expires Aug 28, 2002            [Page 35]


Internet Draft    Policy-Based Management MIB November 7, 2001


        input of MIB object names by their descriptor values followed
        by the index in dotted-decimal form (e.g., "ifType.7").

9.1.3.2.  exists()

The exists() function is used to verify the existence of an
SNMP MIB instance.

     integer exists(string oid [, string contextName, NonLocalArgs])

        'oid' is a string containing an ASCII dotted-decimal
        representation of an object identifier
        (e.g. "1.3.6.1.2.1.1.1.0").

        The optional 'contextName' argument contains the SNMP context
        to operate on. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.

        The optional 'NonLocalArgs' provide addressing and security
        information to perform an SNMP operation on a different system
        than "this element".

        This function returns the value 1 if the SNMP instance exists
        and 0 if it doesn't exist. Note that no actual SNMP PDU needs
        to be generated and parsed when the policy MIB agent resides
        on the same system as the managed elements.

        It is recommended that NMS user interfaces display and allow
        input of MIB object names by their descriptor values followed
        by the index in dotted-decimal form (e.g., "ifType.7").

9.1.3.3.  setVar()

The setVar() function is used to set a MIB instance to a
certain value. The setVar() function is only valid in
policyActions.

    setVar(string oid, var value, integer type
           [, string contextName, NonLocalArgs] )

        'oid' is a string containing an ASCII dotted-decimal
        representation of an object identifier
        (e.g. "1.3.6.1.2.1.1.1.0").






Various Authors      Expires Aug 28, 2002            [Page 36]


Internet Draft    Policy-Based Management MIB November 7, 2001


        'value' is a string encoded in the format appropriate to
        the 'type' parameter. The agent will set the variable
        specified by 'oid' to the value specified by 'value'.

        'type' will be the type of the 'value'' parameter and will
        be set to one of the values for DataType Constants.

        The optional 'contextName' argument contains the SNMP context
        to operate on. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.

        The optional 'NonLocalArgs' provide addressing and security
        information to perform an SNMP operation on a different system
        than "this element". Note that no actual SNMP PDU needs
        to be generated and parsed when the policy MIB agent resides
        on the same system as the managed elements.

        It is an RTE if the set encounters any error.

        It is recommended that NMS user interfaces display and allow
        input of MIB object names by their descriptor values followed
        by the index in dotted-decimal form (e.g., "ifType.7").

9.1.3.4.  searchColumn()

    integer searchColumn(string columnoid, string &oid,
                         string pattern, integer mode
                         [, string contextName, NonLocalArgs])

        searchColumn performs an SNMP walk on a portion of the MIB
        searching for objects with values equal to the `pattern'
        parameter.

        'columnoid' constrains the search to only those variables that
        share the same OID prefix (i.e. are beneath it in the OID
        tree).

        A getnext request will be sent requesting the object
        identifier 'oid'. If 'oid' is an empty string, the value of
        'columnoid' will be sent.

        The value returned in each response packet will be transformed
        to a string representation of the value of the returned
        variable. The string representation of the value will be





Various Authors      Expires Aug 28, 2002            [Page 37]


Internet Draft    Policy-Based Management MIB November 7, 2001


        formed by putting the value in the form dictated by the "Form
        of SNMP Values" rules, and then performing the ToString()
        function on this value, forming 'SearchString'.

        The 'mode' value controls what type of match to perform on
        this 'SearchString' value. There are 6 possibilities for mode:

            mode       Search Action
               0       Case sensitive exact match of 'pattern'
                       and 'SearchString'
               1       Case insensitive exact match of 'pattern'
                       and 'SearchString'
               2       Case sensitive substring match, finding
                       'pattern' in 'SearchString'
               3       Case insensitive substring match, finding
                       'pattern' in 'SearchString'
               4       Case sensitive regular expression match,
                       searching 'SearchString' for the regular
                       expression given in 'pattern'.
               5       Case insensitive regular expression match,
                       searching 'SearchString' for the regular
                       expression given in 'pattern'.


        searchColumn uses the POSIX extended regular expressions
        defined in POSIX 1003.2.

        The optional 'contextName' argument contains the SNMP context
        to operate on. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.

        The optional 'NonLocalArgs' provide addressing and security
        information to perform SNMP operations on a different system
        than "this element".

        If a match is found, 'oid' is set to the OID of the matched
        value and 1 is returned. If the search traverses beyond
        columnoid or returns an error without finding a match, zero is
        returned and 'oid' isn't modified.

        To find the first match, the caller should set 'oid' to the
        empty string. To find additional matches, subsequent calls to
        searchColumn should have 'oid' set to the OID of the last
        match, an operation that searchColumn performs automatically.





Various Authors      Expires Aug 28, 2002            [Page 38]


Internet Draft    Policy-Based Management MIB November 7, 2001


        For example:
            To find an ethernet interface
            oid = "";
            searchColumn("ifType", oid, "6", 0);

        This sends a getnext request for ifType and continues to walk
        the tree until a value matching 6 is found or a variable
        returns that is not in the 'ifType' subtree.

        To find the next ethernet interface, assuming interface #3
        was discovered to be the first:
            oid = "ifType.3";
            searchColumn("ifType", oid, "6", 0);

        In a loop to determine all the ethernet interfaces, this looks
        simply like:
            oid = "";
            while(searchColumn("ifType", oid, "6", 0)){
              /* Do something with oid */
            }

        Note that in the preceding examples, "ifType" is used as a
        notational convenience and the actual code downloaded to the
        policy MIB agent must use the string "1.3.6.1.2.1.2.2.1.3" as
        there may be no MIB compiler (or MIB file) available on the
        policy MIB agent.

        Note that if the value of 'columnoid' is too short and thus
        references too much of the object identifier tree
        (e.g. "1.3.6"), 'columnoid' could end up searching a huge
        number of variables (if it was "1.3.6", it would search ALL
        variables on the agent). It is the responsibility of the
        caller to make sure that 'columnoid' is set appropriately.


9.1.3.5.  setRowStatus()

    integer setRowStatus(string oid, integer maxTries
                         [, integer freeOnException , integer seed
                          , string contextName, NonLocalArgs])

        setRowStatus is used to automate the process of finding an
        unused row in a read-create table that uses RowStatus whose
        index contains an arbitrary integer component for uniqueness.






Various Authors      Expires Aug 28, 2002            [Page 39]


Internet Draft    Policy-Based Management MIB November 7, 2001


        'oid' is a string containing an ASCII dotted-decimal
        representation of an object identifier, with one of
        the subids replaced with a '*' character
        (e.g. "1.3.6.1.3.1.99.1.2.1.9.*"). 'oid' must reference an
        'instance' of the RowStatus object and the '*' must replace
        any integer index item that may be set to some random value.

        setRowStatus will come up with a number for the selected index
        item and will attempt to create the instance with the
        createAndWait state. If the attempt fails, it will retry with
        a different random index value. It will attempt this no more
        than 'maxTries' times.

        If the optional 'freeOnException' argument is present and
        equal to 1, the agent will free this row by setting RowStatus
        to 'destroy' if later in the same script invocation this
        script dies with a run-time exception or by a call to fail().
        Note that this does not apply to exceptions experienced in
        subsequent invocations of the script.

        If the optional 'seed' argument is present, the initial index
        will be set to 'seed'. Otherwise it will be random. 'seed' may
        not be present if the 'freeOnException' argument is not
        present.

        The optional 'contextName' argument contains the SNMP context
        to operate on. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.

        The optional 'NonLocalArgs' provide addressing and security
        information to perform an SNMP operation on a different system
        than "this element".

        setRowStatus returns the successful integer value for the
        index. If unsuccessful after 'maxTries' or if zero or more
        than one '*' is in OID, -1 will be returned.

        The createRow function (below) can also be used when adding
        rows to tables. While createRow has more functionality,
        setRowStatus may be preferable in certain situations (for
        example to have the opportunity to inspect default values
        created by the agent).







Various Authors      Expires Aug 28, 2002            [Page 40]


Internet Draft    Policy-Based Management MIB November 7, 2001


9.1.3.6.  createRow()

    integer createRow(integer reqPDU, integer reqNumVarbinds,
                      integer statusColumn, integer maxTries,
                      integer indexRange,
                      integer &respPDU, integer &respNumVarbinds,
                      integer &index
                      [, integer freeOnException, string contextName,
                      NonLocalArgs])

        createRow is used to automate the process of creating a row in
        a read-create table whose index contains an arbitrary integer
        component for uniqueness. In particular, it encapsulates the
        algorithm behind using either the createAndWait or createAndGo
        mechanism and the algorithm for finding an unused row in the
        table.

        createRow will perform the operation by sending 'reqPDU'
        and returning the results in 'respPDU'. Both 'reqPDU' and
        'respPDU' must previously have been allocated with
        newPDU. 'reqPDU' and 'respPDU' may both contain the same PDU
        handle, in which case the 'reqPDU' is sent and then replaced
        with the contents of the received PDU.

        'reqNumVarbinds' is a integer greater than zero that specified
        which varbinds in the PDU will be used in this operation. The
        first 'reqNumVarbinds' in the PDU are used. Each such varbind
        must be of a special form in which the object name must have
        one of its subids replaced with a '*' character
        (e.g. "1.3.6.1.3.1.99.1.2.1.9.*"). The subid selected to be
        replaced will be an integer index item that may be set to some
        random value. The same subid should be selected in each
        varbind in the PDU.

        'respNumVarbinds' will be modified to contain the number
        of varbinds received in last response PDU.

        'statusColumn' identifies which varbind in 'pdu' should be
        treated as the RowStatus column, where 0 identifies the 1st
        varbind.

        createRow will come up with a random integer index value
        and will substitute that value in place of the '*' subid in
        each varbind. It will then set the value of the RowStatus
        column to select the 'createAndGo' mechanism and execute the





Various Authors      Expires Aug 28, 2002            [Page 41]


Internet Draft    Policy-Based Management MIB November 7, 2001


        set. If the attempt fails due to unavailability of the
        'createAndGo' mechanism, it will retry with the
        'createAndWait' mechanism selected. If the attempt fails due
        to the chosen index value already in use, the operation will
        be retried with a different random index value. It will
        continue to retry different index values until it succeeds,
        until it has made 'maxTries' attempts, or until it encounters
        an error.

        All random index values must be between 1 and 'indexRange',
        inclusive. This is so that values are not attempted for an
        index that fall outside of that index's restricted range
        (e.g. 1..65535).

        If the optional 'freeOnException' argument is present and
        equal to 1, the agent will free this row by setting RowStatus
        to 'destroy' if later in the same script invocation this
        script dies with a run-time exception or by a call to fail().
        Note that this does not apply to exceptions experienced in
        subsequent invocations of the script.

        The optional 'contextName' argument contains the SNMP context
        to operate on. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.

        The optional 'NonLocalArgs' provide addressing and security
        information to perform an SNMP operation on a different system
        than "this element".

        Note that no actual SNMP PDU needs to be generated and parsed
        when the policy MIB agent resides on the same system as the
        managed elements. If no PDU is generated, the agent must
        correctly simulate the behavior of the SNMP Response PDU,
        particularly in case of an error.

        This function returns zero unless an error occurs in which
        case it returns the proper SNMP Error Constant. If an error
        occurred, respPDU will contain the last response PDU as
        received from the agent unless no response PDU was received in
        which case respNumVarbinds will be 0. In any event, readError
        may be called on the pdu to determine error information for
        the transaction.

        The 'index' parameter returns the chosen index. If successful,





Various Authors      Expires Aug 28, 2002            [Page 42]


Internet Draft    Policy-Based Management MIB November 7, 2001


        'index' will be set to the successful integer index. If no
        SNMP error occurs but the operation does not succeed due to
        the following reasons, 'index' will be set to -1:
            1) Unsuccessful after 'maxTries'
            2) An object name had no '*' in it
            3) An object name had more than one '*' in it

        For example, createRow() might be used as follows:

          var index, pdu = newPDU(), nVars = 0;

          writeVar(pdu, nVars++, "hlHostControlDataSource.*",
                   "ifIndex." + ev(0), Oid);
          writeVar(pdu, nVars++, "hlHostControlNlMaxDesiredEntries.*",
                   1000, Integer);
          writeVar(pdu, nVars++, "hlHostControlAlMaxDesiredEntries.*",
                   1000, Integer);
          writeVar(pdu, nVars++, "hlHostControlOwner.*", "policy",
                   String);
          writeVar(pdu, nVars++, "hlHostControlStatus.*", "active(1)",
                   Integer);
          if (createRow(pdu, nVars, 4, 20, 65535,
                        pdu, nVars, index) == 0
              || index == -1)
              return;
          // index now contains index of new row



9.1.3.7.  counterRate()

When a policy wishes to make a decision based on the rate of a
counter, it faces a couple of problems:

1. It may need to run every X minutes, but need to make
   decisions on rates calculated over at least Y minutes
   where Y > X. This would require the complexity of managing
   a queue of old counter values.
2. The policy script has no control over exactly when it
   will run

The counterRate() function is designed to easily surmount
these problems.

    integer counterRate(string oid, integer minInterval





Various Authors      Expires Aug 28, 2002            [Page 43]


Internet Draft    Policy-Based Management MIB November 7, 2001


                        [, integer 64bit,
                        string discOid, integer discMethod,
                        string contextName, NonLocalArgs])

        counterRate retrieves the variable specified by oid once per
        invocation. It keeps track of timestamped values retrieved on
        previous invocations by this execution context so that it can
        calculate a rate over a longer period than since the last
        invocation.

        'oid' is the object identifier of the counter value that will
        be retrieved.  The most recent previously-saved value of the
        same object identifier that is at least 'minInterval'
        seconds old will be subtracted from the newly-retrieved value,
        yielding a delta. If 'minInterval' is zero, this delta will be
        returned. Otherwise, this delta will be divided by the number
        of seconds elapsed between the two retrievals and the
        integer-valued result will be returned (rounding down when
        necessary).

        If there was no previously-saved retrieval older than
        'minInterval' seconds, then -1 will be returned. It is an RTE
        if the query returns noSuchName or noSuchObject or an object
        that is not of type Counter32 or Counter64.

        The delta calculation will allow for 32-bit counter semantics
        if it encounters rollover between the two retrievals unless
        the optional argument '64bit' is present and equal to 1,
        in which case it will allow for 64-bit counter semantics.

        'discOid' and 'discMethod' may only be present together.
        'discOid' contains an object identifier of a discontinuity
        indicator value that will be retrieved simultaneously with
        each counter value:

            1. If 'discMethod' is equal to 1 and the discontinuity
               indicator is less than the last one retrieved, then a
               discontinuity is indicated.
            2. If 'discMethod' is equal to 2 and the discontinuity
               indicated is different than the last one retrieved,
               then a discontinuity is indicated.

        If this value indicates a discontinuity, this counter value
        (and its timestamp) will be stored, but all previously stored
        counter values will be invalidated and -1 will be returned.





Various Authors      Expires Aug 28, 2002            [Page 44]


Internet Draft    Policy-Based Management MIB November 7, 2001


        The implementation will need to store a number of timestamped
        counter values. The implementation must keep all values that
        are newer than minInterval seconds plus the newest value that
        is older than minInterval seconds. Other than this one value
        that is older than minInterval seconds, the implementation
        should discard any older values.

        For example:
          Policy which executes every 60 seconds:
              rate = counterRate("ifInOctets.$*", 300);
              if (rate > 1000000)
                  ...

        Another example with discontinuity indicator:

          Policy which executes every 60 seconds:
              rate = counterRate("ifInOctets.$*", 300, 0,
                                 "sysUpTime.0", 1);
              if (rate > 1000000)
                  ...

        Another example with zero minInterval:
          Policy which executes every 60 seconds:
              delta = counterRate("ifInErrors.$*", 0);
              if (delta > 100)
                  ...

        The optional 'contextName' argument contains the SNMP context
        to operate on. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.




9.1.4.  General SNMP Functions

It is desirable for a general SNMP interface have the ability
to perform SNMP operations on multiple variables at once and
for it to allow multiple varbind lists to exist at once. The
newPdu, readVar and writeVar functions exist in order to
provide these facilities in a language without pointers,
arrays and memory allocators.

newPDU is called to allocate a PDU and return an integer





Various Authors      Expires Aug 28, 2002            [Page 45]


Internet Draft    Policy-Based Management MIB November 7, 2001


handle to it. Since PDUs are automatically freed when the
script exits and because they can be reused during execution,
there is no freePDU().

readVar and writeVar access a variable length varbind list for
a PDU. The PDU handle and the index of the variable within
that PDU are specified in every readVar and writeVar
operation. Once a PDU has been fully specified by one or more
calls to writeVar, it is passed to snmpSend (by referencing
the PDU handle) and the number of varbinds to be included in
the operation. When a response is returned, the contents of
the response are returned in another PDU and may be read by
one or more calls to readVar. Error information may be read
from the PDU with the readError function. Because GetBulk PDUs
send additional information in the SNMP header, the
writeBulkParameters function is provided to configure these
parameters.

Varbinds in this data store are created automatically whenever
they are written by any writeVar or snmpSend operation.

For example:
  var pdu = newPDU();
  var nVars = 0, oid, type, value;

  writeVar(pdu, nVars++, "sysDescr.0", "", Null);
  writeVar(pdu, nVars++, "sysOID.0", "", Null);
  writeVar(pdu, nVars++, "ifNumber.0", "", Null);
  if (snmpSend(pdu, nVars, Get, pdu, nVars))
      return;
  readVar(pdu, 0, oid, value, type);
  readVar(pdu, 1, oid, value, type);
  readVar(pdu, 2, oid, value, type);
  ...

or,
  var pdu = newPDU();
  var nVars = 0, oid1, oid2;

  writeVar(pdu, nVars++, "ifIndex", "", Null);
  writeVar(pdu, nVars++, "ifType", "", Null);
  while(!done){
    if (snmpSend(pdu, nVars, Getnext, pdu, nVars))
        continue;
    readVar(pdu, 0, oid1, value, type);





Various Authors      Expires Aug 28, 2002            [Page 46]


Internet Draft    Policy-Based Management MIB November 7, 2001


    readVar(pdu, 1, oid2, value, type);
    /* leave OIDs alone, now PDU #0 is set up for next step
       in table walk. */
    if (oidncmp(oid1, "ifIndex", oidlen("ifIndex")))
      done = 0;
    ...
  }


Note that in the preceding examples, descriptors such as
ifType and sysDescr are used in object identifiers solely as a
notational convenience and the actual code downloaded to the
policy MIB agent must use a dotted decimal notation only, as
there may be no MIB compiler (or MIB file) available on the
policy MIB agent.

To be conformant to this specification, implementations must
allow each policy script invocation to allocate at least 5
PDUs with at least 64 varbinds per list. It is suggested that
implementations limit the total number of PDUs per invocation
to protect other script invocations from a malfunctioning
script (e.g. a script that calls newPDU() in a loop).


9.1.4.1.  newPDU()

    integer newPDU()

        newPDU will allocate a new PDU and return a handle to the
        PDU. If no PDU could be allocated, -1 will be returned. The
        PDU's initial values of nonRepeaters and maxRepetitions will
        be zero.


9.1.4.2.  writeVar()

    writeVar(integer pdu, integer varBindIndex,
             string oid, var value, integer type)

        writeVar will store 'oid', 'value' and 'type' in
        the specified varbind.

        'pdu' is the handle to a PDU allocated by newPDU().

        'varBindIndex' is a non-negative integer that identifies the





Various Authors      Expires Aug 28, 2002            [Page 47]


Internet Draft    Policy-Based Management MIB November 7, 2001


        varbind within the specified PDU modified by this call. The
        first varbind is number 0.

        'oid' is a string containing an ASCII dotted-decimal
        representation of an object identifier
        (e.g. "1.3.6.1.2.1.1.1.0").

        'value' is the value to be stored, of a type appropriate to the
        'type' parameter.

        'type' will be the type of the value parameter and will be set
        to one of the values for DataType Constants.

        It is an RTE if any of the parameters don't conform to the
        rules above.



9.1.4.3.  readVar()

    int readVar(integer pdu, integer varBindIndex,
            string &oid, var &value, integer &type)

        readVar will retrieve the oid, the value and its type
        from the specified varbind.

        'pdu' is the handle to a PDU allocated by newPDU().

        'varBindIndex' is a non-negative integer that identifies the
        varbind within the specified PDU read by this call. The
        first varbind is number 0.

        The object identifier value of the referenced varbind will be
        copied into the 'oid' parameter, formatted in an ASCII
        dotted-decimal representation (e.g. "1.3.6.1.2.1.1.1.0").

        'value' is the value retrieved, of a type appropriate to the
        'type' parameter.

        'type' is the type of the value parameter and will be set to
        one of the values for DataType Constants.

        This function returns 1 when successful.
        If 'pdu' doesn't reference a valid PDU or 'varBindIndex'
        doesn't reference a valid varbind, the function returns 0





Various Authors      Expires Aug 28, 2002            [Page 48]


Internet Draft    Policy-Based Management MIB November 7, 2001


        and doesn't modify 'oid', 'value' or 'type'.





9.1.4.4.  snmpSend()

    integer snmpSend(integer reqPDU, integer reqNumVarbinds,
                     integer opcode,
                     integer &respPDU, integer &respNumVarbinds,
                     [, string contextName , NonLocalArgs] )

        snmpSend will perform an SNMP operation by sending 'reqPDU'
        and returning the results in 'respPDU'. Both 'reqPDU' and
        'respPDU' must previously have been allocated with
        newPDU. 'reqPDU' and 'respPDU' may both contain the same PDU
        handle, in which case the 'reqPDU' is sent and then replaced
        with the contents of the received PDU. If the opcode specifies
        a Trap or V2trap, 'respPDU' will not be modified.

        'reqNumVarbinds' is a integer greater than zero that specified
        which varbinds in the PDU will be used in this
        operation. The first 'reqNumVarbinds' in the PDU are
        used. 'respNumVarbinds' will be modified to contain the number
        of varbinds received in the response PDU which in the case of
        GetBulk or an error may be substantially different than
        reqNumVarbinds.

        'opcode' is the type of SNMP operation to perform and must be
        one of the values for SNMP Operation Constants listed
        in the 'Constants' section below.

        The optional 'contextName' argument contains the SNMP context
        to operate on. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.

        The optional 'NonLocalArgs' provide addressing and security
        information to perform an SNMP operation on a different system
        than "this element".

        Note that no actual SNMP PDU needs to be generated and parsed
        when the policy MIB agent resides on the same system as the
        managed elements. If no PDU is generated, the agent must





Various Authors      Expires Aug 28, 2002            [Page 49]


Internet Draft    Policy-Based Management MIB November 7, 2001


        correctly simulate the behavior of the SNMP Response PDU,
        particularly in case of an error.

        This function returns zero unless an error occurs in which
        case it returns the proper SNMP Error Constant. If an error
        occurred, respPDU will contain the response PDU as received
        from the agent unless no response PDU was received in which
        case respNumVarbinds will be 0. In any event, readError may be
        called on the pdu to determine error information for the
        transaction.

        If a SNMP Version 1 trap is requested (the opcode is Trap(4)),
        then SNMP Version 2 trap parameters are supplied and
        converted according to the rules of [RFC2576] section 3.2.
        The first variable binding must be sysUpTime.0, and the second
        must be snmpTrapOID.0 [RFC1905, section 4.2.6].  Subsequent
        variable bindings are copied to the SNMP Version 1 trap PDU in
        the usual fashion.


9.1.4.5.  readError()

    readError(integer pdu, integer numVarbinds, integer &errorStatus,
              integer &errorIndex, integer &hasException)

    Returns the error information in a PDU.

    'errorStatus' contains the error-status field from the response
    PDU or a local error constant if the error was generated
    locally. If no error was experienced or no PDU was ever copied
    into this PDU, this value will be 0.

    'errorIndex' contains the error-index field from the response
    PDU. If no PDU was ever copied into this PDU, this value will
    be 0.

    'hasException' will be 1 if any of the first 'numVarbinds'
    varbinds in the PDU contain an exception (Nosuchobject,
    Nosuchinstance, Endofmibview), otherwise it will be 0.


9.1.4.6.  writeBulkParameters()

    writeBulkParameters(integer pdu, integer nonRepeaters,
                        integer maxRepetitions)





Various Authors      Expires Aug 28, 2002            [Page 50]


Internet Draft    Policy-Based Management MIB November 7, 2001


    Modifies the parameters in a PDU in any subsequent GetBulk
    operation sent by the PDU. 'nonRepeaters' will be copied into the
    PDU's non-repeaters field and 'maxRepetitions' will be copied into
    the max-repetitions field.

    This function may be called before or after writeVar is called to
    add varbinds to the pdu, but must be called before the pdu is sent
    or else it will have no effect. A new PDU is initialized with
    nonRepeaters set to zero and maxRepetitions set to zero - if a
    Bulk PDU is sent before writeBulkParameters is called, these
    default values will be used. If writeBulkParameters is called to
    modify a pdu, it is acceptable if that PDU is later sent as a type
    other than bulk - the writeBulkParameters call will only affect
    subsequent sends of Bulk PDUs. If a PDU is used to receive the
    contents of a response, the values of nonRepeaters and
    maxRepetitions are never modified.



9.2.  Constants

The following constants are defined for use with all SNMP
Library Functions. Policy code will be executed in an
environment where the following constants are declared. (Note
that the constant declarations below will not be visible in
the policyCondition or policyAction code.) These constants are
reserved words and cannot be used for any variable or function
name.

While these declarations are expressed here as C 'const's, the
'const' construct itself is not available to be used in policy
code.

  // Datatype Constants

  const integer Integer       = 2;
  const integer Integer32     = 2;
  const integer String        = 4;
  const integer Bits          = 4;
  const integer Null          = 5;
  const integer Oid           = 6;
  const integer IpAddress     = 64;
  const integer Counter32     = 65;
  const integer Gauge32       = 66;
  const integer Unsigned32    = 66;





Various Authors      Expires Aug 28, 2002            [Page 51]


Internet Draft    Policy-Based Management MIB November 7, 2001


  const integer TimeTicks     = 67;
  const integer Opaque        = 68;
  const integer Counter64     = 70;

  // SNMP Exceptions
  const integer NoSuchObject         = 128;
  const integer NoSuchInstance       = 129;
  const integer EndOfMibView         = 130;

  // SNMP Error Constants

  const integer NoError              = 0;
  const integer TooBig               = 1;
  const integer NoSuchName           = 2;
  const integer BadValue             = 3;
  const integer ReadOnly             = 4;
  const integer GenErr               = 5;
  const integer NoAccess             = 6;
  const integer WrongType            = 7;
  const integer WrongLength          = 8;
  const integer WrongEncoding        = 9;
  const integer WrongValue           = 10;
  const integer NoCreation           = 11;
  const integer InconsistentValue    = 12;
  const integer ResourceUnavailable  = 13;
  const integer CommitFailed         = 14;
  const integer UndoFailed           = 15;
  const integer AuthorizationError   = 16;
  const integer NotWritable          = 17;
  const integer InconsistentName     = 18;

  // "Local" Errors
  // These are also possible choices for errorStatus returns

  // For example: unknown PDU, maxVarbinds is bigger than number written
  // with writeVar, unknown opcode, etc.
  const integer BadParameter         = 1000;

  // Request would have created a PDU larger than local limitations
  const integer TooLong              = 1001;

  // A response to the request was received but errors were encountered
  // when parsing it.
  const integer ParseError           = 1002;






Various Authors      Expires Aug 28, 2002            [Page 52]


Internet Draft    Policy-Based Management MIB November 7, 2001


  // Local system has complained of an authentication failure
  const integer AuthFailure          = 1003;

  // No valid response was received in a timely fashion
  const integer TimedOut             = 1004;

  // General local failure including lack of resources
  const integer GeneralFailure       = 1005;

  // SNMP Operation Constants

  const integer Get                  = 0;
  const integer Getnext              = 1;
  const integer Set                  = 3;
  const integer Trap                 = 4;
  const integer Getbulk              = 5;
  const integer Inform               = 6;
  const integer V2trap               = 7;

  // Constants for SnmpMessageProcessingModel and SnmpSecurityModel
  // Note that these constants don't match the 'over the wire' constants
  // for SnmpSecurityModel

  const integer SNMPv1              = 0;
  const integer SNMPv2c             = 1;
  const integer SNMPv3              = 3;

  // SnmpSecurityLevel Constants

  const integer NoAuthNoPriv        = 1;
  const integer AuthNoPriv          = 2;
  const integer AuthPriv            = 3;



9.3.  Policy Library Functions

Policy Library Functions provide access to information
specifically related to the execution of policies.


9.3.1.  elementName()

The elementName() function is used to determine what the
current element is and can be used to provide information





Various Authors      Expires Aug 28, 2002            [Page 53]


Internet Draft    Policy-Based Management MIB November 7, 2001


about the type of element as well as how it is indexed.

    string elementName()

        elementName returns a string containing an ASCII
        dotted-decimal representation of an object identifier
        (e.g. 1.3.6.1.2.1.1.1.0). This object identifier identifies an
        instance of a MIB object that is an attribute of this element.


9.3.2.  elementAddress()

    elementAddress(&tDomain, &tAddress)

        elementAddress finds a domain/address pair that can be used to
        access "this element" and returns the values in 'tDomain' and
        'tAddress'.


9.3.3.  elementContext()

    string elementContext()

        elementContext() returns a string containing the SNMP
        contextName of "this element".


9.3.4.  ec()

The ec() (element count) and ev() (element value) functions
provide convenient access to the components of the index for
"this element".  Typical uses will be in creating the index to
other, related elements.

    integer ec()

        ec() returns an integer count of the number of index
        subidentifiers that exist in the index for "this element".


9.3.5.  ev()

    integer ev(integer n)

        ev() returns the value of the n'th subidentifier in the index





Various Authors      Expires Aug 28, 2002            [Page 54]


Internet Draft    Policy-Based Management MIB November 7, 2001


        for 'this element". The first subidentifier is indexed at
        0. It is an RTE if 'n' specifies a subidentifier beyond the
        last subidentifier.


9.3.6.  roleMatch()

The roleMatch() function is used to check to see if an element
has been assigned a particular role.

    integer roleMatch(string roleString [, string element,
                      string contextName, string contextEngineID])

        'roleString' is a string. The optional argument
        'element' contains the OID name of an element, defaulting
        to the current element if 'element' is not supplied.
        If roleString exactly matches (content and length) any role
        assigned to the specified element, the function returns 1. If
        no roles match, the function returns 0.

        The optional 'contextName' argument contains the SNMP context
        of the element to match. If 'contextName' is not present,
        this element's contextName will be used. If 'contextName' is
        the zero length string, the default context is used.

        'contextEngineID' contains the contextEngineID of the remote
        system that 'element' resides on. It is encoded as a pair of
        hex digits (upper and lower case are valid) for each octet of
        the contextEngineID. If 'contextEngineID' is not present, the
        local system will be used. 'contextEngineID' may only be
        present if the 'element' and 'context' arguments are present.


9.3.7.  Scratchpad Functions

Every maxLatency time period, every policy runs once for each
element. When the setScratchpad function executes, it stores a
value named by a string that can be retrieved with
getScratchpad() even after this policy execution code exits.
This allows sharing of data between a condition and an action,
two conditions executing on different elements, or even
different policies altogether.

The value of 'scope' controls which policy/element
combinations can retrieve this 'varName'/'value' pair. The





Various Authors      Expires Aug 28, 2002            [Page 55]


Internet Draft    Policy-Based Management MIB November 7, 2001


options for 'scope' are:

    Global
        The 'varName'/'value' combination will be available in the
        condition or action of any policy while executing on any
        element.

    Policy
        The 'varName'/'value' combination will be available in any
        future execution of the condition or action of the current
        policy (regardless of what element the policy is executing
        on). If a policy is ever deleted or its condition or action
        code is modified, all values in its 'Policy' scope will be
        deleted.

    PolicyElement
        The 'varName'/'value' combination will be available in future
        executions of the condition or action of the current policy
        but only when the policy is executing on the current
        element. If a policy is ever deleted or its condition or
        action code is modified, all values in its 'PolicyElement'
        scope will be deleted. The agent may also periodically delete
        values in a 'PolicyElement' scope if the corresponding element
        does not exist (in other words, if an element disappears for a
        period and reappears, values in its 'PolicyElement' scope may
        or may not be deleted).

setScratchpad's 'storageType' argument allows the script to
control the lifetime of a variable stored in the scratchpad.
If the storageType is equal to the constant 'volatile', then
this variable must be deleted on a reboot. If it is equal to
'nonVolatile', then this variable should be stored in non-
volatile storage where it will be available after a reboot. If
the 'storageType' argument is not present, the variable will
be volatile and will be erased on reboot.

If the optional 'freeOnException' argument is present and
equal to 1, the agent will free this variable if later in the
same script invocation this script dies with a run-time
exception or by a call to fail() (note that this does not
apply to exceptions experienced in subsequent invocations of
the script).

Note that there may be implementation-specific limits on the
number of scratchpad variables that can be allocated. The





Various Authors      Expires Aug 28, 2002            [Page 56]


Internet Draft    Policy-Based Management MIB November 7, 2001


limit of unique scratchpad variables may be different for each
scope or storageType. It is suggested that implementations
limit the total number of scratchpad variables per script to
protect other scripts from a malfunctioning script.

Scratchpad Usage Examples


      Policy  Element    Action
      A       ifIndex.1  setScratchpad(Global, "foo", "55")
      A       ifIndex.1  getScratchpad(Global, "foo", val) --> 55
      A       ifIndex.2  getScratchpad(Global, "foo", val) --> 55
      B       ifIndex.2  getScratchpad(Global, "foo", val) --> 55
      B       ifIndex.2  setScratchpad(Global, "foo", "16")
      A       ifIndex.1  getScratchpad(Global, "foo", val) --> 16

      Policy  Element    Action
      A       ifIndex.1  setScratchpad(Policy, "bar", "75")
      A       ifIndex.1  getScratchpad(Policy, "bar", val) --> 75
      A       ifIndex.2  getScratchpad(Policy, "bar", val) --> 75
      B       ifIndex.1  getScratchpad(Policy, "bar", val) not found
      B       ifIndex.1  setScratchpad(Policy, "bar", "20")
      A       ifIndex.2  getScratchpad(Policy, "bar", val) --> 75
      B       ifIndex.2  getScratchpad(Policy, "bar", val) --> 20

      Policy  Element    Action
      A       ifIndex.1  setScratchpad(PolicyElement, "baz", "43")
      A       ifIndex.1  getScratchpad(PolicyElement, "baz", val) --> 43
      A       ifIndex.2  getScratchpad(PolicyElement, "baz", val) not found
      B       ifIndex.1  getScratchpad(PolicyElement, "baz", val) not found
      A       ifIndex.2  setScratchpad(PolicyElement, "baz", "54")
      B       ifIndex.1  setScratchpad(PolicyElement, "baz", "65")
      A       ifIndex.1  getScratchpad(PolicyElement, "baz", val) --> 43
      A       ifIndex.2  getScratchpad(PolicyElement, "baz", val) --> 54
      B       ifIndex.1  getScratchpad(PolicyElement, "baz", val) --> 65

      Policy  Element    Action
      A       ifIndex.1  setScratchpad(PolicyElement, "foo", "11")
      A       ifIndex.1  setScratchpad(Global,        "foo", "22")
      A       ifIndex.1  getScratchpad(PolicyElement, "foo", val) --> 11
      A       ifIndex.1  getScratchpad(Global,        "foo", val) --> 22

Constants

The following constants are defined for use for the scratchpad





Various Authors      Expires Aug 28, 2002            [Page 57]


Internet Draft    Policy-Based Management MIB November 7, 2001


functions. Policy code will be executed in an environment
where the following constants are declared. (Note that these
constant declarations will not be visible in the
policyCondition or policyAction MIB objects.)

While these declarations are expressed here as C 'const's, the
'const' construct itself is not available to be used inside of
policy code.

  // Scratchpad Constants

  // Values of scope
  const integer Global           = 0;
  const integer Policy           = 1;
  const integer PolicyElement    = 2;

  // Values of storageType
  const integer Volatile         = 0;
  const integer NonVolatile      = 1;





9.3.8.  setScratchpad()

    setScratchpad(integer scope, string varName [, string value,
                  integer storageType, integer freeOnException ])

        The setScratchpad function stores a value that can be
        retrieved even after this policy execution code exits.

        The value of 'scope' controls which policy/element
        combinations can retrieve this 'varName'/'value' pair. The
        options for 'scope' are Global, Policy, and PolicyElement.


        'varName' is a string used to identify the value. Subsequent
        retrievals of the same 'varName' in the proper scope will
        return the value stored. Note that the namespace for 'varName'
        is distinct for each scope. 'varName' is case sensitive.

        'value' is a string containing the value to be stored.
        ToString(value) is called on 'value' to convert it
        to a string before storage.





Various Authors      Expires Aug 28, 2002            [Page 58]


Internet Draft    Policy-Based Management MIB November 7, 2001


        If the 'value' argument this missing, the effect will be to
        delete 'varName' in scope 'scope' if it exists.

        If the optional 'storageType' argument is present and is equal
        to the constant 'Volatile', then this variable must be deleted
        on a reboot. If it is equal to 'NonVolatile', then this
        variable should be stored in non-volatile storage where it
        will be available after a reboot. If the 'storageType'
        argument is not present, the variable will be volatile and
        will be erased on reboot. 'storageType' may not be present if
        the 'value' argument is not present. If the variable already
        existed, its previous storageType is updated according to the
        current 'storageType' argument.

        If the optional 'freeOnException' argument is present and
        equal to 1, the agent will free this variable if later in the
        same script invocation this script dies with a run-time
        exception or by a call to fail() (note that this does not
        apply to exceptions experienced in subsequent invocations of
        the script).


9.3.9.  getScratchpad()

    integer getScratchpad(integer scope, string varName,
                          string &value)

        The getScratchpad function allows the retrieval of values that
        were stored previously in this execution context or in
        other execution contexts. The value of 'scope' controls which
        execution contexts can pass a value to this execution context.
        The options for 'scope' are Global, Policy, and
        PolicyElement.

        'varName' is a string used to identify the value. Subsequent
        retrievals of the same 'varName' in the proper scope will return
        the value stored. Note that the namespace for varName is
        distinct for each scope. As a result, getScratchpad cannot
        force access to a variable in an inaccessible scope - it can
        only retrieve variables by referencing the proper scope in
        which they were set. 'varName' is case sensitive.

        On successful return, 'value' will be set to the value that was
        previously stored, otherwise 'value' will not be modified.






Various Authors      Expires Aug 28, 2002            [Page 59]


Internet Draft    Policy-Based Management MIB November 7, 2001


        This function returns 1 if a value was previously stored and 0
        otherwise.


9.3.10.  signalError()

The signalError() function is used by the script to indicate
to a management station that it is experiencing abnormal
behavior. signalError() turns on the conditionUserSignal(3) or
actionUserSignal(5) bit in the associated pmTrackingPEInfo
object (subsequent calls to signalError() have no additional
effect). This bit is initially cleared at the beginning of
each execution. If upon a subsequent execution, the script
finishes without calling signalError, the bit will be cleared.

    signalError()

        The signalException function takes no arguments and returns no
        value.


9.3.11.  defer()

Precedence groups enforce the rule that for each element, of
the ready policies that match the condition, only the one with
the highest precedence value will be active. Unfortunately,
once the winning policy has been selected and the action
begins running, situations can occur where the policy script
determines that it cannot complete its task. In many such
cases, it is desirable that the next runner-up ready policy be
executed. In the previous example it would be desirable that
at least bronze behavior be configured if gold is appropriate
but gold isn't possible.

When a policy defers it exits and the ready, condition-
matching policy with the next-highest precedence is
immediately run. Because it's possible that might defer as
well, the execution environment must remember where it is in
the precedence chain so that it can continue going down the
chain until an action completes without deferring or no
policies are left in the precedence group. Once a policy
completes successfully, the next iteration will begin at the
top of the precedence chain.

There are two ways to defer. A script can exit by calling





Various Authors      Expires Aug 28, 2002            [Page 60]


Internet Draft    Policy-Based Management MIB November 7, 2001


fail() and specify that it should defer immediately.
Alternately, a script can instruct the execution environment
to automatically defer in the event of a run-time exception.

   defer(integer deferOnRTE)

       The defer function changes the run-time exception behavior of a
       script. By default, a script will not defer when it encounters
       an RTE. If defer(1) is called, the exit behavior is changed so
       the script will defer when it is terminated due to an RTE. If
       defer(0) is called, the script is reset to its default
       behavior and will not defer.

       Note that calling defer doesn't cause the script to exit. Defer
       only changes the default behavior if an RTE occurs later in
       this invocation.


9.3.12.  fail()

   fail(integer defer, integer free [, string message] )

       The fail function causes the script to optionally perform
       certain functions and then exit.

       If 'defer' is 1, this script will defer to the next lower
       precedence ready policy in the same precedence group whose
       condition matches. If 'defer' isn't 1, it will not defer.  Note
       that if a condition defers, it is functionally equivalent to
       the condition returning false.

       If 'free' is 1, certain registered resources will be freed. If
       earlier in this script invocation any rows were created by
       createRow with the 'freeOnException' option, the execution
       environment will set the RowStatus of each row to 'destroy' to
       delete the row. Further, if earlier in this script invocation
       any scratchpad variables were created or modified with the
       'freeOnException' option, they will be deleted.

       If the optional 'message' argument is present, it will be
       logged to the debugging table if pmPolicyDebugging is turned on
       for this policy.

       This function does not return. Instead, the script will
       terminate.





Various Authors      Expires Aug 28, 2002            [Page 61]


Internet Draft    Policy-Based Management MIB November 7, 2001


9.3.13.  getParameters()

From time to time, policy scripts may be parameterized such
that they are supplied one or more parameters (e.g., site-
specific constants). These parameters may be installed in the
pmPolicyParameters object and are accessible to the script via
the getParameters() function. If it is necessary for multiple
parameters to be passed to the script, the script can choose
whatever encoding/delimiting mechanism is most appropriate
such that the multiple parameters can be stored in the
associated instance of pmPolicyParameters.

    string getParameters()

        The getParameters function takes no arguments. It returns a
        string containing the value of the pmPolicyParameters object
        for the running policy.

For example, if a policy is to apply to "slow speed
interfaces" and the cutoff point for slow speed should be
parameterized, the policy filter should be:
    getVar("ifSpeed.$*") == getParameters()

In this example, one can store the string "128000" in the
policy's pmPolicyParameters object to cause this policy to act
on all 128 Kbps interfaces.


9.4.  Utility Library Functions

Utility Library Functions are provided to enable more
efficient policy scripts.


9.4.1.  regexp()

    integer regexp(string pattern, string str,
                   integer case [, string &match])

        regexp searches 'str' for matches to the regular expression
        given in `pattern`. regexp uses the POSIX extended regular
        expressions defined in POSIX 1003.2.

        If `case` is 0, the search will be case insensitive, otherwise
        it will be case sensitive.





Various Authors      Expires Aug 28, 2002            [Page 62]


Internet Draft    Policy-Based Management MIB November 7, 2001


        If a match is found, 1 is returned, otherwise 0 is returned.

        If the optional argument 'match' is provided and a match is
        found, 'match' will be replaced with the text of the first
        substring of 'str' that matches 'pattern'. If no match is
        found it will be unchanged.


9.4.2.  regexpReplace()

    string regexpReplace(string pattern, string replacement,
                          string str, integer case)

        regexpReplace searches 'str' for matches to the regular
        expression given in `pattern`, replacing each occurrence of
        matched text with 'replacement'. regexpReplace uses the POSIX
        extended regular expressions defined in POSIX 1003.2.

        If `case` is 0, the search will be case insensitive, otherwise
        it will be case sensitive.

        The modified string is returned (which would be the same as
        the original string if no matches were found).


9.4.3.  oidlen()

    integer oidlen(string oid)

        oidlen returns the number of subidentifiers in 'oid'. 'oid' is
        a string containing an ASCII dotted-decimal representation of
        an object identifier (e.g. "1.3.6.1.2.1.1.1.0").


9.4.4.  oidncmp()

    integer oidncmp(string oid1, string oid2, integer n)

        Arguments 'oid1' and 'oid2' are strings containing
        ASCII dotted-decimal representations of object identifiers
        (e.g. "1.3.6.1.2.1.1.1.0").

        oidcmp compares not more than 'n' subidentifiers of 'oid1' and
        'oid2' and returns -1 if 'oid1' is less than 'oid2', 0 if they
        are equal, and 1 if 'oid1' is greater than 'oid2'.





Various Authors      Expires Aug 28, 2002            [Page 63]


Internet Draft    Policy-Based Management MIB November 7, 2001


9.4.5.  inSubtree()

    integer inSubtree(string oid, string prefix)

        Arguments 'oid' and 'prefix' are strings containing
        ASCII dotted-decimal representations of object identifiers
        (e.g. "1.3.6.1.2.1.1.1.0").

        inSubtree returns 1 if every subidentifier in 'prefix' equals
        the corresponding subidentifier in 'oid', otherwise it returns
        0. The is equivalent to oidncmp(oid1, prefix, oidlen(prefix))
        is provided because this is an idiom and because it avoids
        evaluating 'prefix' twice if is an expression.


9.4.6.  subid()

    integer subid(string oid, integer n)

        subid returns the value of the 'n'th (starting at zero)
        subidentifier of 'oid'. 'oid' is a string containing an ASCII
        dotted-decimal representation of an object identifier
        (e.g. "1.3.6.1.2.1.1.1.0").

        If 'n' specifies a subidentifier beyond the length of 'oid', a
        value of -1 is returned.


9.4.7.  subidWrite()

    integer subidWrite(string oid, integer n, integer subid)

        subidWrite sets the value of the 'n'th (starting at zero)
        subidentifier of 'oid' to `subid'. 'oid' is a string
        containing an ASCII dotted-decimal representation of an object
        identifier (e.g. "1.3.6.1.2.1.1.1.0").

        If 'n' specifies a subidentifier beyond the length of 'oid',
        a value of -1 is returned. Note that appending subidentifiers
        can be accomplished with the string concatenation '+'
        operator. If no error occurs, zero is returned.









Various Authors      Expires Aug 28, 2002            [Page 64]


Internet Draft    Policy-Based Management MIB November 7, 2001


9.4.8.  oidSplice()

    string oidSplice(string oid1, integer offset, integer len, string oid2)

        oidSplice replaces 'len' subidentifiers in 'oid1' with all of
        the subidentifiers from 'oid2', starting at 'offset' in 'oid1'
        (the first subidentifier is at offset 0). The OID length will
        be extended if necessary if 'offset' + 'len' extends beyond
        the end of 'oid1'. If 'offset' is larger than the length of
        oid1, then a RTE will occur.

        The resulting OID is returned.

        For example:
            oidSplice("1.3.6.1.2.1", 5, 1, "7")     => "1.3.6.1.2.7"
            oidSplice("1.3.6.1.2.1", 4, 2, "7.7")   => "1.3.6.1.7.7"
            oidSplice("1.3.6.1.2.1", 4, 3, "7.7.7") => "1.3.6.1.7.7.7"


9.4.9.  parseIndex()

ParseIndex is provided to make it easy to pull index values
from OIDs into variables.

    var parseIndex(string oid, integer &index, integer type,
                   integer len)

        parseIndex pulls values from the instance identification
        portion of 'oid', encoded as per Section 7.7 "Mapping of the
        INDEX clause" of the SMIv2[5].

        'oid' is the OID to be parsed.

        'index' describes which subid to begin parsing at. 'index'
        will be modified to indicate the subid after the last one
        parsed (even if this points past the last subid). The first
        subid is index 0. If any error occurs, 'index' will set to -1
        on return. If the input index is less than 0 or refers past
        the end of the OID, 'index' will be set to -1 on return and
        the function will return 0.

        If 'type' is Integer, 'len' will not be consulted. The return
        value is the integer value of the next subid.

        If 'type' is String and 'len' is greater than zero, 'len'





Various Authors      Expires Aug 28, 2002            [Page 65]


Internet Draft    Policy-Based Management MIB November 7, 2001


        subids will be parsed. For each subid parsed, the chr() value
        of the subid will be appended to the returned string. If any
        subid is greater than 255, 'index' will be set to -1 on return
        and an empty string will be returned. If there are fewer than
        'len' subids left in 'oid', 'index' will be set to -1 on
        return but a string will be returned containing a character
        for each subid that was left.

        If 'type' is String and 'len' is zero, the next subid will be
        parsed to find 'N', the length of the string. Then this many
        subids will be parsed. For each subid parsed, the chr() value
        of the subid will be appended to the returned string. If any
        subid is greater than 255, 'index' will be set to -1 on return
        and an empty string will be returned. If there are fewer than
        'N' subids left in 'oid', 'index' will be set to -1 on return
        but a string will be returned containing a character for each
        subid that was left.

        If 'type' is String and 'len' is -1, subids will be parsed
        until the end of 'oid'. For each subid parsed, the chr() value
        of the subid will be appended to the returned string. If any
        subid is greater than 255, 'index' will be set to -1 on return
        and an empty string will be returned.

        If 'type' is Oid and 'len' is greater than zero, 'len' subids
        will be parsed. For each subid parsed, the decimal-encoded
        value of the subid will be appended to the returned string,
        with a '.' character appended between each output subid but
        not after the last subid. If there are fewer than 'len' subids
        left in 'oid', 'index' will be set to -1 on return but a
        string will be returned containing an encoding for each subid
        that was left.

        If 'type' is Oid and 'len' is zero, the next subid will be
        parsed to find 'N', the number of subids to parse. For each
        subid parsed, the decimal-encoded value of the subid will be
        appended to the returned string, with a '.' character appended
        between each output subid but not after the last subid. If
        there are fewer than 'N' subids left in 'oid', 'index' will be
        set to -1 on return but a string will be returned containing
        an encoding for each subid that was left.

        If 'type' is Oid and 'len' is -1, subids will be parsed until
        the end of 'oid'. For each subid parsed, the decimal-encoded
        value of the subid will be appended to the returned string,





Various Authors      Expires Aug 28, 2002            [Page 66]


Internet Draft    Policy-Based Management MIB November 7, 2001


        with a '.' character appended between each output subid but
        not after the last subid.

For example, to decode the index component of an instance of
the ipForward table:
    oid = "ipForwardIfIndex.0.0.0.0.13.0.192.168.1.1";
    index = 11;
    dest   =  parseIndex(oid, index, String, 4);
    proto  =  parseIndex(oid, index, Integer, 0);
    policy =  parseIndex(oid, index, Integer, 0);
    nextHop = parseIndex(oid, index, String, 4);
    // proto and policy now contain integer values
    // dest and nextHop now contain 4 byte IP addresses. Use
    // stringToDotted to get them to dotted decimal notation:
    // e.g.: stringToDotted(nextHop) => "192.168.1.1"


9.4.10.  stringToDotted()

stringToDotted() is provided to encode strings suitable for
the index portion of an OID or to convert the binary encoding
of an ip address to a dotted-decimal encoding.

    string stringToDotted(string value)

        If 'value' is the zero length string, the zero length string
        is returned.

        The decimal encoding of the first byte of 'value' is appended
        to the output string. Then for each additional byte in
        'value', a '.' is appended to the output string followed by
        the decimal encoding of the additional byte.



9.4.11.  integer()

    integer integer(var input)

        integer converts 'input' into an integer by using the rules
        specified for ToInteger(), returning the integer-typed
        results.








Various Authors      Expires Aug 28, 2002            [Page 67]


Internet Draft    Policy-Based Management MIB November 7, 2001


9.4.12.  string()

    string string(var input)

        string converts 'input' into a string by using the rules
        specified for ToString(), returning the string-typed
        results.


9.4.13.  type()

    string type(var variable)

        type returns the type of its argument as either the string
        'String' or the string 'Integer'.


9.4.14.  chr()

    string chr(integer utf8)

        Returns a one-character string containing the character
        specified by the UTF8 code contained in 'utf8'. Note that a
        property of UTF8 is that 7-bit ASCII characters are
        represented by the same UTF8 code-points as their ASCII
        equivalents.


9.4.15.  ord()

    integer ord(string str)

        Returns the UTF8 code-point value of the first character of
        'str'. This function complements chr(). Note that a property of
        UTF8 is that 7-bit ASCII characters are represented by the
        same UTF8 code-points as their ASCII equivalents.


9.4.16.  substr()

    string substr(string &str, integer offset
                  [, integer len, string replacement])

        Extracts a substring out of 'str' and returns it. The first
        octet is at offset 0. If offset is negative, the returned





Various Authors      Expires Aug 28, 2002            [Page 68]


Internet Draft    Policy-Based Management MIB November 7, 2001


        string starts that far from the end of 'str'. If 'len' is
        positive, the returned string contains up to 'len' octets,
        up to the end of the string. If 'len' is omitted, the returned
        string includes everything to the end of 'str'. If 'len' is
        negative, abs(len) octets are left off the end of the
        string.

        If you specify a substring that is partly outside the string,
        the part within the string is returned. If the substring is
        totally outside the string, a zero-length string is produced.

        If the optional 'replacement' argument is included, 'str' is
        modified. 'offset' and 'len' act as above to select a range of
        octets in 'str'. These octets are replaced with
        octets from 'replacement'. If the replacement string is
        shorter or longer than the number of octets selected,
        'str' will shrink or grow respectively. If 'replacement' is
        included, the 'len' argument must also be included.

        Note that to replace everything from offset to the end of the
        string, substr() should be called like:
            substr(str, offset, strlen(str) - offset, replacement)


9.5.  General Functions

The following POSIX standard library functions are provided:

  strncmp()
  strncasecmp()
  strlen()
  random()
  sprintf()
  sscanf()



10.  Schedule Table

This table is an adapted form of the policyTimePeriodCondition
class defined in the Policy Core Information Model, RFC 3090
[21].

The policy schedule table allows control over when a valid
policy will be ready, based on the date and time.





Various Authors      Expires Aug 28, 2002            [Page 69]


Internet Draft    Policy-Based Management MIB November 7, 2001


A policy's pmPolicySchedule variable refers to a group of one
or more schedules in the schedule table. At any given point in
time, if any of these schedules are active, the policy will be
ready (assuming that it is enabled and thus valid) and its
conditions and actions will be executed as appropriate.  At
times when none of these schedules are active, the policy will
not be ready and will have no effect. A policy will always be
ready if its pmPolicySchedule variable is 0. If a policy has a
non-zero pmPolicySchedule that doesn't refer to a group that
includes an active schedule, then the policy will not be
ready, even if this is due to a misconfiguration of the
pmPolicySchedule object or the pmSchedTable.

A policy that is controlled by a schedule group immediately
executes its policy condition (and conditionally the
policyAction) when the schedule group becomes active,
periodically re-executing these scripts as appropriate until
the schedule group becomes inactive (i.e. all schedules are
inactive).

An individual schedule item is active at those times that
match all of the variables that define the schedule:
pmSchedTimePeriod, pmSchedMonth, pmSchedDay, pmSchedWeekDay,
and pmSchedTimeOfDay.  It is possible to specify multiple
values for each schedule item.  This provides a mechanism for
defining complex schedules.  For example, a schedule could be
defined which is active the entire workday each weekday.

Months, days and weekdays are specified using the objects
pmSchedMonth, pmSchedDay and pmSchedWeekDay of type BITS.
Setting multiple bits in these objects causes an OR operation.
For example, setting the bits monday(1) and friday(5) in
pmSchedWeekDay restricts the schedule to Mondays and Fridays.

The matched times for pmSchedTimePeriod, pmSchedMonth,
pmSchedDay pmSchedWeekDay, and pmSchedTimeOfDay are ANDed
together to determine the time periods that the schedule will
be active; in other words, the schedule is only active for
those times that ALL of these schedule attributes match. For
example, a schedule with an overall validity range of January
1, 2000 through December 31, 2000; a month mask that selects
March and April; a day-of-the-week mask that selects Fridays;
and a time of day range of 0800 through 1600 would represent
the following time periods:






Various Authors      Expires Aug 28, 2002            [Page 70]


Internet Draft    Policy-Based Management MIB November 7, 2001


      Friday, March  5, 2000, from 0800 through 1600;
      Friday, March 12, 2000, from 0800 through 1600;
      Friday, March 19, 2000, from 0800 through 1600;
      Friday, March 26, 2000, from 0800 through 1600;
      Friday, April  2, 2000, from 0800 through 1600;
      Friday, April  9, 2000, from 0800 through 1600;
      Friday, April 16, 2000, from 0800 through 1600;
      Friday, April 23, 2000, from 0800 through 1600;
      Friday, April 30, 2000, from 0800 through 1600.

Wildcarding of schedule attributes of type BITS is achieved by
setting all bits to one.

It is possible to define schedules that will never cause a
policy to be activated. For example, one can define a schedule
which should be active on February 31st.


































Various Authors      Expires Aug 28, 2002            [Page 71]


Internet Draft    Policy-Based Management MIB November 7, 2001


11.  Definitions

POLICY-BASED-MANAGEMENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Counter32, Gauge32, Unsigned32,
    experimental                                 FROM SNMPv2-SMI
    RowStatus, RowPointer, TEXTUAL-CONVENTION,
    DateAndTime, StorageType                     FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP,
    NOTIFICATION-GROUP                           FROM SNMPv2-CONF
    SnmpAdminString                              FROM SNMP-FRAMEWORK-MIB;

--  Policy-Based Management MIB

pmMib MODULE-IDENTITY
    LAST-UPDATED "200111070000Z"  -- November 7, 2001
    ORGANIZATION "IETF SNMP Configuration Working Group"
    CONTACT-INFO
        "


        Steve Waldbusser

        Phone: +1-650-948-6500
        Fax:   +1-650-745-0671
        Email: waldbusser@nextbeacon.com

        Jon Saperia (WG Co-chair)
        JDS Consulting, Inc.
        174 Chapman St.
        Watertown MA 02472-3063
        USA
        Phone: +1-617-744-1079
        Fax:   +1-617-249-0874
        Email: saperia@jdscons.com

        Thippanna Hongal
        Riverstone Networks, Inc.
        5200 Great America Parkway
        Santa Clara, CA, 95054
        USA

        Phone: +1-408-878-6562
        Fax:   +1-408-878-6501





Various Authors      Expires Aug 28, 2002            [Page 72]


Internet Draft    Policy-Based Management MIB November 7, 2001


        Email: hongal@riverstonenet.com


        David Partain (WG Co-chair)
        Postal: Ericsson Radio Systems
                P.O. Box 1248
                SE-581 12 Linkoping
                Sweden
        Tel: +46 13 28 41 44
        E-mail: David.Partain@ericsson.com

        Any questions or comments about this document can also be
        directed to the working group at snmpconf@snmp.com."
    DESCRIPTION
        "The MIB module for policy-based configuration of SNMP
        infrastructures."

    REVISION "200111070000Z"    -- November 7, 2001
    DESCRIPTION
        "The original version of this MIB, published as RFCXXXX."
    ::= { experimental 107 }

UTF8String ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "An octet string containing information typically in
        human-readable form.

        To facilitate internationalization, this
        information is represented using the ISO/IEC
        IS 10646-1 character set, encoded as an octet
        string using the UTF-8 transformation format
        described in [RFC2279].

        Since additional code points are added by
        amendments to the 10646 standard from time
        to time, implementations must be prepared to
        encounter any code point from 0x00000000 to
        0x7fffffff.  Byte sequences that do not
        correspond to the valid UTF-8 encoding of a
        code point or are outside this range are
        prohibited.

        The use of control codes should be avoided.






Various Authors      Expires Aug 28, 2002            [Page 73]


Internet Draft    Policy-Based Management MIB November 7, 2001


        When it is necessary to represent a newline,
        the control code sequence CR LF should be used.

        For code points not directly supported by user
        interface hardware or software, an alternative
        means of entry and display, such as hexadecimal,
        may be provided.

        For information encoded in 7-bit US-ASCII,
        the UTF-8 encoding is identical to the
        US-ASCII encoding.

        UTF-8 may require multiple bytes to represent a
        single character / code point; thus the length
        of this object in octets may be different from
        the number of characters encoded.  Similarly,
        size constraints refer to the number of encoded
        octets, not the number of characters represented
        by an encoding.

        Note that when this TC is used for an object that
        is used or envisioned to be used as an index, then
        a SIZE restriction MUST be specified so that the
        number of sub-identifiers for any object instance
        does not exceed the limit of 128, as defined by
        [RFC1905].

        Note that the size of an UTF8String object is
        measured in octets, not characters."
       SYNTAX       OCTET STRING

-- The policy table

pmPolicyTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmPolicyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The policy table. A policy is a pairing of a
        policyCondition and a policyAction which is used to apply the
        action to a selected set of elements."
    ::= { pmMib 1 }

pmPolicyEntry OBJECT-TYPE
    SYNTAX      PmPolicyEntry





Various Authors      Expires Aug 28, 2002            [Page 74]


Internet Draft    Policy-Based Management MIB November 7, 2001


    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the policy table representing one policy."
    INDEX { pmPolicyAdminGroup, pmPolicyIndex }
    ::= { pmPolicyTable 1 }

PmPolicyEntry ::= SEQUENCE {
    pmPolicyAdminGroup            UTF8String,
    pmPolicyIndex                 Unsigned32,
    pmPolicyPrecedenceGroup       UTF8String,
    pmPolicyPrecedence            Unsigned32,
    pmPolicySchedule              Unsigned32,
    pmPolicyElementTypeFilter     UTF8String,
    pmPolicyConditionScriptIndex  Unsigned32,
    pmPolicyActionScriptIndex     Unsigned32,
    pmPolicyParameters            OCTET STRING,
    pmPolicyConditionMaxLatency   Unsigned32,
    pmPolicyActionMaxLatency      Unsigned32,
    pmPolicyMaxIterations         Unsigned32,
    pmPolicyDescription           UTF8String,
    pmPolicyMatches               Gauge32,
    pmPolicyAbnormalTerminations  Gauge32,
    pmPolicyExecutionErrors       Counter32,
    pmPolicyDebugging             INTEGER,
    pmPolicyAdminStatus           INTEGER,
    pmPolicyStorageType           StorageType,
    pmPolicyRowStatus             RowStatus
}

pmPolicyAdminGroup OBJECT-TYPE
    SYNTAX      UTF8String (SIZE(0..8))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An administratively assigned string that can be used to group
        policies for convenience, readability or to simplify
        configuration of access control.

        The value of this string does not affect policy processing in
        any way. If grouping is not desired or necessary, this object
        may be set to a zero-length string."
    ::= { pmPolicyEntry 1 }

pmPolicyIndex OBJECT-TYPE





Various Authors      Expires Aug 28, 2002            [Page 75]


Internet Draft    Policy-Based Management MIB November 7, 2001


    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An index for this policy entry, unique amongst policies in
         the same administrative group."
    ::= { pmPolicyEntry 2 }

pmPolicyPrecedenceGroup OBJECT-TYPE
    SYNTAX      UTF8String (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "An administratively assigned string that is used to group
        policies. For each element, only one policy in the same
        precedence group may be active on that element. If multiple
        policies would be active on an element (because their
        conditions return non-zero), the execution environment will
        only allow the policy with the highest value of
        pmPolicyPrecedence to be active."
    ::= { pmPolicyEntry 3 }

pmPolicyPrecedence OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "If while checking to see which policy conditions match an
        element, 2 or more ready policies in the same precedence group
        match the same element, the pmPolicyPrecedence object provides
        the rule to arbitrate which single policy will be active on
        this element. Of policies in the same precedence group, only
        the ready and matching policy with the highest precedence
        value (i.e. 2 is higher than 1) will have its policy action
        periodically executed on this element.

        When a policy is active on an element but the condition ceases
        to match the element, its action (if currently running) will
        be allowed to complete and then the condition-matching ready
        policy with the next-highest precedence will immediately
        become active (and has its action run immediately). If the
        condition of a higher-precedence ready policy suddenly begins
        matching an element, the previously-active policy's action (if
        currently running) will be allowed to complete and then the
        higher precedence policy will immediately become active, its





Various Authors      Expires Aug 28, 2002            [Page 76]


Internet Draft    Policy-Based Management MIB November 7, 2001


        action will run immediately and any lower-precedence matching
        policy will not be active anymore.

        In the case where multiple ready policies share the highest
        value, it is an implementation-dependent matter as to which
        single policy action will be chosen.

        Note that if it is necessary to take certain actions after a
        policy is no longer active on an element, these actions should
        be included in a lower-precedence policy that is in the same
        precedence group."
    ::= { pmPolicyEntry 4 }

pmPolicySchedule OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "This policy will be ready if any of the associated schedule
         entries are active.

         If the value of this object is 0, this policy is always
         ready.

         If the value of this object is non-zero but it doesn't
         refer to a schedule group that includes an active schedule,
         then the policy will not be ready, even if this is due to a
         misconfiguration of this object or the pmSchedTable."
    ::= { pmPolicyEntry 5 }

pmPolicyElementTypeFilter OBJECT-TYPE
    SYNTAX      UTF8String (SIZE (0..128))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the element types for which this policy
        can be executed.

        The format of this object will be a sequence of
        pmElementTypeRegOIDPrefix values, encoded in the following
        BNF form:

        elementTypeFilter:   oid [ ';' oid ]*
                      oid:   subid [ '.' subid ]*
                    subid:   '0' | decimal_constant





Various Authors      Expires Aug 28, 2002            [Page 77]


Internet Draft    Policy-Based Management MIB November 7, 2001


        For example, to register for the policy to be run on all
        interface elements, the 'ifEntry' element type will be
        registered as '1.3.6.1.2.1.2.2.1'.

        If a value is registered that does not represent a registered
        pmElementTypeRegOIDPrefix, then that value will be ignored."
    ::= { pmPolicyEntry 6 }


pmPolicyConditionScriptIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "A pointer to the row or rows in the pmPolicyCodeTable that
         contain the condition code for this policy. When a policy entry
         is created, a pmPolicyCodeIndex value unused by this
         policy's adminGroup will be assigned to this object.

         A policy condition is one or more PolicyScript statements
         which results in a boolean value that represents whether or
         not an element is a member of a set of elements upon which an
         action is to be performed. If a policy is ready and the
         condition returns true for an element of a proper element
         type, and no higher-precedence policy should be active, then
         the policy is active on that element.

         Condition evaluation stops immediately when any run-time
         exception is detected and the policyAction is not executed.

         The policyCondition is evaluated for various elements. Any
         element for which the policyCondition returns any nonzero value
         will match the condition and will have the associated
         policyAction executed on that element unless a
         higher-precedence policy in the same precedence group also
         matches this element.

         If the condition object is empty (contains no code) or otherwise
         does not return a value, the element will not be matched.

         When executing this condition, if SNMP requests are made to
         the local system, access to objects is under the security
         credentials of the requester who most recently modified the
         associated pmPolicyAdminStatus object.






Various Authors      Expires Aug 28, 2002            [Page 78]


Internet Draft    Policy-Based Management MIB November 7, 2001


         These credentials are the input parameters for
         isAccessAllowed from the Architecture for Describing SNMP
         Management Frameworks[1]."
    ::= { pmPolicyEntry 7 }

pmPolicyActionScriptIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "A pointer to the row or rows in the pmPolicyCodeTable that
         contain the action code for this policy. When a policy entry
         is created, a pmPolicyCodeIndex value unused by this policy's
         adminGroup will be assigned to this object.

         A PolicyAction is an operation performed on a
         set of elements for which the policy is active.

         Action evaluation stops immediately when any run-time
         exception is detected.

         When executing this condition, if SNMP requests are made to
         the local system, access to objects is under the security
         credentials of the requester who most recently modified the
         associated pmPolicyAdminStatus object.

         These credentials are the input parameters for
         isAccessAllowed from the Architecture for Describing SNMP
         Management Frameworks[1]."
    ::= { pmPolicyEntry 8 }

pmPolicyParameters OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "From time to time, policy scripts may desire one or more
        parameters (e.g., site-specific constants). These parameters
        may be installed with the script in this object and are
        accessible to the script via the getParameters() function. If
        it is necessary for multiple parameters to be passed to the
        script, the script can choose whatever encoding/delimiting
        mechanism is most appropriate."
    ::= { pmPolicyEntry 9 }






Various Authors      Expires Aug 28, 2002            [Page 79]


Internet Draft    Policy-Based Management MIB November 7, 2001


pmPolicyConditionMaxLatency OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Every element under the control of this agent is
        re-checked periodically to see if it is under control of this
        policy by re-running the condition for this policy.
        This object lets the manager control the maximum amount of
        time that may pass before an element is re-checked.

        In other words, in any given interval of this duration, all
        elements must be re-checked. Note that it is an
        implementation-dependent matter as to how the policy agent
        schedules the checking of various elements within this
        interval. Implementations may wish to re-run a condition more
        quickly if they note a change to the role strings for an
        element."
    ::= { pmPolicyEntry 10 }

pmPolicyActionMaxLatency OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Every element that matches this policy's condition and is
        therefore under control of this policy will have this policy's
        action executed periodically to ensure that the element
        remains in the state dictated by the policy.
        This object lets the manager control the maximum amount of
        time that may pass before an element has the action run on
        it.

        In other words, in any given interval of this duration, all
        elements under control of this policy must have the action run
        on them. Note that it is an implementation-dependent matter as
        to how the policy agent schedules the policy action on various
        elements within this interval."
    ::= { pmPolicyEntry 11 }

pmPolicyMaxIterations OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create





Various Authors      Expires Aug 28, 2002            [Page 80]


Internet Draft    Policy-Based Management MIB November 7, 2001


    STATUS      current
    DESCRIPTION
        "If a condition or action script iterates in loops too many
        times in one invocation, it may be considered by the execution
        environment to be in an infinite loop or otherwise not acting
        as intended and may be terminated by the execution
        environment. The execution environment will count the
        cumulative number of times all 'for' or 'while' loops iterated
        and will apply a threshold to determine when to terminate the
        script. It is an implementation-dependent manner as to what
        threshold the execution environment uses, but the value of
        this object SHOULD be the basis for choosing the threshold for
        each script. The value of this object represents a
        policy-specific threshold and can be tuned for policies of
        varying workloads. If this value is zero, no
        threshold will be enforced except for any
        implementation-dependent maximum. Regardless of this value,
        the agent is allowed to terminate any script invocation that
        exceeds a local CPU or memory limitation.

        Note that the condition and action invocations are tracked
        separately."
    ::= { pmPolicyEntry 12 }

pmPolicyDescription OBJECT-TYPE
    SYNTAX      UTF8String
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "A description of this rule and its significance, typically
         provided by a human."
    ::= { pmPolicyEntry 13 }

pmPolicyMatches OBJECT-TYPE
    SYNTAX      Gauge32
    UNITS       "elements"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The number of elements that, in their most recent execution
         of the associated condition, were matched by the condition."
    ::= { pmPolicyEntry 14 }

pmPolicyAbnormalTerminations OBJECT-TYPE
    SYNTAX      Gauge32





Various Authors      Expires Aug 28, 2002            [Page 81]


Internet Draft    Policy-Based Management MIB November 7, 2001


    UNITS       "elements"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The number of elements that, in their most recent execution
         of the associated condition or action, have experienced a
         run-time exception and terminated abnormally. Note that if a
         policy was experiencing a run-time exception while processing
         a particular element but on a subsequent invocation it runs
         normally, this number can decline."
    ::= { pmPolicyEntry 15 }

pmPolicyExecutionErrors OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "errors"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The total number of times that execution of this policy's
         condition or action has been terminated due to run-time
         exceptions."
    ::= { pmPolicyEntry 16 }

pmPolicyDebugging OBJECT-TYPE
    SYNTAX      INTEGER {
                    off(0),
                    on(1)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The status of debugging for this policy. If this is turned
         on(1), log entries will be created in the pmDebuggingTable
         for each run-time exception that is experienced by this
         policy."
    DEFVAL { off }
    ::= { pmPolicyEntry 17 }

pmPolicyAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    disabled(0),
                    enabled(1),
                    enabledAutoRemove(2)
                }
    MAX-ACCESS  read-create





Various Authors      Expires Aug 28, 2002            [Page 82]


Internet Draft    Policy-Based Management MIB November 7, 2001


    STATUS      current
    DESCRIPTION
         "The administrative status of this policy.

         The policy will be valid only if the associated
         pmPolicyRowStatus is set to active(1) and this object is set
         to enabled(1) or enabledAutoRemove(2).

         If this object is set to enabledAutoRemove(2), the next time
         the associated schedule moves from the active state to the
         inactive state, this policy will immediately be deleted,
         including any associated entries in the pmPolicyCodeTable.

         The following related objects may not be changed unless this
         object is set to disabled(0):
             pmPolicyPrecedenceGroup, pmPolicyPrecedence,
             pmPolicySchedule, pmPolicyElementTypeFilter,
             pmPolicyConditionScriptIndex, pmPolicyActionScriptIndex,
             pmPolicyParameters, and any pmPolicyCodeTable row
             referenced by this policy.
         In order to change any of these parameters, the policy must
         be moved to the disabled(0) state, changed, and then
         re-enabled.

         When this policy moves to either enabled state from the
         disabled state, any cached values of policy condition must be
         erased and any Policy or PolicyElement scratchpad values for
         this policy should be removed. Policy execution will begin by
         testing the policy condition on all appropriate elements.

         [Note to reader: This object exists because a row cannot sit
         for extended periods of time with its rowstatus set to
         inactive (it is subject to garbage collection). This object
         allows policies to be downloaded but not run except at the
         convenience of the management station.]"
    ::= { pmPolicyEntry 18 }

pmPolicyStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object defines whether this policy and any associated
         entries in the pmPolicyCodeTable are kept in volatile storage
         and lost upon reboot or if this row is backed up by





Various Authors      Expires Aug 28, 2002            [Page 83]


Internet Draft    Policy-Based Management MIB November 7, 2001


         non-volatile or permanent storage."
    ::= { pmPolicyEntry 19 }

pmPolicyRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The row status of this pmPolicyEntry.

         The status may not be set to active if any of the related
         entries in the pmPolicyCode table do not have a status of
         active or if any of the objects in this row are not set to
         valid values.

         If this row is deleted, any associated entries in the
         pmPolicyCodeTable will be deleted as well."
    ::= { pmPolicyEntry 20 }


-- Policy Code Table

-- An example of the relationships between the code table and the
-- policy table:
--
-- pmPolicyTable
--     AdminGroup  Index   ConditionScriptIndex  ActionScriptIndex
-- A   ""          1       1                     2
-- B   "oper"      1       1                     2
-- C   "oper"      2       3                     4
--
-- pmPolicyCodeTable
-- AdminGroup  ScriptIndex  Segment    Note
-- ""          1            1          Filter for policy A
-- ""          2            1          Action for policy A
-- "oper"      1            1          Filter for policy B
-- "oper"      2            1          Action 1/2 for policy B
-- "oper"      2            2          Action 2/2 for policy B
-- "oper"      3            1          Filter for policy C
-- "oper"      4            1          Action for policy C
--

-- In this example there are 3 policies, 1 in the "" adminGroup and 2
-- in the "oper" adminGroup. Policy A has been assigned script index 1
-- and 2 (these script indexes are assigned out of a separate pool per





Various Authors      Expires Aug 28, 2002            [Page 84]


Internet Draft    Policy-Based Management MIB November 7, 2001


-- adminGroup) with 1 code segment each for the filter and the
-- action. Policy B has been assigned script index 1 and 2 (out of the
-- pool for the "oper" adminGroup). While the filter has 1 segment,
-- the action is longer and is loaded into 2 segments. Finally,
-- Policy C has been assigned script index 3 and 4 with 1 code segment
-- each for the filter and the action.

pmPolicyCodeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmPolicyCodeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The pmPolicyCodeTable stores the code for policy conditions and
        actions."
    ::= { pmMib 2 }

pmPolicyCodeEntry OBJECT-TYPE
    SYNTAX      PmPolicyCodeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the policy code table representing one code
        segment. Entries that share a common AdminGroup/ScriptIndex
        pair make up a single script. Valid values of ScriptIndex are
        retrieved from pmPolicyConditionScriptIndex and
        pmPolicyActionScriptIndex after a pmPolicyEntry is
        created. Segments of code can then be written to this table
        using the learned ScriptIndex values.

        The pmPolicyAdminGroup element of the index represents the
        administrative group of the policy this code entry is a part."
    INDEX { pmPolicyAdminGroup, pmPolicyCodeScriptIndex,
            pmPolicyCodeSegment }
    ::= { pmPolicyCodeTable 1 }

PmPolicyCodeEntry ::= SEQUENCE {
    pmPolicyCodeScriptIndex    Unsigned32,
    pmPolicyCodeSegment        Unsigned32,
    pmPolicyCodeText           UTF8String,
    pmPolicyCodeStatus         RowStatus
}

pmPolicyCodeScriptIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible





Various Authors      Expires Aug 28, 2002            [Page 85]


Internet Draft    Policy-Based Management MIB November 7, 2001


    STATUS      current
    DESCRIPTION
         "A unique index for each policy condition or action. The code
         for each such condition or action may be composed of multiple
         entries in this table if the code cannot fit in one entry.
         Values of pmPolicyCodeScriptIndex may not be used unless
         they have previously been assigned in the
         pmPolicyConditionScriptIndex or pmPolicyActionScriptIndex
         objects."
    ::= { pmPolicyCodeEntry 1 }

pmPolicyCodeSegment OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "A unique index for each segment of a policy condition or
         action.

         When a policy condition or action spans multiple entries in
         this table, the code of that policy starts from the
         lowest-numbered segment and continues with increasing segment
         values until ending with the highest-numbered segment."
    ::= { pmPolicyCodeEntry 2 }

pmPolicyCodeText OBJECT-TYPE
    SYNTAX      UTF8String (SIZE (1..1024))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "A segment of policy code (condition or action). Lengthy Policy
         conditions or actions may be stored in multiple segments in this
         table that share the same value of pmPolicyCodeScriptIndex.
         When multiple segments are used, it is recommended that each
         segment be as large as practical.

         Entries in this table are associated with policies by values
         of the pmPolicyConditionScriptIndex and
         pmPolicyActionScriptIndex objects. If the status of the
         related policy is active, then this object may not be
         modified."
    ::= { pmPolicyCodeEntry 3 }

pmPolicyCodeStatus OBJECT-TYPE
    SYNTAX      RowStatus





Various Authors      Expires Aug 28, 2002            [Page 86]


Internet Draft    Policy-Based Management MIB November 7, 2001


    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The status of this code entry.

         Entries in this table are associated with policies by values
         of the pmPolicyConditionScriptIndex and
         pmPolicyActionScriptIndex objects. If the status of the
         related policy is active, then this object can not be
         modified (I.E., deleted or set to notInService) nor may new
         entries be created."
    ::= { pmPolicyCodeEntry 4 }

-- Element Type Registration Table

-- The Element Type Registration table allows the manager to learn
-- what element types are being managed by the system and to register
-- new types if necessary. An element type is registered by providing
-- the OID of an SNMP object (i.e., without the instance). Each SNMP
-- instance that exists under that object is a distinct
-- element. The index of the element is the index part of the
-- discovered OID. This index will be supplied to policy conditions
-- and actions so that this code can inspect and configure the
-- element.
--
-- For example, this table might contain the following entries, the
-- first three are agent-installed, while the 4th was downloaded by a
-- management station:
--
--  OIDPrefix        MaxLatency  Description               StorageType
--  ifEntry          100 mS      interfaces - builtin      readOnly
--  0.0              100 mS      system element - builtin  readOnly
--  frCircuitEntry   100 mS      FR Circuits - builtin     readOnly
--  hrSWRunEntry     60 sec      Running Processes         volatile

pmElementTypeRegTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmElementTypeRegEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A registration table for element types managed by this
        system.

        Note that agents may automatically configure elements in this
        table for frequently used element types (interfaces, circuits,





Various Authors      Expires Aug 28, 2002            [Page 87]


Internet Draft    Policy-Based Management MIB November 7, 2001


        etc.). In particular, it may configure elements for whom
        discovery is optimized in one or both of the following ways:

        1. The agent may discover elements by scanning internal data
           structures as opposed to issuing local SNMP requests. It is
           possible to recreate the exact semantics described in this
           table even if local SNMP requests are not issued.

        2. The agent may receive asynchronous notification of new
           elements (for example, 'card inserted') and use that
           information to instantly create elements rather than
           through polling. A similar feature might be available for
           the deletion of elements.

        Note that the disposition of agent-installed entries is
        described by the pmPolicyStorageType object."
    ::= { pmMib 3 }

pmElementTypeRegEntry OBJECT-TYPE
    SYNTAX      PmElementTypeRegEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A registration of an element type."
    INDEX       { pmElementTypeRegOIDPrefix }
    ::= { pmElementTypeRegTable 1 }

PmElementTypeRegEntry ::= SEQUENCE {
    pmElementTypeRegOIDPrefix     OBJECT IDENTIFIER,
    pmElementTypeRegMaxLatency    Unsigned32,
    pmElementTypeRegDescription   UTF8String,
    pmElementTypeRegStorageType   StorageType,
    pmElementTypeRegRowStatus     RowStatus
}

pmElementTypeRegOIDPrefix OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This OBJECT IDENTIFIER value identifies a table in which all
        elements of this type will be found. Every row in the
        referenced table will be treated as an element for the
        period of time that it remains in the table. The agent will
        then execute policy conditions and actions as appropriate on each





Various Authors      Expires Aug 28, 2002            [Page 88]


Internet Draft    Policy-Based Management MIB November 7, 2001


        of these elements.

        This object identifier value is specified down to the 'entry'
        component (i.e. ifEntry) of the identifier.

        The index of each discovered row will be passed to each
        invocation of the policy condition and policy action.

        The actual mechanism by which instances are discovered is
        implementation-dependent. Periodic walks of the table to
        discover the rows in the table is one such mechanism. This
        mechanism has the advantage that it can be performed by an
        agent with no knowledge of the names, syntax or semantics
        of the MIB objects in the table. This mechanism also serves as
        the reference design. Other implementation-dependent
        mechanisms may be implemented that are more efficient (perhaps
        because they are hard-coded) or that don't require polling.
        These mechanisms must discover the same elements as the
        table-walking reference design.

        A special OBJECT IDENTIFIER '0.0' can be written to this
        object. '0.0' represents the single instance of the system
        itself and provides an execution context for policies to
        operate on the 'system element' as well as on MIB objects
        modeled as scalars. For example, '0.0' gives an execution
        context for policy-based selection of the operating system
        code version (likely modeled as a scalar MIB object). The
        element type '0.0' always exists - as a consequence, no actual
        discovery will take place and the pmElementTypeRegMaxLatency
        object will have no effect for the '0.0' element
        type. However, if the '0.0' element type is not registered in
        the table, policies will not be executed on the '0.0' element.

        When a policy is invoked on behalf of a '0.0' entry in this
        table, the element name will be '0.0' and there is no index
        of 'this element' (in other words it has zero length)."
    ::= { pmElementTypeRegEntry 2 }

pmElementTypeRegMaxLatency OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The PM agent is responsible for discovering new elements of





Various Authors      Expires Aug 28, 2002            [Page 89]


Internet Draft    Policy-Based Management MIB November 7, 2001


        types that are registered. This object lets the manager
        control the maximum amount of time that may pass between the
        time an element is created and when it is discovered.

        In other words, in any given interval of this duration, all
        new elements must be discovered. Note that it is an
        implementation-dependent matter as to how the policy agent
        schedules the checking of various elements within this
        interval."
    ::= { pmElementTypeRegEntry 3 }

pmElementTypeRegDescription OBJECT-TYPE
    SYNTAX      UTF8String (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "A descriptive label for this registered type."
    ::= { pmElementTypeRegEntry 4 }

pmElementTypeRegStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object defines whether this row is kept
         in volatile storage and lost upon reboot or if this row is
         backed up by non-volatile or permanent storage."
    ::= { pmElementTypeRegEntry 5 }

pmElementTypeRegRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this registration entry."
    ::= { pmElementTypeRegEntry 6 }

-- Role Table

-- The pmRoleTable is a read-create table that organizes role
-- strings sorted by element. This table is used to create and modify
-- role strings and their associations as well as to allow a
-- management station to learn about the existence of roles and their
-- associations.
--





Various Authors      Expires Aug 28, 2002            [Page 90]


Internet Draft    Policy-Based Management MIB November 7, 2001


-- It is the responsibility of the agent to keep track of any
-- re-indexing of the underlying SNMP elements and to continue to
-- associate role strings with the element with which they were
-- initially configured.
--
-- Policy MIB agents that have elements in multiple local SNMP
-- contexts need to allow some roles to be assigned to elements in
-- particular contexts. This is particularly true when some elements
-- have the same names in different contexts and the context is
-- required to disambiguate them. In those situations, a value for the
-- pmRoleContextName may be provided. When a pmRoleContextName value
-- is not provided, the assignment is to the element in the default
-- context.
--
-- Policy MIB agents that discover elements on other systems and
-- execute policies on their behalf need to have access to role
-- information for these remote elements. In such situations, role
-- assignments for other systems can be stored in this table by
-- providing values for the pmRoleContextEngineID parameters.
--
-- For example:
-- Example:
-- element       role    context ctxEngineID   #comment
-- ifindex.1     gold                          local, default context
-- ifindex.2     gold                          local, default context
-- repeaterid.1  foo     rptr1                 local, rptr1 context
-- repeaterid.1  bar     rptr2                 local, rptr2 context
-- ifindex.1     gold    ""      A             different system
-- ifindex.1     gold    ""      B             different system

pmRoleTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmRoleEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The role string table.

         The agent must store role string associations in nonvolatile
         storage."
    ::= { pmMib 4 }

pmRoleEntry OBJECT-TYPE
    SYNTAX      PmRoleEntry
    MAX-ACCESS  not-accessible
    STATUS      current





Various Authors      Expires Aug 28, 2002            [Page 91]


Internet Draft    Policy-Based Management MIB November 7, 2001


    DESCRIPTION
         "A role string entry associates a role string with an
         individual element."
    INDEX       { pmRoleElement, pmRoleContextName,
                  pmRoleContextEngineID, pmRoleString }
    ::= { pmRoleTable 1 }

PmRoleEntry ::= SEQUENCE {
    pmRoleElement          RowPointer,
    pmRoleContextName      SnmpAdminString,
    pmRoleContextEngineID  OCTET STRING,
    pmRoleString           UTF8String,
    pmRoleStatus           RowStatus
}

pmRoleElement OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The element to which this role string is associated.

         For example, if the element is interface #3, then this object
         will contain the OID for 'ifIndex.3'.

         If the agent assigns new indexes in the MIB table to
         represent the same underlying element (re-indexing), the
         agent will modify this value to contain the new index for the
         underlying element."
    ::= { pmRoleEntry 1 }

pmRoleContextName OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is not in the default SNMP context
        for the target system, this object is used to identify the
        context. If the element is in the default context, this object
        is equal to the empty string."
    ::= { pmRoleEntry 2 }

pmRoleContextEngineID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  not-accessible





Various Authors      Expires Aug 28, 2002            [Page 92]


Internet Draft    Policy-Based Management MIB November 7, 2001


    STATUS      current
    DESCRIPTION
        "If the associated element is on a remote system, this object
        is used to identify the remote system. This object contains
        the contextEngineID of the system for which this role string
        assignment is valid. If the element is on the local system
        this object will be the empty string."
    ::= { pmRoleEntry 3 }

pmRoleString OBJECT-TYPE
    SYNTAX      UTF8String (SIZE (0..64))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The role string that is associated with an element through
         this table.

         A role string is an administratively specified characteristic
         of a managed element (for example, an interface). It is a
         selector for policy rules, to determine the applicability of
         the rule to a particular managed element."
    ::= { pmRoleEntry 4 }

pmRoleStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The status of this role string."
    ::= { pmRoleEntry 5 }

-- Capabilities table

-- The pmCapabilitiesTable contains a description of
-- the inherent capabilities of the system so that
-- management stations can learn of an agent's capabilities and
-- differentially install policies based on the capabilities.

pmCapabilitiesTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmCapabilitiesEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmCapabilitiesTable lists the capabilities of a system
         so that policies can be differentially installed by





Various Authors      Expires Aug 28, 2002            [Page 93]


Internet Draft    Policy-Based Management MIB November 7, 2001


         management systems based on capabilities.

         Capabilities are expressed at the system level. There can be
         variation in how capabilities are realized from one vendor or
         model to the next. Management systems should consider these
         differences before selecting which policy to install in a
         system."
    ::= { pmMib 5 }

pmCapabilitiesEntry OBJECT-TYPE
    SYNTAX      PmCapabilitiesEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "A capabilities entry holds an OID indicating support for a
         particular capability. Capabilities may include hardware and
         software functions as well as the implementation of MIBs.
         The semantics of the OID are defined in the description of
         pmCapabilitiesType.

         Entries appear in this table if any element in the system has
         a specific capability. A capability should appear in this
         table only once regardless of the number of elements in the
         system with that capability. An entry is removed from this
         table when the last element in the system that has the
         capability is removed. In some cases, capabilities are
         dynamic and exist only in software. This table should have an
         entry for the capability even if there are no current
         instances. Examples include systems with database or WEB
         services. While the system has the ability to create new
         databases or WEB services, the entry should exist. In these
         cases, the ability to create these services could come from
         other processes that are running in the system even though
         there are no currently open databases or WEB servers running.

         Capabilities may include the implementation of MIBs but need
         not be limited to those that represent MIBs with one or more
         configurable objects. It may also be valuable to include
         entries for capabilities that do not include configuration
         objects since that information, in combination with other
         entries in this table, might be used by the management
         software to determine whether or not to install a policy.

         Vendor software may also add entries in this table to express
         capabilities from their private branch."





Various Authors      Expires Aug 28, 2002            [Page 94]


Internet Draft    Policy-Based Management MIB November 7, 2001


    INDEX       { pmCapabilitiesType }
    ::= { pmCapabilitiesTable 1 }

PmCapabilitiesEntry ::= SEQUENCE {
    pmCapabilitiesType               OBJECT IDENTIFIER
}

pmCapabilitiesType OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "There are three types of OIDs that may be present in the
         pmCapabilitiesType object:

         1) The OID of a MODULE-COMPLIANCE macro that represents the
         highest level of compliance realized by the agent for that
         MIB. For example, an agent that implements the OSPF MIB at
         the highest level of compliance would have the value of
         '1.3.6.1.2.1.14.15.2' in the pmCapabilitiesType object.  In
         the case of software that realizes standard MIBs that do not
         have compliance statements, the base OID of the MIB should be
         used instead. If the OSPF MIB had not been created with a
         compliance statement, then the correct value of the
         pmCapabilitiesType would be '1.3.6.1.2.1.14'. In the cases
         where multiple compliance statements in a MIB are supported
         by the agent, and one compliance statement does not by
         definition include the other, each of the compliance OIDs
         would have entries in this table.

         MIB Documents can contain more than one MIB. In the case
         of OSPF, there is a second MIB in that document that
         describes traps for the OSPF Version 2 Protocol. If the agent
         also realizes these functions, an entry will also exist for
         those capabilities in this table.

         2) Vendors should install OIDs in this table that represent
         vendor-specific capabilities. These capabilities can be
         expressed just as those described above for standard MIBs.
         In addition, vendors may install any OID they desire from
         their registered branch. The OIDs may be at any level of
         granularity, from the root of their entire branch to an
         instance of a single OID. There is no restriction on the
         number of registrations they may make, though care should be
         taken to avoid unnecessary entries.





Various Authors      Expires Aug 28, 2002            [Page 95]


Internet Draft    Policy-Based Management MIB November 7, 2001


         3) OIDs that represent one or a collection of capabilities
         which could be any collection of MIB Objects or hardware or
         software functions may be created in working groups and
         registered with IANA. Other entities (e.g., vendors) may also
         make registrations. Software will register these standard
         capability OIDs as well as vendor specific OIDs.

         If the OID for a known capability is not present in the
         table, then it should be assumed that the capability is not
         implemented."
    ::= { pmCapabilitiesEntry 1 }

-- Capabilities override table

pmCapabilitiesOverrideTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmCapabilitiesOverrideEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmCapabilitiesOverrideTable allows management stations
         to override pmCapabilitiesTable entries that have been
         registered by the agent. This facility can be used to avoid
         the condition where managers in the network send policies to
         a system that has advertised a capability in the
         pmCapabilitiesTable but which should not be installed on this
         particular system. One case could be newly deployed equipment
         that is still in a trial state, or when resources are
         reserved for some other administrative reason. This table can
         also be used to override entries in the pmCapabilitiesTable
         through the use of the pmCapabilitiesOverrideState
         object. Capabilities can also be declared available in this
         table that were not registered in the pmCapabilitiesTable. A
         management application can make an entry in this table for
         any valid OID and declare the capability available by setting
         the pmCapabilitiesOverrideState for that row to valid(1)."
    ::= { pmMib 6 }

pmCapabilitiesOverrideEntry OBJECT-TYPE
    SYNTAX      PmCapabilitiesOverrideEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An entry in this table indicates whether a particular
         capability is valid or invalid."
    INDEX       { pmCapabilitiesOverrideType }





Various Authors      Expires Aug 28, 2002            [Page 96]


Internet Draft    Policy-Based Management MIB November 7, 2001


    ::= { pmCapabilitiesOverrideTable 1 }

PmCapabilitiesOverrideEntry ::= SEQUENCE {
    pmCapabilitiesOverrideType               OBJECT IDENTIFIER,
    pmCapabilitiesOverrideState              INTEGER,
    pmCapabilitiesOverrideRowStatus          RowStatus
}

pmCapabilitiesOverrideType OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "This is the OID of the capability that is declared valid or
         invalid by the pmCapabilitiesOverrideState value for this
         row. Any valid OID as described in the pmCapabilitiesTable is
         permitted in the pmCapabilitiesOverrideType object. This means
         that capabilities can be expressed at any level from a specific
         instance of an object to a table or entire module. There are no
         restrictions on whether these objects are from standards track
         MIB documents or in the private branch of the MIB.

         If an entry exists in this table for which there is a
         corresponding entry in the pmCapabilitiesTable, then this entry
         shall have precedence over the entry in the
         pmCapabilitiesTable. All entries in this table must be
         preserved across reboots."
    ::= { pmCapabilitiesOverrideEntry 1 }

pmCapabilitiesOverrideState OBJECT-TYPE
    SYNTAX      INTEGER {
                    invalid(0),
                    valid(1)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "A pmCapabilitiesOverrideState of invalid indicates that
         management software should not send policies to this system
         for the capability identified in the
         pmCapabilitiesOverrideType for this row of the table. This
         behavior is the same whether the capability represented by
         the pmCapabilitiesOverrideType exists only in this table,
         that is it was installed by an external management
         application, or exists in this table as well as the





Various Authors      Expires Aug 28, 2002            [Page 97]


Internet Draft    Policy-Based Management MIB November 7, 2001


         pmCapabilitiesTable. This would be the case when a manager
         wanted to disable a capability that the native management
         system found and registered in the pmCapabilitiesTable.

         An entry in this table that has a pmCapabilitiesOverrideState
         of valid should be treated as if it appeared in the
         pmCapabilitiesTable. If the entry also exists in the
         pmCapabilitiesTable in the pmCapabilitiesType object, and the
         value of this object is valid, then the system shall operate
         as if this entry did not exist and policy installations and
         executions will continue in a normal fashion."
    ::= { pmCapabilitiesOverrideEntry 2 }

pmCapabilitiesOverrideRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "The row status of this pmCapabilitiesOverrideEntry."
    ::= { pmCapabilitiesOverrideEntry 3 }

-- The Schedule Group

pmSchedLocalTime OBJECT-TYPE
    SYNTAX      DateAndTime (SIZE (11))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The local time used by the scheduler. Schedules which
         refer to calendar time will use the local time indicated
         by this object. An implementation MUST return all 11 bytes
         of the DateAndTime textual-convention so that a manager
         may retrieve the offset from GMT time."
    ::= { pmMib 7 }

--
-- The schedule table which controls the scheduler.
--

pmSchedTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmSchedEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines schedules for policies."





Various Authors      Expires Aug 28, 2002            [Page 98]


Internet Draft    Policy-Based Management MIB November 7, 2001


    ::= { pmMib 8 }

pmSchedEntry OBJECT-TYPE
    SYNTAX      PmSchedEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry describing a particular schedule.

        Unless noted otherwise, writable objects of this row can be
        modified independent of the current value of pmSchedRowStatus,
        pmSchedAdminStatus and pmSchedOperStatus.  In particular, it
        is legal to modify pmSchedWeekDay, pmSchedMonth, pmSchedDay,
        pmSchedHour, and pmSchedMinute when pmSchedRowStatus is
        active."
    INDEX { pmSchedIndex }
    ::= { pmSchedTable 1 }

PmSchedEntry ::= SEQUENCE {
    pmSchedIndex          Unsigned32,
    pmSchedGroupIndex     Unsigned32,
    pmSchedDescr          UTF8String,
    pmSchedTimePeriod     UTF8String,
    pmSchedMonth          BITS,
    pmSchedDay            BITS,
    pmSchedWeekDay        BITS,
    pmSchedTimeOfDay      UTF8String,
    pmSchedLocalOrUtc     INTEGER,
    pmSchedStorageType    StorageType,
    pmSchedRowStatus      RowStatus
}

pmSchedIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The locally-unique, administratively assigned index for this
        scheduling entry."
    ::= { pmSchedEntry 1 }

pmSchedGroupIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  read-create
    STATUS      current





Various Authors      Expires Aug 28, 2002            [Page 99]


Internet Draft    Policy-Based Management MIB November 7, 2001


    DESCRIPTION
        "The locally-unique, administratively assigned index for the
        schedule group that this scheduling entry belongs to.

        To assign multiple schedule entries to the same group, the
        pmSchedGroupIndex of each entry in the group will be set to
        the same value. This pmSchedGroupIndex value must be equal to
        the pmSchedIndex of one of the entries in the group. If the
        entry is deleted whose pmSchedIndex equals the
        pmSchedGroupIndex for the group, the agent will assign a new
        pmSchedGroupIndex to all remaining members of the group.

        If an entry is not a member of a group, its pmSchedGroupIndex
        must be assigned to the value of its pmSchedIndex.

        Policies that are controlled by a group of schedule entries
        are active when any schedule in the group is active."
    ::= { pmSchedEntry 2 }

pmSchedDescr OBJECT-TYPE
    SYNTAX      UTF8String
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The human readable description of the purpose of this
        scheduling entry."
    DEFVAL { ''H }
    ::= { pmSchedEntry 3 }

pmSchedTimePeriod OBJECT-TYPE
    SYNTAX      UTF8String (SIZE (0..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The overall range of calendar dates and times over which this
        schedule is active. It is stored in a slightly extended version
        of the format for a 'period-explicit' defined in RFC 2445
        [22]. This format is expressed as a string representing the
        starting date and time, in which the character 'T' indicates
        the beginning of the time portion, followed by the solidus
        character '/', followed by a similar string representing an
        end date and time. The start of the period MUST be before the
        end of the period. Date-Time values are expressed as
        substrings of the form 'yyyymmddThhmmss'. For example:






Various Authors      Expires Aug 28, 2002           [Page 100]


Internet Draft    Policy-Based Management MIB November 7, 2001


            20000101T080000/20000131T120000

              January 1, 2000, 0800 through January 31, 2000, noon

        The 'Date with UTC time' format defined in RFC 2445 in which
        the Date-Time string ends with the character 'Z' is not
        allowed.

        This 'period-explicit' format is also extended to allow two
        special cases in which one of the Date-Time strings is
        replaced with a special string defined in RFC 2445:

        1. If the first Date-Time value is replaced with the string
           'THISANDPRIOR', then the value indicates that the schedule
           is active at any time prior to the Date-Time that appears
           after the '/'.

        2. If the second Date-Time is replaced with the string
           'THISANDFUTURE', then the value indicates that the schedule
           is active at any time after the Date-Time that appears
           before the '/'.

        Note that while RFC 2445 defines these two strings, they are
        not specified for use in the 'period-explicit' format. The use
        of these strings represents an extension to the
        'period-explicit' format."
    ::= { pmSchedEntry 4 }

pmSchedMonth OBJECT-TYPE
    SYNTAX      BITS {
                    january(0),
                    february(1),
                    march(2),
                    april(3),
                    may(4),
                    june(5),
                    july(6),
                    august(7),
                    september(8),
                    october(9),
                    november(10),
                    december(11)
                }
    MAX-ACCESS  read-create
    STATUS      current





Various Authors      Expires Aug 28, 2002           [Page 101]


Internet Draft    Policy-Based Management MIB November 7, 2001


    DESCRIPTION
        "Within the overall time period specified in the
        pmSchedTimePeriod object, the value of this object specifies
        the specific months within that time period that the schedule
        is active. Setting all bits will cause the schedule to act
        independently of the month."
    DEFVAL { { january, february, march, april, may, june, july,
               august, september, october, november, december } }
    ::= { pmSchedEntry 5 }

pmSchedDay OBJECT-TYPE
    SYNTAX      BITS {
                    d1(0),   d2(1),   d3(2),   d4(3),   d5(4),
                    d6(5),   d7(6),   d8(7),   d9(8),   d10(9),
                    d11(10), d12(11), d13(12), d14(13), d15(14),
                    d16(15), d17(16), d18(17), d19(18), d20(19),
                    d21(20), d22(21), d23(22), d24(23), d25(24),
                    d26(25), d27(26), d28(27), d29(28), d30(29),
                    d31(30),
                    r1(31),  r2(32),  r3(33),  r4(34),  r5(35),
                    r6(36),  r7(37),  r8(38),  r9(39),  r10(40),
                    r11(41), r12(42), r13(43), r14(44), r15(45),
                    r16(46), r17(47), r18(48), r19(49), r20(50),
                    r21(51), r22(52), r23(53), r24(54), r25(55),
                    r26(56), r27(57), r28(58), r29(59), r30(60),
                    r31(61)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Within the overall time period specified in the
        pmSchedTimePeriod object, the value of this object specifies
        the specific days of the month within that time period that
        the schedule is active.

        There are two sets of bits one can use to define the day
        within a month:

        Enumerations starting with the letter 'd' indicate a
        day in a month relative to the first day of a month.
        The first day of the month can therefore be specified
        by setting the bit d1(0) and d31(30) means the last
        day of a month with 31 days.

        Enumerations starting with the letter 'r' indicate a





Various Authors      Expires Aug 28, 2002           [Page 102]


Internet Draft    Policy-Based Management MIB November 7, 2001


        day in a month in reverse order, relative to the last
        day of a month. The last day in the month can therefore
        be specified by setting the bit r1(31), and r31(61) means
        the first day of a month with 31 days.

        Setting multiple bits will include several days in the set
        of possible days for this schedule.  Setting all bits starting
        with the letter 'd' or all bits starting with the letter 'r'
        will cause the schedule to act independently of the day of the
        month."
    DEFVAL { {  d1, d2, d3, d4, d5, d6, d7, d8, d9, d10,
                d11, d12, d13, d14, d15, d16, d17, d18, d19, d20,
                d21, d22, d23, d24, d25, d26, d27, d28, d29, d30,
                d31, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10,
                r11, r12, r13, r14, r15, r16, r17, r18, r19, r20,
                r21, r22, r23, r24, r25, r26, r27, r28, r29, r30,
                r31 } }
    ::= { pmSchedEntry 6 }

pmSchedWeekDay OBJECT-TYPE
    SYNTAX      BITS {
                    sunday(0),
                    monday(1),
                    tuesday(2),
                    wednesday(3),
                    thursday(4),
                    friday(5),
                    saturday(6)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Within the overall time period specified in the
        pmSchedTimePeriod object, the value of this object specifies
        the specific days of the week within that time period that
        the schedule is active. Setting all bits will cause the
        schedule to act independently of the day of the week."
    DEFVAL { { sunday, monday, tuesday, wednesday, thursday,
               friday, saturday } }
    ::= { pmSchedEntry 7 }

pmSchedTimeOfDay OBJECT-TYPE
    SYNTAX      UTF8String (SIZE (0..15))
    MAX-ACCESS  read-create
    STATUS      current





Various Authors      Expires Aug 28, 2002           [Page 103]


Internet Draft    Policy-Based Management MIB November 7, 2001


    DESCRIPTION

        "Within the overall time period specified in the
        pmSchedTimePeriod object, the value of this object specifies
        the range of times in a day that the schedule is active.

        This value is stored in a format based on the RFC 2445 format
        for 'time': The character 'T' followed by a 'time' string,
        followed by the solidus character '/', followed by the
        character 'T' followed by a second time string. The first time
        indicates the beginning of the range, while the second time
        indicates the end.  Thus, this value takes the form:
            'Thhmmss/Thhmmss'.

        The second substring always identifies a later time than the
        first substring.  To allow for ranges that span midnight,
        however, the value of the second string may be smaller than
        the value of the first substring.  Thus, 'T080000/T210000'
        identifies the range from 0800 until 2100, while
        'T210000/T080000' identifies the range from 2100 until 0800 of
        the following day.

        When a range spans midnight, it by definition includes parts
        of two successive days.  When one of these days is also
        selected by either the MonthOfYearMask, DayOfMonthMask, and/or
        DayOfWeekMask, but the other day is not, then the policy is
        active only during the portion of the range that falls on the
        selected day.  For example, if the range extends from 2100
        until 0800, and the day of week mask selects Monday and
        Tuesday, then the policy is active during the following three
        intervals:

            From midnight Sunday until 0800 Monday;
            From 2100 Monday until 0800 Tuesday;
            From 2100 Tuesday until 23:59:59 Tuesday.

         Setting this value to 'T000000/T235959' will cause the
         schedule to act independently of the time of day."
    DEFVAL { '543030303030302F54323335393539'H } -- T000000/T235959
    ::= { pmSchedEntry 8 }

pmSchedLocalOrUtc OBJECT-TYPE
    SYNTAX      INTEGER {
                    localTime(1),
                    utcTime(2)





Various Authors      Expires Aug 28, 2002           [Page 104]


Internet Draft    Policy-Based Management MIB November 7, 2001


                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the times represented in the
        TimePeriod object and in the various Mask objects represent
        local times or UTC times."
    DEFVAL { utcTime }
    ::= { pmSchedEntry 9 }

pmSchedStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object defines whether this schedule entry is kept
         in volatile storage and lost upon reboot or if this row is
         backed up by non-volatile or permanent storage.

         Conceptual rows having the value `permanent' must allow write
         access to the columnar objects pmSchedDescr, pmSchedWeekDay,
         pmSchedMonth, pmSchedDay, pmSchedHour, and pmSchedMinute."
    DEFVAL { volatile }
    ::= { pmSchedEntry 10 }

pmSchedRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this schedule entry."
    ::= { pmSchedEntry 11 }

-- Policy Tracking

-- The "policy to element" (PE) table and the "element to policy" (EP)
-- table track the status of execution contexts grouped by policy and
-- element respectively.

pmTrackingPETable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmTrackingPEEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmTrackingPETable describes what elements





Various Authors      Expires Aug 28, 2002           [Page 105]


Internet Draft    Policy-Based Management MIB November 7, 2001


         are active (under control of) a policy. This table is indexed
         in order to optimize retrieval of the entire status for a
         given policy."
    ::= { pmMib 9 }

pmTrackingPEEntry OBJECT-TYPE
    SYNTAX      PmTrackingPEEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An entry in the pmTrackingPETable.  The pmPolicyIndex in
         the index specifies the policy tracked by this entry."
    INDEX       { pmPolicyIndex, pmTrackingPEElement,
                  pmTrackingPEContextName, pmTrackingPEContextEngineID }
    ::= { pmTrackingPETable 1 }

PmTrackingPEEntry ::= SEQUENCE {
    pmTrackingPEElement          RowPointer,
    pmTrackingPEContextName      SnmpAdminString,
    pmTrackingPEContextEngineID  OCTET STRING,
    pmTrackingPEInfo             BITS
}

pmTrackingPEElement OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The element that is acted upon by the associated policy."
    ::= { pmTrackingPEEntry 1 }

pmTrackingPEContextName OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is not in the default SNMP context
        for the target system, this object is used to identify the
        context. If the element is in the default context, this object
        is equal to the empty string."
    ::= { pmTrackingPEEntry 2 }

pmTrackingPEContextEngineID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  not-accessible





Various Authors      Expires Aug 28, 2002           [Page 106]


Internet Draft    Policy-Based Management MIB November 7, 2001


    STATUS      current
    DESCRIPTION
        "If the associated element is on a remote system, this object
        is used to identify the remote system. This object contains
        the contextEngineID of the system on which the associated
        element resides. If the element is on the local system
        this object will be the empty string."
    ::= { pmTrackingPEEntry 3 }

pmTrackingPEInfo OBJECT-TYPE
    SYNTAX      BITS {
                    actionSkippedDueToPrecedence(0),
                    conditionRunTimeException(1),
                    conditionUserSignal(2),
                    actionRunTimeException(3),
                    actionUserSignal(4)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "This object returns information about the previous policy
         script executions.

         If the actionSkippedDueToPrecedence(1) bit is set, the last
         execution of the associated policy condition returned non-zero
         but the action is not active because it was trumped by a
         matching policy condition in the same precedence group with a
         higher precedence value.

         If the conditionRunTimeException(2) bit is set, the last
         execution of the associated policy condition encountered a
         run-time exception and aborted.

         If the conditionUserSignal(3) bit is set, the last
         execution of the associated policy condition called the
         signalError() function.

         If the actionRunTimeException(4) bit is set, the last
         execution of the associated policy action encountered a
         run-time exception and aborted.

         If the actionUserSignal(5) bit is set, the last
         execution of the associated policy action called the
         signalError() function.






Various Authors      Expires Aug 28, 2002           [Page 107]


Internet Draft    Policy-Based Management MIB November 7, 2001


         Entries will only exist in this table of one or more bits are
         set. In particular, if an entry does not exist for a
         particular policy/element combination, it can be assumed that
         the policy's condition did not match this element."
    ::= { pmTrackingPEEntry 4 }

-- Element to Policy Table

pmTrackingEPTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmTrackingEPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmTrackingEPTable describes what policies
         are controlling an element. This table is indexed in
         order to optimize retrieval of the status of all policies
         active for a given element."
    ::= { pmMib 10 }

pmTrackingEPEntry OBJECT-TYPE
    SYNTAX      PmTrackingEPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An entry in the pmTrackingEPTable. Entries exist for all
         element/policy combinations for which the policy's condition
         matches and only if the schedule for the policy is active.

         The pmPolicyIndex in the index specifies the policy
         tracked by this entry."
    INDEX       { pmTrackingEPElement, pmTrackingEPContextName,
                  pmTrackingEPContextEngineID, pmPolicyIndex }
    ::= { pmTrackingEPTable 1 }

PmTrackingEPEntry ::= SEQUENCE {
    pmTrackingEPElement          RowPointer,
    pmTrackingEPContextName      SnmpAdminString,
    pmTrackingEPContextEngineID  OCTET STRING,
    pmTrackingEPStatus           INTEGER
}

pmTrackingEPElement OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  not-accessible
    STATUS      current





Various Authors      Expires Aug 28, 2002           [Page 108]


Internet Draft    Policy-Based Management MIB November 7, 2001


    DESCRIPTION
         "The element acted upon by the associated policy."
    ::= { pmTrackingEPEntry 1 }

pmTrackingEPContextName OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is not in the default SNMP context
        for the target system, this object is used to identify the
        context. If the element is in the default context, this object
        is equal to the empty string."
    ::= { pmTrackingEPEntry 2 }

pmTrackingEPContextEngineID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is on a remote system, this object
        is used to identify the remote system. This object contains
        the contextEngineID of the system on which the associated
        element resides. If the element is on the local system
        this object will be the empty string."
    ::= { pmTrackingEPEntry 3 }

pmTrackingEPStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    on(0),
                    forceOff(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This entry will only exist if the calendar for the policy is
         active and if the associated policyCondition returned 1 for this
         element.

         A policy can be forcibly disabled on a particular element
         by setting this value to forceOff(1). The agent should then
         act as if the policyCondition failed for this element. The
         forceOff(1) state will persist (even across reboots) until
         this value is set to on(0) by a management request. The
         forceOff(1) state may be set even if the entry does not





Various Authors      Expires Aug 28, 2002           [Page 109]


Internet Draft    Policy-Based Management MIB November 7, 2001


         previously exist so that future policy invocations can be
         avoided.

         Unless forcibly disabled, if this value exists its value
         will be on(0)."
    ::= { pmTrackingEPEntry 4 }

-- Policy Debugging Table

-- Policies that have debugging turned on will generate a log entry in
-- the policy debugging table for every runtime exception that occurs
-- in either the condition or action code.

pmDebuggingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PmDebuggingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The pmDebuggingTable logs debugging messages when
         policies experience run-time exceptions in either the condition
         or action code and the associated pmPolicyDebugging object
         has been turned on.

         It is an implementation-dependent manner as to the maximum
         number of debugging entries that will be stored and the
         maximum length of time an entry will be kept. If entries must
         be discarded to make room for new entries, the oldest entries
         must be discarded first."
    ::= { pmMib 11 }

pmDebuggingEntry OBJECT-TYPE
    SYNTAX      PmDebuggingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "An entry in the pmDebuggingTable. The pmPolicyIndex in the
         index specifies the policy that encountered the exception
         that led to this log entry."
    INDEX       { pmPolicyIndex, pmDebuggingElement,
                  pmDebuggingContextName, pmDebuggingContextEngineID,
                  pmDebuggingLogIndex }
    ::= { pmDebuggingTable 1 }

PmDebuggingEntry ::= SEQUENCE {
    pmDebuggingElement          RowPointer,





Various Authors      Expires Aug 28, 2002           [Page 110]


Internet Draft    Policy-Based Management MIB November 7, 2001


    pmDebuggingContextName      SnmpAdminString,
    pmDebuggingContextEngineID  OCTET STRING,
    pmDebuggingLogIndex         Unsigned32,
    pmDebuggingMessage          UTF8String
}

pmDebuggingElement OBJECT-TYPE
    SYNTAX      RowPointer
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The element the policy was executing on when it encountered
         the error that led to this log entry.

         For example, if the element is interface #3, then this object
         will contain the OID for 'ifIndex.3'."
    ::= { pmDebuggingEntry 1 }

pmDebuggingContextName OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is not in the default SNMP context
        for the target system, this object is used to identify the
        context. If the element is in the default context, this object
        is equal to the empty string."
    ::= { pmDebuggingEntry 2 }

pmDebuggingContextEngineID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "If the associated element is on a remote system, this object
        is used to identify the remote system. This object contains
        the contextEngineID of the system on which the associated
        element resides. If the element is on the local system
        this object will be the empty string."
    ::= { pmDebuggingEntry 3 }

pmDebuggingLogIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current





Various Authors      Expires Aug 28, 2002           [Page 111]


Internet Draft    Policy-Based Management MIB November 7, 2001


    DESCRIPTION
         "A unique index for this log entry amongst other log entries
         for this policy/element combination."
    ::= { pmDebuggingEntry 4 }

pmDebuggingMessage OBJECT-TYPE
    SYNTAX      UTF8String (SIZE (0..128))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "An error message generated by the policy execution
         environment. It's recommended that this message include the
         time of day that the message was generated, if known."
    ::= { pmDebuggingEntry 5 }

-- Notifications

pmNotifications OBJECT IDENTIFIER ::= { pmMib 0 }

pmNewRoleNotification NOTIFICATION-TYPE
    OBJECTS     { pmRoleStatus }
    STATUS      current
    DESCRIPTION
        "The pmNewRoleNotification is sent when an agent is configured with
        its first instance of a previously unused role string (not
        every time a new element is given a particular role).

        An instance of the pmRoleStatus object is sent containing
        the new roleString in its index. In the event that two or
        more elements are given the same role simultaneously, it is an
        implementation-dependent matter as to which pmRoleTable
        instance will be included in the notification."
    ::= { pmNotifications 1 }

pmNewCapabilityNotification NOTIFICATION-TYPE
    OBJECTS     { pmCapabilitiesType }
    STATUS      current
    DESCRIPTION
        "The pmNewCapabilityNotification is sent when an agent
        gains a new capability that did not previously exist in any
        element on the system (not every time an element gains a
        particular capability).

        An instance of the pmCapabilitiesType object is sent containing
        the identity of the new capability. In the event that two or





Various Authors      Expires Aug 28, 2002           [Page 112]


Internet Draft    Policy-Based Management MIB November 7, 2001


        more elements gain the same capability simultaneously, it is an
        implementation-dependent matter as to which pmCapabilitiesType
        instance will be included in the notification."
    ::= { pmNotifications 2 }

pmAbnormalTermNotification NOTIFICATION-TYPE
    OBJECTS     { pmTrackingPEInfo }
    STATUS      current
    DESCRIPTION
        "The pmAbnormalTermNotification is sent when a policy's
        pmPolicyAbnormalTerminations gauge changes value from zero to
        any value greater than zero and no such notification has been
        sent for that policy in the last 5 minutes.

        The notification contains an instance of the pmTrackingPEInfo
        object where the pmPolicyIndex component of the index
        identifies the associated policy and the rest of the index
        identifies an element on which the policy failed."
    ::= { pmNotifications 3 }

-- Compliance Statements

    pmConformance   OBJECT IDENTIFIER ::= { pmMib 20 }
    pmCompliances   OBJECT IDENTIFIER ::= { pmConformance 1 }
    pmGroups        OBJECT IDENTIFIER ::= { pmConformance 2 }

pmCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "Describes the requirements for conformance to
        the Policy-Based Management MIB"
    MODULE  -- this module
        MANDATORY-GROUPS { pmPolicyManagementGroup, pmSchedGroup,
                           pmNotificationGroup }
    ::= { pmCompliances 1 }

pmPolicyManagementGroup OBJECT-GROUP
    OBJECTS { pmPolicyPrecedenceGroup, pmPolicyPrecedence,
              pmPolicySchedule, pmPolicyElementTypeFilter,
              pmPolicyConditionScriptIndex, pmPolicyActionScriptIndex,
              pmPolicyParameters,
              pmPolicyConditionMaxLatency, pmPolicyActionMaxLatency,
              pmPolicyMaxIterations,
              pmPolicyDescription, pmPolicyMatches,
              pmPolicyAbnormalTerminations,





Various Authors      Expires Aug 28, 2002           [Page 113]


Internet Draft    Policy-Based Management MIB November 7, 2001


              pmPolicyExecutionErrors, pmPolicyDebugging,
              pmPolicyStorageType, pmPolicyAdminStatus,
              pmPolicyRowStatus, pmPolicyCodeText, pmPolicyCodeStatus,
              pmElementTypeRegMaxLatency, pmElementTypeRegDescription,
              pmElementTypeRegStorageType, pmElementTypeRegRowStatus,
              pmRoleStatus,
              pmCapabilitiesType, pmCapabilitiesOverrideState,
              pmCapabilitiesOverrideRowStatus,
              pmTrackingPEInfo,
              pmTrackingEPStatus,
              pmDebuggingMessage }
    STATUS  current
    DESCRIPTION
        "Objects that allow for the creation and management of
        configuration policies."
    ::=  { pmGroups 1 }

pmSchedGroup OBJECT-GROUP
    OBJECTS { pmSchedLocalTime, pmSchedGroupIndex,
              pmSchedDescr, pmSchedTimePeriod,
              pmSchedMonth, pmSchedDay, pmSchedWeekDay,
              pmSchedTimeOfDay, pmSchedLocalOrUtc, pmSchedStorageType,
              pmSchedRowStatus
            }
    STATUS current
    DESCRIPTION
        "Objects that allow for the scheduling of policies."
    ::= { pmGroups 2 }

pmNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS { pmNewRoleNotification,
                    pmNewCapabilityNotification,
                    pmAbnormalTermNotification }
    STATUS        current
    DESCRIPTION
        "Notifications sent by an Policy MIB agent."
    ::= { pmGroups 3 }

pmBaseFunctionLibrary OBJECT IDENTIFIER ::= { pmGroups 4 }

END









Various Authors      Expires Aug 28, 2002           [Page 114]


Internet Draft    Policy-Based Management MIB November 7, 2001


12.  Relationship to other MIBs

When using policy-based management specifically for (policy-
based) configuration, the "Configuring Networks and Devices
With SNMP" [xxx] document describes configuration management
practices, terminology, and an example MIB Module that may be
helpful to those developing and using this technology.

The Policy MIB accesses system instrumentation for the purpose
of policy evaluation, control, notification, monitoring and
error reporting. This information is available to managers in
the form of MIB objects. Detail information about system
configuration is modified by the Policy MIB through MIB
objects defined in other MIBs.

Details about the operational or configuration details of a
system are retrieved by the manager via access to the specific
MIB objects available in a network element. As such the Policy
MIB can use any standard or vendor-defined object that exists
on a managed system. In particular, the Policy MIB may access
standard or vendor specific objects that are instance-specific
such as BGP time out parameters, specific interface counters,
etc.


13.  Security Considerations

There are a number of management objects defined in this MIB
that have a MAX-ACCESS clause of read-write and/or read-
create.  Such objects may be considered sensitive or
vulnerable in some network environments.  The support for SET
operations in a non-secure environment without proper
protection can have a negative effect on network operations.

SNMPv1 by itself is not a secure environment.  Even if the
network itself is secure (for example by using IPSec), even
then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the
objects in this MIB.

It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework.  Specifically,
the use of the User-based Security Model RFC 2574 [12] and the
View-based Access Control Model RFC 2575 [15] is recommended.






Various Authors      Expires Aug 28, 2002           [Page 115]


Internet Draft    Policy-Based Management MIB November 7, 2001


It is then a customer/user responsibility to ensure that the
SNMP entity giving access to an instance of this MIB, is
properly configured to give access to the objects only to
those principals (users) that have legitimate rights to indeed
GET or SET (change/create/delete) them.

Access control for SNMP requests made to the local system
depends on the security credentials of the last entity to
modify a policy's pmPolicyAdminStatus object. These security
credentials are the input parameters for isAccessAllowed from
the Architecture for Describing SNMP Management Frameworks[1].

Unless all users who have write access to the pmPolicyTable
and pmPolicyCodeTable have equivalent access to the managed
system, policy scripts could be used by a user to gain the
privileges of another user. Therefore, when policy users have
different access, access control should be applied so that a
user's policies cannot be modified by another user. To make
this more convenient, a user can place all of their policies
in the same pmPolicyAdminGroup so that a single access control
view can apply to all of them.

Some policies may be designed to ensure the security of a
network. If these policies have not been installed pending the
appearance of a role or capability, some delay will occur in
the activation of these policies when the role or capability
appears because a responsible manager must notice the change
and install the policy. This delay may expose the device or
the network to unacceptable security vulnerabilities during
this delay. If the role or capability appears during a time of
network stress or when the management station is unavailable,
this delay could be extensive, further increasing the
exposure. It is recommended that management stations install
any security-related policies that might ever be needed on a
particular managed device, even if a nonexistent role or
capability suggests it is not needed at a given time.


14.  Acknowledgements

The authors gratefully acknowledge the significant
contributions to this work made by Jeff Case, Joel Halpern,
Pablo Halpern, Bob Moore, Steve Moulton, David Partain and
Walter Weiss.






Various Authors      Expires Aug 28, 2002           [Page 116]


Internet Draft    Policy-Based Management MIB November 7, 2001


15.  Author's Addresses





Steve Waldbusser

Phone: +1-650-948-6500
Fax:   +1-650-745-0671
Email: waldbusser@nextbeacon.com




Jon Saperia (WG Co-chair)
JDS Consulting, Inc.
174 Chapman St.
Watertown MA 02472-3063
USA
Phone: +1-617-744-1079
Fax:   +1-617-249-0874
Email: saperia@jdscons.com




Thippanna Hongal
Riverstone Networks, Inc.
5200 Great America Parkway
Santa Clara, CA, 95054
USA

Phone: +1-408-878-6562
Fax:   +1-408-878-6501
Email: hongal@riverstonenet.com














Various Authors      Expires Aug 28, 2002           [Page 117]


Internet Draft    Policy-Based Management MIB November 7, 2001


16.  References

[1]  Harrington, D., Presuhn, R., and B. Wijnen, "An
     Architecture for Describing SNMP Management Frameworks",
     RFC 2571, April 1999.

[2]  Rose, M., and K. McCloghrie, "Structure and
     Identification of Management Information for TCP/IP-based
     Internets", STD 16, RFC 1155, May 1990.

[3]  Rose, M., and K. McCloghrie, "Concise MIB Definitions",
     STD 16, RFC 1212, March 1991.

[4]  Rose, M., "A Convention for Defining Traps for use with
     the SNMP", RFC 1215, March 1991.

[5]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
     Rose, M., and S. Waldbusser, "Structure of Management
     Information Version 2 (SMIv2)", STD 58, RFC 2578, April
     1999.

[6]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
     Rose, M., and S. Waldbusser, "Textual Conventions for
     SMIv2", STD 58, RFC 2579, April 1999.

[7]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
     Rose, M., and S. Waldbusser, "Conformance Statements for
     SMIv2", STD 58, RFC 2580, April 1999.

[8]  Case, J., Fedor, M., Schoffstall, M., and J. Davin,
     "Simple Network Management Protocol", STD 15, RFC 1157,
     May 1990.

[9]  Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
     "Introduction to Community-based SNMPv2", RFC 1901,
     January 1996.

[10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
     "Transport Mappings for Version 2 of the Simple Network
     Management Protocol (SNMPv2)", RFC 1906, January 1996.

[11] Case, J., Harrington D., Presuhn R., and B. Wijnen,
     "Message Processing and Dispatching for the Simple
     Network Management Protocol (SNMP)", RFC 2572, April
     1999.





Various Authors      Expires Aug 28, 2002           [Page 118]


Internet Draft    Policy-Based Management MIB November 7, 2001


[12] Blumenthal, U., and B. Wijnen, "User-based Security Model
     (USM) for version 3 of the Simple Network Management
     Protocol (SNMPv3)", RFC 2574, April 1999.

[13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
     "Protocol Operations for Version 2 of the Simple Network
     Management Protocol (SNMPv2)", RFC 1905, January 1996.

[14] Levi, D., Meyer, P., and B. Stewart, "SNMPv3
     Applications", RFC 2573, April 1999.

[15] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
     Access Control Model (VACM) for the Simple Network
     Management Protocol (SNMP)", RFC 2575, April 1999.

[16] McCloghrie, K. and M. Rose, Editors, "Management
     Information Base for Network Management of TCP/IP-based
     internets: MIB-II", STD 17, RFC 1213, Hughes LAN Systems,
     Performance Systems International, March 1991.

[17] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
     MIB", RFC 2863, Cisco Systems, Argon Networks, June 2000.

[18] Case, J., Mundy, R., Partain, D., and B. Stewart,
     "Introduction to Version 3 of the Internet-standard
     Network Management Framework", RFC 2570, April 1999.

[19] International Standards Organization, "Information
     Technology - Programming Languages - C++", ISO/IEC
     14882-1998

[20] ECMA, "ECMAScript Language Specification", ECMA-262,
     December 1999

[21] Moore, B., Ellesson, E., Strassner, J., and A.
     Westerinen, "Policy Core Information Model -- Version 1
     Specification", RFC 3060, February 2001.

[22] Dawson, F. and D. Stenerson, "Internet Calendaring and
     Scheduling Core Object Specification (iCalendar)", RFC
     2445, November 1998

[23] Levi, D. and J. Schoenwaelder, "Definitions of Managed
     Objects for Scheduling Management Operations", RFC 3231,
     January 2002





Various Authors      Expires Aug 28, 2002           [Page 119]


Internet Draft    Policy-Based Management MIB November 7, 2001


17.  Intellectual Property

The IETF takes no position regarding the validity or scope of
any intellectual property or other rights that might be
claimed to  pertain to the implementation or use of the
technology described in this document or the extent to which
any license under such rights might or might not be available;
neither does it represent that it has made any effort to
identify any such rights.  Information on the IETF's
procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11.
Copies of claims of rights made available for publication and
any assurances of licenses to be made available, or the result
of an attempt made to obtain a general license or permission
for the use of such proprietary rights by implementors or
users of this specification can be obtained from the IETF
Secretariat.

The IETF invites any interested party to bring to its
attention any copyrights, patents or patent applications, or
other proprietary rights which may cover technology that may
be required to practice this standard.  Please address the
information to the IETF Executive Director.


18.  Full Copyright Statement

Copyright (C) The Internet Society (2001). All Rights Reserved.

This document and translations of it may be copied and
furnished to others, and derivative works that comment on or
otherwise explain it or assist in its implementation may be
prepared, copied, published and distributed, in whole or in
part, without restriction of any kind, provided that the above
copyright notice and this paragraph are included on all such
copies and derivative works.  However, this document itself
may not be modified in any way, such as by removing the
copyright notice or references to the Internet Society or
other Internet organizations, except as needed for the
purpose of developing Internet standards in which case the
procedures for copyrights defined in the Internet Standards
process must be followed, or as required to translate it into
languages other than English.

The limited permissions granted above are perpetual and will





Various Authors      Expires Aug 28, 2002           [Page 120]


Internet Draft    Policy-Based Management MIB November 7, 2001


not be revoked by the Internet Society or its successors or
assigns.

This document and the information contained herein is provided
on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE
USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.

Table of Contents


1 Abstract ..............................................    2
2 The SNMP Management Framework .........................    2
3 Overview ..............................................    4
4 Policy-Based Management Architecture ..................    5
5 Policy Based Management Execution Environment .........   10
5.1 Terminology .........................................   10
5.2 Execution Environment - Elements of Procedure .......   11
5.3 Element Discovery ...................................   11
5.3.1 Implementation Notes ..............................   13
5.4 Element Filtering ...................................   13
5.4.1 Implementation Notes ..............................   14
5.5 Policy Enforcement ..................................   14
5.5.1 Implementation Notes ..............................   14
6 The PolicyScript Language .............................   15
6.1 Formal Definition ...................................   16
6.2 Variables ...........................................   19
6.2.1 The var class .....................................   20
6.3 PolicyScript QuickStart Guide .......................   24
6.3.1 Quickstart for C Programmers ......................   26
6.3.2 Quickstart for Perl Programmers ...................   27
6.3.3 Quickstart for TCL Programmers ....................   27
6.3.4 Quickstart for Python Programmers .................   27
6.3.5   Quickstart  for  JavaScript/ECMAScript/JScript
     Programmers ........................................   27
6.4 PolicyScript script return values ...................   28
7 Index information for `this element' ..................   28
8 Library Functions .....................................   29
9 Base Function Library .................................   30
9.1 SNMP Library Functions ..............................   31
9.1.1 SNMP Operations on Non-Local Systems ..............   32
9.1.2 Form of SNMP Values ...............................   33





Various Authors      Expires Aug 28, 2002           [Page 121]


Internet Draft    Policy-Based Management MIB November 7, 2001


9.1.3 Convenience SNMP Functions ........................   35
9.1.3.1 getVar() ........................................   35
9.1.3.2 exists() ........................................   36
9.1.3.3 setVar() ........................................   36
9.1.3.4 searchColumn() ..................................   37
9.1.3.5 setRowStatus() ..................................   39
9.1.3.6 createRow() .....................................   41
9.1.3.7 counterRate() ...................................   43
9.1.4 General SNMP Functions ............................   45
9.1.4.1 newPDU() ........................................   47
9.1.4.2 writeVar() ......................................   47
9.1.4.3 readVar() .......................................   48
9.1.4.4 snmpSend() ......................................   49
9.1.4.5 readError() .....................................   50
9.1.4.6 writeBulkParameters() ...........................   50
9.2 Constants ...........................................   51
9.3 Policy Library Functions ............................   53
9.3.1 elementName() .....................................   53
9.3.2 elementAddress() ..................................   54
9.3.3 elementContext() ..................................   54
9.3.4 ec() ..............................................   54
9.3.5 ev() ..............................................   54
9.3.6 roleMatch() .......................................   55
9.3.7 Scratchpad Functions ..............................   55
9.3.8 setScratchpad() ...................................   58
9.3.9 getScratchpad() ...................................   59
9.3.10 signalError() ....................................   60
9.3.11 defer() ..........................................   60
9.3.12 fail() ...........................................   61
9.3.13 getParameters() ..................................   62
9.4 Utility Library Functions ...........................   62
9.4.1 regexp() ..........................................   62
9.4.2 regexpReplace() ...................................   63
9.4.3 oidlen() ..........................................   63
9.4.4 oidncmp() .........................................   63
9.4.5 inSubtree() .......................................   64
9.4.6 subid() ...........................................   64
9.4.7 subidWrite() ......................................   64
9.4.8 oidSplice() .......................................   65
9.4.9 parseIndex() ......................................   65
9.4.10 stringToDotted() .................................   67
9.4.11 integer() ........................................   67
9.4.12 string() .........................................   68
9.4.13 type() ...........................................   68
9.4.14 chr() ............................................   68





Various Authors      Expires Aug 28, 2002           [Page 122]


Internet Draft    Policy-Based Management MIB November 7, 2001


9.4.15 ord() ............................................   68
9.4.16 substr() .........................................   68
9.5 General Functions ...................................   69
10 Schedule Table .......................................   69
11 Definitions ..........................................   72
12 Relationship to other MIBs ...........................  115
13 Security Considerations ..............................  115
14 Acknowledgements .....................................  116
15 Author's Addresses ...................................  117
16 References ...........................................  118
17 Intellectual Property ................................  120
18 Full Copyright Statement .............................  120






































Various Authors      Expires Aug 28, 2002           [Page 123]