Network Working Group S. Perreault Internet-Draft Viagenie Obsoletes: 2425, 2426, 4770 P. Resnick (if approved) QUALCOMM Incorporated Updates: 2739 (if approved) June 25, 2008 Intended status: Standards Track Expires: December 27, 2008 vCard Format Specification draft-ietf-vcarddav-vcardrev-02 Status of This Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on December 27, 2008. Copyright Notice Copyright (C) The IETF Trust (2008). Abstract This document defines the vCard data format for representing and exchanging a variety of information about an individual (e.g., formatted and structured name and delivery addresses, email address, multiple telephone numbers, photograph, logo, audio clips, etc.). Perreault & Resnick Expires December 27, 2008 [Page 1]
Internet-Draft vCard June 2008 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. Conventions . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. MIME Type Registration . . . . . . . . . . . . . . . . . . . . 5 4. vCard Format Specification . . . . . . . . . . . . . . . . . . 6 4.1. Line Delimiting and Folding . . . . . . . . . . . . . . . 7 4.2. ABNF Format Definition . . . . . . . . . . . . . . . . . . 8 5. Property Value Data Types . . . . . . . . . . . . . . . . . . 10 5.1. TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.2. URI . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.3. DATE, TIME, and DATE-TIME . . . . . . . . . . . . . . . . 13 5.4. BOOLEAN . . . . . . . . . . . . . . . . . . . . . . . . . 13 5.5. INTEGER . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.6. FLOAT . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.7. BINARY . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.8. UTC-OFFSET . . . . . . . . . . . . . . . . . . . . . . . . 14 6. Property Parameters . . . . . . . . . . . . . . . . . . . . . 15 6.1. LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . 16 6.2. ENCODING . . . . . . . . . . . . . . . . . . . . . . . . . 16 6.3. VALUE . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6.4. PID . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6.5. TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 7. vCard Properties . . . . . . . . . . . . . . . . . . . . . . . 18 7.1. General Properties . . . . . . . . . . . . . . . . . . . . 18 7.1.1. BEGIN . . . . . . . . . . . . . . . . . . . . . . . . 18 7.1.2. END . . . . . . . . . . . . . . . . . . . . . . . . . 18 7.1.3. SOURCE . . . . . . . . . . . . . . . . . . . . . . . . 19 7.1.4. NAME . . . . . . . . . . . . . . . . . . . . . . . . . 19 7.1.5. KIND . . . . . . . . . . . . . . . . . . . . . . . . . 20 7.2. Identification Properties . . . . . . . . . . . . . . . . 21 7.2.1. FN . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.2.2. N . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.2.3. NICKNAME . . . . . . . . . . . . . . . . . . . . . . . 22 7.2.4. PHOTO . . . . . . . . . . . . . . . . . . . . . . . . 22 7.2.5. BDAY . . . . . . . . . . . . . . . . . . . . . . . . . 23 7.2.6. DDAY . . . . . . . . . . . . . . . . . . . . . . . . . 23 7.2.7. BIRTH . . . . . . . . . . . . . . . . . . . . . . . . 23 7.2.8. DEATH . . . . . . . . . . . . . . . . . . . . . . . . 23 7.2.9. GENDER . . . . . . . . . . . . . . . . . . . . . . . . 24 7.3. Delivery Addressing Properties . . . . . . . . . . . . . . 24 7.3.1. ADR . . . . . . . . . . . . . . . . . . . . . . . . . 24 7.3.2. LABEL . . . . . . . . . . . . . . . . . . . . . . . . 25 7.4. Communications Properties . . . . . . . . . . . . . . . . 25 7.4.1. TEL . . . . . . . . . . . . . . . . . . . . . . . . . 25 7.4.2. EMAIL . . . . . . . . . . . . . . . . . . . . . . . . 26 7.4.3. IMPP . . . . . . . . . . . . . . . . . . . . . . . . . 27 7.4.4. LANG . . . . . . . . . . . . . . . . . . . . . . . . . 27 Perreault & Resnick Expires December 27, 2008 [Page 2]
Internet-Draft vCard June 2008 7.5. Geographical Properties . . . . . . . . . . . . . . . . . 28 7.5.1. TZ . . . . . . . . . . . . . . . . . . . . . . . . . . 28 7.5.2. GEO . . . . . . . . . . . . . . . . . . . . . . . . . 28 7.6. Organizational Properties . . . . . . . . . . . . . . . . 29 7.6.1. TITLE . . . . . . . . . . . . . . . . . . . . . . . . 29 7.6.2. ROLE . . . . . . . . . . . . . . . . . . . . . . . . . 29 7.6.3. LOGO . . . . . . . . . . . . . . . . . . . . . . . . . 30 7.6.4. AGENT . . . . . . . . . . . . . . . . . . . . . . . . 30 7.6.5. ORG . . . . . . . . . . . . . . . . . . . . . . . . . 31 7.6.6. MEMBER . . . . . . . . . . . . . . . . . . . . . . . . 31 7.6.7. RELATED . . . . . . . . . . . . . . . . . . . . . . . 32 7.7. Explanatory Properties . . . . . . . . . . . . . . . . . . 33 7.7.1. CATEGORIES . . . . . . . . . . . . . . . . . . . . . . 33 7.7.2. NOTE . . . . . . . . . . . . . . . . . . . . . . . . . 33 7.7.3. PRODID . . . . . . . . . . . . . . . . . . . . . . . . 34 7.7.4. REV . . . . . . . . . . . . . . . . . . . . . . . . . 34 7.7.5. SORT-STRING . . . . . . . . . . . . . . . . . . . . . 34 7.7.6. SOUND . . . . . . . . . . . . . . . . . . . . . . . . 35 7.7.7. UID . . . . . . . . . . . . . . . . . . . . . . . . . 36 7.7.8. URL . . . . . . . . . . . . . . . . . . . . . . . . . 36 7.7.9. VERSION . . . . . . . . . . . . . . . . . . . . . . . 36 7.8. Security Properties . . . . . . . . . . . . . . . . . . . 37 7.8.1. CLASS . . . . . . . . . . . . . . . . . . . . . . . . 37 7.8.2. KEY . . . . . . . . . . . . . . . . . . . . . . . . . 37 7.9. Calendar Properties . . . . . . . . . . . . . . . . . . . 38 7.9.1. FBURL . . . . . . . . . . . . . . . . . . . . . . . . 38 7.9.2. CALADRURI . . . . . . . . . . . . . . . . . . . . . . 39 7.9.3. CALURI . . . . . . . . . . . . . . . . . . . . . . . . 39 7.10. Extended Properties and Parameters . . . . . . . . . . . . 39 8. Synchronization . . . . . . . . . . . . . . . . . . . . . . . 39 8.1. Mechanisms . . . . . . . . . . . . . . . . . . . . . . . . 40 8.2. Example . . . . . . . . . . . . . . . . . . . . . . . . . 40 9. Formal Grammar . . . . . . . . . . . . . . . . . . . . . . . . 41 10. Example: Authors' vCards . . . . . . . . . . . . . . . . . . . 50 11. Security Considerations . . . . . . . . . . . . . . . . . . . 50 12. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 51 12.1. Registering New vCard Elements . . . . . . . . . . . . . . 51 12.1.1. Registration Procedure . . . . . . . . . . . . . . . . 51 12.1.2. Vendor Namespace . . . . . . . . . . . . . . . . . . . 52 12.1.3. Registration Template for Properties . . . . . . . . . 52 12.1.4. Registration Template for Parameters . . . . . . . . . 53 12.1.5. Registration Template for Value Data Types . . . . . . 53 12.1.6. Registration Template for Values . . . . . . . . . . . 54 12.2. Initial vCard Elements Registries . . . . . . . . . . . . 54 12.2.1. Properties Registry . . . . . . . . . . . . . . . . . 54 12.2.2. Parameters Registry . . . . . . . . . . . . . . . . . 56 12.2.3. Value Data Types Registry . . . . . . . . . . . . . . 56 13. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 56 Perreault & Resnick Expires December 27, 2008 [Page 3]
Internet-Draft vCard June 2008 14. References . . . . . . . . . . . . . . . . . . . . . . . . . . 57 14.1. Normative References . . . . . . . . . . . . . . . . . . . 57 14.2. Informative References . . . . . . . . . . . . . . . . . . 59 Appendix A. Differences from RFCs 2425 and 2426 . . . . . . . . . 59 A.1. New Structure . . . . . . . . . . . . . . . . . . . . . . 59 A.2. Removed Features . . . . . . . . . . . . . . . . . . . . . 60 A.3. New Properties and Parameters . . . . . . . . . . . . . . 60 A.4. Other Changes . . . . . . . . . . . . . . . . . . . . . . 60 Appendix B. Change Log (to be removed by RFC Editor prior to publication) . . . . . . . . . . . . . . . . . . . . 60 B.1. Changes in -02 . . . . . . . . . . . . . . . . . . . . . . 60 B.2. Changes in -01 . . . . . . . . . . . . . . . . . . . . . . 61 B.3. Changes in -00 . . . . . . . . . . . . . . . . . . . . . . 62 Perreault & Resnick Expires December 27, 2008 [Page 4]
Internet-Draft vCard June 2008 1. Introduction Note: This draft contains much of the same text as 2425 and 2426 which may not be correct. Those two RFCs have been merged and the structure of this draft is what's new. Some vCard-specific suggestions have been added, but for the most part this is still very open. But we'd like to get feedback on the structure mostly so that it may be fixed. Electronic address books have become ubiquitous. Their increased presense on portable, connected devices as well as the diversity of platforms exchanging contact data call for a standard. This memo defines the vCard format, which allows the capture and exchange of information normally stored within an address book or directory application. 2. Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. MIME Type Registration To: ietf-types@iana.org Subject: Registration of media type text/vcard Type name: text Subtype name: vcard Required parameters: none Optional parameters: charset Encoding considerations: The "charset" MIME parameter is interpreted as defined in [RFC2046], section 4.1.2. If it is omitted, the default encoding is UTF-8 as defined in [RFC3629]. Security considerations: See Section 11. Interoperability considerations: The text/vcard media type is intended to identify vCard data of any version. There are older specifications of vCard [RFC2426][oldreference_VCARD] still in common use. While these formats are similar, they are not strictly compatible. In general, it is necessary to inspect the value of the VERSION property (see Section 7.7.9) for identifying Perreault & Resnick Expires December 27, 2008 [Page 5]
Internet-Draft vCard June 2008 the standard to which a given vCard object conforms. In addition, the following media types are known to have been used to refer to vCard data. They should be considered deprecated in favor of text/vcard. * text/directory * text/directory; type=vcard * text/x-vcard Published specification: draft-ietf-vcarddav-vcardrev-02 Applications that use this media type: They are numerous, diverse, and include mail user agents, instant messaging clients, address book applications, directory servers, customer relationship management software, etc. Additional information: Magic number(s): File extension(s): .vcf Macintosh file type code(s): Person & email address to contact for further information: Simon Perreault <simon.perreault@viagenie.ca> Intended usage: COMMON Restrictions on usage: none Author: Simon Perreault and Pete Resnick Change controller: IETF 4. vCard Format Specification The text/vcard MIME content type (hereafter known as "vCard") contains contact information, typically pertaining to a single contact or group of contacts. The content consists of one or more lines in the format given below. Perreault & Resnick Expires December 27, 2008 [Page 6]
Internet-Draft vCard June 2008 4.1. Line Delimiting and Folding Individual lines within vCard are delimited by the [RFC2822] line break, which is a CRLF sequence (ASCII decimal 13, followed by ASCII decimal 10). Long logical lines of text can be split into a multiple-physical-line representation using the following folding technique. Content lines SHOULD be folded to a maximum width of 75 octets. Multi-octet characters MUST remain contiguous. The rationale for this folding process can be found in [RFC2822], Section 2.1.1. A logical line MAY be continued on the next physical line anywhere between two characters by inserting a CRLF immediately followed by a single white space character (space, ASCII decimal 32, or horizontal tab, ASCII decimal 9). At least one character must be present on the folded line. Any sequence of CRLF followed immediately by a single white space character is ignored (removed) when processing the content type. For example the line: DESCRIPTION:This is a long description that exists on a long line. can be represented as: DESCRIPTION:This is a long description that exists on a long line. It could also be represented as: DESCRIPTION:This is a long descrip tion that exists o n a long line. The process of moving from this folded multiple-line representation of a property definition to its single line representation is called unfolding. Unfolding is accomplished by regarding CRLF immediately followed by a white space character (namely HTAB ASCII decimal 9 or SPACE ASCII decimal 32) as equivalent to no characters at all (i.e., the CRLF and single white space character are removed). Note: It is possible for very simple implementations to generate improperly folded lines in the middle of a UTF-8 multi-octet sequence. For this reason, implementations SHOULD unfold lines in such a way as to properly restore the original sequence. Folding is done after any content encoding of a type value. Unfolding is done before any decoding of a type value in a content line. Perreault & Resnick Expires December 27, 2008 [Page 7]
Internet-Draft vCard June 2008 4.2. ABNF Format Definition The following ABNF uses the notation of [RFC5234], which also defines CRLF, WSP, DQUOTE, VCHAR, ALPHA, and DIGIT. After the unfolding of any folded lines as described above, the syntax for a line of this content type is as follows: Perreault & Resnick Expires December 27, 2008 [Page 8]
Internet-Draft vCard June 2008 contentline = name *(";" param) ":" value CRLF ; When parsing a content line, folded lines MUST first ; be unfolded according to the unfolding procedure ; described above. ; When generating a content line, lines longer than 75 ; characters SHOULD be folded according to the folding ; procedure described above. name = x-name / iana-token iana-token = 1*(ALPHA / DIGIT / "-") ; identifier registered with IANA x-name = "x-" 1*(ALPHA / DIGIT / "-") ; Names that begin with "x-" or "X-" are ; reserved for experimental use, not intended for released ; products, or for use in bilateral agreements. param = param-name "=" param-value *("," param-value) param-name = x-name / iana-token param-value = ptext / quoted-string ptext = *SAFE-CHAR value = *VALUE-CHAR / valuespec ; valuespec defined in section 5.8.4 quoted-string = DQUOTE *QSAFE-CHAR DQUOTE NON-ASCII = %x80-FF ; use restricted by charset parameter ; on outer MIME object (UTF-8 preferred) QSAFE-CHAR = WSP / %x21 / %x23-7E / NON-ASCII ; Any character except CTLs, DQUOTE SAFE-CHAR = WSP / %x21 / %x23-2B / %x2D-39 / %x3C-7E / NON-ASCII ; Any character except CTLs, DQUOTE, ";", ":", "," VALUE-CHAR = WSP / VCHAR / NON-ASCII ; any textual character A line that begins with a white space character is a continuation of the previous line, as described above. The white space character and immediately preceeding CRLF should be discarded when reconstructing the original line. Note that this line-folding convention differs Perreault & Resnick Expires December 27, 2008 [Page 9]
Internet-Draft vCard June 2008 from that found in [RFC2822], in that the sequence <CRLF><WSP> found anywhere in the content indicates a continued line and should be removed. Property names and parameter names are case insensitive (e.g., the property name "fn" is the same as "FN" and "Fn"). Parameter values MAY be case sensitive or case insensitive, depending on their definition. Each property defined in a vCard instance MAY have multiple values. The general rule for encoding multi-valued properties is to simply create a new content line for each value (including the property name). However, it should be noted that some value types support encoding multiple values in a single content line by separating the values with a comma ",". This approach has been taken for several of the content types defined below (date, time, integer, float), for space-saving reasons. 5. Property Value Data Types Lists of values are delimited by a list delimiter, specified by the COMMA character (ASCII decimal 44). A COMMA character in a value MUST be escaped with a BACKSLASH character (ASCII decimal 92). Compound type values are delimited by a field delimiter, specified by the SEMI-COLON character (ASCII decimal 59). A SEMI-COLON in a component of a compound property value MUST be escaped with a BACKSLASH character (ASCII decimal 92). Standard value types are defined below. valuespec = text-list / URI ; from Appendix A of [RFC3986] / date-list / time-list / date-time-list / boolean / integer-list / float-list / binary / utc-offset / iana-valuespec text-list = *TEXT-LIST-CHAR *("," *TEXT-LIST-CHAR) TEXT-LIST-CHAR = "\\" / "\," / "\n" / <any VALUE-CHAR except , or \ or newline> ; Backslashes, newlines, and commas must be encoded. Perreault & Resnick Expires December 27, 2008 [Page 10]
Internet-Draft vCard June 2008 ; \n or \N can be used to encode a newline. date-list = date *("," date) time-list = time *("," time) date-time-list = date "T" time *("," date "T" time) boolean = "TRUE" / "FALSE" integer-list = integer *("," integer) integer = [sign] 1*DIGIT float-list = float *("," float) float = [sign] 1*DIGIT ["." 1*DIGIT] sign = "+" / "-" binary = <A "B" binary encoded string as defined by [RFC2047].> date = date-fullyear ["-" date-month ["-" date-mday]] date-fullyear = 4DIGIT date-month = 2DIGIT ;01-12 date-mday = 2DIGIT ;01-28, 01-29, 01-30, 01-31 ;based on month/year time = time-hour [":" time-minute [":" time-second [time-secfrac]]] [time-zone] time-hour = 2DIGIT ;00-23 time-minute = 2DIGIT ;00-59 time-second = 2DIGIT ;00-60 (leap second) time-secfrac = "," 1*DIGIT time-zone = "Z" / time-numzone time-numzome = sign time-hour [":"] time-minute utc-offset = ("+" / "-") time-hour ":" time-minute Perreault & Resnick Expires December 27, 2008 [Page 11]
Internet-Draft vCard June 2008 iana-valuespec = <a publicly-defined valuetype format, registered with IANA, as defined in section 12 of this document> 5.1. TEXT "text": The "text" value type should be used to identify values that contain human-readable text. The character set in which the text is represented is controlled by the "charset" MIME type parameter. Note that there is no way to override this parameter on a per-property basis. As for the language, it is controlled by the "language" property parameter defined in Section 6.1. Examples for "text": this is a text value this is one value,this is another this is a single value\, with a comma encoded A formatted text line break in a text value type MUST be represented as the character sequence backslash (ASCII decimal 92) followed by a Latin small letter n (ASCII decimal 110) or a Latin capital letter N (ASCII decimal 78), that is "\n" or "\N". For example a multiple line DESCRIPTION value of: Mythical Manager Hyjinx Software Division BabsCo, Inc. could be represented as: DESCRIPTION:Mythical Manager\nHyjinx Software Division\n BabsCo\, Inc.\n demonstrating the \n literal formatted line break technique, the CRLF-followed-by-space line folding technique, and the backslash escape technique. 5.2. URI "uri": The "uri" value type should be used to identify values that are referenced by a URI (including a Content-ID URI), instead of encoded in-line. These value references might be used if the value is too large, or otherwise undesirable to include directly. The format for the URI is as defined in [RFC3986]. Note that the value of a property of type "uri" is what the URI points to, not the URI itself. Perreault & Resnick Expires December 27, 2008 [Page 12]
Internet-Draft vCard June 2008 Examples for "uri": http://www.example.com/my/picture.jpg ldap://ldap.example.com/cn=babs%20jensen 5.3. DATE, TIME, and DATE-TIME "date", "time", and "date-time": Each of these value types is based on a subset of the definitions in [ISO.8601.1988] standard. Multiple "date" and "time" values can be specified using the comma-separated notation. Examples for "date": 1985-04-12 1996-08-05,1996-11-11 19850412 Examples for "time": 10:22:00 102200 10:22:00.33 10:22:00.33Z 10:22:33,11:22:00 10:22:00-08:00 Examples for "date-time": 1996-10-22T14:00:00Z 1996-08-11T12:34:56Z 19960811T123456Z 1996-10-22T14:00:00Z,1996-08-11T12:34:56Z 5.4. BOOLEAN "boolean": The "boolean" value type is used to express boolen values. These values are case insensitive. Examples: TRUE false True Perreault & Resnick Expires December 27, 2008 [Page 13]
Internet-Draft vCard June 2008 5.5. INTEGER "integer": The "integer" value type is used to express signed integers in decimal format. If sign is not specified, the value is assumed positive "+". Multiple "integer" values can be specified using the comma-separated notation. Examples: 1234567890 -1234556790 +1234556790,432109876 5.6. FLOAT "float": The "float" value type is used to express real numbers. If sign is not specified, the value is assumed positive "+". Multiple "float" values can be specified using the comma-separated notation. Examples: 20.30 1000000.0000001 1.333,3.14 5.7. BINARY "binary": The "binary" value type specifies that the type value is inline, encoded binary data. This value type can be specified in the PHOTO, LOGO, SOUND, and KEY types. If inline encoded binary data is specified, the ENCODING type parameter MUST be used to specify the encoding format. The binary data MUST be encoded using the "B" encoding format. Long lines of encoded binary data SHOULD BE folded to 75 characters using the folding method defined in Section 4.1. 5.8. UTC-OFFSET "utc-offset": The "utc-offset" value type specifies that the type value is a signed offset from UTC. This value type can be specified in the TZ type. The value type is an offset from Coordinated Universal Time (UTC). It is specified as a positive or negative difference in units of hours and minutes (e.g., +hh:mm). The time is specified as a 24-hour clock. Hour values are from 00 to 23, and minute values are from 00 to 59. Hour and minutes are 2-digits with high order zeroes required Perreault & Resnick Expires December 27, 2008 [Page 14]
Internet-Draft vCard June 2008 to maintain digit count. The extended format for ISO 8601 UTC offsets MUST be used. The extended format makes use of a colon character as a separator of the hour and minute text fields. 6. Property Parameters A property can have attributes associated with it. These "property parameters" contain meta-information about the property or the property value. Property parameter values that contain the COLON (US-ASCII decimal 58), SEMICOLON (US-ASCII decimal 59) or COMMA (US-ASCII decimal 44) character separators MUST be specified as quoted-string text values. Property parameter values MUST NOT contain the DQUOTE (US-ASCII decimal 22) character. The DQUOTE (US-ASCII decimal 22) character is used as a delimiter for parameter values that contain restricted characters or URI text. For example: FN;PID=8:Jane Doe Property parameter values that are not in quoted strings are case insensitive. The general property parameters defined by this memo are defined by the following notation: Perreault & Resnick Expires December 27, 2008 [Page 15]
Internet-Draft vCard June 2008 vcardparameter = encodingparam / valuetypeparam / languageparam / uidparam encodingparam = "encoding" "=" encodingtype encodingtype = "b" ; from [RFC2047] / iana-token ; registered as described in ; section 12 of this document valuetypeparam = "value" "=" valuetype valuetype = "uri" ; URI from Appendix A of [RFC3986] / "text" / "date" / "time" / "date-time" ; date time / "integer" / "boolean" / "float" / x-name / iana-token ; registered as described in ; section 12 of this document languageparam = "language" "=" Language-Tag ; Language-Tag is defined in section 2.1 of RFC 4646 uidparam = "uid" "=" URI ; from Appendix A of [RFC3986] Applications MUST ignore x-param and iana-param value they don't recognize. 6.1. LANGUAGE The "language" property parameter is used to identify data in multiple languages. There is no concept of "default" language, except as specified by any "Content-Language" MIME header parameter that is present. The value of the "language" property parameter is a language tag as defined in Section 2 of [RFC4646]. 6.2. ENCODING The "encoding" property parameter is used to specify an alternate encoding for a value. If the value contains a CRLF, it must be encoded, since CRLF is used to separate lines in the content-type itself. Currently, only the "b" encoding is supported. Perreault & Resnick Expires December 27, 2008 [Page 16]
Internet-Draft vCard June 2008 The "b" encoding can also be useful for binary values that are mixed with other text information in the body part (e.g., a certificate). Using a per-value "b" encoding in this case leaves the other information in a more readable form. The encoded base 64 value can be split across multiple physical lines by using the line folding technique described above. The Content-Transfer-Encoding header field is used to specify the encoding used for the body part as a whole. The "encoding" property parameter is used to specify an encoding for a particular value (e.g., a certificate). In this case, the Content-Transfer-Encoding header might specify "8bit", while the one certificate value might specify an encoding of "b" via an "encoding=b" property parameter. The Content-Transfer-Encoding and the encodings of individual properties given by the "encoding" property parameter are independent of one another. When encoding a text/vcard body part for transmission, individual property encodings are performed first, then the entire body part is encoded according to the Content-Transfer- Encoding. When decoding a text/vcard body part, the Content- Transfer-Encoding is decoded first, and then any individual properties with an "encoding" property parameter are decoded. 6.3. VALUE The "value" parameter is optional, and is used to identify the value type (data type) and format of the value. The use of these predefined formats is encouraged even if the value parameter is not explicity used. By defining a standard set of value types and their formats, existing parsing and processing code can be leveraged. The predefined data type values MUST NOT be repeated in COMMA separated value lists except within the N, NICKNAME, ADR and CATEGORIES properties. Including the value type explicitly as part of each property provides an extra hint to keep parsing simple and support more generalized applications. For example a search engine would not have to know the particular value types for all of the items for which it is searching. Because the value type is explicit in the definition, the search engine could look for dates in any item type and provide results that can still be interpreted. 6.4. PID The "pid" parameter is used to uniquely identify the property. It plays a role analogous to the UID property (Section 7.7.7) on a per- property instead of per-vCard basis. It MUST NOT appear more than once in a given property, and SHOULD be present if synchronization is Perreault & Resnick Expires December 27, 2008 [Page 17]
Internet-Draft vCard June 2008 to be used. See Section 8. Its value is a small integer. 6.5. TYPE The "type" parameter has multiple, different uses. In general, it is a way of specifying class characteristics of the associated property. Most of the time, its value is a comma-separated subset of a pre- defined enumeration. In this document, the following properties make use of this parameter: PHOTO, ADR, LABEL, TEL, EMAIL, IMPP, LOGO, MEMBER, SOUND, and KEY. 7. vCard Properties What follows is an enumeration of the standard vCard properties. 7.1. General Properties 7.1.1. BEGIN Purpose: To denote the beginning of a syntactic entity within a text/vcard content-type. Value type: text Special notes: The content entity MUST begin with the BEGIN property with a value of "VCARD". The BEGIN property is used in conjunction with the END property to delimit an entity containing a related set of properties within an text/vcard content-type. This construct can be used instead of or in addition to wrapping separate sets of information inside additional MIME headers. It is provided for applications that wish to define content that can contain multiple entities within the same text/vcard content-type or to define content that can be identifiable outside of a MIME environment. Example: BEGIN:VCARD 7.1.2. END Purpose: To denote the end of a syntactic entity within a text/vcard content-type. Perreault & Resnick Expires December 27, 2008 [Page 18]
Internet-Draft vCard June 2008 Value type: text Special notes: The content entity MUST end with the END type with a value of "VCARD". The END property is used in conjunction with the BEGIN property to delimit an entity containing a related set of properties within an text/vcard content-type. This construct can be used instead of or in addition to wrapping separate sets of information inside additional MIME headers. It is provided for applications that wish to define content that can contain multiple entities within the same text/vcard content-type or to define content that can be identifiable outside of a MIME environment. Example: END:VCARD 7.1.3. SOURCE Purpose: To identify the source of directory information contained in the content type. Value type: uri Special notes: The SOURCE property is used to provide the means by which applications knowledgable in the given directory service protocol can obtain additional or more up-to-date information from the directory service. It contains a URI as defined in [RFC3986] and/or other information referencing the vCard to which the information pertains. When directory information is available from more than one source, the sending entity can pick what it considers to be the best source, or multiple SOURCE properties can be included. Examples: SOURCE:ldap://ldap.example.com/cn=Babs%20Jensen,%20o=Babsco,%20c=US SOURCE:http://directory.example.com/addressbooks/jdoe/ Jean%20Dupont.vcf 7.1.4. NAME Perreault & Resnick Expires December 27, 2008 [Page 19]
Internet-Draft vCard June 2008 Purpose: To identify the displayable name of the directory entity to which information in the vCard pertains. Value type: text Special notes: The NAME property is used to convey the display name of the entity to which the directory information pertains. Its value is the displayable, presentation text associated with the source for the vCard, as specified in the SOURCE property. Example: NAME:Babs Jensen's Contact Information 7.1.5. KIND Purpose: To specify the kind of object the vCard represents. Value type: A single text value. Special notes: The value may be one of: "individual" for a single person, "group" for a group of people, "org" for an organization, an x-name or an iana-token. If this property is absent, "individual" MUST be assumed as default. Example: This represents someone named Jane Doe working in the marketing department of the North American division of ABC Inc. BEGIN:VCARD VERSION:4.0 KIND:individual FN:Jane Doe ORG:ABC\, Inc.;North American Division;Marketing END:VCARD This represents the department itself, commonly known as ABC Marketing. BEGIN:VCARD VERSION:4.0 KIND:org FN:ABC Marketing ORG:ABC\, Inc.;North American Division;Marketing END:VCARD Perreault & Resnick Expires December 27, 2008 [Page 20]
Internet-Draft vCard June 2008 7.2. Identification Properties These types are used to capture information associated with the identification and naming of the person or resource associated with the vCard. 7.2.1. FN Purpose: To specify the formatted text corresponding to the name of the object the vCard represents. Value type: A single text value. Special notes: This property is based on the semantics of the X.520 Common Name attribute. The property MUST be present in the vCard object. Example: FN:Mr. John Q. Public\, Esq. 7.2.2. N Purpose: To specify the components of the name of the object the vCard represents. Value type: A single structured text value. Each component can have multiple values. Special note: The structured property value corresponds, in sequence, to the Family Name, Given Name, Additional Names, Honorific Prefixes, and Honorific Suffixes. The text components are separated by the SEMI-COLON character (ASCII decimal 59). Individual text components can include multiple text values (e.g., multiple Additional Names) separated by the COMMA character (ASCII decimal 44). This property is based on the semantics of the X.520 individual name attributes. The property SHOULD be present in the vCard object when the name of the object the vCard represents follows the X.520 model. Examples: N:Public;John;Quinlan;Mr.;Esq. N:Stevenson;John;Philip,Paul;Dr.;Jr.,M.D.,A.C.P. Perreault & Resnick Expires December 27, 2008 [Page 21]
Internet-Draft vCard June 2008 7.2.3. NICKNAME Purpose: To specify the text corresponding to the nickname of the object the vCard represents. Value type: One or more text values separated by a COMMA character (ASCII decimal 44). Special note: The nickname is the descriptive name given instead of or in addition to the one belonging to a person, place, or thing. It can also be used to specify a familiar form of a proper name specified by the FN or N properties. Examples: NICKNAME:Robbie NICKNAME:Jim,Jimmie 7.2.4. PHOTO Purpose: To specify an image or photograph information that annotates some aspect of the object the vCard represents. Encoding: The encoding MUST be reset to "b" using the ENCODING parameter in order to specify inline, encoded binary data. If the value is referenced by a URI value, then the default encoding is used and no explicit ENCODING parameter is needed. Value type: A single value. The default is binary value. It can also be reset to uri value. The uri value can be used to specify a value outside of this MIME entity. Special notes: This property SHOULD include the parameter "TYPE" to specify the graphic image format type. The TYPE parameter value MUST be an image media type as specified in [RFC4288]. The full media type name, including the "image/" prefix, should be used. However, implementations SHOULD be able to handle bare subtypes. Example: PHOTO;VALUE=uri:http://www.example.com/pub/photos /jqpublic.gif PHOTO;ENCODING=b;TYPE=image/jpeg:MIICajCCAdOgAwIBAgICBEUwDQYJKo ZIhvcNAQEEBQAwdzELMAkGA1UEBhMCVVMxLDAqBgNVBAoTI05ldHNjYXBlIENv bW11bmljYXRpb25zIENvcnBvcmF0aW9uMRwwGgYDVQQLExNJbmZvcm1hdGlvbi Perreault & Resnick Expires December 27, 2008 [Page 22]
Internet-Draft vCard June 2008 <...remainder of "B" encoded binary data...> 7.2.5. BDAY Purpose: To specify the birth date of the object the vCard represents. Value type: The default is a single date value. It can also be reset to a single date-time or text value. Examples: BDAY:1996-04-15 BDAY:1953-10-15T23:10:00Z BDAY;VALUE=text:circa 1800 7.2.6. DDAY Purpose: To specify the date of death of the object the vCard represents. Value type: The default is a single date value. It can also be reset to a single date-time or text value. 7.2.7. BIRTH Purpose: To specify the place of birth of the object the vCard represents. Value type: A single text value. Example: BIRTH:Babies'R'Us Hospital 7.2.8. DEATH Purpose: To specify the place of death of the object the vCard represents. Value type: A single text value. Example: DEATH:Aboard the Titanic\, near Newfoundland Perreault & Resnick Expires December 27, 2008 [Page 23]
Internet-Draft vCard June 2008 7.2.9. GENDER Purpose: To specify the gender of the object the vCard represents. Value type: A single text value. Special notes: The value "M" stands for male while "F" stands for female. Example: GENDER:F 7.3. Delivery Addressing Properties These types are concerned with information related to the delivery addressing or label for the vCard object. 7.3.1. ADR Purpose: To specify the components of the delivery address for the vCard object. Value type: A single structured text value, separated by the SEMI- COLON character (ASCII decimal 59). Special notes: The structured type value consists of a sequence of address components. The component values MUST be specified in their corresponding position. The structured type value corresponds, in sequence, to the post office box; the extended address (e.g. apartment or suite number); the street address; the locality (e.g., city); the region (e.g., state or province); the postal code; the country name. When a component value is missing, the associated component separator MUST still be specified. The text components are separated by the SEMI-COLON character (ASCII decimal 59). Where it makes semantic sense, individual text components can include multiple text values (e.g., a "street" component with multiple lines) separated by the COMMA character (ASCII decimal 44). The type can include the type parameter "TYPE" to specify the delivery address type. The TYPE parameter values can include "home" to indicate a delivery address for a residence; "work" to indicate delivery address for a place of work; and "pref" to indicate the preferred delivery address when more than one address is specified. These type parameter values can be specified as a parameter list (i.e., "TYPE=home;TYPE=pref") or as a value list Perreault & Resnick Expires December 27, 2008 [Page 24]
Internet-Draft vCard June 2008 (i.e., "TYPE=home,pref"). This type is based on semantics of the X.520 geographical and postal addressing attributes. The default is "TYPE=work". Example: In this example the post office box and the extended address are absent. ADR;TYPE=home:;;123 Main Street;Any Town;CA;91921-1234 7.3.2. LABEL Purpose: To specify the formatted text corresponding to delivery address of the object the vCard represents. Value type: A single text value. Special notes: The property value is formatted text that can be used to present a delivery address label for the vCard object. The type can include the type parameter "TYPE" to specify delivery label type. The TYPE parameter values can include "home" to indicate a delivery label for a residence; "work" to indicate delivery label for a place of work; and "pref" to indicate the preferred delivery label when more than one label is specified. These type parameter values can be specified as a parameter list (i.e., "TYPE=home;TYPE=pref") or as a value list (i.e., "TYPE=home,pref"). The default is "TYPE=work". Example: A multi-line address label. LABEL;TYPE=home:Mr.John Q. Public\, Esq.\nMail Drop: TNE QB\n 123 Main Street\nAny Town\, CA 91921-1234\nU.S.A. 7.4. Communications Properties These properties are concerned with information associated with the way communications with the object the vCard represents are carried out. 7.4.1. TEL Purpose: To specify the telephone number for telephony communication with the object the vCard represents. Value type: A single URI value. It is expected that the URI scheme will be "tel", as specified in [RFC3966], but other schemes MAY be used. Perreault & Resnick Expires December 27, 2008 [Page 25]
Internet-Draft vCard June 2008 Special notes: This property is based on the X.520 Telephone Number attribute. The property can include the parameter "TYPE" to specify intended use for the telephone number. The TYPE parameter values can include: "home" to indicate a telephone number associated with a residence, "msg" to indicate the telephone number has voice messaging support, "work" to indicate a telephone number associated with a place of work, "pref" to indicate a preferred- use telephone number, "voice" to indicate a voice telephone number, "fax" to indicate a facsimile telephone number, "cell" to indicate a cellular telephone number, "video" to indicate a video conferencing telephone number, "pager" to indicate a paging device telephone number, "bbs" to indicate a bulletin board system telephone number, "modem" to indicate a MODEM connected telephone number, "car" to indicate a car-phone telephone number, "isdn" to indicate an ISDN service telephone number, "pcs" to indicate a personal communication services telephone number. The default type is "voice". These type parameter values can be specified as a parameter list (i.e., "TYPE=work;TYPE=voice") or as a value list (i.e., "TYPE=work,voice"). The default can be overridden to another set of values by specifying one or more alternate values. For example, the default TYPE of "voice" can be reset to a WORK and HOME, VOICE and FAX telephone number by the value list "TYPE=work,home,voice,fax". Example: TEL;TYPE=work,voice,pref,msg:tel:+1-555-555-5555;ext=5555 TEL;TYPE=home:tel:+33-01-23-45-67 7.4.2. EMAIL Purpose: To specify the electronic mail address for communication with the object the vCard represents. Value type: A single text value. Special notes: The type can include the type parameter "TYPE" to specify the format or preference of the electronic mail address. The TYPE parameter values can include: "internet" to indicate an Internet addressing type, "x400" to indicate a X.400 addressing type, "uri" to indicate a URI useable for electronic communication, "home" to indicate an address associated with a residence, "work" to indicate an address associated with a place of work, or "pref" to indicate a preferred-use email address when more than one is specified. Another IANA registered address type can also be specified. The default email type is "internet". A Perreault & Resnick Expires December 27, 2008 [Page 26]
Internet-Draft vCard June 2008 non-standard value can also be specified. Type example: EMAIL;TYPE=internet:jqpublic@xyz.example.com EMAIL;TYPE=internet,pref:jane_doe@example.com EMAIL;TYPE=uri,work:http://example.com/contact.php 7.4.3. IMPP Purpose: To specify the URI for instant messaging and presence protocol communications with the object the vCard represents. Value type: A single URI. Special notes: The property may include the type parameter "TYPE" to specify an intended use for the URI. The TYPE parameter values include one or more of the following: * An indication of the type of communication for which this URI is appropriate. This can be a value of "personal" or "business". * An indication of the location of a device associated with this URI. Values can be "home", "work", or "mobile". * The value "pref" indicates this is a preferred address and has the same semantics as the "pref" value in a TEL property. Example: IMPP;TYPE=personal,pref:xmpp:alice@example.com 7.4.4. LANG Purpose: To specify the language(s) that may be used for contacting the individual associated with the vCard. Value type: A list of text values. Special notes: The list is to be interpreted as defined in [RFC2616], Section 14.4, i.e. as the value of an Accept-Language HTTP header. This lets one specify preference among languages. Note that any SEMI-COLON character (ASCII decimal 59) must be escaped. Perreault & Resnick Expires December 27, 2008 [Page 27]
Internet-Draft vCard June 2008 Example: LANG:fr,en\;q=0.9 7.5. Geographical Properties These properties are concerned with information associated with geographical positions or regions associated with the object the vCard represents. 7.5.1. TZ Purpose: To specify information related to the time zone of the object the vCard represents. Value type: The default is a single utc-offset value. It can also be reset to a single text value. Special notes: The type value consists of a single value. Type examples: TZ:-05:00 TZ;VALUE=text:-05:00; EST; Raleigh/North America ;This example has a single value, not a structure text value. 7.5.2. GEO Purpose: To specify information related to the global positioning of the object the vCard represents. Value type: A single structured value consisting of two float values separated by the SEMI-COLON character (ASCII decimal 59). Special notes: This property specifies information related to the global position of the object associated with the vCard. The value specifies latitude and longitude, in that order (i.e., "LAT LON" ordering). The longitude represents the location east and west of the prime meridian as a positive or negative real number, respectively. The latitude represents the location north and south of the equator as a positive or negative real number, respectively. The longitude and latitude values MUST be expressed in the [WGS84] reference system. They MUST be specified as decimal degrees and should be specified to six decimal places. This will allow for granularity within a meter of the geographical position. The text components are separated by the SEMI-COLON character (ASCII decimal 59). The simple formula for converting Perreault & Resnick Expires December 27, 2008 [Page 28]
Internet-Draft vCard June 2008 degrees-minutes-seconds into decimal degrees is: decimal = degrees + minutes/60 + seconds/3600. Example: GEO:37.386013;-122.082932 7.6. Organizational Properties These properties are concerned with information associated with characteristics of the organization or organizational units of the object the vCard represents. 7.6.1. TITLE Purpose: To specify the job title, functional position or function of the object the vCard represents. Value type: A single text value. Special notes: This property is based on the X.520 Title attribute. Example: TITLE:Director\, Research and Development 7.6.2. ROLE Purpose: To specify information concerning the role, occupation, or business category of the object the vCard represents. Value type: A single text value. Special notes: This property is based on the X.520 Business Category explanatory attribute. This property is included as an organizational type to avoid confusion with the semantics of the TITLE property and incorrect usage of that property when the semantics of this property is intended. Example: ROLE:Programmer Perreault & Resnick Expires December 27, 2008 [Page 29]
Internet-Draft vCard June 2008 7.6.3. LOGO Purpose: To specify a graphic image of a logo associated with the object the vCard represents. Encoding: The encoding MUST be reset to "b" using the ENCODING parameter in order to specify inline, encoded binary data. If the value is referenced by a URI value, then the default encoding of 8bit is used and no explicit ENCODING parameter is needed. Value type: A single value. The default is binary value. It can also be reset to uri value. The uri value can be used to specify a value outside of this MIME entity. Special notes: This property SHOULD include the parameter "TYPE" to specify the graphic image format type. The TYPE parameter value MUST be an image media type as specified in [RFC4288]. The full media type name, including the "image/" prefix, should be used. However, implementations SHOULD be able to handle bare subtypes. Example: LOGO;VALUE=uri:http://www.example.com/pub/logos/abccorp.jpg LOGO;ENCODING=b;TYPE=image/jpeg:MIICajCCAdOgAwIBAgICBEUwDQYJKoZ AQEEBQAwdzELMAkGA1UEBhMCVVMxLDAqBgNVBAoTI05ldHNjYXBlIENvbW11bm ljYXRpb25zIENvcnBvcmF0aW9uMRwwGgYDVQQLExNJbmZvcm1hdGlvbiBTeXN0 <...the remainder of "B" encoded binary data...> 7.6.4. AGENT Purpose: To specify information about another person who will act on behalf of the individual or resource associated with the vCard. Value type: The default is a single URI value. It can also be reset to a single text value. The text value can be used to specify textual information. Special notes: This property typically is used to specify an area administrator, assistant, or secretary for the individual associated with the vCard. A key characteristic of the AGENT property is that it represents somebody or something that is separately addressable. Examples: Perreault & Resnick Expires December 27, 2008 [Page 30]
Internet-Draft vCard June 2008 AGENT:urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6 AGENT:http://example.com/directory/jdoe.vcf AGENT;VALUE=text:Please contact my assistant Jane Doe for any inquiries. 7.6.5. ORG Purpose: To specify the organizational name and units associated with the vCard. Value type: A single structured text value consisting of components separated the SEMI-COLON character (ASCII decimal 59). Special notes: The property is based on the X.520 Organization Name and Organization Unit attributes. The property value is a structured type consisting of the organization name, followed by one or more levels of organizational unit names. Example: A property value consisting of an organizational name, organizational unit #1 name and organizational unit #2 name. ORG:ABC\, Inc.;North American Division;Marketing 7.6.6. MEMBER Purpose: To include a member in the group this vCard represents. Value tpe: A single URI. It MAY refer to something other than a vCard object. For example, an e-mail distribution list could employ the "mailto" URI scheme for efficiency. Special notes: This property MUST NOT be present unless the value of the KIND property is "group". Examples: Perreault & Resnick Expires December 27, 2008 [Page 31]
Internet-Draft vCard June 2008 BEGIN:VCARD VERSION:4.0 KIND:group FN:The Doe family MEMBER:urn:uuid:03a0e51f-d1aa-4385-8a53-e29025acd8af MEMBER:urn:uuid:b8767877-b4a1-4c70-9acc-505d3819e519 END:VCARD BEGIN:VCARD VERSION:4.0 FN:John Doe UID:urn:uuid:03a0e51f-d1aa-4385-8a53-e29025acd8af END:VCARD BEGIN:VCARD VERSION:4.0 FN:Jane Doe UID:urn:uuid:b8767877-b4a1-4c70-9acc-505d3819e519 END:VCARD BEGIN:VCARD VERSION:4.0 KIND:group FN:Funky distribution list MEMBER:mailto:subscriber1@example.com MEMBER:xmpp:subscriber2@example.com MEMBER:sip:subscriber3@example.com MEMBER:tel:+1-418-555-5555 END:VCARD 7.6.7. RELATED Purpose: To specify a relationship the individual this vCard represents has with another. Value type: A single URI. Special notes: The TYPE parameter MAY be used to characterize the related individual. The understood types are: * "parent" means that the related individual is the parent of the individual this vCard represents. * "child" means the opposite of "parent". * "sibling" means that the two individuals are siblings. * "manager" means that the related individual is the direct hierarchical superior (i.e. supervisor or manager) of the Perreault & Resnick Expires December 27, 2008 [Page 32]
Internet-Draft vCard June 2008 individual this vCard represents. * "assistant" for an assistant or secretary. Other types may be registered to IANA as described in Section 12.1, and private extensions starting with "X-" may be used. Examples: RELATED;TYPE=manager:urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6 RELATED;TYPE=assistant:http://example.com/directory/jdoe.vcf 7.7. Explanatory Properties These properties are concerned with additional explanations, such as that related to informational notes or revisions specific to the vCard. 7.7.1. CATEGORIES Purpose: To specify application category information about the vCard. Value type: One or more text values separated by a COMMA character (ASCII decimal 44). Example: CATEGORIES:TRAVEL AGENT CATEGORIES:INTERNET,IETF,INDUSTRY,INFORMATION TECHNOLOGY 7.7.2. NOTE Purpose: To specify supplemental information or a comment that is associated with the vCard. Value type: A single text value. Special notes: The property is based on the X.520 Description attribute. Example: NOTE:This fax number is operational 0800 to 1715 EST\, Mon-Fri. Perreault & Resnick Expires December 27, 2008 [Page 33]
Internet-Draft vCard June 2008 7.7.3. PRODID Purpose: To specify the identifier for the product that created the vCard object. Type value: A single text value. Special notes: Implementations SHOULD use a method such as that specified for Formal Public Identifiers in [ISO9070] or for Universal Resource Names in [RFC3406] to assure that the text value is unique. Example: PRODID:-//ONLINE DIRECTORY//NONSGML Version 1//EN 7.7.4. REV Purpose: To specify revision information about the current vCard. Value type: The default is a single date-time value. Can also be reset to a single date value. Special notes: The value distinguishes the current revision of the information in this vCard for other renditions of the information. Example: REV:1995-10-31T22:27:10Z REV:1997-11-15 7.7.5. SORT-STRING Purpose: To specify the family name or given name text to be used for national-language-specific sorting of the FN and N types. Value type: A single text value. Special notes: The sort string is used to provide family name or given name text that is to be used in locale- or national- language- specific sorting of the formatted name and structured name types. Without this information, sorting algorithms could incorrectly sort this vCard within a sequence of sorted vCards. When this property is present in a vCard, then this family name or given name value is used for sorting the vCard. Examples: For the case of family name sorting, the following examples Perreault & Resnick Expires December 27, 2008 [Page 34]
Internet-Draft vCard June 2008 define common sort string usage with the FN and N properties. FN:Rene van der Harten N:van der Harten;Rene;J.;Sir;R.D.O.N. SORT-STRING:Harten FN:Robert Pau Shou Chang N:Pau;Shou Chang;Robert SORT-STRING:Pau FN:Osamu Koura N:Koura;Osamu SORT-STRING:Koura FN:Oscar del Pozo N:del Pozo Triscon;Oscar SORT-STRING:Pozo FN:Chistine d'Aboville N:d'Aboville;Christine SORT-STRING:Aboville 7.7.6. SOUND Purpose: To specify a digital sound content information that annotates some aspect of the vCard. By default this property is used to specify the proper pronunciation of the name property value of the vCard. Encoding: The encoding MUST be reset to "b" using the ENCODING parameter in order to specify inline, encoded binary data. If the value is referenced by a URI value, then the default encoding of 8bit is used and no explicit ENCODING parameter is needed. Value type: A single value. The default is binary value. It can also be reset to uri value. The uri value can be used to specify a value outside of this MIME entity. Special notes: This property SHOULD include the parameter "TYPE" to specify the audio format type. The TYPE parameter value MUST be an audio media type as specified in [RFC4288]. The full media type name, including the "audio/" prefix, should be used. However, implementations SHOULD be able to handle bare subtypes. Example: Perreault & Resnick Expires December 27, 2008 [Page 35]
Internet-Draft vCard June 2008 SOUND;TYPE=audio/basic;VALUE=uri:CID:JOHNQPUBLIC.part8. 19960229T080000.xyzMail@example.com SOUND;TYPE=audio/basic;ENCODING=b:MIICajCCAdOgAwIBAgICBEUwDQYJK AQEEBQAwdzELMAkGA1UEBhMCVVMxLDAqBgNVBAoTI05ldHNjYXBlIENvbW11bm ljYXRpb25zIENvcnBvcmF0aW9uMRwwGgYDVQQLExNJbmZvcm1hdGlvbiBTeXN0 <...the remainder of "B" encoded binary data...> 7.7.7. UID Purpose: To specify a value that represents a globally unique identifier corresponding to the individual or resource associated with the vCard. Value type: A single URI value. Special notes: The type is used to uniquely identify the object that the vCard represents. The "uuid" URN namespace defined in [RFC4122] is particularly well-suited to this task, but other URI schemes MAY be used. This property MUST NOT appear more than once in a given vCard, and MUST be present if synchronization is to be used. See Section 8. The PID parameter MUST NOT be applied to this property. Example: UID:urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6 7.7.8. URL Purpose: To specify a uniform resource locator associated with the object that the vCard refers to. Value type: A single uri value. Example: URL:http://www.swbyps.restaurant.french/~chezchic.html 7.7.9. VERSION Purpose: To specify the version of the vCard specification used to format this vCard. Perreault & Resnick Expires December 27, 2008 [Page 36]
Internet-Draft vCard June 2008 Value type: A single text value. Special notes: The property MUST be present in the vCard object. The value MUST be "4.0" if the vCard corresponds to this specification. Example: VERSION:4.0 7.8. Security Properties These properties are concerned with the security of communication pathways or access to the vCard. 7.8.1. CLASS Purpose: To specify the access classification for a vCard object. Value type: A single text value. Special notes: An access classification is only one component of the general security model for a directory service. The classification attribute provides a method of capturing the intent of the owner for general access to information described by the vCard object. Examples: CLASS:PUBLIC CLASS:PRIVATE CLASS:CONFIDENTIAL 7.8.2. KEY Purpose: To specify a public key or authentication certificate associated with the object that the vCard represents. Encoding: The encoding MUST be reset to "b" using the ENCODING parameter in order to specify inline, encoded binary data. If the value is a text value, then the default encoding of 8bit is used and no explicit ENCODING parameter is needed. Perreault & Resnick Expires December 27, 2008 [Page 37]
Internet-Draft vCard June 2008 Value type: A single value. The default is binary. It can also be reset to text value. The text value can be used to specify a text key. Special notes: The property can also include the parameter TYPE to specify the public key or authentication certificate format. This parameter should specify an IANA registered public key or authentication certificate format. It can also specify a non- standard format. Special notes: This property SHOULD include the parameter "TYPE" to specify the public key or authentication certificate format. The TYPE parameter value MUST be a media type as specified in [RFC4288]. Example: KEY;TYPE=application/pgp-keys;ENCODING=b:mQGiBEbEPUsRBACBF0RSIN mGutdM+KSAl7HMzwXHaLbvEOyu8At80I8qGejhzWowKbfem3X0m68Y/vhb+J2g 7q11KHpnEdNb67uZaj9nTQ09Q+UFtH25qD/Afn3+9bOJQaPjAUYzXu3vD/xmN8 <...remainder of "B" encoded binary data...> 7.9. Calendar Properties These properties are further specified in [RFC2739]. 7.9.1. FBURL Purpose: To specify the URI for a user's busy time in a vCard object. Value type: A single URI value. Special notes: Where multiple FBURL properties are specified, the default FBURL property is indicated with the PREF parameter. The FTP or HTTP type of URI points to an iCalendar object associated with a snapshot of the last six weeks of the user's busy time data. If the iCalendar object is represented as a file or document, it's file type should be "ifb". Examples: FBURL;PREF:http://www.example.com/busy/janedoe FBURL:FTP://ftp.example.com/busy/project-a.ifb Perreault & Resnick Expires December 27, 2008 [Page 38]
Internet-Draft vCard June 2008 7.9.2. CALADRURI Purpose: To specify the location to which an event request should be sent for the user. Value type: A single URI value. Special notes: Where multiple CALADRURI properties are specified, the default CALADRURI property is indicated with the PREF parameter. Example: CALADRURI;PREF:mailto:janedoe@example.com CALDARURI:http://example.com/calendar/jdoe 7.9.3. CALURI Purpose: To specify the URI for a user's calendar in a vCard object. Value type: A single URI value. Special notes: Where multiple CALURI properties are specified, the default CALURI property is indicated with the PREF parameter. The property should contain a URI pointing to an iCalendar object associated with a snapshot of the user's calendar store. If the iCalendar object is represented as a file or document, it's file type should be "ics". Examples: CALURI;PREF:http://cal.example.com/calA CALURI:ftp://ftp.example.com/calA.ics 7.10. Extended Properties and Parameters The properties and parameters defined by this document can be extended. Non-standard, private properties and parameters with a name starting with "X-" may be defined bilaterally between two cooperating agents without outside registration or standardization. 8. Synchronization vCard data often needs to be synchronized between devices. In this context, synchronization is defined as the intelligent merging of two representations of the same object. vCard 4.0 includes mechanisms to aid this process. Perreault & Resnick Expires December 27, 2008 [Page 39]
Internet-Draft vCard June 2008 8.1. Mechanisms Two vCards for which the UID properties (Section 7.7.7) are equivalent MUST be considered representations of the same object. Equivalence is determined as specified in [RFC3986], Section 6. A missing UID property MUST NOT be considered equivalent to any other. Hence, the UID property SHOULD be present if synchronization is to be used. Pairs of properties, one from each of a pair of vCards representing the same object, having equivalent names and PID parameter values MUST be considered representations of the same object. A missing PID parameter MUST NOT be considered equivalent to any other. Hence, the PID parameter SHOULD be present if synchronization is to be used. It is expected that a synchronization engine will exploit such property associations by e.g. overwriting the destination property value and parameters with the source destination property value and parameters. The particular merging strategy is out of scope for this document. 8.2. Example Two vCards are to by synchronized: BEGIN:VCARD VERSION:4.0 UID:urn:uuid:77a01597-0603-40f3-8138-36deca8618da FN;PID=1:Jane Doe EMAIL;PID=1:jdoe1@example.com EMAIL;PID=2:jdoe2@example.com END:VCARD BEGIN:VCARD VERSION:4.0 UID:urn:uuid:77a01597-0603-40f3-8138-36deca8618da FN;PID=1:Jane Doe EMAIL;PID=1:jdoe3@example.com EMAIL;PID=3:jdoe4@example.com END:VCARD Assuming the first one is the source and the other is the destination, a synchronization engine may produce the following merged vCard: Perreault & Resnick Expires December 27, 2008 [Page 40]
Internet-Draft vCard June 2008 BEGIN:VCARD VERSION:4.0 UID:urn:uuid:77a01597-0603-40f3-8138-36deca8618da FN;PID=1:Jane Doe EMAIL;PID=1:jdoe1@example.com EMAIL;PID=2:jdoe2@example.com EMAIL;PID=3:jdoe4@example.com END:VCARD 9. Formal Grammar The following formal grammar is provided to assist developers in building parsers for the vCard. This syntax is written according to the form described in [RFC5234], but it references just this small subset of [RFC5234] literals: ;******************************************* ; Basic vCard Definition ;******************************************* vcard-entity = 1*(vcard) vcard = "BEGIN" ":" "VCARD" 1*CRLF 1*(contentline) ;A vCard object MUST include the VERSION and FN properties. "END" ":" "VCARD" 1*CRLF contentline = name *(";" param ) ":" value CRLF ; When parsing a content line, folded lines must first ; be unfolded according to the unfolding procedure ; described above. When generating a content line, lines ; longer than 75 characters SHOULD be folded according to ; the folding procedure described in [MIME DIR]. name = iana-token / x-name ; Parsing of the param and value is ; based on the "name" or type identifier ; as defined in ABNF sections below iana-token = 1*(ALPHA / DIGIT / "-") ; vCard type or parameter identifier registered with IANA x-name = "X-" 1*(ALPHA / DIGIT / "-") ; Reserved for non-standard use param = param-name "=" param-value *("," param-value) Perreault & Resnick Expires December 27, 2008 [Page 41]
Internet-Draft vCard June 2008 param-name = iana-token / x-name param-value = ptext / quoted-string ptext = *SAFE-CHAR value = *VALUE-CHAR quoted-string = DQUOTE QSAFE-CHAR DQUOTE NON-ASCII = %x80-FF ; Use is restricted by outer MIME object (UTF-8 preferred) QSAFE-CHAR = WSP / %x21 / %x23-7E / NON-ASCII ; Any character except CTLs, DQUOTE SAFE-CHAR = WSP / %x21 / %x23-2B / %x2D-39 / %x3C-7E / NON-ASCII ; Any character except CTLs, DQUOTE, ";", ":", "," VALUE-CHAR = WSP / VCHAR / NON-ASCII ; Any textual character ;******************************************* ; vCard Type Definition ; ; Provides type-specific definitions for how the ; "value" and "param" are defined. ;******************************************* ; **** NAME **** param = "" ; No parameters allowed value = text-value ; **** KIND **** param = "" ; No parameters allowed value = kind-value kind-value = "individual" / "group" / "org" / x-name / iana-token ; **** PROFILE **** param = "" ; No parameters allowed value = text-value ; Value MUST be the case insensitive value "VCARD Perreault & Resnick Expires December 27, 2008 [Page 42]
Internet-Draft vCard June 2008 ; **** SOURCE **** param = source-param ; Only source parameters allowed value = uri source-param = ("VALUE" "=" "uri") / (x-name "=" *SAFE-CHAR) ; **** FN **** ;This type MUST be included in a vCard object. param = text-param ; Text parameters allowed value = text-value ; **** N **** ;This type MUST be included in a vCard object. param = text-param ; Text parameters allowed value = n-value n-value = 0*4(text-value *("," text-value) ";") text-value *("," text-value) ; Family; Given; Middle; Prefix; Suffix. ; Example: Public;John;Quincy,Adams;Reverend Dr. III ; **** NICKNAME **** param = text-param ; Text parameters allowed value = text-value-list ; **** PHOTO **** param = img-inline-param ; Only image parameters allowed param =/ img-refer-param ; Only image parameters allowed value = img-inline-value ; Value and parameter MUST match value =/ img-refer-value ; Value and parameter MUST match ; **** BDAY **** Perreault & Resnick Expires December 27, 2008 [Page 43]
Internet-Draft vCard June 2008 param = ("VALUE" "=" "date") ; Only value parameter allowed param =/ ("VALUE" "=" "date-time") ; Only value parameter allowed value = date-value ; Value MUST match value type value =/ date-time-value ; Value MUST match value type ; **** ADR **** param = adr-param / text-param ; Only adr and text parameters allowed value = adr-value ; **** LABEL **** param = adr-param / text-param ; Only adr and text parameters allowed value = text-value ; **** TEL **** param = tel-param ; Only tel parameters allowed value = uri-value tel-param = "TYPE" "=" tel-type *("," tel-type) tel-type = "HOME" / "WORK" / "PREF" / "VOICE" / "FAX" / "MSG" / "CELL" / "PAGER" / "BBS" / "MODEM" / "CAR" / "ISDN" / "VIDEO" / "PCS" / iana-token / x-name ; Values are case insensitive ; **** EMAIL **** param = email-param ; Only email parameters allowed value = text-value email-param = "TYPE" "=" email-type ["," "PREF"] ; Value is case insensitive email-type = "INTERNET" / "X400" / iana-token / "X-" word ; Values are case insensitive Perreault & Resnick Expires December 27, 2008 [Page 44]
Internet-Draft vCard June 2008 ; **** TZ **** param = "" ; No parameters allowed value = utc-offset-value ; **** GEO **** param = "" ; No parameters allowed value = float-value ";" float-value ; **** TITLE **** param = text-param ; Only text parameters allowed value = text-value ; **** ROLE **** param = text-param ; Only text parameters allowed value = text-value ; **** LOGO **** param = img-inline-param / img-refer-param ; Only image parameters allowed value = img-inline-value / img-refer-value ; Value and parameter MUST match ; **** AGENT **** param = agent-refer-param / text-param value = agent-refer-value / text-value ; Value and parameter MUST match agent-refer-param = "" ; No parameters allowed agent-refer-value = uri ; URI MUST refer to valid vCard object ; **** ORG **** param = text-param ; Only text parameters allowed value = org-value Perreault & Resnick Expires December 27, 2008 [Page 45]
Internet-Draft vCard June 2008 org-value = *(text-value ";") text-value ; First is Organization Name, remainder are Organization Units. ; **** MEMBER **** param = "" ; No parameters allowed value = uri ; Any valid URI scheme ; **** RELATED **** param = "TYPE" "=" related-type ; Value is case insensitive value = uri ; Any valid URI scheme related-type = "parent" / "child" / "sibling" / "manager" / "assistant" / iana-token / "X-" word ; Values are case insensitive ; **** CATEGORIES **** param = text-param ; Only text parameters allowed value = text-value-list ; **** NOTE **** param = text-param ; Only text parameters allowed value = text-value ; **** PRODID **** param = "" ; No parameters allowed value = text-value ; **** REV **** param = ["VALUE" "=" "date-time"] ; Only value parameters allowed. Values are case insensitive. param =/ "VALUE" "=" "date" ; Only value parameters allowed. Values are case insensitive. value = date-time-value value =/ date-value Perreault & Resnick Expires December 27, 2008 [Page 46]
Internet-Draft vCard June 2008 ; **** SORT-STRING **** param = text-param ; Only text parameters allowed value = text-value ; **** SOUND **** param = snd-inline-param ; Only sound parameters allowed param =/ snd-refer-param ; Only sound parameters allowed value = snd-line-value ; Value MUST match value type value =/ snd-refer-value ; Value MUST match value type snd-inline-value = binary-value CRLF ; Value MUST be "b" encoded audio content snd-inline-param = ("VALUE" "=" "binary") / ("ENCODING" "=" "b") / ("TYPE" "=" *SAFE-CHAR) ; Value MUST be an IANA registered audio type snd-refer-value = uri ; URI MUST refer to audio content of given type snd-refer-param = ("VALUE" "=" "uri") / ("TYPE" "=" word) ; Value MUST be an IANA registered audio type ; **** UID **** param = "" ; No parameters allowed value = uri ; **** URL **** param = "" ; No parameters allowed value = uri ; **** VERSION **** ;This type MUST be included in a vCard object. param = "" Perreault & Resnick Expires December 27, 2008 [Page 47]
Internet-Draft vCard June 2008 ; No parameters allowed value = text-value ; Value MUST be "4.0" ; **** CLASS **** param = "" ; No parameters allowed value = "PUBLIC" / "PRIVATE" / "CONFIDENTIAL" / iana-token / x-name ; Value are case insensitive ; **** KEY **** param = key-txt-param ; Only value and type parameters allowed param =/ key-bin-param ; Only value and type parameters allowed value = text-value value =/ binary-value key-txt-param = "TYPE" "=" keytype key-bin-param = ("TYPE" "=" keytype) / ("ENCODING" "=" "b") ; Value MUST be a "b" encoded key or certificate keytype = param-value ; Type MUST be a media type as defined in RFC 4288 ; **** X- **** non-standard type param = text-param / (x-name "=" param-value) ; Only text or non-standard parameters allowed value = text-value ;******************************************* ; vCard Commonly Used Parameter Definition ;******************************************* text-param = ("VALUE" "=" "ptext") / ("LANGUAGE" "=" langval) / (x-name "=" param-value) langval = <a language string as defined in [RFC4646]> Perreault & Resnick Expires December 27, 2008 [Page 48]
Internet-Draft vCard June 2008 img-inline-value = binary-value ;Value MUST be "b" encoded image content img-inline-param img-inline-param = ("VALUE" "=" "binary") / ("ENCODING" "=" "b") / ("TYPE" "=" param-value) ;TYPE value MUST be an image media type as defined in RFC 4288 img-refer-value = uri ;URI MUST refer to image content of given type img-refer-param = ("VALUE" "=" "uri") / ("TYPE" "=" param-value) ;TYPE value MUST be an image media type as defined in RFC 4288 adr-param = ("TYPE" "=" adr-type *("," adr-type)) / (text-param) adr-type = "home" / "work" / "pref" / iana-token / x-name adr-value = 0*6(text-value ";") text-value ; PO Box, Extended Address, Street, Locality, Region, Postal ; Code, Country Name ;******************************************* ; vCard Type Value Definition ;******************************************* text-value-list = 1*text-value *("," 1*text-value) text-value = *(SAFE-CHAR / ":" / DQUOTE / ESCAPED-CHAR) ESCAPED-CHAR = "\\" / "\;" / "\," / "\n" / "\N" ; \\ encodes \, \n or \N encodes newline ; \; encodes ;, \, encodes , binary-value = <A "b" encoded text value as defined in [RFC2047]> date-value = <A single date value as defined in [RFC2425]> time-value = <A single time value as defined in [RFC2425]> date-time-value = <A single date-time value as defined in [RFC2425]> float-value = <A single float value as defined in [RFC2425]> phone-number-value = phone-prefix 1*(SP 1*DIGIT) [phone-ext] Perreault & Resnick Expires December 27, 2008 [Page 49]
Internet-Draft vCard June 2008 phone-prefix = "+" 1*DIGIT / "(" 1*DIGIT ")" phone-ext = "ext." 1*DIGIT uri-value = <A uri value as defined in [RFC2425]> utc-offset-value = ("+" / "-") time-hour ":" time-minute time-hour = 2DIGIT ;00-23 time-minute = 2DIGIT ;00-59 10. Example: Authors' vCards BEGIN:VCARD VERSION:4.0 FN:Simon Perreault N:Perreault;Simon;;;ing. jr.,M.Sc. BDAY:1983-02-03 GENDER:M ORG:Viagenie ADR;TYPE=work:;;2600 boul. Laurier\, suite 625; Quebec;QC;G1V 4W1;Canada TEL;TYPE=voice,work:tel:+1-418-656-9254;ext=102 TEL;TYPE=fax,work:tel:+1-418-656-9257 EMAIL;TYPE=internet,work:simon.perreault@viagenie.ca GEO:46.772673,-71.282945 CLASS:PUBLIC KEY;VALUE=uri:http://www.viagenie.ca/simon.perreault/simon.asc END:VCARD BEGIN:VCARD VERSION:4.0 FN:Pete Resnick N:Resnick;Pete;;; GENDER:M ORG:QUALCOMM Incorporated ADR;TYPE=work:;;5775 Morehouse Drive;San Diego;CA;92121-1714;US TEL;TYPE=voice:tel:+1-858-651-4478 EMAIL;TYPE=internet:presnick@qualcomm.com URL:http://www.qualcomm.com/~presnick/ END:VCARD 11. Security Considerations o Internet mail is subject to many well known security attacks, including monitoring, replay, and forgery. Care should be taken by any directory service in allowing information to leave the scope of the service itself, where any access controls can no Perreault & Resnick Expires December 27, 2008 [Page 50]
Internet-Draft vCard June 2008 longer be guaranteed. Applications should also take care to display directory data in a "safe" environment (e.g., PostScript- valued types). o vCards can carry cryptographic keys or certificates, as described in Section 7.8.2. o Section 7.8.1 specifies a desired security classification policy for a particular vCard. That policy is not enforced in any way. o The vCard objects have no inherent authentication or privacy, but can easily be carried by any security mechanism that transfers MIME objects with authentication or privacy. In cases where threats of "spoofed" vCard information is a concern, the vCard SHOULD BE transported using one of these secure mechanisms. o The information in a vCard may become out of date. In cases where the vitality of data is important to an originator of a vCard, the "URL" type described in Section 7.7.8 SHOULD BE specified. In addition, the "REV" type described in section Section 7.7.4 can be specified to indicate the last time that the vCard data was updated. 12. IANA Considerations 12.1. Registering New vCard Elements This section defines the process for registering new or modified vCard elements (i.e. properties, parameters, value data types, and values) with IANA. 12.1.1. Registration Procedure The IETF will create a mailing list, vcard@ietf.org [1], which can be used for public discussion of vCard element proposals prior to registration. Use of the mailing list is strongly encouraged. The IESG will appoint a designated expert who will monitor the vcard@ietf.org [1] mailing list and review registrations. Registration of new vCard elements MUST be reviewed by the designated expert and published in an RFC. A Standard Tracks RFC is REQUIRED for the regisration of new value data types that modify existing properties. A Standard Tracks RFC is also REQUIRED for registration of vCard elements that modify vCard elements previously documented in a Standard Tracks RFC. The registration procedure begins when a completed registration template, defined in the sections below, is sent to Perreault & Resnick Expires December 27, 2008 [Page 51]
Internet-Draft vCard June 2008 vcard@ietf.org [1] and iana@iana.org [2]. The designated expert is expected to tell IANA and the submitter of the registration within two weeks whether the registration is approved, approved with minor changes, or rejected with cause. When a registration is rejected with cause, it can be re-submitted if the concerns listed in the cause are addressed. Decisions made by the designated expert can be appealed to the IESG Applications Area Director, then to the IESG. They follow the normal appeals procedure for IESG decisions. 12.1.2. Vendor Namespace The vendor namespace is used for vCard elements associated with commercially available products. "Vendor" or "producer" are construed as equivalent and very broadly in this context. A registration may be placed in the vendor namespace by anyone who needs to interchange files associated with the particular product. However, the registration formally belongs to the vendor or organization handling the vCard elements in the namespace being registered. Changes to the specification will be made at their request, as discussed in subsequent sections. vCard elements belonging to the vendor namespace will be distinguished by the "VND-" prefix. That may be followed, at the discretion of the registrant, by either a vCard element name from a well-known producer (e.g., "VND-MUDPIE") or by an IANA-approved designation of the producer's name that is followed by a vCard element designation (e.g., "VND-BIGCOMPANY-MUDPIE"). While public exposure and review of vCard elements to be registered in the vendor namespace is not required, using the vcard@ietf.org [1] mailing list for review is strongly encouraged to improve the quality of those specifications. Registrations in the vendor namespace may be submitted directly to the IANA. 12.1.3. Registration Template for Properties A property is defined by completing the following template. Property name: The name of the property. Purpose: The purpose of the property. Give a short but clear description. Value type: Any of the valid value types for the property value needs to be specified. The default value type also needs to be specified. Perreault & Resnick Expires December 27, 2008 [Page 52]
Internet-Draft vCard June 2008 Property parameters: Any of the valid property parameters for the property MUST be specified. Description: Any special notes about the property, how it is to be used, etc. Format definition: The ABNF for the property definition needs to be specified. Example(s): One or more examples of instances of the property needs to be specified. 12.1.4. Registration Template for Parameters A parameter is defined by completing the following template. Parameter name: The name of the parameter. Purpose: The purpose of the parameter. Give a short but clear description. Description: Any special notes about the parameter, how it is to be used, etc. Format definition: The ABNF for the parameter definition needs to be specified. Example(s): One or more examples of instances of the parameter needs to be specified. 12.1.5. Registration Template for Value Data Types A value data type is defined by completing the following template. Value name: The name of the value type. Purpose: The purpose of the value type. Give a short but clear description. Description: Any special notes about the value type, how it is to be used, etc. Format definition: The ABNF for the value type definition needs to be specified. Perreault & Resnick Expires December 27, 2008 [Page 53]
Internet-Draft vCard June 2008 Example(s): One or more examples of instances of the value type needs to be specified. 12.1.6. Registration Template for Values A value is defined by completing the following template. Value: The value literal. Purpose: The purpose of the value. Give a short but clear description. Conformance: The vCard properties and/or parameters that can take this value needs to be specified. Example(s): One or more examples of instances of the value needs to be specified. The following is a fictitious example of a registration of a vCard value: Value: TOP-SECRET Purpose: This value is used to specify the access classification of top-secret vCards. Conformance: This value can be used with the "CLASS" property. Example(s): The following is an example of this value used with the "CLASS" property: CLASS:TOP-SECRET 12.2. Initial vCard Elements Registries The IANA is requested to create and maintain the following registries for vCard elements with pointers to appropriate reference documents. 12.2.1. Properties Registry The following table is to be used to initialize the properties registry. Perreault & Resnick Expires December 27, 2008 [Page 54]
Internet-Draft vCard June 2008 +-------------+---------+------------------------+ | Property | Status | Reference | +-------------+---------+------------------------+ | SOURCE | Current | RFCXXXX, Section 7.1.3 | | NAME | Current | RFCXXXX, Section 7.1.4 | | KIND | Current | RFCXXXX, Section 7.1.5 | | FN | Current | RFCXXXX, Section 7.2.1 | | N | Current | RFCXXXX, Section 7.2.2 | | NICKNAME | Current | RFCXXXX, Section 7.2.3 | | PHOTO | Current | RFCXXXX, Section 7.2.4 | | BDAY | Current | RFCXXXX, Section 7.2.5 | | DDAY | Current | RFCXXXX, Section 7.2.6 | | BIRTH | Current | RFCXXXX, Section 7.2.7 | | DEATH | Current | RFCXXXX, Section 7.2.8 | | GENDER | Current | RFCXXXX, Section 7.2.9 | | ADR | Current | RFCXXXX, Section 7.3.1 | | LABEL | Current | RFCXXXX, Section 7.3.2 | | TEL | Current | RFCXXXX, Section 7.4.1 | | EMAIL | Current | RFCXXXX, Section 7.4.2 | | IMPP | Current | RFCXXXX, Section 7.4.3 | | LANG | Current | RFCXXXX, Section 7.4.4 | | TZ | Current | RFCXXXX, Section 7.5.1 | | GEO | Current | RFCXXXX, Section 7.5.2 | | TITLE | Current | RFCXXXX, Section 7.6.1 | | ROLE | Current | RFCXXXX, Section 7.6.2 | | LOGO | Current | RFCXXXX, Section 7.6.3 | | AGENT | Current | RFCXXXX, Section 7.6.4 | | ORG | Current | RFCXXXX, Section 7.6.5 | | MEMBER | Current | RFCXXXX, Section 7.6.6 | | RELATED | Current | RFCXXXX, Section 7.6.7 | | CATEGORIES | Current | RFCXXXX, Section 7.7.1 | | NOTE | Current | RFCXXXX, Section 7.7.2 | | PRODID | Current | RFCXXXX, Section 7.7.3 | | REV | Current | RFCXXXX, Section 7.7.4 | | SORT-STRING | Current | RFCXXXX, Section 7.7.5 | | SOUND | Current | RFCXXXX, Section 7.7.6 | | UID | Current | RFCXXXX, Section 7.7.7 | | URL | Current | RFCXXXX, Section 7.7.8 | | VERSION | Current | RFCXXXX, Section 7.7.9 | | CLASS | Current | RFCXXXX, Section 7.8.1 | | KEY | Current | RFCXXXX, Section 7.8.2 | | FBURL | Current | RFCXXXX, Section 7.9.1 | | CALADRURI | Current | RFCXXXX, Section 7.9.2 | | CALURI | Current | RFCXXXX, Section 7.9.3 | +-------------+---------+------------------------+ Perreault & Resnick Expires December 27, 2008 [Page 55]
Internet-Draft vCard June 2008 12.2.2. Parameters Registry The following table is to be used to initialize the parameters registry. +-----------+---------+----------------------+ | Parameter | Status | Reference | +-----------+---------+----------------------+ | LANGUAGE | Current | RFCXXXX, Section 6.1 | | ENCODING | Current | RFCXXXX, Section 6.2 | | VALUE | Current | RFCXXXX, Section 6.3 | | PID | Current | RFCXXXX, Section 6.4 | | TYPE | Current | RFCXXXX, Section 6.5 | +-----------+---------+----------------------+ 12.2.3. Value Data Types Registry The following table is to be used to initialize the parameters registry. +-----------------+---------+----------------------+ | Value Data Type | Status | Reference | +-----------------+---------+----------------------+ | BINARY | Current | RFCXXXX, Section 5.7 | | BOOLEAN | Current | RFCXXXX, Section 5.4 | | DATE | Current | RFCXXXX, Section 5.3 | | TIME | Current | RFCXXXX, Section 5.3 | | DATE-TIME | Current | RFCXXXX, Section 5.3 | | FLOAT | Current | RFCXXXX, Section 5.6 | | INTEGER | Current | RFCXXXX, Section 5.5 | | TEXT | Current | RFCXXXX, Section 5.1 | | URI | Current | RFCXXXX, Section 5.2 | +-----------------+---------+----------------------+ 13. Acknowledgements The authors would like to thank Frank Dawson and Tim Howes, the original authors of [RFC2425] and [RFC2426], as well as the following individuals who have participated in the drafting, review and discussion of this memo: Marc Blanchet, Stephane Bortzmeyer, Dan Brickley, Chris Bryant, Dany Cauchie, Darryl Champagne, Cyrus Daboo, Lisa Dusseault, Javier Godoy, Helge Hess, Alexander Mayrhofer, Chris Newman, Mark Paterson, Julian Reschke, Peter K. Sheerin, Anil Srivastava, and Kurt Zeilenga. 14. References Perreault & Resnick Expires December 27, 2008 [Page 56]
Internet-Draft vCard June 2008 14.1. Normative References [CCITT.E163.1988] International Telephone and Telegraph Consultative Committee, "Numbering Plan for the International Telephone Service", CCITT Recommendation E.163, 1988. [CCITT.X121.1988] International Telephone and Telegraph Consultative Committee, "International Numbering Plan for the Public Data Networks", CCITT Recommendation X.121, 1988. [CCITT.X520.1988] International International Telephone and Telegraph Consultative Committee, "Information Technology - Open Systems Interconnection - The Directory: Selected Attribute Types", CCITT Recommendation X.520, November 1988. [CCITT.X521.1988] International International Telephone and Telegraph Consultative Committee, "Information Technology - Open Systems Interconnection - The Directory: Selected Object Classes", CCITT Recommendation X.521, November 1988. [ISO.8601.1988] International Organization for Standardization, "Data elements and interchange formats - Information interchange - Representation of dates and times", ISO Standard 8601, June 1988. [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, November 1996. [RFC2047] Moore, K., "MIME (Multipurpose Internet Mail Extensions) Part Three: Message Header Extensions for Non-ASCII Text", RFC 2047, November 1996. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2425] Howes, T., Smith, M., and F. Dawson, "A MIME Content-Type for Directory Information", RFC 2425, September 1998. Perreault & Resnick Expires December 27, 2008 [Page 57]
Internet-Draft vCard June 2008 [RFC2426] Dawson, F. and T. Howes, "vCard MIME Directory Profile", RFC 2426, September 1998. [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners- Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999. [RFC2739] Small, T., Hennessy, D., and F. Dawson, "Calendar Attributes for vCard and LDAP", RFC 2739, January 2000. [RFC2822] Resnick, P., "Internet Message Format", RFC 2822, April 2001. [RFC2978] Freed, N. and J. Postel, "IANA Charset Registration Procedures", BCP 19, RFC 2978, October 2000. [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003. [RFC3966] Schulzrinne, H., "The tel URI for Telephone Numbers", RFC 3966, December 2004. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally Unique IDentifier (UUID) URN Namespace", RFC 4122, July 2005. [RFC4288] Freed, N. and J. Klensin, "Media Type Specifications and Registration Procedures", BCP 13, RFC 4288, December 2005. [RFC4646] Phillips, A. and M. Davis, "Tags for Identifying Languages", BCP 47, RFC 4646, September 2006. [RFC4770] Jennings, C. and J. Reschke, Ed., "vCard Extensions for Instant Messaging (IM)", RFC 4770, January 2007. [RFC5234] Crocker, D. and P. Overell, "Augmented BNF Perreault & Resnick Expires December 27, 2008 [Page 58]
Internet-Draft vCard June 2008 for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. [oldreference_UNICODE] The International Organization for Standardization, "The Unicode Standard - Version 2.0", The Unicode Consortium", July 1996. [oldreference_VCARD] Internet Mail Consortium, "vCard - The Electronic Business Card Version 2.1", September September. 14.2. Informative References [ISO9070] The International Organization for Standardization, "ISO 9070, Information Processing - SGML support facilities - Registration Procedures for Public Text Owner Identifiers", April 1991. [RFC3406] Daigle, L., van Gulik, D., Iannella, R., and P. Faltstrom, "Uniform Resource Names (URN) Namespace Definition Mechanisms", BCP 66, RFC 3406, October 2002. [WGS84] National Imagery and Mapping Agency, "Department of Defense World Geodetic System 1984, Third Edition", NIMA TR8350.2, January 2000. URIs [1] <mailto:vcard@ietf.org> [2] <mailto:iana@iana.org> Appendix A. Differences from RFCs 2425 and 2426 This appendix contains a list of changes that have been made in the vCard specification from RFCs 2425 and 2426. A.1. New Structure o [RFC2425] and [RFC2426] have been merged. Initially [RFC2425] was intended to be extensible but only 2426 ever extended it. o vCard is now not only a MIME type but a stand-alone format. Perreault & Resnick Expires December 27, 2008 [Page 59]
Internet-Draft vCard June 2008 o A proper MIME type registration form has been included. o UTF-8 is now the default character set. o New vCard elements can be registered from IANA. A.2. Removed Features o The group construct (i.e. GROUP.PROPERTY:...) no longer exists. o The CONTEXT and CHARSET parameters are no more. o The MAILER property is no more. o The "intl", "dom", "postal", and "parcel" TYPE parameter values for the ADR and LABEL properties have been removed. o Inline vCards (such as the value of the AGENT property) are no longer supported. A.3. New Properties and Parameters o The KIND, GENDER, LANG, DDAY, BIRTH, and DEATH properties have been added. o [RFC2739], which defines the FBURL, CALADRURI, CAPURI, and CALURI properties, has been merged in. o [RFC4770], which defines the IMPP property, has been merged in. o The "work", "home", and "uri" TYPE parameter values for the EMAIL property have been added. A.4. Other Changes o Synchronization is addressed in Section 8. o The N property is no longer mandatory. o The value of TEL is now a URI. Appendix B. Change Log (to be removed by RFC Editor prior to publication) B.1. Changes in -02 Perreault & Resnick Expires December 27, 2008 [Page 60]
Internet-Draft vCard June 2008 o Removed useless text in IMPP description. o Added CalDAV-SCHED example to CALADRURI. o Removed CAPURI property. o Dashes in dates and colons in times are now mandatory. o Allow for dates such as 2008 and 2008-05 and times such as 07 and 07:54. o Removed inline vCard value. o Made AGENT only accept URI references instead of inline vCards. o Added the MEMBER property. o Renamed the UID parameter to PID. o Changed the value type of the PID parameter to "a small integer." o Changed the presence of UID and PID when synchronization is to be used from MUST to SHOULD. o Added the RELATED (Section 7.6.7) property. o Fixed many ABNF typos (issue #252). o Changed formatting of ABNF comments to make them easier to read (issue #226). B.2. Changes in -01 o Merged [RFC2739] in. o Converted all foobar.com, abc.com, etc. to example.com. o Fixed bugs in ABNF. o Made explicit that coordinates in the GEO property are expressed in the WGS 84 reference system. o Clarified folding issues with multi-byte characters. o Made the value of TEL a URI. o Added the UID parameter. Perreault & Resnick Expires December 27, 2008 [Page 61]
Internet-Draft vCard June 2008 o Made the UID property's value type a URI. o Added Section 8. o Created IANA process for registering new parameters, value types, and properties. o Created the initial IANA registries. o Created vendor namespace based on text from RFC 4288. B.3. Changes in -00 o Name change because draft has been accepted as WG item. Otherwise, same as draft-resnick-vcarddav-vcardrev-01. o Removed reference to RFC 2234. o Fixed errata from http://www.rfc-editor.org/errata_search.php/doc/html/rfc2426. o Removed passage referring to RFC 2425 profiles. o Renamed Section 7.4 from "Telecommunications Adressing Properties" to "Communications Properties. o Added Appendix A and Appendix B. o Added reference to [RFC4770]. o Removed the group construct. o Made the N property no longer mandatory. o Added the KIND property. o Clarified meaning of TYPE parameter value for PHOTO, LOGO, KEY, and SOUND. o Removed the CONTEXT parameter. o Removed the MAILER property. o Made reference to [ISO9070] informative. o Removed "intl", "dom", "postal", and "parcel" TYPE parameter values for the ADR and LABEL properties. Perreault & Resnick Expires December 27, 2008 [Page 62]
Internet-Draft vCard June 2008 o Clarified meaning of "extended address" ADR field. o Mentioned [RFC3406] as another method of generating PRODID values. o Updated obsolete references. o Allowed BDAY and DDAY value types to be text values for fuzzy dates. o Removed the CHARSET property. Now the encoding is always UTF-8, except when overridden by the Content-Type (which is considered a compatibility feature). Authors' Addresses Simon Perreault Viagenie 2600 boul. Laurier, suite 625 Quebec, QC G1V 4W1 Canada Phone: +1 418 656 9254 EMail: simon.perreault@viagenie.ca URI: http://www.viagenie.ca Peter W. Resnick QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 US Phone: +1 858 651 4478 EMail: presnick@qualcomm.com URI: http://www.qualcomm.com/~presnick/ Perreault & Resnick Expires December 27, 2008 [Page 63]
Internet-Draft vCard June 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgements Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). This document was produced using xml2rfc v1.32 (of http://xml.resource.org/) from a source in RFC-2629 XML format. Perreault & Resnick Expires December 27, 2008 [Page 64]
