Networking                                                      P. Jakma
Internet-Draft                                          Sun Microsystems
Expires: April 12, 2009                                  October 9, 2008

    Revised Default Values for the BGP 'Minimum Route Advertisement

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at

   The list of Internet-Draft Shadow Directories can be accessed at

   This Internet-Draft will expire on April 12, 2009.


   This document briefly examines what is known about the effects of the
   BGP MRAI timer, particularly on convergence.  It highlights published
   work which suggests the MRAI interval as deployed has an adverse
   effect on the convergence time of BGP.

   It then recommends revised, lower default values for the MRAI timer,
   thought to be more suited to today's Internet environment.

Jakma                    Expires April 12, 2009                 [Page 1]

Internet-Draft    BGP MRAI Timer Value Recommendations      October 2008

Table of Contents

   1.  Background  . . . . . . . . . . . . . . . . . . . . . . . . . . 3
     1.1.  The MRAI Timer  . . . . . . . . . . . . . . . . . . . . . . 3
     1.2.  Known effects of the MRAI timer on convergence  . . . . . . 3
     1.3.  Interaction with Flap-Damping . . . . . . . . . . . . . . . 3
     1.4.  Current Status of the MRAI  . . . . . . . . . . . . . . . . 4
   2.  Risk Evaluation in the Choice of MRAI Time  . . . . . . . . . . 4
   3.  Recommended values for the MRAI . . . . . . . . . . . . . . . . 5
   4.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 5
   5.  Security Considerations . . . . . . . . . . . . . . . . . . . . 5
   6.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . 5
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 5
     7.1.  Normative References  . . . . . . . . . . . . . . . . . . . 5
     7.2.  Informative References  . . . . . . . . . . . . . . . . . . 6
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . . . 6
   Intellectual Property and Copyright Statements  . . . . . . . . . . 8

Jakma                    Expires April 12, 2009                 [Page 2]

Internet-Draft    BGP MRAI Timer Value Recommendations      October 2008

1.  Background

   The proper functioning of the [BGP] routing protocol is of great
   importance to the Internet.  Issues regarding matters of its
   stability and convergence have been documented widely, such as in
   [BGP-STAB], [bgp-converge] and [Potaroo0607].

   One such issue is the effect of 'Minimum Route Advertisement
   Interval' (MRAI).

1.1.  The MRAI Timer

   The Minimum Route Advertisement Interval (MRAI) timer is specified in
   RFC4271 [BGP].  This timer acts to rate-limit updates, on a per-
   destination basis.  [BGP] suggests values of 30s and 5s for this
   interval for eBGP and iBGP respectively.  The MRAI must also be
   applied to withdrawals according to RFC4271 [BGP], a change from the
   earlier RFC1771.

   Some implementations apply this rate-limiting on a per-peer basis,
   presumably an adequate approximation.  Some implementations apply it
   to withdrawal methods (often called "WRATE" in the literature).  Some
   implementations do not apply MRAI at all.

1.2.  Known effects of the MRAI timer on convergence

   The MRAI timer serves to suppress messages which BGP would otherwise
   send out to describe transitory states, and so allow BGP to converge
   with significantly fewer messages sent.  This beneficial effect of
   the MRAI timer, in terms of # of messages, increases as the timer is
   increased until an optimum value is reached, after which the
   beneficial effect stabilises. [bgp-converge] [mrai-final]

   In terms of convergence time, a similar beneficial effect is seen as
   the MRAI increases to the same optimum value.  However as the timer
   value is increased past the optimum, the convergence time increases
   again linearly - the scale of this increase is worse with WRATE.
   [bgp-converge] [mrai-final]

   The optimum MRAI timer value is dependent on several factors, most
   particularly the topology.  The optimum value will differ between
   different subsets of the Internet. [mrai-final]

1.3.  Interaction with Flap-Damping

   As the MRAI helps eliminate some updates, it interacts with flap-
   damping [BGP-DAMP].  The lower the MRAI timer, the greater the risk
   of crossing below the threshold of the optimum value.  So with a

Jakma                    Expires April 12, 2009                 [Page 3]

Internet-Draft    BGP MRAI Timer Value Recommendations      October 2008

   lower value, there is an increased number of updates somewhere within
   the BGP system, and hence an increased risk of paths being dampened,
   which otherwise would not.

   So, in presence of significant flap-damping deployment and given the
   uncertainty of what the optimum is, it is reasonable to err towards
   selecting a value of the MRAI timer significantly higher than the

   However, given that flap-damping increasingly is discouraged
   [RIPE-378] in Internet routing, this particular need to be
   conservative in the choice of MRAI timer value may be less important.

1.4.  Current Status of the MRAI

   The current recommended value of 30s may be far higher than is
   optimal, based on observations of certain parameters related to the
   topology of the Internet.  In [mrai-final] it is suggested that the
   optimal value may be between 5s ('semi-safe') to 15s ('safe').  The
   estimation of the 'safe' value here is of no relevance if WRATE is
   universally deployed, as in such a case the 'semi-safe' value and
   'safe' value are the same.  Further empirical work by the same
   authors [mrai-internet] suggests that the optimal, Internet MRAI may
   be below 5s.

   Further, [BGP-STAB] and [Potaroo0607] argue that operational
   conditions (e.g. different routers using different MRAI values) mean
   the MRAI is having an adverse effect even on the number of messages
   sent, and so further exacerbating convergence problems in the global
   BGP system, such as path hunting.  The [BGP-STAB] document goes
   further still and argues that MRAI be deprecated in favour of some
   better way of damping BGP UPDATES, however there are no clear
   proposals before the IDR as of this writing for such changes to BGP.

2.  Risk Evaluation in the Choice of MRAI Time

   Though there is an optimum value for the MRAI, it's unlikely that it
   can be determined empirically or otherwise for the general Internet.
   It may even not be possible, as the optimum MRAI will differ for
   different subsets of the Internet.  Some degree of guesstimation at a
   reasonable value for the MRAI is required, which is an exercise in
   risk; whether to err towards fast convergence at the risk of a
   disproportionate increase in BGP messaging, or to err to the side of
   an optimal number of messages at the expense of convergence.

   Arguably, economising on bandwidth and control-plane processing power
   is today less important than the convergence time of BGP, than in

Jakma                    Expires April 12, 2009                 [Page 4]

Internet-Draft    BGP MRAI Timer Value Recommendations      October 2008

   times past.  Presuming this, any new recommendations for the MRAI
   should seek to err slightly to the side of convergence, rather than
   erring towards minimising BGP traffic.

   Further, if we assume most implementations apply the MRAI to
   withdrawals, then the Internet BGP topology effectively is WRATE-
   enabled, and [mrai-final] suggests there is even less benefit to
   erring toward a higher MRAI.

   The most definite risk of lowering the MRAI is the increased risk of
   flap-damping, if the value is set too much below the optimum.
   Therefore, taking into account estimations of that optimum is
   required.  That said, at least one BGP implementation by default does
   not apply any MRAI at all.

3.  Recommended values for the MRAI

   The suggested default values for the
   MinRouteAdvertisementIntervalTimer given in RFC4271 [BGP] are hereby
   revised to be 5s for eBGP connections, and 1s or less for iBGP

4.  IANA Considerations

   There are no requests made to IANA in this document.

5.  Security Considerations

   This document raises no new security considerations.

6.  Acknowledgements

   The author would like to thank Manav Bhatia for his helpful review
   and comments.

7.  References

7.1.  Normative References

   [BGP]      Rekhter, Y., Li, T., and S. Hares, "A Border Gateway
              Protocol 4 (BGP-4)", RFC 4271, January 2006.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate

Jakma                    Expires April 12, 2009                 [Page 5]

Internet-Draft    BGP MRAI Timer Value Recommendations      October 2008

              Requirement Levels", RFC 2119, BCP 14, February 2001.

7.2.  Informative References

              Li, T. and G. Huston, "BGP Stability Improvements",
              I-D draft-li-bgp-stability, June 2007.

              Villamizar, C., Chandra, R., and R. Govindan, "BGP Route
              Flap Damping", RFC 2439, November 1998.

              Huston, G., "Damping BGP", June 2007,

              Smith, P. and P. Panigl, "RIPE RRG: Recommendations on
              Route-flap Damping", May 2006,

              Griffin, T. and B. Premore, "An Experimental Analysis of
              BGP Convergence Time", November 2001,

              Qiu, J., Hao, R., and X. Li, "An Experimental Study of the
              BGP Rate-limiting Timer", June 2003,

              Qiu, J., Hao, R., and X. Li, "The Optimal Rate-Limiting
              Timer of BGP for Routing Convergence", April 2005,

Jakma                    Expires April 12, 2009                 [Page 6]

Internet-Draft    BGP MRAI Timer Value Recommendations      October 2008

Author's Address

   Paul Jakma
   Sun Microsystems
   Linlithgow, West Lothian  EH49 7LR

   Phone: +44 1506 673150

Jakma                    Expires April 12, 2009                 [Page 7]

Internet-Draft    BGP MRAI Timer Value Recommendations      October 2008

Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at

Jakma                    Expires April 12, 2009                 [Page 8]