Network Working Group M. Jones
Internet-Draft Microsoft
Intended status: Standards Track D. Balfanz
Expires: November 9, 2012 Google
J. Bradley
independent
Y. Goland
Microsoft
J. Panzer
Google
N. Sakimura
Nomura Research Institute
P. Tarjan
Facebook
May 8, 2012
JSON Web Token (JWT)
draft-jones-json-web-token-09
Abstract
JSON Web Token (JWT) is a means of representing claims to be
transferred between two parties. The claims in a JWT are encoded as
a JSON object that is digitally signed or HMACed using JSON Web
Signature (JWS) and/or encrypted using JSON Web Encryption (JWE).
The suggested pronunciation of JWT is the same as the English word
"jot".
Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
Jones, et al. Expires November 9, 2012 [Page 1]
Internet-Draft JSON Web Token (JWT) May 2012
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 9, 2012.
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Jones, et al. Expires November 9, 2012 [Page 2]
Internet-Draft JSON Web Token (JWT) May 2012
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. JSON Web Token (JWT) Overview . . . . . . . . . . . . . . . . 5
3.1. Example JWT . . . . . . . . . . . . . . . . . . . . . . . 5
4. JWT Claims . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1. Reserved Claim Names . . . . . . . . . . . . . . . . . . . 7
4.2. Public Claim Names . . . . . . . . . . . . . . . . . . . . 9
4.3. Private Claim Names . . . . . . . . . . . . . . . . . . . 9
5. JWT Header . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. Plaintext JWTs . . . . . . . . . . . . . . . . . . . . . . . . 11
6.1. Example Plaintext JWT . . . . . . . . . . . . . . . . . . 11
7. Rules for Creating and Validating a JWT . . . . . . . . . . . 12
8. Cryptographic Algorithms . . . . . . . . . . . . . . . . . . . 14
9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15
9.1. JSON Web Token Claims Registry . . . . . . . . . . . . . . 15
9.2. Sub-Namespace Registration of
urn:ietf:params:oauth:token-type:jwt . . . . . . . . . . . 15
9.3. Registration of application/jwt MIME Media Type . . . . . 15
10. Security Considerations . . . . . . . . . . . . . . . . . . . 17
10.1. Unicode Comparison Security Issues . . . . . . . . . . . . 17
11. Open Issues and Things To Be Done (TBD) . . . . . . . . . . . 18
12. References . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12.1. Normative References . . . . . . . . . . . . . . . . . . . 18
12.2. Informative References . . . . . . . . . . . . . . . . . . 19
Appendix A. Relationship of JWTs to SAML Tokens . . . . . . . . . 20
Appendix B. Relationship of JWTs to Simple Web Tokens (SWTs) . . 20
Appendix C. Acknowledgements . . . . . . . . . . . . . . . . . . 21
Appendix D. Document History . . . . . . . . . . . . . . . . . . 21
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 23
Jones, et al. Expires November 9, 2012 [Page 3]
Internet-Draft JSON Web Token (JWT) May 2012
1. Introduction
JSON Web Token (JWT) is a compact token format intended for space
constrained environments such as HTTP Authorization headers and URI
query parameters. JWTs encode claims to be transmitted as a JSON
object (as defined in RFC 4627 [RFC4627]) that is base64url encoded
and digitally signed or HMACed and/or encrypted. Signing and HMACing
is performed using JSON Web Signature (JWS) [JWS]. Encryption is
performed using JSON Web Encryption (JWE) [JWE].
The suggested pronunciation of JWT is the same as the English word
"jot".
2. Terminology
JSON Web Token (JWT) A string consisting of multiple parts, the
first being the Encoded JWT Header, plus additional parts
depending upon the contents of the header, with the parts being
separated by period ('.') characters, and each part containing
base64url encoded content.
JWT Header A string representing a JSON object that describes the
cryptographic operations applied to the JWT. When the JWT is
digitally signed or HMACed, the JWT Header is a JWS Header. When
the JWT is encrypted, the JWT Header is a JWE Header.
Header Parameter Names The names of the members within the JWT
Header.
Header Parameter Values The values of the members within the JWT
Header.
JWT Claims Set A string representing a JSON object that contains the
claims conveyed by the JWT. When the JWT is digitally signed or
HMACed, the bytes of the UTF-8 representation of the JWT Claims
Set are base64url encoded to create the Encoded JWS Payload. When
the JWT is encrypted, the bytes of the UTF-8 representation of the
JWT Claims Set are used as the JWE Plaintext.
Claim Names The names of the members of the JSON object represented
by the JWT Claims Set.
Claim Values The values of the members of the JSON object
represented by the JWT Claims Set.
Jones, et al. Expires November 9, 2012 [Page 4]
Internet-Draft JSON Web Token (JWT) May 2012
Encoded JWT Header Base64url encoding of the bytes of the UTF-8 RFC
3629 [RFC3629] representation of the JWT Header.
Base64url Encoding For the purposes of this specification, this term
always refers to the URL- and filename-safe Base64 encoding
described in RFC 4648 [RFC4648], Section 5, with the (non URL-
safe) '=' padding characters omitted, as permitted by Section 3.2.
(See Appendix C of [JWS] for notes on implementing base64url
encoding without padding.)
3. JSON Web Token (JWT) Overview
JWTs represent a set of claims as a JSON object that is base64url
encoded and digitally signed or HMACed and/or encrypted. The JWT
Claims Set represents this JSON object. As per RFC 4627 [RFC4627]
Section 2.2, the JSON object consists of zero or more name/value
pairs (or members), where the names are strings and the values are
arbitrary JSON values. These members are the claims represented by
the JWT.
The member names within the JWT Claims Set are referred to as Claim
Names. The corresponding values are referred to as Claim Values.
The bytes of the UTF-8 representation of the JWT Claims Set are
digitally signed or HMACed in the manner described in JSON Web
Signature (JWS) [JWS] and/or encrypted in the manner described in
JSON Web Encryption (JWE) [JWE].
The contents of the JWT Header describe the cryptographic operations
applied to the JWT Claims Set. If the JWT Header is a JWS Header, the
claims are digitally signed or HMACed. If the JWT Header is a JWE
Header, the claims are encrypted.
A JWT is represented as a JWS or JWE. The number of parts is
dependent upon the representation of the resulting JWS or JWE.
3.1. Example JWT
The following example JWT Header declares that the encoded object is
a JSON Web Token (JWT) and the JWT is HMACed using the HMAC SHA-256
algorithm:
{"typ":"JWT",
"alg":"HS256"}
Base64url encoding the bytes of the UTF-8 representation of the JWT
Header yields this Encoded JWS Header value, which is used as the
Encoded JWT Header:
Jones, et al. Expires November 9, 2012 [Page 5]
Internet-Draft JSON Web Token (JWT) May 2012
eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9
The following is an example of a JWT Claims Set:
{"iss":"joe",
"exp":1300819380,
"http://example.com/is_root":true}
Base64url encoding the bytes of the UTF-8 representation of the JSON
Claims Set yields this Encoded JWS Payload (with line breaks for
display purposes only):
eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly
9leGFtcGxlLmNvbS9pc19yb290Ijp0cnVlfQ
Signing the Encoded JWS Header and Encoded JWS Payload with the HMAC
SHA-256 algorithm and base64url encoding the signature in the manner
specified in [JWS], yields this Encoded JWS Signature:
dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk
Concatenating these parts in this order with period characters
between the parts yields this complete JWT (with line breaks for
display purposes only):
eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9
.
eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
.
dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk
This computation is illustrated in more detail in [JWS], Appendix
A.1.
4. JWT Claims
The JWT Claims Set represents a JSON object whose members are the
claims conveyed by the JWT. The Claim Names within this object MUST
be unique. Note however, that the set of claims that a JWT must
contain to be considered valid is context-dependent and is outside
the scope of this specification. When used in a security-related
context, implementations MUST understand and support all of the
claims present; otherwise, the JWT MUST be rejected for processing.
There are three classes of JWT Claim Names: Reserved Claim Names,
Public Claim Names, and Private Claim Names.
Jones, et al. Expires November 9, 2012 [Page 6]
Internet-Draft JSON Web Token (JWT) May 2012
4.1. Reserved Claim Names
The following claim names are reserved. None of the claims defined
in the table below are intended to be mandatory, but rather, provide
a starting point for a set of useful, interoperable claims. All the
names are short because a core goal of JWTs is for the tokens to be
compact.
+-------+--------+-------------+------------------------------------+
| Claim | JSON | Claim | Claim Semantics |
| Name | Value | Syntax | |
| | Type | | |
+-------+--------+-------------+------------------------------------+
| exp | number | IntDate | The "exp" (expiration time) claim |
| | | | identifies the expiration time on |
| | | | or after which the token MUST NOT |
| | | | be accepted for processing. The |
| | | | processing of the "exp" claim |
| | | | requires that the current |
| | | | date/time MUST be before the |
| | | | expiration date/time listed in the |
| | | | "exp" claim. Implementers MAY |
| | | | provide for some small leeway, |
| | | | usually no more than a few |
| | | | minutes, to account for clock |
| | | | skew. This claim is OPTIONAL. |
| nbf | number | IntDate | The "nbf" (not before) claim |
| | | | identifies the time before which |
| | | | the token MUST NOT be accepted for |
| | | | processing. The processing of the |
| | | | "nbf" claim requires that the |
| | | | current date/time MUST be after or |
| | | | equal to the not-before date/time |
| | | | listed in the "nbf" claim. |
| | | | Implementers MAY provide for some |
| | | | small leeway, usually no more than |
| | | | a few minutes, to account for |
| | | | clock skew. This claim is |
| | | | OPTIONAL. |
| iat | number | IntDate | The "iat" (issued at) claim |
| | | | identifies the time at which the |
| | | | JWT was issued. This claim can be |
| | | | used to determine the age of the |
| | | | token. This claim is OPTIONAL. |
Jones, et al. Expires November 9, 2012 [Page 7]
Internet-Draft JSON Web Token (JWT) May 2012
| iss | string | StringOrURI | The "iss" (issuer) claim |
| | | | identifies the principal that |
| | | | issued the JWT. The processing of |
| | | | this claim is generally |
| | | | application specific. The "iss" |
| | | | value is case sensitive. This |
| | | | claim is OPTIONAL. |
| aud | string | StringOrURI | The "aud" (audience) claim |
| | | | identifies the audience that the |
| | | | JWT is intended for. The |
| | | | principal intended to process the |
| | | | JWT MUST be identified with the |
| | | | value of the audience claim. If |
| | | | the principal processing the claim |
| | | | does not identify itself with the |
| | | | identifier in the "aud" claim |
| | | | value then the JWT MUST be |
| | | | rejected. The interpretation of |
| | | | the audience value is generally |
| | | | application specific. The "aud" |
| | | | value is case sensitive. This |
| | | | claim is OPTIONAL. |
| prn | string | StringOrURI | The "prn" (principal) claim |
| | | | identifies the subject of the JWT. |
| | | | The processing of this claim is |
| | | | generally application specific. |
| | | | The "prn" value is case sensitive. |
| | | | This claim is OPTIONAL. |
| jti | string | String | The "jti" (JWT ID) claim provides |
| | | | a unique identifier for the JWT. |
| | | | The identifier value MUST be |
| | | | assigned in a manner that ensures |
| | | | that there is a negligible |
| | | | probability that the same value |
| | | | will be accidentally assigned to a |
| | | | different data object. The "jti" |
| | | | claim can be used to prevent the |
| | | | JWT from being replayed. The |
| | | | "jti" value is case sensitive. |
| | | | This claim is OPTIONAL. |
| typ | string | String | The "typ" (type) claim is used to |
| | | | declare a type for the contents of |
| | | | this JWT Claims Set. The "typ" |
| | | | value is case sensitive. This |
| | | | claim is OPTIONAL. |
+-------+--------+-------------+------------------------------------+
Table 1: Reserved Claim Definitions
Jones, et al. Expires November 9, 2012 [Page 8]
Internet-Draft JSON Web Token (JWT) May 2012
Additional reserved claim names MAY be defined via the IANA JSON Web
Token Claims Registry Section 9.1. The syntax values used above are
defined as follows:
+-------------+-----------------------------------------------------+
| Syntax Name | Syntax Definition |
+-------------+-----------------------------------------------------+
| IntDate | The number of seconds from 1970-01-01T0:0:0Z as |
| | measured in UTC until the desired date/time. See |
| | RFC 3339 [RFC3339] for details regarding date/times |
| | in general and UTC in particular. |
| String | Any string value MAY be used. |
| StringOrURI | Any string value MAY be used but a value containing |
| | a ":" character MUST be a URI as defined in RFC |
| | 3986 [RFC3986]. |
+-------------+-----------------------------------------------------+
Table 2: Claim Syntax Definitions
4.2. Public Claim Names
Claim names can be defined at will by those using JWTs. However, in
order to prevent collisions, any new claim name SHOULD either be
defined in the IANA JSON Web Token Claims Registry Section 9.1 or be
defined as a URI that contains a collision resistant namespace.
Examples of collision resistant namespaces include:
o Domain Names,
o Object Identifiers (OIDs) as defined in the ITU-T X.660 and X.670
Recommendation series, or
o Universally Unique IDentifier (UUID) as defined in RFC 4122
[RFC4122].
In each case, the definer of the name or value needs to take
reasonable precautions to make sure they are in control of the part
of the namespace they use to define the claim name.
4.3. Private Claim Names
A producer and consumer of a JWT may agree to any claim name that is
not a Reserved Name Section 4.1 or a Public Name Section 4.2. Unlike
Public Names, these private names are subject to collision and should
be used with caution.
Jones, et al. Expires November 9, 2012 [Page 9]
Internet-Draft JSON Web Token (JWT) May 2012
5. JWT Header
The members of the JSON object represented by the JWT Header describe
the cryptographic operations applied to the JWT and optionally,
additional properties of the JWT. The member names within the JWT
Header are referred to as Header Parameter Names. These names MUST
be unique. The corresponding values are referred to as Header
Parameter Values.
Implementations MUST understand the entire contents of the header;
otherwise, the JWT MUST be rejected for processing.
There are two ways of distinguishing whether the JWT is a JWS or JWE.
The first is by examining the "alg" (algorithm) header value. If the
value represents a signature algorithm, the JWT is a JWS; if it
represents an encryption algorithm, the JWT is a JWE. A second
method is determining whether an "enc" (encryption method) member
exists. If the "enc" member exists, the JWT is a JWE; otherwise, the
JWT is a JWS. Both methods will yield the same result.
JWS Header Parameters are defined by [JWS]. JWE Header Parameters
are defined by [JWE]. This specification further specifies the use
of the following header parameters in both the cases where the JWT is
a JWS and where it is a JWE.
Jones, et al. Expires November 9, 2012 [Page 10]
Internet-Draft JSON Web Token (JWT) May 2012
+----------+-------+----------+-------------------------------------+
| Header | JSON | Header | Header Parameter Semantics |
| Paramete | Value | Paramete | |
| rName | Type | rSyntax | |
+----------+-------+----------+-------------------------------------+
| typ | strin | String | The "typ" (type) header parameter |
| | g | | is used to declare structural |
| | | | information about the JWT. In the |
| | | | normal case where nested signing or |
| | | | encryption operations are not |
| | | | employed, the use of this header |
| | | | parameter is OPTIONAL, and if |
| | | | present, it is RECOMMENDED that its |
| | | | value be either "JWT" or |
| | | | "urn:ietf:params:oauth:token-type:j |
| | | | wt". In the case that nested |
| | | | signing or encryption steps are |
| | | | employed, the use of this header |
| | | | parameter is REQUIRED; in this |
| | | | case, the value MUST either be |
| | | | "JWS", to indicate that a nested |
| | | | digitally signed or HMACed JWT is |
| | | | carried in this JWT or "JWE", to |
| | | | indicate that a nested encrypted |
| | | | JWT is carried in this JWT. |
+----------+-------+----------+-------------------------------------+
Table 3: Reserved Header Parameter Usage
6. Plaintext JWTs
To support use cases where the JWT content is secured by a means
other than a signature and/or encryption contained within the token
(such as a signature on a data structure containing the token), JWTs
MAY also be created without a signature or encryption. A plaintext
JWT is a JWS using the "none" JWS "alg" header parameter value
defined in JSON Web Algorithms (JWA) [JWA]; it is a JWS with an empty
JWS Signature value.
6.1. Example Plaintext JWT
The following example JWT Header declares that the encoded object is
a Plaintext JWT:
{"alg":"none"}
Base64url encoding the bytes of the UTF-8 representation of the JWT
Header yields this Encoded JWT Header:
Jones, et al. Expires November 9, 2012 [Page 11]
Internet-Draft JSON Web Token (JWT) May 2012
eyJhbGciOiJub25lIn0
The following is an example of a JWT Claims Set:
{"iss":"joe",
"exp":1300819380,
"http://example.com/is_root":true}
Base64url encoding the bytes of the UTF-8 representation of the JSON
Claims Set yields this Encoded JWS Payload (with line breaks for
display purposes only):
eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
The Encoded JWS Signature is the empty string.
Concatenating these parts in this order with period characters
between the parts yields this complete JWT (with line breaks for
display purposes only):
eyJhbGciOiJub25lIn0
.
eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt
cGxlLmNvbS9pc19yb290Ijp0cnVlfQ
.
7. Rules for Creating and Validating a JWT
To create a JWT, one MUST perform these steps. The order of the
steps is not significant in cases where there are no dependencies
between the inputs and outputs of the steps.
1. Create a JWT Claims Set containing the desired claims. Note that
white space is explicitly allowed in the representation and no
canonicalization is performed before encoding.
2. Let the Message be the bytes of the UTF-8 representation of the
JWT Claims Set.
3. Create a JWT Header containing the desired set of header
parameters. The JWT MUST conform to either the [JWS] or [JWE]
specifications. Note that white space is explicitly allowed in
the representation and no canonicalization is performed before
encoding.
4. Base64url encode the bytes of the UTF-8 representation of the JWT
Header. Let this be the Encoded JWT Header.
Jones, et al. Expires November 9, 2012 [Page 12]
Internet-Draft JSON Web Token (JWT) May 2012
5. Depending upon whether the JWT is a JWS or JWE, there are two
cases:
* If the JWT is a JWS, create a JWS using the JWT Header as the
JWS Header and the Message as the JWS Payload; all steps
specified in [JWS] for creating a JWS MUST be followed.
* Else, if the JWT is a JWE, create a JWE using the JWT Header
as the JWE Header and the Message as the JWE Plaintext; all
steps specified in [JWE] for creating a JWE MUST be followed.
6. If a nested signing or encryption operation will be performed,
let the Message be the JWS or JWE, and return to Step 3, using a
"typ" value of either "JWS" or "JWE" respectively in the new JWT
Header created in that step.
7. Otherwise, let the resulting JWT be the JWS or JWE.
When validating a JWT the following steps MUST be taken. The order
of the steps is not significant in cases where there are no
dependencies between the inputs and outputs of the steps. If any of
the listed steps fails then the token MUST be rejected for
processing.
1. The JWT MUST contain at least one period character.
2. Let the Encoded JWT Header be the portion of the JWT before the
first period character.
3. The Encoded JWT Header MUST be successfully base64url decoded
following the restriction given in this specification that no
padding characters have been used.
4. The JWT Header MUST be completely valid JSON syntax conforming
to RFC 4627 [RFC4627].
5. The JWT Header MUST be validated to only include parameters and
values whose syntax and semantics are both understood and
supported.
6. Determine whether the JWT is a JWS or a JWE by examining the
"alg" (algorithm) header value and optionally, the "enc"
(encryption method) header value, if present.
7. Depending upon whether the JWT is a JWS or JWE, there are two
cases:
Jones, et al. Expires November 9, 2012 [Page 13]
Internet-Draft JSON Web Token (JWT) May 2012
* If the JWT is a JWS, all steps specified in [JWS] for
validating a JWS MUST be followed. Let the Message be the
result of base64url decoding the JWS Payload.
* Else, if the JWT is a JWE, all steps specified in [JWE] for
validating a JWE MUST be followed. Let the Message be the
JWE Plaintext.
8. If the JWT Header contains a "typ" value of either "JWS" or
"JWE", then the Message contains a JWT that was the subject of
nested signing or encryption operations, respectively. In this
case, return to Step 1, using the Message as the JWT.
9. Otherwise, let the JWT Claims Set be the Message.
10. The JWT Claims Set MUST be completely valid JSON syntax
conforming to RFC 4627 [RFC4627].
11. When used in a security-related context, the JWT Claims Set MUST
be validated to only include claims whose syntax and semantics
are both understood and supported.
Processing a JWT inevitably requires comparing known strings to
values in the token. For example, in checking what the algorithm is,
the Unicode string encoding "alg" will be checked against the member
names in the JWT Header to see if there is a matching header
parameter name. A similar process occurs when determining if the
value of the "alg" header parameter represents a supported algorithm.
Comparisons between JSON strings and other Unicode strings MUST be
performed as specified below:
1. Remove any JSON applied escaping to produce an array of Unicode
code points.
2. Unicode Normalization [USA15] MUST NOT be applied at any point to
either the JSON string or to the string it is to be compared
against.
3. Comparisons between the two strings MUST be performed as a
Unicode code point to code point equality comparison.
8. Cryptographic Algorithms
JWTs use JSON Web Signature (JWS) [JWS] and JSON Web Encryption (JWE)
[JWE] to sign and/or encrypt the contents of the JWT.
Jones, et al. Expires November 9, 2012 [Page 14]
Internet-Draft JSON Web Token (JWT) May 2012
Of the JWS signing algorithms, only HMAC SHA-256 and "none" MUST be
implemented by conforming JWT implementations. It is RECOMMENDED
that implementations also support the RSA SHA-256 and ECDSA P-256
SHA-256 algorithms. Support for other algorithms and key sizes is
OPTIONAL.
If an implementation provides encryption capabilities, of the JWE
encryption algorithms, only RSA-PKCS1-1.5 with 2048 bit keys, AES-
128-CBC, and AES-256-CBC MUST be implemented by conforming
implementations. It is RECOMMENDED that implementations also support
ECDH-ES with 256 bit keys, AES-128-GCM, and AES-256-GCM. Support for
other algorithms and key sizes is OPTIONAL.
9. IANA Considerations
9.1. JSON Web Token Claims Registry
The IANA registry entitled "JSON Web Token Claims" for reserved JWT
claim names is defined in Section 4.1. Inclusion in the registry is
RFC Required in the RFC 5226 [RFC5226] sense for reserved JWT claim
names that are intended to be interoperable between implementations.
The registry will just record the reserved claim name and a pointer
to the RFC that defines it. This specification defines inclusion of
the claim names defined in Section 4.1.
9.2. Sub-Namespace Registration of urn:ietf:params:oauth:token-type:jwt
This is a request to IANA to register the value "token-type:jwt" in
the registry urn:ietf:params:oauth established in An IETF URN Sub-
Namespace for OAuth [I-D.ietf-oauth-urn-sub-ns].
o URN: urn:ietf:params:oauth:token-type:jwt
o Common Name: JSON Web Token (JWT) Token Type
o Change controller: IETF
o Description: [[this document]]
9.3. Registration of application/jwt MIME Media Type
This specification registers the "application/jwt" MIME Media Type.
Type name:
application
Jones, et al. Expires November 9, 2012 [Page 15]
Internet-Draft JSON Web Token (JWT) May 2012
Subtype name:
jwt
Required parameters:
n/a
Optional parameters:
n/a
Encoding considerations:
n/a
Security considerations:
See the Security Considerations section of this document
Interoperability considerations:
n/a
Published specification:
[[ this document ]]
Applications that use this media type:
OpenID Connect, Mozilla Browser ID, Salesforce, Google, numerous
others
Additional information:
Magic number(s): n/a
File extension(s): n/a
Macintosh file type code(s): n/a
Person & email address to contact for further information:
Michael B. Jones
mbj@microsoft.com
Intended usage:
COMMON
Restrictions on usage:
none
Author:
Michael B. Jones
mbj@microsoft.com
Change controller:
Michael B. Jones
mbj@microsoft.com
Jones, et al. Expires November 9, 2012 [Page 16]
Internet-Draft JSON Web Token (JWT) May 2012
10. Security Considerations
TBD: Lots of work to do here. We need to remember to look into any
issues relating to security and JSON parsing. One wonders just how
secure most JSON parsing libraries are. Were they ever hardened for
security scenarios? If not, what kind of holes does that open up?
Also, we need to walk through the JSON standard and see what kind of
issues we have especially around comparison of names. For instance,
comparisons of claim names and other parameters must occur after they
are unescaped. Need to also put in text about: Importance of keeping
secrets secret. Rotating keys. Strengths and weaknesses of the
different algorithms.
TBD: Need to put in text about why strict JSON validation is
necessary. Basically, that if malformed JSON is received then the
intent of the sender is impossible to reliably discern. One example
of malformed JSON that MUST be rejected is an object in which the
same member name occurs multiple times. While in non-security
contexts it's o.k. to be generous in what one accepts, in security
contexts this can lead to serious security holes. For example,
malformed JSON might indicate that someone has managed to find a
security hole in the issuer's code and is leveraging it to get the
issuer to issue "bad" tokens whose content the attacker can control.
TBD: Write about the need to secure the token content if a signature
is not contained in the JWT itself.
10.1. Unicode Comparison Security Issues
Claim names in JWTs are Unicode strings. For security reasons, the
representations of these names must be compared verbatim after
performing any escape processing (as per RFC 4627 [RFC4627], Section
2.5).
This means, for instance, that these JSON strings must compare as
being equal ("JWT", "\u004aWT"), whereas these must all compare as
being not equal to the first set or to each other ("jwt", "Jwt",
"JW\u0074").
JSON strings MAY contain characters outside the Unicode Basic
Multilingual Plane. For instance, the G clef character (U+1D11E) may
be represented in a JSON string as "\uD834\uDD1E". Ideally, JWT
implementations SHOULD ensure that characters outside the Basic
Multilingual Plane are preserved and compared correctly;
alternatively, if this is not possible due to these characters
exercising limitations present in the underlying JSON implementation,
then input containing them MUST be rejected.
Jones, et al. Expires November 9, 2012 [Page 17]
Internet-Draft JSON Web Token (JWT) May 2012
11. Open Issues and Things To Be Done (TBD)
The following items remain to be done in this draft:
o EDITORIAL: Give each claim name and header parameter definition
its own section. This will let them appear in the index, will
give space for examples when needed, and will get rid of the way-
too-cramped tables.
o Add normative text that requires rejecting headers and Claim Sets
in which member names occur multiple times, as apparently this is
legal JSON.
o Provide an example of an encrypted JWT.
o Clarify the intended use of the "typ" Header Parameter across the
JWS, JWE, and JWT specifications. Decide whether a registry of
"typ" values is appropriate.
o EDITORIAL: Think about how to best describe the concept currently
described as "the bytes of the UTF-8 representation of". Possible
terms to use instead of "bytes of" include "byte sequence", "octet
series", and "octet sequence". Also consider whether we want to
add an overall clarifying statement somewhere in each spec
something like "every place we say 'the UTF-8 representation of
X', we mean 'the bytes of the UTF-8 representation of X'". That
would potentially allow us to omit the "the bytes of" part
everywhere else.
o Finish the Security Considerations section.
o Possibly write a companion specification that uses the JWS and JWE
JSON Serializations.
12. References
12.1. Normative References
[I-D.ietf-oauth-urn-sub-ns]
Tschofenig, H., "An IETF URN Sub-Namespace for OAuth",
draft-ietf-oauth-urn-sub-ns-02 (work in progress),
January 2012.
[JWA] Jones, M., "JSON Web Algorithms (JWA)", March 2012.
[JWE] Jones, M., Rescorla, E., and J. Hildebrand, "JSON Web
Encryption (JWE)", March 2012.
Jones, et al. Expires November 9, 2012 [Page 18]
Internet-Draft JSON Web Token (JWT) May 2012
[JWS] Jones, M., Bradley, J., and N. Sakimura, "JSON Web
Signature (JWS)", March 2012.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC3339] Klyne, G., Ed. and C. Newman, "Date and Time on the
Internet: Timestamps", RFC 3339, July 2002.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, November 2003.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, January 2005.
[RFC4627] Crockford, D., "The application/json Media Type for
JavaScript Object Notation (JSON)", RFC 4627, July 2006.
[RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data
Encodings", RFC 4648, October 2006.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008.
[USA15] Davis, M., Whistler, K., and M. Duerst, "Unicode
Normalization Forms", Unicode Standard Annex 15, 09 2009.
12.2. Informative References
[CanvasApp]
Facebook, "Canvas Applications", 2010.
[JSS] Bradley, J. and N. Sakimura (editor), "JSON Simple Sign",
September 2010.
[MagicSignatures]
Panzer (editor), J., Laurie, B., and D. Balfanz, "Magic
Signatures", January 2011.
[OASIS.saml-core-2.0-os]
Cantor, S., Kemp, J., Philpott, R., and E. Maler,
"Assertions and Protocol for the OASIS Security Assertion
Markup Language (SAML) V2.0", OASIS Standard saml-core-
2.0-os, March 2005.
[RFC3275] Eastlake, D., Reagle, J., and D. Solo, "(Extensible Markup
Jones, et al. Expires November 9, 2012 [Page 19]
Internet-Draft JSON Web Token (JWT) May 2012
Language) XML-Signature Syntax and Processing", RFC 3275,
March 2002.
[RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally
Unique IDentifier (UUID) URN Namespace", RFC 4122,
July 2005.
[SWT] Hardt, D. and Y. Goland, "Simple Web Token (SWT)",
Version 0.9.5.1, November 2009.
[W3C.CR-xml11-20021015]
Cowan, J., "Extensible Markup Language (XML) 1.1", W3C
CR CR-xml11-20021015, October 2002.
Appendix A. Relationship of JWTs to SAML Tokens
SAML 2.0 [OASIS.saml-core-2.0-os] provides a standard for creating
tokens with much greater expressivity and more security options than
supported by JWTs. However, the cost of this flexibility and
expressiveness is both size and complexity. In addition, SAML's use
of XML [W3C.CR-xml11-20021015] and XML DSIG [RFC3275] only
contributes to the size of SAML tokens.
JWTs are intended to provide a simple token format that is small
enough to fit into HTTP headers and query arguments in URIs. It does
this by supporting a much simpler token model than SAML and using the
JSON [RFC4627] object encoding syntax. It also supports securing
tokens using Hash-based Message Authentication Codes (HMACs) and
digital signatures using a smaller (and less flexible) format than
XML DSIG.
Therefore, while JWTs can do some of the things SAML tokens do, JWTs
are not intended as a full replacement for SAML tokens, but rather as
a compromise token format to be used when space is at a premium.
Appendix B. Relationship of JWTs to Simple Web Tokens (SWTs)
Both JWTs and Simple Web Tokens SWT [SWT], at their core, enable sets
of claims to be communicated between applications. For SWTs, both
the claim names and claim values are strings. For JWTs, while claim
names are strings, claim values can be any JSON type. Both token
types offer cryptographic protection of their content: SWTs with HMAC
SHA-256 and JWTs with a choice of algorithms, including HMAC SHA-256,
RSA SHA-256, and ECDSA P-256 SHA-256.
Jones, et al. Expires November 9, 2012 [Page 20]
Internet-Draft JSON Web Token (JWT) May 2012
Appendix C. Acknowledgements
The authors acknowledge that the design of JWTs was intentionally
influenced by the design and simplicity of Simple Web Tokens [SWT]
and ideas for JSON tokens that Dick Hardt discussed within the OpenID
community.
Solutions for signing JSON content were previously explored by Magic
Signatures [MagicSignatures], JSON Simple Sign [JSS], and Canvas
Applications [CanvasApp], all of which influenced this draft.
Appendix D. Document History
-09
o Changed "http://openid.net/specs/jwt/1.0" to
"urn:ietf:params:oauth:token-type:jwt" in preparation for OAuth WG
draft.
-08
o Removed language that required that a JWT must have three parts.
Now the number of parts is explicitly dependent upon the
representation of the underlying JWS or JWE.
o Moved the "alg":"none" definition to the JWS spec.
o Registered the "application/jwt" MIME Media Type.
o Clarified that the order of the creation and validation steps is
not significant in cases where there are no dependencies between
the inputs and outputs of the steps.
o Corrected the Magic Signatures and Simple Web Token (SWT)
references.
-07
o Defined the "prn" (principal) claim to identify the subject of the
JWT.
o Defined the "jti" (JWT ID) claim to enable replay protection.
o Use the term "JWT Claims Set" rather than "JWT Claims Object"
since this is actually a string representing a JSON object and not
the JSON object itself.
Jones, et al. Expires November 9, 2012 [Page 21]
Internet-Draft JSON Web Token (JWT) May 2012
o Moved "MUST" requirements from the Overview to later in the spec.
o Respect line length restrictions in examples.
o Applied other editorial improvements.
-06
o Reference and use content from [JWS] and [JWE], rather than
repeating it here.
o Simplified terminology to better match JWE, where the terms "JWT
Header" and "Encoded JWT Header" are now used, for instance,
rather than the previous terms "Decoded JWT Header Segment" and
"JWT Header Segment". Also changed to "Plaintext JWT" from
"Unsigned JWT".
o Describe how to perform nested encryption and signing operations.
o Changed "integer" to "number", since that is the correct JSON
type.
o Changed StringAndURI to StringOrURI.
-05
o Added the "nbf" (not before) claim and clarified the meaning of
the "iat" (issued at) claim.
-04
o Correct typo found by John Bradley: "the JWT Claim Segment is the
empty string" -> "the JWT Crypto Segment is the empty string".
-03
o Added "http://openid.net/specs/jwt/1.0" as a token type identifier
URI for JWTs.
o Added "iat" (issued at) claim.
o Changed RSA SHA-256 from MUST be supported to RECOMMENDED that it
be supported. Rationale: Several people have objected to the
requirement for implementing RSA SHA-256, some because they will
only be using HMACs and symmetric keys, and others because they
only want to use ECDSA when using asymmetric keys, either for
security or key length reasons, or both.
Jones, et al. Expires November 9, 2012 [Page 22]
Internet-Draft JSON Web Token (JWT) May 2012
o Defined "alg" value "none" to represent unsigned JWTs.
-02
o Split signature specification out into separate
draft-jones-json-web-signature-00. This split introduced no
semantic changes.
o The JWT Compact Serialization is now the only token serialization
format specified in this draft. The JWT JSON Serialization can
continue to be defined in a companion specification.
-01
o Draft incorporating consensus decisions reached at IIW.
-00
o Public draft published before November 2010 IIW based upon the
JSON token convergence proposal incorporating input from several
implementers of related specifications.
Authors' Addresses
Michael B. Jones
Microsoft
Email: mbj@microsoft.com
URI: http://self-issued.info/
Dirk Balfanz
Google
Email: balfanz@google.com
John Bradley
independent
Email: ve7jtb@ve7jtb.com
Jones, et al. Expires November 9, 2012 [Page 23]
Internet-Draft JSON Web Token (JWT) May 2012
Yaron Y. Goland
Microsoft
Email: yarong@microsoft.com
John Panzer
Google
Email: jpanzer@google.com
Nat Sakimura
Nomura Research Institute
Email: n-sakimura@nri.co.jp
Paul Tarjan
Facebook
Email: pt@fb.com
Jones, et al. Expires November 9, 2012 [Page 24]