XMPP                                                           M. Miller
Internet-Draft                                       Cisco Systems, Inc.
Intended status: Standards Track                              C. Wallace
Expires: January 5, 2015                        Red Hound Software, Inc.
                                                            July 4, 2014


End-to-End Object Encryption and Signatures for the Extensible Messaging
                      and Presence Protocol (XMPP)
                        draft-miller-xmpp-e2e-07

Abstract

   This document defines two methods for securing objects (often
   referred to as stanzas) for the Extensible Messaging and Presence
   Protocol (XMPP), which allows for efficient asynchronous
   communication between two entities, each with might have multiple
   devices operating simultaneously.  One is a method to encrypt stanzas
   to provide confidentiality protection; another is a method to sign
   stanzas to provide authentication and integrity protection.  This
   document also defines a related protocol for entities to request the
   ephemeral session keys in use.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 5, 2015.

Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of



Miller & Wallace         Expires January 5, 2015                [Page 1]


Internet-Draft                  XMPP E2E                       July 2014


   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   4
   3.  Changes to existing clients . . . . . . . . . . . . . . . . .   4
     3.1.  End-point procedures  . . . . . . . . . . . . . . . . . .   4
     3.2.  End-point state . . . . . . . . . . . . . . . . . . . . .   5
   4.  Key distribution  . . . . . . . . . . . . . . . . . . . . . .   6
   5.  Key table . . . . . . . . . . . . . . . . . . . . . . . . . .   8
   6.  Encryption  . . . . . . . . . . . . . . . . . . . . . . . . .  10
     6.1.  Determining Support . . . . . . . . . . . . . . . . . . .  10
     6.2.  Encrypting XMPP Stanzas . . . . . . . . . . . . . . . . .  10
       6.2.1.  Prerequisites . . . . . . . . . . . . . . . . . . . .  10
       6.2.2.  Process . . . . . . . . . . . . . . . . . . . . . . .  11
     6.3.  Decrypting XMPP Stanzas . . . . . . . . . . . . . . . . .  13
       6.3.1.  Protocol Not Understood . . . . . . . . . . . . . . .  13
       6.3.2.  Process . . . . . . . . . . . . . . . . . . . . . . .  13
       6.3.3.  Insufficient Information  . . . . . . . . . . . . . .  15
       6.3.4.  Failed Decryption . . . . . . . . . . . . . . . . . .  15
       6.3.5.  Timestamp Not Acceptable  . . . . . . . . . . . . . .  16
       6.3.6.  Successful Decryption . . . . . . . . . . . . . . . .  17
     6.4.  Example - Securing a Message  . . . . . . . . . . . . . .  17
   7.  Signatures  . . . . . . . . . . . . . . . . . . . . . . . . .  21
     7.1.  Determining Support . . . . . . . . . . . . . . . . . . .  21
     7.2.  Signing XMPP Stanzas  . . . . . . . . . . . . . . . . . .  22
       7.2.1.  Process . . . . . . . . . . . . . . . . . . . . . . .  22
     7.3.  Verifying Signed XMPP Stanzas . . . . . . . . . . . . . .  24
       7.3.1.  Protocol Not Understood . . . . . . . . . . . . . . .  24
       7.3.2.  Process . . . . . . . . . . . . . . . . . . . . . . .  24
       7.3.3.  Insufficient Information  . . . . . . . . . . . . . .  25
       7.3.4.  Failed Verification . . . . . . . . . . . . . . . . .  26
       7.3.5.  Timestamp Not Acceptable  . . . . . . . . . . . . . .  26
       7.3.6.  Successful Verification . . . . . . . . . . . . . . .  27
     7.4.  Example - Signing a Message . . . . . . . . . . . . . . .  27
   8.  Requesting Session Keys . . . . . . . . . . . . . . . . . . .  30
     8.1.  Request Process . . . . . . . . . . . . . . . . . . . . .  30
     8.2.  Accept Process  . . . . . . . . . . . . . . . . . . . . .  31
     8.3.  Error Conditions  . . . . . . . . . . . . . . . . . . . .  33
     8.4.  Example of Successful Key Request . . . . . . . . . . . .  34
   9.  Mulitple Operations . . . . . . . . . . . . . . . . . . . . .  38
   10. Inclusion and Checking of Timestamps  . . . . . . . . . . . .  38



Miller & Wallace         Expires January 5, 2015                [Page 2]


Internet-Draft                  XMPP E2E                       July 2014


   11. Interaction with Stanza Semantics . . . . . . . . . . . . . .  39
   12. Interaction with Offline Storage  . . . . . . . . . . . . . .  40
   13. Mandatory-to-Implement Cryptographic Algorithms . . . . . . .  40
   14. Security Considerations . . . . . . . . . . . . . . . . . . .  40
     14.1.  Storage of Encrypted Stanzas . . . . . . . . . . . . . .  40
     14.2.  Re-use of Session Master Keys  . . . . . . . . . . . . .  40
   15. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  41
     15.1.  XML Namespaces Name for e2e Data in XMPP . . . . . . . .  41
   16. References  . . . . . . . . . . . . . . . . . . . . . . . . .  42
     16.1.  Normative References . . . . . . . . . . . . . . . . . .  42
     16.2.  Informative References . . . . . . . . . . . . . . . . .  43
   Appendix A.  Schema for urn:ietf:params:xml:ns:xmpp-e2e:6 . . . .  43
   Appendix B.  Acknowledgements . . . . . . . . . . . . . . . . . .  46
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  46

1.  Introduction

   End-to-end protection and authentication of traffic sent over the
   Extensible Messaging and Presence Protocol [RFC6120] is a desirable
   goal.  Requirements and a threat analysis for XMPP encryption are
   provided in [E2E-REQ].  Many possible approaches to meet those (or
   similar) requirements have been proposed over the years, including
   methods based on PGP, S/MIME, SIGMA, and TLS.

   Most proposals have not been able to support multiple end-points for
   a given recipient.  As more devices support XMPP, it becomes more
   desirable to allow an entity to communicate with another in a more
   secure manner, regardless of the number of agents the entity is
   employing.  This document specifies an approach for encrypting and
   signing communications between two entities which each might have
   multiple end-points.

   A primary challenge with supporting multiple end-points is key
   distribution.  This is complicated by the fact that some end points
   for a given recipient may share keys, some may use different keys,
   some may have no keys and some may not support encryption or
   signature verification at all.  To address these differences, this
   specification defines a symmetric key table that is managed via three
   mechanisms that enable a key to be pushed to an end point, to be
   pulled from an originator or negotiated.  The key table contains
   named master keys along with meta data describing usage of the key.
   Encrypted XMPP messages use a named master key to encrypt a content
   encryption key.  Prior to decrypting a message, recipients of an
   encrypted message will either find the named key present in their key
   table (as the result of an earlier operation) or obtain the key from
   the sender.





Miller & Wallace         Expires January 5, 2015                [Page 3]


Internet-Draft                  XMPP E2E                       July 2014


   Comments are solicited and should be addressed to XMPP mailing list.
   Information about the XMPP mailing list can be found here:
   https://www.ietf.org/mailman/listinfo/xmpp.

2.  Terminology

   This document inherits XMPP-related terminology from [RFC6120], JSON
   Web Algorithms (JWA)-related terminology from [JOSE-JWA], JSON Web
   Encryption (JWE)-related terminology from [JOSE-JWE], and JSON Web
   Key (JWK)-related terminology from [JOSE-JWK].  Security-related
   terms are to be understood in the sense defined in [RFC4949].

   The capitalized key words "MUST", "MUST NOT", "REQUIRED", "SHALL",
   "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   [RFC2119].

3.  Changes to existing clients

3.1.  End-point procedures

   Existing XMPP clients will need to implement some new procedures in
   order to support end-to-end encryption and authentication.  Changes
   for sending clients include:

   o  Generating session master keys (SMKs)

   o  Storing SMKs for use during active sessions

   o  Storing SMKs to provide to peers and to support reading of saved
      messages (may require use of storage key)

   o  Accepting requests for SMKs

   o  Releasing SMKs to authorized requestors (where requests may be
      received from multiple different resources associated with a
      single peer with each resource using a different means to
      authenticate)

   o  Generating content encryption keys (CEK)

   o  Using SMK and CEK values to encrypt XMPP stanzas

   o  Generating a signing key (optional)

   o  Using a signing key to sign XMPP stanzas

   o  Generating and using a long term storage key (optional)



Miller & Wallace         Expires January 5, 2015                [Page 4]


Internet-Draft                  XMPP E2E                       July 2014


   Changes for receiving clients include:

   o  Sending requests for SMKs to peers

   o  Accepting public key to use when encrypting an SMK from peers

   o  Storing SMKs for use when decrypting XMPP stanzas during active
      session

   o  Using an SMK to decrypt a CEK used to decrypt XMPP stanzas

   o  Storing SMKs retrieved from peers to support reading of saved
      messages (may require use of storage key)

   o  Providing indication to users when encryption is in use

   o  Retrieving keys required to verify signatures on signed XMPP
      stanzas

   o  Verifying signatures and displaying indication of success/failure
      to user

   o  Storing keys required to verify signature to support reading of
      saved messages (may require use of storage key)

   o  Generating and using a long term storage key (optional)

3.2.  End-point state

   End points utilizing end-to-end encryption and signatures are
   required to maintain some new state information, and may find some
   additional information helpful to maintain.  New state information
   includes:

   o  Session master key table (required)

   o  Public/private key store (required)

   o  Trust anchor store (optional)

   o  Intermediate certification authority (CA) store (optional)

   o  Long-term storage key (optional)

   Session master keys (SMKs) are used to encrypt XMPP stanzas.  An end-
   point may have many active SMKs at any given point in time, but only
   one SMK active per bare JID (TODO: or should this be per full JID?).
   Each SMK has a name generated by the entity who generated the key.



Miller & Wallace         Expires January 5, 2015                [Page 5]


Internet-Draft                  XMPP E2E                       July 2014


   The name MUST be unique from the generator's perspective (i.e., full
   JID + SMK name MUST uniquely identify a specific SMK).  When a new
   SMK is received, any previous SMK stored for the full JID of the
   entity providing the SMK may be destroyed.  Alternatively, previous
   SMKs may be preserved to support future decryption of stored
   messages.  This specification places no requirements on handling of
   stored messages.  Clients may re-encrypt messages under a long-term
   storage key, store messages as-is encrypted using an SMK or store
   plaintext messages.

   Each end-point must have at least one public/private key pair used
   for SMK distribution.

   A trust anchor store or intermediate CA store may be useful to
   support automated release of encrypted SMKs or to verify signed XMPP
   stanzas.

   A long-term storage key may be used to either encrypt data stored in
   the key table or to re-encrypt encrypted messages prior to storing
   the message for future review.

4.  Key distribution

   Several different types of keys are used to support end-to-end
   encryption and signatures.  These keys may be distinct from any keys
   used to authenticate to XMPP servers and include the following:

   o  Session master key (SMK)

   o  Content encryption keys (CEKs) for XMPP stanzas

   o  Public/private key pair for SMK distribution

   o  Content encryption keys for SMK distribution

   o  Public/private key pair for signature generation

   o  Trust anchor and intermediate certification authority (CA) public
      keys

   o  Long-term storage key

   SMKs are symmetric keys generated by an end-point prior to utilizing
   end-to-end encryption (see Section 6.2.1).  SMKs are used to encrypt
   the CEK used to encrypt an XMPP stanza.  SMKs are stored in the SMK
   table and may be distributed using one of the following mechanisms:





Miller & Wallace         Expires January 5, 2015                [Page 6]


Internet-Draft                  XMPP E2E                       July 2014


   o  Manually pre-placed at some point prior to using end-to-end
      encryption

   o  Released to an end-point upon request after receiving an encrypted
      XMPP stanza

   o  Provided to an end-point using an IQ stanza sent prior to sending
      encrypted XMPP stanzas

   CEKs for XMPP stanzas are symmetric keys generated by an end-point to
   encrypt an XMPP stanza (see item 5 in Section 6.2.2).  CEKs are
   encrypted using the SMK and included with encrypted XMPP data.

   Public/private key pairs for SMK distribution are asymmetric keys
   that may be generated by an end point, imported into an end point or
   used via a hardware cryptographic module.  The public key is
   distributed to XMPP peers for use when distributing SMKs (see step 1
   in Section 8.1).  The public key is formatted as a JWK, which may
   include an X.509 certificate.  An end-point MUST establish trust in a
   public key prior to releasing an SMK value.  Trust establishment
   mechanisms include checking a key thumbprint provided via a trusted
   channel or by validating an X.509 certificate to a trust anchor.  The
   public keys may be distributed using one of the following mechanisms:

   o  Manually pre-placed prior to using for SMK release (details for
      manual pre-placement are not defined by this specification)

   o  Presented when requesting an SMK from a peer after receiving an
      encrypted XMPP stanza from the peer (the peer may store the public
      key for use in providing future encrypted SMK values prior to
      using the SMK to encrypt XMPP stanzas see Section 8.1)

   o  Provided upon request in response to an IQ get request in
      preparation for receiving encrypted XMPP stanzas (TODO: define IQ
      for pushing SMK)

   CEKs for SMK distribution are symmetric keys generated by an end-
   point to encrypt an SMK (see item 3 in Section 8.2).  CEKs are
   encrypted using the public key used for SMK distribution and included
   with encrypted SMK data.

   Public/private key pairs for SMK distribution are asymmetric keys
   that may be generated by an end point, imported into an end point or
   used via a hardware cryptographic module (see bullet 4 of section 5.1
   in [JOSE-JWE]).  The public key is distributed to XMPP peers for use
   when verifying signatures.  Trust establishment may be performed by
   checking a key thumbprint provided via a trusted channel or by
   validating an X.509 certificate to a trust anchor.



Miller & Wallace         Expires January 5, 2015                [Page 7]


Internet-Draft                  XMPP E2E                       July 2014


   Trust anchor and intermediate CA public keys may be used to validate
   X.509 certificates in support of SMK release or verification of
   signatures on signed XMPP stanzas.

   A long-term storage key may be used to encrypt information stored in
   the key table or to re-encrypt encrypted messages prior to storing
   the message for future review.  The long-term storage key may be a
   public/private key pair or a symmetric key.

5.  Key table

   The conceptual database for long-lived cryptographic keys described
   in [Key-Table] may be suitable for use in storing the SMKs described
   above for use in supporting end-to-end XMPP encryption.  The columns
   that the table consists of are listed as follows:

   TODO: figure out whether to read time values from JWKs.  If so,
   augment section 8.2.

   AdminKeyName:  The AdminKeyName field contains a human-readable
         string meant to identify the key for the user.  Implementations
         can use this field to uniquely identify rows in the key table.
         The same string can be used on the local system and peer
         systems, but this is not required.

   LocalKeyName:  The LocalKeyName field contains a string identifying
         the key.  It can be used to retrieve the key in the local
         database when received in a message.  For SMKs, this is the
         value of the 'id' attribute value of the <e2e/> element (see
         Section 6.3).

   PeerKeyName:  PeerKeyName is not used as the name is the same at each
         end point.

   Peers:  This field lists the full JID of each peer systems that has
         this key in their database.  The peer name is read from the
         'from' attribute of the wrapping stanza (see Section 6.3).

   Interfaces:  This field is not used and must be set to "all".

   Protocol:  The Protocol field identifies XMPP the protocol where this
         key may be used to provide cryptographic protection.  (TODO:
         registry entry for the protocol?)

   ProtocolSpecificInfo:  This field is not used and must be be empty.

   KDF:  The KDF field is not used and must be set to "none".  (TODO:
         define a use for this field?)



Miller & Wallace         Expires January 5, 2015                [Page 8]


Internet-Draft                  XMPP E2E                       July 2014


   AlgID:  The AlgID field indicates which cryptographic algorithm to be
         used with the security protocol for the specified peer or
         peers.  Such an algorithm can be an encryption algorithm and
         mode (e.g., AES-128-CBC), an authentication algorithm (e.g.,
         HMAC-SHA1-96 or AES-128-CMAC), or any other symmetric
         cryptographic algorithm needed by a security protocol.  (TODO:
         identify source for algorithm strings)

   Key:  The Key field contains a long-lived symmetric cryptographic key
         in the format of a lower-case hexadecimal string.  The size of
         the Key depends on the KDF and the AlgID.  For instance, a
         KDF=none and AlgID=AES128 requires a 128-bit key, which is
         represented by 32 hexadecimal digits.

   Direction:  The Direction field indicates whether this key may be
         used for inbound traffic, outbound traffic, both, or whether
         the key has been disabled and may not currently be used at all.
         The supported values are "in", "out", "both", and "disabled",
         respectively.

   SendLifetimeStart:  The SendLifetimeStart field specifies the
         earliest date and time in Coordinated Universal Time (UTC) at
         which this key should be considered for use when sending
         traffic.  The format is YYYYMMDDHHSSZ, where four digits
         specify the year, two digits specify the month, two digits
         specify the day, two digits specify the hour, two digits
         specify the minute, and two digits specify the second.  The "Z"
         is included as a clear indication that the time is in UTC.

   SendLifeTimeEnd:  The SendLifeTimeEnd field specifies the latest date
         and time at which this key should be considered for use when
         sending traffic.  The format is the same as the
         SendLifetimeStart field.

   AcceptLifeTimeStart:  The AcceptLifeTimeStart field specifies the
         earliest date and time in Coordinated Universal Time (UTC) at
         which this key should be considered for use when processing
         received traffic.  The format is YYYYMMDDHHSSZ, where four
         digits specify the year, two digits specify the month, two
         digits specify the day, two digits specify the hour, two digits
         specify the minute, and two digits specify the second.  The "Z"
         is included as a clear indication that the time is in UTC.

   AcceptLifeTimeEnd:  The AcceptLifeTimeEnd field specifies the latest
         date and time at which this key should be considered for use
         when processing the received traffic.  The format of this field
         is identical to the format of AcceptLifeTimeStart.




Miller & Wallace         Expires January 5, 2015                [Page 9]


Internet-Draft                  XMPP E2E                       July 2014


6.  Encryption

6.1.  Determining Support

   If an agent supports receiving end-to-end object encryption, it MUST
   advertise that fact in its responses to [XEP-0030] information
   ("disco#info") requests by returning a feature of
   "urn:ietf:params:xml:ns:xmpp-e2e:6:encryption".

   <iq xmlns='jabber:client'
       id='disco1'
       to='romeo@montegue.lit/garden'
       type='result'>
     <query xmlns='http://jabber.org/protocol/disco#info'>
       ...
       <feature xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6:encryption'/>
       ...
     </query>
   </iq>

   To facilitate discovery, an agent SHOULD also include [XEP-0115]
   information in any directed or broadcast presence updates.

6.2.  Encrypting XMPP Stanzas

   The process that a sending agent follows for securing stanzas is the
   same regardless of the form of stanza (i.e., <iq/>, <message/>, or
   <presence/>).

6.2.1.  Prerequisites

   First, the sending agent prepares and retains the following:


   o  The JID of the sender (i.e. its own JID).  This SHOULD be the bare
      JID (localpart@domainpart).


   o  The JID of the recipient.  This SHOULD be the bare JID
      (localpart@domainpart).


   o  A Session Master Key (SMK).  The SMK MUST have a length at least
      equal to that required by the key wrapping algorithm in use and
      MUST be generated randomly.  See [RFC4086] for considerations on
      generating random values.





Miller & Wallace         Expires January 5, 2015               [Page 10]


Internet-Draft                  XMPP E2E                       July 2014


   o  A SMK identifier (SID).  The SID MUST be unique for a given
      (sender, recipient, SMK) tuple, and MUST NOT be derived from SMK
      itself.


6.2.2.  Process

   For a given plaintext stanza (S), the sending agent performs the
   following:


   1.  Ensures the plaintext stanza is fully qualified, including the
       proper namespace declarations (e.g., contains the attribute
       'xmlns' set to the value "jabber:client" for 'jabber:client'
       stanzas defined in [RFC6120]).


   2.  Notes the current UTC date and time (N) when this stanza is
       constructed, formatted as described under Section 10.


   3.  Constructs a forwarding envelope (M) using a <forwarded/> element
       qualified by the "urn:xmpp:forward:0" namespace (as defined in
       [XEP-0297]) as follows:



       *  The child element <delay/> qualified by the "urn:xmpp:delay"
          namespace (as defined in [XEP-0203]) with the attribute
          'stamp' set to the UTC date and time value N


       *  The plaintext stanza S


   4.  Converts the forwarding envelope (M) to a UTF-8 encoded string
       (M'), optionally removing line breaks and other insignificant
       whitespace between elements and attributes, i.e.  M' =
       UTF8-encode(M).  We call M' a "stanza-string" because for
       purposes of encryption and decryption it is treated not as XML
       but as an opaque string (this avoids the need for complex
       canonicalization of the XML input).


   5.  Generates a Content Master Key (CMK).  The CMK MUST have a length
       at least equal to that required by the content encryption
       algorithm in use and MUST be generated randomly.  See [RFC4086]
       for considerations on generating random values.



Miller & Wallace         Expires January 5, 2015               [Page 11]


Internet-Draft                  XMPP E2E                       July 2014


   6.  Generates any additional unprotected block cipher factors (IV);
       e.g., initialization vector/nonce.  A sending agent MUST ensure
       that no two sets of factors are used with the same CMK, and
       SHOULD NOT reuse such factors for other stanzas.


   7.  Performs the message encryption steps from [JOSE-JWE] to generate
       the JWE Header (H), JWE Encrypted Key (E), JWE Ciphertext (C),
       and JWE Integrity Value (I); using the following inputs:



       *  The 'alg' property is set to an appropriate key wrapping
          algorithm (e.g., "A256KW" or "A128KW"); recipients use the key
          request process in Section 8 to obtain the SMK.


       *  The 'enc' property is set to the intended content encryption
          algorithm.


       *  SMK as the key for CMK Encryption.


       *  CMK as the JWE Content Master Key.


       *  IV as the JWE Initialization Vector.


       *  M' as the plaintext content to encrypt.


   8.  Constructs an <e2e/> element qualified by the
       "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace as follows:



       *  The attribute 'type' set to the value "enc".


       *  The attribute 'id' set to the identifier value SID.


       *  The child element <encheader/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as H, encoded base64url as per [RFC4648].




Miller & Wallace         Expires January 5, 2015               [Page 12]


Internet-Draft                  XMPP E2E                       July 2014


       *  The child element <cmk/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character as E, encoded base64url as per [RFC4648].


       *  The child element <iv/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character as IV, encoded base64url as per [RFC4648].


       *  The child element <data/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as C, encoded base64url as per [RFC4648].


       *  The child element <mac/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as I, encoded base64url as per [RFC4648].


   9.  Sends the <e2e/> element as the payload of a stanza that SHOULD
       match the stanza from step 1 in kind (e.g., <message/>), type
       (e.g., "chat"), and addressing (e.g., to="romeo@montague.net"
       from="juliet@capulet.net/balcony").  If the original stanza (S)
       has a value for the 'id' attribute, this stanza MUST NOT use the
       same value for its 'id' attribute.


6.3.  Decrypting XMPP Stanzas

6.3.1.  Protocol Not Understood

   If the receiving agent does not understand the protocol, it MUST do
   one and only one of the following: (1) ignore the <e2e/> extension,
   (2) ignore the entire stanza, or (3) return a <service-unavailable/>
   error to the sender, as described in [RFC6120].

   NOTE: If the inbound stanza is an <iq/>, the receiving agent MUST
   return an error to the sending agent, to comply with the exchanging
   of IQ stanzas in [RFC6121].

6.3.2.  Process

   Upon receipt of an encrypted stanza, the receiving agent performs the
   following:

   1.  Determines if a valid SMK is available, associated with the SID
       specified by the 'id' attribute value of the <e2e/> element and



Miller & Wallace         Expires January 5, 2015               [Page 13]


Internet-Draft                  XMPP E2E                       July 2014


       the sending agent JID specified by the 'from' attribute of the
       wrapping stanza.  If the receiving agent does not already have
       the SMK, it requests it according to Section 8.


   2.  Performs the message decryption steps from [JOSE-JWE] to generate
       the plaintext forwarding envelope string M', using the following
       inputs:



       *  The JWE Header (H) from the <encheader/> element's character
          data content.


       *  The JWE Encrypted Key (E) from the <cmk/> element's character
          data content.


       *  The JWE Initialization Vector/Nonce (I) from the <iv/>
          element's character data content.


       *  The JWE Ciphertext (C) from the <data/> element's character
          data content.


       *  The JWE Integrity Value (I) from the <mac/> element's
          character data content.


   3.  Converts the forwarding envelope UTF-8 encoded string M' into XML
       element (M).


   4.  Obtains the UTC date and time (N) from the <delay/> child
       element, and verifies it is within the accepted range, as
       specified in Section 10.


   5.  Obtains the plaintext stanza (S), which is a child element node
       of M; the stanza MUST be fully qualified with proper namespace
       declarations for XMPP stanzas, to help distinguish it from other
       content within M.

       .





Miller & Wallace         Expires January 5, 2015               [Page 14]


Internet-Draft                  XMPP E2E                       July 2014


6.3.3.  Insufficient Information

   At step 1, if the receiving agent is unable to obtain the CMK, or the
   receiving agent could not otherwise determine the additional
   information, it MAY return a <bad-request/> error to the sending
   agent (as described in [RFC6120]), optionally supplemented by an
   application-specific error condition element of <insufficient-
   information/>:

   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            id='fJZd9WFIIwNjFctT'
            to='romeo@montegue.lit/garden'
            type='chat'>
     <e2e xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
          id='835c92a8-94cd-4e96-b3f3-b2e75a438f92'>
       <encheader>[XML character data]</encheader>
       <cmk>[XML character data]</cmk>
       <iv>[XML character data]</iv>
       <data>[XML character data]</data>
       <mac>[XML character data]</mac>
     </e2e>
     <error type='modify'>
       <bad-request
           xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
       <insufficient-information
           xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'/>
     </error>
   </message>

   In addition to returning an error, the receiving agent SHOULD NOT
   present the stanza to the intended recipient (human or application)
   and SHOULD provide some explicit alternate processing of the stanza
   (which MAY be to display a message informing the recipient that it
   has received a stanza that cannot be decrypted).

6.3.4.  Failed Decryption

   At step 2, if the receiving agent is unable to successfully decrypt
   the stanza, the receiving agent SHOULD return a <bad-request/> error
   to the sending agent (as described in [RFC6120]), optionally
   supplemented by an application-specific error condition element of
   <decryption-failed/> (previously defined in [RFC3923]):








Miller & Wallace         Expires January 5, 2015               [Page 15]


Internet-Draft                  XMPP E2E                       July 2014


   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            id='fJZd9WFIIwNjFctT'
            to='romeo@montegue.lit/garden'
            type='chat'>
     <e2e xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
          id='835c92a8-94cd-4e96-b3f3-b2e75a438f92'>
       <encheader>[XML character data]</encheader>
       <cmk>[XML character data]</cmk>
       <iv>[XML character data]</iv>
       <data>[XML character data]</data>
       <mac>[XML character data]</mac>
     </e2e>
     <error type='modify'>
       <bad-request xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
       <decryption-failed xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'/>
     </error>
   </message>

   In addition to returning an error, the receiving agent SHOULD NOT
   present the stanza to the intended recipient (human or application)
   and SHOULD provide some explicit alternate processing of the stanza
   (which MAY be to display a message informing the recipient that it
   has received a stanza that cannot be decrypted).

6.3.5.  Timestamp Not Acceptable

   At step 4, if the stanza is successfully decrypted but the timestamp
   fails the checks outlined in Section 10, the receiving agent MAY
   return a <not-acceptable/> error to the sender (as described in
   [RFC6120]), optionally supplemented by an application-specific error
   condition element of <bad-timestamp/> (previously defined in
   [RFC3923]):


















Miller & Wallace         Expires January 5, 2015               [Page 16]


Internet-Draft                  XMPP E2E                       July 2014


   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            id='fJZd9WFIIwNjFctT'
            to='romeo@montegue.lit/garden'
            type='chat'>
     <e2e xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
          id='835c92a8-94cd-4e96-b3f3-b2e75a438f92'>
       <encheader>[XML character data]</encheader>
       <cmk>[XML character data]</cmk>
       <iv>[XML character data]</iv>
       <data>[XML character data]</data>
       <mac>[XML character data]</mac>
     </e2e>
     <error type='modify'>
       <bad-request xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
       <bad-timestamp xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'/>
     </error>
   </message>

6.3.6.  Successful Decryption

   If the receiving agent successfully decrypted the payload, it MUST
   NOT return a stanza error.

   If the payload is an <iq/> of type "get" or "set", and the response
   to this <iq/> is of type "error", the receiving agent MUST send the
   encrypted response wrapped in an <iq/> of type "result", to prevent
   exposing information about the payload.

6.4.  Example - Securing a Message

   NOTE: unless otherwise indicated, all line breaks are included for
   readability.

   The sending agent begins with the plaintext version of the <message/>
   stanza 'S':















Miller & Wallace         Expires January 5, 2015               [Page 17]


Internet-Draft                  XMPP E2E                       July 2014


   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            to='romeo@montegue.lit'
            type='chat'>
     <thread>35740be5-b5a4-4c4e-962a-a03b14ed92f4</thread>
     <body>
       But to be frank, and give it thee again.
       And yet I wish but for the thing I have.
       My bounty is as boundless as the sea,
       My love as deep; the more I give to thee,
       The more I have, for both are infinite.
     </body>
   </message>

   and the following prerequisites:

   o  Sender JID as "juliet@capulet.lit/balcony"


   o  Recipient JID as "romeo@montegue.lit"


   o  Session Master Key (SMK) as (base64 encoded)
      "xWtdjhYsH4Va_9SfYSefsJfZu03m5RrbXo_UavxxeU8"


   o  SMK identifier (SID) as "835c92a8-94cd-4e96-b3f3-b2e75a438f92"


   The sending agent performs steps 1, 2, and 3 from Section 6.2.2 to
   generate the envelope:




















Miller & Wallace         Expires January 5, 2015               [Page 18]


Internet-Draft                  XMPP E2E                       July 2014


   <forwarded xmlns='urn:xmpp:forward:0'>
     <delay xmlns='urn:xmpp:delay'
            stamp='1492-05-12T20:07:37.012Z'/>
     <message xmlns='jabber:client'
              from='juliet@capulet.lit/balcony'
              to='romeo@montegue.lit'
              type='chat'>
       <thread>35740be5-b5a4-4c4e-962a-a03b14ed92f4</thread>
       <body>
         But to be frank, and give it thee again.
         And yet I wish but for the thing I have.
         My bounty is as boundless as the sea,
         My love as deep; the more I give to thee,
         The more I have, for both are infinite.
       </body>
     </message>
   </forwarded>

   Then the sending agent performs steps 4 through 7 (with Content
   Master Key as "LViSXX0Jx-I3v1zY1-KcGeivmWKuq0QE_71ywQGU6OhlM2NoQo1zHi
   77zI3ieIUh7Wb1S3kXmNily0_FZoIG7A", base64url encoded) to generate the
   [JOSE-JWE] outputs:

   JWE Header

   {
     "alg":"A256KW",
     "enc":"A256CBC+HS512",
     "kid":"835c92a8-94cd-4e96-b3f3-b2e75a438f92"
   }

   JWE Encrypted Key

   2tsmGH-WQdBxxJEs3d6LB2ovK6e1_9C1ogizJ9c6OvLmC6IeilHZ2Mimq2AElgI
   ploz0VQv5LOH9ST93WvvhVzMHSfx0Cwl0

   JWE Initialization Vector

   ncOH4MsHT9HlJxnirx4qwg












Miller & Wallace         Expires January 5, 2015               [Page 19]


Internet-Draft                  XMPP E2E                       July 2014


   JWE Ciphertext

   FkFc4xGTVkjn7ojtS0SUY8IWfqsQKEIAlvLaBKieqVX1PAlq1ZjPp4TZC2I2eh7
   01Lef3iRuNZd1nlgP2aREyHYCpE3FAelUoVG90B1FrJMnDUKAka7eb6GImamWPf
   9onV-m5-GcUpejO9f1oPi-rwHzp475UPdAeKq5Z4zds8yXhQP-XyJbCPTtM-UQC
   2-_q-3EKBHC4jM3qWDxVJ0JbIif3fCVRowzJh4AOB84YrfvkgUjMItqQPg2H6QB
   NqGUspLI634lM8R-mhGciDZX2Jh_nKoXLAf5GCnvL9PlI7OdFqocPBIIPpjNrgX
   _Z4PFjeq7ILx98GhVkryLYU9HVOFPCYci-lF9nfw1geliLfkoj5QZyi4J2SOtYa
   O_zPmQvCXaUREqPf5UDAlgvc50a4ByYnNbkWSbhZ5Z388s8ELzPSE9XypdgP-1c
   SyRke7V8iGe4eHNsm01TgWILYOFK4mYAM52OTitJxmQtmRp6izY5ZFdH9f_WdoB
   1RXmGEZydvL-estcjx5ghsV3gktedIl0HA4R_M_N5TFIwv7hiisyRLi2aQtyFbE
   7pZ6Oz-cYsLc4qFfXbb13U9a2-Byul8hm_E2b3m4GMhmsCiROm-uht9Ek4h9BIx
   FhDKPr-htOXc93-uQNZlAQfkITAKlJfQ

   JWE Integrity Value

   Aj8lKdPMDE4U82UAhDJBaRrl3USmuzS2hfFOe_OBEv8

   Then the sending agent performs steps 8 and 9, and sends the
   following:































Miller & Wallace         Expires January 5, 2015               [Page 20]


Internet-Draft                  XMPP E2E                       July 2014


   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            id='fJZd9WFIIwNjFctT'
            to='romeo@montegue.lit'
            type='chat'>
     <e2e xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
          type='enc'
          id='835c92a8-94cd-4e96-b3f3-b2e75a438f92'>
       <encheader>
         eyJhbGciOiJBMjU2S1ciLCJlbmMiOiJBMjU2Q0JDK0hTNTEyIiwia2lkI
         joiODM1YzkyYTgtOTRjZC00ZTk2LWIzZjMtYjJlNzVhNDM4ZjkyIn0
       </encheader>
       <cmk>
         2tsmGH-WQdBxxJEs3d6LB2ovK6e1_9C1ogizJ9c6OvLmC6IeilHZ2Mimq
         2AElgIploz0VQv5LOH9ST93WvvhVzMHSfx0Cwl0
       </cmk>
       <iv>
         ncOH4MsHT9HlJxnirx4qwg
       </iv>
       <data>
         FkFc4xGTVkjn7ojtS0SUY8IWfqsQKEIAlvLaBKieqVX1PAlq1ZjPp4TZC
         2I2eh701Lef3iRuNZd1nlgP2aREyHYCpE3FAelUoVG90B1FrJMnDUKAka
         7eb6GImamWPf9onV-m5-GcUpejO9f1oPi-rwHzp475UPdAeKq5Z4zds8y
         XhQP-XyJbCPTtM-UQC2-_q-3EKBHC4jM3qWDxVJ0JbIif3fCVRowzJh4A
         OB84YrfvkgUjMItqQPg2H6QBNqGUspLI634lM8R-mhGciDZX2Jh_nKoXL
         Af5GCnvL9PlI7OdFqocPBIIPpjNrgX_Z4PFjeq7ILx98GhVkryLYU9HVO
         FPCYci-lF9nfw1geliLfkoj5QZyi4J2SOtYaO_zPmQvCXaUREqPf5UDAl
         gvc50a4ByYnNbkWSbhZ5Z388s8ELzPSE9XypdgP-1cSyRke7V8iGe4eHN
         sm01TgWILYOFK4mYAM52OTitJxmQtmRp6izY5ZFdH9f_WdoB1RXmGEZyd
         vL-estcjx5ghsV3gktedIl0HA4R_M_N5TFIwv7hiisyRLi2aQtyFbE7pZ
         6Oz-cYsLc4qFfXbb13U9a2-Byul8hm_E2b3m4GMhmsCiROm-uht9Ek4h9
         BIxFhDKPr-htOXc93-uQNZlAQfkITAKlJfQ
       </data>
       <mac>
         Aj8lKdPMDE4U82UAhDJBaRrl3USmuzS2hfFOe_OBEv8
       </mac>
     </e2e>
   </message>

7.  Signatures

7.1.  Determining Support

   If an agent supports receiving end-to-end object signatures, it MUST
   advertise that fact in its responses to [XEP-0030] information
   ("disco#info") requests by returning a feature of
   "urn:ietf:params:xml:ns:xmpp-e2e:6:signatures".




Miller & Wallace         Expires January 5, 2015               [Page 21]


Internet-Draft                  XMPP E2E                       July 2014


   <iq xmlns='jabber:client'
       id='disco1'
       to='romeo@montegue.lit/garden'
       type='result'>
     <query xmlns='http://jabber.org/protocol/disco#info'>
       ...
       <feature xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6:signatures'/>
       ...
     </query>
   </iq>

   To facilitate discovery, an agent SHOULD also include [XEP-0115]
   information in any directed or broadcast presence updates.

7.2.  Signing XMPP Stanzas

   The basic process that a sending agent follows for authenticating
   stanzas is the same regardless of the kind of stanza (i.e., <iq/>,
   <message/>, or <presence/>).

7.2.1.  Process

   For a given plaintext stanza (S), the sending agent performs the
   following:

   1.  Ensures the plaintext stanza is fully qualified, including the
       proper namespace declarations (e.g., contains the attribute
       'xmlns' set to the value "jabber:client" for 'jabber:client'
       stanzas defined in [RFC6120]).


   2.  Notes the current UTC date and time (N) when this stanza is
       constructed, formatted as described under Section 10.


   3.  Constructs a forwarding envelope (M) using a <forwarded/> element
       qualified by the "urn:xmpp:forward:0" namespace (as defined in
       [XEP-0297]) as follows:



       *  The child element <delay/> qualified by the "urn:xmpp:delay"
          namespace (as defined in [XEP-0203]) with the attribute
          'stamp' set to the UTC date and time value N


       *  The plaintext stanza S




Miller & Wallace         Expires January 5, 2015               [Page 22]


Internet-Draft                  XMPP E2E                       July 2014


   4.  Converts the forwarding envelope (M) to a UTF-8 encoded string
       (M'), optionallly removing line breaks and other insignificant
       whitespace between elements and attributes, i.e.  M' =
       UTF8-encode(M).  We call M' a "stanza-string" because for
       purposes of encryption and decryption it is treated not as XML
       but as an opaque string (this avoids the need for complex
       canonicalization of the XML input).


   5.  Chooses a private asymmetric key (PK) for which the sending agent
       has published the corresponding public key to the intended
       recipients.


   6.  Performs the message signatures steps from [JOSE-JWS] to generate
       the JWS Header (H) and JWS Signature (I); using the following
       inputs:



       *  The 'alg' property is set to an appropriate signature
          algorithm for PK (e.g., "R256").

       *  M' as the JWS Payload.

   7.  Constructs an <e2e/> element qualified by the
       "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace as follows:



       *  The attribute 'type' set to the value "sig"

       *  The child element <sigheader/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as H, encoded base64url as per [RFC4648].


       *  The child element <data/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as M', encoded base64url as per [RFC4648].


       *  The child element <sig/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as I, encoded base64url as per [RFC4648].






Miller & Wallace         Expires January 5, 2015               [Page 23]


Internet-Draft                  XMPP E2E                       July 2014


   8.  Sends the <e2e/> element as the payload of a stanza that SHOULD
       match the stanza from step 1 in kind (e.g., <message/>), type
       (e.g., "chat"), and addressing (e.g., to="romeo@montegue.lit"
       from="juliet@capulet.lit/balcony").  If the original stanza (S)
       has a value for the 'id' attribute, this stanza SHOULD NOT use
       the same value for its "id" attribute.

7.3.  Verifying Signed XMPP Stanzas

7.3.1.  Protocol Not Understood

   If the receiving agent does not understand the protocol, it MUST do
   one and only one of the following: (1) ignore the <e2e/> extension,
   (2) ignore the entire stanza, or (3) return a <service-unavailable/>
   error to the sender, as described in [RFC6120].

   NOTE: If the inbound stanza is an <iq/>, the receiving agent MUST
   return an error to the sending agent, to comply with the exchanging
   of IQ stanzas in [RFC6121].

7.3.2.  Process

   Upon receipt of a signed stanza, the receiving agent performs the
   following:


   1.  Ensures it has appropriate materials to verify the signature,
       which generally means ensuring that it possesses one or more
       public keys for the sending agent (if one is not provided as part
       of the JWS Header).

   2.  Performs the message validation steps from [JOSE-JWS], with the
       following inputs:



       *  The JWS Header H from the <sigheader/> element's character
          data content.


       *  The JWS payload M' from the <data/> element's character data
          content.


       *  The JWS Signature from the <sig/> element's character data
          content.





Miller & Wallace         Expires January 5, 2015               [Page 24]


Internet-Draft                  XMPP E2E                       July 2014


   3.  Converts the forwarding envelope UTF-encoded string M' into XML
       element M.


   4.  Obtains the UTC date and time N from the <delay/> child element,
       and verifies it is within the accepted range, as specified in
       Section 10.


   5.  Obtains the plaintext stanza S, which is a child element node of
       M; the stanza MUST be fully qualified with the proper namespace
       declrations from XMPP stanzas, to help distinguish it from other
       content within M.

7.3.3.  Insufficient Information

   At step 1, if the receiving agent does not have the key used to sign
   the stanza, or the receiving agent could not otherwise determine it,
   it MAY return a <bad-request/> error to the sending agent (as
   described in [RFC6120]), optionally supplemented by an application-
   specific error condition element of <insufficient-information/>:

   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            id='fJZd9WFIIwNjFctT'
            to='romeo@montegue.lit/garden'
            type='chat'>
     <e2e xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
          type='sig'>
       <sigheader>[XML character data]</sigheader>
       <data>[XML character data]</data>
       <sig>[XML character data]</sig>
     </e2e>
     <error type='modify'>
       <bad-request
           xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
       <insufficient-information
           xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'/>
     </error>
   </message>

   In addition to returning an error, the receiving agent SHOULD NOT
   present the stanza to the intended recipient (human or application)
   and SHOULD provide some explicit alternate processing of the stanza
   (which MAY be to display a message informing the recipient that it
   has received a stanza that cannot be verified).





Miller & Wallace         Expires January 5, 2015               [Page 25]


Internet-Draft                  XMPP E2E                       July 2014


7.3.4.  Failed Verification

   At step 2, if the receiving agent is unable to successfully verify
   the stanza, the receiving agent SHOULD return a <bad-request/> error
   to the sending agent (as described in [RFC6120]), optionally
   supplemented by an application-specific error condition element of
   <verification-failed/>:

   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            id='fJZd9WFIIwNjFctT'
            to='romeo@montegue.lit/garden'
            type='chat'>
     <e2e xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
          type='sig'>
       <sigheader>[XML character data]</sigheader>
       <data>[XML character data]</data>
       <sig>[XML character data]</sig>
     </e2e>
     <error type='modify'>
       <bad-request
           xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
       <verification-failed
           xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'/>
     </error>
   </message>

   In addition to returning an error, the receiving agent SHOULD NOT
   present the stanza to the intended recipient (human or application)
   and SHOULD provide some explicit alternate processing of the stanza
   (which MAY be to display a message informing the recipient that it
   has received a stanza that cannot be verified).

7.3.5.  Timestamp Not Acceptable

   At step 4, if the stanza is successfully verified but the timestamp
   fails the checks outlined in Section 10, the receiving agent MAY
   return a <not-acceptable/> error to the sender (as described in
   [RFC6120]), optionally supplemented by an application-specific error
   condition element of <bad-timestamp/> (previously defined in
   [RFC3923]):










Miller & Wallace         Expires January 5, 2015               [Page 26]


Internet-Draft                  XMPP E2E                       July 2014


   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            id='fJZd9WFIIwNjFctT'
            to='romeo@montegue.lit/garden'
            type='chat'>
     <e2e xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
          type='sig'>
       <sigheader>[XML character data]</sigheader>
       <data>[XML character data]</data>
       <sig>[XML character data]</sig>
     </e2e>
     <error type='modify'>
       <not-acceptable
           xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
       <bad-timestamp
           xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'/>
     </error>
   </message>

7.3.6.  Successful Verification

   If the receiving agent successfully verified the payload, it SHOULD
   NOT return a stanza error.  However, if the signed stanza is an <iq/>
   of type "get" or "set", the response MAY be sent unsigned if the
   receiving agent does not have an appropriate public-private key-pair.

   Otherwise, the receiving agent SHOULD send the <iq/> response signed
   as per Section 7.2.1, with the 'type' attribute set to the value
   "result", even if the response to the signed <iq/> stanza is of type
   "error".  The error applies to the signed stanza, not the wrapping
   stanza.

7.4.  Example - Signing a Message

   NOTE: unless otherwise indicated, all line breaks are included for
   readability.

   The sending agent beings with the plaintext version of <message/>
   stanza 'S':












Miller & Wallace         Expires January 5, 2015               [Page 27]


Internet-Draft                  XMPP E2E                       July 2014


   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            to='romeo@montegue.lit'
            type='chat'>
     <thread>35740be5-b5a4-4c4e-962a-a03b14ed92f4</thread>
     <body>
       But to be frank, and give it thee again.
       And yet I wish but for the thing I have.
       My bounty is as boundless as the sea,
       My love as deep; the more I give to thee,
       The more I have, for both are infinite.
     </body>
   </message>

   Then the sending agent performs steps 1, 2, and 3 from Section 7.2.1
   generate the envelope M:

   <forwarded xmlns='urn:xmpp:forward:0'>
     <delay xmlns='urn:xmpp:delay'
            stamp='1492-05-12T20:07:37.012Z'/>
     <message xmlns='jabber:client'
              from='juliet@capulet.lit/balcony'
              to='romeo@montegue.lit'
              type='chat'>
       <thread>35740be5-b5a4-4c4e-962a-a03b14ed92f4</thread>
       <body>
         But to be frank, and give it thee again.
         And yet I wish but for the thing I have.
         My bounty is as boundless as the sea,
         My love as deep; the more I give to thee,
         The more I have, for both are infinite.
       </body>
     </message>
   </forwarded>

   Then the sending agent performs steps 4, 5, and 6 to generate the
   [JOSE-JWS] outputs:

   JWS Header (before base64url encoding)

   {
     "alg":"RS512",
     "kid":"juliet@capulet.lit"
   }







Miller & Wallace         Expires January 5, 2015               [Page 28]


Internet-Draft                  XMPP E2E                       July 2014


   JWS Payload

   PGZvcndhcmRlZCB4bWxucz0idXJuOnhtcHA6Zm9yd2FyZDowIj48ZGVsYXkgeG1
   sbnM9InVybjp4bXBwOmRlbGF5IiBzdGFtcD0iMTQ5Mi0wNS0xMlQyMDowNzozNy
   4wMTJaIi8-PG1lc3NhZ2UgeG1sbnM9ImphYmJlcjpjbGllbnQiIGZyb209Imp1b
   GlldEBjYXB1bGV0LmxpdC9iYWxjb255IiB0bz0icm9tZW9AbW9udGVndWUubGl0
   IiB0eXBlPSJjaGF0Ij48dGhyZWFkPjM1NzQwYmU1LWI1YTQtNGM0ZS05NjJhLWE
   wM2IxNGVkOTJmNDwvdGhyZWFkPjxib2R5PkJ1dCB0byBiZSBmcmFuaywgYW5kIG
   dpdmUgaXQgdGhlZSBhZ2Fpbi4gQW5kIHlldCBJIHdpc2ggYnV0IGZvciB0aGUgd
   GhpbmcgSSBoYXZlLiBNeSBib3VudHkgaXMgYXMgYm91bmRsZXNzIGFzIHRoZSBz
   ZWEsIE15IGxvdmUgYXMgZGVlcDsgdGhlIG1vcmUgSSBnaXZlIHRvIHRoZWUsIFR
   oZSBtb3JlIEkgaGF2ZSwgZm9yIGJvdGggYXJlIGluZmluaXRlLjwvYm9keT48L2
   1lc3NhZ2U-PC9mb3J3YXJkZWQ-

   JWS Signature

   YPfGouD50j0C_C-RneawG0jxXWDXgBkN3FJz6eaBFIPCh3hopiwtwKir7Yamvgt
   OrqhXx2pcu-70caGi6mKKLWvpdwdJ3nEnhdjPOd3CmLdaK_PBAMtIt8d3155hdl
   qNxSMsJN7PxmNLNwJhbksAsI-2TcCQsuxdIPXh6hcqBm44BpVio6AoRPqwF06XZ
   MMBMOMnEFcV6Ht20wCK1BEGgOmN3KYPbwKeTctG8HKPAh25_K66aEXT66lI19uW
   j1fGFJ79QQHUhc5y9pSKmpK7HKruPMRyrvpzBSfUhcb62nLXhM-LzY5taaDECzi
   fCi-IxySBtJJtPCqYAYW_IbrRFg

   Then the sending agent performs steps 7 and 8 and sends the
   following:


























Miller & Wallace         Expires January 5, 2015               [Page 29]


Internet-Draft                  XMPP E2E                       July 2014


   <message xmlns='jabber:client'
            from='juliet@capulet.lit/balcony'
            id='6aAWpciGV98qaegk'
            to='romeo@montegue.lit'
            type='cat'>
     <e2e xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
          type='sig'>
       <sigheader>
         eyJhbGciOiJSUzUxMiIsImtpZCI6Imp1bGlldEBjYXB1bGV0LmxpdCJ9
       </sigheader>
       <data>
         PGZvcndhcmRlZCB4bWxucz0idXJuOnhtcHA6Zm9yd2FyZDowIj48ZGVsY
         XkgeG1sbnM9InVybjp4bXBwOmRlbGF5IiBzdGFtcD0iMTQ5Mi0wNS0xMl
         QyMDowNzozNy4wMTJaIi8-PG1lc3NhZ2UgeG1sbnM9ImphYmJlcjpjbGl
         lbnQiIGZyb209Imp1bGlldEBjYXB1bGV0LmxpdC9iYWxjb255IiB0bz0i
         cm9tZW9AbW9udGVndWUubGl0IiB0eXBlPSJjaGF0Ij48dGhyZWFkPjM1N
         zQwYmU1LWI1YTQtNGM0ZS05NjJhLWEwM2IxNGVkOTJmNDwvdGhyZWFkPj
         xib2R5PkJ1dCB0byBiZSBmcmFuaywgYW5kIGdpdmUgaXQgdGhlZSBhZ2F
         pbi4gQW5kIHlldCBJIHdpc2ggYnV0IGZvciB0aGUgdGhpbmcgSSBoYXZl
         LiBNeSBib3VudHkgaXMgYXMgYm91bmRsZXNzIGFzIHRoZSBzZWEsIE15I
         GxvdmUgYXMgZGVlcDsgdGhlIG1vcmUgSSBnaXZlIHRvIHRoZWUsIFRoZS
         Btb3JlIEkgaGF2ZSwgZm9yIGJvdGggYXJlIGluZmluaXRlLjwvYm9keT4
         8L21lc3NhZ2U-PC9mb3J3YXJkZWQ-
       </data>
       <sig>
         YPfGouD50j0C_C-RneawG0jxXWDXgBkN3FJz6eaBFIPCh3hopiwtwKir7
         YamvgtOrqhXx2pcu-70caGi6mKKLWvpdwdJ3nEnhdjPOd3CmLdaK_PBAM
         tIt8d3155hdlqNxSMsJN7PxmNLNwJhbksAsI-2TcCQsuxdIPXh6hcqBm4
         4BpVio6AoRPqwF06XZMMBMOMnEFcV6Ht20wCK1BEGgOmN3KYPbwKeTctG
         8HKPAh25_K66aEXT66lI19uWj1fGFJ79QQHUhc5y9pSKmpK7HKruPMRyr
         vpzBSfUhcb62nLXhM-LzY5taaDECzifCi-IxySBtJJtPCqYAYW_IbrRFg
       </sig>
     </e2e>
   </message>

8.  Requesting Session Keys

   Because of the dynamic nature of XMPP stanza routing, the protocol
   does not exchange session keys as part of the encrypted stanza.
   Instead, a separate protocol is used by receiving agents to request a
   particular session key from the sending agent.

8.1.  Request Process

   Before a SMK can be requested, the receiving agent MUST have at least
   one public key for which it also has the private key.  The public
   key(s) are provided to the sending agent as part of this process.




Miller & Wallace         Expires January 5, 2015               [Page 30]


Internet-Draft                  XMPP E2E                       July 2014


   To request a SMK, the receiving agent performs the following:


   1.  Constructs a [JOSE-JWK] JWK Set (KS), containing information
       about each public key the requesting agent wishes to use.  Each
       key SHOULD include a value for the property 'kid' which uniquely
       identifies it within the context of all provided keys.  Each key
       MUST include a value for the property 'kid' if any two keys use
       the same algorithm.


   2.  Constructs a <keyreq/> element qualified by the
       "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace as follows:



       *  The attribute 'id' set to the SMK identifier value SID.


       *  The child element <pkey/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as KS, encoded base64url as per [RFC4648].


   3.  Sends the <keyreq/> element as the payload of an <iq/> stanza
       with the attribute 'type' set to "get", the attribute 'to' set to
       the full JID of the original encrypted stanza's sender, and the
       attribute 'id' set to an opaque string value the receiving agent
       uses to track the <iq/> response.


8.2.  Accept Process

   If the sending agent approves the request, it performs the following
   steps:


   1.  Generate a JSON Web Key (JWK) representing the symmetric SMK
       (according to [JOSE-JWK]):



       *  The "kty" parameter MUST be "oct".


       *  The "kid" parameter MUST be the SID.





Miller & Wallace         Expires January 5, 2015               [Page 31]


Internet-Draft                  XMPP E2E                       July 2014


       *  The "k" parameter MUST be the SMK, encoded as base64url.


       *  The "alg" parameter, if present, MUST be set to the algorithm
          in use for encrypting messages from Section 6.2.


       *  The "use" parameter, if present, MUST be set to "enc".


   2.  Chooses a key (PK) from the keys provided via KS, and notes its
       identifier value 'kid'.


   3.  Protects the SMK using the process outlined in [JOSE-KEYPROTECT]
       to generate the JWE Header (H), JWE Encrypted Key (E), JWE
       Initialization Vector (IV), JWE Ciphertext (C), and JWE Integrity
       Value (I); using the following inputs:



       *  The 'alg' property is set to an algorithm appropriate for the
          chosen PK (e.g., "RSA-OAEP" for a "RSA" key).


       *  The 'enc' property is set to the intended content encryption
          algorithm.


       *  A randomly generated CMK.  See [RFC4086] for considerations on
          generating random values.


       *  A randomly generated initialization vector.  See [RFC4086] for
          considerations on generating random values.


       *  SMK, formatted as a JWK as above.


   4.  Constructs a <keyreq/> element qualified by the
       "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace as follows:



       *  The attribute 'id' set to the SMK Identifier (SID).





Miller & Wallace         Expires January 5, 2015               [Page 32]


Internet-Draft                  XMPP E2E                       July 2014


       *  The child element <encheader/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as H, encoded base64url as per [RFC4648].


       *  The child element <cmk/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as E, encoded base64url as per [RFC4648].


       *  The child element <iv/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as IV, encoded base64url as per [RFC4648].


       *  The child element <data/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as C, encoded base64url as per [RFC4648].


       *  The child element <mac/> qualified by the
          "urn:ietf:params:xml:ns:xmpp-e2e:6" namespace and with XML
          character data as I, encoded base64url as per [RFC4648].


   5.  Sends the <keyreq/> element as the payload of an <iq/> stanza
       with the attribute 'type' set to "result", the attribute 'to' set
       to the full JID from the request <iq/>'s 'from' attribute, and
       the attribute 'id' set to the value of the request <iq/>'s 'id'
       attribute.


8.3.  Error Conditions

   If the sending agent does not approve the request, it sends an <iq/>
   stanza of type "error" and containing the reason for denying the
   request:


   o  <forbidden/>: the key request is made by an entity that is not
      authorized to decrypt stanzas from the sending agent and/or for
      the indicated SID.


   o  <item-not-found/>: the requested SID is no longer valid.






Miller & Wallace         Expires January 5, 2015               [Page 33]


Internet-Draft                  XMPP E2E                       July 2014


   o  <not-acceptable/>: the key request did not contain any keys the
      sending agent understands.


8.4.  Example of Successful Key Request

   NOTE: unless otherwise indicated, all line breaks are included for
   readability.

   To begin a key request, the receiving agent performs step 1 from
   Section 8.1 to generate the [JOSE-JWK]:

   {
     "keys": [{
       "kty":"RSA",
       "kid":"romeo@montegue.lit/garden",
       "n":"vtqejkMF01h8oKEaHfHEYO0C2jM7eISbbSvNs0SNItYWO6GbjpJf
       N4ldXw2vpVRdysnwU3zk6o2_SD0YCH1WgeuI0QK1knMTDdNSXx52e1c4BTw
       hlA8iHuutTWmpBqesn1GNZmqB3jYsJOkVBYwCJtkB9APaBvk0itlRtizjCf
       1HHnau7nGStyshgu8-srxi_d8rC5TTLSB_zT1i6fP8fwDloemXOtC0U65by
       5P-1ZHxaf_bD8fpjps6gwSgdkZKMJAI0bOWZWuMpp2ntqa0wLB7Ndxb2Ijr
       eog_s5ssAoSiXDVdoswSbp36ZP-1lnCk2j-vZ4qbhaFg5bZtgt-gwQ",
       "e":"AQAB"
     }]
   }

   Then the receiving agent performs step 2 to generate the <keyreq/>:

   <keyreq xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
           id='835c92a8-94cd-4e96-b3f3-b2e75a438f92'>
     <pkey>
       eyJrZXlzIjpbeyJrdHkiOiJSU0EiLCJraWQiOiJyb21lb0Btb250ZWd1ZS5
       saXQvZ2FyZGVuIiwibiI6InZ0cWVqa01GMDFoOG9LRWFIZkhFWU8wQzJqTT
       dlSVNiYlN2TnMwU05JdFlXTzZHYmpwSmZONGxkWHcydnBWUmR5c253VTN6a
       zZvMl9TRDBZQ0gxV2dldUkwUUsxa25NVERkTlNYeDUyZTFjNEJUd2hsQThp
       SHV1dFRXbXBCcWVzbjFHTlptcUIzallzSk9rVkJZd0NKdGtCOUFQYUJ2azB
       pdGxSdGl6akNmMUhIbmF1N25HU3R5c2hndTgtc3J4aV9kOHJDNVRUTFNCX3
       pUMWk2ZlA4ZndEbG9lbVhPdEMwVTY1Ynk1UC0xWkh4YWZfYkQ4ZnBqcHM2Z
       3dTZ2RrWktNSkFJMGJPV1pXdU1wcDJudHFhMHdMQjdOZHhiMklqcmVvZ19z
       NXNzQW9TaVhEVmRvc3dTYnAzNlpQLTFsbkNrMmotdlo0cWJoYUZnNWJadGd
       0LWd3USIsImUiOiJBUUFCIn1dfQ
     </pkey>
   </keyreq>

   Then the receiving agent performs step 3 and sends the following:






Miller & Wallace         Expires January 5, 2015               [Page 34]


Internet-Draft                  XMPP E2E                       July 2014


   <iq xmlns='jabber:client'
       from='romeo@montegue.lit/garden'
       id='xdJbWMA+'
       to='juliet@capulet.lit/balcony'
       type='get'>
     <keyreq xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
             id='835c92a8-94cd-4e96-b3f3-b2e75a438f92'>
       <pkey>
         eyJrZXlzIjpbeyJrdHkiOiJSU0EiLCJraWQiOiJyb21lb0Btb250ZWd1Z
         S5saXQvZ2FyZGVuIiwibiI6InZ0cWVqa01GMDFoOG9LRWFIZkhFWU8wQz
         JqTTdlSVNiYlN2TnMwU05JdFlXTzZHYmpwSmZONGxkWHcydnBWUmR5c25
         3VTN6azZvMl9TRDBZQ0gxV2dldUkwUUsxa25NVERkTlNYeDUyZTFjNEJU
         d2hsQThpSHV1dFRXbXBCcWVzbjFHTlptcUIzallzSk9rVkJZd0NKdGtCO
         UFQYUJ2azBpdGxSdGl6akNmMUhIbmF1N25HU3R5c2hndTgtc3J4aV9kOH
         JDNVRUTFNCX3pUMWk2ZlA4ZndEbG9lbVhPdEMwVTY1Ynk1UC0xWkh4YWZ
         fYkQ4ZnBqcHM2Z3dTZ2RrWktNSkFJMGJPV1pXdU1wcDJudHFhMHdMQjdO
         ZHhiMklqcmVvZ19zNXNzQW9TaVhEVmRvc3dTYnAzNlpQLTFsbkNrMmotd
         lo0cWJoYUZnNWJadGd0LWd3USIsImUiOiJBUUFCIn1dfQ
       </pkey>
     </keyreq>
   </iq>

   If the sending agent accepts this key request, it performs step 1
   from Section 8.2 to generate JWK representation of the SMK:

   {
     "kty":"oct",
     "kid":"835c92a8-94cd-4e96-b3f3-b2e75a438f92",
     "k":"xWtdjhYsH4Va_9SfYSefsJfZu03m5RrbXo_UavxxeU8"
   }

   Then the sending agent performs steps 2 and 3 to generate the
   protected SMK:

   JWE Header (before base64url encoding)

   {
     "alg":"RSA-OAEP",
     "kid":"romeo@montegue.lit/garden",
     "enc":"A256CBC+HS512",
     "cty":"application/jwk+json"
   }









Miller & Wallace         Expires January 5, 2015               [Page 35]


Internet-Draft                  XMPP E2E                       July 2014


   JWE Encrypted Key

   hKUOpAif76c-hmRwEphVB9wXjloLpwu75x98MSWyCBtfUgmopk93ttUXoZ4AAIk
   rZJOtrPUqPZwYHjay3ggfgjVljJ_KGhgqI5cScIzaAQs0Pxep6FnrsnUrw09Sjv
   2VRXOay4guMQnbQo0ibpifBxeuL9MJ_vdeb_BdSE8YZ4iTfMb7GT35gZC9NgweX
   3fiTEo2LjY8hEV3DHud5LlNZzYp9kLmAUZNIwGu7LtYyI4F7NnOv9oLx1HtmfE3
   _skkYtQoKMvMewLkIO88h325qCpWFdrLwPp63betCmewDJPaBdrp91rLchkXVo-
   d2ueKkb59TxWjMx7esBdaxCAcDQ

   JWE Initialization Vector

   Ggiego8UiSsj7GgY94qOng

   JWE Ciphertext

   4vIGDz9Hm6X4lSo9JoA6ZzS0KitztLGAiMUs3RTviFO09choPhxJNlOj8KX8QIL
   u4zZ-ytCnG-yzNx5SsT8KEQJhIf6_9yWplxpX173k6ZJV-sXGd4Mj9u7N0IqWQL
   K5DMytv7XopsZsR9QFCDNGew

   JWE Integrity Value

   3GuaasWV0XGTBbRtNP6OQ14_cHL-ZJC1naDtU6EIecw

   Then the sending agent performs step 4 to generate the <keyreq/>
   response:


























Miller & Wallace         Expires January 5, 2015               [Page 36]


Internet-Draft                  XMPP E2E                       July 2014


   <keyreq xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
           id='835c92a8-94cd-4e96-b3f3-b2e75a438f92'>
     <encheader>
       eyJhbGciOiJSU0EtT0FFUCIsImtpZCI6InJvbWVvQG1vbnRlZ3VlLmxpdC9
       nYXJkZW4iLCJlbmMiOiJBMjU2Q0JDK0hTNTEyIiwiY3R5IjoiYXBwbGljYX
       Rpb24vandrK2pzb24ifQ
     </encheader>
     <cmk>
       hKUOpAif76c-hmRwEphVB9wXjloLpwu75x98MSWyCBtfUgmopk93ttUXoZ4
       AAIkrZJOtrPUqPZwYHjay3ggfgjVljJ_KGhgqI5cScIzaAQs0Pxep6Fnrsn
       Urw09Sjv2VRXOay4guMQnbQo0ibpifBxeuL9MJ_vdeb_BdSE8YZ4iTfMb7G
       T35gZC9NgweX3fiTEo2LjY8hEV3DHud5LlNZzYp9kLmAUZNIwGu7LtYyI4F
       7NnOv9oLx1HtmfE3_skkYtQoKMvMewLkIO88h325qCpWFdrLwPp63betCme
       wDJPaBdrp91rLchkXVo-d2ueKkb59TxWjMx7esBdaxCAcDQ
     </cmk>
     <iv>
       Ggiego8UiSsj7GgY94qOng
     </iv>
     <data>
       4vIGDz9Hm6X4lSo9JoA6ZzS0KitztLGAiMUs3RTviFO09choPhxJNlOj8KX
       8QILu4zZ-ytCnG-yzNx5SsT8KEQJhIf6_9yWplxpX173k6ZJV-sXGd4Mj9u
       7N0IqWQLK5DMytv7XopsZsR9QFCDNGew
     </data>
     <mac>
       3GuaasWV0XGTBbRtNP6OQ14_cHL-ZJC1naDtU6EIecw
     </mac>
   </keyreq>

   Then the sending agent performs step 5 and sends the following:






















Miller & Wallace         Expires January 5, 2015               [Page 37]


Internet-Draft                  XMPP E2E                       July 2014


   <iq xmlns='jabber:client'
       from='juliet@capulet.lit/balcony'
       id='xdJbWMA+'
       to='romeo@montegue.lit/garden'
       type='result'>
     <keyreq xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
             id='835c92a8-94cd-4e96-b3f3-b2e75a438f92'>
       <encheader>
         eyJhbGciOiJSU0EtT0FFUCIsImtpZCI6InJvbWVvQG1vbnRlZ3VlLmxpdC9
         nYXJkZW4iLCJlbmMiOiJBMjU2Q0JDK0hTNTEyIiwiY3R5IjoiYXBwbGljYX
         Rpb24vandrK2pzb24ifQ
       </encheader>
       <cmk>
         hKUOpAif76c-hmRwEphVB9wXjloLpwu75x98MSWyCBtfUgmopk93ttUXoZ4
         AAIkrZJOtrPUqPZwYHjay3ggfgjVljJ_KGhgqI5cScIzaAQs0Pxep6Fnrsn
         Urw09Sjv2VRXOay4guMQnbQo0ibpifBxeuL9MJ_vdeb_BdSE8YZ4iTfMb7G
         T35gZC9NgweX3fiTEo2LjY8hEV3DHud5LlNZzYp9kLmAUZNIwGu7LtYyI4F
         7NnOv9oLx1HtmfE3_skkYtQoKMvMewLkIO88h325qCpWFdrLwPp63betCme
         wDJPaBdrp91rLchkXVo-d2ueKkb59TxWjMx7esBdaxCAcDQ
       </cmk>
       <iv>
         Ggiego8UiSsj7GgY94qOng
       </iv>
       <data>
         4vIGDz9Hm6X4lSo9JoA6ZzS0KitztLGAiMUs3RTviFO09choPhxJNlOj8KX
         8QILu4zZ-ytCnG-yzNx5SsT8KEQJhIf6_9yWplxpX173k6ZJV-sXGd4Mj9u
         7N0IqWQLK5DMytv7XopsZsR9QFCDNGew
       </data>
       <mac>
         3GuaasWV0XGTBbRtNP6OQ14_cHL-ZJC1naDtU6EIecw
       </mac>
     </keyreq>
   </iq>

9.  Mulitple Operations

   The individual processes for encrypting and signing can be nested;
   the output of each process a complete stanza that could then be
   performed with the other.  An implementation MUST be able to process
   one level of nesting (e.g., an encrypted stanza nested within a
   signed stanza), and SHOULD handle multiple levels within reasonable
   limits for the receiving agent.

10.  Inclusion and Checking of Timestamps

   Timestamps are included to help prevent replay attacks.  All
   timestamps MUST conform to [XEP-0082] and be presented as UTC with no
   offset, and SHOULD include the seconds and fractions of a second to



Miller & Wallace         Expires January 5, 2015               [Page 38]


Internet-Draft                  XMPP E2E                       July 2014


   three digits.  Absent a local adjustment to the sending agent's
   perceived time or the underlying clock time, the sending agent MUST
   ensure that the timestamps it sends to the receiver increase
   monotonically (if necessary by incrementing the seconds fraction in
   the timestamp if the clock returns the same time for multiple
   requests).  The following rules apply to the receiving agent:

   o  It MUST verify that the timestamp received is within an acceptable
      range of the current time.  It is RECOMMENDED that implementations
      use an acceptable range of five minutes, although implementations
      MAY use a smaller acceptable range.


   o  It SHOULD verify that the timestamp received is greater than any
      timestamp received in the last 10 minutes which passed the
      previous check.


   o  If any of the foregoing checks fails, the timestamp SHOULD be
      presented to the receiving entity (human or application) marked as
      "old timestamp", "future timestamp", or "decreasing timestamp",
      and the receiving entity MAY return a stanza error to the sender.

   Note the foregoing assumes the stanza is received while the receiving
   agent is online; see Section 12 for offline storage considerations.

11.  Interaction with Stanza Semantics

   The following limitations and caveats apply:

   o  Undirected <presence/> stanzas SHOULD NOT be encrypted.  Such
      stanzas are delivered to anyone the sender has authorized, and can
      generate a large volume of key requests.


   o  Undirected <presence/> stanzas MAY be signed.  However, note that
      signatures significantly increase the size of a stanza kind that
      is often multiplexed across to many XMPP entities; this could have
      large impacts on bandwidth and latency.


   o  Stanzas directed to multiplexing services (e.g., multi-user chat)
      SHOULD NOT be encrypted, unless the sender has established an
      acceptable trust relationship with the multiplexing service.







Miller & Wallace         Expires January 5, 2015               [Page 39]


Internet-Draft                  XMPP E2E                       July 2014


12.  Interaction with Offline Storage

   The server makes its best effort to deliver stanzas.  When the
   receiving agent is offline at the time of delivery, the server might
   store the message until the recipient is next online (offline storage
   does not apply to <iq/> or <presence/> stanzas, only <message/>
   stanzas).  The following need to be considered:

   o  If the sending agent is not also online when the message is
      delivered to the receiving agent from offline storage, then the
      decryption process fails for insufficient information as described
      in Section 6.3.3.


   o  When performing the timestamp checks in Section 10, if the server
      includes delayed delivery data as specified in [XEP-0203] for when
      the server received the message, then the receiving agent SHOULD
      use the delayed delivery timestmap rather than the current time.


13.  Mandatory-to-Implement Cryptographic Algorithms

   All algorithms that MUST be implemented for [JOSE-JWE] and [JOSE-JWS]
   also MUST be implemented for this specification.  However, this
   specification further mandates the use of the following:

   o  MUST implement the "RSA1_5" JWE algorithm.


   o  MUST implement the "RS256" JWS algorithm.


14.  Security Considerations

14.1.  Storage of Encrypted Stanzas

   The recipient's server might store any <message/> stanzas received
   until the recipient is next available; this duration could be
   anywhere from a few minutes to several months.

14.2.  Re-use of Session Master Keys

   A sender SHOULD NOT use the same SMK for stanzas intended for
   different recipients, as determined by the localpart and domainpart
   of the recipient's JID.

   A sender MAY re-use a SMK for several stanzas to the same recipient.
   In this case, the SID remains the same, but the sending agent MUST



Miller & Wallace         Expires January 5, 2015               [Page 40]


Internet-Draft                  XMPP E2E                       July 2014


   generate a new CMK and IV for each encrypted stanza.  The sender
   SHOULD periodically generate a new SMK (and its associated SID);
   however, this specification does not mandate any specific algorithms
   or processes.

   In the case of <message/> stanzas, a sending agent might generate a
   new SMK each time it generates a new ThreadID, as outlined in
   [XEP-0201].

15.  IANA Considerations

15.1.  XML Namespaces Name for e2e Data in XMPP

   A number of URN sub-namespaces of encrypted and/or signed content for
   the Extensible Messaging and Presence Protocol (XMPP) is defined as
   follows.

   URI:  urn:ietf:params:xml:ns:xmpp-e2e:6

   Specification:  RFC XXXX

   Description:  This is an XML namespace name of encrypted and/or
      signed content for the Extensible Messaging and Presence Protocol
      as defined [[ this document ]].

   Registrant Contact:  IESG, <iesg@ietf.org>

   URI:  urn:ietf:params:xml:ns:xmpp-e2e:6:encryption

   Specification:  RFC XXXX

   Description:  This is an XML namespace name signalling support for
      encrypted content for the Extensible Messaging and Presence
      Protocol as defined [[ this document ]].

   Registrant Contact:  IESG, <iesg@ietf.org>

   URI:  urn:ietf:params:xml:ns:xmpp-e2e:6:signatures

   Specification:  RFC XXXX

   Description:  This is an XML namespace name signalling support for
      signed content for the Extensible Messaging and Presence Protocol
      as defined [[ this document ]].

   Registrant Contact:  IESG, <iesg@ietf.org>





Miller & Wallace         Expires January 5, 2015               [Page 41]


Internet-Draft                  XMPP E2E                       July 2014


16.  References

16.1.  Normative References

   [E2E-REQ]  Saint-Andre, P., "Requirements for End-to-End Encryption
              in the Extensible Messaging and Presence Protocol (XMPP)",
              draft-saintandre-xmpp-e2e-requirements-01 (work in
              progress), March 2010.

   [JOSE-JWA]
              Jones, M., "JSON Web Algorithms (JWA)", draft-ietf-jose-
              json-web-algorithms-11 (work in progress), May 2013.

   [JOSE-JWE]
              Jones, M., Rescola, E., and J. Hildebrand, "JSON Web
              Encryption (JWE)", draft-ietf-jose-json-web-encryption-11
              (work in progress), May 2013.

   [JOSE-JWK]
              Jones, M., "JSON Web Key (JWK)", draft-ietf-jose-json-web-
              key-11 (work in progress), December 2012.

   [JOSE-JWS]
              Jones, M., Bradley, J., and N. Sakimura, "JSON Web
              Signature (JWS)", draft-ietf-jose-json-web-signature-11
              (work in progress), May 2013.

   [JOSE-KEYPROTECT]
              Miller, M., "Using JSON Web Encryption (JWE) for
              Protecting JSON Web Key (JWK) Objects", draft-miller-jose-
              jwe-protected-jwk-00 (work in progress), February 2013.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC4648]  Josefsson, S., "The Base16, Base32, and Base64 Data
              Encodings", RFC 4648, October 2006.

   [RFC4949]  Shirey, R., "Internet Security Glossary, Version 2", RFC
              4949, August 2007.

   [RFC6120]  Saint-Andre, P., "Extensible Messaging and Presence
              Protocol (XMPP): Core", RFC 6120, March 2011.

   [RFC6121]  Saint-Andre, P., "Extensible Messaging and Presence
              Protocol (XMPP): Instant Messaging and Presence", RFC
              6121, March 2011.




Miller & Wallace         Expires January 5, 2015               [Page 42]


Internet-Draft                  XMPP E2E                       July 2014


   [XEP-0030]
              Eatmon, R., Hildebrand, J., Millard, P., and P. Saint-
              Andre, "Service Discovery", XSF XEP 0030, June 2006.

   [XEP-0082]
              Saint-Andre, P., "XMPP Date and Time Profiles", XSF XEP
              0082, May 2003.

   [XEP-0115]
              Hildebrand, J., Troncon, R., and P. Saint-Andre, "Entity
              Capabilities", XSF XEP 0115, February 2008.

   [XEP-0203]
              Saint-Andre, P., "Delayed Delivery", XSF XEP 0203,
              September 2009.

   [XEP-0297]
              Wild, M. and K. Smith, "Stanza Forwarding", XSF XEP 0297,
              July 2012.

16.2.  Informative References

   [RFC3923]  Saint-Andre, P., "End-to-End Signing and Object Encryption
              for the Extensible Messaging and Presence Protocol
              (XMPP)", RFC 3923, October 2004.

   [RFC4086]  Eastlake, D., Schiller, J., and S. Crocker, "Randomness
              Requirements for Security", RFC 4086, June 2005.

   [XEP-0201]
              Saint-Andre, P., Paterson, I., and K. Smith, "Best
              Practices for Message Threads", XSF XEP 0203, November
              2010.

   [Key-Table]
              Housley, R., Polk, T., Hartman, S., and D. Zhang,
              "Database of Long-Lived Symmetric Cryptographic Keys",
              December 2013.

Appendix A.  Schema for urn:ietf:params:xml:ns:xmpp-e2e:6

   The following XML schema is descriptive, not normative.

   <?xml version='1.0' encoding='UTF-8'?>

   <xs:schema
       xmlns:xs='http://www.w3.org/2001/XMLSchema'
       targetNamespace='urn:ietf:params:xml:ns:xmpp-e2e:6'



Miller & Wallace         Expires January 5, 2015               [Page 43]


Internet-Draft                  XMPP E2E                       July 2014


       xmlns='urn:ietf:params:xml:ns:xmpp-e2e:6'
       elementFormDefault='qualified'>

     <xs:element name='e2e'>
       <xs:complexType>
         <xs:attribute name='id' type='xs:string' use='optional'/>
         <xs:attribute name='type'use='required'>
           <xs:simpleType>
             <xs:restriction base='xs:NMTOKEN'>
               <xs:enumeration value='enc'/>
               <xs:enumeration value='sig'/>
             </xs:restriction>
           </xs:simpleType>
         </xs:attribute>
         <xs:sequence>
           <xs:element ref='header' minOccurs='1' maxOccurs='1'/>
           <xs:element ref='cmk' minOccurs='1' maxOccurs='1'/>
           <xs:element ref='iv' minOccurs=1' maxOccurs='1'/>
           <xs:element ref='data' minOccurs='1' maxOccurs='1'/>
           <xs:element ref='mac' minOccurs='1' maxOccurs='1'/>
         </xs:sequence>
       </xs:complexType>
     </xs:element>

     <xs:element name='keyreq'>
       <xs:complexType>
         <xs:attribute name='id' type='xs:string' use='required'/>
         <xs:sequence>
           <xs:element ref='pkey' minOccurs='0' maxOccurs='1'/>
           <xs:element ref='header' minOccurs='0' maxOccurs='1'/>
           <xs:element ref='cmk' minOccurs='1' maxOccurs='1'/>
           <xs:element ref='iv' minOccurs=1' maxOccurs='1'/>
           <xs:element ref='data' minOccurs='1' maxOccurs='1'/>
           <xs:element ref='mac' minOccurs='1' maxOccurs='1'/>
         </xs:sequence>
       </xs:complexType>
     </xs:element>

     <xs:element name='cmk'>
       <xs:complexType>
         <xs:simpleType>
           <xs:extension base='xs:string'>
           </xs:extension>
         </xs:simpleType>
       </xs:complexType>
     </xs:element>

     <xs:element name='iv'>



Miller & Wallace         Expires January 5, 2015               [Page 44]


Internet-Draft                  XMPP E2E                       July 2014


       <xs:complexType>
         <xs:simpleType>
           <xs:extension base='xs:string'>
           </xs:extension>
         </xs:simpleType>
       </xs:complexType>
     </xs:element>

     <xs:element name='data'>
       <xs:complexType>
         <xs:simpleType>
           <xs:extension base='xs:string'>
           </xs:extension>
         </xs:simpleType>
       </xs:complexType>
     </xs:element>

     <xs:element name='encheader'>
       <xs:complexType>
         <xs:simpleType>
           <xs:extension base='xs:string'>
           </xs:extension>
         </xs:simpleType>
       </xs:complexType>
     </xs:element>

     <xs:element name='mac'>
       <xs:complexType>
         <xs:simpleType>
           <xs:extension base='xs:string'>
           </xs:extension>
         </xs:simpleType>
       </xs:complexType>
     </xs:element>

     <xs:element name='pkey'>
       <xs:complexType>
         <xs:simpleType>
           <xs:extension base='xs:string'>
           </xs:extension>
         </xs:simpleType>
       </xs:complexType>
     </xs:element>

     <xs:element name='sigheader'>
       <xs:complexType>
         <xs:simpleType>
           <xs:extension base='xs:string'>



Miller & Wallace         Expires January 5, 2015               [Page 45]


Internet-Draft                  XMPP E2E                       July 2014


           </xs:extension>
         </xs:simpleType>
       </xs:complexType>
     </xs:element>

     <xs:element name='bad-timestamp' type='empty'/>
     <xs:element name='decryption-failed' type='empty'/>
     <xs:element name='insufficient-information' type='empty'/>
     <xs:element name='verification-failed' type='empty'/>

     <xs:simpleType name='empty'>
       <xs:restriction base='xs:string'>
         <xs:enumeration value=''/>
       </xs:restriction>
     </xs:simpleType>

   </xs:schema>

Appendix B.  Acknowledgements

   Thanks to Richard Barnes, Andrew Biggs, and Ben Schumacher for their
   feedback.

Authors' Addresses

   Matthew Miller
   Cisco Systems, Inc.
   1899 Wynkoop Street, Suite 600
   Denver, CO  80202
   USA

   Phone: +1-303-308-3204
   Email: mamille2@cisco.com


   Carl Wallace
   Red Hound Software, Inc.

   Email: carl@redhoundsoftware.com












Miller & Wallace         Expires January 5, 2015               [Page 46]