Internet Engineering Task Force                             M. Sivaraman
Internet-Draft                                                 S. Morris
Intended status: Experimental                                  R. Bellis
Expires: September 2, 2018                                   W. Krecicki
                                             Internet Systems Consortium
                                                           March 1, 2018


                           DNS Catalog Zones
                 draft-muks-dnsop-dns-catalog-zones-04

Abstract

   This document describes a method for automatic DNS zone provisioning
   among DNS primary and secondary nameservers by storing and
   transferring the catalog of zones to be provisioned as one or more
   regular DNS zones.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 2, 2018.

Copyright Notice

   Copyright (c) 2018 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of




Sivaraman, et al.       Expires September 2, 2018               [Page 1]


Internet-Draft              DNS Catalog Zones                 March 2018


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Description . . . . . . . . . . . . . . . . . . . . . . . . .   3
   4.  Catalog Zone Structure  . . . . . . . . . . . . . . . . . . .   4
     4.1.  SOA and NS Records  . . . . . . . . . . . . . . . . . . .   4
     4.2.  Zone Data . . . . . . . . . . . . . . . . . . . . . . . .   4
       4.2.1.  Resource Record Format  . . . . . . . . . . . . . . .   5
       4.2.2.  Multi-valued Properties . . . . . . . . . . . . . . .   5
       4.2.3.  Vendor-specific Properties  . . . . . . . . . . . . .   6
     4.3.  Zone Structure  . . . . . . . . . . . . . . . . . . . . .   6
       4.3.1.  List of Member Zones  . . . . . . . . . . . . . . . .   6
       4.3.2.  Catalog Zone Schema Version . . . . . . . . . . . . .   7
       4.3.3.  Default Zone Configuration  . . . . . . . . . . . . .   7
       4.3.4.  Zone Properties Specific to a Member Zone . . . . . .   7
   5.  Data Types  . . . . . . . . . . . . . . . . . . . . . . . . .   8
     5.1.  String  . . . . . . . . . . . . . . . . . . . . . . . . .   8
     5.2.  Booleans  . . . . . . . . . . . . . . . . . . . . . . . .   8
     5.3.  Integers  . . . . . . . . . . . . . . . . . . . . . . . .   8
     5.4.  Floating-Point Values . . . . . . . . . . . . . . . . . .   9
     5.5.  Domain Name . . . . . . . . . . . . . . . . . . . . . . .   9
     5.6.  IP Prefix . . . . . . . . . . . . . . . . . . . . . . . .   9
     5.7.  Single Host Address . . . . . . . . . . . . . . . . . . .  10
   6.  Nameserver Behavior . . . . . . . . . . . . . . . . . . . . .  10
     6.1.  General Requirements  . . . . . . . . . . . . . . . . . .  10
     6.2.  Updating Catalog Zones  . . . . . . . . . . . . . . . . .  11
     6.3.  Implementation Notes  . . . . . . . . . . . . . . . . . .  11
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  11
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  12
   9.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  12
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  12
     10.1.  Normative references . . . . . . . . . . . . . . . . . .  12
     10.2.  Informative references . . . . . . . . . . . . . . . . .  13
   Appendix A.  Open issues and discussion (to be removed before
                final publication) . . . . . . . . . . . . . . . . .  14
   Appendix B.  Change History (to be removed before final
                publication) . . . . . . . . . . . . . . . . . . . .  14
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  15

1.  Introduction

   The data in a DNS zone is synchronized amongst its primary and
   secondary nameservers using AXFR and IXFR.  However, the list of
   zones served by the primary (called a catalog in [RFC1035]) is not



Sivaraman, et al.       Expires September 2, 2018               [Page 2]


Internet-Draft              DNS Catalog Zones                 March 2018


   automatically synchronized with the secondaries.  To add or remove a
   zone, the administrator of a DNS nameserver farm not only has to add
   or remove the zone from the primary, they must also add/remove the
   zone from all secondaries, either manually or via an external
   application.  This can be both inconvenient and error-prone; it will
   also be dependent on the nameserver implementation.

   This document describes a method in which the catalog is represented
   as a regular DNS zone (called a "catalog zone" here), and transferred
   using DNS zone transfers.  As zones are added to or removed from the
   catalog zone, the changes are propagated to the secondary nameservers
   in the normal way.  The secondary nameservers then add/remove/modify
   the zones they serve in accordance with the changes to the zone.

   The contents and representation of catalog zones are described in
   Section 3.  Nameserver behavior is described in Section 6.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   Catalog zone:  A DNS zone containing a DNS catalog, that is, a list
         of DNS zones and associated zone configuration.

   Member zone:  A DNS zone whose configuration is published inside a
         catalog zone.

   Zone property:  A configuration parameter of a zone, sometimes also
         called a zone option, represented as a key/value pair.

   $CATZ:  Used in examples as a placeholder to represent the domain
         name of the catalog zone itself (c.f. $ORIGIN).

3.  Description

   A catalog zone is a specially crafted DNS zone that contains, as DNS
   zone data:

   o  A list of DNS zones (called "member zones").

   o  Default zone configuration information common to all member zones.

   o  Zone-specific configuration information.






Sivaraman, et al.       Expires September 2, 2018               [Page 3]


Internet-Draft              DNS Catalog Zones                 March 2018


   An implementation of catalog zones MAY allow the catalog to contain
   other catalog zones as member zones, but default zone configuration
   present in a catalog zone only applies to its immediate member zones.

   Although the contents of a catalog zone are interpreted and acted
   upon by nameservers, a catalog zone is a regular DNS zone and so must
   adhere to the standards for such zones.

   A catalog zone is primarily intended for the management of a farm of
   authoritative nameservers.  It is not expected that the content of
   catalog zones will be accessible from any recursive nameserver.

4.  Catalog Zone Structure

4.1.  SOA and NS Records

   As with any other DNS zone, a catalog zone MUST have a syntactically
   correct SOA record and one or more NS records at its apex.

   The SOA record's SERIAL, REFRESH, RETRY and EXPIRE fields [RFC1035]
   are used during zone transfer.  A catalog zone's SOA SERIAL field
   MUST increase when an update is made to the catalog zone's contents
   as per serial number arithmetic defined in [RFC1982].  Otherwise,
   secondary nameservers might not notice updates to the catalog zone's
   contents.

   Should the zone be made available for querying, the SOA record's
   MINIMUM field's value is the negative cache time (as defined in
   [RFC2308]).  Since recursive nameservers are not expected to be able
   to access (and subsequently cache) entries from a catalog zone a
   value of zero (0) is RECOMMENDED.

   Since there is no requirement to be able to query the catalog zone
   via recursive namservers the NS records at the apex will not be used
   and no parent delegation is required.  However, they are still
   required so that catalog zones are syntactically correct DNS zones.
   Any valid DNS name can be used in the NSDNAME field of such NS
   records [RFC1035] and they MUST be ignored.  A single NS RR with an
   NSDNAME field containing the absolute name "invalid." is RECOMMENDED
   [RFC2606].

4.2.  Zone Data

   A catalog zone contains a set of key/value pairs, where each key is
   encapsulated within the owner name of a DNS RR and the corresponding
   value is stored in the RR's RDATA.  The specific owner name depends
   on whether the property relates to the catalog zone itself, a member




Sivaraman, et al.       Expires September 2, 2018               [Page 4]


Internet-Draft              DNS Catalog Zones                 March 2018


   zone thereof, or to default zone properties described in Section 4.3.
   The owner names are case insensitive.

4.2.1.  Resource Record Format

   Each key/value pair has a defined data type, and each data type
   accordingly uses a particular RR TYPE to represent its possible
   values, as specified in Section 5.

   The general form of a catalog zone record is as follows:

         [<unique-id>.]<key>.<path>.$CATZ 0 IN <RRTYPE> <value>

   where <path> is a sequence of labels with values depending on the
   purpose (and hence position) of the record within the catalog zone
   (see Section 4.3) and where the <unique-id> prefix is only present
   for multi-valued properties (see Section 4.2.2).

   NB: Catalog zones use some RR TYPEs (such as PTR) with alternate
   semantics to those originally defined for them.  Although this may be
   controversial, the situation is similar to other similar zone-based
   representations such as response-policy zones [RPZ].

   The CLASS field of every RR in a catalog zone MUST be IN (1).  This
   is because some RR TYPEs such as APL used by catalog zones are
   defined only for the IN class.

   The TTL field's value is not specially defined by this memo.  Catalog
   zones are for authoritative nameserver management only and are not
   intended for general querying via recursive resolvers and therefore a
   value of zero (0) is RECOMMENDED.

   It is an error for any single owner name within a catalog zone (other
   than the apex of the zone itself) to have more than one RR associated
   with it.

4.2.2.  Multi-valued Properties

   Some properties do not represent single values but instead represent
   a collection of values.  The specification for each property
   describes whether it is single-valued or multi-valued.  A multi-
   valued property is encoded as multiple RRs where the owner name of
   each individual RR contains a unique (user specified) DNS label.

   So, while a single-valued key might be represented like this:

                 <key>.<path>.$CATZ IN TXT "value"




Sivaraman, et al.       Expires September 2, 2018               [Page 5]


Internet-Draft              DNS Catalog Zones                 March 2018


   a multi-valued key would be represented like this:

         <unique-id-1>.<key>.<path>.$CATZ IN TXT "value 1"
         <unique-id-2>.<key>.<path>.$CATZ IN TXT "value 2"
         ...

   NB: a property that is specified to be multi-valued MUST be encoded
   using the unique prefixed key syntax even if there is only one value
   present.

   The specification of any multi-valued property MUST document whether
   the collection represents either an ordered or un-ordered list.  In
   the former case the ordering of the prefixes according to the usual
   DNS canonical name ordering will determine the sort order.

4.2.3.  Vendor-specific Properties

   TBD: Prepare a list of zone configuration properties that are common
   to DNS implementations.  This is so that a company may manage a
   catalog zone using a Windows DNS server as the primary, and a
   secondary nameserver hosting service may pick up the common
   properties and may use a different nameserver implementation such as
   BIND or NSD on a POSIX operating system to serve it.

   TBD: We may specify that unrecognized zone property names must be
   ignored, or that nameserver specific properties must be specified
   using the "x-" prefix similar to MIME type naming.

   TBD: Any list of zone properties is ideally maintained as a registry
   rather than within this memo.

4.3.  Zone Structure

4.3.1.  List of Member Zones

   The list of member zones is specified as a multi-valued collection of
   domain names under the owner name "zones" where "zones" is a direct
   child domain of the catalog zone.

   The names of member zones are represented on the RDATA side (instead
   of as a part of owner names) so that all valid domain names may be
   represented regardless of their length [RFC1035].

   For example, if a catalog zone lists three zones "example.com.",
   "example.net." and "example.org.", the RRs would appear as follows:






Sivaraman, et al.       Expires September 2, 2018               [Page 6]


Internet-Draft              DNS Catalog Zones                 March 2018


           <m-unique-1>.zones.$CATZ 0 IN PTR example.com.
           <m-unique-2>.zones.$CATZ 0 IN PTR example.net.
           <m-unique-3>.zones.$CATZ 0 IN PTR example.org.

   where <m-unique-N> is a label that uniquely tags each record in the
   collection, as described in Section 4.2.2.

   Although any legal label could be used for <m-unique-N> it is
   RECOMMENDED that it be a value deterministically derived from the
   fully-qualified member zone name.  The BIND9 implementation uses the
   40 character hexadecimal representation of the SHA-1 digest
   [FIPS.180-4.2015] of the lower-cased member zone name as encoded in
   uncompressed wire format.

4.3.2.  Catalog Zone Schema Version

   The catalog zone schema version is specified by an unsigned integer
   property with the property name "version".  All catalog zones MUST
   have this property present.  Primary and secondary nameservers MUST
   NOT use catalog zones with an unexpected value in this property, but
   they may be transferred as ordinary zones.  For this memo, the
   "version" property value MUST be set to 2, i.e.

               version.$CATZ 0 IN TXT "2"

   NB: Version 1 was used in a draft version of this memo and reflected
   the implementation first found in BIND 9.11.

4.3.3.  Default Zone Configuration

   Default zone configuration comprises a set of properties that are
   applied to all member zones listed in the catalog zone unless
   overridden my member zone-specific information.

   All such properties are stored as child nodes of the owner name
   "defaults" itself a direct child node of the catalog zone, e.g.:

        example-prop.defaults.$CATZ 0 IN TXT "Example"

4.3.4.  Zone Properties Specific to a Member Zone

   Default zone properties can be overridden on a per-zone basis by
   specifying the property under the the sub-domain associated with the
   member zone in the list of zones, e.g.:

        example-prop.<m-unique>.zones.$CATZ 0 IN TXT "Example"





Sivaraman, et al.       Expires September 2, 2018               [Page 7]


Internet-Draft              DNS Catalog Zones                 March 2018


   where "m-unique" is the label that uniquely identifies the member
   zone name as described in Section 4.3.1.

   NB: when a zone-specific property is multi-valued the owner name will
   contain two unique identifiers, the left-most tagging being
   associated with the individual value (<unique-id-N>) and the other
   (<m-unique>) associated with the member zone itself, e.g.:

        $ORIGIN <m-unique>.zones.$CATZ
        <unique-id-1>.example-prop 0 IN TXT "Value 1"
        <unique-id-2>.example-prop 0 IN TXT "Value 2"
        ...

5.  Data Types

   This section lists the various data types defined for use within
   catalog zones.

5.1.  String

   A key with a string value is represented with a TXT RR [RFC1035],
   e.g.:

        example-prop.<m-unique>.zones.$CATZ 0 IN TXT "Example"

   If the RDATA is split into multiple <character-string> elements the
   MUST be directly concatenated without any separating character.

5.2.  Booleans

   A key with a boolean value is represented with a TXT RR containing a
   single <character-string> with a value of "true" for true condition
   and "false" for false condition, e.g:

        example-prop.<m-unique>.zones.$CATZ 0 IN TXT "false"

   The RDATA is case-insensitive.

5.3.  Integers

   A key with an integer value is specified using a TXT RR containing a
   single <character-string>.

   A signed integer's TXT RDATA uses the representation of an unsuffixed
   "integer constant" as defined in the C programming language standard
   [ISO.9899.1990] (of the type matching a 64-bit signed integer on that
   platform), with an optional minus prefix.




Sivaraman, et al.       Expires September 2, 2018               [Page 8]


Internet-Draft              DNS Catalog Zones                 March 2018


   An unsigned integer's TXT RDATA uses the representation of an
   unsuffixed "integer constant" as defined in the C programming
   language standard [ISO.9899.1990] (of the type matching a 64-bit
   unsigned integer on that platform).

   For example, a property with an unsigned integer value of 300 would
   appear as follows:

        example-prop.<m-unique>.zones.$CATZ 0 IN TXT "300"

5.4.  Floating-Point Values

   A key with a floating-point value is specified using a TXT RR
   containing a single <character-string>.

   A floating-point value's TXT RDATA uses the representation of an
   unsuffixed "floating constant" as defined in the C programming
   language standard [ISO.9899.1990].

   For example, a property with an unsigned integer value of 0.15 may
   appear as follows:

        example-prop.<m-unique>.zones.$CATZ 0 IN TXT "15e-2"

5.5.  Domain Name

   A key whose value is a domain name is specified using a PTR RR
   [RFC1035], e.g.:

        example-prop.defaults.$CATZ 0 IN PTR ns1.example.com.

5.6.  IP Prefix

   A property whose value is an IP network prefix is specified using an
   APL RR [RFC3123].  The negation flag ("!" in presentation format) may
   be used to indicate all addresses not included within that prefix,
   e.g.  for use in Access Control Lists, e.g.:

   Although a single APL record is capable of containing multiple
   prefixes, for consistency of representation lists of prefixes MUST
   use the multi-valued property syntax as documented in Section 4.2.2,
   e.g.:

        $ORIGIN <m-unique>.zones.$CATZ
        <unique-id-1>.example-prop 0 IN APL ( 1:192.0.2.0/24 )
        <unique-id-2>.example-prop 0 IN APL ( !1:0.0.0.0/0 )





Sivaraman, et al.       Expires September 2, 2018               [Page 9]


Internet-Draft              DNS Catalog Zones                 March 2018


   Implementations MUST accept only the first prefix within each APL
   record and MUST ignore any subsequent prefixes found therein.

5.7.  Single Host Address

   A single host address is represented using either an A or AAAA record
   as appropriate, e.g.:

        example-prop1.<m-unique>.zones.$CATZ 0 IN A 192.0.2.1
        example-prop2.<m-unique>.zones.$CATZ 0 IN AAAA 2001:db8::1

6.  Nameserver Behavior

6.1.  General Requirements

   As it is a regular DNS zone, a catalog zone can be transferred using
   DNS zone transfers among nameservers.

   Although they are regular DNS zones, catalog zones contain only
   information for the management of a set of authoritative nameservers.
   For this reason, operators may want to limit the systems able to
   query these zones.  It may be inconvenient to serve some contents of
   catalog zones via DNS queries anyway due to the nature of their
   representation.  A separate method of querying entries inside the
   catalog zone may be made available by nameserver implementations (see
   Section 6.3).

   Catalog updates should be automatic, i.e., when a nameserver that
   supports catalog zones completes a zone transfer for a catalog zone,
   it SHOULD apply changes to the catalog within the running nameserver
   automatically without any manual intervention.

   As with regular zones, primary and secondary nameservers for a
   catalog zone may be operated by different administrators.  The
   secondary nameservers may be configured to synchronize catalog zones
   from the primary, but the primary's administrators may not have any
   administrative access to the secondaries.

   A catalog zone can be updated via DNS UPDATE on a reference primary
   nameserver, or via zone transfers.  Nameservers MAY allow loading and
   transfer of broken zones with incorrect catalog zone syntax (as they
   are treated as regular zones), but nameservers MUST NOT process such
   broken zones as catalog zones.  For the purpose of catalog
   processing, the broken catalogs MUST be ignored.  If a broken catalog
   zone was transferred, the newly transferred catalog zone MUST be
   ignored (but the older copy of the catalog zone SHOULD be left
   running subject to values in SOA fields).




Sivaraman, et al.       Expires September 2, 2018              [Page 10]


Internet-Draft              DNS Catalog Zones                 March 2018


   If there is a clash between an existing member zone's name and an
   incoming member zone's name (via transfer or update), the new
   instance of the zone MUST be ignored and an error SHOULD be logged.

   When zones are introduced into a catalog zone, a primary SHOULD first
   make the new zones available for transfers before making the updated
   catalog zone available for transfer, or sending NOTIFY for the
   catalog zone to secondaries.  Note that secondary nameservers may
   attempt to transfer the catalog zone upon refresh timeout, so care
   must be taken to make the member zones available before any update to
   the list of member zones is visible in the catalog zone.

   When zones are deleted from a catalog zone, a primary MAY delete the
   member zone immediately after notifying secondaries.  It is up to the
   secondary nameserver to handle this condition correctly.

   TBD: Transitive primary-secondary relationships

6.2.  Updating Catalog Zones

   TBD: Explain updating catalog zones using DNS UPDATE.

6.3.  Implementation Notes

   Catalog zones on secondary nameservers would have to be setup
   manually, perhaps as static configuration, similar to how ordinary
   DNS zones are configured.  Members of such catalog zones will be
   automatically synchronized by the secondary after the catalog zone is
   configured.

   An administrator may want to look at data inside a catalog zone.
   Typical queries might include dumping the list of member zones,
   dumping a member zone's effective configuration, querying a specific
   property value of a member zone, etc.  Because of the structure of
   catalog zones, it may not be possible to perform these queries
   intuitively, or in some cases, at all, using DNS QUERY.  For example
   it is not possible to enumerate the contents of a multi-valued
   property (such as the list of member zones) with a single QUERY.
   Implementations are therefore advised to provide a tool that uses
   either the output of AXFR or an out-of-band method to perform queries
   on catalog zones.

7.  Security Considerations

   As catalog zones are transmitted using DNS zone transfers, it is
   absolutely essential for these transfers to be protected from
   unexpected modifications on the route.  So, catalog zone transfers
   SHOULD be authenticated using TSIG [RFC2845].  A primary nameserver



Sivaraman, et al.       Expires September 2, 2018              [Page 11]


Internet-Draft              DNS Catalog Zones                 March 2018


   SHOULD NOT serve a catalog zone for transfer without using TSIG and a
   secondary nameserver SHOULD abandon an update to a catalog zone that
   was received without using TSIG.

   Use of DNS UPDATE [RFC2136] to modify the content of catalog zones
   SHOULD similarly be authenticated using TSIG.

   Zone transfers of member zones SHOULD similarly be authenticated
   using TSIG [RFC2845].  The TSIG shared secrets used for member zones
   MUST NOT be mentioned anywhere in the catalog zone data.  However,
   key identifiers may be shared within catalog zones.

   Catalog zones do not need to be signed using DNSSEC, their zone
   transfers being authenticated by TSIG.  Signed zones MUST be handled
   normally by nameservers, and their contents MUST NOT be DNSSEC-
   validated.

8.  IANA Considerations

   This document has no IANA actions.

9.  Acknowledgements

   Catalog zones originated as the chosen method among various proposals
   that were evaluated at ISC for easy zone management.  The chosen
   method of storing the catalog as a regular DNS zone was proposed by
   Stephen Morris.

   We later discovered that Paul Vixie's earlier [Metazones] proposal
   implemented a similar approach and reviewed it.  Catalog zones
   borrows some syntax ideas from Metazones, as both share this scheme
   of representing the catalog as a regular DNS zone.

   Thanks to Brian Conry, Tony Finch, Evan Hunt, Patrik Lundin, Victoria
   Risk and Carsten Strettman for reviewing draft proposals and offering
   comments and suggestions.

10.  References

10.1.  Normative references

   [FIPS.180-4.2015]
              National Institute of Standards and Technology, "Secure
              Hash Standard", FIPS PUB 180-4, August 2015,
              <http://csrc.nist.gov/publications/fips/fips180-4/
              fips-180-4.pdf>.





Sivaraman, et al.       Expires September 2, 2018              [Page 12]


Internet-Draft              DNS Catalog Zones                 March 2018


   [ISO.9899.1990]
              International Organization for Standardization,
              "Programming languages - C", ISO Standard 9899, 1990.

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
              November 1987, <https://www.rfc-editor.org/info/rfc1035>.

   [RFC1982]  Elz, R. and R. Bush, "Serial Number Arithmetic", RFC 1982,
              DOI 10.17487/RFC1982, August 1996, <https://www.rfc-
              editor.org/info/rfc1982>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/
              RFC2119, March 1997, <https://www.rfc-editor.org/info/
              rfc2119>.

   [RFC2136]  Vixie, P., Ed., Thomson, S., Rekhter, Y., and J. Bound,
              "Dynamic Updates in the Domain Name System (DNS UPDATE)",
              RFC 2136, DOI 10.17487/RFC2136, April 1997,
              <https://www.rfc-editor.org/info/rfc2136>.

   [RFC2308]  Andrews, M., "Negative Caching of DNS Queries (DNS
              NCACHE)", RFC 2308, DOI 10.17487/RFC2308, March 1998,
              <https://www.rfc-editor.org/info/rfc2308>.

   [RFC2606]  Eastlake 3rd, D. and A. Panitz, "Reserved Top Level DNS
              Names", BCP 32, RFC 2606, DOI 10.17487/RFC2606, June 1999,
              <https://www.rfc-editor.org/info/rfc2606>.

   [RFC2845]  Vixie, P., Gudmundsson, O., Eastlake 3rd, D., and B.
              Wellington, "Secret Key Transaction Authentication for DNS
              (TSIG)", RFC 2845, DOI 10.17487/RFC2845, May 2000,
              <https://www.rfc-editor.org/info/rfc2845>.

   [RFC3123]  Koch, P., "A DNS RR Type for Lists of Address Prefixes
              (APL RR)", RFC 3123, DOI 10.17487/RFC3123, June 2001,
              <https://www.rfc-editor.org/info/rfc3123>.

10.2.  Informative references

   [Metazones]
              Vixie, P., "Federated Domain Name Service Using DNS
              Metazones", 2005, <http://ss.vix.su/~vixie/mz.pdf>.

   [RPZ]      Vixie, P. and V. Schryver, "DNS Response Policy Zones (DNS
              RPZ)", 2010,
              <http://ftp.isc.org/isc/dnsrpz/isc-tn-2010-1.txt>.



Sivaraman, et al.       Expires September 2, 2018              [Page 13]


Internet-Draft              DNS Catalog Zones                 March 2018


Appendix A.  Open issues and discussion (to be removed before final
             publication)

   1.  Config options

       We want catalog zones to be adopted by multiple DNS
       implementations.  Towards this, we have to generalize zone config
       options and adopt a minimal set that we can expect most
       implementations to support.

   2.  Catalog zone and member zones on different primary nameservers

       Will it be possible to setup a catalog zone on one nameserver as
       primary, and allow its member zones to be served by different
       primary nameservers?

   3.  Transitive relationships

       For a catalog zone, a secondary nameserver may be a primary
       nameserver to a different set of nameservers in a nameserver
       farm.  In these transitive relationships, zone configuration
       options (such as also-notify and allow-transfer) may differ based
       on the location of the primary in the hierarchy.  It may not be
       possible to specify this within a catalog zone.

   4.  Overriding controls

       A way to override zone config options (as prescribed by the
       catalog zones) on secondary nameservers was requested.  As this
       would be configured outside catalog zones, it may be better to
       leave this to implementations.

Appendix B.  Change History (to be removed before final publication)

   o  draft-muks-dnsop-dns-catalog-zones-00
      Initial public draft.

   o  draft-muks-dnsop-dns-catalog-zones-01
      Added Witold, Ray as authors.  Fixed typos, consistency issues.
      Fixed references.  Updated Area.  Removed newly introduced custom
      RR TYPEs.  Changed schema version to 1.  Changed TSIG requirement
      from MUST to SHOULD.  Removed restrictive language about use of
      DNS QUERY.  When zones are introduced into a catalog zone, a
      primary SHOULD first make the new zones available for transfers
      first (instead of MUST).  Updated examples, esp. use IPv6 in
      examples per Fred Baker.  Add catalog zone example.

   o  draft-muks-dnsop-dns-catalog-zones-02



Sivaraman, et al.       Expires September 2, 2018              [Page 14]


Internet-Draft              DNS Catalog Zones                 March 2018


      Addressed some review comments by Patrik Lundin.

   o  draft-muks-dnsop-dns-catalog-zones-03
      Revision bump.

   o  draft-muks-dnsop-dns-catalog-zones-04
      Reordering of sections into more logical order.
      Separation of multi-valued properties into their own category.

Authors' Addresses

   Mukund Sivaraman
   Internet Systems Consortium
   950 Charter Street
   Redwood City, CA  94063
   US

   Email: muks@mukund.org
   URI:   http://www.isc.org/


   Stephen Morris
   Internet Systems Consortium
   950 Charter Street
   Redwood City, CA  94063
   US

   Email: stephen@isc.org
   URI:   http://www.isc.org/


   Ray Bellis
   Internet Systems Consortium
   950 Charter Street
   Redwood City, CA  94063
   US

   Email: ray@isc.org
   URI:   http://www.isc.org/












Sivaraman, et al.       Expires September 2, 2018              [Page 15]


Internet-Draft              DNS Catalog Zones                 March 2018


   Witold Krecicki
   Internet Systems Consortium
   950 Charter Street
   Redwood City, CA  94063
   US

   Email: wpk@isc.org
   URI:   http://www.isc.org/











































Sivaraman, et al.       Expires September 2, 2018              [Page 16]