Internet Draft                                               K. Murchison
Category: Informational                                        M. Crispin
Expires: March 2, 2004                                     28 August 2003


                          The LOGIN SASL Mechanism

                     <draft-murchison-sasl-login-00.txt>


Status of this Memo

    This document is an Internet-Draft and is subject to all provisions
    of Section 10 of RFC2026.

    Internet-Drafts are working documents of the Internet Engineering
    Task Force (IETF), its areas, and its working groups.  Note that
    other groups may also distribute working documents as
    Internet-Drafts.

    Internet-Drafts are draft documents valid for a maximum of six months
    and may be updated, replaced, or obsoleted by other documents at any
    time.  It is inappropriate to use Internet-Drafts as reference
    material or to cite them other than as "work in progress."

    The list of current Internet-Drafts can be accessed at
    http://www.ietf.org/1id-abstracts.html

    The list of Internet-Draft Shadow Directories can be accessed at
    http://www.ietf.org/shadow.html


Copyright Notice

    Copyright (C) The Internet Society 2003. All Rights Reserved.


Abstract

    This document documents the obsolete clear-text user/password Simple
    Authentication and Security Layer (SASL) mechanism called the LOGIN
    mechanism.  The LOGIN mechanism was intended to be used, in
    combination with data confidentiality services provided by a lower
    layer, in protocols which lack a simple password authentication
    command.






Expires: March 2, 2004        Murchison                         [Page 1]


Internet Draft            LOGIN SASL Mechanism           August 28, 2004



Conventions Used in the Document

    The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
    "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
    document are to be interpreted as described in [KEYWORDS].


1.  Background and Intended Usage

    This document documents the obsolete LOGIN Simple Authentication and
    Security Layer ([SASL]) mechanism which was in use in protocols with
    no clear-text login command (e.g., [SMTP-AUTH]).

    Note: The LOGIN SASL mechanism is obsoleted in favor of the PLAIN
    SASL mechanism ([PLAIN]).  The LOGIN mechanism is documented here
    only for the purpose of backwards compatibility with legacy software.
    Clients SHOULD implement the PLAIN SASL mechanism and use it whenever
    offered by a server.  The LOGIN SASL mechanism SHOULD NOT be used by
    a client when other plaintext mechanisms are offered by a server.

    The name associated with this mechanism is "LOGIN".

    The LOGIN SASL mechanism does not provide a security layer.  This
    mechanism MUST NOT be used without adequate security protection as
    the mechanism affords no integrity nor confidentiality protection
    itself.  The LOGIN SASL mechanism MUST NOT be advertised or used in
    any configuration that prohibits the PLAIN mechanism or plaintext
    LOGIN (or USER/PASS) command that sends passwords in the clear.


2.  LOGIN SASL Mechanism

    The authorization identity is the same string as the "username" in
    the traditional (non-SASL) LOGIN or USER commands; the authorization
    authenticator is the same string as the traditional "password".  The
    authentication identity is the same as the authorization identity in
    this mechanism.

    Only US-ASCII printable characters SHOULD be used in the username and
    password to permit maximal interoperability.  If non-US-ASCII
    characters are used in a username, they MUST use UTF-8.  Passwords
    MAY contain arbitrary binary data excluding NUL, CR and LF
    characters.  However, if a password is supplied to the client as a
    sequence of characters (e.g., a password dialog box), those
    characters MUST be encoded as UTF-8.

    The username MUST be less than 64 characters in length.



Expires: March 2, 2004        Murchison                         [Page 2]


Internet Draft            LOGIN SASL Mechanism           August 28, 2004


2.1.  Client side of authentication protocol exchange

    The client expects the server to issue a challenge.  The client then
    responds with the authorization identity.  The client then expects
    the server to issue a second challenge.  The client then responds
    with the authorization authenticator.  The contents of both
    challenges SHOULD be ignored.


2.2.  Server side of authentication protocol exchange

    The server issues the string "User Name" in challenge, and receives a
    client response.  This response is recorded as the authorization
    identity.  The server then issues the string "Password" in challenge,
    and receives a client response.  This response is recorded as the
    authorization authenticator.  The server must verify that the
    authorization authenticator permits login as the authorization
    identity.

    Note: There is at least one widely deployed client which requires
    that the challenge strings transmitted by the server be "Username:"
    and "Password:" respectively.  For this reason, server
    implementations MAY send these challenge strings instead of those
    listed above.


2.3.  Example

    This example shows the use of the LOGIN mechanism with the SMTP AUTH
    command [SMTP-AUTH] under the protection of SMTP STARTTLS [SMTP-TLS].
    The user name is "tim" and the password is "tanstaaftanstaaf".  The
    base64 encoding of the challenges and responses is part of the SMTP
    AUTH command, not part of the LOGIN specification itself.  "C:" and
    "S:" indicate lines sent by the client and server respectively.

    S: 220 smtp.example.com ESMTP server ready
    C: EHLO test.example.com
    S: 250-smtp.example.com
    S: 250-STARTTLS
    S: 250 AUTH CRAM-MD5
    C: STARTTLS
    S: 220 Ready to start TLS
    <TLS negotiation, further commands are under TLS layer>
    C: EHLO test.example.com
    S: 250-smtp.example.com
    S: 250 AUTH LOGIN CRAM-MD5
    C: AUTH LOGIN
    S: 334 VXNlciBOYW1lAA==



Expires: March 2, 2004        Murchison                         [Page 3]


Internet Draft            LOGIN SASL Mechanism           August 28, 2004


    C: dGlt
    S: 334 UGFzc3dvcmQA
    C: dGFuc3RhYWZ0YW5zdGFhZg==
    S: 235 Authentication successful.


3.
    Security Considerations

    The LOGIN mechanism relies upon an underlying encryption layer or
    other secure channel for security.  When used without an encryption
    layer or secure channel, it is vulnerable to a common network
    eavesdropping attack.  Therefore the LOGIN mechanism MUST NOT be
    advertised or used in any configuration that prohibits the PLAIN
    mechanism or a plaintext LOGIN (or USER/PASS) command that sends
    passwords in the clear.


4.
    IANA Considerations

    The registration for the LOGIN SASL mechanism follows:

    SASL mechanism name: LOGIN
    Security Considerations: See section 3 of this memo
    Published specification: this memo
    Person & email address to contact for futher information:
        See section 7 of this memo
    Intended usage: OBSOLETE
    Owner/Change controller: See section 7 of this memo


5.
    References


5.1.
    Normative References


     [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
         Requirement Levels", Harvard University, RFC 2119, March 1997.


     [SASL] Melnikov, A., Ed., "Simple Authentication and Security Layer
         (SASL)", Isode, draft-ietf-sasl-rfc2222bis-xx.txt, Work In
         Progress.




Expires: March 2, 2004        Murchison                         [Page 4]


Internet Draft            LOGIN SASL Mechanism           August 28, 2004


5.2.  Informative References


     [PLAIN] Zeilenga, Kurt D., Ed., "The Plain SASL Mechanism",
         OpenLDAP Foundation, draft-ietf-sasl-plain-xx.txt, Work In
         Progress.


     [SMTP-AUTH] Myers, J., "SMTP Service Extension for Authentication",
         Netscape Communications, RFC 2554, March 1999.


     [SMTP-TLS] Hoffman, P., "SMTP Service Extension for Secure SMTP
         over Transport Layer Security", Internet Mail Consortium, RFC
         3207, February 2002.



6.  Acknowledgments

    Thanks to Rob Siemborski for his input and feedback on this document.


7.
    Author's Address

    Kenneth Murchison
    Oceana Matrix Ltd.
    21 Princeton Place
    Orchard Park, NY  14127

    Phone: (716) 662-8973

    EMail: ken@oceana.com




    Mark R. Crispin
    Networks and Distributed Computing
    University of Washington
    4545 15th Avenue NE
    Seattle, WA  98105-4527

    Phone: (206) 543-5762

    EMail: MRC@CAC.Washington.EDU




Expires: March 2, 2004        Murchison                         [Page 5]


Internet Draft            LOGIN SASL Mechanism           August 28, 2004


8.
    Intellectual Property Considerations

    The IETF takes no position regarding the validity or scope of any
    intellectual property or other rights that might be claimed to
    pertain to the implementation or use of the technology described in
    this document or the extent to which any license under such rights
    might or might not be available; neither does it represent that it has
    made any effort to identify any such rights.  Information on the
    IETF's procedures with respect to rights in standards-track and
    standards-related documentation can be found in BCP-11.  Copies of
    claims of rights made available for publication and any assurances of
    licenses to be made available, or the result of an attempt made to
    obtain a general license or permission for the use of such proprietary
    rights by implementors or users of this specification can be obtained
    from the IETF Secretariat.

    The IETF invites any interested party to bring to its attention any
    copyrights, patents or patent applications, or other proprietary
    rights which may cover technology that may be required to practice
    this standard.  Please address the information to the IETF Executive
    Director.





























Expires: March 2, 2004        Murchison                         [Page 6]


Internet Draft            LOGIN SASL Mechanism           August 28, 2004


9.
    Full Copyright Statement

    Copyright (C) The Internet Society 2003. All Rights Reserved.

    This document and translations of it may be copied and furnished to
    others, and derivative works that comment on or otherwise explain it
    or assist in its implmentation may be prepared, copied, published and
    distributed, in whole or in part, without restriction of any kind,
    provided that the above copyright notice and this paragraph are
    included on all such copies and derivative works.  However, this
    document itself may not be modified in any way, such as by removing
    the copyright notice or references to the Internet Society or other
    Internet organizations, except as needed for the  purpose of
    developing Internet standards in which case the procedures for
    copyrights defined in the Internet Standards process must be followed,
    or as required to translate it into languages other than English.

    The limited permissions granted above are perpetual and will not be
    revoked by the Internet Society or its successors or assigns.

    This document and the information contained herein is provided on an
    "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
    ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
    INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
    INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
    WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
























Expires: March 2, 2004        Murchison                         [Page 7]