HTTP Working Group                                           B. Schwartz
Internet-Draft                                                    Google
Intended status: Standards Track                               M. Bishop
Expires: January 9, 2020                                       E. Nygren
                                                     Akamai Technologies
                                                            July 8, 2019


 HTTPSSVC service location and parameter specification via the DNS (DNS
                               HTTPSSVC)
                    draft-nygren-httpbis-httpssvc-03

Abstract

   This document specifies an "HTTPSSVC" DNS resource record type to
   facilitate the lookup of information needed to make connections for
   HTTPS URIs.  The HTTPSSVC DNS RR mechanism allows an HTTPS origin
   hostname to be served from multiple network services, each with
   associated parameters (such as transport protocol and keying material
   for encrypting TLS SNI).  It also provides a solution for the
   inability of the DNS to allow a CNAME to be placed at the apex of a
   domain name.  Finally, it provides a way to indicate that the origin
   supports HTTPS without having to resort to redirects, allowing
   clients to remove HTTP from the bootstrapping process.

   By allowing this information to be bootstrapped in the DNS, it allows
   for clients to learn of alternative services before their first
   contact with the origin.  This arrangement offers potential benefits
   to both performance and privacy.

   TO BE REMOVED: This proposal is inspired by and based on recent DNS
   usage proposals such as ALTSVC, ANAME, and ESNIKEYS (as well as long
   standing desires to have SRV or a functional equivalent implemented
   for HTTP).  These proposals each provide an important function but
   are potentially incompatible with each other, such as when an origin
   is load-balanced across multiple hosting providers (multi-CDN).
   Furthermore, these each add potential cases for adding additional
   record lookups in-addition to AAAA/A lookups.  This design attempts
   to provide a unified framework that encompasses the key functionality
   of these proposals, as well as providing some extensibility for
   addressing similar future challenges.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.





Schwartz, et al.         Expires January 9, 2020                [Page 1]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 9, 2020.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Introductory Example  . . . . . . . . . . . . . . . . . .   4
     1.2.  Goals of the HTTPSSVC RR  . . . . . . . . . . . . . . . .   4
     1.3.  Overview of the HTTPSSVC RR . . . . . . . . . . . . . . .   5
     1.4.  Additional Alt-Svc parameters . . . . . . . . . . . . . .   6
     1.5.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   6
   2.  The HTTPSSVC record type  . . . . . . . . . . . . . . . . . .   7
     2.1.  HTTPSSVC RDATA Wire Format  . . . . . . . . . . . . . . .   7
     2.2.  RRNames . . . . . . . . . . . . . . . . . . . . . . . . .   8
     2.3.  SvcRecordType . . . . . . . . . . . . . . . . . . . . . .   8
     2.4.  HTTPSSVC records: alias form  . . . . . . . . . . . . . .   9
     2.5.  HTTPSSVC records: alternative service form  . . . . . . .   9
   3.  Differences from Alt-Svc as transmitted over HTTP . . . . . .  10
     3.1.  Omitting Max Age and Persist  . . . . . . . . . . . . . .  10
     3.2.  Multiple records and preference ordering  . . . . . . . .  11
     3.3.  Constructing Alt-Svc equivalent headers . . . . . . . . .  11
     3.4.  Granularity and lifetime control  . . . . . . . . . . . .  12
   4.  Client behaviors  . . . . . . . . . . . . . . . . . . . . . .  12
     4.1.  Client resolution . . . . . . . . . . . . . . . . . . . .  12



Schwartz, et al.         Expires January 9, 2020                [Page 2]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


     4.2.  HTTP Strict Transport Security  . . . . . . . . . . . . .  13
     4.3.  Cache interaction . . . . . . . . . . . . . . . . . . . .  14
   5.  DNS Server Behaviors  . . . . . . . . . . . . . . . . . . . .  14
   6.  Performance optimizations . . . . . . . . . . . . . . . . . .  14
   7.  Extensions to enhance privacy . . . . . . . . . . . . . . . .  15
     7.1.  Alt-Svc parameter for ESNI keys . . . . . . . . . . . . .  15
     7.2.  Interaction with other standards  . . . . . . . . . . . .  15
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  16
   9.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  16
   10. Acknowledgements and Related Proposals  . . . . . . . . . . .  17
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . .  17
     11.1.  Normative References . . . . . . . . . . . . . . . . . .  17
     11.2.  Informative References . . . . . . . . . . . . . . . . .  19
   Appendix A.  Additional examples  . . . . . . . . . . . . . . . .  20
     A.1.  Equivalence to Alt-Svc records  . . . . . . . . . . . . .  20
   Appendix B.  Comparison with alternatives . . . . . . . . . . . .  20
     B.1.  Differences from the SRV RRTYPE . . . . . . . . . . . . .  20
     B.2.  Differences from the proposed HTTP record . . . . . . . .  21
     B.3.  Differences from the proposed ANAME record  . . . . . . .  21
     B.4.  Differences from the proposed ESNI record . . . . . . . .  21
     B.5.  SNI Alt-Svc parameter . . . . . . . . . . . . . . . . . .  22
   Appendix C.  Design Considerations and Open Issues  . . . . . . .  22
     C.1.  Record Name . . . . . . . . . . . . . . . . . . . . . . .  22
     C.2.  Applicability to other schemes  . . . . . . . . . . . . .  22
     C.3.  Wire Format . . . . . . . . . . . . . . . . . . . . . . .  22
     C.4.  Extensibility of SvcRecordType  . . . . . . . . . . . . .  22
     C.5.  Where to include Priority . . . . . . . . . . . . . . . .  22
     C.6.  Whether to include Weight . . . . . . . . . . . . . . . .  23
   Appendix D.  Change history . . . . . . . . . . . . . . . . . . .  23
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  23

1.  Introduction

   The HTTPSSVC RR is intended to address a number of challenges facing
   HTTPS clients and services, while also providing an extensible model
   to handle similar use-cases without forcing clients to perform
   additional DNS lookups and without forcing them to first make
   connections to a default service for the origin.

   When clients need to make a connection to fetch resources associated
   with an HTTPS URI, they must first resolve A and/or AAAA address
   resource records for the origin hostname.  This is adequate when
   clients default to TCP port 443, do not support Encrypted SNI [ESNI],
   and where the origin service operator does not have a desire to put
   an CNAME at a zone apex (such as for "https://example.com").
   Handling situations beyond this within the DNS requires learning
   additional information, and it is highly desirable to minimize the




Schwartz, et al.         Expires January 9, 2020                [Page 3]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   number of round-trip and lookups required to learn this additional
   information.

1.1.  Introductory Example

   As an introductory example, a set of example HTTPSSVC and associated
   A+AAAA records might be:

www.example.com.  2H  IN CNAME   svc.example.net.
example.com.      2H  IN HTTPSSVC 0 0 svc.example.net.
svc.example.net.  2H  IN HTTPSSVC 1 2 svc3.example.net. "h3=\":8003\"; \
                                   esnikeys=\"...\""
svc.example.net.  2H  IN HTTPSSVC 1 3 svc2.example.net. "h2=\":8002\"; \
                                   esnikeys=\"...\""
svc2.example.net. 300 IN A       192.0.2.2
svc2.example.net. 300 IN AAAA    2001:db8::2
svc3.example.net. 300 IN A       192.0.2.3
svc3.example.net. 300 IN AAAA    2001:db8::3

   In the preceding example, both of the "example.com" and
   "www.example.com" origin names are aliased to use service endpoints
   offered as "svc.example.net" (with "www.example.com" continuing to
   use a CNAME alias).  HTTP/2 is available on a cluster of machines
   located at svc2.example.net with TCP port 8002 and HTTP/3 is
   available on a cluster of machines located at svc3.example.net with
   UDP port 8003.  An ESNI key is specified which allows the SNI values
   of "example.com" and "www.example.com" to be encrypted in the
   handshake with these service endpoints.  When connecting, clients
   will continue to treat the authoritative origins as
   "https://example.com" and "https://www.example.com", respectively.

1.2.  Goals of the HTTPSSVC RR

   The goal of the HTTSSVC RR is to allow clients to resolve a single
   additional DNS RR in a way that:

   o  Provides service endpoints authoritative for an origin, along with
      parameters associated with each of these endpoints.  In
      particular:

      *  to support connecting directly to [HTTP3] (QUIC transport)
         service endpoints

      *  to obtain the [ESNI] keys associated with a service endpoint

   o  Does not assume that all service endpoints have the same
      parameters (such as ESNI keys) or capabilities (such as [HTTP3])
      or are even operated by the same entity.  This is important as DNS



Schwartz, et al.         Expires January 9, 2020                [Page 4]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


      does not provide any way to tie together multiple RRs for the same
      name.  For example, if www.example.com is a CNAME alias that
      switches between one of three CDNs or hosting enviroments, records
      (such as A and AAAA) for that name may have been sourced from
      different environments.

   o  Enables the functional equivalent of a CNAME at a zone apex (such
      as "example.com") for HTTPS traffic, and generally enables
      delegation of operational authority for an HTTPS origin within the
      DNS to an alternate name.  This addresses a set of long-standing
      issues due to HTTP(S) clients not implementing support for SRV
      records, as well as due to a limitation that a DNS name can not
      have both a CNAME record as well as NS RRs (as is the case for
      zone apex names)

1.3.  Overview of the HTTPSSVC RR

   This subsection briefly describes the HTTPSSVC RR in a non-normative
   manner.

   The HTTPSSVC RR has four primary fields:

   1.  SvcRecordType: A numeric flag indicating how to interpret the
       subsequent fields.  When "0", it indicates that the RR contains
       an alias.  When "1", it indicates that the RR contains an
       alternative service definition.

   2.  SvcFieldPriority: The priority of this record (relative to
       others, with lower values preferred).  Applicable when
       SvcRecordType is "1", and otherwise has value "0".  (Described in
       Section 3.2.)

   3.  SvcDomainName: The domain name of either the alias target (when
       SvcRecordType is "0") or the uri-host domain name of the
       alternative service endpoint (when SvcRecordType is "1").

   4.  SvcFieldValue: An Alternative Service field value describing the
       alternative service endpoint for the domain name specified in
       SvcDomainName (only when SvcRecordType is "1" and otherwise
       empty).

   Cooperating DNS recursive resolvers will perform subsequent record
   resolution (for HTTPSSVC, A, and AAAA records) and return them in the
   Additional Section of the response.  Clients must either use
   responses included in the additional section returned by the
   recursive resolver or perform necessary HTTPSSVC, A, and AAAA record
   resolutions.  DNS authoritative servers may attach in-bailiwick




Schwartz, et al.         Expires January 9, 2020                [Page 5]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   HTTPSSVC, A, AAAA, and CNAME records in the Additional Section to
   responses for an HTTPSSVC query.

   When SvcRecordType is "1", the HTTPSSVC RR extends the concept
   introduced in the HTTP Alternative Services proposed standard
   [AltSvc].  Alt-Svc defines:

   o  an extensible data model for describing alternative network
      endpoints that are authoritative for an origin

   o  the "Alt-Svc Field Value", a text format for representing this
      information

   o  standards for sending information in this format from a server to
      a client over HTTP/1.1 and HTTP/2.

   Together, these components provide a toolkit that has proven useful
   and effective for informing a client of alternative services for an
   origin.  However, making use of an alternative service requires
   contacting the origin server first.  This creates an obvious
   performance cost: users wait for a full HTTP connection initiation
   (multiple roundtrips) before learning of an alternative service that
   is preferred by the origin.  The first connection also publicly
   reveals the user's intended destination to all entities along the
   network path.

   The SvcFieldValue includes the Alt-Svc Field Value through the DNS.
   This is in its standard text format, with the uri-host portion of the
   alt-authority component moved into the SvcDomainName field of the
   HTTPSSVC RR.  A client receiving this information during DNS
   resolution can skip the initial connection and proceed directly to an
   alternative service.

1.4.  Additional Alt-Svc parameters

   This document also defines one additional Alt-Svc parameter that can
   be used within SvcFieldValue:

   o  esnikeys (Section 7.1): The ESNIKeys structure from Section 4.1 of
      [ESNI] for use in encrypting the actual origin hostname in the TLS
      handshake.

1.5.  Terminology

   For consistency with [AltSvc], we adopt the following definitions:

   o  An "origin" is an information source as in [RFC6454].




Schwartz, et al.         Expires January 9, 2020                [Page 6]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   o  The "origin server" is the server that the client would reach when
      accessing the origin in the absence of Alt-Svc.

   o  An "alternative service" is a different server that can serve the
      origin.

   Abstractly, the origin consists of a scheme (typically "https"), a
   host name, and a port (typically "443").

   Additional DNS terminology intends to be consistent with [DNSTerm].

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

2.  The HTTPSSVC record type

   The HTTPSSVC DNS resource record (RR) type (RRTYPE ???) is used to
   locate endpoints that can service an "https" origin.  The
   presentation format of the record is:

   RRName TTL Class HTTPSSVC SvcRecordType SvcFieldPriority \
   SvcDomainName SvcFieldValue

   where SvcRecordType is a numeric value of either "0" or "1",
   SvcFieldPriority is a number in the range 0-65535, SvcDomainName is a
   domain name, and SvcFieldValue is a string present when SvcRecordType
   is "1".

   The algorithm for resolving HTTPSSVC records and associated address
   records is specified in Section 4.1.

2.1.  HTTPSSVC RDATA Wire Format

   The RDATA for the HTTPSSVC RR consists of:

   o  a 1 octet flag field for SvcRecordType, interpreted as an unsigned
      numeric value (0 to 255, with only values "0" and "1" defined
      here)

   o  a 2 octet field for SvcFieldPriority as an integer in network byte
      order.  If SvcRecordType is "0", SvcFieldPriority MUST be 0.

   o  the uncompressed SvcDomainName, represented as a sequence of
      length-prefixed labels as in Section 3.1 of [RFC1035].




Schwartz, et al.         Expires January 9, 2020                [Page 7]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   o  the SvcFieldValue byte string, consuming the remainder of the
      record (so smaller than 65535 octets and constrained by the RRDATA
      and DNS message sizes).

   When SvcRecordType is "0", the SvcFieldValue SHOULD be empty ("") and
   clients MUST ignore the contents of non-empty SvcFieldValue fields.

2.2.  RRNames

   In the case of the HTTPSSVC RR, an origin is translated into the
   RRName in the following manner:

   1.  If the scheme is "https" and the port is 443, then the RRName is
       equal to the origin host name.  Otherwise the RRName is
       represented by prefixing the port and scheme with "_", then
       concatenating them with the host name, resulting in a domain name
       like "_8443._https.www.example.com.".

   2.  When a prior CNAME or HTTPSSVC record has aliased to an HTTPSSVC
       record, RRName shall be the name of the alias target.

   Note that none of these forms alter the HTTPS origin or authority.
   For example, clients MUST continue to validate TLS certificate
   hostnames based on the origin host.

   As an example for schemes and ports other than "https" and port 443:

_8443._wss.api.example.com. 2H IN HTTPSSVC 0 0 svc4.example.net.
svc4.example.net.  2H  IN HTTPSSVC 1 3 svc4.example.net. "h2=\":8004\"; \
                                   esnikeys=\"...\""

   would indicate that "wss://api.example.com:8443" is aliased to use
   HTTP/2 service endpoints offered as "svc4.example.net" on port 8004.

2.3.  SvcRecordType

   The SvcRecordType field is a numeric value defined to be either "0"
   or "1".  Within an HTTPSSVC RRSet, all RRs must have the same value
   for SvcRecordType.  Clients and recursive servers MUST ignore
   HTTPSSVC resource records with other SvcRecordType values.  If an
   RRSet contains a record with type "0", the client MUST ignore any
   records in the set with type "1".

   When SvcRecordType is "0", the HTTPSSVC is defined to be in "alias
   form".

   When SvcRecordType is "1", the HTTPSSVC is defined to be in
   "alternative service form".



Schwartz, et al.         Expires January 9, 2020                [Page 8]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


2.4.  HTTPSSVC records: alias form

   When SvcRecordType is "0", the HTTPSSVC record is to be treated
   similar to a CNAME alias pointing to the domain name specified in
   SvcDomainName.  HTTPSSVC RRSets MUST only have a single resource
   record in this form.  If multiple are present, clients or recursive
   resolvers SHOULD pick one non-determinstically.

   The common use-case for this form of the HTTPSSVC record is as an
   alternative to CNAMEs at the zone apex where they are not allowed.
   For example, if an operator of https://example.com wanted to point
   HTTPS requests to a service operating at svc.example.net, they would
   publish a record such as:

   example.com. 3600 IN HTTPSSVC 0 0 svc.example.net.

   The SvcDomainName MUST point to a domain name that contains another
   HTTPSSVC record and/or address (AAAA and/or A) records.

   Note that the RRName and the SvcDomainName MAY themselves be CNAMEs.
   Clients and recursive resolvers MUST follow CNAMEs as normal.

   Due to the risk of loops, clients and recursive resolvers MUST
   implement loop detection.  Chains of consecutive HTTPSSVC and CNAME
   records SHOULD be limited to (8?) prior to reaching terminal address
   records.

   The SvcFieldValue in this form SHOULD be an empty string and clients
   MUST ignore its contents.

   As legacy clients will not know to use this record, service operators
   will likely need to retain fallback AAAA and A records alongside this
   HTTPSSVC record, although in a common case the target of the HTTPSSVC
   record might have better performance, and therefore would be
   preferable for clients implementing this specification to use.

2.5.  HTTPSSVC records: alternative service form

   When SvcRecordType is "1", the combination of SvcDomainName and
   SvcFieldValue within each resource record associates an Alternative
   Service Field Value with an origin.

   The SvcFieldValue of the HTTPSSVC resource record contains an Alt-Svc
   Field Value, exactly as defined in Section 4 of [AltSvc], but with
   the uri-host moved to the SvcDomainName field.

   For example, if the operator of https://www.example.com intends to
   include an HTTP response header like



Schwartz, et al.         Expires January 9, 2020                [Page 9]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   Alt-Svc: h3="svc.example.net:8003"; ma=3600, \
            h2="svc.example.net:8002"; ma=3600

   they could also publish an HTTPSSVC DNS RRSet like

   www.example.com. 3600 IN HTTPSSVC 1 2 svc.example.net. "h3=\":8003\""
                            HTTPSSVC 1 3 svc.example.net. "h2=\":8002\""

   This data type can be represented as an Unknown RR as described in
   [RFC3597]:

   www.example.com. 3600 IN TYPE??? \\# TBD:WRITEME

   This construction is intended to be extensible in two ways.  First,
   any extensions that are made to the Alt-Svc format for transmission
   over HTTPS are also applicable here, unless expressly mentioned
   otherwise.

   Second, by defining a way to map non-HTTPS schemes and non-default
   ports (Section 2.2), we provide a way for the HTTPSSVC to be used for
   them as needed.  However, by using the origin name for the RRName for
   scheme https and port 443 we allow HTTPSSVC records to be included at
   the end of CNAME chains for existing site implementations without
   requiring changes in the zone containing the origin.

3.  Differences from Alt-Svc as transmitted over HTTP

   Publishing an alternative services form HTTPSSVC record in DNS is
   intended to be equivalent to transmitting this field value over
   HTTPS, and receiving an HTTPSSVC record is intended to be equivalent
   to receiving this field value over HTTPS.  However, there are some
   small differences in the intended client and server behavior.

3.1.  Omitting Max Age and Persist

   When publishing an HTTPSSVC record in DNS, server operators MUST omit
   the "ma" parameter, which encodes the "max age" (i.e. expiration
   time) of an Alt-Svc Field Value.  Instead, server operators SHOULD
   encode the expiration time in the DNS TTL, and MUST NOT set a TTL
   longer than the intended "max age".

   When receiving an HTTPSSVC record, clients SHOULD synthesize a new
   "ma" parameter from the DNS TTL if the resulting alt-value is being
   passed to a subsystem that might employ caching.

   When publishing an HTTPSSVC record, server operators MUST omit the
   "persist" parameter, which indicates whether the client should use
   this record on other network paths.  When receiving an HTTPSSVC



Schwartz, et al.         Expires January 9, 2020               [Page 10]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   record, clients MUST discard any records that contain a "persist"
   flag.  Disabling persistence is important to prevent a local
   adversary in one network from implanting a forged DNS record that
   allows them to track users or hinder their connections after they
   leave that network.

3.2.  Multiple records and preference ordering

   Server operators MAY publish multiple SvcRecordType "1" HTTPSSVC
   records as an RRSET.  When converting a collection of alt-values into
   an HTTPSSVC RRSET, the server operator MUST set the overall TTL to a
   value no larger than the minimum of the "max age" values (following
   Section 5.2 of [RFC2181]).

   Each RR MUST contain exactly one alt-value, as described in Section 3
   of [AltSvc].

   As RRs within an RRSET are explicitly unordered collections, the
   SvcFieldPriority value is introduced to indicate priority.  HTTPSSVC
   RRs with a smaller SvcFieldPriority value SHOULD be given preference
   over RRs with a larger SvcFieldPriority value.

   Alt-values received via HTTPS are preferred over any Alt-value
   received via DNS.

   When receiving an RRSET containing multiple HTTPSSVC records with the
   same SvcFieldPriority value, clients SHOULD apply a random shuffle
   within a priority level to the records before using them, to ensure
   randomized load-balancing.

3.3.  Constructing Alt-Svc equivalent headers

   For a client to construct the equivalent of an Alt-Svc HTTP response
   header:

   1.  For each RR, the SvcDomainName MUST be inserted as the uri-host.
       If SvcDomainName is has the value "." then the RRNAME for the
       final HTTPSSVC record MUST be inserted as the uri-host.  (In the
       case of a CNAME or a HTTPSSVC SvcRecordType "0" record pointing
       to an HTTPSSVC record with SvcRecordType "1" and SvcDomainName
       "." then it is the RRNAME for the terminal HTTPSSVC record that
       must be inserted as the uri-host.)

   2.  The RRs SHOULD be ordered by increasing SvcFieldPriority, with
       shuffling for equal SvcFieldPriority values.  Clients MAY choose
       to further prioritize alt-values where address records are
       immediately available for the alt-value's SvcDomainName.




Schwartz, et al.         Expires January 9, 2020               [Page 11]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   3.  The client SHOULD concatenate the thus-transformed-and-ordered
       SvcFieldValues in the RRSET, separated by commas.  (This is
       semantically equivalent to receiving multiple Alt-Svc HTTP
       response headers, according to Section 3.2.2 of [HTTP]).

3.4.  Granularity and lifetime control

   Sending Alt-Svc over HTTP allows the server to tailor the Alt-Svc
   Field Value specifically to the client.  When using an HTTPSSVC DNS
   record, groups of clients will necessarily receive the same Alt-Svc
   Field Value.  Therefore, this standard is not suitable for uses that
   require single-client granularity in Alt-Svc.

   Some DNS caching systems incorrectly extend the lifetime of DNS
   records beyond the stated TTL.  Server operators MUST NOT rely on
   HTTPSSVC records expiring on time, and MAY shorten the TTL to
   compensate.

4.  Client behaviors

4.1.  Client resolution

   When attempting to resolve a name HOST, clients should follow in-
   order:

   1.  Issue parallel AAAA/A and HTTPSSVC queries for the name HOST.
       The answers for these may or may not include CNAME pointers
       before reaching one or more of these records.

   2.  If an HTTPSSVC record of SvcRecordType "0" is returned for HOST,
       clients should loop back to step 1 replacing HOST with
       SvcDomainName, subject to loop detection heuristics.

   3.  If one or more HTTPSSVC record of SvcRecordType "1" is returned
       for HOST, clients should synthesize equivalent Alt-Svc Field
       Values based on the SvcDomainName and SvcFieldValue.  If one of
       these alt-values is selected to be used in a connection, the
       client will need to resolve AAAA and/or A records for
       SvcDomainName.

   4.  If only AAAA and/or A records are present for HOST (and no
       HTTPSSVC), clients should make a connection to one of the IP
       addresses contained in these records and proceed normally.

   When selecting between AAAA and A records to use, clients may use an
   approach such as [HappyEyeballsV2]





Schwartz, et al.         Expires January 9, 2020               [Page 12]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   Some possible optimizations are discussed in Section 6 to reduce
   latency impact in comparison to ordinary AAAA/A lookups.

4.2.  HTTP Strict Transport Security

   By publishing an HTTPSSVC record, the server operator indicates that
   all useful HTTP resources on that origin are reachable over HTTPS,
   similar to HTTP Strict Transport Security [HSTS].  When an HTTPSSVC
   record is present for an origin, all "http" scheme requests for that
   origin SHOULD logically be redirected to "https".

   Prior to making an "http" scheme request, the client SHOULD perform a
   lookup to determine if an HTTPSSVC record is available for that
   origin.  To do so, the client SHOULD construct a corresponding
   "https" URL as follows:

   1.  Replace the "http" scheme with "https".

   2.  If the "http" URL explicitly specifies port 80, specify port 443.

   3.  Do not alter any other aspect of the URL.

   This construction is equivalent to Section 8.3 of [HSTS] , point 5.

   If an HTTPSSVC record is present for this "https" URL, the client
   should treat this as the equivalent of receiving an HTTP "307
   Temporary Redirect" redirect to the "https" URL.  Because HTTPSSVC is
   received over an often insecure channel (DNS), clients MUST NOT place
   any more trust in this signal than if they had received a 307
   redirect over cleartext HTTP.

   If the HTTPSSVC query results in a SERVFAIL error, and the connection
   between the client and the recursive resolver is cryptographically
   protected (e.g. using TLS [RFC7858] or HTTPS [RFC8484]), the client
   SHOULD abandon the connection attempt and display an error message.
   A SERVFAIL error can occur if the domain is DNSSEC-signed, the
   recursive resolver is DNSSEC-validating, and an active attacker
   between the recursive resolver and the authoritative DNS server is
   attempting to prevent the upgrade to HTTPS.

   Similarly, if the client enforces DNSSEC validation on A/AAAA RRs, it
   SHOULD abandon the connection attempt if the HTTPSSVC RR fails to
   validate.








Schwartz, et al.         Expires January 9, 2020               [Page 13]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


4.3.  Cache interaction

   If the client has an Alt-Svc cache, and a usable Alt-Svc value is
   present in that cache, then the client SHOULD NOT issue an HTTPSSVC
   DNS query.  Instead, the client SHOULD proceed with alternative
   service connection as usual.

   If the client has a cached Alt-Svc entry that is expiring, the client
   MAY perform an HTTPSSVC query to refresh the entry.

5.  DNS Server Behaviors

   Recursive DNS servers SHOULD resolve SvcDomainName records and
   include them in the Additional Section (along with any relevant CNAME
   records).  For SvcRecordType=0, recursive DNS servers SHOULD attempt
   to resolve and include A, AAAA, and HTTPSSVC records.  For
   SvcRecordType=1, recursive DNS servers SHOULD attempt to resolve and
   include A and AAAA records.

   Authoritative DNS servers SHOULD return A, AAAA, and HTTPSSVC records
   (as well as any relevant CNAME records) in the Additional Section for
   any in-bailiwick SvcDomainNames.

6.  Performance optimizations

   For optimal performance (i.e. minimum connection setup time), clients
   SHOULD issue address (AAAA and/or A) and HTTPSSVC queries
   simultaneously, and SHOULD implement a client-side DNS cache.  With
   these optimizations in place, and conforming DNS servers, using
   HTTPSSVC does not add network latency to connection setup.

   A nonconforming recursive resolver might return an HTTPSSVC response
   with a nonempty SvcDomainName, without the corresponding address
   records.  If all the HTTPSSVC RRs in the response have nonempty
   SvcDomainName values, and the client does not have address records
   for any of these values in its DNS cache, the client SHOULD perform
   an additional address query for the selected SvcDomainName.

   The additional DNS query in this case introduces a delay.  To avoid
   causing a delay for clients using a nonconforming recursive resolver,
   domain owners SHOULD choose the SvcDomainName to be a name in the
   origin hostname's CNAME chain if possible.  This will ensure that the
   required address records are already present in the client's DNS
   cache as part of the responses to the address queries that were
   issued in parallel.

   Highly performance-sensitive clients MAY implement the following
   special- case shortcut to avoid increased connection time: if (1) one



Schwartz, et al.         Expires January 9, 2020               [Page 14]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   of the HTTPSSVC records returned has SvcRecordType=0, (2) its
   SvcDomainName is not in the DNS cache, and (3) the address queries
   for the origin domain return usable IP addresses, then the client MAY
   ignore the HTTPSSVC records and connect directly to the origin
   domain.  When the SvcDomainNames and any needed HTTPSSVC records are
   available, the client SHOULD make subsequent requests over
   connections specified by the HTTPSSVC records.

   Server operators can therefore expect that publishing HTTPSSVC
   records with SvcRecordType=0 should not cause an additional DNS query
   for performance-sensitive clients.  Server operators who wish to
   prevent this optimization should use SvcRecordType=1.

7.  Extensions to enhance privacy

7.1.  Alt-Svc parameter for ESNI keys

   An Alt-Svc "esnikeys" parameter is defined for specifying ESNI keys
   corresponding to an alternative service.  The value of the parameter
   is an ESNIKeys structure [ESNI] encoded in [base64], or the empty
   string.  ESNI-aware clients SHOULD prefer alt-values with nonempty
   esnikeys.

   This parameter MAY also be sent in Alt-Svc HTTP response headers and
   HTTP/2 ALTSVC frames.

   The Alt-Svc specification states that "the client MAY fall back to
   using the origin" in case of connection failure [AltSvc].  This
   behavior is not suitable for ESNI, because fallback would negate the
   privacy benefits of ESNI.

   Accordingly, any connection attempt that uses ESNI MUST fall back
   only to another alt-value that also has the esnikeys parameter.  If
   the parameter's value is the empty string, the client SHOULD connect
   as it would in the absence of any ESNIKeys information.

   For example, suppose a server operator has two alternatives.
   Alternative A is reliably accessible but does not support ESNI.
   Alternative B supports ESNI but is not reliably accessible.  The
   server operator could include a full esnikeys value in Alternative B,
   and mark Alternative A with esnikeys="" to indicate that fallback
   from B to A is allowed.

7.2.  Interaction with other standards

   The purpose of this standard is to reduce connection latency and
   improve user privacy.  Server operators implementing this standard
   SHOULD also implement TLS 1.3 [RFC8446] and OCSP Stapling [RFC6066],



Schwartz, et al.         Expires January 9, 2020               [Page 15]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   both of which confer substantial performance and privacy benefits
   when used in combination with HTTPSSVC records.

   To realize the greatest privacy benefits, this proposal is intended
   for use with a privacy-preserving DNS transport (like DNS over TLS
   [RFC7858] or DNS over HTTPS [RFC8484]).  However, performance
   improvements, and some modest privacy improvements, are possible
   without the use of those standards.

   This RRType could be extended to support schemes other than "https".
   Any such scheme MUST have an entry under the HTTPSSVC RRType in the
   IANA DNS Underscore Global Scoped Entry Registry [Attrleaf] The
   scheme SHOULD have an entry in the IANA URI Schemes Registry
   [RFC7595].  The scheme SHOULD be one for which Alt-Svc is defined.

8.  Security Considerations

   Alt-Svc Field Values are intended for distribution over untrusted
   channels, and clients are REQUIRED to verify that the alternative
   service is authoritative for the origin (Section 2.1 of [AltSvc]).
   Therefore, DNSSEC signing and validation are OPTIONAL for publishing
   and using HTTPSSVC records.

   TBD: expand this section in more detail.  In particular: * Just as
   with [AltSvc], clients must validate the TLS server certificate
   against hostname associated with the origin.  Clients MUST NOT use
   the SvcDomainName as any part of the server TLS certificate
   validation.  * ...

9.  IANA Considerations

   Per [RFC6895], please add the following entry to the data type range
   of the Resource Record (RR) TYPEs registry:

          +----------+------------------------+-----------------+
          | TYPE     | Meaning                | Reference       |
          +----------+------------------------+-----------------+
          | HTTPSSVC | HTTPS Service Location | (This document) |
          +----------+------------------------+-----------------+

   Per [Attrleaf], please add the following entries to the DNS
   Underscore Global Scoped Entry Registry:

      +----------+------------+-------------------+-----------------+
      | RR TYPE  | _NODE NAME | Meaning           | Reference       |
      +----------+------------+-------------------+-----------------+
      | HTTPSSVC | _https     | Alt-Svc for HTTPS | (This document) |
      +----------+------------+-------------------+-----------------+



Schwartz, et al.         Expires January 9, 2020               [Page 16]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   Per [AltSvc], please add the following entries to the HTTP Alt-Svc
   Parameter Registry:

       +-------------------+--------------------+-----------------+
       | Alt-Svc Parameter | Meaning            | Reference       |
       +-------------------+--------------------+-----------------+
       | esnikeys          | Encrypted SNI keys | (This document) |
       +-------------------+--------------------+-----------------+

10.  Acknowledgements and Related Proposals

   There have been a wide range of proposed solutions over the years to
   the "CNAME at the Zone Apex" challenge proposed.  These include
   [I-D.draft-bellis-dnsop-http-record-00],
   [I-D.draft-ietf-dnsop-aname-03], and others.

   Thank you to Ian Swett, Ralf Weber, Jon Reed, Martin Thompson, Lucas
   Pardue, Ilari Liusvaara, and others for their feedback and
   suggestions on this draft.

11.  References

11.1.  Normative References

   [AltSvc]   Nottingham, M., McManus, P., and J. Reschke, "HTTP
              Alternative Services", RFC 7838, DOI 10.17487/RFC7838,
              April 2016, <https://www.rfc-editor.org/info/rfc7838>.

   [AltSvcSNI]
              Bishop, M., "The "SNI" Alt-Svc Parameter", draft-bishop-
              httpbis-sni-altsvc-02 (work in progress), May 2018.

   [Attrleaf]
              Crocker, D., "DNS Scoped Data Through "Underscore" Naming
              of Attribute Leaves", draft-ietf-dnsop-attrleaf-16 (work
              in progress), November 2018.

   [base64]   Josefsson, S., "The Base16, Base32, and Base64 Data
              Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
              <https://www.rfc-editor.org/info/rfc4648>.

   [ESNI]     Rescorla, E., Oku, K., Sullivan, N., and C. Wood,
              "Encrypted Server Name Indication for TLS 1.3", draft-
              ietf-tls-esni-03 (work in progress), March 2019.







Schwartz, et al.         Expires January 9, 2020               [Page 17]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   [HappyEyeballsV2]
              Schinazi, D. and T. Pauly, "Happy Eyeballs Version 2:
              Better Connectivity Using Concurrency", RFC 8305,
              DOI 10.17487/RFC8305, December 2017,
              <https://www.rfc-editor.org/info/rfc8305>.

   [HSTS]     Hodges, J., Jackson, C., and A. Barth, "HTTP Strict
              Transport Security (HSTS)", RFC 6797,
              DOI 10.17487/RFC6797, November 2012,
              <https://www.rfc-editor.org/info/rfc6797>.

   [HTTP3]    Bishop, M., "Hypertext Transfer Protocol Version 3
              (HTTP/3)", draft-ietf-quic-http-20 (work in progress),
              April 2019.

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
              November 1987, <https://www.rfc-editor.org/info/rfc1035>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC2181]  Elz, R. and R. Bush, "Clarifications to the DNS
              Specification", RFC 2181, DOI 10.17487/RFC2181, July 1997,
              <https://www.rfc-editor.org/info/rfc2181>.

   [RFC3597]  Gustafsson, A., "Handling of Unknown DNS Resource Record
              (RR) Types", RFC 3597, DOI 10.17487/RFC3597, September
              2003, <https://www.rfc-editor.org/info/rfc3597>.

   [RFC6066]  Eastlake 3rd, D., "Transport Layer Security (TLS)
              Extensions: Extension Definitions", RFC 6066,
              DOI 10.17487/RFC6066, January 2011,
              <https://www.rfc-editor.org/info/rfc6066>.

   [RFC6454]  Barth, A., "The Web Origin Concept", RFC 6454,
              DOI 10.17487/RFC6454, December 2011,
              <https://www.rfc-editor.org/info/rfc6454>.

   [RFC7595]  Thaler, D., Ed., Hansen, T., and T. Hardie, "Guidelines
              and Registration Procedures for URI Schemes", BCP 35,
              RFC 7595, DOI 10.17487/RFC7595, June 2015,
              <https://www.rfc-editor.org/info/rfc7595>.






Schwartz, et al.         Expires January 9, 2020               [Page 18]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   [RFC7858]  Hu, Z., Zhu, L., Heidemann, J., Mankin, A., Wessels, D.,
              and P. Hoffman, "Specification for DNS over Transport
              Layer Security (TLS)", RFC 7858, DOI 10.17487/RFC7858, May
              2016, <https://www.rfc-editor.org/info/rfc7858>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.

   [RFC8484]  Hoffman, P. and P. McManus, "DNS Queries over HTTPS
              (DoH)", RFC 8484, DOI 10.17487/RFC8484, October 2018,
              <https://www.rfc-editor.org/info/rfc8484>.

11.2.  Informative References

   [DNSTerm]  Hoffman, P., Sullivan, A., and K. Fujiwara, "DNS
              Terminology", BCP 219, RFC 8499, DOI 10.17487/RFC8499,
              January 2019, <https://www.rfc-editor.org/info/rfc8499>.

   [HTTP]     Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing",
              RFC 7230, DOI 10.17487/RFC7230, June 2014,
              <https://www.rfc-editor.org/info/rfc7230>.

   [I-D.draft-bellis-dnsop-http-record-00]
              Bellis, R., "A DNS Resource Record for HTTP", draft-
              bellis-dnsop-http-record-00 (work in progress), November
              2018.

   [I-D.draft-ietf-dnsop-aname-03]
              Finch, T., Hunt, E., Dijk, P., Eden, A., and W. Mekking,
              "Address-specific DNS aliases (ANAME)", draft-ietf-dnsop-
              aname-03 (work in progress), April 2019.

   [RFC2782]  Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for
              specifying the location of services (DNS SRV)", RFC 2782,
              DOI 10.17487/RFC2782, February 2000,
              <https://www.rfc-editor.org/info/rfc2782>.

   [RFC6895]  Eastlake 3rd, D., "Domain Name System (DNS) IANA
              Considerations", BCP 42, RFC 6895, DOI 10.17487/RFC6895,
              April 2013, <https://www.rfc-editor.org/info/rfc6895>.





Schwartz, et al.         Expires January 9, 2020               [Page 19]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


Appendix A.  Additional examples

A.1.  Equivalence to Alt-Svc records

   The following:

www.example.com.  2H  IN CNAME   svc.example.net.
example.com.      2H  IN HTTPSSVC 0 0 svc.example.net.
svc.example.net.  2H  IN HTTPSSVC 1 2 svc3.example.net. "h3=\":8003\"; \
                                   esnikeys=\"ABC...\""
svc.example.net.  2H  IN HTTPSSVC 1 3 . "h2=\":8002\"; \
                                   esnikeys=\"123...\""

   is equivalent to the Alt-Svc record:

   Alt-Svc: h3="svc3.example.net:8003"; esnikeys="ABC..."; ma=7200, \
            h2="svc.example.net:8002"; esnikeys="123..."; ma=7200

   for the origins of both "https://www.example.com" and
   "https://example.com".

Appendix B.  Comparison with alternatives

   The HTTPSSVC record type closely resembles some existing record types
   and proposals.  A complaint with all of the alternatives is that web
   clients have seemed unenthusiastic about implementing them.  The hope
   here is that by providing an extensible solution that solves multiple
   problems we will overcome the inertia and have a path to achieve
   client implementation.

B.1.  Differences from the SRV RRTYPE

   An SRV record [RFC2782] can perform a similar function to the
   HTTPSSVC record, informing a client to look in a different location
   for a service.  However, there are several differences:

   o  SRV records are typically mandatory, whereas clients will always
      continue to function correctly without making use of Alt-Svc or
      HTTPSSVC.

   o  SRV records cannot instruct the client to switch or upgrade
      protocols, whereas Alt-Svc can signal such an upgrade (e.g. to
      HTTP/2).

   o  SRV records are not extensible, whereas Alt-Svc and thus HTTPSSVC
      can be extended with new parameters.  For example, this is what
      allows the incorporation of ESNI keys in HTTPSSVC.




Schwartz, et al.         Expires January 9, 2020               [Page 20]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   o  Using SRV records would not allow a client to skip processing of
      the Alt-Svc information in a subsequent connection, so it does not
      confer a performance advantage.

B.2.  Differences from the proposed HTTP record

   Unlike [I-D.draft-bellis-dnsop-http-record-00], this approach is
   extensible to cover Alt-Svc and ESNIKeys use-cases.  Like that
   proposal, this addresses the zone apex CNAME challenge.

   Like that proposal it remains necessary to continue to include
   address records at the zone apex for legacy clients.

B.3.  Differences from the proposed ANAME record

   Unlike [I-D.draft-ietf-dnsop-aname-03], this approach is extensible
   to cover Alt-Svc and ESNIKeys use-cases.  This approach also does not
   require any changes or special handling on either authoritative or
   master servers, beyond optionally returning in-bailiwick additional
   records.

   Like that proposal, this addresses the zone apex CNAME challenge for
   clients that implement this.

   However with this HTTPSSVC proposal it remains necessary to continue
   to include address records at the zone apex for legacy clients.  If
   deployment of this standard is successful, the number of legacy
   clients will fall over time.  As the number of legacy clients
   declines, the operational effort required to serve these users
   without the benefit of HTTPSSVC indirection should fall.  Server
   operators can easily observe how much traffic reaches this legacy
   endpoint, and may remove the apex's address records if the observed
   legacy traffic has fallen to negligible levels.

B.4.  Differences from the proposed ESNI record

   Unlike [ESNI], this approach is extensible and covers the Alt-Svc
   case as well as addresses the zone apex CNAME challenge.

   By using the Alt-Svc model we also provide a way to solve the ESNI
   multi-CDN challenges in a general case.

   Unlike ESNI, this is focused on the specific case of HTTPS, although
   this approach could be extended for other protocols.  It also allows
   specifying ESNI keys for a specific port, not an entire host.






Schwartz, et al.         Expires January 9, 2020               [Page 21]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


B.5.  SNI Alt-Svc parameter

   Defining an Alt-Svc sni= parameter (such as from [AltSvcSNI]) would
   have provided some benefits to clients and servers not implementing
   ESNI, such as for specifying that "_wildcard.example.com" could be
   sent as an SNI value rather than the full name.  There is nothing
   precluding HTTPSSVC from being used with an sni= parameter if one
   were to be defined, but it is not included here to reduce scope,
   complexity, and additional potential security and tracking risks.

Appendix C.  Design Considerations and Open Issues

   This draft is intended to be a work-in-progress for discussion.  Many
   details are expected to change with subsequent refinement.  Some
   known issues or topics for discussion are listed below.

C.1.  Record Name

   Naming is hard.  The "HTTPSSVC" is proposed as a placeholder.  Other
   names for this record might include ALTSVC, HTTPS, HTTPSSRV, B, or
   something else.

C.2.  Applicability to other schemes

   The focus of this record is on optimizing the common case of the
   "https" scheme.  It is worth discussing whether this is a valid
   assumption or if a more general solution is applicable.  Past efforts
   to over-generalize have not met with broad success.

C.3.  Wire Format

   Advice from experts in DNS wire format best practices would be
   greatly appreciated to refine the proposed details, overall.

C.4.  Extensibility of SvcRecordType

   Only values of "0" and "1" are allowed for SvcRecordType.  Should we
   give more thought to potential future values?  The current version
   tries to leave this open by indicating that resource records with
   unknown SvcRecordType values should be ignored (and perhaps should be
   switched to MUST be ignored)?

C.5.  Where to include Priority

   The SvcFieldPriority could alternately be included as a pri= Alt-Svc
   attribute.  It wouldn't be applicable for Alt-Svc returned via HTTP,
   but it is also not necessarily needed by DNS servers.  It is also not
   used when SvcRecordType=0.  A related question is whether to omit it



Schwartz, et al.         Expires January 9, 2020               [Page 22]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   from the textual representation when SvcRecordType=0.  Regardless,
   having a series of sequential numeric values in the textual
   representation has risk of user error, especially as MX, SRV, and
   others all have their own variations here.

C.6.  Whether to include Weight

   Some other similar mechanisms such as SRV have a weight in-addition
   to priority.  That is excluded here for simplicity.  It could always
   be added as an optional Alt-Svc attribute.

Appendix D.  Change history

   o  draft-nygren-httpbis-httpssvc-03

      *  Change redirect type for HSTS-style behavior from 302 to 307 to
         reduce ambiguities.

   o  draft-nygren-httpbis-httpssvc-02

      *  Remove the redundant length fields from the wire format.

      *  Define a SvcDomainName of "." for SvcRecordType=1 as being the
         HTTPSSVC RRNAME.

      *  Replace "hq" with "h3".

   o  draft-nygren-httpbis-httpssvc-01

      *  Fixes of record name.  Replace references to "HTTPSVC" with
         "HTTPSSVC".

   o  draft-nygren-httpbis-httpssvc-00

      *  Initial version

Authors' Addresses

   Ben Schwartz
   Google

   Email: bemasc@google.com


   Mike Bishop
   Akamai Technologies

   Email: mbishop@evequefou.be



Schwartz, et al.         Expires January 9, 2020               [Page 23]


Internet-Draft             HTTPSSVC RR for DNS                 July 2019


   Erik Nygren
   Akamai Technologies

   Email: erik+ietf@nygren.org















































Schwartz, et al.         Expires January 9, 2020               [Page 24]