[Search] [txt|pdfized|bibtex] [Tracker] [Email] [Nits]
Versions: 00 01                                                         
                                                          JunHyuk Song
INTERNET DRAFT                                            ChaeYong Chong
September 2001                                            SAMSUNG Elec.






            MIPv6 IPCP configuration option for PPP IPv6CP
            draft-song-pppext-mipv6-ppp-support-00.txt


Status of This Memo

   Distribution of this memo is unlimited.

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC2026.  Internet-Drafts are working
   documents of the Internet Engineering Task Force (IETF), its areas,
   and its working groups.  Note that other groups may also distribute
   working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at
   any time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at:
        http://www.ietf.org/ietf/1id-abstracts.txt
   The list of Internet-Draft Shadow Directories can be accessed at:
        http://www.ietf.org/shadow.html.




Abstract

   The Point-to-Point Protocol (PPP) [1] provides a standard method for
   transporting multi-protocol datagrams over point-to-point links.  PPP
   defines an extensible Link Control Protocol (LCP) for establishing,
   configuring, and testing the data-link connection; and a family of
   Network Control Protocols (NCPs) for establishing and configuring
   different network-layer protocols.

   The MIPv6 link local router that support Mobile Node connection via
   PPP, need to know whether the PPP client is MIPv6 node or not.
   Because the link operator may have different local policy for MIPv6
   node (ex. support of user mobility). Currently, the IPv6CP option [2]
   supports establishment and configuration of the IPv6 over PPP.
   However, MIPv6 link local router cannot differentiate IPv6 node and
   MIPv6 node which is connected over PPP.  This document defines the
   new IPCP opton for the MIPv6 support.


Song and Chong.         Expires  Feburary 2002                  [Page 1]


Internet Draft                                         24 September 2001



1. Problem Statement

   The MIPv6 Link local router which may be providing PPP connetion,
   currently cannot identify whether the connection is requested by
   Mobile IPv6 Node or IPv6 node.  The MIPv6 service is value added
   service for the operator, and the operator may want to support user
   mobility service over Mobile IPv6.  Therefore it is important to let
   local router which is a PPP termination point to be able to identify
   MIPv6 service.


2.  Configuration Options

   The Configuration Option format and basic options are already defined
   for IPCP [3].

   The most updated value of the IPCP Option Type field are specified in
   the IANA website [4].  This document concerns the following values:

       [?]      Mobile IPv6 (Pending for the IANA number assignment)


2.1.  Mobile IPv6 Option

   Description

   Some operator may want to differentiate IPv6 node and MIPv6 node.
   This mechanism let Mobile Node to specify MIPv6 service.


   A summary of the  Configuration Option format is shown
   below.  The fields are transmitted from left to right.
















Song and Chong.           Expires  Feburary 2002                [Page 2]


Internet Draft                                         24 September 2001


   The Mobile-IPv6 Configuration Option for IPCP is defined as follows:
   0                   1                   2                   3
   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |     Type      |    Length     | Interface-Identifier (MS Bytes)
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
                        Interface-Identifier (cont)
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   Interface-Identifier (LS Bytes) |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

     Type

       ?  (MIPv6)

     Length

       10

     Interface-Identifier

       The 64-bit Interface-Identifier which is very likely to be unique
       on the link or zero if a good source of uniqueness can not be
       found.

     Default

       If no valid interface identifier can be successfully negotiated,
       no default Interface-Identifier value should be assumed. The
       procedures for recovering from such a case are unspecified.
       One approach is to manually configure the interface identifier of
       the interface. [2]



3.  IANA Considerations
   Requires IPCP option number assignemnt


References
[1]  Simpson, W., "The Point-to-Point Protocol", STD 51, RFC
        1661, July 1994.

[2]  Dimitry Haskin and Ed Allen, "IP version 6 over PPP", RFC 2472
        December 1998

[3]  G. McGregor, "The PPP Internet Protocol Control Protocol (IPCP)
        May 1992

Song and Chong.           Expires  Feburary 2002                [Page 3]

Internet Draft                                         24 September 2001


[4]  www.iana.org


Addresses

Questions about this memo can be directed to the authors:

        JUNHYUK SONG

        SAMSUNG ELECTRONICS.
        Mobile Development Team
        Network Systems Division
        Phone: +82-31-779-6822
        Email: santajun@lycos.co.kr
        FAX:   +82-31-7798769

        CHAE YONG CHONG
        SAMSUNG ELECTRONICS.
        Mobile Development Team
        Network Systems Division
        Phone: +82-31-779-6822
        Email:cychong@samsung.com