ALTO                                                      M. Stiemerling
Internet-Draft                                           NEC Europe Ltd.
Intended status: Standards Track                               S. Kiesel
Expires: January 13, 2011                        University of Stuttgart
                                                           July 12, 2010


                     ALTO Deployment Considerations
                 draft-stiemerling-alto-deployments-04

Abstract

   Many Internet applications are used to access resources, such as
   pieces of information or server processes, which are available in
   several equivalent replicas on different hosts.  This includes, but
   is not limited to, peer-to-peer file sharing applications.  The goal
   of Application-Layer Traffic Optimization (ALTO) is to provide
   guidance to these applications, which have to select one or several
   hosts from a set of candidates, that are able to provide a desired
   resource.  The protocol is under specification in the ALTO working
   group.  This memo discusses deployment related issues of ALTO for
   peer-to-peer and CDNs, some preliminary security considerations, and
   also initial guidance for application designers using ALTO.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 13, 2011.

Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents



Stiemerling & Kiesel    Expires January 13, 2011                [Page 1]


Internet-Draft          Deployment Considerations              July 2010


   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
   3.  Using ALTO for Peer-to-Peer  . . . . . . . . . . . . . . . . .  7
     3.1.  Expectations of ALTO . . . . . . . . . . . . . . . . . . .  9
   4.  Using ALTO for CDNs  . . . . . . . . . . . . . . . . . . . . . 11
   5.  Cascading ALTO Servers . . . . . . . . . . . . . . . . . . . . 12
   6.  Known Limitations of ALTO  . . . . . . . . . . . . . . . . . . 14
     6.1.  Limitations of Map-based Approaches  . . . . . . . . . . . 14
     6.2.  Limitiations of Non-Map-based Approaches . . . . . . . . . 15
     6.3.  General Challenges . . . . . . . . . . . . . . . . . . . . 15
   7.  API between ALTO Client and Application  . . . . . . . . . . . 17
   8.  Security Considerations  . . . . . . . . . . . . . . . . . . . 18
     8.1.  Information Leakage from the ALTO Server . . . . . . . . . 18
     8.2.  ALTO Server Access . . . . . . . . . . . . . . . . . . . . 18
     8.3.  Faking ALTO Guidance . . . . . . . . . . . . . . . . . . . 19
   9.  Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . 20
   10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 21
     10.1. Normative References . . . . . . . . . . . . . . . . . . . 21
     10.2. Informative References . . . . . . . . . . . . . . . . . . 21
   Appendix A.  Acknowledgments . . . . . . . . . . . . . . . . . . . 23
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 24



















Stiemerling & Kiesel    Expires January 13, 2011                [Page 2]


Internet-Draft          Deployment Considerations              July 2010


1.  Introduction

   Many Internet applications are used to access resources, such as
   pieces of information or server processes, which are available in
   several equivalent replicas on different hosts.  This includes, but
   is not limited to, peer-to-peer file sharing applications and Content
   Delivery Networks (CDNs).  The goal of Application-Layer Traffic
   Optimization (ALTO) is to provide guidance to applications, which
   have to select one or several hosts from a set of candidates, that
   are able to provide a desired resource.  The basic ideas of ALTO are
   described in the problem space of ALTO is described in [RFC5693] and
   the set of requirements is discussed in [I-D.ietf-alto-reqs].

   However, there are no considerations about what operational issues
   are to be expected once ALTO will be deployed.  This includes, but is
   not limited to, location of the ALTO server, imposed load to the ALTO
   server, or from whom the queries are performed.

   Comments and discussions about this memo should be directed to the
   ALTO working group: alto@ietf.org.































Stiemerling & Kiesel    Expires January 13, 2011                [Page 3]


Internet-Draft          Deployment Considerations              July 2010


2.  Overview

   The ALTO protocol is a client/server protocol, operating between a
   number of ALTO clients and an ALTO server, as sketched in Figure 1.
   The ALTO working groups defines the ALTO protocol
   [I-D.ietf-alto-protocol].

                 +----------+
                 |  ALTO    |
                 |  Server  |
                 +----------+
                       ^
                _.-----|------.
            ,-''       |       `--.
          ,'           |           `.
         (     Network |             )
          `.           |           ,'
            `--.       |       _.-'
                `------|-----''
                       v
    +----------+  +----------+   +----------+
    |  ALTO    |  |  ALTO    |...|  ALTO    |
    |  Client  |  |  Client  |   |  Client  |
    +----------+  +----------+   +----------+

                Figure 1: Network Overview of ALTO Protocol

   The ALTO server and ALTO clients can be situated at various entities
   in a network deployment.  The first differentiation is whether the
   ALTO client is located on the actual host that runs the application,
   as shown in Figure 2, (e.g., peer-to-peer filesharing application) or
   if the ALTO client is located on resource directory, as shown in
   Figure 3 (e.g., a tracker in peer-to-peer filesharing).


















Stiemerling & Kiesel    Expires January 13, 2011                [Page 4]


Internet-Draft          Deployment Considerations              July 2010


                                                  +-----+
                                             =====|     |**
                                         ====     +-----+  *
                                     ====            *     *
                                 ====                *     *
        +-----+     +------+=====                 +-----+  *
        |     |.....|      |======================|     |  *
        +-----+     +------+=====                 +-----+  *
      Source of      ALTO        ====                *     *
      topological    service         ====            *     *
      information                        ====     +-----+  *
                                             =====|     |**
                                                  +-----+
      Legend:
      === ALTO client protocol
      *** Application protocol
      ... Provisioning protocol

          Figure 2: Overview of protocol interaction between ALTO
                     elements,scenario without tracker

   Figure 2 shows the operational model for applications that do not use
   a tracker, such as, edonky, or in if the tracker should be the
   querying party.  This use case also holds true for CDNs.  The ALTO
   server can also be queried by CDNs to get a guidance about where the
   a particular client accessing data in the CDN is exactly located in
   the ISP's network.
























Stiemerling & Kiesel    Expires January 13, 2011                [Page 5]


Internet-Draft          Deployment Considerations              July 2010


                                                  +-----+
                                                **|     |**
                                              **  +-----+  *
                                            **       *     *
                                          **         *     *
        +-----+     +------+     +-----+**        +-----+  *
        |     |.....|      |=====|     |**********|     |  *
        +-----+     +------+     +-----+**        +-----+  *
      Source of      ALTO        Resource **         *     *
      topological    service     directory  **       *     *
      information               ("tracker")   **  +-----+  *
                                                **|     |**
                                                  +-----+
                                                   Peers
      Legend:
      === ALTO client protocol
      *** Application protocol
      ... Provisioning protocol

     Figure 3: Overview of protocol interaction between ALTO elements,
                           scenario with tracker

   However, Figure 3 does not denote where the ALTO elements are
   actually located, i.e., if the tracker and the ALTO server are in the
   same ISP's domain, or if the tracker and the ALTO server are managed/
   owned/located in different domains.  The latter is the typical use
   case, e.g., taking Pirate Bay as example that serves Bittorrent peers
   world-wide.























Stiemerling & Kiesel    Expires January 13, 2011                [Page 6]


Internet-Draft          Deployment Considerations              July 2010


3.  Using ALTO for Peer-to-Peer

   This section discuss where the ALTO server can be placed and which
   entities are querying the ALTO server from what ALTO client.  The
   section assumes a P2P system relying a tracker to initially find
   other peers.  However, the tracker can be replaced by any other
   database that provides a rendezvous point for an application.  The
   limitation to a tracker is made for educational purpose, i.e. to ease
   the general understanding.
                                 ,-------.
          ,---.               ,-'         `-.   +-----------+
       ,-'     `-.           /     ISP 1     \  |   Peer 1  |*****
      /           \         / +-------------+ \ |           |    *
     /    ISP X    \   +=====>+ ALTO Server |  )+-----------+    *
    /               \  =    \ +-------------+ / +-----------+    *
   ; +-----------+   : =     \               /  |   Peer 2  |    *
   | |  Tracker  |<====+      `-.         ,-'   |           |*****
   | |ALTO Client|<====+         `-------'      +-----------+   **
   | +-----------+   | =         ,-------.                      **
   :        *        ; =      ,-'         `-.   +-----------+   **
    \       *       /  =     /     ISP 2     \  |   Peer 3  |   **
     \      *      /   =    / +-------------+ \ |           |*****
      \     *     /    +=====>| ALTO Server |  )+-----------+  ***
       `-.  *  ,-'          \ +-------------+ / +-----------+  ***
          `-*-'              \               /  |   Peer 4  |*****
            *                 `-.         ,-'   |           | ****
            *                    `-------'      +-----------+ ****
            *                                                 ****
            *                                                 ****
            ***********************************************<******
       Legend:
       === ALTO client protocol
       *** Application protocol

      Figure 4: Global tracker accessing ALTO server at various ISPs

   Figure 4 depicts a tracker-based system, where the tracker embeds the
   ALTO client.  The tracker itself is hosted and operated by an entity
   different than the ISP hosting and operating the ALTO server.
   Initially, the tracker has to look-up the ALTO server in charge for
   each peer where it receives a ALTO query for.  Therefore, the ALTO
   server has to discover the handling ALTO server, as described in
   [I-D.kiesel-alto-3pdisc].  However, the peers do not have any way to
   query the server themselves.  This setting allows to give the peers a
   better selection of candidate peers for their operation at an initial
   time, but does not consider peers learned through direct peer-to-peer
   knowledge exchange, AKA peer exchange in various peer-to-peer
   protocols.



Stiemerling & Kiesel    Expires January 13, 2011                [Page 7]


Internet-Draft          Deployment Considerations              July 2010


                            ,-------.         +-----------+
          ,---.          ,-'         `-.  +==>|   Peer 1  |*****
       ,-'     `-.      /     ISP 1     \ =   |ALTO Client|    *
      /           \    / +-------------+<=+   +-----------+    *
     /    ISP X    \   | + ALTO Server |<=+   +-----------+    *
    /               \  \ +-------------+ /=   |   Peer 2  |    *
   ;   +---------+   :  \               / +==>|ALTO Client|*****
   |   | Global  |   |   `-.         ,-'      +-----------+   **
   |   | Tracker |   |      `-------'                         **
   |   +---------+   |      ,-------.         +-----------+   **
   :        *        ;   ,-'         `-.  +==>|   Peer 3  |   **
    \       *       /   /     ISP 2     \ =   |ALTO Client|*****
     \      *      /   / +-------------+<=+   +-----------+  ***
      \     *     /    | | ALTO Server |<=+   +-----------+  ***
       `-.  *  ,-'     \ +-------------+ /=   |   Peer 4  |*****
          `-*-'         \               / +==>|ALTO Client| ****
            *            `-.         ,-'      +-----------+ ****
            *               `-------'                       ****
            *                                               ****
            ***********************************************<****
       Legend:
       === ALTO client protocol
       *** Application protocol



               Figure 5: Global Tracker - Local ALTO Servers

   The scenario in Figure 5 lets the peers directly communicate with
   their ISP's ALTO server (i.e., ALTO client embedded in the peers),
   giving thus the peers the most control on which information they
   query for, as they can integrate information received from trackers
   and through direct peer-to-peer knowledge exchange.


















Stiemerling & Kiesel    Expires January 13, 2011                [Page 8]


Internet-Draft          Deployment Considerations              July 2010


                             ,-------.         +-----------+
           ,---.          ,-'  ISP 1  `-.  ***>|   Peer 1  |
        ,-'     `-.      /+-------------+\ *   |           |
       /           \    / +   Tracker   |<**   +-----------+
      /    ISP X    \   | +-----===-----+<**   +-----------+
     /               \  \ +-----===-----+ /*   |   Peer 2  |
    ;   +---------+   :  \+ ALTO Server |/ ***>|           |
    |   | Global  |   |   +-------------+      +-----------+
    |   | Tracker |   |      `-------'
    |   +---------+   |                        +-----------+
    :          ^      ;      ,-------.         |   Peer 3  |
     \         *     /    ,-'  ISP 2  `-.  ***>|           |
      \        *    /    /+-------------+\ *   +-----------+
       \       *   /    / +   Tracker   |<**   +-----------+
        `-.    *,-'     | +-----===-----+ |    |   Peer 4  |<*
           `---*        \ +-----===-----+ /    |           | *
               *         \+ ALTO Server |/     +-----------+ *
               *          +-------------+                    *
               *             `-------'                       *
               ***********************************************
        Legend:
        === ALTO client protocol
        *** Application protocol

      Figure 6: P4P approach with local tracker and local ALTO server

   There are some attempts to let ISP's to deploy their own trackers, as
   shown in Figure 6.  In this case, the client has no chance to get
   guidance from the ALTO server, other than talking to the ISP's
   tracker.  However, the peers would have still chance the contact
   other trackers, deployed by entities other than the peer's ISP.

   Figure 6 and Figure 4 ostensibly take peers the possibility to
   directly query the ALTO server, if the communication with the ALTO
   server is not permitted for any reason.  However, considering the
   plethora of different applications of ALTO, e.g., multiple tracker
   and non-tracker based P2P systems and or applications searching for
   relays, it seems to be beneficial for all participants to let the
   peers directly query the ALTO server.  The peers are also the single
   point having all operational knowledge to decide whether to use the
   ALTO guidance and how to use the ALTO guidance.  This is a preference
   for the scenario depicted in Figure Figure 5.

3.1.  Expectations of ALTO

   This section hints to some recent experiments conducted with ALTO-
   like deployments in Internet Service Provider (ISP) network's.  NTT
   performed tests with their HINT server implementation and dummy nodes



Stiemerling & Kiesel    Expires January 13, 2011                [Page 9]


Internet-Draft          Deployment Considerations              July 2010


   to gain insight on how an ALTO-like service influence a peer-to-peer
   systems [I-D.kamei-p2p-experiments-japan].  The results of an early
   experiment conducted in the Comcast network are documented
   here[RFC5632]















































Stiemerling & Kiesel    Expires January 13, 2011               [Page 10]


Internet-Draft          Deployment Considerations              July 2010


4.  Using ALTO for CDNs

   Section 3 discussed the placement and usage of ALTO for P2P systems,
   but not beyond.  This section discuss the usage of ALTO for Content
   Delivery Networks (CDNs).  CDNs are used to bring a service (e.g., a
   web page, videos, etc) closer to the location of the user - where
   close refers to shorten the distance between the client and the
   server in the IP topology.  CDNs use several techniques to decide
   which server is closest to a client requesting a service.  One common
   way to do so, is relying on the DNS system, but there are many other
   ways, see [RFC3568].

   The general issue for CDNs, independent of DNS or HTTP Redirect based
   approaches (see, for instance, [I-D.penno-alto-cdn]), is that the CDN
   logic has to match the client's IP address with the closest CDN
   cache.  This matching is not trivial, for instance, in DNS based
   approaches, where the IP address of the DNS original requester is
   unknown (see [I-D.vandergaast-edns-client-ip] for a discussion of
   this and a solution approach).
































Stiemerling & Kiesel    Expires January 13, 2011               [Page 11]


Internet-Draft          Deployment Considerations              July 2010


5.  Cascading ALTO Servers

   The main assumptions of ALTO seems to be each ISP operates its own
   ALTO server independently, irrespectively of the ISP's situation.
   This may true for most envisioned deployments of ALTO but there are
   certain deployments that may have different settings.  Figure 7 shows
   such setting, were for example, a university network is connected to
   two upstream providers.  ISP2 if the national research network and
   ISP1 is a commercial upstream provider to this university network.
   The university, as well as ISP1, are operating their own ALTO server.
   The ALTO clients, located on the peers will contact the ALTO server
   located at the university.


         +-----------+
         |   ISP1    |
         |   ALTO    |
         |  Server   |
         +----------=+
            ,-------=            ,------.
         ,-'        =`-.      ,-'         `-.
        /   Upstream=   \    /   Upstream    \
       (       ISP1 =    )  (       ISP2      )
        \           =   /    \               /
         `-.        =,-'      `-.         ,-'
            `---+---=            `+------'
                |   =             |
                |   =======================
                |,-------------.  |       =
              ,-+               `-+    +-----------+
            ,'      University     `.  |University |
           (        Network          ) |   ALTO    |
            `.  =======================|  Server   |
              `-=               +-'    +-----------+
                =`+------------'|
                = |             |
         +--------+-+         +-+--------+
         |   Peer1  |         |   PeerN  |
         +----------+         +----------+

                      Figure 7: Cascaded ALTO Server

   In this setting all "destinations" useful for the peers within ISP2
   are free-of-charge for the peers located in the university network
   (i.e., they are preferred in the rating of the ALTO server).
   However, all traffic that is not towards ISP2 will be handled by the
   ISP1 upstream provider.  Therefore, the ALTO server at the university
   has also to include the guidance given by the ISP1 ALTO server in its



Stiemerling & Kiesel    Expires January 13, 2011               [Page 12]


Internet-Draft          Deployment Considerations              July 2010


   replies to the ALTO clients.  This can be called cascaded ALTO
   servers.

















































Stiemerling & Kiesel    Expires January 13, 2011               [Page 13]


Internet-Draft          Deployment Considerations              July 2010


6.  Known Limitations of ALTO

   This section describes some known limitations of ALTO in general or
   specific mechanisms in ALTO.

6.1.  Limitations of Map-based Approaches

   The specification of the ALTO protocol [I-D.ietf-alto-protocol] uses,
   amongst others mechanism, so-called network maps.  The network map
   approach uses Host Group Descriptors that group one or multiple
   subnetworks (i.e., IP prefixes) to a single Host Group Descriptor.  A
   set of IP prefixes is called partition and the associated Host Group
   Descriptor is called partition ID.  The "costs" between the various
   partition IDs is stored in a second map, the cost map.  Map-based
   approaches are chosen as they lower the signaling load on the server,
   as the maps have only to be retrieved if they are changed.

   The main assumption for map-based approaches is that the information
   provided in these maps is static for a longer period of time, where
   this period of time refers to days, but not hours or even minutes.
   This assumption is fine, as long as the network operator does not
   change any parameter, e.g., routing within the network and to the
   upstream peers, IP address assignment stays stable (and thus the
   mapping to the partitions).  However, there are several cases where
   this assumption is not valid, as:

   1.  ISPs reallocate IPv4 subnets from time to time;

   2.  ISPs reallocate IPv4 subnets on short notice;

   3.  IP prefix blocks may be assigned to a single DSLAM which serves a
       variety of access networks.

   For 1): ISPs reallocate IPv4 subnets within their infrastructure from
   time to time, partly to ensure the efficient usage of IPv4 addresses
   (a scarce resource), and partly to enable efficient route tables
   within their network routers.  The frequency of these "renumbering
   events" depend on the growth in number of subscribers and the
   availability of address space within the ISP.  As a result, a
   subscriber's household device could retain an IPv4 address for as
   short as a few minutes, or for months at a time or even longer.

      Some folks have suggested that ISPs providing ALTO services could
      sub-divide their subscribers' devices into different IPv4 subnets
      (or certain IPv4 address ranges) based on the purchased service
      tier, as well as based on the location in the network topology.
      The problem is that this sub-allocation of IPv4 subnets tends to
      decrease the efficiency of IPv4 address allocation.  A growing ISP



Stiemerling & Kiesel    Expires January 13, 2011               [Page 14]


Internet-Draft          Deployment Considerations              July 2010


      that needs to maintain high efficiency of IPv4 address utilization
      may be reluctant to jeopardize their future acquisition of IPv4
      address space.

   However, this is not an issue for map-based approaches if changes are
   applied in the order of days.

   For 2): ISPs can use techniques, such as ODAP (XXX) that allow the
   reallocation of IP prefixes on very short notice, i.e., within
   minutes.  An IP prefix that has no IP address assignment to a host
   anymore can be reallocate to areas where there is currently a high
   demand for IP addresses.

   For 3): In DSL-based access networks, IP prefixes are assigned to
   DSLAMs which are the first IP-hop in the access-network between the
   CPE and the Internet.  The access-network between CPE and DSLAM
   (called aggregation network) can have varying characteristics (and
   thus associated costs), but still using the same IP prefix.  For
   instance one IP addresses IP11 out of a IP prefix IP1 can be assigned
   to a VDSL (e.g., 2 MBit/s uplink) access-line while the subsequent IP
   address IP12 is assigned to a slow ADSL line (e.g., 128 kbit/s
   uplink).  These IP addresses are assigned on a first come first
   served basis, i.e., the a single IP address out of the same IP prefix
   can change its associated costs quite fast.  This may not be an issue
   with respect to the used upstream provider (thus the cross ISP
   traffic) but depending on the capacity of the aggregation-network
   this may raise to an issue.

6.2.  Limitiations of Non-Map-based Approaches

   The specification of the ALTO protocol [I-D.ietf-alto-protocol] uses,
   amongst others mechanism, a mechanism called Endpoint Cost Service.
   ALTO clients can ask guidance for specific IP addresses to the ALTO
   server.  However, asking for IP addresses, asking with long lists of
   IP addresses, and asking quite frequent may overload the ALTO server.
   The server has to rank each received IP address which causes load at
   the server.  This may be amplified by the fact that not only a single
   ALTO client is asking for guidance, but a larger number of them.

   Caching of IP addresses at the ALTO client or the usage of the H12
   approach [I-D.kiesel-alto-h12] in conjunction with caching may lower
   the query load on the ALTO server.

6.3.  General Challenges

   An ALTO server stores information about preferences (e.g., a list of
   preferred autonomous systems, IP ranges, etc) and ALTO clients can
   retrieve these preferences.  However, there are basically two



Stiemerling & Kiesel    Expires January 13, 2011               [Page 15]


Internet-Draft          Deployment Considerations              July 2010


   different approaches on where the preferences are actually processed:

   1.  The ALTO server has a list of preferences and clients can
       retrieve this list via the ALTO protocol.  This preference list
       can be partially updated by the server.  The actual processing of
       the data is done on the client and thus there is no data of the
       client's operation revealed to the ALTO server .

   2.  The ALTO server has a list of preferences or preferences
       calculated during runtime and the ALTO client is sending
       information of its operation (e.g., a list of IP addresses) to
       the server.  The server is using this operational information to
       determine its preferences and returns these preferences (e.g., a
       sorted list of the IP addresses) back to the ALTO client.

   Approach 1 (we call it H1) has the advantage (seen from the client)
   that all operational information stays within the client and is not
   revealed to the provider of the server.  On the other hand, does
   approach 1 require that the provider of the ALTO server, i.e., the
   network operator, reveals information about its network structure
   (e.g., AS numbers, IP ranges, topology information in general) to the
   ALTO client.

   Approach 2 (we call it H2) has the advantage (seen from the operator)
   that all operational information stays with the ALTO server and is
   not revealed to the ALTO client.  On the other hand, does approach 2
   require that the clients send their operational information to the
   server.

   Both approaches have their pros and cons and are extensively
   discussed on the ALTO mailing list.  But there is basically a
   dilemma: Approach 1 is seen as the only working solution by peer-to-
   peer software vendors and approach 2 is seen as the only working by
   the network operators.  But neither the software vendors nor the
   operators seem to willing to change their position.  However, there
   is the need to get both sides on board, to come to a solution.















Stiemerling & Kiesel    Expires January 13, 2011               [Page 16]


Internet-Draft          Deployment Considerations              July 2010


7.  API between ALTO Client and Application

   This sections gives some informational guidance on how the interface
   between the actual application using the ALTO guidance and the ALTO
   client can look like.

   This is still TBD.












































Stiemerling & Kiesel    Expires January 13, 2011               [Page 17]


Internet-Draft          Deployment Considerations              July 2010


8.  Security Considerations

   The ALTO protocol itself, as well as, the ALTO client and server
   raise new security issues beyond the one mentioned in
   [I-D.ietf-alto-protocol] and issues related to message transport over
   the Internet.  For instance, Denial of Service (DoS) is of interest
   for the ALTO server and also for the ALTO client.  A server can get
   overloaded if too many TCP requests hit the server, or if the query
   load of the server surpasses the maximum computing capacity.  An ALTO
   client can get overloaded if the responses from the sever are, either
   intentionally or due to an implementation mistake, too large to be
   handled by that particular client.

8.1.  Information Leakage from the ALTO Server

   The ALTO server will be provisioned with information about the owning
   ISP's network and very likely also with information about neighboring
   ISPs.  This information (e.g., network topology, business relations,
   etc) is consider to be confidential to the ISP and must not be
   revealed.

   The ALTO server will naturally reveal parts of that information in
   small doses to peers, as the guidance given will depend on the above
   mentioned information.  This is seen beneficial for both parties,
   i.e., the ISP's and the peer's.  However, there is the chance that
   one or multiple peers are querying an ALTO server with the goal to
   gather information about network topology or any other data
   considered confidential or at least sensitive.  It is unclear whether
   this is a real technical security risk or whether this is more a
   perceived security risk.

8.2.  ALTO Server Access

   Depending on the use case of ALTO, several access restrictions to an
   ALTO server may or may not apply.  For an ALTO server that is solely
   accessible by peers from the ISP network (as shown in Figure 5), for
   instance, the source IP address can be used to grant only access from
   that ISP network to the server.  This will "limit" the number of
   peers able to attack the server to the user's of the ISP (however,
   including botnet computers).

   On the other hand, if the ALTO server has to be accessible by parties
   not located in the ISP's network (see Figure Figure 4), e.g., by a
   third-party tracker or by a CDN system outside the ISP's network, the
   access restrictions have to be more loose.  In the extreme case,
   i.e., no access restrictions, each and every host in the Internet can
   access the ALTO server.  This might no the intention of the ISP, as
   the server is not only subject to more possible attacks, but also on



Stiemerling & Kiesel    Expires January 13, 2011               [Page 18]


Internet-Draft          Deployment Considerations              July 2010


   the load imposed to the server, i.e., possibly more ALTO clients to
   serve and thus more work load.

8.3.  Faking ALTO Guidance

   It has not yet been investigated how a faked or wrong ALTO guidance
   by an ALTO server can impact the operation of the network and also
   the peers.

   Here is a list of examples how the ALTO guidance could be faked and
   what possible consequences may arise:

   Sorting  An attacker could change to sorting order of the ALTO
      guidance (given that the order is of importance, otherwise the
      ranking mechanism is of interest), i.e., declaring peers located
      outside the ISP as peers to be preferred.  This will not pose a
      big risk to the network or peers, as it would mimic the "regular"
      peer operation without traffic localization, apart from the
      communication/processing overhead for ALTO.  However, it could
      mean that ALTO is reaching the opposite goal of shuffling more
      data across ISP boundaries, incurring more costs for the ISP.

   Preference of a single peer  A single IP address (thus a peer) could
      be marked as to be preferred all over other peers.  This peer can
      be located within the local ISP or also in other parts of the
      Internet (e.g., a web server).  This could lead to the case that
      quite a number of peers to trying to contact this IP address,
      possibly causing a Denial of Service (DoS) attack.

   This section is solely giving a first shot on security issues related
   to ALTO deployments.




















Stiemerling & Kiesel    Expires January 13, 2011               [Page 19]


Internet-Draft          Deployment Considerations              July 2010


9.  Conclusion

   This is the first version of the deployment considerations and for
   sure the considerations are yet incomplete and imprecise.















































Stiemerling & Kiesel    Expires January 13, 2011               [Page 20]


Internet-Draft          Deployment Considerations              July 2010


10.  References

10.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3568]  Barbir, A., Cain, B., Nair, R., and O. Spatscheck, "Known
              Content Network (CN) Request-Routing Mechanisms",
              RFC 3568, July 2003.

10.2.  Informative References

   [I-D.ietf-alto-protocol]
              Alimi, R., Penno, R., and Y. Yang, "ALTO Protocol",
              draft-ietf-alto-protocol-04 (work in progress), May 2010.

   [I-D.ietf-alto-reqs]
              Kiesel, S., Previdi, S., Stiemerling, M., Woundy, R., and
              Y. Yang, "Application-Layer Traffic Optimization (ALTO)
              Requirements", draft-ietf-alto-reqs-05 (work in progress),
              June 2010.

   [I-D.kamei-p2p-experiments-japan]
              Kamei, S., Momose, T., Inoue, T., and T. Nishitani, "ALTO-
              Like Activities and Experiments in P2P Network Experiment
              Council", draft-kamei-p2p-experiments-japan-03 (work in
              progress), May 2010.

   [I-D.kiesel-alto-3pdisc]
              Kiesel, S., Tomsu, M., Schwan, N., Scharf, M., and M.
              Stiemerling, "Third-party ALTO server discovery",
              draft-kiesel-alto-3pdisc-03 (work in progress), July 2010.

   [I-D.kiesel-alto-h12]
              Kiesel, S. and M. Stiemerling, "ALTO H12",
              draft-kiesel-alto-h12-02 (work in progress), March 2010.

   [I-D.penno-alto-cdn]
              Penno, R., Raghunath, S., Medved, J., Bakshi, M., Alimi,
              R., and S. Previdi, "ALTO and Content Delivery Networks",
              draft-penno-alto-cdn-00 (work in progress), June 2010.

   [I-D.vandergaast-edns-client-ip]
              Contavalli, C., Gaast, W., Leach, S., and D. Rodden,
              "Client IP information in DNS requests",
              draft-vandergaast-edns-client-ip-01 (work in progress),
              May 2010.



Stiemerling & Kiesel    Expires January 13, 2011               [Page 21]


Internet-Draft          Deployment Considerations              July 2010


   [RFC5632]  Griffiths, C., Livingood, J., Popkin, L., Woundy, R., and
              Y. Yang, "Comcast's ISP Experiences in a Proactive Network
              Provider Participation for P2P (P4P) Technical Trial",
              RFC 5632, September 2009.

   [RFC5693]  Seedorf, J. and E. Burger, "Application-Layer Traffic
              Optimization (ALTO) Problem Statement", RFC 5693,
              October 2009.











































Stiemerling & Kiesel    Expires January 13, 2011               [Page 22]


Internet-Draft          Deployment Considerations              July 2010


Appendix A.  Acknowledgments

   Martin Stiemerling is partially supported by the NAPA-WINE project
   (Network-Aware P2P-TV Application over Wise Networks,
   http://www.napa-wine.org), a research project supported by the
   European Commission under its 7th Framework Program (contract no.
   214412).  The views and conclusions contained herein are those of the
   authors and should not be interpreted as necessarily representing the
   official policies or endorsements, either expressed or implied, of
   the NAPA-WINE project or the European Commission.









































Stiemerling & Kiesel    Expires January 13, 2011               [Page 23]


Internet-Draft          Deployment Considerations              July 2010


Authors' Addresses

   Martin Stiemerling
   NEC Laboratories Europe/University of Goettingen
   Kurfuerstenanlage 36
   Heidelberg  69115
   Germany

   Phone: +49 6221 4342 113
   Fax:   +49 6221 4342 155
   Email: martin.stiemerling@neclab.eu
   URI:   http://www.nw.neclab.eu/


   Sebastian Kiesel
   University of Stuttgart, Computing Center
   Allmandring 30
   Stuttgart  70550
   Germany

   Email: ietf-alto@skiesel.de






























Stiemerling & Kiesel    Expires January 13, 2011               [Page 24]